drm/i915/ppgtt: Break loop in gen8_ppgtt_clear_range failure path

commit 00245266b4be4fbe989ee073663f56716da6c1f3 upstream.

If for some reason [1], the page directory/table does not exist, clear_range
would end up in an infinite while loop.

Introduced by commit 06fda602dbca ("drm/i915: Create page table allocators").

[1] This is already being addressed in one of Mika's patches:
http://mid.gmane.org/1432314314-23530-17-git-send-email-mika.kuoppala@intel.com

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reported-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: clean up radeon_audio_enable

commit 010621936103fcfc15375ccdc92c0f583923d489 upstream.

- make it static
- fix mask/bool handling for last param

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: take the mode_config mutex when dealing with hpds (v2)

commit 39fa10f7e21574a70cecf1fed0f9b36535aa68a0 upstream.

Since we are messing with state in the worker.

v2: drop the changes in the mst worker

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atomic: fix out of bounds read in for_each_*_in_state helpers

commit 60f207a5b6d8f23c2e8388b415e8d5c7311cc79d upstream.

for_each_*_in_state validate array index after
access to array elements, thus perform out of bounds read.

Fix this by validating index in the first place and read
array element iff validation was successful.

Fixes: df63b9994eaf ("drm/atomic: Add for_each_{connector,crtc,plane}_in_state helper macros")
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: ptn3460: Include linux/gpio/consumer.h

commit dad3c3503462f59c6bec7edfa19dbde1857962c0 upstream.

If GPIOLIB=n and asm-generic/gpio.h is not used:

    drivers/gpu/drm/bridge/ptn3460.c: In function ‘ptn3460_pre_enable’:
    drivers/gpu/drm/bridge/ptn3460.c:135: error: implicit declaration of function ‘gpiod_set_value’
    drivers/gpu/drm/bridge/ptn3460.c: In function ‘ptn3460_probe’:
    drivers/gpu/drm/bridge/ptn3460.c:333: error: implicit declaration of function ‘devm_gpiod_get’
    drivers/gpu/drm/bridge/ptn3460.c:333: warning: assignment makes pointer from integer without a cast
    drivers/gpu/drm/bridge/ptn3460.c:340: error: implicit declaration of function ‘gpiod_direction_output’
    drivers/gpu/drm/bridge/ptn3460.c:346: warning: assignment makes pointer from integer without a cast

Add the missing #include <linux/gpio/consumer.h> to fix this.

Fixes: af478d8823 ("drm/bridge: ptn3460: use gpiod interface")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/qxl: Do not leak memory if qxl_release_list_add fails

commit 8451cc964c1d193b989c41a44e5e77109cc696f8 upstream.

If the function fails reference counter to the object is not decremented
causing leaks.
This is hard to spot as it happens only on very low memory situations.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/qxl: Do not cause spice-server to clean our objects

commit 2fa19535ca6abcbfd1ccc9ef694db52f49f77747 upstream.

If objects are moved back from system memory to VRAM (and spice id
created again) memory is already initialized so we need to set flag
to not clear memory.
If you don't do it after a while using desktop many images turns to
black or transparents.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/tegra: dpaux: Fix transfers larger than 4 bytes

commit 3c1dae0a07c651526f8e878d223a88f82caa5a50 upstream.

The DPAUX read/write FIFO registers aren't sequential in the register
space, causing transfers larger than 4 bytes to cause accesses to non-
existing FIFO registers.

Fixes: 6b6b604215c6 ("drm/tegra: Add eDP support")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: make sure mst_primary mstb is valid in work function

commit 9254ec496a1dbdddeab50021a8138dc627a8166a upstream.

This validates the mst_primary under the lock, and then calls
into the check and send function. This makes the code a lot
easier to understand the locking rules in.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: take lock around looking up the branch device on hpd irq

commit 9eb1e57f564d4e6e10991402726cc83fe0b9172f upstream.

If we are doing an MST transaction and we've gotten HPD and we
lookup the device from the incoming msg, we should take the mgr
lock around it, so that mst_primary and mstb->ports are valid.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: close deadlock in connector destruction.

commit 6b8eeca65b18ae77e175cc2b6571731f0ee413bf upstream.

I've only seen this once, and I failed to capture the
lockdep backtrace, but I did some investigations.

If we are calling into the MST layer from EDID probing,
we have the mode_config mutex held, if during that EDID
probing, the MST hub goes away, then we can get a deadlock
where the connector destruction function in the driver
tries to retake the mode config mutex.

This offloads connector destruction to a workqueue,
and avoid the subsequenct lock ordering issue.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vgem: Set unique to "vgem"

commit fa2f97dd33c2c32a06a5ea7f6e87af06a2e26baa upstream.

Since there's only one global instance ever we don't need to have
anything fancy. Stops a WARNING in the get_unique ioctl that the
unique name isn't set.

Reportedy-and-tested-by: Fabio Coatti <fabio.coatti@gmail.com>
Cc: Fabio Coatti <fabio.coatti@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: arm-ccn: Fix node->XP config conversion

commit a18f8e97fe69195823d7fb5c68a8d6565f39db4b upstream.

Events defined as watchpoints on nodes must have their config values
converted so that they apply to the respective node's XP. The
function setting new values was using wrong mask for the "port" field,
resulting in corrupted value. Fixed now.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: at91/dt: update udc compatible strings

commit 6540165cf41655810ee67b78f01537af022a636a upstream.

at91sam9g45, at91sam9x5 and sama5 SoCs should not use
"atmel,at91sam9rl-udc" for their USB device compatible property since
this compatible is attached to a specific hardware bug fix.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: at91/dt: trivial: fix USB udc compatible string

commit 50f0a44991516b5b9744ecb2c080c2ec6ad21b25 upstream.

To please checkpatch and the tiresome reader, add the "atmel," prefix to the
USB udc compatible string.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty/serial: at91: RS485 mode: 0 is valid for delay_rts_after_send

commit 8687634b7908c42eb700e0469e110e02833611d1 upstream.

In RS485 mode, we may want to set the delay_rts_after_send value to 0.
In the datasheet, the 0 value is said to "disable" the Transmitter Timeguard but
this is exactly the expected behavior if we want no delay...

Moreover, if the value was set to non-zero value by device-tree or earlier
ioctl command, it was impossible to change it back to zero.

Reported-by: Sami Pietikäinen <Sami.Pietikainen@wapice.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodes

commit aabbe8f1a561dd8318e693830d9ae377c9a04d2b upstream.

The xdmac channel configuration is done in one cell not two. This error
prevents from probing devices correctly.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 83906783b766 ("ARM: at91/dt: sama5d4: add aes, sha and tdes nodes")
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: at91/dt: sama5d4ek: mci0 uses slot 0

commit ea25525ce0d195724fead07fe6562fe478a3bf6f upstream.

