David Sterba [Thu, 23 Jul 2020 17:08:55 +0000 (19:08 +0200)]
btrfs: fix messages after changing compression level by remount
Reported by Forza on IRC that remounting with compression options does
not reflect the change in level, or at least it does not appear to do so
according to the messages:
mount -o compress=zstd:1 /dev/sda /mnt
mount -o remount,compress=zstd:15 /mnt
does not print the change to the level to syslog:
[ 41.366060] BTRFS info (device vda): use zstd compression, level 1
[ 41.368254] BTRFS info (device vda): disk space caching is enabled
[ 41.390429] BTRFS info (device vda): disk space caching is enabled
What really happens is that the message is lost but the level is actualy
changed.
There's another weird output, if compression is reset to 'no':
[ 45.413776] BTRFS info (device vda): use no compression, level 4
To fix that, save the previous compression level and print the message
in that case too and use separate message for 'no' compression.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Mon, 27 Jul 2020 14:28:05 +0000 (10:28 -0400)]
btrfs: only search for left_info if there is no right_info in try_merge_free_space
In try_to_merge_free_space we attempt to find entries to the left and
right of the entry we are adding to see if they can be merged. We
search for an entry past our current info (saved into right_info), and
then if right_info exists and it has a rb_prev() we save the rb_prev()
into left_info.
However there's a slight problem in the case that we have a right_info,
but no entry previous to that entry. At that point we will search for
an entry just before the info we're attempting to insert. This will
simply find right_info again, and assign it to left_info, making them
both the same pointer.
Now if right_info _can_ be merged with the range we're inserting, we'll
add it to the info and free right_info. However further down we'll
access left_info, which was right_info, and thus get a use-after-free.
Fix this by only searching for the left entry if we don't find a right
entry at all.
The CVE referenced had a specially crafted file system that could
trigger this use-after-free. However with the tree checker improvements
we no longer trigger the conditions for the UAF. But the original
conditions still apply, hence this fix.
Reference: CVE-2019-19448
Fixes:
963030817060 ("Btrfs: use hybrid extents+bitmap rb tree for free space")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 28 Jul 2020 08:39:26 +0000 (16:39 +0800)]
btrfs: inode: fix NULL pointer dereference if inode doesn't need compression
[BUG]
There is a bug report of NULL pointer dereference caused in
compress_file_extent():
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Workqueue: btrfs-delalloc btrfs_delalloc_helper [btrfs]
NIP [
c008000006dd4d34] compress_file_range.constprop.41+0x75c/0x8a0 [btrfs]
LR [
c008000006dd4d1c] compress_file_range.constprop.41+0x744/0x8a0 [btrfs]
Call Trace:
[
c000000c69093b00] [
c008000006dd4d1c] compress_file_range.constprop.41+0x744/0x8a0 [btrfs] (unreliable)
[
c000000c69093bd0] [
c008000006dd4ebc] async_cow_start+0x44/0xa0 [btrfs]
[
c000000c69093c10] [
c008000006e14824] normal_work_helper+0xdc/0x598 [btrfs]
[
c000000c69093c80] [
c0000000001608c0] process_one_work+0x2c0/0x5b0
[
c000000c69093d10] [
c000000000160c38] worker_thread+0x88/0x660
[
c000000c69093db0] [
c00000000016b55c] kthread+0x1ac/0x1c0
[
c000000c69093e20] [
c00000000000b660] ret_from_kernel_thread+0x5c/0x7c
---[ end trace
f16954aa20d822f6 ]---
[CAUSE]
For the following execution route of compress_file_range(), it's
possible to hit NULL pointer dereference:
compress_file_extent()
|- pages = NULL;
|- start = async_chunk->start = 0;
|- end = async_chunk = 4095;
|- nr_pages = 1;
|- inode_need_compress() == false; <<< Possible, see later explanation
| Now, we have nr_pages = 1, pages = NULL
|- cont:
|- ret = cow_file_range_inline();
|- if (ret <= 0) {
|- for (i = 0; i < nr_pages; i++) {
|- WARN_ON(pages[i]->mapping); <<< Crash
To enter above call execution branch, we need the following race:
Thread 1 (chattr) | Thread 2 (writeback)
--------------------------+------------------------------
| btrfs_run_delalloc_range
| |- inode_need_compress = true
| |- cow_file_range_async()
btrfs_ioctl_set_flag() |
|- binode_flags |= |
BTRFS_INODE_NOCOMPRESS |
| compress_file_range()
| |- inode_need_compress = false
| |- nr_page = 1 while pages = NULL
| | Then hit the crash
[FIX]
This patch will fix it by checking @pages before doing accessing it.
This patch is only designed as a hot fix and easy to backport.
More elegant fix may make btrfs only check inode_need_compress() once to
avoid such race, but that would be another story.
Reported-by: Luciano Chavez <chavez@us.ibm.com>
Fixes:
4d3a800ebb12 ("btrfs: merge nr_pages input and output parameter in compress_pages")
CC: stable@vger.kernel.org # 4.14.x: cecc8d9038d16: btrfs: Move free_pages_out label in inline extent handling branch in compress_file_range
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 22 Jul 2020 11:29:01 +0000 (12:29 +0100)]
btrfs: do not set the full sync flag on the inode during page release
When removing an extent map at try_release_extent_mapping(), called through
the page release callback (btrfs_releasepage()), we always set the full
sync flag on the inode, which forces the next fsync to use a slower code
path.
This hurts performance for workloads that dirty an amount of data that
exceeds or is very close to the system's RAM memory and do frequent fsync
operations (like database servers can for example). In particular if there
are concurrent fsyncs against different files, by falling back to a full
fsync we do a lot more checksum lookups in the checksums btree, as we do
it for all the extents created in the current transaction, instead of only
the new ones since the last fsync. These checksums lookups not only take
some time but, more importantly, they also cause contention on the
checksums btree locks due to the concurrency with checksum insertions in
the btree by ordered extents from other inodes.
We actually don't need to set the full sync flag on the inode, because we
only remove extent maps that are in the list of modified extents if they
were created in a past transaction, in which case an fsync skips them as
it's pointless to log them. So stop setting the full fsync flag on the
inode whenever we remove an extent map.
This patch is part of a patchset that consists of 3 patches, which have
the following subjects:
1/3 btrfs: fix race between page release and a fast fsync
2/3 btrfs: release old extent maps during page release
3/3 btrfs: do not set the full sync flag on the inode during page release
Performance tests were ran against a branch (misc-next) containing the
whole patchset. The test exercises a workload where there are multiple
processes writing to files and fsyncing them (each writing and fsyncing
its own file), and in total the amount of data dirtied ranges from 2x to
4x the system's RAM memory (16GiB), so that the page release callback is
invoked frequently.
The following script, using fio, was used to perform the tests:
$ cat test-fsync.sh
#!/bin/bash
DEV=/dev/sdk
MNT=/mnt/sdk
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-d single -m single"
if [ $# -ne 3 ]; then
echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ"
exit 1
fi
NUM_JOBS=$1
FILE_SIZE=$2
FSYNC_FREQ=$3
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=write
fsync=$FSYNC_FREQ
fallocate=none
group_reporting=1
direct=0
bs=64k
ioengine=sync
size=$FILE_SIZE
directory=$MNT
numjobs=$NUM_JOBS
thread
EOF
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
mkfs.btrfs -f $MKFS_OPTIONS $DEV &> /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
The tests were performed for different numbers of jobs, file sizes and
fsync frequency. A qemu VM using kvm was used, with 8 cores (the host has
12 cores, with cpu governance set to performance mode on all cores), 16GiB
of ram (the host has 64GiB) and using a NVMe device directly (without an
intermediary filesystem in the host). While running the tests, the host
was not used for anything else, to avoid disturbing the tests.
The obtained results were the following, and the last line printed by
fio is pasted (includes aggregated throughput and test run time).
*****************************************************
**** 1 job, 32GiB file, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=29.1MiB/s (30.5MB/s), 29.1MiB/s-29.1MiB/s (30.5MB/s-30.5MB/s), io=32.0GiB (34.4GB), run=1127557-1127557msec
After patchset:
WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=32.0GiB (34.4GB), run=1119042-1119042msec
(+0.7% throughput, -0.8% run time)
*****************************************************
**** 2 jobs, 16GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=33.5MiB/s (35.1MB/s), 33.5MiB/s-33.5MiB/s (35.1MB/s-35.1MB/s), io=32.0GiB (34.4GB), run=979000-979000msec
After patchset:
WRITE: bw=39.9MiB/s (41.8MB/s), 39.9MiB/s-39.9MiB/s (41.8MB/s-41.8MB/s), io=32.0GiB (34.4GB), run=821283-821283msec
(+19.1% throughput, -16.1% runtime)
*****************************************************
**** 4 jobs, 8GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=52.1MiB/s (54.6MB/s), 52.1MiB/s-52.1MiB/s (54.6MB/s-54.6MB/s), io=32.0GiB (34.4GB), run=629130-629130msec
After patchset:
WRITE: bw=71.8MiB/s (75.3MB/s), 71.8MiB/s-71.8MiB/s (75.3MB/s-75.3MB/s), io=32.0GiB (34.4GB), run=456357-456357msec
(+37.8% throughput, -27.5% runtime)
*****************************************************
**** 8 jobs, 4GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=76.1MiB/s (79.8MB/s), 76.1MiB/s-76.1MiB/s (79.8MB/s-79.8MB/s), io=32.0GiB (34.4GB), run=430708-430708msec
After patchset:
WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=245458-245458msec
(+74.7% throughput, -43.0% run time)
*****************************************************
**** 16 jobs, 2GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=74.7MiB/s (78.3MB/s), 74.7MiB/s-74.7MiB/s (78.3MB/s-78.3MB/s), io=32.0GiB (34.4GB), run=438625-438625msec
After patchset:
WRITE: bw=184MiB/s (193MB/s), 184MiB/s-184MiB/s (193MB/s-193MB/s), io=32.0GiB (34.4GB), run=177864-177864msec
(+146.3% throughput, -59.5% run time)
*****************************************************
**** 32 jobs, 2GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=72.6MiB/s (76.1MB/s), 72.6MiB/s-72.6MiB/s (76.1MB/s-76.1MB/s), io=64.0GiB (68.7GB), run=902615-902615msec
After patchset:
WRITE: bw=227MiB/s (238MB/s), 227MiB/s-227MiB/s (238MB/s-238MB/s), io=64.0GiB (68.7GB), run=288936-288936msec
(+212.7% throughput, -68.0% run time)
*****************************************************
**** 64 jobs, 1GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=98.8MiB/s (104MB/s), 98.8MiB/s-98.8MiB/s (104MB/s-104MB/s), io=64.0GiB (68.7GB), run=663126-663126msec
After patchset:
WRITE: bw=294MiB/s (308MB/s), 294MiB/s-294MiB/s (308MB/s-308MB/s), io=64.0GiB (68.7GB), run=222940-222940msec
(+197.6% throughput, -66.4% run time)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 22 Jul 2020 11:28:52 +0000 (12:28 +0100)]
btrfs: release old extent maps during page release
When removing an extent map at try_release_extent_mapping(), called through
the page release callback (btrfs_releasepage()), we never release an extent
map that is in the list of modified extents. This is to prevent races with
a concurrent fsync using the fast path, which could lead to not logging an
extent created in the current transaction.
