Heinrich Schuchardt [Thu, 20 Jun 2019 13:25:48 +0000 (15:25 +0200)]
efi_loader: let the variable driver patch out the runtime
Our variable services are only provided at boottime. Therefore when
leaving boottime the variable function are replaced by dummy functions
returning EFI_UNSUPPORTED. Move this patching of the runtime table to the
variable services implementation. Executed it in ExitBootServices().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Thu, 20 Jun 2019 22:00:02 +0000 (22:00 +0000)]
efi_loader: clean up runtime detaching
The detaching of the runtime will have to move to ExitBootServices() to
encompass operating system that do not call SetVirtualAddressMap().
This patch changes the logic for the relocation of the pointers in the
runtime table such that the relocation becomes independent of the entries
in the detach list.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 29 Jun 2019 00:00:16 +0000 (02:00 +0200)]
efi_loader: remove NULL entries from runtime detach list
Some entries in the system table are set to NULL in ExitBootServices(). We
had them in the runtime detach list to avoid relocation of NULL. Let's
instead assign the pointers dynamically in efi_initialize_system_table() to
avoid the relocation entry.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Thu, 20 Jun 2019 11:52:16 +0000 (13:52 +0200)]
efi_loader: initialization of variable services
Provide an initialization routine for variable services.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Thu, 20 Jun 2019 10:13:05 +0000 (12:13 +0200)]
efi_loader: move efi_query_variable_info()
Let's keep similar things together.
Move efi_query_variable_info() to lib/efi_loader/efi_variable.c
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Wed, 3 Jul 2019 18:27:24 +0000 (20:27 +0200)]
efi_loader: remove superfluous spaces in comments
Leave only a single space after * if not aligning.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Fri, 5 Jul 2019 15:43:13 +0000 (17:43 +0200)]
test/py: error message test_efi_selftest_device_tree
Correct the error message in test_efi_selftest_device_tree().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sun, 30 Jun 2019 05:27:09 +0000 (07:27 +0200)]
efi_selftest: description of CMD_BOOTEFI_SELFTEST
The current short description has a typo. Let it stand out clear that we
provide unit tests.
Improve the description of the CMD_BOOTEFI_SELFTEST configuration option.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Heinrich Schuchardt [Fri, 5 Jul 2019 19:27:13 +0000 (21:27 +0200)]
disk: efi: buffer overflow in part_get_info_efi()
In part_get_info_efi() we use the output of print_efiname() to set
info->name[]. The size of info->name is PART_NAME_LEN = 32 but
print_efiname() returns a string with a maximum length of
PARTNAME_SZ + 1 = 37.
Use snprintf() instead of sprintf() to avoid buffer overflow.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Neil Armstrong [Thu, 4 Jul 2019 13:59:38 +0000 (15:59 +0200)]
board: amlogic: add mailing-list to MAINTAINERS
Add missing mailing-list to the amlogic boards MAINTAINERS file.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tom Rini [Thu, 4 Jul 2019 15:35:51 +0000 (11:35 -0400)]
Merge tag 'u-boot-imx-
20190704' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
Fixes for 2019.07
-----------------
- Wandboard
Fabio Estevam [Wed, 12 Jun 2019 15:34:41 +0000 (12:34 -0300)]
wandboard: README: Adjust the U-Boot proper binary name
After the conversion to DM the U-Boot proper binary name
is 'u-boot-dtb.img', so adjust it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Wed, 12 Jun 2019 15:34:40 +0000 (12:34 -0300)]
wandboard: Add FIT image support
After the transition to DM, only the mx6dl/solo wandboard
is supported.
Add FIT image support so that all the wandboard variants
can be supported, like it was prior to the DM conversion.
Successfully booted Linux on mx6q/solo/qp wandboards.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Wed, 12 Jun 2019 15:34:39 +0000 (12:34 -0300)]
wandboard: Add mmc0 alias
Add a mmc0 alias so that U-Boot proper can associate mmc0
with the boot SD card.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Wed, 12 Jun 2019 15:34:38 +0000 (12:34 -0300)]
wandboard: Import extra wandboard devicetree files
Import wandboard devicetree files so that the mx6q and mx6qp
variants can be properly supported.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Wed, 12 Jun 2019 15:34:37 +0000 (12:34 -0300)]
wandboard: Sync with devicetree files from kernel 5.1.9
Udate the wandboard devicetree files with the ones
from kernel 5.1.9.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Wed, 12 Jun 2019 15:34:36 +0000 (12:34 -0300)]
mx6: dts: Move dtbs under SoC level
Place dtbs under SoC level rather than board level.
imx6q-novena.dtb and imx6dl-wandboard-revb1.dtb were
placed under the board config option, so move them
to SoC level.
