staging: comedi: COMEDI_NI_LABPC_ISA no longer depends on VIRT_TO_BUS

After migrating ISA DMA support from the "ni_labpc" module to the new
"ni_labpc_isadma" module, the `COMEDI_NI_LABPC_ISA` configuration option
no longer depends on `VIRT_TO_BUS`, so remove the dependency.

(The new `COMEDI_NI_LABPC_ISADMA` option does depend on `VIRT_TO_BUS`
but is not configured manually and is only selected automatically if the
`VIRT_TO_BUS` and `ISA_DMA_API` options are set.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: tidy up after DMA code migration

After migrating the ISA DMA handling code to the "ni_labpc_isadma"
module, get rid of an unneeded `#include` and a couple of unused
static variables.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: migrate DMA status handling

Migrate the code for checking and handling the interrupt status handling
for ISA DMA transfers into new a new function
`labpc_handle_dma_status()` in the "ni_labpc_isadma" module.  Provide a
dummy inline function in "ni_labpc_isadma.h" if the "ni_labpc_isadma"
module is not being built.

The static function `handle_isa_dma()` also needs to move across to the
new module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: migrate labpc_drain_dma()

Move `labpc_drain_dma()` into the "ni_labpc_isadma" module.  Provide a
dummy inline function in "ni_labpc_isadma.h" if the module is not being
built.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: migrate DMA transfer set-up

Migrate the code for setting up an ISA DMA transfer into a new function
`labpc_setup_dma()` in the "ni_labpc_isadma" module.  Provide a dummy
inline function in "ni_labpc_isadma.h" if the "ni_labpc_isadma" module
is not being built.

The static function `labpc_suggest_transfer_size()` also needs to move
across to the new module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: move register defs to new file

The new "ni_labpc_isadma" module will need to access some register
definitions from "ni_labpc.c", which is not part of the module's source.
Move all the register definitions into a new, common header file
"ni_labpc_regs.h".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: use labpc_have_dma_chan()

Call the new static inline function `labpc_have_dma_chan()` from
`labpc_ai_cmd()` to check if the ISA DMA channel has been initialized,
tidying up the surrounding code and removing an `#ifdef`.  If the
"ni_labpc_isadma" module is not being built, `labpc_have_dma_chan()`
doesn't bother checking the DMA channel and just returns `false`,
allowing the compiler to optimize out a small amount of code.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_isadma: add labpc_have_dma_chan()

Add a static inline function to "ni_labpc_isadma.h" to test if a DMA
channel has been set-up, in which case `devpriv->dma_chan` will be
non-zero (where `devpriv` point to the private data for the comedi
device).  If the "ni_labpc_isadma" module is not being built, don't
bother checking `devpriv->dma_chan`; just return `false` as this may
help the compiler to optimize out some unreachable code.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: migrate DMA channel init & free

Migrate the code for requesting an ISA DMA channel and a DMA buffer, and
the code for freeing them into two new functions in the
"ni_labpc_isadma" module: `labpc_init_dma_chan()` and
`labpc_free_dma_chan()`.  Dummy inline functions are provided in
"ni_labpc_isadma.h" if the "ni_labpc_isadma" module is not being built.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_isadma: new module for ISA DMA support

It's just an empty module at the moment, selected by COMEDI_NI_LABPC_ISA
&& ISA_DMA_API && VIRT_TO_BUS, but will be populated by later patches to
migrate ISA DMA support for NI Lab-PC cards out of the "ni_labpc"
module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: don't clear cmd3 bits explicitly in labpc_ai_cmd()

`labpc_ai_cmd()` calls `labpc_cancel()` which already sets
`devpriv->cmd3` to 0.  Remove the lines from `labpc_ai_cmd()` that clear
specific bits in `devpriv->cmd3` explicitly as they have no effect.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: fix possible double-free of dma_buffer

If `labpc_attach()` allocates memory for `devpriv->dma_buffer` but fails
to request a DMA channel, it frees `devpriv->dma_buffer` but leaves the
pointer set.  Later, `labpc_detach()` frees `devpriv->dma_buffer` again,
which means it has been freed twice in this case.

Fix it by only setting `devpriv->dma_buffer` in `labpc_attach()` if the
DMA channel was requested successfully.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use a mutex when accessing driver list

Low-level comedi drivers registered with the comedi core by
`comedi_driver_register()` are linked together into a simple linked list
headed by the `comedi_drivers` variable and chained by the `next` member
of `struct comedi_driver`.  A driver is removed from the list by
`comedi_driver_unregister()`.  The driver list is iterated through by
`comedi_device_attach()` when the `COMEDI_DEVCONFIG` ioctl is used to
attach a "legacy" device to a driver, and is also iterated through by
`comedi_read()` in "proc.c" when reading "/proc/comedi".

There is currently no protection against items being added or removed
from the list while it is being iterated.  Add a mutex
`comedi_drivers_list_lock` to be locked while adding or removing an item
on the list, or when iterating through the list.

`comedi_driver_unregister()` also checks for and detaches any devices
using the driver.  This is currently done before unlinking the driver
from the list, but it makes more sense to unlink the driver from the
list first to prevent `comedi_device_attach()` attempting to use it, so
move the unlinking part to the start of the function.  Also, in
`comedi_device_attach()` hold on to the mutex until we've finished
attempting to attach the device to avoid it interfering with the
detachment in `comedi_driver_unregister()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: return void from comedi_driver_unregister()

'Unregister' functions generally return `void`.
`comedi_driver_unregister()` currently returns an `int` errno value.
Nothing looks at the return value.  Change the return type to `void`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl724: add support for the PCM-IO48 PC/104 board

This driver can support the WinSystems PCM-IO48 PC/104 board. That
board has two 8255 devices providing 48 digital I/O channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: this is an ISA board not a PCI board

The Intelligent Instrumentation PCI-20001C board is a legacy PC/XT/AT
8-bit ISA board not a PCI board.  The "PCI" appears to mean "Personal
Computer Instrumentation".

