platform/kernel/linux-rpi.git
2 years agomedia: ccs-core.c: fix failure to call clk_disable_unprepare
Hans Verkuil [Mon, 2 May 2022 07:17:46 +0000 (09:17 +0200)]
media: ccs-core.c: fix failure to call clk_disable_unprepare

[ Upstream commit eca89cf60b040ee2cae693ea72a0364284f3084c ]

Fixes smatch warning:

drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: hantro: HEVC: unconditionnaly set pps_{cb/cr}_qp_offset values
Benjamin Gaignard [Tue, 3 May 2022 15:19:20 +0000 (17:19 +0200)]
media: hantro: HEVC: unconditionnaly set pps_{cb/cr}_qp_offset values

[ Upstream commit 46c836569196f377f87a3657b330cffaf94bd727 ]

Always set pps_cb_qp_offset and pps_cr_qp_offset values in Hantro/G2
register whatever is V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT
flag value.
The vendor code does the same to set these values.
This fixes conformance test CAINIT_G_SHARP_3.

Fluster HEVC score is increase by one with this patch.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: coda: limit frame interval enumeration to supported encoder frame sizes
Philipp Zabel [Tue, 26 Apr 2022 09:15:55 +0000 (11:15 +0200)]
media: coda: limit frame interval enumeration to supported encoder frame sizes

[ Upstream commit 67e33dd957880879e785cfea83a3aa24bd5c5577 ]

Let VIDIOC_ENUM_FRAMEINTERVALS return -EINVAL if userspace queries
frame intervals for frame sizes unsupported by the encoder. Fixes the
following v4l2-compliance failure:

fail: v4l2-test-formats.cpp(123): found frame intervals for invalid size 47x16
fail: v4l2-test-formats.cpp(282): node->codec_mask & STATEFUL_ENCODER
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL

[hverkuil: drop incorrect 'For decoder devices, return -ENOTTY.' in the commit log]

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: rga: fix possible memory leak in rga_probe
Hangyu Hua [Thu, 24 Mar 2022 08:37:24 +0000 (09:37 +0100)]
media: rga: fix possible memory leak in rga_probe

[ Upstream commit a71eb6025305192e646040cd76ccacb5bd48a1b5 ]

rga->m2m_dev needs to be freed when rga_probe fails.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomt76: fix encap offload ethernet type check
Felix Fietkau [Wed, 20 Apr 2022 12:29:00 +0000 (14:29 +0200)]
mt76: fix encap offload ethernet type check

[ Upstream commit bc98e7fdd80d215b4b55eea001023231eb8ce12e ]

The driver needs to check if the format is 802.2 vs 802.3 in order to set
a tx descriptor flag. skb->protocol can't be used, since it may not be properly
initialized for packets coming in from a packet socket.
Fix misdetection by checking the ethertype from the skb data instead

Reported-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomt76: mt7921: accept rx frames with non-standard VHT MCS10-11
Felix Fietkau [Fri, 25 Mar 2022 20:15:15 +0000 (21:15 +0100)]
mt76: mt7921: accept rx frames with non-standard VHT MCS10-11

[ Upstream commit 3128ea016965ce9f91ddf4e1dd944724462d1698 ]

The hardware receives them properly, they should not be dropped

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agortlwifi: Use pr_warn instead of WARN_ONCE
Dongliang Mu [Wed, 11 May 2022 01:44:52 +0000 (09:44 +0800)]
rtlwifi: Use pr_warn instead of WARN_ONCE

[ Upstream commit ad732da434a2936128769216eddaece3b1af4588 ]

This memory allocation failure can be triggered by fault injection or
high pressure testing, resulting a WARN.

Fix this by replacing WARN with pr_warn.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220511014453.1621366-1-dzm91@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoipmi: Fix pr_fmt to avoid compilation issues
Corey Minyard [Fri, 15 Apr 2022 12:23:32 +0000 (07:23 -0500)]
ipmi: Fix pr_fmt to avoid compilation issues

[ Upstream commit 2ebaf18a0b7fb764bba6c806af99fe868cee93de ]

The was it was wouldn't work in some situations, simplify it.  What was
there was unnecessary complexity.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoipmi:ssif: Check for NULL msg when handling events and messages
Corey Minyard [Fri, 1 Apr 2022 12:44:53 +0000 (07:44 -0500)]
ipmi:ssif: Check for NULL msg when handling events and messages

[ Upstream commit 7602b957e2404e5f98d9a40b68f1fd27f0028712 ]

Even though it's not possible to get into the SSIF_GETTING_MESSAGES and
SSIF_GETTING_EVENTS states without a valid message in the msg field,
it's probably best to be defensive here and check and print a log, since
that means something else went wrong.

Also add a default clause to that switch statement to release the lock
and print a log, in case the state variable gets messed up somehow.

Reported-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
Mario Limonciello [Tue, 10 May 2022 13:11:36 +0000 (08:11 -0500)]
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default

[ Upstream commit d52848620de00cde4a3a5df908e231b8c8868250 ]

ASUS B1400CEAE fails to resume from suspend to idle by default.  This was
bisected back to commit df4f9bc4fb9c ("nvme-pci: add support for ACPI
StorageD3Enable property") but this is a red herring to the problem.

Before this commit the system wasn't getting into deepest sleep state.
Presumably this commit is allowing entry into deepest sleep state as
advertised by firmware, but there are some other problems related to
the wakeup.

As it is confirmed the system works properly with S3, set the default for
this system to S3.

Reported-by: Jian-Hong Pan <jhp@endlessos.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
Mikulas Patocka [Tue, 10 May 2022 17:17:32 +0000 (13:17 -0400)]
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC

[ Upstream commit 84bc4f1dbbbb5f8aa68706a96711dccb28b518e5 ]

We observed the error "cacheline tracking ENOMEM, dma-debug disabled"
during a light system load (copying some files). The reason for this error
is that the dma_active_cacheline radix tree uses GFP_NOWAIT allocation -
so it can't access the emergency memory reserves and it fails as soon as
anybody reaches the watermark.

This patch changes GFP_NOWAIT to GFP_ATOMIC, so that it can access the
emergency memory reserves.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agospi: stm32-qspi: Fix wait_cmd timeout in APM mode
Patrice Chotard [Wed, 11 May 2022 07:46:42 +0000 (09:46 +0200)]
spi: stm32-qspi: Fix wait_cmd timeout in APM mode

[ Upstream commit d83d89ea68b4726700fa87b22db075e4217e691c ]

In APM mode, TCF and TEF flags are not set. To avoid timeout in
stm32_qspi_wait_cmd(), don't check if TCF/TEF are set.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reported-by: eberhard.stoll@kontron.de
Link: https://lore.kernel.org/r/20220511074644.558874-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agosched/core: Avoid obvious double update_rq_clock warning
Hao Jia [Sat, 30 Apr 2022 08:58:42 +0000 (16:58 +0800)]
sched/core: Avoid obvious double update_rq_clock warning

[ Upstream commit 2679a83731d51a744657f718fc02c3b077e47562 ]

When we use raw_spin_rq_lock() to acquire the rq lock and have to
update the rq clock while holding the lock, the kernel may issue
a WARN_DOUBLE_CLOCK warning.

Since we directly use raw_spin_rq_lock() to acquire rq lock instead of
rq_lock(), there is no corresponding change to rq->clock_update_flags.
In particular, we have obtained the rq lock of other CPUs, the
rq->clock_update_flags of this CPU may be RQCF_UPDATED at this time, and
then calling update_rq_clock() will trigger the WARN_DOUBLE_CLOCK warning.

So we need to clear RQCF_UPDATED of rq->clock_update_flags to avoid
the WARN_DOUBLE_CLOCK warning.

For the sched_rt_period_timer() and migrate_task_rq_dl() cases
we simply replace raw_spin_rq_lock()/raw_spin_rq_unlock() with
rq_lock()/rq_unlock().

For the {pull,push}_{rt,dl}_task() cases, we add the
double_rq_clock_clear_update() function to clear RQCF_UPDATED of
rq->clock_update_flags, and call double_rq_clock_clear_update()
before double_lock_balance()/double_rq_lock() returns to avoid the
WARN_DOUBLE_CLOCK warning.

Some call trace reports:
Call Trace 1:
 <IRQ>
 sched_rt_period_timer+0x10f/0x3a0
 ? enqueue_top_rt_rq+0x110/0x110
 __hrtimer_run_queues+0x1a9/0x490
 hrtimer_interrupt+0x10b/0x240
 __sysvec_apic_timer_interrupt+0x8a/0x250
 sysvec_apic_timer_interrupt+0x9a/0xd0
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x12/0x20

Call Trace 2:
 <TASK>
 activate_task+0x8b/0x110
 push_rt_task.part.108+0x241/0x2c0
 push_rt_tasks+0x15/0x30
 finish_task_switch+0xaa/0x2e0
 ? __switch_to+0x134/0x420
 __schedule+0x343/0x8e0
 ? hrtimer_start_range_ns+0x101/0x340
 schedule+0x4e/0xb0
 do_nanosleep+0x8e/0x160
 hrtimer_nanosleep+0x89/0x120
 ? hrtimer_init_sleeper+0x90/0x90
 __x64_sys_nanosleep+0x96/0xd0
 do_syscall_64+0x34/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Call Trace 3:
 <TASK>
 deactivate_task+0x93/0xe0
 pull_rt_task+0x33e/0x400
 balance_rt+0x7e/0x90
 __schedule+0x62f/0x8e0
 do_task_dead+0x3f/0x50
 do_exit+0x7b8/0xbb0
 do_group_exit+0x2d/0x90
 get_signal+0x9df/0x9e0
 ? preempt_count_add+0x56/0xa0
 ? __remove_hrtimer+0x35/0x70
 arch_do_signal_or_restart+0x36/0x720
 ? nanosleep_copyout+0x39/0x50
 ? do_nanosleep+0x131/0x160
 ? audit_filter_inodes+0xf5/0x120
 exit_to_user_mode_prepare+0x10f/0x1e0
 syscall_exit_to_user_mode+0x17/0x30
 do_syscall_64+0x40/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Call Trace 4:
 update_rq_clock+0x128/0x1a0
 migrate_task_rq_dl+0xec/0x310
 set_task_cpu+0x84/0x1e4
 try_to_wake_up+0x1d8/0x5c0
 wake_up_process+0x1c/0x30
 hrtimer_wakeup+0x24/0x3c
 __hrtimer_run_queues+0x114/0x270
 hrtimer_interrupt+0xe8/0x244
 arch_timer_handler_phys+0x30/0x50
 handle_percpu_devid_irq+0x88/0x140
 generic_handle_domain_irq+0x40/0x60
 gic_handle_irq+0x48/0xe0
 call_on_irq_stack+0x2c/0x60
 do_interrupt_handler+0x80/0x84

Steps to reproduce:
1. Enable CONFIG_SCHED_DEBUG when compiling the kernel
2. echo 1 > /sys/kernel/debug/clear_warn_once
   echo "WARN_DOUBLE_CLOCK" > /sys/kernel/debug/sched/features
   echo "NO_RT_PUSH_IPI" > /sys/kernel/debug/sched/features
3. Run some rt/dl tasks that periodically work and sleep, e.g.
Create 2*n rt or dl (90% running) tasks via rt-app (on a system
with n CPUs), and Dietmar Eggemann reports Call Trace 4 when running
on PREEMPT_RT kernel.

Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20220430085843.62939-2-jiahao.os@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoperf/amd/ibs: Cascade pmu init functions' return value
Ravi Bangoria [Mon, 9 May 2022 04:49:07 +0000 (10:19 +0530)]
perf/amd/ibs: Cascade pmu init functions' return value

[ Upstream commit 39b2ca75eec8a33e2ffdb8aa0c4840ec3e3b472c ]

IBS pmu initialization code ignores return value provided by
callee functions. Fix it.

Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220509044914.1473-2-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agos390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
Heiko Carstens [Fri, 6 May 2022 09:33:19 +0000 (11:33 +0200)]
s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES

[ Upstream commit 63678eecec57fc51b778be3da35a397931287170 ]

gcc 12 does not (always) optimize away code that should only be generated
if parameters are constant and within in a certain range. This depends on
various obscure kernel config options, however in particular
PROFILE_ALL_BRANCHES can trigger this compile error:

In function ‘__atomic_add_const’,
    inlined from ‘__preempt_count_add.part.0’ at ./arch/s390/include/asm/preempt.h:50:3:
./arch/s390/include/asm/atomic_ops.h:80:9: error: impossible constraint in ‘asm’
   80 |         asm volatile(                                                   \
      |         ^~~

Workaround this by simply disabling the optimization for
PROFILE_ALL_BRANCHES, since the kernel will be so slow, that this
optimization won't matter at all.

Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: remove two BUG() from skb_checksum_help()
Eric Dumazet [Tue, 10 May 2022 03:57:40 +0000 (20:57 -0700)]
net: remove two BUG() from skb_checksum_help()

[ Upstream commit d7ea0d9df2a6265b2b180d17ebc64b38105968fc ]

I have a syzbot report that managed to get a crash in skb_checksum_help()

If syzbot can trigger these BUG(), it makes sense to replace
them with more friendly WARN_ON_ONCE() since skb_checksum_help()
can instead return an error code.

Note that syzbot will still crash there, until real bug is fixed.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoscsi: lpfc: Alter FPIN stat accounting logic
James Smart [Fri, 6 May 2022 03:55:17 +0000 (20:55 -0700)]
scsi: lpfc: Alter FPIN stat accounting logic

[ Upstream commit e6f51041450282a8668af3a8fc5c7744e81a447c ]

When configuring CMF management based on signals instead of FPINs, FPIN
alarm and warning statistics are not tracked.

Change the behavior so that FPIN alarms and warnings are always tracked
regardless of the configured mode.

Similar changes are made in the CMF signal stat accounting logic.  Upon
receipt of a signal, only track signaled alarms and warnings. FPIN stats
should not be incremented upon receipt of a signal.

Link: https://lore.kernel.org/r/20220506035519.50908-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoASoC: tscs454: Add endianness flag in snd_soc_component_driver
Charles Keepax [Wed, 4 May 2022 17:08:52 +0000 (18:08 +0100)]
ASoC: tscs454: Add endianness flag in snd_soc_component_driver

[ Upstream commit ff69ec96b87dccb3a29edef8cec5d4fefbbc2055 ]

The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.

A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported. It is worth noting this changes the behaviour of S24_LE to
use a word length of 24 rather than 32. This would appear to be a
correction since the fact S24_LE is stored as 32 bits should not be
presented over the bus.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-26-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoof: Support more than one crash kernel regions for kexec -s
Zhen Lei [Fri, 6 May 2022 11:44:01 +0000 (19:44 +0800)]
of: Support more than one crash kernel regions for kexec -s

[ Upstream commit 8af6b91f58341325bf74ecb0389ddc0039091d84 ]

When "crashkernel=X,high" is used, there may be two crash regions:
high=crashk_res and low=crashk_low_res. But now the syscall
kexec_file_load() only add crashk_res into "linux,usable-memory-range",
this may cause the second kernel to have no available dma memory.

Fix it like kexec-tools does for option -c, add both 'high' and 'low'
regions into the dtb.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-6-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoHID: bigben: fix slab-out-of-bounds Write in bigben_probe
Dongliang Mu [Fri, 6 May 2022 07:24:25 +0000 (15:24 +0800)]
HID: bigben: fix slab-out-of-bounds Write in bigben_probe

[ Upstream commit fc4ef9d5724973193bfa5ebed181dba6de3a56db ]

There is a slab-out-of-bounds Write bug in hid-bigbenff driver.
The problem is the driver assumes the device must have an input but
some malicious devices violate this assumption.

Fix this by checking hid_device's input is non-empty before its usage.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoregulator: mt6315: Enforce regulator-compatible, not name
Nícolas F. R. A. Prado [Fri, 29 Apr 2022 20:13:24 +0000 (16:13 -0400)]
regulator: mt6315: Enforce regulator-compatible, not name

[ Upstream commit 6d435a94ba5bb4f2ad381c0828fbae89c66b50fe ]

The MT6315 PMIC dt-binding should enforce that one of the valid
regulator-compatible is set in each regulator node. However it was
mistakenly matching against regulator-name instead.

Fix the typo. This not only fixes the compatible verification, but also
lifts the regulator-name restriction, so that more meaningful names can
be set for each platform.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220429201325.2205799-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/amdgpu/ucode: Remove firmware load type check in amdgpu_ucode_free_bo
Alice Wong [Mon, 2 May 2022 15:40:18 +0000 (11:40 -0400)]
drm/amdgpu/ucode: Remove firmware load type check in amdgpu_ucode_free_bo

[ Upstream commit ab0cd4a9ae5b4679b714d8dbfedc0901fecdce9f ]

When psp_hw_init failed, it will set the load_type to AMDGPU_FW_LOAD_DIRECT.
During amdgpu_device_ip_fini, amdgpu_ucode_free_bo checks that load_type is
AMDGPU_FW_LOAD_DIRECT and skips deallocating fw_buf causing memory leak.
Remove load_type check in amdgpu_ucode_free_bo.

Signed-off-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init
Alex Deucher [Thu, 21 Apr 2022 05:21:52 +0000 (01:21 -0400)]
drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init

[ Upstream commit b95b5391684b39695887afb4a13cccee7820f5d6 ]

Memory allocations should be done in sw_init.  hw_init should
just be hardware programming needed to initialize the IP block.
This is how most other IP blocks work.  Move the GPU memory
allocations from psp hw_init to psp sw_init and move the memory
free to sw_fini.  This also fixes a potential GPU memory leak
if psp hw_init fails.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomlxsw: Treat LLDP packets as control
Petr Machata [Wed, 4 May 2022 06:29:06 +0000 (09:29 +0300)]
mlxsw: Treat LLDP packets as control

[ Upstream commit 0106668cd2f91bf913fb78972840dedfba80a3c3 ]

When trapping packets for on-CPU processing, Spectrum machines
differentiate between control and non-control traps. Traffic trapped
through non-control traps is treated as data and kept in shared buffer in
pools 0-4. Traffic trapped through control traps is kept in the dedicated
control buffer 9. The advantage of marking traps as control is that
pressure in the data plane does not prevent the control traffic to be
processed.

When the LLDP trap was introduced, it was marked as a control trap. But
then in commit aed4b5721143 ("mlxsw: spectrum: PTP: Hook into packet
receive path"), PTP traps were introduced. Because Ethernet-encapsulated
PTP packets look to the Spectrum-1 ASIC as LLDP traffic and are trapped
under the LLDP trap, this trap was reconfigured as non-control, in sync
with the PTP traps.

There is however no requirement that PTP traffic be handled as data.
Besides, the usual encapsulation for PTP traffic is UDP, not bare Ethernet,
and that is in deployments that even need PTP, which is far less common
than LLDP. This is reflected by the default policer, which was not bumped
up to the 19Kpps / 24Kpps that is the expected load of a PTP-enabled
Spectrum-1 switch.

Marking of LLDP trap as non-control was therefore probably misguided. In
this patch, change it back to control.

Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomlxsw: spectrum_dcb: Do not warn about priority changes
Petr Machata [Wed, 4 May 2022 06:29:05 +0000 (09:29 +0300)]
mlxsw: spectrum_dcb: Do not warn about priority changes

[ Upstream commit b6b584562cbe7dc357083459d6dd5b171e12cadb ]

The idea behind the warnings is that the user would get warned in case when
more than one priority is configured for a given DSCP value on a netdevice.

The warning is currently wrong, because dcb_ieee_getapp_mask() returns
the first matching entry, not all of them, and the warning will then claim
that some priority is "current", when in fact it is not.

But more importantly, the warning is misleading in general. Consider the
following commands:

 # dcb app flush dev swp19 dscp-prio
 # dcb app add dev swp19 dscp-prio 24:3
 # dcb app replace dev swp19 dscp-prio 24:2

The last command will issue the following warning:

 mlxsw_spectrum3 0000:07:00.0 swp19: Ignoring new priority 2 for DSCP 24 in favor of current value of 3

The reason is that the "replace" command works by first adding the new
value, and then removing all old values. This is the only way to make the
replacement without causing the traffic to be prioritized to whatever the
chip defaults to. The warning is issued in response to adding the new
priority, and then no warning is shown when the old priority is removed.
The upshot is that the canonical way to change traffic prioritization
always produces a warning about ignoring the new priority, but what gets
configured is in fact what the user intended.

An option to just emit warning every time that the prioritization changes
just to make it clear that it happened is obviously unsatisfactory.

Therefore, in this patch, remove the warnings.

Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoASoC: dapm: Don't fold register value changes into notifications
Mark Brown [Thu, 28 Apr 2022 16:18:32 +0000 (17:18 +0100)]
ASoC: dapm: Don't fold register value changes into notifications

[ Upstream commit ad685980469b9f9b99d4d6ea05f4cb8f57cb2234 ]

DAPM tracks and reports the value presented to the user from DAPM controls
separately to the register value, these may diverge during initialisation
or when an autodisable control is in use.

When writing DAPM controls we currently report that a change has occurred
if either the DAPM value or the value stored in the register has changed,
meaning that if the two are out of sync we may appear to report a spurious
event to userspace. Since we use this folded in value for nothing other
than the value reported to userspace simply drop the folding in of the
register change.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220428161833.3690050-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet/mlx5: fs, delete the FTE when there are no rules attached to it
Mark Bloch [Tue, 15 Mar 2022 11:23:40 +0000 (11:23 +0000)]
net/mlx5: fs, delete the FTE when there are no rules attached to it

[ Upstream commit 7b0c6338597613f465d131bd939a51844a00455a ]

When an FTE has no children is means all the rules where removed
and the FTE can be deleted regardless of the dests_size value.
While dests_size should be 0 when there are no children
be extra careful not to leak memory or get firmware syndrome
if the proper bookkeeping of dests_size wasn't done.

Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL
jianghaoran [Fri, 29 Apr 2022 05:38:02 +0000 (13:38 +0800)]
ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL

[ Upstream commit b52e1cce31ca721e937d517411179f9196ee6135 ]

ARPHRD_TUNNEL interface can't process rs packets
and will generate TX errors

ex:
ip tunnel add ethn mode ipip local 192.168.1.1 remote 192.168.1.2
ifconfig ethn x.x.x.x

ethn: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1480
inet x.x.x.x  netmask 255.255.255.255  destination x.x.x.x
inet6 fe80::5efe:ac1e:3cdb  prefixlen 64  scopeid 0x20<link>
tunnel   txqueuelen 1000  (IPIP Tunnel)
RX packets 0  bytes 0 (0.0 B)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 0  bytes 0 (0.0 B)
TX errors 3  dropped 0 overruns 0  carrier 0  collisions 0

Signed-off-by: jianghaoran <jianghaoran@kylinos.cn>
Link: https://lore.kernel.org/r/20220429053802.246681-1-jianghaoran@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoscsi: target: tcmu: Fix possible data corruption
Xiaoguang Wang [Thu, 21 Apr 2022 02:37:35 +0000 (10:37 +0800)]
scsi: target: tcmu: Fix possible data corruption

[ Upstream commit bb9b9eb0ae2e9d3f6036f0ad907c3a83dcd43485 ]

When tcmu_vma_fault() gets a page successfully, before the current context
completes page fault procedure, find_free_blocks() may run and call
unmap_mapping_range() to unmap the page. Assume that when
find_free_blocks() initially completes and the previous page fault
procedure starts to run again and completes, then one truncated page has
been mapped to userspace. But note that tcmu_vma_fault() has gotten a
refcount for the page so any other subsystem won't be able to use the page
unless the userspace address is unmapped later.

If another command subsequently runs and needs to extend dbi_thresh it may
reuse the corresponding slot for the previous page in data_bitmap. Then
though we'll allocate new page for this slot in data_area, no page fault
will happen because we have a valid map and the real request's data will be
lost.

Filesystem implementations will also run into this issue but they usually
lock the page when vm_operations_struct->fault gets a page and unlock the
page after finish_fault() completes. For truncate filesystems lock pages in
truncate_inode_pages() to protect against racing wrt. page faults.

To fix this possible data corruption scenario we can apply a method similar
to the filesystems.  For pages that are to be freed, tcmu_blocks_release()
locks and unlocks. Make tcmu_vma_fault() also lock found page under
cmdr_lock. At the same time, since tcmu_vma_fault() gets an extra page
refcount, tcmu_blocks_release() won't free pages if pages are in page fault
procedure, which means it is safe to call tcmu_blocks_release() before
unmap_mapping_range().

With these changes tcmu_blocks_release() will wait for all page faults to
be completed before calling unmap_mapping_range(). And later, if
unmap_mapping_range() is called, it will ensure stale mappings are removed.

