Deren Wu [Sat, 14 Jan 2023 04:56:46 +0000 (12:56 +0800)]
wifi: mt76: add flexible polling wait-interval support
[ Upstream commit
35effe6c0c24adcf0f732bb1c3d75573d4c88e63 ]
The default waiting unit is 10ms and the value is too much for
data path related control. Provide a new API mt76_poll_msec_tick()
to support different cases, such as 1ms polling waiting kick.
Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of:
c397fc1e6365 ("wifi: mt76: mt7921e: fix probe timeout after reboot")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kang Chen [Mon, 27 Feb 2023 14:48:23 +0000 (22:48 +0800)]
wifi: mt76: handle failure of vzalloc in mt7615_coredump_work
[ Upstream commit
9e47dd9f64a47ae00ca0123017584c37209ee900 ]
vzalloc may fails, dump might be null and will cause
illegal address access later.
Link: https://lore.kernel.org/all/Y%2Fy5Asxw3T3m4jCw@lore-desk
Fixes:
d2bf7959d9c0 ("mt76: mt7663: introduce coredump support")
Signed-off-by: Kang Chen <void0red@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenz Brun [Sat, 18 Feb 2023 11:29:45 +0000 (12:29 +0100)]
wifi: mt76: mt7915: expose device tree match table
[ Upstream commit
90fb69212c60e26ef70ed0e8532b116c7649ac88 ]
On MT7986 the WiFi driver currently does not get automatically loaded,
requiring manual modprobing because the device tree compatibles are not
exported into metadata.
Add the missing MODULE_DEVICE_TABLE macro to fix this.
Fixes:
99ad32a4ca3a2 ("mt76: mt7915: add support for MT7986")
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Emmanuel Grumbach [Sun, 16 Apr 2023 12:47:38 +0000 (15:47 +0300)]
wifi: iwlwifi: make the loop for card preparation effective
[ Upstream commit
28965ec0b5d9112585f725660e2ff13218505ace ]
Since we didn't reset t to 0, only the first iteration of the loop
did checked the ready bit several times.
From the second iteration and on, we just tested the bit once and
continued to the next iteration.
Reported-and-tested-by: Lorenzo Zolfanelli <lorenzo@zolfa.nl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216452
Fixes:
289e5501c314 ("iwlwifi: fix the preparation of the card")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.615b683ab9c8.Ic52c3229d3345b0064fa34263293db095d88daf8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Begunkov [Thu, 13 Apr 2023 14:28:05 +0000 (15:28 +0100)]
io_uring/rsrc: use nospec'ed indexes
[ Upstream commit
953c37e066f05a3dca2d74643574b8dfe8a83983 ]
We use array_index_nospec() for registered buffer indexes, but don't use
it while poking into rsrc tags, fix that.
Fixes:
634d00df5e1cf ("io_uring: add full-fledged dynamic buffers support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f02fafc5a9c0dd69be2b0618c38831c078232ff0.1681395792.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Wed, 29 Mar 2023 15:49:32 +0000 (17:49 +0200)]
jdb2: Don't refuse invalidation of already invalidated buffers
[ Upstream commit
bd159398a2d2234de07d310132865706964aaaa7 ]
When invalidating buffers under the partial tail page,
jbd2_journal_invalidate_folio() returns -EBUSY if the buffer is part of
the committing transaction as we cannot safely modify buffer state.
However if the buffer is already invalidated (due to previous
invalidation attempts from ext4_wait_for_tail_page_commit()), there's
nothing to do and there's no point in returning -EBUSY. This fixes
occasional warnings from ext4_journalled_invalidate_folio() triggered by
generic/051 fstest when blocksize < pagesize.
Fixes:
53e872681fed ("ext4: fix deadlock in journal_unmap_buffer()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Rix [Fri, 14 Apr 2023 10:11:58 +0000 (13:11 +0300)]
wifi: iwlwifi: fw: move memset before early return
[ Upstream commit
8ce437dd5b2e4adef13aa4ecce07392f9966b1ab ]
Clang static analysis reports this representative issue
dbg.c:1455:6: warning: Branch condition evaluates to
a garbage value
if (!rxf_data.size)
^~~~~~~~~~~~~~
This check depends on iwl_ini_get_rxf_data() to clear
rxf_data but the function can return early without
doing the clear. So move the memset before the early
return.
Fixes:
cc9b6012d34b ("iwlwifi: yoyo: use hweight_long instead of bit manipulating")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.872a7175f1ff.I33802a77a91998276992b088fbe25f61c87c33ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Rix [Fri, 14 Apr 2023 10:11:57 +0000 (13:11 +0300)]
wifi: iwlwifi: mvm: initialize seq variable
[ Upstream commit
11e94d2bcd88dea5d9ce99555b6b172f5232d3e2 ]
Clang static analysis reports this issue
d3.c:567:22: warning: The left operand of '>' is
a garbage value
if (seq.tkip.iv32 > cur_rx_iv32)
~~~~~~~~~~~~~ ^
seq is never initialized. Call ieee80211_get_key_rx_seq() to
initialize seq.
Fixes:
0419e5e672d6 ("iwlwifi: mvm: d3: separate TKIP data from key iteration")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.6dd372f84f93.If1f708c90e6424a935b4eba3917dfb7582e0dd0a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Gabay [Thu, 13 Apr 2023 18:40:34 +0000 (21:40 +0300)]
wifi: iwlwifi: yoyo: Fix possible division by zero
[ Upstream commit
ba30415118eee374a08b39a0460a1d1e52c24a25 ]
Don't allow buffer allocation TLV with zero req_size since it
leads later to division by zero in iwl_dbg_tlv_alloc_fragments().
Also, NPK/SRAM locations are allowed to have zero buffer req_size,
don't discard them.
Fixes:
a9248de42464 ("iwlwifi: dbg_ini: add TLV allocation new API support")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.5d6688ed74d8.I5c2f3a882b50698b708d54f4524dc5bdf11e3d32@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Gabay [Thu, 13 Apr 2023 18:40:33 +0000 (21:40 +0300)]
wifi: iwlwifi: yoyo: skip dump correctly on hw error
[ Upstream commit
11195ab0d6f3202cf7af1a4c69570f59c377d8ad ]
When NIC is in a bad state, reading data will return 28 bits as
0xa5a5a5a and the lowest 4 bits are not fixed value.
Mask these bits in a few places to skip the dump correctly.
Fixes:
89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.df6c0663179d.I36d8487b2419c6fefa65e5514855d94327c3b1eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ayala Beker [Thu, 13 Apr 2023 18:40:22 +0000 (21:40 +0300)]
wifi: iwlwifi: mvm: don't drop unencrypted MCAST frames
[ Upstream commit
8e5a26360cbe29b896b6758518280d41c3704d43 ]
MCAST frames are filtered out by the driver if we are not
authorized yet.
Fix it to filter out only protected frames.
Fixes:
147eb05f24e6 ("iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.9cedcc27db60.I8fb7057981392660da482dd215e85c15946d3f4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Tue, 14 Mar 2023 01:22:58 +0000 (09:22 +0800)]
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
[ Upstream commit
7cddb055bfda5f7b0be931e8ea750fc28bc18a27 ]
handle_read_error() will resumit r10_bio by raid10_read_request(), which
will call bio_start_io_acct() again, while bio_end_io_acct() will only
be called once.
Fix the problem by don't account io again from handle_read_error().
Fixes:
528bc2cf2fcc ("md/raid10: enable io accounting")
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230314012258.2395894-1-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Fri, 10 Mar 2023 07:38:55 +0000 (15:38 +0800)]
md/raid10: fix memleak of md thread
[ Upstream commit
f0ddb83da3cbbf8a1f9087a642c448ff52ee9abd ]
In raid10_run(), if setup_conf() succeed and raid10_run() failed before
setting 'mddev->thread', then in the error path 'conf->thread' is not
freed.
Fix the problem by setting 'mddev->thread' right after setup_conf().
Fixes:
43a521238aca ("md-cluster: choose correct label when clustered layout is not supported")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-7-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Fri, 10 Mar 2023 07:38:54 +0000 (15:38 +0800)]
md/raid10: fix memleak for 'conf->bio_split'
[ Upstream commit
c9ac2acde53f5385de185bccf6aaa91cf9ac1541 ]
In the error path of raid10_run(), 'conf' need be freed, however,
'conf->bio_split' is missed and memory will be leaked.
Since there are 3 places to free 'conf', factor out a helper to fix the
problem.
Fixes:
fc9977dd069e ("md/raid10: simplify the splitting of requests.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-6-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Fri, 10 Mar 2023 07:38:53 +0000 (15:38 +0800)]
md/raid10: fix leak of 'r10bio->remaining' for recovery
[ Upstream commit
26208a7cffd0c7cbf14237ccd20c7270b3ffeb7e ]
raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.
Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid.
Fixes:
24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-5-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Nan [Wed, 22 Feb 2023 04:09:59 +0000 (12:09 +0800)]
md/raid10: fix task hung in raid10d
[ Upstream commit
72c215ed8731c88b2d7e09afc51fffc207ae47b8 ]
commit
fe630de009d0 ("md/raid10: avoid deadlock on recovery.") allowed
normal io and sync io to exist at the same time. Task hung will occur as
below:
T1 T2 T3 T4
raid10d
handle_read_error
allow_barrier
conf->nr_pending--
-> 0
//submit sync io
raid10_sync_request
raise_barrier
->will not be blocked
...
//submit to drivers
raid10_read_request
wait_barrier
conf->nr_pending++
-> 1
//retry read fail
raid10_end_read_request
reschedule_retry
add to retry_list
conf->nr_queued++
-> 1
//sync io fail
end_sync_read
__end_sync_read
reschedule_retry
add to retry_list
conf->nr_queued++
-> 2
...
handle_read_error
get form retry_list
conf->nr_queued--
freeze_array
wait nr_pending == nr_queued+1
->1 ->2
//task hung
retry read and sync io will be added to retry_list(nr_queued->2) if they
fails. raid10d() called handle_read_error() and hung in freeze_array().
nr_queued will not decrease because raid10d is blocked, nr_pending will
not increase because conf->barrier is not released.
Fix it by moving allow_barrier() after raid10_read_request().
raise_barrier() will wait for nr_waiting to become 0. Therefore, sync io
and regular io will not be issued at the same time.
Also remove the check of nr_queued in stop_waiting_barrier. It can be 0
but don't need to be blocking. Remove the check for MD_RECOVERY_RUNNING as
the check is redundent.
Fixes:
fe630de009d0 ("md/raid10: avoid deadlock on recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230222041000.3341651-2-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Wed, 5 Apr 2023 14:45:36 +0000 (22:45 +0800)]
f2fs: fix to check return value of inc_valid_block_count()
[ Upstream commit
935fc6fa6466cf18dd72dd1518ebc7bfc4cd58a4 ]
In __replace_atomic_write_block(), we missed to check return value
of inc_valid_block_count(), for extreme testcase that f2fs image is
run out of space, it may cause inconsistent status in between SIT
table and total valid block count.
Cc: Daeho Jeong <daehojeong@google.com>
Fixes:
3db1de0e582c ("f2fs: change the current atomic write way")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Wed, 5 Apr 2023 14:44:53 +0000 (22:44 +0800)]
f2fs: fix to check return value of f2fs_do_truncate_blocks()
[ Upstream commit
b851ee6ba3cc212641e622ebcf92b950c7bafa07 ]
Otherwise, if truncation on cow_inode failed, remained data may
pollute current transaction of atomic write.
