Rob Herring [Fri, 27 Jan 2023 20:55:46 +0000 (14:55 -0600)]
perf arm-spe: Only warn once for each unsupported address packet
Unknown address packet indexes are not an error as the Arm architecture
can (and has with SPEv1.2) define new ones and implementation defined
ones are also allowed. The error message for every occurrence of the
packet is needlessly noisy as well. Change the message to print just
once for each unknown index.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230127205546.667740-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Krister Johansen [Wed, 25 Jan 2023 18:34:18 +0000 (10:34 -0800)]
perf symbols: Symbol lookup with kcore can fail if multiple segments match stext
This problem was encountered on an arm64 system with a lot of memory.
Without kernel debug symbols installed, and with both kcore and kallsyms
available, perf managed to get confused and returned "unknown" for all
of the kernel symbols that it tried to look up.
On this system, stext fell within the vmalloc segment. The kcore symbol
matching code tries to find the first segment that contains stext and
uses that to replace the segment generated from just the kallsyms
information. In this case, however, there were two: a very large
vmalloc segment, and the text segment. This caused perf to get confused
because multiple overlapping segments were inserted into the RB tree
that holds the discovered segments. However, that alone wasn't
sufficient to cause the problem. Even when we could find the segment,
the offsets were adjusted in such a way that the newly generated symbols
didn't line up with the instruction addresses in the trace. The most
obvious solution would be to consult which segment type is text from
kcore, but this information is not exposed to users.
Instead, select the smallest matching segment that contains stext
instead of the first matching segment. This allows us to match the text
segment instead of vmalloc, if one is contained within the other.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Reaver <me@davidreaver.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230125183418.GD1963@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Tue, 31 Jan 2023 13:47:48 +0000 (19:17 +0530)]
perf probe: Fix usage when libtraceevent is missing
While parsing the tracepoint events in parse_events_add_tracepoint()
function, code checks for HAVE_LIBTRACEEVENT support. This is needed
since libtraceevent is necessary for tracepoint. But while adding probe
points, check for LIBTRACEEVENT is not done in case of perf probe.
Hence, in environment with missing libtraceevent-devel, it is observed
that adding a probe point shows below message though it can't be used
via perf record.
Example:
Adding probe point:
./perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
But trying perf record:
./perf record -e probe:vfs_getname -aR sleep 1
event syntax error: 'probe:vfs_getname'
\___ unsupported tracepoint
libtraceevent is necessary for tracepoint support
Run 'perf list' for a list of valid events
The builtin tool like perf record needs libtraceevent to
parse tracefs. But still the probe can be used by enabling
via tracefs. Patch fixes the probe usage message to the user
based on presence of libtraceevent. With the fix,
# ./perf probe 'pmu:myprobe=schedule'
Added new event:
pmu:myprobe (on schedule)
perf is not linked with libtraceevent, to use the new probe you can use tracefs:
cd /sys/kernel/tracing/
echo 1 > events/pmu/myprobe/enable
echo 1 > tracing_on
cat trace_pipe
Before removing the probe, echo 0 > events/pmu/myprobe/enable
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230131134748.54567-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 31 Jan 2023 13:16:25 +0000 (15:16 +0200)]
perf symbols: Get symbols for .plt.got for x86-64
For x86_64, determine a symbol for .plt.got entries. That requires
computing the target offset and finding that in .rela.dyn, which in
turn means .rela.dyn needs to be sorted by offset.
Example:
In this example, the GNU C Library is using .plt.got for malloc and
free.
Before:
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.027 MB perf.data ]
$ perf script --itrace=be --ns -F-event,+addr,-period,-comm,-tid,-cpu > /tmp/cmp1.txt
After:
$ perf script --itrace=be --ns -F-event,+addr,-period,-comm,-tid,-cpu > /tmp/cmp2.txt
$ diff /tmp/cmp1.txt /tmp/cmp2.txt | head -12
15509,
15510c15509,15510
< 27046.
755390907:
7f0b2943e3ab _nl_normalize_codeset+0x5b (/usr/lib/x86_64-linux-gnu/libc.so.6) =>
7f0b29428380 offset_0x28380@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
< 27046.
755390907:
7f0b29428384 offset_0x28380@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) =>
7f0b294a5120 malloc+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
---
> 27046.
755390907:
7f0b2943e3ab _nl_normalize_codeset+0x5b (/usr/lib/x86_64-linux-gnu/libc.so.6) =>
7f0b29428380 malloc@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
> 27046.
755390907:
7f0b29428384 malloc@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) =>
7f0b294a5120 malloc+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
15821,
15822c15821,15822
< 27046.
755394865:
7f0b2943850c _nl_load_locale_from_archive+0x5bc (/usr/lib/x86_64-linux-gnu/libc.so.6) =>
7f0b29428370 offset_0x28370@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
< 27046.
755394865:
7f0b29428374 offset_0x28370@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) =>
7f0b294a5460 cfree@GLIBC_2.2.5+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
---
> 27046.
755394865:
7f0b2943850c _nl_load_locale_from_archive+0x5bc (/usr/lib/x86_64-linux-gnu/libc.so.6) =>
7f0b29428370 free@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
> 27046.
755394865:
7f0b29428374 free@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) =>
7f0b294a5460 cfree@GLIBC_2.2.5+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 31 Jan 2023 13:16:24 +0000 (15:16 +0200)]
perf symbols: Start adding support for .plt.got for x86
For x86, .plt.got is used, for example, when the address is taken of a
dynamically linked function. Start adding support by synthesizing a
symbol for each entry. A subsequent patch will attempt to get a better
name for the symbol.
Example:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstpltgot.c
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
void callfn(void (*fn)(void))
{
fn();
}
int main()
{
fn4();
fn1();
callfn(fn3);
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -o tstpltgot tstpltgot.c -L . -ltstpltlib -Wl,-rpath="$(pwd)"
$ readelf -SW tstpltgot | grep 'Name\|plt\|dyn'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 6] .dynsym DYNSYM
00000000000003d8 0003d8 0000f0 18 A 7 1 8
[ 7] .dynstr STRTAB
00000000000004c8 0004c8 0000c6 00 A 0 0 1
[10] .rela.dyn RELA
00000000000005d8 0005d8 0000d8 18 A 6 0 8
[11] .rela.plt RELA
00000000000006b0 0006b0 000048 18 AI 6 24 8
[13] .plt PROGBITS
0000000000001020 001020 000040 10 AX 0 0 16
[14] .plt.got PROGBITS
0000000000001060 001060 000020 10 AX 0 0 16
[15] .plt.sec PROGBITS
0000000000001080 001080 000030 10 AX 0 0 16
[23] .dynamic DYNAMIC
0000000000003d90 002d90 000210 10 WA 7 0 8
$ perf record -e intel_pt//u --filter 'filter main @ ./tstpltgot , filter callfn @ ./tstpltgot' ./tstpltgot
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
28393.
810326915: tr strt 0 [unknown] =>
562350baa1b2 main+0x0
28393.
810326915: tr end call
562350baa1ba main+0x8 =>
562350baa090 fn4@plt+0x0
28393.
810326917: tr strt 0 [unknown] =>
562350baa1bf main+0xd
28393.
810326917: tr end call
562350baa1bf main+0xd =>
562350baa080 fn1@plt+0x0
28393.
810326917: tr strt 0 [unknown] =>
562350baa1c4 main+0x12
28393.
810326917: call
562350baa1ce main+0x1c =>
562350baa199 callfn+0x0
28393.
810326917: tr end call
562350baa1ad callfn+0x14 =>
7f607d36110f fn3+0x0
28393.
810326922: tr strt 0 [unknown] =>
562350baa1af callfn+0x16
28393.
810326922: return
562350baa1b1 callfn+0x18 =>
562350baa1d3 main+0x21
28393.
810326922: tr end call
562350baa1d3 main+0x21 =>
562350baa0a0 fn2@plt+0x0
28393.
810326924: tr strt 0 [unknown] =>
562350baa1d8 main+0x26
28393.
810326924: tr end call
562350baa1d8 main+0x26 =>
562350baa060 [unknown] <- call to fn3 via .plt.got
28393.
810326925: tr strt 0 [unknown] =>
562350baa1dd main+0x2b
28393.
810326925: tr end return
562350baa1e3 main+0x31 =>
7f607d029d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
28393.
810326915: tr strt 0 [unknown] =>
562350baa1b2 main+0x0
28393.
810326915: tr end call
562350baa1ba main+0x8 =>
562350baa090 fn4@plt+0x0
28393.
810326917: tr strt 0 [unknown] =>
562350baa1bf main+0xd
28393.
810326917: tr end call
562350baa1bf main+0xd =>
562350baa080 fn1@plt+0x0
28393.
810326917: tr strt 0 [unknown] =>
562350baa1c4 main+0x12
28393.
810326917: call
562350baa1ce main+0x1c =>
562350baa199 callfn+0x0
28393.
810326917: tr end call
562350baa1ad callfn+0x14 =>
7f607d36110f fn3+0x0
28393.
810326922: tr strt 0 [unknown] =>
562350baa1af callfn+0x16
28393.
810326922: return
562350baa1b1 callfn+0x18 =>
562350baa1d3 main+0x21
28393.
810326922: tr end call
562350baa1d3 main+0x21 =>
562350baa0a0 fn2@plt+0x0
28393.
810326924: tr strt 0 [unknown] =>
562350baa1d8 main+0x26
28393.
810326924: tr end call
562350baa1d8 main+0x26 =>
562350baa060 offset_0x1060@plt+0x0
28393.
810326925: tr strt 0 [unknown] =>
562350baa1dd main+0x2b
28393.
810326925: tr end return
562350baa1e3 main+0x31 =>
7f607d029d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 31 Jan 2023 13:16:23 +0000 (15:16 +0200)]
perf symbols: Allow for static executables with .plt
A statically linked executable can have a .plt due to IFUNCs, in which
case .symtab is used not .dynsym. Check the section header link to see
if that is the case, and then use symtab instead.
Example:
Before:
$ cat tstifunc.c
#include <stdio.h>
void thing1(void)
{
printf("thing1\n");
}
void thing2(void)
{
printf("thing2\n");
}
typedef void (*thing_fn_t)(void);
thing_fn_t thing_ifunc(void)
{
int x;
if (x & 1)
return thing2;
return thing1;
}
void thing(void) __attribute__ ((ifunc ("thing_ifunc")));
int main()
{
thing();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -static -Wall -Wextra -Wno-uninitialized -o tstifuncstatic tstifunc.c
$ readelf -SW tstifuncstatic | grep 'Name\|plt\|dyn'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 4] .rela.plt RELA
00000000004002e8 0002e8 000258 18 AI 29 20 8
[ 6] .plt PROGBITS
0000000000401020 001020 000190 00 AX 0 0 16
[20] .got.plt PROGBITS
00000000004c5000 0c4000 0000e0 08 WA 0 0 8
$ perf record -e intel_pt//u --filter 'filter main @ ./tstifuncstatic' ./tstifuncstatic
thing1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
15786.
690189535: tr strt 0 [unknown] => 4017cd main+0x0
15786.
690189535: tr end call 4017d5 main+0x8 => 401170 [unknown]
15786.
690197660: tr strt 0 [unknown] => 4017da main+0xd
15786.
690197660: tr end return 4017e0 main+0x13 => 401c1a __libc_start_call_main+0x6a
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
15786.
690189535: tr strt 0 [unknown] => 4017cd main+0x0
15786.
690189535: tr end call 4017d5 main+0x8 => 401170 thing_ifunc@plt+0x0
15786.
690197660: tr strt 0 [unknown] => 4017da main+0xd
15786.
690197660: tr end return 4017e0 main+0x13 => 401c1a __libc_start_call_main+0x6a
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 31 Jan 2023 13:16:22 +0000 (15:16 +0200)]
perf symbols: Allow for .plt without header
A static executable can have a .plt due to the presence of IFUNCs. In
that case the .plt does not have a header. Check for whether there is a
header by comparing the number of entries to the number of relocation
entries.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 31 Jan 2023 13:16:21 +0000 (15:16 +0200)]
perf symbols: Add support for IFUNC symbols for x86_64
For x86_64, the GNU linker is putting IFUNC information in the relocation
addend, so use it to try to find a symbol for plt entries that refer to
IFUNCs.
