scsi: hisi_sas: Code style cleanup

Remove extra blank lines and add spaces around operators.

Link: https://lore.kernel.org/r/1598958790-232272-9-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Add missing newlines

Newline is missing from some printk() statements. Add them.

Link: https://lore.kernel.org/r/1598958790-232272-8-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Add BIST support for fixed code pattern

Through the new debugfs interface the user can select fixed code
patterns. Add two new interfaces fixed_code and fixed_code1.

Link: https://lore.kernel.org/r/1598958790-232272-7-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Add BIST support for phy FFE

Add BIST support for phy FFE (Feed forward equalizer) setting. The user can
configure FFE through the new debugfs interface.

FFE is a parameter used for link layer control. It will affect the link
quality between the SAS controller and the backplane. In the BIST test, the
FFE interface is provided to assist board testers in optimizing link
parameters.

The modification of the FFE parameter will affect the test after BIST or
the normal running of the board. The user should save the initial FFE
values and restore them after BIST test is complete.

Link: https://lore.kernel.org/r/1598958790-232272-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Make phy index variable name consistent

We use "phy_id" to identify phy in the BIST code but the rest of code
always uses "phy_no". Change it for consistency.

Link: https://lore.kernel.org/r/1598958790-232272-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Do not modify upper fields of PROG_PHY_LINK_RATE reg

When updating PROG_PHY_LINK_RATE to set linkrate for a phy we used a
hard-coded initial value instead of getting the current value from the
register. The assumption was that this register would not be modified, but
in fact it was partially modified in a new version of hardware. The
hard-coded value we used changed the default value of the register to a an
incorrect setting and as a result the SAS controller could not change
linkrate for the phy.

Delete hard-coded value and always read the latest value of register before
updating it.

Link: https://lore.kernel.org/r/1598958790-232272-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Modify macro name for OOB phy linkrate

The macro for OOB phy linkrate is named CFG_PROG_PHY_LINK_RATE_* but that
is inaccurate. For clarification, include OOB in macro name.

Link: https://lore.kernel.org/r/1598958790-232272-3-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Avoid accessing to SSP task for SMP I/Os

hisi_sas_slot_task_free() attempts to dereference SSP task for non-ATA
tasks. If the task is SMP, the code may reference the wrong structure
although this may not cause any problems.

To avoid this, only access to SSP task when slot->n_elem_dif is not 0 which
indicates this is an SSP task.

Link: https://lore.kernel.org/r/1598958790-232272-2-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fc: Add 256GBit speed setting to SCSI FC transport

Add 256GBit speed setting to the SCSI FC transport.  This speed can be
reached via FC trunking techniques.

Link: https://lore.kernel.org/r/20200831213518.48409-1-james.smart@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Remove set but not used 'eth_hdrs_stripped'

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_rq_cmpl_frame_recv’:
drivers/scsi/fnic/fnic_fcs.c:840:15: warning: variable
‘eth_hdrs_stripped’ set but not used [-Wunused-but-set-variable]
  840 |  unsigned int eth_hdrs_stripped;
      |               ^~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-5-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Remove set but not used 'fr_len'

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_fcoe_send_vlan_req’:
drivers/scsi/fnic/fnic_fcs.c:379:6: warning: variable ‘fr_len’ set but
not used [-Wunused-but-set-variable]
  379 |  int fr_len;
      |      ^~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-4-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Remove set but not used variable in is_fnic_fip_flogi_reject()

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘is_fnic_fip_flogi_reject’:
drivers/scsi/fnic/fnic_fcs.c:317:9: warning: variable ‘els_len’ set but
not used [-Wunused-but-set-variable]
  317 |  size_t els_len = 0;
      |         ^~~~~~~
drivers/scsi/fnic/fnic_fcs.c:312:21: warning: variable ‘els_dtype’ set
but not used [-Wunused-but-set-variable]
  312 |  enum fip_desc_type els_dtype = 0;
      |                     ^~~~~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-3-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Remove set but not used 'old_vlan'

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_main.c: In function ‘fnic_set_vlan’:
drivers/scsi/fnic/fnic_main.c:555:6: warning: variable ‘old_vlan’ set
but not used [-Wunused-but-set-variable]
  555 |  u16 old_vlan;
      |      ^~~~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-2-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fdomain_isa: Merge branches in fdomain_isa_match()

The *else* branch of the *if* (base) statement in fdomain_isa_match() is
immediately followed by the *if* (!base) statement. Simplify the code by
removing the unneeded *if*.

Link: https://lore.kernel.org/r/df68e341-5113-4cf2-b64c-dc1ad0b686ac@omprussia.ru
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix the return value

A negative error code should be returned.

Link: https://lore.kernel.org/r/20200829075746.19166-1-tian.xianting@h3c.com
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arm: Avoid comma separated statements

Use semicolons and braces.

Link: https://lore.kernel.org/r/be30bb0f24a5fb4f70ca8ed7027ca7555816a3fb.1598331149.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Handle LINERESET indication in err handler

PA Layer issues a LINERESET to the PHY at the recovery step in the Power
Mode change operation. If it happens during auto or manual hibern8 enter,
even if hibern8 enter succeeds, UFS power mode shall be set to PWM-G1 mode
and kept in that mode after exit from hibern8, leading to bad performance.
Handle the LINERESET in the eh_work by restoring power mode to HS mode
after all pending reqs and tasks are cleared from doorbell.

Link: https://lore.kernel.org/r/1598321228-21093-3-git-send-email-cang@codeaurora.org
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Abort tasks before clearing them from doorbell

To recover non-fatal errors, no full reset is required, err_handler only
clears those pending TRs/TMRs so that SCSI layer can re-issue them. In
current err_handler, TRs are directly cleared from UFS host's doorbell but
not aborted from device side. However, according to the UFSHCI JEDEC spec,
the host software shall use UTP Transfer Request List Clear Register to
clear a task from UFS host's doorbell only when a UTP Transfer Request is
expected to not be completed, e.g. when the host software receives a
“FUNCTION COMPLETE” Task Management response which means a Transfer Request
was aborted. To follow the UFSHCI JEDEC spec, in err_handler, abort one TR
before clearing it from doorbell.