However we can safely remove an extent map created in a past transaction
that is still in the list of modified extents (because no one fsynced yet
the inode after that transaction got commited), because such extents are
skipped during an fsync as it is pointless to log them. This change does
that.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 22 Jul 2020 11:28:37 +0000 (12:28 +0100)]
btrfs: fix race between page release and a fast fsync
When releasing an extent map, done through the page release callback, we
can race with an ongoing fast fsync and cause the fsync to miss a new
extent and not log it. The steps for this to happen are the following:
1) A page is dirtied for some inode I;
2) Writeback for that page is triggered by a path other than fsync, for
example by the system due to memory pressure;
3) When the ordered extent for the extent (a single 4K page) finishes,
we unpin the corresponding extent map and set its generation to N,
the current transaction's generation;
4) The btrfs_releasepage() callback is invoked by the system due to
memory pressure for that no longer dirty page of inode I;
5) At the same time, some task calls fsync on inode I, joins transaction
N, and at btrfs_log_inode() it sees that the inode does not have the
full sync flag set, so we proceed with a fast fsync. But before we get
into btrfs_log_changed_extents() and lock the inode's extent map tree:
6) Through btrfs_releasepage() we end up at try_release_extent_mapping()
and we remove the extent map for the new 4Kb extent, because it is
neither pinned anymore nor locked. By calling remove_extent_mapping(),
we remove the extent map from the list of modified extents, since the
extent map does not have the logging flag set. We unlock the inode's
extent map tree;
7) The task doing the fast fsync now enters btrfs_log_changed_extents(),
locks the inode's extent map tree and iterates its list of modified
extents, which no longer has the 4Kb extent in it, so it does not log
the extent;
8) The fsync finishes;
9) Before transaction N is committed, a power failure happens. After
replaying the log, the 4K extent of inode I will be missing, since
it was not logged due to the race with try_release_extent_mapping().
So fix this by teaching try_release_extent_mapping() to not remove an
extent map if it's still in the list of modified extents.
Fixes:
ff44c6e36dc9dc ("Btrfs: do not hold the write_lock on the extent tree while logging")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Wed, 22 Jul 2020 15:18:04 +0000 (00:18 +0900)]
btrfs: open-code remount flag setting in btrfs_remount
When we're (re)mounting a btrfs filesystem we set the
BTRFS_FS_STATE_REMOUNTING state in fs_info to serialize against async
reclaim or defrags.
This flag is set in btrfs_remount_prepare() called by btrfs_remount().
As btrfs_remount_prepare() does nothing but setting this flag and
doesn't have a second caller, we can just open-code the flag setting in
btrfs_remount().
Similarly do for so clearing of the flag by moving it out of
btrfs_remount_cleanup() into btrfs_remount() to be symmetrical.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 21 Jul 2020 14:48:46 +0000 (10:48 -0400)]
btrfs: if we're restriping, use the target restripe profile
Previously we depended on some weird behavior in our chunk allocator to
force the allocation of new stripes, so by the time we got to doing the
reduce we would usually already have a chunk with the proper target.
However that behavior causes other problems and needs to be removed.
First however we need to remove this check to only restripe if we
already have those available profiles, because if we're allocating our
first chunk it obviously will not be available. Simply use the target
as specified, and if that fails it'll be because we're out of space.
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 21 Jul 2020 14:48:45 +0000 (10:48 -0400)]
btrfs: don't adjust bg flags and use default allocation profiles
btrfs/061 has been failing consistently for me recently with a
transaction abort. We run out of space in the system chunk array, which
means we've allocated way too many system chunks than we need.
Chris added this a long time ago for balance as a poor mans restriping.
If you had a single disk and then added another disk and then did a
balance, update_block_group_flags would then figure out which RAID level
you needed.
Fast forward to today and we have restriping behavior, so we can
explicitly tell the fs that we're trying to change the raid level. This
is accomplished through the normal get_alloc_profile path.
Furthermore this code actually causes btrfs/061 to fail, because we do
things like mkfs -m dup -d single with multiple devices. This trips
this check
alloc_flags = update_block_group_flags(fs_info, cache->flags);
if (alloc_flags != cache->flags) {
ret = btrfs_chunk_alloc(trans, alloc_flags, CHUNK_ALLOC_FORCE);
in btrfs_inc_block_group_ro. Because we're balancing and scrubbing, but
not actually restriping, we keep forcing chunk allocation of RAID1
chunks. This eventually causes us to run out of system space and the
file system aborts and flips read only.
We don't need this poor mans restriping any more, simply use the normal
get_alloc_profile helper, which will get the correct alloc_flags and
thus make the right decision for chunk allocation. This keeps us from
allocating a billion system chunks and falling over.
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 17 Jul 2020 19:12:29 +0000 (15:12 -0400)]
btrfs: fix lockdep splat from btrfs_dump_space_info
When running with -o enospc_debug you can get the following splat if one
of the dump_space_info's trip
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc5+ #20 Tainted: G OE
------------------------------------------------------
dd/563090 is trying to acquire lock:
ffff9e7dbf4f1e18 (&ctl->tree_lock){+.+.}-{2:2}, at: btrfs_dump_free_space+0x2b/0xa0 [btrfs]
but task is already holding lock:
ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&cache->lock){+.+.}-{2:2}:
_raw_spin_lock+0x25/0x30
btrfs_add_reserved_bytes+0x3c/0x3c0 [btrfs]
find_free_extent+0x7ef/0x13b0 [btrfs]
btrfs_reserve_extent+0x9b/0x180 [btrfs]
btrfs_alloc_tree_block+0xc1/0x340 [btrfs]
alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs]
__btrfs_cow_block+0x122/0x530 [btrfs]
btrfs_cow_block+0x106/0x210 [btrfs]
commit_cowonly_roots+0x55/0x300 [btrfs]
btrfs_commit_transaction+0x4ed/0xac0 [btrfs]
sync_filesystem+0x74/0x90
generic_shutdown_super+0x22/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x36/0x70
cleanup_mnt+0x104/0x160
task_work_run+0x5f/0x90
__prepare_exit_to_usermode+0x1bd/0x1c0
do_syscall_64+0x5e/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #2 (&space_info->lock){+.+.}-{2:2}:
_raw_spin_lock+0x25/0x30
btrfs_block_rsv_release+0x1a6/0x3f0 [btrfs]
btrfs_inode_rsv_release+0x4f/0x170 [btrfs]
btrfs_clear_delalloc_extent+0x155/0x480 [btrfs]
clear_state_bit+0x81/0x1a0 [btrfs]
__clear_extent_bit+0x25c/0x5d0 [btrfs]
clear_extent_bit+0x15/0x20 [btrfs]
btrfs_invalidatepage+0x2b7/0x3c0 [btrfs]
truncate_cleanup_page+0x47/0xe0
truncate_inode_pages_range+0x238/0x840
truncate_pagecache+0x44/0x60
btrfs_setattr+0x202/0x5e0 [btrfs]
notify_change+0x33b/0x490
do_truncate+0x76/0xd0
path_openat+0x687/0xa10
do_filp_open+0x91/0x100
do_sys_openat2+0x215/0x2d0
do_sys_open+0x44/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&tree->lock#2){+.+.}-{2:2}:
_raw_spin_lock+0x25/0x30
find_first_extent_bit+0x32/0x150 [btrfs]
write_pinned_extent_entries.isra.0+0xc5/0x100 [btrfs]
__btrfs_write_out_cache+0x172/0x480 [btrfs]
btrfs_write_out_cache+0x7a/0xf0 [btrfs]
btrfs_write_dirty_block_groups+0x286/0x3b0 [btrfs]
commit_cowonly_roots+0x245/0x300 [btrfs]
btrfs_commit_transaction+0x4ed/0xac0 [btrfs]
close_ctree+0xf9/0x2f5 [btrfs]
generic_shutdown_super+0x6c/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x36/0x70
cleanup_mnt+0x104/0x160
task_work_run+0x5f/0x90
__prepare_exit_to_usermode+0x1bd/0x1c0
do_syscall_64+0x5e/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&ctl->tree_lock){+.+.}-{2:2}:
__lock_acquire+0x1240/0x2460
lock_acquire+0xab/0x360
_raw_spin_lock+0x25/0x30
btrfs_dump_free_space+0x2b/0xa0 [btrfs]
btrfs_dump_space_info+0xf4/0x120 [btrfs]
btrfs_reserve_extent+0x176/0x180 [btrfs]
__btrfs_prealloc_file_range+0x145/0x550 [btrfs]
cache_save_setup+0x28d/0x3b0 [btrfs]
btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs]
btrfs_commit_transaction+0xcc/0xac0 [btrfs]
btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs]
btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs]
btrfs_file_write_iter+0x3cf/0x610 [btrfs]
new_sync_write+0x11e/0x1b0
vfs_write+0x1c9/0x200
ksys_write+0x68/0xe0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Chain exists of:
&ctl->tree_lock --> &space_info->lock --> &cache->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&cache->lock);
lock(&space_info->lock);
lock(&cache->lock);
lock(&ctl->tree_lock);
*** DEADLOCK ***
6 locks held by dd/563090:
#0:
ffff9e7e21d18448 (sb_writers#14){.+.+}-{0:0}, at: vfs_write+0x195/0x200
#1:
ffff9e7dd0410ed8 (&sb->s_type->i_mutex_key#19){++++}-{3:3}, at: btrfs_file_write_iter+0x86/0x610 [btrfs]
#2:
ffff9e7e21d18638 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40b/0x5b0 [btrfs]
#3:
ffff9e7e1f05d688 (&cur_trans->cache_write_mutex){+.+.}-{3:3}, at: btrfs_start_dirty_block_groups+0x158/0x4f0 [btrfs]
#4:
ffff9e7e2284ddb8 (&space_info->groups_sem){++++}-{3:3}, at: btrfs_dump_space_info+0x69/0x120 [btrfs]
#5:
ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs]
stack backtrace:
CPU: 3 PID: 563090 Comm: dd Tainted: G OE 5.8.0-rc5+ #20
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
Call Trace:
dump_stack+0x96/0xd0
check_noncircular+0x162/0x180
__lock_acquire+0x1240/0x2460
? wake_up_klogd.part.0+0x30/0x40
lock_acquire+0xab/0x360
? btrfs_dump_free_space+0x2b/0xa0 [btrfs]
_raw_spin_lock+0x25/0x30
? btrfs_dump_free_space+0x2b/0xa0 [btrfs]
btrfs_dump_free_space+0x2b/0xa0 [btrfs]
btrfs_dump_space_info+0xf4/0x120 [btrfs]
btrfs_reserve_extent+0x176/0x180 [btrfs]
__btrfs_prealloc_file_range+0x145/0x550 [btrfs]
? btrfs_qgroup_reserve_data+0x1d/0x60 [btrfs]
cache_save_setup+0x28d/0x3b0 [btrfs]
btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs]
btrfs_commit_transaction+0xcc/0xac0 [btrfs]
? start_transaction+0xe0/0x5b0 [btrfs]
btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs]
btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs]
? ktime_get_coarse_real_ts64+0xa8/0xd0
? trace_hardirqs_on+0x1c/0xe0
btrfs_file_write_iter+0x3cf/0x610 [btrfs]
new_sync_write+0x11e/0x1b0
vfs_write+0x1c9/0x200
ksys_write+0x68/0xe0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is because we're holding the block_group->lock while trying to dump
the free space cache. However we don't need this lock, we just need it
to read the values for the printk, so move the free space cache dumping
outside of the block group lock.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 17 Jul 2020 19:12:28 +0000 (15:12 -0400)]
btrfs: move the chunk_mutex in btrfs_read_chunk_tree
We are currently getting this lockdep splat in btrfs/161:
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc5+ #20 Tainted: G E
------------------------------------------------------
mount/678048 is trying to acquire lock:
ffff9b769f15b6e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: clone_fs_devices+0x4d/0x170 [btrfs]
but task is already holding lock:
ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x8b/0x8f0
btrfs_init_new_device+0x2d2/0x1240 [btrfs]
btrfs_ioctl+0x1de/0x2d20 [btrfs]
ksys_ioctl+0x87/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__lock_acquire+0x1240/0x2460
lock_acquire+0xab/0x360
__mutex_lock+0x8b/0x8f0
clone_fs_devices+0x4d/0x170 [btrfs]
btrfs_read_chunk_tree+0x330/0x800 [btrfs]
open_ctree+0xb7c/0x18ce [btrfs]
btrfs_mount_root.cold+0x13/0xfa [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x7de/0xb30
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
*** DEADLOCK ***
3 locks held by mount/678048:
#0:
ffff9b75ff5fb0e0 (&type->s_umount_key#63/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380
#1:
ffffffffc0c2fbc8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x54/0x800 [btrfs]
#2:
ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]
stack backtrace:
CPU: 2 PID: 678048 Comm: mount Tainted: G E 5.8.0-rc5+ #20
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
Call Trace:
dump_stack+0x96/0xd0
check_noncircular+0x162/0x180
__lock_acquire+0x1240/0x2460
? asm_sysvec_apic_timer_interrupt+0x12/0x20
lock_acquire+0xab/0x360
? clone_fs_devices+0x4d/0x170 [btrfs]
__mutex_lock+0x8b/0x8f0
? clone_fs_devices+0x4d/0x170 [btrfs]
? rcu_read_lock_sched_held+0x52/0x60
? cpumask_next+0x16/0x20
? module_assert_mutex_or_preempt+0x14/0x40
? __module_address+0x28/0xf0
? clone_fs_devices+0x4d/0x170 [btrfs]
? static_obj+0x4f/0x60
? lockdep_init_map_waits+0x43/0x200
? clone_fs_devices+0x4d/0x170 [btrfs]
clone_fs_devices+0x4d/0x170 [btrfs]
btrfs_read_chunk_tree+0x330/0x800 [btrfs]
open_ctree+0xb7c/0x18ce [btrfs]
? super_setup_bdi_name+0x79/0xd0
btrfs_mount_root.cold+0x13/0xfa [btrfs]
? vfs_parse_fs_string+0x84/0xb0
? rcu_read_lock_sched_held+0x52/0x60
? kfree+0x2b5/0x310
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
? cred_has_capability+0x7c/0x120
? rcu_read_lock_sched_held+0x52/0x60
? legacy_get_tree+0x30/0x50
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x7de/0xb30
? memdup_user+0x4e/0x90
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is because btrfs_read_chunk_tree() can come upon DEV_EXTENT's and
then read the device, which takes the device_list_mutex. The
device_list_mutex needs to be taken before the chunk_mutex, so this is a
problem. We only really need the chunk mutex around adding the chunk,
so move the mutex around read_one_chunk.
