Olof Johansson [Tue, 11 Dec 2018 15:43:46 +0000 (07:43 -0800)]
Merge tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux into next/dt
This device-tree pxa update brings :
- various fixes from Daniel (W=12 issues mainly)
- support for the first pxa3xx devicetree pxa board
* tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux:
ARM: dts: pxa3xx: Add Raumfeld DTS files
ARM: dts: pxa: clean up USB controller nodes
ARM: dts: pxa3xx: clean up pxa3xx clock controller node name
ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus
ARM: dts: pxa2xx: fix hwuart memory range
ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node
ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus
ARM: dts: pxa3xx: add gcu node
Signed-off-by: Olof Johansson <olof@lixom.net>
Daniel Mack [Fri, 30 Nov 2018 17:55:43 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: Add Raumfeld DTS files
This patch adds a set of DTS files that support all PXA3xx based Raumfeld
audio hardware devices.
Common nodes are factored out into 'common' and 'tuneable-clock' include
files to keep the top-level DTS files smaller.
Signed-off-by: Daniel Mack <daniel@zonque.org>
[Robert: Reordered Makefile in alphabetical order]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Olof Johansson [Mon, 3 Dec 2018 21:04:49 +0000 (13:04 -0800)]
Merge tag 'qcom-dts-for-4.21' of git://git./linux/kernel/git/agross/linux into next/dt
Qualcomm Device Tree Changes for v4.21
* Add entry for Qualcomm TSENS thermal drivers
* Update msm8974 thermal entries
* Fix msm8974 Hammerhead magnetometer gpios
* Add SoC specific compatibles for SDHC nodes
* Remove Arrow SD600 eval board
* tag 'qcom-dts-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom: Remove Arrow SD600 eval board
ARM: dts: qcom: Add SoC-specific string for sdhci-msm-v4 nodes
ARM: dts: qcom: msm8974-hammerhead: correct gpios property on magnetometer
ARM: dts: msm8974: thermal: Add "qcom,sensors" property
ARM: dts: msm8974: thermal: split address space into two
MAINTAINERS: Add entry for Qualcomm TSENS thermal drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 3 Dec 2018 21:04:14 +0000 (13:04 -0800)]
Merge tag 'qcom-arm64-for-4.21' of git://git./linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.21
* Add QCS404 base platform and nodes
* Add QCS404 EVB boards
* Add external SD and dependencies for MSM8998-mtp
* Add default scm compatible for MSM8998
* Fix XO clk name on MSM8998
* Add prng-ee nodes for SDM845 and MSM8996
* Add ADC die temp node for pm8998
* Fix documentation on QCOM ADC sample
* tag 'qcom-arm64-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (34 commits)
arm64: dts: qcom: msm8998: Fix compatible of scm node
arm64: dts: qcom: msm8998: Add SDC2 control pins
arm64: dts: qcom: msm8998-mtp: Add external SD
arm64: dts: qcom: msm8998: Add SDCC2
arm64: dts: qcom: msm8998: correct xo clock name
arm64: dts: qcom: pms405: Add pon and pwrkey nodes
arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2
arm64: dts: qcom: qcs404: Add BAM DMA node
arm64: dts: qcom: qcs404: add prng-ee node
arm64: dts: qcom: qcs404: Add remoteproc nodes
arm64: dts: qcom: qcs404: Add scm firmware node
arm64: dts: qcom: pms405: add gpios
arm64: dts: qcom: pms405: add rtc node
arm64: dts: qcom: qcs404: add spmi node
arm64: dts: qcom: pms405: add spmi node
arm64: dts: qcom: qcs404: Add sdcc1 node
arm64: dts: qcom: qcs404: Add TLMM pinctrl node
arm64: dts: qcom: qcs404: add smp2p nodes
arm64: dts: qcom: qcs404: Add PMS405 RPM regulators
arm64: dts: qcom: qcs404: Add RPM GLINK related nodes
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Sun, 2 Dec 2018 11:38:48 +0000 (12:38 +0100)]
ARM: mmp2: DT: be compatible with mrvl,mmp2
There are more boards that can work with mmp2-dt than just Brownstone.
The OLPC XO-1.75 device tree root is compatible with "mrvl,mmp2" only.
The "mrvl,mmp2-brownstone" string is safe to remove: the Brownstone
device tree contains the "mrvl,mmp2" compatible string too.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 3 Dec 2018 20:50:41 +0000 (12:50 -0800)]
Merge tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.21, please pull the following:
- Rafal relicenses a bunch of DTS files he wrote under the GPL 2.0+/MIT
license and adds proper SPDX license tags in the process
- Rene adds support for the Linksys EA6500 v2 Wi-Fi router based on
BCM4708 plus two BCM4360 and BCM4331 radios
- Phil documents and updates the vchiq mailbox compatible string in
order to establish a correct agreement between the Raspberry Pi
firmware and the ARM CPU's view of what an ARM CPU cache line size is,
he also fixes the mailbox "reg" property to be correctly expressed in
bytes
- Stefan updates the Raspberry Pi Zero DTS files to use SPDX tags
- Florian enables the SATA PHY and AHCI controller on the BCM63138 SoCs,
he also does a bit of refactoring of aliases for the Northstar Plus
DTS files
* tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Describe Northstar pins mux controller
ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
ARM: dts: bcm283x: Correct mailbox register sizes
ARM: dts: bcm283x: Correct vchiq compatible string
dt-bindings: soc: Document "brcm,bcm2836-vchiq"
ARM: dts: NSP: Move aliases to bcm-nsp.dtsi
ARM: dts: BCM53573: Relicense SoC file to the GPL 2.0+ / MIT
ARM: dts: BCM63xx: Enable SATA AHCI and PHY for BCM963138DVT
ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
ARM: dts: BCM53573: Relicense Tenda AC9 file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47081/BCM4709 files to the GPL 2.0+ / MIT
Signed-off-by: Olof Johansson <olof@lixom.net>
Daniel Mack [Sat, 1 Dec 2018 13:54:51 +0000 (14:54 +0100)]
ARM: dts: pxa: clean up USB controller nodes
PXA25xx SoCs don't have a USB controller, so drop the node from the
common pxa2xx.dtsi base file. Both pxa27x and pxa3xx have a dedicated
node already anyway.
