drm/msm/dpu: rework dpu_plane_sspp_atomic_update()

Split pipe-dependent code from dpu_plane_sspp_atomic_update() into the
separate function dpu_plane_sspp_update_pipe(). This is one of
preparational steps to add r_pipe support.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527337/
Link: https://lore.kernel.org/r/20230316161653.4106395-23-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: simplify dpu_plane_validate_src()

The plane's clipped coordinates has already been validated against FB
size in the drm_atomic_plane_check(). There is no need to check them
again. Remove corresponding checks and inline dpu_plane_validate_src().

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527364/
Link: https://lore.kernel.org/r/20230316161653.4106395-22-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: add dpu_hw_sspp_cfg to dpu_plane_state

Now as all accesses to pipe_cfg and pstate have been cleaned, add
struct dpu_hw_sspp_cfg to struct dpu_plane_state, so that
dpu_plane_atomic_check() and dpu_plane_atomic_update() do not have a
chance to disagree about src/dst rectangles (currently
dpu_plane_atomic_check() uses unclipped rectangles, while
dpu_plane_atomic_update() uses clipped rectangles calculated by
drm_atomic_helper_check_plane_state()).

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527352/
Link: https://lore.kernel.org/r/20230316161653.4106395-21-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: make _dpu_plane_calc_clk accept mode directly

Rework bandwidth/clock calculation functions to use mode directly rather
than fetching it through the plane data.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527344/
Link: https://lore.kernel.org/r/20230316161653.4106395-20-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: rewrite plane's QoS-related functions to take dpu_sw_pipe and dpu_format

Rewrite dpu_plane's QoS related functions to take struct dpu_sw_pipe and
struct dpu_format as arguments rather than fetching them from the
pstate or drm_framebuffer.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527339/
Link: https://lore.kernel.org/r/20230316161653.4106395-19-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop redundant plane dst check from dpu_crtc_atomic_check()

The helper drm_atomic_helper_check_plane_state() already checks whether
the scaled and clipped plane falls into the CRTC visible region (and
clears plane_state->visible if it doesn't). Drop the redundant check
from dpu_crtc_atomic_check().

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527343/
Link: https://lore.kernel.org/r/20230316161653.4106395-18-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: move the rest of plane checks to dpu_plane_atomic_check()

Move plane state updates from dpu_crtc_atomic_check() to the function
where they belong: to dpu_plane_atomic_check().

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527335/
Link: https://lore.kernel.org/r/20230316161653.4106395-17-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: don't use unsupported blend stages

The dpu_crtc_atomic_check() compares blending stage with DPU_STAGE_MAX
(maximum amount of blending stages supported by the driver), however we
should compare it against .max_mixer_blendstages, the maximum blend
stage supported by the mixer.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527338/
Link: https://lore.kernel.org/r/20230316161653.4106395-16-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop src_split and multirect check from dpu_crtc_atomic_check

Neither source split nor multirect are properly supported at this
moment. Both of these checks depend on normalized_zpos being equal for
several planes (which is never the case for normalized zpos).
Drop these checks to simplify dpu_crtc_atomic_check(). The actual
support for either of these features is not removed from the backend
code (sspp, ctl, etc).

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527332/
Link: https://lore.kernel.org/r/20230316161653.4106395-15-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: rename dpu_hw_sspp_cfg to dpu_sw_pipe_cfg

As struct dpu_hw_sspp_cfg describes only the source and destination
rectangles, it is a software pipe configuration now. Rename it
accordingly.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527334/
Link: https://lore.kernel.org/r/20230316161653.4106395-14-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: remove dpu_hw_fmt_layout from struct dpu_hw_sspp_cfg

Remove dpu_hw_fmt_layout instance from struct dpu_hw_sspp_cfg, leaving
only src_rect and dst_rect. This way all the pipes used by the plane
will have a common layout instance (as the framebuffer is shared between
them), while still keeping a separate src/dst rectangle configuration
for each pipe.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527329/
Link: https://lore.kernel.org/r/20230316161653.4106395-13-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: move stride programming to dpu_hw_sspp_setup_sourceaddress

Move stride programming to dpu_hw_sspp_setup_sourceaddress(), so that
dpu_hw_sspp_setup_rects() programs only source and destination
rectangles.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527330/
Link: https://lore.kernel.org/r/20230316161653.4106395-12-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: clean up SRC addresses when setting up SSPP for solid fill

Set SSPP_SRCn_ADDR registers to 0 while setting up solid fill, as we can
not be sure that the previous address is still valid.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527324/
Link: https://lore.kernel.org/r/20230316161653.4106395-11-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: pass dpu_format to _dpu_hw_sspp_setup_scaler3()

There is no need to pass full dpu_hw_sspp_cfg instance to
_dpu_hw_sspp_setup_scaler3, pass just struct dpu_format pointer.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527328/
Link: https://lore.kernel.org/r/20230316161653.4106395-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: use dpu_sw_pipe for dpu_hw_sspp callbacks

Where feasible, use dpu_sw_pipe rather than a combo of dpu_hw_sspp and
multirect_index/_mode arguments.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527333/
Link: https://lore.kernel.org/r/20230316161653.4106395-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: introduce struct dpu_sw_pipe

Wrap SSPP and multirect index/mode into a single structure that
represents software view on the pipe used.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527326/
Link: https://lore.kernel.org/r/20230316161653.4106395-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop dpu_plane_pipe function

There no more need for the dpu_plane_pipe() function, crtc code can
access pstate->pipe_hw.idx directly.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527320/
Link: https://lore.kernel.org/r/20230316161653.4106395-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: move pipe_hw to dpu_plane_state

In preparation to adding fully virtualized planes, move struct
dpu_hw_sspp instance from struct dpu_plane to struct dpu_plane_state, as
it will become a part of state (variable, changes during runtime) rather
than part of a plane (ideally should be statically allocated during boot).

