review.tizen.org Git - platform/kernel/linux-rpi.git/log

net: dsa: mv88e6xxx: move link forcing to mac_prepare/mac_finish

Move the link forcing out of mac_config() and into the mac_prepare()
and mac_finish() methods. This results in no change to the order in
which these operations are performed, but does mean when we convert
mv88e6xxx to phylink_pcs support, we will continue to preserve this
ordering.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: add support for mac_prepare() and mac_finish() calls

Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.

Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ynl: prefix uAPI header include with uapi/

To keep things simple we used to include the uAPI header
in the kernel in the #include <linux/$family.h> format.
This works well enough, most of the genl families should
have headers in include/net/ so linux/$family.h ends up
referring to the uAPI header, anyway. And if it doesn't
no big deal, we'll just include more info than we need.

Unless that is there is a naming conflict. Someone recently
created include/linux/psp.h which will be a problem when
supporting the PSP protocol. (I'm talking about
work-in-progress patches, but it's just a proof that assuming
lack of name conflicts was overly optimistic.)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: handle VI shortage on ef100 by readjusting the channels

When fewer VIs are allocated than what is allowed we can readjust
the channels by calling efx_mcdi_alloc_vis() again.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/core: Enable socket busy polling on -RT

Busy polling is currently not allowed on PREEMPT_RT, because it disables
preemption while invoking the NAPI callback. It is not possible to acquire
sleeping locks with disabled preemption. For details see commit
20ab39d13e2e ("net/core: disable NET_RX_BUSY_POLL on PREEMPT_RT").

However, strict cyclic and/or low latency network applications may prefer busy
polling e.g., using AF_XDP instead of interrupt driven communication.

The preempt_disable() is used in order to prevent the poll_owner and NAPI owner
to be preempted while owning the resource to ensure progress. Netpoll performs
busy polling in order to acquire the lock. NAPI is locked by setting the
NAPIF_STATE_SCHED flag. There is no busy polling if the flag is set and the
"owner" is preempted. Worst case is that the task owning NAPI gets preempted and
NAPI processing stalls. This is can be prevented by properly prioritising the
tasks within the system.

Allow RX_BUSY_POLL on PREEMPT_RT if NETPOLL is disabled. Don't disable
preemption on PREEMPT_RT within the busy poll loop.

Tested on x86 hardware with v6.1-RT and v6.3-RT on Intel i225 (igc) with
AF_XDP/ZC sockets configured to run in busy polling mode.

Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'ib-leds-netdev-v6.5' of git://git./linux/kernel/git/lee/leds

Lee Jones says:

====================
Immutable branch between LEDs and netdev due for the v6.5 merge window

Andrew Lunn says:

  Christian Marangi and I will be continuing the work of offloading LED
  blinking to Ethernet MAC and PHY LED controllers. The next set of
  patches is again cross subsystem, LEDs and netdev. It also requires
  some patches you have in for-leds-next:

  a286befc24e8 leds: trigger: netdev: Use mutex instead of spinlocks
  509412749002 leds: trigger: netdev: Convert device attr to macro
  0fd93ac85826 leds: trigger: netdev: Rename add namespace to netdev trigger enum modes
  eb31ca4531a0 leds: trigger: netdev: Drop NETDEV_LED_MODE_LINKUP from mode
  3fc498cf54b4 leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename

  I'm assuming the new series will get nerged via netdev, with your
  Acked-by. Could you create a stable branch with these patches which
  can be pulled into netdev?

* tag 'ib-leds-netdev-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
  leds: trigger: netdev: Use mutex instead of spinlocks
  leds: trigger: netdev: Convert device attr to macro
  leds: trigger: netdev: Rename add namespace to netdev trigger enum modes
  leds: trigger: netdev: Drop NETDEV_LED_MODE_LINKUP from mode
  leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename
====================

Link: https://lore.kernel.org/r/20230525111521.GA411262@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

net/ipv4/raw.c
  3632679d9e4f ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol")
  c85be08fc4fa ("raw: Stop using RTO_ONLINK.")
https://lore.kernel.org/all/20230525110037.2b532b83@canb.auug.org.au/

Adjacent changes:

drivers/net/ethernet/freescale/fec_main.c
  9025944fddfe ("net: fec: add dma_wmb to ensure correct descriptor values")
  144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.4-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and bpf.

  Current release - regressions:

   - net: fix skb leak in __skb_tstamp_tx()

   - eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs

  Current release - new code bugs:

   - handshake:
      - fix sock->file allocation
      - fix handshake_dup() ref counting

   - bluetooth:
      - fix potential double free caused by hci_conn_unlink
      - fix UAF in hci_conn_hash_flush

  Previous releases - regressions:

   - core: fix stack overflow when LRO is disabled for virtual
     interfaces

   - tls: fix strparser rx issues

   - bpf:
      - fix many sockmap/TCP related issues
      - fix a memory leak in the LRU and LRU_PERCPU hash maps
      - init the offload table earlier

   - eth: mlx5e:
      - do as little as possible in napi poll when budget is 0
      - fix using eswitch mapping in nic mode
      - fix deadlock in tc route query code

  Previous releases - always broken:

   - udplite: fix NULL pointer dereference in __sk_mem_raise_allocated()

   - raw: fix output xfrm lookup wrt protocol

   - smc: reset connection when trying to use SMCRv2 fails

   - phy: mscc: enable VSC8501/2 RGMII RX clock

   - eth: octeontx2-pf: fix TSOv6 offload

   - eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize"

* tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
  udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
  net: phy: mscc: enable VSC8501/2 RGMII RX clock
  net: phy: mscc: remove unnecessary phydev locking
  net: phy: mscc: add support for VSC8501
  net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE
  net/handshake: Enable the SNI extension to work properly
  net/handshake: Unpin sock->file if a handshake is cancelled
  net/handshake: handshake_genl_notify() shouldn't ignore @flags
  net/handshake: Fix uninitialized local variable
  net/handshake: Fix handshake_dup() ref counting
  net/handshake: Remove unneeded check from handshake_dup()
  ipv6: Fix out-of-bounds access in ipv6_find_tlv()
  net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
  docs: netdev: document the existence of the mail bot
  net: fix skb leak in __skb_tstamp_tx()
  r8169: Use a raw_spinlock_t for the register locks.
  page_pool: fix inconsistency for page_pool_ring_[un]lock()
  bpf, sockmap: Test progs verifier error with latest clang
  bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
  bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
  ...