This also aligns with the kernel dts Makefile format.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Wed, 12 Jun 2019 15:34:35 +0000 (12:34 -0300)]
mx6: dts: Keep dtb entries sorted
Keep dtb entries sorted to help adding new dtbs
in an organized form.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tom Rini [Tue, 2 Jul 2019 12:18:19 +0000 (08:18 -0400)]
Merge tag 'rockchip-for-v2019.07-rc5-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- fix for atf bl31_image_info pointer
- fix for rockpro64 vdd_log init
- fix for tinker-rk3288 SPL size too big
Kever Yang [Mon, 1 Jul 2019 03:49:15 +0000 (11:49 +0800)]
rockchip: rk3288: enable TPL for tinker-board
All the config for TPL has been update, we can enable the TPL.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Mon, 1 Jul 2019 03:49:14 +0000 (11:49 +0800)]
rockchip: config: tiner-rk3288: extend CONFIG_SYS_MONITOR_LEN to 600KB
The raw u-boot.bin for tinker board has been about 450KB without
debug option, and 550KB with all debug on, and the default value is 200KB,
which is not enough for run raw u-boot.bin.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Mon, 1 Jul 2019 03:49:13 +0000 (11:49 +0800)]
rockchip: config: update config for TPL support on tinker-rk3288
We need to update TEXT BASE for TPL/SPL/U-Boot;
SPL no need relocate STACK after enable TPL, so remove it;
Don't enable pinctrl names so that SPL can get pinctrl dts;
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Mon, 1 Jul 2019 03:49:12 +0000 (11:49 +0800)]
rockchip: dts: rk3288-tinker: enable sdmmc pinctrl node in spl
rockchip pinctrl driver has update to use dts, so we need
to add the pinctrl config in SPL for sdmmc.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Mon, 1 Jul 2019 03:49:11 +0000 (11:49 +0800)]
rockchip: dts: tinker: migrate the dm-pre-reloc tag into -u-boot dts
Migrate all the "u-boot,dm-pre-reloc" tag from rk3288-tinker.dts
into rk3288-tinker-u-boot.dtsi.
When both board level and soc level '-u-boot.dtsi' files exist,
we need to include the soc level 'rk3288-u-boot.dtsi' manually.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Mon, 1 Jul 2019 03:49:10 +0000 (11:49 +0800)]
rockchip: dts: rk3288: move reloc tag into -u-boot dts
Move all the tag "u-boot,dm-pre-reloc" from rk3288.dtsi
into rk3288-u-boot.dtsi.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Tue, 2 Jul 2019 03:43:06 +0000 (11:43 +0800)]
rockchip: rk3288: add separate TPL STACK address
TPL is at SRAM while other stage is at SDRAM, so it needs
separate STACK.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Kever Yang [Tue, 2 Jul 2019 03:43:05 +0000 (11:43 +0800)]
rockchip: rk3288: enable TPL configs to chip level
More boards other than vyasa needs TPL, so enable the TPL configs
at chip level instead of board level.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Mark Kettenis [Fri, 21 Jun 2019 21:16:45 +0000 (23:16 +0200)]
rockchip: dts: rk3399: rockpro64: Provide init voltage
Add missing regulator-init-microvolt property to vdd_log regulator.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
(Rebase on latest u-boot-rockchip master)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Change-Id: I13b24fb81e8ad269d7dbb0c7b67f5f4795d2e775
Frieder Schrempf [Thu, 27 Jun 2019 07:03:16 +0000 (07:03 +0000)]
spl: atf: Fix uninitialized pointer to bl31_image_info
The pointer to struct atf_image_info in
bl31_params_mem.bl31_params.bl31_image_info is not initialized before
being dereferenced. This can cause U-Boot to crash right before jumping
to the BL31 ATF binary.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes:
bcc1726a7bdd ("spl: add support to booting with ATF")
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Shawn Guo [Mon, 17 Jun 2019 03:08:34 +0000 (11:08 +0800)]
poplar: increase SYS_MALLOC_F_LEN for DM_FLAG_PRE_RELOC support
There is a regression seen on Poplar platform, which doesn't even show
a U-Boot version banner on booting. It turns out that due to landing
of commit
3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
simple-bus driver"), we need to increase SYS_MALLOC_F_LEN from its
default size 0x400, as pre-relocation requires more memory there. Let's
increase SYS_MALLOC_F_LEN to 0x4000 to fix the regression.