An argument could be made that we don't even need the chunk_mutex here
as it's during mount, and we are protected by various other locks.
However we already have special rules for ->device_list_mutex, and I'd
rather not have another special case for ->chunk_mutex.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 17 Jul 2020 19:12:27 +0000 (15:12 -0400)]
btrfs: open device without device_list_mutex
There's long existed a lockdep splat because we open our bdev's under
the ->device_list_mutex at mount time, which acquires the bd_mutex.
Usually this goes unnoticed, but if you do loopback devices at all
suddenly the bd_mutex comes with a whole host of other dependencies,
which results in the splat when you mount a btrfs file system.
======================================================
WARNING: possible circular locking dependency detected
5.8.0-0.rc3.1.fc33.x86_64+debug #1 Not tainted
------------------------------------------------------
systemd-journal/509 is trying to acquire lock:
ffff970831f84db0 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x44/0x70 [btrfs]
but task is already holding lock:
ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (sb_pagefaults){.+.+}-{0:0}:
__sb_start_write+0x13e/0x220
btrfs_page_mkwrite+0x59/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
-> #5 (&mm->mmap_lock#2){++++}-{3:3}:
__might_fault+0x60/0x80
_copy_from_user+0x20/0xb0
get_sg_io_hdr+0x9a/0xb0
scsi_cmd_ioctl+0x1ea/0x2f0
cdrom_ioctl+0x3c/0x12b4
sr_block_ioctl+0xa4/0xd0
block_ioctl+0x3f/0x50
ksys_ioctl+0x82/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #4 (&cd->lock){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
sr_block_open+0xa2/0x180
__blkdev_get+0xdd/0x550
blkdev_get+0x38/0x150
do_dentry_open+0x16b/0x3e0
path_openat+0x3c9/0xa00
do_filp_open+0x75/0x100
do_sys_openat2+0x8a/0x140
__x64_sys_openat+0x46/0x70
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #3 (&bdev->bd_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
__blkdev_get+0x6a/0x550
blkdev_get+0x85/0x150
blkdev_get_by_path+0x2c/0x70
btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs]
open_fs_devices+0x88/0x240 [btrfs]
btrfs_open_devices+0x92/0xa0 [btrfs]
btrfs_mount_root+0x250/0x490 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x119/0x380 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x8c6/0xca0
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_run_dev_stats+0x36/0x420 [btrfs]
commit_cowonly_roots+0x91/0x2d0 [btrfs]
btrfs_commit_transaction+0x4e6/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_commit_transaction+0x48e/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}:
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
__mutex_lock+0x7b/0x820
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
other info that might help us debug this:
Chain exists of:
&fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sb_pagefaults);
lock(&mm->mmap_lock#2);
lock(sb_pagefaults);
lock(&fs_info->reloc_mutex);
*** DEADLOCK ***
3 locks held by systemd-journal/509:
#0:
ffff97083bdec8b8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x12e/0x4b0
#1:
ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
#2:
ffff97083144d6a8 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3f8/0x500 [btrfs]
stack backtrace:
CPU: 0 PID: 509 Comm: systemd-journal Not tainted 5.8.0-0.rc3.1.fc33.x86_64+debug #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack+0x92/0xc8
check_noncircular+0x134/0x150
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
__mutex_lock+0x7b/0x820
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? kvm_sched_clock_read+0x14/0x30
? sched_clock+0x5/0x10
? sched_clock_cpu+0xc/0xb0
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
? sched_clock+0x5/0x10
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fa3972fdbfe
Code: Bad RIP value.
Fix this by not holding the ->device_list_mutex at this point. The
device_list_mutex exists to protect us from modifying the device list
while the file system is running.
However it can also be modified by doing a scan on a device. But this
action is specifically protected by the uuid_mutex, which we are holding
here. We cannot race with opening at this point because we have the
->s_mount lock held during the mount. Not having the
->device_list_mutex here is perfectly safe as we're not going to change
the devices at this point.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add some comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 21 Jul 2020 14:17:50 +0000 (10:17 -0400)]
btrfs: sysfs: use NOFS for device creation
Dave hit this splat during testing btrfs/078:
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc6-default+ #1191 Not tainted
------------------------------------------------------
kswapd0/75 is trying to acquire lock:
ffffa040e9d04ff8 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
but task is already holding lock:
ffffffff8b0c8040 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x56f/0xaa0
lock_acquire+0xa3/0x440
fs_reclaim_acquire.part.0+0x25/0x30
__kmalloc_track_caller+0x49/0x330
kstrdup+0x2e/0x60
__kernfs_new_node.constprop.0+0x44/0x250
kernfs_new_node+0x25/0x50
kernfs_create_link+0x34/0xa0
sysfs_do_create_link_sd+0x5e/0xd0
btrfs_sysfs_add_devices_dir+0x65/0x100 [btrfs]
btrfs_init_new_device+0x44c/0x12b0 [btrfs]
btrfs_ioctl+0xc3c/0x25c0 [btrfs]
ksys_ioctl+0x68/0xa0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0xe0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__lock_acquire+0x56f/0xaa0
lock_acquire+0xa3/0x440
__mutex_lock+0xa0/0xaf0
btrfs_chunk_alloc+0x137/0x3e0 [btrfs]
find_free_extent+0xb44/0xfb0 [btrfs]
btrfs_reserve_extent+0x9b/0x180 [btrfs]
btrfs_alloc_tree_block+0xc1/0x350 [btrfs]
alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs]
__btrfs_cow_block+0x143/0x7a0 [btrfs]
btrfs_cow_block+0x15f/0x310 [btrfs]
push_leaf_right+0x150/0x240 [btrfs]
split_leaf+0x3cd/0x6d0 [btrfs]
btrfs_search_slot+0xd14/0xf70 [btrfs]
btrfs_insert_empty_items+0x64/0xc0 [btrfs]
__btrfs_commit_inode_delayed_items+0xb2/0x840 [btrfs]
btrfs_async_run_delayed_root+0x10e/0x1d0 [btrfs]
btrfs_work_helper+0x2f9/0x650 [btrfs]
process_one_work+0x22c/0x600
worker_thread+0x50/0x3b0
kthread+0x137/0x150
ret_from_fork+0x1f/0x30
-> #0 (&delayed_node->mutex){+.+.}-{3:3}:
check_prev_add+0x98/0xa20
validate_chain+0xa8c/0x2a00
__lock_acquire+0x56f/0xaa0
lock_acquire+0xa3/0x440
__mutex_lock+0xa0/0xaf0
__btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
btrfs_evict_inode+0x3bf/0x560 [btrfs]
evict+0xd6/0x1c0
dispose_list+0x48/0x70
prune_icache_sb+0x54/0x80
super_cache_scan+0x121/0x1a0
do_shrink_slab+0x175/0x420
shrink_slab+0xb1/0x2e0
shrink_node+0x192/0x600
balance_pgdat+0x31f/0x750
kswapd+0x206/0x510
kthread+0x137/0x150
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> &fs_info->chunk_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&fs_info->chunk_mutex);
lock(fs_reclaim);
lock(&delayed_node->mutex);
*** DEADLOCK ***
3 locks held by kswapd0/75:
#0:
ffffffff8b0c8040 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
#1:
ffffffff8b0b50b8 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x54/0x2e0
#2:
ffffa040e057c0e8 (&type->s_umount_key#26){++++}-{3:3}, at: trylock_super+0x16/0x50
stack backtrace:
CPU: 2 PID: 75 Comm: kswapd0 Not tainted 5.8.0-rc6-default+ #1191
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0x78/0xa0
check_noncircular+0x16f/0x190
check_prev_add+0x98/0xa20
validate_chain+0xa8c/0x2a00
__lock_acquire+0x56f/0xaa0
lock_acquire+0xa3/0x440
? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
__mutex_lock+0xa0/0xaf0
? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
? __lock_acquire+0x56f/0xaa0
? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
? lock_acquire+0xa3/0x440
? btrfs_evict_inode+0x138/0x560 [btrfs]
? btrfs_evict_inode+0x2fe/0x560 [btrfs]
? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
__btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
btrfs_evict_inode+0x3bf/0x560 [btrfs]
evict+0xd6/0x1c0
dispose_list+0x48/0x70
prune_icache_sb+0x54/0x80
super_cache_scan+0x121/0x1a0
do_shrink_slab+0x175/0x420
shrink_slab+0xb1/0x2e0
shrink_node+0x192/0x600
balance_pgdat+0x31f/0x750
kswapd+0x206/0x510
? _raw_spin_unlock_irqrestore+0x3e/0x50
? finish_wait+0x90/0x90
? balance_pgdat+0x750/0x750
kthread+0x137/0x150
? kthread_stop+0x2a0/0x2a0
ret_from_fork+0x1f/0x30
This is because we're holding the chunk_mutex while adding this device
and adding its sysfs entries. We actually hold different locks in
different places when calling this function, the dev_replace semaphore
for instance in dev replace, so instead of moving this call around
simply wrap it's operations in NOFS.