Mci0 uses slot 0 not 1.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 7a4752677c44 ("ARM: at91: dt: add device tree file for SAMA5D4ek board")
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: Do a full clone when splitting discard bios

commit f3f5da624e0a891c34d8cd513c57f1d9b0c7dadc upstream.

This fixes a data corruption bug when using discard on top of MD linear,
raid0 and raid10 personalities.

Commit 20d0189b1012 "block: Introduce new bio_split()" permits sharing
the bio_vec between the two resulting bios. That is fine for read/write
requests where the bio_vec is immutable. For discards, however, we need
to be able to attach a payload and update the bio_vec so the page can
get mapped to a scatterlist entry. Therefore the bio_vec can not be
shared when splitting discards and we must do a full clone.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Seunguk Shin <seunguk.shin@samsung.com>
Tested-by: Seunguk Shin <seunguk.shin@samsung.com>
Cc: Seunguk Shin <seunguk.shin@samsung.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: loop: avoiding too many pending per work I/O

commit 4d4e41aef9429872ea3b105e83426941f7185ab6 upstream.

If there are too many pending per work I/O, too many
high priority work thread can be generated so that
system performance can be effected.

This patch limits the max_active parameter of workqueue as 16.

This patch fixes Fedora 22 live booting performance
regression when it is booted from squashfs over dm
based on loop, and looks the following reasons are
related with the problem:

- not like other filesyststems(such as ext4), squashfs
is a bit special, and I observed that increasing I/O jobs
to access file in squashfs only improve I/O performance a
little, but it can make big difference for ext4

- nested loop: both squashfs.img and ext3fs.img are mounted
as loop block, and ext3fs.img is inside the squashfs

- during booting, lots of tasks may run concurrently

Fixes: b5dd2f6047ca108001328aac0e8588edd15f1778
Cc: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: loop: convert to per-device workqueue

commit f4aa4c7bbac6c4afdd4adccf90898c1a3685396d upstream.

Documentation/workqueue.txt:
If there is dependency among multiple work items used
during memory reclaim, they should be queued to separate
wq each with WQ_MEM_RECLAIM.

Loop devices can be stacked, so we have to convert to per-device
workqueue. One example is Fedora live CD.

Fixes: b5dd2f6047ca108001328aac0e8588edd15f1778
Cc: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: Add missing mmc_blk_put() in power_ro_lock_show()

commit 9098f84cced870f54d8c410dd2444cfa61467fa0 upstream.

Enclosing mmc_blk_put() is missing in power_ro_lock_show() sysfs handler,
let's add it.

Fixes: add710eaa886 ("mmc: boot partition ro lock support")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm btree: silence lockdep lock inversion in dm_btree_del()

commit 1c7518794a3647eb345d59ee52844e8a40405198 upstream.

Allocate memory using GFP_NOIO when deleting a btree.  dm_btree_del()
can be called via an ioctl and we don't want to recurse into the FS or
block layer.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: allocate the cell_sort_array dynamically

commit a822c83e47d97cdef38c4352e1ef62d9f46cfe98 upstream.

Given the pool's cell_sort_array holds 8192 pointers it triggers an
order 5 allocation via kmalloc.  This order 5 allocation is prone to
failure as system memory gets more fragmented over time.

Fix this by allocating the cell_sort_array using vmalloc.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm btree remove: fix bug in redistribute3

commit 4c7e309340ff85072e96f529582d159002c36734 upstream.

redistribute3() shares entries out across 3 nodes.  Some entries were
being moved the wrong way, breaking the ordering.  This manifested as a
BUG() in dm-btree-remove.c:shift() when entries were removed from the
btree.

For additional context see:
https://www.redhat.com/archives/dm-devel/2015-May/msg00113.html

Signed-off-by: Dennis Yang <shinrairis@gmail.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm space map metadata: fix occasional leak of a metadata block on resize

commit 6096d91af0b65a3967139b32d5adbb3647858a26 upstream.

The metadata space map has a simplified 'bootstrap' mode that is
operational when extending the space maps.  Whilst in this mode it's
possible for some refcount decrement operations to become queued (eg, as
a result of shadowing one of the bitmap indexes).  These decrements were
not being applied when switching out of bootstrap mode.

The effect of this bug was the leaking of a 4k metadata block.  This is
detected by the latest version of thin_check as a non fatal error.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm stats: fix divide by zero if 'number_of_areas' arg is zero

commit dd4c1b7d0c95be1c9245118a3accc41a16f1db67 upstream.

If the number_of_areas argument was zero the kernel would crash on
div-by-zero.  Add better input validation.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: fix race when issuing a POLICY_REPLACE operation

commit fb4100ae7f312c3d614b37621c2b17b3b7cf65f8 upstream.

There is a race between a policy deciding to replace a cache entry,
the core target writing back any dirty data from this block, and other
IO threads doing IO to the same block.

This sort of problem is avoided most of the time by the core target
grabbing a bio prison cell before making the request to the policy.
But for a demotion the core target doesn't know which block will be
demoted, so can't do this in advance.

Fix this demotion race by introducing a callback to the policy interface
that allows the policy to grab the cell on behalf of the core target.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() function

commit 3496810663922617d4b706ef2780c279252ddd6a upstream.

virt_dev->num_cached_rings counts on freed ring and is not updated
correctly. In xhci_free_or_cache_endpoint_ring() function, the free ring
is added into cache and then num_rings_cache is incremented as below:
virt_dev->ring_cache[rings_cached] =
virt_dev->eps[ep_index].ring;
virt_dev->num_rings_cached++;
here, free ring pointer is added to a current index and then
index is incremented.
So current index always points to empty location in the ring cache.
For getting available free ring, current index should be decremented
first and then corresponding ring buffer value should be taken from ring
cache.

But In function xhci_endpoint_init(), the num_rings_cached index is
accessed before decrement.
virt_dev->eps[ep_index].new_ring =
virt_dev->ring_cache[virt_dev->num_rings_cached];
virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
virt_dev->num_rings_cached--;
This is bug in manipulating the index of ring cache.
And it should be as below:
virt_dev->num_rings_cached--;
virt_dev->eps[ep_index].new_ring =
virt_dev->ring_cache[virt_dev->num_rings_cached];
virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;

Signed-off-by: Aman Deep <aman.deep@samsung.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: lpm: set lpm_capable for root hub device

commit 2d2a316765d956bc5cb6bb367b2ec52ca59ab8e9 upstream.

Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports
Link PM.") removed the code to set lpm_capable for USB 3.0 super-speed
root hub. The intention of that change was to avoid touching usb core
internal field, a.k.a. lpm_capable, and let usb core to set it by
checking U1 and U2 exit latency values in the descriptor.