Thanks to Andreas Färber <afaerber@suse.de> for reporting, and Bin Meng
<bmeng.cn@gmail.com> for trouble shooting.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Tom Rini [Mon, 1 Jul 2019 11:31:26 +0000 (07:31 -0400)]
Merge tag 'u-boot-atmel-fixes-2019.07-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel
Second set of u-boot-atmel fixes for 2019.07 cycle
Tom Rini [Sat, 29 Jun 2019 16:09:23 +0000 (12:09 -0400)]
Merge tag 'uniphier-v2019.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier
UniPhier SoC updates for v2019.07
- Add SPI pin-mux data for pinctrl driver
- Remove unused code
- Trivial bug-fix and clean-up
Tom Rini [Sat, 29 Jun 2019 13:58:08 +0000 (09:58 -0400)]
Merge tag 'efi-2019-07-rc5-4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for v2019.07-rc5 (4)
The definition of an unimplemented function is corrected.
Masahiro Yamada [Fri, 28 Jun 2019 17:38:06 +0000 (02:38 +0900)]
ARM: uniphier: move sg_set_{pinsel, iectrl} to more relevant places
Move the sg_set_pinsel macro to arch/arm/mach-uniphier/arm32/debug_ll.S
since it is not used anywhere else.
Move the C functions sg_set_{pinsel,iectrl} to debug-uart.c since they
are not used anywhere else.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 28 Jun 2019 17:38:05 +0000 (02:38 +0900)]
ARM: uniphier: remove unused init code for CONFIG_DEBUG_UART
debug_uart_init() is called from spl_board_init(), which is only
compiled for SPL. For U-boot proper, _debug_uart_init() is unreachable,
so dropped by the dead code elimination.
Now that 64-bit SoCs of this SoC family no longer support SPL,
debug-uart-ld20.c is never compiled.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 28 Jun 2019 17:38:04 +0000 (02:38 +0900)]
ARM: uniphier: include <linux/io.h> from dram_init.c
This file calls readl(), so needs to include <linux/io.h>.
Currently, it relies on someone else including it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 28 Jun 2019 17:38:03 +0000 (02:38 +0900)]
ARM: uniphier: remove unused sg_set_iectrl_range()
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 28 Jun 2019 17:38:02 +0000 (02:38 +0900)]
ARM: uniphier: remove unused SC_DPLLOSCCTRL
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 28 Jun 2019 17:38:01 +0000 (02:38 +0900)]
ARM: uniphier: fix build error for CONFIG_DEBUG_LL=y
Commit
e27d6c7d328c ("ARM: uniphier: simplify SoC ID get function")
accidentally removed the macros needed to compile debug_ll.S
Revive them.
Fixes:
e27d6c7d328c ("ARM: uniphier: simplify SoC ID get function")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kunihiko Hayashi [Tue, 11 Jun 2019 01:06:13 +0000 (10:06 +0900)]
pinctrl: uniphier: Add SPI pin-mux settings
Add pin-mux settings for SPI controller.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Heinrich Schuchardt [Sat, 29 Jun 2019 01:51:36 +0000 (03:51 +0200)]
efi_loader: correct signature of ConvertPointer()
ConvertPointer() must be EFIAPI. The first parameter should be of type
efi_uint_t. Use the same parameter name as the UEFI specification.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tom Rini [Fri, 28 Jun 2019 12:00:22 +0000 (08:00 -0400)]
Merge tag 'u-boot-imx-
20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
Fixes for 2019.07
- menlo board
- allow SDB on Sabre
- HAB for mx6sl
- apalis board
Tom Rini [Fri, 28 Jun 2019 11:59:38 +0000 (07:59 -0400)]
Merge tag 'u-boot-stm32-
20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm
STM32 MCU fixes/cleanup:
- Fix SPL console for STM32F769 Discovery
- Fix Memory Protection Unit size for STM32F4 series
- Cleanup DT for STM32F746 Discovery
Patrice Chotard [Tue, 25 Jun 2019 11:24:03 +0000 (13:24 +0200)]
mach-stm32: Fix MPU region size dedicated to SDRAM for STM32F4
The MPU region dedicated for SDRAM for STM32F4 SoCs family
was set to 16MB, but STM32F429 Evaluation board have 32MB of SDRAM.