Link: https://lore.kernel.org/r/20220421023735.9018-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm: msm: fix error check return value of irq_of_parse_and_map()
Lv Ruyi [Sun, 24 Apr 2022 03:19:59 +0000 (03:19 +0000)]
drm: msm: fix error check return value of irq_of_parse_and_map()

[ Upstream commit b9e4f1d2b505df8e2439b63e67afaa287c1c43e2 ]

The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483175/
Link: https://lore.kernel.org/r/20220424031959.3172406-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall
Alexandru Elisei [Mon, 25 Apr 2022 11:44:41 +0000 (12:44 +0100)]
arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall

[ Upstream commit 3fed9e551417b84038b15117732ea4505eee386b ]

If a compat process tries to execute an unknown system call above the
__ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the
offending process. Information about the error is printed to dmesg in
compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() ->
arm64_show_signal().

arm64_show_signal() interprets a non-zero value for
current->thread.fault_code as an exception syndrome and displays the
message associated with the ESR_ELx.EC field (bits 31:26).
current->thread.fault_code is set in compat_arm_syscall() ->
arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx
value. This means that the ESR_ELx.EC field has the value that the user set
for the syscall number and the kernel can end up printing bogus exception
messages*. For example, for the syscall number 0x68000000, which evaluates
to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error:

[   18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000]
[   18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79
[   18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]

which is misleading, as the bad compat syscall has nothing to do with
pointer authentication.

Stop arm64_show_signal() from printing exception syndrome information by
having compat_arm_syscall() set the ESR_ELx value to 0, as it has no
meaning for an invalid system call number. The example above now becomes:

[   19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000]
[   19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80
[   19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]

which although shows less information because the syscall number,
wrongfully advertised as the ESR value, is missing, it is better than
showing plainly wrong information. The syscall number can be easily
obtained with strace.

*A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative
integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END
evaluates to true; the syscall will exit to userspace in this case with the
ENOSYS error code instead of arm64_notify_die() being called.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-3-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoath10k: skip ath10k_halt during suspend for driver state RESTARTING
Abhishek Kumar [Wed, 27 Apr 2022 07:37:33 +0000 (10:37 +0300)]
ath10k: skip ath10k_halt during suspend for driver state RESTARTING

[ Upstream commit b72a4aff947ba807177bdabb43debaf2c66bee05 ]

Double free crash is observed when FW recovery(caused by wmi
timeout/crash) is followed by immediate suspend event. The FW recovery
is triggered by ath10k_core_restart() which calls driver clean up via
ath10k_halt(). When the suspend event occurs between the FW recovery,
the restart worker thread is put into frozen state until suspend completes.
The suspend event triggers ath10k_stop() which again triggers ath10k_halt()
The double invocation of ath10k_halt() causes ath10k_htt_rx_free() to be
called twice(Note: ath10k_htt_rx_alloc was not called by restart worker
thread because of its frozen state), causing the crash.

To fix this, during the suspend flow, skip call to ath10k_halt() in
ath10k_stop() when the current driver state is ATH10K_STATE_RESTARTING.
Also, for driver state ATH10K_STATE_RESTARTING, call
ath10k_wait_for_suspend() in ath10k_stop(). This is because call to
ath10k_wait_for_suspend() is skipped later in
[ath10k_halt() > ath10k_core_stop()] for the driver state
ATH10K_STATE_RESTARTING.

The frozen restart worker thread will be cancelled during resume when the
device comes out of suspend.

Below is the crash stack for reference:

[  428.469167] ------------[ cut here ]------------
[  428.469180] kernel BUG at mm/slub.c:4150!
[  428.469193] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[  428.469219] Workqueue: events_unbound async_run_entry_fn
[  428.469230] RIP: 0010:kfree+0x319/0x31b
[  428.469241] RSP: 0018:ffffa1fac015fc30 EFLAGS: 00010246
[  428.469247] RAX: ffffedb10419d108 RBX: ffff8c05262b0000
[  428.469252] RDX: ffff8c04a8c07000 RSI: 0000000000000000
[  428.469256] RBP: ffffa1fac015fc78 R08: 0000000000000000
[  428.469276] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  428.469285] Call Trace:
[  428.469295]  ? dma_free_attrs+0x5f/0x7d
[  428.469320]  ath10k_core_stop+0x5b/0x6f
[  428.469336]  ath10k_halt+0x126/0x177
[  428.469352]  ath10k_stop+0x41/0x7e
[  428.469387]  drv_stop+0x88/0x10e
[  428.469410]  __ieee80211_suspend+0x297/0x411
[  428.469441]  rdev_suspend+0x6e/0xd0
[  428.469462]  wiphy_suspend+0xb1/0x105
[  428.469483]  ? name_show+0x2d/0x2d
[  428.469490]  dpm_run_callback+0x8c/0x126
[  428.469511]  ? name_show+0x2d/0x2d
[  428.469517]  __device_suspend+0x2e7/0x41b
[  428.469523]  async_suspend+0x1f/0x93
[  428.469529]  async_run_entry_fn+0x3d/0xd1
[  428.469535]  process_one_work+0x1b1/0x329
[  428.469541]  worker_thread+0x213/0x372
[  428.469547]  kthread+0x150/0x15f
[  428.469552]  ? pr_cont_work+0x58/0x58
[  428.469558]  ? kthread_blkcg+0x31/0x31

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1
Co-developed-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Abhishek Kumar <kuabhs@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220426221859.v2.1.I650b809482e1af8d0156ed88b5dc2677a0711d46@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/amd/pm: fix the compile warning
Evan Quan [Mon, 25 Apr 2022 02:16:46 +0000 (10:16 +0800)]
drm/amd/pm: fix the compile warning

[ Upstream commit 555238d92ac32dbad2d77ad2bafc48d17391990c ]

Fix the compile warning below:
drivers/gpu/drm/amd/amdgpu/../pm/legacy-dpm/kv_dpm.c:1641
kv_get_acp_boot_level() warn: always true condition '(table->entries[i]->clk >= 0) => (0-u32max >= 0)'

Reported-by: kernel test robot <lkp@intel.com>
CC: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/plane: Move range check for format_count earlier
Steven Price [Fri, 3 Dec 2021 10:28:15 +0000 (10:28 +0000)]
drm/plane: Move range check for format_count earlier

[ Upstream commit 4b674dd69701c2e22e8e7770c1706a69f3b17269 ]

While the check for format_count > 64 in __drm_universal_plane_init()
shouldn't be hit (it's a WARN_ON), in its current position it will then
leak the plane->format_types array and fail to call
drm_mode_object_unregister() leaking the modeset identifier. Move it to
the start of the function to avoid allocating those resources in the
first place.

Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211203102815.38624-1-steven.price@arm.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoASoC: Intel: bytcr_rt5640: Add quirk for the HP Pro Tablet 408
Hans de Goede [Wed, 27 Apr 2022 13:49:18 +0000 (15:49 +0200)]
ASoC: Intel: bytcr_rt5640: Add quirk for the HP Pro Tablet 408

[ Upstream commit ce216cfa84a4e1c23b105e652c550bdeaac9e922 ]

Add a quirk for the HP Pro Tablet 408, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

It also uses DMIC1 for the internal mic rather then the default IN3
and it uses JD2 rather then the default JD1 for jack-detect.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211485
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220427134918.527381-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoath11k: disable spectral scan during spectral deinit
Hari Chandrakanthan [Sat, 23 Apr 2022 09:36:47 +0000 (12:36 +0300)]
ath11k: disable spectral scan during spectral deinit

[ Upstream commit 161c64de239c7018e0295e7e0520a19f00aa32dc ]

When ath11k modules are removed using rmmod with spectral scan enabled,
crash is observed. Different crash trace is observed for each crash.

Send spectral scan disable WMI command to firmware before cleaning
the spectral dbring in the spectral_deinit API to avoid this crash.

call trace from one of the crash observed:
[ 1252.880802] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 1252.882722] pgd = 0f42e886
[ 1252.890955] [00000008] *pgd=00000000
[ 1252.893478] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 1253.093035] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.89 #0
[ 1253.115261] Hardware name: Generic DT based system
[ 1253.121149] PC is at ath11k_spectral_process_data+0x434/0x574 [ath11k]
[ 1253.125940] LR is at 0x88e31017
[ 1253.132448] pc : [<7f9387b8>]    lr : [<88e31017>]    psr: a0000193
[ 1253.135488] sp : 80d01bc8  ip : 00000001  fp : 970e0000
[ 1253.141737] r10: 88e31000  r9 : 970ec000  r8 : 00000080
[ 1253.146946] r7 : 94734040  r6 : a0000113  r5 : 00000057  r4 : 00000000
[ 1253.152159] r3 : e18cb694  r2 : 00000217  r1 : 1df1f000  r0 : 00000001
[ 1253.158755] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[ 1253.165266] Control: 10c0383d  Table: 5e71006a  DAC: 00000055
[ 1253.172472] Process swapper/0 (pid: 0, stack limit = 0x60870141)
[ 1253.458055] [<7f9387b8>] (ath11k_spectral_process_data [ath11k]) from [<7f917fdc>] (ath11k_dbring_buffer_release_event+0x214/0x2e4 [ath11k])
[ 1253.466139] [<7f917fdc>] (ath11k_dbring_buffer_release_event [ath11k]) from [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx+0x1840/0x29cc [ath11k])
[ 1253.478807] [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx [ath11k]) from [<7f8fe868>] (ath11k_htc_rx_completion_handler+0x180/0x4e0 [ath11k])
[ 1253.490699] [<7f8fe868>] (ath11k_htc_rx_completion_handler [ath11k]) from [<7f91308c>] (ath11k_ce_per_engine_service+0x2c4/0x3b4 [ath11k])
[ 1253.502386] [<7f91308c>] (ath11k_ce_per_engine_service [ath11k]) from [<7f9a4198>] (ath11k_pci_ce_tasklet+0x28/0x80 [ath11k_pci])
[ 1253.514811] [<7f9a4198>] (ath11k_pci_ce_tasklet [ath11k_pci]) from [<8032227c>] (tasklet_action_common.constprop.2+0x64/0xe8)
[ 1253.526476] [<8032227c>] (tasklet_action_common.constprop.2) from [<803021e8>] (__do_softirq+0x130/0x2d0)
[ 1253.537756] [<803021e8>] (__do_softirq) from [<80322610>] (irq_exit+0xcc/0xe8)
[ 1253.547304] [<80322610>] (irq_exit) from [<8036a4a4>] (__handle_domain_irq+0x60/0xb4)
[ 1253.554428] [<8036a4a4>] (__handle_domain_irq) from [<805eb348>] (gic_handle_irq+0x4c/0x90)
[ 1253.562321] [<805eb348>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c)

Tested-on: QCN6122 hw1.0 AHB WLAN.HK.2.6.0.1-00851-QCAHKSWPL_SILICONZ-1

Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1649396345-349-1-git-send-email-quic_haric@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoscsi: lpfc: Fix resource leak in lpfc_sli4_send_seq_to_ulp()
James Smart [Tue, 26 Apr 2022 18:14:19 +0000 (11:14 -0700)]
scsi: lpfc: Fix resource leak in lpfc_sli4_send_seq_to_ulp()

[ Upstream commit 646db1a560f44236b7278b822ca99a1d3b6ea72c ]

If no handler is found in lpfc_complete_unsol_iocb() to match the rctl of a
received frame, the frame is dropped and resources are leaked.

Fix by returning resources when discarding an unhandled frame type.  Update
lpfc_fc_frame_check() handling of NOP basic link service.

Link: https://lore.kernel.org/r/20220426181419.9154-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoscsi: ufs: Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
Minghao Chi [Wed, 20 Apr 2022 09:03:52 +0000 (09:03 +0000)]
scsi: ufs: Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()

[ Upstream commit 75b8715e20a20bc7b4844835e4035543a2674200 ]

Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync() and
pm_runtime_put_noidle(). This change is just to simplify the code, no
actual functional changes.

Link: https://lore.kernel.org/r/20220420090353.2588804-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/amdgpu/sdma: Fix incorrect calculations of the wptr of the doorbells
Haohui Mai [Mon, 25 Apr 2022 12:41:38 +0000 (20:41 +0800)]
drm/amdgpu/sdma: Fix incorrect calculations of the wptr of the doorbells

[ Upstream commit 7dba6e838e741caadcf27ef717b6dcb561e77f89 ]

This patch fixes the issue where the driver miscomputes the 64-bit
values of the wptr of the SDMA doorbell when initializing the
hardware. SDMA engines v4 and later on have full 64-bit registers for
wptr thus they should be set properly.

Older generation hardwares like CIK / SI have only 16 / 20 / 24bits
for the WPTR, where the calls of lower_32_bits() will be removed in a
following patch.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoscsi: megaraid: Fix error check return value of register_chrdev()
Lv Ruyi [Mon, 18 Apr 2022 10:57:55 +0000 (10:57 +0000)]
scsi: megaraid: Fix error check return value of register_chrdev()

[ Upstream commit c5acd61dbb32b6bda0f3a354108f2b8dcb788985 ]

If major equals 0, register_chrdev() returns an error code when it fails.
This function dynamically allocates a major and returns its number on
success, so we should use "< 0" to check it instead of "!".