Usb core checks and sets lpm_capable in hub_port_init(). Unfortunately,
root hub is a special usb device as it has no parent. Hub_port_init()
will never be called for a root hub device. That means lpm_capable will
by no means be set for the root hub. As the result, lpm isn't functional
at all in Linux kernel.

This patch add the code to check and set lpm_capable when registering a
root hub device. It could be back-ported to kernels as old as v3.15,
that contains the Commit 25cd2882e2fc ("usb/xhci: Change how we indicate
a host supports Link PM.").

Reported-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: OHCI: Fix race between ED unlink and URB submission

commit 7d8021c967648accd1b78e5e1ddaad655cd2c61f upstream.

This patch fixes a bug introduced by commit 977dcfdc6031 ("USB: OHCI:
don't lose track of EDs when a controller dies").  The commit changed
ed_state from ED_UNLINK to ED_IDLE too early, before finish_urb() had
been called.  The user-visible consequence is that the driver
occasionally crashes or locks up when an URB is submitted while
another URB for the same endpoint is being unlinked.

This patch moves the ED state change later, to the right place.  The
drawback is that now we may unnecessarily execute some instructions
multiple times when a controller dies.  Since controllers dying is an
exceptional occurrence, a little wasted time won't matter.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Heiko Przybyl <lil_tux@web.de>
Tested-by: Heiko Przybyl <lil_tux@web.de>
Fixes: 977dcfdc60311e7aa571cabf6f39c36dde13339e
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: Destroy serial_minors IDR on module exit

commit d23f47d4927fd2f61b3a754d83c7bcec215b5cfe upstream.

Destroy serial_minors IDR on module exit, reclaiming the allocated memory.

This was detected by the following semantic patch (written by Luis
Rodriguez <mcgrof@suse.com>)

<SmPL>
@ defines_module_init @
declarer name module_init, module_exit;
declarer name DEFINE_IDR;
identifier init;
@@

module_init(init);

@ defines_module_exit @
identifier exit;
@@

module_exit(exit);

@ declares_idr depends on defines_module_init && defines_module_exit @
identifier idr;
@@

DEFINE_IDR(idr);

@ on_exit_calls_destroy depends on declares_idr && defines_module_exit @
identifier declares_idr.idr, defines_module_exit.exit;
@@

exit(void)
{
 ...
 idr_destroy(&idr);
 ...
}

@ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @
identifier declares_idr.idr, defines_module_exit.exit;
@@

exit(void)
{
 ...
 +idr_destroy(&idr);
}
</SmPL>

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: option: add 2020:4000 ID

commit f6d7fb37f92622479ef6da604f27561f5045ba1e upstream.

Add device Olivetti Olicard 300 (Network Connect: MT6225) - IDs 2020:4000.

T:  Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2020 ProdID=4000 Rev=03.00
S:  Manufacturer=Network Connect
S:  Product=MT6225
C:  #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Signed-off-by: Claudio Cappelli <claudio.cappelli.linux@gmail.com>
Suggested-by: Lars Melin <larsm17@gmail.com>
[johan: amend commit message with devices info ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cp210x: add ID for Aruba Networks controllers

commit f98a7aa81eeeadcad25665c3501c236d531d4382 upstream.

Add the USB serial console device ID for Aruba Networks 7xxx series
controllers which have a USB port for their serial console.

Signed-off-by: Peter Sanford <peter@sanford.io>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: host: rely on port_mode to call musb_start()

commit be9d39881fc4fa39a64b6eed6bab5d9ee5125344 upstream.

Currently, we're calling musb_start() twice for DRD ports
in some situations. This has been observed to cause enumeration
issues after suspend/resume cycles with AM335x.

In order to fix the problem, we just have to fix the check
on musb_has_gadget() so that it only returns true if
current mode is Host and ignore the fact that we have or
not a gadget driver loaded.

Fixes: ae44df2e21b5 (usb: musb: call musb_start() only once in OTG mode)
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: f_mass_storage: limit number of reported LUNs

commit 8515bac01a983d277148e4fcc5f235bf603de577 upstream.

Mass storage function created via configfs always reports eight LUNs
to the hosts even if only one LUN has been configured.  Adjust the
number when the USB function is allocated based on LUNs that user
has created.

Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: mv_udc_core: fix phy_regs I/O memory leak

commit 53e20f2eb161fbe9eea28b54dccc870cec94eca2 upstream.

There was an omission in transition to devm_xxx resource handling.
iounmap(udc->phy_regs) were removed, but ioremap() was left
without devm_.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 3517c31a8ece6 ("usb: gadget: mv_udc: use devm_xxx for probe")
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: do not set cancel function on synchronous {read,write}

commit 4088acf1e845aba35f30fb91dee10649edbd0e84 upstream.

do not try to set cancel function in synchronous operations in
ffs_epfile_{read,write}_iter.

Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: composite: Fix NULL pointer dereference

commit b4c21f0bdd2c0cd5d5be1bb56f0a28dae5041eed upstream.

commit f563d230903210acc ("usb: gadget: composite: add req_match method
to usb_function") accesses cdev->config even before set config
is invoked causing a NULL pointer dereferencing error while running
Lecroy Mass Storage Compliance test.

Fix it here by accessing cdev->config only if it is non NULL.

Fixes: commit f563d230903210acc ("usb: gadget: composite: add req_match
method to usb_function").

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: berlin-usb: fix divider for BG2CD

commit 96696a9df935d15fd2e89603454c20a692ec232a upstream.

The marvell,berlin2cd-usb-phy compatible incorrectly sets the PLL
divider to BG2's value instead of BG2CD/BG2Q's. Change it to the right
value.

Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: phy: mxs: suspend to RAM causes NULL pointer dereference

commit 543aa4867d4a2dff5fc11e1b688197ee3bad7f89 upstream.

Triggering suspend to RAM via sysfs on a i.MX28 causes a NULL pointer
dereference. This patch avoids the oops in mxs_phy_get_vbus_status()
by aborting since there is no syscon available.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: efdbd3a5d6e ("usb: phy: mxs: do not set PWD.RXPWD1PT1 for low speed connection")
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function.

commit 4724e27114c4a7eceeee07db227a17fcab6f165c upstream.

The USB phy should initialize with power-off, and will be powered on
by the USB system when a cable connection is detected.

Having this pm_runtime_get_sync() during probe causes the phy to
*always* be powered on.
Removing it returns to sensible power management.

Fixes: 96be39ab34b77c6f6f5cd6ae03aac6c6449ee5c4
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: devio: fix a condition in async_completed()

commit 83ed07c5db71bc02bd646d6eb60b48908235cdf9 upstream.