When kernel starts, only first 16MB of SDRAM are configured with XN
(eXecute Never) bit disabled, whereas kernel is using 32MB.
To avoid such situation in the future, extend this MPU region to 512MB
as for STM32F7/H7.
It fixes the following user land exception on STM32F429 Evaluation
board :
[ 1.713002] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.722605] devtmpfs: mounted
[ 1.733057] Freeing unused kernel memory: 72K
[ 1.737622] This architecture does not have kernel memory protection.
[ 1.744070] Run /sbin/init as init process
[ 1.906850]
[ 1.906850] Unhandled exception: IPSR =
00000004 LR =
fffffffd
[ 1.914282] CPU: 0 PID: 1 Comm: init Not tainted 5.1.0-00002-gcf9ca5719954 #6
[ 1.921433] Hardware name: STM32 (Device Tree Support)
[ 1.926601] PC is at 0x1a00b64
[ 1.929642] LR is at (null)
[ 1.932669] pc : [<
01a00b64>] lr : [<
00000000>] psr:
01000000
[ 1.938993] sp :
01a5cfb0 ip :
00000000 fp :
00000000
[ 1.944269] r10:
01a43b00 r9 :
00000000 r8 :
00000000
[ 1.949564] r7 :
00000000 r6 :
00000000 r5 :
00000000 r4 :
00000000
[ 1.956168] r3 :
00000000 r2 :
00000000 r1 :
00000000 r0 :
00000000
[ 1.962701] xPSR:
01000000
[ 1.965506] CPU: 0 PID: 1 Comm: init Not tainted 5.1.0-00002-gcf9ca5719954 #6
[ 1.972658] Hardware name: STM32 (Device Tree Support)
[ 1.978132] [<
0000c009>] (unwind_backtrace) from [<
0000b24f>] (show_stack+0xb/0xc)
[ 1.986024] [<
0000b24f>] (show_stack) from [<
0000b947>] (__invalid_entry+0x4b/0x4c)
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Patrice Chotard [Tue, 25 Jun 2019 08:06:06 +0000 (10:06 +0200)]
ARM: dts: stm32: Remove useless u-boot, dm-pre-reloc in stm32f746-disco-u-boot.dtsi
As in stm32f7-u-boot.dtsi these nodes already have "u-bootdm-pre-reloc"
property, no need to add them again in stm32f746-disco-u-boot.dtsi.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Patrice Chotard [Tue, 25 Jun 2019 08:06:05 +0000 (10:06 +0200)]
ARM: dts: stm32: Add u-boot, dm-pre-reloc for usart1_pins_a for stm32f769-disco
This allow to get console output in SPL for stm32f769-disco.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Igor Opaniuk [Mon, 24 Jun 2019 08:39:14 +0000 (11:39 +0300)]
apalis_imx6: increase phy autoneg timeout
Default value (4000ms) of PHY_ANEG_TIMEOUT for Micrel KSZ9031 contoller
isn't sufficient to finish auto-negotiation, which sometimes leads to
timeout errors:
Apalis iMX6 # dhcp
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
Increase the auto-negotiation time-out to 15000ms.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Marek Vasut [Sun, 9 Jun 2019 16:46:46 +0000 (18:46 +0200)]
ARM: imx: m53menlo: Convert to DM VIDEO
Enable DM Video support on iMX53 M53Menlo and fix minor details
to restore previous behavior of the system.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Sun, 9 Jun 2019 16:46:44 +0000 (18:46 +0200)]
ARM: imx: m53menlo: Convert MMC, USB and block to DM
Enable DM block and DM MMC and DM USB support on iMX53 M53Menlo .
Convert board code to match the DM support. This also enables DM
pincontrol to configure the SDHI pins.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Sun, 9 Jun 2019 16:46:43 +0000 (18:46 +0200)]
ARM: imx: m53menlo: Enable DM GPIO
Enable DM GPIO support on iMX53 M53Menlo and fix up board code where
applicable. Enable MALLOC_F to let the GPIO controllers bind early on.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Sun, 9 Jun 2019 16:46:42 +0000 (18:46 +0200)]
ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux
Import iMX53 M53Menlo device tree from Linux next-
20190607 3f310e51ceb1 .