Link: https://lore.kernel.org/r/20220418105755.2558828-1-lv.ruyi@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrivers: mmc: sdhci_am654: Add the quirk to set TESTCD bit
Vignesh Raghavendra [Mon, 25 Apr 2022 06:31:20 +0000 (12:01 +0530)]
drivers: mmc: sdhci_am654: Add the quirk to set TESTCD bit

[ Upstream commit c7666240ec76422cb7546bd07cc8ae80dc0ccdd2 ]

The ARASAN MMC controller on Keystone 3 class of devices need the SDCD
line to be connected for proper functioning. Similar to the issue pointed
out in sdhci-of-arasan.c driver, commit 3794c542641f ("mmc:
sdhci-of-arasan: Set controller to test mode when no CD bit").

In cases where this can't be connected, add a quirk to force the
controller into test mode and set the TESTCD bit. Use the flag
"ti,fails-without-test-cd", to implement this above quirk when required.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220425063120.10135-3-a-govindraju@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agommc: jz4740: Apply DMA engine limits to maximum segment size
Aidan MacDonald [Mon, 11 Apr 2022 15:37:53 +0000 (16:37 +0100)]
mmc: jz4740: Apply DMA engine limits to maximum segment size

[ Upstream commit afadb04f1d6e74b18a253403f5274cde5e3fd7bd ]

Do what is done in other DMA-enabled MMC host drivers (cf. host/mmci.c) and
limit the maximum segment size based on the DMA engine's capabilities. This
is needed to avoid warnings like the following with CONFIG_DMA_API_DEBUG=y.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 21 at kernel/dma/debug.c:1162 debug_dma_map_sg+0x2f4/0x39c
DMA-API: jz4780-dma 13420000.dma-controller: mapping sg segment longer than device claims to support [len=98304] [max=65536]
CPU: 0 PID: 21 Comm: kworker/0:1H Not tainted 5.18.0-rc1 #19
Workqueue: kblockd blk_mq_run_work_fn
Stack : 81575aec 00000004 80620000 80620000 80620000 805e7358 00000009 801537ac
        814c832c 806276e3 806e34b4 80620000 81575aec 00000001 81575ab8 09291444
        00000000 00000000 805e7358 81575958 ffffffea 8157596c 00000000 636f6c62
        6220646b 80387a70 0000000f 6d5f6b6c 80620000 00000000 81575ba4 00000009
        805e170c 80896640 00000001 00010000 00000000 00000000 00006098 806e0000
        ...
Call Trace:
[<80107670>] show_stack+0x84/0x120
[<80528cd8>] __warn+0xb8/0xec
[<80528d78>] warn_slowpath_fmt+0x6c/0xb8
[<8016f1d4>] debug_dma_map_sg+0x2f4/0x39c
[<80169d4c>] __dma_map_sg_attrs+0xf0/0x118
[<8016a27c>] dma_map_sg_attrs+0x14/0x28
[<804f66b4>] jz4740_mmc_prepare_dma_data+0x74/0xa4
[<804f6714>] jz4740_mmc_pre_request+0x30/0x54
[<804f4ff4>] mmc_blk_mq_issue_rq+0x6e0/0x7bc
[<804f5590>] mmc_mq_queue_rq+0x220/0x2d4
[<8038b2c0>] blk_mq_dispatch_rq_list+0x480/0x664
[<80391040>] blk_mq_do_dispatch_sched+0x2dc/0x370
[<80391468>] __blk_mq_sched_dispatch_requests+0xec/0x164
[<80391540>] blk_mq_sched_dispatch_requests+0x44/0x94
[<80387900>] __blk_mq_run_hw_queue+0xb0/0xcc
[<80134c14>] process_one_work+0x1b8/0x264
[<80134ff8>] worker_thread+0x2ec/0x3b8
[<8013b13c>] kthread+0x104/0x10c
[<80101dcc>] ret_from_kernel_thread+0x14/0x1c

---[ end trace 0000000000000000 ]---

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220411153753.50443-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomd/bitmap: don't set sb values if can't pass sanity check
Heming Zhao [Fri, 1 Apr 2022 02:13:16 +0000 (10:13 +0800)]
md/bitmap: don't set sb values if can't pass sanity check

[ Upstream commit e68cb83a57a458b01c9739e2ad9cb70b04d1e6d2 ]

If bitmap area contains invalid data, kernel will crash then mdadm
triggers "Segmentation fault".
This is cluster-md speical bug. In non-clustered env, mdadm will
handle broken metadata case. In clustered array, only kernel space
handles bitmap slot info. But even this bug only happened in clustered
env, current sanity check is wrong, the code should be changed.

How to trigger: (faulty injection)

dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sda
dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdb
mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb
mdadm -Ss
echo aaa > magic.txt
 == below modifying slot 2 bitmap data ==
dd if=magic.txt of=/dev/sda seek=16384 bs=1 count=3 <== destroy magic
dd if=/dev/zero of=/dev/sda seek=16436 bs=1 count=4 <== ZERO chunksize
mdadm -A /dev/md0 /dev/sda /dev/sdb
 == kernel crashes. mdadm outputs "Segmentation fault" ==

Reason of kernel crash:

In md_bitmap_read_sb (called by md_bitmap_create), bad bitmap magic didn't
block chunksize assignment, and zero value made DIV_ROUND_UP_SECTOR_T()
trigger "divide error".

Crash log:

kernel: md: md0 stopped.
kernel: md/raid1:md0: not clean -- starting background reconstruction
kernel: md/raid1:md0: active with 2 out of 2 mirrors
kernel: dlm: ... ...
kernel: md-cluster: Joined cluster 44810aba-38bb-e6b8-daca-bc97a0b254aa slot 1
kernel: md0: invalid bitmap file superblock: bad magic
kernel: md_bitmap_copy_from_slot can't get bitmap from slot 2
kernel: md-cluster: Could not gather bitmaps from slot 2
kernel: divide error: 0000 [#1] SMP NOPTI
kernel: CPU: 0 PID: 1603 Comm: mdadm Not tainted 5.14.6-1-default
kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod]
kernel: RSP: 0018:ffffc22ac0843ba0 EFLAGS: 00010246
kernel: ... ...
kernel: Call Trace:
kernel:  ? dlm_lock_sync+0xd0/0xd0 [md_cluster 77fe..7a0]
kernel:  md_bitmap_copy_from_slot+0x2c/0x290 [md_mod 24ea..d3a]
kernel:  load_bitmaps+0xec/0x210 [md_cluster 77fe..7a0]
kernel:  md_bitmap_load+0x81/0x1e0 [md_mod 24ea..d3a]
kernel:  do_md_run+0x30/0x100 [md_mod 24ea..d3a]
kernel:  md_ioctl+0x1290/0x15a0 [md_mod 24ea....d3a]
kernel:  ? mddev_unlock+0xaa/0x130 [md_mod 24ea..d3a]
kernel:  ? blkdev_ioctl+0xb1/0x2b0
kernel:  block_ioctl+0x3b/0x40
kernel:  __x64_sys_ioctl+0x7f/0xb0
kernel:  do_syscall_64+0x59/0x80
kernel:  ? exit_to_user_mode_prepare+0x1ab/0x230
kernel:  ? syscall_exit_to_user_mode+0x18/0x40
kernel:  ? do_syscall_64+0x69/0x80
kernel:  entry_SYSCALL_64_after_hwframe+0x44/0xae
kernel: RIP: 0033:0x7f4a15fa722b
kernel: ... ...
kernel: ---[ end trace 8afa7612f559c868 ]---
kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod]

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: cx25821: Fix the warning when removing the module
Zheyu Ma [Sun, 10 Apr 2022 07:44:09 +0000 (08:44 +0100)]
media: cx25821: Fix the warning when removing the module

[ Upstream commit 2203436a4d24302871617373a7eb21bc17e38762 ]

When removing the module, we will get the following warning:

[   14.746697] remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'cx25821[1]'
[   14.747449] WARNING: CPU: 4 PID: 368 at fs/proc/generic.c:717 remove_proc_entry+0x389/0x3f0
[   14.751611] RIP: 0010:remove_proc_entry+0x389/0x3f0
[   14.759589] Call Trace:
[   14.759792]  <TASK>
[   14.759975]  unregister_irq_proc+0x14c/0x170
[   14.760340]  irq_free_descs+0x94/0xe0
[   14.760640]  mp_unmap_irq+0xb6/0x100
[   14.760937]  acpi_unregister_gsi_ioapic+0x27/0x40
[   14.761334]  acpi_pci_irq_disable+0x1d3/0x320
[   14.761688]  pci_disable_device+0x1ad/0x380
[   14.762027]  ? _raw_spin_unlock_irqrestore+0x2d/0x60
[   14.762442]  ? cx25821_shutdown+0x20/0x9f0 [cx25821]
[   14.762848]  cx25821_finidev+0x48/0xc0 [cx25821]
[   14.763242]  pci_device_remove+0x92/0x240

Fix this by freeing the irq before call pci_disable_device().

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: pci: cx23885: Fix the error handling in cx23885_initdev()
Zheyu Ma [Sun, 10 Apr 2022 07:34:41 +0000 (08:34 +0100)]
media: pci: cx23885: Fix the error handling in cx23885_initdev()

[ Upstream commit e8123311cf06d7dae71e8c5fe78e0510d20cd30b ]

When the driver fails to call the dma_set_mask(), the driver will get
the following splat:

[   55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240
[   55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590
[   55.856822] Call Trace:
[   55.860327]  __process_removed_driver+0x3c/0x240
[   55.861347]  bus_for_each_dev+0x102/0x160
[   55.861681]  i2c_del_driver+0x2f/0x50

This is because the driver has initialized the i2c related resources
in cx23885_dev_setup() but not released them in error handling, fix this
bug by modifying the error path that jumps after failing to call the
dma_set_mask().

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: venus: hfi: avoid null dereference in deinit
Luca Weiss [Fri, 14 Jan 2022 11:02:26 +0000 (11:02 +0000)]
media: venus: hfi: avoid null dereference in deinit

[ Upstream commit 86594f6af867b5165d2ba7b5a71fae3a5961e56c ]

If venus_probe fails at pm_runtime_put_sync the error handling first
calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets
core->ops to NULL, hfi_core_deinit cannot call the core_deinit function
anymore.

Avoid this null pointer derefence by skipping the call when necessary.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoath9k: fix QCA9561 PA bias level
Thibaut VARÈNE [Sun, 17 Apr 2022 14:51:45 +0000 (16:51 +0200)]
ath9k: fix QCA9561 PA bias level

[ Upstream commit e999a5da28a0e0f7de242d841ef7d5e48f4646ae ]

This patch fixes an invalid TX PA DC bias level on QCA9561, which
results in a very low output power and very low throughput as devices
are further away from the AP (compared to other 2.4GHz APs).

This patch was suggested by Felix Fietkau, who noted[1]:
"The value written to that register is wrong, because while the mask
definition AR_CH0_TOP2_XPABIASLVL uses a different value for 9561, the
shift definition AR_CH0_TOP2_XPABIASLVL_S is hardcoded to 12, which is
wrong for 9561."

In real life testing, without this patch the 2.4GHz throughput on
Yuncore XD3200 is around 10Mbps sitting next to the AP, and closer to
practical maximum with the patch applied.

[1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name

Signed-off-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220417145145.1847-1-hacks+kernel@slashdirt.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoASoC: rsnd: care return value from rsnd_node_fixed_index()
Kuninori Morimoto [Thu, 21 Apr 2022 02:55:58 +0000 (02:55 +0000)]
ASoC: rsnd: care return value from rsnd_node_fixed_index()

[ Upstream commit d09a7db431c65aaa8303eb456439d1831ca2e6b4 ]

Renesas Sound is very complex, and thus it needs to use
rsnd_node_fixed_index() to know enabled pin index.

It returns error if strange pin was selected,
but some codes didn't check it.

This patch 1) indicates error message, 2) check return
value.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmlbgn5t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoASoC: rsnd: care default case on rsnd_ssiu_busif_err_status_clear()
Kuninori Morimoto [Thu, 21 Apr 2022 02:55:27 +0000 (02:55 +0000)]
ASoC: rsnd: care default case on rsnd_ssiu_busif_err_status_clear()

[ Upstream commit b1384d4c95088d01f4266237faabf165d3d605fc ]

commit cfb7b8bf1e2d66 ("ASoC: rsnd: tidyup
rsnd_ssiu_busif_err_status_clear()") merged duplicate code, but it didn't
care about default case, and causes smatch warnings.

smatch warnings:
sound/soc/sh/rcar/ssiu.c:112 rsnd_ssiu_busif_err_status_clear() \
error: uninitialized symbol 'offset'.
sound/soc/sh/rcar/ssiu.c:114 rsnd_ssiu_busif_err_status_clear() \
error: uninitialized symbol 'shift'.