Link: https://lore.kernel.org/r/1598321228-21093-2-git-send-email-cang@codeaurora.org
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update copyright

Update driver copyright.

Link: https://lore.kernel.org/r/159864896224.13630.9798419111015060967.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update documentation

Change Microsemi references to Microchip.

Link: https://lore.kernel.org/r/159864895592.13630.18113151805817361168.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: MAINTAINERS: Update smartpqi and hpsa

Change M entry e-mail to microchip.

Change L entry e-mail for storagedev to microchip.

Link: https://lore.kernel.org/r/159864510818.12656.822985017436862534.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: Update copyright

Add entry for Microchip.

Link: https://lore.kernel.org/r/159864166227.12131.3427629298809272795.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mptscsih: Remove set but not used 'timeleft'

This addresses the following gcc warning with "make W=1":

drivers/message/fusion/mptscsih.c: In function ‘mptscsih_IssueTaskMgmt’:
drivers/message/fusion/mptscsih.c:1519:17: warning: variable ‘timeleft’
set but not used [-Wunused-but-set-variable]
 1519 |  unsigned long  timeleft;
      |                 ^~~~~~~~

Link: https://lore.kernel.org/r/20200827125925.428357-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: isci: Remove set but not used 'index'

This addresses the following gcc warning with "make W=1":

drivers/scsi/isci/host.c: In function ‘sci_controller_complete_io’:
drivers/scsi/isci/host.c:2674:6: warning: variable ‘index’ set but not
used [-Wunused-but-set-variable]
 2674 |  u16 index;
      |      ^~~~~

Link: https://lore.kernel.org/r/20200827125851.428071-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: dpt_i2o: Remove set but not used 'pHba'

This addresses the following gcc warning with "make W=1":

drivers/scsi/dpt_i2o.c: In function ‘adpt_slave_configure’:
drivers/scsi/dpt_i2o.c:411:12: warning: variable ‘pHba’ set but not used
[-Wunused-but-set-variable]
  411 |  adpt_hba* pHba;
      |            ^~~~

Link: https://lore.kernel.org/r/20200827125812.427753-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Remove redundant NULL check

kfree_skb() handles a NULL skb argument so the additional check is
unnecessary. Remove it.

Link: https://lore.kernel.org/r/20200827092606.32148-1-vulab@iscas.ac.cn
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Make ufshcd_print_trs() consider UFSHCD_QUIRK_PRDT_BYTE_GRAN

Fix ufshcd_print_trs() to consider UFSHCD_QUIRK_PRDT_BYTE_GRAN when using
utp_transfer_req_desc::prd_table_length, so that it doesn't treat the
number of bytes as the number of entries.

Originally from Kiwoong Kim
(https://lkml.kernel.org/r/20200218233115.8185-1-kwmad.kim@samsung.com).

Link: https://lore.kernel.org/r/20200826021040.152148-1-ebiggers@kernel.org
Fixes: 26f968d7de82 ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk")
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Remove erroneous fallthrough annotation

This fallthrough annotation is unreachable so we can delete it.

Link: https://lore.kernel.org/r/20200825112003.GD285523@mwanda
Fixes: c4e2fbca374b ("scsi: aacraid: Reworked scsi command submission path")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_debug: Implement lun_format

Implement 'flat space LUN addressing', which allows us to raise the max_lun
limitation to 16384. The maximum number of LUNs prior to this patch was
256.

Link: https://lore.kernel.org/r/20200821042249.5097-1-dgilbert@interlog.com
Suggested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: exynos: Enable UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL

For Exynos, flush during hibern8 is sufficient. Manual flush will cause an
increase in power usage.

Link: https://lore.kernel.org/r/ef94af8f273316d50d7f50a0cac9c7be9b9316a1.1598319701.git.kwmad.kim@samsung.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Introduce skipping manual flush for Write Booster

We have two knobs to control flush for write booster,
fWriteBoosterBufferFlushDuringHibernate and fWriteBoosterBufferFlushEn.

Some vendors use only fWriteBoosterBufferFlushDuringHibernate because this
can reportedly cover most scenarios. Also, there have been some reports
that flush by fWriteBoosterBufferFlushEn could lead to increased power
consumption thanks to unexpected internal operations. Consequently, we need
a way to enable or disable fWriteBoosterEn operations. Add quirk to bypass
manual flush.

Link: https://lore.kernel.org/r/ffdb0eda30515809f0ad9ee936b26917ee9b4593.1598319701.git.kwmad.kim@samsung.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: esas2r: Remove unnecessary casts

In a number of places in esas2r_ioctl.c, the void* returned from
pci_alloc_consistent() is cast unnecessarily. Remove casts.

Issue identified with Coccinelle.

Link: https://lore.kernel.org/r/20200820181411.866057-1-alex.dewar90@gmail.com
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()

On an error exit path, a negative error code should be returned instead of
a positive return value.

Link: https://lore.kernel.org/r/20200802111531.5065-1-tianjia.zhang@linux.alibaba.com
Fixes: f40e74ffa3de ("csiostor:firmware upgrade fix")
Cc: Praveen Madhavan <praveenm@chelsio.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix wrong return value in qla_nvme_register_hba()

On an error exit path, a negative error code should be returned instead of
a positive return value.

Link: https://lore.kernel.org/r/20200802111530.5020-1-tianjia.zhang@linux.alibaba.com
Fixes: 8777e4314d39 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine")
Cc: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix wrong return value in qlt_chk_unresolv_exchg()

In the case of a failed retry, a positive value EIO is returned here.  I
think this is a typo error. It is necessary to return an error value.

[mkp: caller checks != 0 but the rest of the file uses -Exxx so fix this up
to be consistent]

Link: https://lore.kernel.org/r/20200802111528.4974-1-tianjia.zhang@linux.alibaba.com
Fixes: 0691094ff3f2 ("scsi: qla2xxx: Add logic to detect ABTS hang and response completion")
Cc: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove redundant variable initialization

The initialization value of `rc` is wrong. It is unnecessary to initialize
`rc` variables, so remove its initialization operation.

