drm/i915/tgl: Check the UC health of tc controllers after power on

New step added for TGL, required for us to check the TC
microcontroller health after power on TC aux.

BSpec: 49294

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-7-jose.souza@intel.com

drm/i915/icl: Unify disable and enable phy clock gating functions

Adding a enable parameters allow us to share most of the code between
enable and disable functions.

v3:
Renamed icl_phy_clock_gating() to icl_phy_set_clock_gating()

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-6-jose.souza@intel.com

drm/i915/tgl: Add dkl phy registers

These are the registers needed to program Dekel phy. Some register
definitions will be reused from MG PHY definitions, so adding a
comment on those.

Bspec: 49295

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-5-jose.souza@intel.com

drm/i915/tgl/pll: Set update_active_dpll

Commit 24a7bfe0c2d7 ("drm/i915: Keep the TypeC port mode fixed when the
port is active") added this new hook while in parallel TGL upstream was
happening and this was missed.

Without this driver will crash when TC DDI is added and driver is
preparing to do a full modeset.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-4-jose.souza@intel.com

drm/i915/tgl: Finish modular FIA support on registers

If platform supports and has modular FIA is enabled, the registers
bits also change, example: reading TC3 registers with modular FIA
enabled, driver should read from FIA2 but with TC1 bits offsets.

It is described in BSpec 50231 for DFLEXDPSP, other registers don't
have the BSpec description but testing in real hardware have proven
that it had moved for all other registers too.

v2:
- Caching index in tc_phy_fia_idx, instead of calculate it each time

v3:
- Setting tc_phy_fia and tc_phy_fia_idx in the same function

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-3-jose.souza@intel.com

drm/i915/tgl: Add missing ddi clock select during DP init sequence

Step 4.b was complete missed because it is only required to TC and TBT.

Bspec: 49190
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-2-jose.souza@intel.com

drm/i915/execlists: Refactor -EIO markup of hung requests

Pull setting -EIO on the hung requests into its own utility function.
Having allowed ourselves to short-circuit submission of completed
requests, we can now do the mark_eio() prior to submission and avoid
some redundant operations.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-4-chris@chris-wilson.co.uk

drm/i915: Only enqueue already completed requests

If we are asked to submit a completed request, just move it onto the
active-list without modifying it's payload. If we try to emit the
modified payload of a completed request, we risk racing with the
ring->head update during retirement which may advance the head past our
breadcrumb and so we generate a warning for the emission being behind
the RING_HEAD.

v2: Commentary for the sneaky, shared responsibility between functions.
v3: Spelling mistakes and bonus assertion

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-3-chris@chris-wilson.co.uk

drm/i915/execlists: Drop redundant list_del_init(&rq->sched.link)

Since amalgamating the queued and active lists in commit 422d7df4f090
("drm/i915: Replace engine->timeline with a plain list"), performing a
i915_request_submit() will remove the request from the execlists
priority queue.

References: 422d7df4f090 ("drm/i915: Replace engine->timeline with a plain list")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-2-chris@chris-wilson.co.uk

drm/i915/execlists: Relax assertion for a pinned context image on reset

A gpu hang can occur at any time, given a sufficiently angry gpu. An
example is when it forgets to perform a context-switch at the end of a
request, leaving us with a hanging GPU on a completed request. Here, we
may retire the request, only leaving its context alive via the active
barrier. When we reset the GPU on a completed request, we do not modify
its context image (just updating the ring state) and can safely defer
the assertion that we have the image pinned and ready to modify.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111639
Fixes: dffa8feb3084 ("drm/i915/perf: Assert locking for i915_init_oa_perf_state()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-1-chris@chris-wilson.co.uk

drm/i915: pass i915 to intel_modeset_init() and intel_modeset_init_hw()

In general, prefer struct drm_i915_private * over struct drm_device *
when either will do. Rename the local variables to i915. No functional
changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-6-jani.nikula@intel.com

drm/i915: abstract intel_mode_config_init() from intel_modeset_init()

The i915 specific mode config init code is too specific and detailed to
have open in a high level function. Abstract away. No functional
changes.

v2: nest drm_mode_config_init() in the function too (Chris)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-5-jani.nikula@intel.com

drm/i915: abstract intel_panel_sanitize_ssc() from intel_modeset_init()

The code is too specific and detailed to have open in a high level
function. Abstract away. As a drive-by improvement switch to using
enableddisabled() in logging and git rid of a redundant !!. No
functional changes.

v2: drop the !! while at it too (Chris)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-4-jani.nikula@intel.com

drm/i915: pass i915 to intel_modeset_driver_remove()

In general, prefer struct drm_i915_private * over struct drm_device *
when either will do. Rename the local variable to i915. Also propagate
to intel_hpd_poll_fini(). No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-3-jani.nikula@intel.com

drm/i915: pass i915 to i915_driver_modeset_probe()

In general, prefer struct drm_i915_private * over struct drm_device *
when either will do. Rename the local variable to i915. No functional
changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-2-jani.nikula@intel.com

drm/i915: add i915_driver_modeset_remove()

For completeness, add counterpart to i915_driver_modeset_probe() and
remove the asymmetry in the probe/remove parts. No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-1-jani.nikula@intel.com

drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend

When audio power domain is suspended, the display driver must
save state of AUD_FREQ_CNTRL on Tiger Lake and Ice Lake
systems. The initial value of the register is set by BIOS and
is read by driver during the audio component init sequence.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920083918.27057-1-kai.vehmanen@linux.intel.com

drm/i915/dsb: Documentation for DSB.

Added docbook info regarding Display State Buffer(DSB) which
is added from gen12 onwards to batch submit display HW programming.

v1: Initial version as RFC.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-11-animesh.manna@intel.com

drm/i915/dsb: Enable DSB for gen12.

Enabling DSB by setting 1 to has_dsb flag for gen12.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-10-animesh.manna@intel.com

drm/i915/dsb: Enable gamma lut programming using DSB.

Gamma lut programming can be programmed using DSB
where bulk register programming can be done using indexed
register write which takes number of data and the mmio offset
to be written.