Move the Kconfig option into the COMEDI_ISA group.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: do not include <linux/delay.h> if its not needed

Some of the comedi files include this header but don't need it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers do not need <linux/ioport.h>

All the ioport resources are managed by the comedi core. None of
the drivers depend on <linux/ioport.h>. Remove the includes.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't rely on comedidev.h to include headers

comedidev.h is the main kernel header for comedi. Every comedi
driver includes this header which then includes a number of
<linux/*> headers. All the drivers need <linux/module.h> and some
of them need <linux/delay.h>. The rest are not needed by any of
the drivers.

Remove all the includes in comedidev.h except for <linux/dma-mapping.h>,
which is needed to pick up the enum dma_data_direction for the
comedi_subdevice definition, and "comedi.h", which is the uapi
header for comedi.

Add <linux/module.h> to all the comedi drivers and <linux/delay.h>
to the couple that need it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use comedi_alloc_devpriv()

Use the helper function to allocate memory and set the comedi_device
private data pointer.

This removes the dependency on slab.h from most of the drivers so
remove the global #include in comedidev.h and the local #include
in some of the drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: introduce comedi_alloc_devpriv()

Introduce a helper function to allocate memory and set the
comedi_device private data pointer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unused "helper" macros

This removes a bunch of unused helper macros in the kp30.h file as they
were not being used anywhere, and they better not be used in the future.

Cc: Peng Tao <tao.peng@emc.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: use ERR_CAST() function

use ERR_CAST() function instead of ERR_PTR() and PTR_ERR()
found using coccinelle and err_cast.cocci

Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix typo in printk

Correct spelling typo in printk within staging/lustre

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: Keep resend FLocks

FLocks requests (particulary F_UNLCKs) can't be trashed
upon comm problems with Server/MDS nor upon kill/exit,
thus we need to keep retry/send.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2665
Lustre-change: http://review.whamcloud.com/6415
Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/scrub: purge inconsistenct objects after OI scrub

When OI scrub repaired the found inconsistency, it needs to purge the
old object out of cache; otherwise, others may still use those cached
stale information.

Original patch adds functions in obdclass that is only used by server.
Drop that part. Only merge in error handling change.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3335
Lustre-change: http://review.whamcloud.com/6697
Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdt: HSM on disk actions record

HSM coordinator memorizes all actions in a llog
This patch implements the methods needed to create
update display these records.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3339
Lustre-change: http://review.whamcloud.com/6529
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/style: removes obsolete EXPORT_SYMTAB macros v2

EXPORT_SYMTAB is obsolete after 2.4 kernel, this patch removes
EXPORT_SYMTAB from the source code again.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1347
Lustre-change: http://review.whamcloud.com/6739
Signed-off-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: Liu Xuezhao <xuezhao.liu@emc.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: Anonymous dentry incorrectly identified as root

When exporting Lustre via NFS on SLES11SP2, this check incorrectly identifies
anonymous dentries as root dentries.  This is due to a change in SLES11SP2
which makes the d_name.name for anonymous dentries the same as that for root
dentries.  (Details in LU-3484.)

This changes the check to directly compare the value of the dentry pointer
to the root dentry pointer found in the superblock, rather than using the name.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3484
Lustre-change: http://review.whamcloud.com/6726
Signed-off-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Alexey Shvetsov <alexxy@gentoo.org>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: error of listxattr when buffer is small

According to the standard, listxattr(2) should return -1
and errno should be set to ERANGE if the size of the list
buffer is too small to hold the result. However ll_listxattr()
will return a value bigger than the size of buffer in some cases.

Let's assume listxattr(2) returns SIZE when it is called with a
large enough list buffer. If it's called again with a list buffer
whose size is smaller than SIZE but bigger than (SIZE - 12), then
listxattr(2) will return SIZE too. This patch fixes the problem.
Original patch by Li Xi <pkuelelixi@gmail.com>

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3403
Lustre-change: http://review.whamcloud.com/6463
Signed-off-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Li Xi <pkuelelixi@gmail.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: return valid fsid for statfs

Lustre uses 64-bits inode number to identify object on client side.
When re-export Lustre via NFS, NFS will detect whether support fsid
via statfs(). For the non-support case, it will only recognizes and
packs low 32-bits inode number in nfs handle. Such handle cannot be
used to locate the object properly.

To avoid patch linux kernel, Lustre client should generate fsid and
return it via statfs() to up layer.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2904
Lustre-change: http://review.whamcloud.com/6493
Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: be more careful processing server name

Because whole options line gets passed to exclude processing, don't
search from end of passed in argument to determine fsname at
beginning.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2200
Lustre-change: http://review.whamcloud.com/6197
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lmv: fix duplicate directory entries

Previously, I accidentally introduced a new way for duplicate
directory entries to be returned from readdir().  That patch fails
to properly decrement the nlupgs counter when breaking out of the
inner-for loop.  This accounting error causes an extra iteration
of the inner-for loop when processing the next cfs page and a bad
ldp_hash_end value is then saved in the lu_dirpage.  To fix this,
always decrement the nlupgs counter on entry into the inner loop.

Note: this bug only affects architectures with > 4k-sized pages, e.g.
PowerPC.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3182
Lustre-change: http://review.whamcloud.com/6405
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/procfs: return -ENOMEM from lprocfs_register()

In lprocfs_register(), if proc_mkdir() fails then return
ERR_PTR(-ENOMEM) rather than NULL and hold _lprocfs_mutex for the
whole function.  In lprocfs_remove_nolock() return early if the entry
is an error pointer. Improve error handling around lprocfs_register()
in a few spots.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2650
Lustre-change: http://review.whamcloud.com/5161
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fld: prepare FLD module for client server split

Split FLD server from client, fld_{handler,index}.c are not compliled
unless server support is enabled.  Do not include dt_object.h or
lustre_mdt.h in lustre_fld.h and fix the minor breakages caused by
this elsewhere.  Generally cleanup includes in lustre/fld.

