drm/i915/gem: Update context name on closing

Update the context.name on closing so that the persistent requests are
clear in debug prints.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-3-chris@chris-wilson.co.uk

drm/i915/gem: Embed context/timeline name inside the GEM context

Use a small char buffer inside the i915_gem_context to store the user
friendly name so that ctx->name has the same lifetime as the RCU
protected GEM context. That is, e.g. when using print_request() that
prints the timeline name (ctx->name), the name will not be prematurely
freed upon the context being closed and the last reference dropped.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-2-chris@chris-wilson.co.uk

drm/i915: Protect context while grabbing its name for the request

Inside print_request(), we query the context/timeline name. Nothing
immediately protects the context from being freed if the request is
complete -- we rely on serialisation by the caller to keep the name
valid until they finish using it. Inside intel_engine_dump(), we
generally only print the requests in the execution queue protected by the
engine->active.lock, but we also show the pending execlists ports which
are not protected and so require a rcu_read_lock to keep the pointer
valid.

[ 1695.700883] BUG: KASAN: use-after-free in i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.700981] Read of size 8 at addr ffff8887344f4d50 by task gem_ctx_persist/2968
[ 1695.701068]
[ 1695.701156] CPU: 1 PID: 2968 Comm: gem_ctx_persist Tainted: G     U            5.4.0-rc6+ #331
[ 1695.701246] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 1695.701334] Call Trace:
[ 1695.701424]  dump_stack+0x5b/0x90
[ 1695.701870]  ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.701964]  print_address_description.constprop.7+0x36/0x50
[ 1695.702408]  ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702856]  ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702947]  __kasan_report.cold.10+0x1a/0x3a
[ 1695.703390]  ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.703836]  i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.704241]  print_request+0x82/0x2e0 [i915]
[ 1695.704638]  ? fwtable_read32+0x133/0x360 [i915]
[ 1695.705042]  ? write_timestamp+0x110/0x110 [i915]
[ 1695.705133]  ? _raw_spin_lock_irqsave+0x79/0xc0
[ 1695.705221]  ? refcount_inc_not_zero_checked+0x91/0x110
[ 1695.705306]  ? refcount_dec_and_mutex_lock+0x50/0x50
[ 1695.705709]  ? intel_engine_find_active_request+0x202/0x230 [i915]
[ 1695.706115]  intel_engine_dump+0x2c9/0x900 [i915]

Fixes: c36eebd9ba5d ("drm/i915/gt: execlists->active is serialised by the tasklet")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-1-chris@chris-wilson.co.uk

drm/i915/icl: Refine PG_HYSTERESIS

After doing some measuring, Icelake behaves on a par with Broadwell, and
without having to compromise for low power cores with long latencies, we
can reduce the powergating hysteresis so that the powersaving is enabled
faster. No impact observed on client side throughput measures (so
negligible increase in extra switching), and inspection from high
frequency polling using igt/gem_exec_nop/sequential, provided an estimate
for the upper bound before we can measure a substantial impact on
latency.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191110185806.17413-9-chris@chris-wilson.co.uk

drm/i915/perf: always consider holding preemption a privileged op

The ordering of the checks in the existing code can lead to holding
preemption not being considered as privileged op.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 9cd20ef7803c ("drm/i915/perf: allow holding preemption on filtered ctx")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111095308.2550-1-lionel.g.landwerlin@intel.com

drm/i915: Don't oops in dumb_create ioctl if we have no crtcs

Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.

Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.

Cc: stable@vger.kernel.org
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: aa5ca8b7421c ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/pmu: Only use exclusive mmio access for gen7

On gen7, we have to avoid concurrent access to the same mmio cacheline,
and so coordinate all mmio access with the uncore->lock. However, for
pmu, we want to avoid perturbing the system and disabling interrupts
unnecessarily, so restrict the w/a to gen7 where it is requied to
prevent machine hangs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108103511.20951-2-chris@chris-wilson.co.uk

drm/i915/pmu: Cheat when reading the actual frequency to avoid fw

We want to avoid taking forcewake when querying the performance stats,
as we wish to avoid perturbing the system under observation. (And with
the forcewake being kept alive for 1ms after use, sampling the frequency
from a 200Hz timer keeps forcewake 40% active.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108103511.20951-1-chris@chris-wilson.co.uk

drm/i915/selftests: Mark up sole accessor to ctx->vm as being protected

In the selftests, where we are accessing a private ctx from within the
confines of a single test, we know that the ctx->vm pointer is static
and bounded by the lifetime of the test. We can use a simple helper to
provide the RCU annotations to keep sparse happy.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107221201.30497-1-chris@chris-wilson.co.uk

drm/i915/selftests: Complete transition to a real struct file mock

Since drm provided us with a real struct file we can use for our
anonymous internal clients (mock_file), complete our transition to using
that as the primary interface (and not the mocked up struct drm_file we
previous were using).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107213929.23286-1-chris@chris-wilson.co.uk

drm/i915: make more headers self-contained

The headers in the gem/selftests/, gt/selftests, gvt/, selftests/
directories have never been compile-tested, but it would be possible
to make them self-contained.

