Tony Dinh [Fri, 30 Jul 2021 03:02:43 +0000 (20:02 -0700)]
arm: kirkwood: GoFlex Home: Use Ethernet PHY name and address from device tree
In DM Ethernet, the old "egiga0" name is no longer valid,
so replace these with Ethernet PHY names from device tree. Also, read
Ethernet PHY address from device tree.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tony Dinh [Fri, 30 Jul 2021 03:02:42 +0000 (20:02 -0700)]
arm: kirkwood: GoFlex Home: Add DM SATA configs
Enable DM SATA in board file.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tony Dinh [Fri, 30 Jul 2021 03:02:41 +0000 (20:02 -0700)]
arm: kirkwood: GoFlex Home: Add DM Ethernet, remove IDE, and add DM SATA configs
Add DM_ETH, SATA_MV and associated configs to goflexhome_defconfig.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tom Rini [Tue, 10 Aug 2021 19:08:46 +0000 (15:08 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 9 Aug 2021 13:27:26 +0000 (09:27 -0400)]
Merge tag 'u-boot-imx-
20210809' of https://source.denx.de/u-boot/custodians/u-boot-imx
u-boot-imx-
20210809
- new SOC: add support for imx8ulp
- Toradex fixes for colibri (vf / imx6 / imx7 / imx8x)
- convert to DM for mx28evk
- Fixes for Gateworks ventana boards
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
Tom Rini [Mon, 9 Aug 2021 13:27:06 +0000 (09:27 -0400)]
Merge tag 'dm-pull-8aug21' of https://source.denx.de/u-boot/custodians/u-boot-dm
Use log subsystem for dm_warn()
Various minor bug fixes
Peng Fan [Sat, 7 Aug 2021 08:21:34 +0000 (16:21 +0800)]
imx: cmd: use struct cmd_tbl
cmd_tbl_t is removed, need use struct cmd_tbl
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:01:13 +0000 (16:01 +0800)]
arm: imx: add i.MX8ULP EVK support
Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART
Log as below: I would keep some debug info for now, and after we move
to be stable and production launch, we could drop that.
U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800)
Normal Boot
upower_init: soc_id=48
upower_init: version:11.11.6
upower_init: start uPower RAM service
user_upwr_rdy_callb: soc=b
user_upwr_rdy_callb: RAM version:12.6
Turn on switches ok
Turn on memories ok
Clear DDR retention ok
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F0 frequency.
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F2 frequency.
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F2 frequency.
complete
De-Skew PLL is locked and ready
WDT: Not found!
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0
Load image from 0x3a800 by ROM_API
NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94
NOTICE: BL31: Built : 01:56:58, Jun 29 2021
NOTICE: upower_init: start uPower RAM service
NOTICE: user_upwr_rdy_callb: soc=b
NOTICE: user_upwr_rdy_callb: RAM version:12.6
U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800)
CPU: Freescale i.MX8ULP rev1.0 at 744 MHz
Reset cause: POR
Boot mode: Single boot
Model: FSL i.MX8ULP EVK
DRAM: 2 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 2
Loading Environment from MMC... ***
Warning - bad CRC, using default environment
In: serial@
293a0000
Out: serial@
293a0000
Err: serial@
293a0000
Net:
Warning: ethernet@
29950000 (eth0) using random MAC address -
96:35:88:62:e0:44
eth0: ethernet@
29950000
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:01:12 +0000 (16:01 +0800)]
arm: dts: add i.MX8ULP dtsi
Add i.MX8ULP dtsi
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:01:11 +0000 (16:01 +0800)]
ddr: Add DDR driver for iMX8ULP
Add iMX8ULP DDR initialization driver which loads the DDR timing
parameters and executes the training procedure.
When enabling IMX8ULP_DRAM_PHY_PLL_BYPASS, using PHY PLL bypass mode
to do DDR init
Signed-off-by: Ye Li <ye.li@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:01:10 +0000 (16:01 +0800)]
imx8ulp: add upower api support
Add upower api support, this is modified from upower firmware exported
package.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:01:09 +0000 (16:01 +0800)]
imx8ulp: move struct mu_type to common header
Move struct mu_type to common header to make it reusable by upower and
S400
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:01:08 +0000 (16:01 +0800)]
imx8ulp: Add workaround for eMMC boot
When booting from boot part1/2, the image offset should be 0, but
ROM has a bug to return 0x8000. Has to workaround the issue before
ROM fix it.