Link: https://lore.kernel.org/r/20200802111527.4928-1-tianjia.zhang@linux.alibaba.com
Fixes: 84905dfe78d2 ("scsi: qla2xxx: Fix TMF and Multi-Queue config")
Cc: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aic7xxx: Fix error code handling

ahc_linux_queue_recovery_cmd returns SUCCESS(0x2002) or FAIL(0x2003), but
the caller is checking error case using != 0.

Link: https://lore.kernel.org/r/20200816070242.978839-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix spelling mistake "Cant" -> "Can't"

There is a spelling mistake in an error message. Fix it.

Link: https://lore.kernel.org/r/20200810101238.61787-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Fix spelling mistake "couldnt" -> "couldn't"

There are spelling mistakes in two comments and a csio_err error
message. Fix these.

Link: https://lore.kernel.org/r/20200810090843.49553-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2fc: Fix spelling mistake "couldnt" -> "couldn't"

There are spelling mistakes in various printk messages. Fix these.

Link: https://lore.kernel.org/r/20200810085057.49039-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: snic: Fix spelling mistakes of "Queueing"

There are two different spelling mistakes of "Queueing" in error and debug
messages. Fix these.

Link: https://lore.kernel.org/r/20200810080745.47314-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix the size used in a 'dma_free_coherent()' call

Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.

[mkp: removed memset() hunk that has already been addressed]

Link: https://lore.kernel.org/r/20200802110721.677707-1-christophe.jaillet@wanadoo.fr
Fixes: 4161cee52df8 ("[SCSI] qla4xxx: Add host statistics support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Fix an error handling path in 'qla4xxx_get_host_stats()'

Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.

Link: https://lore.kernel.org/r/20200802101527.676054-1-christophe.jaillet@wanadoo.fr
Fixes: 4161cee52df8 ("[SCSI] qla4xxx: Add host statistics support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Remove pci-dma-compat wrapper API

The legacy API wrappers in include/linux/pci-dma-compat.h should go away as
they create unnecessary midlayering for include/linux/dma-mapping.h API.
Instead use dma-mapping.h API directly.

The patch has been generated with the coccinelle script below.  And has
been hand modified to replace each GFP_ with a correct flag depending upon
the context.  Compile tested.

@@@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL

@@@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE

@@@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE

@@@@
- PCI_DMA_NONE
+ DMA_NONE

@@ expression E1, E2, E3; @@
- pci_alloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3; @@
- pci_zalloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3, E4; @@
- pci_free_consistent(E1, E2, E3, E4)
+ dma_free_coherent(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_single(E1, E2, E3, E4)
+ dma_map_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_single(E1, E2, E3, E4)
+ dma_unmap_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4, E5; @@
- pci_map_page(E1, E2, E3, E4, E5)
+ dma_map_page(&E1->dev, E2, E3, E4, E5)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_page(E1, E2, E3, E4)
+ dma_unmap_page(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_sg(E1, E2, E3, E4)
+ dma_map_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_sg(E1, E2, E3, E4)
+ dma_unmap_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_cpu(E1, E2, E3, E4)
+ dma_sync_single_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_device(E1, E2, E3, E4)
+ dma_sync_single_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_cpu(E1, E2, E3, E4)
+ dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_device(E1, E2, E3, E4)
+ dma_sync_sg_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2; @@
- pci_dma_mapping_error(E1, E2)
+ dma_mapping_error(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_consistent_dma_mask(E1, E2)
+ dma_set_coherent_mask(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_dma_mask(E1, E2)
+ dma_set_mask(&E1->dev, E2)

Link: https://lore.kernel.org/r/635cfc08b83a041708ee6afbc430087416f2605c.1596045683.git.usuraj35@gmail.com
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove pci-dma-compat wrapper API

The legacy API wrappers in include/linux/pci-dma-compat.h should go away as
they create unnecessary midlayering for include/linux/dma-mapping.h API.
Instead use dma-mapping.h API directly.

The patch has been generated with the coccinelle script below.  Compile
tested.

@@@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL

@@@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE

@@@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE

@@@@
- PCI_DMA_NONE
+ DMA_NONE

@@ expression E1, E2, E3; @@
- pci_alloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3; @@
- pci_zalloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3, E4; @@
- pci_free_consistent(E1, E2, E3, E4)
+ dma_free_coherent(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_single(E1, E2, E3, E4)
+ dma_map_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_single(E1, E2, E3, E4)
+ dma_unmap_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4, E5; @@
- pci_map_page(E1, E2, E3, E4, E5)
+ dma_map_page(&E1->dev, E2, E3, E4, E5)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_page(E1, E2, E3, E4)
+ dma_unmap_page(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_sg(E1, E2, E3, E4)
+ dma_map_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_sg(E1, E2, E3, E4)
+ dma_unmap_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_cpu(E1, E2, E3, E4)
+ dma_sync_single_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_device(E1, E2, E3, E4)
+ dma_sync_single_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_cpu(E1, E2, E3, E4)
+ dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_device(E1, E2, E3, E4)
+ dma_sync_sg_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2; @@
- pci_dma_mapping_error(E1, E2)
+ dma_mapping_error(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_consistent_dma_mask(E1, E2)
+ dma_set_coherent_mask(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_dma_mask(E1, E2)
+ dma_set_mask(&E1->dev, E2)

Link: https://lore.kernel.org/r/24627a86cf1e67fd229bc323316523d1ba0811f9.1596045683.git.usuraj35@gmail.com
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: Remove pci-dma-compat wrapper API

The legacy API wrappers in include/linux/pci-dma-compat.h should go away as
they create unnecessary midlayering for include/linux/dma-mapping.h API.
Instead use dma-mapping.h API directly.

The patch has been generated with the coccinelle script below.  Compile
tested.