This commit only addresses missing <linux/types.h> and forward
struct declarations.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108094142.25942-1-yamada.masahiro@socionext.com

drm/i915: change to_mock() to an inline function

Since this function is defined in a header file, it should be
'static inline' instead of 'static'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108051356.29980-1-yamada.masahiro@socionext.com

drm/i915: Expand documentation for gen12 DP pre-enable sequence

Rather than just specifying the bullet numbers from the bspec (e.g.,
"4.b") actually include the description of what the bspec wants us to
do.  Steps can be renumbered or moved so including the description will
help us match the code up to the spec.  Plus if we add support for new
platforms, some of the steps may be added/removed so more descriptive
comments will be useful for ensuring all of the bspec requirements are
met.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107174527.11165-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/selftests: Verify mmap_gtt revocation on unbinding

Whenever, we unbind (or change fence registers) on an object, we must
revoke any and all mmap_gtt using the previous bindings. Those user PTEs
point at the GGTT which know points into a new object, the wrong object.
Ergo, those PTEs must be cleared so that any user access provokes a new
page fault.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-5-chris@chris-wilson.co.uk

drm/i915/selftests: Wrap vm_mmap() around GEM objects

Provide a utility function to create a vma corresponding to an mmap() of
our device. And use it to exercise the equivalent of userspace
performing a GTT mmap of our objects.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-4-chris@chris-wilson.co.uk

drm/i915/selftests: Replace mock_file hackery with drm's true fake

As drm now exports a method to create an anonymous struct file around a
drm_device for internal use, make use of it to avoid our horrible hacks.

Danial suggested that the mock_file_put() wrapper was suitable for
drm-core, along with the mock_drm_getfile() [and that the vestigal
mock_drm_file() in this patch should perhaps be the drm interface
itself]. However, the eventual goal is to remove the mock_drm_file() and
use the struct file and fput() directly, in this patch we take a simple
transition in that direction.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-3-chris@chris-wilson.co.uk

drm: Expose a method for creating anonymous struct file around drm_minor

Sometimes we need to create a struct file to wrap a drm_device, as it
the user were to have opened /dev/dri/card0 but to do so anonymously
(i.e. for internal use). Provide a utility method to create a struct
file with the drm_device->driver.fops, that wrap the drm_device.

v2: Restrict usage to selftests

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-2-chris@chris-wilson.co.uk

drm: Move EXPORT_SYMBOL_FOR_TESTS_ONLY under a separate Kconfig

Currently, we only export symbols for drm-selftests which are either
compiled as modules or into the main drm builtin. However, if we want to
export symbols from drm.ko for the drivers' selftests, we require a
means of controlling that export separately. So we add a new Kconfig to
determine whether or not the EXPORT_SYMBOL_FOR_TESTS_ONLY() takes
effect.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-1-chris@chris-wilson.co.uk

drm/i915/gem: Safely acquire the ctx->vm when copying

As we read the ctx->vm unlocked before cloning/exporting, we should
validate our reference is correct before returning it. We already do for
clone_vm() but were not so strict around get_ppgtt().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106091312.12921-1-chris@chris-wilson.co.uk

drm/i915/gt: Defer engine registration until fully initialised

Only add the engine to the available set of uabi engines once it has
been fully initialised and we know we want it in the public set.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107081252.10542-17-chris@chris-wilson.co.uk

drm/i915: Preload LUTs if the hw isn't currently using them

The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.

However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.

Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.

v2: Deal with uapi vs. hw crtc state split
    s/GCM/CGM/ typo fix

Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d3ca0 ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

drm/i915: FB backing gem obj should reside in LMEM

If Local memory is supported by hardware, we want framebuffer backing
gem objects from local memory.

if the backing obj is not from LMEM, pin_to_display is failed.

v2:
  memory regions are correctly assigned to obj->memory_regions [tvrtko]
  migration failure is reported as debug log [Tvrtko]
v3:
  Migration is dropped. only error is reported [Daniel]
  mem region check is move to pin_to_display [Chris]
v4:
  s/dev_priv/i915 [chris]
v5:
  i915_gem_object_is_lmem is used for detecting the obj mem type. [Matt]

cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191105144414.30470-1-ramalingam.c@intel.com

drm/i915: Leave the aliasing-ppgtt size alone

The hidden aliasing-ppgtt's size is never revealed, as we only inspect
the front GTT when engaged. However, we were "fixing" the hidden ppgtt
to match, with the net result that we ended up leaking the unused
portion on Braswell were we preallocated the entire set of top level
PDP, see gen8_preallocate_top_level_pdp().

[   26.025364] DMA-API: pci 0000:00:02.0: device driver has pending DMA allocations while released from device [count=2]
[   26.025364] One of leaked entries details: [device address=0x0000000230778000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as single]
[   26.025683] WARNING: CPU: 0 PID: 415 at kernel/dma/debug.c:894 dma_debug_device_change+0x1a4/0x1f0
[   26.025905] Modules linked in: i915(E-) intel_powerclamp(E) nls_ascii(E) nls_cp437(E) crct10dif_pclmul(E) crc32_pclmul(E) vfat(E) crc32c_intel(E) fat(E) ghash_clmulni_intel(E) prime_numbers(E) intel_gtt(E) i2c_algo_bit(E) efi_pstore(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) evdev(E) drm(E) aesni_intel(E) glue_helper(E) crypto_simd(E) cryptd(E) intel_cstate(E) sg(E) efivars(E) pcspkr(E) video(E) button(E) efivarfs(E) ip_tables(E) x_tables(E) autofs4(E) sd_mod(E) lpc_ich(E) ahci(E) mfd_core(E) i2c_i801(E) libahci(E) i2c_designware_pci(E) i2c_designware_core(E)
[   26.026613] CPU: 0 PID: 415 Comm: rmmod Tainted: G            E     5.4.0-rc6+ #25
[   26.026837] Hardware name:  /, BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[   26.027080] RIP: 0010:dma_debug_device_change+0x1a4/0x1f0
[   26.027319] Code: 89 54 24 08 e8 ad 60 62 00 48 8b 54 24 08 48 89 c6 41 57 4d 89 e9 49 89 d8 44 89 f1 41 54 48 c7 c7 e0 61 06 82 e8 c1 aa f5 ff <0f> 0b 5a 59 48 83 3c 24 00 0f 85 97 26 00 00 8b 05 77 47 92 01 85
[   26.027600] RSP: 0018:ffff888228d2fcc8 EFLAGS: 00010282
[   26.027831] RAX: 0000000000000000 RBX: 0000000230778000 RCX: 0000000000000000
[   26.028053] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffed10451a5f8f
[   26.028279] RBP: ffff88823480c0b0 R08: 0000000000000001 R09: ffffed1046e83eb1
[   26.028500] R10: ffffed1046e83eb0 R11: ffff88823741f587 R12: ffffffff82067340
[   26.028725] R13: 0000000000001000 R14: 0000000000000002 R15: ffffffff82067480
[   26.028952] FS:  00007fdf3ed174c0(0000) GS:ffff888237400000(0000) knlGS:0000000000000000
[   26.029185] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   26.029405] CR2: 000055e211109030 CR3: 0000000230139000 CR4: 00000000001006f0
[   26.029622] Call Trace:
[   26.029846]  notifier_call_chain+0x67/0xa0
[   26.030076]  blocking_notifier_call_chain+0x5a/0x80
[   26.030305]  device_release_driver_internal+0x20d/0x260
[   26.030535]  driver_detach+0x7b/0xe1
[   26.030761]  bus_remove_driver+0x8c/0x153
[   26.030993]  pci_unregister_driver+0x2d/0xf0
[   26.032603]  i915_exit+0x16/0x1c [i915]