Use a ROM function to know boot from emmc boot part or user part
So we can set the image offset accordingly.
Signed-off-by: Ye Li <ye.li@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:01:07 +0000 (16:01 +0800)]
imx8ulp: Use DGO_GP5 to get boot config
Since CMC1 MR0 only reflects high 16 bits boot cfg used for AP domian,
it does not connect to low 16 bits for RTD. So we can't get the correct
boot mode.
Change to use DGO_GP5 of SEC_SIM which is set by ROM.
Signed-off-by: Ye Li <ye.li@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:01:06 +0000 (16:01 +0800)]
imx8ulp: soc: correct reset cause
The CMC1 SRS reflects the current reset cause, not SSRS.
Then you could get "Reset cause: WARM-WDG" when issue reset in U-Boot.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:01:05 +0000 (16:01 +0800)]
driver: misc: imx8ulp: Add fuse driver for imx8ulp
This driver uses FSB to read some fuses, but not support program fuse.
It only works in SPL (secure mode), u-boot needs traps to ATF to
read them.
Some fuses can read from S400 API and others are from FSB.
Also support program some fuses via S400 API
Signed-off-by: Ye Li <ye.li@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:01:04 +0000 (16:01 +0800)]
arm: imx8ulp: add iomuxc support
Add i.MX8ULP iomuxc support
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:01:03 +0000 (16:01 +0800)]
arm: imx8ulp: add dummy imx_get_mac_from_fuse
Add imx_get_mac_from_fuse for enet build pass
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:01:02 +0000 (16:01 +0800)]
arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain
Configure DCNANO and MIPI_DSI to be controlled by AD for single boot
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:01:01 +0000 (16:01 +0800)]
arm: iMX8ULP: Add boot device relevant functions
Read from ROM API to get current boot device.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:01:00 +0000 (16:01 +0800)]
arm: imx8ulp: Probe the S400 MU device in arch init
Need probe the S400 MU device in arch_cpu_init_dm, so we can use
S400 API in u-boot
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:59 +0000 (16:00 +0800)]
imx8ulp: unify rdc functions
Unify rdc function to rdc.c
Update soc.c to use new rdc function
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:58 +0000 (16:00 +0800)]
arm: imx8ulp: release trdc and assign lpav from RTD to APD
Rlease LPAV from RTD to APD
Release gpu2D/3D to APD
Set TRDC MBC2 MEM1 for iomuxc0 access
Since upower depends AP/M33 SW to configure IOMUX for its PMIC i2c
and MODE pins. we have to open iomuxc0 access for A35 core (domain 7)
in single boot.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:57 +0000 (16:00 +0800)]
arm: imx8ulp: add trdc release request
Add TRDC release request, then we could configure resources to be
accessible by A35 Domain.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:56 +0000 (16:00 +0800)]
arm: imx8ulp: add rdc support
There is xrdc inside i.MX8ULP, we need to configure permission to make
sure AP non-secure world could access the resources.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:55 +0000 (16:00 +0800)]
arm: imx8ulp: release and configure XRDC at early phase
Since S400 will set the memory of SPL image to R/X. We can't write
to any data in SPL image.
1. Set the parameters save/restore only for u-boot, not for SPL. to
avoid write data.
2. Not use MU DM driver but directly call MU API to send release XRDC
to S400 at early phase.
3. Configure the SPL image memory of SRAM2 to writable (R/W/X)
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:54 +0000 (16:00 +0800)]
drivers: misc: s400_api: Update API for fuse read and write
Add API to support fuse read and write
Signed-off-by: Ye Li <ye.li@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:53 +0000 (16:00 +0800)]
drivers: misc: imx8ulp: Update S400 API for release RDC
The RDC API is updated to add a field for XRDC or TRDC
Signed-off-by: Ye Li <ye.li@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:52 +0000 (16:00 +0800)]
drivers: misc: imx8ulp: Add S400 API for image authentication
Add S400 API for image authentication
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:51 +0000 (16:00 +0800)]
drivers: misc: s400_api: Update S400_SUCCESS_IND to 0xd6
According to latest S400 API doc, the the success indicate value is
changed to 0xd6. So update the driver codes.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:50 +0000 (16:00 +0800)]
arm: imx8ulp: Update the reset vector in u-boot
Because we have set reset vector to ATF in SPL, have to set it back
to ROM for any reset in u-boot
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:49 +0000 (16:00 +0800)]
arm: imx8ulp: disable wdog3
Disable wdog3 which is configured by ROM
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:48 +0000 (16:00 +0800)]
arm: imx8ulp: Enable full L2 cache in SPL
SRAM2 is half L2 cache and default to SRAM after system boot.