@@@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL

@@@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE

@@@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE

@@@@
- PCI_DMA_NONE
+ DMA_NONE

@@ expression E1, E2, E3; @@
- pci_alloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3; @@
- pci_zalloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3, E4; @@
- pci_free_consistent(E1, E2, E3, E4)
+ dma_free_coherent(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_single(E1, E2, E3, E4)
+ dma_map_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_single(E1, E2, E3, E4)
+ dma_unmap_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4, E5; @@
- pci_map_page(E1, E2, E3, E4, E5)
+ dma_map_page(&E1->dev, E2, E3, E4, E5)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_page(E1, E2, E3, E4)
+ dma_unmap_page(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_sg(E1, E2, E3, E4)
+ dma_map_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_sg(E1, E2, E3, E4)
+ dma_unmap_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_cpu(E1, E2, E3, E4)
+ dma_sync_single_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_device(E1, E2, E3, E4)
+ dma_sync_single_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_cpu(E1, E2, E3, E4)
+ dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_device(E1, E2, E3, E4)
+ dma_sync_sg_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2; @@
- pci_dma_mapping_error(E1, E2)
+ dma_mapping_error(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_consistent_dma_mask(E1, E2)
+ dma_set_coherent_mask(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_dma_mask(E1, E2)
+ dma_set_mask(&E1->dev, E2)

Link: https://lore.kernel.org/r/37154a4efe82a58b9bad143608dd9fd37a2c94e5.1596045683.git.usuraj35@gmail.com
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Remove pci-dma-compat wrapper API

The legacy API wrappers in include/linux/pci-dma-compat.h should go away as
they create unnecessary midlayering for include/linux/dma-mapping.h API.
Instead use dma-mapping.h API directly.

The patch has been generated with the coccinelle script below.  Compile
tested.

@@@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL

@@@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE

@@@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE

@@@@
- PCI_DMA_NONE
+ DMA_NONE

@@ expression E1, E2, E3; @@
- pci_alloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3; @@
- pci_zalloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3, E4; @@
- pci_free_consistent(E1, E2, E3, E4)
+ dma_free_coherent(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_single(E1, E2, E3, E4)
+ dma_map_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_single(E1, E2, E3, E4)
+ dma_unmap_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4, E5; @@
- pci_map_page(E1, E2, E3, E4, E5)
+ dma_map_page(&E1->dev, E2, E3, E4, E5)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_page(E1, E2, E3, E4)
+ dma_unmap_page(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_sg(E1, E2, E3, E4)
+ dma_map_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_sg(E1, E2, E3, E4)
+ dma_unmap_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_cpu(E1, E2, E3, E4)
+ dma_sync_single_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_device(E1, E2, E3, E4)
+ dma_sync_single_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_cpu(E1, E2, E3, E4)
+ dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_device(E1, E2, E3, E4)
+ dma_sync_sg_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2; @@
- pci_dma_mapping_error(E1, E2)
+ dma_mapping_error(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_consistent_dma_mask(E1, E2)
+ dma_set_coherent_mask(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_dma_mask(E1, E2)
+ dma_set_mask(&E1->dev, E2)

Link: https://lore.kernel.org/r/e825ac7108092cc8fa8d462dc702098ef10fc6a2.1596045683.git.usuraj35@gmail.com
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: dc395x: Remove pci-dma-compat wrapper API

The legacy API wrappers in include/linux/pci-dma-compat.h should go away as
they create unnecessary midlayering for include/linux/dma-mapping.h API.
Instead use dma-mapping.h API directly.

The patch has been generated with the coccinelle script below.
Compile tested.

@@@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL

@@@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE

@@@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE

@@@@
- PCI_DMA_NONE
+ DMA_NONE

@@ expression E1, E2, E3; @@
- pci_alloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3; @@
- pci_zalloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3, E4; @@
- pci_free_consistent(E1, E2, E3, E4)
+ dma_free_coherent(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_single(E1, E2, E3, E4)
+ dma_map_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_single(E1, E2, E3, E4)
+ dma_unmap_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4, E5; @@
- pci_map_page(E1, E2, E3, E4, E5)
+ dma_map_page(&E1->dev, E2, E3, E4, E5)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_page(E1, E2, E3, E4)
+ dma_unmap_page(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_sg(E1, E2, E3, E4)
+ dma_map_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_sg(E1, E2, E3, E4)
+ dma_unmap_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_cpu(E1, E2, E3, E4)
+ dma_sync_single_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_device(E1, E2, E3, E4)
+ dma_sync_single_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_cpu(E1, E2, E3, E4)
+ dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_device(E1, E2, E3, E4)
+ dma_sync_sg_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2; @@
- pci_dma_mapping_error(E1, E2)
+ dma_mapping_error(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_consistent_dma_mask(E1, E2)
+ dma_set_coherent_mask(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_dma_mask(E1, E2)
+ dma_set_mask(&E1->dev, E2)

Link: https://lore.kernel.org/r/b8acc51ec774507050a9e9e8edf28e4933322a9e.1596045683.git.usuraj35@gmail.com
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aic7xxx: Remove pci-dma-compat wrapper API

The legacy API wrappers in include/linux/pci-dma-compat.h should go away as
they create unnecessary midlayering for include/linux/dma-mapping.h API.
Instead use dma-mapping.h API directly.

The patch has been generated with the coccinelle script below.  And has
been hand modified to replace each GFP_ with the correct flag depending
upon the context.  Compile-tested.

@@@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL

@@@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE

@@@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE

@@@@
- PCI_DMA_NONE
+ DMA_NONE

@@ expression E1, E2, E3; @@
- pci_alloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3; @@
- pci_zalloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3, E4; @@
- pci_free_consistent(E1, E2, E3, E4)
+ dma_free_coherent(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_single(E1, E2, E3, E4)
+ dma_map_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_single(E1, E2, E3, E4)
+ dma_unmap_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4, E5; @@
- pci_map_page(E1, E2, E3, E4, E5)
+ dma_map_page(&E1->dev, E2, E3, E4, E5)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_page(E1, E2, E3, E4)
+ dma_unmap_page(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_sg(E1, E2, E3, E4)
+ dma_map_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_sg(E1, E2, E3, E4)
+ dma_unmap_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_cpu(E1, E2, E3, E4)
+ dma_sync_single_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_device(E1, E2, E3, E4)
+ dma_sync_single_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_cpu(E1, E2, E3, E4)
+ dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_device(E1, E2, E3, E4)
+ dma_sync_sg_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2; @@
- pci_dma_mapping_error(E1, E2)
+ dma_mapping_error(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_consistent_dma_mask(E1, E2)
+ dma_set_coherent_mask(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_dma_mask(E1, E2)
+ dma_set_mask(&E1->dev, E2)

Link: https://lore.kernel.org/r/790a8751b5c2b5393c3021b8def08e47bb1597c0.1596045683.git.usuraj35@gmail.com
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Remove pci-dma-compat wrapper API

The legacy API wrappers in include/linux/pci-dma-compat.h should go away as
they create unnecessary midlayering for include/linux/dma-mapping.h API.
Instead use dma-mapping.h API directly.

