Tom Tromey [Tue, 17 Sep 2013 15:18:52 +0000 (09:18 -0600)]
fix CONTRIBUTE for git migration
This fixes gdb's CONTRIBUTE file for the git migration.
* CONTRIBUTE: Update for git.
Jose E. Marchesi [Mon, 21 Oct 2013 12:42:02 +0000 (12:42 +0000)]
2013-10-21 Jose E. Marchesi <jose.marchesi@oracle.com>
PR gdb/15986
* gdb.base/run.c (main): gdb_get_line_number tag added for
commands.exp.
(factorial): Likewise.
* gdb.base/commands.exp (watchpoint_command_test): Use
gdb_get_line_number in order to determine the locations in run.c
where local_var is detected to go out of scope.
Jose E. Marchesi [Mon, 21 Oct 2013 12:34:25 +0000 (12:34 +0000)]
2013-10-21 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.base/gnu_vector.exp: Care about endianness when casting
scalars to vectors.
Alan Modra [Sun, 20 Oct 2013 23:00:04 +0000 (23:00 +0000)]
daily update
Alan Modra [Sat, 19 Oct 2013 23:00:04 +0000 (23:00 +0000)]
daily update
Alan Modra [Fri, 18 Oct 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Chao-ying Fu [Fri, 18 Oct 2013 21:16:57 +0000 (21:16 +0000)]
2013-10-18 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
* gas/mips/micromips@msa-branch.d, gas/mips/msa-branch.d,
gas/mips/msa-branch.s: New.
* gas/mips/mips.exp: Run new tests.
Chao-ying Fu [Fri, 18 Oct 2013 21:14:25 +0000 (21:14 +0000)]
2013-10-18 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
* config/tc-mips.c (fpr_read_mask): Test MSA registers.
(fpr_write_mask): Test MSA registers.
(can_swap_branch_p): Check fpr write followed by fpr read.
Tom Tromey [Fri, 18 Oct 2013 20:40:03 +0000 (20:40 +0000)]
* lib/gdb.exp (build_executable_from_specs): Remove duplicate set
of "binfile".
Andrew Burgess [Fri, 18 Oct 2013 16:25:14 +0000 (16:25 +0000)]
Hardware watchpoints turned off, inferior not yet started.
https://sourceware.org/ml/gdb-patches/2013-10/msg00477.html
gdb/ChangeLog
* breakpoint.c (update_watchpoint): If hardware watchpoints are
forced off, downgrade them to software watchpoints if possible,
and error out if not possible.
(watch_command_1): Move watchpoint type selection closer to
watchpoint creation, and extend the comments.
gdb/testsuite/ChangeLog
* gdb.base/watchpoints.exp: Add test for setting software
watchpoints of different types before starting the inferior.
Pedro Alves [Fri, 18 Oct 2013 14:28:34 +0000 (14:28 +0000)]
[gdb/16062] stepi sometimes doesn't make progress
I noticed something odd while doing "stepi" over a fork syscall:
...
(gdb) set disassemble-next-line on
...
(gdb) si
0x000000323d4ba7c2 131 pid = ARCH_FORK ();
0x000000323d4ba7a4 <__libc_fork+132>: 64 4c 8b 04 25 10 00 00 00 mov %fs:0x10,%r8
0x000000323d4ba7ad <__libc_fork+141>: 31 d2 xor %edx,%edx
0x000000323d4ba7af <__libc_fork+143>: 4d 8d 90 d0 02 00 00 lea 0x2d0(%r8),%r10
0x000000323d4ba7b6 <__libc_fork+150>: 31 f6 xor %esi,%esi
0x000000323d4ba7b8 <__libc_fork+152>: bf 11 00 20 01 mov $0x1200011,%edi
0x000000323d4ba7bd <__libc_fork+157>: b8 38 00 00 00 mov $0x38,%eax
=> 0x000000323d4ba7c2 <__libc_fork+162>: 0f 05 syscall
0x000000323d4ba7c4 <__libc_fork+164>: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
0x000000323d4ba7ca <__libc_fork+170>: 0f 87 2b 01 00 00 ja 0x323d4ba8fb <__libc_fork+475>
(gdb) si
0x000000323d4ba7c4 131 pid = ARCH_FORK ();
0x000000323d4ba7a4 <__libc_fork+132>: 64 4c 8b 04 25 10 00 00 00 mov %fs:0x10,%r8
0x000000323d4ba7ad <__libc_fork+141>: 31 d2 xor %edx,%edx
0x000000323d4ba7af <__libc_fork+143>: 4d 8d 90 d0 02 00 00 lea 0x2d0(%r8),%r10
0x000000323d4ba7b6 <__libc_fork+150>: 31 f6 xor %esi,%esi
0x000000323d4ba7b8 <__libc_fork+152>: bf 11 00 20 01 mov $0x1200011,%edi
0x000000323d4ba7bd <__libc_fork+157>: b8 38 00 00 00 mov $0x38,%eax
0x000000323d4ba7c2 <__libc_fork+162>: 0f 05 syscall
=> 0x000000323d4ba7c4 <__libc_fork+164>: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
0x000000323d4ba7ca <__libc_fork+170>: 0f 87 2b 01 00 00 ja 0x323d4ba8fb <__libc_fork+475>
(gdb) si
0x000000323d4ba7c4 131 pid = ARCH_FORK ();
0x000000323d4ba7a4 <__libc_fork+132>: 64 4c 8b 04 25 10 00 00 00 mov %fs:0x10,%r8
0x000000323d4ba7ad <__libc_fork+141>: 31 d2 xor %edx,%edx
0x000000323d4ba7af <__libc_fork+143>: 4d 8d 90 d0 02 00 00 lea 0x2d0(%r8),%r10
0x000000323d4ba7b6 <__libc_fork+150>: 31 f6 xor %esi,%esi
0x000000323d4ba7b8 <__libc_fork+152>: bf 11 00 20 01 mov $0x1200011,%edi
0x000000323d4ba7bd <__libc_fork+157>: b8 38 00 00 00 mov $0x38,%eax
0x000000323d4ba7c2 <__libc_fork+162>: 0f 05 syscall
=> 0x000000323d4ba7c4 <__libc_fork+164>: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
0x000000323d4ba7ca <__libc_fork+170>: 0f 87 2b 01 00 00 ja 0x323d4ba8fb <__libc_fork+475>
(gdb) si
0x000000323d4ba7ca 131 pid = ARCH_FORK ();
0x000000323d4ba7a4 <__libc_fork+132>: 64 4c 8b 04 25 10 00 00 00 mov %fs:0x10,%r8
0x000000323d4ba7ad <__libc_fork+141>: 31 d2 xor %edx,%edx
0x000000323d4ba7af <__libc_fork+143>: 4d 8d 90 d0 02 00 00 lea 0x2d0(%r8),%r10
0x000000323d4ba7b6 <__libc_fork+150>: 31 f6 xor %esi,%esi
0x000000323d4ba7b8 <__libc_fork+152>: bf 11 00 20 01 mov $0x1200011,%edi
0x000000323d4ba7bd <__libc_fork+157>: b8 38 00 00 00 mov $0x38,%eax
0x000000323d4ba7c2 <__libc_fork+162>: 0f 05 syscall
0x000000323d4ba7c4 <__libc_fork+164>: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
=> 0x000000323d4ba7ca <__libc_fork+170>: 0f 87 2b 01 00 00 ja 0x323d4ba8fb <__libc_fork+475>
Notice how the third "si" didn't actually make progress.