Cc: Daeho Jeong <daehojeong@google.com>
Fixes:
a46bebd502fe ("f2fs: synchronize atomic write aborts")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Borkmann [Thu, 13 Apr 2023 18:28:42 +0000 (20:28 +0200)]
bpf, sockmap: Revert buggy deadlock fix in the sockhash and sockmap
[ Upstream commit
8c5c2a4898e3d6bad86e29d471e023c8a19ba799 ]
syzbot reported a splat and bisected it to recent commit
ed17aa92dc56 ("bpf,
sockmap: fix deadlocks in the sockhash and sockmap"):
[...]
WARNING: CPU: 1 PID: 9280 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
Modules linked in:
CPU: 1 PID: 9280 Comm: syz-executor.1 Not tainted 6.2.0-syzkaller-13249-gd319f344561d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
[...]
Call Trace:
<TASK>
spin_unlock_bh include/linux/spinlock.h:395 [inline]
sock_map_del_link+0x2ea/0x510 net/core/sock_map.c:165
sock_map_unref+0xb0/0x1d0 net/core/sock_map.c:184
sock_hash_delete_elem+0x1ec/0x2a0 net/core/sock_map.c:945
map_delete_elem kernel/bpf/syscall.c:1536 [inline]
__sys_bpf+0x2edc/0x53e0 kernel/bpf/syscall.c:5053
__do_sys_bpf kernel/bpf/syscall.c:5166 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5164 [inline]
__x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5164
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fe8f7c8c169
</TASK>
[...]
Revert for now until we have a proper solution.
Fixes:
ed17aa92dc56 ("bpf, sockmap: fix deadlocks in the sockhash and sockmap")
Reported-by: syzbot+49f6cef45247ff249498@syzkaller.appspotmail.com
Cc: Hsin-Wei Hung <hsinweih@uci.edu>
Cc: Xin Liu <liuxin350@huawei.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/000000000000f1db9605f939720e@google.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Avraham Stern [Thu, 13 Apr 2023 07:44:15 +0000 (10:44 +0300)]
wifi: iwlwifi: mvm: don't set CHECKSUM_COMPLETE for unsupported protocols
[ Upstream commit
217f3c52f00d3419ecdd38a99a7eceecb11679b2 ]
On Bz devices, CHECKSUM_COMPLETE was set for unsupported protocols
which results in a warning. Fix it.
Fixes:
b6f5b647f694 ("iwlwifi: mvm: handle RX checksum on Bz devices")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.a2a35286f0ca.I50daa9445a6465514c44f5096c32adef64beba5f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Avraham Stern [Thu, 13 Apr 2023 07:44:14 +0000 (10:44 +0300)]
wifi: iwlwifi: trans: don't trigger d3 interrupt twice
[ Upstream commit
277f56a141fc54ef7f9e09dba65fb2e12021411d ]
When the IPC registers are used for sleep control, setting
the IPC sleep bit already triggers an interrupt to the fw, so
there is no need to also set the doorbell. Setting also the
doorbell triggers the sleep interrupt twice which lead to
an assert.
Fixes:
af08571d3925 ("iwlwifi: pcie: support Bz suspend/resume trigger")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.b5f2f6e44d38.I4cb5b6ad4914db47a714e731c4c8b4db679cabce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Thu, 13 Apr 2023 07:44:01 +0000 (10:44 +0300)]
wifi: iwlwifi: debug: fix crash in __iwl_err()
[ Upstream commit
634c7b1bd08ca322537ab389f8cbd7bb543b5e45 ]
In __iwl_err(), if we rate-limit the message away, then
vaf.va is still NULL-initialized by the time we get to
the tracing code, which then crashes. When it doesn't
get rate-limited out, it's still wrong to reuse the old
args2 that was already printed, which is why we bother
making a copy in the first place.
Assign vaf.va properly to fix this.
Fixes:
e5f1cc98cc1b ("iwlwifi: allow rate-limited error messages")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.e27134c6bcd4.Ib3894cd2ba7a5ad5e75912a7634f146ceaa569e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Thu, 13 Apr 2023 06:40:38 +0000 (08:40 +0200)]
blk-mq: don't plug for head insertions in blk_execute_rq_nowait
[ Upstream commit
50947d7fe9fa6abe3ddc40769dfb02a51c58edb6 ]
Plugs never insert at head, so don't plug for head insertions.
Fixes:
1c2d2fff6dc0 ("block: wire-up support for passthrough plugging")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Song Liu [Wed, 12 Apr 2023 21:04:22 +0000 (14:04 -0700)]
selftests/bpf: Fix leaked bpf_link in get_stackid_cannot_attach
[ Upstream commit
c1e07a80cf23d3a6e96172bc9a73bfa912a9fcbc ]
skel->links.oncpu is leaked in one case. This causes test perf_branches
fails when it runs after get_stackid_cannot_attach:
./test_progs -t get_stackid_cannot_attach,perf_branches
84 get_stackid_cannot_attach:OK
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:FAIL:output not valid no valid sample from prog
146/1 perf_branches/perf_branches_hw:FAIL
146/2 perf_branches/perf_branches_no_hw:OK
146 perf_branches:FAIL
All error logs:
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:FAIL:output not valid no valid sample from prog
146/1 perf_branches/perf_branches_hw:FAIL
146 perf_branches:FAIL
Summary: 1/1 PASSED, 0 SKIPPED, 1 FAILED
Fix this by adding the missing bpf_link__destroy().
Fixes:
346938e9380c ("selftests/bpf: Add get_stackid_cannot_attach")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230412210423.900851-3-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Song Liu [Wed, 12 Apr 2023 21:04:21 +0000 (14:04 -0700)]
selftests/bpf: Use read_perf_max_sample_freq() in perf_event_stackmap
[ Upstream commit
de6d014a09bf12a9a8959d60c0a1d4a41d394a89 ]
Currently, perf_event sample period in perf_event_stackmap is set too low
that the test fails randomly. Fix this by using the max sample frequency,
from read_perf_max_sample_freq().
Move read_perf_max_sample_freq() to testing_helpers.c. Replace the CHECK()
with if-printf, as CHECK is not available in testing_helpers.c.
Fixes:
1da4864c2b20 ("selftests/bpf: Add callchain_stackid")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230412210423.900851-2-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Wed, 12 Apr 2023 08:49:04 +0000 (16:49 +0800)]
nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage"
[ Upstream commit
4f86a6ff6fbd891232dda3ca97fd1b9630b59809 ]
fcloop_fcp_op() could be called from flush request's ->end_io(flush_end_io) in
which the spinlock of fq->mq_flush_lock is grabbed with irq saved/disabled.
So fcloop_fcp_op() can't call spin_unlock_irq(&tfcp_req->reqlock) simply
which enables irq unconditionally.
Fixes the warning by switching to spin_lock_irqsave()/spin_unlock_irqrestore()
Fixes:
c38dbbfab1bc ("nvme-fcloop: fix inconsistent lock state warnings")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keith Busch [Wed, 5 Apr 2023 21:57:20 +0000 (14:57 -0700)]
nvme: fix async event trace event
[ Upstream commit
6622b76fe922b94189499a90ccdb714a4a8d0773 ]
Mixing AER Event Type and Event Info has masking clashes. Just print the
event type, but also include the event info of the AER result in the
trace.
Fixes:
09bd1ff4b15143b ("nvme-core: add async event trace helper")
Reported-by: Nate Thornton <nate.thornton@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Damien Le Moal [Wed, 15 Mar 2023 10:59:38 +0000 (19:59 +0900)]
nvmet: fix I/O Command Set specific Identify Controller
[ Upstream commit
a5a6ab0950b46ab1ef4a5c83c80234018b81b38a ]
For an identify command with cns set to NVME_ID_CNS_CS_CTRL, the NVMe
2.0 specification states that:
If the I/O Command Set specified by the CSI field does not have an
Identify Controller data structure, then the controller shall return
a zero filled data structure. If the host requests a data structure for
an I/O Command Set that the controller does not support, the controller
shall abort the command with a status code of Invalid Field in Command.
However, the current implementation of this identify command in
nvmet_execute_identify() only handles the ZNS command set, returning an
error for the NVM command set, which is not compliant with the
specifications as we do support this command set.
Fix this by:
1) Renaming nvmet_execute_identify_cns_cs_ctrl() to
nvmet_execute_identify_ctrl_zns() to continue handling the
ZNS command set as is.
2) Introduce a nvmet_execute_identify_ctrl_ns() helper to handle the
NVM command set, returning a zero filled nvme_id_ctrl_nvm data
structure.
3) Modify nvmet_execute_identify() to call these helpers based on
the csi specified, returning an error for unsupported command sets.
Fixes:
aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Damien Le Moal [Wed, 15 Mar 2023 10:59:37 +0000 (19:59 +0900)]
nvmet: fix Identify Active Namespace ID list handling
[ Upstream commit
97416f67d55fb8b866ff1815ca7ef26b6dfa6a5e ]
The identify command with cns set to NVME_ID_CNS_NS_ACTIVE_LIST does
not depend on the command set. The execution of this command should
thus not look at the csi field specified in the command. Simplify
nvmet_execute_identify() to directly call
nvmet_execute_identify_nslist() without the csi switch-case.
Fixes:
ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Damien Le Moal [Wed, 15 Mar 2023 10:59:36 +0000 (19:59 +0900)]
nvmet: fix Identify Controller handling
[ Upstream commit
62904b3b333e7f3c0f879dc3513295eee5765c9f ]
The identify command with cns set to NVME_ID_CNS_CTRL does not depend on
the command set. The execution of this command should thus not look at
the csi specified in the command. Simplify nvmet_execute_identify() to
directly call nvmet_execute_identify_ctrl() without the csi switch-case.
Fixes:
ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Damien Le Moal [Wed, 15 Mar 2023 10:59:35 +0000 (19:59 +0900)]
nvmet: fix Identify Namespace handling
[ Upstream commit
8c098aa00118c35108f0c19bd3cdc45e11574948 ]
The identify command with cns set to NVME_ID_CNS_NS does not directly
depend on the command set. The NVMe specifications is rather confusing
here as it appears that this command only applies to the NVM command
set. However, footnote 8 of Figure 273 in the NVMe 2.0 base
specifications clearly state that this command applies to NVM command
sets that support logical blocks, that is, NVM and ZNS. Both the NVM and
ZNS command set specifications also list this identify as mandatory.
The command handling should thus not look at the csi field since it is
defined as unused for this command. Given that we do not support the
KV command set, simply remove the csi switch-case for that command
handling and call directly nvmet_execute_identify_ns() in
nvmet_execute_identify().
Fixes:
ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Damien Le Moal [Tue, 14 Mar 2023 06:20:36 +0000 (15:20 +0900)]
nvmet: fix error handling in nvmet_execute_identify_cns_cs_ns()
[ Upstream commit
ab76e7206b672b2e8818cb121a04506956d6b223 ]
Nvme specifications state that:
If the I/O Command Set associated with the namespace identified by the
NSID field does not support the Identify Namespace data structure
specified by the CSI field, the controller shall abort the command with
a status code of Invalid Field in Command.
In other words, if nvmet_execute_identify_cns_cs_ns() is called for a
target with a block device that is not zoned, we should not return any
data and set the status to NVME_SC_INVALID_FIELD.