While at it, unify the names for the nodes across all pxa platforms.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Sergey Yanovich <ynvich@gmail.com>
Link: https://patchwork.kernel.org/patch/8375421/
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Fri, 30 Nov 2018 17:55:42 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: clean up pxa3xx clock controller node name
The clock controller node does not need a unit slave designator as it does
not have a reg property. Also, remove the underscore from the name.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Fri, 30 Nov 2018 17:55:41 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus
These are devices on the PXA bus, so make the device tree structure
reflect that.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Fri, 30 Nov 2018 17:55:39 +0000 (18:55 +0100)]
ARM: dts: pxa2xx: fix hwuart memory range
The memory range for the hwuart is at 0x41600000, not 0x41100000.
This also solves a conflict with the MMC controller node.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Fri, 30 Nov 2018 17:55:38 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node
The pinctrl node does not have any children, so the #address-cells and #size-cells
properties are not needed.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Fri, 30 Nov 2018 17:55:37 +0000 (18:55 +0100)]
ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus
PXA is single-core only, so this node will not have enumerable children.
Drop the #address-cells and #size-cells properties to squelch a dtc warning.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Mon, 5 Nov 2018 19:18:27 +0000 (20:18 +0100)]
ARM: dts: pxa3xx: add gcu node
Add a device node for hardware graphic acceleration.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Olof Johansson [Fri, 30 Nov 2018 23:46:17 +0000 (15:46 -0800)]
Merge tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoCs DT updates for 4.21
* Hi3660 SoC and related boards:
- Standardize LED labels and triggers for the hikey960 board
- Add the missing cooling-cells property for the cpu nodes
- Add all cpus into the cooling maps
* Hi3670 SoC and related boards:
- Add clock nodes and update the uart clock
- Add Pinctrl, GPIO and uart nodes
- Enable uart and add GPIO line names for the hikey970 board
* Hi3798 SoC and related boards:
- Standardize LED labels and triggers for the poplar board
* Hi6220 SoC and related boards:
- Standardize LED labels and triggers for the hikey board
- Add all cpus into the cooling maps
* tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi:
ARM64: dts: hisilicon: Add all CPUs in cooling maps
arm64: dts: hi3660: Add missing cooling device properties for CPUs
arm64: dts: hisilicon: poplar: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey970: Add GPIO line names
arm64: dts: hisilicon: hikey970: Enable on-board UARTs
arm64: dts: hisilicon: hi3670: Add UART nodes
arm64: dts: hisilicon: hi3670: Add GPIO controller support
arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board
arm64: dts: hisilicon: Source SoC clock for UART6
arm64: dts: hisilicon: Add clock nodes for Hi3670 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
Rob Herring [Fri, 30 Nov 2018 01:52:51 +0000 (19:52 -0600)]
ARM: dts: aspeed: add missing memory unit-address
The base aspeed-g5.dtsi already defines a '/memory@
80000000' node, so
'/memory' in the board files create a duplicate node. We're probably
getting lucky that the bootloader fixes up the memory node that the
kernel ends up using. Add the unit-address so it's merged with the base
node.
Found with DT json-schema checks.
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Rob Herring [Fri, 30 Nov 2018 01:05:47 +0000 (19:05 -0600)]
ARM: dts: realview-pbx: Fix duplicate regulator nodes
There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:18:30 +0000 (15:18 -0800)]
Merge tag 'amlogic-dt64' of https://git./linux/kernel/git/khilman/linux-amlogic into next/dt
arm64: Amlogic DT updates for v4.21
Some highlights:
- new boards: Phicomm N1 (S905D), Libretech S805-AC
- fixes for pinmux pad bias, GPIO line names
- AXG: enable SCPI, add secure monitor
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (26 commits)
arm64: dts: meson-gx: Add Internal Clock Measurer node
arm64: dts: amlogic: Add all CPUs in cooling maps
arm64: dts: meson: add libretech aml-s805x-ac board
dt-bindings: arm: amlogic: add libretech aml-s805x-ac bindings
dt-bindings: arm: amlogic: Add Phicomm N1
dt-bindings: Add vendor prefix for PHICOMM Co., Ltd.
arm64: dts: meson-gxl: add support for phicomm n1
arm64: dts: meson: consistently disable pin bias
arm64: dts: meson: disable pad bias for mmc pinmuxes
arm64: dts: meson: remove extra subnode in mmc clk_gate pinmux
arm64: dts: meson: s400: add bcm bluetooth device
arm64: dts: meson: p230: disable advertisement EEE for GbE.