CC: stable@vger.kernel.org # 4.14+
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 21 Jul 2020 14:38:37 +0000 (10:38 -0400)]
btrfs: return EROFS for BTRFS_FS_STATE_ERROR cases
Eric reported seeing this message while running generic/475
BTRFS: error (device dm-3) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted
Full stack trace:
BTRFS: error (device dm-0) in btrfs_commit_transaction:2323: errno=-5 IO failure (Error while writing out transaction)
BTRFS info (device dm-0): forced readonly
BTRFS warning (device dm-0): Skipping commit of aborted transaction.
------------[ cut here ]------------
BTRFS: error (device dm-0) in cleanup_transaction:1894: errno=-5 IO failure
BTRFS: Transaction aborted (error -117)
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6480 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6488 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6490 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6498 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64c0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85e8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85f0 len 4096 err no 10
WARNING: CPU: 3 PID: 23985 at fs/btrfs/tree-log.c:3084 btrfs_sync_log+0xbc8/0xd60 [btrfs]
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4288 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4290 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4298 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42d0 len 4096 err no 10
CPU: 3 PID: 23985 Comm: fsstress Tainted: G W L 5.8.0-rc4-default+ #1181
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
RIP: 0010:btrfs_sync_log+0xbc8/0xd60 [btrfs]
RSP: 0018:
ffff909a44d17bd0 EFLAGS:
00010286
RAX:
0000000000000000 RBX:
0000000000000001 RCX:
0000000000000001
RDX:
ffff8f3be41cb940 RSI:
ffffffffb0108d2b RDI:
ffffffffb0108ff7
RBP:
ffff909a44d17e70 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000037988 R12:
ffff8f3bd20e4000
R13:
ffff8f3bd20e4428 R14:
00000000ffffff8b R15:
ffff909a44d17c70
FS:
00007f6a6ed3fb80(0000) GS:
ffff8f3c3dc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f6a6ed3e000 CR3:
00000000525c0003 CR4:
0000000000160ee0
Call Trace:
? finish_wait+0x90/0x90
? __mutex_unlock_slowpath+0x45/0x2a0
? lock_acquire+0xa3/0x440
? lockref_put_or_lock+0x9/0x30
? dput+0x20/0x4a0
? dput+0x20/0x4a0
? do_raw_spin_unlock+0x4b/0xc0
? _raw_spin_unlock+0x1f/0x30
btrfs_sync_file+0x335/0x490 [btrfs]
do_fsync+0x38/0x70
__x64_sys_fsync+0x10/0x20
do_syscall_64+0x50/0xe0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f6a6ef1b6e3
Code: Bad RIP value.
RSP: 002b:
00007ffd01e20038 EFLAGS:
00000246 ORIG_RAX:
000000000000004a
RAX:
ffffffffffffffda RBX:
000000000007a120 RCX:
00007f6a6ef1b6e3
RDX:
00007ffd01e1ffa0 RSI:
00007ffd01e1ffa0 RDI:
0000000000000003
RBP:
0000000000000003 R08:
0000000000000001 R09:
00007ffd01e2004c
R10:
0000000000000000 R11:
0000000000000246 R12:
000000000000009f
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
irq event stamp: 0
hardirqs last enabled at (0): [<
0000000000000000>] 0x0
hardirqs last disabled at (0): [<
ffffffffb007fe0b>] copy_process+0x67b/0x1b00
softirqs last enabled at (0): [<
ffffffffb007fe0b>] copy_process+0x67b/0x1b00
softirqs last disabled at (0): [<
0000000000000000>] 0x0
---[ end trace
af146e0e38433456 ]---
BTRFS: error (device dm-0) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted
This ret came from btrfs_write_marked_extents(). If we get an aborted
transaction via EIO before, we'll see it in btree_write_cache_pages()
and return EUCLEAN, which gets printed as "Filesystem corrupted".
Except we shouldn't be returning EUCLEAN here, we need to be returning
EROFS because EUCLEAN is reserved for actual corruption, not IO errors.
We are inconsistent about our handling of BTRFS_FS_STATE_ERROR
elsewhere, but we want to use EROFS for this particular case. The
original transaction abort has the real error code for why we ended up
with an aborted transaction, all subsequent actions just need to return
EROFS because they may not have a trans handle and have no idea about
the original cause of the abort.
After patch "btrfs: don't WARN if we abort a transaction with EROFS" the
stacktrace will not be dumped either.
Reported-by: Eric Sandeen <esandeen@redhat.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add full test stacktrace ]
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 21 Jul 2020 15:24:28 +0000 (11:24 -0400)]
btrfs: document special case error codes for fs errors
We've had some discussions about what to do in certain scenarios for
error codes, specifically EUCLEAN and EROFS. Document these near the
error handling code so its clear what their intentions are.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 21 Jul 2020 15:24:27 +0000 (11:24 -0400)]
btrfs: don't WARN if we abort a transaction with EROFS
If we got some sort of corruption via a read and call
btrfs_handle_fs_error() we'll set BTRFS_FS_STATE_ERROR on the fs and
complain. If a subsequent trans handle trips over this it'll get EROFS
and then abort. However at that point we're not aborting for the
original reason, we're aborting because we've been flipped read only.
We do not need to WARN_ON() here.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 15 Jul 2020 11:30:43 +0000 (12:30 +0100)]
btrfs: reduce contention on log trees when logging checksums
The possibility of extents being shared (through clone and deduplication
operations) requires special care when logging data checksums, to avoid
having a log tree with different checksum items that cover ranges which
overlap (which resulted in missing checksums after replaying a log tree).
Such problems were fixed in the past by the following commits:
commit
40e046acbd2f ("Btrfs: fix missing data checksums after replaying a
log tree")
commit
e289f03ea79b ("btrfs: fix corrupt log due to concurrent fsync of
inodes with shared extents")
Test case generic/588 exercises the scenario solved by the first commit
(purely sequential and deterministic) while test case generic/457 often
triggered the case fixed by the second commit (not deterministic, requires
specific timings under concurrency).
The problems were addressed by deleting, from the log tree, any existing
checksums before logging the new ones. And also by doing the deletion and
logging of the cheksums while locking the checksum range in an extent io
tree (root->log_csum_range), to deal with the case where we have concurrent
fsyncs against files with shared extents.
That however causes more contention on the leaves of a log tree where we
store checksums (and all the nodes in the paths leading to them), even
when we do not have shared extents, or all the shared extents were created
by past transactions. It also adds a bit of contention on the spin lock of
the log_csums_range extent io tree of the log root.
This change adds a 'last_reflink_trans' field to the inode to keep track
of the last transaction where a new extent was shared between inodes
(through clone and deduplication operations). It is updated for both the
source and destination inodes of reflink operations whenever a new extent
(created in the current transaction) becomes shared by the inodes. This
field is kept in memory only, not persisted in the inode item, similar
to other existing fields (last_unlink_trans, logged_trans).
When logging checksums for an extent, if the value of 'last_reflink_trans'
is smaller then the current transaction's generation/id, we skip locking
the extent range and deletion of checksums from the log tree, since we
know we do not have new shared extents. This reduces contention on the
log tree's leaves where checksums are stored.
The following script, which uses fio, was used to measure the impact of
this change:
$ cat test-fsync.sh
#!/bin/bash
DEV=/dev/sdk
MNT=/mnt/sdk
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-d single -m single"
if [ $# -ne 3 ]; then
echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ"
exit 1
fi
NUM_JOBS=$1
FILE_SIZE=$2
FSYNC_FREQ=$3
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=write
fsync=$FSYNC_FREQ
fallocate=none
group_reporting=1
direct=0
bs=64k
ioengine=sync
size=$FILE_SIZE
directory=$MNT
numjobs=$NUM_JOBS
EOF
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
The tests were performed for different numbers of jobs, file sizes and
fsync frequency. A qemu VM using kvm was used, with 8 cores (the host has
12 cores, with cpu governance set to performance mode on all cores), 16GiB
of ram (the host has 64GiB) and using a NVMe device directly (without an
intermediary filesystem in the host). While running the tests, the host
was not used for anything else, to avoid disturbing the tests.
The obtained results were the following (the last line of fio's output was
pasted). Starting with 16 jobs is where a significant difference is
observable in this particular setup and hardware (differences highlighted
below). The very small differences for tests with less than 16 jobs are
possibly just noise and random.