To enable the full l2 cache (512KB), it needs to reset A35 to make
the change happen.
So re-implement the jump entry function in SPL:
1. configure the core0 reset vector to entry (ATF)
2. enable the L2 full cache
3. reset A35
So when core0 up, it runs into ATF. And we have 512KB L2 cache working.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:47 +0000 (16:00 +0800)]
arm: imx8ulp: soc: Change to use CMC1 to get bootcfg
CMC1 also has a MR register for bootcfg
Signed-off-by: Ye Li <ye.li@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:46 +0000 (16:00 +0800)]
drivers: mmc: fsl_esdhc_imx: support i.MX8ULP
i.MX8ULP reuse same SDHC IP as i.MX8M, so follow i.MX8M code logic.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:45 +0000 (16:00 +0800)]
arm: imx8ulp: add clock support
Add i.MX8ULP clock support
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:44 +0000 (16:00 +0800)]
driver: serial: fsl_lpuart: support i.MX8ULP
i.MX8ULP lpuart has same register layout as i.MX7ULP and i.MX8
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:43 +0000 (16:00 +0800)]
pinctrl: Add pinctrl driver for imx8ulp
Add pinctrl driver for i.MX8ULP
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:42 +0000 (16:00 +0800)]
net: fec_mxc: support i.MX8ULP
Support i.MX8ULP in fec_mxc
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Ye Li [Sat, 7 Aug 2021 08:00:41 +0000 (16:00 +0800)]
driver: misc: Add MU and S400 API to communicate with Sentinel
Add MU driver and S400 API. Need enable MISC driver to work
Signed-off-by: Ye Li <ye.li@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:40 +0000 (16:00 +0800)]
arm: imx: move container Kconfig under mach-imx
Since i.MX8 and i.MX8ULP reuse common container, so move the Kconfig
public to both.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:39 +0000 (16:00 +0800)]
arm: imx8ulp: add container support
i.MX8ULP support using ROM API to load container image,
it use same ROM API as i.MX8MN/MP, and use same container format
as i.MX8QM/QXP.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:38 +0000 (16:00 +0800)]
arm: imx: parse-container: guard included header files
Guard included sci.h with CONFIG_AHAB_BOOT to avoid build failure
for i.MX8ULP
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:37 +0000 (16:00 +0800)]
arm: imx8: Move container image header file to mach-imx
Since the container is shared among i.MX platforms, move its header file
to mach-imx
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Sat, 7 Aug 2021 08:00:36 +0000 (16:00 +0800)]
arm: imx8: Move container parser and image to mach-imx common folder
Since we will re-use the container parser on imx8ulp, move the codes
to mach-imx
Signed-off-by: Ye Li <ye.li@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:35 +0000 (16:00 +0800)]
arm: imx: basic i.MX8ULP support
Add basic i.MX8ULP support
For the MMU part, Using a simple way the calculate the MMU size to avoid
default heavy calcaulation. And align address and size in the table
settings to 2MB or 4GB as much as possible. So we can reduce the 4K page
allocations in MMU table which will spends much time in create the
page table
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:34 +0000 (16:00 +0800)]
imx: imx8ulp: add get reset cause
Add get reset cause function to show what triggerred reset.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:33 +0000 (16:00 +0800)]
arm: imx8ulp: support print cpu info
Support print cpu info. the clock function has not been added, it will
be added in following patches.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:32 +0000 (16:00 +0800)]
arm: imx: sys_proto: move boot mode define to common header
These defines could be reused by i.MX8ULP, so move them
to common header.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:31 +0000 (16:00 +0800)]
arm: imx: add i.MX8ULP cpu type and helper
Add i.MX8ULP cpu type and helpers.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 7 Aug 2021 08:00:30 +0000 (16:00 +0800)]
arm: imx: add i.MX8ULP basic Kconfig option
Add i.MX8ULP related basic Kconfig option, which will be used later.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tim Harvey [Tue, 27 Jul 2021 22:19:40 +0000 (15:19 -0700)]
board: gateworks: venice: add board model to dt
Add the specific board model from EEPROM config to the device-tree to
make it easier to access from Linux userspace.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Tue, 27 Jul 2021 22:19:33 +0000 (15:19 -0700)]
configs: imx8mm_venice_defconfig: remove unused SPL features
remove unused SPL features to shink the size of the SPL which
otherwise would no longer fit into IMX8M Mini OCRAM.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Fabio Estevam [Thu, 18 Feb 2021 02:39:28 +0000 (23:39 -0300)]
mx28evk: Convert to driver model
Make the conversion to driver model as it is mandatory.
