mptcp: netlink: process IPv6 addrs in creating listening sockets

[ Upstream commit 029744cd4bc6e9eb3bd833b4a033348296d34645 ]

This change updates mptcp_pm_nl_create_listen_socket() to create
listening sockets bound to IPv6 addresses (where IPv6 is supported).

Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Acked-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: fix hwmon node of power1_label create issue

[ Upstream commit a8b1e8636a3252daa729762b2e3cc9015cc91a5c ]

it will cause hwmon node of power1_label is not created.

v2:
the hwmon node of "power1_label" is always needed for all ASICs.
and the patch will remove ASIC type check for "power1_label".

Fixes: ae07970a0621d6 ("drm/amd/pm: add support for hwmon control of slow and fast PPT limit on vangogh")

Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd-xgbe: disable interrupts during pci removal

[ Upstream commit 68c2d6af1f1e469544d6cbe9a601d96fb9c00e7f ]

Hardware interrupts are enabled during the pci probe, however,
they are not disabled during pci removal.

Disable all hardware interrupts during pci removal to avoid any
issues.

Fixes: e75377404726 ("amd-xgbe: Update PCI support to use new IRQ functions")
Suggested-by: Selwin Sebastian <Selwin.Sebastian@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: rate limit warning for received illegal binding update

[ Upstream commit c7223d687758462826a20e9735305d55bb874c70 ]

It would be easy to craft a message containing an illegal binding table
update operation. This is handled correctly by the code, but the
corresponding warning printout is not rate limited as is should be.
We fix this now.

Fixes: b97bf3fd8f6a ("[TIPC] Initial merge")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE

[ Upstream commit bc1c3c3b10db4f37c41e6107751a8d450d9c431c ]

Fix loading of the driver when built as a module.

Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

veth: fix races around rq->rx_notify_masked

[ Upstream commit 68468d8c4cd4222a4ca1f185ab5a1c14480d078c ]

veth being NETIF_F_LLTX enabled, we need to be more careful
whenever we read/write rq->rx_notify_masked.

BUG: KCSAN: data-race in veth_xmit / veth_xmit

write to 0xffff888133d9a9f8 of 1 bytes by task 23552 on cpu 0:
 __veth_xdp_flush drivers/net/veth.c:269 [inline]
 veth_xmit+0x307/0x470 drivers/net/veth.c:350
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
 NF_HOOK include/linux/netfilter.h:307 [inline]
 br_forward_finish net/bridge/br_forward.c:66 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
 br_dev_xmit+0x8b6/0x960
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 neigh_hh_output include/net/neighbour.h:525 [inline]
 neigh_output include/net/neighbour.h:539 [inline]
 ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out net/ipv4/ip_output.c:126 [inline]
 ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888133d9a9f8 of 1 bytes by task 23563 on cpu 1:
 __veth_xdp_flush drivers/net/veth.c:268 [inline]
 veth_xmit+0x2d6/0x470 drivers/net/veth.c:350
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
 NF_HOOK include/linux/netfilter.h:307 [inline]
 br_forward_finish net/bridge/br_forward.c:66 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
 br_dev_xmit+0x8b6/0x960
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 neigh_hh_output include/net/neighbour.h:525 [inline]
 neigh_output include/net/neighbour.h:539 [inline]
 ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out net/ipv4/ip_output.c:126 [inline]
 ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23563 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00064-gc36c04c2e132 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 948d4f214fde ("veth: Add driver XDP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix a memleak when uncloning an skb dst and its metadata

[ Upstream commit 9eeabdf17fa0ab75381045c867c370f4cc75a613 ]

When uncloning an skb dst and its associated metadata, a new
dst+metadata is allocated and later replaces the old one in the skb.
This is helpful to have a non-shared dst+metadata attached to a specific
skb.

The issue is the uncloned dst+metadata is initialized with a refcount of
1, which is increased to 2 before attaching it to the skb. When
tun_dst_unclone returns, the dst+metadata is only referenced from a
single place (the skb) while its refcount is 2. Its refcount will never
drop to 0 (when the skb is consumed), leading to a memory leak.

Fix this by removing the call to dst_hold in tun_dst_unclone, as the
dst+metadata refcount is already 1.

Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.")
Cc: Pravin B Shelar <pshelar@ovn.org>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: do not keep the dst cache when uncloning an skb dst and its metadata

[ Upstream commit cfc56f85e72f5b9c5c5be26dc2b16518d36a7868 ]

When uncloning an skb dst and its associated metadata a new dst+metadata
is allocated and the tunnel information from the old metadata is copied
over there.

The issue is the tunnel metadata has references to cached dst, which are
copied along the way. When a dst+metadata refcount drops to 0 the
metadata is freed including the cached dst entries. As they are also
referenced in the initial dst+metadata, this ends up in UaFs.

In practice the above did not happen because of another issue, the
dst+metadata was never freed because its refcount never dropped to 0
(this will be fixed in a subsequent patch).

Fix this by initializing the dst cache after copying the tunnel
information from the old metadata to also unshare the dst cache.

Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: flower: fix ida_idx not being released

[ Upstream commit 7db788ad627aabff2b74d4f1a3b68516d0fee0d7 ]

When looking for a global mac index the extra NFP_TUN_PRE_TUN_IDX_BIT
that gets set if nfp_flower_is_supported_bridge is true is not taken
into account. Consequently the path that should release the ida_index
in cleanup is never triggered, causing messages like:

    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.

after NFP_MAX_MAC_INDEX number of reconfigs. Ultimately this lead to
new tunnel flows not being offloaded.

Fix this by unsetting the NFP_TUN_PRE_TUN_IDX_BIT before checking if
the port is of type OTHER.

Fixes: 2e0bc7f3cb55 ("nfp: flower: encode mac indexes with pre-tunnel rule check")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220208101453.321949-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path

[ Upstream commit 5611a00697c8ecc5aad04392bea629e9d6a20463 ]

ip[6]mr_free_table() can only be called under RTNL lock.

RTNL: assertion failed at net/core/dev.c (10367)
WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Modules linked in:
CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee
RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4
R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000
FS:  00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509
 ip6mr_free_table net/ipv6/ip6mr.c:389 [inline]
 ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline]
 ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline]
 ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298
 ops_init+0xaf/0x470 net/core/net_namespace.c:140
 setup_net+0x54f/0xbb0 net/core/net_namespace.c:331
 copy_net_ns+0x318/0x760 net/core/net_namespace.c:475
 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
 copy_namespaces+0x391/0x450 kernel/nsproxy.c:178
 copy_process+0x2e0c/0x7300 kernel/fork.c:2167
 kernel_clone+0xe7/0xab0 kernel/fork.c:2555
 __do_sys_clone+0xc8/0x110 kernel/fork.c:2672
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4ab89f9059
Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f.
RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038
RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059
RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000
RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300
R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000
R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000
 </TASK>

Fixes: f243e5a7859a ("ipmr,ip6mr: call ip6mr_free_table() on failure path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220208053451.2885398-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: lantiq_gswip: don't use devres for mdiobus

[ Upstream commit 0d120dfb5d67edc5bcd1804e167dba2b30809afd ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The GSWIP switch is a platform device, so the initial set of constraints
that I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the GSWIP switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The gswip driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mt7530: fix kernel bug in mdiobus_free() when unbinding

[ Upstream commit 9ffe3d09e32da45bb5a29cf2e80ec8d7534010c5 ]

Nobody in this driver calls mdiobus_unregister(), which is necessary if
mdiobus_register() completes successfully. So if the devres callbacks
that free the mdiobus get invoked (this is the case when unbinding the
driver), mdiobus_free() will BUG if the mdiobus is still registered,
which it is.

My speculation is that this is due to the fact that prior to commit
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
from June 2020, _devm_mdiobus_free() used to call mdiobus_unregister().
But at the time that the mt7530 support was introduced in May 2021, the
API was already changed. It's therefore likely that the blamed patch was
developed on an older tree, and incorrectly adapted to net-next. This
makes the Fixes: tag correct.

Fix the problem by using the devres variant of mdiobus_register.