**** 1 job, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=23.8MiB/s (24.9MB/s), 23.8MiB/s-23.8MiB/s (24.9MB/s-24.9MB/s), io=1024MiB (1074MB), run=43075-43075msec
after this change:
WRITE: bw=24.4MiB/s (25.6MB/s), 24.4MiB/s-24.4MiB/s (25.6MB/s-25.6MB/s), io=1024MiB (1074MB), run=41938-41938msec
**** 2 jobs, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=37.7MiB/s (39.5MB/s), 37.7MiB/s-37.7MiB/s (39.5MB/s-39.5MB/s), io=2048MiB (2147MB), run=54351-54351msec
after this change:
WRITE: bw=37.7MiB/s (39.5MB/s), 37.6MiB/s-37.6MiB/s (39.5MB/s-39.5MB/s), io=2048MiB (2147MB), run=54428-54428msec
**** 4 jobs, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=67.5MiB/s (70.8MB/s), 67.5MiB/s-67.5MiB/s (70.8MB/s-70.8MB/s), io=4096MiB (4295MB), run=60669-60669msec
after this change:
WRITE: bw=68.6MiB/s (71.0MB/s), 68.6MiB/s-68.6MiB/s (71.0MB/s-71.0MB/s), io=4096MiB (4295MB), run=59678-59678msec
**** 8 jobs, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=128MiB/s (134MB/s), 128MiB/s-128MiB/s (134MB/s-134MB/s), io=8192MiB (8590MB), run=64048-64048msec
after this change:
WRITE: bw=129MiB/s (135MB/s), 129MiB/s-129MiB/s (135MB/s-135MB/s), io=8192MiB (8590MB), run=63405-63405msec
**** 16 jobs, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=78.5MiB/s (82.3MB/s), 78.5MiB/s-78.5MiB/s (82.3MB/s-82.3MB/s), io=16.0GiB (17.2GB), run=208676-208676msec
after this change:
WRITE: bw=110MiB/s (115MB/s), 110MiB/s-110MiB/s (115MB/s-115MB/s), io=16.0GiB (17.2GB), run=149295-149295msec
(+40.1% throughput, -28.5% runtime)
**** 32 jobs, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=58.8MiB/s (61.7MB/s), 58.8MiB/s-58.8MiB/s (61.7MB/s-61.7MB/s), io=32.0GiB (34.4GB), run=557134-557134msec
after this change:
WRITE: bw=76.1MiB/s (79.8MB/s), 76.1MiB/s-76.1MiB/s (79.8MB/s-79.8MB/s), io=32.0GiB (34.4GB), run=430550-430550msec
(+29.4% throughput, -22.7% runtime)
**** 64 jobs, file size 512M, fsync frequency 1 ****
before this change:
WRITE: bw=65.8MiB/s (68.0MB/s), 65.8MiB/s-65.8MiB/s (68.0MB/s-68.0MB/s), io=32.0GiB (34.4GB), run=498055-498055msec
after this change:
WRITE: bw=85.1MiB/s (89.2MB/s), 85.1MiB/s-85.1MiB/s (89.2MB/s-89.2MB/s), io=32.0GiB (34.4GB), run=385116-385116msec
(+29.3% throughput, -22.7% runtime)
**** 128 jobs, file size 256M, fsync frequency 1 ****
before this change:
WRITE: bw=54.7MiB/s (57.3MB/s), 54.7MiB/s-54.7MiB/s (57.3MB/s-57.3MB/s), io=32.0GiB (34.4GB), run=599373-599373msec
after this change:
WRITE: bw=121MiB/s (126MB/s), 121MiB/s-121MiB/s (126MB/s-126MB/s), io=32.0GiB (34.4GB), run=271907-271907msec
(+121.2% throughput, -54.6% runtime)
**** 256 jobs, file size 256M, fsync frequency 1 ****
before this change:
WRITE: bw=69.2MiB/s (72.5MB/s), 69.2MiB/s-69.2MiB/s (72.5MB/s-72.5MB/s), io=64.0GiB (68.7GB), run=947536-947536msec
after this change:
WRITE: bw=121MiB/s (127MB/s), 121MiB/s-121MiB/s (127MB/s-127MB/s), io=64.0GiB (68.7GB), run=541916-541916msec
(+74.9% throughput, -42.8% runtime)
**** 512 jobs, file size 128M, fsync frequency 1 ****
before this change:
WRITE: bw=85.4MiB/s (89.5MB/s), 85.4MiB/s-85.4MiB/s (89.5MB/s-89.5MB/s), io=64.0GiB (68.7GB), run=767734-767734msec
after this change:
WRITE: bw=141MiB/s (147MB/s), 141MiB/s-141MiB/s (147MB/s-147MB/s), io=64.0GiB (68.7GB), run=466022-466022msec
(+65.1% throughput, -39.3% runtime)
**** 1024 jobs, file size 128M, fsync frequency 1 ****
before this change:
WRITE: bw=115MiB/s (120MB/s), 115MiB/s-115MiB/s (120MB/s-120MB/s), io=128GiB (137GB), run=1143775-1143775msec
after this change:
WRITE: bw=171MiB/s (180MB/s), 171MiB/s-171MiB/s (180MB/s-180MB/s), io=128GiB (137GB), run=764843-764843msec
(+48.7% throughput, -33.1% runtime)
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 16 Jul 2020 15:17:19 +0000 (18:17 +0300)]
btrfs: remove done label in writepage_delalloc
Since there is not common cleanup run after the label it makes it
somewhat redundant.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 13 Jul 2020 01:03:22 +0000 (09:03 +0800)]
btrfs: add comments for btrfs_reserve_flush_enum
This enum is the interface exposed to developers.
Although we have a detailed comment explaining the whole idea of space
flushing at the beginning of space-info.c, the exposed enum interface
doesn't have any comment.
Some corner cases, like BTRFS_RESERVE_FLUSH_ALL and
BTRFS_RESERVE_FLUSH_ALL_STEAL can be interrupted by fatal signals, are
not explained at all.
So add some simple comments for these enums as a quick reference.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 13 Jul 2020 01:03:21 +0000 (09:03 +0800)]
btrfs: relocation: review the call sites which can be interrupted by signal
Since most metadata reservation calls can return -EINTR when get
interrupted by fatal signal, we need to review the all the metadata
reservation call sites.
In relocation code, the metadata reservation happens in the following
sites:
- btrfs_block_rsv_refill() in merge_reloc_root()
merge_reloc_root() is a pretty critical section, we don't want to be
interrupted by signal, so change the flush status to
BTRFS_RESERVE_FLUSH_LIMIT, so it won't get interrupted by signal.
Since such change can be ENPSPC-prone, also shrink the amount of
metadata to reserve least amount avoid deadly ENOSPC there.
- btrfs_block_rsv_refill() in reserve_metadata_space()
It calls with BTRFS_RESERVE_FLUSH_LIMIT, which won't get interrupted
by signal.
- btrfs_block_rsv_refill() in prepare_to_relocate()
- btrfs_block_rsv_add() in prepare_to_relocate()
- btrfs_block_rsv_refill() in relocate_block_group()
- btrfs_delalloc_reserve_metadata() in relocate_file_extent_cluster()
- btrfs_start_transaction() in relocate_block_group()
- btrfs_start_transaction() in create_reloc_inode()
Can be interrupted by fatal signal and we can handle it easily.
For these call sites, just catch the -EINTR value in btrfs_balance()
and count them as canceled.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 13 Jul 2020 01:03:20 +0000 (09:03 +0800)]
btrfs: avoid possible signal interruption of btrfs_drop_snapshot() on relocation tree
[BUG]
There is a bug report about bad signal timing could lead to read-only
fs during balance:
BTRFS info (device xvdb): balance: start -d -m -s
BTRFS info (device xvdb): relocating block group
73001861120 flags metadata
BTRFS info (device xvdb): found 12236 extents, stage: move data extents
BTRFS info (device xvdb): relocating block group
71928119296 flags data
BTRFS info (device xvdb): found 3 extents, stage: move data extents
BTRFS info (device xvdb): found 3 extents, stage: update data pointers
BTRFS info (device xvdb): relocating block group
60922265600 flags metadata
BTRFS: error (device xvdb) in btrfs_drop_snapshot:5505: errno=-4 unknown
BTRFS info (device xvdb): forced readonly
BTRFS info (device xvdb): balance: ended with status: -4
[CAUSE]
The direct cause is the -EINTR from the following call chain when a
fatal signal is pending:
relocate_block_group()
|- clean_dirty_subvols()
|- btrfs_drop_snapshot()
|- btrfs_start_transaction()
|- btrfs_delayed_refs_rsv_refill()
|- btrfs_reserve_metadata_bytes()
|- __reserve_metadata_bytes()
|- wait_reserve_ticket()
|- prepare_to_wait_event();
|- ticket->error = -EINTR;
Normally this behavior is fine for most btrfs_start_transaction()
callers, as they need to catch any other error, same for the signal, and
exit ASAP.
However for balance, especially for the clean_dirty_subvols() case, we're
already doing cleanup works, getting -EINTR from btrfs_drop_snapshot()
could cause a lot of unexpected problems.
From the mentioned forced read-only report, to later balance error due
to half dropped reloc trees.
[FIX]
Fix this problem by using btrfs_join_transaction() if
btrfs_drop_snapshot() is called from relocation context.
Since btrfs_join_transaction() won't get interrupted by signal, we can
continue the cleanup.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>3
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 13 Jul 2020 01:03:19 +0000 (09:03 +0800)]
btrfs: relocation: allow signal to cancel balance
Although btrfs balance can be canceled with "btrfs balance cancel"
command, it's still almost muscle memory to press Ctrl-C to cancel a
long running btrfs balance.
So allow btrfs balance to check signal to determine if it should exit.
The cancellation points are in known location and we're only adding one
more reason, so this should be safe.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 15 Jul 2020 11:02:17 +0000 (14:02 +0300)]
btrfs: raid56: remove out label in __raid56_parity_recover
There's no cleanup that occurs so we can simply return 0 directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 10 Jul 2020 07:49:56 +0000 (09:49 +0200)]
btrfs: add missing check for nocow and compression inode flags
User Forza reported on IRC that some invalid combinations of file
attributes are accepted by chattr.
The NODATACOW and compression file flags/attributes are mutually
exclusive, but they could be set by 'chattr +c +C' on an empty file. The
nodatacow will be in effect because it's checked first in
btrfs_run_delalloc_range.
Extend the flag validation to catch the following cases:
- input flags are conflicting
- old and new flags are conflicting
- initialize the local variable with inode flags after inode ls locked
Inode attributes take precedence over mount options and are an
independent setting.
Nocompress would be a no-op with nodatacow, but we don't want to mix
any compression-related options with nodatacow.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Fri, 10 Jul 2020 06:37:38 +0000 (14:37 +0800)]
btrfs: don't traverse into the seed devices in show_devname
->show_devname currently shows the lowest devid in the list. As the seed
devices have the lowest devid in the sprouted filesystem, the userland
tool such as findmnt end up seeing seed device instead of the device from
the read-writable sprouted filesystem. As shown below.
mount /dev/sda /btrfs
mount: /btrfs: WARNING: device write-protected, mounted read-only.
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs
899f7027-3e46-4626-93e7-
7d4c9ad19111
btrfs dev add -f /dev/sdb /btrfs
umount /btrfs
mount /dev/sdb /btrfs
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs
899f7027-3e46-4626-93e7-
7d4c9ad19111
All sprouts from a single seed will show the same seed device and the
same fsid. That's confusing.
This is causing problems in our prototype as there isn't any reference
to the sprout file-system(s) which is being used for actual read and
write.
This was added in the patch which implemented the show_devname in btrfs
commit
9c5085c14798 ("Btrfs: implement ->show_devname").
I tried to look for any particular reason that we need to show the seed
device, there isn't any.
So instead, do not traverse through the seed devices, just show the
lowest devid in the sprouted fsid.
After the patch:
mount /dev/sda /btrfs
mount: /btrfs: WARNING: device write-protected, mounted read-only.
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs
899f7027-3e46-4626-93e7-
7d4c9ad19111
btrfs dev add -f /dev/sdb /btrfs
mount -o rw,remount /dev/sdb /btrfs
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sdb /btrfs
595ca0e6-b82e-46b5-b9e2-
c72a6928be48
mount /dev/sda /btrfs1
mount: /btrfs1: WARNING: device write-protected, mounted read-only.
btrfs dev add -f /dev/sdc /btrfs1
findmnt --output SOURCE,TARGET,UUID /btrfs1
SOURCE TARGET UUID
/dev/sdc /btrfs1
ca1dbb7a-8446-4f95-853c-
a20f3f82bdbb
cat /proc/self/mounts | grep btrfs
/dev/sdb /btrfs btrfs rw,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0
/dev/sdc /btrfs1 btrfs ro,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
CC: stable@vger.kernel.org # 4.19+
Tested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 14 Jul 2020 01:12:20 +0000 (09:12 +0800)]
btrfs: qgroup: free per-trans reserved space when a subvolume gets dropped
[BUG]
Sometime fsstress could lead to qgroup warning for case like
generic/013:
BTRFS warning (device dm-3): qgroup 0/259 has unreleased space, type 1 rsv 81920
------------[ cut here ]------------
WARNING: CPU: 9 PID: 24535 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:close_ctree+0x1dc/0x323 [btrfs]
Call Trace:
btrfs_put_super+0x15/0x17 [btrfs]
generic_shutdown_super+0x72/0x110
kill_anon_super+0x18/0x30
btrfs_kill_super+0x17/0x30 [btrfs]
deactivate_locked_super+0x3b/0xa0
deactivate_super+0x40/0x50
cleanup_mnt+0x135/0x190
__cleanup_mnt+0x12/0x20
task_work_run+0x64/0xb0
__prepare_exit_to_usermode+0x1bc/0x1c0
__syscall_return_slowpath+0x47/0x230
do_syscall_64+0x64/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace
6c341cdf9b6cc3c1 ]---
BTRFS error (device dm-3): qgroup reserved space leaked
While that subvolume 259 is no longer in that filesystem.