Enable DT control in full U-Boot . Add U-Boot extras into separate DTSi,
the GPIO controllers need to be inited early, otherwise m53_set_clock()
won't be able to detect the correct CPU clock frequency by reading the
GPIO.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Sun, 9 Jun 2019 16:46:41 +0000 (18:46 +0200)]
ARM: dts: imx: imx53: Synchronize iMX53 DT with Linux
Synchronize iMX53 device tree from Linux next-
20190607 3f310e51ceb1 ,
this is needed to get NFC, UART, USBOTG DT nodes.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Pierre-Jean Texier [Tue, 7 May 2019 21:53:48 +0000 (23:53 +0200)]
pico-imx7d: remove unused 'script' variable
Since the pico-pi uses the distroboot,
this commit remove the 'script' variable (cf boot_scripts).
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Breno Matheus Lima [Tue, 7 May 2019 20:19:17 +0000 (20:19 +0000)]
mx6sl: hab: Fix pu_irom_mmu_enabled address
According to hab.c code we have to notify the ROM code if the MMU is
enabled or not. This is achieved by setting the "pu_irom_mmu_enabled"
to 0x1.
The current address in hab.c code is wrong for i.MX6SL, according to ROM
map file the correct address is 0x00901c60.
As we are writing in the wrong address the ROM code is not flushing the
caches when needed, and the following HAB event is observed in certain
scenarios:
--------- HAB Event 1 -----------------
event data:
0xdb 0x00 0x14 0x41 0x33 0x18 0xc0 0x00
0xca 0x00 0x0c 0x00 0x01 0xc5 0x00 0x00
0x00 0x00 0x07 0xe4
STS = HAB_FAILURE (0x33)
RSN = HAB_INV_SIGNATURE (0x18)
CTX = HAB_CTX_COMMAND (0xC0)
ENG = HAB_ENG_ANY (0x00)
Update MX6SL_PU_IROM_MMU_EN_VAR to address this issue.
Reported-by: Frank Zhang <frank.zhang@nxp.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Fri, 26 Apr 2019 12:36:23 +0000 (09:36 -0300)]
pico-imx7d: README: Adjust the binary name after DM conversion
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
so fix the README file accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Joris Offouga <offougajoris@gmail.com>
Igor Opaniuk [Tue, 25 Jun 2019 11:48:06 +0000 (14:48 +0300)]
apalis_imx6: fix set_emmcargs wrapper
Fix set_emmcargs wrapper, which prepares proper bootargs for booting
from eMMC.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Frieder Schrempf [Tue, 4 Jun 2019 19:56:29 +0000 (21:56 +0200)]
usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDP
Add support for loading u-boot FIT images over the USB SDP protocol in
the SPL
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
[Various build fixes]
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Lukasz Majewski <lukma@denx.de>
Tom Rini [Thu, 27 Jun 2019 11:34:14 +0000 (07:34 -0400)]
Merge tag 'rockchip-for-v2019.07-rc5' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- new board: rk3328 rock64
- rk3328 SPL support
- rk3399 spl/tpl board init cleanup
- use environment to get ATF binary for rk3399
- build u-boot.itb target by default for rockchip
- rk3399 board init fix after pinctrl patch set merged
Eugen Hristev [Wed, 12 Jun 2019 10:16:18 +0000 (13:16 +0300)]
board: atmel: fix pda variable not being reset
In case someone detects a PDA and u-boot sets the 'pda' variable,
and the user does a saveenv, the pda is set in env, and if the
screen is removed, u-boot will still have in the env the 'pda'
variable, even if no screen is attached.
In order to fix this, we have to reset the 'pda' variable,
such that it's not just set if the screen is detected, but also unset
if no screen is detected.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Mark Kettenis [Fri, 21 Jun 2019 20:57:20 +0000 (22:57 +0200)]
rockchip: rk3399: Fix enabling boot-on regulators
The new common rockchip pinctrl driver does not support explicit
requests for a particular pinctrl function. As a result, the
board_init() function bails out early before enabling the boot-on
regulators. Fix this by simply removing the request for pwm0, pwm2
and pwm3. The generic DM code already does the necessary
configuration if necessary.
Reported-by: Levin Du <djw@t-chip.com.cn>
Signed-of-by: Mark Kettenis <kettenis@openbsd.org>
Jagan Teki [Thu, 20 Jun 2019 18:55:06 +0000 (00:25 +0530)]
rockchip: rk3399: Enable TPL_BOARD_INIT
Enable TPL_BOARD_INIT, this would help us to show
TPL boot prints.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Thu, 20 Jun 2019 18:55:05 +0000 (00:25 +0530)]
rockchip: rk3399: tpl: Mark printascii into debug
Now, we have spl_board_init which has TPL banner prints.