Successfully tested booting Linux from the SD card.
Dropped support for networking and splash screen as these need
to be properly converted to DM and tested.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Sebastian Reichel [Wed, 4 Aug 2021 16:22:54 +0000 (18:22 +0200)]
board: ge: bx50v3: Add PCIe reset to DT
Add PCIe reset gpio to the Bx50v3 devicetree and get get rid of
CONFIG_PCIE_IMX_PERST_GPIO.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fabio Estevam [Fri, 30 Jul 2021 00:24:58 +0000 (21:24 -0300)]
mx7dsabresd: Select CONFIG_IMX_HAB
Select CONFIG_IMX_HAB so that the "hab_status" command
becomes available, which is useful for checking if the
chip has been correctly setup to run in secure boot mode.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tim Harvey [Tue, 27 Jul 2021 22:19:41 +0000 (15:19 -0700)]
board: gateworks: venice: add imx8mm-gw7902 support
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller
- LTE CAT M1 modem
- USB 2.0 HUB
- M.2 Socket with USB2.0, PCIe, and dual-SIM
- IMX8M FEC
- PCIe based GbE
- RS232/RS485/RS422 serial transceiver
- GPS
- CAN bus
- WiFi / Bluetooth
- MIPI header (DSI/CSI/GPIO/PWM/I2S)
- PMIC
Do the following to add support for it:
- add dts
- add PMIC config
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Tue, 27 Jul 2021 22:19:39 +0000 (15:19 -0700)]
board: gateworks: venice: add board model/serial# to env
Add board model/serial# strings to env. Move the creation of the strings
to gsc_read() and the display of the info into gsc_info() so they are
available to U-Boot proper.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Tue, 27 Jul 2021 22:19:38 +0000 (15:19 -0700)]
board: gateworks: venice: use bus numbers vs names
replace looking up i2c bus name by bus number and define bus numbers and
eeprom address with #defines.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Tue, 27 Jul 2021 22:19:37 +0000 (15:19 -0700)]
board: gateworks: venice: get mem size from dt
Get mem size from dt which SPL updated per EEPROM config.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Tue, 27 Jul 2021 22:19:36 +0000 (15:19 -0700)]
arm: dts: imx8mm-venice-gw7901: use common u-boot dtsi
Use the common imx8mm-u-boot.dtsi
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Tue, 27 Jul 2021 22:19:35 +0000 (15:19 -0700)]
arm: dts: imx8mm-venice-gw700x: fix fifo-depth phy props
Replace the deprecated 'tx-fifo-depth' and 'rx-fifo-depth' properties
not supported by U-Boot drivers/net/phy/dp83867.c with the proper
'ti,fifo-depth' property.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Tue, 27 Jul 2021 22:19:34 +0000 (15:19 -0700)]
arm: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS
The GW71xx has a USB Type-C connector with USB 2.0 signaling. GPIO1_12
is the power-enable to the TPS25821 Source controller and power switch
responsible for monitoring the CC pins and enabling VBUS. Therefore
GPIO1_12 must always be enabled and the vbus output enable from the
IMX8MM can be ignored.
To fix USB OTG VBUS enable a pull-up on GPIO1_12 to always power the
TPS25821 and change the regulator output to GPIO1_10 which is
unconnected.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Fabio Estevam [Mon, 26 Jul 2021 19:01:48 +0000 (16:01 -0300)]
warp: Use the correct symbol for CONFIG_IMX_HAB
The intention of commit
d714a75fd4dc ("imx: replace CONFIG_SECURE_BOOT
with CONFIG_IMX_HAB") was to convert from CONFIG_SECURE_BOOT to
CONFIG_IMX_HAB, but it replaced with an extra "_" character.
Fix it by using the correct CONFIG_IMX_HAB symbol.
