Kajol Jain [Thu, 27 Jan 2022 07:20:12 +0000 (12:50 +0530)]
selftests/powerpc/pmu: Add interface test for mmcra register fields
The testcase uses event code 0x35340401e0 to verify the settings for
different fields in Monitor Mode Control Register A (MMCRA). The fields
include thresh_start, thresh_stop thresh_select, sdar mode, sample and
marked bit. Checks if these fields are translated correctly via perf
interface to MMCRA.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-21-kjain@linux.ibm.com
Kajol Jain [Thu, 27 Jan 2022 07:20:11 +0000 (12:50 +0530)]
selftests/powerpc/pmu/: Add interface test for mmcr3_src fields
The testcase uses event code 0x1340000001c040 to verify the settings for
different src fields in Monitor Mode Control Register 3 (MMCR3). Checks
if these fields are translated correctly via perf interface to MMCR3 on
ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-20-kjain@linux.ibm.com
Madhavan Srinivasan [Thu, 27 Jan 2022 07:20:10 +0000 (12:50 +0530)]
selftests/powerpc/pmu/: Add interface test for mmcr2_fcs_fch fields
The testcases uses cycles event to verify the freeze counter settings in
Monitor Mode Control Register 2 (MMCR2). Event modifier (exclude_kernel)
setting is used for the event attribute to check the FCxS and FCxH (
Freeze counter in privileged and hypervisor state ) settings via perf
interface.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, check MSR for MSR_HV, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-19-kjain@linux.ibm.com
Madhavan Srinivasan [Thu, 27 Jan 2022 07:20:09 +0000 (12:50 +0530)]
selftests/powerpc/pmu/: Add interface test for mmcr2_l2l3 field
The testcases uses event code 0x010000046080 to verify the l2l3 bit
setting for Monitor Mode Control Register 2 (MMCR2). check if this bit
is set correctly via perf interface in ISA v3.1 platform.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-18-kjain@linux.ibm.com
Athira Rajeev [Thu, 27 Jan 2022 07:20:07 +0000 (12:50 +0530)]
selftests/powerpc/pmu/: Add interface test for mmcr1_comb field
The testcase uses event code "0x26880" to verify the settings for
different fields in Monitor Mode Control Register 1 (MMCR1). The field
include PMCxCOMB. Checks if this field are translated correctly via perf
interface to MMCR1
Add selftest for mmcr1 comb field.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-16-kjain@linux.ibm.com
Athira Rajeev [Thu, 27 Jan 2022 07:20:06 +0000 (12:50 +0530)]
selftests/powerpc/pmu/: Add interface test for mmcr0_pmc56 using pmc5
The testcase uses event code 0x500fa to verify the FC5-6 bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if FC5-6 bit is not set
in MMCR0 when using Performance Monitor Counter 5 and 6 (PMC5 and PMC6).
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-15-kjain@linux.ibm.com
Athira Rajeev [Thu, 27 Jan 2022 07:20:05 +0000 (12:50 +0530)]
selftests/powerpc/pmu/: Add interface test for mmcr0_fc56 field using pmc1
The testcase uses event code 0x1001e to verify two bit settings (FC5-6
and PMC1CE) in Monitor Mode Control Register 0 (MMCR0). Check if FC5-6
bit to be set in MMCR0 when not using Performance Monitor Counter 5 and
6 (PMC5 and PMC6). And also PMC1CE is expected to be set when using
PMC1. Test if these fields are programmed correctly via perf interface.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-14-kjain@linux.ibm.com
Athira Rajeev [Thu, 27 Jan 2022 07:20:04 +0000 (12:50 +0530)]
selftests/powerpc/pmu/: Add interface test for mmcr0_pmcjce field
The testcase uses event code 0x500fa ("instructions") to verify the
PMCjCE bit setting in Monitor Mode Control Register 0 (MMCR0). This bit
is expected to be set in MMCR0 when using Performance Monitor Counter
5 (PMC5). Checks if perf interface sets this bit correctly.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-13-kjain@linux.ibm.com
Athira Rajeev [Thu, 27 Jan 2022 07:20:03 +0000 (12:50 +0530)]
selftests/powerpc/pmu/: Add interface test for mmcr0_pmccext bit
The testcase uses cycles event to check the PMCCEXT bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if perf interface sets
this control bit in MMCR0 on ISA v3.1 platform.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-12-kjain@linux.ibm.com
Athira Rajeev [Thu, 27 Jan 2022 07:20:02 +0000 (12:50 +0530)]
selftests/powerpc/pmu/: Add interface test for mmcr0_cc56run field
The testcase uses event code 0x500fa ("instructions") to check the
CC56RUN bit setting in Monitor Mode Control Register 0(MMCR0). In ISA
v3.1 platform, this bit is expected to be set in MMCR0 when using
Performance Monitor Counter 5 and 6 (PMC5 and PMC6). Verify this is done
correctly by perf interface.
CC56RUN bit makes PMC5 and PMC6 count regardless of the run latch state.
This bit is set in power10 since PMC5 and PMC6 is used in power10 for
counting instructions and cycles. Hence added a check to skip this test
in other platforms
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-11-kjain@linux.ibm.com
Athira Rajeev [Thu, 27 Jan 2022 07:20:01 +0000 (12:50 +0530)]
selftests/powerpc/pmu/: Add interface test for mmcr0 exception bits
The testcase uses "instructions" event to verify two bits(PMAE and PMAO)
in Monitor Mode Control Register 0 (MMCR0). At the time of interrupt,
pmae bit ( which enables performance monitor exception ) is expected to
be cleared and pmao (which indicates performance monitor alert) bit is
expected to be set in MMCR0. And testcases handles these checks.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-10-kjain@linux.ibm.com
Kajol Jain [Thu, 27 Jan 2022 07:20:00 +0000 (12:50 +0530)]
selftests/powerpc/pmu: Add macro to extract mmcr3 and mmcra fields
Add macro and utility functions to fetch individual fields from Monitor
Mode Control Register 3(MMCR3)and Monitor Mode Control Register A(MMCRA)
PMU registers
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-9-kjain@linux.ibm.com
Athira Rajeev [Thu, 27 Jan 2022 07:19:59 +0000 (12:49 +0530)]
selftests/powerpc/pmu: Add macro to extract mmcr0/mmcr1 fields
Add macro and utility functions to fetch individual fields from Monitor
Mode Control Register 0(MMCR0) and Monitor Mode Control Register
1(MMCR1) PMU register.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-8-kjain@linux.ibm.com
Madhavan Srinivasan [Thu, 27 Jan 2022 07:19:58 +0000 (12:49 +0530)]
selftests/powerpc/pmu: Add macros to extract mmcr fields
Along with it, Add macros and utility functions to fetch individual
fields from Monitor Mode Control Register 2(MMCR2) register.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-7-kjain@linux.ibm.com
Madhavan Srinivasan [Thu, 27 Jan 2022 07:19:57 +0000 (12:49 +0530)]
selftests/powerpc/pmu: Add event_init_sampling function
Extended event_init_opts() to include initialization of sampling
testcases. Patch adds an event_init_sampling() wrapper to initialize
event attribute fields for sampling events. This includes initializing
sample period, sample type and event type.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-6-kjain@linux.ibm.com
Kajol Jain [Thu, 27 Jan 2022 07:19:56 +0000 (12:49 +0530)]
selftests/powerpc/pmu: Add utility functions to post process the mmap buffer
Add couple of basic utility functions to post process the mmap buffer.
It includes function to read the total number of samples present in the
mmap buffer and function to get the address of the first sample.
Add function "get_intr_regs" which will return pointer to interrupt
registers present in the sample, incase sample type
PERF_SAMPLE_REGS_INTR is set.
Add functions "get_reg_value" which can be used to read any interrupt
register value from a given sample.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-5-kjain@linux.ibm.com
Madhavan Srinivasan [Thu, 27 Jan 2022 07:19:55 +0000 (12:49 +0530)]
selftests/powerpc/pmu: Add macros to parse event codes
Each platform has raw event encoding format which specifies the bit
positions for different fields. The fields from event code gets
translated into performance monitoring mode control register (MMCRx)
settings. Patch add macros to extract individual fields from the event
code.