The patch has been generated with the coccinelle script below.
Compile-tested.

@@@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL

@@@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE

@@@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE

@@@@
- PCI_DMA_NONE
+ DMA_NONE

@@ expression E1, E2, E3; @@
- pci_alloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3; @@
- pci_zalloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3, E4; @@
- pci_free_consistent(E1, E2, E3, E4)
+ dma_free_coherent(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_single(E1, E2, E3, E4)
+ dma_map_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_single(E1, E2, E3, E4)
+ dma_unmap_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4, E5; @@
- pci_map_page(E1, E2, E3, E4, E5)
+ dma_map_page(&E1->dev, E2, E3, E4, E5)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_page(E1, E2, E3, E4)
+ dma_unmap_page(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_sg(E1, E2, E3, E4)
+ dma_map_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_sg(E1, E2, E3, E4)
+ dma_unmap_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_cpu(E1, E2, E3, E4)
+ dma_sync_single_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_device(E1, E2, E3, E4)
+ dma_sync_single_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_cpu(E1, E2, E3, E4)
+ dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_device(E1, E2, E3, E4)
+ dma_sync_sg_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2; @@
- pci_dma_mapping_error(E1, E2)
+ dma_mapping_error(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_consistent_dma_mask(E1, E2)
+ dma_set_coherent_mask(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_dma_mask(E1, E2)
+ dma_set_mask(&E1->dev, E2)

Link: https://lore.kernel.org/r/f8d4778440d55ba26c04eef0f7d63fb211a39443.1596045683.git.usuraj35@gmail.com
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libcxgbi: Use kvzalloc instead of opencoded kzalloc/vzalloc

Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions and use
kvzalloc/kvfree instead. __GFP_NOWARN added to kvzalloc() call because we
already print a warning in case of allocation fail.

Link: https://lore.kernel.org/r/20200801133123.61834-1-efremov@linux.com
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: dc395x: Use %*ph to print small buffer

Use %*ph format to print small buffer as hex string.

Link: https://lore.kernel.org/r/20200730153535.39691-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Remove superfluous memset()

Fixes coccicheck warning:

./drivers/scsi/mpt3sas/mpt3sas_base.c:5247:16-34: WARNING: dma_alloc_coherent use in ioc -> request already zeroes out memory,  so memset is not needed

dma_alloc_coherent() already zeroes out memory so memset() is not needed.

Link: https://lore.kernel.org/r/1596079918-41115-4-git-send-email-liheng40@huawei.com
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove superfluous memset()

Fixes coccicheck warning:

./drivers/scsi/qla2xxx/qla_mbx.c:4928:15-33: WARNING: dma_alloc_coherent use in els_cmd_map already zeroes out memory,  so memset is not needed

dma_alloc_coherent() already zeroes out memory so memset() is not needed.

Link: https://lore.kernel.org/r/1596079918-41115-3-git-send-email-liheng40@huawei.com
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pmcraid: Remove superfluous memset()

Fixes coccicheck warning:

./drivers/scsi/pmcraid.c:4709:3-21: WARNING: dma_alloc_coherent use in pinstance -> hrrq_start [ i ] already zeroes out memory,  so memset is not needed

dma_alloc_coherent() already zeroes out memory so memset() is not needed.

Link: https://lore.kernel.org/r/1596079918-41115-2-git-send-email-liheng40@huawei.com
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mvsas: Remove superfluous memset()

Fixes coccicheck warning:

./drivers/scsi/mvsas/mv_init.c:244:11-29: WARNING: dma_alloc_coherent use in mvi -> tx already zeroes out memory,  so memset is not needed
./drivers/scsi/mvsas/mv_init.c:250:15-33: WARNING: dma_alloc_coherent use in mvi -> rx_fis already zeroes out memory,  so memset is not needed
./drivers/scsi/mvsas/mv_init.c:256:11-29: WARNING: dma_alloc_coherent use in mvi -> rx already zeroes out memory,  so memset is not needed
./drivers/scsi/mvsas/mv_init.c:265:13-31: WARNING: dma_alloc_coherent use in mvi -> slot already zeroes out memory,  so memset is not needed

dma_alloc_coherent() already zeroes out memory so memset() is not needed.

Link: https://lore.kernel.org/r/1596078235-54002-1-git-send-email-liheng40@huawei.com
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mptctl: Remove unneeded cast from memory allocation

Remove casting the values returned by memory allocation function.

Coccinelle emits WARNING:

./drivers/message/fusion/mptctl.c:2596:14-31: WARNING: casting value returned by memory allocation function to (SCSIDevicePage0_t *) is useless.
./drivers/message/fusion/mptctl.c:2660:15-32: WARNING: casting value returned by memory allocation function to (SCSIDevicePage3_t *) is useless.

Link: https://lore.kernel.org/r/1596014390-18605-1-git-send-email-liheng40@huawei.com
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mptfc: Remove unneeded cast from memory allocation

Remove casting the values returned by memory allocation function.

Coccinelle emits WARNING:

./drivers/message/fusion/mptfc.c:766:17-30: WARNING: casting value returned by memory allocation function to (FCPortPage0_t *) is useless.
./drivers/message/fusion/mptfc.c:907:17-30: WARNING: casting value returned by memory allocation function to (FCPortPage1_t *) is useless.

[mkp: memset()]

Link: https://lore.kernel.org/r/1596014354-59935-1-git-send-email-liheng40@huawei.com
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-mediatek: Modify the minimum RX/TX lane count to 2

MediaTek UFS host now supports 2 lanes. Modify the lane count to 2.

This modification shall not impact old 1-lane host because
PA_CONNECTEDRXDATALANES and PA_CONNECTEDTXDATALANES will limit the target
lanes properly during power mode change. So we could relax the limitation
in ufs_dev_params.