While at it, it is also better to revalidate the ns block devie *before*
checking if the block device is zoned, to ensure that
nvmet_execute_identify_cns_cs_ns() operates against updated device
characteristics.
Fixes:
aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xin Liu [Thu, 6 Apr 2023 12:26:22 +0000 (20:26 +0800)]
bpf, sockmap: fix deadlocks in the sockhash and sockmap
[ Upstream commit
ed17aa92dc56b6d8883e4b7a8f1c6fbf5ed6cd29 ]
When huang uses sched_switch tracepoint, the tracepoint
does only one thing in the mounted ebpf program, which
deletes the fixed elements in sockhash ([0])
It seems that elements in sockhash are rarely actively
deleted by users or ebpf program. Therefore, we do not
pay much attention to their deletion. Compared with hash
maps, sockhash only provides spin_lock_bh protection.
This causes it to appear to have self-locking behavior
in the interrupt context.
[0]:https://lore.kernel.org/all/CABcoxUayum5oOqFMMqAeWuS8+EzojquSOSyDA3J_2omY=2EeAg@mail.gmail.com/
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Fixes:
604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230406122622.109978-1-liuxin350@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
P Praneesh [Fri, 24 Mar 2023 14:57:01 +0000 (16:57 +0200)]
wifi: ath11k: fix writing to unintended memory region
[ Upstream commit
756a7f90878f0866fd2fe167ef37e90b47326b96 ]
While initializing spectral, the magic value is getting written to the
invalid memory address leading to random boot-up crash. This occurs
due to the incorrect index increment in ath11k_dbring_fill_magic_value
function. Fix it by replacing the existing logic with memset32 to ensure
there is no invalid memory access.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1
Fixes:
d3d358efc553 ("ath11k: add spectral/CFR buffer validation support")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230321052900.16895-1-quic_ppranees@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Reichel [Fri, 7 Apr 2023 16:11:29 +0000 (18:11 +0200)]
net: ethernet: stmmac: dwmac-rk: fix optional phy regulator handling
[ Upstream commit
db21973263f8c56750cb610f1d5e8bee00a513b9 ]
The usual devm_regulator_get() call already handles "optional"
regulators by returning a valid dummy and printing a warning
that the dummy regulator should be described properly. This
code open coded the same behaviour, but masked any errors that
are not -EPROBE_DEFER and is quite noisy.
This change effectively unmasks and propagates regulators errors
not involving -ENODEV, downgrades the error print to warning level
if no regulator is specified and captures the probe defer message
for /sys/kernel/debug/devices_deferred.
Fixes:
2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Reichel [Fri, 7 Apr 2023 16:11:28 +0000 (18:11 +0200)]
net: ethernet: stmmac: dwmac-rk: rework optional clock handling
[ Upstream commit
ea449f7fa0bf3fcd02e04a770b9ff707bf5e8f96 ]
The clock requesting code is quite repetitive. Fix this by requesting
the clocks via devm_clk_bulk_get_optional. The optional variant has been
used, since this is effectively what the old code did. The exact clocks
required depend on the platform and configuration. As a side effect
this change adds correct -EPROBE_DEFER handling.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Fixes:
7ad269ea1a2b ("GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shuchang Li [Tue, 4 Apr 2023 07:21:32 +0000 (15:21 +0800)]
scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup()
[ Upstream commit
91a0c0c1413239d0548b5aac4c82f38f6d53a91e ]
When if_type equals zero and pci_resource_start(pdev, PCI_64BIT_BAR4)
returns false, drbl_regs_memmap_p is not remapped. This passes a NULL
pointer to iounmap(), which can trigger a WARN() on certain arches.
When if_type equals six and pci_resource_start(pdev, PCI_64BIT_BAR4)
returns true, drbl_regs_memmap_p may has been remapped and
ctrl_regs_memmap_p is not remapped. This is a resource leak and passes a
NULL pointer to iounmap().
To fix these issues, we need to add null checks before iounmap(), and
change some goto labels.
Fixes:
1351e69fc6db ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Shuchang Li <lishuchang@hust.edu.cn>
Link: https://lore.kernel.org/r/20230404072133.1022-1-lishuchang@hust.edu.cn
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Feng Zhou [Mon, 10 Apr 2023 08:59:07 +0000 (16:59 +0800)]
bpf/btf: Fix is_int_ptr()
[ Upstream commit
91f2dc6838c19342f7f2993627c622835cc24890 ]
When tracing a kernel function with arg type is u32*, btf_ctx_access()
would report error: arg2 type INT is not a struct.
The commit
bb6728d75611 ("bpf: Allow access to int pointer arguments
in tracing programs") added support for int pointer, but did not skip
modifiers before checking it's type. This patch fixes it.
Fixes:
bb6728d75611 ("bpf: Allow access to int pointer arguments in tracing programs")
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230410085908.98493-2-zhoufeng.zf@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gregory Greenman [Mon, 10 Apr 2023 14:07:21 +0000 (17:07 +0300)]
wifi: iwlwifi: fix duplicate entry in iwl_dev_info_table
[ Upstream commit
fc3c2f0ed86b65dff4b6844c59c597b977cae533 ]
There're two identical entries for ax1650 device in
iwl_dev_info_table. Remove one of the duplicate entries.
Fixes:
953e66a7238b ("iwlwifi: add new ax1650 killer device")
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230410140721.897683-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Mon, 10 Apr 2023 02:14:02 +0000 (10:14 +0800)]
f2fs: fix to avoid use-after-free for cached IPU bio
[ Upstream commit
5cdb422c839134273866208dad5360835ddb9794 ]
xfstest generic/019 reports a bug:
kernel BUG at mm/filemap.c:1619!
RIP: 0010:folio_end_writeback+0x8a/0x90
Call Trace:
end_page_writeback+0x1c/0x60
f2fs_write_end_io+0x199/0x420
bio_endio+0x104/0x180
submit_bio_noacct+0xa5/0x510
submit_bio+0x48/0x80
f2fs_submit_write_bio+0x35/0x300
f2fs_submit_merged_ipu_write+0x2a0/0x2b0
f2fs_write_single_data_page+0x838/0x8b0
f2fs_write_cache_pages+0x379/0xa30
f2fs_write_data_pages+0x30c/0x340
do_writepages+0xd8/0x1b0
__writeback_single_inode+0x44/0x370
writeback_sb_inodes+0x233/0x4d0
__writeback_inodes_wb+0x56/0xf0
wb_writeback+0x1dd/0x2d0
wb_workfn+0x367/0x4a0
process_one_work+0x21d/0x430
worker_thread+0x4e/0x3c0
kthread+0x103/0x130
ret_from_fork+0x2c/0x50
The root cause is: after cp_error is set, f2fs_submit_merged_ipu_write()
in f2fs_write_single_data_page() tries to flush IPU bio in cache, however
f2fs_submit_merged_ipu_write() missed to check validity of @bio parameter,
result in submitting random cached bio which belong to other IO context,
then it will cause use-after-free issue, fix it by adding additional
validity check.
Fixes:
0b20fcec8651 ("f2fs: cache global IPU bio")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kal Conley [Wed, 5 Apr 2023 23:59:18 +0000 (01:59 +0200)]
xsk: Fix unaligned descriptor validation
[ Upstream commit
d769ccaf957fe7391f357c0a923de71f594b8a2b ]
Make sure unaligned descriptors that straddle the end of the UMEM are
considered invalid. Currently, descriptor validation is broken for
zero-copy mode which only checks descriptors at page granularity.
For example, descriptors in zero-copy mode that overrun the end of the
UMEM but not a page boundary are (incorrectly) considered valid. The
UMEM boundary check needs to happen before the page boundary and
contiguity checks in xp_desc_crosses_non_contig_pg(). Do this check in
xp_unaligned_validate_desc() instead like xp_check_unaligned() already
does.
Fixes:
2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230405235920.7305-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Herbert Xu [Tue, 28 Mar 2023 03:35:23 +0000 (11:35 +0800)]
crypto: drbg - Only fail when jent is unavailable in FIPS mode
[ Upstream commit
686cd976b6ddedeeb1a1fb09ba53a891d3cc9a03 ]
When jent initialisation fails for any reason other than ENOENT,
the entire drbg fails to initialise, even when we're not in FIPS
mode. This is wrong because we can still use the kernel RNG when
we're not in FIPS mode.
Change it so that it only fails when we are in FIPS mode.
Fixes:
57225e679788 ("crypto: drbg - Use callback API for random readiness")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quentin Monnet [Wed, 5 Apr 2023 13:21:15 +0000 (14:21 +0100)]
bpftool: Fix bug for long instructions in program CFG dumps
[ Upstream commit
67cf52cdb6c8fa6365d29106555dacf95c9fd374 ]
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes:
efcef17a6d65 ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YiFei Zhu [Wed, 5 Apr 2023 19:33:54 +0000 (19:33 +0000)]
selftests/bpf: Wait for receive in cg_storage_multi test
[ Upstream commit
5af607a861d43ffff830fc1890033e579ec44799 ]
In some cases the loopback latency might be large enough, causing
the assertion on invocations to be run before ingress prog getting
executed. The assertion would fail and the test would flake.
This can be reliably reproduced by arbitrarily increasing the
loopback latency (thanks to [1]):
tc qdisc add dev lo root handle 1: htb default 12
tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps
tc qdisc add dev lo parent 1:12 netem delay 100ms
Fix this by waiting on the receive end, instead of instantly
returning to the assert. The call to read() will wait for the
default SO_RCVTIMEO timeout of 3 seconds provided by
start_server().
[1] https://gist.github.com/kstevens715/4598301
Reported-by: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/
Fixes:
3573f384014f ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress")
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kal Conley [Mon, 3 Apr 2023 12:03:59 +0000 (14:03 +0200)]
selftests: xsk: Deflakify STATS_RX_DROPPED test
[ Upstream commit
68e7322142f5e731af222892d384d311835db0f1 ]
Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after
receiving the last (valid) packet which is not the final packet sent in
the test (valid and invalid packets are sent in alternating fashion with
the final packet being invalid). Since the last packet may or may not
have been dropped already, both outcomes must be allowed.
This issue could also be fixed by making sure the last packet sent is
valid. This alternative is left as an exercise to the reader (or the
benevolent maintainers of this file).
This problem was quite visible on certain setups. On one machine this
failure was observed 50% of the time.
Also, remove a redundant assignment of pkt_stream->nb_pkts. This field
is already initialized by __pkt_stream_alloc.
Fixes:
27e934bec35b ("selftests: xsk: make stat tests not spin on getsockopt")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403120400.31018-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kal Conley [Wed, 5 Apr 2023 08:29:04 +0000 (10:29 +0200)]
selftests: xsk: Disable IPv6 on VETH1
[ Upstream commit
f2b50f17268390567bc0e95642170d88f336c8f4 ]
This change fixes flakiness in the BIDIRECTIONAL test:
# [is_pkt_valid] expected length [60], got length [90]
not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL
When IPv6 is enabled, the interface will periodically send MLDv1 and
MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail
since it uses VETH0 for RX.
For other tests, this was not a problem since they only receive on VETH1
and IPv6 was already disabled on VETH0.