arm64: dts: meson-axg: enable SCPI
Documentation: bindings: Add missing Amlogic SCPI sensor bindings
arm64: dts: meson-axg: correct sram shared mem unit-address
arm64: dts: meson-axg: fix mailbox address
arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
arm64: dts: meson-axg: add secure monitor
arm64: dts: meson-axg: s400: add cts-rts to the bluetooth uart
arm64: dts: meson-gxl-khadas-vim: fix GPIO lines names
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:18:03 +0000 (15:18 -0800)]
Merge tag 'amlogic-dt' of https://git./linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic 32-bit DT updates for v4.21
- support more timers on meson8
- add the stdout-path property on several boards
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson: add the clock inputs for the Meson timer
ARM: dts: meson: add the TIMER B/C/D interrupts
ARM: dts: meson: consistently disable pin bias
ARM: dts: meson8b: mxq: add the /chosen/stdout-path property
ARM: dts: meson8: minix-neo-x8: add the /chosen/stdout-path property
ARM: dts: meson6: atv1200: add the /chosen/stdout-path property
dt-bindings: timer: meson6_timer: document the clock inputs
dt-bindings: timer: meson6_timer: document all interrupts
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:17:33 +0000 (15:17 -0800)]
Merge tag 'omap-for-v4.21/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Device tree changes for omaps for v4.21 merge window
These changes mostly configure pinctrl for am437x-gp-evm. There is
also non-critical fix for a comment for Clang, and we enable earlycon
for am3517-evm.
* tag 'omap-for-v4.21/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am437x-gp-evm: Add sleep state for beeper pins
ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake
ARM: dts: am437x-gp-evm: Add uart0 pinctrl default and sleep states
ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins
ARM: dts: am437x-gp-evm: Add pinctrl for unused_pins
ARM: dts: am437x-gp-evm: Add state for ddr3 vtt toggle pin
ARM: dts: am3517-evm: Enable earlycon stdout path
ARM: dts: omap3-gta04: Fix comment block
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:16:42 +0000 (15:16 -0800)]
Merge tag 'vexpress-drm-arm-soc' of git://git./linux/kernel/git/linusw/linux-integrator into next/dt
Versatile Express DTS update for DRM:
This updates the Versatile Express family DTS files to
contain the correct and detailed information required
for the PL11x DRM driver to work properly.
* tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Modernize the Vexpress PL111 integration
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:14 +0000 (18:53 +0100)]
ARM: dts: mmp2: Add SSP controllers
Despite Marvel keeps their base addresses secret there's a good chance
they're actually correct.
SSP1 and SSP3 bases were taken from OLPC 1.75: OpenFirmware and kernel
respectively. SSP2 and SSP4 addresses are from James Cameron who actually
has a copy of the data sheet.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:13 +0000 (18:53 +0100)]
ARM: dts: mmp2: add USB OTG host controller
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:12 +0000 (18:53 +0100)]
ARM: dts: mmp2: add OTG PHY
The USB OTG PHY chip. To be used by the OTG controller.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:11 +0000 (18:53 +0100)]
ARM: dts: mmp2: add more TWSI controllers
I've gotten the base addresses, clocks and interrupts from an rusty and old
out-of-tree driver. I haven't actually checked against the datasheet, since
that one is reserved for the Marvell inner circle.
Tested with an accelerometer on TWSI6 on an OLPC XO 1.75 machine.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:10 +0000 (18:53 +0100)]
ARM: dts: mmp2: fix TWSI2
Marvell keeps their MMP2 datasheet secret, but there are good clues
that TWSI2 is not on 0xd4025000 on that platform, not does it use
IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor:
arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP 58
I'm taking a somewhat educated guess that is probably a copy & paste
error from PXA168 or PXA910 and that the real controller in fact hides
at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17.
I'm also copying some properties from TWSI1 that were missing or
incorrect.
Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:09 +0000 (18:53 +0100)]
ARM: dts: mmp2: add MMC controllers
There's apparently four of them on a MMP2.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:08 +0000 (18:53 +0100)]
ARM: dts: mmp2: add clock to the timer
The timer needs the timer clock to be enabled, otherwise it stops
ticking.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:07 +0000 (18:53 +0100)]
ARM: dts: mmp2: give gpio node a name
This will be useful for boards that actually use GPIO pins.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:06 +0000 (18:53 +0100)]
ARM: dts: mmp2: fix the gpio interrupt cell number
gpio-pxa uses two cell to encode the interrupt source: the pin number
and the trigger type. Adjust the device node accordingly.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:05 +0000 (18:53 +0100)]
dt-bindings: mrvl,mmp-timer: add clock
The timer needs the timer clock to be enabled, otherwise it stops
ticking.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:09:13 +0000 (15:09 -0800)]
Merge tag 'socfpga_dts_updates_for_v5.0' of git://git./linux/kernel/git/dinguyen/linux into next/dt
SoCFPGA DTS updates for v5.0
- Use SPDX license identifier for all SoCFPGA DTS files.
- Remove dma-mask property as it has been deprecated.
- Use tabs in DTS files.
- Use the specific "altr,stratix10-rst-mgr" property for the Stratix10
reset manager.
* tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: use "altr,stratix10-rst-mgr" binding
ARM: dts: socfpga: use tabs for indentation
arm: dts: socfpga: remove dma-mask property
arm: dts: socfpga*.dts*: use SPDX-License-Identifier
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:05:34 +0000 (15:05 -0800)]
Merge tag 'renesas-arm64-dt-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt
Renesas ARM64 Based SoC DT Updates for v4.21
* H3 (r8a7795) SoC:
- Remove unneeded sound #address/size-cells
* M3-W (r8a7796) SoC:
- Describe CMT (Compare Match Timer) devices in DT
- Describe I2C-DVFS device node in DT
* M3-N (r8a77965) SoC:
- Describe CAN, CANFD and LVDS in DT
* R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs:
- Describe CPU topology, capacity and cooling maps in DT
- Add SSIU support to R-Car audio
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs:
- Extend register range of HSUSB device to match documentation
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based
Salvator-X, Salvator-XS and ULCB boards:
- Switch eMMC bus to 1V8
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based
Salvator-X and Salvator-XS boards:
- Describe USB3.0 xHCI host and prerepheral devices as companions
* R-Car E3 (r8a77990) SoC:
- Add thermal support
- Add support for interupt controller for external devices (INTC-EX)
- Describe all SCIF devices and SYS-DMA for I2C and MSIOF devices
* R-Car E3 (r8a77990) based Ebisu board:
- Enable SDHI, CAN, CANFD, audio and USB3.0
- Describe serial console pins
* R-Car E3 (r8a77990) based Ebisu and
R-Car D3 (r8a77995) based Draak board:
- Enable USB2.0 peripheral device
* R-Car M3-N (r8a77965), E3 (r8a77990) and V3H (r8a77980) SoCs:
- Connect EtherAVB to IPMMU
* R-Car V3M (r8a77970) and V3H (r8a77980) SoCs:
- Describe TMU (timer unit), PWM timer controller and MSIOF devides in DT
- Add thermal support
* RZ/G2M (r8a774a1) SoC:
- Use clock and power index macros
- Describe VIN, CSI-2 and CAN devices in DT
* tag 'renesas-arm64-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (40 commits)
arm64: dts: renesas: Add all CPUs in cooling maps
arm64: dts: renesas: r8a77990: add thermal device support
arm64: dts: renesas: r8a77990: Enable I2C DMA
arm64: dts: renesas: r8a7796: Add CMT device nodes
arm64: dts: renesas: r8a7796: add SSIU support for sound
arm64: dts: renesas: r8a77990: Add I2C-DVFS device node
arm64: dts: renesas: r8a77990: ebisu: Add and enable CAN,FD device nodes
arm64: dts: renesas: r8a77965: Add CAN and CANFD controller nodes
arm64: dts: renesas: r8a77990: ebisu: Add and enable PCIe device node
arm64: dts: renesas: Add CPU capacity-dmips-mhz
arm64: dts: renesas: Add CPU topology on R-Car Gen3 SoCs
arm64: dts: renesas: r8a774a1: Replace clock magic numbers
arm64: dts: renesas: r8a774a1: Replace power magic numbers
arm64: dts: renesas: r8a7795: add SSIU support for sound
arm64: dts: renesas: r8a77990: Fix VIN endpoint numbering
arm64: dts: renesas: ebisu: Add and enable SDHI device nodes
arm64: dts: renesas: ebisu: Add serial console pins
arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB
arm64: dts: renesas: r8a77990: Add all HSCIF nodes
arm64: dts: renesas: r8a779{7|8}0: add TMU support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:04:37 +0000 (15:04 -0800)]
Merge tag 'renesas-arm-dt-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Updates for v4.21
* RZ/N1D (r9a06g032) SoC:
- Correct GIC DT node name
- Enable pin controller
* RZ/G1C (r8a77470) iWave g23S single board computer
- Add QSPI flash support
- Add pinctl support for EtherAVB
- Enable CMT0 (Renesas R-Car Compare Match Timer)
- Enable RWDT (Renesas Watchdog Timer)
- Enable uSD and eMMC support
* RZ/G1C (r8a77470) SoC:
- Describe USB-DMAC and I2C devices in DT
* R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and
SH-Mobile AG5 (sh72a0) SoCs:
- Include SoC name in DTSI
* R-Car H2 (r8a7790) based lager, and
R-Car M2-W (r8a7791) based koelsch and porter boards:
- Disable unconnected LVDS encoders
* tag 'renesas-arm-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r9a06g032: Correct the GIC DT node name
ARM: dts: iwg23s-sbc: Add QSPI flash support
ARM: dts: r8a77470: Add QSPI support
ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVB
ARM: dts: iwg23s-sbc: Enable cmt0
ARM: dts: r8a77470: Add CMT SoC specific support
ARM: dts: r8a77470: Add USB-DMAC device nodes
ARM: dts: iwg23s-sbc: Enable watchdog support
ARM: dts: r8a77470: Add watchdog support to SoC dtsi
ARM: dts: r8a7740, emev2, sh73a0: Include SoC name in DTSI
ARM: dts: r8a779[01]: Disable unconnected LVDS encoders
ARM: dts: iwg23s-sbc: Add uSD and eMMC support
ARM: dts: r8a77470: Add SDHI1 support
ARM: dts: r8a77470: Add SDHI0 support
ARM: dts: r8a77470: Add I2C[0123] support
ARM: dts: r9a06g032: Add pinctrl node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:04:01 +0000 (15:04 -0800)]
Merge tag 'v4.21-rockchip-dts64-1' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
New dts for Gru-Scarlet (tablet device), default backlight brightness
for all Gru devices, rk3399 spi dma properties, some improvements for
the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the
emmc on the rock64 and declaring all cpu cores in the cooling maps
instead of just cpu0.
* tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add all CPUs in cooling maps
arm64: dts: rockchip: add Gru Scarlet devicetrees
arm64: dts: rockchip: move backlight from rk3399 sapphire to excavator
arm64: dts: rockchip: Use default brightness table for rk3399-gru
arm64: dts: rockchip: add chosen node on rk3399-sapphire
arm64: dts: rockchip: enable HS200 for eMMC on rock64
arm64: dts: rockchip: add fan on rk3399-sapphire board
arm64: dts: rockchip: add rk3399 SPI DMAs
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:03:39 +0000 (15:03 -0800)]
Merge tag 'v4.21-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Powerdomain and QoS nodes for rk3066 and rk3188. A fix for a rock2
regulator name and referencing all cpus in the cooling maps instead
of only cpu0.
