review.tizen.org Git - platform/kernel/linux-rpi.git/log

Merge tag 'riscv-for-linus-6.5-rc2' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- fix a formatting error in the hwprobe documentation

- fix a spurious warning in the RISC-V PMU driver

- fix memory detection on rv32 (problem does not manifest on any known
   system)

- avoid parsing legacy parsing of I in ACPI ISA strings

* tag 'riscv-for-linus-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Don't include Zicsr or Zifencei in I from ACPI
  riscv: mm: fix truncation warning on RV32
  perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()
  Documentation: RISC-V: hwprobe: Fix a formatting error

Merge tag 'pm-6.5-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These fix hibernation (after recent changes), frequency QoS and the
  sparc cpufreq driver.

  Specifics:

   - Unbreak the /sys/power/resume interface after recent changes (Azat
     Khuzhin).

   - Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
     Yang).

   - Remove __init from cpufreq callbacks in the sparc driver, because
     they may be called after initialization too (Viresh Kumar)"

* tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: sparc: Don't mark cpufreq callbacks with __init
  PM: QoS: Restore support for default value on frequency QoS
  PM: hibernate: Fix writing maj:min to /sys/power/resume

Merge branches 'pm-sleep' and 'pm-qos'

Merge a PM QoS fix and a hibernation fix for 6.5-rc2.

- Unbreak the /sys/power/resume interface after recent changes (Azat
   Khuzhin).

- Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
   Yang).

* pm-sleep:
  PM: hibernate: Fix writing maj:min to /sys/power/resume

* pm-qos:
  PM: QoS: Restore support for default value on frequency QoS

Merge tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"There were a bunch of fixes lined up for 2 weeks, so we have quite a
  few scattered fixes, mostly amdgpu and i915, but ttm has a bunch and
  nouveau makes an appearance.

  So a bit busier than usual for rc2, but nothing seems out of the
  ordinary.

  fbdev:
   - dma: Fix documented default preferred_bpp value

  ttm:
   - fix warning that we shouldn't mix && and ||
   - never consider pinned BOs for eviction&swap
   - Don't leak a resource on eviction error
   - Don't leak a resource on swapout move error
   - fix bulk_move corruption when adding a entry

  client:
   - Send hotplug event after registering a client

  dma-buf:
   - keep the signaling time of merged fences v3
   - fix an error pointer vs NULL bug

  sched:
   - wait for all deps in kill jobs
   - call set fence parent from scheduled

  i915:
   - Don't preserve dpll_hw_state for slave crtc in Bigjoiner
   - Consider OA buffer boundary when zeroing out reports
   - Remove dead code from gen8_pte_encode
   - Fix one wrong caching mode enum usage

  amdgpu:
   - SMU i2c locking fix
   - Fix a possible deadlock in process restoration for ROCm apps
   - Disable PCIe lane/speed switching on Intel platforms (the platforms
     don't support it)

  nouveau:
   - disp: fix HDMI on gt215+
   - disp/g94: enable HDMI
   - acr: Abort loading ACR if no firmware was found
   - bring back blit subchannel for pre nv50 GPUs
   - Fix drm_dp_remove_payload() invocation

  ivpu:
   - Fix VPU register access in irq disable
   - Clear specific interrupt status bits on C0

  bridge:
   - dw_hdmi: fix connector access for scdc
   - ti-sn65dsi86: Fix auxiliary bus lifetime

  panel:
   - simple: Add connector_type for innolux_at043tn24
   - simple: Add Powertip PH800480T013 drm_display_mode flags"

* tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
  drm/nouveau: bring back blit subchannel for pre nv50 GPUs
  drm/nouveau/acr: Abort loading ACR if no firmware was found
  drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13
  drm/amd: Move helper for dynamic speed switch check out of smu13
  drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13
  drm/amd/pm: share the code around SMU13 pcie parameters update
  drm/amdgpu: avoid restore process run into dead loop.
  drm/amd/pm: fix smu i2c data read risk
  drm/nouveau/disp/g94: enable HDMI
  drm/nouveau/disp: fix HDMI on gt215+
  drm/client: Send hotplug event after registering a client
  drm/i915: Fix one wrong caching mode enum usage
  drm/i915: Remove dead code from gen8_pte_encode
  drm/i915/perf: Consider OA buffer boundary when zeroing out reports
  drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner
  drm/ttm: never consider pinned BOs for eviction&swap
  drm/fbdev-dma: Fix documented default preferred_bpp value
  dma-buf: fix an error pointer vs NULL bug
  accel/ivpu: Clear specific interrupt status bits on C0
  accel/ivpu: Fix VPU register access in irq disable
  ...

Merge tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client

Pull ceph fix from Ilya Dryomov:
"A fix to prevent a potential buffer overrun in the messenger, marked
for stable"

* tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client:
libceph: harden msgr2.1 frame segment length checks

Merge tag 'amd-drm-fixes-6.5-2023-07-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.5-2023-07-12:

amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712184009.7740-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2023-07-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Don't preserve dpll_hw_state for slave crtc in Bigjoiner (Stanislav Lisovskiy)
- Consider OA buffer boundary when zeroing out reports [perf] (Umesh Nerlige Ramappa)
- Remove dead code from gen8_pte_encode (Tvrtko Ursulin)
- Fix one wrong caching mode enum usage (Tvrtko Ursulin)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK+nHLCltaxoxVw/@tursulin-desk

Merge tag 'drm-misc-fixes-2023-07-13' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes

A couple of nouveau patches addressing improving HDMI support and
firmware handling, a fix for TTM to skip pinned BO when evicting, and a
fix for the fbdev documentation.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/nq3ke75juephbex5acfyi5t6bxv22nhmfcpfhru55haj2nv3us@gehrlmjbqgjk

Merge tag 'erofs-for-6.5-rc2-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:
"Three patches address regressions related to post-EOF unexpected
  behaviors and fsdax unavailability of chunk-based regular files.

  The other two patches mainly get rid of kmap_atomic() and simplify
  z_erofs_transform_plain().

   - Fix two unexpected loop cases when reading beyond EOF

   - Fix fsdax unavailability for chunk-based regular files

   - Get rid of the remaining kmap_atomic()

   - Minor cleanups"

* tag 'erofs-for-6.5-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix fsdax unavailability for chunk-based regular files
  erofs: avoid infinite loop in z_erofs_do_read_page() when reading beyond EOF
  erofs: avoid useless loops in z_erofs_pcluster_readmore() when reading beyond EOF
  erofs: simplify z_erofs_transform_plain()
  erofs: get rid of the remaining kmap_atomic()

Merge tag 'net-6.5-rc2' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, wireless and ebpf.

  Current release - regressions:

   - netfilter: conntrack: gre: don't set assured flag for clash entries

   - wifi: iwlwifi: remove 'use_tfh' config to fix crash

  Previous releases - regressions:

   - ipv6: fix a potential refcount underflow for idev

   - icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in
     icmp6_dev()

   - bpf: fix max stack depth check for async callbacks

   - eth: mlx5e:
      - check for NOT_READY flag state after locking
      - fix page_pool page fragment tracking for XDP

   - eth: igc:
      - fix tx hang issue when QBV gate is closed
      - fix corner cases for TSN offload

   - eth: octeontx2-af: Move validation of ptp pointer before its usage

   - eth: ena: fix shift-out-of-bounds in exponential backoff

  Previous releases - always broken:

   - core: prevent skb corruption on frag list segmentation

   - sched:
      - cls_fw: fix improper refcount update leads to use-after-free
      - sch_qfq: account for stab overhead in qfq_enqueue

   - netfilter:
      - report use refcount overflow
      - prevent OOB access in nft_byteorder_eval

   - wifi: mt7921e: fix init command fail with enabled device

   - eth: ocelot: fix oversize frame dropping for preemptible TCs

   - eth: fec: recycle pages for transmitted XDP frames"

* tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
  selftests: tc-testing: add test for qfq with stab overhead
  net/sched: sch_qfq: account for stab overhead in qfq_enqueue
  selftests: tc-testing: add tests for qfq mtu sanity check
  net/sched: sch_qfq: reintroduce lmax bound check for MTU
  wifi: cfg80211: fix receiving mesh packets without RFC1042 header
  wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()
  net: txgbe: fix eeprom calculation error
  net/sched: make psched_mtu() RTNL-less safe
  net: ena: fix shift-out-of-bounds in exponential backoff
  netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
  net/sched: flower: Ensure both minimum and maximum ports are specified
  MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
  docs: netdev: update the URL of the status page
  wifi: iwlwifi: remove 'use_tfh' config to fix crash
  xdp: use trusted arguments in XDP hints kfuncs
  bpf: cpumap: Fix memory leak in cpu_map_update_elem
  wifi: airo: avoid uninitialized warning in airo_get_rate()
  octeontx2-pf: Add additional check for MCAM rules
  net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
  net: fec: use netdev_err_once() instead of netdev_err()
  ...

Merge tag 'trace-v6.5-rc1-3' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fix some missing-prototype warnings

- Fix user events struct args (did not include size of struct)

   When creating a user event, the "struct" keyword is to denote that
   the size of the field will be passed in. But the parsing failed to
   handle this case.

- Add selftest to struct sizes for user events

- Fix sample code for direct trampolines.

   The sample code for direct trampolines attached to handle_mm_fault().
   But the prototype changed and the direct trampoline sample code was
   not updated. Direct trampolines needs to have the arguments correct
   otherwise it can fail or crash the system.