Merge tag 'for-v6.4-rc' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply fixes from Sebastian Reichel:

- Fix power_supply_get_battery_info for devices without parent devices
   resulting in NULL pointer dereference

- Fix desktop systems reporting to run on battery once a power-supply
   device with device scope appears (e.g. a HID keyboard with a battery)

- Ratelimit debug print about driver not providing data

- Fix race condition related to external_power_changed in multiple
   drivers (ab8500, axp288, bq25890, sc27xx, bq27xxx)

- Fix LED trigger switching from blinking to solid-on when charging
   finishes

- Fix multiple races in bq27xxx battery driver

- mt6360: handle potential ENOMEM from devm_work_autocancel

- sbs-charger: Fix SBS_CHARGER_STATUS_CHARGE_INHIBITED bit

- rt9467: avoid passing 0 to dev_err_probe

* tag 'for-v6.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (21 commits)
  power: supply: Fix logic checking if system is running from battery
  power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe
  power: supply: sbs-charger: Fix INHIBITED bit for Status reg
  power: supply: rt9467: Fix passing zero to 'dev_err_probe'
  power: supply: Ratelimit no data debug output
  power: supply: Fix power_supply_get_battery_info() if parent is NULL
  power: supply: bq24190: Call power_supply_changed() after updating input current
  power: supply: bq25890: Call power_supply_changed() after updating input current or voltage
  power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()
  power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize
  power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes
  power: supply: bq27xxx: Move bq27xxx_battery_update() down
  power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()
  power: supply: bq27xxx: Fix poll_interval handling and races on remove
  power: supply: bq27xxx: Fix I2C IRQ race on remove
  power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition
  power: supply: leds: Fix blink to LED on transition
  power: supply: sc27xx: Fix external_power_changed race
  power: supply: bq25890: Fix external_power_changed race
  power: supply: axp288_fuel_gauge: Fix external_power_changed race
  ...

Merge tag 'sound-6.4-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of small fixes:

   - HD-audio runtime PM bug fix

   - A couple of HD-audio quirks

   - Fix series of ASoC Intel AVS drivers

   - ASoC DPCM fix for a bug found on new Intel systems

   - A few other ASoC device-specific small fixes"

* tag 'sound-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Enable headset onLenovo M70/M90
  ASoC: dwc: move DMA init to snd_soc_dai_driver probe()
  ASoC: cs35l41: Fix default regmap values for some registers
  ALSA: hda: Fix unhandled register update during auto-suspend period
  ASoC: dt-bindings: tlv320aic32x4: Fix supply names
  ASoC: Intel: avs: Add missing checks on FE startup
  ASoC: Intel: avs: Fix avs_path_module::instance_id size
  ASoC: Intel: avs: Account for UID of ACPI device
  ASoC: Intel: avs: Fix declaration of enum avs_channel_config
  ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg
  ASoC: Intel: avs: Access path components under lock
  ASoC: Intel: avs: Fix module lookup
  ALSA: hda/ca0132: add quirk for EVGA X299 DARK
  ASoC: soc-pcm: test if a BE can be prepared
  ASoC: rt5682: Disable jack detection interrupt during suspend
  ASoC: lpass: Fix for KASAN use_after_free out of bounds

Merge tag 'platform-drivers-x86-v6.4-3' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
"Nothing special to report just a few small fixes"

* tag 'platform-drivers-x86-v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/intel/ifs: Annotate work queue on stack so object debug does not complain
  platform/x86: ISST: Remove 8 socket limit
  platform/mellanox: mlxbf-pmc: fix sscanf() error checking
  platform/x86/amd/pmf: Fix CnQF and auto-mode after resume
  platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0

Merge tag 'm68k-for-v6.4-tag2' of git://git./linux/kernel/git/geert/linux-m68k

Pull m68k fix from Geert Uytterhoeven:

- Fix signal frame issue causing user-space crashes on 68020/68030

* tag 'm68k-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Move signal frame following exception on 68020/030

s390/ism: Set DMA coherent mask

A future change will convert the DMA API implementation from the
architecture specific arch/s390/pci/pci_dma.c to using the common code
drivers/iommu/dma-iommu.c which the utilizes the same IOMMU hardware
through the s390-iommu driver. Unlike the s390 specific DMA API this
requires devices to correctly set the coherent mask to be allowed to use
IOVAs >2^32 in dma_alloc_coherent(). This was however not done for ISM
devices. ISM requires such addresses since currently the DMA aperture
for PCI devices starts at 2^32 and all calls to dma_alloc_coherent()
would thus fail.

Link: https://lore.kernel.org/all/20230310-dma_iommu-v9-1-65bb8edd2beb@linux.ibm.com/
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230524075411.3734141-1-schnelle@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx4: Use bitmap_weight_and()

Use bitmap_weight_and() instead of hand writing it.

This saves a few LoC and is slightly faster, should it mater.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/a29c2348a062408bec45cee2601b2417310e5ea7.1684865809.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'net-tcp-make-txhash-use-consistent-for-ipv4'

Antoine Tenart says:

====================
net: tcp: make txhash use consistent for IPv4

Series is divided in two parts. First two commits make the txhash (used
for the skb hash in TCP) to be consistent for all IPv4/TCP packets (IPv6
doesn't have the same issue). Last commit improve a hash-related doc.

One example is when using OvS with dp_hash, which uses skb->hash, to
select a path. We'd like packets from the same flow to be consistent, as
well as the hash being stable over time when using net.core.txrehash=0.
Same applies for kernel ECMP which also can use skb->hash.
====================

Link: https://lore.kernel.org/r/20230523161453.196094-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Documentation: net: net.core.txrehash is not specific to listening sockets

The net.core.txrehash documentation mentions this knob is for listening
sockets only, while sk_rethink_txhash can be called on SYN and RTO
retransmits on all TCP sockets.

Remove the listening socket part.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ipv4: use consistent txhash in TIME_WAIT and SYN_RECV

When using IPv4/TCP, skb->hash comes from sk->sk_txhash except in
TIME_WAIT and SYN_RECV where it's not set in the reply skb from
ip_send_unicast_reply. Those packets will have a mismatched hash with
others from the same flow as their hashes will be 0. IPv6 does not have
the same issue as the hash is set from the socket txhash in those cases.

This commits sets the hash in the reply skb from ip_send_unicast_reply,
which makes the IPv4 code behaving like IPv6.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: tcp: make the txhash available in TIME_WAIT sockets for IPv4 too

Commit c67b85558ff2 ("ipv6: tcp: send consistent autoflowlabel in
TIME_WAIT state") made the socket txhash also available in TIME_WAIT
sockets but for IPv6 only. Make it available for IPv4 too as we'll use
it in later commits.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

leds: trigger: netdev: Use mutex instead of spinlocks

Some LEDs may require to sleep while doing some operation like setting
brightness and other cleanup.

For this reason, using a spinlock will cause a sleep under spinlock
warning.

It should be safe to convert this to a sleepable lock since:
- sysfs read/write can sleep
- netdev_trig_work is a work queue and can sleep
- netdev _trig_notify can sleep

The spinlock was used when brightness didn't support sleeping, but this
changed and now it supported with brightness_set_blocking().

Convert to mutex lock to permit sleeping using brightness_set_blocking().

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-6-ansuelsmth@gmail.com

leds: trigger: netdev: Convert device attr to macro

Convert link tx and rx device attr to a common macro to reduce common
code and in preparation for additional attr.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-5-ansuelsmth@gmail.com

leds: trigger: netdev: Rename add namespace to netdev trigger enum modes

Rename NETDEV trigger enum modes to a more symbolic name and add a
namespace to them.

Also add __TRIGGER_NETDEV_MAX to identify the max modes of the netdev
trigger.