Example:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstpltifunc.c
#include <stdio.h>
void thing1(void)
{
printf("thing1\n");
}
void thing2(void)
{
printf("thing2\n");
}
typedef void (*thing_fn_t)(void);
thing_fn_t thing_ifunc(void)
{
int x;
if (x & 1)
return thing2;
return thing1;
}
void thing(void) __attribute__ ((ifunc ("thing_ifunc")));
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
thing();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -Wno-uninitialized -o tstpltifunc tstpltifunc.c -L . -ltstpltlib -Wl,-rpath="$(pwd)"
$ readelf -rW tstpltifunc | grep -A99 plt
Relocation section '.rela.plt' at offset 0x738 contains 8 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000003f98 0000000300000007 R_X86_64_JUMP_SLOT
0000000000000000 puts@GLIBC_2.2.5 + 0
0000000000003fa8 0000000400000007 R_X86_64_JUMP_SLOT
0000000000000000 __stack_chk_fail@GLIBC_2.4 + 0
0000000000003fb0 0000000500000007 R_X86_64_JUMP_SLOT
0000000000000000 fn1 + 0
0000000000003fb8 0000000600000007 R_X86_64_JUMP_SLOT
0000000000000000 fn3 + 0
0000000000003fc0 0000000800000007 R_X86_64_JUMP_SLOT
0000000000000000 fn4 + 0
0000000000003fc8 0000000900000007 R_X86_64_JUMP_SLOT
0000000000000000 fn2 + 0
0000000000003fd0 0000000b00000007 R_X86_64_JUMP_SLOT
0000000000000000 getrandom@GLIBC_2.25 + 0
0000000000003fa0 0000000000000025 R_X86_64_IRELATIVE 125d
$ perf record -e intel_pt//u --filter 'filter main @ ./tstpltifunc' ./tstpltifunc
thing2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
21860.
073683659: tr strt 0 [unknown] =>
561e212c42be main+0x0
21860.
073683659: tr end call
561e212c42c6 main+0x8 =>
561e212c4110 fn4@plt+0x0
21860.
073683661: tr strt 0 [unknown] =>
561e212c42cb main+0xd
21860.
073683661: tr end call
561e212c42cb main+0xd =>
561e212c40f0 fn1@plt+0x0
21860.
073683661: tr strt 0 [unknown] =>
561e212c42d0 main+0x12
21860.
073683661: tr end call
561e212c42d0 main+0x12 =>
561e212c40d0 offset_0x10d0@plt+0x0
21860.
073698451: tr strt 0 [unknown] =>
561e212c42d5 main+0x17
21860.
073698451: tr end call
561e212c42d5 main+0x17 =>
561e212c4120 fn2@plt+0x0
21860.
073698451: tr strt 0 [unknown] =>
561e212c42da main+0x1c
21860.
073698451: tr end call
561e212c42da main+0x1c =>
561e212c4100 fn3@plt+0x0
21860.
073698452: tr strt 0 [unknown] =>
561e212c42df main+0x21
21860.
073698452: tr end return
561e212c42e5 main+0x27 =>
7fb51cc29d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
21860.
073683659: tr strt 0 [unknown] =>
561e212c42be main+0x0
21860.
073683659: tr end call
561e212c42c6 main+0x8 =>
561e212c4110 fn4@plt+0x0
21860.
073683661: tr strt 0 [unknown] =>
561e212c42cb main+0xd
21860.
073683661: tr end call
561e212c42cb main+0xd =>
561e212c40f0 fn1@plt+0x0
21860.
073683661: tr strt 0 [unknown] =>
561e212c42d0 main+0x12
21860.
073683661: tr end call
561e212c42d0 main+0x12 =>
561e212c40d0 thing_ifunc@plt+0x0
21860.
073698451: tr strt 0 [unknown] =>
561e212c42d5 main+0x17
21860.
073698451: tr end call
561e212c42d5 main+0x17 =>
561e212c4120 fn2@plt+0x0
21860.
073698451: tr strt 0 [unknown] =>
561e212c42da main+0x1c
21860.
073698451: tr end call
561e212c42da main+0x1c =>
561e212c4100 fn3@plt+0x0
21860.
073698452: tr strt 0 [unknown] =>
561e212c42df main+0x21
21860.
073698452: tr end return
561e212c42e5 main+0x27 =>
7fb51cc29d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 31 Jan 2023 13:16:20 +0000 (15:16 +0200)]
perf symbols: Record whether a symbol is an alias for an IFUNC symbol
To assist with synthesizing plt symbols for IFUNCs, record whether a
symbol is an alias of an IFUNC symbol.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 31 Jan 2023 13:16:19 +0000 (15:16 +0200)]
perf symbols: Sort plt relocations for x86
For x86, with the addition of IFUNCs, relocation information becomes
disordered with respect to plt. Correct that by sorting the relocations by
offset.
Example:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstpltifunc.c
#include <stdio.h>
void thing1(void)
{
printf("thing1\n");
}
void thing2(void)
{
printf("thing2\n");
}
typedef void (*thing_fn_t)(void);
thing_fn_t thing_ifunc(void)
{
int x;
if (x & 1)
return thing2;
return thing1;
}
void thing(void) __attribute__ ((ifunc ("thing_ifunc")));
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
thing();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -Wno-uninitialized -o tstpltifunc tstpltifunc.c -L . -ltstpltlib -Wl,-rpath="$(pwd)"
$ readelf -rW tstpltifunc | grep -A99 plt
Relocation section '.rela.plt' at offset 0x738 contains 8 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000003f98 0000000300000007 R_X86_64_JUMP_SLOT
0000000000000000 puts@GLIBC_2.2.5 + 0
0000000000003fa8 0000000400000007 R_X86_64_JUMP_SLOT
0000000000000000 __stack_chk_fail@GLIBC_2.4 + 0
0000000000003fb0 0000000500000007 R_X86_64_JUMP_SLOT
0000000000000000 fn1 + 0
0000000000003fb8 0000000600000007 R_X86_64_JUMP_SLOT
0000000000000000 fn3 + 0
0000000000003fc0 0000000800000007 R_X86_64_JUMP_SLOT
0000000000000000 fn4 + 0
0000000000003fc8 0000000900000007 R_X86_64_JUMP_SLOT
0000000000000000 fn2 + 0
0000000000003fd0 0000000b00000007 R_X86_64_JUMP_SLOT
0000000000000000 getrandom@GLIBC_2.25 + 0
0000000000003fa0 0000000000000025 R_X86_64_IRELATIVE 125d
$ perf record -e intel_pt//u --filter 'filter main @ ./tstpltifunc' ./tstpltifunc
thing2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.029 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
20417.
302513948: tr strt 0 [unknown] =>
5629a74892be main+0x0
20417.
302513948: tr end call
5629a74892c6 main+0x8 =>
5629a7489110 fn2@plt+0x0
20417.
302513949: tr strt 0 [unknown] =>
5629a74892cb main+0xd
20417.
302513949: tr end call
5629a74892cb main+0xd =>
5629a74890f0 fn3@plt+0x0
20417.
302513950: tr strt 0 [unknown] =>
5629a74892d0 main+0x12
20417.
302513950: tr end call
5629a74892d0 main+0x12 =>
5629a74890d0 __stack_chk_fail@plt+0x0
20417.
302528114: tr strt 0 [unknown] =>
5629a74892d5 main+0x17
20417.
302528114: tr end call
5629a74892d5 main+0x17 =>
5629a7489120 getrandom@plt+0x0
20417.
302528115: tr strt 0 [unknown] =>
5629a74892da main+0x1c
20417.
302528115: tr end call
5629a74892da main+0x1c =>
5629a7489100 fn4@plt+0x0
20417.
302528115: tr strt 0 [unknown] =>
5629a74892df main+0x21
20417.
302528115: tr end return
5629a74892e5 main+0x27 =>
7ff14da29d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
20417.
302513948: tr strt 0 [unknown] =>
5629a74892be main+0x0
20417.
302513948: tr end call
5629a74892c6 main+0x8 =>
5629a7489110 fn4@plt+0x0
20417.
302513949: tr strt 0 [unknown] =>
5629a74892cb main+0xd
20417.
302513949: tr end call
5629a74892cb main+0xd =>
5629a74890f0 fn1@plt+0x0
20417.
302513950: tr strt 0 [unknown] =>
5629a74892d0 main+0x12
20417.
302513950: tr end call
5629a74892d0 main+0x12 =>
5629a74890d0 offset_0x10d0@plt+0x0
20417.
302528114: tr strt 0 [unknown] =>
5629a74892d5 main+0x17
20417.
302528114: tr end call
5629a74892d5 main+0x17 =>
5629a7489120 fn2@plt+0x0
20417.
302528115: tr strt 0 [unknown] =>
5629a74892da main+0x1c
20417.
302528115: tr end call
5629a74892da main+0x1c =>
5629a7489100 fn3@plt+0x0
20417.
302528115: tr strt 0 [unknown] =>
5629a74892df main+0x21
20417.
302528115: tr end return
5629a74892e5 main+0x27 =>
7ff14da29d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 31 Jan 2023 13:16:18 +0000 (15:16 +0200)]
perf symbols: Add support for x86 .plt.sec
The section .plt.sec was originally added for MPX and was first called
.plt.bnd. While MPX has been deprecated, .plt.sec is now also used for
IBT. On x86_64, IBT may be enabled by default, but can be switched off
using gcc option -fcf-protection=none, or switched on by -z ibt or -z
ibtplt. On 32-bit, option -z ibt or -z ibtplt will enable IBT.
With .plt.sec, calls are made into .plt.sec instead of .plt, so it makes
more sense to put the symbols there instead of .plt. A notable
difference is that .plt.sec does not have a header entry.
For x86, when synthesizing symbols for plt, use offset and entry size of
.plt.sec instead of .plt when there is a .plt.sec section.
Example on Ubuntu 22.04 gcc 11.3:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstplt.c
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -z ibt -o tstplt tstplt.c -L . -ltstpltlib -Wl,-rpath=$(pwd)
$ readelf -SW tstplt | grep 'plt\|Name'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[11] .rela.plt RELA
0000000000000698 000698 000060 18 AI 6 24 8
[13] .plt PROGBITS
0000000000001020 001020 000050 10 AX 0 0 16
[14] .plt.got PROGBITS
0000000000001070 001070 000010 10 AX 0 0 16
[15] .plt.sec PROGBITS
0000000000001080 001080 000040 10 AX 0 0 16
$ perf record -e intel_pt//u --filter 'filter main @ ./tstplt' ./tstplt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
38970.
522546686: tr strt 0 [unknown] =>
55fc222a81a9 main+0x0
38970.
522546686: tr end call
55fc222a81b1 main+0x8 =>
55fc222a80a0 [unknown]
38970.
522546687: tr strt 0 [unknown] =>
55fc222a81b6 main+0xd
38970.
522546687: tr end call
55fc222a81b6 main+0xd =>
55fc222a8080 [unknown]
38970.
522546688: tr strt 0 [unknown] =>
55fc222a81bb main+0x12
38970.
522546688: tr end call
55fc222a81bb main+0x12 =>
55fc222a80b0 [unknown]
38970.
522546688: tr strt 0 [unknown] =>
55fc222a81c0 main+0x17
38970.
522546688: tr end call
55fc222a81c0 main+0x17 =>
55fc222a8090 [unknown]
38970.
522546689: tr strt 0 [unknown] =>
55fc222a81c5 main+0x1c
38970.
522546894: tr end return
55fc222a81cb main+0x22 =>
7f3a4dc29d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
38970.
522546686: tr strt 0 [unknown] =>
55fc222a81a9 main+0x0
38970.
522546686: tr end call
55fc222a81b1 main+0x8 =>
55fc222a80a0 fn4@plt+0x0
38970.
522546687: tr strt 0 [unknown] =>
55fc222a81b6 main+0xd
38970.
522546687: tr end call
55fc222a81b6 main+0xd =>
55fc222a8080 fn1@plt+0x0
38970.
522546688: tr strt 0 [unknown] =>
55fc222a81bb main+0x12
38970.
522546688: tr end call
55fc222a81bb main+0x12 =>
55fc222a80b0 fn2@plt+0x0
38970.
522546688: tr strt 0 [unknown] =>
55fc222a81c0 main+0x17
38970.
522546688: tr end call
55fc222a81c0 main+0x17 =>
55fc222a8090 fn3@plt+0x0
38970.
522546689: tr strt 0 [unknown] =>
55fc222a81c5 main+0x1c
38970.
522546894: tr end return
55fc222a81cb main+0x22 =>
7f3a4dc29d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 31 Jan 2023 13:16:17 +0000 (15:16 +0200)]
perf symbols: Correct plt entry sizes for x86
In 32-bit executables the .plt entry size can be set to 4 when it is really
16. In fact the only sizes used for x86 (32 or 64 bit) are 8 or 16, so
check for those and, if not, use the alignment to choose which it is.