- Remove unused ftrace_regs_caller_ret() prototype.

- Quiet false positive of FORTIFY_SOURCE

   Due to backward compatibility, the structure used to save stack
   traces in the kernel had a fixed size of 8. This structure is
   exported to user space via the tracing format file. A change was made
   to allow more than 8 functions to be recorded, and user space now
   uses the size field to know how many functions are actually in the
   stack.

   But the structure still has size of 8 (even though it points into the
   ring buffer that has the required amount allocated to hold a full
   stack.

   This was fine until the fortifier noticed that the
   memcpy(&entry->caller, stack, size) was greater than the 8 functions
   and would complain at runtime about it.

   Hide this by using a pointer to the stack location on the ring buffer
   instead of using the address of the entry structure caller field.

- Fix a deadloop in reading trace_pipe that was caused by a mismatch
   between ring_buffer_empty() returning false which then asked to read
   the data, but the read code uses rb_num_of_entries() that returned
   zero, and causing a infinite "retry".

- Fix a warning caused by not using all pages allocated to store ftrace
   functions, where this can happen if the linker inserts a bunch of
   "NULL" entries, causing the accounting of how many pages needed to be
   off.

- Fix histogram synthetic event crashing when the start event is
   removed and the end event is still using a variable from it

- Fix memory leak in freeing iter->temp in tracing_release_pipe()

* tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix memory leak of iter->temp when reading trace_pipe
  tracing/histograms: Add histograms to hist_vars if they have referenced variables
  tracing: Stop FORTIFY_SOURCE complaining about stack trace caller
  ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
  ring-buffer: Fix deadloop issue on reading trace_pipe
  tracing: arm64: Avoid missing-prototype warnings
  selftests/user_events: Test struct size match cases
  tracing/user_events: Fix struct arg size match check
  x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret()
  arm64: ftrace: Add direct call trampoline samples support
  samples: ftrace: Save required argument registers in sample trampolines

Merge tag 'for-linus-6.5-rc2-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

- a cleanup of the Xen related ELF-notes

- a fix for virtio handling in Xen dom0 when running Xen in a VM

* tag 'for-linus-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/virtio: Fix NULL deref when a bridge of PCI root bus has no parent
x86/Xen: tidy xen-head.S

Merge tag 'sh-for-v6.5-tag2' of git://git./linux/kernel/git/glaubitz/sh-linux

Pull sh fixes from John Paul Adrian Glaubitz:
"The sh updates introduced multiple regressions.

  In particular, the change a8ac2961148e ("sh: Avoid using IRQ0 on SH3
  and SH4") causes several boards to hang during boot due to incorrect
  IRQ numbers.

  Geert Uytterhoeven has contributed patches that handle the virq offset
  in the IRQ code for the dreamcast, highlander and r2d boards while
  Artur Rojek has contributed a patch which handles the virq offset for
  the hd64461 companion chip"

* tag 'sh-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ
  sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux
  sh: mach-highlander: Handle virq offset in cascaded IRL demux
  sh: mach-r2d: Handle virq offset in cascaded IRL demux

tracing: Fix memory leak of iter->temp when reading trace_pipe

kmemleak reports:
  unreferenced object 0xffff88814d14e200 (size 256):
    comm "cat", pid 336, jiffies 4294871818 (age 779.490s)
    hex dump (first 32 bytes):
      04 00 01 03 00 00 00 00 08 00 00 00 00 00 00 00  ................
      0c d8 c8 9b ff ff ff ff 04 5a ca 9b ff ff ff ff  .........Z......
    backtrace:
      [<ffffffff9bdff18f>] __kmalloc+0x4f/0x140
      [<ffffffff9bc9238b>] trace_find_next_entry+0xbb/0x1d0
      [<ffffffff9bc9caef>] trace_print_lat_context+0xaf/0x4e0
      [<ffffffff9bc94490>] print_trace_line+0x3e0/0x950
      [<ffffffff9bc95499>] tracing_read_pipe+0x2d9/0x5a0
      [<ffffffff9bf03a43>] vfs_read+0x143/0x520
      [<ffffffff9bf04c2d>] ksys_read+0xbd/0x160
      [<ffffffff9d0f0edf>] do_syscall_64+0x3f/0x90
      [<ffffffff9d2000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8

when reading file 'trace_pipe', 'iter->temp' is allocated or relocated
in trace_find_next_entry() but not freed before 'trace_pipe' is closed.

To fix it, free 'iter->temp' in tracing_release_pipe().

Link: https://lore.kernel.org/linux-trace-kernel/20230713141435.1133021-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: ff895103a84ab ("tracing: Save off entry when peeking at next entry")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

libceph: harden msgr2.1 frame segment length checks

ceph_frame_desc::fd_lens is an int array. decode_preamble() thus
effectively casts u32 -> int but the checks for segment lengths are
written as if on unsigned values. While reading in HELLO or one of the
AUTH frames (before authentication is completed), arithmetic in
head_onwire_len() can get duped by negative ctrl_len and produce
head_len which is less than CEPH_PREAMBLE_LEN but still positive.
This would lead to a buffer overrun in prepare_read_control() as the
preamble gets copied to the newly allocated buffer of size head_len.

Cc: stable@vger.kernel.org
Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Thelford Williams <thelford@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>

Merge branch 'net-sched-fixes-for-sch_qfq'

Pedro Tammela says:

====================
net/sched: fixes for sch_qfq

Patch 1 fixes a regression introduced in 6.4 where the MTU size could be
bigger than 'lmax'.

Patch 3 fixes an issue where the code doesn't account for qdisc_pkt_len()
returning a size bigger then 'lmax'.

Patches 2 and 4 are selftests for the issues above.
====================

Link: https://lore.kernel.org/r/20230711210103.597831-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: tc-testing: add test for qfq with stab overhead

A packet with stab overhead greater than QFQ_MAX_LMAX should be dropped
by the QFQ qdisc as it can't handle such lengths.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: sch_qfq: account for stab overhead in qfq_enqueue

Lion says:
-------
In the QFQ scheduler a similar issue to CVE-2023-31436
persists.

Consider the following code in net/sched/sch_qfq.c:

static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
                struct sk_buff **to_free)
{
     unsigned int len = qdisc_pkt_len(skb), gso_segs;

    // ...

     if (unlikely(cl->agg->lmax < len)) {
         pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
              cl->agg->lmax, len, cl->common.classid);
         err = qfq_change_agg(sch, cl, cl->agg->class_weight, len);
         if (err) {
             cl->qstats.drops++;
             return qdisc_drop(skb, sch, to_free);
         }

    // ...

     }

Similarly to CVE-2023-31436, "lmax" is increased without any bounds
checks according to the packet length "len". Usually this would not
impose a problem because packet sizes are naturally limited.

This is however not the actual packet length, rather the
"qdisc_pkt_len(skb)" which might apply size transformations according to
"struct qdisc_size_table" as created by "qdisc_get_stab()" in
net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc.

A user may choose virtually any size using such a table.

As a result the same issue as in CVE-2023-31436 can occur, allowing heap
out-of-bounds read / writes in the kmalloc-8192 cache.
-------

We can create the issue with the following commands:

tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \
overhead 999999999 linklayer ethernet qfq
tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k
tc filter add dev $DEV parent 1: matchall classid 1:1
ping -I $DEV 1.1.1.2

This is caused by incorrectly assuming that qdisc_pkt_len() returns a
length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX.

Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: Lion <nnamrec@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: tc-testing: add tests for qfq mtu sanity check

QFQ only supports a certain bound of MTU size so make sure
we check for this requirement in the tests.

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: sch_qfq: reintroduce lmax bound check for MTU

25369891fcef deletes a check for the case where no 'lmax' is
specified which 3037933448f6 previously fixed as 'lmax'
could be set to the device's MTU without any bound checking
for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check.

Fixes: 25369891fcef ("net/sched: sch_qfq: refactor parsing of netlink parameters")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ

A recent change to start counting SuperH IRQ #s from 16 breaks support
for the Hitachi HD64461 companion chip.

Move the offchip IRQ base and HD64461 IRQ # by 16 in order to
accommodate for the new virq numbering rules.

Fixes: a8ac2961148e ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230710233132.69734-1-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux

Take into account the virq offset when translating cascaded interrupts.

Fixes: a8ac2961148e8c72 ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/7d0cb246c9f1cd24bb1f637ec5cb67e799a4c3b8.1688908227.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: mach-highlander: Handle virq offset in cascaded IRL demux

Take into account the virq offset when translating cascaded IRL
interrupts.

Fixes: a8ac2961148e8c72 ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4fcb0d08a2b372431c41e04312742dc9e41e1be4.1688908186.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: mach-r2d: Handle virq offset in cascaded IRL demux

When booting rts7751r2dplus_defconfig on QEMU, the system hangs due to
an interrupt storm on IRQ 20. IRQ 20 aka event 0x280 is a cascaded IRL
interrupt, which maps to IRQ_VOYAGER, the interrupt used by the Silicon
Motion SM501 multimedia companion chip. As rts7751r2d_irq_demux() does
not take into account the new virq offset, the interrupt is no longer
translated, leading to an unhandled interrupt.

Fix this by taking into account the virq offset when translating
cascaded IRL interrupts.

Fixes: a8ac2961148e8c72 ("sh: Avoid using IRQ0 on SH3 and SH4")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/fbfea3ad-d327-4ad5-ac9c-648c7ca3fe1f@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/2c99d5df41c40691f6c407b7b6a040d406bc81ac.1688901306.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2023-07-12

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 7 files changed, 93 insertions(+), 28 deletions(-).