Currently enabled for 12-bit gamma LUT which is enabled by
default and later 8-bit/10-bit will be enabled in future
based on need.

v1: Initial version.
v2: Directly call dsb-api at callsites. (Jani)
v3:
- modified the code as per single dsb instance per crtc. (Shashank)
- Added dsb get/put call in platform specific load_lut hook. (Jani)
- removed dsb pointer from dev_priv. (Jani)
v4: simplified code by dropping ref-count implementation. (Shashank)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-9-animesh.manna@intel.com

drm/i915/dsb: function to trigger workload execution of DSB.

Batch buffer will be created through dsb-reg-write function which can have
single/multiple request based on usecase and once the buffer is ready
commit function will trigger the execution of the batch buffer. All
the registers will be updated simultaneously.

v1: Initial version.
v2: Optimized code few places. (Chris)
v3: USed DRM_ERROR for dsb head/tail programming failure. (Shashank)
v4: reset ins_start_offset after commit. (Jani)

Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-8-animesh.manna@intel.com

drm/i915/dsb: functions to enable/disable DSB engine.

DSB will be used for performance improvement for some special scenario.
DSB engine will be enabled based on need and after completion of its work
will be disabled. Api added for enable/disable operation by using DSB_CTRL
register.

v1: Initial version.
v2: POSTING_READ added after writing control register. (Shashank)
v3: cosmetic changes done. (Shashank)

Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-7-animesh.manna@intel.com

drm/i915/dsb: Check DSB engine status.

As per bspec check for DSB status before programming any
of its register. Inline function added to check the dsb status.

Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-6-animesh.manna@intel.com

drm/i915/dsb: Indexed register write function for DSB.

DSB can program large set of data through indexed register write
(opcode 0x9) in one shot. DSB feature can be used for bulk register
programming e.g. gamma lut programming, HDR meta data programming.

v1: initial version.
v2: simplified code by using ALIGN(). (Chris)
v3: ascii table added as code comment. (Shashank)
v4: cosmetic changes done. (Shashank)
v5: reset ins_start_offset. (Jani)
v6: update ins_start_offset in inel_dsb_reg_write.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-5-animesh.manna@intel.com

drm/i915/dsb: single register write function for DSB.

DSB support single register write through opcode 0x1. Generic
api created which accumulate all single register write in a batch
buffer and once DSB is triggered, it will program all the registers
at the same time.

v1: Initial version.
v2: Unused macro removed and cosmetic changes done. (Shashank)
v3: set free_pos to zero in dsb-put() instead dsb-get() and
a cosmetic change. (Shashank)
v4: macro of indexed-write is moved. (Shashank)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-4-animesh.manna@intel.com

drm/i915/dsb: DSB context creation.

This patch adds a function, which will internally get the gem buffer
for DSB engine. The GEM buffer is from global GTT, and is mapped into
CPU domain, contains the data + opcode to be feed to DSB engine.

v1: Initial version.

v2:
- removed some unwanted code. (Chris)
- Used i915_gem_object_create_internal instead of _shmem. (Chris)
- cmd_buf_tail removed and can be derived through vma object. (Chris)

v3: vma realeased if i915_gem_object_pin_map() failed. (Shashank)

v4: for simplification and based on current usage added single dsb
object in intel_crtc. (Shashank)

v5: seting NULL to cmd_buf moved outside of mutex in dsb-put(). (Shashank)

v6:
- refcount machanism added.
- Used atomic_add_return and atomic_dec_and_test instead of
atomic_inc and atomic_dec. (Jani)

Cc: Imre Deak <imre.deak@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
[Jani: added #include <linux/types.h> while pushing]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-3-animesh.manna@intel.com

drm/i915/dsb: feature flag added for display state buffer.

Display State Buffer(DSB) is a new hardware capability, introduced
in GEN12 display. DSB allows a driver to batch-program display HW
registers.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-2-animesh.manna@intel.com

drm/i915/color: Extract icl_read_luts()

For icl+, have hw read out to create hw blob of gamma
lut values. icl+ platforms supports multi segmented gamma
mode by default, add hw lut creation for this mode.

This will be used to validate gamma programming using dsb
(display state buffer) which is a tgl specific feature.

Major change done-removal of readouts of coarse and fine segments
because PAL_PREC_DATA register isn't giving propoer values.
State checker limited only to "fine segment"

v2: -readout code for multisegmented gamma has to come
     up with some intermediate entries that aren't preserved
     in hardware (Jani N)
    -linear interpolation (Ville)
    -moved common code to check gamma_enable to specific funcs,
     since icl doesn't support that
v3: -use u16 instead of __u16 [Jani N]
    -used single lut [Jani N]
    -improved and more readable for loops [Jani N]
    -read values directly to actual locations and then fill gaps [Jani N]
    -moved cleaning to patch 1 [Jani N]
    -renamed icl_read_lut_multi_seg() to icl_read_lut_multi_segment to
     make it similar to icl_load_luts()
    -renamed icl_compute_interpolated_gamma_blob() to
     icl_compute_interpolated_gamma_lut_values() more sensible, I guess
v4: -removed interpolated func for creating gamma lut values
    -removed readouts of fine and coarse segments, failure to read PAL_PREC_DATA
     correctly

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1569096654-24433-3-git-send-email-swati2.sharma@intel.com

drm/i915/color: Fix formatting issues

Fixed few formatting issues in multi-segmented load_lut().

v3: -style nitting [Jani]
    -balanced parentheses moved from patch 2 to 1 [Jani]
    -subject prefix change [Jani]
    -added commit message [Jani]
v4: -rearranged INDEX register write in ilk_read_luts()

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1569096654-24433-2-git-send-email-swati2.sharma@intel.com

drm/i915/tgl: s/ss/eu fuse reading support

Gen12 has dual-subslices (DSS), which compared to gen11 subslices have
some duplicated resources/paths. Although DSS behave similarly to 2
subslices, instead of splitting this and presenting userspace with bits
not directly representative of hardware resources, present userspace
with a subslice_mask made up of DSS bits instead.

v2: GEM_BUG_ON on mask size (Lionel)

Bspec: 29547
Bspec: 12247
Cc: Kelvin Gardiner <kelvin.gardiner@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
CC: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com> #v1
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913075137.18476-2-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Add PIPECONF YCbCr 4:4:4 programming for ILK-IVB

On ILK-IVB the pipe colorspace is configured via PIPECONF
(as opposed to PIPEMISC in BDW+). Let's configure+readout
that stuff correctly.