Fixes:
a89052572ebb ("selftests/bpf: Xsk selftests framework")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405082905.6303-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kal Conley [Mon, 3 Apr 2023 14:50:46 +0000 (16:50 +0200)]
selftests: xsk: Use correct UMEM size in testapp_invalid_desc
[ Upstream commit
7a2050df244e2c9a4e90882052b7907450ad10ed ]
Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when
the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the
macro since it's no longer being used.
Fixes:
909f0e28207c ("selftests: xsk: Add tests for 2K frame size")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Simon Horman [Mon, 3 Apr 2023 15:43:16 +0000 (17:43 +0200)]
net: qrtr: correct types of trace event parameters
[ Upstream commit
054fbf7ff8143d35ca7d3bb5414bb44ee1574194 ]
The arguments passed to the trace events are of type unsigned int,
however the signature of the events used __le32 parameters.
I may be missing the point here, but sparse flagged this and it
does seem incorrect to me.
net/qrtr/ns.c: note: in included file (through include/trace/trace_events.h, include/trace/define_trace.h, include/trace/events/qrtr.h):
./include/trace/events/qrtr.h:11:1: warning: cast to restricted __le32
./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer
./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer
... (a lot more similar warnings)
net/qrtr/ns.c:115:47: expected restricted __le32 [usertype] service
net/qrtr/ns.c:115:47: got unsigned int service
net/qrtr/ns.c:115:61: warning: incorrect type in argument 2 (different base types)
... (a lot more similar warnings)
Fixes:
dfddb54043f0 ("net: qrtr: Add tracepoint support")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230402-qrtr-trace-types-v1-1-92ad55008dd3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qilin Tan [Fri, 31 Mar 2023 09:26:56 +0000 (17:26 +0800)]
f2fs: fix iostat lock protection
[ Upstream commit
144f1cd40bf91fb3ac1d41806470756ce774f389 ]
Made iostat lock irq safe to avoid potentinal deadlock.
Deadlock scenario:
f2fs_attr_store
-> f2fs_sbi_store
-> _sbi_store
-> spin_lock(sbi->iostat_lock)
<interrupt request>
-> scsi_end_request
-> bio_endio
-> f2fs_dio_read_end_io
-> f2fs_update_iostat
-> spin_lock_irqsave(sbi->iostat_lock) ===> Dead lock here
Fixes:
61803e984307 ("f2fs: fix iostat related lock protection")
Fixes:
a1e09b03e6f5 ("f2fs: use iomap for direct I/O")
Signed-off-by: Qilin Tan <qilin.tan@mediatek.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Armin Wolf [Thu, 30 Mar 2023 21:56:37 +0000 (23:56 +0200)]
wifi: rt2x00: Fix memory leak when handling surveys
[ Upstream commit
cbef9a83c51dfcb07f77cfa6ac26f53a1ea86f49 ]
When removing a rt2x00 device, its associated channel surveys
are not freed, causing a memory leak observable with kmemleak:
unreferenced object 0xffff9620f0881a00 (size 512):
comm "systemd-udevd", pid 2290, jiffies
4294906974 (age 33.768s)
hex dump (first 32 bytes):
70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD..............
00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................
backtrace:
[<
ffffffffb0ed858b>] __kmalloc+0x4b/0x130
[<
ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib]
[<
ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb]
[<
ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib]
[<
ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb]
[<
ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore]
[<
ffffffffb13be2d5>] really_probe+0x1a5/0x410
[<
ffffffffb13be5c8>] __driver_probe_device+0x78/0x180
[<
ffffffffb13be6fe>] driver_probe_device+0x1e/0x90
[<
ffffffffb13be972>] __driver_attach+0xd2/0x1c0
[<
ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0
[<
ffffffffb13bd2a2>] bus_add_driver+0x112/0x210
[<
ffffffffb13bfc6c>] driver_register+0x5c/0x120
[<
ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore]
[<
ffffffffb0c011c4>] do_one_initcall+0x44/0x220
[<
ffffffffb0d6134c>] do_init_module+0x4c/0x220
Fix this by freeing the channel surveys on device removal.
Tested with a RT3070 based USB wireless adapter.
Fixes:
5447626910f5 ("rt2x00: save survey for every channel visited")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330215637.4332-1-W_Armin@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xingui Yang [Mon, 20 Mar 2023 03:34:23 +0000 (11:34 +0800)]
scsi: hisi_sas: Handle NCQ error when IPTT is valid
[ Upstream commit
bb544224da77b96b2c11a13872bf91ede1e015be ]
If an NCQ error occurs when the IPTT is valid and slot->abort flag is set
in completion path, sas_task_abort() will be called to abort only one NCQ
command now, and the host would be set to SHOST_RECOVERY state. But this
may not kick-off EH Immediately until other outstanding QCs timeouts. As a
result, the host may remain in the SHOST_RECOVERY state for up to 30
seconds, such as follows:
[7972317.645234] hisi_sas_v3_hw 0000:74:04.0: erroneous completion iptt=3264 task=
00000000466116b8 dev id=2 sas_addr=0x5000000000000502 CQ hdr: 0x1883 0x20cc0 0x40000 0x20420000 Error info: 0x0 0x0 0x200000 0x0
[7972341.508264] sas: Enter sas_scsi_recover_host busy: 32 failed: 32
[7972341.984731] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 32 tries: 1
All NCQ commands that are in the queue should be aborted when an NCQ error
occurs in this scenario.
Fixes:
05d91b557af9 ("scsi: hisi_sas: Directly trigger SCSI error handling for completion errors")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Garry [Mon, 17 Oct 2022 09:20:28 +0000 (17:20 +0800)]
scsi: libsas: Add sas_ata_device_link_abort()
[ Upstream commit
44112922674b94a7d699dfff6307fc830018df7c ]
Similar to how AHCI handles NCQ errors in ahci_error_intr() ->
ata_port_abort() -> ata_do_link_abort(), add an NCQ error handler for LLDDs
to call to initiate a link abort.
This will mark all outstanding QCs as failed and kick-off EH.
Note:
A "force reset" argument is added for drivers which require the ATA error
handling to always reset the device.
A driver may require this feature for when SATA device per-SCSI cmnd
resources are only released during reset for ATA EH. As such, we need an
option to force reset to be done, regardless of what any EH autopsy
decides.
The SATA device FIS fields are set to indicate a device error from
ata_eh_analyze_tf().
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-2-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of:
bb544224da77 ("scsi: hisi_sas: Handle NCQ error when IPTT is valid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Chen [Sun, 26 Mar 2023 05:42:17 +0000 (05:42 +0000)]
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg()
[ Upstream commit
5dbe1f8eb8c5ac69394400a5b86fd81775e96c43 ]
If there is a failure during copy_from_user or user-provided data buffer is
invalid, rtl_debugfs_set_write_reg should return negative error code instead
of a positive value count.
Fix this bug by returning correct error code. Moreover, the check of buffer
against null is removed since it will be handled by copy_from_user.
Fixes:
610247f46feb ("rtlwifi: Improve debugging by using debugfs")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230326054217.93492-1-harperchen1110@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Chen [Sun, 26 Mar 2023 05:31:38 +0000 (05:31 +0000)]
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()
[ Upstream commit
905a9241e4e8c15d2c084fee916280514848fe35 ]
If there is a failure during copy_from_user or user-provided data buffer
is invalid, rtl_debugfs_set_write_rfreg should return negative error code
instead of a positive value count.
Fix this bug by returning correct error code. Moreover, the check of buffer
against null is removed since it will be handled by copy_from_user.
Fixes:
610247f46feb ("rtlwifi: Improve debugging by using debugfs")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230326053138.91338-1-harperchen1110@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suman Anna [Fri, 24 Mar 2023 14:58:12 +0000 (20:28 +0530)]
crypto: sa2ul - Select CRYPTO_DES
[ Upstream commit
8832023efd20966e29944dac92118dfbf1fa1bc0 ]
The SA2UL Crypto driver provides support for couple of
DES3 algos "cbc(des3_ede)" and "ecb(des3_ede)", and enabling
the crypto selftest throws the following errors (as seen on
K3 J721E SoCs):
saul-crypto 4e00000.crypto: Error allocating fallback algo cbc(des3_ede)
alg: skcipher: failed to allocate transform for cbc-des3-sa2ul: -2
saul-crypto 4e00000.crypto: Error allocating fallback algo ecb(des3_ede)
alg: skcipher: failed to allocate transform for ecb-des3-sa2ul: -2
Fix this by selecting CRYPTO_DES which was missed while
adding base driver support.
Fixes:
7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Tue, 21 Mar 2023 06:59:30 +0000 (07:59 +0100)]
crypto: caam - Clear some memory in instantiate_rng
[ Upstream commit
9c19fb86a8cb2ee82a832c95e139f29ea05c4d08 ]
According to the comment at the end of the 'for' loop just a few lines
below, it looks needed to clear 'desc'.
So it should also be cleared for the first iteration.
Move the memset() to the beginning of the loop to be safe.
Fixes:
281922a1d4f5 ("crypto: caam - add support for SEC v5.x RNG4")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaegeuk Kim [Thu, 23 Mar 2023 22:37:54 +0000 (15:37 -0700)]
f2fs: fix scheduling while atomic in decompression path
[ Upstream commit
1aa161e43106d46ca8e9a86f4aa28d420258134b ]
[ 16.945668][ C0] Call trace:
[ 16.945678][ C0] dump_backtrace+0x110/0x204
[ 16.945706][ C0] dump_stack_lvl+0x84/0xbc
[ 16.945735][ C0] __schedule_bug+0xb8/0x1ac
[ 16.945756][ C0] __schedule+0x724/0xbdc
[ 16.945778][ C0] schedule+0x154/0x258
[ 16.945793][ C0] bit_wait_io+0x48/0xa4
[ 16.945808][ C0] out_of_line_wait_on_bit+0x114/0x198
[ 16.945824][ C0] __sync_dirty_buffer+0x1f8/0x2e8
[ 16.945853][ C0] __f2fs_commit_super+0x140/0x1f4
[ 16.945881][ C0] f2fs_commit_super+0x110/0x28c
[ 16.945898][ C0] f2fs_handle_error+0x1f4/0x2f4
[ 16.945917][ C0] f2fs_decompress_cluster+0xc4/0x450
[ 16.945942][ C0] f2fs_end_read_compressed_page+0xc0/0xfc
[ 16.945959][ C0] f2fs_handle_step_decompress+0x118/0x1cc
[ 16.945978][ C0] f2fs_read_end_io+0x168/0x2b0
[ 16.945993][ C0] bio_endio+0x25c/0x2c8
[ 16.946015][ C0] dm_io_dec_pending+0x3e8/0x57c
[ 16.946052][ C0] clone_endio+0x134/0x254
[ 16.946069][ C0] bio_endio+0x25c/0x2c8
[ 16.946084][ C0] blk_update_request+0x1d4/0x478
[ 16.946103][ C0] scsi_end_request+0x38/0x4cc
[ 16.946129][ C0] scsi_io_completion+0x94/0x184
[ 16.946147][ C0] scsi_finish_command+0xe8/0x154
[ 16.946164][ C0] scsi_complete+0x90/0x1d8
[ 16.946181][ C0] blk_done_softirq+0xa4/0x11c
[ 16.946198][ C0] _stext+0x184/0x614
[ 16.946214][ C0] __irq_exit_rcu+0x78/0x144
[ 16.946234][ C0] handle_domain_irq+0xd4/0x154
[ 16.946260][ C0] gic_handle_irq.33881+0x5c/0x27c
[ 16.946281][ C0] call_on_irq_stack+0x40/0x70
[ 16.946298][ C0] do_interrupt_handler+0x48/0xa4
[ 16.946313][ C0] el1_interrupt+0x38/0x68
[ 16.946346][ C0] el1h_64_irq_handler+0x20/0x30
[ 16.946362][ C0] el1h_64_irq+0x78/0x7c
[ 16.946377][ C0] finish_task_switch+0xc8/0x3d8
[ 16.946394][ C0] __schedule+0x600/0xbdc
[ 16.946408][ C0] preempt_schedule_common+0x34/0x5c
[ 16.946423][ C0] preempt_schedule+0x44/0x48
[ 16.946438][ C0] process_one_work+0x30c/0x550
[ 16.946456][ C0] worker_thread+0x414/0x8bc
[ 16.946472][ C0] kthread+0x16c/0x1e0
[ 16.946486][ C0] ret_from_fork+0x10/0x20
Fixes:
bff139b49d9f ("f2fs: handle decompress only post processing in softirq")
Fixes:
95fa90c9e5a7 ("f2fs: support recording errors into superblock")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Mon, 20 Mar 2023 17:22:18 +0000 (01:22 +0800)]
f2fs: compress: fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages()
[ Upstream commit
babedcbac164cec970872b8097401ca913a80e61 ]
BUG_ON() will be triggered when writing files concurrently,
because the same page is writtenback multiple times.