[CAUSE]
Normally per-trans qgroup reserved space is freed when a transaction is
committed, in commit_fs_roots().
However for completely dropped subvolume, that subvolume is completely
gone, thus is no longer in the fs_roots_radix, and its per-trans
reserved qgroup will never be freed.
Since the subvolume is already gone, leaked per-trans space won't cause
any trouble for end users.
[FIX]
Just call btrfs_qgroup_free_meta_all_pertrans() before a subvolume is
completely dropped.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tom Rix [Tue, 7 Jul 2020 13:29:08 +0000 (06:29 -0700)]
btrfs: ref-verify: fix memory leak in add_block_entry
clang static analysis flags this error
fs/btrfs/ref-verify.c:290:3: warning: Potential leak of memory pointed to by 're' [unix.Malloc]
kfree(be);
^~~~~
The problem is in this block of code:
if (root_objectid) {
struct root_entry *exist_re;
exist_re = insert_root_entry(&exist->roots, re);
if (exist_re)
kfree(re);
}
There is no 'else' block freeing when root_objectid is 0. Add the
missing kfree to the else branch.
Fixes:
fd708b81d972 ("Btrfs: add a extent ref verify tool")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 8 Jul 2020 20:55:14 +0000 (22:55 +0200)]
btrfs: prefetch chunk tree leaves at mount
The whole chunk tree is read at mount time so we can utilize readahead
to get the tree blocks to memory before we read the items. The idea is
from Robbie, but instead of updating search slot readahead, this patch
implements the chunk tree readahead manually from nodes on level 1.
We've decided to do specific readahead optimizations and then unify them
under a common API so we don't break everything by changing the search
slot readahead logic.
Higher chunk trees grow on large filesystems (many terabytes), and
prefetching just level 1 seems to be sufficient. Provided example was
from a 200TiB filesystem with chunk tree level 2.
CC: Robbie Ko <robbieko@synology.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Mon, 13 Jul 2020 12:29:00 +0000 (21:29 +0900)]
btrfs: add metadata_uuid to FS_INFO ioctl
Add retrieval of the filesystem's metadata UUID to the fsinfo ioctl.
This is driven by setting the BTRFS_FS_INFO_FLAG_METADATA_UUID flag in
btrfs_ioctl_fs_info_args::flags.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Mon, 13 Jul 2020 12:28:59 +0000 (21:28 +0900)]
btrfs: add filesystem generation to FS_INFO ioctl
Add retrieval of the filesystem's generation to the fsinfo ioctl. This is
driven by setting the BTRFS_FS_INFO_FLAG_GENERATION flag in
btrfs_ioctl_fs_info_args::flags.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Mon, 13 Jul 2020 12:28:58 +0000 (21:28 +0900)]
btrfs: pass checksum type via BTRFS_IOC_FS_INFO ioctl
With the recent addition of filesystem checksum types other than CRC32c,
it is not anymore hard-coded which checksum type a btrfs filesystem uses.
Up to now there is no good way to read the filesystem checksum, apart from
reading the filesystem UUID and then query sysfs for the checksum type.
Add a new csum_type and csum_size fields to the BTRFS_IOC_FS_INFO ioctl
command which usually is used to query filesystem features. Also add a
flags member indicating that the kernel responded with a set csum_type and
csum_size field.
For compatibility reasons, only return the csum_type and csum_size if
the BTRFS_FS_INFO_FLAG_CSUM_INFO flag was passed to the kernel. Also
clear any unknown flags so we don't pass false positives to user-space
newer than the kernel.
To simplify further additions to the ioctl, also switch the padding to a
u8 array. Pahole was used to verify the result of this switch:
The csum members are added before flags, which might look odd, but this
is to keep the alignment requirements and not to introduce holes in the
structure.
$ pahole -C btrfs_ioctl_fs_info_args fs/btrfs/btrfs.ko
struct btrfs_ioctl_fs_info_args {
__u64 max_id; /* 0 8 */
__u64 num_devices; /* 8 8 */
__u8 fsid[16]; /* 16 16 */
__u32 nodesize; /* 32 4 */
__u32 sectorsize; /* 36 4 */
__u32 clone_alignment; /* 40 4 */
__u16 csum_type; /* 44 2 */
__u16 csum_size; /* 46 2 */
__u64 flags; /* 48 8 */
__u8 reserved[968]; /* 56 968 */
/* size: 1024, cachelines: 16, members: 10 */
};
Fixes:
3951e7f050ac ("btrfs: add xxhash64 to checksumming algorithms")
Fixes:
3831bf0094ab ("btrfs: add sha256 to checksumming algorithm")
CC: stable@vger.kernel.org # 5.5+
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 13 Jul 2020 10:50:49 +0000 (18:50 +0800)]
btrfs: qgroup: remove ASYNC_COMMIT mechanism in favor of reserve retry-after-EDQUOT
commit
a514d63882c3 ("btrfs: qgroup: Commit transaction in advance to
reduce early EDQUOT") tries to reduce the early EDQUOT problems by
checking the qgroup free against threshold and tries to wake up commit
kthread to free some space.
The problem of that mechanism is, it can only free qgroup per-trans
metadata space, can't do anything to data, nor prealloc qgroup space.
Now since we have the ability to flush qgroup space, and implemented
retry-after-EDQUOT behavior, such mechanism can be completely replaced.
So this patch will cleanup such mechanism in favor of
retry-after-EDQUOT.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 13 Jul 2020 10:50:48 +0000 (18:50 +0800)]
btrfs: qgroup: try to flush qgroup space when we get -EDQUOT
[PROBLEM]
There are known problem related to how btrfs handles qgroup reserved
space. One of the most obvious case is the the test case btrfs/153,
which do fallocate, then write into the preallocated range.
btrfs/153 1s ... - output mismatch (see xfstests-dev/results//btrfs/153.out.bad)
--- tests/btrfs/153.out 2019-10-22 15:18:14.
068965341 +0800
+++ xfstests-dev/results//btrfs/153.out.bad 2020-07-01 20:24:40.
730000089 +0800
@@ -1,2 +1,5 @@
QA output created by 153
+pwrite: Disk quota exceeded
+/mnt/scratch/testfile2: Disk quota exceeded
+/mnt/scratch/testfile2: Disk quota exceeded
Silence is golden
...
(Run 'diff -u xfstests-dev/tests/btrfs/153.out xfstests-dev/results//btrfs/153.out.bad' to see the entire diff)
[CAUSE]
Since commit
c6887cd11149 ("Btrfs: don't do nocow check unless we have to"),
we always reserve space no matter if it's COW or not.
Such behavior change is mostly for performance, and reverting it is not
a good idea anyway.
For preallcoated extent, we reserve qgroup data space for it already,
and since we also reserve data space for qgroup at buffered write time,
it needs twice the space for us to write into preallocated space.
This leads to the -EDQUOT in buffered write routine.
And we can't follow the same solution, unlike data/meta space check,
qgroup reserved space is shared between data/metadata.
The EDQUOT can happen at the metadata reservation, so doing NODATACOW
check after qgroup reservation failure is not a solution.
[FIX]
To solve the problem, we don't return -EDQUOT directly, but every time
we got a -EDQUOT, we try to flush qgroup space:
- Flush all inodes of the root
NODATACOW writes will free the qgroup reserved at run_dealloc_range().
However we don't have the infrastructure to only flush NODATACOW
inodes, here we flush all inodes anyway.
- Wait for ordered extents
This would convert the preallocated metadata space into per-trans
metadata, which can be freed in later transaction commit.
- Commit transaction
This will free all per-trans metadata space.
Also we don't want to trigger flush multiple times, so here we introduce
a per-root wait list and a new root status, to ensure only one thread
starts the flushing.
Fixes:
c6887cd11149 ("Btrfs: don't do nocow check unless we have to")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 8 Jul 2020 06:24:45 +0000 (14:24 +0800)]
btrfs: qgroup: allow to unreserve range without releasing other ranges
[PROBLEM]
Before this patch, when btrfs_qgroup_reserve_data() fails, we free all
reserved space of the changeset.
For example:
ret = btrfs_qgroup_reserve_data(inode, changeset, 0, SZ_1M);
ret = btrfs_qgroup_reserve_data(inode, changeset, SZ_1M, SZ_1M);
ret = btrfs_qgroup_reserve_data(inode, changeset, SZ_2M, SZ_1M);
If the last btrfs_qgroup_reserve_data() failed, it will release the
entire [0, 3M) range.
This behavior is kind of OK for now, as when we hit -EDQUOT, we normally
go error handling and need to release all reserved ranges anyway.
But this also means the following call is not possible:
ret = btrfs_qgroup_reserve_data();
if (ret == -EDQUOT) {
/* Do something to free some qgroup space */
ret = btrfs_qgroup_reserve_data();
}
As if the first btrfs_qgroup_reserve_data() fails, it will free all
reserved qgroup space.
[CAUSE]
This is because we release all reserved ranges when
btrfs_qgroup_reserve_data() fails.
[FIX]
This patch will implement a new function, qgroup_unreserve_range(), to
iterate through the ulist nodes, to find any nodes in the failure range,
and remove the EXTENT_QGROUP_RESERVED bits from the io_tree, and
decrease the extent_changeset::bytes_changed, so that we can revert to
previous state.
This allows later patches to retry btrfs_qgroup_reserve_data() if EDQUOT
happens.
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Mon, 6 Jul 2020 13:14:11 +0000 (09:14 -0400)]
btrfs: convert block group refcount to refcount_t
We have refcount_t now with the associated library to handle refcounts,
which gives us extra debugging around reference count mistakes that may
be made. For example it'll warn on any transition from 0->1 or 0->-1,
which is handy for noticing cases where we've messed up reference
counting. Convert the block group ref counting from an atomic_t to
refcount_t and use the appropriate helpers.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Marcos Paulo de Souza [Mon, 6 Jul 2020 14:59:36 +0000 (11:59 -0300)]
btrfs: add multi-statement protection to btrfs_set/clear_and_info macros
Multi-statement macros should be enclosed in do/while(0) block to make
their use safe in single statement if conditions. All current uses of
the macros are safe, so this change is for future protection.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 13:46:47 +0000 (16:46 +0300)]
btrfs: remove fail label in check_compressed_csum
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 13:46:46 +0000 (16:46 +0300)]
btrfs: raid56: don't opencode swap() in __raid_recover_end_io
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 13:46:45 +0000 (16:46 +0300)]
btrfs: raid56: use in_range where applicable
While at it use the opportunity to simplify find_logical_bio_stripe by
reducing the scope of 'stripe_start' variable and squash the
sector-to-bytes conversion on one line.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 13:46:43 +0000 (16:46 +0300)]
btrfs: raid56: assign bio in while() when using bio_list_pop
Unify the style in the file such that return value of bio_list_pop is
assigned directly in the while loop. This is in line with the rest of
the kernel.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 13:46:42 +0000 (16:46 +0300)]
btrfs: raid56: remove redundant device check in rbio_add_io_page
The merging logic is always executed if the current stripe's device
is not missing. So there's no point in duplicating the check. Simply
remove it, while at it reduce the scope of the 'last_end' variable.