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 1eda701eace2 ("drm/i915/gtt: Recursive cleanup for gen8")
References: c082afac86cb ("drm/i915: Move aliasing_ppgtt underneath its i915_ggtt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106221223.7437-1-chris@chris-wilson.co.uk

drm/i915/display: only include intel_dp_link_training.h where needed

The intel_dp_link_training.h include has no need or place in
intel_display.h. Include it in intel_display.c instead.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: eadf6f9170d5 ("drm/i915/display/icl: Enable master-slaves in trans port sync")
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029103947.7535-1-jani.nikula@intel.com

drm/i915: use might_lock_nested in get_pages annotation

So strictly speaking the existing annotation is also ok, because we
have a chain of

obj->mm.lock#I915_MM_GET_PAGES -> fs_reclaim -> obj->mm.lock

(the shrinker cannot get at an object while we're in get_pages, hence
this is safe). But it's confusing, so try to take the right subclass
of the lock.

This does a bit reduce our lockdep based checking, but then it's also
less fragile, in case we ever change the nesting around.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173720.2696-3-daniel.vetter@ffwll.ch

lockdep: add might_lock_nested()

Necessary to annotate functions where we might acquire a
mutex_lock_nested() or similar. Needed by i915.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173720.2696-2-daniel.vetter@ffwll.ch

drm/i915: Switch obj->mm.lock lockdep annotations on its head

The trouble with having a plain nesting flag for locks which do not
naturally nest (unlike block devices and their partitions, which is
the original motivation for nesting levels) is that lockdep will
never spot a true deadlock if you screw up.

This patch is an attempt at trying better, by highlighting a bit more
of the actual nature of the nesting that's going on. Essentially we
have two kinds of objects:

- objects without pages allocated, which cannot be on any lru and are
  hence inaccessible to the shrinker.

- objects which have pages allocated, which are on an lru, and which
  the shrinker can decide to throw out.

For the former type of object, memory allocations while holding
obj->mm.lock are permissible. For the latter they are not. And
get/put_pages transitions between the two types of objects.

This is still not entirely fool-proof since the rules might change.
But as long as we run such a code ever at runtime lockdep should be
able to observe the inconsistency and complain (like with any other
lockdep class that we've split up in multiple classes). But there are
a few clear benefits:

- We can drop the nesting flag parameter from
  __i915_gem_object_put_pages, because that function by definition is
  never going allocate memory, and calling it on an object which
  doesn't have its pages allocated would be a bug.

- We strictly catch more bugs, since there's not only one place in the
  entire tree which is annotated with the special class. All the
  other places that had explicit lockdep nesting annotations we're now
  going to leave up to lockdep again.

- Specifically this catches stuff like calling get_pages from
  put_pages (which isn't really a good idea, if we can call get_pages
  so could the shrinker). I've seen patches do exactly that.

Of course I fully expect CI will show me for the fool I am with this
one here :-)

v2: There can only be one (lockdep only has a cache for the first
subclass, not for deeper ones, and we don't want to make these locks
even slower). Still separate enums for better documentation.

Real fix: don't forget about phys objs and pin_map(), and fix the
shrinker to have the right annotations ... silly me.

v3: Forgot usertptr too ...

v4: Improve comment for pages_pin_count, drop the IMPORTANT comment
and instead prime lockdep (Chris).

v5: Appease checkpatch, no double empty lines (Chris)

v6: More rebasing over selftest changes. Also somehow I forgot to
push this patch :-/

Also format comments consistently while at it.

v7: Fix typo in commit message (Joonas)

Also drop the priming, with the lmem merge we now have allocations
while holding the lmem lock, which wreaks the generic priming I've
done in earlier patches. Should probably be resurrected when lmem is
fixed. See

commit 232a6ebae419193f5b8da4fa869ae5089ab105c2
Author: Matthew Auld <matthew.auld@intel.com>
Date:   Tue Oct 8 17:01:14 2019 +0100

    drm/i915: introduce intel_memory_region

I'm keeping the priming patch locally so it wont get lost.

Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Tang, CQ" <cq.tang@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v5)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v6)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191105090148.30269-1-daniel.vetter@ffwll.ch
[mlankhorst: Fix commit typos pointed out by Michael Ruhl]

drm/i915/gt: Cleanup heartbeat systole first

Before we grab the engine wakeref, tidy up the previous heartbeat
request. If we then abort because the engine powerwell is off, we ensure
the request is freed as we know we will not have freed it when
cancelling the work (as the work is running!).

Fixes: 841e86728615 ("drm/i915/gt: Only drop heartbeat.systole if the sole owner")
References: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106223410.30334-1-chris@chris-wilson.co.uk

drm/i915: switch intel_ddi_init() to intel types

Prefer using intel_encoder and pass the base where needed rather than
keeping both encoder and intel_encoder variables around.

v2: actually add all changes to the patch

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106071715.10613-1-lucas.demarchi@intel.com

drm/i915/tgl: Add second TGL PCH ID

Another TGP ID has shown up, so let's add it to avoid South Display
breakage on systems that have this ID.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106005526.1500-1-james.ausmus@intel.com

drm/i915: Remove unwanted rcu_read_lock/unlock

We don't need rcu read side critical section to call pid_nr(),
remove it.

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172416.17188-1-chris@chris-wilson.co.uk

drm/i915/gem: Fix error path to unlock if the GEM context is closed

When inside the lock, remember to unlock even if you want to leave
early.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: a4e7ccdac38e ("drm/i915: Move context management under GEM")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106144155.25727-1-chris@chris-wilson.co.uk

drm/i915/gt: Only drop heartbeat.systole if the sole owner

Mika spotted that only using cancel_delayed_work() could mean that we
attempted to clear the heartbeat.systole while the worker was still
running. Rectify the situation by only touching the systole from outside
the worker if we suceeded in cancelling the worker before it could run.
The worker is expected to clean up by itself upon idling.

Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106133129.17732-1-chris@chris-wilson.co.uk

drm/i915/lmem: fixup fake lmem teardown

We should not be unconditionally calling release_fake_lmem_bar.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106123135.12441-1-matthew.auld@intel.com

drm/i915: Frob the correct crtc state in intel_crtc_disable_noatomic()

The uapi vs. hw state split introduced a bug in
intel_crtc_disable_noatomic() where it's now frobbing an already
freed temp crtc state instead of adjusting the crtc state we
are really left with. Fix that by making a cleaner separation
beteen the two.

This causes explosions on any machine that boots up with pipes
already running but not hooked up to any encoder (typical
behaviour for gen2-4 VBIOS).

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 58d124ea2739 ("drm/i915: Complete crtc hw/uapi split, v6.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191105171447.22111-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/gem: Early rejection of no-aperture map_ggtt

If the device does not have an aperture through which we can indirectly
access and detile the buffers, simply reject the ioctl. Later we can
extend the ioctl to support different modes, but as an extension the
user must opt in and explicitly control the mmap type (viz
MMAP_OFFSET_IOCTL).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191105145305.14314-1-chris@chris-wilson.co.uk

drm/i915/dsb: Remove PIN_MAPPABLE from the DSB object VMA

It sounds like the hardware only needs the DSB object to be in global GTT
and not in the mappable region.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017155810.21654-1-tvrtko.ursulin@linux.intel.com

drm/i915/dsc: rename functions for consistency

Use intel_dsc_ prefix. No functional changes.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-4-jani.nikula@intel.com

drm/i915/dsc: split out encoder specific parts from DSC compute params

Split out the DP specific parts, making it easier to add DSI specific
configuration. Also move the encoder specific parts towards the end, to
allow overriding generic configuration if needed. This also improves
clarity by making it clear the encoder independent configuration does
not depend on the encoder specific parts.

v2: Rebase

Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-3-jani.nikula@intel.com

drm/i915/dsc: clean up rc parameter table access

Use a simple pointer to the relevant element instead of duplicating the
array subscription. No functional changes.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-2-jani.nikula@intel.com

drm/i915/dsc: make parameter arrays const

No need for them to be mutable.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-1-jani.nikula@intel.com

drm/i915: update rawclk also on resume

Since CNP it's possible for rawclk to have two different values, 19.2
and 24 MHz. If the value indicated by SFUSE_STRAP register is different
from the power on default for PCH_RAWCLK_FREQ, we'll end up having a
mismatch between the rawclk hardware and software states after
suspend/resume. On previous platforms this used to work by accident,
because the power on defaults worked just fine.

Update the rawclk also on resume. The natural place to do this would be
intel_modeset_init_hw(), however VLV/CHV need it done before
intel_power_domains_init_hw(). Thus put it there even if it feels
slightly out of place.

v2: Call intel_update_rawclck() in intel_power_domains_init_hw() for all
    platforms (Ville).

Reported-by: Shawn Lee <shawn.c.lee@intel.com>
Cc: Shawn Lee <shawn.c.lee@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101142024.13877-1-jani.nikula@intel.com

drm/i915: avoid reading DP_TP_CTL twice

Just avoid the additional read in case DP_TP_CTL is enabled:
read it once and save the value.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030012448.14937-5-lucas.demarchi@intel.com

drm/i915/tgl: do not enable transcoder clock twice on MST

For MST on Tiger Lake there are different moments when we need to
configure the transcoder clock select. For the first link this is in step
7.a of the spec, before training the link.  For additional streams this
should be done as part of step 8.b after programming receiver VC Payload
ID.