1597 void folio_end_writeback(struct folio *folio)
1598 {
......
1618 if (!__folio_end_writeback(folio))
1619 BUG();
......
1625 }
kernel BUG at mm/filemap.c:1619!
Call Trace:
<TASK>
f2fs_write_end_io+0x1a0/0x370
blk_update_request+0x6c/0x410
blk_mq_end_request+0x15/0x130
blk_complete_reqs+0x3c/0x50
__do_softirq+0xb8/0x29b
? sort_range+0x20/0x20
run_ksoftirqd+0x19/0x20
smpboot_thread_fn+0x10b/0x1d0
kthread+0xde/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Below is the concurrency scenario:
[Process A] [Process B] [Process C]
f2fs_write_raw_pages()
- redirty_page_for_writepage()
- unlock page()
f2fs_do_write_data_page()
- lock_page()
- clear_page_dirty_for_io()
- set_page_writeback() [1st writeback]
.....
- unlock page()
generic_perform_write()
- f2fs_write_begin()
- wait_for_stable_page()
- f2fs_write_end()
- set_page_dirty()
- lock_page()
- f2fs_do_write_data_page()
- set_page_writeback() [2st writeback]
This problem was introduced by the previous commit
7377e853967b ("f2fs:
compress: fix potential deadlock of compress file"). All pagelocks were
released in f2fs_write_raw_pages(), but whether the page was
in the writeback state was ignored in the subsequent writing process.
Let's fix it by waiting for the page to writeback before writing.
Cc: Christoph Hellwig <hch@lst.de>
Fixes:
4c8ff7095bef ("f2fs: support data compression")
Fixes:
7377e853967b ("f2fs: compress: fix potential deadlock of compress file")
Signed-off-by: Qi Han <hanqi@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaegeuk Kim [Tue, 21 Mar 2023 22:58:04 +0000 (15:58 -0700)]
f2fs: apply zone capacity to all zone type
[ Upstream commit
0b37ed21e3367539b79284e0b0af2246ffcf0dca ]
If we manage the zone capacity per zone type, it'll break the GC assumption.
And, the current logic complains valid block count mismatch.
Let's apply zone capacity to all zone type, if specified.
Fixes:
de881df97768 ("f2fs: support zone capacity less than zone size")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonggil Song [Thu, 16 Feb 2023 07:13:50 +0000 (16:13 +0900)]
f2fs: fix uninitialized skipped_gc_rwsem
[ Upstream commit
c17caf0ba3aa3411b96c71b4ce24be1040b8f3e8 ]
When f2fs skipped a gc round during victim migration, there was a bug which
would skip all upcoming gc rounds unconditionally because skipped_gc_rwsem
was not initialized. It fixes the bug by correctly initializing the
skipped_gc_rwsem inside the gc loop.
Fixes:
6f8d4455060d ("f2fs: avoid fi->i_gc_rwsem[WRITE] lock in f2fs_gc")
Signed-off-by: Yonggil Song <yonggil.song@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Tue, 21 Feb 2023 14:45:50 +0000 (22:45 +0800)]
f2fs: handle dqget error in f2fs_transfer_project_quota()
[ Upstream commit
8051692f5f23260215bfe9a72e712d93606acc5f ]
We should set the error code when dqget() failed.
Fixes:
2c1d03056991 ("f2fs: support F2FS_IOC_FS{GET,SET}XATTR")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Anderson [Fri, 24 Mar 2023 17:51:27 +0000 (13:51 -0400)]
net: sunhme: Fix uninitialized return code
[ Upstream commit
d61157414d0a591d10d27d0ce5873916614e5e31 ]
Fix an uninitialized return code if we never found a qfe slot. It would be
a bug if we ever got into this situation, but it's good to return something
tracable.
Fixes:
acb3f35f920b ("sunhme: forward the error code from pci_enable_device()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Danila Chernetsov [Fri, 17 Mar 2023 17:51:09 +0000 (17:51 +0000)]
scsi: megaraid: Fix mega_cmd_done() CMDID_INT_CMDS
[ Upstream commit
75cb113cd43f06aaf4f1bda0069cfd5b98e909eb ]
When cmdid == CMDID_INT_CMDS, the 'cmds' pointer is NULL but is
dereferenced below.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
0f2bb84d2a68 ("[SCSI] megaraid: simplify internal command handling")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Link: https://lore.kernel.org/r/20230317175109.18585-1-listdansp@mail.ru
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Sun, 19 Mar 2023 01:56:19 +0000 (20:56 -0500)]
scsi: target: iscsit: Fix TAS handling during conn cleanup
[ Upstream commit
cc79da306ebb2edb700c3816b90219223182ac3c ]
Fix a bug added in commit
f36199355c64 ("scsi: target: iscsi: Fix cmd abort
fabric stop race").
If CMD_T_TAS is set on the se_cmd we must call iscsit_free_cmd() to do the
last put on the cmd and free it, because the connection is down and we will
not up sending the response and doing the put from the normal I/O
path.
Add a check for CMD_T_TAS in iscsit_release_commands_from_conn() so we now
detect this case and run iscsit_free_cmd().
Fixes:
f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-9-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Sun, 19 Mar 2023 01:56:18 +0000 (20:56 -0500)]
scsi: target: Fix multiple LUN_RESET handling
[ Upstream commit
673db054d7a2b5a470d7a25baf65956d005ad729 ]
This fixes a bug where an initiator thinks a LUN_RESET has cleaned up
running commands when it hasn't. The bug was added in commit
51ec502a3266
("target: Delete tmr from list before processing").
The problem occurs when:
1. We have N I/O cmds running in the target layer spread over 2 sessions.
2. The initiator sends a LUN_RESET for each session.
3. session1's LUN_RESET loops over all the running commands from both
sessions and moves them to its local drain_task_list.
4. session2's LUN_RESET does not see the LUN_RESET from session1 because
the commit above has it remove itself. session2 also does not see any
commands since the other reset moved them off the state lists.
5. sessions2's LUN_RESET will then complete with a successful response.
6. sessions2's inititor believes the running commands on its session are
now cleaned up due to the successful response and cleans up the running
commands from its side. It then restarts them.
7. The commands do eventually complete on the backend and the target
starts to return aborted task statuses for them. The initiator will
either throw a invalid ITT error or might accidentally lookup a new
task if the ITT has been reallocated already.
Fix the bug by reverting the patch, and serialize the execution of
LUN_RESETs and Preempt and Aborts.
Also prevent us from waiting on LUN_RESETs in core_tmr_drain_tmr_list,
because it turns out the original patch fixed a bug that was not
mentioned. For LUN_RESET1 core_tmr_drain_tmr_list can see a second
LUN_RESET and wait on it. Then the second reset will run
core_tmr_drain_tmr_list and see the first reset and wait on it resulting in
a deadlock.
Fixes:
51ec502a3266 ("target: Delete tmr from list before processing")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-8-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Sun, 19 Mar 2023 01:56:16 +0000 (20:56 -0500)]
scsi: target: iscsit: Stop/wait on cmds during conn close
[ Upstream commit
395cee83d02de3073211b04fc85724f4abc663ad ]
This fixes a bug added in commit
f36199355c64 ("scsi: target: iscsi: Fix
cmd abort fabric stop race").
If we have multiple sessions to the same se_device we can hit a race where
a LUN_RESET on one session cleans up the se_cmds from under another
session which is being closed. This results in the closing session freeing
its conn/session structs while they are still in use.
The bug is:
1. Session1 has IO se_cmd1.
2. Session2 can also have se_cmds for I/O and optionally TMRs for ABORTS
but then gets a LUN_RESET.
3. The LUN_RESET on session2 sees the se_cmds on session1 and during the
drain stages marks them all with CMD_T_ABORTED.
4. session1 is now closed so iscsit_release_commands_from_conn() only sees
se_cmds with the CMD_T_ABORTED bit set and returns immediately even
though we have outstanding commands.
5. session1's connection and session are freed.
6. The backend request for se_cmd1 completes and it accesses the freed
connection/session.
This hooks the iscsit layer into the cmd counter code, so we can wait for
all outstanding se_cmds before freeing the connection.
Fixes:
f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-6-michael.christie@oracle.com
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Sun, 19 Mar 2023 01:56:15 +0000 (20:56 -0500)]
scsi: target: iscsit: isert: Alloc per conn cmd counter
[ Upstream commit
6d256bee602b131bd4fbc92863b6a1210bcf6325 ]
This has iscsit allocate a per conn cmd counter and converts iscsit/isert
to use it instead of the per session one.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-5-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of:
395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Sun, 19 Mar 2023 01:56:14 +0000 (20:56 -0500)]
scsi: target: Pass in cmd counter to use during cmd setup
[ Upstream commit
8e288be8606ad87c1726618eacfb8fbd3ab4b806 ]
Allow target_get_sess_cmd() users to pass in the cmd counter they want to
use. Right now we pass in the session's cmd counter but in a subsequent
commit iSCSI will switch from per session to per conn.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-4-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of:
395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Sun, 19 Mar 2023 01:56:13 +0000 (20:56 -0500)]
scsi: target: Move cmd counter allocation
[ Upstream commit
4edba7e4a8f39112398d3cda94128a8e13a7d527 ]
iSCSI needs to allocate its cmd counter per connection for MCS support
where we need to stop and wait on commands running on a connection instead
of per session. This moves the cmd counter allocation to
target_setup_session() which is used by drivers that need the stop+wait
behavior per session.
xcopy doesn't need stop+wait at all, so we will be OK moving the cmd
counter allocation outside of transport_init_session().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of:
395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Sun, 19 Mar 2023 01:56:12 +0000 (20:56 -0500)]
scsi: target: Move sess cmd counter to new struct
[ Upstream commit
becd9be6069e7b183c084f460f0eb363e43cc487 ]
iSCSI needs to wait on outstanding commands like how SRP and the FC/FCoE
drivers do. It can't use target_stop_session() because for MCS support we
can't stop the entire session during recovery because if other connections
are OK then we want to be able to continue to execute I/O on them.
