btrfs: free the allocated memory if btrfs_alloc_page_array() fails

commit 94dbf7c0871f7ae6349ba4b0341ce8f5f98a071d upstream.

[BUG]
If btrfs_alloc_page_array() fail to allocate all pages but part of the
slots, then the partially allocated pages would be leaked in function
btrfs_submit_compressed_read().

[CAUSE]
As explicitly stated, if btrfs_alloc_page_array() returned -ENOMEM,
caller is responsible to free the partially allocated pages.

For the existing call sites, most of them are fine:

- btrfs_raid_bio::stripe_pages
  Handled by free_raid_bio().

- extent_buffer::pages[]
  Handled btrfs_release_extent_buffer_pages().

- scrub_stripe::pages[]
  Handled by release_scrub_stripe().

But there is one exception in btrfs_submit_compressed_read(), if
btrfs_alloc_page_array() failed, we didn't cleanup the array and freed
the array pointer directly.

Initially there is still the error handling in commit dd137dd1f2d7
("btrfs: factor out allocating an array of pages"), but later in commit
544fe4a903ce ("btrfs: embed a btrfs_bio into struct compressed_bio"),
the error handling is removed, leading to the possible memory leak.

[FIX]
This patch would add back the error handling first, then to prevent such
situation from happening again, also
Make btrfs_alloc_page_array() to free the allocated pages as a extra
safety net, then we don't need to add the error handling to
btrfs_submit_compressed_read().

Fixes: 544fe4a903ce ("btrfs: embed a btrfs_bio into struct compressed_bio")
CC: stable@vger.kernel.org # 6.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: make error messages more clear when getting a chunk map

commit 7d410d5efe04e42a6cd959bfe6d59d559fdf8b25 upstream.

When getting a chunk map, at btrfs_get_chunk_map(), we do some sanity
checks to verify we found a chunk map and that map found covers the
logical address the caller passed in. However the messages aren't very
clear in the sense that don't mention the issue is with a chunk map and
one of them prints the 'length' argument as if it were the end offset of
the requested range (while the in the string format we use %llu-%llu
which suggests a range, and the second %llu-%llu is actually a range for
the chunk map). So improve these two details in the error messages.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: send: ensure send_fd is writable

commit 0ac1d13a55eb37d398b63e6ff6db4a09a2c9128c upstream.

kernel_write() requires the caller to ensure that the file is writable.
Let's do that directly after looking up the ->send_fd.

We don't need a separate bailout path because the "out" path already
does fput() if ->send_filp is non-NULL.

This has no security impact for two reasons:

 - the ioctl requires CAP_SYS_ADMIN
 - __kernel_write() bails out on read-only files - but only since 5.8,
   see commit a01ac27be472 ("fs: check FMODE_WRITE in __kernel_write")

Reported-and-tested-by: syzbot+12e098239d20385264d3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=12e098239d20385264d3
Fixes: 31db9f7c23fb ("Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix off-by-one when checking chunk map includes logical address

commit 5fba5a571858ce2d787fdaf55814e42725bfa895 upstream.

At btrfs_get_chunk_map() we get the extent map for the chunk that contains
the given logical address stored in the 'logical' argument. Then we do
sanity checks to verify the extent map contains the logical address. One
of these checks verifies if the extent map covers a range with an end
offset behind the target logical address - however this check has an
off-by-one error since it will consider an extent map whose start offset
plus its length matches the target logical address as inclusive, while
the fact is that the last byte it covers is behind the target logical
address (by 1).

So fix this condition by using '<=' rather than '<' when comparing the
extent map's "start + length" against the target logical address.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: ref-verify: fix memory leaks in btrfs_ref_tree_mod()

commit f91192cd68591c6b037da345bc9fcd5e50540358 upstream.

In btrfs_ref_tree_mod(), when !parent 're' was allocated through
kmalloc(). In the following code, if an error occurs, the execution will
be redirected to 'out' or 'out_unlock' and the function will be exited.
However, on some of the paths, 're' are not deallocated and may lead to
memory leaks.

For example: lookup_block_entry() for 'be' returns NULL, the out label
will be invoked. During that flow ref and 'ra' are freed but not 're',
which can potentially lead to a memory leak.

CC: stable@vger.kernel.org # 5.10+
Reported-and-tested-by: syzbot+d66de4cbf532749df35f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d66de4cbf532749df35f
Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: add dmesg output for first mount and last unmount of a filesystem

commit 2db313205f8b96eea467691917138d646bb50aef upstream.

There is a feature request to add dmesg output when unmounting a btrfs.
There are several alternative methods to do the same thing, but with
their own problems:

- Use eBPF to watch btrfs_put_super()/open_ctree()
  Not end user friendly, they have to dip their head into the source
  code.

- Watch for directory /sys/fs/<uuid>/
  This is way more simple, but still requires some simple device -> uuid
  lookups.  And a script needs to use inotify to watch /sys/fs/.

Compared to all these, directly outputting the information into dmesg
would be the most simple one, with both device and UUID included.

And since we're here, also add the output when mounting a filesystem for
the first time for parity. A more fine grained monitoring of subvolume
mounts should be done by another layer, like audit.

Now mounting a btrfs with all default mkfs options would look like this:

  [81.906566] BTRFS info (device dm-8): first mount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2
  [81.907494] BTRFS info (device dm-8): using crc32c (crc32c-intel) checksum algorithm
  [81.908258] BTRFS info (device dm-8): using free space tree
  [81.912644] BTRFS info (device dm-8): auto enabling async discard
  [81.913277] BTRFS info (device dm-8): checking UUID tree
  [91.668256] BTRFS info (device dm-8): last unmount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2

CC: stable@vger.kernel.org # 5.4+
Link: https://github.com/kdave/btrfs-progs/issues/689
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Mark altinstructions read-only and 32-bit aligned

commit 33f806da2df68606f77d7b892cd1298ba3d463e8 upstream.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Ensure 32-bit alignment on parisc unwind section

commit c9fcb2b65c2849e8ff3be23fd8828312fb68dc19 upstream.

Make sure the .PARISC.unwind section will be 32-bit aligned.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Mark jump_table naturally aligned

commit 07eecff8ae78df7f28800484d31337e1f9bfca3a upstream.

The jump_table stores two 32-bit words and one 32- (on 32-bit kernel)
or one 64-bit word (on 64-bit kernel).
Ensure that the last word is always 64-bit aligned on a 64-bit kernel
by aligning the whole structure on sizeof(long).

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes

commit e5f3e299a2b1e9c3ece24a38adfc089aef307e8a upstream.

Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.

They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.

There is no need to keep them, so simply remove them.

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Mark lock_aligned variables 16-byte aligned on SMP

commit b28fc0d8739c03e7b6c44914a9d00d4c6dddc0ea upstream.

On parisc we need 16-byte alignment for variables which are used for
locking. Mark the __lock_aligned attribute acordingly so that the
.data..lock_aligned section will get that alignment in the generated
object files.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Use natural CPU alignment for bug_table

commit fe76a1349f235969381832c83d703bc911021eb6 upstream.

Make sure that the __bug_table section gets 32- or 64-bit aligned,
depending if a 32- or 64-bit kernel is being built.
Mark it non-writeable and use .blockz instead of the .org assembler
directive to pad the struct.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Mark ex_table entries 32-bit aligned in uaccess.h

commit a80aeb86542a50aa8521729ea4cc731ee7174f03 upstream.

Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Mark ex_table entries 32-bit aligned in assembly.h

commit e11d4cccd094a7cd4696c8c42e672c76c092dad5 upstream.

Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Don't clobber f0/vs0 during fp|altivec register save

commit 5e1d824f9a283cbf90f25241b66d1f69adb3835b upstream.

During floating point and vector save to thread data f0/vs0 are
clobbered by the FPSCR/VSCR store routine. This has been obvserved to
lead to userspace register corruption and application data corruption
with io-uring.

Fix it by restoring f0/vs0 after FPSCR/VSCR store has completed for
all the FP, altivec, VMX register save paths.

Tested under QEMU in kvm mode, running on a Talos II workstation with
dual POWER9 DD2.2 CPUs.

Additional detail (mpe):

Typically save_fpu() is called from __giveup_fpu() which saves the FP
regs and also *turns off FP* in the tasks MSR, meaning the kernel will
reload the FP regs from the thread struct before letting the task use FP
again. So in that case save_fpu() is free to clobber f0 because the FP
regs no longer hold live values for the task.

There is another case though, which is the path via:
  sys_clone()
    ...
    copy_process()
      dup_task_struct()
        arch_dup_task_struct()
          flush_all_to_thread()
            save_all()

That path saves the FP regs but leaves them live. That's meant as an
optimisation for a process that's using FP/VSX and then calls fork(),
leaving the regs live means the parent process doesn't have to take a
fault after the fork to get its FP regs back. The optimisation was added
in commit 8792468da5e1 ("powerpc: Add the ability to save FPU without
giving it up").

That path does clobber f0, but f0 is volatile across function calls,
and typically programs reach copy_process() from userspace via a syscall
wrapper function. So in normal usage f0 being clobbered across a
syscall doesn't cause visible data corruption.

But there is now a new path, because io-uring can call copy_process()
via create_io_thread() from the signal handling path. That's OK if the
signal is handled as part of syscall return, but it's not OK if the
signal is handled due to some other interrupt.