This patch cares it.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r15rgn6p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/amd/pm: fix double free in si_parse_power_table()
Keita Suzuki [Tue, 19 Apr 2022 10:37:19 +0000 (10:37 +0000)]
drm/amd/pm: fix double free in si_parse_power_table()

[ Upstream commit f3fa2becf2fc25b6ac7cf8d8b1a2e4a86b3b72bd ]

In function si_parse_power_table(), array adev->pm.dpm.ps and its member
is allocated. If the allocation of each member fails, the array itself
is freed and returned with an error code. However, the array is later
freed again in si_dpm_fini() function which is called when the function
returns an error.

This leads to potential double free of the array adev->pm.dpm.ps, as
well as leak of its array members, since the members are not freed in
the allocation function and the array is not nulled when freed.
In addition adev->pm.dpm.num_ps, which keeps track of the allocated
array member, is not updated until the member allocation is
successfully finished, this could also lead to either use after free,
or uninitialized variable access in si_dpm_fini().

Fix this by postponing the free of the array until si_dpm_fini() and
increment adev->pm.dpm.num_ps everytime the array member is allocated.

Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agocpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode
Ulf Hansson [Fri, 1 Apr 2022 14:11:24 +0000 (16:11 +0200)]
cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode

[ Upstream commit 171b66e2e2e9d80b93c8cff799e6175074b22297 ]

When PSCI OSI mode is supported the syscore flag is set for the CPU devices
that becomes attached to their PM domains (genpds). In the suspend-to-idle
case, we call dev_pm_genpd_suspend|resume() to allow genpd to properly
manage the power-off/on operations (pick an idlestate and manage the on/off
notifications).

For suspend-to-ram, dev_pm_genpd_suspend|resume() is currently not being
called, which causes a problem that the genpd on/off notifiers do not get
sent as expected. This prevents the platform-specific operations from being
executed, typically needed just before/after the boot CPU is being turned
off/on.

To deal with this problem, let's register a syscore ops for cpuidle-psci
when PSCI OSI mode is being used and call dev_pm_genpd_suspend|resume()
from them. In this way, genpd regains control of the PM domain topology and
then sends the on/off notifications when it's appropriate.

Reported-by: Maulik Shah <quic_mkshah@quicinc.com>
Suggested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoscsi: lpfc: Fix call trace observed during I/O with CMF enabled
James Smart [Tue, 12 Apr 2022 22:19:57 +0000 (15:19 -0700)]
scsi: lpfc: Fix call trace observed during I/O with CMF enabled

[ Upstream commit d6d45f67a11136cb88a70a29ab22ea6db8ae6bd5 ]

The following was seen with CMF enabled:

BUG: using smp_processor_id() in preemptible
code: systemd-udevd/31711
kernel: caller is lpfc_update_cmf_cmd+0x214/0x420  [lpfc]
kernel: CPU: 12 PID: 31711 Comm: systemd-udevd
kernel: Call Trace:
kernel: <TASK>
kernel: dump_stack_lvl+0x44/0x57
kernel: check_preemption_disabled+0xbf/0xe0
kernel: lpfc_update_cmf_cmd+0x214/0x420 [lpfc]
kernel: lpfc_nvme_fcp_io_submit+0x23b4/0x4df0 [lpfc]

this_cpu_ptr() calls smp_processor_id() in a preemptible context.

Fix by using per_cpu_ptr() with raw_smp_processor_id() instead.

Link: https://lore.kernel.org/r/20220412222008.126521-16-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoscsi: lpfc: Fix SCSI I/O completion and abort handler deadlock
James Smart [Tue, 12 Apr 2022 22:19:48 +0000 (15:19 -0700)]
scsi: lpfc: Fix SCSI I/O completion and abort handler deadlock

[ Upstream commit 03cbbd7c2f5ee288f648f4aeedc765a181188553 ]

During stress I/O tests with 500+ vports, hard LOCKUP call traces are
observed.

CPU A:
 native_queued_spin_lock_slowpath+0x192
 _raw_spin_lock_irqsave+0x32
 lpfc_handle_fcp_err+0x4c6
 lpfc_fcp_io_cmd_wqe_cmpl+0x964
 lpfc_sli4_fp_handle_cqe+0x266
 __lpfc_sli4_process_cq+0x105
 __lpfc_sli4_hba_process_cq+0x3c
 lpfc_cq_poll_hdler+0x16
 irq_poll_softirq+0x76
 __softirqentry_text_start+0xe4
 irq_exit+0xf7
 do_IRQ+0x7f

CPU B:
 native_queued_spin_lock_slowpath+0x5b
 _raw_spin_lock+0x1c
 lpfc_abort_handler+0x13e
 scmd_eh_abort_handler+0x85
 process_one_work+0x1a7
 worker_thread+0x30
 kthread+0x112
 ret_from_fork+0x1f

Diagram of lockup:

CPUA                            CPUB
----                            ----
lpfc_cmd->buf_lock
                            phba->hbalock
                            lpfc_cmd->buf_lock
phba->hbalock

Fix by reordering the taking of the lpfc_cmd->buf_lock and phba->hbalock in
lpfc_abort_handler routine so that it tries to take the lpfc_cmd->buf_lock
first before phba->hbalock.

Link: https://lore.kernel.org/r/20220412222008.126521-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoscsi: lpfc: Move cfg_log_verbose check before calling lpfc_dmp_dbg()
James Smart [Tue, 12 Apr 2022 22:19:44 +0000 (15:19 -0700)]
scsi: lpfc: Move cfg_log_verbose check before calling lpfc_dmp_dbg()

[ Upstream commit e294647b1aed4247fe52851f3a3b2b19ae906228 ]

In an attempt to log message 0126 with LOG_TRACE_EVENT, the following hard
lockup call trace hangs the system.

Call Trace:
 _raw_spin_lock_irqsave+0x32/0x40
 lpfc_dmp_dbg.part.32+0x28/0x220 [lpfc]
 lpfc_cmpl_els_fdisc+0x145/0x460 [lpfc]
 lpfc_sli_cancel_jobs+0x92/0xd0 [lpfc]
 lpfc_els_flush_cmd+0x43c/0x670 [lpfc]
 lpfc_els_flush_all_cmd+0x37/0x60 [lpfc]
 lpfc_sli4_async_event_proc+0x956/0x1720 [lpfc]
 lpfc_do_work+0x1485/0x1d70 [lpfc]
 kthread+0x112/0x130
 ret_from_fork+0x1f/0x40
Kernel panic - not syncing: Hard LOCKUP

The same CPU tries to claim the phba->port_list_lock twice.

Move the cfg_log_verbose checks as part of the lpfc_printf_vlog() and
lpfc_printf_log() macros before calling lpfc_dmp_dbg().  There is no need
to take the phba->port_list_lock within lpfc_dmp_dbg().

Link: https://lore.kernel.org/r/20220412222008.126521-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agotools/power turbostat: fix ICX DRAM power numbers
Len Brown [Fri, 11 Feb 2022 02:06:56 +0000 (21:06 -0500)]
tools/power turbostat: fix ICX DRAM power numbers

[ Upstream commit 6397b6418935773a34b533b3348b03f4ce3d7050 ]

ICX (and its duplicates) require special hard-coded DRAM RAPL units,
rather than using the generic RAPL energy units.

Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agospi: spi-rspi: Remove setting {src,dst}_{addr,addr_width} based on DMA direction
Biju Das [Mon, 11 Apr 2022 17:31:15 +0000 (18:31 +0100)]
spi: spi-rspi: Remove setting {src,dst}_{addr,addr_width} based on DMA direction

[ Upstream commit 6f381481a5b236cb53d6de2c49c6ef83a4d0f432 ]

The direction field in the DMA config is deprecated. The rspi driver
sets {src,dst}_{addr,addr_width} based on the DMA direction and
it results in dmaengine_slave_config() failure as RZ DMAC driver
validates {src,dst}_addr_width values independent of DMA direction.

This patch fixes the issue by passing both {src,dst}_{addr,addr_width}
values independent of DMA direction.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Suggested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220411173115.6619-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agortw88: 8821c: fix debugfs rssi value
Po-Hao Huang [Thu, 7 Apr 2022 09:58:58 +0000 (17:58 +0800)]
rtw88: 8821c: fix debugfs rssi value

[ Upstream commit ece31c93d4d68f7eb8eea4431b052aacdb678de2 ]

RSSI value per frame is reported to mac80211 but not maintained in
our own statistics, add it back to help us debug.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407095858.46807-7-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoALSA: jack: Access input_dev under mutex
Amadeusz Sławiński [Tue, 12 Apr 2022 09:16:28 +0000 (11:16 +0200)]
ALSA: jack: Access input_dev under mutex

[ Upstream commit 1b6a6fc5280e97559287b61eade2d4b363e836f2 ]

It is possible when using ASoC that input_dev is unregistered while
calling snd_jack_report, which causes NULL pointer dereference.
In order to prevent this serialize access to input_dev using mutex lock.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220412091628.3056922-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agosfc: ef10: Fix assigning negative value to unsigned variable
Haowen Bai [Mon, 11 Apr 2022 01:32:37 +0000 (09:32 +0800)]
sfc: ef10: Fix assigning negative value to unsigned variable

[ Upstream commit b8ff3395fbdf3b79a99d0ef410fc34c51044121e ]

fix warning reported by smatch:
251 drivers/net/ethernet/sfc/ef10.c:2259 efx_ef10_tx_tso_desc()
warn: assigning (-208) to unsigned variable 'ip_tot_len'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/1649640757-30041-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agorcu: Make TASKS_RUDE_RCU select IRQ_WORK
Paul E. McKenney [Thu, 17 Mar 2022 16:30:10 +0000 (09:30 -0700)]
rcu: Make TASKS_RUDE_RCU select IRQ_WORK

[ Upstream commit 46e861be589881e0905b9ade3d8439883858721c ]

The TASKS_RUDE_RCU does not select IRQ_WORK, which can result in build
failures for kernels that do not otherwise select IRQ_WORK.  This commit
therefore causes the TASKS_RUDE_RCU Kconfig option to select IRQ_WORK.

Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agorcu-tasks: Fix race in schedule and flush work
Padmanabha Srinivasaiah [Thu, 17 Feb 2022 15:25:19 +0000 (16:25 +0100)]
rcu-tasks: Fix race in schedule and flush work

[ Upstream commit f75fd4b9221d93177c50dcfde671b2e907f53e86 ]

While booting secondary CPUs, cpus_read_[lock/unlock] is not keeping
online cpumask stable. The transient online mask results in below
calltrace.

[    0.324121] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.346652] Detected PIPT I-cache on CPU2
[    0.347212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.377255] Detected PIPT I-cache on CPU3
[    0.377823] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.379040] ------------[ cut here ]------------
[    0.383662] WARNING: CPU: 0 PID: 10 at kernel/workqueue.c:3084 __flush_work+0x12c/0x138
[    0.384850] Modules linked in:
[    0.385403] CPU: 0 PID: 10 Comm: rcu_tasks_rude_ Not tainted 5.17.0-rc3-v8+ #13
[    0.386473] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[    0.387289] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.388308] pc : __flush_work+0x12c/0x138
[    0.388970] lr : __flush_work+0x80/0x138
[    0.389620] sp : ffffffc00aaf3c60
[    0.390139] x29: ffffffc00aaf3d20 x28: ffffffc009c16af0 x27: ffffff80f761df48
[    0.391316] x26: 0000000000000004 x25: 0000000000000003 x24: 0000000000000100
[    0.392493] x23: ffffffffffffffff x22: ffffffc009c16b10 x21: ffffffc009c16b28
[    0.393668] x20: ffffffc009e53861 x19: ffffff80f77fbf40 x18: 00000000d744fcc9
[    0.394842] x17: 000000000000000b x16: 00000000000001c2 x15: ffffffc009e57550
[    0.396016] x14: 0000000000000000 x13: ffffffffffffffff x12: 0000000100000000
[    0.397190] x11: 0000000000000462 x10: ffffff8040258008 x9 : 0000000100000000
[    0.398364] x8 : 0000000000000000 x7 : ffffffc0093c8bf4 x6 : 0000000000000000
[    0.399538] x5 : 0000000000000000 x4 : ffffffc00a976e40 x3 : ffffffc00810444c
[    0.400711] x2 : 0000000000000004 x1 : 0000000000000000 x0 : 0000000000000000
[    0.401886] Call trace:
[    0.402309]  __flush_work+0x12c/0x138
[    0.402941]  schedule_on_each_cpu+0x228/0x278
[    0.403693]  rcu_tasks_rude_wait_gp+0x130/0x144
[    0.404502]  rcu_tasks_kthread+0x220/0x254
[    0.405264]  kthread+0x174/0x1ac
[    0.405837]  ret_from_fork+0x10/0x20
[    0.406456] irq event stamp: 102
[    0.406966] hardirqs last  enabled at (101): [<ffffffc0093c8468>] _raw_spin_unlock_irq+0x78/0xb4
[    0.408304] hardirqs last disabled at (102): [<ffffffc0093b8270>] el1_dbg+0x24/0x5c
[    0.409410] softirqs last  enabled at (54): [<ffffffc0081b80c8>] local_bh_enable+0xc/0x2c
[    0.410645] softirqs last disabled at (50): [<ffffffc0081b809c>] local_bh_disable+0xc/0x2c
[    0.411890] ---[ end trace 0000000000000000 ]---
[    0.413000] smp: Brought up 1 node, 4 CPUs
[    0.413762] SMP: Total of 4 processors activated.
[    0.414566] CPU features: detected: 32-bit EL0 Support
[    0.415414] CPU features: detected: 32-bit EL1 Support
[    0.416278] CPU features: detected: CRC32 instructions
[    0.447021] Callback from call_rcu_tasks_rude() invoked.
[    0.506693] Callback from call_rcu_tasks() invoked.