Add functions for sanity checks, since testcases currently are only
supported in power9 and power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Read PVR directly rather than using /proc/cpuinfo]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-4-kjain@linux.ibm.com
Athira Rajeev [Thu, 27 Jan 2022 07:19:54 +0000 (12:49 +0530)]
selftests/powerpc/pmu: Add support for perf sampling tests
Add support functions for enabling perf sampling test in a new folder
"sampling_tests" under "selftests/powerpc/pmu". This includes support
functions for allocating and processing the mmap buffer. These functions
are added/defined in "sampling_tests/misc.*" files.
Also updates the corresponding Makefiles in "selftests/powerpc" and
"sampling_tests" folder.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Drop unneeded bits from the Makefile]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-3-kjain@linux.ibm.com
Athira Rajeev [Thu, 27 Jan 2022 07:19:53 +0000 (12:49 +0530)]
selftests/powerpc/pmu: Include mmap_buffer field as part of struct event
To enable the capturing of samples as part of perf event, add a new
field "mmap_buffer" to "struct event". This field is a place-holder for
sample collection
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-2-kjain@linux.ibm.com
Guo Zhengkui [Wed, 23 Feb 2022 07:54:23 +0000 (15:54 +0800)]
powerpc/module_64: fix array_size.cocci warning
Fix following coccicheck warning:
./arch/powerpc/kernel/module_64.c:432:40-41: WARNING: Use ARRAY_SIZE.
ARRAY_SIZE(arr) is a macro provided by the kernel. It makes sure that arr
is an array, so it's safer than sizeof(arr) / sizeof(arr[0]) and more
standard.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220223075426.20939-1-guozhengkui@vivo.com
Nicholas Piggin [Fri, 4 Feb 2022 03:53:48 +0000 (13:53 +1000)]
powerpc/64s/hash: Make hash faults work in NMI context
Hash faults are not resoved in NMI context, instead causing the access
to fail. This is done because perf interrupts can get backtraces
including walking the user stack, and taking a hash fault on those could
deadlock on the HPTE lock if the perf interrupt hits while the same HPTE
lock is being held by the hash fault code. The user-access for the stack
walking will notice the access failed and deal with that in the perf
code.
The reason to allow perf interrupts in is to better profile hash faults.
The problem with this is any hash fault on a kernel access that happens
in NMI context will crash, because kernel accesses must not fail.
Hard lockups, system reset, machine checks that access vmalloc space
including modules and including stack backtracing and symbol lookup in
modules, per-cpu data, etc could all run into this problem.
Fix this by disallowing perf interrupts in the hash fault code (the
direct hash fault is covered by MSR[EE]=0 so the PMI disable just needs
to extend to the preload case). This simplifies the tricky logic in hash
faults and perf, at the cost of reduced profiling of hash faults.
perf can still latch addresses when interrupts are disabled, it just
won't get the stack trace at that point, so it would still find hot
spots, just sometimes with confusing stack chains.
An alternative could be to allow perf interrupts here but always do the
slowpath stack walk if we are in nmi context, but that slows down all
perf interrupt stack walking on hash though and it does not remove as
much tricky code.
Reported-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204035348.545435-1-npiggin@gmail.com
Christophe Leroy [Tue, 22 Feb 2022 14:05:30 +0000 (15:05 +0100)]
powerpc: Remove remaining stab codes
Following commit
12318163737c ("powerpc/32: Remove remaining .stabs
annotations"), stabs code are not used anymore.
Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d8b33342d7454f6ca4f368f5206896558dfa06f4.1645538722.git.christophe.leroy@csgroup.eu
Vaibhav Jain [Mon, 24 Jan 2022 20:22:04 +0000 (01:52 +0530)]
powerpc/papr_scm: Implement initial support for injecting smart errors
Presently PAPR doesn't support injecting smart errors on an
NVDIMM. This makes testing the NVDIMM health reporting functionality
difficult as simulating NVDIMM health related events need a hacked up
qemu version.
To solve this problem this patch proposes simulating certain set of
NVDIMM health related events in papr_scm. Specifically 'fatal' health
state and 'dirty' shutdown state. These error can be injected via the
user-space 'ndctl-inject-smart(1)' command. With the proposed patch and
corresponding ndctl patches following command flow is expected:
$ sudo ndctl list -DH -d nmem0
...
"health_state":"ok",
"shutdown_state":"clean",
...
# inject unsafe shutdown and fatal health error
$ sudo ndctl inject-smart nmem0 -Uf
...
"health_state":"fatal",
"shutdown_state":"dirty",
...
# uninject all errors
$ sudo ndctl inject-smart nmem0 -N
...
"health_state":"ok",
"shutdown_state":"clean",
...
The patch adds a new member 'health_bitmap_inject_mask' inside struct
papr_scm_priv which is then bitwise ANDed to the health bitmap fetched from the
hypervisor. The value for 'health_bitmap_inject_mask' is accessible from sysfs
at nmemX/papr/health_bitmap_inject.
A new PDSM named 'SMART_INJECT' is proposed that accepts newly
introduced 'struct nd_papr_pdsm_smart_inject' as payload thats
exchanged between libndctl and papr_scm to indicate the requested
smart-error states.
When the processing the PDSM 'SMART_INJECT', papr_pdsm_smart_inject()
constructs a pair or 'inject_mask' and 'clear_mask' bitmaps from the payload
and bit-blt it to the 'health_bitmap_inject_mask'. This ensures the after being
fetched from the hypervisor, the health_bitmap reflects requested smart-error
states.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124202204.1488346-1-vaibhav@linux.ibm.com
Christophe Leroy [Tue, 15 Feb 2022 18:31:25 +0000 (19:31 +0100)]
powerpc/ftrace: Style cleanup in ftrace_mprofile.S
Add some line breaks to better match the file's style, add
some space after comma and fix a couple of misplaced blanks.
Suggested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/973506292d0c7b05c06530c8e11803ce38e5eda2.1644949750.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 15 Feb 2022 18:31:24 +0000 (19:31 +0100)]
powerpc/ftrace: Have arch_ftrace_get_regs() return NULL unless FL_SAVE_REGS is set
When FL_SAVE_REGS is not set we get here via ftrace_caller()
which doesn't save all registers.
ftrace_caller() explicitely clears regs.msr, so we can rely
on it to know where we come from. We don't expect MSR register
to be 0 at all when involving ftrace.
Fixes:
40b035efe288 ("powerpc/ftrace: Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2f9a7e898c93cc7438ef5ccd47cb9c3a9c5b53ef.1644949750.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 15 Feb 2022 18:31:23 +0000 (19:31 +0100)]
powerpc/ftrace: Add recursion protection in prepare_ftrace_return()
The function_graph_enter() does not provide any recursion protection.
Add a protection in prepare_ftrace_return() in case
function_graph_enter() calls something that gets
function graph traced.
Fixes:
830213786c49 ("powerpc/ftrace: directly call of function graph tracer by ftrace caller")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/74edf2ff0a60e66b0d9225a137100a86a0557032.1644949750.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 15 Feb 2022 18:31:22 +0000 (19:31 +0100)]
powerpc/ftrace: Also save r1 in ftrace_caller()
Also save r1 in ftrace_caller()
r1 is needed during unwinding when the function_graph tracer
is active.
Fixes:
830213786c49 ("powerpc/ftrace: directly call of function graph tracer by ftrace caller")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ff535e86d3a69376a6d89168511d4e403835f18b.1644949750.git.christophe.leroy@csgroup.eu
Paul Menzel [Mon, 14 Feb 2022 06:55:43 +0000 (07:55 +0100)]
powerpc/boot: Add `otheros-too-big.bld` to .gitignore
Currently, `git status` lists the file as untracked by git, so tell git
to ignore it.