* tag 'v4.21-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add all CPUs in cooling maps
ARM: dts: rockchip: Fix rk3288-rock2 vcc_flash name
ARM: dts: rockchip: add rk3066/rk3188 power-domains
ARM: dts: rockchip: add qos nodes found on rk3066 and rk3188
dt-bindings: add power-domain header for RK3066 SoCs
dt-bindings: add power-domain header for RK3188 SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 19:45:47 +0000 (11:45 -0800)]
Merge tag 'vexpress-updates-4.20' of git://git./linux/kernel/git/sudeep.holla/linux into next/dt
ARMv7 Vexpress updates for v4.20
Single patch to use updated coresight graph bindings thereby removing
loads of dtc warnings
* tag 'vexpress-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress/TC2: Update entries to match latest coresight bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
Rafał Miłecki [Fri, 9 Nov 2018 08:56:49 +0000 (09:56 +0100)]
ARM: dts: BCM5301X: Describe Northstar pins mux controller
This describes hardware & will allow referencing pin functions. The
first usage is UART1 which allows supporting devices using it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
René Kjellerup [Mon, 1 Oct 2018 22:07:16 +0000 (15:07 -0700)]
ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
It is wireless home router based on BCM4708A0 with BCM4360 + BCM4331
wireless chipsets. The BCM4331 5GHz chip currently isn't supported only
due to missing compatible firmware.
Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Bjorn Andersson [Fri, 30 Nov 2018 06:56:55 +0000 (22:56 -0800)]
arm64: dts: qcom: msm8998: Fix compatible of scm node
The scm binding and driver was updated to rely on the fallback to the
default qcom,scm for any modern SoC and as such both are required. Add
the default compatible to make the scm instance probe.
Fixes:
d850156a226a ("arm64: dts: qcom: msm8998: Add firmware node")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Jeffrey Hugo [Thu, 15 Nov 2018 17:18:10 +0000 (10:18 -0700)]
arm64: dts: qcom: msm8998: Add SDC2 control pins
The SDC2 control pins are typically used to manage sleep.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Jeffrey Hugo [Thu, 15 Nov 2018 17:18:11 +0000 (10:18 -0700)]
arm64: dts: qcom: msm8998-mtp: Add external SD
The externally accessible SD card slot on the MTP is driven by SDCC2.
Wire it up for use.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Jeffrey Hugo [Thu, 15 Nov 2018 17:18:09 +0000 (10:18 -0700)]
arm64: dts: qcom: msm8998: Add SDCC2
SDCC2 is typically used as the controller for an external SD card slot.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Jeffrey Hugo [Thu, 15 Nov 2018 17:18:08 +0000 (10:18 -0700)]
arm64: dts: qcom: msm8998: correct xo clock name
The root parent clock of most msm8998 clock is the "xo" clock. The DT node
is incorrectly named "xo_board", which prevents Linux from correctly
parsing the clock tree, resulting in most clocks being unparented and
unable to be manipulated. The end result is that we can't turn on clocks
for peripherals like SD, so init usually fails.
Fixes:
4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support)
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Andy Gross [Fri, 30 Nov 2018 01:28:48 +0000 (19:28 -0600)]
Merge branch 'qcs404-topic-revised' into arm64-for-4.21-3
Andy Gross [Fri, 30 Nov 2018 01:25:42 +0000 (19:25 -0600)]
Merge branch 'arm64-for-4.21' into arm64-for-4.21-3
Andy Gross [Fri, 30 Nov 2018 01:25:23 +0000 (19:25 -0600)]
Merge tag 'qcom-fixes-for-4.20-rc1' into arm64-for-4.21-3
Qualcomm ARM64 DT Fixes for 4.20-rc1
* Fix reserved gpio ranges for SDM845 and MSM8998
Neil Armstrong [Sun, 18 Nov 2018 13:50:24 +0000 (14:50 +0100)]
arm64: dts: meson-gx: Add Internal Clock Measurer node
The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal
clock paths frequencies.
This patch adds the node in the top-level meson-gx dtsi.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Viresh Kumar [Fri, 16 Nov 2018 10:04:24 +0000 (15:34 +0530)]
arm64: dts: amlogic: Add all CPUs in cooling maps
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.
Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.
Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Neil Armstrong [Fri, 16 Nov 2018 15:15:39 +0000 (16:15 +0100)]
arm64: dts: meson: add libretech aml-s805x-ac board
Add Libretech aml-s805x-ac board (aka 'La Frite') support
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Fri, 16 Nov 2018 15:15:38 +0000 (16:15 +0100)]
dt-bindings: arm: amlogic: add libretech aml-s805x-ac bindings
Add bindings for the Libretech aml-s805x-ac board, aka 'La Frite'.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
He Yangxuan [Sat, 10 Nov 2018 03:39:04 +0000 (11:39 +0800)]
dt-bindings: arm: amlogic: Add Phicomm N1
Add bindings documentation for the Phicomm N1.
Signed-off-by: He Yangxuan <yangxuan8282@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
He Yangxuan [Sat, 10 Nov 2018 03:39:03 +0000 (11:39 +0800)]
dt-bindings: Add vendor prefix for PHICOMM Co., Ltd.
PHICOMM Co., Ltd. is a hardware provider headquartered in Shanghai, it's
product includes router and smart devices.
Signed-off-by: He Yangxuan <yangxuan8282@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
He Yangxuan [Sat, 10 Nov 2018 03:39:02 +0000 (11:39 +0800)]
arm64: dts: meson-gxl: add support for phicomm n1
This patch adds support for the Phicomm N1. This device based on P230 reference design.
And this box doesn't have cvbs, so disable related section in device tree.
Signed-off-by: He Yangxuan <yangxuan8282@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Fri, 9 Nov 2018 14:04:44 +0000 (15:04 +0100)]
arm64: dts: meson: consistently disable pin bias
On Amlogic chipsets, the bias set through pinconf applies to the pad
itself, not only the GPIO function. This means that even when we change
the function of the pad from GPIO to anything else, the bias previously
set still applies.