That path is:

interrupt_return_srr_user()
  interrupt_exit_user_prepare()
    interrupt_exit_user_prepare_main()
      do_notify_resume()
        get_signal()
          task_work_run()
            create_worker_cb()
              create_io_worker()
                copy_process()
                  dup_task_struct()
                    arch_dup_task_struct()
                      flush_all_to_thread()
                        save_all()
                          if (tsk->thread.regs->msr & MSR_FP)
                            save_fpu()
                            # f0 is clobbered and potentially live in userspace

Note the above discussion applies equally to save_altivec().

Fixes: 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up")
Cc: stable@vger.kernel.org # v4.6+
Closes: https://lore.kernel.org/all/480932026.45576726.1699374859845.JavaMail.zimbra@raptorengineeringinc.com/
Closes: https://lore.kernel.org/linuxppc-dev/480221078.47953493.1700206777956.JavaMail.zimbra@raptorengineeringinc.com/
Tested-by: Timothy Pearson <tpearson@raptorengineering.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[mpe: Reword change log to describe exact path of corruption & other minor tweaks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1921539696.48534988.1700407082933.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers

commit dc158d23b33df9033bcc8e7117e8591dd2f9d125 upstream.

Before running a guest, the host process (e.g., QEMU) FP/VEC registers
are saved if they were being used, similarly to when the kernel uses FP
registers. The guest values are then loaded into regs, and the host
process registers will be restored lazily when it uses FP/VEC.

KVM HV has a bug here: the host process registers do get saved, but the
user MSR bits remain enabled, which indicates the registers are valid
for the process. After they are clobbered by running the guest, this
valid indication causes the host process to take on the FP/VEC register
values of the guest.

Fixes: 34e119c96b2b ("KVM: PPC: Book3S HV P9: Reduce mtmsrd instructions required to save host SPRs")
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231122025811.2973-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Add MTL to quirk list to skip TE disabling

commit 85b80fdffa867d75dfb9084a839e7949e29064e8 upstream.

The VT-d spec requires (10.4.4 Global Command Register, TE field) that:

Hardware implementations supporting DMA draining must drain any in-flight
DMA read/write requests queued within the Root-Complex before switching
address translation on or off and reflecting the status of the command
through the TES field in the Global Status register.

Unfortunately, some integrated graphic devices fail to do so after some
kind of power state transition. As the result, the system might stuck in
iommu_disable_translation(), waiting for the completion of TE transition.

Add MTL to the quirk list for those devices and skips TE disabling if the
qurik hits.

Fixes: b1012ca8dc4f ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu")
Cc: stable@vger.kernel.org
Signed-off-by: Abdul Halim, Mohd Syazwan <mohd.syazwan.abdul.halim@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20231116022324.30120-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext2: Fix ki_pos update for DIO buffered-io fallback case

commit 8abc712ea4867a81c860853048f24e511bbc20f2 upstream.

Commit "filemap: update ki_pos in generic_perform_write", made updating
of ki_pos into common code in generic_perform_write() function.
This also causes generic/091 to fail.
This happened due to an in-flight collision with:
fb5de4358e1a ("ext2: Move direct-io to use iomap"). I have chosen fixes tag
based on which commit got landed later to upstream kernel.

Fixes: 182c25e9c157 ("filemap: update ki_pos in generic_perform_write")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <d595bee9f2475ed0e8a2e7fb94f7afc2c6ffc36a.1700643443.git.ritesh.list@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: revert replacing IS_ERR_OR_NULL with IS_ERR

commit bb6cc253861bd5a7cf8439e2118659696df9619f upstream.

Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in
node allocations") replaced IS_ERR_OR_NULL by IS_ERR. This leads to a
NULL pointer dereference.

BUG: kernel NULL pointer dereference, address: 0000000000000080
Call Trace:
 ? __die_body.cold+0x1a/0x1f
 ? page_fault_oops+0xd2/0x2b0
 ? exc_page_fault+0x70/0x170
 ? asm_exc_page_fault+0x22/0x30
 ? btree_node_free+0xf/0x160 [bcache]
 ? up_write+0x32/0x60
 btree_gc_coalesce+0x2aa/0x890 [bcache]
 ? bch_extent_bad+0x70/0x170 [bcache]
 btree_gc_recurse+0x130/0x390 [bcache]
 ? btree_gc_mark_node+0x72/0x230 [bcache]
 bch_btree_gc+0x5da/0x600 [bcache]
 ? cpuusage_read+0x10/0x10
 ? bch_btree_gc+0x600/0x600 [bcache]
 bch_gc_thread+0x135/0x180 [bcache]

The relevant code starts with:

    new_nodes[0] = NULL;

    for (i = 0; i < nodes; i++) {
        if (__bch_keylist_realloc(&keylist, bkey_u64s(&r[i].b->key)))
            goto out_nocoalesce;
    // ...
out_nocoalesce:
    // ...
    for (i = 0; i < nodes; i++)
        if (!IS_ERR(new_nodes[i])) {  // IS_ERR_OR_NULL before
028ddcac477b
            btree_node_free(new_nodes[i]);  // new_nodes[0] is NULL
            rw_unlock(true, new_nodes[i]);
        }

This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this.

Fixes: 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations")
Link: https://lore.kernel.org/all/3DF4A87A-2AC1-4893-AE5F-E921478419A9@suse.de/
Cc: stable@vger.kernel.org
Cc: Zheng Wang <zyytlz.wz@163.com>
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Markus Weippert <markus@gekmihesg.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu: Avoid more races around device probe

commit a2e7e59a94269484a83386972ca07c22fd188854 upstream.

It turns out there are more subtle races beyond just the main part of
__iommu_probe_device() itself running in parallel - the dev_iommu_free()
on the way out of an unsuccessful probe can still manage to trip up
concurrent accesses to a device's fwspec. Thus, extend the scope of
iommu_probe_device_lock() to also serialise fwspec creation and initial
retrieval.

Reported-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/
Fixes: 01657bc14a39 ("iommu: Avoid races around device probe")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Tested-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: don't guard IORING_OFF_PBUF_RING with SETUP_NO_MMAP

commit 6f007b1406637d3d73d42e41d7e8d9b245185e69 upstream.

This flag only applies to the SQ and CQ rings, it's perfectly valid
to use a mmap approach for the provided ring buffers. Move the
check into where it belongs.

Cc: stable@vger.kernel.org
Fixes: 03d89a2de25b ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: fix check in dma_resv_add_fence

commit 95ba893c9f4feb836ddce627efd0bb6af6667031 upstream.

It's valid to add the same fence multiple times to a dma-resv object and
we shouldn't need one extra slot for each.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: a3f7c10a269d5 ("dma-buf/dma-resv: check if the new fence is really later")
Cc: stable@vger.kernel.org # v5.19+
Link: https://patchwork.freedesktop.org/patch/msgid/20231115093035.1889-1-christian.koenig@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq/amd-pstate: Fix the return value of amd_pstate_fast_switch()

commit bb87be267b8ee9b40917fb5bf51be5ddb33c37c2 upstream.

cpufreq_driver->fast_switch() callback expects a frequency as a return
value. amd_pstate_fast_switch() was returning the return value of
amd_pstate_update_freq(), which only indicates a success or failure.

Fix this by making amd_pstate_fast_switch() return the target_freq
when the call to amd_pstate_update_freq() is successful, and return
the current frequency from policy->cur when the call to
amd_pstate_update_freq() is unsuccessful.

Fixes: 4badf2eb1e98 ("cpufreq: amd-pstate: Add ->fast_switch() callback")
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Cc: 6.4+ <stable@vger.kernel.org> # v6.4+
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powercap: DTPM: Fix unneeded conversions to micro-Watts

commit b817f1488fca548fe50e2654d84a1956a16a1a8a upstream.

The power values coming from the Energy Model are already in uW.

The PowerCap and DTPM frameworks operate on uW, so all places should
just use the values from the EM.

Fix the code by removing all of the conversion to uW still present in it.

Fixes: ae6ccaa65038 (PM: EM: convert power field to micro-Watts precision and align drivers)
Cc: 5.19+ <stable@vger.kernel.org> # v5.19+
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nouveau: find the smallest page allocation to cover a buffer alloc.

commit e9ba37d9f9a6872b069dd893bd86a7d77ba8c153 upstream.

With the new uapi we don't have the comp flags on the allocation,
so we shouldn't be using the first size that works, we should be
iterating until we get the correct one.

This reduces allocations from 2MB to 64k in lots of places.

Fixes dEQP-VK.memory.allocation.basic.size_8KiB.forward.count_4000
on my ampere/gsp system.

Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811031520.248341-1-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: free io_buffer_list entries via RCU

commit 5cf4f52e6d8aa2d3b7728f568abbf9d42a3af252 upstream.

mmap_lock nests under uring_lock out of necessity, as we may be doing
user copies with uring_lock held. However, for mmap of provided buffer
rings, we attempt to grab uring_lock with mmap_lock already held from
do_mmap(). This makes lockdep, rightfully, complain:

WARNING: possible circular locking dependency detected
6.7.0-rc1-00009-gff3337ebaf94-dirty #4438 Not tainted
------------------------------------------------------
buf-ring.t/442 is trying to acquire lock:
ffff00020e1480a8 (&ctx->uring_lock){+.+.}-{3:3}, at: io_uring_validate_mmap_request.isra.0+0x4c/0x140

but task is already holding lock:
ffff0000dc226190 (&mm->mmap_lock){++++}-{3:3}, at: vm_mmap_pgoff+0x124/0x264

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&mm->mmap_lock){++++}-{3:3}:
       __might_fault+0x90/0xbc
       io_register_pbuf_ring+0x94/0x488
       __arm64_sys_io_uring_register+0x8dc/0x1318
       invoke_syscall+0x5c/0x17c
       el0_svc_common.constprop.0+0x108/0x130
       do_el0_svc+0x2c/0x38
       el0_svc+0x4c/0x94
       el0t_64_sync_handler+0x118/0x124
       el0t_64_sync+0x168/0x16c

-> #0 (&ctx->uring_lock){+.+.}-{3:3}:
       __lock_acquire+0x19a0/0x2d14
       lock_acquire+0x2e0/0x44c
       __mutex_lock+0x118/0x564
       mutex_lock_nested+0x20/0x28
       io_uring_validate_mmap_request.isra.0+0x4c/0x140
       io_uring_mmu_get_unmapped_area+0x3c/0x98
       get_unmapped_area+0xa4/0x158
       do_mmap+0xec/0x5b4
       vm_mmap_pgoff+0x158/0x264
       ksys_mmap_pgoff+0x1d4/0x254
       __arm64_sys_mmap+0x80/0x9c
       invoke_syscall+0x5c/0x17c
       el0_svc_common.constprop.0+0x108/0x130
       do_el0_svc+0x2c/0x38
       el0_svc+0x4c/0x94
       el0t_64_sync_handler+0x118/0x124
       el0t_64_sync+0x168/0x16c

From that mmap(2) path, we really just need to ensure that the buffer
list doesn't go away from underneath us. For the lower indexed entries,
they never go away until the ring is freed and we can always sanely
reference those as long as the caller has a file reference. For the
higher indexed ones in our xarray, we just need to ensure that the
buffer list remains valid while we return the address of it.

Free the higher indexed io_buffer_list entries via RCU. With that we can
avoid needing ->uring_lock inside mmap(2), and simply hold the RCU read
lock around the buffer list lookup and address check.

To ensure that the arrayed lookup either returns a valid fully formulated
entry via RCU lookup, add an 'is_ready' flag that we access with store
and release memory ordering. This isn't needed for the xarray lookups,
but doesn't hurt either. Since this isn't a fast path, retain it across
both types. Similarly, for the allocated array inside the ctx, ensure
we use the proper load/acquire as setup could in theory be running in
parallel with mmap.

While in there, add a few lockdep checks for documentation purposes.

Cc: stable@vger.kernel.org
Fixes: c56e022c0a27 ("io_uring: add support for user mapped provided buffer ring")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix incorrect cache invalidation for mm notification

commit e7ad6c2a4b1aa710db94060b716f53c812cef565 upstream.

Commit 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when
invalidating TLBs") moved the secondary TLB invalidations into the TLB
invalidation functions to ensure that all secondary TLB invalidations
happen at the same time as the CPU invalidation and added a flush-all
type of secondary TLB invalidation for the batched mode, where a range
of [0, -1UL) is used to indicates that the range extends to the end of
the address space.

However, using an end address of -1UL caused an overflow in the Intel
IOMMU driver, where the end address was rounded up to the next page.
As a result, both the IOTLB and device ATC were not invalidated correctly.

Add a flush all helper function and call it when the invalidation range
is from 0 to -1UL, ensuring that the entire caches are invalidated
correctly.

Fixes: 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when invalidating TLBs")
Cc: stable@vger.kernel.org
Cc: Huang Ying <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Tested-by: Luo Yuzhang <yuzhang.luo@intel.com> # QAT
Tested-by: Tony Zhu <tony.zhu@intel.com> # DSA
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20231117090933.75267-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: don't allow discontig pages for IORING_SETUP_NO_MMAP

commit 820d070feb668aab5bc9413c285a1dda2a70e076 upstream.

io_sqes_map() is used rather than io_mem_alloc(), if the application
passes in memory for mapping rather than have the kernel allocate it and
then mmap(2) the ranges. This then calls __io_uaddr_map() to perform the
page mapping and pinning, which checks if we end up with the same pages,
if more than one page is mapped. But this check is incorrect and only
checks if the first and last pages are the same, where it really should
be checking if the mapped pages are contigous. This allows mapping a
single normal page, or a huge page range.

Down the line we can add support for remapping pages to be virtually
contigous, which is really all that io_uring cares about.

Cc: stable@vger.kernel.org
Fixes: 03d89a2de25b ("io_uring: support for user allocated memory for rings/sqes")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: video: Use acpi_video_device for cooling-dev driver data

commit 172c48caed91a978bca078042222d09baea13717 upstream.

The acpi_video code was storing the acpi_video_device as driver_data
in the acpi_device children of the acpi_video_bus acpi_device.

But the acpi_video driver only binds to the bus acpi_device.
It uses, but does not bind to, the children. Since it is not
the driver it should not be using the driver_data of the children's
acpi_device-s.

Since commit 0d16710146a1 ("ACPI: bus: Set driver_data to NULL every
time .add() fails") the childen's driver_data ends up getting set
to NULL after a driver fails to bind to the children leading to a NULL
pointer deref in video_get_max_state when registering the cooling-dev:

[    3.148958] BUG: kernel NULL pointer dereference, address: 0000000000000090
<snip>
[    3.149015] Hardware name: Sony Corporation VPCSB2X9R/VAIO, BIOS R2087H4 06/15/2012
[    3.149021] RIP: 0010:video_get_max_state+0x17/0x30 [video]
<snip>
[    3.149105] Call Trace:
[    3.149110]  <TASK>
[    3.149114]  ? __die+0x23/0x70
[    3.149126]  ? page_fault_oops+0x171/0x4e0
[    3.149137]  ? exc_page_fault+0x7f/0x180
[    3.149147]  ? asm_exc_page_fault+0x26/0x30
[    3.149158]  ? video_get_max_state+0x17/0x30 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[    3.149176]  ? __pfx_video_get_max_state+0x10/0x10 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[    3.149192]  __thermal_cooling_device_register.part.0+0xf2/0x2f0
[    3.149205]  acpi_video_bus_register_backlight.part.0.isra.0+0x414/0x570 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[    3.149227]  acpi_video_register_backlight+0x57/0x80 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[    3.149245]  intel_acpi_video_register+0x68/0x90 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[    3.149669]  intel_display_driver_register+0x28/0x50 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[    3.150064]  i915_driver_probe+0x790/0xb90 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[    3.150402]  local_pci_probe+0x45/0xa0
[    3.150412]  pci_device_probe+0xc1/0x260
<snip>

Fix this by directly using the acpi_video_device as devdata for
the cooling-device, which avoids the need to set driver-data on
the children at all.

Fixes: 0d16710146a1 ("ACPI: bus: Set driver_data to NULL every time .add() fails")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9718
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: fix deadlock on RTL8125 in jumbo mtu mode

commit 59d395ed606d8df14615712b0cdcdadb2d962175 upstream.

The original change results in a deadlock if jumbo mtu mode is used.
Reason is that the phydev lock is held when rtl_reset_work() is called
here, and rtl_jumbo_config() calls phy_start_aneg() which also tries
to acquire the phydev lock. Fix this by calling rtl_reset_work()
asynchronously.

Fixes: 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125")
Reported-by: Ian Chen <free122448@hotmail.com>
Tested-by: Ian Chen <free122448@hotmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/caf6a487-ef8c-4570-88f9-f47a659faf33@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme: check for valid nvme_identify_ns() before using it

commit d8b90d600aff181936457f032d116dbd8534db06 upstream.

When scanning namespaces, it is possible to get valid data from the first
call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second
call in nvme_update_ns_info_block().  In particular, if the NSID becomes
inactive between the two commands, a storage device may return a buffer
filled with zero as per 4.1.5.1.  In this case, we can get a kernel crash
due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will
be set to zero.

PID: 326      TASK: ffff95fec3cd8000  CPU: 29   COMMAND: "kworker/u98:10"
 #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7
 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa
 #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788
 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb
 #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce
 #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595
 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6
 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926
    [exception RIP: blk_stack_limits+434]
    RIP: ffffffff92191872  RSP: ffffad8f8702fc80  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff95efa0c91800  RCX: 0000000000000001
    RDX: 0000000000000000  RSI: 0000000000000001  RDI: 0000000000000001
    RBP: 00000000ffffffff   R8: ffff95fec7df35a8   R9: 0000000000000000
    R10: 0000000000000000  R11: 0000000000000001  R12: 0000000000000000
    R13: 0000000000000000  R14: 0000000000000000  R15: ffff95fed33c09a8
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core]
 #9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core]

This happened when the check for valid data was moved out of nvme_identify_ns()
into one of the callers.  Fix this by checking in both callers.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186
Fixes: 0dd6fff2aad4 ("nvme: bring back auto-removal of deleted namespaces during sequential scan")
Cc: stable@vger.kernel.org
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm verity: don't perform FEC for failed readahead IO

commit 0193e3966ceeeef69e235975918b287ab093082b upstream.