If the current stripe's device is missing we fail the stripe early on.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 13:46:41 +0000 (16:46 +0300)]
btrfs: always initialize btrfs_bio::tgtdev_map/raid_map pointers
Since btrfs_bio always contains the extra space for the tgtdev_map and
raid_maps it's pointless to make the assignment iff specific conditions
are met.
Instead, always assign the pointers to their correct value at allocation
time. To accommodate this change also move code a bit in
__btrfs_map_block so that btrfs_bio::stripes array is always initialized
before the raid_map, subsequently move the call to sort_parity_stripes
in the 'if' building the raid_map, retaining the old behavior.
To better understand the change, there are 2 aspects to this:
1. The original code is harder to grasp because the calculations for
initializing raid_map/tgtdev ponters are apart from the initial
allocation of memory. Having them predicated on 2 separate checks
doesn't help that either... So by moving the initialisation in
alloc_btrfs_bio puts everything together.
2. tgtdev/raid_maps are now always initialized despite sometimes they
might be equal i.e __btrfs_map_block_for_discard calls
alloc_btrfs_bio with tgtdev = 0 but their usage should be predicated
on external checks i.e. just because those pointers are non-null
doesn't mean they are valid per-se. And actually while taking another
look at __btrfs_map_block I saw a discrepancy:
Original code initialised tgtdev_map if the following check is true:
if (dev_replace_is_ongoing && dev_replace->tgtdev != NULL)
However, further down tgtdev_map is only used if the following check
is true:
if (dev_replace_is_ongoing && dev_replace->tgtdev != NULL && need_full_stripe(op))
e.g. the additional need_full_stripe(op) predicate is there.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more details from mail discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Fri, 3 Jul 2020 08:13:15 +0000 (11:13 +0300)]
btrfs: sysfs: add bdi link to the fsid directory
Since BTRFS uses a private bdi it makes sense to create a link to this
bdi under /sys/fs/btrfs/<UUID>/bdi. This allows size of read ahead to
be controlled. Without this patch it's not possible to uniquely identify
which bdi pertains to which btrfs filesystem in the case of multiple
btrfs filesystems.
It's fine to simply call sysfs_remove_link without checking if the
link indeed has been created. The call path
sysfs_remove_link
kernfs_remove_by_name
kernfs_remove_by_name_ns
will simply return -ENOENT in case it doesn't exist.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 12:23:34 +0000 (15:23 +0300)]
btrfs: increment corrupt device counter during compressed read
If a compressed read fails due to checksum error only a line is printed
to dmesg, device corrupt counter is not modified.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 12:23:33 +0000 (15:23 +0300)]
btrfs: remove needless ASSERT check of orig_bio in end_compressed_bio_read
compressed_bio::orig_bio is always set in btrfs_submit_compressed_read
before any bio submission is performed. Since that function is always
called with a valid bio it renders the ASSERT unnecessary.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 12:23:32 +0000 (15:23 +0300)]
btrfs: increment device corruption error in case of checksum error
Now that btrfs_io_bio have access to btrfs_device we can safely
increment the device corruption counter on error. There is one notable
exception - repair bios for raid. Since those don't go through the
normal submit_stripe_bio callpath but through raid56_parity_recover thus
repair bios won't have their device set.
Scrub increments the corruption counter for checksum mismatch as well
but does not call this function.
Link: https://lore.kernel.org/linux-btrfs/4857863.FCrPRfMyHP@liv/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 12:23:31 +0000 (15:23 +0300)]
btrfs: don't check for btrfs_device::bdev in btrfs_end_bio
btrfs_map_bio ensures that all submitted bios to devices have valid
btrfs_device::bdev so this check can be removed from btrfs_end_bio. This
check was added in june 2012
597a60fadedf ("Btrfs: don't count I/O
statistic read errors for missing devices") but then in October of the
same year another commit
de1ee92ac3bc ("Btrfs: recheck bio against
block device when we map the bio") started checking for the presence of
btrfs_device::bdev before actually issuing the bio.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Fri, 3 Jul 2020 08:14:27 +0000 (11:14 +0300)]
btrfs: record btrfs_device directly in btrfs_io_bio
Instead of recording stripe_index and using that to access correct
btrfs_device from btrfs_bio::stripes record the btrfs_device in
btrfs_io_bio. This will enable endio handlers to increment device
error counters on checksum errors.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 12:23:29 +0000 (15:23 +0300)]
btrfs: streamline btrfs_get_io_failure_record logic
Make the function directly return a pointer to a failure record and
adjust callers to handle it. Also refactor the logic inside so that
the case which allocates the failure record for the first time is not
handled in an 'if' arm, saving us a level of indentation. Finally make
the function static as it's not used outside of extent_io.c .
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 2 Jul 2020 12:23:28 +0000 (15:23 +0300)]
btrfs: make get_state_failrec return failrec directly
Only failure that get_state_failrec can get is if there is no failure
for the given address. There is no reason why the function should return
a status code and use a separate parameter for returning the actual
failure rec (if one is found). Simplify it by making the return type
a pointer and return ERR_PTR value in case of errors.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 1 Jul 2020 15:08:43 +0000 (17:08 +0200)]
btrfs: remove deprecated mount option subvolrootid
The option subvolrootid used to be a workaround for mounting subvolumes
and ineffective since
5e2a4b25da23 ("btrfs: deprecate subvolrootid mount
option"). We have subvol= that works and we don't need to keep the
cruft, let's remove it.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 1 Jul 2020 15:02:34 +0000 (17:02 +0200)]
btrfs: remove deprecated mount option alloc_start
The mount option alloc_start has no effect since
0d0c71b31720 ("btrfs:
obsolete and remove mount option alloc_start") which has details why
it's been deprecated. We can remove it.
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 2 Jul 2020 11:32:40 +0000 (12:32 +0100)]
btrfs: remove no longer needed use of log_writers for the log root tree
When syncing the log, we used to update the log root tree without holding
neither the log_mutex of the subvolume root nor the log_mutex of log root
tree.
We used to have two critical sections delimited by the log_mutex of the
log root tree, so in the first one we incremented the log_writers of the
log root tree and on the second one we decremented it and waited for the
log_writers counter to go down to zero. This was because the update of
the log root tree happened between the two critical sections.
The use of two critical sections allowed a little bit more of parallelism
and required the use of the log_writers counter, necessary to make sure
we didn't miss any log root tree update when we have multiple tasks trying
to sync the log in parallel.
However after commit
06989c799f0481 ("Btrfs: fix race updating log root
item during fsync") the log root tree update was moved into a critical
section delimited by the subvolume's log_mutex. Later another commit
moved the log tree update from that critical section into the second
critical section delimited by the log_mutex of the log root tree. Both
commits addressed different bugs.
The end result is that the first critical section delimited by the
log_mutex of the log root tree became pointless, since there's nothing
done between it and the second critical section, we just have an unlock
of the log_mutex followed by a lock operation. This means we can merge
both critical sections, as the first one does almost nothing now, and we
can stop using the log_writers counter of the log root tree, which was
incremented in the first critical section and decremented in the second
criticial section, used to make sure no one in the second critical section
started writeback of the log root tree before some other task updated it.
So just remove the mutex_unlock() followed by mutex_lock() of the log root
tree, as well as the use of the log_writers counter for the log root tree.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 2 Jul 2020 11:32:31 +0000 (12:32 +0100)]
btrfs: stop incremening log_batch for the log root tree when syncing log
We are incrementing the log_batch atomic counter of the root log tree but
we never use that counter, it's used only for the log trees of subvolume
roots. We started doing it when we moved the log_batch and log_write
counters from the global, per fs, btrfs_fs_info structure, into the
btrfs_root structure in commit
7237f1833601dc ("Btrfs: fix tree logs
parallel sync").
So just stop doing it for the log root tree and add a comment over the
field declaration so inform it's used only for log trees of subvolume
roots.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 2 Jul 2020 11:32:20 +0000 (12:32 +0100)]
btrfs: only commit delayed items at fsync if we are logging a directory
When logging an inode we are committing its delayed items if either the
inode is a directory or if it is a new inode, created in the current
transaction.
We need to do it for directories, since new directory indexes are stored
as delayed items of the inode and when logging a directory we need to be
able to access all indexes from the fs/subvolume tree in order to figure
out which index ranges need to be logged.
However for new inodes that are not directories, we do not need to do it
because the only type of delayed item they can have is the inode item, and
we are guaranteed to always log an up to date version of the inode item:
*) for a full fsync we do it by committing the delayed inode and then
copying the item from the fs/subvolume tree with
copy_inode_items_to_log();
*) for a fast fsync we always log the inode item based on the contents of
the in-memory struct btrfs_inode. We guarantee this is always done since
commit
e4545de5b035c7 ("Btrfs: fix fsync data loss after append write").
So stop running delayed items for a new inodes that are not directories,
since that forces committing the delayed inode into the fs/subvolume tree,
wasting time and adding contention to the tree when a full fsync is not
required. We will only do it in case a fast fsync is needed.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 2 Jul 2020 11:31:59 +0000 (12:31 +0100)]
btrfs: only commit the delayed inode when doing a full fsync
Commit
2c2c452b0cafdc ("Btrfs: fix fsync when extend references are added
to an inode") forced a commit of the delayed inode when logging an inode
in order to ensure we would end up logging the inode item during a full
fsync. By committing the delayed inode, we updated the inode item in the
fs/subvolume tree and then later when copying items from leafs modified in
the current transaction into the log tree (with copy_inode_items_to_log())
we ended up copying the inode item from the fs/subvolume tree into the log
tree. Logging an up to date version of the inode item is required to make
sure at log replay time we get the link count fixup triggered among other
things (replay xattr deletes, etc). The test case generic/040 from fstests
exercises the bug which that commit fixed.
However for a fast fsync we don't need to commit the delayed inode because
we always log an up to date version of the inode item based on the struct
btrfs_inode we have in-memory. We started doing this for fast fsyncs since
commit
e4545de5b035c7 ("Btrfs: fix fsync data loss after append write").
So just stop committing the delayed inode if we are doing a fast fsync,
we are only wasting time and adding contention on fs/subvolume tree.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 16 Jun 2020 02:17:36 +0000 (10:17 +0800)]
btrfs: preallocate anon block device at first phase of snapshot creation
[BUG]
When the anonymous block device pool is exhausted, subvolume/snapshot
creation fails with EMFILE (Too many files open). This has been reported
by a user. The allocation happens in the second phase during transaction
commit where it's only way out is to abort the transaction
BTRFS: Transaction aborted (error -24)
WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
Call Trace:
create_pending_snapshots+0x82/0xa0 [btrfs]
btrfs_commit_transaction+0x275/0x8c0 [btrfs]
btrfs_mksubvol+0x4b9/0x500 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0x11a4/0x2da0 [btrfs]
do_vfs_ioctl+0xa9/0x640
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace
33f2f83f3d5250e9 ]---
BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
BTRFS info (device sda1): forced readonly
BTRFS warning (device sda1): Skipping commit of aborted transaction.
BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown
[CAUSE]
When the global anonymous block device pool is exhausted, the following
call chain will fail, and lead to transaction abort:
btrfs_ioctl_snap_create_v2()
|- btrfs_ioctl_snap_create_transid()
|- btrfs_mksubvol()
|- btrfs_commit_transaction()
|- create_pending_snapshot()
|- btrfs_get_fs_root()
|- btrfs_init_fs_root()
|- get_anon_bdev()
[FIX]
Although we can't enlarge the anonymous block device pool, at least we
can preallocate anon_dev for subvolume/snapshot in the first phase,
outside of transaction context and exactly at the moment the user calls
the creation ioctl.
Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 16 Jun 2020 02:17:37 +0000 (10:17 +0800)]
btrfs: free anon block device right after subvolume deletion
[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted caused by slow anonymous block device reclaim:
BTRFS: Transaction aborted (error -24)
WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
Call Trace:
create_pending_snapshots+0x82/0xa0 [btrfs]
btrfs_commit_transaction+0x275/0x8c0 [btrfs]
btrfs_mksubvol+0x4b9/0x500 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0x11a4/0x2da0 [btrfs]
do_vfs_ioctl+0xa9/0x640
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace
33f2f83f3d5250e9 ]---
BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
BTRFS info (device sda1): forced readonly
BTRFS warning (device sda1): Skipping commit of aborted transaction.
BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown
[CAUSE]
The anonymous device pool is shared and its size is 1M. It's possible to
hit that limit if the subvolume deletion is not fast enough and the
subvolumes to be cleaned keep the ids allocated.
[WORKAROUND]
We can't avoid the anon device pool exhaustion but we can shorten the
time the id is attached to the subvolume root once the subvolume becomes
invisible to the user.
Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 16 Jun 2020 02:17:34 +0000 (10:17 +0800)]
btrfs: don't allocate anonymous block device for user invisible roots
[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted:
BTRFS: Transaction aborted (error -24)
WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
Call Trace:
create_pending_snapshots+0x82/0xa0 [btrfs]
btrfs_commit_transaction+0x275/0x8c0 [btrfs]
btrfs_mksubvol+0x4b9/0x500 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0x11a4/0x2da0 [btrfs]
do_vfs_ioctl+0xa9/0x640
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace
33f2f83f3d5250e9 ]---
BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
BTRFS info (device sda1): forced readonly
BTRFS warning (device sda1): Skipping commit of aborted transaction.
BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown
[CAUSE]
The error is EMFILE (Too many files open) and comes from the anonymous
block device allocation. The ids are in a shared pool of size 1<<20.
The ids are assigned to live subvolumes, ie. the root structure exists
in memory (eg. after creation or after the root appears in some path).
The pool could be exhausted if the numbers are not reclaimed fast
enough, after subvolume deletion or if other system component uses the
anon block devices.
[WORKAROUND]
Since it's not possible to completely solve the problem, we can only
minimize the time the id is allocated to a subvolume root.
Firstly, we can reduce the use of anon_dev by trees that are not
subvolume roots, like data reloc tree.
This patch will do extra check on root objectid, to skip roots that
don't need anon_dev. Currently it's only data reloc tree and orphan
roots.
Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sun, 28 Jun 2020 05:07:15 +0000 (13:07 +0800)]
btrfs: qgroup: export qgroups in sysfs
This patch will add the following sysfs interface:
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/referenced
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/exclusive
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/max_referenced
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/max_exclusive
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/limit_flags
Which is also available in output of "btrfs qgroup show".
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_data
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_meta_pertrans
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_meta_prealloc
The last 3 rsv related members are not visible to users, but can be very
useful to debug qgroup limit related bugs.
Also, to avoid '/' used in <qgroup_id>, the separator between qgroup
level and qgroup id is changed to '_'.
The interface is not hidden behind 'debug' as we want this interface to
be included into production build and to provide another way to read the
qgroup information besides the ioctls.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sun, 28 Jun 2020 05:07:14 +0000 (13:07 +0800)]
btrfs: use __u16 for the return value of btrfs_qgroup_level()
The qgroup level is limited to u16, so no need to use u64 for it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:46 +0000 (08:55 +0300)]
btrfs: make btrfs_qgroup_check_reserved_leak take btrfs_inode
vfs_inode is used only for the inode number everything else requires
btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use btrfs_ino ]
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Fri, 5 Jun 2020 07:41:13 +0000 (10:41 +0300)]
btrfs: make btrfs_set_inode_last_trans take btrfs_inode
Instead of making multiple calls to BTRFS_I simply take btrfs_inode as
an input paramter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:44 +0000 (08:55 +0300)]
btrfs: make prealloc_file_extent_cluster take btrfs_inode
The vfs inode is only used for a pair of inode_lock/unlock calls all
other uses call for btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Fri, 5 Jun 2020 07:51:51 +0000 (10:51 +0300)]
btrfs: remove BTRFS_I calls in btrfs_writepage_fixup_worker
All of its children functions use btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:42 +0000 (08:55 +0300)]
btrfs: make btrfs_delalloc_reserve_space take btrfs_inode
All of its children take btrfs_inode so bubble up this requirement to
btrfs_delalloc_reserve_space's interface and stop calling BTRFS_I
internally.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:41 +0000 (08:55 +0300)]
btrfs: make btrfs_check_data_free_space take btrfs_inode
Instead of calling BTRFS_I on the passed vfs_inode take btrfs_inode
directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:40 +0000 (08:55 +0300)]
btrfs: make btrfs_delalloc_release_space take btrfs_inode
It needs btrfs_inode so take it as a parameter directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:39 +0000 (08:55 +0300)]
btrfs: make btrfs_free_reserved_data_space take btrfs_inode
It only uses btrfs_inode internally so take it as a parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:38 +0000 (08:55 +0300)]
btrfs: make btrfs_free_reserved_data_space_noquota take btrfs_fs_info
No point in taking an inode only to get btrfs_fs_info from it, instead
take btrfs_fs_info directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:37 +0000 (08:55 +0300)]
btrfs: make btrfs_qgroup_reserve_data take btrfs_inode
There's only a single use of vfs_inode in a tracepoint so let's take
btrfs_inode directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:36 +0000 (08:55 +0300)]
btrfs: make btrfs_dirty_pages take btrfs_inode
There is a single use of the generic vfs_inode so let's take btrfs_inode
as a parameter and remove couple of redundant BTRFS_I() calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:35 +0000 (08:55 +0300)]
btrfs: make btrfs_set_extent_delalloc take btrfs_inode
Preparation to make btrfs_dirty_pages take btrfs_inode as parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Fri, 5 Jun 2020 07:42:10 +0000 (10:42 +0300)]
btrfs: make writepage_delalloc take btrfs_inode
Only find_lock_delalloc_range uses vfs_inode so let's take the
btrfs_inode as a parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:33 +0000 (08:55 +0300)]
btrfs: make __extent_writepage_io take btrfs_inode
It has only a single use for a generic vfs inode vs 3 for btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:32 +0000 (08:55 +0300)]
btrfs: make btrfs_new_extent_direct take btrfs_inode
This function really needs a btrfs_inode and not a generic vfs one. Take
it as a parameter and get rid of superfluous BTRFS_I() calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:31 +0000 (08:55 +0300)]
btrfs: make btrfs_create_dio_extent take btrfs_inode
Take btrfs_inode directly and stop using superfulous BTRFS_I calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:30 +0000 (08:55 +0300)]
btrfs: make btrfs_add_ordered_extent_dio take btrfs_inode
Simply forwards its argument so let's get rid of one extra BTRFS_I by
taking btrfs_inode directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:29 +0000 (08:55 +0300)]
btrfs: make btrfs_run_delalloc_range take btrfs_inode
All children now take btrfs_inode so convert it to taking it as a
parameter as well.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:28 +0000 (08:55 +0300)]
btrfs: make need_force_cow take btrfs_inode
Gets rid of superfulous BTRFS_I() calls and prepare for converting
btrfs_run_delalloc_range to using btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:27 +0000 (08:55 +0300)]
btrfs: make inode_need_compress take btrfs_inode
Simply gets rid of superfluous BTRFS_I() calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:26 +0000 (08:55 +0300)]
btrfs: make inode_can_compress take btrfs_inode
Gets rid of superfluous BTRFS_I() calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:25 +0000 (08:55 +0300)]
btrfs: make btrfs_cleanup_ordered_extents take btrfs_inode
Preparation to converting btrfs_run_delalloc_range to using btrfs_inode
without BTRFS_I() calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:24 +0000 (08:55 +0300)]
btrfs: make __endio_write_update_ordered take btrfs_inode
It really wants btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:23 +0000 (08:55 +0300)]
btrfs: make btrfs_dec_test_first_ordered_pending take btrfs_inode
It doesn't really need vfs_inode but btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:22 +0000 (08:55 +0300)]
btrfs: make cow_file_range_async take btrfs_inode
It only uses vfs inode for assigning it to the async_chunk function.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:21 +0000 (08:55 +0300)]
btrfs: make run_delalloc_nocow take btrfs_inode
It only really uses btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:20 +0000 (08:55 +0300)]
btrfs: make fallback_to_cow take btrfs_inode
It really wants btrfs_inode and is prepration to converting
run_delalloc_nocow to taking btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:19 +0000 (08:55 +0300)]
btrfs: make insert_reserved_file_extent take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>c
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:18 +0000 (08:55 +0300)]
btrfs: make btrfs_qgroup_release_data take btrfs_inode
It just forwards its argument to __btrfs_qgroup_release_data.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:17 +0000 (08:55 +0300)]
btrfs: make submit_compressed_extents take btrfs_inode
All but 3 uses require vfs_inode so convert the logic to have
btrfs_inode be the main inode struct.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:16 +0000 (08:55 +0300)]
btrfs: make btrfs_submit_compressed_write take btrfs_inode
Majority of its uses are for btrfs_inode so take it as an argument
directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:15 +0000 (08:55 +0300)]
btrfs: make btrfs_add_ordered_extent_compress take btrfs_inode
It simpy forwards its inode argument to __btrfs_add_ordered_extent which
already takes btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:14 +0000 (08:55 +0300)]
btrfs: make cow_file_range take btrfs_inode
All its children functions take btrfs_inode so convert it to taking
btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:13 +0000 (08:55 +0300)]
btrfs: make btrfs_add_ordered_extent take btrfs_inode
Preparation to converting its callers to taking btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:12 +0000 (08:55 +0300)]
btrfs: make cow_file_range_inline take btrfs_inode
It has only 2 uses for the vfs_inode - insert_inline_extent and
i_size_read. On the flipside it will allow converting its callers to
btrfs_inode, so convert it to taking btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:11 +0000 (08:55 +0300)]
btrfs: make btrfs_qgroup_free_data take btrfs_inode
It passes btrfs_inode to its callee so change the interface.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:10 +0000 (08:55 +0300)]
btrfs: make __btrfs_qgroup_release_data take btrfs_inode
It uses vfs_inode only for a tracepoint so convert its interface to take
btrfs_inode directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 3 Jun 2020 05:55:09 +0000 (08:55 +0300)]
btrfs: make qgroup_free_reserved_data take btrfs_inode
It only uses btrfs_inode so can just as easily take it as an argument.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Fri, 19 Jun 2020 12:24:51 +0000 (15:24 +0300)]
btrfs: tracepoints: convert flush states to using EM macros
Only 6 out of all flush states were being printed correctly since
only they were exported via the TRACE_DEFINE_ENUM macro. This patch
converts all flush states to use the newly introduced EM macro so that
they can all be printed correctly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
projects / platform / kernel / linux-starfive.git / log