Fixes:
d714a75fd4dc ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:46 +0000 (10:40 -0700)]
imx: ventana: add support for GW54xx-G revision
The GW54xx-G revision has the foolowing changes:
- replaces the EOL GbE PHY with an updated part (requires an enable pin)
- replaces the EOL analog video decoder with an updated part
(requires dt prop)
- add power control to miniPCIe socket
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:45 +0000 (10:40 -0700)]
imx: ventana: add support for GW53xx-G revision
The GW53xx-G revision has the foolowing changes:
- replaces the EOL GbE PHY with an updated part (requires an enable pin)
- replaces the EOL analog video decoder with an updated part
(requires dt prop)
- add power control to miniPCIe socket
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:44 +0000 (10:40 -0700)]
imx: ventana: add GW5913 support
The GW5913 is a Single Board Computer based on the NXP i.MX6Q/DL SoC
with the following features:
- DDR3 DRAM
- NAND FLASH (256MiB or 2048MiB)
- Gateworks System Periperhal Controller
- front panel LED's
- front panel pushbutton
- Digital I/O connector (I2C/GPIO/UART)
- u-blox Zoe-M8Q GPS
- 1x RJ45 GbE
- 1x MiniPCIe socket with PCIe USB 2.0 and nanoSIM socket
- Passive PoE and wide-range DC power supply
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:43 +0000 (10:40 -0700)]
imx: ventana: add GW5912 support
The GW5912 is a Single Board Computer based on the NXP i.MX6Q/DL SoC
with the following features:
- DDR3 DRAM
- NAND FLASH (256MiB or 2048MiB)
- microSD socket
- Gateworks System Periperhal Controller
- front panel LED's
- front panel pushbutton
- RS232 connector (2x UARTs)
- CAN/RS485 connector
- Digital I/O connector (I2C/GPIO)
- SPI connector
- u-blox Zoe-M8Q GPS
- LIS2DE12 Accellerometer
- 1x FEC GbE RJ45 with 802.3at Active PoE
- 1x PCI GbE RJ45 with Passive PoE
- 5x MiniPCIe socket with PCIe/USB 2.0
- 1x MiniPCIe socket with PCIe/USB 2.0 and SIM socket
- Aux power input with wide-range DC power supply
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:42 +0000 (10:40 -0700)]
imx: ventana: add GW5910 support
The GW5910 is a Single Board Computer based on the NXP i.MX6Q/DL SoC
with the following features:
- DDR3 DRAM
- NAND FLASH (256MiB or 2048MiB)
- microSD socket
- Gateworks System Periperhal Controller
- front panel LED's
- front panel pushbutton
- RS232 connector (2x UARTs)
- Digital I/O connector (I2C/GPIO)
- SPI connector
- u-blox Zoe-M8Q GPS
- LIS2DE12 Accellerometer
- TI CC1352 ARM Cortex-M4 multiprotocol sub-1GHz / 2.4GHz wireless MCU
- On-board brcmfmac WiFi and BT module
- RGMII RJ45 GbE
- 1x MiniPCIe socket with PCIe/USB 2.0
- 1x MiniPCIe socket with USB 2.0 and nanoSIM socket
- Passive PoE and wide-range DC power supply
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:41 +0000 (10:40 -0700)]
imx: ventana: use dt for hwmon
Use dt-bindings for GSC hwmon devices.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:40 +0000 (10:40 -0700)]
imx: ventana: remove hard-coded flexcan standby pin
Flexcan pinmux is configured in kernel dt.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:39 +0000 (10:40 -0700)]
imx: ventana: remove hard-coded analog video codec enable
Analog video codec enable is configured in kernel dt.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:38 +0000 (10:40 -0700)]
imx: ventana: remove hard-coded USB OTG pinmux
pinmux is now done via dt. Add missing OTG_OC pinmux for boards that
use it.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:37 +0000 (10:40 -0700)]
imx: ventana: remove hard-coded PCI reset
PCIe reset configuration is handled via dt now.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:36 +0000 (10:40 -0700)]
imx: ventana: fix UMS support
The Gateworks Ventana boards have always had usb0=usbh1 and usb1=usbotg
because OTG is often subloaded on these boards and a bit in the EEPROM
which flagging that OTG is subloaded is used to remove the dt node via the
alias.
U-Boot DM_USB UMS requires the usb0 alias be assigned to the usbotg
so fix the usb0 alias in order for UMS to work.