The sspp pointer is set at the dpu_plane_reset(), since this is the
function which allocates the state. Once we have fully virtual
plane<->SSPP relationship, the SSPP will be allocated dynamically in the
dpu_plane_atomic_check() function.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527322/
Link: https://lore.kernel.org/r/20230316161653.4106395-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop EAGAIN check from dpu_format_populate_layout

The pipe's layout is not cached, corresponding data structure is zeroed
out each time in the dpu_plane_sspp_atomic_update(), right before the
call to _dpu_plane_set_scanout() -> dpu_format_populate_layout().

Drop plane_addr comparison against previous layout and corresponding
EAGAIN handling.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527314/
Link: https://lore.kernel.org/r/20230316161653.4106395-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: move SSPP debugfs creation to dpu_kms.c

As SSPP blocks are now visible through dpu_kms->rm.sspp_blocks, move
SSPP debugfs creation from dpu_plane to dpu_kms. We are going to break
the 1:1 correspondence between planes and SSPPs, so it makes no sense
anymore to create SSPP debugfs entries in dpu_plane.c

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527317/
Link: https://lore.kernel.org/r/20230316161653.4106395-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: move SSPP allocation to the RM

Follow the example of all other hw blocks and initialize SSPP blocks in
Resource Manager.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527313/
Link: https://lore.kernel.org/r/20230316161653.4106395-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: rename struct dpu_hw_pipe(_cfg) to dpu_hw_sspp(_cfg)

For all hardware blocks except SSPP the corresponding struct is named
after the block. Rename dpu_hw_pipe (SSPP structure) to dpu_hw_sspp.
Also rename struct dpu_hw_pipe_cfg to dpu_hw_sspp_cfg to follow this
change.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527312/
Link: https://lore.kernel.org/r/20230316161653.4106395-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add support for AR30 format

Commit da7716a249b699978fb5 ("drm/msm/dpu: Add support for XR30 format") enabled
support for the 10-bit XR30 color format but missed enabling support for the
corresponding per-pixel alpha-blending AR30 color format.

Declaring only XR30 but not AR30 color format support can trigger bugs in
userspace. KDE KWin compositor versions prior to 5.27.3 for example prefer
10-bit color formats, rendering a 1cm^2 black box around the cursor due to
missing per-pixel alpha-blending.

Signed-off-by: Leonard Lausen <leonard@lausen.nl>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/527985/
Link: https://lore.kernel.org/r/6f33219dc848ccd7122bce6933338033aa18c33c@lausen.nl
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/disp/dpu1: add support for dspp sub block flush in sc7280

Flush mechanism for DSPP blocks has changed in sc7280 family, it
allows individual sub blocks to be flushed in coordination with
master flush control.

Representation: master_flush && (PCC_flush | IGC_flush .. etc )

This change adds necessary support for the above design.

Changes in v1:
- Few nits (Doug, Dmitry)
- Restrict sub-block flush programming to dpu_hw_ctl file (Dmitry)

Changes in v2:
- Move the address offset to flush macro (Dmitry)
- Separate ops for the sub block flush (Dmitry)

Changes in v3:
- Reuse the DPU_DSPP_xx enum instead of a new one (Dmitry)

Changes in v4:
- Use shorter version for unsigned int (Stephen)

Changes in v5:
- Spurious patch please ignore.

Changes in v6:
- Add SOB tag (Doug, Dmitry)

Changes in v7:
- Cache flush mask per dspp (Dmitry)
- Few nits (Marijn)

Changes in v8:
- Few nits (Marijn)

Changes in v9:
- Use DSPP enum while accessing flush mask to make it readable (Dmitry)
- Few nits (Dmitry)

Changes in v10:
- Fix white spaces in a separate patch (Dmitry)

Changes in v11:
- Define a macro for dspp flush selection (Marijn)
- Few nits (Marijn)

Changes in v12:
- Minor comments (reorder macros and a condition) (Marijn)

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/520701/
Link: https://lore.kernel.org/r/1674814487-2112-1-git-send-email-quic_kalyant@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: document DPU on SM8550

Document the DPU hardware found on the Qualcomm SM8550 platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517511/
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v3-2-660c3bcb127f@linaro.org
[DB: removed interconnect header inclusion]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Remove empty prepare_commit() function

Now that the TE setup has been moved to prepare_for_kickoff(),  we have
not prepare_commit() callbacks left. This makes dpu_encoder_prepare_commit()
do nothing. Remove prepare_commit() from DPU driver.