This is a cleanup to drop the define and no behaviour change are
intended.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-4-ansuelsmth@gmail.com

leds: trigger: netdev: Drop NETDEV_LED_MODE_LINKUP from mode

Putting NETDEV_LED_MODE_LINKUP in the same list of the netdev trigger
modes is wrong as it's used to set the link state of the device and not
to set a blink mode as it's done by NETDEV_LED_LINK, NETDEV_LED_TX and
NETDEV_LED_RX. It's also wrong to put this state in the same bitmap of the
netdev trigger mode and should be external to it.

Drop NETDEV_LED_MODE_LINKUP from mode list and convert to a simple bool
that will be true or false based on the carrier link. No functional
change intended.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-3-ansuelsmth@gmail.com

leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename

Dev can be renamed also while up for supported device. We currently
wrongly clear the NETDEV_LED_MODE_LINKUP flag on NETDEV_CHANGENAME
event.

Fix this by rechecking if the carrier is ok on NETDEV_CHANGENAME and
correctly set the NETDEV_LED_MODE_LINKUP bit.

Fixes: 5f820ed52371 ("leds: trigger: netdev: fix handling on interface rename")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-2-ansuelsmth@gmail.com

udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().

syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using
IPPROTO_UDPLITE (0x88):

  14:25:52 executing program 1:
  r0 = socket$inet6(0xa, 0x80002, 0x88)

We had a similar report [1] for probably sk_memory_allocated_add()
in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix
NULL pointer dereference") fixed it by setting .memory_allocated for
udplite_prot and udplitev6_prot.

To fix the variant, we need to set either .sysctl_wmem_offset or
.sysctl_rmem.

Now UDP and UDPLITE share the same value for .memory_allocated, so we
use the same .sysctl_wmem_offset for UDP and UDPLITE.

[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023
RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline]
RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006
Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b
RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000
RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8
RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000
R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0
Call Trace:
<TASK>
__sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077
udp_rmem_schedule net/ipv4/udp.c:1539 [inline]
__udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581
__udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline]
udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775
udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793
__udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline]
__udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013
ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437
ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482
NF_HOOK include/linux/netfilter.h:303 [inline]
NF_HOOK include/linux/netfilter.h:297 [inline]
ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491
ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
NF_HOOK include/linux/netfilter.h:297 [inline]
ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491
__netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605
netif_receive_skb_internal net/core/dev.c:5691 [inline]
netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750
tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553
tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989
tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035
call_write_iter include/linux/fs.h:1868 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x945/0xd50 fs/read_write.c:584
ksys_write+0x12b/0x250 fs/read_write.c:637
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
entry_SYSENTER_compat_after_hwframe+0x70/0x82
RIP: 0023:0xf7f21579
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004
RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040
RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Modules linked in:

Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/
Fixes: 850cbaddb52d ("udp: use it's own memory accounting schema")
Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: phylink: provide phylink_pcs_config() and phylink_pcs_link_up()

Add two helper functions for calling PCS methods. phylink_pcs_config()
allows us to handle PCS configuration specifics in one location, rather
than the two call sites. phylink_pcs_link_up() gives us consistency.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1q1TzK-007Exd-Rs@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-phy-mscc-support-vsc8501'

David Epping says:

====================
net: phy: mscc: support VSC8501

this updated series of patches adds support for the VSC8501 Ethernet
PHY and fixes support for the VSC8502 PHY in cases where no other
software (like U-Boot) has initialized the PHY after power up.

The first patch simply adds the VSC8502 to the MODULE_DEVICE_TABLE,
where I guess it was unintentionally missing. I have no hardware to
test my change.

The second patch adds the VSC8501 PHY with exactly the same driver
implementation as the existing VSC8502.

The (new) third patch removes phydev locking from
vsc85xx_rgmii_set_skews(), as discussed for v2 of the patch set.

The (now) fourth patch fixes the initialization for VSC8501 and VSC8502.
I have tested this patch with VSC8501 on hardware in RGMII mode only.
https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/VSC8501-03_Datasheet_60001741A.PDF
https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/VSC8502-03_Datasheet_60001742B.pdf
Table 4-42 "RGMII CONTROL, ADDRESS 20E2 (0X14)" Bit 11 for each of
them.
By default the RX_CLK is disabled for these PHYs. In cases where no
other software, like U-Boot, enabled the clock, this results in no
received packets being handed to the MAC.
The patch enables this clock output.
According to Microchip support (case number 01268776) this applies
to all modes (RGMII, GMII, and MII).

Other PHYs sharing the same register map and code, like
VSC8530/31/40/41 have the clock enabled and the relevant bit 11 is
reserved and read-only for them. As per previous discussion the
patch still clears the bit on these PHYs, too, possibly more easily
supporting other future PHYs implementing this functionality.

For the VSC8572 family of PHYs, having a different register map,
no such changes are applied.
====================

Link: https://lore.kernel.org/r/20230523153108.18548-1-david.epping@missinglinkelectronics.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: mscc: enable VSC8501/2 RGMII RX clock

By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is
disabled. To allow packet forwarding towards the MAC it needs to be
enabled.

For other PHYs supported by this driver the clock output is enabled
by default.

Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502")
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: mscc: remove unnecessary phydev locking

Holding the struct phy_device (phydev) lock is unnecessary when
accessing phydev->interface in the PHY driver .config_init method,
which is the only place that vsc85xx_rgmii_set_skews() is called from.

The phy_modify_paged() function implements required MDIO bus level
locking, which can not be achieved by a phydev lock.

Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: mscc: add support for VSC8501

The VSC8501 PHY can use the same driver implementation as the VSC8502.
Adding the PHY ID and copying the handler functions of VSC8502 is
sufficient to operate it.

Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE

The mscc driver implements support for VSC8502, so its ID should be in
the MODULE_DEVICE_TABLE for automatic loading.

Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'bug-fixes-for-net-handshake'

Chuck Lever says:

====================
Bug fixes for net/handshake

Paolo observed that there is a possible leak of sock->file. I
haven't looked into that yet, but it seems to be separate from
the fixes in this series, so no need to hold these up.
====================

The submissions mentions net-next but it means netdev (perhaps
merge window left over when trees are converged). In any case,
it should have gone into net, but was instead applied to net-next
as commit deb2e484baf9 ("Merge branch 'net-handshake-fixes'").
These are fixes tho, and Chuck needs them to make progress with
the client so double-merging them into net... it is what it is :(

Link: https://lore.kernel.org/r/168381978252.84244.1933636428135211300.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/handshake: Enable the SNI extension to work properly

Enable the upper layer protocol to specify the SNI peername. This
avoids the need for tlshd to use a DNS lookup, which can return a
hostname that doesn't match the incoming certificate's SubjectName.

Fixes: 2fd5532044a8 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/handshake: Unpin sock->file if a handshake is cancelled

If user space never calls DONE, sock->file's reference count remains
elevated. Enable sock->file to be freed eventually in this case.

Reported-by: Jakub Kacinski <kuba@kernel.org>
Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/handshake: handshake_genl_notify() shouldn't ignore @flags

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/handshake: Fix uninitialized local variable

trace_handshake_cmd_done_err() simply records the pointer in @req,
so initializing it to NULL is sufficient and safe.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/handshake: Fix handshake_dup() ref counting

If get_unused_fd_flags() fails, we ended up calling fput(sock->file)
twice.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/handshake: Remove unneeded check from handshake_dup()

handshake_req_submit() now verifies that the socket has a file.

Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-05-24

We've added 19 non-merge commits during the last 10 day(s) which contain
a total of 20 files changed, 738 insertions(+), 448 deletions(-).

The main changes are:

1) Batch of BPF sockmap fixes found when running against NGINX TCP tests,
   from John Fastabend.

2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails,
   from Anton Protopopov.

3) Init the BPF offload table earlier than just late_initcall,
   from Jakub Kicinski.

4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields,
   from Will Deacon.

5) Remove a now unsupported __fallthrough in BPF samples,
   from Andrii Nakryiko.

6) Fix a typo in pkg-config call for building sign-file,
   from Jeremy Sowden.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Test progs verifier error with latest clang
  bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
  bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
  bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0
  bpf, sockmap: Build helper to create connected socket pair
  bpf, sockmap: Pull socket helpers out of listen test for general use
  bpf, sockmap: Incorrectly handling copied_seq
  bpf, sockmap: Wake up polling after data copy
  bpf, sockmap: TCP data stall on recv before accept
  bpf, sockmap: Handle fin correctly
  bpf, sockmap: Improved check for empty queue
  bpf, sockmap: Reschedule is now done through backlog
  bpf, sockmap: Convert schedule_work into delayed_work
  bpf, sockmap: Pass skb ownership through read_skb
  bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps
  bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
  samples/bpf: Drop unnecessary fallthrough
  bpf: netdev: init the offload table earlier
  selftests/bpf: Fix pkg-config call building sign-file
====================

Link: https://lore.kernel.org/r/20230524170839.13905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'spi-fix-v6.4-rc3' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A collection of fixes that came in since the merge window, plus an
  update to MAINTAINERS.

  The Cadence fixes are coming from the addition of device mode support,
  they required a couple of incremental updates in order to get
  something that works robustly for both device and controller modes"

* tag 'spi-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-cadence: Interleave write of TX and read of RX FIFO
  spi: dw: Replace spi->chip_select references with function calls
  spi: MAINTAINERS: drop Krzysztof Kozlowski from Samsung SPI
  spi: spi-cadence: Only overlap FIFO transactions in slave mode
  spi: spi-cadence: Avoid read of RX FIFO before its ready
  spi: spi-geni-qcom: Select FIFO mode for chip select

Merge tag 'regulator-fix-v6.4-rc3' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"Some fixes that came in since the merge window, nothing terribly
  exciting - a couple of driver specific fixes and a fix for the error
  handling when setting up the debugfs for the devices"

* tag 'regulator-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: mt6359: add read check for PMIC MT6359
  regulator: Fix error checking for debugfs_create_dir
  regulator: pca9450: Fix BUCK2 enable_mask

Merge tag 'mmc-v6.4-rc1' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"MMC core:

   - Fix error propagation for the non-block-device I/O paths

  MMC host:

   - sdhci-cadence: Fix an error path during probe

   - sdhci-esdhc-imx: Fix support for the 'no-mmc-hs400' DT property"

* tag 'mmc-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-esdhc-imx: make "no-mmc-hs400" works
  mmc: sdhci-cadence: Fix an error handling path in sdhci_cdns_probe()
  mmc: block: ensure error propagation for non-blk

Merge branch 'net-pcs-xpcs-cleanups-for-clause-73-support'

Russell King says:

====================
net: pcs: xpcs: cleanups for clause 73 support

This series cleans up xpcs code, moving much of the clause 73 code
out of the driver into places where others can make use of it.

Specifically, we add a helper to convert a clause 73 advertisement
to ethtool link modes to mdio.h, and a helper to resolve the clause
73 negotiation state to phylink, which includes the pause modes.

In doing this cleanup, several issues were identified with the
original xpcs implementation:

1) it masks the link partner advertisement with its own advertisement
   so userspace can't see what the full link partner advertisement
   was.
2) it was always setting pause modes irrespective of the advertisements
   on either end of the link.
3) it was reading the STAT1 registers multiple times. Reading STAT1
   has the side effect of unlatching the link-down status, so
   multiple reads should be avoided.

This patch series addresses the first two first by addressing the
issues, and then by moving over to the new helpers. The third issue
is solved by restructuring the xpcs code.
====================

Link: https://lore.kernel.org/r/ZGyR/jDyYTYzRklg@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pcs: xpcs: avoid reading STAT1 more than once

Avoid reading the STAT1 registers more than once while getting the PCS
state, as this register contains latching-low bits that are lost after
the first read.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pcs: xpcs: use phylink_resolve_c73() helper

Use phylink_resolve_c73() to resolve the clause 73 autonegotiation
result.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pcs: xpcs: correct pause resolution

xpcs was indicating symmetric pause should be enabled regardless of
the advertisements by either party. Fix this to use
linkmode_resolve_pause() now that we're no longer obliterating the
link partner's advertisement by logically anding it with our own.

This is transitional, the function will be entirely replaced with
phylink_resolve_c73() in the following patch.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pcs: xpcs: correct lp_advertising contents

lp_advertising is supposed to reflect the link partner's advertisement
unmodified by the local advertisement, but xpcs bitwise ands it with
the local advertisement prior to calculating the resolution of the
negotiation.

Fix this by moving the bitwise and to xpcs_resolve_lpa_c73() so it can
place the results in a temporary bitmap before passing that to
ixpcs_get_max_usxgmii_speed().

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pcs: xpcs: use mii_c73_to_linkmode() helper

Convert xpcs clause 73 reading to use the newly introduced
mii_c73_to_linkmode() helper to translate the link partner
advertisement to an ethtool bitmap.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pcs: xpcs: clean up reading clause 73 link partner advertisement

Read the clause 73 link partner advertisement in a loop and then
translate to the ethtool modes.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: add function to resolve clause 73 negotiation

Add a function to resolve clause 73 negotiation according to the
priority resolution function described in clause 73.3.6.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: remove duplicated linkmode pause resolution

Phylink had two chunks of code virtually the same for resolving the
negotiated pause modes. Factor this down to one function.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mdio: add clause 73 to ethtool conversion helper

Add a helper to convert a clause 73 advertisement to an ethtool bitmap.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ALSA: hda/realtek: Enable headset onLenovo M70/M90

Lenovo M70/M90 Gen4 are equipped with ALC897, and they need
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
The previous quirk for M70/M90 is for Gen3.

Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.4-rc3' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.4

A collection of fixes for v6.4, mostly driver specific but there's also
one fix for DPCM to avoid incorrectly repeated calls to prepare() which
can trigger issues on some systems.

Merge branch 'devlink-port_del-new-cleanup'

Jiri Pirko says:

====================
devlink: small port_new/del() cleanup

This patchset cleans up couple of leftovers after recent devlink locking
changes. Previously, both port_new/dev() commands were called without
holding instance lock. Currently all devlink commands are called with
instance lock held.