Example on Ubuntu 22.04 gcc 11.3:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstplt.c
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -m32 -Wall -Wextra -shared -o libtstpltlib32.so tstpltlib.c
$ gcc -m32 -Wall -Wextra -o tstplt32 tstplt.c -L . -ltstpltlib32 -Wl,-rpath=$(pwd)
$ perf record -e intel_pt//u --filter 'filter main @ ./tstplt32' ./tstplt32
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
$ readelf -SW tstplt32 | grep 'plt\|Name'
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[10] .rel.plt REL
0000041c 00041c 000028 08 AI 5 22 4
[12] .plt PROGBITS
00001030 001030 000060 04 AX 0 0 16 <- ES is 0x04, should be 0x10
[13] .plt.got PROGBITS
00001090 001090 000008 08 AX 0 0 8
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
17894.
383903029: tr strt 0 [unknown] =>
565b81cd main+0x0
17894.
383903029: tr end call
565b81d4 main+0x7 =>
565b80d0 __x86.get_pc_thunk.bx+0x0
17894.
383903031: tr strt 0 [unknown] =>
565b81d9 main+0xc
17894.
383903031: tr end call
565b81df main+0x12 =>
565b8070 [unknown]
17894.
383903032: tr strt 0 [unknown] =>
565b81e4 main+0x17
17894.
383903032: tr end call
565b81e4 main+0x17 =>
565b8050 [unknown]
17894.
383903033: tr strt 0 [unknown] =>
565b81e9 main+0x1c
17894.
383903033: tr end call
565b81e9 main+0x1c =>
565b8080 [unknown]
17894.
383903033: tr strt 0 [unknown] =>
565b81ee main+0x21
17894.
383903033: tr end call
565b81ee main+0x21 =>
565b8060 [unknown]
17894.
383903237: tr strt 0 [unknown] =>
565b81f3 main+0x26
17894.
383903237: tr end return
565b81fc main+0x2f =>
f7c21519 [unknown]
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
17894.
383903029: tr strt 0 [unknown] =>
565b81cd main+0x0
17894.
383903029: tr end call
565b81d4 main+0x7 =>
565b80d0 __x86.get_pc_thunk.bx+0x0
17894.
383903031: tr strt 0 [unknown] =>
565b81d9 main+0xc
17894.
383903031: tr end call
565b81df main+0x12 =>
565b8070 fn4@plt+0x0
17894.
383903032: tr strt 0 [unknown] =>
565b81e4 main+0x17
17894.
383903032: tr end call
565b81e4 main+0x17 =>
565b8050 fn1@plt+0x0
17894.
383903033: tr strt 0 [unknown] =>
565b81e9 main+0x1c
17894.
383903033: tr end call
565b81e9 main+0x1c =>
565b8080 fn2@plt+0x0
17894.
383903033: tr strt 0 [unknown] =>
565b81ee main+0x21
17894.
383903033: tr end call
565b81ee main+0x21 =>
565b8060 fn3@plt+0x0
17894.
383903237: tr strt 0 [unknown] =>
565b81f3 main+0x26
17894.
383903237: tr end return
565b81fc main+0x2f =>
f7c21519 [unknown]
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Wed, 1 Feb 2023 18:04:21 +0000 (23:34 +0530)]
perf tests shell: Fix check for libtracevent support
Test “Use vfs_getname probe to get syscall args filenames” fails in
environment with missing libtraceevent support as below:
82: Use vfs_getname probe to get syscall args filenames :
--- start ---
test child forked, pid 304726
Recording open file:
event syntax error: 'probe:vfs_getname*'
\___ unsupported tracepoint
libtraceevent is necessary for tracepoint support
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
test child finished with -1
---- end ----
Use vfs_getname probe to get syscall args filenames: FAILED!
The environment has debuginfo but is missing the libtraceevent devel.
Hence perf is compiled without libtraceevent support. The test tries to
add probe “probe:vfs_getname” and then uses it with “perf record”. This
fails at function “parse_events_add_tracepoint" due to missing
libtraceevent.
Similarly "probe libc's inet_pton & backtrace it with ping" test slso
fails with same reason.
Add a function in 'perf test shell' library to check if perf record with
—dry-run reports any error on missing support for libtraceevent. Update
both the tests to use this new function “skip_no_probe_record_support”
before proceeding With using probe point via perf builtin record.
With the change,
82: Use vfs_getname probe to get syscall args filenames :
--- start ---
test child forked, pid 305014
Recording open file:
libtraceevent is necessary for tracepoint support
test child finished with -2
---- end ----
Use vfs_getname probe to get syscall args filenames: Skip
81: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 305036
libtraceevent is necessary for tracepoint support
test child finished with -2
---- end ----
probe libc's inet_pton & backtrace it with ping: Skip
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kjain@linux.ibm.com,
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/r/20230201180421.59640-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Wed, 1 Feb 2023 18:04:20 +0000 (23:34 +0530)]
perf tests shell: Add check for perf data file in record+probe_libc_inet_pton test
The "probe libc's inet_pton & backtrace it with ping" test installs a
uprobe and uses perf record/script to check the backtrace. Currently
even if the "perf record" fails, the test reports success. Logs below:
# ./perf test -v "probe libc's inet_pton & backtrace it with ping"
81: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 304211
failed to open /tmp/perf.data.Btf: No such file or directory
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Fix this by adding check for presence of perf.data file
before proceeding with "perf script".
With the patch changes, test reports fail correctly.
# ./perf test -v "probe libc's inet_pton & backtrace it with ping"
81: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 304358
FAIL: perf record failed to create "/tmp/perf.data.Uoi"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/r/20230201180421.59640-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 31 Jan 2023 02:33:50 +0000 (18:33 -0800)]
perf test: Add pipe mode test to the Intel PT test suite
The test_pipe() function will check perf report and perf inject with
pipe input.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 31 Jan 2023 02:33:49 +0000 (18:33 -0800)]
perf session: Avoid calling lseek(2) for pipe
We should not call lseek(2) for pipes as it won't work. And we already
in the proper place to read the data for AUXTRACE. Add the comment like
in the PERF_RECORD_HEADER_TRACING_DATA.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 31 Jan 2023 02:33:48 +0000 (18:33 -0800)]
perf intel-pt: Do not try to queue auxtrace data on pipe
When it processes AUXTRACE_INFO, it calls to auxtrace_queue_data() to
collect AUXTRACE data first. That won't work with pipe since it needs
lseek() to read the scattered aux data.
$ perf record -o- -e intel_pt// true | perf report -i- --itrace=i100
# To display the perf.data header info, please use --header/--header-only options.
#
0x4118 [0xa0]: failed to process type: 70
Error:
failed to process sample
For the pipe mode, it can handle the aux data as it gets. But there's
no guarantee it can get the aux data in time. So the following warning
will be shown at the beginning:
WARNING: Intel PT with pipe mode is not recommended.
The output cannot relied upon. In particular,
time stamps and the order of events may be incorrect.
Fixes:
dbd134322e74f19d ("perf intel-pt: Add support for decoding AUX area samples")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 31 Jan 2023 02:33:47 +0000 (18:33 -0800)]
perf inject: Use perf_data__read() for auxtrace
In copy_bytes(), it reads the data from the (input) fd and writes it to
the output file. But it does with the read(2) unconditionally which
caused a problem of mixing buffered vs unbuffered I/O together.
You can see the problem when using pipes.
$ perf record -e intel_pt// -o- true | perf inject -b > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
0x45c0 [0x30]: failed to process type: 71
It should use perf_data__read() to honor the 'use_stdio' setting.
Fixes:
601366678c93618f ("perf data: Allow to use stdio functions for pipe mode")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mike Leach [Fri, 20 Jan 2023 15:37:06 +0000 (15:37 +0000)]
perf cs-etm: Update decoder code for OpenCSD version 1.4
OpenCSD version 1.4 is released with support for FEAT_ITE.
This adds a new packet type, with associated output element ID in the
packet type enum - OCSD_GEN_TRC_ELEM_INSTRUMENTATION.
As we just ignore this packet in perf, add to the switch statement to
avoid the "enum not handled in switch error", but conditionally so as
not to break the perf build for older OpenCSD installations.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120153706.20388-1-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Naveen N. Rao [Wed, 25 Jan 2023 12:34:42 +0000 (18:04 +0530)]
perf test: Fix DWARF unwind test by adding non-inline to expected function in a backtrace
'DWARF unwind' 'perf test' can sometimes fail:
$ perf test -v 74
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
74: Test dwarf unwind :
--- start ---
test child forked, pid 3785254
Problems creating module maps, continuing anyway...
Problems creating module maps, continuing anyway...
unwind: test__arch_unwind_sample:ip = 0x102d0ad4c (0x36ad4c)
unwind: access_mem addr 0x7fffc33128c8, val
1031c3228, offset 120
unwind: access_mem addr 0x7fffc33128d0, val
12427cc70, offset 128
<snip>
unwind: test_dwarf_unwind__krava_3:ip = 0x102b8768b (0x1e768b)
unwind: access_mem addr 0x7fffc3313048, val
7fffc3313050, offset 2040
unwind: access_mem addr 0x7fffc3313060, val
102b8777c, offset 2064
unwind: test_dwarf_unwind__krava_2:ip = 0x102b8770b (0x1e770b)
unwind: access_mem addr 0x7fffc3313088, val
7fffc3313090, offset 2104
unwind: access_mem addr 0x7fffc33130a0, val
102b87890, offset 2128
unwind: test_dwarf_unwind__krava_1:ip = 0x102b8777b (0x1e777b)
unwind: access_mem addr 0x7fffc3313108, val
10323a274, offset 2232
unwind: access_mem addr 0x7fffc3313110, val
ffffffffffffffff, offset 2240
unwind: access_mem addr 0x7fffc3313118, val
102c08ed0, offset 2248
unwind: access_mem addr 0x7fffc3313120, val
1031db000, offset 2256
unwind: access_mem addr 0x7fffc3313128, val
7fffc3313130, offset 2264
unwind: access_mem addr 0x7fffc3313140, val
102b45ee8, offset 2288
unwind: '':ip = 0x102b8788f (0x1e788f)
failed: got unresolved address 0x102b8788f
unwind: failed with 'no error'
got wrong number of stack entries 0 != 8
test child finished with -1
---- end ----
Test dwarf unwind: FAILED!
We expect to resolve test__dwarf_unwind as the last symbol, but that
function can be optimized away:
$ objdump -tT /usr/bin/perf | grep dwarf_unwind
000000000083b018 g DO .data
0000000000000040 Base tests__dwarf_unwind
00000000001e7750 g DF .text
0000000000000068 Base 0x60 test_dwarf_unwind__krava_1
00000000001e76e0 g DF .text
0000000000000068 Base 0x60 test_dwarf_unwind__krava_2
00000000001e7620 g DF .text
00000000000000b4 Base 0x60 test_dwarf_unwind__krava_3
00000000001e74f0 g DF .text
0000000000000128 Base 0x60 test_dwarf_unwind__compare
00000000001e7350 g DF .text
000000000000019c Base 0x60 test_dwarf_unwind__thread
000000000083b000 g DO .data
0000000000000018 Base suite__dwarf_unwind
Fix this similar to commit
fdf7c49c200d1b99 ("perf tests: Fix dwarf
unwind for stripped binaries") by marking the function as a global and
adding the 'noinline' attribute to it.
With this patch:
$ objdump -tT perf | grep dwarf_unwind
000000000083b018 g DO .data
0000000000000040 Base tests__dwarf_unwind
00000000001e80f0 g DF .text
0000000000000068 Base 0x60 test_dwarf_unwind__krava_1
00000000001e8080 g DF .text
0000000000000068 Base 0x60 test_dwarf_unwind__krava_2
00000000001e7fc0 g DF .text
00000000000000b4 Base 0x60 test_dwarf_unwind__krava_3
00000000001e7e90 g DF .text
0000000000000128 Base 0x60 test_dwarf_unwind__compare
00000000001e7cf0 g DF .text
000000000000019c Base 0x60 test_dwarf_unwind__thread
00000000001e8160 g DF .text
0000000000000248 Base 0x60 test__dwarf_unwind
000000000083b000 g DO .data
0000000000000018 Base suite__dwarf_unwind
$ ./perf test 74
74: Test dwarf unwind : Ok
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20230125123442.107156-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 20 Jan 2023 18:58:28 +0000 (10:58 -0800)]
perf buildid: Avoid copy of uninitialized memory
build_id__init() only copies the buildid data up to size leaving the
rest of the data array uninitialized. Copying the full array during
synthesis means the written event contains uninitialized memory.