Changes in V3:
- Reworded commit message to be more clear
- Corrected spelling mistake in commit message

Changes in V4:
- Reworded commit message for clarity

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/523606/
Link: https://lore.kernel.org/r/20230221184256.1436-4-quic_jesszhan@quicinc.com
[DB: fixed merge conflict]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Move TE setup to prepare_for_kickoff()

Currently, DPU will enable TE during prepare_commit(). However, this
will cause a crash and reboot to sahara when trying to read/write to
register in get_autorefresh_config(), because the core clock rates
aren't set at that time.

This used to work because phys_enc->hw_pp is only initialized in mode
set [1], so the first prepare_commit() will return before any register
read/write as hw_pp would be NULL.

However, when we try to implement support for INTF TE, we will run into
the clock issue described above as hw_intf will *not* be NULL on the
first prepare_commit(). This is because the initialization of
dpu_enc->hw_intf has been moved to dpu_encoder_setup() [2].

To avoid this issue, let's enable TE during prepare_for_kickoff()
instead as the core clock rates are guaranteed to be set then.

Depends on: "Implement tearcheck support on INTF block" [3]

Changes in V3:
- Added function prototypes
- Reordered function definitions to make change more legible
- Removed prepare_commit() function from dpu_encoder_phys_cmd

Changes in V4:
- Reworded commit message to be more specific
- Removed dpu_encoder_phys_cmd_is_ongoing_pptx() prototype

[1] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L1109
[2] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L2339
[3] https://patchwork.freedesktop.org/series/112332/

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/523602/
Link: https://lore.kernel.org/r/20230221184256.1436-2-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Check for NULL before calling prepare_commit()

Add a NULL check before calling prepare_commit() in
msm_atomic_commit_tail()

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/523604/
Link: https://lore.kernel.org/r/20230221184256.1436-3-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/adreno: adreno_gpu: Use suspend() instead of idle() on load error

The adreno_load_gpu() path is guarded by an error check on
adreno_load_fw(). This function is responsible for loading
Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it
does not take the vendor-signed ZAP blob into account.

By embedding the SQE (and GMU, if necessary) firmware into the
initrd/kernel, we can trigger and unfortunate path that would not bail
out early and proceed with gpu->hw_init(). That will fail, as the ZAP
loader path will not find the firmware and return back to
adreno_load_gpu().

This error path involves pm_runtime_put_sync() which then calls idle()
instead of suspend(). This is suboptimal, as it means that we're not
going through the clean shutdown sequence. With at least A619_holi, this
makes the GPU not wake up until it goes through at least one more
start-fail-stop cycle. The pm_runtime_put_sync that appears in the error
path actually does not guarantee that because of the earlier enabling of
runtime autosuspend.

Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown.

Test cases:
1. All firmware baked into kernel
2. error loading ZAP fw in initrd -> load from rootfs at DE start

Both succeed on A619_holi (SM6375) and A630 (SDM845).

Fixes: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/530001/
Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: adreno_gpu: Don't set OPP scaling clock w/ GMU

Recently I contributed the switch to OPP API for all Adreno generations.
I did however also skip over the fact that GPUs with a GMU don't specify
a core clock of any kind in the GPU node. While that didn't break
anything, it did introduce unwanted spam in the dmesg:

adreno 5000000.gpu: error -ENOENT: _opp_set_clknames: Couldn't find clock with name: core_clk

Guard the entire logic so that it's not used with GMU-equipped GPUs.

Fixes: 9f251f934012 ("drm/msm/adreno: Use OPP for every GPU generation")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530347/
Link: https://lore.kernel.org/r/20230223-topic-gmuwrapper-v6-1-2034115bb60c@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add support for A650 speed binning

Add support for matching QFPROM fuse values to get the correct speed bin
on A650 (SM8250) GPUs.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530043/
Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-2-2dede22dd7f7@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add support for A640 speed binning

Add support for matching QFPROM fuse values to get the correct speed bin
on A640 (SM8150) GPUs.

Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530042/
Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-1-2dede22dd7f7@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a5xx: add devcoredump support to the fault handler

Use adreno_fault_handler() to implement a5xx_fault_handler(). This
enables devcoredump support on a5xx platforms, allowing one to capture
the crashed GPU state at the time of context fault.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522724/
Link: https://lore.kernel.org/r/20230214123504.3729522-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: split a6xx fault handler into generic and a6xx parts

Split the a6xx_fault_handler() into the generic adreno_fault_handler()
and platform-specific parts. The adreno_fault_handler() can further be
used by a5xx and hopefully by a4xx (at some point).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522722/
Link: https://lore.kernel.org/r/20230214123504.3729522-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: stall translation on fault for all GPU families

The commit e25e92e08e32 ("drm/msm: devcoredump iommu fault support")
enabled SMMU stalling to collect GPU state, but only for a6xx. It tied
enabling the stall with tha per-instance pagetables creation.