Static checkers complain that the current condition is never true.  It
seems pretty likely that it's a typo and "URB" was intended instead of
"USB".

Fixes: 3d97ff63f899 ('usbdevfs: Use scatter-gather lists for large bulk transfers')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset

commit fb6d1f7df5d25299fd7b3e84b72b8851d3634764 upstream.

Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset.

Dissolve the function hub_port_finish_reset() completely and divide the
actions to be taken into those which need to be done after each reset
attempt and those which need to be done after the full procedure is
complete, and place them in the appropriate places in hub_port_reset().
Also, remove an unneeded forward declaration of hub_port_reset().

Verbose Problem Description:

USB 3.0 devices may be "lost for good" during a hub port reset.
This makes Linux unable to boot from USB 3.0 devices in certain
constellations of host controllers and devices, because the USB device is
lost during initialization, preventing the rootfs from being mounted.

The underlying problem is that in the affected constellations, during the
processing inside hub_port_reset(), the hub link state goes from 0 to
SS.inactive after the initial reset, and back to 0 again only after the
following "warm" reset.

However, hub_port_finish_reset() is called after each reset attempt and
sets the state the connected USB device based on the "preliminary" status
of the hot reset to USB_STATE_NOTATTACHED due to SS.inactive, yet when
the following warm reset is complete and hub_port_finish_reset() is
called again, its call to set the device to USB_STATE_DEFAULT is blocked
by usb_set_device_state() which does not allow taking USB devices out of
USB_STATE_NOTATTACHED state.

Thanks to Alan Stern for guiding me to the proper solution and how to
submit it.

Link: http://lkml.kernel.org/r/trinity-25981484-72a9-4d46-bf17-9c1cf9301a31-1432073240136%20()%203capp-gmx-bs27
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: Reset the transfer resource index on SET_INTERFACE

commit aebda618718157a69c0dc0adb978d69bc2b8723c upstream.

This fixes an issue introduced in commit b23c843992b6 (usb: dwc3:
gadget: fix DEPSTARTCFG for non-EP0 EPs) that made sure we would
only use DEPSTARTCFG once per SetConfig.

The trick is that we should use one DEPSTARTCFG per SetConfig *OR*
SetInterface. SetInterface was completely missed from the original
patch.

This problem became aparent after commit 76e838c9f776 (usb: dwc3:
gadget: return error if command sent to DEPCMD register fails)
added checking of the return status of device endpoint commands.

'Set Endpoint Transfer Resource' command was caught failing
occasionally. This is because the Transfer Resource
Index was not getting reset during a SET_INTERFACE request.

Finally, to fix the issue, was we have to do is make sure that
our start_config_issued flag gets reset whenever we receive a
SetInterface request.

To verify the problem (and its fix), all we have to do is run
test 9 from testusb with 'testusb -t 9 -s 2048 -a -c 5000'.

Tested-by: Huang Rui <ray.huang@amd.com>
Tested-by: Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
Fixes: b23c843992b6 (usb: dwc3: gadget: fix DEPSTARTCFG for non-EP0 EPs)
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: don't clear EP_BUSY too early

commit e18b7975c885bc3a938b9a76daf32957ea0235fa upstream.

In case of non-Isochronous transfers, we don't
want to clear DWC3_EP_BUSY flag until XferComplete
event. That's because XferInProgress was only enabled
so we can recycle TRBs and usb_requests quicker, but
there are still other pending requests being transferred.

In order to make sure we don't allow for another StartTransfer
command while the HW is still processing other transfers,
we must keep DWC3_EP_BUSY flag set and this what this patch
does.

Fixes: f3af36511e60 (usb: dwc3: gadget: always enable IOC on
bulk/interrupt transfers)
Reported-by: sundeep subbaraya <sundeep.lkml@gmail.com>
Tested-by: sundeep subbaraya <sundeep.lkml@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: return error if command sent to DEPCMD register fails

commit 76e838c9f7765f9a6205b4d558d75a66104bc60d upstream.

We need to return error to caller if command is not sent to
controller succesfully.

Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Fixes: 72246da40f37 (usb: Introduce DesignWare USB3 DRD Driver)
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: return error if command sent to DGCMD register fails

commit 891b1dc022955d36cf4c0f42d383226a930db7ed upstream.

We need to return error to caller if command is not sent to
controller succesfully.

Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Fixes: b09bb64239c8 (usb: dwc3: gadget: implement Global Command support)
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: force disable trim for SuperSSpeed S238

commit cda57b1b05cf7b8b99ab4b732bea0b05b6c015cc upstream.

This device loses blocks, often the partition table area, on trim.
Disable TRIM.
http://pcengines.ch/msata16a.htm

Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Do not blacklist M510DC

commit 9051bd393cf25e76dfb45409792719a854661500 upstream.

A new Micron drive was just announced, once again recycling the first
part of the model string. Add an underscore to the M510/M550 pattern to
avoid picking up the new DC drive.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit

commit af34d637637eabaf49406eb35c948cd51ba262a6 upstream.

Since no longer limiting max_sectors to BLK_DEF_MAX_SECTORS (commit 34b48db66e08),
data corruption may occur on ST380013AS drive configured on 82801JI (ICH10 Family)
SATA controller. This patch will allow the driver to limit max_sectors as before

 # cat /sys/block/sdb/queue/max_sectors_kb
 512

I was able to double the max_sectors_kb value up to 16384 on linux-4.2.0-rc2
before seeing corruption, but seems safer to use previous limit. Without this
patch max_sectors_kb will be 32767.

tj: Minor comment update.

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: add ATA_HORKAGE_NOTRIM

commit 71d126fd28de2d4d9b7b2088dbccd7ca62fad6e0 upstream.

Some devices lose data on TRIM whether queued or not.  This patch adds
a horkage to disable TRIM.

tj: Collapsed unnecessary if() nesting.

Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Expose TRIM capability in sysfs

commit f303074160d3401970ccae082014e1ee5a9a52c5 upstream.

Create a sysfs "trim" attribute for each ata_device that displays
whether DSM TRIM is "unsupported", "unqueued", "forced_unqueued"
(blacklisted) or "queued".

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Fall back to unqueued READ LOG EXT if the DMA variant fails

commit 5d3abf8ff67f49271a42c0f7fa4f20f9e046bf0e upstream.

Some devices advertise support for the READ/WRITE LOG DMA EXT commands
but fail when we try to issue them. This can lead to queued TRIM being
unintentionally disabled since the relevant feature flag is located in a
general purpose log page.

Fall back to unqueued READ LOG EXT if the DMA variant fails while
reading a log page.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: increase the timeout when setting transfer mode

commit d531be2ca2f27cca5f041b6a140504999144a617 upstream.