Ensure the size is less that the buffer size and only copy the bytes
that were initialized. This was detected by the Clang/LLVM memory
sanitizer.
v2. Avoids the potential for copying too much as suggested by Arnaldo.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230120185828.43231-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Tue, 24 Jan 2023 14:59:29 +0000 (14:59 +0000)]
perf mem/c2c: Document that SPE is used for mem and c2c on ARM
Setup is non-trivial so also link to the full SPE docs.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-perf-users@vger.kernel.or
Link: https://lore.kernel.org/r/20230124145929.557891-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Tue, 24 Jan 2023 11:02:20 +0000 (11:02 +0000)]
perf cs-etm: Improve missing sink warning message
Make the sink error message more similar to the event error message that
reminds about missing kernel support. The available sinks are also
determined by the hardware so mention that too.
Also, usually it's not necessary to specify the sink, so add that as a
hint.
Now the error for a made up sink looks like this:
$ perf record -e cs_etm/@abc/
Couldn't find sink "abc" on event cs_etm/@abc/.
Missing kernel or device support?
Hint: An appropriate sink will be picked automatically if one isn't is specified.
For any error other than ENOENT, the same message as before is
displayed.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/ec7502e6-b406-3997-c2a5-24f98e5c4854@arm.com
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230124110220.460551-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 23 Jan 2023 17:49:18 +0000 (14:49 -0300)]
perf tools: Add Ian Rogers to MAINTAINERS as a reviewer
Ian has been reviewing perf tooling patches consistently for a long
time, so lets reflect that in the MAINTAINERS file so that contributors
add him to the CC list in patch submissions.
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Thu, 19 Jan 2023 14:27:19 +0000 (19:57 +0530)]
perf test buildid: Fix shell string substitutions
The perf test named “build id cache operations” skips with below error
on some distros:
<<>>
78: build id cache operations :
test child forked, pid 111101
WARNING: wine not found. PE binaries will not be run.
test binaries: /tmp/perf.ex.SHA1.PKz /tmp/perf.ex.MD5.Gt3 ./tests/shell/../pe-file.exe
DEBUGINFOD_URLS=
Adding
4abd406f041feb4f10ecde3fc30fd0639e1a91cb /tmp/perf.ex.SHA1.PKz: Ok
build id:
4abd406f041feb4f10ecde3fc30fd0639e1a91cb
./tests/shell/buildid.sh: 69: ./tests/shell/buildid.sh: Bad substitution
test child finished with -2
build id cache operations: Skip
<<>>
The test script "tests/shell/buildid.sh" uses some of the string
substitution ways which are supported in bash, but not in "sh" or other
shells. Above error on line number 69 that reports "Bad substitution"
is:
<<>>
link=${build_id_dir}/.build-id/${id:0:2}/${id:2}
<<>>
Here the way of getting first two characters from id ie, ${id:0:2} and
similarly expressions like ${id:2} is not recognised in "sh". So the
line errors and instead of hitting failure, the test gets skipped as
shown in logs. So the syntax issue causes test not to be executed in
such cases. Similarly usage : "${@: -1}" [ to pick last argument passed
to a function] in “test_record” doesn’t work in all distros.
Fix this by using alternative way with shell substitution to pick
required characters from the string. Also fix the usage of “${@: -1}” to
work in all cases.
Another usage in “test_record” is:
<<>>
${perf} record --buildid-all -o ${data} $@ &> ${log}
<<>>
This causes the 'perf record' to start in background and Results in the
data file not being created by the time "check" function is invoked.
Below log shows 'perf record' result getting displayed after the call to
"check" function.
<<>>
running: perf record /tmp/perf.ex.SHA1.EAU
build id:
4abd406f041feb4f10ecde3fc30fd0639e1a91cb
link: /tmp/perf.debug.mLT/.build-id/4a/
bd406f041feb4f10ecde3fc30fd0639e1a91cb
failed: link /tmp/perf.debug.mLT/.build-id/4a/
bd406f041feb4f10ecde3fc30fd0639e1a91cb does not exist
test child finished with -1
build id cache operations: FAILED!
root@machine:~/athira/linux/tools/perf# Couldn't synthesize bpf events.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.010 MB /tmp/perf.data.bFF ]
<<>>
Fix this by redirecting output instead of using “&” which starts the
command in background.
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230119142719.32628-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Diederik de Haas [Sun, 22 Jan 2023 12:20:32 +0000 (13:20 +0100)]
perf: Various spelling fixes
Fix various spelling errors as reported by Debian's lintian tool.
"amount of times" -> "number of times"
ocurrence -> occurrence
upto -> up to
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230122122034.48020-1-didi.debian@cknow.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Naveen N. Rao [Mon, 23 Jan 2023 08:32:24 +0000 (14:02 +0530)]
perf test: Switch basic bpf filtering test to use syscall tracepoint
BPF filtering tests can sometime fail. Running the test in verbose mode
shows the following:
$ sudo perf test 42
42: BPF filter :
42.1: Basic BPF filtering : FAILED!
42.2: BPF pinning : Skip
42.3: BPF prologue generation : Skip
$ perf --version
perf version 4.18.0-425.3.1.el8.ppc64le
$ sudo perf test -v 42
42: BPF filter :
42.1: Basic BPF filtering :
--- start ---
test child forked, pid 711060
...
bpf: config 'func=do_epoll_wait' is ok
Looking at the vmlinux_path (8 entries long)
Using /usr/lib/debug/lib/modules/4.18.0-425.3.1.el8.ppc64le/vmlinux for symbols
Open Debuginfo file: /usr/lib/debug/.build-id/81/
56f5a07f92ccb62c5600ba0e4aacfb5f3a7534.debug
Try to find probe point from debuginfo.
Matched function: do_epoll_wait [4ef8cb0]
found inline addr: 0xc00000000061dbe4
Probe point found: __se_compat_sys_epoll_pwait+196
found inline addr: 0xc00000000061d9f4
Probe point found: __se_sys_epoll_pwait+196
found inline addr: 0xc00000000061d824
Probe point found: __se_sys_epoll_wait+36
Found 3 probe_trace_events.
Opening /sys/kernel/tracing//kprobe_events write=1
...
BPF filter result incorrect, expected 56, got 56 samples
test child finished with -1
---- end ----
BPF filter subtest 1: FAILED!
The statement above about the result being incorrect looks weird, and it
is due to that particular perf build missing commit
3e11300cdfd5f1
("perf test: Fix bpf test sample mismatch reporting"). In reality, due
to commit
4b04e0decd2518 ("perf test: Fix basic bpf filtering test"),
perf expects there to be 56*3 samples.
However, the number of samples we receive is going to be dependent on
where the probes are installed, which is dependent on where
do_epoll_wait gets inlined. On s390x, it looks like probes at all the
inlined locations are hit. But, that is not the case on ppc64le.
Fix this by switching the test to instead use the syscall tracepoint.
This ensures that we will only ever install a single event enabling us
to reliably determine the sample count.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20230123083224.276404-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 23 Jan 2023 12:56:00 +0000 (09:56 -0300)]
Merge remote-tracking branch 'torvalds/master' into perf/core
To pick fixes that went via perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Fri, 20 Jan 2023 14:37:01 +0000 (14:37 +0000)]
perf cs-etm: Ensure that Coresight timestamps don't go backwards
There are some edge cases around estimated timestamps that can result
in them going backwards.
One is that after a discontinuity, the last used timestamp is set to 0.
The duration of the next range is then subtracted which could result in
an earlier timestamp than the last instruction. Fix this by not
resetting the last timestamp used on a discontinuity, and make sure that
new estimated timestamps are clamped to be later than that.
Another case is that estimated timestamps could compound over time to
end up being more than the next real timestamp in the trace. Fix this by
clamping the estimates in cs_etm_decoder__do_soft_timestamp() to be no
later than it.
cs_etm_decoder__do_soft_timestamp() also updated next_cs_timestamp,
which meant that the next real timestamp was lost and not stored
anywhere. Fix that by only updating cs_timestamp for estimates and keep
next_cs_timestamp untouched.
Finally, use next_cs_timestamp to signify if a timestamp has been
received previously. Because cs_timestamp has the first range
subtracted, it could technically go to 0 which would break the logic.
Testing
=======
It can be verified that timestamps don't go backwards when tracing on a
single core with the following commands. Across multiple cores it's
expected that timestamps are interleaved:
$ perf record -e cs_etm/@tmc_etr0/k -C 4 taskset -c 4 sleep 1
$ perf script --itrace=i1ns --ns -Fcomm,tid,pid,time,cpu,event,ip,sym,addr,symoff,flags,callindent > itrace
$ sed 's/://g' itrace | awk -F ' ' ' { print $4 } ' | awk '{ if ($1 < prev) { print "line:" NR " " $0 } {prev=$1}}'
Reported-by: Tanmay Jagdale <tanmay@marvell.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-9-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Fri, 20 Jan 2023 14:37:00 +0000 (14:37 +0000)]
perf cs_etm: Set the time field in the synthetic samples
If virtual timestamps are detected, set sample time field accordingly,
otherwise warn the user that the samples will not include accurate
time data.
| Test notes (FEAT_TRF platform)
|
| $ ./perf record -e cs_etm//u -a -- sleep 4
| $ ./perf script --fields +time
| perf 422 [000] 163.375100: 1 branches:uH: 0 [unknown] ([unknown])
| perf 422 [000] 163.375100: 1 branches:uH:
ffffb8009544 ioctl+0x14 (/lib/aarch64-linux-gnu/libc-2.27.so)
| perf 422 [000] 163.375100: 1 branches:uH:
aaaaab6bebf4 perf_evsel__run_ioctl+0x90 (/home/german/linux/tools/perf/perf)
| [...]
| perf 422 [000] 167.393100: 1 branches:uH:
aaaaab6bda00 __xyarray__entry+0x74 (/home/german/linux/tools/perf/perf)
| perf 422 [000] 167.393099: 1 branches:uH:
aaaaab6bda0c __xyarray__entry+0x80 (/home/german/linux/tools/perf/perf)
| perf 422 [000] 167.393099: 1 branches:uH:
ffffb8009538 ioctl+0x8 (/lib/aarch64-linux-gnu/libc-2.27.so)
|
| The time from the first sample to the last sample is 4 seconds
Now that times are converted to nanoseconds, also try to estimate the
timestamps more accurately be dividing by some fixed value for
instructions per ns. This prevents long ranges from being estimated
too far in the past than would be realistic.
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-8-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Fri, 20 Jan 2023 14:36:59 +0000 (14:36 +0000)]
perf cs_etm: Record ts_source in AUXTRACE_INFO for ETMv4 and ETE
Read the value of ts_source exposed by the driver and store it in the
ETMv4 and ETE header. If the interface doesn't exist (such as in older
Kernels), defaults to a safe value of -1.
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-7-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Fri, 20 Jan 2023 14:36:58 +0000 (14:36 +0000)]
perf cs_etm: Keep separate symbols for ETMv4 and ETE parameters
Previously, adding a new parameter at the end of ETMv4 meant adding it
somewhere in the middle of ETE, which is not supported by the current
header version.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-6-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Fri, 20 Jan 2023 14:36:57 +0000 (14:36 +0000)]
perf pmu: Add function to check if a pmu file exists
Add a utility function perf_pmu__file_exists() to check if a given pmu
file exists in the sysfs filesystem.
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-5-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Fri, 20 Jan 2023 14:36:56 +0000 (14:36 +0000)]
perf pmu: Remove remaining duplication of bus/event_source/devices/...
Use the new perf_pmu__pathname_scnprintf() instead. No functional
changes.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Fri, 20 Jan 2023 14:36:55 +0000 (14:36 +0000)]
perf pmu: Use perf_pmu__open_file() and perf_pmu__scan_file()
Remove some code that duplicates existing methods. Copy strings where
const strings are required.
No functional changes.
Committer notes:
Add a stub for erf_pmu__scan_file() in tools/perf/util/python.c not to
drag tools/perf/util/pmu.c into the python binding.
This fixes 'perf test python' at this point in this patchset.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Fri, 20 Jan 2023 14:36:54 +0000 (14:36 +0000)]
perf pmu: Remove duplication around EVENT_SOURCE_DEVICE_PATH
The pattern for accessing EVENT_SOURCE_DEVICE_PATH is duplicated in a
few places, so add two utility functions to cover it. Also just use
perf_pmu__scan_file() instead of pmu_type() which already does the same
thing.