Since that commit SoCs with a5xx also gained support for
adreno-smmu-priv. Move stalling into generic code and add corresponding
resume_translation calls.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522720/
Link: https://lore.kernel.org/r/20230214123504.3729522-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/atomic: Switch to vblank_start helper

Drop our custom thing and switch to drm_crtc_next_vblank_start() for
calculating the time of the start of the next vblank period.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/525819/
Link: https://lore.kernel.org/r/20230308155322.344664-15-robdclark@gmail.com

drm/msm: Add wait-boost support

Add a way for various userspace waits to signal urgency.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/525817/
Link: https://lore.kernel.org/r/20230308155322.344664-14-robdclark@gmail.com

drm/msm: Add deadline based boost support

Track the nearest deadline on a fence timeline and set a timer to expire
shortly before to trigger boost if the fence has not yet been signaled.

v2: rebase

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/525816/
Link: https://lore.kernel.org/r/20230308155322.344664-13-robdclark@gmail.com

Merge tag 'dma-fence-deadline' into HEAD

This series adds a deadline hint to fences, so realtime deadlines
such as vblank can be communicated to the fence signaller for power/
frequency management decisions.

This is partially inspired by a trick i915 does, but implemented
via dma-fence for a couple of reasons:

1) To continue to be able to use the atomic helpers
2) To support cases where display and gpu are different drivers

See https://patchwork.freedesktop.org/series/93035/

This does not yet add any UAPI, although this will be needed in
a number of cases:

1) Workloads "ping-ponging" between CPU and GPU, where we don't
   want the GPU freq governor to interpret time stalled waiting
   for GPU as "idle" time
2) Cases where the compositor is waiting for fences to be signaled
   before issuing the atomic ioctl, for example to maintain 60fps
   cursor updates even when the GPU is not able to maintain that
   framerate.

Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/atomic-helper: Set fence deadline for vblank

For an atomic commit updating a single CRTC (ie. a pageflip) calculate
the next vblank time, and inform the fence(s) of that deadline.

v2: Comment typo fix (danvet)
v3: If there are multiple CRTCs, consider the time of the soonest vblank

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/vblank: Add helper to get next vblank time

Will be used in the next commit to set a deadline on fences that an
atomic update is waiting on.

v2: Calculate time at *start* of vblank period, not end
v3: Fix kbuild complaints

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>

drm/scheduler: Add fence deadline support

As the finished fence is the one that is exposed to userspace, and
therefore the one that other operations, like atomic update, would
block on, we need to propagate the deadline from from the finished
fence to the actual hw fence.

v2: Split into drm_sched_fence_set_parent() (ckoenig)
v3: Ensure a thread calling drm_sched_fence_set_deadline_finished() sees
    fence->parent set before drm_sched_fence_set_parent() does this
    test_bit(DMA_FENCE_FLAG_HAS_DEADLINE_BIT).

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>

dma-buf/sync_file: Surface sync-file uABI

We had all of the internal driver APIs, but not the all important
userspace uABI, in the dma-buf doc.  Fix that.  And re-arrange the
comments slightly as otherwise the comments for the ioctl nr defines
would not show up.

v2: Fix docs build warning coming from newly including the uabi header
    in the docs build

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>

dma-buf/dma-resv: Add a way to set fence deadline

Add a way to set a deadline on remaining resv fences according to the
requested usage.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>

dma-buf/fence-chain: Add fence deadline support

Propagate the deadline to all the fences in the chain.

v2: Use dma_fence_chain_contained [Tvrtko]

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>

drm/msm/a6xx: Move ioremap out of hw_init path

Move the one-time RPMh setup to a6xx_gmu_init().  To get rid of the hack
for one-time init vs start, add in an extra a6xx_rpmh_stop() at the end
of the init sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527854/
Link: https://lore.kernel.org/r/20230320144356.803762-15-robdclark@gmail.com

drm/msm/gpu: Move BO allocation out of hw_init

These allocations are only done the first (successful) time through
hw_init() so they won't actually happen in the job_run() path.  But
lockdep doesn't know this.  So dis-entangle them from the hw_init()
path.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527852/
Link: https://lore.kernel.org/r/20230320144356.803762-14-robdclark@gmail.com

drm/msm/gpu: Move fw loading out of hw_init() path

It is already a no-op, since we've already loaded the fw from
adreno_load_gpu(), so drop the redundant call.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527849/
Link: https://lore.kernel.org/r/20230320144356.803762-13-robdclark@gmail.com

drm/msm: Use idr_preload()

Avoid allocation under idr_lock, to prevent deadlock against the
job_free() path (which runs on same thread as job_run(), which makes
it also part of the fence-signaling path.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527847/
Link: https://lore.kernel.org/r/20230320144356.803762-12-robdclark@gmail.com

drm/msm: Switch idr_lock to spinlock

Needed to idr_preload() which returns with preemption disabled.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527846/
Link: https://lore.kernel.org/r/20230320144356.803762-11-robdclark@gmail.com

drm/msm/gem: Avoid obj lock in job_run()

Now that everything that controls which LRU an obj lives in *except* the
backing pages is protected by the LRU lock, add a special path to unpin
in the job_run() path, where we are assured that we already have backing
pages and will not be racing against eviction (because the GEM object's
dma_resv contains the fence that will be signaled when the submit/job
completes).