Enabling YCbCr 4:4:4 output will now be a simple matter of
setting crtc_state->output_format appropriately in the encoder
.compute_config(). However, when we do that we must be
aware of the fact that YCbCr DP output doesn't seem to work
on ILK (resulting image is totally garbled), but on SNB+
it works fine. However HDMI YCbCr output does work correctly
even on ILK.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-13-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Set up ILK/SNB csc unit properly for YCbCr output

Prepare the pipe csc for YCbCr output on ilk/snb. The main difference
to IVB+ is the lack of explicit post offsets, and instead we must
configure the CSC info RGB->YUV mode (which takes care of offsetting
Cb/Cr properly) and enable the "black screen offset" bit to add the
required offset to Y.

And while at it throw some comments around the bit defines to
document which platforms have which bits.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-12-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Document ILK+ pipe csc matrix better

Add comments to explain the ilk pipe csc operation a bit better.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-11-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Add PIPECONF YCbCr 4:4:4 programming for HSW

On HSW the pipe colorspace is configured via PIPECONF
(as opposed to PIPEMISC in BDW+). Let's configure+readout
that stuff correctly.

Enabling YCbCr 4:4:4 output will now be a simple matter of
setting crtc_state->output_format appropriately in the encoder
.compute_config().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-10-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Simplify intel_get_crtc_ycbcr_config()

Make intel_get_crtc_ycbcr_config() simpler and rename it
to bdw_get_pipemisc_output_format() to better reflect what
it does.

Also toss in some comments to document that the 4:2:0 PIPECONF
bits are glk+ only. They are mbz on earlier platforms so reading
them unconditionally is safe however.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-9-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Don't look at unrelated PIPECONF bits for interlaced readout

Since HSW the PIPECONF progressive vs. interlaced selection is done
with just two bits instead of the earlier three. Let's not look at the
extra bit on HSW+. Also gen2 doesn't support interlaced displays at all.

This is actually fine as is currently because the extra bit is mbz (as
are all three bits on gen2). But just to avoid mishaps in the future
if the bits get reused let's only look at what's properly defined.

v2: constify crtc_state

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-8-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Never set limited_color_range=true for YCbCr output

crtc_state->limited_color_range only applies to RGB output but
we're currently setting it even for YCbCr output. That will
lead to conflicting MSA and PIPECONF settings which can mess
up the image. Let's make sure limited_color_range stays unset
with YCbCr output.

Also WARN if we end up with such a bogus combination when
programming the MSA MISC bits as it's impossible to even
indicate quantization rangle for YCbCr via MSA MISC. YCbCr
output is simply assumed to be limited range always. Note
that VSC SDP does provide a mechanism for full range YCbCr,
so in the future we may want to rethink how we compute/store
this state.

And for good measure we add the same WARN to the HDMI path.

v2: s/==/!=/ in the HDMI WARN

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718164523.11738-1-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Extract intel_hdmi_limited_color_range()

Pull the code for computing the limited color range
setting into a small helper. We'll add a bit more to it
later.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-5-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Fix AVI infoframe quantization range for YCbCr output

We're configuring the AVI infoframe quantization range bits as if
we're always transmitting RGB pixels. Let's fix this so that we
correctly indicate limited range YCC quantization range when
transmitting YCbCr instead.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-4-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Fix HSW+ DP MSA YCbCr colorspace indication

Looks like we're currently setting the MSA to xvYCC BT.709 instead
of the YCbCr BT.601 claimed by the comment. But even that comment
is wrong since we configure the CSC matrix to BT.709.

Let's remove the bogus statement from the comment and fix the
MSA to indicate YCbCr BT.709 so that it matches the actual
pixel data we're transmitting.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-3-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915/uc: Update HuC firmware naming convention and load latest HuC

Make both GuC and HuC to use "." as the separator. Hardcode
the separator in MAKE_UC_FW_PATH. Remove the usage of "ver" from HuC.

The current convention being:
<platform>_<g/h>uc_<major>.<minor>.patch.bin

Update the versions of HuC being loaded of the platforms.

SKL - v2.0.0
BXT - v2.0.0
KBL - v4.0.0
GLK - v4.0.0
CFL - KBL v4.0.0
ICL - v9.0.0
CML - v4.0.0

v2: Remove the separator parameter altogether from
__MAKE_UC_FW_PATH.(Daniele)
- Squash all firmware update patches (Daniele)
v3: s/huc/HuC
- Correct the order of platforms
- Change REVID of cml to 5(Michal)
- Code space changes in huc_def (Daniele)

Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919201204.9691-1-daniele.ceraolospurio@intel.com

Revert "drm/i915/tgl: Implement Wa_1406941453"

Our sanitychecks indicate that while this register is context
saved/restore, the HW does not preserve this bit within the register --
it likely doesn't exist, or one of those mythical bits that the
architects insist does something despite all appearances to the
contrary.

For reference, SAMPLER_MODE is already in i915_reg.h as
GEN10_SAMPLER_MODE and is being setup in icl_ctx_workarounds_init() as
opposed to the chosen location here of rcs_engine_wa_init).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111754
Fixes: 7f0cc34b5349 ("drm/i915/tgl: Implement Wa_1406941453")
Testcase: igt/i915_selftest/live_workarounds
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920081254.18389-1-chris@chris-wilson.co.uk

drm/i915: Protect timeline->hwsp dereferencing

As not only is the signal->timeline volatile, so will be acquiring the
timeline's HWSP. We must first carefully acquire the timeline from the
signaling request and then lock the timeline. With the removal of the
struct_mutex serialisation of request construction, we can have multiple
timelines active at once, and so we must avoid using the nested mutex
lock as it is quite possible for both timelines to be establishing
semaphores on the other and so deadlock.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-3-chris@chris-wilson.co.uk

drm/i915: Lock signaler timeline while navigating

As we need to take a walk back along the signaler timeline to find the
fence before upon which we want to wait, we need to lock that timeline
to prevent it being modified as we walk. Similarly, we also need to
acquire a reference to the earlier fence while it still exists!