The first patch just removes redundant port notification.
The second one removes couple of outdated comments.
The last patch changes port_dev() to have devlink_port pointer as an arg
instead of port_index, which makes it similar to the rest of port
related ops.
====================

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: pass devlink_port pointer to ops->port_del() instead of index

Historically there was a reason why port_dev() along with for example
port_split() did get port_index instead of the devlink_port pointer.
With the locking changes that were done which ensured devlink instance
mutex is hold for every command, the port ops could get devlink_port
pointer directly. Change the forgotten port_dev() op to be as others
and pass devlink_port pointer instead of port_index.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: remove no longer true locking comment from port_new/del()

All commands are called holding instance lock. Remove the outdated
comment that says otherwise.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: remove duplicate port notification

The notification about created port is send from devl_port_register()
function called from ops->port_new(). No need to send it again here,
so remove the call and the helper function.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tools-ynl-byteorder'

Donald Hunter says:

====================
tools: ynl: Add byte-order support for struct members

This patchset adds support to ynl for handling byte-order in struct
members. The first patch is a refactor to use predefined Struct() objects
instead of generating byte-order specific formats on the fly. The second
patch adds byte-order handling for struct members.
====================

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

tools: ynl: Handle byte-order in struct members

Add support for byte-order in struct members in the genetlink-legacy
spec.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

tools: ynl: Use dict of predefined Structs to decode scalar types

Use a dict of predefined Struct() objects to decode scalar types in native,
big or little endian format. This removes the repetitive code for the
scalar variants and ensures all the signed variants are supported.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Fix out-of-bounds access in ipv6_find_tlv()

optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: c61a40432509 ("[IPV6]: Find option offset by type.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2023-05-22' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-fixes-2023-05-22

This series provides bug fixes for the mlx5 driver.
Please pull and let me know if there is any problem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: avoid kernel warning dump when stopping an errored PHY

When taking a network interface down (or removing a SFP module) after
the PHY has encountered an error, phy_stop() complains incorrectly
that it was called from HALTED state.

The reason this is incorrect is that the network driver will have
called phy_start() when the interface was brought up, and the fact
that the PHY has a problem bears no relationship to the administrative
state of the interface. Taking the interface administratively down
(which calls phy_stop()) is always the right thing to do after a
successful phy_start() call, whether or not the PHY has encountered
an error.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'RTO_ONLINK'

Guillaume Nault says:

====================
ipv4: Remove RTO_ONLINK from udp, ping and raw sockets.

udp_sendmsg(), ping_v4_sendmsg() and raw_sendmsg() use similar patterns
for restricting their route lookup to on-link hosts. Although they use
slightly different code, they all use RTO_ONLINK to override the least
significant bit of their tos value.

RTO_ONLINK is used to restrict the route scope even when the scope is
set to RT_SCOPE_UNIVERSE. Therefore it isn't necessary: we can properly
set the scope to RT_SCOPE_LINK instead.

Removing RTO_ONLINK will allow to convert .flowi4_tos to dscp_t in the
future, thus allowing to properly separate the DSCP from the ECN bits
in the networking stack.

This patch series defines a common helper to figure out what's the
scope of the route lookup. This unifies the way udp, ping and raw
sockets get their routing scope and removes their dependency on
RTO_ONLINK.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

udp: Stop using RTO_ONLINK.

Use ip_sendmsg_scope() to properly initialise the scope in
flowi4_init_output(), instead of overriding tos with the RTO_ONLINK
flag. The objective is to eventually remove RTO_ONLINK, which will
allow converting .flowi4_tos to dscp_t.

Now that the scope is determined by ip_sendmsg_scope(), we need to
check its result to set the 'connected' variable.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

raw: Stop using RTO_ONLINK.

Use ip_sendmsg_scope() to properly initialise the scope in
flowi4_init_output(), instead of overriding tos with the RTO_ONLINK
flag. The objective is to eventually remove RTO_ONLINK, which will
allow converting .flowi4_tos to dscp_t.

The MSG_DONTROUTE and SOCK_LOCALROUTE cases were already handled by
raw_sendmsg() (SOCK_LOCALROUTE was handled by the RT_CONN_FLAGS*()
macros called by get_rtconn_flags()). However, opt.is_strictroute
wasn't taken into account. Therefore, a side effect of this patch is to
now honour opt.is_strictroute, and thus align raw_sendmsg() with
ping_v4_sendmsg() and udp_sendmsg().

Since raw_sendmsg() was the only user of get_rtconn_flags(), we can now
remove this function.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ping: Stop using RTO_ONLINK.

Define a new helper to figure out the correct route scope to use on TX,
depending on socket configuration, ancillary data and send flags.

Use this new helper to properly initialise the scope in
flowi4_init_output(), instead of overriding tos with the RTO_ONLINK
flag.

The objective is to eventually remove RTO_ONLINK, which will allow
converting .flowi4_tos to dscp_t.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs

The commit c6d96df9fa2c ("net: ethernet: mtk_eth_soc: drop generic vlan rx
offload, only use DSA untagging") makes VLAN RX offloading to be only used
on the SoCs without the MTK_NETSYS_V2 ability (which are not just MT7621
and MT7622). The commit disables the proper handling of special tagged
(DSA) frames, added with commit 87e3df4961f4 ("net-next: ethernet:
mediatek: add CDM able to recognize the tag for DSA"), for non
MTK_NETSYS_V2 SoCs when it finds a MAC that does not use DSA. So if the
other MAC uses DSA, the CDMQ component transmits DSA tagged frames to the
CPU improperly. This issue can be observed on frames with TCP, for example,
a TCP speed test using iperf3 won't work.

The commit disables the proper handling of special tagged (DSA) frames
because it assumes that these SoCs don't use more than one MAC, which is
wrong. Although I made Frank address this false assumption on the patch log
when they sent the patch on behalf of Felix, the code still made changes
with this assumption.

Therefore, the proper handling of special tagged (DSA) frames must be kept
enabled in all circumstances as it doesn't affect non DSA tagged frames.

Hardware DSA untagging, introduced with the commit 2d7605a72906 ("net:
ethernet: mtk_eth_soc: enable hardware DSA untagging"), and VLAN RX
offloading are operations on the two CDM components of the frame engine,
CDMP and CDMQ, which connect to Packet DMA (PDMA) and QoS DMA (QDMA) and
are between the MACs and the CPU. These operations apply to all MACs of the
SoC so if one MAC uses DSA and the other doesn't, the hardware DSA
untagging operation will cause the CDMP component to transmit non DSA
tagged frames to the CPU improperly.

Since the VLAN RX offloading feature configuration was dropped, VLAN RX
offloading can only be used along with hardware DSA untagging. So, for the
case above, we need to disable both features and leave it to the CPU,
therefore software, to untag the DSA and VLAN tags.

So the correct way to handle this is:

For all SoCs:

Enable the proper handling of special tagged (DSA) frames
(MTK_CDMQ_IG_CTRL).

For non MTK_NETSYS_V2 SoCs:

Enable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Enable VLAN RX offloading (MTK_CDMP_EG_CTRL).

When a non MTK_NETSYS_V2 SoC MAC does not use DSA:

Disable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Disable VLAN RX offloading (MTK_CDMP_EG_CTRL).