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527845/
Link: https://lore.kernel.org/r/20230320144356.803762-10-robdclark@gmail.com

drm/msm/gem: Protect pin_count/madv by LRU lock

Since the LRU lock is already acquired when moving an obj between LRUs,
we can use it to protect pin_count and madv, without any significant
change in locking (ie. it just expands the scope of the lock by a hand-
ful of instructions).  This prepares the way to decrement the pin_count
in the job_run() path without needing to hold the obj lock, to avoid a
potential deadlock (or rather stall) caused by the fence-signaling path
(job_run()) blocking on shrinker/reclaim.  (Only a stall because the
wait for fence signaling wait_for_idle() is not infinite.)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527843/
Link: https://lore.kernel.org/r/20230320144356.803762-9-robdclark@gmail.com

drm/msm/gem: Move update_lru()

Just code-motion.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527841/
Link: https://lore.kernel.org/r/20230320144356.803762-8-robdclark@gmail.com

drm/gem: Export drm_gem_lru_move_tail_locked()

Export the locked version or lru's move_tail().

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527835/
Link: https://lore.kernel.org/r/20230320144356.803762-7-robdclark@gmail.com

drm/msm/gem: Simplify vmap vs LRU tracking

vmap'ing is just pinning in disguise.  So treat it as such and simplify
the LRU tracking.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527837/
Link: https://lore.kernel.org/r/20230320144356.803762-6-robdclark@gmail.com

drm/msm: Decouple vma tracking from obj lock

We need to use the inuse count to track that a BO is pinned until
we have the hw_fence.  But we want to remove the obj lock from the
job_run() path as this could deadlock against reclaim/shrinker
(because it is blocking the hw_fence from eventually being signaled).
So split that tracking out into a per-vma lock with narrower scope.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527839/
Link: https://lore.kernel.org/r/20230320144356.803762-5-robdclark@gmail.com

drm/msm/gem: Tidy up VMA API

Stop open coding VMA construction, which will be needed in the next
commit.  And since the VMA already has a ptr to the adress space, stop
passing that around everywhere.  (Also, an aspace always has an mmu so
we can drop a couple pointless NULL checks.)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527833/
Link: https://lore.kernel.org/r/20230320144356.803762-4-robdclark@gmail.com

drm/msm: Move submit bo flags update from obj lock

The flags are only accessed (1) when submit is constructed, before
enqueuing to gpu sched (ie. when still visible to only the task calling
the submit ioctl), (2) here, where we own a reference to the submit and
are serialized on the gpu sched thread, and (3) after the submit is
retired and last reference is dropped, which is serialized on the
submit's reference count.  Hence locking is unneeded here.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527830/
Link: https://lore.kernel.org/r/20230320144356.803762-3-robdclark@gmail.com

drm/msm: Pre-allocate hw_fence

Avoid allocating memory in job_run() by pre-allocating the hw_fence.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527832/
Link: https://lore.kernel.org/r/20230320144356.803762-2-robdclark@gmail.com

drm/msm/a6xx: add CONFIG_PM dependency

Selecting CONFIG_PM_GENERIC_DOMAINS causes a build failure when CONFIG_PM
is not enabled:

WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS
  Depends on [n]: PM [=n]
  Selected by [m]:
  - DRM_MSM [=m] && HAS_IOMEM [=y] && DRM [=m] && (ARCH_QCOM [=y] || SOC_IMX5 || COMPILE_TEST [=y]) && COMMON_CLK [=y] && IOMMU_SUPPORT [=y] && (QCOM_OCMEM [=y] || QCOM_OCMEM [=y]=n) && (QCOM_LLCC [=n] || QCOM_LLCC [=n]=n) && (QCOM_COMMAND_DB [=y] || QCOM_COMMAND_DB [=y]=n) && DEVFREQ_GOV_SIMPLE_ONDEMAND [=y]

drivers/base/power/domain.c:654:13: error: use of undeclared identifier 'pm_wq'
        queue_work(pm_wq, &genpd->power_off_work);
                   ^
drivers/base/power/domain.c:853:26: error: no member named 'ignore_children' in 'struct dev_pm_info'
                if (!dev || dev->power.ignore_children)
                            ~~~~~~~~~~ ^

Fixes: c11fa1204fe9 ("drm/msm/a6xx: Use genpd notifier to ensure cx-gdsc collapse")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/528597/
Link: https://lore.kernel.org/r/20230324095502.3289094-1-arnd@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

dma-buf/fence-array: Add fence deadline support

Propagate the deadline to all the fences in the array.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>

dma-buf/dma-fence: Add deadline awareness

Add a way to hint to the fence signaler of an upcoming deadline, such as
vblank, which the fence waiter would prefer not to miss.  This is to aid
the fence signaler in making power management decisions, like boosting
frequency as the deadline approaches and awareness of missing deadlines
so that can be factored in to the frequency scaling.

v2: Drop dma_fence::deadline and related logic to filter duplicate
    deadlines, to avoid increasing dma_fence size.  The fence-context
    implementation will need similar logic to track deadlines of all
    the fences on the same timeline.  [ckoenig]
v3: Clarify locking wrt. set_deadline callback
v4: Clarify in docs comment that this is a hint
v5: Drop DMA_FENCE_FLAG_HAS_DEADLINE_BIT.
v6: More docs
v7: Fix typo, clarify past deadlines