Fixes:
aa3bc365ee73 ("powerpc/ps3: Add check for otheros image size")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220214065543.198992-1-pmenzel@molgen.mpg.de
Christophe Leroy [Sun, 13 Feb 2022 09:02:41 +0000 (10:02 +0100)]
powerpc: Don't allow the use of EMIT_BUG_ENTRY with BUGFLAG_WARNING
Warnings in assembly must use EMIT_WARN_ENTRY in order to generate
the necessary entry in exception table.
Check in EMIT_BUG_ENTRY that flags don't include BUGFLAG_WARNING.
This change avoids problems like the one fixed by
commit
fd1eaaaaa686 ("powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug
warnings").
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ddcb422102a37eb45f57694c7ef0ec6187964dff.1644742951.git.christophe.leroy@csgroup.eu
Michael Ellerman [Fri, 11 Feb 2022 06:32:37 +0000 (17:32 +1100)]
powerpc: Fix STACKTRACE=n build
Our skiroot_defconfig doesn't enable FTRACE, and so doesn't get
STACKTRACE enabled either. That leads to a build failure since commit
1614b2b11fab ("arch: Make ARCH_STACKWALK independent of STACKTRACE")
made stacktrace.c build even when STACKTRACE=n.
arch/powerpc/kernel/stacktrace.c: In function ‘handle_backtrace_ipi’:
arch/powerpc/kernel/stacktrace.c:171:2: error: implicit declaration of function ‘nmi_cpu_backtrace’
171 | nmi_cpu_backtrace(regs);
| ^~~~~~~~~~~~~~~~~
arch/powerpc/kernel/stacktrace.c: In function ‘arch_trigger_cpumask_backtrace’:
arch/powerpc/kernel/stacktrace.c:226:2: error: implicit declaration of function ‘nmi_trigger_cpumask_backtrace’
226 | nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace_ipi);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This happens because our headers haven't defined
arch_trigger_cpumask_backtrace, which causes lib/nmi_backtrace.c not to
build nmi_cpu_backtrace().
The code in question doesn't actually depend on STACKTRACE=y, that was
just added because arch_trigger_cpumask_backtrace() lived in
stacktrace.c for convenience. So drop the dependency on
CONFIG_STACKTRACE, that causes lib/nmi_backtrace.c to build
nmi_cpu_backtrace() etc. and fixes the build.
Fixes:
1614b2b11fab ("arch: Make ARCH_STACKWALK independent of STACKTRACE")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220212111349.2806972-1-mpe@ellerman.id.au
Aneesh Kumar K.V [Fri, 11 Feb 2022 06:52:15 +0000 (12:22 +0530)]
powerpc/mm: Update default hugetlb size early
commit:
d9c234005227 ("Do not depend on MAX_ORDER when grouping pages by mobility")
introduced pageblock_order which will be used to group pages better.
The kernel now groups pages based on the value of HPAGE_SHIFT. Hence HPAGE_SHIFT
should be set before we call set_pageblock_order.
set_pageblock_order happens early in the boot and default hugetlb page size
should be initialized before that to compute the right pageblock_order value.
Currently, default hugetlbe page size is set via arch_initcalls which happens
late in the boot as shown via the below callstack:
[
c000000007383b10] [
c000000001289328] hugetlbpage_init+0x2b8/0x2f8
[
c000000007383bc0] [
c0000000012749e4] do_one_initcall+0x14c/0x320
[
c000000007383c90] [
c00000000127505c] kernel_init_freeable+0x410/0x4e8
[
c000000007383da0] [
c000000000012664] kernel_init+0x30/0x15c
[
c000000007383e10] [
c00000000000cf14] ret_from_kernel_thread+0x5c/0x64
and the pageblock_order initialization is done early during the boot.
[
c0000000018bfc80] [
c0000000012ae120] set_pageblock_order+0x50/0x64
[
c0000000018bfca0] [
c0000000012b3d94] sparse_init+0x188/0x268
[
c0000000018bfd60] [
c000000001288bfc] initmem_init+0x28c/0x328
[
c0000000018bfe50] [
c00000000127b370] setup_arch+0x410/0x480
[
c0000000018bfed0] [
c00000000127401c] start_kernel+0xb8/0x934
[
c0000000018bff90] [
c00000000000d984] start_here_common+0x1c/0x98
delaying default hugetlb page size initialization implies the kernel will
initialize pageblock_order to (MAX_ORDER - 1) which is not an optimal
value for mobility grouping. IIUC we always had this issue. But it was not
a problem for hash translation mode because (MAX_ORDER - 1) is the same as
HUGETLB_PAGE_ORDER (8) in the case of hash (16MB). With radix,
HUGETLB_PAGE_ORDER will be 5 (2M size) and hence pageblock_order should be
5 instead of 8.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220211065215.101767-1-aneesh.kumar@linux.ibm.com
Ritesh Harjani [Mon, 13 Sep 2021 06:17:20 +0000 (11:47 +0530)]
selftests/powerpc/copyloops: Add memmove_64 test
While debugging an issue, we wanted to check whether the arch specific
kernel memmove implementation is correct.
This selftest could help test that.
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Suggested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/57242c1fe7aba6b7f0fcd0490303bfd5f222ee00.1631512686.git.riteshh@linux.ibm.com
Nathan Lynch [Mon, 7 Feb 2022 22:12:47 +0000 (16:12 -0600)]
powerpc/pseries: make pseries_devicetree_update() static
pseries_devicetree_update() has only one call site, in the same file in
which it is defined. Make it static.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220207221247.354454-1-nathanl@linux.ibm.com
Christophe Leroy [Fri, 21 Jan 2022 16:30:34 +0000 (16:30 +0000)]
powerpc/vdso: Move cvdso_call macro into gettimeofday.S
Now that gettimeofday.S is unique, move cvdso_call macro
into that file which is the only user.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/72720359d4c58e3a3b96dd74952741225faac3de.1642782130.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 21 Jan 2022 16:30:30 +0000 (16:30 +0000)]
powerpc/vdso: Remove cvdso_call_time macro
cvdso_call_time macro is very similar to cvdso_call macro.
Add a call_time argument to cvdso_call which is 0 by default
and set to 1 when using cvdso_call to call __c_kernel_time().
Return returned value as is with CR[SO] cleared when it is used
for time().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/837a260ad86fc1ce297a562c2117fd69be5f7b5c.1642782130.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 21 Jan 2022 16:30:27 +0000 (16:30 +0000)]
powerpc/vdso: Merge vdso64 and vdso32 into a single directory
merge vdso64 into vdso32 and rename it vdso.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4dbe05cc130f6a0858d09ac72e436c373cb08b70.1642782130.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 21 Jan 2022 16:30:23 +0000 (16:30 +0000)]
powerpc/vdso: Rework VDSO32 makefile to add a prefix to object files
In order to merge vdso32 and vdso64 build in following patch, rework
Makefile is order to add -32 suffix to VDSO32 object files.
Also change sigtramp.S to sigtramp32.S as VDSO64 sigtramp.S is too
different to be squashed into VDSO32 sigtramp.S at the first place.
gen_vdso_offsets.sh also becomes gen_vdso32_offsets.sh
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0c421b704a57b228e75a891512568339c53667ad.1642782130.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 21 Jan 2022 16:30:21 +0000 (16:30 +0000)]
powerpc/vdso: augment VDSO32 functions to support 64 bits build
VDSO64 cacheflush.S datapage.S gettimeofday.S and vgettimeofday.c
are very similar to their VDSO32 counterpart.
VDSO32 counterpart is already more complete than the VDSO64 version
as it supports both PPC32 vdso and 32 bits VDSO for PPC64.
Use compat macros wherever necessary in PPC32 files
so that they can also be used to build VDSO64.
vdso64/note.S is already a link to vdso32/note.S so
no change is required.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c2cbb8f046b7efc251053521dc39b752795e26b7.1642782130.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 21 Jan 2022 08:06:38 +0000 (08:06 +0000)]
powerpc/lib/sstep: use truncate_if_32bit()
Use truncate_if_32bit() when possible instead of open coding.
truncate_if_32bit() returns an unsigned long, so don't use it when
a signed value is expected.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7e1c07123f13156d4a27991a2e2694fb584bc068.1642752375.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 21 Jan 2022 08:06:32 +0000 (08:06 +0000)]
powerpc/lib/sstep: Remove unneeded #ifdef __powerpc64__
MSR_64BIT is always defined, no need to hide code using MSR_64BIT
inside an #ifdef __powerpc64__
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ee61b693bc7e046eed1abb7a34909eb4878a9442.1642752375.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 21 Jan 2022 08:06:27 +0000 (08:06 +0000)]
powerpc/lib/sstep: Use l1_dcache_bytes() instead of opencoding
Don't opencode dcache size retrieval based on whether that's ppc32 or ppc64.