Bspec: 49190

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030012448.14937-4-lucas.demarchi@intel.com

drm/i915: add wrappers to get intel connector state

Wrap drm_atomic_get_old_connector_state so we can get the
intel_digital_connector_state and make it easier to migrate to intel
types.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030012448.14937-3-lucas.demarchi@intel.com

drm/i915: Add for_each_new_intel_connector_in_state()

The same macro as for_each_new_connector_in_state() but it uses
intel/i915 types instead of the drm ones.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-11-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20191030012448.14937-2-lucas.demarchi@intel.com

drm/i915: Eliminate redundancy in intel_primary_plane_create()

Lots of redundant assignments inside intel_primary_plane_create().
Get rid of them.

v2: Rebase due to fp16 landing

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-8-ville.syrjala@linux.intel.com

drm/i915: Sort format arrays consistently

Let's try to keep the pixel format arrays somewhat sorted:
1. RGB before YUV
2. smaller bpp before larger bpp
3. X before A
4. RGB before BGR

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-7-ville.syrjala@linux.intel.com

drm/i915: Add 10bpc formats with alpha for icl+

ICL+ again supports alpha blending with 10bpc pixel formats.
Expose them.

v2: Add all the stuff I missed earlier!

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-6-ville.syrjala@linux.intel.com

drm/i915: Expose C8 on VLV/CHV sprite planes

VLV/CHV sprite planes also support the C8 format. Let's expose that.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-5-ville.syrjala@linux.intel.com

drm/i915: Add missing 10bpc formats for pipe B sprites on CHV

CHV pipe B sprites gained support for the 10bpc X/ARGB pixel formats.
On VLV and CHV pipe A/C these are only supported by the primary
plane. Add the require bits to expose the new formats.

v2: Reorder the formats for consistency

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-4-ville.syrjala@linux.intel.com

drm/i915: Expose alpha formats on VLV/CHV primary planes

Currently we expose VLV/CHV alpha blending only on the sprite
planes, but the primary planes can do it as well. Let's flip
it on.

v2: Rebase due to fp16 landing

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-3-ville.syrjala@linux.intel.com

drm/i915: Expose 10:10:10 XRGB formats on SNB-BDW sprites

SNB-BDW support 10:10:10 formats on the sprite planes. Let's expose
them.

v2: Rebase due to fp16 landing

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-2-ville.syrjala@linux.intel.com

drm/i915/execlists: Reset CSB pointers by mmio as well

Sometimes Icelake forgets to reset the CSB pointers on a GPU reset,
leading to it carry on updating the old tail of the buffer.

<0>[  618.138490] i915_sel-5636    3d..1 673425465us : trace_ports: vecs0: submit { 14de2:504, 0:0 }
<0>[  618.138490] i915_sel-5636    3.... 673425493us : intel_engine_reset: vecs0 flags=100
<0>[  618.138490] i915_sel-5636    3.... 673425493us : execlists_reset_prepare: vecs0: depth<-0
<0>[  618.138490] i915_sel-5636    3.... 673425493us : intel_engine_stop_cs: vecs0
<0>[  618.138490] i915_sel-5636    3.... 673425523us : __intel_gt_reset: engine_mask=40
<0>[  618.138490] i915_sel-5636    3.... 673425568us : execlists_reset: vecs0
<0>[  618.138490] i915_sel-5636    3d..1 673425568us : process_csb: vecs0 cs-irq head=1, tail=2
<0>[  618.138490] i915_sel-5636    3d..1 673425568us : process_csb: vecs0 csb[2]: status=0x00000001:0x40000000
<0>[  618.138490] i915_sel-5636    3d..1 673425569us : trace_ports: vecs0: promote { 14de2:504*, 0:0 }
<0>[  618.138490] i915_sel-5636    3d..1 673425570us : __i915_request_reset: vecs0 rq=14de2:504, guilty? yes
<0>[  618.138490] i915_sel-5636    3d..1 673425571us : __execlists_reset: vecs0 replay {head:2de0, tail:2e48}
<0>[  618.138490] i915_sel-5636    3d..1 673425572us : __i915_request_unsubmit: vecs0 fence 14de2:504, current 503
<0>[  618.138490] i915_sel-5636    3.... 673435544us : intel_engine_cancel_stop_cs: vecs0
<0>[  618.138490] i915_sel-5636    3.... 673435544us : process_csb: vecs0 cs-irq head=11, tail=11
<0>[  618.138490] i915_sel-5636    3d..1 673435545us : __i915_request_submit: vecs0 fence 14de2:504, current 503
<0>[  618.138490] i915_sel-5636    3d..1 673435546us : __execlists_submission_tasklet: vecs0: queue_priority_hint:-2147483648, submit:yes
<0>[  618.138490] i915_sel-5636    3d..1 673435548us : trace_ports: vecs0: submit { 14de2:504*, 0:0 }
<0>[  618.138490] i915_sel-5636    3.... 673435549us : execlists_reset_finish: vecs0: depth->0
<0>[  618.138490] ksoftirq-21      2..s. 673435592us : process_csb: vecs0 cs-irq head=11, tail=3
<0>[  618.138490] ksoftirq-21      2..s. 673435593us : process_csb: vecs0 csb[0]: status=0x00000001:0x40000000
<0>[  618.138490] ksoftirq-21      2..s. 673435594us : trace_ports: vecs0: promote { 14de2:504*, 0:0 }
<0>[  618.138490] ksoftirq-21      2..s. 673435596us : process_csb: vecs0 csb[1]: status=0x00000018:0x40000040
<0>[  618.138490] ksoftirq-21      2..s. 673435597us : trace_ports: vecs0: completed { 14de2:504*, 0:0 }
<0>[  618.138490] ksoftirq-21      2..s. 673435612us : process_csb: process_csb:2188 GEM_BUG_ON(!i915_request_completed(*execlists->active) && !reset_in_progress(execlists))

After the reset, we do another clflush before checking the CSB to be
sure we see whatever was left in the CSB prior to the reset. So it is
unlikely to be an incoherent view of the CSB, and more likely that
Icelake didn't reset its pointers.