Signed-off-by: Liu Xuezhao <xuezhao.liu@emc.com>
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1330
Lustre-change: http://review.whamcloud.com/2675
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lnet: remove empty file lnet/lnet/api-errno.c

The file is empty. We can just remove it.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2335
Lustre-change: http://review.whamcloud.com/5880
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: Fix flock deadlock detection race

Deadlock isn't detected if 2 threads are trying to
grant 2 locks which deadlock on each other.
They call ldlm_flock_deadlock() simultaneously
and deadlock ins't detected.

The soulition is to add lock to blocking list before
calling ldlm_flock_deadlock()

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1602
Lustre-change: http://review.whamcloud.com/3277
Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Reviewed-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Reviewed-by: Bruce Korb <bruce_korb@xyratex.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: call simple_setattr() from ll_md_setattr()

This partially reverts the change from "LU-2482 layout: introduce new
layout for released files" by calling simple_setattr() from
ll_md_setattr() without ATTR_SIZE set. Doing so avoids failed
assertions in osc_page_delete(). Disable truncates on released files
and modify sanity 229 accordingly.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3448
Lustre-change: http://review.whamcloud.com/6643
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdt: duplicate link names in directory

When creating a hard link to a file, the MDT/MDD/OSD code does
not verify whether the target link name already exists in the
directory.  The ZFS ZAP code checks for duplicate entries. The
add_dirent_to_buf() function in ldiskfs only checks entries for
duplicates while it is traversing the leaf block looking for free
space.  Even if it scanned the whole leaf block, this would not
work for non-htree directories since there is no guarantee that
the name is being inserted into the same leaf block.

To fix this, link should check target object doesn't exist as
other creat operations.

Add sanity.sh test_31o with multiple threads racing to link a new
name into the directory, while ensuring that there is a free entry
in the leaf block that is large enough to hold the duplicate name.
This needs to be racy, because otherwise the client VFS will see
the existing name and not send the RPC to the MDS, hiding the bug.

Add DLDLMRES/PLDLMRES macros for printing the whole lock resource
name (including the name hash) in LDLM_DEBUG() messages in a format
similar to DFID/PFID so they can be found in debug logs more easily.

The patch pickes client side change of the original patch, which only
contains the DLM printk part.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2901
Lustre-change: http://review.whamcloud.com/6591
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/crypto: add crc32c module loading to libcfs

This patch add automatically module loading for crc32c
when libcfs is starting.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2212
Lustre-change: http://review.whamcloud.com/4372
Signed-off-by: Alexander Boyko <alexander_boyko@xyratex.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Shuichi Ihara <sihara@ddn.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Race between start and stop service threads

When ptlrpc_start_thread fails to create a new thread, it will
finalize and free a struct ptlrpc_thread created and used here.
Considering this, it can be a problem when ptlrpc_svcpt_stop_thread
is driven and handles the struct ptlrpc_thread right after or right
before failure of cfs_create_thread. Because this situation let
the both of ptlrpc_start_thread and ptlrpc_svcpt_stop_threads
access the freed ptlrpc_thread and cause OS panic. Or, it may
happen that ptlrpc_svcpt_stop_threads waits forever holding an
already-freed waitq.

This patch adds an error handling into ptlrpc_start_thread to fix
this problem.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2889
Lustre-change: http://review.whamcloud.com/5552
Signed-off-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: Check return code for lu_kmem_init

lu_kmem_init can fail and returns has a return code.
Check for this return code in lu_kmem_init.

This issue was found during 2gb VM Racer testing

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3063
Lustre-change: http://review.whamcloud.com/6514
Signed-off-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lfsck: LFSCK 1.5 technical debts (3)

Original patch resolves some LFSCK 1.5 technical debts, including:
1) Check and remove repeated linkea entries.
2) Merge some "goto" branches to make the code more readable.
3) Some comments about object's nlink inconsistency processing.

This patch picks the obd flags change.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2915
Lustre-change: http://review.whamcloud.com/6344
Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: force lvb_data update after layout change

When a file is restored the layout lock is first
associated with the released layout and after restore
it has to be assocaited with the new layout. This patch
forces lvb_data update in ll_layout_fetch() even if one
is present (case for released->normal state change)

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3299
Lustre-change: http://review.whamcloud.com/6291
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fid: prepare FID module for client server split

Split FID server from client, fid_{handler,store,lib}.c are not
compliled unless server support is enabled.  Generally cleanup
includes in lustre/fid/ and reduce the need for client code to
directly or indirectly include {dt,md}_object.h.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1330
Lustre-change: http://review.whamcloud.com/2673
Signed-off-by: Liu Xuezhao <xuezhao.liu@emc.com>
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix 'code maintainability' errors

Fix 'code maintainability' issues found by Coverity version 6.5.1:
Unused pointer value (UNUSED_VALUE)
Pointer returned by function is never used.
Missing varargs init or cleanup (VARARGS)
va_end was not called for variable.

Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3107
Lustre-change: http://review.whamcloud.com/5944
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John Hammond <johnlockwoodhammond@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llapi: add user space method for lov_user_md

move lov_mds_md_size from obd_lov.h to lustre_idl.h
to have it close to lov_mds_md definition.

add lov_user_md_size() to compute lum size so
llapi and user space utils do not use kernel internal
definitions/methods

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3345
Lustre-change: http://review.whamcloud.com/6345
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdt: add macros for fid string len

add 2 macros for the length of a fid string 0xSEQ:0xOID:0xVER
and it's brace version (FID_NOBRACE_LEN, and FID_LEN)

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2782
Lustre-change: http://review.whamcloud.com/5299
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/layout: introduce new layout for released files

Released files now have a standard layout (with generation, pool, ...)
and a stripe count 0 and lmm_pattern flag LOV_PATTERN_F_RELEASED.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2482
Lustre-change: http://review.whamcloud.com/4816
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/md: fix lu_ucred.c boilerplate

In preparing Ie3a3cd99 (LU-1330 obdclass: splits server-side object
stack from client) the lu_ucred infrastructure was put in its own
file.  Fixup the boilerplate of this file to give the proper path,
short description, and authors.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1330
Lustre-change: http://review.whamcloud.com/5910
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/dlmlock: compress out unused space

* lustre/include/lustre_dlm.h: Remove all bit fields and the unused
  weighing callback procedure.  respell LDLM_AST_DISCARD_DATA as
  LDLM_FL_AST_DISCARD_DATA to match other flags.
* .gitignore: ignore emacs temporary files
* autogen.sh: rebuild the lock bits, if autogen is available.
* contrib/bit-masks/lustre_dlm_flags.def: define the ldlm_lock flags
* contrib/bit-masks/lustre_dlm_flags.tpl: template for emitting text
* contrib/bit-masks/Makefile: construct the .c and .h files
  The .c file is for constructing a crash extension and is not
  preserved.
* contrib/bit-masks/.gitignore: ignore built products
* lustre/contrib/wireshark/packet-lustre.c: use built files instead
  of local versions of the defines.