This commit therefore fixes this issue by applying a single-CPU
optimization to the RCU Tasks Rude grace-period process.  The key point
here is that the purpose of this RCU flavor is to force a schedule on
each online CPU since some past event.  But the rcu_tasks_rude_wait_gp()
function runs in the context of the RCU Tasks Rude's grace-period kthread,
so there must already have been a context switch on the current CPU since
the call to either synchronize_rcu_tasks_rude() or call_rcu_tasks_rude().
So if there is only a single CPU online, RCU Tasks Rude's grace-period
kthread does not need to anything at all.

It turns out that the rcu_tasks_rude_wait_gp() function's call to
schedule_on_each_cpu() causes problems during early boot.  During that
time, there is only one online CPU, namely the boot CPU.  Therefore,
applying this single-CPU optimization fixes early-boot instances of
this problem.

Link: https://lore.kernel.org/lkml/20220210184319.25009-1-treasure4paddy@gmail.com/T/
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/amd/display: Disabling Z10 on DCN31
Saaem Rizvi [Mon, 28 Mar 2022 18:25:16 +0000 (14:25 -0400)]
drm/amd/display: Disabling Z10 on DCN31

[ Upstream commit 5d5af34072c8b11f60960c3bea57ff9de5877791 ]

[WHY]
Z10 is should not be enabled by default on DCN31.

[HOW]
Using DC debug flags to disable Z10 by default on DCN31.

Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Saaem Rizvi <syerizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/komeda: return early if drm_universal_plane_init() fails.
Liviu Dudau [Thu, 2 Dec 2021 17:00:33 +0000 (17:00 +0000)]
drm/komeda: return early if drm_universal_plane_init() fails.

[ Upstream commit c8f76c37cc3668ee45e081e76a15f24a352ebbdd ]

If drm_universal_plane_init() fails early we jump to the common cleanup code
that calls komeda_plane_destroy() which in turn could access the uninitalised
drm_plane and crash. Return early if an error is detected without going through
the common code.

Reported-by: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211203100946.2706922-1-liviu.dudau@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomac80211: minstrel_ht: fix where rate stats are stored (fixes debugfs output)
Peter Seiderer [Mon, 4 Apr 2022 16:54:14 +0000 (18:54 +0200)]
mac80211: minstrel_ht: fix where rate stats are stored (fixes debugfs output)

[ Upstream commit 5c6dd7bd569b54c0d2904125d7366aa93f077f67 ]

Using an ath9k card the debugfs output of minstrel_ht looks like the following
(note the zero values for the first four rates sum-of success/attempts):

             best    ____________rate__________    ____statistics___    _____last____    ______sum-of________
mode guard #  rate   [name   idx airtime  max_tp]  [avg(tp) avg(prob)]  [retry|suc|att]  [#success | #attempts]
OFDM       1    DP     6.0M  272    1640     5.2       3.1      53.8       3     0 0             0   0
OFDM       1   C       9.0M  273    1104     7.7       4.6      53.8       4     0 0             0   0
OFDM       1  B       12.0M  274     836    10.0       6.0      53.8       4     0 0             0   0
OFDM       1 A    S   18.0M  275     568    14.3       8.5      53.8       5     0 0             0   0
OFDM       1      S   24.0M  276     436    18.1       0.0       0.0       5     0 1            80   1778
OFDM       1          36.0M  277     300    24.9       0.0       0.0       0     0 1             0   107
OFDM       1      S   48.0M  278     236    30.4       0.0       0.0       0     0 0             0   75
OFDM       1          54.0M  279     212    33.0       0.0       0.0       0     0 0             0   72

Total packet count::    ideal 16582      lookaround 885
Average # of aggregated frames per A-MPDU: 1.0

Debugging showed that the rate statistics for the first four rates where
stored in the MINSTREL_CCK_GROUP instead of the MINSTREL_OFDM_GROUP because
in minstrel_ht_get_stats() the supported check was not honoured as done in
various other places, e.g net/mac80211/rc80211_minstrel_ht_debugfs.c:

 74                 if (!(mi->supported[i] & BIT(j)))
 75                         continue;

With the patch applied the output looks good:

              best    ____________rate__________    ____statistics___    _____last____    ______sum-of________
mode guard #  rate   [name   idx airtime  max_tp]  [avg(tp) avg(prob)]  [retry|suc|att]  [#success | #attempts]
OFDM       1    D      6.0M  272    1640     5.2       5.2     100.0       3     0 0             1   1
OFDM       1   C       9.0M  273    1104     7.7       7.7     100.0       4     0 0            38   38
OFDM       1  B       12.0M  274     836    10.0       9.9      89.5       4     2 2           372   395
OFDM       1 A   P    18.0M  275     568    14.3      14.3      97.2       5    52 53         6956   7181
OFDM       1      S   24.0M  276     436    18.1       0.0       0.0       0     0 1             6   163
OFDM       1          36.0M  277     300    24.9       0.0       0.0       0     0 1             0   35
OFDM       1      S   48.0M  278     236    30.4       0.0       0.0       0     0 0             0   38
OFDM       1      S   54.0M  279     212    33.0       0.0       0.0       0     0 0             0   38

Total packet count::    ideal 7097      lookaround 287
Average # of aggregated frames per A-MPDU: 1.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Link: https://lore.kernel.org/r/20220404165414.1036-1-ps.report@gmx.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoACPICA: Avoid cache flush inside virtual machines
Kirill A. Shutemov [Tue, 5 Apr 2022 23:29:38 +0000 (02:29 +0300)]
ACPICA: Avoid cache flush inside virtual machines

[ Upstream commit e2efb6359e620521d1e13f69b2257de8ceaa9475 ]

While running inside virtual machine, the kernel can bypass cache
flushing. Changing sleep state in a virtual machine doesn't affect the
host system sleep state and cannot lead to data loss.

Before entering sleep states, the ACPI code flushes caches to prevent
data loss using the WBINVD instruction.  This mechanism is required on
bare metal.

But, any use WBINVD inside of a guest is worthless.  Changing sleep
state in a virtual machine doesn't affect the host system sleep state
and cannot lead to data loss, so most hypervisors simply ignore it.
Despite this, the ACPI code calls WBINVD unconditionally anyway.
It's useless, but also normally harmless.

In TDX guests, though, WBINVD stops being harmless; it triggers a
virtualization exception (#VE).  If the ACPI cache-flushing WBINVD
were left in place, TDX guests would need handling to recover from
the exception.

Avoid using WBINVD whenever running under a hypervisor.  This both
removes the useless WBINVDs and saves TDX from implementing WBINVD
handling.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-30-kirill.shutemov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agox86/platform/uv: Update TSC sync state for UV5
Mike Travis [Wed, 6 Apr 2022 19:51:48 +0000 (14:51 -0500)]
x86/platform/uv: Update TSC sync state for UV5

[ Upstream commit bb3ab81bdbd53f88f26ffabc9fb15bd8466486ec ]

The UV5 platform synchronizes the TSCs among all chassis, and will not
proceed to OS boot without achieving synchronization.  Previous UV
platforms provided a register indicating successful synchronization.
This is no longer available on UV5.  On this platform TSC_ADJUST
should not be reset by the kernel.

Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220406195149.228164-3-steve.wahl@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agofbcon: Consistently protect deferred_takeover with console_lock()
Daniel Vetter [Tue, 5 Apr 2022 21:03:31 +0000 (23:03 +0200)]
fbcon: Consistently protect deferred_takeover with console_lock()

[ Upstream commit 43553559121ca90965b572cf8a1d6d0fd618b449 ]

This shouldn't be a problem in practice since until we've actually
taken over the console there's nothing we've registered with the
console/vt subsystem, so the exit/unbind path that check this can't
do the wrong thing. But it's confusing, so fix it by moving it a tad
later.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-14-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoipv6: fix locking issues with loops over idev->addr_list
Niels Dossche [Sun, 3 Apr 2022 23:15:24 +0000 (01:15 +0200)]
ipv6: fix locking issues with loops over idev->addr_list

[ Upstream commit 51454ea42c1ab4e0c2828bb0d4d53957976980de ]

idev->addr_list needs to be protected by idev->lock. However, it is not
always possible to do so while iterating and performing actions on
inet6_ifaddr instances. For example, multiple functions (like
addrconf_{join,leave}_anycast) eventually call down to other functions
that acquire the idev->lock. The current code temporarily unlocked the
idev->lock during the loops, which can cause race conditions. Moving the
locks up is also not an appropriate solution as the ordering of lock
acquisition will be inconsistent with for example mc_lock.

This solution adds an additional field to inet6_ifaddr that is used
to temporarily add the instances to a temporary list while holding
idev->lock. The temporary list can then be traversed without holding
idev->lock. This change was done in two places. In addrconf_ifdown, the
list_for_each_entry_safe variant of the list loop is also no longer
necessary as there is no deletion within that specific loop.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220403231523.45843-1-dossche.niels@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoipw2x00: Fix potential NULL dereference in libipw_xmit()
Haowen Bai [Fri, 1 Apr 2022 07:10:54 +0000 (15:10 +0800)]
ipw2x00: Fix potential NULL dereference in libipw_xmit()

[ Upstream commit e8366bbabe1d207cf7c5b11ae50e223ae6fc278b ]

crypt and crypt->ops could be null, so we need to checking null
before dereference

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648797055-25730-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agob43: Fix assigning negative value to unsigned variable
Haowen Bai [Fri, 25 Mar 2022 10:15:15 +0000 (18:15 +0800)]
b43: Fix assigning negative value to unsigned variable

[ Upstream commit 11800d893b38e0e12d636c170c1abc19c43c730c ]

fix warning reported by smatch:
drivers/net/wireless/broadcom/b43/phy_n.c:585 b43_nphy_adjust_lna_gain_table()
warn: assigning (-2) to unsigned variable '*(lna_gain[0])'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648203315-28093-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agob43legacy: Fix assigning negative value to unsigned variable
Haowen Bai [Fri, 25 Mar 2022 10:17:13 +0000 (18:17 +0800)]
b43legacy: Fix assigning negative value to unsigned variable

[ Upstream commit 3f6b867559b3d43a7ce1b4799b755e812fc0d503 ]

fix warning reported by smatch:
drivers/net/wireless/broadcom/b43legacy/phy.c:1181 b43legacy_phy_lo_b_measure()
warn: assigning (-772) to unsigned variable 'fval'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648203433-8736-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue
Niels Dossche [Mon, 21 Mar 2022 22:55:16 +0000 (23:55 +0100)]
mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue

[ Upstream commit 3e12968f6d12a34b540c39cbd696a760cc4616f0 ]

cfg80211_ch_switch_notify uses ASSERT_WDEV_LOCK to assert that
net_device->ieee80211_ptr->mtx (which is the same as priv->wdev.mtx)
is held during the function's execution.
mwifiex_dfs_chan_sw_work_queue is one of its callers, which does not
hold that lock, therefore violating the assertion.
Add a lock around the call.

Disclaimer:
I am currently working on a static analyser to detect missing locks.
This was a reported case. I manually verified the report by looking
at the code, so that I do not send wrong information or patches.
After concluding that this seems to be a true positive, I created
this patch.
However, as I do not in fact have this particular hardware,
I was unable to test it.

Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220321225515.32113-1-dossche.niels@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoselftests/bpf: Fix parsing of prog types in UAPI hdr for bpftool sync
Quentin Monnet [Mon, 4 Apr 2022 14:09:44 +0000 (15:09 +0100)]
selftests/bpf: Fix parsing of prog types in UAPI hdr for bpftool sync

[ Upstream commit 4eeebce6ac4ad80ee8243bb847c98e0e55848d47 ]

The script for checking that various lists of types in bpftool remain in
sync with the UAPI BPF header uses a regex to parse enum bpf_prog_type.
If this enum contains a set of values different from the list of program
types in bpftool, it complains.

This script should have reported the addition, some time ago, of the new
BPF_PROG_TYPE_SYSCALL, which was not reported to bpftool's program types
list. It failed to do so, because it failed to parse that new type from
the enum. This is because the new value, in the BPF header, has an
explicative comment on the same line, and the regex does not support
that.

Let's update the script to support parsing enum values when they have
comments on the same line.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220404140944.64744-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoselftests/bpf: Fix vfs_link kprobe definition
Nikolay Borisov [Thu, 31 Mar 2022 14:09:49 +0000 (17:09 +0300)]
selftests/bpf: Fix vfs_link kprobe definition

[ Upstream commit e299bcd4d16ff86f46c48df1062c8aae0eca1ed8 ]

Since commit 6521f8917082 ("namei: prepare for idmapped mounts")
vfs_link's prototype was changed, the kprobe definition in
profiler selftest in turn wasn't updated. The result is that all
argument after the first are now stored in different registers. This
means that self-test has been broken ever since. Fix it by updating the
kprobe definition accordingly.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220331140949.1410056-1-nborisov@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes
Liu Zixian [Tue, 22 Mar 2022 09:17:30 +0000 (17:17 +0800)]
drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes

[ Upstream commit 194d250cdc4a40ccbd179afd522a9e9846957402 ]

drm_cvt_mode may return NULL and we should check it.

This bug is found by syzkaller:

FAULT_INJECTION stacktrace:
[  168.567394] FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
[  168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567408] Call trace:
[  168.567414]  dump_backtrace+0x0/0x310
[  168.567418]  show_stack+0x28/0x38
[  168.567423]  dump_stack+0xec/0x15c
[  168.567427]  should_fail+0x3ac/0x3d0
[  168.567437]  __should_failslab+0xb8/0x120
[  168.567441]  should_failslab+0x28/0xc0
[  168.567445]  kmem_cache_alloc_trace+0x50/0x640
[  168.567454]  drm_mode_create+0x40/0x90
[  168.567458]  drm_cvt_mode+0x48/0xc78
[  168.567477]  virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu]
[  168.567485]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567492]  drm_mode_getconnector+0x2e0/0xa70
[  168.567496]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567514]  drm_ioctl+0x558/0x6d0
[  168.567522]  do_vfs_ioctl+0x160/0xf30
[  168.567525]  ksys_ioctl+0x98/0xd8
[  168.567530]  __arm64_sys_ioctl+0x50/0xc8
[  168.567536]  el0_svc_common+0xc8/0x320
[  168.567540]  el0_svc_handler+0xf8/0x160
[  168.567544]  el0_svc+0x10/0x218

KASAN stacktrace:
[  168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425
[  168.567566]
[  168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567575] Call trace:
[  168.567578]  dump_backtrace+0x0/0x310
[  168.567582]  show_stack+0x28/0x38
[  168.567586]  dump_stack+0xec/0x15c
[  168.567591]  kasan_report+0x244/0x2f0
[  168.567594]  __asan_load4+0x58/0xb0
[  168.567607]  virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567612]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567617]  drm_mode_getconnector+0x2e0/0xa70
[  168.567621]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567624]  drm_ioctl+0x558/0x6d0
[  168.567628]  do_vfs_ioctl+0x160/0xf30
[  168.567632]  ksys_ioctl+0x98/0xd8
[  168.567636]  __arm64_sys_ioctl+0x50/0xc8
[  168.567641]  el0_svc_common+0xc8/0x320
[  168.567645]  el0_svc_handler+0xf8/0x160
[  168.567649]  el0_svc+0x10/0x218

Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian4@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/vmwgfx: validate the screen formats
Zack Rusin [Fri, 18 Mar 2022 17:43:30 +0000 (13:43 -0400)]
drm/vmwgfx: validate the screen formats

[ Upstream commit 8bb75aeb58bd688d70827ae179bd3da57b6d975b ]

The kms code wasn't validating the modifiers and was letting through
unsupported formats. rgb8 was never properly supported and has no
matching svga screen target format so remove it.
This fixes format/modifier failures in kms_addfb_basic from IGT.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-4-zack@kde.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoiommu/vt-d: Add RPLS to quirk list to skip TE disabling
Tejas Upadhyay [Wed, 2 Mar 2022 04:32:56 +0000 (10:02 +0530)]
iommu/vt-d: Add RPLS to quirk list to skip TE disabling

[ Upstream commit 0a967f5bfd9134b89681cae58deb222e20840e76 ]

The VT-d spec requires (10.4.4 Global Command Register, TE
field) that:

Hardware implementations supporting DMA draining must drain
any in-flight DMA read/write requests queued within the
Root-Complex before completing the translation enable
command and reflecting the status of the command through
the TES field in the Global Status register.

Unfortunately, some integrated graphic devices fail to do
so after some kind of power state transition. As the
result, the system might stuck in iommu_disable_translati
on(), waiting for the completion of TE transition.

This adds RPLS to a quirk list for those devices and skips
TE disabling if the qurik hits.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/4898
Tested-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302043256.191529-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agobtrfs: fix the error handling for submit_extent_page() for btrfs_do_readpage()
Qu Wenruo [Tue, 12 Apr 2022 12:30:14 +0000 (20:30 +0800)]
btrfs: fix the error handling for submit_extent_page() for btrfs_do_readpage()

commit 10f7f6f879c28f8368d6516ab1ccf3517a1f5d3d upstream.

[BUG]
Test case generic/475 have a very high chance (almost 100%) to hit a fs
hang, where a data page will never be unlocked and hang all later
operations.

[CAUSE]
In btrfs_do_readpage(), if we hit an error from submit_extent_page() we
will try to do the cleanup for our current io range, and exit.

This works fine for PAGE_SIZE == sectorsize cases, but not for subpage.

For subpage btrfs_do_readpage() will lock the full page first, which can
contain several different sectors and extents:

 btrfs_do_readpage()
 |- begin_page_read()
 |  |- btrfs_subpage_start_reader();
 |     Now the page will have PAGE_SIZE / sectorsize reader pending,
 |     and the page is locked.
 |
 |- end_page_read() for different branches
 |  This function will reduce subpage readers, and when readers
 |  reach 0, it will unlock the page.

But when submit_extent_page() failed, we only cleanup the current
io range, while the remaining io range will never be cleaned up, and the
page remains locked forever.

[FIX]
Update the error handling of submit_extent_page() to cleanup all the
remaining subpage range before exiting the loop.

Please note that, now submit_extent_page() can only fail due to
sanity check in alloc_new_bio().

Thus regular IO errors are impossible to trigger the error path.

CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agobtrfs: repair super block num_devices automatically
Qu Wenruo [Mon, 28 Feb 2022 07:05:53 +0000 (15:05 +0800)]
btrfs: repair super block num_devices automatically

commit d201238ccd2f30b9bfcfadaeae0972e3a486a176 upstream.

[BUG]
There is a report that a btrfs has a bad super block num devices.

This makes btrfs to reject the fs completely.

  BTRFS error (device sdd3): super_num_devices 3 mismatch with num_devices 2 found here
  BTRFS error (device sdd3): failed to read chunk tree: -22
  BTRFS error (device sdd3): open_ctree failed

[CAUSE]
During btrfs device removal, chunk tree and super block num devs are
updated in two different transactions:

  btrfs_rm_device()
  |- btrfs_rm_dev_item(device)
  |  |- trans = btrfs_start_transaction()
  |  |  Now we got transaction X
  |  |
  |  |- btrfs_del_item()
  |  |  Now device item is removed from chunk tree
  |  |
  |  |- btrfs_commit_transaction()
  |     Transaction X got committed, super num devs untouched,
  |     but device item removed from chunk tree.
  |     (AKA, super num devs is already incorrect)
  |
  |- cur_devices->num_devices--;
  |- cur_devices->total_devices--;
  |- btrfs_set_super_num_devices()
     All those operations are not in transaction X, thus it will
     only be written back to disk in next transaction.

So after the transaction X in btrfs_rm_dev_item() committed, but before
transaction X+1 (which can be minutes away), a power loss happen, then
we got the super num mismatch.

This has been fixed by commit bbac58698a55 ("btrfs: remove device item
and update super block in the same transaction").

[FIX]
Make the super_num_devices check less strict, converting it from a hard
error to a warning, and reset the value to a correct one for the current
or next transaction commit.

As the number of device items is the critical information where the
super block num_devices is only a cached value (and also useful for
cross checking), it's safe to automatically update it. Other device
related problems like missing device are handled after that and may
require other means to resolve, like degraded mount. With this fix,
potentially affected filesystems won't fail mount and require the manual
repair by btrfs check.

Reported-by: Luca Béla Palkovics <luca.bela.palkovics@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+8xDSpvdm_U0QLBAnrH=zqDq_cWCOH5TiV46CKmp3igr44okQ@mail.gmail.com/
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agobtrfs: return correct error number for __extent_writepage_io()
Qu Wenruo [Tue, 12 Apr 2022 12:30:15 +0000 (20:30 +0800)]
btrfs: return correct error number for __extent_writepage_io()

commit 44e5801fada6925d2bba1987c7b59cbcc9d0d592 upstream.

[BUG]
If we hit an error from submit_extent_page() inside
__extent_writepage_io(), we could still return 0 to the caller, and
even trigger the warning in btrfs_page_assert_not_dirty().

[CAUSE]
In __extent_writepage_io(), if we hit an error from
submit_extent_page(), we will just clean up the range and continue.

This is completely fine for regular PAGE_SIZE == sectorsize, as we can
only hit one sector in one page, thus after the error we're ensured to
exit and @ret will be saved.

But for subpage case, we may have other dirty subpage range in the page,
and in the next loop, we may succeeded submitting the next range.

In that case, @ret will be overwritten, and we return 0 to the caller,
while we have hit some error.

[FIX]
Introduce @has_error and @saved_ret to record the first error we hit, so
we will never forget what error we hit.

CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agobtrfs: add "0x" prefix for unsupported optional features
Qu Wenruo [Tue, 10 May 2022 07:10:18 +0000 (15:10 +0800)]
btrfs: add "0x" prefix for unsupported optional features

commit d5321a0fa8bc49f11bea0b470800962c17d92d8f upstream.

The following error message lack the "0x" obviously:

  cannot mount because of unsupported optional features (4000)

Add the prefix to make it less confusing. This can happen on older
kernels that try to mount a filesystem with newer features so it makes
sense to backport to older trees.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoptrace: Reimplement PTRACE_KILL by always sending SIGKILL
Eric W. Biederman [Fri, 29 Apr 2022 14:23:55 +0000 (09:23 -0500)]
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL

commit 6a2d90ba027adba528509ffa27097cffd3879257 upstream.

The current implementation of PTRACE_KILL is buggy and has been for
many years as it assumes it's target has stopped in ptrace_stop.  At a
quick skim it looks like this assumption has existed since ptrace
support was added in linux v1.0.

While PTRACE_KILL has been deprecated we can not remove it as
a quick search with google code search reveals many existing
programs calling it.

When the ptracee is not stopped at ptrace_stop some fields would be
set that are ignored except in ptrace_stop.  Making the userspace
visible behavior of PTRACE_KILL a noop in those case.

As the usual rules are not obeyed it is not clear what the
consequences are of calling PTRACE_KILL on a running process.
Presumably userspace does not do this as it achieves nothing.

Replace the implementation of PTRACE_KILL with a simple
send_sig_info(SIGKILL) followed by a return 0.  This changes the
observable user space behavior only in that PTRACE_KILL on a process
not stopped in ptrace_stop will also kill it.  As that has always
been the intent of the code this seems like a reasonable change.

Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-7-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
Eric W. Biederman [Tue, 26 Apr 2022 21:45:37 +0000 (16:45 -0500)]
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP

commit 4a3d2717d140401df7501a95e454180831a0c5af upstream.

xtensa is the last user of the PT_SINGLESTEP flag.  Changing tsk->ptrace in
user_enable_single_step and user_disable_single_step without locking could
potentiallly cause problems.

So use a thread info flag instead of a flag in tsk->ptrace.  Use TIF_SINGLESTEP
that xtensa already had defined but unused.