So mark the 'U-Boot TPL board init' print into debug.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Thu, 20 Jun 2019 18:55:04 +0000 (00:25 +0530)]
rockchip: rk3399: tpl: Add spl_board_init
Add spl_board_init for TPL, that have TPL banner will help
to print tpl boot prints.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Thu, 20 Jun 2019 18:55:03 +0000 (00:25 +0530)]
rockchip: rk3399: Enable SPL_BOARD_INIT
Enable SPL_BOARD_INIT globally to rk3399, this would
help to print the SPL banner during bootup.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Thu, 20 Jun 2019 18:55:02 +0000 (00:25 +0530)]
rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2
u-boot,dm-pre-reloc for uart0, uart2 indeed u-boot specific
properties. Move them into rk3399-u-boot.dtsi so the boards
which enabled these node will available during SPL.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Thu, 20 Jun 2019 18:55:01 +0000 (00:25 +0530)]
rockchip: rk3399: spl: Mark printascii into debug
Now, we have spl_board_init with preloader_console_init that
indeed show SPL banner.
So mark the 'U-Boot SPL board init' print into debug.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Thu, 20 Jun 2019 18:55:00 +0000 (00:25 +0530)]
rockchip: rk3399: Support common spl_board_init
Support common spl_board_init by moving code from puma
board file into, common rk3399-board-spl.c.
Part of the code has sysreset-gpio, regulators_enable_boot_on
but right now only puma board is using this with relevant
config options rest remains common for all targets.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Thu, 20 Jun 2019 18:54:59 +0000 (00:24 +0530)]
board: rk3399: Drop explicit uart enablement in spl_board_init
preloader_console_init is used for printing SPL boot banner that
usually called from spl_board_init.
The current spl_board_init in evb and rock960 is enabling explicit
pinctrl, debug uart prior to calling preloader_console_init which
eventually not required since board_init_f is already enabled
debug uart.
So, drop those explicit enablement calls from spl_board_init of
evb, rock960.
Tested this by enabling CONFIG_SPL_BOARD_INIT and adding
u-boot,dm-pre-reloc property for uart node.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Thu, 20 Jun 2019 10:07:40 +0000 (15:37 +0530)]
Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip
Add u-boot.itb BUILD_TARGET for Rockchip platform when SPL_LOAD_FIT
is being used.
This can get rid of building itb explicitly with 'make u-boot.itb'
so, from now all required images will build just by make.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Thu, 20 Jun 2019 10:07:39 +0000 (15:37 +0530)]
board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0
Right now puma rk3399 board need to copy bl31-rk3399.bin and
rk3399m0.bin into u-boot source directory to make use of building
u-boot.itb.
So, add environment variable
- BL31 for bl31.bin (instead of bl31-rk3399.bin to compatible with other
platform BL31 env)
- PMUM0 for rk3399m0.bin
If the builds are not exporting BL31, PMUM0 env, the fit_spl_atf.sh will
notify with warning about which document to refer for more information
like this:
WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
Please read Building section in doc/README.rockchip
WARNING: PMUM0 file rk3399m0.bin NOT found, resulting binary is non-functional
Please read Building section in doc/README.rockchip
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Thu, 20 Jun 2019 10:59:22 +0000 (16:29 +0530)]
rockchip: rk3399: Get bl31.elf via BL31
Right now rockchip platform need to copy bl31.elf into u-boot
source directory to make use of building u-boot.itb.
So, add environment variable BL31 like Allwinner SoC so-that the
bl31.elf would available via BL31.
If the builds are not exporting BL31 env, the make_fit_atf.py
explicitly create dummy bl31.elf in u-boot root directory to
satisfy travis builds and it will show the warning on console as
WARNING: BL31 file bl31.elf NOT found, resulting binary is non-functional
WARNING: Please read Building section in doc/README.rockchip
Note, that the dummy bl31 files were created during not exporting
BL31 case would be removed via clean target in Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Tue, 7 May 2019 18:52:12 +0000 (00:22 +0530)]
travis.yml: Add pyelftools install entry
Currently rockchip platform is using explicit 'make u-boot.itb' for
building u-boot.itb but if we enable CONFIG_BUILD_TARGET as 'u-boot.itb'
then the resulting u-boot.itb directly will create by make.
But, that indeed make travis build fail since it require python-pyelftools
host package.