Though we lack the correct locking today, we are saved by the
overarching struct_mutex -- but that protection is being removed.

v2: Tvrtko made me realise I was being lax and using annotations to
ignore the AB-BA deadlock from the timeline overlap. As it would be
possible to construct a second request that was using a semaphore from the
same timeline as ourselves, we could quite easily end up in a situation
where we deadlocked in our mutex waits. Avoid that by using a trylock
and falling back to a normal dma-fence await if contended.

v3: Eek, the signal->timeline is volatile and must be carefully
dereferenced to ensure it is valid.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-2-chris@chris-wilson.co.uk

drm/i915: Mark i915_request.timeline as a volatile, rcu pointer

The request->timeline is only valid until the request is retired (i.e.
before it is completed). Upon retiring the request, the context may be
unpinned and freed, and along with it the timeline may be freed. We
therefore need to be very careful when chasing rq->timeline that the
pointer does not disappear beneath us. The vast majority of users are in
a protected context, either during request construction or retirement,
where the timeline->mutex is held and the timeline cannot disappear. It
is those few off the beaten path (where we access a second timeline) that
need extra scrutiny -- to be added in the next patch after first adding
the warnings about dangerous access.

One complication, where we cannot use the timeline->mutex itself, is
during request submission onto hardware (under spinlocks). Here, we want
to check on the timeline to finalize the breadcrumb, and so we need to
impose a second rule to ensure that the request->timeline is indeed
valid. As we are submitting the request, it's context and timeline must
be pinned, as it will be used by the hardware. Since it is pinned, we
know the request->timeline must still be valid, and we cannot submit the
idle barrier until after we release the engine->active.lock, ergo while
submitting and holding that spinlock, a second thread cannot release the
timeline.

v2: Don't be lazy inside selftests; hold the timeline->mutex for as long
as we need it, and tidy up acquiring the timeline with a bit of
refactoring (i915_active_add_request)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-1-chris@chris-wilson.co.uk

drm/i915/tgl: Suspend pre-parser across GTT invalidations

Before we execute a batch, we must first issue any and all TLB
invalidations so that batch picks up the new page table entries.
Tigerlake's preparser is weakening our post-sync CS_STALL inside the
invalidate pipe-control and allowing the loading of the batch buffer
before we have setup its page table (and so it loads the wrong page and
executes indefinitely).

The igt_cs_tlb indicates that this issue can only be observed on rcs,
even though the preparser is common to all engines. Alternatively, we
could do TLB shootdown via mmio on updating the GTT.

By inserting the pre-parser disable inside EMIT_INVALIDATE, we will also
accidentally fixup execution that writes into subsequent batches, such
as gem_exec_whisper and even relocations performed on the GPU. We should
be careful not to allow this disable to become baked into the uABI! The
issue is that if userspace relies on our disabling of the HW
optimisation, when we are ready to enable that optimisation, userspace
will then be broken...

Testcase: igt/i915_selftests/live_gtt/igt_cs_tlb
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111753
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919151811.9526-1-chris@chris-wilson.co.uk

drm/i915: Don't advertise modes that exceed the max plane size

Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
planes' max resolution. This has the nasty implication that modes on the
connectors' mode list may not be usable when the user asks for a
fullscreen plane. Seeing as that is the most common use case it seems
prudent to filter out modes that don't allow for fullscreen planes to
be enabled.

Let's do that in the connetor .mode_valid() hook so that normally
such modes are kept hidden but the user is still able to forcibly
specify such a mode if they know they don't need fullscreen planes.

This is in line with ealier policies regarding certain clock limits.
The idea is to prevent the casual user from encountering a mode that
would fail under typical conditions, but allow the expert user to
force things if they so wish.

Maybe in the future we should consider automagically using two
planes when one can't cover the entire screen? Wouldn't be a
great match for the current uapi with explicit planes though,
but I guess no worse than using two pipes (which we apparently
have to in the future anyway). Either that or we'd have to
teach userspace to do it for us.

v2: Fix icl+ max plane heigth (Manasi)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Leho Kraav <leho@kraav.com>
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918150707.32420-1-ville.syrjala@linux.intel.com

drm/i915: Bump skl+ max plane width to 5k for linear/x-tiled

The officially validated plane width limit is 4k on skl+, however
we already had people using 5k displays before we started to enforce
the limit. Also it seems Windows allows 5k resolutions as well
(though not sure if they do it with one plane or two).

According to hw folks 5k should work with the possible
exception of the following features:
- Ytile (already limited to 4k)
- FP16 (already limited to 4k)
- render compression (already limited to 4k)
- KVMR sprite and cursor (don't care)
- horizontal panning (need to verify this)
- pipe and plane scaling (need to verify this)

So apart from last two items on that list we are already
fine. We should really verify what happens with those last
two items but I don't have a 5k display on hand atm so it'll
have to wait.

In the meantime let's just bump the limit back up to 5k since
several users have already been using it without apparent issues.
At least we'll be no worse off than we were prior to lowering
the limits.

Cc: stable@vger.kernel.org
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Leho Kraav <leho@kraav.com>
Fixes: 372b9ffb5799 ("drm/i915: Fix skl+ max plane width")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111501
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905135044.2001-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>

drm/i915/tgl: Implement Wa_1406941453

Enable Small PL for power benefit.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-18-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190726000226.26914-4-lucas.demarchi@intel.com

drm/i915/tgl: Implement Wa_1409142259

Disable CPS aware color pipe by setting chicken bit.

BSpec: 52890
HSDES: 1409142259

v2: Move WA to ctx WA's(Daniele)

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909231445.23815-1-radhakrishna.sripada@intel.com
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>

drm/i915: Unify ICP and MCC hotplug pin tables

The MCC hpd table is just a subset of the ICP table; we can eliminate it
and use the ICP table everywhere.  The extra pins in the table won't be
a problem for MCC since we still supply an appropriate hotplug trigger
mask anywhere the pin table is used.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918235626.3750-2-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Future-proof DDC pin mapping

We generally assume future platforms will inherit the behavior of the
most recent platforms, so update our DDC pin mapping defaults to match
how ICP/TGP behave (i.e., pins starting from GMBUS_PIN_1_BXT for combo
PHY's and pins starting from GMBUS_PIN_9_TC1_ICP for TC PHY's).  MCC's
non-standard handling of combo PHY C seems like a platform-specific
quirk that is unlikely to be duplicated on future platforms, so continue
handling it as a special case.