References: 582a6f90aa0d ("drm/i915/execlists: Add a paranoid flush of the CSB pointers upon reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104135307.21083-1-chris@chris-wilson.co.uk

drm/i915: add for_each_port() and use it

Add another for_each style macro to the pile of custom looping macros.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101134333.11612-1-jani.nikula@intel.com

drm/i915: Protect request peeking with RCU

Since the execlists_active() is no longer protected by the
engine->active.lock, we need to protect the request pointer with RCU to
prevent it being freed as we evaluate whether or not we need to preempt.

Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Fixes: 13ed13a4dcbf ("drm/i915: Don't set queue_priority_hint if we don't kick the submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104090158.2959-2-chris@chris-wilson.co.uk

drm/i915/gt: Drop false assertion on user_forcewake

The counter is removed from the pm wakeref count, but it remains intact
so that we can restore it upon resume. Ergo inside suspend, it may have
a value.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104090158.2959-1-chris@chris-wilson.co.uk

drm/i915/execlists: Ignore the inactive kernel context in assert_pending_valid

Filter out warnings for the kernel context that is used to flush
inactive contexts, as they do no not pose a risk.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101082919.21122-1-chris@chris-wilson.co.uk

drm/i915/execlists: Verify context register state before execution

Check that the context's ring register state still matches our
expectations prior to execution.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191102125739.24626-1-chris@chris-wilson.co.uk

drm/i915/selftests: Flush all active callbacks

Flushing the outer i915_active is not enough, as we need the barrier to
be applied across all the active dma_fence callbacks. So we must
serialise with each outstanding fence.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112096
References: f79520bb3337 ("drm/i915/selftests: Synchronize checking active status with retirement")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101181022.25633-1-chris@chris-wilson.co.uk

drm/i915/perf: Reverse a ternary to make sparse happy

Avoid

drivers/gpu/drm/i915/i915_perf.c:2442:85: warning: dubious: x | !y

simply by inverting the predicate and reversing the ternary.

v2: Move the long lines into their own function so there is no confusion
on operator precedence.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101192116.12647-1-chris@chris-wilson.co.uk

drm/i915/selftests: Add intel_gt_suspend_prepare

Call suspend_prepare first so that we don't leave GuC so confused.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101174405.7389-1-chris@chris-wilson.co.uk

drm/i915: Defer rc6 shutdown to suspend_late

Currently we shutdown rc6 during i915_gem_resume() but this is called
during the preparation phase (i915_drm_prepare) for all suspend paths,
but we only want to shutdown rc6 for S3+. Move the actual shutdown to
i915_gem_suspend_late().

We then need to differentiate between suspend targets, to distinguish S0
(s2idle) where the device is kept awake but needs to be in a low power
mode (the same as runtime suspend) from the device suspend levels where
we lose control of HW and so must disable any HW access to dangling
memory.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111909
Fixes: c113236718e8 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/gem_exec_suspend/power-S0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-4-chris@chris-wilson.co.uk

drm/i915/gt: Move user_forcewake application to GT

We already track the debugfs user_forcewake on the GT, so it is natural
to pull the suspend/resume handling under gt/ as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-3-chris@chris-wilson.co.uk

drm/i915/gem: Leave reloading kernel context on resume to GT

As we already do reload the kernel context in intel_gt_resume, repeating
that action inside i915_gem_resume() as well is redundant.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-2-chris@chris-wilson.co.uk

drm/i915/gt: Call intel_gt_sanitize() directly

Assume all responsibility for operating on the HW to sanitize the GT
state upon load/resume in intel_gt_sanitize() itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-1-chris@chris-wilson.co.uk

drm/i915/gt: Pull timeline initialise to intel_gt_init_early

Our timelines are currently contained within an intel_gt, and we only
need to perform list/spinlock initialisation, so we can pull the
intel_timelines_init() into our intel_gt_init_early().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101130406.4142-1-chris@chris-wilson.co.uk

drm/i915: Remove special case slave handling during hw programming, v3.

Now that we split plane_state which I didn't want to do yet, we can
program the slave plane without requiring the master plane.

This is useful for programming bigjoiner slave planes as well. We
will no longer need the master's plane_state.

Changes since v1:
- set src/dst rectangles after copy_uapi_to_hw_state.
Changes since v2:
- Use the correct color_plane for pre-gen11 by using planar_linked_plane != NULL.
- Use drm_format_info_is_yuv_semiplanar in skl_plane_check() to fix gen11+.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-12-maarten.lankhorst@linux.intel.com

drm/i915: Complete plane hw and uapi split, v2.

Splitting plane state is easier than splitting crtc_state,
before plane check we copy the drm properties to hw so we can
do the same in bigjoiner later on.

We copy the state after we did all the modeset handling, but fortunately
i915 seems to be split correctly and nothing during modeset looks
at plane_state.

Changes since v1:
- Do not clear hw state on duplication.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-11-maarten.lankhorst@linux.intel.com

drm/i915: Perform automated conversions for plane uapi/hw split, base -> uapi.

Split up plane_state->base to uapi. This is done using the following patch,
ran after the previous commit that splits out any hw references:

@@
struct intel_plane_state *T;
identifier x;
@@
-T->base.x
+T->uapi.x

@@
struct intel_plane_state *T;
@@
-T->base
+T->uapi

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-10-maarten.lankhorst@linux.intel.com

drm/i915: Perform automated conversions for plane uapi/hw split, base -> hw.