In the rest of the modified sources, replace flag field references
with bit mask references.

* lustre/osc/osc_lock.c: removed osc_lock_weigh, too

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2771
Lustre-change: http://review.whamcloud.com/5312
Signed-off-by: Bruce Korb <bruce_korb@xyratex.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: <bruce.korb@gmail.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Make quota namespace refcounting consistent

It seems quota namespace is needlessly referenced on connect,
but that's not necessary as it could not go away until entire
obd goes away.
On the other hand this extra reference disturbs other logic
depending on empty namespace having zero refcount, so this patch
drops such extra referencing.

This picks client side change of the original patch.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2924
Lustre-change: http://review.whamcloud.com/6234
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Only wake up ldlm_poold as frequently as the check interval

We used to wake up ldlm poold every second, but that's overkill,
we should just see how much time is left until next closest recalc
interval hits and sleep this much.
This will make "per-second" client grant statistic not actually
per-second, but I don't think we need any precision in that code

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2924
Lustre-change: http://review.whamcloud.com/5793
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Reviewed-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: split client namespaces into active and inactive

The main reason behind this is ldlm_poold walks all namespaces currently
no matter if there are any locks or not. On large systems this could take
quite a bit of time, esp. since ldlm_poold is currently woken up once per
second.

Now every time a client namespace loses it's last resource it is placed
into an inactive list that is not touched by ldlm_poold as pointless.
On creation of a first resource in a namespace it is placed back into
the active list.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2924
Lustre-change: http://review.whamcloud.com/5624
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: layout lock rpc must not take rpc_lock

When a client issue an RPC to get a layout lock, it
must not hold rpc_lock because in case of a restore
the rpc can be blocking for a long time

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3200
Lustre-change: http://review.whamcloud.com/6115
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Translate between host and network errnos

Lustre puts system errors (e.g., ENOTCONN) on wire as numbers
essentially specific to senders' architectures.  While this is fine
for x86-only sites, where receivers share the same error number
definition with senders, problems will arise, however, for sites
involving multiple architectures with different error number
definitions.  For instance, an ENOTCONN reply from a sparc server will
be put on wire as -57, which, for an x86 client, means EBADSLT
instead.

To solve the problem, this patch defines a set of network errors for
on-wire or on-disk uses.  These errors correspond to a subset of the
x86 system errors and share the same number definition, maintaining
compatibility with existing x86 clients and servers.

Then, either error numbers could be translated at run time, or all
host errors going on wire could be replaced with network errors in the
code.  This patch does the former by introducing both generic and
field-specific translation routines and calling them at proper places,
so that translations for existing fields are transparent.
(Personally, I tend to think the latter way might be worthwhile, as it
is more straightforward conceptually.  Do we really need so many
different errors?  Should errors returned by kernel routines really be
passed up and eventually put on wire?  There could even be security
implications in that.)

Thank Fujitsu for the original idea and their contributions that make
this available upstream.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2743
Lustre-change: http://review.whamcloud.com/5577
Signed-off-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: race in pinger (use-after-free situation)

The race is result of use-after-free situation:

~ ptlrpc_stop_pinger()          ~ ptlrpc_pinger_main()
---------------------------------------------------------------
thread_set_flags(SVC_STOPPING)
cfs_waitq_signal(pinger_thread) ...
...                             thread_set_flags(SVC_STOPPED)
l_wait_event(thread_is_stopped)
OBD_FREE_PTR(pinger_thread)
...                             cfs_waitq_signal(pinger_thread)
---------------------------------------------------------------

The memory used by pinger_thread might have been freed and
reallocated to something else, when ptlrpc_pinger_main()
used it in cvs_waitq_signal().

Signed-off-by: Li Wei <wei.g.li@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3032
Lustre-change: http://review.whamcloud.com/6040
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: print FID in lvbo_init(), lvbo_update

Print the namespace and OBD device name, as well as the first two
lock resource fields (typically the FID) if there is an error with
loading the object from disk.  This will be more important with
FID-on-OST and also the MDS.  Using fid_extract_from_res_name() isn't
possible in the LDLM code, since the lock resource may not be a FID.

Make fid_extract_quota_resid() argument order and name consistent
with other fid_*_res() functions, with FID first and resource second.

Fix a bug in ofd_lvbo_init() where NULL lvb is accessed on error.

Print FID in ofd_lvbo_update() CDEBUG() and CERROR() messages.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2193
Lustre-change: http://review.whamcloud.com/4501
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: check ll_prep_md_op_data() using IS_ERR()

In ll_file_ioctl() and ll_swap_layouts() check the result of
ll_prep_md_op_data() using IS_ERR().

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3283
Lustre-change: http://review.whamcloud.com/6275
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: A not locked mutex can be unlocked.