Link: https://lore.kernel.org/r/20200819084340.7021-1-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Remove an unpaired ufshcd_scsi_unblock_requests() in err_handler()

Commit 5586dd8ea250 ("scsi: ufs: Fix a race condition between error handler
and runtime PM ops") moves the ufshcd_scsi_block_requests() inside
err_handler() but forgets to remove the ufshcd_scsi_unblock_requests() in
the early return path. Correct the mistake.

Link: https://lore.kernel.org/r/1597798958-24322-1-git-send-email-cang@codeaurora.org
Fixes: 5586dd8ea250 ("scsi: ufs: Fix a race condition between error handler and runtime PM ops")
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Hongwu Su<hongwus@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Change fDeviceInit busy wait

Currently, the UFS driver busy waits for fDeviceInit to be cleared. Provide
an upper bound and sleep between attempts instead of busy waiting.

Link: https://lore.kernel.org/r/1597053747-75171-1-git-send-email-kwmad.kim@samsung.com
Tested-by: Kiwoong Kim <kwmad.kim@samsung.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Remove several redundant goto statements

Link: https://lore.kernel.org/r/20200814095034.20709-3-huobean@gmail.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Change ufshcd_comp_devman_upiu() to ufshcd_compose_devman_upiu()

ufshcd_comp_devman_upiu() was poorly named leading people to think it was a
completion function. Rename it to ufshcd_compose_devman_upiu().

Link: https://lore.kernel.org/r/20200814095034.20709-2-huobean@gmail.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Fix race between ELS completion and flushing ELS request

Fix race between ELS completion and flushing ELS request.

Link: https://lore.kernel.org/r/20200807110656.19965-8-jhasan@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Don't process ELS completion if event is flushed or cleaned up

Don't process ELS completion if event is flushed or cleaned up.

Link: https://lore.kernel.org/r/20200807110656.19965-7-jhasan@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Initiate cleanup for ELS commands as well

Initiate cleanup for ELS commands as well.

Link: https://lore.kernel.org/r/20200807110656.19965-6-jhasan@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Send cleanup even for RRQ on timeout

Send cleanup even for RRQ on timeout.

Link: https://lore.kernel.org/r/20200807110656.19965-5-jhasan@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Do not kill timeout work for original I/O on RRQ completion

The timer is already cancelled when abort is completed, hence no need to
cancel it again.

Link: https://lore.kernel.org/r/20200807110656.19965-4-jhasan@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Check the validity of rjt frame before processing

This is reported by Klockwork.

Link: https://lore.kernel.org/r/20200807110656.19965-3-jhasan@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Check for port type and role before processing an event

The rport lock gets initialized during offload. If a non-FCP or non-target
rport got logout then this rport will be uninitialized. KASAN was
complaining because of it.

=========
[   14.384434] the code is fine but needs lockdep annotation.
[   14.384482] turning off the locking correctness validator.
========

Link: https://lore.kernel.org/r/20200807110656.19965-2-jhasan@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-qcom: Remove unused MSM bus scaling APIs

MSM bus scaling has moved on to use interconnect framework and downstream
bus scaling APIs like msm_bus_scale*() do not exist anymore in the
kernel. Currently they are guarded by a config which also does not exist
and hence there are no build failures reported. Remove these unused
interfaces as they are currently no-ops and the scaling support that may be
added in future will use interconnect API.

Link: https://lore.kernel.org/r/20200804161033.15586-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Bump version to 1.2.16-010

Link: https://lore.kernel.org/r/159622931040.30579.9167901134341507088.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Gerry Morong <gerry.morong@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add RAID bypass counter

Add a counter to assist in verifying when RAID bypass is being used.

Link: https://lore.kernel.org/r/159622930468.30579.13153724465552773544.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Support device deletion via sysfs

Support device deletion via sysfs.

I.e: echo 1 > /sys/block/sd<X>/device/delete

Link: https://lore.kernel.org/r/159622929885.30579.2727491506675011534.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Avoid crashing kernel for controller issues

Eliminate kernel panics when getting invalid responses from controller.
Take controller offline instead of causing kernel panics.

Link: https://lore.kernel.org/r/159622929306.30579.16523318707596752828.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Prasad Munirathnam <Prasad.Munirathnam@microsemi.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update logical volume size after expansion

Have OS rescan after logical volume expansion to reflect new size.

Link: https://lore.kernel.org/r/159622928727.30579.298277463169866711.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add id support for SmartRAID 3152-8i

VID_9005, DID_028F, SVID_9005 and SDID_080A.

Link: https://lore.kernel.org/r/159622928143.30579.14769183842894725454.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Identify physical devices without issuing INQUIRY

Eliminate issuing INQUIRYs to problematic devices by using information
provided by controller.

Link: https://lore.kernel.org/r/159622927172.30579.3960527536810532094.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Update driver version to 35.100.00.00

Updated driver version to 35.100.00.00

Link: https://lore.kernel.org/r/1596096229-3341-8-git-send-email-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Postprocessing of target and LUN reset

If driver has not received the interrupt for the aborted SCSI command
before processing the TM reply, driver polls all the reply descriptor pools
looking for the reply for the aborted SCSI command before marking TM as
FAILED. If it finds the reply, then it marks the TM as SUCCESS otherwise it
marks it FAILED.

scsih_tm_cmd_map_status() checks whether TM has aborted the timed out SCSI
command or not. If TM has aborted the IO, then it returns SUCCESS else it
returns FAILED.

Link: https://lore.kernel.org/r/1596096229-3341-7-git-send-email-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Add functions to check if any cmd is outstanding on Target and LUN

Add helper functions to check whether any SCSI command is outstanding on
particular Target, LUN device.

Also add function parameters 'channel', 'id' to function
mpt3sas_scsih_issue_tm().

Link: https://lore.kernel.org/r/1596096229-3341-6-git-send-email-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Rename and export interrupt mask/unmask functions

Rename Function _base_unmask_interrupts() to
mpt3sas_base_unmask_interrupts() and _base_mask_interrupts() to
mpt3sas_base_mask_interrupts(). Also add function declarion to
mpt3sas_base.h

Link: https://lore.kernel.org/r/1596096229-3341-5-git-send-email-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Cancel the running work during host reset

It is not recommended to issue back-to-back host reset without any delay.
However, if someone issues back-to-back host reset then we observe that
target devices get unregistered and re-register with SML.  And if OS drive
is behind the HBA when it gets unregistered, then file-system goes into
read-only mode.