Fixes: c6d96df9fa2c ("net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untagging")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: netdev: document the existence of the mail bot

We had a good run, but after 4 weeks of use we heard someone
asking about pw-bot commands. Let's explain its existence
in the docs. It's not a complete documentation but hopefully
it's enough for the casual contributor. The project and scope
are in flux so the details would likely become out of date,
if we were to document more in depth.

Link: https://lore.kernel.org/all/20230522140057.GB18381@nucnuc.mle/
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230522230903.1853151-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

gve: Support IPv6 Big TCP on DQ

Add support for using IPv6 Big TCP on DQ which can handle large TSO/GRO
packets. See https://lwn.net/Articles/895398/. This can improve the
throughput and CPU usage.

Perf test result:
ip -d link show $DEV
gso_max_size 185000 gso_max_segs 65535 tso_max_size 262143 tso_max_segs 65535 gro_max_size 185000

For performance, tested with neper using 9k MTU on hardware that supports 200Gb/s line rate.

In single streams when line rate is not saturated, we expect throughput improvements.
When the networking is performing at line rate, we expect cpu usage improvements.

Tcp_stream (unidirectional stream test, T=thread, F=flow):
skb=180kb, T=1, F=1, no zerocopy: throughput average=64576.88 Mb/s, sender stime=8.3, receiver stime=10.68
skb=64kb,  T=1, F=1, no zerocopy: throughput average=64862.54 Mb/s, sender stime=9.96, receiver stime=12.67
skb=180kb, T=1, F=1, yes zerocopy:  throughput average=146604.97 Mb/s, sender stime=10.61, receiver stime=5.52
skb=64kb,  T=1, F=1, yes zerocopy:  throughput average=131357.78 Mb/s, sender stime=12.11, receiver stime=12.25

skb=180kb, T=20, F=100, no zerocopy:  throughput average=182411.37 Mb/s, sender stime=41.62, receiver stime=79.4
skb=64kb,  T=20, F=100, no zerocopy:  throughput average=182892.02 Mb/s, sender stime=57.39, receiver stime=72.69
skb=180kb, T=20, F=100, yes zerocopy: throughput average=182337.65 Mb/s, sender stime=27.94, receiver stime=39.7
skb=64kb,  T=20, F=100, yes zerocopy: throughput average=182144.20 Mb/s, sender stime=47.06, receiver stime=39.01

Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230522201552.3585421-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: fix skb leak in __skb_tstamp_tx()

Commit 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with
TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with
zerocopy skbs. But it ended up adding a leak of its own. When
skb_orphan_frags_rx() fails, the function just returns, leaking the skb
it just cloned. Free it before returning.

This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.

Fixes: 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.")
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230522153020.32422-1-ptyadav@amazon.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'splice-net-replace-sendpage-with-sendmsg-msg_splice_pages-part-1'

David Howells says:

====================
splice, net: Replace sendpage with sendmsg(MSG_SPLICE_PAGES), part 1

Here's the first tranche of patches towards providing a MSG_SPLICE_PAGES
internal sendmsg flag that is intended to replace the ->sendpage() op with
calls to sendmsg().  MSG_SPLICE_PAGES is a hint that tells the protocol
that it should splice the pages supplied if it can and copy them if not.

This will allow splice to pass multiple pages in a single call and allow
certain parts of higher protocols (e.g. sunrpc, iwarp) to pass an entire
message in one go rather than having to send them piecemeal.  This should
also make it easier to handle the splicing of multipage folios.

A helper, skb_splice_from_iter() is provided to do the work of splicing or
copying data from an iterator.  If a page is determined to be unspliceable
(such as being in the slab), then the helper will give an error.

Note that this facility is not made available to userspace and does not
provide any sort of callback.

This set consists of the following parts:

(1) Define the MSG_SPLICE_PAGES flag and prevent sys_sendmsg() from being
     able to set it.

(2) Add an extra argument to skb_append_pagefrags() so that something
     other than MAX_SKB_FRAGS can be used (sysctl_max_skb_frags for
     example).

(3) Add the skb_splice_from_iter() helper to handle splicing pages into
     skbuffs for MSG_SPLICE_PAGES that can be shared by TCP, IP/UDP and
     AF_UNIX.

(4) Implement MSG_SPLICE_PAGES support in TCP.

(5) Make do_tcp_sendpages() just wrap sendmsg() and then fold it in to its
     various callers.

(6) Implement MSG_SPLICE_PAGES support in IP and make udp_sendpage() just
     a wrapper around sendmsg().

(7) Implement MSG_SPLICE_PAGES support in IP6/UDP6.

(8) Implement MSG_SPLICE_PAGES support in AF_UNIX.

(9) Make AF_UNIX copy unspliceable pages.

Link: https://lore.kernel.org/r/20230316152618.711970-1-dhowells@redhat.com/
Link: https://lore.kernel.org/r/20230329141354.516864-1-dhowells@redhat.com/
Link: https://lore.kernel.org/r/20230331160914.1608208-1-dhowells@redhat.com/
Link: https://lore.kernel.org/r/20230405165339.3468808-1-dhowells@redhat.com/
Link: https://lore.kernel.org/r/20230406094245.3633290-1-dhowells@redhat.com/
Link: https://lore.kernel.org/r/20230411160902.4134381-1-dhowells@redhat.com/
Link: https://lore.kernel.org/r/20230515093345.396978-1-dhowells@redhat.com/
Link: https://lore.kernel.org/r/20230518113453.1350757-1-dhowells@redhat.com/
====================

Link: https://lore.kernel.org/r/20230522121125.2595254-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

unix: Convert unix_stream_sendpage() to use MSG_SPLICE_PAGES

Convert unix_stream_sendpage() to use sendmsg() with MSG_SPLICE_PAGES
rather than directly splicing in the pages itself.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Kuniyuki Iwashima <kuniyu@amazon.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

af_unix: Support MSG_SPLICE_PAGES

Make AF_UNIX sendmsg() support MSG_SPLICE_PAGES, splicing in pages from the
source iterator if possible and copying the data in otherwise.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Kuniyuki Iwashima <kuniyu@amazon.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ip: Remove ip_append_page()

ip_append_page() is no longer used with the removal of udp_sendpage(), so
remove it.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udp: Convert udp_sendpage() to use MSG_SPLICE_PAGES

Convert udp_sendpage() to use sendmsg() with MSG_SPLICE_PAGES rather than
directly splicing in the pages itself.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ip6, udp6: Support MSG_SPLICE_PAGES

Make IP6/UDP6 sendmsg() support MSG_SPLICE_PAGES. This causes pages to be
spliced from the source iterator if possible, copying the data if not.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ip, udp: Support MSG_SPLICE_PAGES

Make IP/UDP sendmsg() support MSG_SPLICE_PAGES. This causes pages to be
spliced from the source iterator.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: Fold do_tcp_sendpages() into tcp_sendpage_locked()

Fold do_tcp_sendpages() into its last remaining caller,
tcp_sendpage_locked().

Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

siw: Inline do_tcp_sendpages()

do_tcp_sendpages() is now just a small wrapper around tcp_sendmsg_locked(),
so inline it, allowing do_tcp_sendpages() to be removed. This is part of
replacing ->sendpage() with a call to sendmsg() with MSG_SPLICE_PAGES set.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
cc: Jason Gunthorpe <jgg@ziepe.ca>
cc: Leon Romanovsky <leon@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: Inline do_tcp_sendpages()

do_tcp_sendpages() is now just a small wrapper around tcp_sendmsg_locked(),
so inline it, allowing do_tcp_sendpages() to be removed. This is part of
replacing ->sendpage() with a call to sendmsg() with MSG_SPLICE_PAGES set.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

espintcp: Inline do_tcp_sendpages()

do_tcp_sendpages() is now just a small wrapper around tcp_sendmsg_locked(),
so inline it, allowing do_tcp_sendpages() to be removed. This is part of
replacing ->sendpage() with a call to sendmsg() with MSG_SPLICE_PAGES set.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steffen Klassert <steffen.klassert@secunet.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_bpf: Inline do_tcp_sendpages as it's now a wrapper around tcp_sendmsg

do_tcp_sendpages() is now just a small wrapper around tcp_sendmsg_locked(),
so inline it. This is part of replacing ->sendpage() with a call to
sendmsg() with MSG_SPLICE_PAGES set.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jakub Sitnicki <jakub@cloudflare.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: Convert do_tcp_sendpages() to use MSG_SPLICE_PAGES

Convert do_tcp_sendpages() to use sendmsg() with MSG_SPLICE_PAGES rather
than directly splicing in the pages itself. do_tcp_sendpages() can then be
inlined in subsequent patches into its callers.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: Support MSG_SPLICE_PAGES

Make TCP's sendmsg() support MSG_SPLICE_PAGES. This causes pages to be
spliced or copied (if it cannot be spliced) from the source iterator.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: Add a function to splice pages into an skbuff for MSG_SPLICE_PAGES

Add a function to handle MSG_SPLICE_PAGES being passed internally to
sendmsg(). Pages are spliced into the given socket buffer if possible and
copied in if not (e.g. they're slab pages or have a zero refcount).

Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: Pass max frags into skb_append_pagefrags()

Pass the maximum number of fragments into skb_append_pagefrags() rather
than using MAX_SKB_FRAGS so that it can be used from code that wants to
specify sysctl_max_skb_frags.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: Declare MSG_SPLICE_PAGES internal sendmsg() flag

Declare MSG_SPLICE_PAGES, an internal sendmsg() flag, that hints to a
network protocol that it should splice pages from the source iterator
rather than copying the data if it can. This flag is added to a list that
is cleared by sendmsg syscalls on entry.

This is intended as a replacement for the ->sendpage() op, allowing a way
to splice in several multipage folios in one go.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8169: Use a raw_spinlock_t for the register locks.

The driver's interrupt service routine is requested with the
IRQF_NO_THREAD if MSI is available. This means that the routine is
invoked in hardirq context even on PREEMPT_RT. The routine itself is
relatively short and schedules a worker, performs register access and
schedules NAPI. On PREEMPT_RT, scheduling NAPI from hardirq results in
waking ksoftirqd for further processing so using NAPI threads with this
driver is highly recommended since it NULL routes the threaded-IRQ
efforts.

Adding rtl_hw_aspm_clkreq_enable() to the ISR is problematic on
PREEMPT_RT because the function uses spinlock_t locks which become
sleeping locks on PREEMPT_RT. The locks are only used to protect
register access and don't nest into other functions or locks. They are
also not used for unbounded period of time. Therefore it looks okay to
convert them to raw_spinlock_t.

Convert the three locks which are used from the interrupt service
routine to raw_spinlock_t.

Fixes: e1ed3e4d9111 ("r8169: disable ASPM during NAPI poll")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20230522134121.uxjax0F5@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: add L4 RSS hashing on UDP traffic

Add layer 4 RSS hashing on UDP traffic to allow for the
utilization of multiple queues for multiple connections on
the same IP address.

Previously, since the introduction of the driver, RSS hashing
was only performed on the source and destination IP addresses
of UDP packets thereby limiting UDP traffic to a single queue
for multiple connections on the same IP address. The transport
layer is now included in RSS hashing for UDP traffic, which
was not previously the case. The reason behind the previous
limitation is unclear - either a historic limitation of the
NFP device, or an oversight.

Signed-off-by: Jaco Coetzee <jaco.coetzee@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20230522141335.22536-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sfp: add support for HXSX-ATRI-1 copper SFP+ module

Walsun offers commercial ("C") and industrial ("I") variants of
multi-rate copper SFP+ modules.

Add quirk for HXSX-ATRI-1 using same parameters as the already supported
commercial variant HXSX-ATRC-1.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230522145242.30192-2-josua@solid-run.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

page_pool: fix inconsistency for page_pool_ring_[un]lock()

page_pool_ring_[un]lock() use in_softirq() to decide which
spin lock variant to use, and when they are called in the
context with in_softirq() being false, spin_lock_bh() is
called in page_pool_ring_lock() while spin_unlock() is
called in page_pool_ring_unlock(), because spin_lock_bh()
has disabled the softirq in page_pool_ring_lock(), which
causes inconsistency for spin lock pair calling.

This patch fixes it by returning in_softirq state from
page_pool_producer_lock(), and use it to decide which
spin lock variant to use in page_pool_producer_unlock().

As pool->ring has both producer and consumer lock, so
rename it to page_pool_producer_[un]lock() to reflect
the actual usage. Also move them to page_pool.c as they
are only used there, and remove the 'inline' as the
compiler may have better idea to do inlining or not.

Fixes: 7886244736a4 ("net: page_pool: Add bulk support for ptr_ring")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20230522031714.5089-1-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'tpmdd-v6.4-rc4' of git://git./linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fix from Jarkko Sakkinen:
"A fix to add a new entry to the deny for list for tpm_tis interrupts"

* tag 'tpmdd-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: Disable interrupts for AEON UPX-i11

tpm: tpm_tis: Disable interrupts for AEON UPX-i11

Interrupts got recently enabled for tpm_tis.

The interrupts initially works on the device but they will stop arriving
after circa ~200 interrupts. On system reboot/shutdown this will cause a
long wait (120000 jiffies).