No functional changes.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 19 Jan 2023 20:10:36 +0000 (12:10 -0800)]
perf tools: Fix foolproof typo
In the context of LBR stitching documentation.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20230119201036.156441-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 20 Jan 2023 12:34:56 +0000 (14:34 +0200)]
perf symbols: Check SHT_RELA and SHT_REL type earlier
Make the code more readable by checking for SHT_RELA and SHT_REL type
earlier.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230120123456.12449-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 20 Jan 2023 12:34:55 +0000 (14:34 +0200)]
perf symbols: Combine handling for SHT_RELA and SHT_REL
SHT_REL and SHT_RELA are handled the same way. Simplify by combining the
handling.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230120123456.12449-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 20 Jan 2023 12:34:54 +0000 (14:34 +0200)]
perf symbols: Allow for .plt entries with no symbol
Create a sensible name for .plt entries with no symbol.
Example:
Before:
$ perf test --dso /usr/lib/x86_64-linux-gnu/libc.so.6 -vv Symbols 2>/tmp/cmp1.txt
After:
$ perf test --dso /usr/lib/x86_64-linux-gnu/libc.so.6 -vv Symbols 2>/tmp/cmp2.txt
$ diff /tmp/cmp1.txt /tmp/cmp2.txt
4c4
< test child forked, pid 53043
---
> test child forked, pid 54372
23,62c23,62
< 280f0-28100 g @plt
< 28100-28110 g @plt
< 28110-28120 g @plt
< 28120-28130 g @plt
< 28130-28140 g @plt
< 28140-28150 g @plt
< 28150-28160 g @plt
< 28160-28170 g @plt
< 28170-28180 g @plt
< 28180-28190 g @plt
< 28190-281a0 g @plt
< 281a0-281b0 g @plt
< 281b0-281c0 g @plt
< 281c0-281d0 g @plt
< 281d0-281e0 g @plt
< 281e0-281f0 g @plt
< 281f0-28200 g @plt
< 28200-28210 g @plt
< 28210-28220 g @plt
< 28220-28230 g @plt
< 28230-28240 g @plt
< 28240-28250 g @plt
< 28250-28260 g @plt
< 28260-28270 g @plt
< 28270-28280 g @plt
< 28280-28290 g @plt
< 28290-282a0 g @plt
< 282a0-282b0 g @plt
< 282b0-282c0 g @plt
< 282c0-282d0 g @plt
< 282d0-282e0 g @plt
< 282e0-282f0 g @plt
< 282f0-28300 g @plt
< 28300-28310 g @plt
< 28310-28320 g @plt
< 28320-28330 g @plt
< 28330-28340 g @plt
< 28340-28350 g @plt
< 28350-28360 g @plt
< 28360-28370 g @plt
---
> 280f0-28100 g offset_0x280f0@plt
> 28100-28110 g offset_0x28100@plt
> 28110-28120 g offset_0x28110@plt
> 28120-28130 g offset_0x28120@plt
> 28130-28140 g offset_0x28130@plt
> 28140-28150 g offset_0x28140@plt
> 28150-28160 g offset_0x28150@plt
> 28160-28170 g offset_0x28160@plt
> 28170-28180 g offset_0x28170@plt
> 28180-28190 g offset_0x28180@plt
> 28190-281a0 g offset_0x28190@plt
> 281a0-281b0 g offset_0x281a0@plt
> 281b0-281c0 g offset_0x281b0@plt
> 281c0-281d0 g offset_0x281c0@plt
> 281d0-281e0 g offset_0x281d0@plt
> 281e0-281f0 g offset_0x281e0@plt
> 281f0-28200 g offset_0x281f0@plt
> 28200-28210 g offset_0x28200@plt
> 28210-28220 g offset_0x28210@plt
> 28220-28230 g offset_0x28220@plt
> 28230-28240 g offset_0x28230@plt
> 28240-28250 g offset_0x28240@plt
> 28250-28260 g offset_0x28250@plt
> 28260-28270 g offset_0x28260@plt
> 28270-28280 g offset_0x28270@plt
> 28280-28290 g offset_0x28280@plt
> 28290-282a0 g offset_0x28290@plt
> 282a0-282b0 g offset_0x282a0@plt
> 282b0-282c0 g offset_0x282b0@plt
> 282c0-282d0 g offset_0x282c0@plt
> 282d0-282e0 g offset_0x282d0@plt
> 282e0-282f0 g offset_0x282e0@plt
> 282f0-28300 g offset_0x282f0@plt
> 28300-28310 g offset_0x28300@plt
> 28310-28320 g offset_0x28310@plt
> 28320-28330 g offset_0x28320@plt
> 28330-28340 g offset_0x28330@plt
> 28340-28350 g offset_0x28340@plt
> 28350-28360 g offset_0x28350@plt
> 28360-28370 g offset_0x28360@plt
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230120123456.12449-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 20 Jan 2023 12:34:53 +0000 (14:34 +0200)]
perf symbols: Add symbol for .plt header
perf expands the _init symbol over .plt because there are no PLT symbols
at that point, but then dso__synthesize_plt_symbols() creates them.
Fix by truncating the previous symbol and inserting a symbol for .plt
header.
Example:
Before:
$ perf test --dso `which uname` -v Symbols
74: Symbols :
--- start ---
test child forked, pid 191028
Problems creating module maps, continuing anyway...
Testing /usr/bin/uname
Overlapping symbols:
2000-25f0 g _init
2040-2050 g free@plt
test child finished with -1
---- end ----
Symbols: FAILED!
$ perf test --dso `which uname` -vv Symbols 2>/tmp/cmp1.txt
After:
$ perf test --dso `which uname` -v Symbols
74: Symbols :
--- start ---
test child forked, pid 194291
Testing /usr/bin/uname
test child finished with 0
---- end ----
Symbols: Ok
$ perf test --dso `which uname` -vv Symbols 2>/tmp/cmp2.txt
$ diff /tmp/cmp1.txt /tmp/cmp2.txt
4,5c4
< test child forked, pid 191031
< Problems creating module maps, continuing anyway...
---
> test child forked, pid 194296
9c8,9
< 2000-25f0 g _init
---
> 2000-2030 g _init
> 2030-2040 g .plt
100,103c100
< Overlapping symbols:
< 2000-25f0 g _init
< 2040-2050 g free@plt
< test child finished with -1
---
> test child finished with 0
105c102
< Symbols: FAILED!
---
> Symbols: Ok
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230120123456.12449-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 20 Jan 2023 12:34:52 +0000 (14:34 +0200)]
perf symbols: Do not check ss->dynsym twice
ss->dynsym is checked to be not NULL twice. Remove the first check
because, in fact, there can be a plt with no dynsym, which is something
that will be dealt with later.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230120123456.12449-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 20 Jan 2023 12:34:51 +0000 (14:34 +0200)]
perf symbols: Slightly simplify 'err' usage in dso__synthesize_plt_symbols()
Return zero directly instead of needless 'goto out_elf_end' that does
the same thing. That allows 'err' to be initialized to -1 instead of
having to change its value later.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230120123456.12449-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 20 Jan 2023 12:34:50 +0000 (14:34 +0200)]
perf symbols: Add dso__find_symbol_nocache()
Symbols should not be cached when there are more symbols still to add.
Add dso__find_symbol_nocache() to facilitate that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230120123456.12449-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 20 Jan 2023 12:34:49 +0000 (14:34 +0200)]
perf symbols: Check plt_entry_size is not zero
The code expects non-zero plt_entry_size. Check it and add a debug
message to print if it is zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230120123456.12449-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 20 Jan 2023 12:34:48 +0000 (14:34 +0200)]
perf symbols: Factor out get_plt_sizes()
Factor out get_plt_sizes() to make the code more readable and further
changes to dso__synthesize_plt_symbols() easier to follow.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230120123456.12449-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 20 Jan 2023 12:34:47 +0000 (14:34 +0200)]
perf test: Add Symbols test
Add a test to check function symbols do not overlap and are not zero
length.
The main motivation for the test is to make it easier to review changes
to PLT symbol synthesis i.e. changes to dso__synthesize_plt_symbols().
By default the test uses the perf executable as a test DSO, but a
specific DSO can be specified via a new perf test option "--dso".
The test is useful in the following ways:
- Any DSO can be tested, even ones that do not run on the current
architecture. For example, using cross-compiled DSOs to see how
well perf handles different architectures.
- With verbose > 1 (e.g. -vv), all the symbols are printed, which
makes it easier to see issues.
- perf removes duplicate symbols and expands zero-length symbols
to reach the next symbol, however that is done before adding
synthesized symbols, so the test is checking those also.
Example:
$ perf test -v Symbols
74: Symbols :
--- start ---
test child forked, pid 154918
Testing /home/user/bin/perf
Overlapping symbols:
7d000-7f3a0 g _init
7d030-7d040 g __printf_chk@plt
test child finished with -1
---- end ----
Symbols: FAILED!
Note the test fails because perf expands the _init symbol over the PLT
because there are no PLT symbols at that point, but then
dso__synthesize_plt_symbols() creates them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230120123456.12449-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sun, 22 Jan 2023 20:14:58 +0000 (12:14 -0800)]
Merge tag 'sched_urgent_for_v6.2_rc6' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the scheduler doesn't use stale frequency scaling values
when latter get disabled due to a value error
- Fix a NULL pointer access on UP configs
- Use the proper locking when updating CPU capacity
* tag 'sched_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/aperfmperf: Erase stale arch_freq_scale values when disabling frequency invariance readings
sched/core: Fix NULL pointer access fault in sched_setaffinity() with non-SMP configs
sched/fair: Fixes for capacity inversion detection
sched/uclamp: Fix a uninitialized variable warnings
Linus Torvalds [Sun, 22 Jan 2023 20:10:47 +0000 (12:10 -0800)]
Merge tag 'edac_urgent_for_v6.2_rc6' of git://git./linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Respect user-supplied polling value in the EDAC device code
- Fix a use-after-free issue in qcom_edac
* tag 'edac_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info
EDAC/device: Respect any driver-supplied workqueue polling value
Linus Torvalds [Sun, 22 Jan 2023 20:06:18 +0000 (12:06 -0800)]
Merge tag 'perf_urgent_for_v6.2_rc6' of git://git./linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Add Emerald Rapids model support to more perf machinery
* tag 'perf_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/cstate: Add Emerald Rapids
perf/x86/intel: Add Emerald Rapids
Linus Torvalds [Sun, 22 Jan 2023 19:56:33 +0000 (11:56 -0800)]
Merge tag 'gfs2-v6.2-rc4-fix' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 writepage fix from Andreas Gruenbacher:
- Fix a regression introduced by commit "gfs2: stop using
generic_writepages in gfs2_ail1_start_one".
* tag 'gfs2-v6.2-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: stop using generic_writepages in gfs2_ail1_start_one"
Andreas Gruenbacher [Thu, 19 Jan 2023 19:14:42 +0000 (20:14 +0100)]
Revert "gfs2: stop using generic_writepages in gfs2_ail1_start_one"
Commit
b2b0a5e97855 switched from generic_writepages() to
filemap_fdatawrite_wbc() in gfs2_ail1_start_one() on the path to
replacing ->writepage() with ->writepages() and eventually eliminating
the former. Function gfs2_ail1_start_one() is called from
gfs2_log_flush(), our main function for flushing the filesystem log.
Unfortunately, at least as implemented today, ->writepage() and
->writepages() are entirely different operations for journaled data
inodes: while the former creates and submits transactions covering the
data to be written, the latter flushes dirty buffers out to disk.
With gfs2_ail1_start_one() now calling ->writepages(), we end up
creating filesystem transactions while we are in the course of a log
flush, which immediately deadlocks on the sdp->sd_log_flush_lock
semaphore.
Work around that by going back to how things used to work before commit
b2b0a5e97855 for now; figuring out a superior solution will take time we
don't have available right now. However ...
Since the removal of generic_writepages() is imminent, open-code it
here. We're already inside a blk_start_plug() ... blk_finish_plug()
section here, so skip that part of the original generic_writepages().
This reverts commit
b2b0a5e978552e348f85ad9c7568b630a5ede659.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Linus Torvalds [Sun, 22 Jan 2023 00:27:01 +0000 (16:27 -0800)]
Linux 6.2-rc5
Linus Torvalds [Sun, 22 Jan 2023 00:21:56 +0000 (16:21 -0800)]
Merge tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux
Pull another io_uring fix from Jens Axboe:
"Just a single fix for a regression that happened in this release due
to a poll change. Normally I would've just deferred it to next week,
but since the original fix got picked up by stable, I think it's
better to just send this one off separately.