Fixes: ba751e28d442 ("net: dsa: mt7530: add interrupt support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: felix: don't use devres for mdiobus

[ Upstream commit 209bdb7ec6a28c7cdf580a0a98afbc9fc3b98932 ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Felix VSC9959 switch is a PCI device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the felix switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The felix driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc_size() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: bcm_sf2: don't use devres for mdiobus

[ Upstream commit 08f1a20822349004bb9cc1b153ecb516e9f2889d ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Starfighter 2 is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the bcm_sf2 switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The bcm_sf2 driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: ar9331: register the mdiobus under devres

[ Upstream commit 50facd86e9fbc4b93fe02e5fe05776047f45dbfb ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The ar9331 is an MDIO device, so the initial set of constraints that I
thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the ar9331 switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The ar9331 driver doesn't have a complex code structure for mdiobus
removal, so just replace of_mdiobus_register with the devres variant in
order to be all-devres and ensure that we don't free a still-registered
bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: don't use devres for mdiobus

[ Upstream commit f53a2ce893b2c7884ef94471f170839170a4eba0 ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The mv88e6xxx is an MDIO device, so the initial set of constraints that
I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the Marvell switch driver on shutdown.

systemd-shutdown[1]: Powering off.
mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down
fsl-mc dpbp.9: Removing from iommu group 7
fsl-mc dpbp.8: Removing from iommu group 7
------------[ cut here ]------------
kernel BUG at drivers/net/phy/mdio_bus.c:677!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15
pc : mdiobus_free+0x44/0x50
lr : devm_mdiobus_free+0x10/0x20
Call trace:
 mdiobus_free+0x44/0x50
 devm_mdiobus_free+0x10/0x20
 devres_release_all+0xa0/0x100
 __device_release_driver+0x190/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x4c/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x94/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_device_remove+0x24/0x40
 __fsl_mc_device_remove+0xc/0x20
 device_for_each_child+0x58/0xa0
 dprc_remove+0x90/0xb0
 fsl_mc_driver_remove+0x20/0x5c
 __device_release_driver+0x21c/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_bus_remove+0x80/0x100
 fsl_mc_bus_shutdown+0xc/0x1c
 platform_shutdown+0x20/0x30
 device_shutdown+0x154/0x330
 kernel_power_off+0x34/0x6c
 __do_sys_reboot+0x15c/0x250
 __arm64_sys_reboot+0x20/0x30
 invoke_syscall.constprop.0+0x4c/0xe0
 do_el0_svc+0x4c/0x150
 el0_svc+0x24/0xb0
 el0t_64_sync_handler+0xa8/0xb0
 el0t_64_sync+0x178/0x17c

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The Marvell driver already has a good structure for mdiobus removal, so
just plug in mdiobus_free and get rid of devres.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Rafael Richter <Rafael.Richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Daniel Klauer <daniel.klauer@gin.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: pair enable_port with slave_arr_updates

[ Upstream commit 23de0d7b6f0e3f9a6283a882594c479949da1120 ]

When 803.2ad mode enables a participating port, it should update
the slave-array. I have observed that the member links are participating
and are part of the active aggregator while the traffic is egressing via
only one member link (in a case where two links are participating). Via
kprobes I discovered that slave-arr has only one link added while
the other participating link wasn't part of the slave-arr.

I couldn't see what caused that situation but the simple code-walk
through provided me hints that the enable_port wasn't always associated
with the slave-array update.

Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbcon: Avoid 'cap' set but not used warning

[ Upstream commit 50b10528aad568c95f772039d4b3093b4aea7439 ]

Fix this kernel test robot warning:

  drivers/video/fbdev/core/fbcon.c: In function 'fbcon_init':
  drivers/video/fbdev/core/fbcon.c:1028:6: warning: variable 'cap' set but not used [-Wunused-but-set-variable]

The cap variable is only used when CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
is enabled. Drop the temporary variable and use info->flags instead.

Fixes: 87ab9f6b7417 ("Revert "fbcon: Disable accelerated scrolling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YgFB4xqI+As196FR@p100
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: sifive: use the correct register to read output values

[ Upstream commit cc38ef936840ac29204d806deb4d1836ec509594 ]

Setting the output of a GPIO to 1 using gpiod_set_value(), followed by
reading the same GPIO using gpiod_get_value(), will currently yield an
incorrect result.

This is because the SiFive GPIO device stores the output values in reg_set,
not reg_dat.

Supply the flag BGPIOF_READ_OUTPUT_REG_SET to bgpio_init() so that the
generic driver reads the correct register.

Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: added the Fixes tag]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: Never return internal error codes to user space

[ Upstream commit 95a4eed7dd5b7c1c3664a626174290686ddbee9f ]

Currently it's possible that character device interface may return
the error codes which are not supposed to be seen by user space.
In this case it's EPROBE_DEFER.

Wrap it to return -ENODEV instead as sysfs does.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Reported-by: Suresh Balakrishnan <suresh.balakrishnan@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE

[ Upstream commit dc0075ba7f387fe4c48a8c674b11ab6f374a6acc ]

Commit 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while
suspended to idle") made acpi_ec_dispatch_gpe() check
pm_wakeup_pending(), but that is before canceling the SCI wakeup,
so pm_wakeup_pending() is always true.  This causes the loop in
acpi_ec_dispatch_gpe() to always terminate after one iteration which
may not be correct.

Address this issue by canceling the SCI wakeup earlier, from
acpi_ec_dispatch_gpe() itself.

Fixes: 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: simple: Assign data from panel_dpi_probe() correctly

[ Upstream commit 6df4432a5eca101b5fd80fbee41d309f3d67928d ]

In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().

Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support")

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbevf: Require large buffers for build_skb on 82599VF

[ Upstream commit fe68195daf34d5dddacd3f93dd3eafc4beca3a0e ]

From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb
around new data in the page buffer shared with the ixgbe PF.
This uses either a 2K or 3K buffer, and offsets the DMA mapping by
NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to
ensure the PF does not write a full 2K bytes into the buffer, which is
actually 2K minus the offset.

However on the 82599 virtual function, the RXDCTL mechanism is not
available. The driver attempts to work around this by using the SET_LPE
mailbox method to lower the maximm frame size, but the ixgbe PF driver
ignores this in order to keep the PF and all VFs in sync[0].

This means the PF will write up to the full 2K set in SRRCTL, causing it
to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer.
With 4K pages split into two buffers, this means it either writes
NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the
second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA
mapping.

Avoid this by only enabling build_skb when using "large" buffers (3K).
These are placed in each half of an order-1 page, preventing the PF from
writing past the end of the mapping.

[0]: Technically it only ever raises the max frame size, see
ixgbe_set_vf_lpe() in ixgbe_sriov.c

Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1-odroid: fix boot loop after reboot

[ Upstream commit e6b03375132fefddc55cf700418cf794b3884e0c ]

Since the correct gpio pin is used for enabling tf-io regulator the
system did not boot correctly after calling reboot.

[   36.862443] reboot: Restarting system
bl31 reboot reason: 0xd
bl31 reboot reason: 0x0
system cmd  1.
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.0;CHK:0;
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id:
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:1;...

Setting the gpio to open drain solves the issue.

Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: reduced serial log & removed invalid character in commit message]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220128193150.GA1304381@odroid-VirtualBox
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2

[ Upstream commit a5be3e5d46f373fe1d2ee835c7ede31769c241cd ]

GPIOE_2 is in AO domain and "<&gpio GPIOE_2 ...>" changes the state of
TF_PWR_EN of 'FC8731' on BPI-M5

Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220127151656.GA2419733@paju
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator

[ Upstream commit 323ca765bfe9d637fa774373baec0bc41e51fcfa ]

The interrupt pin of the external ethernet phy is used, instead of the
enable-gpio pin of the tf-io regulator. The GPIOE_2 pin is located in
the gpio_ao bank.

This causes phy interrupt problems at system startup.
[   76.645190] irq 36: nobody cared (try booting with the "irqpoll" option)
[   76.649617] CPU: 0 PID: 1416 Comm: irq/36-0.0:00 Not tainted 5.16.0 #2
[   76.649629] Hardware name: Hardkernel ODROID-HC4 (DT)
[   76.649635] Call trace:
[   76.649638]  dump_backtrace+0x0/0x1c8
[   76.649658]  show_stack+0x14/0x60
[   76.649667]  dump_stack_lvl+0x64/0x7c
[   76.649676]  dump_stack+0x14/0x2c
[   76.649683]  __report_bad_irq+0x38/0xe8
[   76.649695]  note_interrupt+0x220/0x3a0
[   76.649704]  handle_irq_event_percpu+0x58/0x88
[   76.649713]  handle_irq_event+0x44/0xd8
[   76.649721]  handle_fasteoi_irq+0xa8/0x130
[   76.649730]  generic_handle_domain_irq+0x38/0x58
[   76.649738]  gic_handle_irq+0x9c/0xb8
[   76.649747]  call_on_irq_stack+0x28/0x38
[   76.649755]  do_interrupt_handler+0x7c/0x80
[   76.649763]  el1_interrupt+0x34/0x80
[   76.649772]  el1h_64_irq_handler+0x14/0x20
[   76.649781]  el1h_64_irq+0x74/0x78
[   76.649788]  irq_finalize_oneshot.part.56+0x68/0xf8
[   76.649796]  irq_thread_fn+0x5c/0x98
[   76.649804]  irq_thread+0x13c/0x260
[   76.649812]  kthread+0x144/0x178
[   76.649822]  ret_from_fork+0x10/0x20
[   76.649830] handlers:
[   76.653170] [<0000000025a6cd31>] irq_default_primary_handler threaded [<0000000093580eb7>] phy_interrupt
[   76.661256] Disabling IRQ #36

Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: removed spurious invalid & blank lines from commit message]
Link: https://lore.kernel.org/r/20220127130537.GA187347@odroid-VirtualBox
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'

[ Upstream commit bc41099f060ea74ac8d02c51bd0f5f46d969bedf ]

Typo in audio amplifier node, dioo2133 -> dio2133

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Fixes: ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")
Fixes: 67d141c1f8e6 ("arm64: dts: meson: odroid-n2: add jack audio output support")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YfKQJejh0bfGYvof@anyang
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ctnetlink: disable helper autoassign

[ Upstream commit d1ca60efc53d665cf89ed847a14a510a81770b81 ]

When userspace, e.g. conntrackd, inserts an entry with a specified helper,
its possible that the helper is lost immediately after its added:

ctnetlink_create_conntrack
  -> nf_ct_helper_ext_add + assign helper
    -> ctnetlink_setup_nat
      -> ctnetlink_parse_nat_setup
         -> parse_nat_setup -> nfnetlink_parse_nat_setup
                       -> nf_nat_setup_info
                                 -> nf_conntrack_alter_reply
                                   -> __nf_ct_try_assign_helper

... and __nf_ct_try_assign_helper will zero the helper again.

Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like
when helper is assigned via ruleset.

Dropped old 'not strictly necessary' comment, it referred to use of
rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER().

NB: Fixes tag intentionally incorrect, this extends the referenced commit,
but this change won't build without IPS_HELPER introduced there.

Fixes: 6714cf5465d280 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT")
Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sparx5: Fix get_stat64 crash in tcpdump

[ Upstream commit ed14fc7a79ab43e9f2cb1fa9c1733fdc133bba30 ]

This problem was found with Sparx5 when the tcpdump tool requests the
do_get_stats64 (sparx5_get_stats64) statistic.

The portstats pointer was incorrectly incremented when fetching priority
based statistics.

Fixes: af4b11022e2d (net: sparx5: add ethtool configuration and statistics support)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220203102900.528987-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: fastrpc: avoid double fput() on failed usercopy

[ Upstream commit 46963e2e0629cb31c96b1d47ddd89dc3d8990b34 ]

If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF
ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact,
dma_buf_fd() called fd_install() before, i.e. "consumed" one reference,
leaving us with none.

Calling dma_buf_put() will therefore put a reference we no longer own,
leading to a valid file descritor table entry for an already released
'file' object which is a straight use-after-free.

Simply avoid calling dma_buf_put() and rely on the process exit code to
do the necessary cleanup, if needed, i.e. if the file descriptor is
still valid.

Fixes: 6cffd79504ce ("misc: fastrpc: Add support for dmabuf exporter")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20220127130218.809261-1-minipli@grsecurity.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd.

[ Upstream commit 1d118965965f89948236ebe23072bb1fca5e7832 ]

The 2711 pixel valve can't produce odd horizontal timings, and
checks were added to vc4_hdmi_encoder_atomic_check and
vc4_hdmi_encoder_mode_valid to filter out/block selection of
such modes.

Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing
values before programming them into the PV. The PV values,
therefore, can not be odd, and so the modes can be supported.

Amend the filtering appropriately.

Fixes: 57fb32e632be ("drm/vc4: hdmi: Block odd horizontal timings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Don't skip directory entries when doing uncached readdir

[ Upstream commit ce292d8faf41f62e0fb0c78476c6fce5d629235a ]

Ensure that we initialise desc->cache_entry_index correctly in
uncached_readdir().

Fixes: d1bacf9eb2fd ("NFS: add readdir cache array")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Don't overfill uncached readdir pages

[ Upstream commit d9c4e39c1f8f8a8ebaccf00b8f22c14364b2d27e ]

If we're doing an uncached read of the directory, then we ideally want
to read only the exact set of entries that will fit in the buffer
supplied by the getdents() system call. So unlike the case where we're
reading into the page cache, let's send only one READDIR call, before
trying to fill up the buffer.

Fixes: 35df59d3ef69 ("NFS: Reduce number of RPC calls when doing uncached readdir")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: aggregator: Fix calling into sleeping GPIO controllers

[ Upstream commit 2cba05451a6d0c703bb74f1a250691404f27c4f1 ]

If the parent GPIO controller is a sleeping controller (e.g. a GPIO
controller connected to I2C), getting or setting a GPIO triggers a
might_sleep() warning.  This happens because the GPIO Aggregator takes
the can_sleep flag into account only for its internal locking, not for
calling into the parent GPIO controller.

Fix this by using the gpiod_[gs]et*_cansleep() APIs when calling into a
sleeping GPIO controller.

Reported-by: Mikko Salomäki <ms@datarespons.se>
Fixes: 828546e24280f721 ("gpio: Add GPIO Aggregator")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: dphy: Correct clk_pre parameter

[ Upstream commit 9a8406ba1a9a2965c27e0db1d7753471d12ee9ff ]

The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE
parameter's unit is Unit Interval(UI) and the minimum value is 8.  Also,
kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy
mentions that it should be in UI.  However, the dphy core driver wrongly
sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds.

So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE
parameter's minimum value according to the D-PHY specification.

I'm assuming that all impacted custom drivers shall program values in
TxByteClkHS cycles into hardware for the T-CLK-PRE parameter.  The D-PHY
specification mentions that the frequency of TxByteClkHS is exactly 1/8
the High-Speed(HS) bit rate(each HS bit consumes one UI).  So, relevant
custom driver code is changed to program those values as
DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then.

Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.

Fixes: 2ed869990e14 ("phy: Add MIPI D-PHY configuration options")
Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: f_fs: Fix use-after-free for epfile

[ Upstream commit ebe2b1add1055b903e2acd86b290a85297edc0b3 ]

Consider a case where ffs_func_eps_disable is called from
ffs_func_disable as part of composition switch and at the
same time ffs_epfile_release get called from userspace.
ffs_epfile_release will free up the read buffer and call
ffs_data_closed which in turn destroys ffs->epfiles and
mark it as NULL. While this was happening the driver has
already initialized the local epfile in ffs_func_eps_disable
which is now freed and waiting to acquire the spinlock. Once
spinlock is acquired the driver proceeds with the stale value
of epfile and tries to free the already freed read buffer
causing use-after-free.

Following is the illustration of the race:

      CPU1                                  CPU2

   ffs_func_eps_disable
   epfiles (local copy)
ffs_epfile_release
ffs_data_closed
if (last file closed)
ffs_data_reset
ffs_data_clear
ffs_epfiles_destroy
spin_lock
dereference epfiles

Fix this races by taking epfiles local copy & assigning it under
spinlock and if epfiles(local) is null then update it in ffs->epfiles
then finally destroy it.
Extending the scope further from the race, protecting the ep related
structures, and concurrent accesses.

Fixes: a9e6f83c2df1 ("usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable")
Co-developed-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/1643256595-10797-1-git-send-email-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers

[ Upstream commit 283d45145fbf460dbaf0229cacd7ed60ec52f364 ]

The port numbers for the imx8mq mipi csi controller are wrong and
the mipi driver can't find any media devices as port@1 is connected
to the CSI bridge, not port@0. And port@0 is connected to the
source - the sensor. Fix this.

Fixes: bcadd5f66c2a ("arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo

[ Upstream commit 6d58c5e21a3fe355ce6d1808e96d02a610265218 ]

The correct property name is 'assigned-clock-parents', not
'assigned-clocks-parents'. Though if the platform works with the typo, one
has to wonder if the property is even needed.

Signed-off-by: Rob Herring <robh@kernel.org>
Fixes: 8b8c7d97e2c7 ("ARM: dts: imx7ulp: Add wdog1 node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()

[ Upstream commit cfc826c88a79e22ba5d8001556eb2c7efd8a01b6 ]

This error path needs to decrement "usbphyc->n_pll_cons.counter" before
returning.

Fixes: 5b1af71280ab ("phy: stm32: rework PLL Lock detection")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220112111724.GB3019@kili
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: xilinx: zynqmp: Fix bus width setting for SGMII

[ Upstream commit 37291f60d0822f191748c2a54ce63b0bc669020f ]

TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with
separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was
not preserving the existing register value for other lanes, so enabling
the PHY in SGMII mode on one lane zeroed out the settings for all other
lanes, causing other PS-GTR peripherals such as USB3 to malfunction.

Use xpsgtr_clr_set to only manipulate the desired bits in the register.

Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220126001600.1592218-1-robert.hancock@calian.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-udoo: Properly describe the SD card detect

[ Upstream commit 993d66140f8d1c1853a3b58b77b43b681eb64dee ]

GPIO7_IO00 is used as SD card detect.

Properly describe this in the devicetree.

Fixes: 40cdaa542cf0 ("ARM: dts: imx6q-udoo: Add initial board support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: fbtft: Fix error path in fbtft_driver_module_init()

[ Upstream commit 426aca16e903b387a0b0001d62207a745c67cfd3 ]

If registering the platform driver fails, the function must not return
without undoing the spi driver registration first.

Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220118181338.207943-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option

[ Upstream commit 5070ce86246a8a4ebacd0c15b121e6b6325bc167 ]

The previous commit 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on
the BCM4908") added a second "default" line for ARCH_BCM_4908 above
the original "default" line for ARCH_BRCMSTB. When two "default"
lines are used, only the first is used and this change stopped
the PHY_BRCM_USB option for being enabled for ARCH_BRCMSTB.
The fix is to use one "default line with "||".

Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211201180653.35097-4-alcooperx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: meson8b: Fix the UART device-tree schema validation

[ Upstream commit 3375aa77135f6aeb1107ed839a2050a4118444bc ]

The dt-bindings for the UART controller only allow the following values
for Meson8 SoCs:
- "amlogic,meson8b-uart", "amlogic,meson-ao-uart"
- "amlogic,meson8b-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Also update the order of the clocks to match the order defined in the
yaml bindings.

Fixes: b02d6e73f5fc96 ("ARM: dts: meson8b: use stable UART bindings with correct gate clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-4-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: meson8: Fix the UART device-tree schema validation

[ Upstream commit 57007bfb5469ba31cacf69d52195e8b75f43e32d ]

The dt-bindings for the UART controller only allow the following values
for Meson8 SoCs:
- "amlogic,meson8-uart", "amlogic,meson-ao-uart"
- "amlogic,meson8-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Also update the order of the clocks to match the order defined in the
yaml schema.

Fixes: 6ca77502050eff ("ARM: dts: meson8: use stable UART bindings with correct gate clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: meson: Fix the UART compatible strings

[ Upstream commit 5225e1b87432dcf0d0fc3440824b91d04c1d6cc1 ]

The dt-bindings for the UART controller only allow the following values
for Meson6 SoCs:
- "amlogic,meson6-uart", "amlogic,meson-ao-uart"
- "amlogic,meson6-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Fixes: ec9b59162fd831 ("ARM: dts: meson6: use stable UART bindings")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix timer regression for beagleboard revision c

[ Upstream commit 23885389dbbbbc698986e77a45c1fc44a6e3632e ]

Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.

Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.

Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.

Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Populate pipe dbuf slices more accurately during readout

commit 85bb289215cf37e05e9581b39b114db1293f9ecd upstream.

During readout we cannot assume the planes are actually using the
slices they are supposed to use. The BIOS may have misprogrammed
things and put the planes onto the wrong dbuf slices. So let's
do the readout more carefully to make sure we really know which
dbuf slices are actually in use by the pipe at the time.

Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b3dcc6dc0f32612d04839c2fb32e94d0ebf92c98)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Allow !join_mbus cases for adlp+ dbuf configuration

commit 8fd5a26e43859547790a7995494c952b708ab3b5 upstream.

Reintroduce the !join_mbus single pipe cases for adlp+.

Due to the mbus relative dbuf offsets in PLANE_BUF_CFG we
need to know the actual slices used by the pipe when doing
readout, even when mbus joining isn't enabled. Accurate
readout will be needed to properly sanitize invalid BIOS
dbuf configurations.

This will also make it much easier to play around with the
!join_mbus configs for testin/workaround purposes.

Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit eef173954432fe0612acb63421a95deb41155cdc)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: vop: Correct RK3399 VOP register fields

commit 9da1e9ab82c92d0e89fe44cad2cd7c2d18d64070 upstream.

Commit 7707f7227f09 ("drm/rockchip: Add support for afbc") switched up
the rk3399_vop_big[] register windows, but it did so incorrectly.

The biggest problem is in rk3288_win23_data[] vs.
rk3368_win23_data[] .format field:

  RK3288's format: VOP_REG(RK3288_WIN2_CTRL0, 0x7, 1)
  RK3368's format: VOP_REG(RK3368_WIN2_CTRL0, 0x3, 5)

Bits 5:6 (i.e., shift 5, mask 0x3) are correct for RK3399, according to
the TRM.

There are a few other small differences between the 3288 and 3368
definitions that were swapped in commit 7707f7227f09. I reviewed them to
the best of my ability according to the RK3399 TRM and fixed them up.

This fixes IOMMU issues (and display errors) when testing with BG24
color formats.

Fixes: 7707f7227f09 ("drm/rockchip: Add support for afbc")
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119161104.1.I1d01436bef35165a8cdfe9308789c0badb5ff46a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/display: change pipe policy for DCN 2.0

commit 6e7545ddb13416fd200e0b91c0acfd0404e2e27b upstream.

Fixes hangs on driver load with multiple displays on
DCN 2.0 parts.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215511
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1877
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1886
Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: s2idle: ACPI: Fix wakeup interrupts handling

commit cb1f65c1e1424a4b5e4a86da8aa3b8fd8459c8ec upstream.

After commit e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed.  Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.

The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop().  However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.

To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup.  Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one.  [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]

Fixes: e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI/IORT: Check node revision for PMCG resources

commit da5fb9e1ad3fbf632dce735f1bdad257ca528499 upstream.

The original version of the IORT PMCG definition had an oversight
wherein there was no way to describe the second register page for an
implementation using the recommended RELOC_CTRS feature. Although the
spec was fixed, and the final patches merged to ACPICA and Linux written
against the new version, it seems that some old firmware based on the
original revision has survived and turned up in the wild.

Add a check for the original PMCG definition, and avoid filling in the
second memory resource with nonsense if so. Otherwise it is likely that
something horrible will happen when the PMCG driver attempts to probe.

Reported-by: Michael Petlan <mpetlan@redhat.com>
Fixes: 24e516049360 ("ACPI/IORT: Add support for PMCG")
Cc: <stable@vger.kernel.org> # 5.2.x
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/75628ae41c257fb73588f7bf1c4459160e04be2b.1643916258.git.robin.murphy@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-tcp: fix bogus request completion when failing to send AER

commit 63573807b27e0faf8065a28b1bbe1cbfb23c0130 upstream.

AER is not backed by a real request, hence we should not incorrectly
assume that when failing to send a nvme command, it is a normal request
but rather check if this is an aer and if so complete the aer (similar
to the normal completion path).

Cc: stable@vger.kernel.org
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: socfpga: fix missing RESET_CONTROLLER

commit 3037b174b1876aae6b2d1a27a878c681c78ccadc upstream.

The SocFPGA machine since commit b3ca9888f35f ("reset: socfpga: add an
early reset driver for SoCFPGA") uses reset controller, so it should
select RESET_CONTROLLER explicitly.  Selecting ARCH_HAS_RESET_CONTROLLER
is not enough because it affects only default choice still allowing a
non-buildable configuration:

  /usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq':
  arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init'

Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: b3ca9888f35f ("reset: socfpga: add an early reset driver for SoCFPGA")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: Fix boot regression on Skomer

commit d9058d6a0e92d8e4a00855f8fe204792f42794db upstream.

The signal routing on the Skomer board was incorrect making
it impossible to mount root from the SD card. Fix this up.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Cc: Stefan Hansson <newbyte@disroot.org>
Link: https://lore.kernel.org/r/20220205235312.446730-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group

commit 42c9b28e6862d16db82a56f5667cf4d1f6658cf6 upstream.

Currently, SD card fails to mount due to the following pinctrl error:

[   11.170000] imx23-pinctrl 80018000.pinctrl: pin SSP1_DETECT already requested by 80018000.pinctrl; cannot claim for 80010000.spi
[   11.180000] imx23-pinctrl 80018000.pinctrl: pin-65 (80010000.spi) status -22
[   11.190000] imx23-pinctrl 80018000.pinctrl: could not request pin 65 (SSP1_DETECT) from group mmc0-pins-fixup.0  on device 80018000.pinctrl
[   11.200000] mxs-mmc 80010000.spi: Error applying setting, reverse things back

Fix it by removing the MX23_PAD_SSP1_DETECT pin from the hog group as it
is already been used by the mmc0-pins-fixup pinctrl group.

With this change the rootfs can be mounted and the imx23-evk board can
boot successfully.

Cc: <stable@vger.kernel.org>
Fixes: bc3875f1a61e ("ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Fix gfs2_release for non-writers regression

commit d3add1a9519dcacd6e644ecac741c56cf18b67f5 upstream.