[jarkko@kernel.org: fix a merge conflict and adjust the commit message]
Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Merge tag 'xtensa-20230523' of https://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa fixes from Max Filippov:

- fix signal delivery to FDPIC process

- add __bswap{si,di}2 helpers

* tag 'xtensa-20230523' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: add __bswap{si,di}2 helpers
xtensa: fix signal delivery to FDPIC process

ASoC: dwc: move DMA init to snd_soc_dai_driver probe()

When using DMA mode we are facing with Oops:
[  396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address 000000000000000c
[  396.469374] Oops [#1]
[  396.471839] Modules linked in:
[  396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty #68
[  396.483619] Hardware name: YMP ELCT FPGA (DT)
[  396.488156] epc : dmaengine_pcm_open+0x1d2/0x342
[  396.493227]  ra : dmaengine_pcm_open+0x1d2/0x342
[  396.498140] epc : ffffffff807fe346 ra : ffffffff807fe346 sp : ffffffc804e138f0
[  396.505602]  gp : ffffffff817bf730 tp : ffffffd8042c8ac0 t0 : 6500000000000000
[  396.513045]  t1 : 0000000000000064 t2 : 656e69676e65616d s0 : ffffffc804e13990
[  396.520477]  s1 : ffffffd801b86a18 a0 : 0000000000000026 a1 : ffffffff816920f8
[  396.527897]  a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000
[  396.535319]  a5 : 0000000000000000 a6 : ffffffd801b87040 a7 : 0000000000000038
[  396.542740]  s2 : ffffffd801b94a00 s3 : 0000000000000000 s4 : ffffffd80427f5e8
[  396.550153]  s5 : ffffffd80427f5e8 s6 : ffffffd801b44410 s7 : fffffffffffffff5
[  396.557569]  s8 : 0000000000000800 s9 : 0000000000000001 s10: ffffffff8066d254
[  396.564978]  s11: ffffffd8059cf768 t3 : ffffffff817d5577 t4 : ffffffff817d5577
[  396.572391]  t5 : ffffffff817d5578 t6 : ffffffc804e136e8
[  396.577876] status: 0000000200000120 badaddr: 000000000000000c cause: 000000000000000d
[  396.586007] [<ffffffff806839f4>] snd_soc_component_open+0x1a/0x68
[  396.592439] [<ffffffff807fdd62>] __soc_pcm_open+0xf0/0x502
[  396.598217] [<ffffffff80685d86>] soc_pcm_open+0x2e/0x4e
[  396.603741] [<ffffffff8066cea4>] snd_pcm_open_substream+0x442/0x68e
[  396.610313] [<ffffffff8066d1ea>] snd_pcm_open+0xfa/0x212
[  396.615868] [<ffffffff8066d39c>] snd_pcm_capture_open+0x3a/0x60
[  396.622048] [<ffffffff8065b35a>] snd_open+0xa8/0x17a
[  396.627421] [<ffffffff801ae036>] chrdev_open+0xa0/0x218
[  396.632893] [<ffffffff801a5a28>] do_dentry_open+0x17c/0x2a6
[  396.638713] [<ffffffff801a6d9a>] vfs_open+0x1e/0x26
[  396.643850] [<ffffffff801b8544>] path_openat+0x96e/0xc96
[  396.649518] [<ffffffff801b9390>] do_filp_open+0x7c/0xf6
[  396.655034] [<ffffffff801a6ff2>] do_sys_openat2+0x8a/0x11e
[  396.660765] [<ffffffff801a735a>] sys_openat+0x50/0x7c
[  396.666068] [<ffffffff80003aca>] ret_from_syscall+0x0/0x2
[  396.674964] ---[ end trace 0000000000000000 ]---

It happens because of play_dma_data/capture_dma_data pointers are NULL.
Current implementation assigns these pointers at snd_soc_dai_driver
startup() callback and reset them back to NULL at shutdown(). But
soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open()
before snd_soc_dai_driver startup().
Most generic DMA capable I2S drivers use snd_soc_dai_driver probe()
callback to init DMA pointers only once at probe. So move DMA init
to dw_i2s_dai_probe and drop shutdown() and startup() callbacks.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230512110343.66664-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Fix default regmap values for some registers

Several values do not match the defaults of CS35L41, fix them.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230414152552.574502-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'erofs-for-6.4-rc4-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:
"One patch addresses a null-ptr-deref issue reported by syzbot weeks
  ago, which is caused by the new long xattr name prefix feature and
  needs to be fixed.

  The remaining two patches are minor cleanups to avoid unnecessary
  compilation and adjust per-cpu kworker configuration.

  Summary:

   - Fix null-ptr-deref related to long xattr name prefixes

   - Avoid pcpubuf compilation if CONFIG_EROFS_FS_ZIP is off

   - Use high priority kthreads by default if per-cpu kthread workers
     are enabled"

* tag 'erofs-for-6.4-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: use HIPRI by default if per-cpu kthreads are enabled
  erofs: avoid pcpubuf.c inclusion if CONFIG_EROFS_FS_ZIP is off
  erofs: fix null-ptr-deref caused by erofs_xattr_prefixes_init

bpf, sockmap: Test progs verifier error with latest clang

With a relatively recent clang (7090c10273119) and with this commit
to fix warnings in selftests (c8ed668593972) that uses __sink(err)
to resolve unused variables. We get the following verifier error.

root@6e731a24b33a:/host/tools/testing/selftests/bpf# ./test_sockmap
libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied
libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG --
0: R1=ctx(off=0,imm=0) R10=fp0
; op = (int) skops->op;
0: (61) r2 = *(u32 *)(r1 +0)          ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; switch (op) {
1: (16) if w2 == 0x4 goto pc+5        ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
2: (56) if w2 != 0x5 goto pc+15       ; R2_w=5
; lport = skops->local_port;
3: (61) r2 = *(u32 *)(r1 +68)         ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (lport == 10000) {
4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
; __sink(err);
18: (bc) w1 = w0
R0 !read_ok
processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1
-- END PROG LOAD LOG --
libbpf: prog 'bpf_sockmap': failed to load: -13
libbpf: failed to load object 'test_sockmap_kern.bpf.o'
load_bpf_file: (-1) No such file or directory
ERROR: (-1) load bpf failed
libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied
libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG --
0: R1=ctx(off=0,imm=0) R10=fp0
; op = (int) skops->op;
0: (61) r2 = *(u32 *)(r1 +0)          ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; switch (op) {
1: (16) if w2 == 0x4 goto pc+5        ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
2: (56) if w2 != 0x5 goto pc+15       ; R2_w=5
; lport = skops->local_port;
3: (61) r2 = *(u32 *)(r1 +68)         ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (lport == 10000) {
4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
; __sink(err);
18: (bc) w1 = w0
R0 !read_ok
processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1
-- END PROG LOAD LOG --
libbpf: prog 'bpf_sockmap': failed to load: -13
libbpf: failed to load object 'test_sockhash_kern.bpf.o'
load_bpf_file: (-1) No such file or directory
ERROR: (-1) load bpf failed
libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied
libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG --
0: R1=ctx(off=0,imm=0) R10=fp0
; op = (int) skops->op;
0: (61) r2 = *(u32 *)(r1 +0)          ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; switch (op) {
1: (16) if w2 == 0x4 goto pc+5        ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
2: (56) if w2 != 0x5 goto pc+15       ; R2_w=5
; lport = skops->local_port;
3: (61) r2 = *(u32 *)(r1 +68)         ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (lport == 10000) {
4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
; __sink(err);
18: (bc) w1 = w0
R0 !read_ok
processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1
-- END PROG LOAD LOG --

To fix simply remove the err value because its not actually used anywhere
in the testing. We can investigate the root cause later. Future patch should
probably actually test the err value as well. Although if the map updates
fail they will get caught eventually by userspace.

Fixes: c8ed668593972 ("selftests/bpf: fix lots of silly mistakes pointed out by compiler")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-15-john.fastabend@gmail.com