Move the per session cmd counters to a new struct so iSCSI can allocate
them per connection. The xcopy code can also just not allocate in the
future since it doesn't need to track commands.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-2-michael.christie@oracle.com
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of:
395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anastasia Kovaleva [Mon, 14 Nov 2022 10:25:00 +0000 (13:25 +0300)]
scsi: target: core: Change the way target_xcopy_do_work() sets restiction on max I/O
[ Upstream commit
689d94ec208cfdf95101d99319cb4bdc5f55774d ]
To determine how many blocks sends in one command, the minimum value is
selected from the hw_max_sectors of both devices. In target_xcopy_do_work,
hw_max_sectors are used as blocks, not sectors; it also ignores the fact
that sectors can be of different sizes, for example 512 and 4096
bytes. Because of this, a number of blocks can be transmitted that the
device will not be able to accept.
Change the selection of max transmission size into bytes.
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Link: https://lore.kernel.org/r/20221114102500.88892-4-a.kovaleva@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of:
395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Borkmann [Wed, 22 Mar 2023 21:30:55 +0000 (22:30 +0100)]
bpf: Fix __reg_bound_offset 64->32 var_off subreg propagation
[ Upstream commit
7be14c1c9030f73cc18b4ff23b78a0a081f16188 ]
Xu reports that after commit
3f50f132d840 ("bpf: Verifier, do explicit ALU32
bounds tracking"), the following BPF program is rejected by the verifier:
0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2
3: (07) r1 += 1
4: (2d) if r1 > r3 goto pc+8
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff))
6: (18) r0 = 0x7fffffffffffff10
8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f)
9: (18) r0 = 0x8000000000000000
11: (07) r0 += 1
12: (ad) if r0 < r1 goto pc-2
13: (b7) r0 = 0
14: (95) exit
And the verifier log says:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0)
4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0)
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0)
6: (18) r0 = 0x7fffffffffffff10 ; R0_w=
9223372036854775568
8: (0f) r1 += r0 ; R0_w=
9223372036854775568 R1_w=scalar(umin=
9223372036854775568,umax=
9223372036854775823,s32_min=-240,s32_max=15)
9: (18) r0 = 0x8000000000000000 ; R0_w=-
9223372036854775808
11: (07) r0 += 1 ; R0_w=-
9223372036854775807
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775807 R1_w=scalar(umin=
9223372036854775568,umax=
9223372036854775809)
13: (b7) r0 = 0 ; R0_w=0
14: (95) exit
from 12 to 11: R0_w=-
9223372036854775807 R1_w=scalar(umin=
9223372036854775810,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775806
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775806 R1_w=scalar(umin=
9223372036854775810,umax=
9223372036854775810,var_off=(0x8000000000000000; 0xffffffff))
13: safe
[...]
from 12 to 11: R0_w=-
9223372036854775795 R1=scalar(umin=
9223372036854775822,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775794
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775794 R1=scalar(umin=
9223372036854775822,umax=
9223372036854775822,var_off=(0x8000000000000000; 0xffffffff))
13: safe
from 12 to 11: R0_w=-
9223372036854775794 R1=scalar(umin=
9223372036854775823,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775793
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775793 R1=scalar(umin=
9223372036854775823,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff))
13: safe
from 12 to 11: R0_w=-
9223372036854775793 R1=scalar(umin=
9223372036854775824,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775792
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775792 R1=scalar(umin=
9223372036854775824,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xffffffff))
13: safe
[...]
The 64bit umin=
9223372036854775810 bound continuously bumps by +1 while
umax=
9223372036854775823 stays as-is until the verifier complexity limit
is reached and the program gets finally rejected. During this simulation,
the umin also eventually surpasses umax. Looking at the first 'from 12
to 11' output line from the loop, R1 has the following state:
R1_w=scalar(umin=0x8000000000000002 (
9223372036854775810),
umax=0x800000000000000f (
9223372036854775823),
var_off=(0x8000000000000000;
0xffffffff))
The var_off has technically not an inconsistent state but it's very
imprecise and far off surpassing 64bit umax bounds whereas the expected
output with refined known bits in var_off should have been like:
R1_w=scalar(umin=0x8000000000000002 (
9223372036854775810),
umax=0x800000000000000f (
9223372036854775823),
var_off=(0x8000000000000000;
0xf))
In the above log, var_off stays as var_off=(0x8000000000000000; 0xffffffff)
and does not converge into a narrower mask where more bits become known,
eventually transforming R1 into a constant upon umin=
9223372036854775823,
umax=
9223372036854775823 case where the verifier would have terminated and
let the program pass.
The __reg_combine_64_into_32() marks the subregister unknown and propagates
64bit {s,u}min/{s,u}max bounds to their 32bit equivalents iff they are within
the 32bit universe. The question came up whether __reg_combine_64_into_32()
should special case the situation that when 64bit {s,u}min bounds have
the same value as 64bit {s,u}max bounds to then assign the latter as
well to the 32bit reg->{s,u}32_{min,max}_value. As can be seen from the
above example however, that is just /one/ special case and not a /generic/
solution given above example would still not be addressed this way and
remain at an imprecise var_off=(0x8000000000000000; 0xffffffff).
The improvement is needed in __reg_bound_offset() to refine var32_off with
the updated var64_off instead of the prior reg->var_off. The reg_bounds_sync()
code first refines information about the register's min/max bounds via
__update_reg_bounds() from the current var_off, then in __reg_deduce_bounds()
from sign bit and with the potentially learned bits from bounds it'll
update the var_off tnum in __reg_bound_offset(). For example, intersecting
with the old var_off might have improved bounds slightly, e.g. if umax
was 0x7f...f and var_off was (0; 0xf...fc), then new var_off will then
result in (0; 0x7f...fc). The intersected var64_off holds then the
universe which is a superset of var32_off. The point for the latter is
not to broaden, but to further refine known bits based on the intersection
of var_off with 32 bit bounds, so that we later construct the final var_off
from upper and lower 32 bits. The final __update_reg_bounds() can then
potentially still slightly refine bounds if more bits became known from the
new var_off.
After the improvement, we can see R1 converging successively:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0)
4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0)
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0)
6: (18) r0 = 0x7fffffffffffff10 ; R0_w=
9223372036854775568
8: (0f) r1 += r0 ; R0_w=
9223372036854775568 R1_w=scalar(umin=
9223372036854775568,umax=
9223372036854775823,s32_min=-240,s32_max=15)
9: (18) r0 = 0x8000000000000000 ; R0_w=-
9223372036854775808
11: (07) r0 += 1 ; R0_w=-
9223372036854775807
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775807 R1_w=scalar(umin=
9223372036854775568,umax=
9223372036854775809)
13: (b7) r0 = 0 ; R0_w=0
14: (95) exit
from 12 to 11: R0_w=-
9223372036854775807 R1_w=scalar(umin=
9223372036854775810,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775806
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775806 R1_w=-
9223372036854775806
13: safe
from 12 to 11: R0_w=-
9223372036854775806 R1_w=scalar(umin=
9223372036854775811,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775805
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775805 R1_w=-
9223372036854775805
13: safe
[...]
from 12 to 11: R0_w=-
9223372036854775798 R1=scalar(umin=
9223372036854775819,umax=
9223372036854775823,var_off=(0x8000000000000008; 0x7),s32_min=8,s32_max=15,u32_min=8,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775797
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775797 R1=-
9223372036854775797
13: safe
from 12 to 11: R0_w=-
9223372036854775797 R1=scalar(umin=
9223372036854775820,umax=
9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775796
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775796 R1=-
9223372036854775796
13: safe
from 12 to 11: R0_w=-
9223372036854775796 R1=scalar(umin=
9223372036854775821,umax=
9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775795
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775795 R1=-
9223372036854775795
13: safe
from 12 to 11: R0_w=-
9223372036854775795 R1=scalar(umin=
9223372036854775822,umax=
9223372036854775823,var_off=(0x800000000000000e; 0x1),s32_min=14,s32_max=15,u32_min=14,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775794
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-
9223372036854775794 R1=-
9223372036854775794
13: safe
from 12 to 11: R0_w=-
9223372036854775794 R1=-
9223372036854775793 R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-
9223372036854775793
12: (ad) if r0 < r1 goto pc-2
last_idx 12 first_idx 12
parent didn't have regs=1 stack=0 marks: R0_rw=P-
9223372036854775801 R1_r=scalar(umin=
9223372036854775815,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
last_idx 11 first_idx 11
regs=1 stack=0 before 11: (07) r0 += 1
parent didn't have regs=1 stack=0 marks: R0_rw=P-
9223372036854775805 R1_rw=scalar(umin=
9223372036854775812,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
last_idx 12 first_idx 0
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 9: (18) r0 = 0x8000000000000000
last_idx 12 first_idx 12
parent didn't have regs=2 stack=0 marks: R0_rw=P-
9223372036854775801 R1_r=Pscalar(umin=
9223372036854775815,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
last_idx 11 first_idx 11
regs=2 stack=0 before 11: (07) r0 += 1
parent didn't have regs=2 stack=0 marks: R0_rw=P-
9223372036854775805 R1_rw=Pscalar(umin=
9223372036854775812,umax=
9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
last_idx 12 first_idx 0
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 9: (18) r0 = 0x8000000000000000
regs=2 stack=0 before 8: (0f) r1 += r0
regs=3 stack=0 before 6: (18) r0 = 0x7fffffffffffff10
regs=2 stack=0 before 5: (71) r1 = *(u8 *)(r2 +0)
13: safe
from 4 to 13: safe
verification time 322 usec
stack depth 0
processed 56 insns (limit 1000000) max_states_per_insn 1 total_states 3 peak_states 3 mark_read 1
This also fixes up a test case along with this improvement where we match
on the verifier log. The updated log now has a refined var_off, too.
Fixes:
3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Xu Kuohai <xukuohai@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230314203424.4015351-2-xukuohai@huaweicloud.com
Link: https://lore.kernel.org/bpf/20230322213056.2470-1-daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Madhu Koriginja [Tue, 21 Mar 2023 15:58:44 +0000 (21:28 +0530)]
netfilter: keep conntrack reference until IPsecv6 policy checks are done
[ Upstream commit
b0e214d212030fe497d4d150bb3474e50ad5d093 ]
Keep the conntrack reference until policy checks have been performed for
IPsec V6 NAT support, just like ipv4.
The reference needs to be dropped before a packet is
queued to avoid having the conntrack module unloadable.
Fixes:
58a317f1061c ("netfilter: ipv6: add IPv6 NAT support")
Signed-off-by: Madhu Koriginja <madhu.koriginja@nxp.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King (Oracle) [Sun, 19 Mar 2023 12:33:29 +0000 (12:33 +0000)]
net: dsa: qca8k: remove assignment of an_enabled in pcs_get_state()
[ Upstream commit
9ef70d0130f282638b28cfce24222f71ada00c9c ]
pcs_get_state() implementations are not supposed to alter an_enabled.
Remove this assignment.
Fixes:
b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1pdsE5-00Dl2l-8F@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexei Starovoitov [Sun, 19 Mar 2023 20:30:13 +0000 (13:30 -0700)]
libbpf: Fix ld_imm64 copy logic for ksym in light skeleton.