Fixes
72c46327f03f: ("imx: ventana: enable dm support for USB")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:35 +0000 (10:40 -0700)]
imx: ventana: remove hard-coded USB HUBRST# gpio config
The USB HUB reset is handled via dt now.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:34 +0000 (10:40 -0700)]
imx: ventana: replace hard-coded LED config with dt based config
Use device-tree LED config instead of hard-coded board-specific config.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:33 +0000 (10:40 -0700)]
imx: ventana: remove nand field from common ventana struct
NAND fdt fixups can be performed without knowing if NAND is present.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:32 +0000 (10:40 -0700)]
imx: ventana: move wdog/uhs-i board/revision dt fixups
Move board/revision specific dt fixups for WDOG and UHS-I features
so that we can call them early for U-Boot control dt as well.
Additionally drop a deprected non-mainline dt-prop fixup regarding
HDMI input format.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Sat, 24 Jul 2021 17:40:31 +0000 (10:40 -0700)]
imx: ventana: ignore EEPROM config when checking for NAND support
EEPROM bits no longer indicate support for NAND so instead use
hard-coded value from board config struct.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Oleksandr Suvorov [Fri, 23 Jul 2021 06:39:49 +0000 (09:39 +0300)]
board: colibri_vf: fix compiling warning
This patch fixes the following compiler warning:
=============
board/toradex/colibri_vf/colibri_vf.c: In function 'ft_board_setup':
board/toradex/colibri_vf/colibri_vf.c:436:6: warning: unused variable 'ret' [-Wunused-variable]
=============
Fixes:
be3f1a56bf8 ("video: fsl_dcu_fb: add DM_VIDEO support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Ming Liu [Fri, 23 Jul 2021 06:39:48 +0000 (09:39 +0300)]
board: colibri_imx6: add board_fit_config_name_match to support FIT in SPL
Only one dtb is currently supported, so match with imx6-colibri.
Signed-off-by: Ming Liu <ming.liu@toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Oleksandr Suvorov [Fri, 23 Jul 2021 06:39:47 +0000 (09:39 +0300)]
board: colibri-imx8x: update building documentation
Update the documentation on how to build the u-boot image for
Colibri iMX8QXP, adding support of V1.0D revision of the module.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Stefan Agner [Fri, 23 Jul 2021 06:39:46 +0000 (09:39 +0300)]
board: toradex: make USB PID from config block optional
If config block support is enabled, USB gadget modes unconditionally
use Toradex Product ID as USB PID. Some applications might prefer a
different and/or static USB PID. Add a Kconfig configuration option
to descide whether to use USB PID from config block or the fallback
config option CONFIG_G_DNL_PRODUCT_NUM.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Stefan Agner [Fri, 23 Jul 2021 06:39:45 +0000 (09:39 +0300)]
board: colibri_imx7: use SDP if USB serial downloader has been used
In case USB serial downloader has been used to load U-Boot start the
serial download protocol (SDP) emulation. This allows to download
complete images such as Toradex Easy Installer over USB SDP as well.
This code uses the boot ROM provided boot information to reliably
detect USB serial downloader.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Fabio Estevam [Mon, 19 Jul 2021 20:15:14 +0000 (17:15 -0300)]
mx6cuboxi: Fix the console variable
Do not pass the console baudrate to the 'console' variable
to avoid the baudrate being passed twice when extlinux.conf
contains the standard: console=${console},${baudrate} format.
cat /proc/cmdline
root=PARTUUID=
00000000-01 rootwait rw console=ttymxc0,115200,115200
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Mon, 19 Jul 2021 20:15:13 +0000 (17:15 -0300)]
mx6cuboxi: Fix the mmc device for the rootfs
After the conversion to DM_MMC, the rootfs becomes mmc 1, so
adjust it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Simon Glass [Mon, 2 Aug 2021 13:37:54 +0000 (07:37 -0600)]
dtoc: Correct the intarray-widening test case
This case was intended to check that widening an int array with an int
does nothing. Fix it.
Reported-by: Walter Lozano <walter.lozano@collabora.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
Simon Glass [Sun, 1 Aug 2021 22:02:39 +0000 (16:02 -0600)]
patman: Avoid blank lines between tags
In some cases 'patman status' leaves a blank line between the sign-off
and the tags it collects from patchwork. Fix this and add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 1 Aug 2021 18:05:23 +0000 (12:05 -0600)]
dm: core: Don't allow uclass use before ready
At present it is possible to call uclass_get() before driver model is
inited. In fact this happens on x86 boards which use Intel FSPv1, since
mrccache_get_region() tries to get the SPI flash device very early
during init.