Use l1_dcache_bytes()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6c608fd4795e2d8ea1a0a449405a0087f76d8bb3.1642752375.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 21 Jan 2022 07:58:47 +0000 (07:58 +0000)]
powerpc: Use the newly added is_tsk_32bit_task() macro
Two places deserve using the macro is_tsk_32bit_task() added by
commit
252745240ba0 ("powerpc/audit: Fix syscall_get_arch()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7304a889dbe885aefad8a8333673c81ee4b8f7a6.1642751874.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 17 Jan 2022 10:06:39 +0000 (10:06 +0000)]
powerpc/32s: Enable STRICT_MODULE_RWX for the 603 core
The book3s/32 MMU doesn't support per page execution protection and
doesn't support RO protection for kernel pages.
However, on the 603 which implements software loaded TLBs, execution
protection is honored by the TLB Miss handler which doesn't load
Instruction TLB for non executable pages. And RO protection is
honored by clearing the C bit for RO pages, leading to DSI.
So on the 603, STRICT_MODULE_RWX is possible without much effort.
Don't disable STRICT_MODULE_RWX on book3s/32 and print a warning
in case STRICT_MODULE_RWX has been selected and the platform has
a Hardware HASH MMU.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1e6162f334167e75f1140082932e3a354b16daba.1642413973.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 10 Jan 2022 12:29:42 +0000 (12:29 +0000)]
powerpc/bpf: Always reallocate BPF_REG_5, BPF_REG_AX and TMP_REG when possible
BPF_REG_5, BPF_REG_AX and TMP_REG are mapped on non volatile registers
because there are not enough volatile registers, but they don't need
to be preserved on function calls.
So when some volatile registers become available, those registers can
always be reallocated regardless of whether SEEN_FUNC is set or not.
Suggested-by: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b04c246874b716911139c04bc004b3b14eed07ef.1641817763.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 24 Dec 2021 11:07:40 +0000 (11:07 +0000)]
powerpc: Add set_memory_{p/np}() and remove set_memory_attr()
set_memory_attr() was implemented by commit
4d1755b6a762 ("powerpc/mm:
implement set_memory_attr()") because the set_memory_xx() couldn't
be used at that time to modify memory "on the fly" as explained it
the commit.
But set_memory_attr() uses set_pte_at() which leads to warnings when
CONFIG_DEBUG_VM is selected, because set_pte_at() is unexpected for
updating existing page table entries.
The check could be bypassed by using __set_pte_at() instead,
as it was the case before commit
c988cfd38e48 ("powerpc/32:
use set_memory_attr()") but since commit
9f7853d7609d ("powerpc/mm:
Fix set_memory_*() against concurrent accesses") it is now possible
to use set_memory_xx() functions to update page table entries
"on the fly" because the update is now atomic.
For DEBUG_PAGEALLOC we need to clear and set back _PAGE_PRESENT.
Add set_memory_np() and set_memory_p() for that.
Replace all uses of set_memory_attr() by the relevant set_memory_xx()
and remove set_memory_attr().
Fixes:
c988cfd38e48 ("powerpc/32: use set_memory_attr()")
Cc: stable@vger.kernel.org
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Depends-on:
9f7853d7609d ("powerpc/mm: Fix set_memory_*() against concurrent accesses")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cda2b44b55c96f9ac69fa92e68c01084ec9495c5.1640344012.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 24 Dec 2021 11:07:33 +0000 (11:07 +0000)]
powerpc/set_memory: Avoid spinlock recursion in change_page_attr()
Commit
1f9ad21c3b38 ("powerpc/mm: Implement set_memory() routines")
included a spin_lock() to change_page_attr() in order to
safely perform the three step operations. But then
commit
9f7853d7609d ("powerpc/mm: Fix set_memory_*() against
concurrent accesses") modify it to use pte_update() and do
the operation safely against concurrent access.
In the meantime, Maxime reported some spinlock recursion.
[ 15.351649] BUG: spinlock recursion on CPU#0, kworker/0:2/217
[ 15.357540] lock: init_mm+0x3c/0x420, .magic:
dead4ead, .owner: kworker/0:2/217, .owner_cpu: 0
[ 15.366563] CPU: 0 PID: 217 Comm: kworker/0:2 Not tainted 5.15.0+ #523
[ 15.373350] Workqueue: events do_free_init
[ 15.377615] Call Trace:
[ 15.380232] [
e4105ac0] [
800946a4] do_raw_spin_lock+0xf8/0x120 (unreliable)
[ 15.387340] [
e4105ae0] [
8001f4ec] change_page_attr+0x40/0x1d4
[ 15.393413] [
e4105b10] [
801424e0] __apply_to_page_range+0x164/0x310
[ 15.400009] [
e4105b60] [
80169620] free_pcp_prepare+0x1e4/0x4a0
[ 15.406045] [
e4105ba0] [
8016c5a0] free_unref_page+0x40/0x2b8
[ 15.411979] [
e4105be0] [
8018724c] kasan_depopulate_vmalloc_pte+0x6c/0x94
[ 15.418989] [
e4105c00] [
801424e0] __apply_to_page_range+0x164/0x310
[ 15.425451] [
e4105c50] [
80187834] kasan_release_vmalloc+0xbc/0x134
[ 15.431898] [
e4105c70] [
8015f7a8] __purge_vmap_area_lazy+0x4e4/0xdd8
[ 15.438560] [
e4105d30] [
80160d10] _vm_unmap_aliases.part.0+0x17c/0x24c
[ 15.445283] [
e4105d60] [
801642d0] __vunmap+0x2f0/0x5c8
[ 15.450684] [
e4105db0] [
800e32d0] do_free_init+0x68/0x94
[ 15.456181] [
e4105dd0] [
8005d094] process_one_work+0x4bc/0x7b8
[ 15.462283] [
e4105e90] [
8005d614] worker_thread+0x284/0x6e8
[ 15.468227] [
e4105f00] [
8006aaec] kthread+0x1f0/0x210
[ 15.473489] [
e4105f40] [
80017148] ret_from_kernel_thread+0x14/0x1c
Remove the read / modify / write sequence to make the operation atomic
and remove the spin_lock() in change_page_attr().
To do the operation atomically, we can't use pte modification helpers
anymore. Because all platforms have different combination of bits, it
is not easy to use those bits directly. But all have the
_PAGE_KERNEL_{RO/ROX/RW/RWX} set of flags. All we need it to compare
two sets to know which bits are set or cleared.
For instance, by comparing _PAGE_KERNEL_ROX and _PAGE_KERNEL_RO you
know which bit gets cleared and which bit get set when changing exec
permission.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/all/20211212112152.GA27070@sakura/
Link: https://lore.kernel.org/r/43c3c76a1175ae6dc1a3d3b5c3f7ecb48f683eea.1640344012.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:44 +0000 (16:38 +0000)]
powerpc/ftrace: Remove ftrace_32.S
Functions in ftrace_32.S are common with PPC64.
Reuse the ones defined for PPC64 with slight modification
when required.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Squash in fixup diff from Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5e837fc190504c4ef834272e70d60ae33f175d49.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:40 +0000 (16:38 +0000)]
powerpc/ftrace: Prepare ftrace_64_mprofile.S for reuse by PPC32
PPC64 mprofile versions and PPC32 are very similar.
Modify PPC64 version so that if can be reused for PPC32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/82a732915dc71ee766e31809350939331944006d.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:35 +0000 (16:38 +0000)]
powerpc/ftrace: directly call of function graph tracer by ftrace caller
Modify function graph tracer to be handled directly by the standard
ftrace caller.