[ Upstream commit
a506d6ce1dd184051037dc9d26c3eb187c9fe625 ]
Unlike normal libbpf the light skeleton 'loader' program is doing
btf_find_by_name_kind() call at run-time to find ksym in the kernel and
populate its {btf_id, btf_obj_fd} pair in ld_imm64 insn. To avoid doing the
search multiple times for the same ksym it remembers the first patched ld_imm64
insn and copies {btf_id, btf_obj_fd} from it into subsequent ld_imm64 insn.
Fix a bug in copying logic, since it may incorrectly clear BPF_PSEUDO_BTF_ID flag.
Also replace always true if (btf_obj_fd >= 0) check with unconditional JMP_JA
to clarify the code.
Fixes:
d995816b77eb ("libbpf: Avoid reload of imm for weak, unresolved, repeating ksym")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230319203014.55866-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 16 Mar 2023 01:10:08 +0000 (01:10 +0000)]
net/packet: convert po->auxdata to an atomic flag
[ Upstream commit
fd53c297aa7b077ae98a3d3d2d3aa278a1686ba6 ]
po->auxdata can be read while another thread
is changing its value, potentially raising KCSAN splat.
Convert it to PACKET_SOCK_AUXDATA flag.
Fixes:
8dc419447415 ("[PACKET]: Add optional checksum computation for recvmsg")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 16 Mar 2023 01:10:07 +0000 (01:10 +0000)]
net/packet: convert po->origdev to an atomic flag
[ Upstream commit
ee5675ecdf7a4e713ed21d98a70c2871d6ebed01 ]
syzbot/KCAN reported that po->origdev can be read
while another thread is changing its value.
We can avoid this splat by converting this field
to an actual bit.
Following patches will convert remaining 1bit fields.
Fixes:
80feaacb8a64 ("[AF_PACKET]: Add option to return orig_dev to userspace.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 16 Mar 2023 01:10:06 +0000 (01:10 +0000)]
net/packet: annotate accesses to po->xmit
[ Upstream commit
b9d83ab8a708f23a4001d60e9d8d0b3be3d9f607 ]
po->xmit can be set from setsockopt(PACKET_QDISC_BYPASS),
while read locklessly.
Use READ_ONCE()/WRITE_ONCE() to avoid potential load/store
tearing issues.
Fixes:
d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vadim Fedorenko [Wed, 15 Mar 2023 15:33:02 +0000 (08:33 -0700)]
vlan: partially enable SIOCSHWTSTAMP in container
[ Upstream commit
731b73dba359e3ff00517c13aa0daa82b34ff466 ]
Setting timestamp filter was explicitly disabled on vlan devices in
containers because it might affect other processes on the host. But it's
absolutely legit in case when real device is in the same namespace.
Fixes:
873017af7784 ("vlan: disable SIOCSHWTSTAMP in container")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King (Oracle) [Wed, 15 Mar 2023 14:46:43 +0000 (14:46 +0000)]
net: pcs: xpcs: remove double-read of link state when using AN
[ Upstream commit
ef63461caf427a77a04620d74ba90035a712af9c ]
Phylink does not want the current state of the link when reading the
PCS link state - it wants the latched state. Don't double-read the
MII status register. Phylink will re-read as necessary to capture
transient link-down events as of
dbae3388ea9c ("net: phylink: Force
retrigger in case of latched link-fail indicator").
The above referenced commit is a dependency for this change, and thus
this change should not be backported to any kernel that does not
contain the above referenced commit.
Fixes:
fcb26bd2b6ca ("net: phy: Add Synopsys DesignWare XPCS MDIO module")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luis Gerhorst [Wed, 15 Mar 2023 16:54:00 +0000 (17:54 +0100)]
bpf: Remove misleading spec_v1 check on var-offset stack read
[ Upstream commit
082cdc69a4651dd2a77539d69416a359ed1214f5 ]
For every BPF_ADD/SUB involving a pointer, adjust_ptr_min_max_vals()
ensures that the resulting pointer has a constant offset if
bypass_spec_v1 is false. This is ensured by calling sanitize_check_bounds()
which in turn calls check_stack_access_for_ptr_arithmetic(). There,
-EACCESS is returned if the register's offset is not constant, thereby
rejecting the program.
In summary, an unprivileged user must never be able to create stack
pointers with a variable offset. That is also the case, because a
respective check in check_stack_write() is missing. If they were able
to create a variable-offset pointer, users could still use it in a
stack-write operation to trigger unsafe speculative behavior [1].
Because unprivileged users must already be prevented from creating
variable-offset stack pointers, viable options are to either remove
this check (replacing it with a clarifying comment), or to turn it
into a "verifier BUG"-message, also adding a similar check in
check_stack_write() (for consistency, as a second-level defense).
This patch implements the first option to reduce verifier bloat.
This check was introduced by commit
01f810ace9ed ("bpf: Allow
variable-offset stack access") which correctly notes that
"variable-offset reads and writes are disallowed (they were already
disallowed for the indirect access case) because the speculative
execution checking code doesn't support them". However, it does not
further discuss why the check in check_stack_read() is necessary.
The code which made this check obsolete was also introduced in this
commit.
I have compiled ~650 programs from the Linux selftests, Linux samples,
Cilium, and libbpf/examples projects and confirmed that none of these
trigger the check in check_stack_read() [2]. Instead, all of these
programs are, as expected, already rejected when constructing the
variable-offset pointers. Note that the check in
check_stack_access_for_ptr_arithmetic() also prints "off=%d" while the
code removed by this patch does not (the error removed does not appear
in the "verification_error" values). For reproducibility, the
repository linked includes the raw data and scripts used to create
the plot.
[1] https://arxiv.org/pdf/1807.03757.pdf
[2] https://gitlab.cs.fau.de/un65esoq/bpf-spectre/-/raw/
53dc19fcf459c186613b1156a81504b39c8d49db/data/plots/23-02-26_23-56_bpftool/bpftool/0004-errors.pdf?inline=false
Fixes:
01f810ace9ed ("bpf: Allow variable-offset stack access")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230315165358.23701-1-gerhorst@cs.fau.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin KaFai Lau [Thu, 16 Mar 2023 00:07:26 +0000 (17:07 -0700)]
selftests/bpf: Fix a fd leak in an error path in network_helpers.c
[ Upstream commit
226efec2b0efad60d4a6c4b2c3a8710dafc4dc21 ]
In __start_server, it leaks a fd when setsockopt(SO_REUSEPORT) fails.
This patch fixes it.
Fixes:
eed92afdd14c ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230316000726.1016773-2-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Kumar Singh [Thu, 9 Mar 2023 09:53:08 +0000 (15:23 +0530)]
wifi: ath11k: fix deinitialization of firmware resources
[ Upstream commit
5a78ac33e3cb8822da64dd1af196e83664b332b0 ]
Currently, in ath11k_ahb_fw_resources_init(), iommu domain
mapping is done only for the chipsets having fixed firmware
memory. Also, for such chipsets, mapping is done only if it
does not have TrustZone support.
During deinitialization, only if TrustZone support is not there,
iommu is unmapped back. However, for non fixed firmware memory
chipsets, TrustZone support is not there and this makes the
condition check to true and it tries to unmap the memory which
was not mapped during initialization.
This leads to the following trace -
[ 83.198790] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000008
[ 83.259537] Modules linked in: ath11k_ahb ath11k qmi_helpers
.. snip ..
[ 83.280286] pstate:
20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 83.287228] pc : __iommu_unmap+0x30/0x140
[ 83.293907] lr : iommu_unmap+0x5c/0xa4
[ 83.298072] sp :
ffff80000b3abad0
.. snip ..
[ 83.369175] Call trace:
[ 83.376282] __iommu_unmap+0x30/0x140
[ 83.378541] iommu_unmap+0x5c/0xa4
[ 83.382360] ath11k_ahb_fw_resource_deinit.part.12+0x2c/0xac [ath11k_ahb]
[ 83.385666] ath11k_ahb_free_resources+0x140/0x17c [ath11k_ahb]
[ 83.392521] ath11k_ahb_shutdown+0x34/0x40 [ath11k_ahb]
[ 83.398248] platform_shutdown+0x20/0x2c
[ 83.403455] device_shutdown+0x16c/0x1c4
[ 83.407621] kernel_restart_prepare+0x34/0x3c
[ 83.411529] kernel_restart+0x14/0x74
[ 83.415781] __do_sys_reboot+0x1c4/0x22c
[ 83.419427] __arm64_sys_reboot+0x1c/0x24
[ 83.423420] invoke_syscall+0x44/0xfc
[ 83.427326] el0_svc_common.constprop.3+0xac/0xe8
[ 83.430974] do_el0_svc+0xa0/0xa8
[ 83.435659] el0_svc+0x1c/0x44
[ 83.438957] el0t_64_sync_handler+0x60/0x144
[ 83.441910] el0t_64_sync+0x15c/0x160
[ 83.446343] Code:
aa0103f4 f9400001 f90027a1 d2800001 (
f94006a0)
[ 83.449903] ---[ end trace
0000000000000000 ]---
This can be reproduced by probing an AHB chipset which is not
having a fixed memory region. During reboot (or rmmod) trace
can be seen.
Fix this issue by adding a condition check on firmware fixed memory
hw_param as done in the counter initialization function.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Fixes:
f9eec4947add ("ath11k: Add support for targets without trustzone")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230309095308.24937-1-quic_adisi@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Mikhalitsyn [Mon, 13 Mar 2023 11:32:11 +0000 (12:32 +0100)]
scm: fix MSG_CTRUNC setting condition for SO_PASSSEC
[ Upstream commit
a02d83f9947d8f71904eda4de046630c3eb6802c ]
Currently, kernel would set MSG_CTRUNC flag if msg_control buffer
wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS.
For some reason we have no corresponding check for SO_PASSSEC.
In the recvmsg(2) doc we have:
MSG_CTRUNC
indicates that some control data was discarded due to lack
of space in the buffer for ancillary data.
So, we need to set MSG_CTRUNC flag for all types of SCM.
This change can break applications those don't check MSG_CTRUNC flag.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
v2:
- commit message was rewritten according to Eric's suggestion
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shashank Gupta [Mon, 27 Feb 2023 20:55:42 +0000 (15:55 -0500)]
crypto: qat - fix concurrency issue when device state changes
[ Upstream commit
1bdc85550a2b59bb7f62ead7173134e66dd2d60e ]
The sysfs `state` attribute is not protected against race conditions.
If multiple processes perform a device state transition on the same
device in parallel, unexpected behaviors might occur.
For transitioning the device state, adf_sysfs.c calls the functions
adf_dev_init(), adf_dev_start(), adf_dev_stop() and adf_dev_shutdown()
which are unprotected and interdependent on each other. To perform a
state transition, these functions needs to be called in a specific
order:
* device up: adf_dev_init() -> adf_dev_start()
* device down: adf_dev_stop() -> adf_dev_shutdown()
This change introduces the functions adf_dev_up() and adf_dev_down()
which wrap the state machine functions and protect them with a
per-device lock. These are then used in adf_sysfs.c instead of the
individual state transition functions.
Fixes:
5ee52118ac14 ("crypto: qat - expose device state through sysfs for 4xxx")
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Mon, 13 Mar 2023 18:40:17 +0000 (11:40 -0700)]
bpf: fix precision propagation verbose logging
[ Upstream commit
34f0677e7afd3a292bc1aadda7ce8e35faedb204 ]
Fix wrong order of frame index vs register/slot index in precision
propagation verbose (level 2) output. It's wrong and very confusing as is.