As we have seen with the eMMC, depending on the bias type and the function,
it may trigger problems.
The underlying issue is that we inherit whatever was left by previous user
of the pad (pinconf, u-boot or the ROM code). As a consequence, the actual
setup we will get is undefined.
There is nothing mentioned in the documentation about pad bias and pinmux
function, however leaving it undefined is not an option.
This change consistently disable the pad bias for every pinmux functions.
It seems to work well, we can only assume that the necessary bias (if any)
is already provided by the pin function itself.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Fri, 9 Nov 2018 14:04:43 +0000 (15:04 +0100)]
arm64: dts: meson: disable pad bias for mmc pinmuxes
In some cases (such as a boot from SPI) the bootloader or the ROM code may
leave a bias pull-down on the mmc pins. If so the MMC will fail during the
initialisation.
Explicitly disabling the pinmux solves the problem.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Fri, 9 Nov 2018 14:04:42 +0000 (15:04 +0100)]
arm64: dts: meson: remove extra subnode in mmc clk_gate pinmux
In the pinmux of the mmc clk_gate nodes, we define 2 subnodes. One for
the function definition, the other for the bias. This is not necessary
since we can define the function and the bias in the same subnode.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Fri, 9 Nov 2018 13:23:31 +0000 (14:23 +0100)]
arm64: dts: meson: s400: add bcm bluetooth device
Add broadcom bluetooth device on the s400
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
He Yangxuan [Fri, 9 Nov 2018 12:59:36 +0000 (20:59 +0800)]
arm64: dts: meson: p230: disable advertisement EEE for GbE.
This patch disable EEE advertisement for P230 board (DWMAC + RTL8211F).
If not disable it, the network connection is not stable, will got issues
like throughput drop or broken link.
Signed-off-by: He Yangxuan <yangxuan8282@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Thu, 8 Nov 2018 13:53:52 +0000 (14:53 +0100)]
arm64: dts: meson-axg: enable SCPI
Enable SCPI on the axg platform, with cpu clock and hwmon
(core temperature) support
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Thu, 8 Nov 2018 13:53:51 +0000 (14:53 +0100)]
Documentation: bindings: Add missing Amlogic SCPI sensor bindings
amlogic,meson-gxbb-scpi-sensors is both the driver and DT but is not
documented. Just add it to amlogic's scpi documentation
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Thu, 8 Nov 2018 13:53:50 +0000 (14:53 +0100)]
arm64: dts: meson-axg: correct sram shared mem unit-address
Correct the unit-address in the node name of the SRAM shared memory
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Thu, 8 Nov 2018 13:53:49 +0000 (14:53 +0100)]
arm64: dts: meson-axg: fix mailbox address
MHU mailbox address is wrong. Fixing it enables the mailboxes on the A113.
These mailboxes are needed for SCPI
Fixes:
9d59b708500f ("arm64: dts: meson-axg: add initial A113D SoC DT support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Neil Armstrong [Thu, 8 Nov 2018 13:24:38 +0000 (14:24 +0100)]
arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
The hdmi_5v regulator must be enabled to provide power to the physical HDMI
PHY and enables the HDMI 5V presence loopback for the monitor.
Fixes:
b409f625a6d5 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Thu, 8 Nov 2018 13:07:44 +0000 (14:07 +0100)]
arm64: dts: meson-axg: add secure monitor
Add the secure monitor device to the axg platform.
With this, we can read the SoC serial number.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Thu, 8 Nov 2018 09:56:40 +0000 (10:56 +0100)]
arm64: dts: meson-axg: s400: add cts-rts to the bluetooth uart
The uart used with bluetooth chipset on the s400 has flow control
available. Let's enable it.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Neil Armstrong [Wed, 7 Nov 2018 10:45:50 +0000 (11:45 +0100)]
arm64: dts: meson-gxl-khadas-vim: fix GPIO lines names
The gpio line names were set in the pinctrl node instead of the gpio node,
at the time it was merged, it worked, but was obviously wrong.
This patch moves the properties to the gpio nodes.
Fixes:
60795933b709 ("ARM64: dts: meson-gxl-khadas-vim: Add GPIO lines names")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Neil Armstrong [Wed, 7 Nov 2018 10:45:49 +0000 (11:45 +0100)]
arm64: dts: meson-gxbb-odroidc2: fix GPIO lines names
The gpio line names were set in the pinctrl node instead of the gpio node,
at the time it was merged, it worked, but was obviously wrong.
This patch moves the properties to the gpio nodes.
Fixes:
b03c7d6438bb ("ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Neil Armstrong [Wed, 7 Nov 2018 10:45:48 +0000 (11:45 +0100)]
arm64: dts: meson-gxbb-nanopi-k2: fix GPIO lines names
The gpio line names were set in the pinctrl node instead of the gpio node,
at the time it was merged, it worked, but was obviously wrong.
This patch moves the properties to the gpio nodes.
Fixes:
12ada0513d7a ("ARM64: dts: meson-gxbb-nanopi-k2: Add GPIO lines names")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Neil Armstrong [Wed, 7 Nov 2018 10:45:47 +0000 (11:45 +0100)]
arm64: dts: meson-gxl-libretech-cc: fix GPIO lines names
The gpio line names were set in the pinctrl node instead of the gpio node,
at the time it was merged, it worked, but was obviously wrong.
This patch moves the properties to the gpio nodes.
Fixes:
47884c5c746e ("ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Thu, 8 Nov 2018 09:51:56 +0000 (10:51 +0100)]
arm64: dts: meson-axg: fix dtc warning about unit address
section 2.2.1 of the DT specs says: " If the node has no reg property,
the @unit-address must be omitted and the node-name alone differentiates
the node from other nodes at the same level in the tree"
Simply replace the '@' with a '-' to fix this warning.