In case of memory pressure a not locked mutex can be unlocked
in function ll_file_open(). This is not allowed and subsequent
behavior is not defined.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3157
Lustre-change: http://review.whamcloud.com/6028
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John Hammond <johnlockwoodhammond@gmail.com>
Reviewed-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com>
Reviewed-by: Sebastien Buisson <sebastien.buisson@bull.net>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: check alloc in ll_file_data_get, ll_dir_ioctl

In ll_file_data_get() and ll_dir_ioctl() return error on failed
allocations.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2753
Lustre-change: http://review.whamcloud.com/5845
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Sebastien Buisson <sebastien.buisson@bull.net>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix 'program hangs' errors

Fix 'program hangs' defects found by Coverity version 6.5.1:
Missing unlock (LOCK)
Returning without unlocking.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3054
Lustre-change: http://review.whamcloud.com/5870
Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: missing last bit in ll_have_md_lock

Missing the last bit during INODELOCK check in ll_have_md_lock.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3385
Lustre-change: http://review.whamcloud.com/6438
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: use READ, WRITE around ll_rw_stats_tally()

In vvp_io_write_start() the stats function ll_rw_stats_tally() was
incorrectly called with a rw argument of 0. Correct this and use the
macros READ and WRITE in and around ll_rw_stats_tally() for clarity.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3384
Lustre-change: http://review.whamcloud.com/6447
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove bogus ifndef EXPORT_SYMBOL

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: drop bogus Kconfig default

Commit 4b5b4c7222 ("staging/lustre/libcfs: restore LINVRNT") added
"default false" to this Kconfig file. It was obviously meant to use
"default n" here. But we might as well drop this line, as a Kconfig bool
defaults to 'n' anyway.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: removed dead code from libcfs_string

Confirmed by cscope that the functions are not used anymore. A fresh compilation does not yield any errors.

Signed-off-by: Dragos Foianu <dragos.foianu@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove the second argument of ll_kmap_atomic()

kmap_atomic allows only one argument now, just remove the second.

Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: drop CONFIG_BROKEN

This reverts commit 0ad1ea69545b1965be4c93ee03fdc685c6beb23d

I didn't use git revert because it can not be done cleanly.
Hopefully it will be the last time we do it...

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: readdir convert to iterate

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: fix for d_compare API change

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix for invalidatepage() API change

somehow this got dropped during merge window...

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix build warnning on 32bit system

Building on 32bit system, I got warnings like below:
drivers/staging/lustre/lustre/llite/../include/lprocfs_status.h:666:7: note: expected ‘long unsigned int *’ but argument is of type ‘size_t *’
 char *lprocfs_find_named_value(const char *buffer, const char *name,

drivers/staging/lustre/lustre/lov/lov_io.c: In function ‘lov_io_rw_iter_init’:
include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default]
  (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix build error on non-x86 platforms

dump_trace() is only available on X86. Without it, Lustre's own
watchdog is broken. We can only dump current task's stack.

The client-side this code is much less likely to hit deadlocks and
it's probably OK to drop this altogether, since we hardly have any
ptlrpc threads on clients, most notable ones are ldlm cb threads
that should not really be blocking on the client anyway.

Remove libcfs watchdog for now, until the upstream kernel watchdog
can detect distributed deadlocks and dump other kernel threads.

Cc: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix build when CONFIG_UIDGID_STRICT_TYPE_CHECKS is on

kuid_t/kgid_t are wrappered when CONFIG_UIDGID_STRICT_TYPE_CHECKS is on.
Lustre build is broken because we always treat them as plain __u32.
The patch fixes it. Internally, Lustre always use __u32 uid/gid, and
convert to kuid_t/kgid_t when necessary.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: fix build erorr if CONFIG_FS_POSIX_ACL is off

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: add missing include file for prefetchw

Got below errors on s390 build:
  CC [M]  drivers/staging/lustre/lustre/llite/dir.o
drivers/staging/lustre/lustre/llite/dir.c: In function 'll_dir_filler':
drivers/staging/lustre/lustre/llite/dir.c:225:3: error: implicit declaration of function 'prefetchw' [-Werror=implicit-function-declaration]

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix build on s390

As reported by Fengguang:
In file included from drivers/staging/lustre/lustre/obdclass/../include/lustre/lustre_idl.h:99:0,
    from drivers/staging/lustre/lustre/obdclass/../include/lprocfs_status.h:46,
    from drivers/staging/lustre/lustre/obdclass/../include/obd_support.h:42,
    from drivers/staging/lustre/lustre/obdclass/../include/obd_class.h:40,
    from drivers/staging/lustre/lustre/obdclass/lu_object.c:53:
drivers/staging/lustre/lustre/obdclass/../include/lustre/lustre_user.h:356:10: error: field 'lmd_st' has incomplete type
drivers/staging/lustre/lustre/obdclass/../include/lustre/lustre_user.h:361:10: error: field 'lmd_st' has incomplete type

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix build error when !CONFIG_SMP

Three functions cfs_cpu_ht_nsiblings, cfs_cpt_cpumask and
cfs_cpt_table_print are missing if !CONFIG_SMP.

cpumask_t/nodemask_t/__read_mostly/____cacheline_aligned
are redefined.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove HIPQUAD

Stephen Rothwell reported below error on powerpc:

In file included from drivers/staging/lustre/include/linux/libcfs/libcfs.h:203:0,
                 from drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h:67,
                 from drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c:41:
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c: In function 'kiblnd_dev_need_failover':
drivers/staging/lustre/include/linux/libcfs/libcfs_debug.h:215:16: error: implicit declaration of function 'NIPQUAD' [-Werror=implicit-function-declaration]
  static struct libcfs_debug_msg_data msgdata;      \
                ^
We should just remove HIPQUAD and replace it with %pI4h.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stating/lustre: only build if configured as module

Lustre internal dependency needs to be cleaned up. Currently,
libcfs is acting as a basis of all other modules, while other
modules in lustre/ directory in turn depend on lnet modules.
It creates a dependency loop that need to be fixed. Hopefully
we will remove libcfs in the end. So just disable buildin for
now.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: don't assert ln_refcount in LNetGetId

If LNetNIInit() fails, we'll get zero ln_refcount. So fail
LNetGetId() properly instead of asserting.

We can get to it when socklnd fails to scan network interfaces,
which is possible if Lustre is builtin.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: don't assert module owner

It can well be NULL if Lustre is builtin.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix Lustre code link order

Change Makefiles to keep link order in match with Lustre module
dependency, so that when Lustre is built in kernel, we'll have
the same dependency. Otherwise we'll crash kernel if Lustre is
builtin due to missing internal dependency.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: replace num_physpages with totalram_pages

The global variable num_physpages is going away. Replace it
with totalram_pages.