We found an issue under Android OTA scenario that many BIOs have to do
FEC where the data under dm-verity is 100% complete and no corruption.

Android OTA has many dm-block layers, from upper to lower:
dm-verity
dm-snapshot
dm-origin & dm-cow
dm-linear
ufs

DM tables have to change 2 times during Android OTA merging process.
When doing table change, the dm-snapshot will be suspended for a while.
During this interval, many readahead IOs are submitted to dm_verity
from filesystem. Then the kverity works are busy doing FEC process
which cost too much time to finish dm-verity IO. This causes needless
delay which feels like system is hung.

After adding debugging it was found that each readahead IO needed
around 10s to finish when this situation occurred. This is due to IO
amplification:

dm-snapshot suspend
erofs_readahead     // 300+ io is submitted
dm_submit_bio (dm_verity)
dm_submit_bio (dm_snapshot)
bio return EIO
bio got nothing, it's empty
verity_end_io
verity_verify_io
forloop range(0, io->n_blocks)    // each io->nblocks ~= 20
verity_fec_decode
fec_decode_rsb
fec_read_bufs
forloop range(0, v->fec->rsn) // v->fec->rsn = 253
new_read
submit_bio (dm_snapshot)
end loop
end loop
dm-snapshot resume

Readahead BIOs get nothing while dm-snapshot is suspended, so all of
them will cause verity's FEC.
Each readahead BIO needs to verify ~20 (io->nblocks) blocks.
Each block needs to do FEC, and every block needs to do 253
(v->fec->rsn) reads.
So during the suspend interval(~200ms), 300 readahead BIOs trigger
~1518000 (300*20*253) IOs to dm-snapshot.

As readahead IO is not required by userspace, and to fix this issue,
it is best to pass readahead errors to upper layer to handle it.

Cc: stable@vger.kernel.org
Fixes: a739ff3f543a ("dm verity: add support for forward error correction")
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm verity: initialize fec io before freeing it

commit 7be05bdfb4efc1396f7692562c7161e2b9f595f1 upstream.

If BIO error, verity_end_io() can call verity_finish_io() before
verity_fec_init_io(). Therefore, fec_io->rs is not initialized and
may crash when doing memory freeing in verity_fec_finish_io().

Crash call stack:
 die+0x90/0x2b8
 __do_kernel_fault+0x260/0x298
 do_bad_area+0x2c/0xdc
 do_translation_fault+0x3c/0x54
 do_mem_abort+0x54/0x118
 el1_abort+0x38/0x5c
 el1h_64_sync_handler+0x50/0x90
 el1h_64_sync+0x64/0x6c
 free_rs+0x18/0xac
 fec_rs_free+0x10/0x24
 mempool_free+0x58/0x148
 verity_fec_finish_io+0x4c/0xb0
 verity_end_io+0xb8/0x150

Cc: stable@vger.kernel.org # v6.0+
Fixes: 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature")
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: force toggle rate wa for first link training for a retimer

commit eb28018943fed7639dfea1c9ec9c756ec692b99a upstream.

[WHY]
Handover from DMUB to driver does not perform link rate toggle.
It might cause link training failure for boot up.

[HOW]
Force toggle rate wa for first link train.
link->vendor_specific_lttpr_link_rate_wa should be zero then.

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: fix ABM disablement

commit b9f46f0b98784e40288ee393f863f553fde062fa upstream.

On recent versions of DMUB firmware, if we want to completely disable
ABM we have to pass ABM_LEVEL_IMMEDIATE_DISABLE as the requested ABM
level to DMUB. Otherwise, LCD eDP displays are unable to reach their
maximum brightness levels. So, to fix this whenever the user requests an
ABM level of 0 pass ABM_LEVEL_IMMEDIATE_DISABLE to DMUB instead. Also,
to keep the user's experience consistent map ABM_LEVEL_IMMEDIATE_DISABLE
to 0 when a user tries to read the requested ABM level.

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Update min Z8 residency time to 2100 for DCN314

commit 4636a211980052ca0df90265c8a3ed2d46099091 upstream.

[Why]
Some panels with residency period of 2054 exhibit flickering with
Z8 at the end of the frame.

[How]
As a workaround, increase the limit to block these panels.

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Use DRAM speed from validation for dummy p-state

commit 9be601135ba8ac69880c01606c82140f2dde105e upstream.

[Description]
When choosing which dummy p-state latency to use, we
need to use the DRAM speed from validation. The DRAMSpeed
DML variable can change because we use different input
params to DML when populating watermarks set B.

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Remove min_dst_y_next_start check for Z8

commit 08448812acb2ab701cd5ff7e1a1dc97f7f10260c upstream.

[Why]
Flickering occurs on DRR supported panels when engaged in DRR due to
min_dst_y_next becoming larger than the frame size itself.

[How]
In general, we should be able to enter Z8 when this is engaged but it
might be a net power loss even if the calculation wasn't bugged.

Don't support enabling Z8 during the DRR region.

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Include udelay when waiting for INBOX0 ACK

commit 3c9ea68cb61bd7e5bd312c06a12adada74ff5805 upstream.

When waiting for the ACK for INBOX0 message,
we have to ensure to include the udelay
for proper wait time

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Update EEPROM I2C address for smu v13_0_0

commit e0409021e34af50e7b6f31635c8d21583d7c43dd upstream.

Check smu v13_0_0 SKU type to select EEPROM I2C address.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix memory overflow in the IB test

commit 6b0b7789a7a5f3e69185449f891beea58e563f9b upstream.

Fix a memory overflow issue in the gfx IB test
for some ASICs. At least 20 bytes are needed for
the IB test packet.

v2: correct code indentation errors. (Christian)

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Force order between a read and write to the same address

commit 4b27a33c3b173bef1d19ba89e0b9b812b4fddd25 upstream.

Setting register to force ordering to prevent read/write or write/read
hazards for un-cached modes.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: correct the amdgpu runtime dereference usage count

commit c6df7f313794c3ad41a49b9a7c95da369db607f3 upstream.

Fix the amdgpu runpm dereference usage count.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd: Enable PCIe PME from D3

commit 6967741d26c87300a51b5e50d4acd104bc1a9759 upstream.

When dGPU is put into BOCO it may be in D3cold but still able send
PME on display hotplug event. For this to work it must be enabled
as wake source from D3.

When runpm is enabled use pci_wake_from_d3() to mark wakeup as
enabled by default.

Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: core: Clear cmd if abort succeeds in MCQ mode

commit 93e6c0e19d5bb12b49534a411c85e21d333731fa upstream.

In MCQ mode, if cmd is pending in device and abort succeeds, response will
not be returned by device. So we need clear the cmd, otherwise timeout will
happen and next time we use same tag we will get a WARN_ON(lrbp->cmd).

Below is error log:

  <3>[ 2277.447611][T21376] ufshcd-mtk 112b0000.ufshci: ufshcd_try_to_abort_task: cmd pending in the device. tag = 7
  <3>[ 2277.476954][T21376] ufshcd-mtk 112b0000.ufshci: Aborting tag 7 / CDB 0x2a succeeded
  <6>[ 2307.551263][T30974] ufshcd-mtk 112b0000.ufshci: ufshcd_abort: Device abort task at tag 7
  <4>[ 2307.623264][  T327] WARNING: CPU: 5 PID: 327 at source/drivers/ufs/core/ufshcd.c:3021 ufshcd_queuecommand+0x66c/0xe34

Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231115131024.15829-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sd: Fix system start for ATA devices

commit b09d7f8fd50f6e93cbadd8d27fde178f745b42a1 upstream.

It is not always possible to keep a device in the runtime suspended state
when a system level suspend/resume cycle is executed. E.g. for ATA devices
connected to AHCI adapters, system resume resets the ATA ports, which
causes connected devices to spin up. In such case, a runtime suspended disk
will incorrectly be seen with a suspended runtime state because the device
is not resumed by sd_resume_system(). The power state seen by the user is
different than the actual device physical power state.

Fix this issue by introducing the struct scsi_device flag
force_runtime_start_on_system_start. When set, this flag causes
sd_resume_system() to request a runtime resume operation for runtime
suspended devices. This results in the user seeing the device runtime_state
as active after a system resume, thus correctly reflecting the device
physical power state.

Fixes: 9131bff6a9f1 ("scsi: core: pm: Only runtime resume if necessary")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: Change SCSI device boolean fields to single bit flags

commit 6371be7aeb986905bb60ec73d002fc02343393b4 upstream.

Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop
management") changed the single bit manage_start_stop flag into 2 boolean
fields of the SCSI device structure. Commit 24eca2dce0f8 ("scsi: sd:
Introduce manage_shutdown device flag") introduced the manage_shutdown
boolean field for the same structure. Together, these 2 commits increase
the size of struct scsi_device by 8 bytes by using booleans instead of
defining the manage_xxx fields as single bit flags, similarly to other
flags of this structure.

Avoid this unnecessary structure size increase and be consistent with the
definition of other flags by reverting the definitions of the manage_xxx
fields as single bit flags.

Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management")
Fixes: 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm-verity: align struct dm_verity_fec_io properly

commit 38bc1ab135db87577695816b190e7d6d8ec75879 upstream.

dm_verity_fec_io is placed after the end of two hash digests. If the hash
digest has unaligned length, struct dm_verity_fec_io could be unaligned.