So add pyelftools install entry as 'pip install pyelftools', this would
create pyelftools on travis host which are required to build rk3399 itb.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Tue, 7 May 2019 18:52:11 +0000 (00:22 +0530)]
Makefile: clean bl31_*.bin
Rockchip platform has its python script that would generate various
bl31_*bin for creating u-boot.itb file by taking bl31.elf as input.
These bl31_*.bin files are generated in u-boot root directory and
have no rule to clean it up. so add support for it by adding in
command entry of clean target in Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jagan Teki [Tue, 7 May 2019 18:52:10 +0000 (00:22 +0530)]
Makefile: clean image.map
binman tools for creating single image build will create image.map
at the end, which has information about binman image node details.
current u-boot, is unable to clean this image.map so add a command
entry in clean target in Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Matwey V. Kornilov [Sat, 8 Jun 2019 21:27:18 +0000 (00:27 +0300)]
doc: rockchip: Add note for Pine64 Rock64 board
Add build notes for Pine64 Rock64 board.
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Matwey V. Kornilov [Sat, 8 Jun 2019 21:27:17 +0000 (00:27 +0300)]
rockchip: rk3328: add rock64-rk3328_defconfig
The ROCK64 is a credit card size SBC based on Rockchip RK3328
Quad-Core ARM Cortex A53.
This series allow building u-boot SPL and u-boot.itb for Rock64
board. The proprietary TPL is stil required for deploy:
./tools/mkimage -n rk3328 -T rksd \
-d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
cat ./spl/u-boot-spl.bin >> idbloader.img
dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Matwey V. Kornilov [Sat, 8 Jun 2019 21:27:16 +0000 (00:27 +0300)]
rockchip: dts: rk3328: add rk3328-rock64.dts
rk3328-rock64.dts has been taken from Linux kernel commit
cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64")
with minor modifications (drop nodes not known by rk3328.dtsi).
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Sat, 8 Jun 2019 21:27:15 +0000 (00:27 +0300)]
rockchip: Kconfig: enable SPL support for rk3328
Enable SPL support and some related option in Kconfig.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/
430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Kever Yang [Sat, 8 Jun 2019 21:27:14 +0000 (00:27 +0300)]
rockchip: rk3328: add SPL support
Add SPL support for rk3328, default with of-platdata enabled.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/
cb2b7a1bc75ebb116b1eb9b0ae0223e84d86fc4b with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Sat, 8 Jun 2019 21:27:13 +0000 (00:27 +0300)]
rockchip: rk3328: add SPL board file support
rk3328 SPL is locate at dram, so do not have strict size limit,
suppose to enable storage media controller driver, load ATF and
U-Boot, then boot into ATF.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/
4ebe3968b683190cb8e5741aa7227b4fa7497874 with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tom Rini [Sat, 22 Jun 2019 16:09:33 +0000 (12:09 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- boot failure fix for Intel edison
- tangier wdt conversion to driver model
Andy Shevchenko [Fri, 21 Jun 2019 10:28:08 +0000 (13:28 +0300)]
watchdog: tangier: Convert to use WDT class
Convert legacy driver to use watchdog class.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Andy Shevchenko [Fri, 21 Jun 2019 10:28:07 +0000 (13:28 +0300)]
watchdog: tangier: Replace unused constant with a comment
The default timeout value had been left in order to leave some traces
about default setup of watchdog done by firmware.
For better understanding and compiler burden, replace it with a comment.
Suggested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Tue, 18 Jun 2019 16:06:34 +0000 (19:06 +0300)]
x86: Revert "Don't set up MTRRs in SPL"
This breaks Intel Edison to work. It gets laggish and unable to boot kernel.
Reverts commit
665cb18ea64aabbeb03d27a4c92ddec1baccb87a for now
till better solution will be proposed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Fri, 21 Jun 2019 18:12:28 +0000 (14:12 -0400)]
Merge tag 'efi-2019-07-rc5-3' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for v2019.07-rc5 (3)
This pull request provides error fixes for the graphical output protocol,
the text output protocol, and the extended text input protocol.
Setting the boot device for the bootefi command is now not only supported
by the 'load' command but also for the file system specific commands like
'fatload'.
Tom Rini [Fri, 21 Jun 2019 18:11:11 +0000 (14:11 -0400)]
Merge branch '2019-06-21-master-imports'
- Assorted small fixes
- Bugfix RSA handling code to reject images with unknown padding.
- Some boards disabled unused features to turn off DM warnings.