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>

drm/msm: Update generated headers

It's been a bit overdue.  Regen headers to pull in a2xx perfcntr
updates, etc.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527926/
Link: https://lore.kernel.org/r/20230320185416.938842-2-robdclark@gmail.com

drm/msm/a6xx: Some reg64 conversion

The next generated header update will drop the _LO/_HI suffix, now that
the userspace tooling properly understands 64b vs 32b regs (and the _LO/
_HI workarounds are getting cleaned up).  So convert to using the 64b
reg helpers in prep.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527923/
Link: https://lore.kernel.org/r/20230320185416.938842-1-robdclark@gmail.com

drm: msm: adreno: Disable preemption on Adreno 510

Downstream driver appears to not support preemption on A510 target,
trying to use one make device slow and fill log with rings related errors.
Set num_rings to 1 to disable preemption.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: e20c9284c8f2 ("drm/msm/adreno: Add support for Adreno 510 GPU")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/526898/
Link: https://lore.kernel.org/r/20230314221757.13096-1-a39.skl@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

MAINTAINERS: Update the URI for MSM DRM bugs

Update the URI for MSM DRM bugs for users to be able
to file bugs at a centralized location.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/525026/
Link: https://lore.kernel.org/r/1677972416-7353-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: clean up component ops indentation

Clean up the component ops initialisers which were indented one level
too far.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524973/
Link: https://lore.kernel.org/r/20230303164807.13124-5-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: drop bogus pm_runtime_set_active()

The runtime PM status can only be updated while runtime PM is disabled.

Drop the bogus pm_runtime_set_active() call that was made after enabling
runtime PM and which (incidentally but correctly) left the runtime PM
status set to 'suspended'.

Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524972/
Link: https://lore.kernel.org/r/20230303164807.13124-4-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: fix runtime PM imbalance at gpu load

A recent commit moved enabling of runtime PM to GPU load time (first
open()) but failed to update the error paths so that runtime PM is
disabled if initialisation of the GPU fails. This would trigger a
warning about the unbalanced disable count on the next open() attempt.

Note that pm_runtime_put_noidle() is sufficient to balance the usage
count when pm_runtime_put_sync() fails (and is chosen over
pm_runtime_resume_and_get() for consistency reasons).

Fixes: 4b18299b3365 ("drm/msm/adreno: Defer enabling runpm until hw_init()")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524971/
Link: https://lore.kernel.org/r/20230303164807.13124-3-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Enable optional icc voting from OPP tables

Add the dev_pm_opp_of_find_icc_paths() call to let the OPP framework
handle bus voting as part of power level setting.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523787/
Link: https://lore.kernel.org/r/20230223-topic-opp-v3-7-5f22163cd1df@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a4xx: Implement .gpu_busy

Add support for gpu_busy on a4xx, which is required for devfreq
support.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523791/
Link: https://lore.kernel.org/r/20230223-topic-opp-v3-6-5f22163cd1df@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a3xx: Implement .gpu_busy

Add support for gpu_busy on a3xx, which is required for devfreq
support.

Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #ifc6410
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523789/
Link: https://lore.kernel.org/r/20230223-topic-opp-v3-5-5f22163cd1df@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Use OPP for every GPU generation

Some older GPUs (namely a2xx with no opp tables at all and a320 with
downstream-remnants gpu pwrlevels) used not to have OPP tables. They
both however had just one frequency defined, making it extremely easy
to construct such an OPP table from within the driver if need be.

Do so and switch all clk_set_rate calls on core_clk to their OPP
counterparts.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523784/
Link: https://lore.kernel.org/r/20230223-topic-opp-v3-3-5f22163cd1df@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Use genpd notifier to ensure cx-gdsc collapse

As per the recommended recovery sequence of adreno gpu, cx gdsc should
collapse at hardware before it is turned back ON. This helps to clear
out the stale states in hardware before it is reinitialized. Use the
genpd notifier along with the newly introduced
dev_pm_genpd_synced_poweroff() api to ensure that cx gdsc has collapsed
before we turn it back ON.

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516472/
Link: https://lore.kernel.org/r/20230102161757.v5.5.I9e10545c6a448d5eb1b734839b871d1b3146dac3@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Remove cx gdsc polling using 'reset'

Remove the unused 'reset' interface which was supposed to help to ensure
that cx gdsc has collapsed during gpu recovery. This is was not enabled
so far due to missing gpucc driver support. Similar functionality using
genpd framework will be implemented in the upcoming patch.

This effectively reverts commit 1f6cca404918
("drm/msm/a6xx: Ensure CX collapse during gpu recovery").

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Patchwork: https://patchwork.freedesktop.org/patch/516470/
Link: https://lore.kernel.org/r/20230102161757.v5.4.I96e0bf9eaf96dd866111c1eec8a4c9b70fd7cbcb@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Vote for cx gdsc from gpu driver

When a device has multiple power domains, dev->power_domain is left
empty during probe. That didn't cause any issue so far because we are
freeloading on smmu driver's vote on cx gdsc. Instead of that, create
a device_link between cx genpd device and gmu device to keep a vote from
gpu driver.