The issue is around the poll race fix, and how it mistakenly also got
applied to multishot polling. Those don't need the race fix, and we
should not be doing any reissues for that case. Exhaustive test cases
were written and committed to the liburing regression suite for the
reported issue, and additions for similar issues"
* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
io_uring/poll: don't reissue in case of poll race on multishot request
Linus Torvalds [Sat, 21 Jan 2023 19:20:55 +0000 (11:20 -0800)]
Merge tag 'char-misc-6.2-rc5' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other subsystem driver fixes for
6.2-rc5 to resolve a few reported issues. They include:
- long time pending fastrpc fixes (should have gone into 6.1, my
fault)
- mei driver/bus fixes and new device ids
- interconnect driver fixes for reported problems
- vmci bugfix
- w1 driver bugfixes for reported problems
Almost all of these have been in linux-next with no reported problems,
the rest have all passed 0-day bot testing in my tree and on the
mailing lists where they have sat too long due to me taking a long
time to catch up on my pending patch queue"
* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
VMCI: Use threaded irqs instead of tasklets
misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
gsmi: fix null-deref in gsmi_get_variable
misc: fastrpc: Fix use-after-free race condition for maps
misc: fastrpc: Don't remove map on creater_process and device_release
misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
misc: fastrpc: fix error code in fastrpc_req_mmap()
mei: me: add meteor lake point M DID
mei: bus: fix unlink on bus in error path
w1: fix WARNING after calling w1_process()
w1: fix deadloop in __w1_remove_master_device()
comedi: adv_pci1760: Fix PWM instruction handling
interconnect: qcom: rpm: Use _optional func for provider clocks
interconnect: qcom: msm8996: Fix regmap max_register values
interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
Linus Torvalds [Sat, 21 Jan 2023 19:17:23 +0000 (11:17 -0800)]
Merge tag 'driver-core-6.2-rc5' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver and kernel core fixes for 6.2-rc5. They
include:
- potential gadget fixup in do_prlimit
- device property refcount leak fix
- test_async_probe bugfix for reported problem"
* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
prlimit: do_prlimit needs to have a speculation check
driver core: Fix test_async_probe_init saves device in wrong array
device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()
Linus Torvalds [Sat, 21 Jan 2023 19:15:21 +0000 (11:15 -0800)]
Merge tag 'staging-6.2-rc5' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.2-rc5. It resolves a build
issue reported and Fixed by Arnd in the vc04_services driver. It's
been in linux-next this week with no reported problems"
* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: fix enum vchiq_status return types
Linus Torvalds [Sat, 21 Jan 2023 19:12:42 +0000 (11:12 -0800)]
Merge tag 'tty-6.2-rc5' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.2-rc5 that
resolve a number of tiny reported issues and some new device ids. They
include:
- new device id for the exar serial driver
- speakup tty driver bugfix
- atmel serial driver baudrate fixup
- stm32 serial driver bugfix and then revert as the bugfix broke the
build. That will come back in a later pull request once it is all
worked out properly.
- amba-pl011 serial driver rs486 mode bugfix
- qcom_geni serial driver bugfix
Most of these have been in linux-next with no reported problems (well,
other than the build breakage which generated the revert), the new
device id passed 0-day testing"
* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: exar: Add support for Sealevel 7xxxC serial cards
Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
tty: serial: qcom_geni: avoid duplicate struct member init
serial: atmel: fix incorrect baudrate setup
tty: fix possible null-ptr-defer in spk_ttyio_release
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
serial: amba-pl011: fix high priority character transmission in rs486 mode
serial: pch_uart: Pass correct sg to dma_unmap_sg()
tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
Linus Torvalds [Sat, 21 Jan 2023 19:10:03 +0000 (11:10 -0800)]
Merge tag 'usb-6.2-rc5' of git://git./linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of small USB and Thunderbolt driver fixes and new
device id changes for 6.2-rc5. Included in here are:
- thunderbolt bugfixes for reported problems
- new usb-serial driver ids added
- onboard_hub usb driver fixes for much-reported problems
- xhci bugfixes
- typec bugfixes
- ehci-fsl driver module alias fix
- iowarrior header size fix
- usb gadget driver fixes
All of these, except for the iowarrior fix, have been in linux-next
with no reported issues. The iowarrior fix passed the 0-day testing
and is a one digit change based on a reported problem in the driver
(which was written to a spec, not the real device that is now
available)"
* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
usb: host: ehci-fsl: Fix module alias
usb: dwc3: fix extcon dependency
usb: core: hub: disable autosuspend for TI TUSB8041
USB: fix misleading usb_set_intfdata() kernel doc
usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
USB: gadget: Add ID numbers to configfs-gadget driver names
usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
usb: gadget: g_webcam: Send color matching descriptor per frame
usb: typec: altmodes/displayport: Use proper macro for pin assignment check
usb: typec: altmodes/displayport: Fix pin assignment calculation
usb: typec: altmodes/displayport: Add pin assignment helper
usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
usb: misc: onboard_hub: Move 'attach' work to the driver
usb: misc: onboard_hub: Invert driver registration order
usb: ucsi: Ensure connector delayed work items are flushed
usb: musb: fix error return code in omap2430_probe()
usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
...
Linus Torvalds [Sat, 21 Jan 2023 18:56:37 +0000 (10:56 -0800)]
Merge tag 'kbuild-fixes-v6.2-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
messages when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: explicitly validate existence of cpio command
scripts: support GNU make 4.4 in jobserver-exec
kconfig: Update all declared targets
scripts: rpm: make clear that mkspec script contains 4.13 feature
init/Kconfig: fix LOCALVERSION_AUTO help text
kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
init/version-timestamp.c: remove unneeded #include <linux/version.h>
docs: kbuild: remove mention to dropped $(objtree) feature
Linus Torvalds [Wed, 18 Jan 2023 04:27:23 +0000 (20:27 -0800)]
ext4: deal with legacy signed xattr name hash values
We potentially have old hashes of the xattr names generated on systems
with signed 'char' types. Now that everybody uses '-funsigned-char',
those hashes will no longer match.
This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.
Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c06dd0 ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Kroah-Hartman [Fri, 20 Jan 2023 10:03:20 +0000 (11:03 +0100)]
prlimit: do_prlimit needs to have a speculation check
do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced. In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Tested-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 21 Jan 2023 01:13:55 +0000 (17:13 -0800)]
Merge tag 'gpio-fixes-for-v6.2-rc5' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential race condition and always set GPIOs used as interrupt
source to input in gpio-mxc
- fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU
* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
Linus Torvalds [Fri, 20 Jan 2023 22:28:49 +0000 (14:28 -0800)]
Merge tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- important fix for packet signature calculation error
- three fixes to correct DFS deadlock, and DFS refresh problem
- remove an unused DFS function, and duplicate tcon refresh code
- DFS cache lookup fix
- uninitialized rc fix
* tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: remove unused function
cifs: do not include page data when checking signature
cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()
cifs: handle cache lookup errors different than -ENOENT
cifs: remove duplicate code in __refresh_tcon()
cifs: don't take exclusive lock for updating target hints
cifs: avoid re-lookups in dfs_cache_find()
cifs: fix potential deadlock in cache_refresh_path()
Linus Torvalds [Fri, 20 Jan 2023 22:22:56 +0000 (14:22 -0800)]
Merge tag 'pinctrl-v6.2-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Compilation fix for Sunplus sp7021
- Add some missing headers after a cleanup to the Nomadik driver
- Fix pull type and mux routes on Rockchip RK3568
* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: rockchip: fix mux route data for rk3568
pinctrl: rockchip: fix reading pull type on rk3568
pinctrl: nomadik: Add missing header(s)
pinctrl: sp7021: fix unused function warning
Linus Torvalds [Fri, 20 Jan 2023 22:15:51 +0000 (14:15 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Several hfi1 patches fixing some long standing driver bugs
- Overflow when working with sg lists with elements greater than 4G
- An rxe regression with object numbering after the mrs reach their
limit
- A theoretical problem with the scatterlist merging code
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
lib/scatterlist: Fix to calculate the last_pg properly
IB/hfi1: Remove user expected buffer invalidate race
IB/hfi1: Immediately remove invalid memory from hardware
IB/hfi1: Fix expected receive setup error exit issues
IB/hfi1: Reserve user expected TIDs
IB/hfi1: Reject a zero-length user expected buffer
RDMA/core: Fix ib block iterator counter overflow
RDMA/rxe: Prevent faulty rkey generation
RDMA/rxe: Fix inaccurate constants in rxe_type_info
Jens Axboe [Fri, 20 Jan 2023 22:08:21 +0000 (15:08 -0700)]
io_uring/poll: don't reissue in case of poll race on multishot request
A previous commit fixed a poll race that can occur, but it's only
applicable for multishot requests. For a multishot request, we can safely
ignore a spurious wakeup, as we never leave the waitqueue to begin with.
A blunt reissue of a multishot armed request can cause us to leak a
buffer, if they are ring provided. While this seems like a bug in itself,
it's not really defined behavior to reissue a multishot request directly.
It's less efficient to do so as well, and not required to rearm anything
like it is for singleshot poll requests.
Cc: stable@vger.kernel.org
Fixes:
6e5aedb9324a ("io_uring/poll: attempt request issue after racy poll wakeup")
Reported-and-tested-by: Olivier Langlois <olivier@trillion01.com>
Link: https://github.com/axboe/liburing/issues/778
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 20 Jan 2023 20:44:41 +0000 (12:44 -0800)]
Merge tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Various little tweaks all over the place:
- NVMe pull request via Christoph:
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)
- Fix a bug in the read request side request allocation caching
(Pavel)
- pktcdvd was brought back after we configured a NULL return on bio
splits, make it consistent with the others (me)
- BFQ refcount fix (Yu)
- Block cgroup policy activation fix (Yu)
- Fix for an md regression introduced in the 6.2 cycle (Adrian)"
* tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
block: fix hctx checks for batch allocation
block/rnbd-clt: fix wrong max ID in ida_alloc_max
blk-cgroup: fix missing pd_online_fn() while activating policy
pktcdvd: check for NULL returna fter calling bio_split_to_limits()
block, bfq: switch 'bfqg->ref' to use atomic refcount apis
md: fix incorrect declaration about claim_rdev in md_import_device
Linus Torvalds [Fri, 20 Jan 2023 20:39:45 +0000 (12:39 -0800)]
Merge tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Fixes for the MSG_RING opcode. Nothing really major:
- Fix an overflow missing serialization around posting CQEs to the
target ring (me)
- Disable MSG_RING on a ring that isn't enabled yet. There's nothing
really wrong with allowing it, but 1) it's somewhat odd as nobody
can receive them yet, and 2) it means that using the right delivery
mechanism might change. As nobody should be sending CQEs to a ring
that isn't enabled yet, let's just disable it (Pavel)
- Tweak to when we decide to post remotely or not for MSG_RING
(Pavel)"
* tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux:
io_uring/msg_ring: fix remote queue to disabled ring
io_uring/msg_ring: fix flagging remote execution
io_uring/msg_ring: fix missing lock on overflow for IOPOLL
io_uring/msg_ring: move double lock/unlock helpers higher up
Linus Torvalds [Fri, 20 Jan 2023 19:59:01 +0000 (11:59 -0800)]
Merge tag 'for-6.2-rc4-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential out-of-bounds access to leaf data when seeking in an
inline file
- fix potential crash in quota when rescan races with disable
- reimplement super block signature scratching by marking page/folio
dirty and syncing block device, allow removing write_one_page
* tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between quota rescan and disable leading to NULL pointer deref
btrfs: fix invalid leaf access due to inline extent during lseek
btrfs: stop using write_one_page in btrfs_scratch_superblock
btrfs: factor out scratching of one regular super block
Linus Torvalds [Fri, 20 Jan 2023 19:35:21 +0000 (11:35 -0800)]
Merge tag 'linux-kselftest-fixes-6.2-rc5' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"Fix an error seen during unconfigured LLVM builds"
* tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: Fix error message for unconfigured LLVM builds
Linus Torvalds [Fri, 20 Jan 2023 19:14:41 +0000 (11:14 -0800)]
Merge tag 'thermal-6.2-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Modify __thermal_cooling_device_register() to make it call
put_device() after invoking device_register() and fix up a few error
paths calling thermal_cooling_device_destroy_sysfs() unnecessarily
(Viresh Kumar)"
* tag 'thermal-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: call put_device() only after device_register() fails
Linus Torvalds [Fri, 20 Jan 2023 19:11:35 +0000 (11:11 -0800)]
Merge tag 'acpi-6.2-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These update the ACPICA entry in MAINTAINERS, add a backlight handling
quirk and fix the ACPI PRM (platform runtime) mechanism support.