This commit fixes the placement of struct dm_verity_fec_io, so that it's
aligned.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: a739ff3f543a ("dm verity: add support for forward error correction")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: libwx: fix memory leak on msix entry

commit 91fdb30ddfdb651509914d3ed0a0302712540fed upstream.

Since pci_free_irq_vectors() set pdev->msix_enabled as 0 in the
calling of pci_msix_shutdown(), wx->msix_entries is never freed.
Reordering the lines to fix the memory leak.

Cc: stable@vger.kernel.org
Fixes: 3f703186113f ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20231128095928.1083292-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add supported ALC257 for ChromeOS

commit cae2bdb579ecc9d4219c58a7d3fde1958118dc1d upstream.

ChromeOS want to support ALC257.
Add codec ID to some relation function.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/99a88a7dbdb045fd9d934abeb6cec15f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Headset Mic VREF to 100%

commit baaacbff64d9f34b64f294431966d035aeadb81c upstream.

This platform need to set Mic VREF to 100%.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/0916af40f08a4348a3298a9a59e6967e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Disable power-save on KONTRON SinglePC

commit a337c355719c42a6c5b67e985ad753590ed844fb upstream.

It's been reported that the runtime PM on KONTRON SinglePC (PCI SSID
1734:1232) caused a stall of playback after a bunch of invocations.
(FWIW, this looks like an timing issue, and the stall happens rather
on the controller side.)

As a workaround, disable the default power-save on this platform.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231130151321.9813-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Also check for VGA converter in eDP probe

commit f76f83a83c8fdbb62acbf8bd945f10821768145b upstream.

Unfortunately even the HPD based detection added in
commit cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe")
fails to detect that the VBT's eDP/DDI-A is a ghost on
Asus B360M-A (CFL+CNP). On that board eDP/DDI-A has its HPD
asserted despite nothing being actually connected there :(
The straps/fuses also indicate that the eDP port is present.

So if one boots with a VGA monitor connected the eDP probe will
mistake the DP->VGA converter hooked to DDI-E for an eDP panel
on DDI-A.

As a last resort check what kind of DP device we've detected,
and if it looks like a DP->VGA converter then conclude that
the eDP port should be ignored.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9636
Fixes: cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114142333.15799-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit fcd479a79120bf0cd507d85f898297a3b868dda6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: Be sure to wait while busy in CQE error recovery

commit c616696a902987352426fdaeec1b0b3240949e6b upstream.

STOP command does not guarantee to wait while busy, but subsequent command
MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so
be sure to wait by employing mmc_poll_for_busy().

Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://lore.kernel.org/r/20231103084720.6886-4-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: Do not lose cache flush during CQE error recovery

commit 174925d340aac55296318e43fd96c0e1d196e105 upstream.

During CQE error recovery, error-free data commands get requeued if there
is any data left to transfer, but non-data commands are completed even
though they have not been processed.  Requeue them instead.

Note the only non-data command is cache flush, which would have resulted in
a cache flush being lost if it was queued at the time of CQE recovery.

Fixes: 1e8e55b67030 ("mmc: block: Add CQE support")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: Retry commands in CQE error recovery

commit 8155d1fa3a747baad5caff5f8303321d68ddd48c upstream.

It is important that MMC_CMDQ_TASK_MGMT command to discard the queue is
successful because otherwise a subsequent reset might fail to flush the
cache first.  Retry it and the previous STOP command.

Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-5-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: cqhci: Fix task clearing in CQE error recovery

commit 1de1b77982e1a1df9707cb11f9b1789e6b8919d4 upstream.

If a task completion notification (TCN) is received when there is no
outstanding task, the cqhci driver issues a "spurious TCN" warning. This
was observed to happen right after CQE error recovery.

When an error interrupt is received the driver runs recovery logic.
It halts the controller, clears all pending tasks, and then re-enables
it. On some platforms, like Intel Jasper Lake, a stale task completion
event was observed, regardless of the CQHCI_CLEAR_ALL_TASKS bit being set.

This results in either:
a) Spurious TC completion event for an empty slot.
b) Corrupted data being passed up the stack, as a result of premature
   completion for a newly added task.

Rather than add a quirk for affected controllers, ensure tasks are cleared
by toggling CQHCI_ENABLE, which would happen anyway if
cqhci_clear_all_tasks() timed out. This is simpler and should be safe and
effective for all controllers.

Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Reported-by: Kornel Dulęba <korneld@chromium.org>
Tested-by: Kornel Dulęba <korneld@chromium.org>
Co-developed-by: Kornel Dulęba <korneld@chromium.org>
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-7-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: cqhci: Warn of halt or task clear failure

commit 35597bdb04ec27ef3b1cea007dc69f8ff5df75a5 upstream.

A correctly operating controller should successfully halt and clear tasks.
Failure may result in errors elsewhere, so promote messages from debug to
warnings.

Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-6-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: cqhci: Increase recovery halt timeout

commit b578d5d18e929aa7c007a98cce32657145dde219 upstream.

Failing to halt complicates the recovery. Additionally, unless the card or
controller are stuck, which is expected to be very rare, then the halt
should succeed, so it is better to wait. Set a large timeout.

Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled

commit 477865af60b2117ceaa1d558e03559108c15c78c upstream.

With cat regulator_summary, we found that vqmmc was not shutting
down after the card was pulled.

cat /sys/kernel/debug/regulator/regulator_summary
1.before fix
1)Insert SD card
 vddsdio 1    1  0 unknown  3500mV 0mA  1200mV  3750mV
    71100000.mmc-vqmmc  1                         0mA  3500mV  3600mV

2)Pull out the SD card
 vddsdio                1    1  0 unknown  3500mV 0mA  1200mV  3750mV
    71100000.mmc-vqmmc  1                         0mA  3500mV  3600mV

2.after fix
1)Insert SD cardt
 vddsdio                1    1  0 unknown  3500mV 0mA  1200mV  3750mV
    71100000.mmc-vqmmc  1                         0mA  3500mV  3600mV

2)Pull out the SD card
 vddsdio 0    1  0 unknown  3500mV 0mA  1200mV  3750mV
    71100000.mmc-vqmmc  0                         0mA  3500mV  3600mV

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231115083406.7368-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci-gli: Disable LPM during initialization

commit d9ed644f58670865cf067351deb71010bd87a52f upstream.

To address IO performance commit f9e5b33934ce
("mmc: host: Improve I/O read/write performance for GL9763E")
limited LPM negotiation to runtime suspend state.
The problem is that it only flips the switch in the runtime PM
resume/suspend logic.

Disable LPM negotiation in gl9763e_add_host.
This helps in two ways:
1. It was found that the LPM switch stays in the same position after
   warm reboot. Having it set in init helps with consistency.
2. Disabling LPM during the first runtime resume leaves us susceptible
   to the performance issue in the time window between boot and the
   first runtime suspend.

Fixes: f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E")
Cc: stable@vger.kernel.org
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Reviewed-by: Sven van Ashbrook <svenva@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20231114115516.1585361-1-korneld@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firewire: core: fix possible memory leak in create_units()

commit 891e0eab32a57fca4d36c5162628eb0bcb1f0edf upstream.

If device_register() fails, the refcount of device is not 0, the name
allocated in dev_set_name() is leaked. To fix this by calling put_device(),
so that it will be freed in callback function kobject_cleanup().

unreferenced object 0xffff9d99035c7a90 (size 8):
  comm "systemd-udevd", pid 168, jiffies 4294672386 (age 152.089s)
  hex dump (first 8 bytes):
    66 77 30 2e 30 00 ff ff                          fw0.0...
  backtrace:
    [<00000000e1d62bac>] __kmem_cache_alloc_node+0x1e9/0x360
    [<00000000bbeaff31>] __kmalloc_node_track_caller+0x44/0x1a0
    [<00000000491f2fb4>] kvasprintf+0x67/0xd0
    [<000000005b960ddc>] kobject_set_name_vargs+0x1e/0x90
    [<00000000427ac591>] dev_set_name+0x4e/0x70
    [<000000003b4e447d>] create_units+0xc5/0x110

fw_unit_release() will be called in the error path, move fw_device_get()
before calling device_register() to keep balanced with fw_device_put() in
fw_unit_release().

Cc: stable@vger.kernel.org
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Fixes: a1f64819fe9f ("firewire: struct device - replace bus_id with dev_name(), dev_set_name()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: avoid reload of p state in list iteration

commit 4198a9b571065978632276264e01d71d68000ac5 upstream.

When in the list_for_each_entry iteration, reload of p->state->settings
with a local setting from old_state will turn the list iteration into an
infinite loop.

The typical symptom when the issue happens, will be a printk message like:

  "not freeing pin xx (xxx) as part of deactivating group xxx - it is
already used for some other setting".

This is a compiler-dependent problem, one instance occurred using Clang
version 10.0 on the arm64 architecture with linux version 4.19.

Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device")
Signed-off-by: Maria Yu <quic_aiquny@quicinc.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115102824.23727-1-quic_aiquny@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix possible deadlock in smb2_open

commit 864fb5d3716303a045c3ffb397f651bfd37bfb36 upstream.