Turning on infrun and lin-lwp debug, we see:
(gdb)
infrun: clear_proceed_status_thread (process 5252)
infrun: proceed (addr=0xffffffffffffffff, signal=144, step=1)
infrun: resume (step=1, signal=0), trap_expected=0, current thread [process 5252] at 0x323d4ba7c4
LLR: Preparing to step process 5252, 0, inferior_ptid process 5252
RC: Not resuming sibling process 5252 (not stopped)
LLR: PTRACE_SINGLESTEP process 5252, 0 (resume event thread)
sigchld
infrun: wait_for_inferior ()
linux_nat_wait: [process -1], []
LLW: enter
LNW: waitpid(-1, ...) returned 5252, No child processes
LLW: waitpid 5252 received Child exited (stopped)
LLW: Candidate event Child exited (stopped) in process 5252.
SEL: Select single-step process 5252
LLW: exit
infrun: target_wait (-1, status) =
infrun: 5252 [process 5252],
infrun: status->kind = stopped, signal = SIGCHLD
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4ba7c4
infrun: random signal 20
infrun: stepi/nexti
infrun: stop_stepping
So the inferior got a SIGCHLD (because the fork child exited while
we're doing 'si'), and since that signal is set to "nostop noprint
pass" (by default), it's considered a random signal, so it should not
cause a stop. But, it resulted in an immediate a stop_stepping call
anyway. So the single-step never really finished.
This is a regression caused by:
[[PATCH] Do not respawn signals, take 2.]
https://sourceware.org/ml/gdb-patches/2012-06/msg00702.html
Specifically, caused by this change (as mentioned in the "the lost
step issue first" part of that mail):
diff --git a/gdb/infrun.c b/gdb/infrun.c
index 53db335..3e8dbc8 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -4363,10 +4363,8 @@ process_event_stop_test:
(leaving the inferior at the step-resume-breakpoint without
actually executing it). Either way continue until the
breakpoint is really hit. */
- keep_going (ecs);
- return;
}
-
+ else
/* Handle cases caused by hitting a breakpoint. */
{
That made GDB fall through to the
> /* In all-stop mode, if we're currently stepping but have stopped in
> some other thread, we need to switch back to the stepped thread. */
> if (!non_stop)
part. However, if we don't have a stepped thread to get back to,
we'll now also fall through to all the "stepping" tests. For line
stepping, that'll turn out okay, as we'll just end up realizing the
thread is still in the stepping range, and needs to be re-stepped.
However, for stepi/nexti, we'll reach:
if (ecs->event_thread->control.step_range_end == 1)
{
/* It is stepi or nexti. We always want to stop stepping after
one instruction. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
}
and stop, even though the thread actually made no progress. The fix
is to restore the keep_going call, but put it after the "switch back
to the stepped thread" code, and before the stepping tests.
Tested on x86_64 Fedora 17, native and gdbserver. New test included.
gdb/
2013-10-18 Pedro Alves <palves@redhat.com>
PR gdb/16062
* infrun.c (handle_inferior_event): Keep going if we got a random
signal we should not stop for, instead of falling through to the
step tests.
gdb/testsuite/
2013-10-18 Pedro Alves <palves@redhat.com>
PR gdb/16062
* gdb.threads/stepi-random-signal.c: New file.
* gdb.threads/stepi-random-signal.exp: New file.
Nick Clifton [Fri, 18 Oct 2013 14:08:00 +0000 (14:08 +0000)]
* config/tc-tic6x.c (tic6x_parse_operand): Revert previous delta.
Hans-Peter Nilsson [Fri, 18 Oct 2013 02:38:35 +0000 (02:38 +0000)]
* ld-cris/asneed1.d: New test.
Hans-Peter Nilsson [Fri, 18 Oct 2013 02:37:51 +0000 (02:37 +0000)]
* elf32-cris.c (cris_elf_check_relocs): Don't assume
a registered dynobj means that a .got has been created.
Yao Qi [Fri, 18 Oct 2013 02:09:57 +0000 (02:09 +0000)]
gdb/
* c-varobj.c (cplus_number_of_children): Fix indentation.
Alan Modra [Thu, 17 Oct 2013 23:00:04 +0000 (23:00 +0000)]
daily update
Maciej W. Rozycki [Thu, 17 Oct 2013 22:02:29 +0000 (22:02 +0000)]
* gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify):
Fix comment typo.
* lib/gdb.exp (gdb_init): Likewise.
Tom Tromey [Thu, 17 Oct 2013 18:29:28 +0000 (18:29 +0000)]
fix for PR gdb/15995
This patch fixes PR gdb/15995.
The bug here is that gdb's printf command does not flush the output
stream. This makes a printf that is not newline-terminated interleave
incorrectly with other forms of output, such as that generated via a
call to an external program using "shell".
I note that the "output" command already does this flushing.
The fix is to call gdb_flush in printf_command.
Built and regtested on x86-64 Fedora 18.
New test case included.
PR gdb/15995:
* printcmd.c (printcmd): Call gdb_flush.
* gdb.base/printcmds.exp (test_printf): Test printf flushing.
Tom Tromey [Thu, 17 Oct 2013 15:41:46 +0000 (15:41 +0000)]
remove unused field from struct elfinfo
I noticed that one field in elfread.c:struct elfinfo is unused.
This patch removes it.
* elfread.c (struct elfinfo) <stabindexsect>: Remove.
(elf_locate_sections): Update.
Yao Qi [Thu, 17 Oct 2013 13:31:33 +0000 (13:31 +0000)]
Remove ada-varobj.h.
As a result of previous patch, extern functions in ada-varobj.c can be
made static, and ada-varobj.h can be removed too.
gdb:
2013-10-17 Yao Qi <yao@codesourcery.com>
* Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
* ada-varobj.c: Remove the include of ada-varobj.h.
(ada_varobj_get_number_of_children): Declare.
(ada_varobj_get_name_of_child): Make it static.
(ada_varobj_get_path_expr_of_child): Likewise.
(ada_varobj_get_value_of_child): Likewise.
(ada_varobj_get_type_of_child): Likewise.
(ada_varobj_get_value_of_array_variable): Likewise.
* ada-varobj.h: Remove.
Yao Qi [Thu, 17 Oct 2013 13:28:37 +0000 (13:28 +0000)]
gdb/
* Makefile.in (SFILES): Add c-varobj.c and jv-varobj.c.
(COMMON_OBS): Add c-varobj.o and jv-varobj.o.
* ada-varobj.c: Include "varobj.h".
(ada_number_of_children): New. Moved from varobj.c.
(ada_name_of_variable, ada_name_of_child): Likewise.
(ada_path_expr_of_child, ada_value_of_child): Likewise.
(ada_type_of_child, ada_value_of_variable): Likewise.