When a file is opened for writing, the vfs code (do_dentry_open)
calls get_write_access for the inode, thus incrementing the inode's write
count. That writer normally then creates a multi-block reservation for
the inode (i_res) that can be re-used by other writers, which speeds up
writes for applications that stupidly loop on open/write/close.
When the writes are all done, the multi-block reservation should be
deleted when the file is closed by the last "writer."

Commit 0ec9b9ea4f83 broke that concept when it moved the call to
gfs2_rs_delete before the check for FMODE_WRITE.  Non-writers have no
business removing the multi-block reservations of writers. In fact, if
someone opens and closes the file for RO while a writer has a
multi-block reservation, the RO closer will delete the reservation
midway through the write, and this results in:

kernel BUG at fs/gfs2/rgrp.c:677! (or thereabouts) which is:
BUG_ON(rs->rs_requested); from function gfs2_rs_deltree.

This patch moves the check back inside the check for FMODE_WRITE.

Fixes: 0ec9b9ea4f83 ("gfs2: Check for active reservation in gfs2_release")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: eliminate unreliable __builtin_frame_address(1)

commit 6a00ef4493706a23120057fafbc62379bcde11ec upstream.

I tried different pieces of code which uses __builtin_frame_address(1)
(with both gcc version 7.5.0 and 10.3.0) to verify whether it works as
expected on riscv64. The result is negative.

What the compiler had generated is as below:
31                      fp = (unsigned long)__builtin_frame_address(1);
   0xffffffff80006024 <+200>:   ld      s1,0(s0)

It takes '0(s0)' as the address of frame 1 (caller), but the actual address
should be '-16(s0)'.

          |       ...       | <-+
          +-----------------+   |
          | return address  |   |
          | previous fp     |   |
          | saved registers |   |
          | local variables |   |
  $fp --> |       ...       |   |
          +-----------------+   |
          | return address  |   |
          | previous fp --------+
          | saved registers |
  $sp --> | local variables |
          +-----------------+

This leads the kernel can not dump the full stack trace on riscv.

[    7.222126][    T1] Call Trace:
[    7.222804][    T1] [<ffffffff80006058>] dump_backtrace+0x2c/0x3a

This problem is not exposed on most riscv builds just because the '0(s0)'
occasionally is the address frame 2 (caller's caller), if only ra and fp
are stored in frame 1 (caller).

          |       ...       | <-+
          +-----------------+   |
          | return address  |   |
  $fp --> | previous fp     |   |
          +-----------------+   |
          | return address  |   |
          | previous fp --------+
          | saved registers |
  $sp --> | local variables |
          +-----------------+

This could be a *bug* of gcc that should be fixed. But as noted in gcc
manual "Calling this function with a nonzero argument can have
unpredictable effects, including crashing the calling program.", let's
remove the '__builtin_frame_address(1)' in backtrace code.

With this fix now it can show full stack trace:
[   10.444838][    T1] Call Trace:
[   10.446199][    T1] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[   10.447711][    T1] [<ffffffff800060ac>] show_stack+0x32/0x3e
[   10.448710][    T1] [<ffffffff80a005c0>] dump_stack_lvl+0x58/0x7a
[   10.449941][    T1] [<ffffffff80a005f6>] dump_stack+0x14/0x1c
[   10.450929][    T1] [<ffffffff804c04ee>] ubsan_epilogue+0x10/0x5a
[   10.451869][    T1] [<ffffffff804c092e>] __ubsan_handle_load_invalid_value+0x6c/0x78
[   10.453049][    T1] [<ffffffff8018f834>] __pagevec_release+0x62/0x64
[   10.455476][    T1] [<ffffffff80190830>] truncate_inode_pages_range+0x132/0x5be
[   10.456798][    T1] [<ffffffff80190ce0>] truncate_inode_pages+0x24/0x30
[   10.457853][    T1] [<ffffffff8045bb04>] kill_bdev+0x32/0x3c
...

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: eac2f3059e02 ("riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: cpu-hotplug: clear cpu from numa map when teardown

commit f40fe31c01445f31253b15bef2412b33ae31093b upstream.

There is numa_add_cpu() when cpus online, accordingly, there should be
numa_remove_cpu() when cpus offline.

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform")
Cc: stable@vger.kernel.org
[Palmer: Add missing NUMA include]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: fix build with binutils 2.38

commit 6df2a016c0c8a3d0933ef33dd192ea6606b115e3 upstream.

From version 2.38, binutils default to ISA spec version 20191213. This
means that the csr read/write (csrr*/csrw*) instructions and fence.i
instruction has separated from the `I` extension, become two standalone
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
this causes the following build failure:

  CC      arch/riscv/kernel/vdso/vgettimeofday.o
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h: Assembler messages:
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'

The fix is to specify those extensions explicitely in -march. However as
older binutils version do not support this, we first need to detect
that.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Report deprecated x87 features in supported CPUID

[ Upstream commit e3bcfda012edd3564e12551b212afbd2521a1f68 ]

CPUID.(EAX=7,ECX=0):EBX.FDP_EXCPTN_ONLY[bit 6] and
CPUID.(EAX=7,ECX=0):EBX.ZERO_FCS_FDS[bit 13] are "defeature"
bits. Unlike most of the other CPUID feature bits, these bits are
clear if the features are present and set if the features are not
present. These bits should be reported in KVM_GET_SUPPORTED_CPUID,
because if these bits are set on hardware, they cannot be cleared in
the guest CPUID. Doing so would claim guest support for a feature that
the hardware doesn't support and that can't be efficiently emulated.

Of course, any software (e.g WIN87EM.DLL) expecting these features to
be present likely predates these CPUID feature bits and therefore
doesn't know to check for them anyway.

Aaron Lewis added the corresponding X86_FEATURE macros in
commit cbb99c0f5887 ("x86/cpufeatures: Add FDP_EXCPTN_ONLY and
ZERO_FCS_FDS"), with the intention of reporting these bits in
KVM_GET_SUPPORTED_CPUID, but I was unable to find a proposed patch on
the kvm list.

Opportunistically reordered the CPUID_7_0_EBX capability bits from
least to most significant.

Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220204001348.2844660-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadow

[ Upstream commit b9bed78e2fa9571b7c983b20666efa0009030c71 ]

Set vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS, a.k.a. the pending single-step
breakpoint flag, when re-injecting a #DB with RFLAGS.TF=1, and STI or
MOVSS blocking is active.  Setting the flag is necessary to make VM-Entry
consistency checks happy, as VMX has an invariant that if RFLAGS.TF is
set and STI/MOVSS blocking is true, then the previous instruction must
have been STI or MOV/POP, and therefore a single-step #DB must be pending
since the RFLAGS.TF cannot have been set by the previous instruction,
i.e. the one instruction delay after setting RFLAGS.TF must have already
expired.

Normally, the CPU sets vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS appropriately
when recording guest state as part of a VM-Exit, but #DB VM-Exits
intentionally do not treat the #DB as "guest state" as interception of
the #DB effectively makes the #DB host-owned, thus KVM needs to manually
set PENDING_DBG.BS when forwarding/re-injecting the #DB to the guest.

Note, although this bug can be triggered by guest userspace, doing so
requires IOPL=3, and guest userspace running with IOPL=3 has full access
to all I/O ports (from the guest's perspective) and can crash/reboot the
guest any number of ways.  IOPL=3 is required because STI blocking kicks
in if and only if RFLAGS.IF is toggled 0=>1, and if CPL>IOPL, STI either
takes a #GP or modifies RFLAGS.VIF, not RFLAGS.IF.

MOVSS blocking can be initiated by userspace, but can be coincident with
a #DB if and only if DR7.GD=1 (General Detect enabled) and a MOV DR is
executed in the MOVSS shadow.  MOV DR #GPs at CPL>0, thus MOVSS blocking
is problematic only for CPL0 (and only if the guest is crazy enough to
access a DR in a MOVSS shadow).  All other sources of #DBs are either
suppressed by MOVSS blocking (single-step, code fetch, data, and I/O),
are mutually exclusive with MOVSS blocking (T-bit task switch), or are
already handled by KVM (ICEBP, a.k.a. INT1).

This bug was originally found by running tests[1] created for XSA-308[2].
Note that Xen's userspace test emits ICEBP in the MOVSS shadow, which is
presumably why the Xen bug was deemed to be an exploitable DOS from guest
userspace.  KVM already handles ICEBP by skipping the ICEBP instruction
and thus clears MOVSS blocking as a side effect of its "emulation".