Normally during host reset, driver marks accessible target devices as
responding and triggers the event MPT3SAS_REMOVE_UNRESPONDING_DEVICES to
remove any non-responding devices through FW worker thread. While
processing this event, driver unregisters the non-responding devices and
clears the responding flag for all the devices.

Currently, during host reset, driver is cancelling only those Firmware
event works which are pending in Firmware event workqueue. It is not
cancelling work which is currently running. Change the driver to cancel all
events.

Link: https://lore.kernel.org/r/1596096229-3341-4-git-send-email-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Dump system registers for debugging

When controller fails to transition to READY state during driver probe,
dump the system interface register set. This will give snapshot of the
firmware status for debugging driver load issues.

Link: https://lore.kernel.org/r/1596096229-3341-3-git-send-email-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Memset config_cmds.reply buffer with zeros

Currently config_cmds.reply buffer is not memset to zero before posting
config page request message.  In some cases, for the current config
request, the previous config reply is getting processed and we will observe
PageType mismatch between request to reply buffer. It will be difficult to
debug this type of issue and it confuses by thinking that HBA Firmware
itself posted the wrong config reply.  So it is better to memset the
config_cmds.reply buffer with zeros before issuing the config request.

Link: https://lore.kernel.org/r/1596096229-3341-2-git-send-email-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Properly release resources if a task is aborted successfully

In current UFS task abort hook, namely ufshcd_abort(), if one task is
aborted successfully, clk_gating.active_reqs held by this task is not
decreased, which makes clk_gating.active_reqs stay above zero forever, thus
clock gating would never happen. Instead of releasing resources of one task
"manually", use the existing func __ufshcd_transfer_req_compl().  This
change also eliminates a possible race of scsi_dma_unmap() from the real
completion in IRQ handler path.

Link: https://lore.kernel.org/r/1596975355-39813-10-git-send-email-cang@codeaurora.org
Fixes: 1ab27c9cf8b6 ("ufs: Add support for clock gating")
CC: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Fix a race condition between error handler and runtime PM ops

The current IRQ handler blocks SCSI requests before scheduling eh_work,
when error handler calls pm_runtime_get_sync, if ufshcd_suspend/resume
sends a SCSI cmd, most likely the SSU cmd, since SCSI requests are blocked,
pm_runtime_get_sync() will never return because ufshcd_suspend/resume is
blocked by the SCSI cmd.

 - In queuecommand path, hba->ufshcd_state check and ufshcd_send_command
   should stay under the same spin lock. This is to make sure that no more
   commands leak into doorbell after hba->ufshcd_state is changed.

 - Don't block SCSI requests before error handler starts to run, let error
   handler block SCSI requests when it is ready to start error recovery.

 - Don't let SCSI layer keep requeuing the SCSI cmds sent from HBA runtime
   PM ops, let them pass or fail them. Let them pass if eh_work is
   scheduled due to non-fatal errors. Fail them if eh_work is scheduled due
   to fatal errors, otherwise the cmds may eventually time out since UFS is
   in bad state, which gets error handler blocked for too long. If we fail
   the SCSI cmds sent from HBA runtime PM ops, HBA runtime PM ops fails
   too, but it does not hurt since error handler can recover HBA runtime PM
   error.

Link: https://lore.kernel.org/r/1596975355-39813-9-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Move dumps in IRQ handler to error handler

Performing dumps in the IRQ handler causes system stability issues. Move
dumps to the error handler and only print basic host registers here.

Link: https://lore.kernel.org/r/1596975355-39813-8-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Recover HBA runtime PM error in error handler

The current error handler can not recover HBA runtime PM error if
ufshcd_suspend/resume has failed due to UFS errors, e.g. hibern8 enter/exit
error or SSU cmd error. When this happens, error handler may fail
performing a full reset and restore because error handler always assumes
that power, IRQs and clocks are ready after pm_runtime_get_sync returns,
but actually they are not if ufshcd_resume fails[1].

If ufschd_suspend/resume fails due to UFS errors, runtime PM framework
saves the error value to dev.power.runtime_error. After that, HBA dev
runtime suspend/resume would not be invoked anymore unless runtime_error is
cleared[2].

In case of ufshcd_suspend/resume fails due to UFS errors, for scenario [1],
error handler cannot assume anything of pm_runtime_get_sync, meaning error
handler should explicitly turn ON powers, IRQs and clocks again. To get the
HBA runtime PM work as regard for scenario [2], error handler can clear the
runtime_error by calling pm_runtime_set_active() if full reset and restore
succeeds. And, more important, if pm_runtime_set_active() returns no error,
which means runtime_error has been cleared, we also need to resume those
scsi devices under HBA in case any of them has failed to be resumed due to
HBA runtime resume failure. This is to unblock blk_queue_enter in case
there are bios waiting inside it.

Link: https://lore.kernel.org/r/1596975355-39813-7-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Fix concurrency of error handler and other error recovery paths

Error recovery can be invoked from multiple code paths, including hibern8
enter/exit (from ufshcd_link_recovery), ufshcd_eh_host_reset_handler() and
eh_work scheduled from IRQ context. Ultimately, these paths are all trying
to invoke ufshcd_reset_and_restore() in either a synchronous or
asynchronous manner. This causes problems:

 - If link recovery happens during ungate work, ufshcd_hold() would be
   called recursively. Although commit 53c12d0ef6fc ("scsi: ufs: fix error
   recovery after the hibern8 exit failure") fixed a deadlock due to
   recursive calls of ufshcd_hold() by adding a check of eh_in_progress
   into ufshcd_hold, this check allows eh_work to run in parallel while
   link recovery is running.

 - Similar concurrency can also happen when error recovery is invoked from
   ufshcd_eh_host_reset_handler and ufshcd_link_recovery.

 - Concurrency can even happen between eh_works. eh_work, currently queued
   on system_wq, is allowed to have multiple instances running in parallel,
   but we don't have proper protection for that.