(ada_value_is_changeable_p, ada_value_has_mutated): Likewise.
(ada_varobj_ops): New.
* c-varobj.c, jv-varobj.c: New file. Moved from varobj.c.
* gdbtypes.c (get_target_type): New. Moved from varobj.c.
* gdbtypes.h (get_target_type): Declare.
* varobj.c: Remove the inclusion of "ada-varobj.h" and
"ada-lang.h".
(ANONYMOUS_STRUCT_NAME): Move it to c-varobj.c.
(ANONYMOUS_UNION_NAME): Likewise.
(get_type, get_value_type, get_target_type): Remove declarations.
(value_get_print_value, varobj_value_get_print_value): Likewise.
(c_number_of_children, c_name_of_variable): Likewise.
(c_name_of_child, c_path_expr_of_child): Likewise.
(c_value_of_child, c_type_of_child): Likewise.
(c_value_of_variable, cplus_number_of_children): Likewise.
(cplus_class_num_children, cplus_name_of_variable): Likewise.
(cplus_name_of_child, cplus_path_expr_of_child): Likewise.
(cplus_value_of_child, cplus_type_of_child): Likewise.
(cplus_value_of_variable, java_number_of_children): Likewise.
(java_name_of_variable, java_name_of_child): Likewise.
(java_path_expr_of_child, java_value_of_child): Likewise.
(java_type_of_child, java_value_of_variable): Likewise.
(ada_number_of_children, ada_name_of_variable): Likewise.
(ada_name_of_child, ada_path_expr_of_child): Likewise.
(ada_value_of_child, ada_type_of_child): Likewise.
(ada_value_of_variable, ada_value_is_changeable_p): Likewise.
(ada_value_has_mutated): Likewise.
(struct language_specific): Move it to varobj.h.
(CPLUS_FAKE_CHILD): Move it to varobj.h.
(restrict_range): Rename it varobj_restrict_range. Make it extern.
Callers update.
(get_path_expr_parent): Rename it to varobj_get_path_expr_parent.
Make it extern.
(is_anonymous_child): Move it to c-varobj.c and rename to
varobj_is_anonymous_child. Caller update.
(get_type): Move it to c-varobj.c.
(get_value_type): Rename it varobj_get_value_type. Make it
extern.
(get_target_type): Move it gdbtypes.c.
(varobj_formatted_print_options): New function.
(value_get_print_value): Rename it to
varobj_value_get_print_value and make it extern.
(varobj_value_is_changeable_p): Make it extern.
(adjust_value_for_child_access): Move it to c-varobj.c.
(default_value_is_changeable_p): Rename it to
varobj_default_value_is_changeable_p. Make it extern.
(c_number_of_children, c_name_of_variable): Move it to c-varobj.c
(c_name_of_child, c_path_expr_of_child): Likewise.
(c_value_of_child, c_type_of_child): Likewise.
(c_value_of_variable, cplus_number_of_children): Likewise.
(cplus_class_num_children, cplus_name_of_variable): Likewise.
(cplus_name_of_child, cplus_path_expr_of_child): Likewise.
(cplus_value_of_child, cplus_type_of_child): Likewise.
(cplus_value_of_variable): Likewise.
(java_number_of_children, java_name_of_variable): Move it to jv-varobj.c.
(java_name_of_child, java_path_expr_of_child): Likewise.
(java_value_of_child, java_type_of_child): Likewise.
(java_value_of_variable): Likewise.
(ada_number_of_children, ada_name_of_variable): Move it to ada-varobj.c.
(ada_name_of_child, ada_path_expr_of_child): Likewise.
(ada_value_of_child, ada_type_of_child): Likewise.
(ada_value_of_variable, ada_value_is_changeable_p): Likewise.
(ada_value_has_mutated): Likewise.
* varobj.h (CPLUS_FAKE_CHILD): New macro, moved from varobj.c.
(struct lang_varobj_ops): New. Renamed by 'struct language_specific'.
(c_varobj_ops, cplus_varobj_ops): Declare.
(java_varobj_ops, ada_varobj_ops): Declare.
(varobj_default_value_is_changeable_p): Declare.
(varobj_value_is_changeable_p): Declare.
(varobj_get_value_type, varobj_is_anonymous_child): Declare.
(varobj_get_path_expr_parent): Declare.
(varobj_value_get_print_value): Declare.
(varobj_formatted_print_options): Declare.
(varobj_restrict_range): Declare.
Luis Machado [Thu, 17 Oct 2013 10:21:37 +0000 (10:21 +0000)]
* target/waitstatus.h (target_waitkind): Remove spurious
character from the comments.
Alan Modra [Thu, 17 Oct 2013 10:05:38 +0000 (10:05 +0000)]
PR 16056
* elf.c (copy_elf_program_header): Only consider SEC_ALLOC sections
when finding lowest_section.
Joel Brobecker [Thu, 17 Oct 2013 06:11:22 +0000 (06:11 +0000)]
Document the get_longjmp_target gdbarch method.
gdb/ChangeLog:
* gdbarch.sh (get_longjmp_target): Add method documentation.
* gdbarch.h: Regenerate.
Alan Modra [Wed, 16 Oct 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Jan-Benedict Glaw [Wed, 16 Oct 2013 20:45:20 +0000 (20:45 +0000)]
2013-10-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* ChangeLog: Sync from GCC.
* mh-darwin: Ditto.
* bootstrap-ubsan.mk: Ditto.
Jan-Benedict Glaw [Wed, 16 Oct 2013 20:36:39 +0000 (20:36 +0000)]
2013-10-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* configure.ac: Update from GCC.
* configure: Regenerate.
Tom Tromey [Wed, 16 Oct 2013 16:00:23 +0000 (16:00 +0000)]
* dbxread.c (read_dbx_symtab) <bss_ext_symbol>: Remove unused
label.
Luis Machado [Wed, 16 Oct 2013 15:08:11 +0000 (15:08 +0000)]
* gcore.in: Call GDB using the full path to the gcore script.
Error out if the GDB binary is not found.
Sergio Durigan Junior [Wed, 16 Oct 2013 02:55:27 +0000 (02:55 +0000)]
There were two functions who were calling "sizeof" twice.
The first one, dw2_get_real_path from gdb/dwarf2read.c, was actually
making use of OBSTACK_CALLOC which already calls "sizeof" for its third
argument.
The second, download_tracepoint_1 from gdb/gdbserver/tracepoint.c, was
explicitly calling "sizeof" inside another "sizeof".
This patch fixed both functions.
gdb/ChangeLog
2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/16014
* dwarf2read.c (dw2_get_real_path): Remove unnecessary call to
sizeof.
gdb/gdbserver/ChangeLog
2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/16014
* tracepoint.c (download_tracepoint_1): Remove unnecessary double
call to sizeof.
Sergio Durigan Junior [Wed, 16 Oct 2013 02:41:42 +0000 (02:41 +0000)]
This is a simple bug. target_disable_btrace and target_teardown_btrace,
both from gdb/target.c, do a "return" calling another function. But both
are marked as void. Despite the fact that the functions being called are
void as well, this is wrong. This patch fixes this by calling the functions
and then returning in the next line.