This is made possible as powerpc now supports
CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
This change simplifies the call of function graph ftrace.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/04d196585ff81bde06a000bd9c633a33a5b21130.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:31 +0000 (16:38 +0000)]
powerpc/ftrace: Refactor ftrace_{en/dis}able_ftrace_graph_caller
ftrace_enable_ftrace_graph_caller() and
ftrace_disable_ftrace_graph_caller() have common code.
They will have even more common code after following patch.
Refactor into a single ftrace_modify_ftrace_graph_caller() function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f37785a531f1a8f201e1b3da45997a5c77e9d820.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:28 +0000 (16:38 +0000)]
powerpc/ftrace: Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS
Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS. It accelerates the call
of livepatching.
Also note that powerpc being the last one to convert to
CONFIG_DYNAMIC_FTRACE_WITH_ARGS, it will now be possible to remove
klp_arch_set_pc() on all architectures.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5831f711a778fcd6eb51eb5898f1faae4378b35b.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:25 +0000 (16:38 +0000)]
powerpc/ftrace: Prepare PPC64's ftrace_caller() for CONFIG_DYNAMIC_FTRACE_WITH_ARGS
In order to implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS, change ftrace_caller()
to handle LIVEPATCH the same way as frace_caller_regs().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/850817333cc76593699032e8e9a70d8c36e1af1e.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:22 +0000 (16:38 +0000)]
powerpc/ftrace: Prepare PPC32's ftrace_caller() for CONFIG_DYNAMIC_FTRACE_WITH_ARGS
In order to implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS, change
ftrace_caller() stack layout to match struct pt_regs.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da9734eba504998fb914aca12131c9f6bf6120a8.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:19 +0000 (16:38 +0000)]
powerpc/ftrace: Simplify PPC32's return_to_handler()
return_to_handler() was copied from PPC64. For PPC32 it
just needs to save r3 and r4, and doesn't require any nop
after the bl.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aab39b77b34fb2c4ed08ed01c547b6ed13643788.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:16 +0000 (16:38 +0000)]
powerpc/ftrace: Don't save again LR in ftrace_regs_caller() on PPC32
PPC32 mcount() caller already saves LR on stack,
no need to save it again.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eadcfc770b4f1e35535ffb85e28e858a2c31dec4.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:12 +0000 (16:38 +0000)]
powerpc/ftrace: Add support for livepatch to PPC32
PPC64 needs some special logic to properly set up the TOC.
See commit
85baa095497f ("powerpc/livepatch: Add live patching support
on ppc64le") for details.
PPC32 doesn't have TOC so it doesn't need that logic, so adding
LIVEPATCH support is straight forward.
Add CONFIG_LIVEPATCH_64 and move livepatch stack logic into that item.
Livepatch sample modules all work.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/63cb094125b6a6038c65eeac2abaabbabe63addd.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:09 +0000 (16:38 +0000)]
powerpc/module_32: Fix livepatching for RO modules
Livepatching a loaded module involves applying relocations through
apply_relocate_add(), which attempts to write to read-only memory when
CONFIG_STRICT_MODULE_RWX=y.
R_PPC_ADDR16_LO, R_PPC_ADDR16_HI, R_PPC_ADDR16_HA and R_PPC_REL24 are
the types generated by the kpatch-build userspace tool or klp-convert
kernel tree observed applying a relocation to a post-init module.
Use patch_instruction() to patch those relocations.
Commit
8734b41b3efe ("powerpc/module_64: Fix livepatching for
RO modules") did similar change in module_64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5697157cb7dba3927e19aa17c915a83bc550bb2.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 20 Dec 2021 16:38:02 +0000 (16:38 +0000)]
livepatch: Fix build failure on 32 bits processors
Trying to build livepatch on powerpc/32 results in:
kernel/livepatch/core.c: In function 'klp_resolve_symbols':
kernel/livepatch/core.c:221:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
221 | sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
| ^
kernel/livepatch/core.c:221:21: error: assignment to 'Elf32_Sym *' {aka 'struct elf32_sym *'} from incompatible pointer type 'Elf64_Sym *' {aka 'struct elf64_sym *'} [-Werror=incompatible-pointer-types]
221 | sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
| ^
kernel/livepatch/core.c: In function 'klp_apply_section_relocs':
kernel/livepatch/core.c:312:35: error: passing argument 1 of 'klp_resolve_symbols' from incompatible pointer type [-Werror=incompatible-pointer-types]
312 | ret = klp_resolve_symbols(sechdrs, strtab, symndx, sec, sec_objname);
| ^~~~~~~
| |
| Elf32_Shdr * {aka struct elf32_shdr *}
kernel/livepatch/core.c:193:44: note: expected 'Elf64_Shdr *' {aka 'struct elf64_shdr *'} but argument is of type 'Elf32_Shdr *' {aka 'struct elf32_shdr *'}
193 | static int klp_resolve_symbols(Elf64_Shdr *sechdrs, const char *strtab,
| ~~~~~~~~~~~~^~~~~~~
Fix it by using the right types instead of forcing 64 bits types.
Fixes:
7c8e2bdd5f0d ("livepatch: Apply vmlinux-specific KLP relocations early")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5288e11b018a762ea3351cc8fb2d4f15093a4457.1640017960.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 30 Nov 2021 12:04:50 +0000 (13:04 +0100)]
powerpc/32: Remove _ENTRY() macro
_ENTRY() is now redundant with _GLOBAL(). Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62a35f8dde2bb74c8d0d7a5430cce07a5a3a6fb6.1638273868.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 30 Nov 2021 12:04:49 +0000 (13:04 +0100)]
powerpc/32: Remove remaining .stabs annotations
STABS debug format has been superseded long time ago by DWARF.
Remove the few remaining .stabs annotations from old 32 bits code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/68932ec2ba6b868d35006b96e90f0890f3da3c05.1638273868.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 3 Sep 2021 11:18:43 +0000 (11:18 +0000)]
powerpc/corenet: Change criteria to set MPIC_ENABLE_COREINT
Don't use ppc_md function comparison.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c8ef82ee5f2713f4c36eb5d2d49b0905c7472801.1630667612.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 3 Sep 2021 11:18:42 +0000 (11:18 +0000)]
powerpc/mpc86xx_hpcn: Remove obsolete statement
Comment says "Delete this in 2.6.27".
Do so now.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a47bb6a69c68156bc2d555152dab5a23733856b7.1630667612.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 3 Sep 2021 11:18:40 +0000 (11:18 +0000)]
powerpc/machdep: Move sys_ctrler_t definition into pmac_feature.h
sys_ctrler_t definitions are tied to pmac. Move it into pmac_feature.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Move to pmac_feature.h to fix some build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7dd5ead4bbca749e2da089ff6fe2b1878d6bf40e.1630667612.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 3 Sep 2021 11:18:38 +0000 (11:18 +0000)]
powerpc/machdep: Remove CONFIG_PPC_HAS_FEATURE_CALLS
Last user was removed by commit
7bbd827750e6 ("[PATCH] ppc64: very
basic desktop g5 sound support").
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/803779fffb4ee0801746b2173d37cea3b273f821.1630667612.git.christophe.leroy@csgroup.eu
Sourabh Jain [Fri, 4 Feb 2022 08:56:01 +0000 (14:26 +0530)]
powerpc: Set crashkernel offset to mid of RMA region
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
Christophe Leroy [Sun, 30 Jan 2022 10:29:34 +0000 (10:29 +0000)]
powerpc/32s: Make pte_update() non atomic on 603 core
On 603 core, TLB miss handler don't do any change to the
page tables so pte_update() doesn't need to be atomic.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cc89d3c11fc9c742d0df3454a657a3a00be24046.1643538554.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 31 Jan 2022 08:16:48 +0000 (08:16 +0000)]
powerpc/nohash: Remove pte_same()
arch/powerpc/include/asm/nohash/{32/64}/pgtable.h has
#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B) ((pte_val(A) ^ pte_val(B)) == 0)
include/linux/pgtable.h has
#ifndef __HAVE_ARCH_PTE_SAME
static inline int pte_same(pte_t pte_a, pte_t pte_b)
{
return pte_val(pte_a) == pte_val(pte_b);
}
#endif
Remove the powerpc version which is similar to the generic one.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/83c97bd58a3596ef1b0ff28b1e41fd492d005520.1643616989.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 31 Jan 2022 07:17:57 +0000 (07:17 +0000)]
powerpc/603: Clear C bit when PTE is read only
On book3s/32 MMU, PP bits don't offer kernel RO protection,
kernel pages are always RW.