Before this patch:
localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
gx_gdsc on 0
    /devices/genpd:1:3d6a000.gmu active 0
cx_gdsc on 0
    /devices/platform/soc@0/3da0000.iommu active 0

After this patch:
localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
gx_gdsc on 0
    /devices/genpd:1:3d6a000.gmu active 0
cx_gdsc on 0
    /devices/platform/soc@0/3da0000.iommu active 0
    /devices/genpd:0:3d6a000.gmu active 0

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516468/
Link: https://lore.kernel.org/r/20230102161757.v5.3.I7f545d8494dcdbe6e96a15fbe8aaf5bb0c003d50@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge tag 'drm-intel-next-2023-03-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Cross-subsystem Changes:
- MEI patches to fix suspend/resume issues with the i915's PXP. (Alexander)

Driver Changes:
- Registers helpers and clean-ups. (Lucas)
- PXP fixes and clean-ups. (Alan, Alexander)
- CDCLK related fixes and w/a (Chaitanya, Stanislav)
- Move display code to use RMW whenever possible (Andrzej)
- PSR fixes (Jouni, Ville)
- Implement async_flip mode per plane tracking (Andrzej)
- Remove pre-production Workarounds (Matt)
- HDMI related fixes (Ankit)
- LVDS cleanup (Ville)
- Watermark fixes and cleanups (Ville, Jani, Stanilav)
- DMC code related fixes, cleanups and improvements (Jani)
- Implement fb_dirty for PSR,FBC,DRRS fixes (Jouni)
- Initial DSB improvements targeting LUTs loading (Ville)
- HWMON related fixes (Ashutosh)
- PCI ID updates (Jonathan, Matt Roper)
- Fix leak in scatterlist (Matt Atwood)
- Fix eDP+DSI dual panel systems (Ville)
- Cast iomem to avoid sparese warnings (Jani)
- Set default backlight controller index (Jani)
- More MTL enabling (RK)
- Conversion of display dev_priv towards i915 (Nirmoy)
- Improvements in log/debug messages (Ville)
- Increase slice_height for DP VDSC (Suraj)
- VBT ports improvements (Ville)
- Fix platforms without Display (Imre)
- Other generic display code clean-ups (Ville, Jani, Rodrigo)
- Add RPL-U sub platform (Chaitanya)
- Add inverted backlight quirk for HP 14-r206nv (Mavroudis)
- Transcoder timing improvements (Ville)
- Track audio state per-transcoder (Ville)
- Error/underrun interrupt fixes (Ville)
- Update combo PHY init sequence (Matt Roper)
- Get HDR DPCD refresh timeout (Ville)
- Vblank improvements (Ville)
- DSS fixes and cleanups (Jani)
- PM code cleanup (Jani)
- Split display parts related to RPS (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZAez4aekcob8fTeh@intel.com

Merge tag 'drm-misc-next-2023-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.4-rc1:

Note: Only changes since pull request from 2023-02-23 are included here.

UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
   parsing.

Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.

Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
  purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
  locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
  for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
   and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
   gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.

Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
   nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ac1f5186-54bb-02f4-ac56-907f5b76f3de@linux.intel.com

drm/msm/dp: set self refresh aware based on PSR support

For the PSR to kick in, self_refresh_aware has to be set.
Initialize it based on the PSR support for the eDP interface.

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524743/
Link: https://lore.kernel.org/r/1677774797-31063-15-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/disp/dpu: update dpu_enc crtc state on crtc enable/disable during self refresh

Populate the enocder software structure to reflect the updated
crtc appropriately during crtc enable/disable for a new commit
while taking care of the self refresh transitions when crtc
disable is triggered from the drm self refresh library.

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/524742/
Link: https://lore.kernel.org/r/1677774797-31063-14-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver

Enable PSR on eDP interface using drm self-refresh librabry.
This patch uses a trigger from self-refresh library to enter/exit
into PSR, when there are no updates from framework.

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524739/
Link: https://lore.kernel.org/r/1677774797-31063-13-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/disp/dpu: use atomic enable/disable callbacks for encoder functions

Use atomic variants for encoder callback functions such that
certain states like self-refresh can be accessed as part of
enable/disable sequence.

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524738/
Link: https://lore.kernel.org/r/1677774797-31063-12-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: use the eDP bridge ops to validate eDP modes

The eDP and DP interfaces shared the bridge operations and
the eDP specific changes were implemented under is_edp check.
To add psr support for eDP, we started using a new set of eDP
bridge ops. We are moving the eDP specific code in the
dp_bridge_mode_valid function to a new eDP function,
edp_bridge_mode_valid under the eDP bridge ops.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524736/
Link: https://lore.kernel.org/r/1677774797-31063-11-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: Add basic PSR support for eDP

Add support for basic panel self refresh (PSR) feature for eDP.
Add a new interface to set PSR state in the sink from DPU.
Program the eDP controller to issue PSR enter and exit SDP to
the sink.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524734/
Link: https://lore.kernel.org/r/1677774797-31063-10-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: use atomic callbacks for DP bridge ops

Use atomic variants for DP bridge callback functions so that
the atomic state can be accessed in the interface drivers.
The atomic state will help the driver find out if the display
is in self refresh state.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/524731/
Link: https://lore.kernel.org/r/1677774797-31063-9-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/disp/dpu: reset the datapath after timing engine disable

Reset the datapath after disabling the timing gen, such that
it can start on a clean slate when the intf is enabled back.
This was a recommended sequence from the DPU HW programming guide.