2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/16042
* target.c (target_disable_btrace): Fix invalid return value for
void function.
(target_teardown_btrace): Likewise.
DJ Delorie [Wed, 16 Oct 2013 00:29:48 +0000 (00:29 +0000)]
merge from gcc
Alan Modra [Tue, 15 Oct 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Hans-Peter Nilsson [Tue, 15 Oct 2013 20:45:52 +0000 (20:45 +0000)]
* src-release (do-proto-toplevel): Support subdir-path-prefixed
files in SUPPORT_FILES.
(SIM_SUPPORT_DIRS): New variable.
(sim.tar.bz2): New rule.
Hans-Peter Nilsson [Tue, 15 Oct 2013 20:42:07 +0000 (20:42 +0000)]
* Makefile.in (srcsim): New variable.
(version.c): Adjust call to $(srccom)/create-version.sh as per change.
Hans-Peter Nilsson [Tue, 15 Oct 2013 20:40:22 +0000 (20:40 +0000)]
* create-version.sh: Align parameters to match those of
../../gdb/common/create-version.sh.
* Make-common.in (srcsim): New variable.
(version.c): Adjust call to create-version.sh as per above.
Ramana Radhakrishnan [Tue, 15 Oct 2013 13:30:40 +0000 (13:30 +0000)]
Fix neon vshll disassembly.
opcodes/
2013-10-15 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
* arm-dis.c (neon_opcodes): Adjust print string for vshll.
gas/testsuite/
2013-10-15 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
* gas/arm/neon-cov.d: Adjust output.
Nick Clifton [Tue, 15 Oct 2013 08:32:36 +0000 (08:32 +0000)]
revert previous delta.
Chao-ying Fu [Mon, 14 Oct 2013 19:06:20 +0000 (19:06 +0000)]
2013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
* gas/mips/micromips@msa-relax.d, gas/mips/micromips@msa.d,
gas/mips/micromips@msa64.d, gas/mips/msa-relax.d,
gas/mips/msa-relax.l, gas/mips/msa-relax.s,
gas/mips/msa.d, gas/mips/msa.s, gas/mips/msa64.d,
gas/mips/msa64.s: New.
* gas/mips/mips.exp: Run new tests.
Chao-ying Fu [Mon, 14 Oct 2013 19:02:00 +0000 (19:02 +0000)]
2013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
* ld-mips-elf/attr-gnu-8-0.s, ld-mips-elf/attr-gnu-8-1.s,
ld-mips-elf/attr-gnu-8-2.s,
ld-mips-elf/attr-gnu-8-00.d, ld-mips-elf/attr-gnu-8-01.d,
ld-mips-elf/attr-gnu-8-02.d, ld-mips-elf/attr-gnu-8-10.d,
ld-mips-elf/attr-gnu-8-11.d, ld-mips-elf/attr-gnu-8-12.d,
ld-mips-elf/attr-gnu-8-20.d, ld-mips-elf/attr-gnu-8-21.d,
ld-mips-elf/attr-gnu-8-22.d: New.
* ld-mips-elf/mips-elf.exp: Run new tests.
Chao-ying Fu [Mon, 14 Oct 2013 18:58:15 +0000 (18:58 +0000)]
2013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
* micromips-opc.c (decode_micromips_operand): Add +T, +U, +V, +W,
+d, +e, +h, +k, +l, +n, +o, +u, +v, +w, +x,
+~, +!, +@, +#, +$, +%, +^, +&, +*, +|.
(MSA): New define.
(MSA64): New define.
(micromips_opcodes): Add MSA instructions.
* mips-dis.c (msa_control_names): New array.
(mips_abi_choice): Add ASE_MSA to mips32r2.
Remove ASE_MDMX from mips64r2.
Add ASE_MSA and ASE_MSA64 to mips64r2.
(parse_mips_dis_option): Handle -Mmsa.
(print_reg): Handle cases for OP_REG_MSA and OP_REG_MSA_CTRL.
(print_insn_arg): Handle cases for OP_IMM_INDEX and OP_REG_INDEX.
(print_mips_disassembler_options): Print -Mmsa.
* mips-opc.c (decode_mips_operand): Add +T, +U, +V, +W, +d, +e, +h, +k,
+l, +n, +o, +u, +v, +w, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|.
(MSA): New define.
(MSA64): New define.
(mips_builtin_op): Add MSA instructions.
Chao-ying Fu [Mon, 14 Oct 2013 18:50:54 +0000 (18:50 +0000)]
2013-10-14 Richard Sandiford <rdsandiford@googlemail.com>
Chao-ying Fu <Chao-ying.Fu@imgtec.com>
* config/tc-mips.c (options): Add OPTION_MSA and OPTION_NO_MSA.
(md_longopts): Add mmsa and mno-msa.
(mips_ases): Add msa.
(RTYPE_MASK): Update.
(RTYPE_MSA): New define.
(OT_REG_ELEMENT): Replace with...
(OT_INTEGER_INDEX, OT_REG_INDEX): ...these new operand types.
(mips_operand_token): Replace reg_element with index.
(mips_parse_argument_token): Treat vector indices as separate tokens.
Handle register indices.
(md_begin): Add MSA register names.
(operand_reg_mask): Handle cases for OP_IMM_INDEX and OP_REG_INDEX.
(convert_reg_type): Handle cases for OP_REG_MSA and OP_REG_MSA_CTRL.
(match_mdmx_imm_reg_operand): Update accordingly.
(match_imm_index_operand): New function.
(match_reg_index_operand): New function.
(match_operand): Handle cases for OP_IMM_INDEX and OP_REG_INDEX.
(md_convert_frag): Convert bz.b/h/w/d, bnz.b/h/w/d, bz.v bnz.v.
(md_show_usage): Print -mmsa and -mno-msa.
* doc/as.texinfo: Document -mmsa and -mno-msa.
* doc/c-mips.texi: Document -mmsa and -mno-msa.
Document .set msa and .set nomsa.
Chao-ying Fu [Mon, 14 Oct 2013 18:45:46 +0000 (18:45 +0000)]
2013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
* readelf.c (display_mips_gnu_attribute): Support Tag_GNU_MIPS_ABI_MSA.
* doc/binutils.texi: Document -Mmsa disassembler option.
Chao-ying Fu [Mon, 14 Oct 2013 18:43:39 +0000 (18:43 +0000)]
2013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
* elfxx-mips.c (mips_elf_obj_tdata): Add abi_msa_bfd.
(mips_elf_merge_obj_attributes): Set abi_msa_bfd to the first object
file that has a Tag_GNU_MIPS_ABI_MSA attribute.
Merge Tag_GNU_MIPS_ABI_MSA attributes.
Chao-ying Fu [Mon, 14 Oct 2013 18:41:17 +0000 (18:41 +0000)]
2013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
* mips.h (mips_operand_type): Add OP_IMM_INDEX and OP_REG_INDEX.
(mips_reg_operand_type): Add OP_REG_MSA and OP_REG_MSA_CTRL.
For MIPS, add comments for +d, +e, +h, +k, +l, +n, +o, +u, +v, +w,
+T, +U, +V, +W, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|.