However, on the 603 a page fault is always generated when the
C bit (change bit = dirty bit) is not set.
Enforce kernel RO protection by clearing C bit in TLB miss
handler when the page doesn't have _PAGE_RW flag.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bbb13848ff0100a76ee9ea95118058c30ae95f2c.1643613343.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 31 Jan 2022 07:15:12 +0000 (07:15 +0000)]
powerpc/603: Remove outdated comment
Since commit
84de6ab0e904 ("powerpc/603: don't handle PAGE_ACCESSED
in TLB miss handlers.") page table is not updated anymore by
TLB miss handlers.
Remove the comment.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/38b1ffefd2146fa56bf8aa605d476ad9736bbb37.1643613296.git.christophe.leroy@csgroup.eu
Chen Jingwen [Wed, 29 Dec 2021 03:52:26 +0000 (11:52 +0800)]
powerpc/kasan: Fix early region not updated correctly
The shadow's page table is not updated when PTE_RPN_SHIFT is 24
and PAGE_SHIFT is 12. It not only causes false positives but
also false negative as shown the following text.
Fix it by bringing the logic of kasan_early_shadow_page_entry here.
1. False Positive:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50
Write of size 16 at addr
f57f3be0 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-12267-gdebe436e77c7 #1
Call Trace:
[
c80d1c20] [
c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable)
[
c80d1c40] [
c02ff668] print_address_description.constprop.0+0x88/0x300
[
c80d1c70] [
c02ff45c] kasan_report+0x1ec/0x200
[
c80d1cb0] [
c0300b20] kasan_check_range+0x160/0x2f0
[
c80d1cc0] [
c03018a4] memset+0x34/0x90
[
c80d1ce0] [
c0280108] pcpu_alloc+0x508/0xa50
[
c80d1d40] [
c02fd7bc] __kmem_cache_create+0xfc/0x570
[
c80d1d70] [
c0283d64] kmem_cache_create_usercopy+0x274/0x3e0
[
c80d1db0] [
c2036580] init_sd+0xc4/0x1d0
[
c80d1de0] [
c00044a0] do_one_initcall+0xc0/0x33c
[
c80d1eb0] [
c2001624] kernel_init_freeable+0x2c8/0x384
[
c80d1ef0] [
c0004b14] kernel_init+0x24/0x170
[
c80d1f10] [
c001b26c] ret_from_kernel_thread+0x5c/0x64
Memory state around the buggy address:
f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>
f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
2. False Negative (with KASAN tests):
==================================================================
Before fix:
ok 45 - kmalloc_double_kzfree
# vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039
KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
not ok 46 - vmalloc_oob
not ok 1 - kasan
==================================================================
After fix:
ok 1 - kasan
Fixes:
cbd18991e24fe ("powerpc/mm: Fix an Oops in kasan_mmu_init()")
Cc: stable@vger.kernel.org # 5.4.x
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211229035226.59159-1-chenjingwen6@huawei.com
Christophe JAILLET [Tue, 1 Feb 2022 12:31:16 +0000 (13:31 +0100)]
powerpc/xive: Add some error handling code to 'xive_spapr_init()'
'xive_irq_bitmap_add()' can return -ENOMEM.
In this case, we should free the memory already allocated and return
'false' to the caller.
Also add an error path which undoes the 'tima = ioremap(...)'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/564998101804886b151235c8a9f93020923bfd2c.1643718324.git.christophe.jaillet@wanadoo.fr
Athira Rajeev [Wed, 2 Feb 2022 04:18:37 +0000 (09:48 +0530)]
powerpc/perf: Don't use perf_hw_context for trace IMC PMU
Trace IMC (In-Memory collection counters) in powerpc is useful for
application level profiling.
For trace_imc, presently task context (task_ctx_nr) is set to
perf_hw_context. But perf_hw_context should only be used for CPU PMU.
See commit
26657848502b ("perf/core: Verify we have a single
perf_hw_context PMU").
So for trace_imc, even though it is per thread PMU, it is preferred to
use sw_context in order to be able to do application level monitoring.
Hence change the task_ctx_nr to use perf_sw_context.
Fixes:
012ae244845f ("powerpc/perf: Trace imc PMU functions")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Update subject & incorporate notes into change log, reflow comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202041837.65968-1-atrajeev@linux.vnet.ibm.com
Wedson Almeida Filho [Wed, 2 Feb 2022 05:51:23 +0000 (05:51 +0000)]
powerpc/module_64: use module_init_section instead of patching names
Without this patch, module init sections are disabled by patching their
names in arch-specific code when they're loaded (which prevents code in
layout_sections from finding init sections). This patch uses the new
arch-specific module_init_section instead.
This allows modules that have .init_array sections to have the
initialisers properly called (on load, before init). Without this patch,
the initialisers are not called because .init_array is renamed to
_init_array, and thus isn't found by code in find_module_sections().
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202055123.2144842-1-wedsonaf@google.com
Mamatha Inamdar [Thu, 24 Sep 2020 05:14:16 +0000 (10:44 +0530)]
PCI: rpaphp: Add MODULE_DESCRIPTION
This patch adds a brief MODULE_DESCRIPTION to rpadlpar_io kernel modules
(descriptions taken from Kconfig file).
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200924051343.16052.9571.stgit@localhost.localdomain
Julia Lawall [Fri, 8 May 2020 09:12:56 +0000 (09:12 +0000)]
powerpc/spufs: adjust list element pointer type
Other uses of &gang->aff_list_head, eg in spufs_assert_affinity, indicate
that the list elements have type spu_context, not spu as used here. Change
the type of tmp accordingly.
This has no impact on the execution, because tmp is not used in the body of
the loop.
Fixes:
c5fc8d2a92461 ("[CELL] cell: add placement computation for scheduling of affinity contexts")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1588929176-28527-1-git-send-email-Julia.Lawall@inria.fr
Bhaskar Chowdhury [Sat, 20 Mar 2021 21:39:32 +0000 (03:09 +0530)]
powerpc/epapr: Fix parmeters typo
s/parmeters/parameters/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210320213932.22697-1-unixbhaskar@gmail.com
Fabiano Rosas [Wed, 20 Jan 2021 18:18:47 +0000 (15:18 -0300)]
powerpc: Fix debug print in smp_setup_cpu_maps
When figuring out the number of threads, the debug message prints "1
thread" for the first iteration of the loop, instead of the actual
number of threads calculated from the length of the
"ibm,ppc-interrupt-server#s" property.
* /cpus/PowerPC,POWER8@20...
ibm,ppc-interrupt-server#s -> 1 threads <--- WRONG
thread 0 -> cpu 0 (hard id 32)
thread 1 -> cpu 1 (hard id 33)
thread 2 -> cpu 2 (hard id 34)
thread 3 -> cpu 3 (hard id 35)
thread 4 -> cpu 4 (hard id 36)
thread 5 -> cpu 5 (hard id 37)
thread 6 -> cpu 6 (hard id 38)
thread 7 -> cpu 7 (hard id 39)
* /cpus/PowerPC,POWER8@28...
ibm,ppc-interrupt-server#s -> 8 threads
thread 0 -> cpu 8 (hard id 40)
thread 1 -> cpu 9 (hard id 41)
thread 2 -> cpu 10 (hard id 42)
thread 3 -> cpu 11 (hard id 43)
thread 4 -> cpu 12 (hard id 44)
thread 5 -> cpu 13 (hard id 45)
thread 6 -> cpu 14 (hard id 46)
thread 7 -> cpu 15 (hard id 47)
(...)