[1] http://xenbits.xenproject.org/docs/xtf/xsa-308_2main_8c_source.html
[2] https://xenbits.xen.org/xsa/advisory-308.html

Reported-by: David Woodhouse <dwmw2@infradead.org>
Reported-by: Alexander Graf <graf@amazon.de>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220120000624.655815-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: SVM: Don't kill SEV guest if SMAP erratum triggers in usermode

[ Upstream commit cdf85e0c5dc766fc7fc779466280e454a6d04f87 ]

Inject a #GP instead of synthesizing triple fault to try to avoid killing
the guest if emulation of an SEV guest fails due to encountering the SMAP
erratum.  The injected #GP may still be fatal to the guest, e.g. if the
userspace process is providing critical functionality, but KVM should
make every attempt to keep the guest alive.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS

[ Upstream commit f80ae0ef089a09e8c18da43a382c3caac9a424a7 ]

Similar to MSR_IA32_VMX_EXIT_CTLS/MSR_IA32_VMX_TRUE_EXIT_CTLS,
MSR_IA32_VMX_ENTRY_CTLS/MSR_IA32_VMX_TRUE_ENTRY_CTLS pair,
MSR_IA32_VMX_TRUE_PINBASED_CTLS needs to be filtered the same way
MSR_IA32_VMX_PINBASED_CTLS is currently filtered as guests may solely rely
on 'true' MSR data.

Note, none of the currently existing Windows/Hyper-V versions are known
to stumble upon the unfiltered MSR_IA32_VMX_TRUE_PINBASED_CTLS, the change
is aimed at making the filtering future proof.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER

[ Upstream commit 7a601e2cf61558dfd534a9ecaad09f5853ad8204 ]

Enlightened VMCS v1 doesn't have VMX_PREEMPTION_TIMER_VALUE field,
PIN_BASED_VMX_PREEMPTION_TIMER is also filtered out already so it makes
sense to filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER too.

Note, none of the currently existing Windows/Hyper-V versions are known
to enable 'save VMX-preemption timer value' when eVMCS is in use, the
change is aimed at making the filtering future proof.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: eventfd: Fix false positive RCU usage warning

[ Upstream commit 6a0c61703e3a5d67845a4b275e1d9d7bc1b5aad7 ]

Fix the following false positive warning:
 =============================
 WARNING: suspicious RCU usage
 5.16.0-rc4+ #57 Not tainted
 -----------------------------
 arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 3 locks held by fc_vcpu 0/330:
  #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm]
  #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm]
  #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm]

 stack backtrace:
 CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x44/0x57
  kvm_notify_acked_gsi+0x6b/0x70 [kvm]
  kvm_notify_acked_irq+0x8d/0x180 [kvm]
  kvm_ioapic_update_eoi+0x92/0x240 [kvm]
  kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm]
  handle_apic_eoi_induced+0x3d/0x60 [kvm_intel]
  vmx_handle_exit+0x19c/0x6a0 [kvm_intel]
  vcpu_enter_guest+0x66e/0x1860 [kvm]
  kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm]
  kvm_vcpu_ioctl+0x38a/0x6f0 [kvm]
  __x64_sys_ioctl+0x89/0xc0
  do_syscall_64+0x3a/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu),
kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact,
kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it
a false positive warning. So use hlist_for_each_entry_srcu() instead of
hlist_for_each_entry_rcu().

Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()

[ Upstream commit 9e0db41e7a0b6f1271cbcfb16dbf5b8641b4e440 ]

When readl_poll_timeout() timeout, we'd better directly use its return
value.

Before this patch:
[    2.145528] dwmac-sun8i: probe of 4500000.ethernet failed with error -14

After this patch:
[    2.138520] dwmac-sun8i: probe of 4500000.ethernet failed with error -110

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Fix build error due to PTR used in more places

[ Upstream commit fa62f39dc7e25fc16371b958ac59b9a6fd260bea ]

Use PTR_WD instead of PTR to avoid clashes with other parts.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs

[ Upstream commit 25e58af4be412d59e056da65cc1cefbd89185bd2 ]

The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming
compliance to a standards version where reporting one is required.

Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a
second such SSDs in a system.

Signed-off-by: Zheng Wu <wu.zheng@intel.com>
Signed-off-by: Ye Jinhe <jinhe.ye@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: Always wake the parent event

[ Upstream commit 961c39121759ad09a89598ec4ccdd34ae0468a19 ]

When using per-process mode and event inheritance is set to true,
forked processes will create a new perf events via inherit_event() ->
perf_event_alloc(). But these events will not have ring buffers
assigned to them. Any call to wakeup will be dropped if it's called on
an event with no ring buffer assigned because that's the object that
holds the wakeup list.

If the child event is disabled due to a call to
perf_aux_output_begin() or perf_aux_output_end(), the wakeup is
dropped leaving userspace hanging forever on the poll.

Normally the event is explicitly re-enabled by userspace after it
wakes up to read the aux data, but in this case it does not get woken
up so the event remains disabled.

This can be reproduced when using Arm SPE and 'stress' which forks once
before running the workload. By looking at the list of aux buffers read,
it's apparent that they stop after the fork:

  perf record -e arm_spe// -vvv -- stress -c 1

With this patch applied they continue to be printed. This behaviour
doesn't happen when using systemwide or per-cpu mode.

Reported-by: Ruben Ayrapetyan <Ruben.Ayrapetyan@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211206113840.130802-2-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend

[ Upstream commit ac55d163855924aa5af9f1560977da8f346963c8 ]

Calling dwc2_hsotg_ep_disable on ep0 (in/out) will lead to the following
logs before returning -EINVAL:
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0

To avoid these two logs while suspending, start disabling the endpoint
from the index 1, as done in dwc2_hsotg_udc_stop:

/* all endpoints should be shutdown */
for (ep = 1; ep < hsotg->num_of_eps; ep++) {
if (hsotg->eps_in[ep])
dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
if (hsotg->eps_out[ep])
dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
}

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211207130101.270314-1-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Correct MPC split policy for DCN301

[ Upstream commit ac46d93235074a6c5d280d35771c23fd8620e7d9 ]

[Why]
DCN301 has seamless boot enabled. With MPC split enabled
at the same time, system will hang.

[How]
Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have
ODM combine enabled on DCN301, pipe split is not necessary here.

Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: hibernate: Remove register_nosave_region_late()

[ Upstream commit 33569ef3c754a82010f266b7b938a66a3ccf90a4 ]

It is an unused wrapper forcing kmalloc allocation for registering
nosave regions. Also, rename __register_nosave_region() to
register_nosave_region() now that there is no need for disambiguation.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: reduce unnecessary wakeups from eee sw timer

[ Upstream commit c74ead223deb88bdf18af8c772d7ca5a9b6c3c2b ]

Currently, on EEE capable platforms, if EEE SW timer is used, the SW
timer cause 1 wakeup/s even if the TX has successfully entered EEE.
Remove this unnecessary wakeup by only calling mod_timer() if we
haven't successfully entered EEE.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: myrs: Fix crash in error case

[ Upstream commit 4db09593af0b0b4d7d4805ebb3273df51d7cc30d ]

In myrs_detect(), cs->disable_intr is NULL when privdata->hw_init() fails
with non-zero. In this case, myrs_cleanup(cs) will call a NULL ptr and
crash the kernel.

[    1.105606] myrs 0000:00:03.0: Unknown Initialization Error 5A
[    1.105872] myrs 0000:00:03.0: Failed to initialize Controller
[    1.106082] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.110774] Call Trace:
[    1.110950]  myrs_cleanup+0xe4/0x150 [myrs]
[    1.111135]  myrs_probe.cold+0x91/0x56a [myrs]
[    1.111302]  ? DAC960_GEM_intr_handler+0x1f0/0x1f0 [myrs]
[    1.111500]  local_pci_probe+0x48/0x90

Link: https://lore.kernel.org/r/20220123225717.1069538-1-ztong0001@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Treat link loss as fatal error

[ Upstream commit c99b9b2301492b665b6e51ba6c06ec362eddcd10 ]

This event is raised when link is lost as specified in UFSHCI spec and that
means communication is not possible. Thus initializing UFS interface needs
to be done.

Make UFS driver considers Link Lost as fatal in the INT_FATAL_ERRORS
mask. This will trigger a host reset whenever a link lost interrupt occurs.

Link: https://lore.kernel.org/r/1642743475-54275-1-git-send-email-kwmad.kim@samsung.com
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Use generic error code in ufshcd_set_dev_pwr_mode()

[ Upstream commit ad6c8a426446873febc98140d81d5353f8c0825b ]

The return value of ufshcd_set_dev_pwr_mode() is passed to device PM
core. However, the function currently returns a SCSI result which the PM
core doesn't understand.  This might lead to unexpected behaviors in
userland; a platform reset was observed in Android.

Use a generic error code for SSU failures.