The main changes are:

1) Fix max stack depth check for async callbacks, from Kumar.

2) Fix inconsistent JIT image generation, from Björn.

3) Use trusted arguments in XDP hints kfuncs, from Larysa.

4) Fix memory leak in cpu_map_update_elem, from Pu.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  xdp: use trusted arguments in XDP hints kfuncs
  bpf: cpumap: Fix memory leak in cpu_map_update_elem
  riscv, bpf: Fix inconsistent JIT image generation
  selftests/bpf: Add selftest for check_stack_max_depth bug
  bpf: Fix max stack depth check for async callbacks
====================

Link: https://lore.kernel.org/r/20230712223045.40182-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wifi: cfg80211: fix receiving mesh packets without RFC1042 header

Fix ethernet header length field after stripping the mesh header

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CT5GNZSK28AI.2K6M69OXM9RW5@syracuse/
Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
Reported-and-tested-by: Nicolas Escande <nico.escande@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230711115052.68430-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()

If there is a failure during rtw89_fw_h2c_raw() rtw89_debug_priv_send_h2c
should return negative error code instead of a positive value count.
Fix this bug by returning correct error code.

Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/tencent_AD09A61BC4DA92AD1EB0790F5C850E544D07@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: txgbe: fix eeprom calculation error

For some device types like TXGBE_ID_XAUI, *checksum computed in
txgbe_calc_eeprom_checksum() is larger than TXGBE_EEPROM_SUM. Remove the
limit on the size of *checksum.

Fixes: 049fe5365324 ("net: txgbe: Add operations to interact with firmware")
Fixes: 5e2ea7801fac ("net: txgbe: Fix unsigned comparison to zero in txgbe_calc_eeprom_checksum()")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20230711063414.3311-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-linus' of https://github.com/openrisc/linux

Pull OpenRISC fix from Stafford Horne:

- During the 6.4 cycle my fpu support work broke ABI compatibility in
   the sigcontext struct. This was noticed by musl libc developers after
   the release. This fix restores the ABI.

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Union fpcsr and oldmask in sigcontext to unbreak userspace ABI

tracing/histograms: Add histograms to hist_vars if they have referenced variables

Hist triggers can have referenced variables without having direct
variables fields. This can be the case if referenced variables are added
for trigger actions. In this case the newly added references will not
have field variables. Not taking such referenced variables into
consideration can result in a bug where it would be possible to remove
hist trigger with variables being refenced. This will result in a bug
that is easily reproducable like so

$ cd /sys/kernel/tracing
$ echo 'synthetic_sys_enter char[] comm; long id' >> synthetic_events
$ echo 'hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger
$ echo 'hist:keys=common_pid.execname,id.syscall:onmatch(raw_syscalls.sys_enter).synthetic_sys_enter($comm, id)' >> events/raw_syscalls/sys_enter/trigger
$ echo '!hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger

[  100.263533] ==================================================================
[  100.264634] BUG: KASAN: slab-use-after-free in resolve_var_refs+0xc7/0x180
[  100.265520] Read of size 8 at addr ffff88810375d0f0 by task bash/439
[  100.266320]
[  100.266533] CPU: 2 PID: 439 Comm: bash Not tainted 6.5.0-rc1 #4
[  100.267277] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[  100.268561] Call Trace:
[  100.268902]  <TASK>
[  100.269189]  dump_stack_lvl+0x4c/0x70
[  100.269680]  print_report+0xc5/0x600
[  100.270165]  ? resolve_var_refs+0xc7/0x180
[  100.270697]  ? kasan_complete_mode_report_info+0x80/0x1f0
[  100.271389]  ? resolve_var_refs+0xc7/0x180
[  100.271913]  kasan_report+0xbd/0x100
[  100.272380]  ? resolve_var_refs+0xc7/0x180
[  100.272920]  __asan_load8+0x71/0xa0
[  100.273377]  resolve_var_refs+0xc7/0x180
[  100.273888]  event_hist_trigger+0x749/0x860
[  100.274505]  ? kasan_save_stack+0x2a/0x50
[  100.275024]  ? kasan_set_track+0x29/0x40
[  100.275536]  ? __pfx_event_hist_trigger+0x10/0x10
[  100.276138]  ? ksys_write+0xd1/0x170
[  100.276607]  ? do_syscall_64+0x3c/0x90
[  100.277099]  ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  100.277771]  ? destroy_hist_data+0x446/0x470
[  100.278324]  ? event_hist_trigger_parse+0xa6c/0x3860
[  100.278962]  ? __pfx_event_hist_trigger_parse+0x10/0x10
[  100.279627]  ? __kasan_check_write+0x18/0x20
[  100.280177]  ? mutex_unlock+0x85/0xd0
[  100.280660]  ? __pfx_mutex_unlock+0x10/0x10
[  100.281200]  ? kfree+0x7b/0x120
[  100.281619]  ? ____kasan_slab_free+0x15d/0x1d0
[  100.282197]  ? event_trigger_write+0xac/0x100
[  100.282764]  ? __kasan_slab_free+0x16/0x20
[  100.283293]  ? __kmem_cache_free+0x153/0x2f0
[  100.283844]  ? sched_mm_cid_remote_clear+0xb1/0x250
[  100.284550]  ? __pfx_sched_mm_cid_remote_clear+0x10/0x10
[  100.285221]  ? event_trigger_write+0xbc/0x100
[  100.285781]  ? __kasan_check_read+0x15/0x20
[  100.286321]  ? __bitmap_weight+0x66/0xa0
[  100.286833]  ? _find_next_bit+0x46/0xe0
[  100.287334]  ? task_mm_cid_work+0x37f/0x450
[  100.287872]  event_triggers_call+0x84/0x150
[  100.288408]  trace_event_buffer_commit+0x339/0x430
[  100.289073]  ? ring_buffer_event_data+0x3f/0x60
[  100.292189]  trace_event_raw_event_sys_enter+0x8b/0xe0
[  100.295434]  syscall_trace_enter.constprop.0+0x18f/0x1b0
[  100.298653]  syscall_enter_from_user_mode+0x32/0x40
[  100.301808]  do_syscall_64+0x1a/0x90
[  100.304748]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  100.307775] RIP: 0033:0x7f686c75c1cb
[  100.310617] Code: 73 01 c3 48 8b 0d 65 3c 10 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 21 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 3c 10 00 f7 d8 64 89 01 48
[  100.317847] RSP: 002b:00007ffc60137a38 EFLAGS: 00000246 ORIG_RAX: 0000000000000021
[  100.321200] RAX: ffffffffffffffda RBX: 000055f566469ea0 RCX: 00007f686c75c1cb
[  100.324631] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 000000000000000a
[  100.328104] RBP: 00007ffc60137ac0 R08: 00007f686c818460 R09: 000000000000000a
[  100.331509] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009
[  100.334992] R13: 0000000000000007 R14: 000000000000000a R15: 0000000000000007
[  100.338381]  </TASK>

We hit the bug because when second hist trigger has was created
has_hist_vars() returned false because hist trigger did not have
variables. As a result of that save_hist_vars() was not called to add
the trigger to trace_array->hist_vars. Later on when we attempted to
remove the first histogram find_any_var_ref() failed to detect it is
being used because it did not find the second trigger in hist_vars list.

With this change we wait until trigger actions are created so we can take
into consideration if hist trigger has variable references. Also, now we
check the return value of save_hist_vars() and fail trigger creation if
save_hist_vars() fails.

Link: https://lore.kernel.org/linux-trace-kernel/20230712223021.636335-1-mkhalfella@purestorage.com
Cc: stable@vger.kernel.org
Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

net/sched: make psched_mtu() RTNL-less safe

Eric Dumazet says[1]:
-------
Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it
without holding RTNL, so dev->mtu can be changed underneath.
KCSAN could issue a warning.
-------

Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning.

[1] https://lore.kernel.org/all/CANn89iJoJO5VtaJ-2=_d2aOQhb0Xw8iBT_Cxqp2HyuS-zj6azw@mail.gmail.com/

v1 -> v2: Fix commit message

Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ena: fix shift-out-of-bounds in exponential backoff

The ENA adapters on our instances occasionally reset.  Once recently
logged a UBSAN failure to console in the process:

  UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13
  shift exponent 32 is too large for 32-bit type 'unsigned int'
  CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117
  Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017
  Workqueue: ena ena_fw_reset_device [ena]
  Call Trace:
  <TASK>
  dump_stack_lvl+0x4a/0x63
  dump_stack+0x10/0x16
  ubsan_epilogue+0x9/0x36
  __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
  ? __const_udelay+0x43/0x50
  ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena]
  wait_for_reset_state+0x54/0xa0 [ena]
  ena_com_dev_reset+0xc8/0x110 [ena]
  ena_down+0x3fe/0x480 [ena]
  ena_destroy_device+0xeb/0xf0 [ena]
  ena_fw_reset_device+0x30/0x50 [ena]
  process_one_work+0x22b/0x3d0
  worker_thread+0x4d/0x3f0
  ? process_one_work+0x3d0/0x3d0
  kthread+0x12a/0x150
  ? set_kthread_struct+0x50/0x50
  ret_from_fork+0x22/0x30
  </TASK>

Apparently, the reset delays are getting so large they can trigger a
UBSAN panic.