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Christian Hewitt [Sat, 13 Oct 2018 12:07:06 +0000 (16:07 +0400)]
arm64: dts: meson-gxl-s905x-khadas-vim enable Bluetooth
This enables Bluetooth support for the following models:
- Khadas VIM basic (AP6212) using firmware BCM43438A1.hcd
- Khadas VIM pro (AP6255) using firmware BCM4345C0.hcd
The AP6212 module used on the VIM basic has an ID clash with another
device. To get Bluetooth working you either need to apply a kernel
patch to drivers/bluetooth/btbcm.c so 0x2209 loads BCM43438A1 or the
BCM43438A1.hcd firmware must be renamed to BCM43430A1.hcd.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Viresh Kumar [Fri, 16 Nov 2018 10:04:28 +0000 (15:34 +0530)]
ARM64: dts: hisilicon: Add all CPUs in cooling maps
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.
Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.
Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Viresh Kumar [Fri, 16 Nov 2018 10:04:27 +0000 (15:34 +0530)]
arm64: dts: hi3660: Add missing cooling device properties for CPUs
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Mon, 29 Oct 2018 09:42:43 +0000 (15:12 +0530)]
arm64: dts: hisilicon: poplar: Standardize LED labels and triggers
For all 96Boards, the following standard is used for onboard LEDs.
green:user1 default-trigger: heartbeat
green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
green:user3 default-trigger: mmc1 (SD-card)
green:user4 default-trigger: none, panic-indicator
yellow:wlan default-trigger: phy0tx
blue:bt default-trigger: hci0-power
So lets adopt the same for Poplar, which is one of the 96Boards
Enterprise edition platform.
Due to absence of WLAN and BT support, corresponding LED nodes are not
considered.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Mon, 29 Oct 2018 09:42:42 +0000 (15:12 +0530)]
arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers
For all 96Boards, the following standard is used for onboard LEDs.
green:user1 default-trigger: heartbeat
green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
green:user3 default-trigger: mmc1 (SD-card)
green:user4 default-trigger: none, panic-indicator
yellow:wlan default-trigger: phy0tx
blue:bt default-trigger: hci0-power
So lets adopt the same for HiKey960 which is one of the 96Boards
CE platform.
Since there is no trigger available for onboard-storage UFS now, user2
trigger is set to none.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Mon, 29 Oct 2018 09:42:41 +0000 (15:12 +0530)]
arm64: dts: hisilicon: hikey: Standardize LED labels and triggers
For all 96Boards, the following standard is used for onboard LEDs.
green:user1 default-trigger: heartbeat
green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
green:user3 default-trigger: mmc1 (SD-card)
green:user4 default-trigger: none, panic-indicator
yellow:wlan default-trigger: phy0tx
blue:bt default-trigger: hci0-power
So lets adopt the same for HiKey, which is one of the 96Boards
CE platform.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Tue, 23 Oct 2018 19:06:55 +0000 (00:36 +0530)]
arm64: dts: hisilicon: hikey970: Add GPIO line names
Add GPIO line names for HiSilicon HiKey970 board based on HI3670 SoC.
The Line names are derived from "hikey970-schematics.pdf" document and
named in conjunction with 96Boards CE Specification v1.0.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Tue, 23 Oct 2018 19:06:54 +0000 (00:36 +0530)]
arm64: dts: hisilicon: hikey970: Enable on-board UARTs
Enable on-board UARTs on HiSilicon HiKey970 board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Tue, 23 Oct 2018 19:06:53 +0000 (00:36 +0530)]
arm64: dts: hisilicon: hi3670: Add UART nodes
Add UART nodes for HiSilicon HI3670 SoC and also relevant pinmux/pinconf
entries.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Tue, 23 Oct 2018 19:06:52 +0000 (00:36 +0530)]
arm64: dts: hisilicon: hi3670: Add GPIO controller support
Add GPIO controller support for HiSilicon HI3670 SoC based on ARM
Primecell PL061 GPIO controller.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Linus Walleij [Thu, 15 Feb 2018 15:12:29 +0000 (16:12 +0100)]
ARM: dts: Modernize the Vexpress PL111 integration
The Versatile Express was submitted with the actual display
bridges unconnected (but defined in the device tree) and
mock "panels" encoded in the device tree node of the PL111
controller.
This doesn't even remotely describe the actual Versatile
Express hardware. Exploit the SiI9022 bridge by connecting
the PL111 pads to it, making it use EDID or fallback values
to drive the monitor.
The also has to use the reserved memory through the
CMA pool rather than by open coding a memory region and
remapping it explicitly in the driver. To achieve this,
a reserved-memory node must exist in the root of the
device tree, so we need to pull that out of the
motherboard .dtsi include files, and push it into each
top-level device tree instead.
We do the same manouver for all the Versatile Express
boards, taking into account the different location of the
video RAM depending on which chip select is used on
each platform.
This plays nicely with the new PL111 DRM driver and
follows the standard ways of assigning bridges and
memory pools for graphics.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Tested-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Martin Blumenstingl [Fri, 16 Nov 2018 20:42:35 +0000 (21:42 +0100)]
ARM: dts: meson: add the clock inputs for the Meson timer
The Meson Timer IP block has two clock inputs:
- clk81 for using the system clock as timebase
- xtal for a timebase with 1us, 10us, 100us and 1ms resolution
The clocksource driver does not use these yet, but it's still a good
idea to add them as this describes how the hardware actually works
internally.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Martin Blumenstingl [Fri, 16 Nov 2018 20:42:34 +0000 (21:42 +0100)]
ARM: dts: meson: add the TIMER B/C/D interrupts
The timer on Meson6/Meson8/Meson8b SoCs has four internal timer events.