Link: https://lore.kernel.org/r/1642743182-54098-1-git-send-email-kwmad.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix bogus FW crash for maxcpus=1

[ Upstream commit 62afb379a0fee7e9c2f9f68e1abeb85ceddf51b9 ]

According to the comment in check_fw_ready() we should not check the
IOP1_READY field in register SCRATCH_PAD_1 for 8008 or 8009 controllers.

However we check this very field in process_oq() for processing the highest
index interrupt vector. The highest interrupt vector is checked as the FW
is programmed to signal fatal errors through this irq.

Change that function to not check IOP1_READY for those mentioned
controllers, but do check ILA_READY in both cases.

The reason I assume that this was not hit earlier was because we always
allocated 64 MSI(X), and just did not pass the vector index check in
process_oq(), i.e.  the handler never ran for vector index 63.

Link: https://lore.kernel.org/r/1642508105-95432-1-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Change context reset messages to ratelimited

[ Upstream commit 64fd4af6274eb0f49d29772c228fffcf6bde1635 ]

If FCoE is not configured, libfc/libfcoe keeps on retrying FLOGI and after
3 retries driver does a context reset and tries fipvlan again.  This leads
to context reset message flooding the logs. Hence ratelimit the message to
prevent flooding the logs.

Link: https://lore.kernel.org/r/20220117135311.6256-4-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Fix refcount issue when LOGO is received during TMF

[ Upstream commit 5239ab63f17cee643bd4bf6addfedebaa7d4f41e ]

Hung task call trace was seen during LOGO processing.

[  974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued...
[  974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0
[  974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET
[  974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1.
[  974.309625] host1: rport 016900: Received LOGO request while in state Ready
[  974.309627] host1: rport 016900: Delete port
[  974.309642] host1: rport 016900: work event 3
[  974.309644] host1: rport 016900: lld callback ev 3
[  974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush.
[  974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt command success...
[  984.031088] INFO: task jbd2/dm-15-8:7645 blocked for more than 120 seconds.
[  984.031136]       Not tainted 4.18.0-305.el8.x86_64 #1

[  984.031166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  984.031209] jbd2/dm-15-8    D    0  7645      2 0x80004080
[  984.031212] Call Trace:
[  984.031222]  __schedule+0x2c4/0x700
[  984.031230]  ? unfreeze_partials.isra.83+0x16e/0x1a0
[  984.031233]  ? bit_wait_timeout+0x90/0x90
[  984.031235]  schedule+0x38/0xa0
[  984.031238]  io_schedule+0x12/0x40
[  984.031240]  bit_wait_io+0xd/0x50
[  984.031243]  __wait_on_bit+0x6c/0x80
[  984.031248]  ? free_buffer_head+0x21/0x50
[  984.031251]  out_of_line_wait_on_bit+0x91/0xb0
[  984.031257]  ? init_wait_var_entry+0x50/0x50
[  984.031268]  jbd2_journal_commit_transaction+0x112e/0x19f0 [jbd2]
[  984.031280]  kjournald2+0xbd/0x270 [jbd2]
[  984.031284]  ? finish_wait+0x80/0x80
[  984.031291]  ? commit_timeout+0x10/0x10 [jbd2]
[  984.031294]  kthread+0x116/0x130
[  984.031300]  ? kthread_flush_work_fn+0x10/0x10
[  984.031305]  ret_from_fork+0x1f/0x40

There was a ref count issue when LOGO is received during TMF. This leads to
one of the I/Os hanging with the driver. Fix the ref count.

Link: https://lore.kernel.org/r/20220117135311.6256-3-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Add stag_work to all the vports

[ Upstream commit b70a99fd13282d7885f69bf1372e28b7506a1613 ]

Call trace seen when creating NPIV ports, only 32 out of 64 show online.
stag work was not initialized for vport, hence initialize the stag work.

WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80
CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE    --------- --
 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021
Workqueue: events fc_lport_timeout [libfc]
RIP: 0010:__queue_delayed_work+0x68/0x80
Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81
f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb
c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23
RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006
RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002
RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788
RBP: ffff8d2e31380de0 R08: 0000000000002000 R09: ffff8d2e31383750
R10: ffffffffc0c957e0 R11: ffff8d2624800000 R12: ffff8d2e31380a58
R13: ffff8d2d915eb000 R14: ffff8d25c499b5c0 R15: ffff8d2e31380e18
FS:  0000000000000000(0000) GS:ffff8d2d1fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055fd0484b8b8 CR3: 00000008ffc10006 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
  queue_delayed_work_on+0x36/0x40
  qedf_elsct_send+0x57/0x60 [qedf]
  fc_lport_enter_flogi+0x90/0xc0 [libfc]
  fc_lport_timeout+0xb7/0x140 [libfc]
  process_one_work+0x1a7/0x360
  ? create_worker+0x1a0/0x1a0
  worker_thread+0x30/0x390
  ? create_worker+0x1a0/0x1a0
  kthread+0x116/0x130
  ? kthread_flush_work_fn+0x10/0x10
  ret_from_fork+0x35/0x40
 ---[ end trace 008f00f722f2c2ff ]--

Initialize stag work for all the vports.

Link: https://lore.kernel.org/r/20220117135311.6256-2-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()

[ Upstream commit a65b32748f4566f986ba2495a8236c141fa42a26 ]

devm_kstrdup() returns pointer to allocated string on success, NULL on
failure. So it is better to check the return value of it.

Link: https://lore.kernel.org/r/tencent_4257E15D4A94FF9020DDCC4BB9B21C041408@qq.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: iscsi: Make sure the np under each tpg is unique

[ Upstream commit a861790afaa8b6369eee8a88c5d5d73f5799c0c6 ]

iscsit_tpg_check_network_portal() has nested for_each loops and is supposed
to return true when a match is found. However, the tpg loop will still
continue after existing the tpg_np loop. If this tpg_np is not the last the
match value will be changed.

Break the outer loop after finding a match and make sure the np under each
tpg is unique.

Link: https://lore.kernel.org/r/20220111054742.19582-1-mingzhe.zou@easystack.cn
Signed-off-by: ZouMingzhe <mingzhe.zou@easystack.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fixmap: Fix VM debug warning on unmap

[ Upstream commit aec982603aa8cc0a21143681feb5f60ecc69d718 ]

Unmapping a fixmap entry is done by calling __set_fixmap()
with FIXMAP_PAGE_CLEAR as flags.

Today, powerpc __set_fixmap() calls map_kernel_page().

map_kernel_page() is not happy when called a second time
for the same page.

WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/pgtable.c:194 set_pte_at+0xc/0x1e8
CPU: 0 PID: 1 Comm: swapper Not tainted 5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty #682
NIP:  c0017cd4 LR: c00187f0 CTR: 00000010
REGS: e1011d50 TRAP: 0700   Not tainted  (5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty)
MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 42000208  XER: 00000000

GPR00: c0165fec e1011e10 c14c0000 c0ee2550 ff800000 c0f3d000 00000000 c001686c
GPR08: 00001000 b00045a9 00000001 c0f58460 c0f50000 00000000 c0007e10 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
GPR24: 00000000 00000000 c0ee2550 00000000 c0f57000 00000ff8 00000000 ff800000
NIP [c0017cd4] set_pte_at+0xc/0x1e8
LR [c00187f0] map_kernel_page+0x9c/0x100
Call Trace:
[e1011e10] [c0736c68] vsnprintf+0x358/0x6c8 (unreliable)
[e1011e30] [c0165fec] __set_fixmap+0x30/0x44
[e1011e40] [c0c13bdc] early_iounmap+0x11c/0x170
[e1011e70] [c0c06cb0] ioremap_legacy_serial_console+0x88/0xc0
[e1011e90] [c0c03634] do_one_initcall+0x80/0x178
[e1011ef0] [c0c0385c] kernel_init_freeable+0xb4/0x250
[e1011f20] [c0007e34] kernel_init+0x24/0x140
[e1011f30] [c0016268] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
7fe3fb78 48019689 80010014 7c630034 83e1000c 5463d97e 7c0803a6 38210010
4e800020 81250000 712a0001 41820008 <0fe00000> 9421ffe0 93e1001c 48000030

Implement unmap_kernel_page() which clears an existing pte.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b0b752f6f6ecc60653e873f385c6f0dce4e9ab6a.1638789098.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: Clarify error message when qdisc kind is unknown

[ Upstream commit 973bf8fdd12f0e70ea351c018e68edd377a836d1 ]

When adding a tc rule with a qdisc kind that is not supported or not
compiled into the kernel, the kernel emits the following error: "Error:
Specified qdisc not found.". Found via tdc testing when ETS qdisc was not
compiled in and it was not obvious right away what the message meant
without looking at the kernel code.

Change the error message to be more explicit and say the qdisc kind is
unknown.

Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for the 1Netbook OneXPlayer

[ Upstream commit d3cbc6e323c9299d10c8d2e4127c77c7d05d07b1 ]

The 1Netbook OneXPlayer uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.

Signed-off-by: Raymond Jay Golo <rjgolo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113000619.90988-1-rjgolo@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: Fix deadlock on DSI device attach error

[ Upstream commit 0a3d12ab5097b1d045e693412e6b366b7e82031b ]

DSI device attach to DSI host will be done with host device's lock
held.

Un-registering host in "device attach" error path (ex: probe retry)
will result in deadlock with below call trace and non operational
DSI display.

Startup Call trace:
[   35.043036]  rt_mutex_slowlock.constprop.21+0x184/0x1b8
[   35.043048]  mutex_lock_nested+0x7c/0xc8
[   35.043060]  device_del+0x4c/0x3e8
[   35.043075]  device_unregister+0x20/0x40
[   35.043082]  mipi_dsi_remove_device_fn+0x18/0x28
[   35.043093]  device_for_each_child+0x68/0xb0
[   35.043105]  mipi_dsi_host_unregister+0x40/0x90
[   35.043115]  vc4_dsi_host_attach+0xf0/0x120 [vc4]
[   35.043199]  mipi_dsi_attach+0x30/0x48
[   35.043209]  tc358762_probe+0x128/0x164 [tc358762]
[   35.043225]  mipi_dsi_drv_probe+0x28/0x38
[   35.043234]  really_probe+0xc0/0x318
[   35.043244]  __driver_probe_device+0x80/0xe8
[   35.043254]  driver_probe_device+0xb8/0x118
[   35.043263]  __device_attach_driver+0x98/0xe8
[   35.043273]  bus_for_each_drv+0x84/0xd8
[   35.043281]  __device_attach+0xf0/0x150
[   35.043290]  device_initial_probe+0x1c/0x28
[   35.043300]  bus_probe_device+0xa4/0xb0
[   35.043308]  deferred_probe_work_func+0xa0/0xe0
[   35.043318]  process_one_work+0x254/0x700
[   35.043330]  worker_thread+0x4c/0x448
[   35.043339]  kthread+0x19c/0x1a8
[   35.043348]  ret_from_fork+0x10/0x20

Shutdown Call trace:
[  365.565417] Call trace:
[  365.565423]  __switch_to+0x148/0x200
[  365.565452]  __schedule+0x340/0x9c8
[  365.565467]  schedule+0x48/0x110
[  365.565479]  schedule_timeout+0x3b0/0x448
[  365.565496]  wait_for_completion+0xac/0x138
[  365.565509]  __flush_work+0x218/0x4e0
[  365.565523]  flush_work+0x1c/0x28
[  365.565536]  wait_for_device_probe+0x68/0x158
[  365.565550]  device_shutdown+0x24/0x348
[  365.565561]  kernel_restart_prepare+0x40/0x50
[  365.565578]  kernel_restart+0x20/0x70
[  365.565591]  __do_sys_reboot+0x10c/0x220
[  365.565605]  __arm64_sys_reboot+0x2c/0x38
[  365.565619]  invoke_syscall+0x4c/0x110
[  365.565634]  el0_svc_common.constprop.3+0xfc/0x120
[  365.565648]  do_el0_svc+0x2c/0x90
[  365.565661]  el0_svc+0x4c/0xf0
[  365.565671]  el0t_64_sync_handler+0x90/0xb8
[  365.565682]  el0t_64_sync+0x180/0x184

Signed-off-by: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118005127.29015-1-treasure4paddy@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched: Avoid double preemption in __cond_resched_*lock*()

[ Upstream commit 7e406d1ff39b8ee574036418a5043c86723170cf ]

For PREEMPT/DYNAMIC_PREEMPT the *_unlock() will already trigger a
preemption, no point in then calling preempt_schedule_common()
*again*.

Use _cond_resched() instead, since this is a NOP for the preemptible
configs while it provide a preemption point for the others.

Reported-by: xuhaifeng <xuhaifeng@oppo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YcGnvDEYBwOiV0cR@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/perf: Avoid warning for Arch LBR without XSAVE

[ Upstream commit 8c16dc047b5dd8f7b3bf4584fa75733ea0dde7dc ]

Some hypervisors support Arch LBR, but without the LBR XSAVE support.
The current Arch LBR init code prints a warning when the xsave size (0) is
unexpected. Avoid printing the warning for the "no LBR XSAVE" case.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211215204029.150686-1-ak@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/rapl: fix AMD event handling

[ Upstream commit 0036fb00a756a2f6e360d44e2e3d2200a8afbc9b ]

The RAPL events exposed under /sys/devices/power/events should only reflect
what the underlying hardware actually support. This is how it works on Intel
RAPL and Intel core/uncore PMUs in general.
But on AMD, this was not the case. All possible RAPL events were advertised.

This is what it showed on an AMD Fam17h:
$ ls /sys/devices/power/events/
energy-cores        energy-gpu          energy-pkg          energy-psys
energy-ram          energy-cores.scale  energy-gpu.scale    energy-pkg.scale
energy-psys.scale   energy-ram.scale    energy-cores.unit   energy-gpu.unit
energy-pkg.unit     energy-psys.unit    energy-ram.unit

Yet, on AMD Fam17h, only energy-pkg is supported.

This patch fixes the problem. Given the way perf_msr_probe() works, the
amd_rapl_msrs[] table has to have all entries filled out and in particular
the group field, otherwise perf_msr_probe() defaults to making the event
visible.

With the patch applied, the kernel now only shows was is actually supported:

$ ls /sys/devices/power/events/
energy-pkg  energy-pkg.scale  energy-pkg.unit

The patch also uses the RAPL_MSR_MASK because only the 32-bits LSB of the
RAPL counters are relevant when reading power consumption.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220105185659.643355-1-eranian@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/realtek-rtl: Service all pending interrupts

[ Upstream commit 960dd884ddf5621ae6284cd3a42724500a97ae4c ]

Instead of only servicing the lowest pending interrupt line, make sure
all pending SoC interrupts are serviced before exiting the chained
handler. This adds a small overhead if only one interrupt is pending,
but should prevent rapid re-triggering of the handler.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/5082ad3cb8b4eedf55075561b93eff6570299fe1.1641739718.git.sander@svanheule.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunrpc: Fix potential race conditions in rpc_sysfs_xprt_state_change()

[ Upstream commit 1a48db3fef499f615b56093947ec4b0d3d8e3021 ]

We need to use test_and_set_bit() when changing xprt state flags to
avoid potentially getting xps->xps_nactive out of sync.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change

[ Upstream commit 776d794f28c95051bc70405a7b1fa40115658a18 ]

The refcount leak issues take place in an error handling path. When the
3rd argument buf doesn't match with "offline", "online" or "remove", the
function simply returns -EINVAL and forgets to decrease the reference
count of a rpc_xprt object and a rpc_xprt_switch object increased by
rpc_sysfs_xprt_kobj_get_xprt() and
rpc_sysfs_xprt_kobj_get_xprt_switch(), causing reference count leaks of
both unused objects.

Fix this issue by jumping to the error handling path labelled with
out_put when buf matches none of "offline", "online" or "remove".

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC allow for unspecified transport time in rpc_clnt_add_xprt

[ Upstream commit b8a09619a56334414cbd7f935a0796240d0cc07e ]

If the supplied argument doesn't specify the transport type, use the
type of the existing rpc clnt and its existing transport.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 handle port presence in fs_location server string

[ Upstream commit a8d54baba7c65db2d3278873def61f8d3753d766 ]

An fs_location attribute returns a string that can be ipv4, ipv6,
or DNS name. An ip location can have a port appended to it and if
no port is present a default port needs to be set. If rpc_pton()
fails to parse, try calling rpc_uaddr2socaddr() that can convert
an universal address.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 expose nfs_parse_server_name function

[ Upstream commit f5b27cc6761e27ee6387a24df1a99ca77b360fea ]

Make nfs_parse_server_name available outside of nfs4namespace.c.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1 query for fs_location attr on a new file system

[ Upstream commit 1976b2b31462151403c9fc110204fcc2a77bdfd1 ]

Query the server for other possible trunkable locations for a given
file system on a 4.1+ mount.

v2:
-- added missing static to nfs4_discover_trunking,
reported by the kernel test robot

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 store server support for fs_location attribute

[ Upstream commit 8a59bb93b7e3cca389af44781a429ac12ac49be6 ]

Define and store if server returns it supports fs_locations attribute
as a capability.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 remove zero number of fs_locations entries error check

[ Upstream commit 90e12a3191040bd3854d3e236c35921e4e92a044 ]

Remove the check for the zero length fs_locations reply in the
xdr decoding, and instead check for that in the migration code.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>