Tom Rini [Fri, 21 Jun 2019 14:11:23 +0000 (10:11 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Felix Brack [Tue, 11 Jun 2019 08:39:52 +0000 (10:39 +0200)]
arm: am335x-pdu001: Remove watchdog support
This board does not require watchdog support.
Signed-off-by: Felix Brack <fb@ltec.ch>
Peng Fan [Thu, 6 Jun 2019 07:59:16 +0000 (07:59 +0000)]
lib: Makefile: build fdtdec_common.c when OF_LIBFDT selected
When build SPL_OF_PLATDATA on i.MX6, meet issue the fdtdec_get_int
not defined, however fdtdec.c will use fdtdec_get_int, so let's
compile fdtdec_common.c when OF_LIBFDT selected.
Since there is also SPL_OF_LIBFDT, so need to use
CONFIG_$(SPL_TPL_)OF_LIBFDT.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Bin Meng [Wed, 5 Jun 2019 14:26:44 +0000 (07:26 -0700)]
pci: Avoid assigning PCI resources that are below 0x1000
commit
b7598a43f2b4 ("[PATCH] Avoid assigning PCI resources from
zero address") only moved the bus lower address to 0x1000 if the
given bus start address is zero. The comment said 0x1000 is a
reasonable starting value, hence we'd better apply the same
adjustment when the given bus start address is below 0x1000.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Joshua Watt [Thu, 20 Jun 2019 21:31:35 +0000 (16:31 -0500)]
config_distro_bootcmd: Init IDE devices
IDE devices are no longer automatically probed by u-boot, so it should
be done by the distro boot command before attempting to boot from IDE
(just like scsi and nvme)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Michal Simek [Thu, 20 Jun 2019 06:02:46 +0000 (08:02 +0200)]
arm64: zynqmp: Cover ultra96 dts file by MAINTAINERS fragment
Avnet Ultra96 dts file should be also cover by MAINTAINERS fragment.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Prabhakar Kushwaha [Wed, 19 Jun 2019 12:17:12 +0000 (17:47 +0530)]
travis.yml: Add buildman support for NXP's LS1028 & LX2160
NXP's LS1028 and LX2160 platform build support added via buildman
in travis.yml.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Robert Hancock [Tue, 18 Jun 2019 15:53:04 +0000 (09:53 -0600)]
disk: part: Don't skip partition init
blk_get_device_by_str was skipping part_init when hw partition 0 was
selected because it is the default. However, this caused issues when
switching to a non-zero partition and then back to partition zero, as
stale data from the wrong partition was returned.
Remove this optimization and call part_init regardless of the selected
partition.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Moses Christopher [Tue, 18 Jun 2019 13:54:02 +0000 (13:54 +0000)]
am335x, guardian: update the maintainer list
Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
Masahiro Yamada [Tue, 18 Jun 2019 03:25:51 +0000 (12:25 +0900)]
vexpress64: fix a typo of SPDX-License-Identifier
Misspelling of SPDX-License-Identifier is rather fatal than other
general typos, so must be fixed.
This file spells SPDX-Licence-Identifier.
^
I also moved it to the very top of the file with // comment style.
Detected by grepping the source tree:
$ git grep --not -e SPDX-License-Identifier --and -e SPDX-
board/armltd/vexpress64/pcie.c: * SPDX-Licence-Identifier: GPL-2.0+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Oleksandr Zhadan [Mon, 17 Jun 2019 20:10:23 +0000 (16:10 -0400)]
board: Arcturus: DM: Disable drivers without DM support.
Extra "not DM" controllers support is disabled.
u-boot BSP still good enough to upgrade and run images.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Anatolij Gustschin [Mon, 17 Jun 2019 13:33:55 +0000 (15:33 +0200)]
cmd/led.c: fix typos in online help
Remove square brackets around label in state command description.
Fixes:
ea41b15617fa ("cmd/led: check subcommand "list" instead "l"")
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Patrick Doyle [Fri, 14 Jun 2019 17:43:38 +0000 (13:43 -0400)]
rsa: reject images with unknown padding
Previously we would store NULL in info->padding and jump to an illegal
instruction if an unknown value for "padding" was specified in the
device tree.
Signed-off-by: Patrick Doyle <pdoyle@irobot.com>
Tom Rini [Fri, 21 Jun 2019 01:52:31 +0000 (21:52 -0400)]
Merge branch '2019-06-20-master-imports'
- Assorted minor fixes