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210120181847.952106-1-farosas@linux.ibm.com
Michael Ellerman [Sun, 30 Jan 2022 18:39:18 +0000 (18:39 +0000)]
powerpc/ptdump: Fix sparse warning in hashpagetable.c
As reported by sparse:
arch/powerpc/mm/ptdump/hashpagetable.c:264:29: warning: restricted __be64 degrades to integer
arch/powerpc/mm/ptdump/hashpagetable.c:265:49: warning: restricted __be64 degrades to integer
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: warning: incorrect type in assignment (different base types)
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: expected unsigned long long [usertype]
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: got restricted __be64 [usertype] v
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: warning: incorrect type in assignment (different base types)
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: expected unsigned long long [usertype]
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: got restricted __be64 [usertype] r
The values returned by plpar_pte_read_4() are CPU endian, not __be64, so
assigning them to struct hash_pte confuses sparse. As a minimal fix open
code a struct to hold the values with CPU endian types.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202053039.691917-1-mpe@ellerman.id.au
Corentin Labbe [Tue, 25 Jan 2022 13:54:21 +0000 (13:54 +0000)]
macintosh: macio_asic: remove useless cast for driver.name
pci_driver name is const char pointer, so the cast it not necessary.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125135421.4081740-1-clabbe@baylibre.com
Michael Ellerman [Thu, 20 Jan 2022 01:33:20 +0000 (12:33 +1100)]
powerpc/64: Move paca allocation later in boot
Mahesh & Sourabh identified two problems[1][2] with ppc64_bolted_size()
and paca allocation.
The first is that on a Radix capable machine but with "disable_radix" on
the command line, there is a window during early boot where
early_radix_enabled() is true, even though it will later become false.
early_init_devtree: <- early_radix_enabled() = false
early_init_dt_scan_cpus: <- early_radix_enabled() = false
...
check_cpu_pa_features: <- early_radix_enabled() = false
... ^ <- early_radix_enabled() = TRUE
allocate_paca: | <- early_radix_enabled() = TRUE
... |
ppc64_bolted_size: | <- early_radix_enabled() = TRUE
if (early_radix_enabled())| <- early_radix_enabled() = TRUE
return ULONG_MAX; |
... |
... | <- early_radix_enabled() = TRUE
... | <- early_radix_enabled() = TRUE
mmu_early_init_devtree() V
... <- early_radix_enabled() = false
This causes ppc64_bolted_size() to return ULONG_MAX for the boot CPU's
paca allocation, even though later it will return a different value.
This is not currently a bug because the paca allocation is also limited
by the RMA size, but that is very fragile.
The second issue is that when using the Hash MMU, when we call
ppc64_bolted_size() for the boot CPU's paca allocation, we have not yet
detected whether 1T segments are available. That causes
ppc64_bolted_size() to return 256MB, even if the machine can actually
support up to 1T. This is usually OK, we generally have space below
256MB for one paca, but for a kdump kernel placed above 256MB it causes
the boot to fail.
At boot we cannot discover all the features of the machine
instantaneously, so there will always be some periods where we have
incomplete knowledge of the system. However both the above problems stem
from the fact that we allocate the boot CPU's paca (and paca pointers
array) before we decide which MMU we are using, or discover its exact
features.
Moving the paca allocation slightly later still can solve both the
issues described above, and means for a normal boot we don't do any
permanent allocations until after we've discovered the MMU.
Note that although we move the boot CPU's paca allocation later, we
still have a temporary paca (boot_paca) accessible via r13, so code that
does read only access to paca fields is safe. The only risk is that some
code writes to the boot_paca, and that write will then be lost when we
switch away from the boot_paca later in early_setup().
The additional code that runs before the paca allocation is primarily
mmu_early_init_devtree(), which is scanning the device tree and
populating globals and cur_cpu_spec with MMU related flags. I do not see
any additional code that writes to paca fields.
[1]: https://lore.kernel.org/r/
20211018084434.217772-2-sourabhjain@linux.ibm.com
[2]: https://lore.kernel.org/r/
20211018084434.217772-3-sourabhjain@linux.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124130544.408675-1-mpe@ellerman.id.au
Maxim Kiselev [Fri, 21 Jan 2022 09:14:47 +0000 (12:14 +0300)]
powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch
On board rev A, the network interface labels for the switch ports
written on the front panel are different than on rev B and later.
This patch fixes network interface names for the switch ports according
to labels that are written on the front panel of the board rev B.
They start from ETH3 and end at ETH10.
This patch also introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.
Fixes:
e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121091447.3412907-1-bigunclemax@gmail.com
Laurent Dufour [Thu, 6 Jan 2022 16:13:39 +0000 (17:13 +0100)]
powerpc/pseries: read the lpar name from the firmware
The LPAR name may be changed after the LPAR has been started in the HMC.
In that case lparstat command is not reporting the updated value because
it reads it from the device tree which is read at boot time.
However this value could be read from RTAS.
Adding this value in the /proc/powerpc/lparcfg output allows to read the
updated value.
However the hypervisor, like Qemu/KVM, may not support this RTAS
parameter. In that case the value reported in lparcfg is read from the
device tree and so is not updated accordingly.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop doc-comment syntax, change RTAS/DT to lower case, use of_root
to fix missing of_node_put(), use of_property_read_string()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220106161339.74656-1-ldufour@linux.ibm.com
Thierry Reding [Mon, 20 Dec 2021 13:40:36 +0000 (14:40 +0100)]
powerpc: dts: Fix some I2C unit addresses
The unit-address for the Maxim MAX1237 ADCs on XPedite5200 boards don't
match the value in the "reg" property and cause a DTC warning.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211220134036.683309-1-thierry.reding@gmail.com
Maxim Kiselev [Thu, 30 Dec 2021 15:11:21 +0000 (18:11 +0300)]
powerpc: dts: t104xrdb: fix phy type for FMAN 4/5
T1040RDB has two RTL8211E-VB phys which requires setting
of internal delays for correct work.
Changing the phy-connection-type property to `rgmii-id`
will fix this issue.
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com
Tobias Waldekranz [Wed, 12 Jan 2022 11:24:59 +0000 (12:24 +0100)]
powerpc/e500/qemu-e500: allow core to idle without waiting
This means an idle guest won't needlessly consume an entire core on
the host, waiting for work to show up.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220112112459.1033754-1-troglobit@gmail.com
Michal Suchanek [Wed, 27 Nov 2019 22:09:59 +0000 (23:09 +0100)]
powerpc: add link stack flush mitigation status in debugfs.
The link stack flush status is not visible in debugfs. It can be enabled
even when count cache flush is disabled. Add separate file for its
status.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
[mpe: Update for change to link_stack_flush_type]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191127220959.6208-1-msuchanek@suse.de
Sachin Sant [Thu, 6 Jan 2022 11:03:53 +0000 (16:33 +0530)]
powerpc/xive: Export XIVE IPI information for online-only processors.
Cédric pointed out that XIVE IPI information exported via sysfs
(debug/powerpc/xive) display empty lines for processors which are
not online.
Switch to using for_each_online_cpu() so that information is
displayed for online-only processors.