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524729/
Link: https://lore.kernel.org/r/1677774797-31063-8-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/disp/dpu: wait for extra vsync till timing engine status is disabled

There can be a race between timing gen disable and vblank irq. The
wait post timing gen disable may return early but intf disable sequence
might not be completed. Ensure that, intf status is disabled before
we retire the function.

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524727/
Link: https://lore.kernel.org/r/1677774797-31063-7-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/disp/dpu: get timing engine status from intf status register

Recommended way of reading the interface timing gen status is via
status register. Timing gen status register will give a reliable status
of the interface especially during ON/OFF transitions. This support was
added from DPU version 5.0.0.

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524724/
Link: https://lore.kernel.org/r/1677774797-31063-6-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/disp/dpu: check for crtc enable rather than crtc active to release shared resources

According to KMS documentation, The driver must not release any shared
resources if active is set to false but enable still true.

Fixes: ccc862b957c6 ("drm/msm/dpu: Fix reservation failures in modeset")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524726/
Link: https://lore.kernel.org/r/1677774797-31063-5-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge: add psr support for panel bridge callbacks

This change will handle the psr entry exit cases in the panel
bridge atomic callback functions. For example, the panel power
should not turn off if the panel is entering psr.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/524721/
Link: https://lore.kernel.org/r/1677774797-31063-4-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge: use atomic enable/disable callbacks for panel bridge

Use atomic variants for panel bridge callback functions such that
certain states like self-refresh can be accessed as part of
enable/disable sequence.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/524720/
Link: https://lore.kernel.org/r/1677774797-31063-3-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm: add helper functions to retrieve old and new crtc

Add new helper functions, drm_atomic_get_old_crtc_for_encoder
and drm_atomic_get_new_crtc_for_encoder to retrieve the
corresponding crtc for the encoder.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/524718/
Link: https://lore.kernel.org/r/1677774797-31063-2-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Linux 6.3-rc2

wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext"

This reverts part of commit 015b8cc5e7c4 ("wifi: cfg80211: Fix use after
free for wext")

This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'tpm-v6.3-rc3' of git://git./linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
 "Two additional bug fixes for v6.3"

* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: disable hwrng for fTPM on some AMD designs
  tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

tpm: disable hwrng for fTPM on some AMD designs

AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS.  This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.

This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.

So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions.  As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.

It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.

Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it.  If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.

Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.

Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.

The following hardware was used to test this issue:
    Framework Laptop (Pre-production)
    BIOS: INSYDE Corp, Revision: 3.2
    TPM Device: NTC, Firmware Revision: 7.2

Dump of the faulty ACPI TPM2 table:
    [000h 0000   4]                    Signature : "TPM2"    [Trusted Platform Module hardware interface Table]
    [004h 0004   4]                 Table Length : 0000004C
    [008h 0008   1]                     Revision : 04
    [009h 0009   1]                     Checksum : 2B
    [00Ah 0010   6]                       Oem ID : "INSYDE"
    [010h 0016   8]                 Oem Table ID : "TGL-ULT"
    [018h 0024   4]                 Oem Revision : 00000002
    [01Ch 0028   4]              Asl Compiler ID : "ACPI"
    [020h 0032   4]        Asl Compiler Revision : 00040000

    [024h 0036   2]               Platform Class : 0000
    [026h 0038   2]                     Reserved : 0000
    [028h 0040   8]              Control Address : 0000000000000000
    [030h 0048   4]                 Start Method : 06 [Memory Mapped I/O]

    [034h 0052  12]            Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
    [040h 0064   4]           Minimum Log Length : 00010000
    [044h 0068   8]                  Log Address : 000000004053D000

Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Merge tag 'xfs-6.3-fixes-1' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:

 - Fix a crash if mount time quotacheck fails when there are inodes
   queued for garbage collection.

 - Fix an off by one error when discarding folios after writeback
   failure.

* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix off-by-one-block in xfs_discard_folio()
  xfs: quotacheck failure can race with background inode inactivation

Merge tag 'staging-6.3-rc2' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes and removal from Greg KH:
 "Here are four small staging driver fixes, and one big staging driver
  deletion for 6.3-rc2.

  The fixes are:

   - rtl8192e driver fixes for where the driver was attempting to
     execute various programs directly from the disk for unknown reasons

   - rtl8723bs driver fixes for issues found by Hans in testing

  The deleted driver is the removal of the r8188eu wireless driver as
  now in 6.3-rc1 we have a "real" wifi driver for one that includes
  support for many many more devices than this old driver did. So it's
  time to remove it as it is no longer needed. The maintainers of this
  driver all have acked its removal. Many thanks to them over the years
  for working to clean it up and keep it working while the real driver
  was being developed.

  All of these have been in linux-next this week with no reported
  problems"

* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: delete driver
  staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
  staging: rtl8723bs: Fix key-store index handling
  staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
  staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script