I have a ST4000DM000 disk. If Linux is booted while the disk is spun down,
the command that sets transfer mode causes the disk to spin up. The
spin-up takes longer than the default 5s timeout, so the command fails and
timeout is reported.

Fix this by increasing the timeout to 15s, which is enough for the disk to
spin up.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER

commit 08c85d2a599d967ede38a847f5594447b6100642 upstream.

Enabling AA on HP 250GB SATA disk VB0250EAVER causes errors:

[    3.788362] ata3.00: failed to enable AA (error_mask=0x1)
[    3.789243] ata3.00: failed to enable AA (error_mask=0x1)

Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk.

tj: Collected FPDMA_AA entries and updated comment.

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Do not blacklist Micron M500DC

commit 243918be6393f643e513a26e7882e6ae06ff7717 upstream.

Queued TRIM got disabled on Micron M500DC drives thanks to the
"Micron_M500*" pattern we had in place to accommodate the previous
generation of this drive family. Tweak the blacklist entry slightly so
we only disable queued TRIM for the non-DC variants of M500 drives.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entry

commit 1cf0f44811b754b64283b11ef0e60cb0de07b29c upstream.

SOC_DAPM_SINGLE("Playback AMP", ..) should not be under kcontrols. It
causes kernel crash (NULL pointer) when the mixers are listed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2552: Fix kernel crash when the codec is loaded but not part of a card

commit 80ba2669ec8c3e6517aa935001f6cb8809bf3df4 upstream.

If the card is not part of any card the tas_data->codec is NULL since it is
set only during snd_soc_codec_driver.probe, which is not yet called.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1]

commit a077e81ec61e07a7f86997d045109f06719fbffe upstream.

the enum of "DAC Polarity" should be wm8960_enum[1].

Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8903: Fix define for WM8903_VMID_RES_250K

commit ebb6ad73e645b8f2d098dd3c41d2ff0da4146a02 upstream.

VMID Control 0 BIT[2:1] is VMID Divider Enable and Select

00 = VMID disabled (for OFF mode)
01 = 2 x 50kΩ divider (for normal operation)
10 = 2 x 250kΩ divider (for low power standby)
11 = 2 x 5kΩ divider (for fast start-up)

So WM8903_VMID_RES_250K should be 2 << 1, which is 4.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8955: Fix setting wrong register for WM8955_K_8_0_MASK bits

commit 12c350050538c7dc779c083b7342bfd20f74949c upstream.

WM8955_K_8_0_MASK bits is controlled by WM8955_PLL_CONTROL_3 rather than
WM8955_PLL_CONTROL_2.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8737: Fixup setting VMID Impedance control register

commit 14ba3ec1de043260cecd9e828ea2e3a0ad302893 upstream.

According to the datasheet:
R10 (0Ah) VMID Impedance Control

BIT 3:2 VMIDSEL DEFAULT 00

DESCRIPTION: VMID impedance selection control
00: 75kΩ output
01: 300kΩ output
10: 2.5kΩ output

WM8737_VMIDSEL_MASK is 0xC (VMIDSEL - [3:2]),
so it needs to left shift WM8737_VMIDSEL_SHIFT bits for setting these bits.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: omap: fix up SND_OMAP_SOC_OMAP_ABE_TWL6040 dependency, again

commit 0574eab363ace70ef275d4caad6eadc458d33728 upstream.

I tried to fix this before and submitted a working patch, but after
some discussion we came up with what seemed to be a nicer solution,
resulting in commit 3d4cf65e2d ("ASoC: omap: fix up
SND_OMAP_SOC_OMAP_ABE_TWL6040 dependency"). Unfortunately, that
version was incomplete, and we still get this build error:

drivers/clk/clk-palmas.c:46:16: error: field 'hw' has incomplete type
drivers/clk/clk-palmas.c: In function 'to_palmas_clks_info':
drivers/clk/clk-palmas.c:54:74: warning: initialization from incompatible pointer type [-Winc

This happens only in randconfig builds that turn on MFD_PALMAS
on a platform other than OMAP2+ when COMPILE_TEST is set
but COMMON_CLK is not.

The new approach is only 'select COMMON_CLK_PALMAS' if we know
that we are on an OMAP5 platform and MFD_PALMAS is already set.
This patch has survived thousands of randconfig builds and I
don't see a remaining hole in the logic.

Fixes: 3d4cf65e2d ("ASoC: omap: fix up SND_OMAP_SOC_OMAP_ABE_TWL6040 dependency")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: imx-wm8962: Add a missing error check

commit 474ff0ae23b834e9fc18374d14bb5f3e7b3828b4 upstream.

My static checker complains that:

sound/soc/fsl/imx-wm8962.c:196 imx_wm8962_probe() warn:
we tested 'ret' before and it was 'false'

The intent was that we use "ret" to check imx_audmux_v2_configure_port().

Fixes: 8de2ae2a7f1f ('ASoC: fsl: add imx-wm8962 machine driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Otherwise, Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: qcom: remove incorrect dependencies

commit a7310c496f376b945e7e61f64d69c9c0a93ee1ee upstream.

Compile-tests show a warning for the newly added SND_SOC_STORM
symbol:

warning: (SND_SOC_STORM) selects SND_SOC_LPASS_CPU which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC && SND_SOC_QCOM)

The problem is that it can be selected for COMPILE_TEST on non-QCOM
builds, but the symbols it selects have a dependency.
Dropping the dependencies makes it work without warnings and no
other side-effects, because these are not user-visible.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f380dd3f3cd ("ASoC: qcom: Add ability to build QCOM drivers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: max98925: Fix mask for setting DAI invert mode

commit 0b51601d4504f46f585eed823485101390f0b588 upstream.

The M98925_DAI_WCI_MASK bit is not updated with current code.
To properly set the DAI invert mode, the mask should be
M98925_DAI_BCI_MASK | M98925_DAI_WCI_MASK.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5645: Init jack_detect_work before registering irq

commit 7ea3470a7277380248135a592a849e1c27960b2f upstream.

Prevents frequent panic on boot, if the irq handler rt5645_irq
gets called before the workqueue rt5645_jack_detect_work is
initialized.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: arizona: Fix noise generator gain TLV

commit 15575ed544910464715df5c45a44b9732e415b93 upstream.

The Arizona codec drivers had an incorrect dB scaling for the
noise generator gain that started at 0dB and went upwards.
Actually the highest setting is 0dB.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cx24116: fix a buffer overflow when checking userspace params

commit 1fa2337a315a2448c5434f41e00d56b01a22283c upstream.

The maximum size for a DiSEqC command is 6, according to the
userspace API. However, the code allows to write up much more values:
drivers/media/dvb-frontends/cx24116.c:983 cx24116_send_diseqc_msg() error: buffer overflow 'd->msg' 6 <= 23

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s5h1420: fix a buffer overflow when checking userspace params

commit 12f4543f5d6811f864e6c4952eb27253c7466c02 upstream.