Remove the definitions of PT_SINGLESTEP and PT_BLOCKSTEP as they have no more users.

Cc: stable@vger.kernel.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
Eric W. Biederman [Tue, 26 Apr 2022 21:30:17 +0000 (16:30 -0500)]
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP

commit c200e4bb44e80b343c09841e7caaaca0aac5e5fa upstream.

User mode linux is the last user of the PT_DTRACE flag.  Using the flag to indicate
single stepping is a little confusing and worse changing tsk->ptrace without locking
could potentionally cause problems.

So use a thread info flag with a better name instead of flag in tsk->ptrace.

Remove the definition PT_DTRACE as uml is the last user.

Cc: stable@vger.kernel.org
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agox86/sgx: Set active memcg prior to shmem allocation
Kristen Carlson Accardi [Fri, 20 May 2022 17:42:47 +0000 (10:42 -0700)]
x86/sgx: Set active memcg prior to shmem allocation

commit 0c9782e204d3cc5625b9e8bf4e8625d38dfe0139 upstream.

When the system runs out of enclave memory, SGX can reclaim EPC pages
by swapping to normal RAM. These backing pages are allocated via a
per-enclave shared memory area. Since SGX allows unlimited over
commit on EPC memory, the reclaimer thread can allocate a large
number of backing RAM pages in response to EPC memory pressure.

When the shared memory backing RAM allocation occurs during
the reclaimer thread context, the shared memory is charged to
the root memory control group, and the shmem usage of the enclave
is not properly accounted for, making cgroups ineffective at
limiting the amount of RAM an enclave can consume.

For example, when using a cgroup to launch a set of test
enclaves, the kernel does not properly account for 50% - 75% of
shmem page allocations on average. In the worst case, when
nearly all allocations occur during the reclaimer thread, the
kernel accounts less than a percent of the amount of shmem used
by the enclave's cgroup to the correct cgroup.

SGX stores a list of mm_structs that are associated with
an enclave. Pick one of them during reclaim and charge that
mm's memcg with the shmem allocation. The one that gets picked
is arbitrary, but this list almost always only has one mm. The
cases where there is more than one mm with different memcg's
are not worth considering.

Create a new function - sgx_encl_alloc_backing(). This function
is used whenever a new backing storage page needs to be
allocated. Previously the same function was used for page
allocation as well as retrieving a previously allocated page.
Prior to backing page allocation, if there is a mm_struct associated
with the enclave that is requesting the allocation, it is set
as the active memory control group.

[ dhansen: - fix merge conflict with ELDU fixes
           - check against actual ksgxd_tsk, not ->mm ]

Cc: stable@vger.kernel.org
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lkml.kernel.org/r/20220520174248.4918-1-kristen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agox86/kexec: fix memory leak of elf header buffer
Baoquan He [Wed, 23 Feb 2022 11:32:24 +0000 (19:32 +0800)]
x86/kexec: fix memory leak of elf header buffer

commit b3e34a47f98974d0844444c5121aaff123004e57 upstream.

This is reported by kmemleak detector:

unreferenced object 0xffffc900002a9000 (size 4096):
  comm "kexec", pid 14950, jiffies 4295110793 (age 373.951s)
  hex dump (first 32 bytes):
    7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00  .ELF............
    04 00 3e 00 01 00 00 00 00 00 00 00 00 00 00 00  ..>.............
  backtrace:
    [<0000000016a8ef9f>] __vmalloc_node_range+0x101/0x170
    [<000000002b66b6c0>] __vmalloc_node+0xb4/0x160
    [<00000000ad40107d>] crash_prepare_elf64_headers+0x8e/0xcd0
    [<0000000019afff23>] crash_load_segments+0x260/0x470
    [<0000000019ebe95c>] bzImage64_load+0x814/0xad0
    [<0000000093e16b05>] arch_kexec_kernel_image_load+0x1be/0x2a0
    [<000000009ef2fc88>] kimage_file_alloc_init+0x2ec/0x5a0
    [<0000000038f5a97a>] __do_sys_kexec_file_load+0x28d/0x530
    [<0000000087c19992>] do_syscall_64+0x3b/0x90
    [<0000000066e063a4>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In crash_prepare_elf64_headers(), a buffer is allocated via vmalloc() to
store elf headers.  While it's not freed back to system correctly when
kdump kernel is reloaded or unloaded.  Then memory leak is caused.  Fix it
by introducing x86 specific function arch_kimage_file_post_load_cleanup(),
and freeing the buffer there.

And also remove the incorrect elf header buffer freeing code.  Before
calling arch specific kexec_file loading function, the image instance has
been initialized.  So 'image->elf_headers' must be NULL.  It doesn't make
sense to free the elf header buffer in the place.

Three different people have reported three bugs about the memory leak on
x86_64 inside Redhat.

Link: https://lkml.kernel.org/r/20220223113225.63106-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoperf/x86/intel: Fix event constraints for ICL
Kan Liang [Wed, 25 May 2022 13:39:52 +0000 (06:39 -0700)]
perf/x86/intel: Fix event constraints for ICL

commit 86dca369075b3e310c3c0adb0f81e513c562b5e4 upstream.

According to the latest event list, the event encoding 0x55
INST_DECODED.DECODERS and 0x56 UOPS_DECODED.DEC0 are only available on
the first 4 counters. Add them into the event constraints table.

Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220525133952.1660658-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agox86/MCE/AMD: Fix memory leak when threshold_create_bank() fails
Ammar Faizi [Tue, 29 Mar 2022 10:47:05 +0000 (17:47 +0700)]
x86/MCE/AMD: Fix memory leak when threshold_create_bank() fails

commit e5f28623ceb103e13fc3d7bd45edf9818b227fd0 upstream.

In mce_threshold_create_device(), if threshold_create_bank() fails, the
previously allocated threshold banks array @bp will be leaked because
the call to mce_threshold_remove_device() will not free it.

This happens because mce_threshold_remove_device() fetches the pointer
through the threshold_banks per-CPU variable but bp is written there
only after the bank creation is successful, and not before, when
threshold_create_bank() fails.

Add a helper which unwinds all the bank creation work previously done
and pass into it the previously allocated threshold banks array for
freeing.

  [ bp: Massage. ]

Fixes: 6458de97fc15 ("x86/mce/amd: Straighten CPU hotplug path")
Co-developed-by: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Signed-off-by: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220329104705.65256-3-ammarfaizi2@gnuweeb.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoplatform/x86: intel-hid: fix _DSM function index handling
Michael Niewöhner [Tue, 17 May 2022 18:31:30 +0000 (20:31 +0200)]
platform/x86: intel-hid: fix _DSM function index handling

commit 1620c80bba53af8c547bab34a1d3bc58319fe608 upstream.

intel_hid_dsm_fn_mask is a bit mask containing one bit for each function
index. Fix the function index check in intel_hid_evaluate_method
accordingly, which was missed in commit 97ab4516205e ("platform/x86:
intel-hid: fix _DSM function index handling").

Fixes: 97ab4516205e ("platform/x86: intel-hid: fix _DSM function index handling")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Niewöhner <linux@mniewoehner.de>
Link: https://lore.kernel.org/r/66f813f5bcc724a0f6dd5adefe6a9728dbe509e3.camel@mniewoehner.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoxhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
Mathias Nyman [Wed, 11 May 2022 22:04:50 +0000 (01:04 +0300)]
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI

commit 74f55a62c4c354f43a6d75f77dd184c4f57b9a26 upstream.

Alder Lake N TCSS xHCI needs to be runtime suspended whenever possible
to allow the TCSS hardware block to enter D3 and thus save energy

Cc: stable@kernel.org
Suggested-by: Gopal Vamshi Krishna <vamshi.krishna.gopal@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220511220450.85367-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agocifs: when extending a file with falloc we should make files not-sparse
Ronnie Sahlberg [Tue, 31 May 2022 22:48:38 +0000 (08:48 +1000)]
cifs: when extending a file with falloc we should make files not-sparse

commit f66f8b94e7f2f4ac9fffe710be231ca8f25c5057 upstream.

as this is the only way to make sure the region is allocated.
Fix the conditional that was wrong and only tried to make already
non-sparse files non-sparse.

Cc: stable@vger.kernel.org
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agocifs: fix potential double free during failed mount
Ronnie Sahlberg [Tue, 31 May 2022 03:01:17 +0000 (13:01 +1000)]
cifs: fix potential double free during failed mount

commit 8378a51e3f8140f60901fb27208cc7a6e47047b5 upstream.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=2088799

Cc: stable@vger.kernel.org
Signed-off-by: Roberto Bergantinos <rbergant@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agofs/ntfs3: Restore ntfs_xattr_get_acl and ntfs_xattr_set_acl functions
Konstantin Komarov [Fri, 22 Oct 2021 15:15:36 +0000 (18:15 +0300)]
fs/ntfs3: Restore ntfs_xattr_get_acl and ntfs_xattr_set_acl functions

commit 87e21c99bad763524c953ff4d1a61ee19038ddc2 upstream.

Apparently we need to maintain these functions with
ntfs_get_acl_ex and ntfs_set_acl_ex.
This commit fixes xfstest generic/099
Fixes: 95dd8b2c1ed0 ("fs/ntfs3: Remove unnecessary functions")

Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agofs/ntfs3: Update i_ctime when xattr is added
Konstantin Komarov [Fri, 22 Oct 2021 15:35:43 +0000 (18:35 +0300)]
fs/ntfs3: Update i_ctime when xattr is added

commit 2d44667c306e7806848a3478820f87343feb5421 upstream.

Ctime wasn't updated after setfacl command.
This commit fixes xfstest generic/307
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agofs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()'
Christophe JAILLET [Thu, 11 Nov 2021 07:45:44 +0000 (08:45 +0100)]
fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()'

commit e589f9b7078e1c0191613cd736f598e81d2390de upstream.

All error handling paths lead to 'out' where many resources are freed.

Do it as well here instead of a direct return, otherwise 'log', 'ra' and
'log->one_page_buf' (at least) will leak.

Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agofs/ntfs3: In function ntfs_set_acl_ex do not change inode->i_mode if called from...
Konstantin Komarov [Wed, 24 Nov 2021 12:08:19 +0000 (15:08 +0300)]
fs/ntfs3: In function ntfs_set_acl_ex do not change inode->i_mode if called from function ntfs_init_acl

commit 9186d472ee780fabf74424756c4c00545166157e upstream.

ntfs_init_acl sets mode. ntfs_init_acl calls ntfs_set_acl_ex.
ntfs_set_acl_ex must not change this mode.
Fixes xfstest generic/444
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")

Reviewed-by: Joe Perches <joe@perches.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agofs/ntfs3: Check new size for limits
Konstantin Komarov [Mon, 25 Oct 2021 15:34:06 +0000 (18:34 +0300)]
fs/ntfs3: Check new size for limits

commit 114346978cf61de02832cc3cc68432a3de70fb38 upstream.

We must check size before trying to allocate.
Size can be set for example by "ulimit -f".
Fixes xfstest generic/228
Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")

Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agofs/ntfs3: Keep preallocated only if option prealloc enabled
Konstantin Komarov [Fri, 22 Oct 2021 14:37:52 +0000 (17:37 +0300)]
fs/ntfs3: Keep preallocated only if option prealloc enabled

commit e95113ed4d428219e3395044e29f5713fc446720 upstream.

If size of file was reduced, we still kept allocated blocks.
This commit makes ntfs3 work as other fs like btrfs.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214719
Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")

Reported-by: Ganapathi Kamath <hgkamath@hotmail.com>
Tested-by: Ganapathi Kamath <hgkamath@hotmail.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agofs/ntfs3: Fix fiemap + fix shrink file size (to remove preallocated space)
Konstantin Komarov [Mon, 25 Oct 2021 15:31:28 +0000 (18:31 +0300)]
fs/ntfs3: Fix fiemap + fix shrink file size (to remove preallocated space)

commit 3880f2b816a7e4ca889b7e8a42e6c62c5706ed36 upstream.

Two problems:
1. ntfs3_setattr can't truncate preallocated space;
2. if allocated fragment "cross" valid size, then fragment splits into two parts:
- normal part;
- unwritten part (here we must return FIEMAP_EXTENT_LAST).
Before this commit we returned FIEMAP_EXTENT_LAST for whole fragment.
Fixes xfstest generic/092
Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agofs/ntfs3: Update valid size if -EIOCBQUEUED
Konstantin Komarov [Mon, 25 Oct 2021 15:48:38 +0000 (18:48 +0300)]
fs/ntfs3: Update valid size if -EIOCBQUEUED

commit 52e00ea6b26e45fb8159e3b57cdde8d3f9bdd8e9 upstream.

Update valid size if write is still in I/O queue.
Fixes xfstest generic/240
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>