This has always been undefined behaviour. Previously it generally worked,
i.e. returned an error code without crashing, because gd->uclass_root_s
is zeroed and the uclass can be added despite driver model not being
ready, due to the way lists are implemented. With the change to use a
gd->uclass_root pointer, this no-longer works. For example, it causes a
hang on minnowmax.
Fix this by adding a check that driver model is ready when uclass_get() is
called. This function is called in the process of locating any device, so
it is a good place to add the check.
This fixes booting on minnowmax.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes:
8a715530bb1 ("dm: core: Allow the uclass list to move")
Patrick Delaunay [Fri, 30 Jul 2021 10:13:11 +0000 (12:13 +0200)]
dm: migrate the dm_warn to use the log macro
Migrate the dm_warn function to log macro with
LOGC_DM category and LOGL_WARNING level.
This macro allows filtering with log command and allows
output on all log backend.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jan Kiszka [Thu, 29 Jul 2021 07:22:02 +0000 (09:22 +0200)]
Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"
This reverts commit
2359fa7a87848626bcbd3399e92c657595880cd7.
While the goal is valid and there is surely unused memory in that area,
we also have a lot of crucial things still located at the top-of-memory
while running lmb_alloc_base. Such things are the page table (tlb_addr),
relocated U-Boot and the active stack. Possibly more. So this patch was
premature, we will need relocations of those things first if we want to
use the range.
Fixes booting on the IOT2050, but likely also on other boards. It got
stuck on relocating the FDT - over the relocated U-Boot code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tom Rini [Sun, 8 Aug 2021 13:08:22 +0000 (09:08 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-sh
Marek Vasut [Sun, 13 Jun 2021 20:41:09 +0000 (22:41 +0200)]
ARM: renesas: Set CONFIG_SYS_TEXT_BASE=0x0 on R-Car Gen3
Since R-Car Gen3 already enables position independent build, also set
CONFIG_SYS_TEXT_BASE=0x0 to finalize the switch. This is possible since
534f0fbd65 ("arm64: Fix relocation of env_addr if POSITION_INDEPENDENT=y")
fixed current env_get_char() crash with CONFIG_SYS_TEXT_BASE=0x0 .
This change permits us to start U-Boot from any location in DRAM instead
of specific TEXT_BASE.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut [Sun, 13 Jun 2021 20:42:26 +0000 (22:42 +0200)]
ARM: renesas: Mallocate bootparams on Gen3
The bootparams do not have to be at fixed location, they can be
dynamically mallocated instead. Make it so to get rid of another
fixed assignment.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Marek Vasut [Sun, 13 Jun 2021 20:40:45 +0000 (22:40 +0200)]
ARM: renesas: Turn on PIE for Gen3
Turn on PIE, so that the U-Boot binary can be started from any arbitrary
location in DRAM instead of a predefined fixed one. Note that this patch
is not setting SYS_TEXT_BASE=0x0 yet, since that triggers relocation bugs
in env code that are yet to be fixed.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Marek Vasut [Sun, 4 Jul 2021 14:58:09 +0000 (16:58 +0200)]
ARM: rmobile: Remove default bootargs
The bootargs in all those boards are a copy of initial example
bootargs, just remove those as they make little sense in most
configurations.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Tom Rini [Fri, 6 Aug 2021 17:46:40 +0000 (13:46 -0400)]
Merge tag 'video-2021-08-05' of https://source.denx.de/u-boot/custodians/u-boot-video
- add display driver for ST-Ericsson MCDE
- drop legacy CONFIG_VIDEO dependency for Hitachi tx18d42vm
Tom Rini [Fri, 6 Aug 2021 17:45:57 +0000 (13:45 -0400)]
Merge branch '2021-08-05-drop-almost-all-pre-dm_pci-code'
- Remove the majority of our pre-DM_PCI PCI code as DM_PCI is true in
almost all cases now.
Simon Glass [Mon, 2 Aug 2021 00:54:45 +0000 (18:54 -0600)]
pci: Drop migration method
Migration is complete. Drop the message.
Signed-off-by: Simon Glass <sjg@chromium.org>