For each of these a separate interrupt exists.
Pass these interrupts to allow using the timers other than TIMER A.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Fri, 9 Nov 2018 14:04:45 +0000 (15:04 +0100)]
ARM: dts: meson: consistently disable pin bias
On Amlogic chipsets, the bias set through pinconf applies to the pad
itself, not only the GPIO function. This means that even when we change
the function of the pad from GPIO to anything else, the bias previously
set still applies.
As we have seen with the eMMC, depending on the bias type and the function,
it may trigger problems.
The underlying issue is that we inherit whatever was left by previous user
of the pad (pinconf, u-boot or the ROM code). As a consequence, the actual
setup we will get is undefined.
There is nothing mentioned in the documentation about pad bias and pinmux
function, however leaving it undefined is not an option.
This change consistently disable the pad bias for every pinmux functions.
It seems to work well, we can only assume that the necessary bias (if any)
is already provided by the pin function itself.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Andy Gross [Thu, 15 Nov 2018 19:35:10 +0000 (11:35 -0800)]
ARM: dts: qcom: Remove Arrow SD600 eval board
This patch removes support for the APQ8064 based Arrow SD600 eval
board. This board was never sold publicly and had very limited
distribution. As such, we are removing this board and no longer
going to support it.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Douglas Anderson [Mon, 5 Nov 2018 21:09:20 +0000 (13:09 -0800)]
ARM: dts: qcom: Add SoC-specific string for sdhci-msm-v4 nodes
As per upstream discussion [1], we should have an SoC-specific
compatible string for Qualcomm's SDHCI nodes. Let's add it.
[1] https://lkml.kernel.org/r/
20181105203657.GA32282@bogus
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Brian Masney [Wed, 28 Nov 2018 09:53:35 +0000 (04:53 -0500)]
ARM: dts: qcom: msm8974-hammerhead: correct gpios property on magnetometer
This patch correctly sets the gpios property for the ak8963
magnetometer's DRDY pin so that interrupts work properly.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Dinh Nguyen [Thu, 18 Oct 2018 18:57:01 +0000 (13:57 -0500)]
arm64: dts: stratix10: use "altr,stratix10-rst-mgr" binding
The standard reset-simple driver the uses the "altr,rst-mgr" binding is
not getting initialized early enough in the boot process, so timers
that the kernel needs are still left in reset. Thus an early
reset driver was created. This early reset driver is only for the
SoCFPGA 32-bit platform.
The Stratix10 platform does not need any of the timers that in reset to
boot, thus we don't need to early reset driver. Therefore, use the
"altr,stratix10-rst-mgr" binding for the reset-simple platform driver on
the Stratix10 platform.
Also remove the "altr,modrst-offset" property because the driver no
longer needs it.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Simon Goldschmidt [Mon, 5 Nov 2018 20:39:00 +0000 (21:39 +0100)]
ARM: dts: socfpga: use tabs for indentation
In two of the gen5 socfpga devicetree files, there are some lines
indented using spaces instead of tabs.
Fix this by correctly indenting them with tabs.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Dinh Nguyen [Thu, 8 Nov 2018 16:10:57 +0000 (10:10 -0600)]
arm: dts: socfpga: remove dma-mask property
The dma-mask property has been removed from the NAND driver. Remove the
property from the DTS files.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Simon Goldschmidt [Mon, 5 Nov 2018 20:27:27 +0000 (21:27 +0100)]
arm: dts: socfpga*.dts*: use SPDX-License-Identifier
Follow the recent trend for the license description.
This is also in an effort to fully sync the devicetrees with U-Boot.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Manivannan Sadhasivam [Tue, 23 Oct 2018 19:06:51 +0000 (00:36 +0530)]
arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board
Add pinctrl support based on "pinctrl-single" driver for HiKey970
development board from HiSilicon.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Fri, 21 Sep 2018 06:01:02 +0000 (23:01 -0700)]
arm64: dts: hisilicon: Source SoC clock for UART6
Remove fixed clock and source SoC clock for UART6 for
HiSilicon Hi3670 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Fri, 21 Sep 2018 06:01:01 +0000 (23:01 -0700)]
arm64: dts: hisilicon: Add clock nodes for Hi3670 SoC
Add clock nodes for HiSilicon Hi3670 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Phil Edworthy [Wed, 21 Nov 2018 10:08:44 +0000 (10:08 +0000)]
ARM: dts: r9a06g032: Correct the GIC DT node name
Harmless mistake, but it's incorrect. The DT spec provides recommendations
for the node names:
"The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model. If appropriate, the
name should be one of the following choices:
...
interrupt-controller"
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Fabrizio Castro [Thu, 8 Nov 2018 17:04:43 +0000 (17:04 +0000)]
ARM: dts: iwg23s-sbc: Add QSPI flash support
This commit adds QSPI flash support to the iwg23s board specific
device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Fabrizio Castro [Thu, 8 Nov 2018 17:04:42 +0000 (17:04 +0000)]
ARM: dts: r8a77470: Add QSPI support
Add QSPI[01] support to the RZ/G1C SoC specific device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Wed, 7 Nov 2018 12:06:43 +0000 (12:06 +0000)]
ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVB
Adding pinctrl support for EtherAVB interface.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 26 Oct 2018 08:48:29 +0000 (09:48 +0100)]
ARM: dts: iwg23s-sbc: Enable cmt0
This patch enables cmt0 support on the iWave iwg23s sbc.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 26 Oct 2018 08:48:28 +0000 (09:48 +0100)]
ARM: dts: r8a77470: Add CMT SoC specific support
Add CMT[01] support to r8a77470 SoC DT.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>