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/164146703333.19039.10920919226094771665.sendpatchset@MacBook-Pro.local
Linus Torvalds [Sun, 30 Jan 2022 13:37:07 +0000 (15:37 +0200)]
Linux 5.17-rc2
Linus Torvalds [Sun, 30 Jan 2022 13:12:02 +0000 (15:12 +0200)]
Merge tag 'irq_urgent_for_v5.17_rc2_p2' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Drop an unused private data field in the AIC driver
- Various fixes to the realtek-rtl driver
- Make the GICv3 ITS driver compile again in !SMP configurations
- Force reset of the GICv3 ITSs at probe time to avoid issues during kexec
- Yet another kfree/bitmap_free conversion
- Various DT updates (Renesas, SiFive)
* tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples
dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts
dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support
irqchip/gic-v3-its: Reset each ITS's BASERn register before probe
irqchip/gic-v3-its: Fix build for !SMP
irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap
irqchip/realtek-rtl: Service all pending interrupts
irqchip/realtek-rtl: Fix off-by-one in routing
irqchip/realtek-rtl: Map control data to virq
irqchip/apple-aic: Drop unused ipi_hwirq field
Linus Torvalds [Sun, 30 Jan 2022 13:02:32 +0000 (15:02 +0200)]
Merge tag 'perf_urgent_for_v5.17_rc2_p2' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Prevent accesses to the per-CPU cgroup context list from another CPU
except the one it belongs to, to avoid list corruption
- Make sure parent events are always woken up to avoid indefinite hangs
in the traced workload
* tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix cgroup event list management
perf: Always wake the parent event
Linus Torvalds [Sun, 30 Jan 2022 11:09:00 +0000 (13:09 +0200)]
Merge tag 'sched_urgent_for_v5.17_rc2_p2' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
"Make sure the membarrier-rseq fence commands are part of the reported
set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY"
* tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask
Linus Torvalds [Sun, 30 Jan 2022 10:55:06 +0000 (12:55 +0200)]
Merge tag 'x86_urgent_for_v5.17_rc2' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add another Intel CPU model to the list of CPUs supporting the
processor inventory unique number
- Allow writing to MCE thresholding sysfs files again - a previous
change had accidentally disabled it and no one noticed. Goes to show
how much is this stuff used
* tag 'x86_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPIN
x86/MCE/AMD: Allow thresholding interface updates after init
Linus Torvalds [Sun, 30 Jan 2022 09:21:50 +0000 (11:21 +0200)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"12 patches.
Subsystems affected by this patch series: sysctl, binfmt, ia64, mm
(memory-failure, folios, kasan, and psi), selftests, and ocfs2"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
ocfs2: fix a deadlock when commit trans
jbd2: export jbd2_journal_[grab|put]_journal_head
psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n
psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n
mm, kasan: use compare-exchange operation to set KASAN page tag
kasan: test: fix compatibility with FORTIFY_SOURCE
tools/testing/scatterlist: add missing defines
mm: page->mapping folio->mapping should have the same offset
memory-failure: fetch compound_head after pgmap_pfn_valid()
ia64: make IA64_MCA_RECOVERY bool instead of tristate
binfmt_misc: fix crash when load/unload module
include/linux/sysctl.h: fix register_sysctl_mount_point() return type
Joseph Qi [Sat, 29 Jan 2022 21:41:27 +0000 (13:41 -0800)]
ocfs2: fix a deadlock when commit trans
commit
6f1b228529ae introduces a regression which can deadlock as
follows:
Task1: Task2:
jbd2_journal_commit_transaction ocfs2_test_bg_bit_allocatable
spin_lock(&jh->b_state_lock) jbd_lock_bh_journal_head
__jbd2_journal_remove_checkpoint spin_lock(&jh->b_state_lock)
jbd2_journal_put_journal_head
jbd_lock_bh_journal_head
Task1 and Task2 lock bh->b_state and jh->b_state_lock in different
order, which finally result in a deadlock.
So use jbd2_journal_[grab|put]_journal_head instead in
ocfs2_test_bg_bit_allocatable() to fix it.
Link: https://lkml.kernel.org/r/20220121071205.100648-3-joseph.qi@linux.alibaba.com
Fixes:
6f1b228529ae ("ocfs2: fix race between searching chunks and release journal_head from buffer_head")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Tested-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Sat, 29 Jan 2022 21:41:23 +0000 (13:41 -0800)]
jbd2: export jbd2_journal_[grab|put]_journal_head
Patch series "ocfs2: fix a deadlock case".
This fixes a deadlock case in ocfs2. We firstly export jbd2 symbols
jbd2_journal_[grab|put]_journal_head as preparation and later use them
in ocfs2 insread of jbd_[lock|unlock]_bh_journal_head to fix the
deadlock.
This patch (of 2):
This exports symbols jbd2_journal_[grab|put]_journal_head, which will be
used outside modules, e.g. ocfs2.
Link: https://lkml.kernel.org/r/20220121071205.100648-2-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Cc: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suren Baghdasaryan [Sat, 29 Jan 2022 21:41:20 +0000 (13:41 -0800)]
psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n
When CONFIG_PROC_FS is disabled psi code generates the following
warnings:
kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=]
1364 | static const struct proc_ops psi_cpu_proc_ops = {
| ^~~~~~~~~~~~~~~~
kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=]
1355 | static const struct proc_ops psi_memory_proc_ops = {
| ^~~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=]
1346 | static const struct proc_ops psi_io_proc_ops = {
| ^~~~~~~~~~~~~~~
Make definitions of these structures and related functions conditional
on CONFIG_PROC_FS config.
Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com
Fixes:
0e94682b73bf ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suren Baghdasaryan [Sat, 29 Jan 2022 21:41:17 +0000 (13:41 -0800)]
psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n
When CONFIG_CGROUPS is disabled psi code generates the following
warnings:
kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes]
1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group,
| ^~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes]
1182 | void psi_trigger_destroy(struct psi_trigger *t)
| ^~~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes]
1249 | __poll_t psi_trigger_poll(void **trigger_ptr,
| ^~~~~~~~~~~~~~~~
Change the declarations of these functions in the header to provide the
prototypes even when they are unused.
Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com
Fixes:
0e94682b73bf ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Collingbourne [Sat, 29 Jan 2022 21:41:14 +0000 (13:41 -0800)]
mm, kasan: use compare-exchange operation to set KASAN page tag
It has been reported that the tag setting operation on newly-allocated
pages can cause the page flags to be corrupted when performed
concurrently with other flag updates as a result of the use of
non-atomic operations.
Fix the problem by using a compare-exchange loop to update the tag.
Link: https://lkml.kernel.org/r/20220120020148.1632253-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/I456b24a2b9067d93968d43b4bb3351c0cec63101
Fixes:
2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marco Elver [Sat, 29 Jan 2022 21:41:11 +0000 (13:41 -0800)]
kasan: test: fix compatibility with FORTIFY_SOURCE
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform
dynamic checks using __builtin_object_size(ptr), which when failed will
panic the kernel.
Because the KASAN test deliberately performs out-of-bounds operations,
the kernel panics with FORTIFY_SOURCE, for example:
| kernel BUG at lib/string_helpers.c:910!
| invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
| CPU: 1 PID: 137 Comm: kunit_try_catch Tainted: G B 5.16.0-rc3+ #3
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
| RIP: 0010:fortify_panic+0x19/0x1b
| ...
| Call Trace:
| kmalloc_oob_in_memset.cold+0x16/0x16
| ...
Fix it by also hiding `ptr` from the optimizer, which will ensure that
__builtin_object_size() does not return a valid size, preventing
fortified string functions from panicking.
Link: https://lkml.kernel.org/r/20220124160744.1244685-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Nico Pache <npache@redhat.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maor Gottlieb [Sat, 29 Jan 2022 21:41:07 +0000 (13:41 -0800)]
tools/testing/scatterlist: add missing defines
The cited commits replaced preemptible with pagefault_disabled and
flush_kernel_dcache_page with flush_dcache_page respectively, hence need
to update the corresponding defines in the test.
scatterlist.c: In function ‘sg_miter_stop’:
scatterlist.c:919:4: warning: implicit declaration of function ‘flush_dcache_page’ [-Wimplicit-function-declaration]
flush_dcache_page(miter->page);
^~~~~~~~~~~~~~~~~
In file included from linux/scatterlist.h:8:0,
from scatterlist.c:9:
scatterlist.c:922:18: warning: implicit declaration of function ‘pagefault_disabled’ [-Wimplicit-function-declaration]
WARN_ON_ONCE(!pagefault_disabled());
^
linux/mm.h:23:25: note: in definition of macro ‘WARN_ON_ONCE’
int __ret_warn_on = !!(condition); \
^~~~~~~~~
Link: https://lkml.kernel.org/r/20220118082105.1737320-1-maorg@nvidia.com
Fixes:
723aca208516 ("mm/scatterlist: replace the !preemptible warning in sg_miter_stop()")
Fixes:
0e84f5dbf8d6 ("scatterlist: replace flush_kernel_dcache_page with flush_dcache_page")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>