Looking at the code, the current timeout is capped at 5000us.  Using a
base value of 100us, the current code will overflow after (1<<29).  Even
at values before 32, this function wraps around, perhaps
unintentionally.

Cap the value of the exponent used for this backoff at (1<<16) which is
larger than currently necessary, but large enough to support bigger
values in the future.

Cc: stable@vger.kernel.org
Fixes: 4bb7f4cf60e3 ("net: ena: reduce driver load time")
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20230711013621.GE1926@templeofstupid.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tracing: Stop FORTIFY_SOURCE complaining about stack trace caller

The stack_trace event is an event created by the tracing subsystem to
store stack traces. It originally just contained a hard coded array of 8
words to hold the stack, and a "size" to know how many entries are there.
This is exported to user space as:

name: kernel_stack
ID: 4
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;

field:int size; offset:8; size:4; signed:1;
field:unsigned long caller[8]; offset:16; size:64; signed:0;

print fmt: "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n",i
(void *)REC->caller[0], (void *)REC->caller[1], (void *)REC->caller[2],
(void *)REC->caller[3], (void *)REC->caller[4], (void *)REC->caller[5],
(void *)REC->caller[6], (void *)REC->caller[7]

Where the user space tracers could parse the stack. The library was
updated for this specific event to only look at the size, and not the
array. But some older users still look at the array (note, the older code
still checks to make sure the array fits inside the event that it read.
That is, if only 4 words were saved, the parser would not read the fifth
word because it will see that it was outside of the event size).

This event was changed a while ago to be more dynamic, and would save a
full stack even if it was greater than 8 words. It does this by simply
allocating more ring buffer to hold the extra words. Then it copies in the
stack via:

memcpy(&entry->caller, fstack->calls, size);

As the entry is struct stack_entry, that is created by a macro to both
create the structure and export this to user space, it still had the caller
field of entry defined as: unsigned long caller[8].

When the stack is greater than 8, the FORTIFY_SOURCE code notices that the
amount being copied is greater than the source array and complains about
it. It has no idea that the source is pointing to the ring buffer with the
required allocation.

To hide this from the FORTIFY_SOURCE logic, pointer arithmetic is used:

ptr = ring_buffer_event_data(event);
entry = ptr;
ptr += offsetof(typeof(*entry), caller);
memcpy(ptr, fstack->calls, size);

Link: https://lore.kernel.org/all/20230612160748.4082850-1-svens@linux.ibm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230712105235.5fc441aa@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()

As comments in ftrace_process_locs(), there may be NULL pointers in
mcount_loc section:
> Some architecture linkers will pad between
> the different mcount_loc sections of different
> object files to satisfy alignments.
> Skip any NULL pointers.

After commit 20e5227e9f55 ("ftrace: allow NULL pointers in mcount_loc"),
NULL pointers will be accounted when allocating ftrace pages but skipped
before adding into ftrace pages, this may result in some pages not being
used. Then after commit 706c81f87f84 ("ftrace: Remove extra helper
functions"), warning may occur at:
WARN_ON(pg->next);

To fix it, only warn for case that no pointers skipped but pages not used
up, then free those unused pages after releasing ftrace_lock.

Link: https://lore.kernel.org/linux-trace-kernel/20230712060452.3175675-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 706c81f87f84 ("ftrace: Remove extra helper functions")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

drm/nouveau: bring back blit subchannel for pre nv50 GPUs

1ba6113a90a0 removed a lot of the kernel GPU channel, but method 0x128
was important as otherwise the GPU spams us with `CACHE_ERROR` messages.

We use the blit subchannel inside our vblank handling, so we should keep
at least this part.

v2: Only do it for NV11+ GPUs

Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/201
Fixes: 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526091052.2169044-1-kherbst@redhat.com

drm/nouveau/acr: Abort loading ACR if no firmware was found

This fixes a NULL pointer access inside nvkm_acr_oneinit in case necessary
firmware files couldn't be loaded.

Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/212
Fixes: 4b569ded09fd ("drm/nouveau/acr/ga102: initial support")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230522201838.1496622-1-kherbst@redhat.com

netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()

The simple_write_to_buffer() function is designed to handle partial
writes.  It returns negatives on error, otherwise it returns the number
of bytes that were able to be copied.  This code doesn't check the
return properly.  We only know that the first byte is written, the rest
of the buffer might be uninitialized.

There is no need to use the simple_write_to_buffer() function.
Partial writes are prohibited by the "if (*ppos != 0)" check at the
start of the function.  Just use memdup_user() and copy the whole
buffer.

Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'platform-drivers-x86-v6.5-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
"Misc small fixes and hw-id additions"

* tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet
  platform/x86: dell-ddv: Fix mangled list in documentation
  platform/x86: dell-ddv: Improve error handling
  platform/x86/amd: pmf: Add new ACPI ID AMDI0103
  platform/x86/amd: pmc: Add new ACPI ID AMDI000A
  platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx
  platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc
  platform/x86: int3472/discrete: set variable skl_int3472_regulator_second_sensor storage-class-specifier to static
  platform/x86/intel/tpmi: Prevent overflow for cap_offset
  platform/x86: wmi: Replace open coded guid_parse_and_compare()
  platform/x86: wmi: Break possible infinite loop when parsing GUID

Merge tag 'probes-fixes-v6.5-rc1' of git://git./linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

- Fix fprobe's rethook release issues:

     - Release rethook after ftrace_ops is unregistered so that the
       rethook is not accessed after free.

     - Stop rethook before ftrace_ops is unregistered so that the
       rethook is NOT used after exiting unregister_fprobe()

- Fix eprobe cleanup logic. If it attaches to multiple events and
   failes to enable one of them, rollback all enabled events correctly.

- Fix fprobe to unlock ftrace recursion lock correctly when it missed
   by another running kprobe.

- Cleanup kprobe to remove unnecessary NULL.

- Cleanup kprobe to remove unnecessary 0 initializations.

* tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  fprobe: Ensure running fprobe_exit_handler() finished before calling rethook_free()
  kernel: kprobes: Remove unnecessary ‘0’ values
  kprobes: Remove unnecessary ‘NULL’ values from correct_ret_addr
  fprobe: add unlock to match a succeeded ftrace_test_recursion_trylock
  kernel/trace: Fix cleanup logic of enable_trace_eprobe
  fprobe: Release rethook after the ftrace_ops is unregistered

Merge tag 'for-linus-2023071101' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

- AMD SFH shift-out-of-bounds fix (Basavaraj Natikar)

- avoid struct memcpy overrun warning in the hid-hyperv module (Arnd
   Bergmann)

- a quick HID kselftests script fix for our CI to be happy (Benjamin
   Tissoires)

- various fixes and additions of device IDs

* tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: amd_sfh: Fix for shift-out-of-bounds
  HID: amd_sfh: Rename the float32 variable
  HID: input: fix mapping for camera access keys
  HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed
  HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports
  HID: hyperv: avoid struct memcpy overrun warning
  selftests: hid: fix vmtests.sh not running make headers

RISC-V: Don't include Zicsr or Zifencei in I from ACPI

ACPI ISA strings are based on a specification after Zicsr and Zifencei
were split out of I, so we shouldn't be treating them as part of I. We
haven't release an ACPI-based kernel yet, so we don't need to worry
about compatibility with the old ISA strings.

Fixes: 07edc32779e3 ("RISC-V: always report presence of extensions formerly part of the base ISA")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230711224600.10879-1-palmer@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13

SMU13 overrides dynamic PCIe lane width and dynamic speed by when on
certain hosts. commit 38e4ced80479 ("drm/amd/pm: conditionally disable
pcie lane switching for some sienna_cichlid SKUs") worked around this
issue by setting up certain SKUs to set up certain limits, but the same
fundamental problem with those hosts affects all SMU11 implmentations
as well, so align the SMU11 and SMU13 driver handling.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

ring-buffer: Fix deadloop issue on reading trace_pipe

Soft lockup occurs when reading file 'trace_pipe':

  watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488]
  [...]
  RIP: 0010:ring_buffer_empty_cpu+0xed/0x170
  RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246
  RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb
  RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218
  RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f
  R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901
  R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000
  [...]
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   __find_next_entry+0x1a8/0x4b0
   ? peek_next_entry+0x250/0x250
   ? down_write+0xa5/0x120
   ? down_write_killable+0x130/0x130
   trace_find_next_entry_inc+0x3b/0x1d0
   tracing_read_pipe+0x423/0xae0
   ? tracing_splice_read_pipe+0xcb0/0xcb0
   vfs_read+0x16b/0x490
   ksys_read+0x105/0x210
   ? __ia32_sys_pwrite64+0x200/0x200
   ? switch_fpu_return+0x108/0x220
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x61/0xc6

Through the vmcore, I found it's because in tracing_read_pipe(),
ring_buffer_empty_cpu() found some buffer is not empty but then it
cannot read anything due to "rb_num_of_entries() == 0" always true,
Then it infinitely loop the procedure due to user buffer not been
filled, see following code path:

  tracing_read_pipe() {
    ... ...
    waitagain:
      tracing_wait_pipe() // 1. find non-empty buffer here
      trace_find_next_entry_inc()  // 2. loop here try to find an entry
        __find_next_entry()
          ring_buffer_empty_cpu();  // 3. find non-empty buffer
          peek_next_entry()  // 4. but peek always return NULL
            ring_buffer_peek()
              rb_buffer_peek()
                rb_get_reader_page()
                  // 5. because rb_num_of_entries() == 0 always true here
                  //    then return NULL
      // 6. user buffer not been filled so goto 'waitgain'
      //    and eventually leads to an deadloop in kernel!!!
  }

By some analyzing, I found that when resetting ringbuffer, the 'entries'
of its pages are not all cleared (see rb_reset_cpu()). Then when reducing
the ringbuffer, and if some reduced pages exist dirty 'entries' data, they
will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which
cause wrong 'overrun' count and eventually cause the deadloop issue.