For MIPS, update extension character sequences after +.
(ASE_MSA): New define.
(ASE_MSA64): New define.
For microMIPS, add comments for +d, +e, +h, +k, +l, +n, +o, +u, +v, +w,
+x, +T, +U, +V, +W, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|.
For microMIPS, update extension character sequences after +.
Chao-ying Fu [Mon, 14 Oct 2013 18:37:05 +0000 (18:37 +0000)]
2013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
* mips.h (enum): Add Tag_GNU_MIPS_ABI_MSA.
(enum): Add Val_GNU_MIPS_ABI_MSA_ANY and Val_GNU_MIPS_ABI_MSA_128.
Tom Tromey [Mon, 14 Oct 2013 16:20:13 +0000 (16:20 +0000)]
* gdb.dwarf2/dwzbuildid.exp (write_dwarf_file): Pass explicit test
name to gdb_test_no_output.
Jan-Benedict Glaw [Mon, 14 Oct 2013 12:53:40 +0000 (12:53 +0000)]
2013-10-14 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* readelf.c (decode_arm_unwind): Don't initialize `addr'.
Nick Clifton [Mon, 14 Oct 2013 09:15:09 +0000 (09:15 +0000)]
* gen-aout.c (main): Fix formatting. Close file.
* emultempl/aix.em (_read_file): Close file at end of function.
* gas/all/itbl-test.c (main): Close fas.
* read.c (add_include_dir): Use xrealloc.
* config/tc-score.c (do_macro_bcmp): Initialise inst_main.
* config/tc-tic6x.c (tic6x_parse_operand): Initialise second_reg.
* readelf.c (decode_arm_unwind): Initialise addr structure.
(process_symbol_table): Free lengths.
* srcconv.c (wr_sc): Free info.
* chew.c (perform): Free next.
Yao Qi [Mon, 14 Oct 2013 08:16:45 +0000 (08:16 +0000)]
gdb/
* varobj.c (struct varobj): Move most of the fields to
varobj.h.
(struct varobj_dynamic): New struct.
(varobj_get_display_hint) [HAVE_PYTHON]: Adjust.
(varobj_has_more): Likewise.
(dynamic_varobj_has_child_method): Likewise.
(update_dynamic_varobj_children): Likewise.
(varobj_get_num_children): Likewise.
(varobj_list_children, varobj_pretty_printed_p): Likewise.
(install_new_value_visualizer): Likewise.
(install_new_value_visualizer, install_new_value): Likewise.
(varobj_update, new_variable, free_variable): Likewise.
(my_value_of_variable, value_get_print_value): Likewise.
(install_visualizer): Change the type of parameter 'var' to
'struct varobjd_dynamic *'. Callers update.
* varobj.h (struct varobj): Moved from varobj.c.
(struct varobj) <dynamic>: New field.
Alan Modra [Mon, 14 Oct 2013 02:53:01 +0000 (02:53 +0000)]
* output.h (Output_data_got::add_constant): Tidy.
(Output_data_got::add_constant_pair): New function.
* powerpc.cc (Output_data_got_powerpc): Override all Output_data_got
methods used so as to first call reserve_ent().
Sandra Loosemore [Mon, 14 Oct 2013 01:02:39 +0000 (01:02 +0000)]
2013-10-13 Sandra Loosemore <sandra@codesourcery.com>
gdb/
* nios2-tdep.c (nios2_reg_names): Use "sstatus" rather than "ba"
as the preferred name of r30.
* nios2-linux-tdep.c (reg_offsets): Likewise.
* features/nios2-cpu.xml: Likewise.
* features/nios2-linux.c: Regenerated.
* features/nios2.c: Regenerated.
* regformats/nios2-linux.dat: Regenerated.
Sandra Loosemore [Mon, 14 Oct 2013 00:42:28 +0000 (00:42 +0000)]
2013-10-13 Sandra Loosemore <sandra@codesourcery.com>
opcodes/
* nios2-opc.c (nios2_builtin_reg): Use "sstatus" rather than "ba"
as the primary name of r30.
gas/
* config/tc-nios2.c (nios2_consume_arg): Make the "ba" warning
also test/refer to "sstatus". Reformat the warning message.
gas/testsuite/
* gas/nios2/warn_nobreak.l: Update text of warning messages.
* gas/nios2/registers.s: Use "sstatus" rather than "ba"
as the primary name of r30.
* gas/nios2/registers.d: Likewise.
Alan Modra [Sun, 13 Oct 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Jan Kratochvil [Sun, 13 Oct 2013 16:11:08 +0000 (16:11 +0000)]
Improve Executable displayed path (PR 15415 regression kind #2)
gdb/
2013-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
Canonicalize directories for EXEC_FILENAME.
* exec.c (exec_file_attach): Use gdb_realpath_keepfile for
exec_filename.
* utils.c (gdb_realpath_keepfile): New function.
* utils.h (gdb_realpath_keepfile): New declaration.
gdb/testsuite/
2013-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
Canonicalize directories for EXEC_FILENAME.
* gdb.base/argv0-symlink.exp
(kept file symbolic link name for info inferiors): New.
(kept directory symbolic link name): Setup kfail.
(kept directory symbolic link name for info inferiors): New.
Richard Sandiford [Sun, 13 Oct 2013 10:17:20 +0000 (10:17 +0000)]
ld/testsuite/
* lib/ld-lib.exp (default_ld_compile): Add a -I option for the source
directory.
* ld-mips-elf/compressed-plt-1.ld, ld-mips-elf/compressed-plt-1.s,
ld-mips-elf/compressed-plt-1-dyn.s, ld-mips-elf/compressed-plt-1a.s,
ld-mips-elf/compressed-plt-1b.s, ld-mips-elf/compressed-plt-1c.s,
ld-mips-elf/compressed-plt-1d.s, ld-mips-elf/compressed-plt-1e.s,
ld-mips-elf/compressed-plt-1-o32-se.rd,
ld-mips-elf/compressed-plt-1-o32-se.od,
ld-mips-elf/compressed-plt-1-o32-mips16-only.rd,
ld-mips-elf/compressed-plt-1-o32-mips16-only.od,
ld-mips-elf/compressed-plt-1-o32-umips-only.rd,
ld-mips-elf/compressed-plt-1-o32-umips-only.od,
ld-mips-elf/compressed-plt-1-o32-mips16.rd,
ld-mips-elf/compressed-plt-1-o32-mips16.od,
ld-mips-elf/compressed-plt-1-o32-mips16-got.rd,
ld-mips-elf/compressed-plt-1-o32-mips16-got.od,
ld-mips-elf/compressed-plt-1-o32-mips16-word.rd,
ld-mips-elf/compressed-plt-1-o32-mips16-word.od,
ld-mips-elf/compressed-plt-1-o32-umips.rd,
ld-mips-elf/compressed-plt-1-o32-umips.od,
ld-mips-elf/compressed-plt-1-o32-umips-got.rd,
ld-mips-elf/compressed-plt-1-o32-umips-got.od,
ld-mips-elf/compressed-plt-1-o32-umips-word.rd,
ld-mips-elf/compressed-plt-1-o32-umips-word.od,
ld-mips-elf/compressed-plt-1-n32-mips16.rd,
ld-mips-elf/compressed-plt-1-n32-mips16.od,
ld-mips-elf/compressed-plt-1-n32-umips.rd,
ld-mips-elf/compressed-plt-1-n32-umips.od: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
Richard Sandiford [Sun, 13 Oct 2013 10:03:22 +0000 (10:03 +0000)]
bfd/
* elfxx-mips.c (mips_use_local_got_p): New function.