Without this change, future platforms would default to gen4-style pin
mapping which is almost certainly not what we'll want.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918235626.3750-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/selftests: Exercise CS TLB invalidation

Check that we are correctly invalidating the TLB at the start of a
batch after updating the GTT.

v2: Comments and hold the request reference while spinning

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919131414.7495-1-chris@chris-wilson.co.uk

drm/i915: Verify the engine after acquiring the active.lock

When using virtual engines, the rq->engine is not stable until we hold
the engine->active.lock (as the virtual engine may be exchanged with the
sibling). Since commit 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
we may retire a request concurrently with resubmitting it to HW, we need
to be extra careful to verify we are holding the correct lock for the
request's active list. This is similar to the issue we saw with
rescheduling the virtual requests, see sched_lock_engine().

Or else:

<4> [876.736126] list_add corruption. prev->next should be next (ffff8883f931a1f8), but was dead000000000100. (prev=ffff888361ffa610).
<4> [876.736136] WARNING: CPU: 2 PID: 21 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70
<4> [876.736137] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_intel_nhlt snd_hda_codec snd_hwdep snd_hda_core ghash_clmulni_intel e1000e cdc_ether usbnet mii snd_pcm ptp pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915]
<4> [876.736154] CPU: 2 PID: 21 Comm: ksoftirqd/2 Tainted: G     U            5.3.0-CI-CI_DRM_6898+ #1
<4> [876.736156] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019
<4> [876.736157] RIP: 0010:__list_add_valid+0x4d/0x70
<4> [876.736159] Code: c3 48 89 d1 48 c7 c7 20 33 0e 82 48 89 c2 e8 4a 4a bc ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 70 33 0e 82 e8 33 4a bc ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 c0 33 0e 82 e8
<4> [876.736160] RSP: 0018:ffffc9000018bd30 EFLAGS: 00010082
<4> [876.736162] RAX: 0000000000000000 RBX: ffff888361ffc840 RCX: 0000000000000104
<4> [876.736163] RDX: 0000000080000104 RSI: 0000000000000000 RDI: 00000000ffffffff
<4> [876.736164] RBP: ffffc9000018bd68 R08: 0000000000000000 R09: 0000000000000001
<4> [876.736165] R10: 00000000aed95de3 R11: 000000007fe927eb R12: ffff888361ffca10
<4> [876.736166] R13: ffff888361ffa610 R14: ffff888361ffc880 R15: ffff8883f931a1f8
<4> [876.736168] FS:  0000000000000000(0000) GS:ffff88849fd00000(0000) knlGS:0000000000000000
<4> [876.736169] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [876.736170] CR2: 00007f093a9173c0 CR3: 00000003bba08005 CR4: 0000000000760ee0
<4> [876.736171] PKRU: 55555554
<4> [876.736172] Call Trace:
<4> [876.736226]  __i915_request_submit+0x152/0x370 [i915]
<4> [876.736263]  __execlists_submission_tasklet+0x6da/0x1f50 [i915]
<4> [876.736293]  ? execlists_submission_tasklet+0x29/0x50 [i915]
<4> [876.736321]  execlists_submission_tasklet+0x34/0x50 [i915]
<4> [876.736325]  tasklet_action_common.isra.5+0x47/0xb0
<4> [876.736328]  __do_softirq+0xd8/0x4ae
<4> [876.736332]  ? smpboot_thread_fn+0x23/0x280
<4> [876.736334]  ? smpboot_thread_fn+0x6b/0x280
<4> [876.736336]  run_ksoftirqd+0x2b/0x50
<4> [876.736338]  smpboot_thread_fn+0x1d3/0x280
<4> [876.736341]  ? sort_range+0x20/0x20
<4> [876.736343]  kthread+0x119/0x130
<4> [876.736345]  ? kthread_park+0xa0/0xa0
<4> [876.736347]  ret_from_fork+0x24/0x50
<4> [876.736353] irq event stamp: 2290145
<4> [876.736356] hardirqs last  enabled at (2290144): [<ffffffff8123cde8>] __slab_free+0x3e8/0x500
<4> [876.736358] hardirqs last disabled at (2290145): [<ffffffff819cfb4d>] _raw_spin_lock_irqsave+0xd/0x50
<4> [876.736360] softirqs last  enabled at (2290114): [<ffffffff81c0033e>] __do_softirq+0x33e/0x4ae
<4> [876.736361] softirqs last disabled at (2290119): [<ffffffff810b815b>] run_ksoftirqd+0x2b/0x50
<4> [876.736363] WARNING: CPU: 2 PID: 21 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70
<4> [876.736364] ---[ end trace 3e58d6c7356c65bf ]---
<4> [876.736406] ------------[ cut here ]------------
<4> [876.736415] list_del corruption. prev->next should be ffff888361ffca10, but was ffff88840ac2c730
<4> [876.736421] WARNING: CPU: 2 PID: 5490 at lib/list_debug.c:53 __list_del_entry_valid+0x79/0x90
<4> [876.736422] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_intel_nhlt snd_hda_codec snd_hwdep snd_hda_core ghash_clmulni_intel e1000e cdc_ether usbnet mii snd_pcm ptp pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915]
<4> [876.736433] CPU: 2 PID: 5490 Comm: i915_selftest Tainted: G     U  W         5.3.0-CI-CI_DRM_6898+ #1
<4> [876.736435] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019
<4> [876.736436] RIP: 0010:__list_del_entry_valid+0x79/0x90
<4> [876.736438] Code: 0b 31 c0 c3 48 89 fe 48 c7 c7 30 34 0e 82 e8 ae 49 bc ff 0f 0b 31 c0 c3 48 89 f2 48 89 fe 48 c7 c7 68 34 0e 82 e8 97 49 bc ff <0f> 0b 31 c0 c3 48 c7 c7 a8 34 0e 82 e8 86 49 bc ff 0f 0b 31 c0 c3
<4> [876.736439] RSP: 0018:ffffc900003ef758 EFLAGS: 00010086
<4> [876.736440] RAX: 0000000000000000 RBX: ffff888361ffc840 RCX: 0000000000000002
<4> [876.736442] RDX: 0000000080000002 RSI: 0000000000000000 RDI: 00000000ffffffff
<4> [876.736443] RBP: ffffc900003ef780 R08: 0000000000000000 R09: 0000000000000001
<4> [876.736444] R10: 000000001418e4b7 R11: 000000007f0ea93b R12: ffff888361ffcab8
<4> [876.736445] R13: ffff88843b6d0000 R14: 000000000000217c R15: 0000000000000001
<4> [876.736447] FS:  00007f4e6f255240(0000) GS:ffff88849fd00000(0000) knlGS:0000000000000000
<4> [876.736448] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [876.736449] CR2: 00007f093a9173c0 CR3: 00000003bba08005 CR4: 0000000000760ee0
<4> [876.736450] PKRU: 55555554
<4> [876.736451] Call Trace:
<4> [876.736488]  i915_request_retire+0x224/0x8e0 [i915]
<4> [876.736521]  i915_request_create+0x4b/0x1b0 [i915]
<4> [876.736550]  nop_virtual_engine+0x230/0x4d0 [i915]

Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111695
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918145453.8800-1-chris@chris-wilson.co.uk

drm/i915: fix SFC reset flow

Our assumption that the we can ask the HW to lock the SFC even if not
currently in use does not match the HW commitment. The expectation from
the HW is that SW will not try to lock the SFC if the engine is not
using it and if we do that the behavior is undefined; on ICL the HW
ends up to returning the ack and ignoring our lock request, but this is
not guaranteed and we shouldn't expect it going forward.

Also, failing to get the ack while the SFC is in use means that we can't
cleanly reset it, so fail the engine reset in that scenario.

v2: drop rmw change, keep the log as debug and handle failure (Chris),
    improve comments (Tvrtko).

Reported-by: Owen Zhang <owen.zhang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919015330.15435-1-daniele.ceraolospurio@intel.com

drm/i915: Extend Haswell GT1 PSMI workaround to all

A few times in CI, we have detected a GPU hang on our Haswell GT2
systems with the characteristic IPEHR of 0x780c0000. When the PSMI w/a
was first introducted, it was applied to all Haswell, but later on we
found an erratum that supposedly restricted the issue to GT1 and so
constrained it only be applied on GT1. That may have been a mistake...

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111692
Fixes: 167bc759e823 ("drm/i915: Restrict PSMI context load w/a to Haswell GT1")
References: 2c550183476d ("drm/i915: Disable PSMI sleep messages on all rings around context switches")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917194746.26710-1-chris@chris-wilson.co.uk

drm/i915/cml: Add second PCH ID for CMP

The CMP PCH ID we have in the driver is correct for the CML-U machines we have
in our CI system, but the CML-S and CML-H CI machines appear to use a
different PCH ID, leading our driver to detect no PCH for them.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
References: 729ae330a0f2e2 ("drm/i915/cml: Introduce Comet Lake PCH")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111461
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190916233251.387-1-matthew.d.roper@intel.com

drm/i915/tgl: Extend MI_SEMAPHORE_WAIT

On Tigerlake, MI_SEMAPHORE_WAIT grew an extra dword, so be sure to
update the length field and emit that extra parameter and any padding
noop as required.

v2: Define the token shift while we are adding the updated MI_SEMAPHORE_WAIT
v3: Use int instead of bool in the addition so that readers are not left
wondering about the intricacies of the C spec. Now they just have to
worry what the integer value of a boolean operation is...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917123055.28965-1-chris@chris-wilson.co.uk

drm/i915: Only apply a rmw mmio update if the value changes

If we try to clear, or even set, a bit in the register that doesn't
change the register state; skip the write. There's a slight danger in
that the register acts as a latch-on-write, but I do not think we use a
rmw cycle with any such latch registers.

Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917080029.27632-1-chris@chris-wilson.co.uk

drm/i915: Show the logical context ring state on dumping

Include the active context register state when dumping the engine.

Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190915203701.29163-1-chris@chris-wilson.co.uk

drm/i915: stop conflating HAS_DISPLAY() and disabled display

Stop setting ->pipe_mask to zero when display is disabled, allowing us
to have different code paths for not actually having display hardware,
and having display hardware disabled. This lets us develop those two
avenues independently.

There are no functional changes for when there is no display. However,
all uses of for_each_pipe() and for_each_pipe_masked() will start
running for the disabled display case. Put one of the more significant
ones behind checks for INTEL_DISPLAY_ENABLED(), otherwise the cases
should not be hit with disabled display, or they seem benign. Fingers
crossed.

All in all, this might not be the ideal solution. In fact we may have
had something along the lines of this in the past, but we ended up
conflating the two cases. Possibly even by recommendation by yours
truly; I did not dare dig up that part of the history. But the perfect
is the enemy of the good, this is a straightforward change, and lets us
get actual work done in both fronts without interfering with each other.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190916092901.31440-1-jani.nikula@intel.com

drm/i915: s/pipe_config/crtc_state/ in intel_crtc_atomic_check()

Clean up the mess with the drm vs. intel types in
intel_crtc_atomic_check() and rename varibles accordingly.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-5-ville.syrjala@linux.intel.com

drm/i915: Extract intel_modeset_calc_cdclk()

Exfiltrate the cdclk code from intel_modeset_checks() into
intel_modeset_calc_cdclk().

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-4-ville.syrjala@linux.intel.com

drm/i915: Allow downscale factor of <3.0 on glk+ for all formats

Bspec says that glk+ max downscale factor is <3.0 for all pixel formats.
Older platforms had a max of <2.0 for NV12. Update the code to deal with
this.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-3-ville.syrjala@linux.intel.com

drm/i915: Replace is_planar_yuv_format() with drm_format_info_is_yuv_semiplanar()

There's a helper in drm_fourcc.h these days to check of we're dealing
with a two plane YUV format. Make use if it.

Also s/plane/color_plane/ in skl_plane_relative_data_rate() to reduce
the confusion.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-2-ville.syrjala@linux.intel.com

drm/i915: introduce INTEL_DISPLAY_ENABLED()

Prepare for making a distinction between not having display and having
disabled display. Add INTEL_DISPLAY_ENABLED() and use it where
HAS_DISPLAY() is used after intel_device_info_runtime_init(). This is
initially duplication, as disabling display still leads to ->pipe_mask =
0 and HAS_DISPLAY() being false.

Note that ever since i915.display_disable was introduced, it has not
affected PCH detection even if it uses HAS_DISPLAY(), as display disable
happens after that.