Split up plane_state->base to hw. This is done using the following patch:

@@
struct intel_plane_state *T;
identifier x =~ "^(crtc|fb|alpha|pixel_blend_mode|rotation|color_encoding|color_range)$";
@@
-T->base.x
+T->hw.x

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-9-maarten.lankhorst@linux.intel.com

drm/i915: Perform manual conversions for plane uapi/hw split, v2.

get_crtc_from_states() is called before plane_state is copied to uapi,
so use the uapi state there.

intel_legacy_cursor_update() could probably get away with looking at
the hw state, but for clarity always look at the uapi state.

Changes since v1:
- Convert entirety of intel_legacy_cursor_update (Ville).

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-8-maarten.lankhorst@linux.intel.com

drm/i915: Add aliases for uapi and hw to plane_state

Prepare to split up hw and uapi machinally, by adding a uapi and
hw alias. We will remove the base in a bit. This is a split from the
original uapi/hw patch, which did it all in one go.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-7-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Complete crtc hw/uapi split, v6.

Now that we separated everything into uapi and hw, it's
time to make the split definitive. Remove the union and
make a copy of the hw state on modeset and fastset.

Color blobs are copied in crtc atomic_check(), right
before color management is checked.

Changes since v1:
- Copy all blobs immediately after drm_atomic_helper_check_modeset().
- Clear crtc_state->hw on disable, instead of using clear_intel_crtc_state().
Changes since v2:
- Use intel_crtc_free_hw_state + clear in intel_crtc_disable_noatomic().
- Make a intel_crtc_prepare_state() function that clears the crtc_state
  and copies hw members.
- Remove setting uapi.adjusted_mode, we now have a direct call to
  drm_calc_timestamping_constants().
Changes since v3:
- Rename prefix copy_hw_to_uapi_state() with intel_crtc.
- Copy color blobs to uapi as well.
- Add a intel_crtc_copy_uapi_to_hw_state_nomodeset() function for clarity.
Changes since v4:
- Copy hw.adjusted_mode back to uapi.adjusted_mode, to shut up
  the call to drm_calc_timestamping_constants() in
  drm_atomic_helper_update_legacy_modeset_state().
- Use drm_property_replace_blob (Ville).
Changes since v5:
- Use hw->mode in intel_modeset_readout_hw_state(). (Ville)
- Copy to uapi.mode using drm_atomic_set_mode_for_crtc(). (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-6-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Perform automated conversions for crtc uapi/hw split, base -> uapi.

Split up crtc_state->base to uapi. This is done using the following patch,
ran after the previous commit that splits out any hw references:

@@
struct intel_crtc_state *T;
@@
-T->base
+T->uapi

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-5-maarten.lankhorst@linux.intel.com

drm/i915: Perform automated conversions for crtc uapi/hw split, base -> hw.

Split up crtc_state->base to hw where appropriate. This is done using the following patch:

@@
struct intel_crtc_state *T;
identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$";
@@
-T->base.x
+T->hw.x

@@
struct drm_crtc_state *T;
identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$";
@@
-to_intel_crtc_state(T)->base.x
+to_intel_crtc_state(T)->hw.x

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-4-maarten.lankhorst@linux.intel.com

drm/i915: Perform manual conversions for crtc uapi/hw split, v2.

intel_get_load_detect_pipe() needs to set uapi active,
uapi enable is set by the call to drm_atomic_set_mode_for_crtc(),
so we can remove it.

intel_pipe_config_compare() needs to look at hw state, but I didn't
change spatch to look at it. It's easy enough to do manually.

intel_atomic_check() definitely needs to check for uapi enable,
otherwise intel_modeset_pipe_config cannot copy uapi state to hw.

Changes since v1:
- Actually set uapi.active in get_load_detect_pipe().

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-3-maarten.lankhorst@linux.intel.com

drm/i915: Add aliases for uapi and hw to crtc_state

Prepare to split up hw and uapi machinally, by adding a uapi and
hw alias. We will remove the base in a bit. This is a split from the
original uapi/hw patch, which did it all in one go.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Handle a few more cases for crtc hw/uapi split, v3.

We are still looking at drm_crtc_state in a few places, convert those
to use intel_crtc_state instead.

Changes since v1:
- Move to before uapi/hw split.
- Add hunks for intel_pm.c as well.
Changes since v2:
- Incorporate Ville's feedback.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-1-maarten.lankhorst@linux.intel.com

drm/i915/selftests: Spin on all engines simultaneously

Vanshidhar Konda asked for the simplest test "to verify that the kernel
can submit and hardware can execute batch buffers on all the command
streamers in parallel." We have a number of tests in userspace that
submit load to each engine and verify that it is present, but strictly
we have no selftest to prove that the kernel can _simultaneously_
execute on all known engines. (We have tests to demonstrate that we can
submit to HW in parallel, but we don't insist that they execute in
parallel.)

v2: Improve the igt_spinner support for older gen.

Suggested-by: Vanshidhar Konda <vanshidhar.r.konda@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Vanshidhar Konda <vanshidhar.r.konda@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Vanshidhar Konda <vanshidhar.r.konda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101101528.10553-1-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20191101

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/selftests: Start kthreads before stopping

An interesting observation made with our parallel selftests was that on
our small/single cpu systems we would call kthread_stop() before the
kthreads were spawned. If this happens, the kthread is never run at all;
completely bypassing the test.