(mips_elf_count_got_symbols, mips_elf_calculate_relocation): Use it.
(_bfd_mips_elf_check_relocs): Set pointer_equality_needed for
GOT and absolute references.
ld/testsuite/
* ld-mips-elf/pic-and-nonpic-6-n32.ad,
ld-mips-elf/pic-and-nonpic-6-n32.dd,
ld-mips-elf/pic-and-nonpic-6-n32.gd,
ld-mips-elf/pic-and-nonpic-6-n32.nd,
ld-mips-elf/pic-and-nonpic-6-n32.rd,
ld-mips-elf/pic-and-nonpic-6-n64.ad,
ld-mips-elf/pic-and-nonpic-6-n64.dd,
ld-mips-elf/pic-and-nonpic-6-n64.gd,
ld-mips-elf/pic-and-nonpic-6-n64.nd,
ld-mips-elf/pic-and-nonpic-6-n64.rd,
ld-mips-elf/pic-and-nonpic-6-o32.ad,
ld-mips-elf/pic-and-nonpic-6-o32.dd,
ld-mips-elf/pic-and-nonpic-6-o32.gd,
ld-mips-elf/pic-and-nonpic-6-o32.nd,
ld-mips-elf/pic-and-nonpic-6-o32.rd: Fix symbol value of extf4.
No longer expect extf3, extf4 and extd2 to be in the global GOT.
Alan Modra [Sat, 12 Oct 2013 23:00:05 +0000 (23:00 +0000)]
daily update
H.J. Lu [Sat, 12 Oct 2013 15:57:07 +0000 (15:57 +0000)]
Only allow 32-bit/64-bit registers for bndcl/bndcu/bndcn
gas/testsuite/
* gas/i386/mpx.s: Remove bndcl/bndcu/bndcn tests with AX.
* gas/i386/x86-64-mpx.s: Likwise.
* gas/i386/mpx.d: Updated.
* gas/i386/x86-64-mpx.d: Likewise.
opcodes/
* i386-dis.c (intel_operand_size): Move v_bnd_mode alongside the
default case.
(OP_E_register): Move v_bnd_mode alongside m_mode.
* i386-opc.tbl (bndcl, bndcu, bndcn): Split 32- and 64-bit variants.
Drop Reg16 and Disp16. Add NoRex64.
(bndmk, bndmov, bndldx, bndstx): Drop Disp16.
* i386-tbl.h: Re-generate.
Roland McGrath [Fri, 11 Oct 2013 23:06:08 +0000 (23:06 +0000)]
gold/
* powerpc.cc (Output_data_got_powerpc): Remove unused methods
add_got_entry and add_got_entry_pair.
Alan Modra [Fri, 11 Oct 2013 23:00:04 +0000 (23:00 +0000)]
daily update
Roland McGrath [Fri, 11 Oct 2013 22:16:34 +0000 (22:16 +0000)]
Revert inappropriate portions of last change.
Roland McGrath [Fri, 11 Oct 2013 22:07:40 +0000 (22:07 +0000)]
gold/
* configure.ac (TLS_GNU2_DIALECT): Use -Werror in test.
(HAVE_PUBNAMES): Likewise.
* configure: Regenerate.
Roland McGrath [Fri, 11 Oct 2013 22:05:16 +0000 (22:05 +0000)]
gold/
* testsuite/Makefile.am: Replace '-T foo' with '-Wl,-T,foo' throughout.
* testsuite/Makefile.in: Regenerate.
Roland McGrath [Fri, 11 Oct 2013 22:02:21 +0000 (22:02 +0000)]
gold/
* target.h (Target::adjust_elf_header, Target::do_adjust_elf_header):
Remove const from declaration.
* target.cc (Sized_target::do_adjust_elf_header): Update definition.
* sparc.cc (Target_sparc::do_adjust_elf_header): Likewise.
* output.h (Output_file_header): Remove const from member target_
and corresponding constructor argument.
* output.cc (Output_file_header::Output_file_header): Update prototype.
(Output_file_header::do_sized_write): Use this->target_ in place
of parameters()->target().
Roland McGrath [Fri, 11 Oct 2013 21:59:46 +0000 (21:59 +0000)]
gold/
* testsuite/undef_symbol.cc (Foo::get_a): New method.
Roland McGrath [Fri, 11 Oct 2013 21:56:16 +0000 (21:56 +0000)]
gold/
* configure.ac (MERGE_CONSTANTS_FLAG): New check.
* configure: Regenerate.
* Makefile.in: Regenerate.
* testsuite/merge_string_literals_1.c: Renamed to have .cc suffix.
* testsuite/merge_string_literals_2.c: Likewise.
* testsuite/Makefile.am
(merge_string_literals_1.o, merge_string_literals_2.o): Update deps.
(AM_CFLAGS, AM_CXXFLAGS): Use $(MERGE_CONSTANTS_FLAG) in place of
literal -fmerge-constants.
* testsuite/Makefile.in: Regenerate.
Roland McGrath [Fri, 11 Oct 2013 21:11:49 +0000 (21:11 +0000)]
gold/
* i386.cc (Target_i386): Remove unused member dynbss_.
* arm.cc (Target_arm): Likewise.
* powerpc.cc (Target_powerpc): Likewise.
* sparc.cc (Target_sparc): Likewise.
* tilegx.cc (Target_tilegx): Likewise.
* x86_64.cc (Target_x86_64): Likewise.
* dwarf_reader.h (Dwarf_info_reader): Remove unused members
type_signature_, type_offset_.
* plugin.h (Plugin_hook): Remove unused member layout_.
* readsyms.h (Add_symbols): Remove unused members dirpath_, dirindex_,
mapfile_.
(Read_member): Remove unused members input_objects_, symtab_,
mapfile_, layout_.
(Check_library): Remove unused member symtab_.
* archive.h (Lib_group): Remove unused member lib_.
* archive.cc (Lib_group::Lib_group): Update initializer.
* incremental.h (Incremental_binary): Remove unused member target_.
(Incremental_script_entry): Removed unused member script_.
* layout.h (Write_symbols_task): Remove unused member input_objects_.
* icf.h (Icf): Remove unused member num_tracked_relocs.
Roland McGrath [Fri, 11 Oct 2013 21:02:43 +0000 (21:02 +0000)]
gold/
* gold-threads.h (Once): Conditionalize member was_run_lock_ on
[ENABLE_THREADS && __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4], matching
its only use.
* gold-threads.cc (Once::Once): Likewise conditionalize initializer.
Ulrich Weigand [Fri, 11 Oct 2013 18:50:56 +0000 (18:50 +0000)]
testsuite/ChangeLog:
2013-10-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/s390-multiarch.exp: New file.