If any of above concurrency scenarios happen, error recovery would fail and
lead ufs device and host into bad states. To fix the concurrency problem,
this change queues eh_work on a single threaded workqueue and removes link
recovery calls from the hibern8 enter/exit path. In addition, make use of
eh_work in eh_host_reset_handler instead of calling
ufshcd_reset_and_restore. This unifies the UFS error recovery mechanism.

According to the UFSHCI JEDEC spec, hibern8 enter/exit error occurs when
the link is broken. This essentially applies to any power mode change
operations (since they all use PACP_PWR cmds in UniPro layer). So, if a
power mode change operation (including AH8 enter/exit) fails, mark link
state as UIC_LINK_BROKEN_STATE and schedule the eh_work.  In this case,
error handler needs to do a full reset and restore to recover the link back
to active. Before the link state is recovered to active,
ufshcd_uic_pwr_ctrl simply returns -ENOLINK to avoid more errors.

Link: https://lore.kernel.org/r/1596975355-39813-6-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Add some debug information to ufshcd_print_host_state()

Information about the last interrupt status and timestamp is helpful when
debugging system stability issues (IRQ starvation, for instance). Add this
information to ufshcd_print_host_state() output.

In addition, UFS device information such as model name and firmware version
also comes in handy during debugging. This is printed as well.

Link: https://lore.kernel.org/r/1596975355-39813-5-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-qcom: Remove testbus dump in ufs_qcom_dump_dbg_regs

Dumping testbus registers outputs a lot of information and can cause
stability issues. Remove the dump code.

Link: https://lore.kernel.org/r/1596975355-39813-4-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-qcom: Fix race conditions caused by ufs_qcom_testbus_config()

If ufs_qcom_dump_dbg_regs() calls ufs_qcom_testbus_config() from
ufshcd_suspend/resume and/or clk gate/ungate context, pm_runtime_get_sync()
and ufshcd_hold() will cause a race condition. Fix this by removing the
unnecessary calls of pm_runtime_get_sync() and ufshcd_hold().

Link: https://lore.kernel.org/r/1596975355-39813-3-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Add checks before setting clk-gating states

Clock gating can be turned on/off selectively which means the associated
state information is only correct if the feature is enabled. This change
makes sure that we only look at state of clk-gating if it is enabled.

Link: https://lore.kernel.org/r/1596975355-39813-2-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Linux 5.9-rc1

Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "A few differerent things in here.

  Seems like syzbot got some more io_uring bits wired up, and we got a
  handful of reports and the associated fixes are in here.

  General fixes too, and a lot of them marked for stable.

  Lastly, a bit of fallout from the async buffered reads, where we now
  more easily trigger short reads. Some applications don't really like
  that, so the io_read() code now handles short reads internally, and
  got a cleanup along the way so that it's now easier to read (and
  documented). We're now passing tests that failed before"

* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
  io_uring: short circuit -EAGAIN for blocking read attempt
  io_uring: sanitize double poll handling
  io_uring: internally retry short reads
  io_uring: retain iov_iter state over io_read/io_write calls
  task_work: only grab task signal lock when needed
  io_uring: enable lookup of links holding inflight files
  io_uring: fail poll arm on queue proc failure
  io_uring: hold 'ctx' reference around task_work queue + execute
  fs: RWF_NOWAIT should imply IOCB_NOIO
  io_uring: defer file table grabbing request cleanup for locked requests
  io_uring: add missing REQ_F_COMP_LOCKED for nested requests
  io_uring: fix recursive completion locking on oveflow flush
  io_uring: use TWA_SIGNAL for task_work uncondtionally
  io_uring: account locked memory before potential error case
  io_uring: set ctx sq/cq entry count earlier
  io_uring: Fix NULL pointer dereference in loop_rw_iter()
  io_uring: add comments on how the async buffered read retry works
  io_uring: io_async_buf_func() need not test page bit

parisc: fix PMD pages allocation by restoring pmd_alloc_one()

Commit 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.

Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.

Fixes: 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A few fixes on the block side of things:

   - Discard granularity fix (Coly)

   - rnbd cleanups (Guoqing)

   - md error handling fix (Dan)

   - md sysfs fix (Junxiao)

   - Fix flush request accounting, which caused an IO slowdown for some
     configurations (Ming)

   - Properly propagate loop flag for partition scanning (Lennart)"

* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
  block: fix double account of flush request's driver tag
  loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
  rnbd: no need to set bi_end_io in rnbd_bio_map_kern
  rnbd: remove rnbd_dev_submit_io
  md-cluster: Fix potential error pointer dereference in resize_bitmaps()
  block: check queue's limits.discard_granularity in __blkdev_issue_discard()
  md: get sysfs entry after redundancy attr group create

Merge tag 'riscv-for-linus-5.9-mw1' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fix from Palmer Dabbelt:
 "I collected a single fix during the merge window: we managed to break
  the early trap setup on !MMU, this fixes it"

* tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Setup exception vector for nommu platform

Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker:
 "Cleanup, SECCOMP_FILTER support, message printing fixes, and other
  changes to arch/sh"

* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
  sh: landisk: Add missing initialization of sh_io_port_base
  sh: bring syscall_set_return_value in line with other architectures
  sh: Add SECCOMP_FILTER
  sh: Rearrange blocks in entry-common.S
  sh: switch to copy_thread_tls()
  sh: use the generic dma coherent remap allocator
  sh: don't allow non-coherent DMA for NOMMU
  dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
  sh: unexport register_trapped_io and match_trapped_io_handler
  sh: don't include <asm/io_trapped.h> in <asm/io.h>
  sh: move the ioremap implementation out of line
  sh: move ioremap_fixed details out of <asm/io.h>
  sh: remove __KERNEL__ ifdefs from non-UAPI headers
  sh: sort the selects for SUPERH alphabetically
  sh: remove -Werror from Makefiles
  sh: Replace HTTP links with HTTPS ones
  arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
  sh: stacktrace: Remove stacktrace_ops.stack()
  sh: machvec: Modernize printing of kernel messages
  sh: pci: Modernize printing of kernel messages
  ...