A simple yield() from the parent will ensure that all children have the
opportunity to start before we reap them.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101084940.31838-1-chris@chris-wilson.co.uk

drm/i915/lmem: Check against i915_selftest only under CONFIG_SELFTEST

The i915_selftest module parameters only exist when
CONFIG_DRM_I915_SELFTEST is set.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101095147.9769-1-chris@chris-wilson.co.uk

drm/i915/gem: Refine occupancy test in kill_context()

Don't just look at the very last request in a queue when deciding if we
need to evict the context from the GPU, as that request may still be in
the submission queue while the rest of the context is running!

Instead, walk back along the queued requests looking for the active
request and checking that.

Fixes: 2e0986a58cc4 ("drm/i915/gem: Cancel contexts when hangchecking is disabled")
Testcase: igt/gem_ctx_persistence/queued
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031090104.22245-1-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20191101

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/lmem: add the fake lmem region

Intended for upstream testing so that we can still exercise the LMEM
plumbing and !i915_ggtt_has_aperture paths. Smoke tested on Skull Canyon
device. This works by allocating an intel_memory_region for a reserved
portion of system memory, which we treat like LMEM. For the LMEMBAR we
steal the aperture and 1:1 it map to the stolen region.

To enable simply set the i915 modparam fake_lmem_start= on the kernel
cmdline with the start of reserved region(see memmap=). The size of the
region we can use is determined by the size of the mappable aperture, so
the size of reserved region should be >= mappable_end. For now we only
enable for the selftests. Depends on CONFIG_DRM_I915_UNSTABLE being
enabled.

eg. memmap=2G$16G i915.fake_lmem_start=0x400000000

v2: make fake_lmem_start an i915 modparam

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030173320.8850-1-matthew.auld@intel.com

drm/i915/dp: Do not switch aux to TBT mode for non-TC ports

Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was
switching aux to TBT mode for all combo-phy ports, happily this did
not caused any issue but is better follow BSpec.
Also this is reserved bit before ICL.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: e9b7e1422d40 ("drm/i915: Sanitize the terminology used for TypeC port modes")
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029011014.286885-1-jose.souza@intel.com

drm/i915/guc: drop guc shared area

Recent GuC doesn't require the shared area. We still have one user in
i915 (engine reset via guc) because we haven't updated the command to
match the current guc submission flow [1]. Since the flow in guc is
about to change again, just disable the command for now and add a note
that we'll implement it as part of the new flow.

[1] https://patchwork.freedesktop.org/patch/295038/

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031013040.25803-2-daniele.ceraolospurio@intel.com

drm/i915: drop lrc header page

Recent GuC binaries (including all the ones we're currently using)
don't require this shared area anymore, having moved the relevant
entries into the stage pool instead. i915 itself doesn't write
anything into it either, so we can safely drop it.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031013040.25803-1-daniele.ceraolospurio@intel.com

drm/i915: Split detaching and removing the vma

In order to keep the assert_bind_count() valid, we need to hold the vma
page reference until after we drop the bind count. However, we must also
keep the drm_mm_remove_node() as the last action of i915_vma_unbind() so
that it serialises with the unlocked check inside i915_vma_destroy(). So
we need to split up i915_vma_remove() so that we order the detach, drop
pages and remove as required during unbind.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112067
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030192159.18404-1-chris@chris-wilson.co.uk

drm/i915/selftests: Pretty print the i915_active

If the idle_pulse fails to flush the i915_active, dump the tree to see
if that has any clues.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031101116.19894-1-chris@chris-wilson.co.uk

drm/i915/selftests: Assert that the idle_pulse is sent

When checking the heartbeat pulse, we expect it to have been sent by the
time we have slept. We can verify this by checking the engine serial
number to see if that matches the predicted pulse serial. It will always
be true if, and only if, the pulse was sent by itself (as designed by
the test).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031094259.23028-1-chris@chris-wilson.co.uk

drm/i915/mst: Document the userspace fail with possible_crtcs

To avoid accidentally breaking things in the future add a
comment explaining why we misconfigure the pipe_mask.

Also toss in a TODO for investigating a single encoder
approach as opposed to the encoder-per-pipe approach.

v2: Drop a bogus TODO comment

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-6-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915: Simplify pipe_mask setup even further

Just set pipe_mask=~0 for the non-special cases where any pipe
will do. intel_encoder_possible_crtcs() will anyway drop out
anything that doesn't exist.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-5-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915: Allow ICL+ DSI on any pipe

There are no longer any pipe<->DSI port limitations on icl+.
Populate the pipe_mask accordingly.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-4-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915: s/crtc_mask/pipe_mask/

Rename the encoder->crtc_mask to encoder->pipe_mask to better
reflect what it actually contains.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-3-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915: Simplify LVDS crtc_mask setup

We don't need to special case PCH vs. gen4 when setting up the LVDS
crtc_mask. Just claim pipes A|B|C work and
intel_encoder_possible_crtcs() will drop out any crtc that doesn't
exist.

v2: Put the special case first to match what most other encoders do

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915/uc: define GuC and HuC binaries for TGL

GuC 35.2.0 and HuC 7.0.3 are the first production releases for TGL.
GuC 35.2 for Gen12 is interface-compatible with 33.0 on older Gens,
because the differences are related to additional blocks/commands in
the interface to support new Gen12 features. These parts of the
interface will be added when the relevant features are enabled.

v2: fix typos (Michal)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191026003507.21769-1-daniele.ceraolospurio@intel.com

drm/i915: Stop frobbing crtc->base.mode

The core no longer uses drm_crtc_state::mode with atomic drivers,
so let's stop frobbing it in the driver. For the user mode readout
we'll just use an on stack mode.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029145526.10308-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Nuke 'mode' argument to intel_get_load_detect_pipe()

We always pass mode==NULL to intel_get_load_detect_pipe(). Remove
the pointless function argument.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029132323.18113-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>