* gdb.arch/s390-multiarch.c: New file.
Roland McGrath [Fri, 11 Oct 2013 17:38:32 +0000 (17:38 +0000)]
gold/
* archive.h: Use struct rather than class for forward declaration
of Read_symbols_data.
Doug Evans [Fri, 11 Oct 2013 17:32:30 +0000 (17:32 +0000)]
* Makefile.in (GDBFLAGS): New variable.
(run): New rule.
Roland McGrath [Fri, 11 Oct 2013 17:24:26 +0000 (17:24 +0000)]
binutils/
* winduni.c (languages): Use \345 (octal syntax) rather than
literal non-ASCII/non-UTF8 character in string literal.
Roland McGrath [Fri, 11 Oct 2013 17:10:58 +0000 (17:10 +0000)]
binutils/
* readelf.c (print_dynamic_symbol): Use array subscript syntax
rather than addition syntax with string literal.
Joel Brobecker [Fri, 11 Oct 2013 14:06:40 +0000 (14:06 +0000)]
ChangeLog entries for the previous commit.
git-related mistake (added the files to the index, but forgot to
commit --amend them before pushing the commit)
Joel Brobecker [Fri, 11 Oct 2013 13:51:27 +0000 (13:51 +0000)]
Document the -catch-assert and -catch-exception new GDB/MI commands.
This patch adds documentation for the new GDB/MI commands "-catch-assert"
and "-catch-exception", meant to provide the same functionality as
the "catch assert", "catch exception" and "catch exception unhandled"
CLI commands.
In the GDB Manual, there was already a section for catchpoint comments,
so that seemed like a natural place to document the new commands. But
commands related to a given concept seem to have traditionally been
organized alphabetically, and I didn't want future commands to break
down logical pairing of various commands. For instance, "-catch-load"
and "-catch-unload" are quite "distant" from each other, and it is easy
to imagine a new comment which would alphabetically fall in between,
causing them to be separated. So I introduced subsections to prevent
that from happening.
gdb/ChangeLog:
* NEWS: Add entry documenting the new "-catch-assert" and
"-catch-exception" GDB/MI commands.
gdb/doc/ChangeLog:
* gdb.texinfo (Shared Library GDB/MI Catchpoint Commands):
New subsection inside which the "-catch-load" and "-catch-unload"
commands documentation is now placed.
(Ada Exception GDB/MI Catchpoint Commands): New subsection
documenting the "-catch-assert" and "-catch-exception" new
GDB/MI commands.
Joel Brobecker [Fri, 11 Oct 2013 13:49:36 +0000 (13:49 +0000)]
Adjust gdb.ada/mi_catch_ex.exp to use GDB/MI catch commands...
... in place of the CLI "catch ..." commands. The latter were used
because the GDB/MI equivalents were not available at the time.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_catch_ex.exp: Adjusts all "catch ..." tests to
use the appropriate GDB/MI command instead, and verify
the test output.
Joel Brobecker [Fri, 11 Oct 2013 13:48:19 +0000 (13:48 +0000)]
New GDB/MI commands to catch Ada exceptions
This patch introduces two new GDB/MI commands implementing the equivalent
of the "catch exception" and "catch assert" GDB/CLI commands.
gdb/ChangeLog:
* breakpoint.h (init_ada_exception_breakpoint): Add parameter
"enabled".
* breakpoint.c (init_ada_exception_breakpoint): Add parameter
"enabled". Set B->ENABLE_STATE accordingly.
* ada-lang.h (ada_exception_catchpoint_kind): Move here from
ada-lang.c.
(create_ada_exception_catchpoint): Add declaration.
* ada-lang.c (ada_exception_catchpoint_kind): Move to ada-lang.h.
(create_ada_exception_catchpoint): Make non-static. Add new
parameter "disabled". Use it in call to
init_ada_exception_breakpoint.
(catch_ada_exception_command): Add parameter "enabled" in call
to create_ada_exception_catchpoint.
(catch_assert_command): Likewise.
* mi/mi-cmds.h (mi_cmd_catch_assert, mi_cmd_catch_exception):
Add declarations.
* mi/mi-cmds.c (mi_cmds): Add the "catch-assert" and
"catch-exception" commands.
* mi/mi-cmd-catch.c: Add #include "ada-lang.h".
(mi_cmd_catch_assert, mi_cmd_catch_exception): New functions.
Joel Brobecker [Fri, 11 Oct 2013 13:45:27 +0000 (13:45 +0000)]
Add "ada_" prefix to enum ada_exception_catchpoint_kind
This is in preparation for making that type public, in order to be
able to use make create_ada_exception_catchpoint public as well,
making it usable from the GDB/MI implementation.
gdb/ChangeLog:
* ada-lang.c (enum ada_exception_catchpoint_kind): Renames
"enum exception_catchpoint_kind". Replace the "ex_" prefix
of all its enumerates with "ada_". Update the rest of this
file throughout.
Joel Brobecker [Fri, 11 Oct 2013 13:44:11 +0000 (13:44 +0000)]
Rework a bit Ada exception catchpoint support (in prep for GDB/MI)
This patch reworks a bit how the different steps required to insert
an Ada exception catchpoints are organized. They used to be:
1. Call a "decode" function which does:
1.a. Parse the command and its arguments
1.b. Create a SAL & OPS from some of those arguments
2. Call create_ada_exception_catchpoint using SAL as well
as some of the arguments extracted above.
The bulk of the change consists in integrating step (1.b) into
step (2) in order to turn create_ada_exception_catchpoint into
a function whose arguments are all user-level concepts. This
paves the way from a straightforward implementation of the equivalent
commands in the GDB/MI interpreter.
gdb/ChangeLog:
* ada-lang.c (ada_decode_exception_location): Delete.
(create_ada_exception_catchpoint): Remove arguments "sal",
"addr_string" and "ops". Add argument "ex_kind" instead.
Adjust implementation accordingly, calling ada_exception_sal
to get the entities it no longer gets passed as arguments.
Document the function's arguments.
(catch_ada_exception_command): Use catch_ada_exception_command_split
instead of ada_decode_exception_location, and update call to
create_ada_exception_catchpoint.
(catch_ada_assert_command_split): Renames
ada_decode_assert_location. Remove parameters "addr_string" and
"ops", and now returns void. Adjust implementation accordingly.
Update the function documentation.
(catch_assert_command): Use catch_ada_assert_command_split
instead of ada_decode_assert_location. Update call to
create_ada_exception_catchpoint.
Joel Brobecker [Fri, 11 Oct 2013 13:42:06 +0000 (13:42 +0000)]
Fix dates (wrong month) in the last 2 ChangeLog entries.
Joel Brobecker [Fri, 11 Oct 2013 08:23:11 +0000 (08:23 +0000)]
warn if "source" fails to open the file when from_tty == 0
Consider the following example:
% gdb -q -batch -ex 'source nonexistant-file'
[nothing]
One would have at least expected the debugger to warn about
not finding the file, similar to the error shown when using
a more interactive mode. Eg:
(gdb) source nonexistant-file
nonexistant-file: No such file or directory.