The maximum size for a DiSEqC command is 6, according to the
userspace API. However, the code allows to write up to 7 values:
drivers/media/dvb-frontends/s5h1420.c:193 s5h1420_send_master_cmd() error: buffer overflow 'cmd->msg' 6 <= 7

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

saa7164: fix querycap warning

commit 534bc3e2ee93835badca753bedce8073c67caa92 upstream.

Fix the VIDIOC_QUERYCAP warning due to the missing device_caps. Don't fill
in the version field, the V4L2 core will do that for you.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af9013: Don't accept invalid bandwidth

commit d7b76c91f471413de9ded837bddeca2164786571 upstream.

If userspace sends an invalid bandwidth, it should either return
EINVAL or switch to auto mode.

This driver will go past an array and program the hardware on a
wrong way if this happens.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cx24117: fix a buffer overflow when checking userspace params

commit 82e3b88b679049f043fe9b03991d6d66fc0a43c8 upstream.

The maximum size for a DiSEqC command is 6, according to the
userspace API. However, the code allows to write up much more values:
drivers/media/dvb-frontends/cx24116.c:983 cx24116_send_diseqc_msg() error: buffer overflow 'd->msg' 6 <= 23

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cx18: add missing caps for the PCM video device

commit 2b4fd3ede3bab65ef5b97387b90899d11e4d3202 upstream.

The cx18 PCM video device didn't have any capabilities set, which caused a warnings
in the v4l2 core:

[    6.229393] ------------[ cut here ]------------
[    6.229414] WARNING: CPU: 1 PID: 593 at
drivers/media/v4l2-core/v4l2-ioctl.c:1025 v4l_querycap+0x41/0x70
[videodev]()
[    6.229415] Modules linked in: cx18_alsa mxl5005s s5h1409
tuner_simple tuner_types cs5345 tuner intel_rapl iosf_mbi
x86_pkg_temp_thermal coretemp raid1 snd_hda_codec_realtek kvm_intel
snd_hda_codec_generic snd_hda_codec_hdmi kvm snd_oxygen(+) snd_hda_intel
snd_oxygen_lib snd_hda_controller snd_hda_codec snd_mpu401_uart iTCO_wdt
snd_rawmidi iTCO_vendor_support snd_hwdep crct10dif_pclmul crc32_pclmul
crc32c_intel snd_seq cx18 snd_seq_device ghash_clmulni_intel
videobuf_vmalloc tveeprom cx2341x snd_pcm serio_raw videobuf_core vfat
dvb_core fat v4l2_common snd_timer videodev snd lpc_ich i2c_i801 joydev
mfd_core mei_me media soundcore tpm_infineon soc_button_array tpm_tis
mei shpchp tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc binfmt_misc
i915 nouveau mxm_wmi wmi e1000e ttm i2c_algo_bit drm_kms_helper
[    6.229444]  drm ptp pps_core video
[    6.229446] CPU: 1 PID: 593 Comm: v4l_id Not tainted
3.19.3-200.fc21.x86_64 #1
[    6.229447] Hardware name: Gigabyte Technology Co., Ltd.
Z87-D3HP/Z87-D3HP-CF, BIOS F6 01/20/2014
[    6.229448]  0000000000000000 00000000d12b1131 ffff88042dacfc28
ffffffff8176e215
[    6.229449]  0000000000000000 0000000000000000 ffff88042dacfc68
ffffffff8109bc1a
[    6.229451]  ffffffffa0594000 ffff88042dacfd90 0000000000000000
ffffffffa04e2140
[    6.229452] Call Trace:
[    6.229466]  [<ffffffff8176e215>] dump_stack+0x45/0x57
[    6.229469]  [<ffffffff8109bc1a>] warn_slowpath_common+0x8a/0xc0
[    6.229472]  [<ffffffff8109bd4a>] warn_slowpath_null+0x1a/0x20
[    6.229474]  [<ffffffffa04ca401>] v4l_querycap+0x41/0x70 [videodev]
[    6.229477]  [<ffffffffa04ca6cc>] __video_do_ioctl+0x29c/0x320 [videodev]
[    6.229479]  [<ffffffff81227131>] ? do_last+0x2f1/0x1210
[    6.229491]  [<ffffffffa04cc776>] video_usercopy+0x366/0x5d0 [videodev]
[    6.229494]  [<ffffffffa04ca430>] ? v4l_querycap+0x70/0x70 [videodev]
[    6.229497]  [<ffffffffa04cc9f5>] video_ioctl2+0x15/0x20 [videodev]
[    6.229499]  [<ffffffffa04c6794>] v4l2_ioctl+0x164/0x180 [videodev]
[    6.229501]  [<ffffffff8122e298>] do_vfs_ioctl+0x2f8/0x500
[    6.229502]  [<ffffffff8122e521>] SyS_ioctl+0x81/0xa0
[    6.229505]  [<ffffffff81774a09>] system_call_fastpath+0x12/0x17
[    6.229506] ---[ end trace dacd80d4b19277ea ]---

Added the necessary capabilities to stop this warning.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rc-core: fix dib0700 scancode generation for RC5

commit 4d298b8539ed59f1d69d3aa6e41a2c4908137612 upstream.

commit af3a4a9bbeb0 ("[media] dib0700: NEC scancode cleanup") cleaned
up the NEC scancode logic but overlooked the RC5 case.

This patch brings the RC5 case in line with the NEC code and makes
the struct self-documenting.

Signed-off-by: David Härdeman <david@hardeman.nu>
Reported-by: David Cimbůrek <david.cimburek@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: Fix regression in some more dib0700 based devices

commit e989a73ebd09d22c22ead51fa363a2f56f70f28a upstream.

Fix an oops during device initialization by correctly setting size_of_priv
instead of leaving it 0.
The regression was introduced by 8abe4a0a3f6d4217b16a ("[media] dib7000:
export just one symbol") and only fixed for one type of dib0700 based
devices in 9e334c75642b6e5bfb95 ("[media] Fix regression in some dib0700
based devices").

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=92301

Fixes: 8abe4a0a3f6d4217b16a ("[media] dib7000: export just one symbol")

Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers

commit 77a3c6fd90c94f635edb00d4a65f485687538791 upstream.

Commit f61bf13b6a07 ("[media] vb2: add allow_zero_bytesused flag to the
vb2_queue struct") added a WARN_ONCE to catch usage of a deprecated API
using a zero value for v4l2_buffer.bytesused.

However, the condition is checked incorrectly, as the v4L2_buffer
bytesused field is supposed to be ignored for multiplanar buffers. This
results in spurious warnings when using the multiplanar API.