Cc: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.11-rc2

Merge tag 'acpi-video-3.11' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI video support fixes from Rafael Wysocki:
 "I'm sending a separate pull request for this as it may be somewhat
  controversial.  The breakage addressed here is not really new and the
  fixes may not satisfy all users of the affected systems, but we've had
  so much back and forth dance in this area over the last several weeks
  that I think it's time to actually make some progress.

  The source of the problem is that about a year ago we started to tell
  BIOSes that we're compatible with Windows 8, which we really need to
  do, because some systems shipping with Windows 8 are tested with it
  and nothing else, so if we tell their BIOSes that we aren't compatible
  with Windows 8, we expose our users to untested BIOS/AML code paths.

  However, as it turns out, some Windows 8-specific AML code paths are
  not tested either, because Windows 8 actually doesn't use the ACPI
  methods containing them, so if we declare Windows 8 compatibility and
  attempt to use those ACPI methods, things break.  That occurs mostly
  in the backlight support area where in particular the _BCM and _BQC
  methods are plain unusable on some systems if the OS declares Windows
  8 compatibility.

  [ The additional twist is that they actually become usable if the OS
    says it is not compatible with Windows 8, but that may cause
    problems to show up elsewhere ]

  Investigation carried out by Matthew Garrett indicates that what
  Windows 8 does about backlight is to leave backlight control up to
  individual graphics drivers.  At least there's evidence that it does
  that if the Intel graphics driver is used, so we've decided to follow
  Windows 8 in that respect and allow i915 to control backlight (Daniel
  likes that part).

  The first commit from Aaron Lu makes ACPICA export the variable from
  which we can infer whether or not the BIOS believes that we are
  compatible with Windows 8.

  The second commit from Matthew Garrett prepares the ACPI video driver
  by making it initialize the ACPI backlight even if it is not going to
  be used afterward (that is needed for backlight control to work on
  Thinkpads).

  The third commit implements the actual workaround making i915 take
  over backlight control if the firmware thinks it's dealing with
  Windows 8 and is based on the work of multiple developers, including
  Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu.

  The final commit from Aaron Lu makes us follow Windows 8 by informing
  the firmware through the _DOS method that it should not carry out
  automatic brightness changes, so that brightness can be controlled by
  GUI.

  Hopefully, this approach will allow us to avoid using blacklists of
  systems that should not declare Windows 8 compatibility just to avoid
  backlight control problems in the future.

   - Change from Aaron Lu makes ACPICA export a variable which can be
     used by driver code to determine whether or not the BIOS believes
     that we are compatible with Windows 8.

   - Change from Matthew Garrett makes the ACPI video driver initialize
     the ACPI backlight even if it is not going to be used afterward
     (that is needed for backlight control to work on Thinkpads).

   - Fix from Rafael J Wysocki implements Windows 8 backlight support
     workaround making i915 take over bakclight control if the firmware
     thinks it's dealing with Windows 8.  Based on the work of multiple
     developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee,
     and Aaron Lu.

   - Fix from Aaron Lu makes the kernel follow Windows 8 by informing
     the firmware through the _DOS method that it should not carry out
     automatic brightness changes, so that brightness can be controlled
     by GUI"

* tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: no automatic brightness changes by win8-compatible firmware
  ACPI / video / i915: No ACPI backlight if firmware expects Windows 8
  ACPI / video: Always call acpi_video_init_brightness() on init
  ACPICA: expose OSI version

Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext[34] tmpfile bugfix from Ted Ts'o:
 "Fix regression caused by commit af51a2ac36d1f which added ->tmpfile()
  support (along with a similar fix for ext3)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext3: fix a BUG when opening a file with O_TMPFILE flag
  ext4: fix a BUG when opening a file with O_TMPFILE flag

ext3: fix a BUG when opening a file with O_TMPFILE flag

When we try to open a file with O_TMPFILE flag, we will trigger a bug.
The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and
this check always fails because we set ->i_nlink = 1 in
inode_init_always().  We can use the following program to trigger it:

int main(int argc, char *argv[])
{
int fd;

fd = open(argv[1], O_TMPFILE, 0666);
if (fd < 0) {
perror("open ");
return -1;
}
close(fd);
return 0;
}

The oops message looks like this:

kernel: kernel BUG at fs/ext3/namei.c:1992!
kernel: invalid opcode: 0000 [#1] SMP
kernel: Modules linked in: ext4 jbd2 crc16 cpufreq_ondemand ipv6 dm_mirror dm_region_hash dm_log dm_mod parport_pc parport serio_raw sg dcdbas pcspkr i2c_i801 ehci_pci ehci_hcd button acpi_cpufreq mperf e1000e ptp pps_core ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core ext3 jbd sd_mod ahci libahci libata scsi_mod uhci_hcd
kernel: CPU: 0 PID: 2882 Comm: tst_tmpfile Not tainted 3.11.0-rc1+ #4
kernel: Hardware name: Dell Inc. OptiPlex 780 /0V4W66, BIOS A05 08/11/2010
kernel: task: ffff880112d30050 ti: ffff8801124d4000 task.ti: ffff8801124d4000
kernel: RIP: 0010:[<ffffffffa00db5ae>] [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3]
kernel: RSP: 0018:ffff8801124d5cc8  EFLAGS: 00010202
kernel: RAX: 0000000000000000 RBX: ffff880111510128 RCX: ffff8801114683a0
kernel: RDX: 0000000000000000 RSI: ffff880111510128 RDI: ffff88010fcf65a8
kernel: RBP: ffff8801124d5d18 R08: 0080000000000000 R09: ffffffffa00d3b7f
kernel: R10: ffff8801114683a0 R11: ffff8801032a2558 R12: 0000000000000000
kernel: R13: ffff88010fcf6800 R14: ffff8801032a2558 R15: ffff8801115100d8
kernel: FS:  00007f5d172b5700(0000) GS:ffff880117c00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
kernel: CR2: 00007f5d16df15d0 CR3: 0000000110b1d000 CR4: 00000000000407f0
kernel: Stack:
kernel: 000000000000000c ffff8801048a7dc8 ffff8801114685a8 ffffffffa00b80d7
kernel: ffff8801124d5e38 ffff8801032a2558 ffff88010ce24d68 0000000000000000
kernel: ffff88011146b300 ffff8801124d5d44 ffff8801124d5d78 ffffffffa00db7e1
kernel: Call Trace:
kernel: [<ffffffffa00b80d7>] ? journal_start+0x8c/0xbd [jbd]
kernel: [<ffffffffa00db7e1>] ext3_tmpfile+0xb2/0x13b [ext3]
kernel: [<ffffffff821076f8>] path_openat+0x11f/0x5e7
kernel: [<ffffffff821c86b4>] ? list_del+0x11/0x30
kernel: [<ffffffff82065fa2>] ?  __dequeue_entity+0x33/0x38
kernel: [<ffffffff82107cd5>] do_filp_open+0x3f/0x8d
kernel: [<ffffffff82112532>] ? __alloc_fd+0x50/0x102
kernel: [<ffffffff820f9296>] do_sys_open+0x13b/0x1cd
kernel: [<ffffffff820f935c>] SyS_open+0x1e/0x20
kernel: [<ffffffff82398c02>] system_call_fastpath+0x16/0x1b
kernel: Code: 39 c7 0f 85 67 01 00 00 0f b7 03 25 00 f0 00 00 3d 00 40 00 00 74 18 3d 00 80 00 00 74 11 3d 00 a0 00 00 74 0a 83 7b 48 00 74 04 <0f> 0b eb fe 49 8b 85 50 03 00 00 4c 89 f6 48 c7 c7 c0 99 0e a0
kernel: RIP  [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3]
kernel: RSP <ffff8801124d5cc8>