Specifics:
- Update the ACPICA development list address in MAINTAINERS to the
new one that does not bounce (Rafael Wysocki)
- Check whether EFI runtime is available when registering the ACPI
PRM address space handler and when running it (Ard Biesheuvel)
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede)"
* tag 'acpi-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Check whether EFI runtime is available
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
MAINTAINERS: Update the ACPICA development list address
Linus Torvalds [Fri, 20 Jan 2023 19:04:59 +0000 (11:04 -0800)]
Merge tag 'mmc-v6.2-rc2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sunxi-mmc: Fix clock refcount imbalance during unbind
- sdhci-esdhc-imx: Fix some tuning settings
* tag 'mmc-v6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sunxi-mmc: Fix clock refcount imbalance during unbind
mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting
Linus Torvalds [Fri, 20 Jan 2023 19:00:03 +0000 (11:00 -0800)]
Merge tag 'soc-fixes-6.2' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC DT and driver fixes from Arnd Bergmann:
"Lots of dts fixes for Qualcomm Snapdragon and NXP i.MX platforms,
including:
- A regression fix for SDHCI controllers on Inforce 6540, and another
SDHCI fix on SM8350
- Reenable cluster idle on sm8250 after the the code fix is upstream
- multiple fixes for the QMP PHY binding, needing an incompatible dt
change
- The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus
6P, to avoid instabilities caused by use of protected memory
regions
- Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
clock error
- A couple of verdin-imx8mm DT fixes for audio playback support
- Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees
- Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
eMMC CMD8 CRC error in HS400ES/HS400 mode
The remaining ARM and RISC-V platforms only have very few smaller dts
bugfixes this time:
- A fix for the SiFive unmatched board's PCI memory space
- A revert to fix a regression with GPIO on Marvell Armada
- A fix for the UART address on Marvell AC5
- Missing chip-select phandles for stm32 boards
- Selecting the correct clock for the sam9x60 memory controller
- Amlogic based Odroid-HC4 needs a revert to restore USB
functionality.
And finally, there are some minor code fixes:
- Build fixes for OMAP1, pxa, riscpc, raspberry pi firmware, and zynq
firmware
- memory controller driver fixes for an OMAP regression and older
bugs on tegra, atmel and mvebu
- reset controller fixes for ti-sci and uniphier platforms
- ARM SCMI firmware fixes for a couple of rare corner cases
- Qualcomm platform driver fixes for incorrect error handling and a
backwards compatibility fix for the apr driver using older dtb
- NXP i.MX SoC driver fixes for HDMI output, error handling in the
imx8 soc-id and missing reference counting on older cpuid code"
* tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (60 commits)
firmware: zynqmp: fix declarations for gcc-13
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60
ARM: omap1: fix building gpio15xx
ARM: omap1: fix !ARCH_OMAP1_ANY link failures
firmware: raspberrypi: Fix type assignment
arm64: dts: qcom: msm8992-libra: Fix the memory map
arm64: dts: qcom: msm8992: Don't use sfpb mutex
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
arm64: dts: msm8994-angler: fix the memory map
arm64: dts: marvell: AC5/AC5X: Fix address for UART1
ARM: footbridge: drop unnecessary inclusion
Revert "ARM: dts: armada-39x: Fix compatible string for gpios"
Revert "ARM: dts: armada-38x: Fix compatible string for gpios"
ARM: pxa: enable PXA310/PXA320 for DT-only build
riscv: dts: sifive: fu740: fix size of pcie 32bit memory
soc: qcom: apr: Make qcom,protection-domain optional again
...
Manivannan Sadhasivam [Wed, 18 Jan 2023 15:08:50 +0000 (20:38 +0530)]
EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info
The memory for llcc_driv_data is allocated by the LLCC driver. But when
it is passed as the private driver info to the EDAC core, it will get freed
during the qcom_edac driver release. So when the qcom_edac driver gets probed
again, it will try to use the freed data leading to the use-after-free bug.
Hence, do not pass llcc_driv_data as pvt_info but rather reference it
using the platform_data pointer in the qcom_edac driver.
Fixes:
27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs")
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Cc: <stable@vger.kernel.org> # 4.20
Link: https://lore.kernel.org/r/20230118150904.26913-4-manivannan.sadhasivam@linaro.org
Linus Torvalds [Fri, 20 Jan 2023 18:43:07 +0000 (10:43 -0800)]
Merge tag 'drm-fixes-2023-01-20' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Just a pretty regular week for this stage of things, amdgpu and i915,
along with some msm and misc others.
fb-helper:
- switcheroo fix
msm:
- kexec shutdown fix
- fix potential double free
i915:
- Reject display plane with height == 0
- re-disable RC6p on Sandy Bridge
- Fix hugepages' selftest
- DG2 hw workarounds
- switcheroo fix
vc4:
- fix a memory leak
panfrost:
- Kconfig fix
amdgpu:
- Fix display scaling
- Fix RN/CZN power reporting on some firmware versions
- Colorspace fixes
- Fix resource freeing in error case in CS IOCTL
- Fix warning on driver unload
- GC11 fixes
- DCN 3.1.4/5 S/G display workarounds"
* tag 'drm-fixes-2023-01-20' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amd/display: disable S/G display on DCN 3.1.4
drm/amd/display: disable S/G display on DCN 3.1.5
drm/amdgpu: allow multipipe policy on ASICs with one MEC
drm/amdgpu: correct MEC number for gfx11 APUs
drm/amd/display: fix issues with driver unload
drm/amdgpu: fix amdgpu_job_free_resources v2
drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix
drm/amd/display: Calculate output_color_space after pixel encoding adjustment
drm/amdgpu: fix cleaning up reserved VMID on release
drm/amdgpu: Correct the power calcultion for Renior/Cezanne.
drm/amd/display: Fix set scaling doesn's work
drm/i915: Remove unused variable
drm/i915/dg2: Introduce Wa_18019271663
drm/i915/dg2: Introduce Wa_18018764978
drm/fb-helper: Set framebuffer for vga-switcheroo clients
drm/i915: Allow switching away via vga-switcheroo if uninitialized
drm/i915/selftests: Unwind hugepages to drop wakeref on error
drm/i915: re-disable RC6p on Sandy Bridge
drm/panfrost: fix GENERIC_ATOMIC64 dependency
drm/i915/display: Check source height is > 0
...
Linus Torvalds [Fri, 20 Jan 2023 18:23:14 +0000 (10:23 -0800)]
Merge tag 'dmaengine-fix-6.2' of git://git./linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- email address Update for Jie Hai
- fix double increment of client_count in dma_chan_get()
- idxd driver fixes: use after free, probe error handling and callback
on wq disable
- fix for qcom gpi driver GO tre
- ptdma locking fix
- tegra & imx-sdma mem leak fix
* tag 'dmaengine-fix-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
ptdma: pt_core_execute_cmd() should use spinlock
dmaengine: tegra: Fix memory leak in terminate_all()
dmaengine: xilinx_dma: call of_node_put() when breaking out of for_each_child_of_node()
dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init
dmaengine: Fix double increment of client_count in dma_chan_get()
dmaengine: tegra210-adma: fix global intr clear
Add exception protection processing for vd in axi_chan_handle_err function
dmaengine: lgm: Move DT parsing after initialization
MAINTAINERS: update Jie Hai's email address
dmaengine: ti: k3-udma: Do conditional decrement of UDMA_CHAN_RT_PEER_BCNT_REG
dmaengine: idxd: Do not call DMX TX callbacks during workqueue disable
dmaengine: idxd: Prevent use after free on completion memory
dmaengine: idxd: Let probe fail when workqueue cannot be enabled
dmaengine: qcom: gpi: Set link_rx bit on GO TRE for rx operation
Linus Torvalds [Fri, 20 Jan 2023 18:10:52 +0000 (10:10 -0800)]
Merge tag 'phy-fixes-6.2' of git://git./linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- binding fix for g12a phys
- Kconfig operator precedence for TI driver
- renesas: register setting
- sunplus: null deref fix
- rockchip-inno fix for clk_disable_unprepare()
- MDM9607 init sequence revert due to regression
* tag 'phy-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: phy-can-transceiver: Skip warning if no "max-bitrate"
dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation
dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation
phy: freescale: imx8m-pcie: Add one missing error return
phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"
phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in rockchip_usb2phy_power_on()
phy: renesas: r8a779f0-eth-serdes: Fix register setting
phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe()
phy: ti: fix Kconfig warning and operator precedence
Linus Torvalds [Fri, 20 Jan 2023 17:58:44 +0000 (09:58 -0800)]
Merge tag 'net-6.2-rc5-2' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bluetooth, bpf and netfilter.
Current release - regressions:
- Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
addrconf", fix nsna_ping mode of team
- wifi: mt76: fix bugs in Rx queue handling and DMA mapping
- eth: mlx5:
- add missing mutex_unlock in error reporter
- protect global IPsec ASO with a lock
Current release - new code bugs:
- rxrpc: fix wrong error return in rxrpc_connect_call()
Previous releases - regressions:
- bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2
- wifi:
- mac80211: fix crashes on Rx due to incorrect initialization of
rx->link and rx->link_sta
- mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
aggregation handling, crashes
- brcmfmac: fix regression for Broadcom PCIe wifi devices
- rndis_wlan: prevent buffer overflow in rndis_query_oid
- netfilter: conntrack: handle tcp challenge acks during connection
reuse
- sched: avoid grafting on htb_destroy_class_offload when destroying
- virtio-net: correctly enable callback during start_xmit, fix stalls
- tcp: avoid the lookup process failing to get sk in ehash table
- ipa: disable ipa interrupt during suspend
- eth: stmmac: enable all safety features by default
Previous releases - always broken:
- bpf:
- fix pointer-leak due to insufficient speculative store bypass
mitigation (Spectre v4)
- skip task with pid=1 in send_signal_common() to avoid a splat
- fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events
- fix potential deadlock in htab_lock_bucket from same bucket
index but different map_locked index
- bluetooth:
- fix a buffer overflow in mgmt_mesh_add()
- hci_qca: fix driver shutdown on closed serdev
- ISO: fix possible circular locking dependency
- CIS: hci_event: fix invalid wait context
- wifi: brcmfmac: fixes for survey dump handling
- mptcp: explicitly specify sock family at subflow creation time
- netfilter: nft_payload: incorrect arithmetics when fetching VLAN
header bits
- tcp: fix rate_app_limited to default to 1
- l2tp: close all race conditions in l2tp_tunnel_register()
- eth: mlx5: fixes for QoS config and eswitch configuration
- eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
- eth: stmmac: fix invalid call to mdiobus_get_phy()
Misc:
- ethtool: add netlink attr in rss get reply only if the value is not
empty"
* tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
Revert "Merge branch 'octeontx2-af-CPT'"
tcp: fix rate_app_limited to default to 1
bnxt: Do not read past the end of test names
net: stmmac: enable all safety features by default
octeontx2-af: add mbox to return CPT_AF_FLT_INT info
octeontx2-af: update cpt lf alloc mailbox
octeontx2-af: restore rxc conf after teardown sequence
octeontx2-af: optimize cpt pf identification
octeontx2-af: modify FLR sequence for CPT
octeontx2-af: add mbox for CPT LF reset
octeontx2-af: recover CPT engine when it gets fault
net: dsa: microchip: ksz9477: port map correction in ALU table entry register
selftests/net: toeplitz: fix race on tpacket_v3 block close
net/ulp: use consistent error code when blocking ULP
octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
tcp: avoid the lookup process failing to get sk in ehash table
Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"
MAINTAINERS: add networking entries for Willem
net: sched: gred: prevent races when adding offloads to stats
l2tp: prevent lockdep issue in l2tp_tunnel_register()
...
Rafael J. Wysocki [Fri, 20 Jan 2023 17:42:16 +0000 (18:42 +0100)]
Merge branches 'acpi-prm' and 'acpi-video'
Merge an ACPI PRM (platform runtime) support fix and an ACPI backlight
quirk for 6.2-rc5:
- Check whether EFI runtime is available when registering the ACPI PRM
address space handler and when running it (Ard Biesheuvel).
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede).
* acpi-prm:
ACPI: PRM: Check whether EFI runtime is available
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
Pavel Begunkov [Fri, 20 Jan 2023 16:38:06 +0000 (16:38 +0000)]
io_uring/msg_ring: fix remote queue to disabled ring
IORING_SETUP_R_DISABLED rings don't have the submitter task set, so
it's not always safe to use ->submitter_task. Disallow posting msg_ring
messaged to disabled rings. Also add task NULL check for loosy sync
around testing for IORING_SETUP_R_DISABLED.