Fix it by checking v4l2_buffer.bytesused for uniplanar buffers and
v4l2_plane.bytesused for multiplanar buffers.

Fixes: f61bf13b6a07 ("[media] vb2: add allow_zero_bytesused flag to the vb2_queue struct")

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: at91_adc: allow to use full range of startup time

commit 2ab5f39bc7825808e0fa1e7e5f0b23e174563467 upstream.

The DT-Property "atmel,adc-startup-time" is stored in an u8 for a microsecond
value. When trying to increase the value of STARTUP in Register AT91_ADC_MR
some higher values can't be reached.

Change the type in function parameter and private structure field from u8 to
u32.

Signed-off-by: Jan Leupold <leupold@rsi-elektrotechnik.de>
[nicolas.ferre@atmel.com: change commit message, increase u16 to u32 for startup time]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: rockchip_saradc: add missing MODULE_* data

commit dc7b8d98ac003c9f1e83a5f927c372dac6f114a1 upstream.

The module-data is currently missing. This includes the license-information
which makes the driver taint the kernel and miss symbols when compiled as
module.

Fixes: 44d6f2ef94f9 ("iio: adc: add driver for Rockchip saradc")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: proximity: sx9500: Fix proximity value

commit fd1883f07cb434707e50c4c9a16e3ed4b3a5e74f upstream.

Because of the ABI confusion proximity value exposed by SX9500
was inverted.

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Reviewed-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ABI: Clarify proximity output value

commit bdc10d57f236b534fb675a4bbefd10017aeb2b26 upstream.

Current description for proximity measurement is ambiguous. While
the first part says that proximity is measured by observing
reflectivity, the second part incorrectly infers that reported values
should behave like a distance.

This is because of AS3935 lightning sensor which uses the proximity
API, while not being a true proximity sensor.

Note this is marked for stable as it accompanies a fix in ABI usage
to the sx9500 driver which would otherwise appear to be correct.

Fixes:  614e8842ddf ("iio: ABI: add clarification for proximity")
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: twl4030-madc: Pass the IRQF_ONESHOT flag

commit 6c0d48cb29c29b306ba3548afb45154d22eb4d78 upstream.

Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: tmp006: Check channel info on write

commit 8d05abfaeff52bdf66aba3a3a337dcdbdb4911bf upstream.

only SAMP_FREQ is writable

Will lead to SAMP_FREQ being written by any attempt to write
to the other exported attributes and hence a rather unexpected
result!

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: inv-mpu: Specify the expected format/precision for write channels

commit 6a3c45bb5a385be7049a7725a4fe93eaa76915f4 upstream.

The gyroscope needs IIO_VAL_INT_PLUS_NANO for the scale channel and
unless specified write returns MICRO by default.
This needs to be properly specified so that write operations into scale
have the expected behaviour.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: DAC: ad5624r_spi: fix bit shift of output data value

commit adfa969850ae93beca57f7527f0e4dc10cbe1309 upstream.

The value sent on the SPI bus is shifted by an erroneous number of bits.
The shift value was already computed in the iio_chan_spec structure and
hence subtracting this argument to 16 yields an erroneous data position
in the SPI stream.

Signed-off-by: JM Friedt <jmfriedt@femto-st.fr>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: light: tcs3414: Fix bug preventing to set integration time

commit 33361e5678a541f82f29f85467d589e7bf8da76b upstream.

the millisecond values in tcs3414_times should be checked against
val2, not val, which is always zero.

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Reported-by: Stephan Kleisinger <stephan.kleisinger@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:accel:bmc150-accel: fix counting direction

commit 7a1d0d91c94305fa5802a53df3a54c0ea1963c48 upstream.

In bmc150_accel_unregister_triggers() triggers should be unregistered in
reverse order of registration. Trigger registration starts with number 0,
counting up. In consequence, trigger number needs to be count down here.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Reviewed-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:adc:cc10001_adc: fix Kconfig dependency

commit b2b3c3dc6a7bef886850920f5f5dca041b443aa0 upstream.

The Cosmic Circuits 10001 ADC driver depends on HAS_IOMEM, HAVE_CLK and
REGULATOR together, not just any of these.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:light:cm3323: clear bitmask before set

commit c288503b32e8c5534062a05ec565d28bffa06db3 upstream.

When setting the bits for integration time, the appropriate bitmask needs
to be cleared first.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: use parent adapter quirks in mux

commit dc362d50ba94eaf2b1f11eecd81eb1d040d2d6e6 upstream.

Inherit parent adapter quirks in MUX in case the devices on the multiplexed
buses are interested in the adapter limitations.

Signed-off-by: Łukasz Gemborowski <lukasz.gemborowski@nokia.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: b7f625840267b1 ("i2c: add quirk checks to core")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: mux: pca954x: Use __i2c_transfer because of quirks

commit 0a8237ae319ab5988d40a7a9b33d68846aae34b4 upstream.

pca9541 and pca954x are calling master_xfer() of the parent adapter directly
thus bypassing the quirks checks of the adapter. Use __i2c_transfer() instead.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Tested-by: Łukasz Gemborowski <lukasz.gemborowski@nokia.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: b7f625840267b1 ("i2c: add quirk checks to core")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: mux: Use __i2c_transfer() instead of calling parent's master_xfer()

commit e766f338a74200b8104b1165776b19f56e252834 upstream.

Newly introduced quirks infrastructure doesn't work for the devices behind
MUXes because MUX's master_xfer() calls parent's master_xfer() directly
without checking the quirks. Instead of duplicating check code in MUX just
call __i2c_transfer() instead. This has a side effect on tracing (messages
will appear on both MUX bus and parent bus), but maybe that's not bad at
the end.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Tested-by: Łukasz Gemborowski <lukasz.gemborowski@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: b7f625840267b1 ("i2c: add quirk checks to core")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: at91: fix a race condition when using the DMA controller

commit 93563a6a71bb69dd324fc7354c60fb05f84aae6b upstream.

For TX transactions, the TXCOMP bit in the Status Register is cleared
when the first data is written into the Transmit Holding Register.

In the lines from at91_do_twi_transfer():
at91_twi_write_data_dma(dev);
at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);

the TXCOMP interrupt may be enabled before the DMA controller has
actually started to write into the THR. In such a case, the TXCOMP bit
is still set into the Status Register so the interrupt is triggered
immediately. The driver understands that a transaction completion has
occurred but this transaction hasn't started yet. Hence the TXCOMP
interrupt is no longer enabled by at91_do_twi_transfer() but instead
by at91_twi_write_data_dma_callback().