[ 8743.393379] ======================================================
[ 8743.393385] WARNING: possible circular locking dependency detected
[ 8743.393391] 6.4.0-rc1+ #11 Tainted: G           OE
[ 8743.393397] ------------------------------------------------------
[ 8743.393402] kworker/0:2/12921 is trying to acquire lock:
[ 8743.393408] ffff888127a14460 (sb_writers#8){.+.+}-{0:0}, at: ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd]
[ 8743.393510]
               but task is already holding lock:
[ 8743.393515] ffff8880360d97f0 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: ksmbd_vfs_kern_path_locked+0x181/0x670 [ksmbd]
[ 8743.393618]
               which lock already depends on the new lock.

[ 8743.393623]
               the existing dependency chain (in reverse order) is:
[ 8743.393628]
               -> #1 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}:
[ 8743.393648]        down_write_nested+0x9a/0x1b0
[ 8743.393660]        filename_create+0x128/0x270
[ 8743.393670]        do_mkdirat+0xab/0x1f0
[ 8743.393680]        __x64_sys_mkdir+0x47/0x60
[ 8743.393690]        do_syscall_64+0x5d/0x90
[ 8743.393701]        entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 8743.393711]
               -> #0 (sb_writers#8){.+.+}-{0:0}:
[ 8743.393728]        __lock_acquire+0x2201/0x3b80
[ 8743.393737]        lock_acquire+0x18f/0x440
[ 8743.393746]        mnt_want_write+0x5f/0x240
[ 8743.393755]        ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd]
[ 8743.393839]        ksmbd_vfs_set_dos_attrib_xattr+0xcc/0x110 [ksmbd]
[ 8743.393924]        compat_ksmbd_vfs_set_dos_attrib_xattr+0x39/0x50 [ksmbd]
[ 8743.394010]        smb2_open+0x3432/0x3cc0 [ksmbd]
[ 8743.394099]        handle_ksmbd_work+0x2c9/0x7b0 [ksmbd]
[ 8743.394187]        process_one_work+0x65a/0xb30
[ 8743.394198]        worker_thread+0x2cf/0x700
[ 8743.394209]        kthread+0x1ad/0x1f0
[ 8743.394218]        ret_from_fork+0x29/0x50

This patch add mnt_want_write() above parent inode lock and remove
nested mnt_want_write calls in smb2_open().

Fixes: 40b268d384a2 ("ksmbd: add mnt_want_write to ksmbd vfs functions")
Cc: stable@vger.kernel.org
Reported-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb: client: report correct st_size for SMB and NFS symlinks

commit 9d63509547a940225d06d7eba1dc412befae255d upstream.

We can't rely on FILE_STANDARD_INFORMATION::EndOfFile for reparse
points as they will be always zero.  Set it to symlink target's length
as specified by POSIX.

This will make stat() family of syscalls return the correct st_size
for such files.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb: client: fix missing mode bits for SMB symlinks

commit ef22bb800d967616c7638d204bc1b425beac7f5f upstream.

When instantiating inodes for SMB symlinks, add the mode bits from
@cifs_sb->ctx->file_mode as we already do for the other special files.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved

commit 88010155f02b2c3b03c71609ba6ceeb457ece095 upstream.

Fix the cifs filesystem implementations of FALLOC_FL_INSERT_RANGE, in
smb3_insert_range(), to set i_size after extending the file on the server
and before we do the copy to open the gap (as we don't clean up the EOF
marker if the copy fails).

Fixes: 7fe6fe95b936 ("cifs: add FALLOC_FL_INSERT_RANGE support")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved

commit 83d5518b124dfd605f10a68128482c839a239f9d upstream.

Fix the cifs filesystem implementations of FALLOC_FL_ZERO_RANGE, in
smb3_zero_range(), to set i_size after extending the file on the server.

Fixes: 72c419d9b073 ("cifs: fix smb3_zero_range so it can expand the file-size when required")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

leds: class: Don't expose color sysfs entry

commit 8f2244c9af245ff72185c0473827125ee6b2d1a5 upstream.

The commit c7d80059b086 ("leds: class: Store the color index in struct
led_classdev") introduced a new sysfs entry "color" that is commonly
created for the led classdev.  Unfortunately, this conflicts with the
"color" sysfs entry of already existing drivers such as Logitech HID
or System76 ACPI drivers.  The driver probe fails due to the conflict,
hence it leads to a severe regression with the missing keyboard, for
example.

This patch reverts partially the change in the commit above for
removing the led class color sysfs entries again for addressing the
regressions.  The newly introduced led_classdev.color field is kept as
it's already used by other driver.

Fixes: c7d80059b086 ("leds: class: Store the color index in struct led_classdev")
Reported-by: Johannes Penßel <johannes.penssel@gmail.com>
Closes: https://lore.kernel.org/r/b5646db3-acff-45aa-baef-df3f660486fb@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218045
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218155
Link: https://bugzilla.suse.com/show_bug.cgi?id=1217172
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231121162359.9332-1-tiwai@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.6.4

Link: https://lore.kernel.org/r/20231130162140.298098091@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Frank Scheiner <frank.scheiner@web.de>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: dwc3: qcom: fix wakeup after probe deferral

commit 41f5a0973259db9e4e3c9963d36505f80107d1a0 upstream.

The Qualcomm glue driver is overriding the interrupt trigger types
defined by firmware when requesting the wakeup interrupts during probe.

This can lead to a failure to map the DP/DM wakeup interrupts after a
probe deferral as the firmware defined trigger types do not match the
type used for the initial mapping:

irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!
irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000!

Fix this by not overriding the firmware provided trigger types when
requesting the wakeup interrupts.

Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231120161607.7405-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: dwc3: qcom: fix software node leak on probe errors

commit 9feefbf57d92e8ee293dad67585d351c7d0b6e37 upstream.

Make sure to remove the software node also on (ACPI) probe errors to
avoid leaking the underlying resources.

Note that the software node is only used for ACPI probe so the driver
unbind tear down is updated to match probe.

Fixes: 8dc6e6dd1bee ("usb: dwc3: qcom: Constify the software node")
Cc: stable@vger.kernel.org # 5.12
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231117173650.21161-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: set the dma max_seg_size

commit 8bbae288a85abed6a1cf7d185d8b9dc2f5dcb12c upstream.

Allow devices to have dma operations beyond 4K, and avoid warnings such
as:

DMA-API: dwc3 a600000.usb: mapping sg segment longer than device claims to support [len=86016] [max=65536]

Cc: stable@vger.kernel.org
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Reported-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20231026-dwc3-v2-1-1d4fd5c3e067@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: Fix default mode initialization

commit 10d510abd096d620b9fda2dd3e0047c5efc4ad2b upstream.

The default mode, configurable by DT, shall be set before usb role switch
driver is registered. Otherwise there is a race between default mode
and mode set by usb role switch driver.

Fixes: 98ed256a4dbad ("usb: dwc3: Add support for role-switch-default-mode binding")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20231025095110.2405281-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: dwc2: write HCINT with INTMASK applied

commit 0583bc776ca5b5a3f5752869fc31cf7322df2b35 upstream.

dwc2_hc_n_intr() writes back INTMASK as read but evaluates it
with intmask applied. In stress testing this causes spurious
interrupts like this:

[Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length

Applying INTMASK prevents this. The issue exists in all versions of the
driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Ivan Ivanov <ivan.ivanov@suse.com>
Tested-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20231115144514.15248-1-oneukum@suse.com
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: Skip hard reset when in error recovery

commit a6fe37f428c19dd164c2111157d4a1029bd853aa upstream.

Hard reset queued prior to error recovery (or) received during
error recovery will make TCPM to prematurely exit error recovery
sequence. Ignore hard resets received during error recovery (or)
port reset sequence.

```
[46505.459688] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS]
[46505.459706] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS]
[46505.460433] disable vbus discharge ret:0
[46505.461226] Setting usb_comm capable false
[46505.467244] Setting voltage/current limit 0 mV 0 mA
[46505.467262] polarity 0
[46505.470695] Requesting mux state 0, usb-role 0, orientation 0
[46505.475621] cc:=0
[46505.476012] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS]
[46505.476020] Received hard reset
[46505.476024] state change PORT_RESET -> HARD_RESET_START [rev3 HARD_RESET]
```

Cc: stable@vger.kernel.org
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogeus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231101021909.2962679-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: Fix sink caps op current check

commit 187fb003c57c964ea61ac9fbfe41abf3ca9973eb upstream.

TCPM checks for sink caps operational current even when PD is disabled.
This incorrectly sets tcpm_set_charge() when PD is disabled.
Check for sink caps only when PD is enabled.

[   97.572342] Start toggling
[   97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[   99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected]
[   99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[   99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[   99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[   99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected]
[   99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS]
[   99.903584] VBUS on
[   99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS]
[   99.903600] polarity 1
[   99.910155] enable vbus discharge ret:0
[   99.910160] Requesting mux state 1, usb-role 2, orientation 2
[   99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
[   99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS]
[   99.946800] Setting voltage/current limit 5000 mV 500 mA
[   99.946803] vbus=0 charge:=1
[  100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS]
[  100.027145] Setting voltage/current limit 5000 mV 3000 mA
[  100.466830] VBUS on

Cc: stable@vger.kernel.org
Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20231101012845.2701348-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: don't claim interface 4 for ZTE MF290

commit 8771127e25d6c20d458ad27cf32f7fcfc1755e05 upstream.

Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Free the interface up, to rebind it to
qmi_wwan driver.
The proper configuration is:

Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0189 Rev= 0.00
S:  Manufacturer=ZTE, Incorporated
S:  Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: fix FM101R-GL defines

commit a1092619dd28ac0fcf23016160a2fdccd98ef935 upstream.

Modify the definition of the two Fibocom FM101R-GL PID macros, which had
their PIDs switched.

The correct PIDs are:

- VID:PID 413C:8213, FM101R-GL ESIM are laptop M.2 cards (with
  MBIM interfaces for Linux)

- VID:PID 413C:8215, FM101R-GL are laptop M.2 cards (with
  MBIM interface for Linux)

0x8213: mbim, tty
0x8215: mbim, tty

Signed-off-by: Puliang Lu <puliang.lu@fibocom.com>
Fixes: 52480e1f1a25 ("USB: serial: option: add Fibocom to DELL custom modem FM101R-GL")
Link: https://lore.kernel.org/lkml/TYZPR02MB508845BAD7936A62A105CE5D89DFA@TYZPR02MB5088.apcprd02.prod.outlook.com/
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Fibocom L7xx modules

commit e389fe8b68137344562fb6e4d53d8a89ef6212dd upstream.

Add support for Fibocom L716-EU module series.

L716-EU is a Fibocom module based on ZTE's V3E/V3T chipset.

Device creates multiple interfaces when connected to PC as follows:
 - Network Interface: ECM or RNDIS (set by FW or AT Command)
 - ttyUSB0: AT port
 - ttyUSB1: Modem port
 - ttyUSB2: AT2 port
 - ttyUSB3: Trace port for log information
 - ADB: ADB port for debugging. ("Driver=usbfs" when ADB server enabled)

Here are the outputs of lsusb and usb-devices:
$ ls /dev/ttyUSB*
/dev/ttyUSB0  /dev/ttyUSB1  /dev/ttyUSB2  /dev/ttyUSB3

usb-devices:
L716-EU (ECM mode):
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 51 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0001 Rev= 1.00
S:  Manufacturer=Fibocom,Incorporated
S:  Product=Fibocom Mobile Boardband
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=87(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

L716-EU (RNDIS mode):
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 49 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0001 Rev= 1.00
S:  Manufacturer=Fibocom,Incorporated
S:  Product=Fibocom Mobile Boardband
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
E:  Ad=87(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Victor Fragoso <victorffs@hotmail.com>
Reviewed-by: Lars Melin <larsm17@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdnsp: Fix deadlock issue during using NCM gadget

commit 58f2fcb3a845fcbbad2f3196bb37d744e0506250 upstream.

The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.

Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.

Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.

cc: stable@vger.kernel.org
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20231108093125.224963-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: config: fix iteration issue in 'usb_get_bos_descriptor()'

commit 974bba5c118f4c2baf00de0356e3e4f7928b4cbc upstream.

The BOS descriptor defines a root descriptor and is the base descriptor for
accessing a family of related descriptors.

Function 'usb_get_bos_descriptor()' encounters an iteration issue when
skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in
the same descriptor being read repeatedly.

To address this issue, a 'goto' statement is introduced to ensure that the
pointer and the amount read is updated correctly. This ensures that the
function iterates to the next descriptor instead of reading the same
descriptor repeatedly.

Cc: stable@vger.kernel.org
Fixes: 3dd550a2d365 ("USB: usbcore: Fix slab-out-of-bounds bug during device reset")
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231115121325.471454-1-niklas.neronin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: xhci-plat: fix legacy PHY double init

commit 16b7e0cccb243033de4406ffb4d892365041a1e7 upstream.

Commits 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support") and
9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support") added support
for looking up legacy PHYs from the sysdev devicetree node and
initialising them.

This broke drivers such as dwc3 which manages PHYs themself as the PHYs
would now be initialised twice, something which specifically can lead to
resources being left enabled during suspend (e.g. with the
usb_phy_generic PHY driver).

As the dwc3 driver uses driver-name matching for the xhci platform
device, fix this by only looking up and initialising PHYs for devices
that have been matched using OF.

Note that checking that the platform device has a devicetree node would
currently be sufficient, but that could lead to subtle breakages in case
anyone ever tries to reuse an ancestor's node.

Fixes: 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support")
Fixes: 9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support")
Cc: stable@vger.kernel.org # 4.1
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Tested-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20231103164323.14294-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: fixup lock c->root error

commit e34820f984512b433ee1fc291417e60c47d56727 upstream.

We had a problem with io hung because it was waiting for c->root to
release the lock.

crash> cache_set.root -l cache_set.list ffffa03fde4c0050
  root = 0xffff802ef454c800
crash> btree -o 0xffff802ef454c800 | grep rw_semaphore
  [ffff802ef454c858] struct rw_semaphore lock;
crash> struct rw_semaphore ffff802ef454c858
struct rw_semaphore {
  count = {
    counter = -4294967297
  },
  wait_list = {
    next = 0xffff00006786fc28,
    prev = 0xffff00005d0efac8
  },
  wait_lock = {
    raw_lock = {
      {
        val = {
          counter = 0
        },
        {
          locked = 0 '\000',
          pending = 0 '\000'
        },
        {
          locked_pending = 0,
          tail = 0
        }
      }
    }
  },
  osq = {
    tail = {
      counter = 0
    }
  },
  owner = 0xffffa03fdc586603
}

The "counter = -4294967297" means that lock count is -1 and a write lock
is being attempted. Then, we found that there is a btree with a counter
of 1 in btree_cache_freeable.

crash> cache_set -l cache_set.list ffffa03fde4c0050 -o|grep btree_cache
  [ffffa03fde4c1140] struct list_head btree_cache;
  [ffffa03fde4c1150] struct list_head btree_cache_freeable;
  [ffffa03fde4c1160] struct list_head btree_cache_freed;
  [ffffa03fde4c1170] unsigned int btree_cache_used;
  [ffffa03fde4c1178] wait_queue_head_t btree_cache_wait;
  [ffffa03fde4c1190] struct task_struct *btree_cache_alloc_lock;
crash> list -H ffffa03fde4c1140|wc -l
973
crash> list -H ffffa03fde4c1150|wc -l
1123
crash> cache_set.btree_cache_used -l cache_set.list ffffa03fde4c0050
  btree_cache_used = 2097
crash> list -s btree -l btree.list -H ffffa03fde4c1140|grep -E -A2 "^  lock = {" > btree_cache.txt
crash> list -s btree -l btree.list -H ffffa03fde4c1150|grep -E -A2 "^  lock = {" > btree_cache_freeable.txt
[root@node-3 127.0.0.1-2023-08-04-16:40:28]# pwd
/var/crash/127.0.0.1-2023-08-04-16:40:28
[root@node-3 127.0.0.1-2023-08-04-16:40:28]# cat btree_cache.txt|grep counter|grep -v "counter = 0"
[root@node-3 127.0.0.1-2023-08-04-16:40:28]# cat btree_cache_freeable.txt|grep counter|grep -v "counter = 0"
      counter = 1

We found that this is a bug in bch_sectors_dirty_init() when locking c->root:
    (1). Thread X has locked c->root(A) write.
    (2). Thread Y failed to lock c->root(A), waiting for the lock(c->root A).
    (3). Thread X bch_btree_set_root() changes c->root from A to B.
    (4). Thread X releases the lock(c->root A).
    (5). Thread Y successfully locks c->root(A).
    (6). Thread Y releases the lock(c->root B).

        down_write locked ---(1)----------------------┐
                |                                     |
                |   down_read waiting ---(2)----┐     |
                |           |               ┌-------------┐ ┌-------------┐
        bch_btree_set_root ===(3)========>> | c->root   A | | c->root   B |
                |           |               └-------------┘ └-------------┘
            up_write ---(4)---------------------┘     |            |
                            |                         |            |
                    down_read locked ---(5)-----------┘            |
                            |                                      |
                        up_read ---(6)-----------------------------┘

Since c->root may change, the correct steps to lock c->root should be
the same as bch_root_usage(), compare after locking.

static unsigned int bch_root_usage(struct cache_set *c)
{
        unsigned int bytes = 0;
        struct bkey *k;
        struct btree *b;
        struct btree_iter iter;

        goto lock_root;

        do {
                rw_unlock(false, b);
lock_root:
                b = c->root;
                rw_lock(false, b, b->level);
        } while (b != c->root);

        for_each_key_filter(&b->keys, k, &iter, bch_ptr_bad)
                bytes += bkey_bytes(k);

        rw_unlock(false, b);

        return (bytes * 100) / btree_bytes(c);
}

Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-7-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: fixup init dirty data errors

commit 7cc47e64d3d69786a2711a4767e26b26ba63d7ed upstream.

We found that after long run, the dirty_data of the bcache device
will have errors. This error cannot be eliminated unless re-register.

We also found that reattach after detach, this error can accumulate.

In bch_sectors_dirty_init(), all inode <= d->id keys will be recounted
again. This is wrong, we only need to count the keys of the current
device.

Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: prevent potential division by zero error

commit 2c7f497ac274a14330208b18f6f734000868ebf9 upstream.

In SHOW(), the variable 'n' is of type 'size_t.' While there is a
conditional check to verify that 'n' is not equal to zero before
executing the 'do_div' macro, concerns arise regarding potential
division by zero error in 64-bit environments.