Here we couldn't call clear_nlink() directly because in d_tmpfile() we
will call inode_dec_link_count() to decrease ->i_nlink.  So this commit
tries to call d_tmpfile() before ext4_orphan_add() to fix this problem.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>

ext4: fix a BUG when opening a file with O_TMPFILE flag

When we try to open a file with O_TMPFILE flag, we will trigger a bug.
The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and
this check always fails because we set ->i_nlink = 1 in
inode_init_always().  We can use the following program to trigger it:

int main(int argc, char *argv[])
{
int fd;

fd = open(argv[1], O_TMPFILE, 0666);
if (fd < 0) {
perror("open ");
return -1;
}
close(fd);
return 0;
}

The oops message looks like this:

kernel BUG at fs/ext4/namei.c:2572!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dlci bridge stp hidp cmtp kernelcapi l2tp_ppp l2tp_netlink l2tp_core sctp libcrc32c rfcomm tun fuse nfnetli
nk can_raw ipt_ULOG can_bcm x25 scsi_transport_iscsi ipx p8023 p8022 appletalk phonet psnap vmw_vsock_vmci_transport af_key vmw_vmci rose vsock atm can netrom ax25 af_rxrpc ir
da pppoe pppox ppp_generic slhc bluetooth nfc rfkill rds caif_socket caif crc_ccitt af_802154 llc2 llc snd_hda_codec_realtek snd_hda_intel snd_hda_codec serio_raw snd_pcm pcsp
kr edac_core snd_page_alloc snd_timer snd soundcore r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm
CPU: 1 PID: 1812571 Comm: trinity-child2 Not tainted 3.11.0-rc1+ #12
Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010
task: ffff88007dfe69a0 ti: ffff88010f7b6000 task.ti: ffff88010f7b6000
RIP: 0010:[<ffffffff8125ce69>]  [<ffffffff8125ce69>] ext4_orphan_add+0x299/0x2b0
RSP: 0018:ffff88010f7b7cf8  EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8800966d3020 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88007dfe70b8 RDI: 0000000000000001
RBP: ffff88010f7b7d40 R08: ffff880126a3c4e0 R09: ffff88010f7b7ca0
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801271fd668
R13: ffff8800966d2f78 R14: ffff88011d7089f0 R15: ffff88007dfe69a0
FS:  00007f70441a3740(0000) GS:ffff88012a800000(0000) knlGS:00000000f77c96c0
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000002834000 CR3: 0000000107964000 CR4: 00000000000007e0
DR0: 0000000000780000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Stack:
 0000000000002000 00000020810b6dde 0000000000000000 ffff88011d46db00
 ffff8800966d3020 ffff88011d7089f0 ffff88009c7f4c10 ffff88010f7b7f2c
 ffff88007dfe69a0 ffff88010f7b7da8 ffffffff8125cfac ffff880100000004
Call Trace:
 [<ffffffff8125cfac>] ext4_tmpfile+0x12c/0x180
 [<ffffffff811cba78>] path_openat+0x238/0x700
 [<ffffffff8100afc4>] ? native_sched_clock+0x24/0x80
 [<ffffffff811cc647>] do_filp_open+0x47/0xa0
 [<ffffffff811db73f>] ? __alloc_fd+0xaf/0x200
 [<ffffffff811ba2e4>] do_sys_open+0x124/0x210
 [<ffffffff81010725>] ? syscall_trace_enter+0x25/0x290
 [<ffffffff811ba3ee>] SyS_open+0x1e/0x20
 [<ffffffff816ca8d4>] tracesys+0xdd/0xe2
 [<ffffffff81001001>] ? start_thread_common.constprop.6+0x1/0xa0
Code: 04 00 00 00 89 04 24 31 c0 e8 c4 77 04 00 e9 43 fe ff ff 66 25 00 d0 66 3d 00 80 0f 84 0e fe ff ff 83 7b 48 00 0f 84 04 fe ff ff <0f> 0b 49 8b 8c 24 50 07 00 00 e9 88 fe ff ff 0f 1f 84 00 00 00

Here we couldn't call clear_nlink() directly because in d_tmpfile() we
will call inode_dec_link_count() to decrease ->i_nlink.  So this commit
tries to call d_tmpfile() before ext4_orphan_add() to fix this problem.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Tested-by: Darrick J. Wong <darrick.wong@oracle.com>
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'staging-3.11-rc2' of git://git./linux/kernel/git/gregkh/staging

Pull staging tree fixes from Greg KH:
 "Here are a few iio driver fixes for 3.11-rc2.  They are still spread
  across drivers/iio and drivers/staging/iio so they are coming in
  through this tree.