Fixes:
529409ea92d5 ("bpf: propagate precision across all frames, not just the last one")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230313184017.4083374-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Thu, 9 Mar 2023 22:41:31 +0000 (14:41 -0800)]
bpf: take into account liveness when propagating precision
[ Upstream commit
52c2b005a3c18c565fc70cfd0ca49375f301e952 ]
When doing state comparison, if old state has register that is not
marked as REG_LIVE_READ, then we just skip comparison, regardless what's
the state of corresponing register in current state. This is because not
REG_LIVE_READ register is irrelevant for further program execution and
correctness. All good here.
But when we get to precision propagation, after two states were declared
equivalent, we don't take into account old register's liveness, and thus
attempt to propagate precision for register in current state even if
that register in old state was not REG_LIVE_READ anymore. This is bad,
because register in current state could be anything at all and this
could cause -EFAULT due to internal logic bugs.
Fix by taking into account REG_LIVE_READ liveness mark to keep the logic
in state comparison in sync with precision propagation.
Fixes:
a3ce685dd01a ("bpf: fix precision tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309224131.57449-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Sun, 26 Feb 2023 22:10:04 +0000 (23:10 +0100)]
wifi: rtw88: mac: Return the original error from rtw_mac_power_switch()
[ Upstream commit
15c8e267dfa62f207ee1db666c822324e3362b84 ]
rtw_mac_power_switch() calls rtw_pwr_seq_parser() which can return
-EINVAL, -EBUSY or 0. Propagate the original error code instead of
unconditionally returning -EINVAL in case of an error.
Fixes:
e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230226221004.138331-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Sun, 26 Feb 2023 22:10:03 +0000 (23:10 +0100)]
wifi: rtw88: mac: Return the original error from rtw_pwr_seq_parser()
[ Upstream commit
b7ed9fa2cb76ca7a3c3cd4a6d35748fe1fbda9f6 ]
rtw_pwr_seq_parser() calls rtw_sub_pwr_seq_parser() which can either
return -EBUSY, -EINVAL or 0. Propagate the original error code instead
of unconditionally returning -EBUSY in case of an error.
Fixes:
e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230226221004.138331-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luis Gerhorst [Mon, 27 Feb 2023 15:08:54 +0000 (16:08 +0100)]
tools: bpftool: Remove invalid \' json escape
[ Upstream commit
c679bbd611c08b0559ffae079330bc4e5574696a ]
RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange
Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid
two-character escape sequences. This does not include \', which is not
required in JSON because it exclusively uses double quotes as string
separators.
Solidus (/) may be escaped, but does not have to. Only reverse
solidus (\), double quotes ("), and the control characters have to be
escaped. Therefore, with this fix, bpftool correctly supports all valid
two-character escape sequences (but still does not support characters
that require multi-character escape sequences).
Witout this fix, attempting to load a JSON file generated by bpftool
using Python 3.10.6's default json.load() may fail with the error
"Invalid \escape" if the file contains the invalid escaped single
quote (\').
Fixes:
b66e907cfee2 ("tools: bpftool: copy JSON writer from iproute2 repository")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230227150853.16863-1-gerhorst@cs.fau.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fedor Pchelkin [Fri, 24 Feb 2023 10:28:05 +0000 (12:28 +0200)]
wifi: ath6kl: reduce WARN to dev_dbg() in callback
[ Upstream commit
75c4a8154cb6c7239fb55d5550f481f6765fb83c ]
The warn is triggered on a known race condition, documented in the code above
the test, that is correctly handled. Using WARN() hinders automated testing.
Reducing severity.
Fixes:
de2070fc4aa7 ("ath6kl: Fix kernel panic on continuous driver load/unload")
Reported-and-tested-by: syzbot+555908813b2ea35dae9a@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230126182431.867984-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Keeping [Tue, 24 Jan 2023 10:42:48 +0000 (10:42 +0000)]
wifi: brcmfmac: support CQM RSSI notification with older firmware
[ Upstream commit
ec52d77d077529f198fd874c550a26b9cc86a331 ]
Using the BCM4339 firmware from linux-firmware (version "BCM4339/2 wl0:
Sep 5 2019 11:05:52 version 6.37.39.113 (r722271 CY)" from
cypress/cyfmac4339-sdio.bin) the RSSI respose is only 4 bytes, which
results in an error being logged.
It seems that older devices send only the RSSI field and neither SNR nor
noise is included. Handle this by accepting a 4 byte message and
reading only the RSSI from it.
Fixes:
7dd56ea45a66 ("brcmfmac: add support for CQM RSSI notifications")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230124104248.2917465-1-john@metanate.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Marangi [Thu, 9 Feb 2023 22:26:22 +0000 (23:26 +0100)]
wifi: ath11k: fix SAC bug on peer addition with sta band migration
[ Upstream commit
60b7d62ba8cdbd073997bff0f1cdae8d844002c0 ]
Fix sleep in atomic context warning detected by Smatch static checker
analyzer.
Following the locking pattern for peer_rhash_add lock tbl_mtx_lock mutex
always even if sta is not transitioning to another band.
This is peer_add function and a more secure locking should not cause
performance regression.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Fixes:
d673cb6fe6c0 ("wifi: ath11k: fix peer addition/deletion error on sta band migration")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230209222622.1751-1-ansuelsmth@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 6 Feb 2023 13:15:48 +0000 (16:15 +0300)]
wifi: ath5k: fix an off by one check in ath5k_eeprom_read_freq_list()
[ Upstream commit
4c856ee12df85aabd437c3836ed9f68d94268358 ]
This loop checks that i < max at the start of loop but then it does
i++ which could put it past the end of the array. It's harmless to
check again and prevent a potential out of bounds.
Fixes:
1048643ea94d ("ath5k: Clean up eeprom parsing and add missing calibration data")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/Y+D9hPQrHfWBJhXz@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Wed, 1 Feb 2023 16:54:43 +0000 (08:54 -0800)]
wifi: ath5k: Use platform_get_irq() to get the interrupt
[ Upstream commit
95c95251d0547b46d6571e4fbd51b42865c15a4a ]
As of commit
a1a2b7125e10 ("of/platform: Drop static setup of IRQ
resource from DT core"), we need to use platform_get_irq() instead of
platform_get_resource() to get our IRQs because
platform_get_resource() simply won't get them anymore.
This was already fixed in several other Atheros WiFi drivers,
apparently in response to Zeal Robot reports. An example of another
fix is commit
9503a1fc123d ("ath9k: Use platform_get_irq() to get the
interrupt"). ath5k seems to have been missed in this effort, though.
Fixes:
a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230201084131.v2.2.Ic4f8542b0588d7eb4bc6e322d4af3d2064e84ff0@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Wed, 1 Feb 2023 16:54:42 +0000 (08:54 -0800)]
wifi: ath11k: Use platform_get_irq() to get the interrupt
[ Upstream commit
f117276638b7600b981b3fe28550823cfbe1ef23 ]
As of commit
a1a2b7125e10 ("of/platform: Drop static setup of IRQ
resource from DT core"), we need to use platform_get_irq() instead of
platform_get_resource() to get our IRQs because
platform_get_resource() simply won't get them anymore.
This was already fixed in several other Atheros WiFi drivers,
apparently in response to Zeal Robot reports. An example of another
fix is commit
9503a1fc123d ("ath9k: Use platform_get_irq() to get the
interrupt"). ath11k seems to have been missed in this effort, though.
Without this change, WiFi wasn't coming up on my Qualcomm sc7280-based
hardware. Specifically, "platform_get_resource(pdev, IORESOURCE_IRQ,
i)" was failing even for i=0.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Fixes:
a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core")
Fixes:
00402f49d26f ("ath11k: Add support for WCN6750 device")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Jun Yu <junyuu@chromium.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230201084131.v2.1.I69cf3d56c97098287fe3a70084ee515098390b70@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fedor Pchelkin [Thu, 16 Feb 2023 19:23:01 +0000 (22:23 +0300)]
wifi: ath9k: hif_usb: fix memory leak of remain_skbs
[ Upstream commit
7654cc03eb699297130b693ec34e25f77b17c947 ]
hif_dev->remain_skb is allocated and used exclusively in
ath9k_hif_usb_rx_stream(). It is implied that an allocated remain_skb is
processed and subsequently freed (in error paths) only during the next
call of ath9k_hif_usb_rx_stream().
So, if the urbs are deallocated between those two calls due to the device
deinitialization or suspend, it is possible that ath9k_hif_usb_rx_stream()
is not called next time and the allocated remain_skb is leaked. Our local
Syzkaller instance was able to trigger that.
remain_skb makes sense when receiving two consecutive urbs which are
logically linked together, i.e. a specific data field from the first skb
indicates a cached skb to be allocated, memcpy'd with some data and
subsequently processed in the next call to ath9k_hif_usb_rx_stream(). Urbs
deallocation supposedly makes that link irrelevant so we need to free the
cached skb in those cases.
Fix the leak by introducing a function to explicitly free remain_skb (if
it is not NULL) when the rx urbs have been deallocated. remain_skb is NULL
when it has not been allocated at all (hif_dev struct is kzalloced) or
when it has been processed in next call to ath9k_hif_usb_rx_stream().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes:
fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230216192301.171225-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey V. Vissarionov [Wed, 15 Feb 2023 18:31:37 +0000 (20:31 +0200)]
wifi: ath6kl: minor fix for allocation size
[ Upstream commit
778f83f889e7fca37780d9640fcbd0229ae38eaa ]
Although the "param" pointer occupies more or equal space compared
to "*param", the allocation size should use the size of variable
itself.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
bdcd81707973cf8a ("Add ath6kl cleaned up driver")
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230117110414.GC12547@altlinux.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang He [Wed, 22 Mar 2023 04:16:57 +0000 (12:16 +0800)]
platform/chrome: cros_typec_switch: Add missing fwnode_handle_put()
[ Upstream commit
dc70234c408c644505a24362b0f095f713e4697e ]
In cros_typec_register_switches(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.
Fixes:
affc804c44c8 ("platform/chrome: cros_typec_switch: Add switch driver")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20230322041657.1857001-1-windhl@126.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomáš Pecka [Thu, 20 Apr 2023 17:19:39 +0000 (19:19 +0200)]
hwmon: (pmbus/fsp-3y) Fix functionality bitmask in FSP-3Y YM-2151E
[ Upstream commit
93822f5161a2dc57a60b95b35b3cb8589f53413e ]
The bit flags in pmbus_driver_info functionality for YM-2151E chip were
joined with a comma operator instead of a bitwise OR. This means that
the last constant PMBUS_HAVE_IIN was not OR-ed with the other
PM_BUS_HAVE_* constants for this page but it initialized the next element
of the func array (which was not accessed from anywhere because of the
number of pages).
However, there is no need for setting PMBUS_HAVE_IIN in the 5Vsb page
because this command does not seem to be paged. Obviously, the device
only has one IIN sensor, so it doesn't make sense to query it again from
the second page.
Fixes:
1734b4135a62 ("hwmon: Add driver for fsp-3y PSUs and PDUs")
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Tomáš Pecka <tomas.pecka@cesnet.cz>
Link: https://lore.kernel.org/r/20230420171939.212040-1-tomas.pecka@cesnet.cz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>