Not raising an error appears to be intentional, presumably in order
to prevent this situation from stoping the execution of a GDB script.
But the lack of at least a warning makes it harder for a user to
diagnose any issue, if the file was expected to be there and readable.
This patch adds a warning in that case:
% gdb -q -batch -ex 'source nonexistant-file'
warning: nonexistant-file: No such file or directory.
gdb/ChangeLog:
* utils.h (perror_warning_with_name): Add declaration.
* utils.c (perror_warning_with_name): New function.
* cli/cli-cmds.c (source_script_with_search): Add call to
perror_warning_with_name if from_tty is nul.
gdb/testsuite/ChangeLog:
* gdb.base/source-nofile.gdb: New file.
* gdb.base/source.exp: Add two tests verifying the behavior when
the "source" command is given a non-existant filename.
Joel Brobecker [Fri, 11 Oct 2013 08:20:10 +0000 (08:20 +0000)]
new function perror_string extracted out of throw_perror_with_name.
The main purpose of this patch is to extract the part of
throw_perror_with_name that computes a string providing the system
error message combined with a prefix string. This will become useful
later on to provide a routine which prints a warning using that
perror_string, rather than throwing an error.
gdb/ChangeLog:
* utils.c (perror_string): New function, extracted out of
throw_perror_with_name.
(throw_perror_with_name): Rework to use perror_string.
Yao Qi [Fri, 11 Oct 2013 07:27:46 +0000 (07:27 +0000)]
gdb/testsuite/
* gdb.mi/mi-catch-load.c: Remove the include of "dlfcn.h".
[__WIN32__]: Include "windows.h" and define macro 'dlopen'
and 'dlclose'.
[!__WIN32__]: Include "dlfcn.h".
* gdb.mi/mi-catch-load.exp: Set up kfail.
Sean Keys [Fri, 11 Oct 2013 04:55:42 +0000 (04:55 +0000)]
* Removed short_hand field from opcode table and
refactored assembler/disassember accordingly.
Testsuite checkout OK.
Joel Brobecker [Fri, 11 Oct 2013 04:50:26 +0000 (04:50 +0000)]
Adjust gdb/doc/ChangeLog re "set/show remotebaud" renaming...
... adding the node names, to be more explicit about which nodes
were affected by this change.
Yao Qi [Fri, 11 Oct 2013 03:01:09 +0000 (03:01 +0000)]
gdb/
Typo fix in my previous commit.
Yao Qi [Fri, 11 Oct 2013 02:54:44 +0000 (02:54 +0000)]
gdb/
* remote.c (discard_pending_stop_replies_in_queue): Update
declaration.
(struct stop_reply) <rs>: New field.
(remove_stop_reply_of_remote_state): New function.
(discard_pending_stop_replies_in_queue): Add parameter 'rs'.
Callers update. Pass remove_stop_reply_of_remote_state to
QUEUE_iterate.
(remote_parse_stop_reply): Initialize field 'rs'.
Sean Keys [Fri, 11 Oct 2013 01:41:49 +0000 (01:41 +0000)]
* gas/xgate/all_insns.d: Add com macro insn test.
* gas/xgate/all_insns.s: Add com macro insn test.
Roland McGrath [Fri, 11 Oct 2013 00:58:29 +0000 (00:58 +0000)]
opcodes/
* i386-dis.c (oappend_maybe_intel): New function.
(OP_ST, OP_STi, append_seg, OP_I, OP_I64, OP_sI, OP_ESreg): Use it.
(OP_C, OP_T, CMP_Fixup, OP_EX_VexImmW): Likewise.
(VCMP_Fixup, VPCMP_Fixup, PCLMUL_Fixup): Likewise.
Alan Modra [Thu, 10 Oct 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Roland McGrath [Thu, 10 Oct 2013 22:50:40 +0000 (22:50 +0000)]
ld/
* ldmisc.c (vfinfo): Use Boolean ? "" : ":" in place of ":" + Boolean.
It silences some compilers' warnings and is much less bizarre to read.
Roland McGrath [Thu, 10 Oct 2013 17:43:37 +0000 (17:43 +0000)]
opcodes/
* cr16-opc.c (REG): Cast NAME to 'reg' enum type to suppress
possible compiler warnings when the union's initializer is
actually meant for the 'preg' enum typed member.
* crx-opc.c (REG): Likewise.
Roland McGrath [Thu, 10 Oct 2013 17:19:49 +0000 (17:19 +0000)]
opcodes/
* v850-dis.c (v850_cacheop_codes, v850_prefop_codes):
Remove duplicate const qualifier.
Jan Beulich [Thu, 10 Oct 2013 12:22:41 +0000 (12:22 +0000)]
gas/
2013-10-10 Jan Beulich <jbeulich@suse.com>
* tc-i386-intel.c (i386_intel_simplify_register): Suppress base/index
swapping for bndmk, bndldx, and bndstx.
Will Newton [Thu, 10 Oct 2013 10:40:42 +0000 (10:40 +0000)]
gdb/aarch64-linux-tdep.c: Call linux_init_abi.
If we are running on a Linux platform we should call linux_init_abi
in order to get all the useful hooks it enables.
gdb/ChangeLog:
2013-10-10 Will Newton <will.newton@linaro.org>
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
linux_init_abi.
Andreas Krebbel [Thu, 10 Oct 2013 09:54:13 +0000 (09:54 +0000)]
2013-10-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
* lib/gdb.exp (gdb_core_cmd): Replace fixed string "re-load
generated corefile" by argument "$test".
Joel Brobecker [Thu, 10 Oct 2013 06:00:41 +0000 (06:00 +0000)]
Remove unnecessary @w{} in gdb.texinfo
gdb/doc/ChangeLog:
* gdb.texinfo (Connecting): Remove unnecessary @w{}.
Joel Brobecker [Thu, 10 Oct 2013 05:50:20 +0000 (05:50 +0000)]
Rename "set/show remotebaud" command into "set/show serial baud"
This patch renames the "set/show remotebaud" commands into
"set/show serial baud", and moves its implementation into serial.c.
It also moves the "baud_rate" global from top.c to serial.c, where
the new code is being added (the alternative was to add an include
of target.h).
And to facilitate the transition to the new setting name, this
patch also preserves the old commands, and marks them as deprecated
to alert the users of the change.
gdb/ChangeLog:
* cli/cli-cmds.c (show_baud_rate): Moved to serial.c as
serial_baud_show_cmd.
(_initialize_cli_cmds): Delete the code creating the
"set/show remotebaud" commands.
* serial.c (baud_rate): Move here from top.c.
(serial_baud_show_cmd): Move here from cli/cli-cmds.c.
(_initialize_serial): Create "set/show serial baud" commands.
Add "set/show remotebaud" command aliases.
* top.c (baud_rate): Moved to serial.c.
* NEWS: Document the new "set/show serial baud" commands,
replacing "set/show remotebaud".
gdb/doc/ChangeLog:
* gdb.texinfo: Replace "set remotebaud" and "show remotebaud"
by "set serial baud" and "show serial baud" (resp) throughout.
Alan Modra [Wed, 9 Oct 2013 23:00:04 +0000 (23:00 +0000)]
daily update