To fix it, we need to clear every pages in rb_reset_cpu().

Link: https://lore.kernel.org/linux-trace-kernel/20230708225144.3785600-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: a5fb833172eca ("ring-buffer: Fix uninitialized read_stamp")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

drm/amd: Move helper for dynamic speed switch check out of smu13

This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13

Intel platforms such as Sapphire Rapids and Raptor Lake don't support
dynamic pcie lane or speed switching.

This limitation seems to carry over from one generation to another.
To be safer, disable dynamic pcie lane width and speed switching when
running on an Intel platform.

Link: https://edc.intel.com/content/www/us/en/design/products/platforms/details/raptor-lake-s/13th-generation-core-processors-datasheet-volume-1-of-2/005/pci-express-support/
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2663
Co-developed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amd/pm: share the code around SMU13 pcie parameters update

So that SMU13.0.0 and SMU13.0.7 do not need to have one copy each.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amdgpu: avoid restore process run into dead loop.

In restore process worker, pinned BO cause update PTE fail, then
the function re-schedule the restore_work. This will generate dead loop.

Signed-off-by: gaba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pm: fix smu i2c data read risk

the smu driver_table is used for all types of smu
tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..).

it is necessary to hold this lock to avoiding data tampering
during the i2c read operation.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

tracing: arm64: Avoid missing-prototype warnings

These are all tracing W=1 warnings in arm64 allmodconfig about missing
prototypes:

kernel/trace/trace_kprobe_selftest.c:7:5: error: no previous prototype for 'kprobe_trace_selftest_target' [-Werror=missing-pro
totypes]
kernel/trace/ftrace.c:329:5: error: no previous prototype for '__register_ftrace_function' [-Werror=missing-prototypes]
kernel/trace/ftrace.c:372:5: error: no previous prototype for '__unregister_ftrace_function' [-Werror=missing-prototypes]
kernel/trace/ftrace.c:4130:15: error: no previous prototype for 'arch_ftrace_match_adjust' [-Werror=missing-prototypes]
kernel/trace/fgraph.c:243:15: error: no previous prototype for 'ftrace_return_to_handler' [-Werror=missing-prototypes]
kernel/trace/fgraph.c:358:6: error: no previous prototype for 'ftrace_graph_sleep_time_control' [-Werror=missing-prototypes]
arch/arm64/kernel/ftrace.c:460:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes]
arch/arm64/kernel/ptrace.c:2172:5: error: no previous prototype for 'syscall_trace_enter' [-Werror=missing-prototypes]
arch/arm64/kernel/ptrace.c:2195:6: error: no previous prototype for 'syscall_trace_exit' [-Werror=missing-prototypes]

Move the declarations to an appropriate header where they can be seen
by the caller and callee, and make sure the headers are included where
needed.

Link: https://lore.kernel.org/linux-trace-kernel/20230517125215.930689-1-arnd@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Florent Revest <revest@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
[ Fixed ftrace_return_to_handler() to handle CONFIG_HAVE_FUNCTION_GRAPH_RETVAL case ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

selftests/user_events: Test struct size match cases

The self tests for user_events currently does not ensure that the edge
case for struct types work properly with size differences.

Add cases for mis-matching struct names and sizes to ensure they work
properly.

Link: https://lkml.kernel.org/r/20230629235049.581-3-beaub@linux.microsoft.com
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

drm/nouveau/disp/g94: enable HDMI

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Fixes: f530bc60a30b ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630160645.3984596-1-kherbst@redhat.com
Signed-off-by: Karol Herbst <kherbst@redhat.com>

drm/nouveau/disp: fix HDMI on gt215+

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Fixes: f530bc60a30b ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628212248.3798605-1-kherbst@redhat.com
Signed-off-by: Karol Herbst <kherbst@redhat.com>

riscv: mm: fix truncation warning on RV32

lkp reports below sparse warning when building for RV32:
arch/riscv/mm/init.c:1204:48: sparse: warning: cast truncates bits from
constant value (100000000 becomes 0)

IMO, the reason we didn't see this truncates bug in real world is "0"
means MEMBLOCK_ALLOC_ACCESSIBLE in memblock and there's no RV32 HW
with more than 4GB memory.

Fix it anyway to make sparse happy.

Fixes: decf89f86ecd ("riscv: try to allocate crashkern region from 32bit addressible memory")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306080034.SLiCiOMn-lkp@intel.com/
Link: https://lore.kernel.org/r/20230709171036.1906-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()

Since commit 096b52fd2bb4 ("perf: RISC-V: throttle perf events") the
perf_sample_event_took() function was added to report time spent in
overflow interrupts. If the interrupt takes too long, the perf framework
will lower the sysctl_perf_event_sample_rate and max_samples_per_tick.
When hwc->interrupts is larger than max_samples_per_tick, the
hwc->interrupts will be set to MAX_INTERRUPTS, and events will be
throttled within the __perf_event_account_interrupt() function.

However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the
PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler()
function to avoid throttling. When the perf framework unthrottled the event
in the timer interrupt handler, it triggers riscv_pmu_start() function
and causes a WARN_ON_ONCE() warning, as shown below:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e
Modules linked in:
CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1
Hardware name: SiFive (DT)
epc : riscv_pmu_start+0x7c/0x8e
  ra : riscv_pmu_start+0x28/0x8e
epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0
  gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0
  t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720
  s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000
  a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000
  a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030
  s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00
  s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000
  s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340
  s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796
  t5 : 0000000700000000 t6 : ffffaf8005269870
status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[<ffffffff80aef864>] riscv_pmu_start+0x7c/0x8e
[<ffffffff80185b56>] perf_adjust_freq_unthr_context+0x15e/0x174
[<ffffffff80188642>] perf_event_task_tick+0x88/0x9c
[<ffffffff800626a8>] scheduler_tick+0xfe/0x27c
[<ffffffff800b5640>] update_process_times+0x9a/0xba
[<ffffffff800c5bd4>] tick_sched_handle+0x32/0x66
[<ffffffff800c5e0c>] tick_sched_timer+0x64/0xb0
[<ffffffff800b5e50>] __hrtimer_run_queues+0x156/0x2f4
[<ffffffff800b6bdc>] hrtimer_interrupt+0xe2/0x1fe
[<ffffffff80acc9e8>] riscv_timer_interrupt+0x38/0x42
[<ffffffff80090a16>] handle_percpu_devid_irq+0x90/0x1d2
[<ffffffff8008a9f4>] generic_handle_domain_irq+0x28/0x36

After referring other PMU drivers like Arm, Loongarch, Csky, and Mips,
they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag
after perf_event_overflow() function nor do they add PERF_HES_STOPPED
flag checking in *_pmu_start() which don't cause this warning.

Thus, it's recommended to remove this unnecessary check in
riscv_pmu_start() function to prevent this warning.

Signed-off-by: Eric Lin <eric.lin@sifive.com>
Link: https://lore.kernel.org/r/20230710154328.19574-1-eric.lin@sifive.com
Fixes: 096b52fd2bb4 ("perf: RISC-V: throttle perf events")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

cpufreq: sparc: Don't mark cpufreq callbacks with __init

These callbacks can be called again by the cpufreq core after the driver
is initialized and must be kept around. We currently get section
mismatch build warnings.

Don't mark them with __init.

Fixes: dcfce7c2cee4 ("cpufreq: sparc: Don't allocate cpufreq_driver dynamically")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

net/sched: flower: Ensure both minimum and maximum ports are specified

The kernel does not currently validate that both the minimum and maximum
ports of a port range are specified. This can lead user space to think
that a filter matching on a port range was successfully added, when in
fact it was not. For example, with a patched (buggy) iproute2 that only
sends the minimum port, the following commands do not return an error:

# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass

# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass

# tc filter show dev swp1 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
   eth_type ipv4
   ip_proto udp
   not_in_hw
         action order 1: gact action pass
          random type none pass val 0
          index 1 ref 1 bind 1

filter protocol ip pref 1 flower chain 0 handle 0x2
   eth_type ipv4
   ip_proto udp
   not_in_hw
         action order 1: gact action pass
          random type none pass val 0
          index 2 ref 1 bind 1

Fix by returning an error unless both ports are specified:

# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
Error: Both min and max source ports must be specified.
We have an error talking to the kernel

# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
Error: Both min and max destination ports must be specified.
We have an error talking to the kernel

Fixes: 5c72299fba9d ("net: sched: cls_flower: Classify packets using port ranges")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
igc: Fix corner cases for TSN offload

Florian Kauer says:

The igc driver supports several different offloading capabilities
relevant in the TSN context. Recent patches in this area introduced
regressions for certain corner cases that are fixed in this series.

Each of the patches (except the first one) addresses a different
regression that can be separately reproduced. Still, they have
overlapping code changes so they should not be separately applied.

Especially #4 and #6 address the same observation,
but both need to be applied to avoid TX hang occurrences in
the scenario described in the patches.
====================

Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER

linux-arm-msm is the list most people subscribe to in order to receive
updates about Qualcomm related drivers. Make sure changes for the
Qualcomm ethernet driver make it there.

Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230710195240.197047-1-ahalaney@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

docs: netdev: update the URL of the status page

Move the status page from vger to the same server as mailbot.

Link: https://lore.kernel.org/r/20230710174636.1174684-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wifi: iwlwifi: remove 'use_tfh' config to fix crash

This is equivalent to 'gen2', and it was always confusing to have
two identical config entries. The split config patch actually had
been originally developed after removing 'use_tfh" and didn't add
the use_tfh in the new configs as they'd later been copied to the
new files. Thus the easiest way to fix the init crash here now is
to just remove use_tfh (which is erroneously unset in most of the
configs now) and use 'gen2' in the code instead.

There's possibly still an unwind error in iwl_txq_gen2_init() as
it crashes if TXQ 0 fails to initialize, but we can deal with it
later since the original failure is due to the use_tfh confusion.

Tested-by: Xi Ruoyao <xry111@xry111.site>
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217622
Link: https://lore.kernel.org/all/9274d9bd3d080a457649ff5addcc1726f08ef5b2.camel@xry111.site/
Link: https://lore.kernel.org/all/CAAJw_Zug6VCS5ZqTWaFSr9sd85k%3DtyPm9DEE%2BmV%3DAKoECZM%2BsQ@mail.gmail.com/
Fixes: 19898ce9cf8a ("wifi: iwlwifi: split 22000.c into multiple files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230710145038.84186-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

xdp: use trusted arguments in XDP hints kfuncs

Currently, verifier does not reject XDP programs that pass NULL pointer to
hints functions. At the same time, this case is not handled in any driver
implementation (including veth). For example, changing

bpf_xdp_metadata_rx_timestamp(ctx, &timestamp);

to

bpf_xdp_metadata_rx_timestamp(ctx, NULL);

in xdp_metadata test successfully crashes the system.

Add KF_TRUSTED_ARGS flag to hints kfunc definitions, so driver code
does not have to worry about getting invalid pointers.

Fixes: 3d76a4d3d4e5 ("bpf: XDP metadata RX kfuncs")
Reported-by: Stanislav Fomichev <sdf@google.com>
Closes: https://lore.kernel.org/bpf/ZKWo0BbpLfkZHbyE@google.com/
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230711105930.29170-1-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: cpumap: Fix memory leak in cpu_map_update_elem

Syzkaller reported a memory leak as follows:

BUG: memory leak
unreferenced object 0xff110001198ef748 (size 192):
  comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s)
  hex dump (first 32 bytes):
    00 00 00 00 4a 19 00 00 80 ad e3 e4 fe ff c0 00  ....J...........
    00 b2 d3 0c 01 00 11 ff 28 f5 8e 19 01 00 11 ff  ........(.......
  backtrace:
    [<ffffffffadd28087>] __cpu_map_entry_alloc+0xf7/0xb00
    [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0
    [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520
    [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720
    [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90
    [<ffffffffb029cc80>] do_syscall_64+0x30/0x40
    [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

BUG: memory leak
unreferenced object 0xff110001198ef528 (size 192):
  comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffffadd281f0>] __cpu_map_entry_alloc+0x260/0xb00
    [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0
    [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520
    [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720
    [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90
    [<ffffffffb029cc80>] do_syscall_64+0x30/0x40
    [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

BUG: memory leak
unreferenced object 0xff1100010fd93d68 (size 8):
  comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s)
  hex dump (first 8 bytes):
    00 00 00 00 00 00 00 00                          ........
  backtrace:
    [<ffffffffade5db3e>] kvmalloc_node+0x11e/0x170
    [<ffffffffadd28280>] __cpu_map_entry_alloc+0x2f0/0xb00
    [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0
    [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520
    [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720
    [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90
    [<ffffffffb029cc80>] do_syscall_64+0x30/0x40
    [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

In the cpu_map_update_elem flow, when kthread_stop is called before
calling the threadfn of rcpu->kthread, since the KTHREAD_SHOULD_STOP bit
of kthread has been set by kthread_stop, the threadfn of rcpu->kthread
will never be executed, and rcpu->refcnt will never be 0, which will
lead to the allocated rcpu, rcpu->queue and rcpu->queue->queue cannot be
released.

Calling kthread_stop before executing kthread's threadfn will return
-EINTR. We can complete the release of memory resources in this state.

Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230711115848.2701559-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

wifi: airo: avoid uninitialized warning in airo_get_rate()

Quieten a gcc (11.3.0) build error or warning by checking the function
call status and returning -EBUSY if the function call failed.
This is similar to what several other wireless drivers do for the
SIOCGIWRATE ioctl call when there is a locking problem.

drivers/net/wireless/cisco/airo.c: error: 'status_rid.currentXmitRate' is used uninitialized [-Werror=uninitialized]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/39abf2c7-24a-f167-91da-ed4c5435d1c4@linux-m68k.org
Link: https://lore.kernel.org/r/20230709133154.26206-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

PM: QoS: Restore support for default value on frequency QoS

Commit 8d36694245f2 ("PM: QoS: Add check to make sure CPU freq is
non-negative") makes sure CPU freq is non-negative to avoid negative
value converting to unsigned data type. However, when the value is
PM_QOS_DEFAULT_VALUE, pm_qos_update_target specifically uses
c->default_value which is set to FREQ_QOS_MIN/MAX_DEFAULT_VALUE when
cpufreq_policy_alloc is executed, for this case handling.

Adding check for PM_QOS_DEFAULT_VALUE to let default setting work will
fix this problem.

Fixes: 8d36694245f2 ("PM: QoS: Add check to make sure CPU freq is non-negative")
Link: https://lore.kernel.org/lkml/20230626035144.19717-1-Chung-kai.Yang@mediatek.com/
Link: https://lore.kernel.org/lkml/20230627071727.16646-1-Chung-kai.Yang@mediatek.com/
Link: https://lore.kernel.org/lkml/CAJZ5v0gxNOWhC58PHeUhW_tgf6d1fGJVZ1x91zkDdht11yUv-A@mail.gmail.com/
Signed-off-by: Chungkai Yang <Chung-kai.Yang@mediatek.com>
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

PM: hibernate: Fix writing maj:min to /sys/power/resume

resume_store() first calls lookup_bdev() and after tries to handle
maj:min, but it does not reset the error before, hence if you will write
maj:min you will get ENOENT:

# echo 259:2 >| /sys/power/resume
bash: echo: write error: No such file or directory

This also should fix hiberation via systemd, since it uses this way.

Fixes: 1e8c813b083c4 ("PM: hibernate: don't use early_lookup_bdev in resume_store")
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Documentation: RISC-V: hwprobe: Fix a formatting error

I'm not sure what I was trying to do with the ':'s, but they're just
rendered to HTML which looks odd. This makes "fence.i" look like
"mvendorid" and such, which is seems reasonable to me.

Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230710193329.2742-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

erofs: fix fsdax unavailability for chunk-based regular files

DAX can be used to share page cache between VMs, reducing guest memory
overhead. And chunk based data format is widely used for VM and
container image. So enable dax support for it, make erofs better used
for VM scenarios.

Fixes: c5aa903a59db ("erofs: support reading chunk-based uncompressed files")
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230711062130.7860-1-yinxin.x@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

erofs: avoid infinite loop in z_erofs_do_read_page() when reading beyond EOF

z_erofs_do_read_page() may loop infinitely due to the inappropriate
truncation in the below statement. Since the offset is 64 bits and min_t()
truncates the result to 32 bits. The solution is to replace unsigned int
with a 64-bit type, such as erofs_off_t.
    cur = end - min_t(unsigned int, offset + end - map->m_la, end);

    - For example:
        - offset = 0x400160000
        - end = 0x370
        - map->m_la = 0x160370
        - offset + end - map->m_la = 0x400000000
        - offset + end - map->m_la = 0x00000000 (truncated as unsigned int)
    - Expected result:
        - cur = 0
    - Actual result:
        - cur = 0x370

Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230710093410.44071-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

erofs: avoid useless loops in z_erofs_pcluster_readmore() when reading beyond EOF

z_erofs_pcluster_readmore() may take a long time to loop when the page
offset is large enough, which is unnecessary should be prevented.

For example, when the following case is encountered, it will loop 4691368
times, taking about 27 seconds:
- offset = 19217289215
- inode_size = 1442672

Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Fixes: 386292919c25 ("erofs: introduce readmore decompression strategy")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230710042531.28761-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

erofs: simplify z_erofs_transform_plain()

Use memcpy_to_page() instead of open-coding them.

In addition, add a missing flush_dcache_page() even though almost all
modern architectures clear `PG_dcache_clean` flag for new file cache
pages so that it doesn't change anything in practice.

Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230627161240.331-2-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

erofs: get rid of the remaining kmap_atomic()

It's unnecessary to use kmap_atomic() compared with kmap_local_page().
In addition, kmap_atomic() is deprecated now.

Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230627161240.331-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

drm/client: Send hotplug event after registering a client

Generate a hotplug event after registering a client to allow the
client to configure its display. Remove the hotplug calls from the
existing clients for fbdev emulation. This change fixes a concurrency
bug between registering a client and receiving events from the DRM
core. The bug is present in the fbdev emulation of all drivers.

The fbdev emulation currently generates a hotplug event before
registering the client to the device. For each new output, the DRM
core sends an additional hotplug event to each registered client.