The concern arises when 'n' is 64 bits in size, greater than zero, and
the lower 32 bits of it are zeros. In such cases, the conditional check
passes because 'n' is non-zero, but the 'do_div' macro casts 'n' to
'uint32_t,' effectively truncating it to its lower 32 bits.
Consequently, the 'n' value becomes zero.

To fix this potential division by zero error and ensure precise
division handling, this commit replaces the 'do_div' macro with
div64_u64(). div64_u64() is designed to work with 64-bit operands,
guaranteeing that division is performed correctly.

This change enhances the robustness of the code, ensuring that division
operations yield accurate results in all scenarios, eliminating the
possibility of division by zero, and improving compatibility across
different 64-bit environments.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: check return value from btree_node_alloc_replacement()

commit 777967e7e9f6f5f3e153abffb562bffaf4430d26 upstream.

In btree_gc_rewrite_node(), pointer 'n' is not checked after it returns
from btree_gc_rewrite_node(). There is potential possibility that 'n' is
a non NULL ERR_PTR(), referencing such error code is not permitted in
following code. Therefore a return value checking is necessary after 'n'
is back from btree_node_alloc_replacement().

Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231120052503.6122-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

veth: Use tstats per-CPU traffic counters

[ Upstream commit 6f2684bf2b4460c84d0d34612a939f78b96b03fc ]

Currently veth devices use the lstats per-CPU traffic counters, which only
cover TX traffic. veth_get_stats64() actually populates RX stats of a veth
device from its peer's TX counters, based on the assumption that a veth
device can _only_ receive packets from its peer, which is no longer true:

For example, recent CNIs (like Cilium) can use the bpf_redirect_peer() BPF
helper to redirect traffic from NIC's tc ingress to veth's tc ingress (in
a different netns), skipping veth's peer device. Unfortunately, this kind
of traffic isn't currently accounted for in veth's RX stats.

In preparation for the fix, use tstats (instead of lstats) to maintain
both RX and TX counters for each veth device. We'll use RX counters for
bpf_redirect_peer() traffic, and keep using TX counters for the usual
"peer-to-peer" traffic. In veth_get_stats64(), calculate RX stats by
_adding_ RX count to peer's TX count, in order to cover both kinds of
traffic.

veth_stats_rx() might need a name change (perhaps to "veth_stats_xdp()")
for less confusion, but let's leave it to another patch to keep the fix
minimal.

Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-5-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm-delay: fix a race between delay_presuspend and delay_bio

[ Upstream commit 6fc45b6ed921dc00dfb264dc08c7d67ee63d2656 ]

In delay_presuspend, we set the atomic variable may_delay and then stop
the timer and flush pending bios. The intention here is to prevent the
delay target from re-arming the timer again.

However, this test is racy. Suppose that one thread goes to delay_bio,
sees that dc->may_delay is one and proceeds; now, another thread executes
delay_presuspend, it sets dc->may_delay to zero, deletes the timer and
flushes pending bios. Then, the first thread continues and adds the bio to
delayed->list despite the fact that dc->may_delay is false.

Fix this bug by changing may_delay's type from atomic_t to bool and
only access it while holding the delayed_bios_lock mutex. Note that we
don't have to grab the mutex in delay_resume because there are no bios
in flight at this point.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Add quirks for ASUS 2024 Zenbooks

[ Upstream commit 61cbc08fdb04fd445458b0f4cba7e6929afdfaef ]

These ASUS Zenbook laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using SPI or I2C with External Boost or
Internal Boost.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115162116.494968-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus

[ Upstream commit 6ae90e906aed727759b88eb2b000fcdc8fcd94a3 ]

Proposed patch fixes initialization of CSC3551 on the UM5302LA laptop.
Patching DSDT table is not required since ASUS did added _DSD entry.
Nothing new introduced but reused work started by Stefan B.

Currently there is no official firmware available for 10431A83 on
cirrus git unfortunately.
For testing used 104317f3 (which is also seems on i2c bus):

$ cd /lib/firmware/cirrus/ && \
for fw in $(find ./ -name '*104317f3*'); do newfw=$(echo $fw | sed 's/104317f3/10431a83/g'); echo echo "$fw -> $newfw"; ln -s $f $newfw; done

With the patch applied to 6.6.0 and obviously symlinks to 104317F3 FW,
speakers works and to my susrprise they sound quite good and loud
without distortion.

Probably confirmation from cirrus team is needed on firmware.

Signed-off-by: Vitalii Torshyn <vitaly.torshyn@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218119
Link: https://lore.kernel.org/r/CAHiQ-bCMPpCJ8eOYAaVVoqGkFixS1qTgSS4xfbZvL4oZV9LYew@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 61cbc08fdb04 ("ALSA: hda/realtek: Add quirks for ASUS 2024 Zenbooks")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix leak of iface for primary channel

[ Upstream commit 29954d5b1e0d67a4cd61c30c2201030c97e94b1e ]

My last change in this area introduced a change which
accounted for primary channel in the interface ref count.
However, it did not reduce this ref count on deallocation
of the primary channel. i.e. during umount.

Fixing this leak here, by dropping this ref count for
primary channel while freeing up the session.

Fixes: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Cc: stable@vger.kernel.org
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: account for primary channel in the interface list

[ Upstream commit fa1d0508bdd4a68c5e40f85f635712af8c12f180 ]

The refcounting of server interfaces should account
for the primary channel too. Although this is not
strictly necessary, doing so will account for the primary
channel in DebugData.

Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: distribute channels across interfaces based on speed

[ Upstream commit a6d8fb54a515f0546ffdb7870102b1238917e567 ]

Today, if the server interfaces RSS capable, we simply
choose the fastest interface to setup a channel. This is not
a scalable approach, and does not make a lot of attempt to
distribute the connections.

This change does a weighted distribution of channels across
all the available server interfaces, where the weight is
a function of the advertised interface speed.

Also make sure that we don't mix rdma and non-rdma for channels.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY"

commit 7a784bcdd7e54f0599da3b2360e472238412623e upstream.

This reverts commit 134e6d25f6bd06071e5aac0a7eefcea6f7713955.

The recently added Realtek PHY drivers depend on the new port status
notification mechanism which was built on the deprecated USB PHY
implementation and devicetree binding.

Specifically, using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property which is clearly wrong.

We should not be building new functionality on top of the legacy USB PHY
implementation even if it is currently stuck in some kind of
transitional limbo.

Revert the new Realtek PHY drivers for now so that the port status
notification interface can be reverted and replaced.

Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY")
Cc: stable@vger.kernel.org # 6.6
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231106110654.31090-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY"

commit 258ea41c926b7b3a16d0d7aa210a1401c4a1601b upstream.

This reverts commit adda6e82a7de7d6d478f6c8ef127f0ac51c510a1.

The recently added Realtek PHY drivers depend on the new port status
notification mechanism which was built on the deprecated USB PHY
implementation and devicetree binding.

Specifically, using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property which is clearly wrong.

We should not be building new functionality on top of the legacy USB PHY
implementation even if it is currently stuck in some kind of
transitional limbo.

Revert the new Realtek PHY drivers for now so that the port status
notification interface can be reverted and replaced.

Fixes: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY")
Cc: stable@vger.kernel.org # 6.6
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231106110654.31090-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: phy: add usb phy notify port status API"

commit 1a229d8690a0f8951fc4aa8b76a7efab0d8de342 upstream.

This reverts commit a08799cf17c22375752abfad3b4a2b34b3acb287.

The recently added Realtek PHY drivers depend on the new port status
notification mechanism which was built on the deprecated USB PHY
implementation and devicetree binding.

Specifically, using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property which is clearly wrong.

We should not be building new functionality on top of the legacy USB PHY
implementation even if it is currently stuck in some kind of
transitional limbo.

Revert the new notification interface which is broken by design.

Fixes: a08799cf17c2 ("usb: phy: add usb phy notify port status API")
Cc: stable@vger.kernel.org # 6.6
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231106110654.31090-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Mark VF as slave before exposing it to user-mode

commit c807d6cd089d2f4951baa838081ec5ae3e2360f8 upstream.

When a VF is being exposed form the kernel, it should be marked as "slave"
before exposing to the user-mode. The VF is not usable without netvsc
running as master. The user-mode should never see a VF without the "slave"
flag.

This commit moves the code of setting the slave flag to the time before
VF is exposed to user-mode.

Cc: stable@vger.kernel.org
Fixes: 0c195567a8f6 ("netvsc: transparent VF management")
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Fix race of register_netdevice_notifier and VF register

commit 85520856466ed6bc3b1ccb013cddac70ceb437db upstream.

If VF NIC is registered earlier, NETDEV_REGISTER event is replayed,
but NETDEV_POST_INIT is not.

Move register_netdevice_notifier() earlier, so the call back
function is set before probing.

Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: fix race of netvsc and VF register_netdevice

commit d30fb712e52964f2cf9a9c14cf67078394044837 upstream.

The rtnl lock also needs to be held before rndis_filter_device_add()
which advertises nvsp_2_vsc_capability / sriov bit, and triggers
VF NIC offering and registering. If VF NIC finished register_netdev()
earlier it may cause name based config failure.

To fix this issue, move the call to rtnl_lock() before
rndis_filter_device_add(), so VF will be registered later than netvsc
/ synthetic NIC, and gets a name numbered (ethX) after netvsc.

Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>