Cc: stable@vger.kernel.org
Fixes:
6d043ee1164ca ("io_uring: do msg_ring in target task via tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 20 Jan 2023 16:38:05 +0000 (16:38 +0000)]
io_uring/msg_ring: fix flagging remote execution
There is a couple of problems with queueing a tw in io_msg_ring_data()
for remote execution. First, once we queue it the target ring can
go away and so setting IORING_SQ_TASKRUN there is not safe. Secondly,
the userspace might not expect IORING_SQ_TASKRUN.
Extract a helper and uniformly use TWA_SIGNAL without TWA_SIGNAL_NO_IPI
tricks for now, just as it was done in the original patch.
Cc: stable@vger.kernel.org
Fixes:
6d043ee1164ca ("io_uring: do msg_ring in target task via tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jakub Kicinski [Fri, 20 Jan 2023 16:38:16 +0000 (08:38 -0800)]
Revert "Merge branch 'octeontx2-af-CPT'"
This reverts commit
b4fbf0b27fa9dd2594b3371532341bd4636a00f9, reversing
changes made to
6c977c5c2e4c5d8ad1b604724cc344e38f96fe9b.
This seems like net-next material.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jens Axboe [Fri, 20 Jan 2023 15:08:29 +0000 (08:08 -0700)]
Merge tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme into block-6.2
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)"
* tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
Greg Kroah-Hartman [Fri, 20 Jan 2023 13:53:30 +0000 (14:53 +0100)]
USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
The USB_DEVICE_ID_CODEMERCS_IOW100 header size was incorrect, it should
be 12, not 13.
Cc: stable <stable@kernel.org>
Fixes:
17a82716587e ("USB: iowarrior: fix up report size handling for some devices")
Reported-by: Christoph Jung <jung@codemercs.com>
Link: https://lore.kernel.org/r/20230120135330.3842518-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Stein [Fri, 20 Jan 2023 12:27:14 +0000 (13:27 +0100)]
usb: host: ehci-fsl: Fix module alias
Commit
ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent
driver module") changed DRV_NAME which was used for MODULE_ALIAS as well.
Starting from this the module alias didn't match the platform device
name created in fsl-mph-dr-of.c
Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of.
This is needed for module autoloading on ls1021a.
Fixes:
ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Morley [Thu, 19 Jan 2023 19:00:28 +0000 (19:00 +0000)]
tcp: fix rate_app_limited to default to 1
The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.
Fixes:
eb8329e0a04d ("tcp: export data delivery rate")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Wed, 18 Jan 2023 20:35:01 +0000 (12:35 -0800)]
bnxt: Do not read past the end of test names
Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:
detected buffer overflow in strnlen
[...]
Call Trace:
bnxt_ethtool_init.cold+0x18/0x18
Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls.
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/
Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Fixes:
eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.")
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthew Howell [Thu, 19 Jan 2023 19:40:29 +0000 (14:40 -0500)]
serial: exar: Add support for Sealevel 7xxxC serial cards
Add support for Sealevel 7xxxC serial cards.
This patch:
* Adds IDs to recognize 7xxxC cards from Sealevel Systems.
* Updates exar_pci_probe() to set nr_ports to last two bytes of primary
dev ID for these cards.
Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vishnu Dasa [Wed, 30 Nov 2022 07:05:11 +0000 (23:05 -0800)]
VMCI: Use threaded irqs instead of tasklets
The vmci_dispatch_dgs() tasklet function calls vmci_read_data()
which uses wait_event() resulting in invalid sleep in an atomic
context (and therefore potentially in a deadlock).
Use threaded irqs to fix this issue and completely remove usage
of tasklets.
[ 20.264639] BUG: sleeping function called from invalid context at drivers/misc/vmw_vmci/vmci_guest.c:145
[ 20.264643] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 762, name: vmtoolsd
[ 20.264645] preempt_count: 101, expected: 0
[ 20.264646] RCU nest depth: 0, expected: 0
[ 20.264647] 1 lock held by vmtoolsd/762:
[ 20.264648] #0:
ffff0000874ae440 (sk_lock-AF_VSOCK){+.+.}-{0:0}, at: vsock_connect+0x60/0x330 [vsock]
[ 20.264658] Preemption disabled at:
[ 20.264659] [<
ffff80000151d7d8>] vmci_send_datagram+0x44/0xa0 [vmw_vmci]
[ 20.264665] CPU: 0 PID: 762 Comm: vmtoolsd Not tainted 5.19.0-0.rc8.20220727git39c3c396f813.60.fc37.aarch64 #1
[ 20.264667] Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020
[ 20.264668] Call trace:
[ 20.264669] dump_backtrace+0xc4/0x130
[ 20.264672] show_stack+0x24/0x80
[ 20.264673] dump_stack_lvl+0x88/0xb4
[ 20.264676] dump_stack+0x18/0x34
[ 20.264677] __might_resched+0x1a0/0x280
[ 20.264679] __might_sleep+0x58/0x90
[ 20.264681] vmci_read_data+0x74/0x120 [vmw_vmci]
[ 20.264683] vmci_dispatch_dgs+0x64/0x204 [vmw_vmci]
[ 20.264686] tasklet_action_common.constprop.0+0x13c/0x150
[ 20.264688] tasklet_action+0x40/0x50
[ 20.264689] __do_softirq+0x23c/0x6b4
[ 20.264690] __irq_exit_rcu+0x104/0x214
[ 20.264691] irq_exit_rcu+0x1c/0x50
[ 20.264693] el1_interrupt+0x38/0x6c
[ 20.264695] el1h_64_irq_handler+0x18/0x24
[ 20.264696] el1h_64_irq+0x68/0x6c
[ 20.264697] preempt_count_sub+0xa4/0xe0
[ 20.264698] _raw_spin_unlock_irqrestore+0x64/0xb0
[ 20.264701] vmci_send_datagram+0x7c/0xa0 [vmw_vmci]
[ 20.264703] vmci_datagram_dispatch+0x84/0x100 [vmw_vmci]
[ 20.264706] vmci_datagram_send+0x2c/0x40 [vmw_vmci]
[ 20.264709] vmci_transport_send_control_pkt+0xb8/0x120 [vmw_vsock_vmci_transport]
[ 20.264711] vmci_transport_connect+0x40/0x7c [vmw_vsock_vmci_transport]
[ 20.264713] vsock_connect+0x278/0x330 [vsock]
[ 20.264715] __sys_connect_file+0x8c/0xc0
[ 20.264718] __sys_connect+0x84/0xb4
[ 20.264720] __arm64_sys_connect+0x2c/0x3c
[ 20.264721] invoke_syscall+0x78/0x100
[ 20.264723] el0_svc_common.constprop.0+0x68/0x124
[ 20.264724] do_el0_svc+0x38/0x4c
[ 20.264725] el0_svc+0x60/0x180
[ 20.264726] el0t_64_sync_handler+0x11c/0x150
[ 20.264728] el0t_64_sync+0x190/0x194
Signed-off-by: Vishnu Dasa <vdasa@vmware.com>
Suggested-by: Zack Rusin <zackr@vmware.com>
Reported-by: Nadav Amit <namit@vmware.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Fixes:
463713eb6164 ("VMCI: dma dg: add support for DMA datagrams receive")
Cc: <stable@vger.kernel.org> # v5.18+
Cc: VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://lore.kernel.org/r/20221130070511.46558-1-vdasa@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elliot Berman [Thu, 12 Jan 2023 18:23:12 +0000 (10:23 -0800)]
misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
The srcvm parameter of qcom_scm_assign_mem is a pointer to a bitfield of
VMIDs. The bitfield is updated with which VMIDs have permissions
after the qcom_scm_assign_mem call. This makes it simpler for clients to
make qcom_scm_assign_mem calls later, they always pass in same srcvm
bitfield and do not need to closely track whether memory was originally
shared.
When restoring permissions to HLOS, fastrpc is incorrectly using the
first VMID directly -- neither the BIT nor the other possible VMIDs the
memory was already assigned to. We already have a field intended for
this purpose: "perms" in the struct fastrpc_channel_ctx, but it was
never used. Start using the perms field.
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes:
e90d91190619 ("misc: fastrpc: Add support to secure memory map")
Fixes:
0871561055e6 ("misc: fastrpc: Add support for audiopd")
Fixes:
532ad70c6d44 ("misc: fastrpc: Add mmap request assigning for static PD pool")
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
drivers/misc/fastrpc.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
Link: https://lore.kernel.org/r/20230112182313.521467-1-quic_eberman@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Khazhismel Kumykov [Wed, 18 Jan 2023 01:02:12 +0000 (17:02 -0800)]
gsmi: fix null-deref in gsmi_get_variable
We can get EFI variables without fetching the attribute, so we must
allow for that in gsmi.
commit
859748255b43 ("efi: pstore: Omit efivars caching EFI varstore
access layer") added a new get_variable call with attr=NULL, which
triggers panic in gsmi.
Fixes:
74c5b31c6618 ("driver: Google EFI SMI")
Cc: stable <stable@kernel.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Link: https://lore.kernel.org/r/20230118010212.1268474-1-khazhy@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ola Jeppsson [Thu, 24 Nov 2022 17:49:41 +0000 (17:49 +0000)]
misc: fastrpc: Fix use-after-free race condition for maps
It is possible that in between calling fastrpc_map_get() until
map->fl->lock is taken in fastrpc_free_map(), another thread can call
fastrpc_map_lookup() and get a reference to a map that is about to be
deleted.
Rewrite fastrpc_map_get() to only increase the reference count of a map
if it's non-zero. Propagate this to callers so they can know if a map is
about to be deleted.
Fixes this warning:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 10100 at lib/refcount.c:25 refcount_warn_saturate
...
Call trace:
refcount_warn_saturate
[fastrpc_map_get inlined]
[fastrpc_map_lookup inlined]
fastrpc_map_create
fastrpc_internal_invoke
fastrpc_device_ioctl
__arm64_sys_ioctl
invoke_syscall
Fixes:
c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Abel Vesa [Thu, 24 Nov 2022 17:49:40 +0000 (17:49 +0000)]
misc: fastrpc: Don't remove map on creater_process and device_release
Do not remove the map from the list on error path in
fastrpc_init_create_process, instead call fastrpc_map_put, to avoid
use-after-free. Do not remove it on fastrpc_device_release either,
call fastrpc_map_put instead.
The fastrpc_free_map is the only proper place to remove the map.
This is called only after the reference count is 0.
Fixes:
b49f6d83e290 ("misc: fastrpc: Fix a possible double free")
Cc: stable <stable@kernel.org>
Co-developed-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Abel Vesa [Thu, 24 Nov 2022 17:49:39 +0000 (17:49 +0000)]
misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
Currently, there is a race window between the point when the mutex is
unlocked in fastrpc_map_lookup and the reference count increasing
(fastrpc_map_get) in fastrpc_map_find, which can also lead to
use-after-free.
So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us
to both protect the maps list by also taking the &fl->lock spinlock and
the reference count, since the spinlock will be released only after.
Add take_ref argument to make this suitable for all callers.
Fixes:
8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation")
Cc: stable <stable@kernel.org>
Co-developed-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 29 Nov 2022 09:45:16 +0000 (12:45 +0300)]
misc: fastrpc: fix error code in fastrpc_req_mmap()
The "err" variable shadows an earlier global variable so this code
returns success instead of a negative error code.
Fixes:
532ad70c6d44 ("misc: fastrpc: Add mmap request assigning for static PD pool")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y4XUrMETCl1O6t0A@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Mon, 12 Dec 2022 22:02:47 +0000 (00:02 +0200)]
mei: me: add meteor lake point M DID
Add Meteor Lake Point M device id.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221212220247.286019-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Mon, 12 Dec 2022 22:02:46 +0000 (00:02 +0200)]
mei: bus: fix unlink on bus in error path
Unconditional call to mei_cl_unlink in mei_cl_bus_dev_release leads
to call of the mei_cl_unlink without corresponding mei_cl_link.
This leads to miscalculation of open_handle_count (decrease without
increase).
Call unlink in mei_cldev_enable fail path and remove blanket unlink
from mei_cl_bus_dev_release.
Fixes:
34f1166afd67 ("mei: bus: need to unlink client before freeing")
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221212220247.286019-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 20 Jan 2023 10:40:04 +0000 (11:40 +0100)]
Merge tag 'icc-6.2-rc5' of git://git./linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v6.2-rc
This contains fixes for a rare boot hang issue that has been reported
on the db820c dragonboard.
- dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
- interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
- interconnect: qcom: msm8996: Fix regmap max_register values
- interconnect: qcom: rpm: Use _optional func for provider clocks
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: rpm: Use _optional func for provider clocks
interconnect: qcom: msm8996: Fix regmap max_register values
interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
projects / platform / kernel / linux-starfive.git / log