If the DRM core detects first output between sending the artificial
hotplug and registering the device, the output's hotplug event gets
lost. If this is the first output, the fbdev console display remains
dark. This has been observed with amdgpu and fbdev-generic.

Fix this by adding hotplug generation directly to the client's
register helper drm_client_register(). Registering the client and
receiving events are serialized by struct drm_device.clientlist_mutex.
So an output is either configured by the initial hotplug event, or
the client has already been registered.

The bug was originally added in commit 6e3f17ee73f7 ("drm/fb-helper:
generic: Call drm_client_add() after setup is done"), in which adding
a client and receiving a hotplug event switched order. It was hidden,
as most hardware and drivers have at least on static output configured.
Other drivers didn't use the internal DRM client or still had struct
drm_mode_config_funcs.output_poll_changed set. That callback handled
hotplug events as well. After not setting the callback in amdgpu in
commit 0e3172bac3f4 ("drm/amdgpu: Don't set struct
drm_driver.output_poll_changed"), amdgpu did not show a framebuffer
console if output events got lost. The bug got copy-pasted from
fbdev-generic into the other fbdev emulation.

Reported-by: Moritz Duge <MoritzDuge@kolahilft.de>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649
Fixes: 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done")
Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Fixes: b79fe9abd58b ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Fixes: 63c381552f69 ("drm/armada: Implement fbdev emulation as in-kernel client")
Fixes: 49953b70e7d3 ("drm/exynos: Implement fbdev emulation as in-kernel client")
Fixes: 8f1aaccb04b7 ("drm/gma500: Implement client-based fbdev emulation")
Fixes: 940b869c2f2f ("drm/msm: Implement fbdev emulation as in-kernel client")
Fixes: 9e69bcd88e45 ("drm/omapdrm: Implement fbdev emulation as in-kernel client")
Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation")
Fixes: 71ec16f45ef8 ("drm/tegra: Implement fbdev emulation as in-kernel client")
Fixes: 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Moritz Duge <MoritzDuge@kolahilft.de>
Tested-by: Torsten Krah <krah.tm@gmail.com>
Tested-by: Paul Schyska <pschyska@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de

octeontx2-pf: Add additional check for MCAM rules

Due to hardware limitation, MCAM drop rule with
ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting
such rules.

Fixes: dce677da57c0 ("octeontx2-pf: Add vlan-etype to ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20230710103027.2244139-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet

Add info for the Archos 101 Cesium Educ tablet
It was tested using gslx680_ts_acpi module
PR at https://github.com/onitake/gsl-firmware/pull/210 for the firmware

Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Link: https://lore.kernel.org/r/20230707141425.21473-1-tomlohave@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: dell-ddv: Fix mangled list in documentation

Add missing empty line necessary for sphinx to recognize
the list. Also reword the first entry a little bit.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230707010333.12954-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: dell-ddv: Improve error handling

If for some reason a external function returns -ENODEV,
no error message is being displayed because the driver
assumes that -ENODEV can only be returned internally if
no sensors, etc where found.
Fix this by explicitly returning 0 in such a case since
missing hardware is no error. Also remove the now obsolete
check for -ENODEV.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230707010333.12954-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86/amd: pmf: Add new ACPI ID AMDI0103

Add new ACPI ID AMDI0103 used by upcoming AMD platform to the PMF
supported list of devices.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230711100903.384151-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86/amd: pmc: Add new ACPI ID AMDI000A

Add new ACPI ID AMDI000A used by upcoming AMD platform to the pmc
supported list of devices

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230711100344.383948-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx

HP 15s-eq2xxx is an older Lucienne laptop that has a problem resuming
from s2idle when IOMMU is enabled. The symptoms very closely resemble
that of the Lenovo issues with NVME resume. Lucienne was released in
a similar timeframe as the Renoir / Cezanne Lenovo laptops and they
may have similar BIOS code.

Applying the same quirk to this system allows the system to work with
IOMMU enabled and s2idle resume to work.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2684
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230710183934.17315-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc

It turns out that some-non Lenovo systems can benefit from the quirk
introduced for Lenovo systems in commit 455cd867b85b5 ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops").

So move this quirk into running from the amd-pmc driver instead.
No intended functional changes.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230710183934.17315-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

net: dsa: Removed unneeded of_node_put in felix_parse_ports_node

Remove unnecessary of_node_put from the continue path to prevent
child node from being released twice, which could avoid resource
leak or other unexpected issues.

Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: de879a016a94 ("net: dsa: felix: add functionality when not all ports are supported")
Link: https://lore.kernel.org/r/20230710031859.36784-1-luhongfei@vivo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

drm/i915: Fix one wrong caching mode enum usage

Commit a4d86249c773 ("drm/i915/gt: Provide a utility to create a scratch
buffer") mistakenly passed in uapi I915_CACHING_CACHED as argument to
i915_gem_object_set_cache_coherency(), which actually takes internal
enum i915_cache_level.

No functional issue since the value matches I915_CACHE_LLC (1 == 1), which
is the intended caching mode, but lets clean it up nevertheless.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a4d86249c773 ("drm/i915/gt: Provide a utility to create a scratch buffer")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707125503.3965817-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 49c60b2f0867ac36fd54d513882a48431aeccae7)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Remove dead code from gen8_pte_encode

Commit 9275277d5324 ("drm/i915: use pat_index instead of cache_level")
added a dedicated gen12_pte_encode but forgot to remove the Gen12 specific
bit from gen8_pte_encode.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 9275277d5324 ("drm/i915: use pat_index instead of cache_level")
Cc: Fei Yang <fei.yang@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707124644.3965281-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 08509377dd82ead98429785509f6b52a4b5f09f5)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/perf: Consider OA buffer boundary when zeroing out reports

For reports that are not powers of 2, reports at the end of the OA
buffer may get split across the buffer boundary. When zeroing out such
reports, take the split into consideration.

v2: Use OA_BUFFER_SIZE (Ashutosh)

Fixes: 09a36015d9a0 ("drm/i915/perf: Clear out entire reports after reading if not power of 2 size")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616173402.699776-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 40b1588a750240cbe8a83117aa785d778749a77c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner

If we are using Bigjoiner dpll_hw_state is supposed to be exactly
same as for master crtc, so no need to save it's state for slave crtc.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 0ff0e219d9b8 ("drm/i915: Compute clocks earlier")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628141017.18937-1-stanislav.lisovskiy@intel.com
(cherry picked from commit cbaf758809952c95ec00e796695049babb08bb60)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge branch 'net-fec-fix-some-issues-of-ndo_xdp_xmit'

Wei Fang says:

====================
net: fec: fix some issues of ndo_xdp_xmit()

We encountered some issues when testing the ndo_xdp_xmit() interface
of the fec driver on i.MX8MP and i.MX93 platforms. These issues are
easy to reproduce, and the specific reproduction steps are as follows.

step1: The ethernet port of a board (board A) is connected to the EQOS
port of i.MX8MP/i.MX93, and the FEC port of i.MX8MP/i.MX93 is connected
to another ethernet port, such as a switch port.

step2: Board A uses the pktgen_sample03_burst_single_flow.sh to generate
and send packets to i.MX8MP/i.MX93. The command is shown below.
./pktgen_sample03_burst_single_flow.sh -i eth0 -d 192.168.6.8 -m \
56:bf:0d:68:b0:9e -s 1500

step3: i.MX8MP/i.MX93 use the xdp_redirect bfp program to redirect the
XDP frames from EQOS port to FEC port. The command is shown below.
./xdp_redirect eth1 eth0

After a few moments, the warning or error logs will be printed in the
console, for more details, please refer to the commit message of each
patch.
====================

Link: https://lore.kernel.org/r/20230706081012.2278063-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: fec: use netdev_err_once() instead of netdev_err()

In the case of heavy XDP traffic to be transmitted, the console
will print the error log continuously if there are lack of enough
BDs to accommodate the frames. The log looks like below.

[  160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!

Not only will this log be replicated and redundant, it will also
degrade XDP performance. So we use netdev_err_once() instead of
netdev_err() now.

Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: fec: increase the size of tx ring and update tx_wake_threshold

When the XDP feature is enabled and with heavy XDP frames to be
transmitted, there is a considerable probability that available
tx BDs are insufficient. This will lead to some XDP frames to be
discarded and the "NOT enough BD for SG!" error log will appear
in the console (as shown below).

[  160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!

In the case of heavy XDP traffic, sometimes the speed of recycling
tx BDs may be slower than the speed of sending XDP frames. There
may be several specific reasons, such as the interrupt is not
responsed in time, the efficiency of the NAPI callback function is
too low due to all the queues (tx queues and rx queues) share the
same NAPI, and so on.

After trying various methods, I think that increase the size of tx
BD ring is simple and effective. Maybe the best resolution is that
allocate NAPI for each queue to improve the efficiency of the NAPI
callback, but this change is a bit big and I didn't try this method.
Perheps this method will be implemented in a future patch.

This patch also updates the tx_wake_threshold of tx ring which is
related to the size of tx ring in the previous logic. Otherwise,
the tx_wake_threshold will be too high (403 BDs), which is more
likely to impact the slow path in the case of heavy XDP traffic,
because XDP path and slow path share the tx BD rings. According
to Jakub's suggestion, the tx_wake_threshold is at least equal to
tx_stop_threshold + 2 * MAX_SKB_FRAGS, if a queue of hundreds of
entries is overflowing, we should be able to apply a hysteresis
of a few tens of entries.

Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: fec: recycle pages for transmitted XDP frames

Once the XDP frames have been successfully transmitted through the
ndo_xdp_xmit() interface, it's the driver responsibility to free
the frames so that the page_pool can recycle the pages and reuse
them. However, this action is not implemented in the fec driver.
This leads to a user-visible problem that the console will print
the following warning log.

[  157.568851] page_pool_release_retry() stalled pool shutdown 1389 inflight 60 sec
[  217.983446] page_pool_release_retry() stalled pool shutdown 1389 inflight 120 sec
[  278.399006] page_pool_release_retry() stalled pool shutdown 1389 inflight 181 sec
[  338.812885] page_pool_release_retry() stalled pool shutdown 1389 inflight 241 sec
[  399.226946] page_pool_release_retry() stalled pool shutdown 1389 inflight 302 sec

Therefore, to solve this issue, we free XDP frames via xdp_return_frame()
while cleaning the tx BD ring.

Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: fec: dynamically set the NETDEV_XDP_ACT_NDO_XMIT feature of XDP

When a XDP program is installed or uninstalled, fec_restart() will
be invoked to reset MAC and buffer descriptor rings. It's reasonable
not to transmit any packet during the process of reset. However, the
NETDEV_XDP_ACT_NDO_XMIT bit of xdp_features is enabled by default,
that is to say, it's possible that the fec_enet_xdp_xmit() will be
invoked even if the process of reset is not finished. In this case,
the redirected XDP frames might be dropped and available transmit BDs
may be incorrectly deemed insufficient. So this patch disable the
NETDEV_XDP_ACT_NDO_XMIT feature by default and dynamically configure
this feature when the bpf program is installed or uninstalled.

Fixes: e4ac7cc6e5a4 ("net: fec: turn on XDP features")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

riscv, bpf: Fix inconsistent JIT image generation

In order to generate the prologue and epilogue, the BPF JIT needs to
know which registers that are clobbered. Therefore, the during
pre-final passes, the prologue is generated after the body of the
program body-prologue-epilogue. Then, in the final pass, a proper
prologue-body-epilogue JITted image is generated.

This scheme has worked most of the time. However, for some large
programs with many jumps, e.g. the test_kmod.sh BPF selftest with
hardening enabled (blinding constants), this has shown to be
incorrect. For the final pass, when the proper prologue-body-epilogue
is generated, the image has not converged. This will lead to that the
final image will have incorrect jump offsets. The following is an
excerpt from an incorrect image:

  | ...
  |     3b8:       00c50663                beq     a0,a2,3c4 <.text+0x3c4>
  |     3bc:       0020e317                auipc   t1,0x20e
  |     3c0:       49630067                jalr    zero,1174(t1) # 20e852 <.text+0x20e852>
  | ...
  |  20e84c:       8796                    c.mv    a5,t0
  |  20e84e:       6422                    c.ldsp  s0,8(sp)    # Epilogue start
  |  20e850:       6141                    c.addi16sp      sp,16
  |  20e852:       853e                    c.mv    a0,a5       # Incorrect jump target
  |  20e854:       8082                    c.jr    ra

The image has shrunk, and the epilogue offset is incorrect in the
final pass.

Correct the problem by always generating proper prologue-body-epilogue
outputs, which means that the first pass will only generate the body
to track what registers that are touched.

Fixes: 2353ecc6f91f ("bpf, riscv: add BPF JIT for RV64G")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230710074131.19596-1-bjorn@kernel.org

tracing/user_events: Fix struct arg size match check

When users register an event the name of the event and it's argument are
checked to ensure they match if the event already exists. Normally all
arguments are in the form of "type name", except for when the type
starts with "struct ". In those cases, the size of the struct is passed
in addition to the name, IE: "struct my_struct a 20" for an argument
that is of type "struct my_struct" with a field name of "a" and has the
size of 20 bytes.

The current code does not honor the above case properly when comparing
a match. This causes the event register to fail even when the same
string was used for events that contain a struct argument within them.
The example above "struct my_struct a 20" generates a match string of
"struct my_struct a" omitting the size field.

Add the struct size of the existing field when generating a comparison
string for a struct field to ensure proper match checking.

Link: https://lkml.kernel.org/r/20230629235049.581-2-beaub@linux.microsoft.com
Cc: stable@vger.kernel.org
Fixes: e6f89a149872 ("tracing/user_events: Ensure user provided strings are safely formatted")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret()

This is now unused, so can remove it.

Link: https://lore.kernel.org/linux-trace-kernel/20230623091640.21952-1-yuehaibing@huawei.com
Cc: <mark.rutland@arm.com>
Cc: <tglx@linutronix.de>
Cc: <mingo@redhat.com>
Cc: <bp@alien8.de>
Cc: <dave.hansen@linux.intel.com>
Cc: <x86@kernel.org>
Cc: <hpa@zytor.com>
Cc: <peterz@infradead.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

fprobe: Ensure running fprobe_exit_handler() finished before calling rethook_free()

Ensure running fprobe_exit_handler() has finished before
calling rethook_free() in the unregister_fprobe() so that caller can free
the fprobe right after unregister_fprobe().

unregister_fprobe() ensured that all running fprobe_entry/exit_handler()
have finished by calling unregister_ftrace_function() which synchronizes
RCU. But commit 5f81018753df ("fprobe: Release rethook after the ftrace_ops
is unregistered") changed to call rethook_free() after
unregister_ftrace_function(). So call rethook_stop() to make rethook
disabled before unregister_ftrace_function() and ensure it again.

Here is the possible code flow that can call the exit handler after
unregister_fprobe().

------
CPU1                              CPU2
call unregister_fprobe(fp)
...
                                   __fprobe_handler()
                                   rethook_hook() on probed function
unregister_ftrace_function()
                                   return from probed function
                                   rethook hooks
                                   find rh->handler == fprobe_exit_handler
                                   call fprobe_exit_handler()
rethook_free():
   set rh->handler = NULL;
return from unreigster_fprobe;
                                   call fp->exit_handler() <- (*)
------

(*) At this point, the exit handler is called after returning from
unregister_fprobe().

This fixes it as following;
------
CPU1                              CPU2
call unregister_fprobe()
...
rethook_stop():
   set rh->handler = NULL;
                                   __fprobe_handler()
                                   rethook_hook() on probed function
unregister_ftrace_function()
                                   return from probed function
                                   rethook hooks
                                   find rh->handler == NULL
                                   return from rethook
rethook_free()
return from unreigster_fprobe;
------

Link: https://lore.kernel.org/all/168873859949.156157.13039240432299335849.stgit@devnote2/
Fixes: 5f81018753df ("fprobe: Release rethook after the ftrace_ops is unregistered")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

arm64: ftrace: Add direct call trampoline samples support

The ftrace samples need per-architecture trampoline implementations
to save and restore argument registers around the calls to
my_direct_func* and to restore polluted registers (eg: x30).

These samples also include <asm/asm-offsets.h> which, on arm64, is not
necessary and redefines previously defined macros (resulting in
warnings) so these includes are guarded by !CONFIG_ARM64.

Link: https://lkml.kernel.org/r/20230427140700.625241-3-revest@chromium.org
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

samples: ftrace: Save required argument registers in sample trampolines

The ftrace-direct-too sample traces the handle_mm_fault function whose
signature changed since the introduction of the sample. Since:
commit bce617edecad ("mm: do page fault accounting in handle_mm_fault")
handle_mm_fault now has 4 arguments. Therefore, the sample trampoline
should save 4 argument registers.

s390 saves all argument registers already so it does not need a change
but x86_64 needs an extra push and pop.

This also evolves the signature of the tracing function to make it
mirror the signature of the traced function.

Link: https://lkml.kernel.org/r/20230427140700.625241-2-revest@chromium.org
Cc: stable@vger.kernel.org
Fixes: bce617edecad ("mm: do page fault accounting in handle_mm_fault")
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

openrisc: Union fpcsr and oldmask in sigcontext to unbreak userspace ABI

With commit 27267655c531 ("openrisc: Support floating point user api") I
added an entry to the struct sigcontext which caused an unwanted change
to the userspace ABI.

To fix this we use the previously unused oldmask field space for the
floating point fpcsr state. We do this with a union to restore the ABI
back to the pre kernel v6.4 ABI and keep API compatibility.

This does mean if there is some code somewhere that is setting oldmask
in an OpenRISC specific userspace sighandler it would end up setting the
floating point register status, but I think it's unlikely as oldmask was
never functional before.

Fixes: 27267655c531 ("openrisc: Support floating point user api")
Reported-by: Szabolcs Nagy <nsz@port70.net>
Closes: https://lore.kernel.org/openrisc/20230626213840.GA1236108@port70.net/
Signed-off-by: Stafford Horne <shorne@gmail.com>

Merge tag 'linux-watchdog-6.5-rc2' of git://linux-watchdog.org/linux-watchdog

Pull watchdog update from Wim Van Sebroeck:

- Add Loongson-1 watchdog dt-bindings

* tag 'linux-watchdog-6.5-rc2' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: Add Loongson-1 watchdog

Merge tag 'v6.5-p2' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"Fix a couple of regressions in af_alg and incorrect return values in
crypto/asymmetric_keys/public_key"

* tag 'v6.5-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_hash - Fix race between MORE and non-MORE sends
  KEYS: asymmetric: Fix error codes
  crypto: af_alg - Fix merging of written data into spliced pages