Since INTEL_DISPLAY_ENABLED() will not make sense unless HAS_DISPLAY()
is true, include a warning for catching misuses making decisions on
INTEL_DISPLAY_ENABLED() when HAS_DISPLAY() is false.

v2: Remove INTEL_DISPLAY_ENABLED() check from intel_detect_pch() (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913100407.30991-1-jani.nikula@intel.com

drm/i915/tgl: Re-enable rc6

We think that we got rc6 problems sorted out. Flip the switch
and let CI expose our tendency to naive optimism.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913200638.31939-1-chris@chris-wilson.co.uk

drm/i915/tgl: Introduce gen12 forcewake ranges

The media ranges extend beyond what gen11 gives so we can't piggypack
on gen11 ranges, even on read side.

Introduce a table for gen12 and accessors for it.

v2: correctly implement gen12_fwtable_write/read (Daniele)
v3: update with ranges from bspec.
v4: avoid GEN11_NEEDS_FORCEWAKE (Mika)
v5: bspec ref (Daniele)

BSpec: 52078
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913141652.27958-2-mika.kuoppala@linux.intel.com

drm/i915: Update Gen11 forcewake ranges

Daniele noticed new render ranges in Gen11 fw table.

Bspec: 18331
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913141652.27958-1-mika.kuoppala@linux.intel.com

drm/i915/tgl: Limit ourselves to just rcs0

More pruning away of features until we have a stable system and a basis
for debugging what's missing.

v2: Fixup vdbox/vebox fusing

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913145556.23912-1-chris@chris-wilson.co.uk

drm/i915: Don't mix srcu tag and negative error codes

While srcu may use an integer tag, it does not exclude potential error
codes and so may overlap with our own use of -EINTR. Use a separate
outparam to store the tag, and report the error code separately.

Fixes: 2caffbf11762 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912160834.30601-1-chris@chris-wilson.co.uk

drm/i915/display/icl: Bump up the plane/fb height

On ICL+, the max supported plane height is 4320, so bump it up
To support 4320, we need to increase the number of bits used to
read plane_height to 13 as opposed to older 12 bits.

v4:
* Adjust the width mask also since extra bits are mbz (Ville)
v3:
* Use 0xffff for mask as extra bits are mbz (Ville)
v2:
* ICL plane height supported is 4320 (Ville)
* Add a new line between max width and max height (Jose)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712203808.4126-1-manasi.d.navare@intel.com

drm/i915/display/icl: Bump up the hdisplay and vdisplay as per transcoder limits

On ICL+, the vertical limits for the transcoders are increased to 8192
and horizontal limits are bumped to 16K so bump up
limits in intel_mode_valid()

v4:
* Increase the hdisplay to 16K (Ville)
v3:
* Supported starting ICL (Ville)
* Use the higher limits from TRANS_VTOTAL register (Ville)
v2:
* Checkpatch warning (Manasi)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712202214.3906-1-manasi.d.navare@intel.com

drm/i915/gtt: Make sure the gen6 ppgtt is bound before first use

As we remove the struct_mutex protection from around the vma pinning,
counters need to be atomic and aware that there may be multiple threads
simultaneously active.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913064200.24297-1-chris@chris-wilson.co.uk

drm/i915/selftests: Keep the engine awake while we keep for preemption

Keep the engine awake to ensure that we don't inject any pm-idle
requests.

References: https://bugs.freedesktop.org/show_bug.cgi?id=111108
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912122639.25224-1-chris@chris-wilson.co.uk

drm/i915: Get the correct wakeref for reading HOTPLUG_EN et al.

Without it we get:
 Unclaimed read from register 0x1e1110
 WARNING: CPU: 2 PID: 1029 at drivers/gpu/drm/i915/intel_uncore.c:1101 __unclaimed_reg_debug+0x40/0x50 [i915]
 Call Trace:
  fwtable_read32+0x233/0x300 [i915]
  i915_interrupt_info+0xa73/0xd60 [i915]
  seq_read+0xdb/0x3c0
  full_proxy_read+0x51/0x80
  vfs_read+0x9e/0x160
  ksys_read+0x8f/0xe0
  do_syscall_64+0x55/0x1c0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109824
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912125418.23115-2-arkadiusz.hiler@intel.com

drm/i915/tgl: Disable preemption while being debugged

We see failures where the context continues executing past a
preemption event, eventually leading to situations where a request has
executed before we have event submitted it to HW! It seems like tgl is
ignoring our RING_TAIL updates, but more likely is that there is a
missing update required for our semaphore waits around preemption.

v2: And disable internal semaphore usage

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912132313.12751-1-chris@chris-wilson.co.uk

drm/i915/pmu: Use GT parked for estimating RC6 while asleep

As we track when we put the GT device to sleep upon idling, we can use
that callback to sample the current rc6 counters and record the
timestamp for estimating samples after that point while asleep.

v2: Stick to using ktime_t
v3: Track user_wakerefs that interfere with the new
intel_gt_pm_wait_for_idle
v4: No need for parked/unparked estimation if !CONFIG_PM
v5: Keep timer park/unpark logic as was
v6: Refactor duplicated estimate/update rc6 logic
v7: Pull intel_get_pm_get_if_awake() out from the pmu->lock.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912124813.19225-1-chris@chris-wilson.co.uk

drm/i915: convert device info num_pipes to pipe_mask

Replace device info number of pipes with a bit mask of available
pipes. This will prove handy in the future. There's still a bunch of
future work to do to actually allow a non-consecutive mask of pipes, but
it's a start. No functional changes.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911202908.19631-1-jani.nikula@intel.com

drm/i915/pmu: Skip busyness sampling when and where not needed

Since d0aa694b9239 ("drm/i915/pmu: Always sample an active ringbuffer")
the cost of sampling the engine state on execlists platforms became a
little bit higher when both engine busyness and one of the wait states are
being monitored. (Previously the busyness sampling on legacy platforms was
done via seqno comparison so there was no cost of mmio read.)