Also, the TXCOMP bit in the Status Register in not a clear on read flag
but a snapshot of the transmission state at the time the Status
Register is read.
When a NACK error is dectected by the I2C controller, the TXCOMP, NACK
and TXRDY bits are set together to 1 in the SR. If enabled, the TXCOMP
interrupt is triggered at the same time. Also setting the TXRDY to 1
triggers the DMA controller to write the next data into the THR. Such
a write resets the TXCOMP bit to 0 in the SR. So depending on when the
interrupt handler reads the SR, it may fail to detect the NACK error
if it relies on the TXCOMP bit. The NACK bit and its interrupt should
be used instead.

For RX transactions, the TXCOMP bit in the Status Register is cleared
when the START bit is set into the Control Register. However to unify
the management of the TXCOMP bit when the DMA controller is used, the
TXCOMP interrupt is now enabled by the DMA callbacks for both TX and
RX transfers.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: snvs: fix wakealarm by call enable_irq_wake earlier

commit 119434f44c78df8c4b6d67f835448542a4bd7e91 upstream.

When entering suspend while an wakeup alarm is set, enable_set_wake
should make sure that the RTC interrupt keep being enabled and the
.irq_set_wake for the RTC interrupt get called. However, since the
driver uses the suspend_noirq callback, the call to enable_irq_wake
has been made after disabling the interrupts. While .irq_set_wake
has been called properly, the interrupt remained disabled.

Use the suspend callback to call enable_irq_wake early enough to
ensure the RTC interrupt remains enabled.

Fixes: 7654e9d4fd8f ("drivers/rtc/rtc-snvs: fix suspend/resume")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: st21nfcb: remove st21nfcb_nci_i2c_disable

commit 4ac82e894825126816d7b7f662743335ce2b015e upstream.

ndlc_remove already calls st21nfcb_nci_i2c_disable and
phy->powered is already set to 0.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: st21nfcb: Do not remove header once the payload is sent

commit 09f39a950523b1bb830c30a8670b77e0067da092 upstream.

Once the data is sent, we need to preserve the full frame for
the ndlc state machine. If the NDLC ACK is not received in time,
the ndlc layer will resend the same frame.
Having the header byte pulled will corrupt the frame.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: st21nfcb: Remove inappropriate kfree on a devm_kzalloc pointer

commit 38bd83f04c5e9695011dc5c294e0c4e6a9f9052d upstream.

Since ndev->driver_data is allocated by devm_kzalloc(), we do not
need the inappropriate kfree to free it in driver's remove function.
Freeing will trigger when driver unloads.

Acked-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix ocfs2 corrupt when updating journal superblock fails

commit 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a upstream.

If updating journal superblock fails after journal data has been
flushed, the error is omitted and this will mislead the caller as a
normal case.  In ocfs2, the checkpoint will be treated successfully
and the other node can get the lock to update. Since the sb_start is
still pointing to the old log block, it will rewrite the journal data
during journal recovery by the other node. Thus the new updates will
be overwritten and ocfs2 corrupts.  So in above case we have to return
the error, and ocfs2_commit_cache will take care of the error and
prevent the other node to do update first.  And only after recovering
journal it can do the new updates.

The issue discussion mail can be found at:
https://oss.oracle.com/pipermail/ocfs2-devel/2015-June/010856.html
http://comments.gmane.org/gmane.comp.file-systems.ext4/48841

[ Fixed bug in patch which allowed a non-negative error return from
  jbd2_cleanup_journal_tail() to leak out of jbd2_fjournal_flush(); this
  was causing xfstests ext4/306 to fail. -- Ted ]

Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: use GFP_NOFS in jbd2_cleanup_journal_tail()

commit b4f1afcd068f6e533230dfed00782cd8a907f96b upstream.

jbd2_cleanup_journal_tail() can be invoked by jbd2__journal_start()
So allocations should be done with GFP_NOFS

[Full stack trace snipped from 3.10-rh7]
[<ffffffff815c4bd4>] dump_stack+0x19/0x1b
[<ffffffff8105dba1>] warn_slowpath_common+0x61/0x80
[<ffffffff8105dcca>] warn_slowpath_null+0x1a/0x20
[<ffffffff815c2142>] slab_pre_alloc_hook.isra.31.part.32+0x15/0x17
[<ffffffff8119c045>] kmem_cache_alloc+0x55/0x210
[<ffffffff811477f5>] ? mempool_alloc_slab+0x15/0x20
[<ffffffff811477f5>] mempool_alloc_slab+0x15/0x20
[<ffffffff81147939>] mempool_alloc+0x69/0x170
[<ffffffff815cb69e>] ? _raw_spin_unlock_irq+0xe/0x20
[<ffffffff8109160d>] ? finish_task_switch+0x5d/0x150
[<ffffffff811f1a8e>] bio_alloc_bioset+0x1be/0x2e0
[<ffffffff8127ee49>] blkdev_issue_flush+0x99/0x120
[<ffffffffa019a733>] jbd2_cleanup_journal_tail+0x93/0xa0 [jbd2] -->GFP_KERNEL
[<ffffffffa019aca1>] jbd2_log_do_checkpoint+0x221/0x4a0 [jbd2]
[<ffffffffa019afc7>] __jbd2_log_wait_for_space+0xa7/0x1e0 [jbd2]
[<ffffffffa01952d8>] start_this_handle+0x2d8/0x550 [jbd2]
[<ffffffff811b02a9>] ? __memcg_kmem_put_cache+0x29/0x30
[<ffffffff8119c120>] ? kmem_cache_alloc+0x130/0x210
[<ffffffffa019573a>] jbd2__journal_start+0xba/0x190 [jbd2]
[<ffffffff811532ce>] ? lru_cache_add+0xe/0x10
[<ffffffffa01c9549>] ? ext4_da_write_begin+0xf9/0x330 [ext4]
[<ffffffffa01f2c77>] __ext4_journal_start_sb+0x77/0x160 [ext4]
[<ffffffffa01c9549>] ext4_da_write_begin+0xf9/0x330 [ext4]
[<ffffffff811446ec>] generic_file_buffered_write_iter+0x10c/0x270
[<ffffffff81146918>] __generic_file_write_iter+0x178/0x390
[<ffffffff81146c6b>] __generic_file_aio_write+0x8b/0xb0
[<ffffffff81146ced>] generic_file_aio_write+0x5d/0xc0
[<ffffffffa01bf289>] ext4_file_write+0xa9/0x450 [ext4]
[<ffffffff811c31d9>] ? pipe_read+0x379/0x4f0
[<ffffffff811b93f0>] do_sync_write+0x90/0xe0
[<ffffffff811b9b6d>] vfs_write+0xbd/0x1e0
[<ffffffff811ba5b8>] SyS_write+0x58/0xb0
[<ffffffff815d4799>] system_call_fastpath+0x16/0x1b

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>