  I've also removed the drivers/staging/csr/ driver as the developers
  who originally sent it to me have moved on to other companies, and CSR
  still will not send us the specs for the device, making the driver
  pretty much obsolete and impossible to fix up.  Deleting it now
  prevents people from sending in lots of tiny codingsyle fixes that
  will never go anywhere.

  It also helps to offset the large lustre filesystem merge that
  happened in 3.11-rc1 in the overall 3.11.0 diffstat.  :)"

* tag 'staging-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: csr: remove driver
  iio: lps331ap: Fix wrong in_pressure_scale output value
  iio staging: fix lis3l02dq, read error handling
  staging:iio:ad7291: add missing .driver_module to struct iio_info
  iio: ti_am335x_adc: add missing .driver_module to struct iio_info
  iio: mxs-lradc: Remove useless check in read_raw
  iio: mxs-lradc: Fix misuse of iio->trig
  iio: inkern: fix iio_convert_raw_to_processed_unlocked
  iio: Fix iio_channel_has_info
  iio:trigger: device_unregister->device_del to avoid double free
  iio: dac: ad7303: fix error return code in ad7303_probe()

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull vfs fixes from Al Viro:
 "The sget() one is a long-standing bug and will need to go into -stable
  (in fact, it had been originally caught in RHEL6), the other two are
  3.11-only"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: constify dentry parameter in d_count()
  livelock avoidance in sget()
  allow O_TMPFILE to work with O_WRONLY

Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 bugfixes from Ted Ts'o:
 "Fixes for 3.11-rc2, sent at 5pm, in the professoinal style.  :-)"

I'm not sure I like this new level of "professionalism".
9-5, people, 9-5.

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: call ext4_es_lru_add() after handling cache miss
  ext4: yield during large unlinks
  ext4: make the extent_status code more robust against ENOMEM failures
  ext4: simplify calculation of blocks to free on error
  ext4: fix error handling in ext4_ext_truncate()

Merge tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 - Fix a regression against NFSv4 FreeBSD servers when creating a new
   file
 - Fix another regression in rpc_client_register()

* tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix a regression against the FreeBSD server
  SUNRPC: Fix another issue with rpc_client_register()

Merge branch 'for-linus' of git://git./linux/kernel/git/josef/btrfs-next

Pull btrfs fixes from Josef Bacik:
 "I'm playing the role of Chris Mason this week while he's on vacation.
  There are a few critical fixes for btrfs here, all regressions and
  have been tested well"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next:
  Btrfs: fix wrong write offset when replacing a device
  Btrfs: re-add root to dead root list if we stop dropping it
  Btrfs: fix lock leak when resuming snapshot deletion
  Btrfs: update drop progress before stopping snapshot dropping

vfs: constify dentry parameter in d_count()

so that it can be used in places like d_compare/d_hash
without causing a compiler warning.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

livelock avoidance in sget()

Eric Sandeen has found a nasty livelock in sget() - take a mount(2) about
to fail.  The superblock is on ->fs_supers, ->s_umount is held exclusive,
->s_active is 1.  Along comes two more processes, trying to mount the same
thing; sget() in each is picking that superblock, bumping ->s_count and
trying to grab ->s_umount.  ->s_active is 3 now.  Original mount(2)
finally gets to deactivate_locked_super() on failure; ->s_active is 2,
superblock is still ->fs_supers because shutdown will *not* happen until
->s_active hits 0.  ->s_umount is dropped and now we have two processes
chasing each other:
s_active = 2, A acquired ->s_umount, B blocked
A sees that the damn thing is stillborn, does deactivate_locked_super()
s_active = 1, A drops ->s_umount, B gets it
A restarts the search and finds the same superblock.  And bumps it ->s_active.
s_active = 2, B holds ->s_umount, A blocked on trying to get it
... and we are in the earlier situation with A and B switched places.

The root cause, of course, is that ->s_active should not grow until we'd
got MS_BORN.  Then failing ->mount() will have deactivate_locked_super()
shut the damn thing down.  Fortunately, it's easy to do - the key point
is that grab_super() is called only for superblocks currently on ->fs_supers,
so it can bump ->s_count and grab ->s_umount first, then check MS_BORN and
bump ->s_active; we must never increment ->s_count for superblocks past
->kill_sb(), but grab_super() is never called for those.

The bug is pretty old; we would've caught it by now, if not for accidental
exclusion between sget() for block filesystems; the things like cgroup or
e.g. mtd-based filesystems don't have anything of that sort, so they get
bitten.  The right way to deal with that is obviously to fix sget()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

allow O_TMPFILE to work with O_WRONLY

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge branch 'for-linus' of git://git./linux/kernel/git/rw/uml

Pull UML fixes from Richard Weinberger:
 "Special thanks goes to Toralf Föster for continuously testing UML and
  reporting issues!"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: remove dead code
  um: siginfo cleanup
  uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge cases
  um: Fix wait_stub_done() error handling
  um: Mark stub pages mapping with VM_PFNMAP
  um: Fix return value of strnlen_user()

Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "MIPS fixes for 3.11.  Half of then is for Netlogic the remainder
  touches things across arch/mips.

  Nothing really dramatic and by rc1 standards MIPS will be in fairly
  good shape with this applied.  Tested by building all MIPS defconfigs
  of which with this pull request four platforms won't build.  And yes,
  it boots also on my favorite test systems"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION
  MIPS: Octeon: Fix DT pruning bug with pip ports
  MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMP
  MIPS: tlbex: fix broken build in v3.11-rc1
  MIPS: Netlogic: Add XLP PIC irqdomain
  MIPS: Netlogic: Fix USB block's coherent DMA mask
  MIPS: tlbex: Fix typo in r3000 tlb store handler
  MIPS: BMIPS: Fix thinko to release slave TP from reset
  MIPS: Delete dead invocation of exception_exit().