We can avoid that by skipping busyness sampling when engine supports
software busy stats and so avoid the cost of potential mmio read and
sample accumulation.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911160730.22687-1-tvrtko.ursulin@linux.intel.com

drm/i915/execlists: Ensure the context is reloaded after a GPU reset

After we manipulate the context to allow replay after a GPU reset, force
that context to be reloaded. This should be a layer of paranoia, for if
the GPU was reset, the context will no longer be resident!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912092933.4729-2-chris@chris-wilson.co.uk

drm/i915/execlists: Add a paranoid flush of the CSB pointers upon reset

After a GPU reset, we need to drain all the CS events so that we have an
accurate picture of the execlists state at the time of the reset. Be
paranoid and force a read of the CSB write pointer from memory.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912092933.4729-1-chris@chris-wilson.co.uk

drm/i915: Disable FBC if BIOS reserved memory (stolen) is unavailable

The FBC requires a couple of contiguous buffers, which we allocate from
stolen memory. If stolen memory is unavailable, we cannot allocate those
buffers and so cannot support FBC. Mark it so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911175926.31365-1-chris@chris-wilson.co.uk

drm/i915: Remove duplicated bxt/cnl/icl .modeset_calc_cdclk() funcs

Reuse the same .modeset_calc_cdclk() function for all bxt+.

The only difference in between the cnl/icl and the bxt variants
is the call to cnl_compute_min_voltage_level(). We can do that call
just fine on older platforms since they leave min_voltage_level[]
zeroed. Let's rename the function to bxt_compute_min_voltage_level()
just so it stays consistent with the rest of the naming scheme.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-4-ville.syrjala@linux.intel.com

drm/i915: Reuse cnl_modeset_calc_cdclk() on icl+

The cnl and icl .modeset_calc_cdclk() functions are identical. Drop one
copy.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-3-ville.syrjala@linux.intel.com

drm/i915: Fix CD2X pipe select masking during cdclk sanitation

We're forgetting to mask off all three pipe select bits from the
CDCLK_CTL value on icl+ which may lead to the extra bit being
left in. That will cause us to consider the current hardware
cdclk state as invalid, and we proceed to sanitize it even
though the hardware may have active pipes and whatnot.

Fix up the mask so we get rid of all three pipe select bits
and thus hopefully no longer sanitize cdclk when it's already
correctly programmed.

Cc: Matt Roper <matthew.d.roper@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111641
Fixes: 0c1279b58fc7 ("drm/i915: Consolidate {bxt,cnl,icl}_init_cdclk")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-2-ville.syrjala@linux.intel.com

drm/i915: Fix cdclk bypass freq readout for tgl/bxt/glk

On tgl/bxt/glk the cdclk bypass frequency depends on the PLL
reference clock. So let's read out the ref clock before we
try to compute the bypass clock.

Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 71dc367e2bc3 ("drm/i915: Consolidate bxt/cnl/icl cdclk readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-1-ville.syrjala@linux.intel.com

drm/i915: add INTEL_NUM_PIPES() and use it

Abstract away direct access to ->num_pipes to allow further
refactoring. No functional changes.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911092608.13009-1-jani.nikula@intel.com

drm/i915: Squeeze iommu status into debugfs/i915_capabilities

There's no easy way of checking whether iommu is enabled for the GPU
(you can grep dmesg if you know the device, or you can grep
i915_gpu_info if that's available). We do have a central
i915_capabilities with the intent of listing such pertinent information,
so add the iommu status.

Suggested-by: Martin Peres <martin.peres@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Martin Peres <martin.peres@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911114655.9254-1-chris@chris-wilson.co.uk

drm/i915/tgl: Disable read-only ppgtt support

The same read-only affliction as befell Icelake is affecting Tigerlake.
Disable the read-only support as clearly it was not fixed.

Testcase: igt/i915_selftests/live_gem_context
References: 3936867dbc1e ("drm/i915: Disable read only ppgtt support for gen11")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911125717.28997-1-chris@chris-wilson.co.uk

drm/i915: Remove pointless planes_changed=true assignment

i915 doesn't use the crtc_state->plane_changed flag for anything,
so setting it is pointless.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Use a high priority wq for nonblocking plane updates

system_unbound_wq can't keep up sometimes and we get dropped frames.
Switch to a high priority variant.

Reported-by: Heinrich Fink <heinrich.fink@daqri.com>
Tested-by: Heinrich Fink <heinrich.fink@daqri.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910121347.22958-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/display: Add glk_cdclk_table

Commit 736da8112fee ("drm/i915: Use literal representation of cdclk
tables") pushed the cdclk logic into tables, adding glk_cdclk_table but
not using yet:

drivers/gpu/drm/i915/display/intel_cdclk.c:1173:38: error: ‘glk_cdclk_table’ defined but not used [-Werror=unused-const-variable=]

Fixes: 736da8112fee ("drm/i915: Use literal representation of cdclk tables")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911074727.32585-1-chris@chris-wilson.co.uk

drm/i915: Make i915_vma.flags atomic_t for mutex reduction

In preparation for reducing struct_mutex stranglehold around the vm,
make the vma.flags atomic so that we can acquire a pin on the vma
atomically before deciding if we need to take the mutex.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911090243.16786-1-chris@chris-wilson.co.uk

drm/i915: Whitelist COMMON_SLICE_CHICKEN2

This allows userspace to use "legacy" mode for push constants, where
they are committed at 3DPRIMITIVE or flush time, rather than being
committed at 3DSTATE_BINDING_TABLE_POINTERS_XS time.  Gen6-8 and Gen11
both use the "legacy" behavior - only Gen9 works in the "new" way.

Conflating push constants with binding tables is painful for userspace,
we would like to be able to avoid doing so.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911014801.26821-1-kenneth@whitecape.org

drm/i915: Make shrink/unshrink be atomic

Add an atomic counter and always take the spinlock around the pin/unpin
events, so that we can perform the list manipulation concurrently.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910212204.17190-1-chris@chris-wilson.co.uk

drm/i915: Make pm_notify take intel_gt

These notifications operate on intel_gt so make the code take what it
needs.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-5-tvrtko.ursulin@linux.intel.com

drm/i915: Avoid round-trip via i915 in intel_gt_park

Both in the container_of and getting to gt->awake there is no need to go
via i915 since both the wakeref and awake are members of gt.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-4-tvrtko.ursulin@linux.intel.com

drm/i915: Make wait_for_timelines take struct intel_gt

Timelines live in struct intel_gt so make wait_for_timelines take
exactly what it needs.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-3-tvrtko.ursulin@linux.intel.com

drm/i915: Move GT init to intel_gt.c

Code in i915_gem_init_hw is all about GT init so move it to intel_gt.c
renaming to intel_gt_init_hw.

Existing intel_gt_init_hw is renamed to intel_gt_init_hw_early since it
is currently called from driver probe.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-2-tvrtko.ursulin@linux.intel.com