Ville Syrjälä [Thu, 27 Apr 2017 16:02:25 +0000 (19:02 +0300)]
drm/i915: Remove hdmi_connected from LPE audio pdata
We can determine that the pipe was shut down from pipe<0, so there's
no point in duplicating that information as 'hdmi_connected'.
v2: Use pipe<0 instead of port<0 as we'll want to do per-port
PCM devices later
Initialize pipe to -1 to inidicate inactive initial state
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-7-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Ville Syrjälä [Thu, 27 Apr 2017 16:02:24 +0000 (19:02 +0300)]
drm/i915: Replace tmds_clock_speed and link_rate with just ls_clock
There's no need to distinguish between the DP link rate and HDMI TMDS
clock for the purposes of the LPE audio. Both are actually the same
thing more or less, which is the link symbol clock. So let's just
call the thing ls_clock and simplify the code.
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-6-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Ville Syrjälä [Thu, 27 Apr 2017 16:02:23 +0000 (19:02 +0300)]
drm/i915: Remove the unused pending_notify from LPE platform data
The pending_notify flag in the LPE audio platform data is pointless,
actually unused. So let's kill it off.
v2: Fix typo in patch subject
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-5-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Ville Syrjälä [Thu, 27 Apr 2017 16:02:22 +0000 (19:02 +0300)]
drm/i915: Stop pretending to mask/unmask LPE audio interrupts
vlv_display_irq_postinstall() enables the LPE audio interrupts
regardless of whether the LPE audio irq chip has masked/unmasked
them. Also the irqchip masking/unmasking doesn't consider the state
of the display power well or the device, and hence just leads to
dmesg spew when it tries to access the hardware while it's powered
down.
If the current way works, then we don't need to do anything in the
mask/unmask hooks. If it doesn't work, well, then we'd need to properly
track whether the irqchip has masked/unmasked the interrupts when
we enable display interrupts. And the mask/unmask hooks would need
to check whether display interrupts are even enabled before frobbing
with he registers.
So let's just assume the current way works and neuter the mask/unmask
hooks. Also clean up vlv_display_irq_postinstall() a bit and stop
it from trying to unmask/enable the LPE C interrupt on VLV since it
doesn't exist.
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-4-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Ville Syrjälä [Thu, 27 Apr 2017 16:02:21 +0000 (19:02 +0300)]
ALSA: x86: Clear the pdata.notify_lpe_audio pointer before teardown
Clear the notify function pointer in the platform data before we tear
down the driver. Otherwise i915 would end up calling a stale function
pointer and possibly explode.
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-3-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Ville Syrjälä [Thu, 27 Apr 2017 16:02:20 +0000 (19:02 +0300)]
drm/i915: Fix runtime PM for LPE audio
Not calling pm_runtime_enable() means that runtime PM can't be
enabled at all via sysfs. So we definitely need to call it
from somewhere.
Calling it from the driver seems like a bad idea because it
would have to be paired with a pm_runtime_disable() at driver
unload time, otherwise the core gets upset. Also if there's
no LPE audio driver loaded then we couldn't runtime suspend
i915 either.
So it looks like a better plan is to call it from i915 when
we register the platform device. That seems to match how
pci generally does things. I cargo culted the
pm_runtime_forbid() and pm_runtime_set_active() calls from
pci as well.
The exposed runtime PM API is massive an thorougly misleading, so
I don't actually know if this is how you're supposed to use the API
or not. But it seems to work. I can now runtime suspend i915 again
with or without the LPE audio driver loaded, and reloading the
LPE audio driver also seems to work.
Note that powertop won't auto-tune runtime PM for platform devices,
which is a little annoying. So I'm not sure that leaving runtime
PM in "on" mode by default is the best choice here. But I've left
it like that for now at least.
Also remove the comment about there not being much benefit from
LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime
PM, which will also block s0ix, and that could have a measurable
impact on power consumption.
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes:
0b6b524f3915 ("ALSA: x86: Don't enable runtime PM as default")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-2-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Chris Wilson [Wed, 3 May 2017 09:39:24 +0000 (10:39 +0100)]
drm/i915: Switch the global i915.semaphores check to a local predicate
Rather than use a global modparam, we can just check to see if the
engine has semaphores configured upon it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-7-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 May 2017 09:39:23 +0000 (10:39 +0100)]
drm/i915: Do not record a successful syncpoint for a dma-await
As we may unwind the requests, even though the request we are awaiting
has a global_seqno that seqno may be revoked during the await and so we
can not reliably use it as a barrier for all future awaits on the same
timeline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-6-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 May 2017 09:39:22 +0000 (10:39 +0100)]
drm/i915: Rename intel_timeline.sync_seqno[] to .global_sync[]
With the addition of the inter-context intel_time.sync map, having a
very similar sync_seqno[] is confusing. Aide the reader by denoting that
this is a pre-allocated array for storing semaphore sync points wrt to
the global seqno.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-5-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 May 2017 09:39:21 +0000 (10:39 +0100)]
drm/i915: Squash repeated awaits on the same fence
Track the latest fence waited upon on each context, and only add a new
asynchronous wait if the new fence is more recent than the recorded
fence for that context. This requires us to filter out unordered
timelines, which are noted by DMA_FENCE_NO_CONTEXT. However, in the
absence of a universal identifier, we have to use our own
i915->mm.unordered_timeline token.
v2: Throw around the debug crutches
v3: Inline the likely case of the pre-allocation cache being full.
v4: Drop the pre-allocation support, we can lose the most recent fence
in case of allocation failure -- it just means we may emit more awaits
than strictly necessary but will not break.
v5: Trim allocation size for leaf nodes, they only need an array of u32
not pointers.
v6: Create mock_timeline to tidy selftest writing
v7: s/intel_timeline_sync_get/intel_timeline_sync_is_later/ (Tvrtko)
v8: Prune the stale sync points when we idle.
v9: Include a small benchmark in the kselftests
v10: Separate the idr implementation into its own compartment. (Tvrkto)
v11: Refactor igt_sync kselftests to avoid deep nesting (Tvrkto)
v12: __sync_leaf_idx() to assert that p->height is 0 when checking leaves
v13: kselftests to investigate struct i915_syncmap itself (Tvrtko)
v14: Foray into ascii art graphs
v15: Take into account that the random lookup/insert does 2 prng calls,
not 1, when benchmarking, and use for_each_set_bit() (Tvrtko)
v16: Improved ascii art
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-4-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 May 2017 09:39:20 +0000 (10:39 +0100)]
drm/i915: Lift timeline ordering to await_dma_fence
Currently we filter out repeated use of the same timeline in the low
level i915_gem_request_await_request(), after having added the
dependency on the old request. However, we can lift this to
i915_gem_request_await_dma_fence() (before the dependency is added)
using the observation that requests along the same timeline are
explicitly ordered via i915_add_request (along with the dependencies).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-3-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 May 2017 09:39:19 +0000 (10:39 +0100)]
drm/i915: Unwrap top level fence-array
By first unwrapping an incoming fence-array into its child fences, we
can simplify the internal branching, and so avoid triggering a potential
bug in the next patch when not squashing the child fences on the same
timeline.
It will also have the advantage of keeping the (top-level) fence arrays
out of any fence/timeline caching since these are unordered timelines
but with a random context id.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 May 2017 09:39:18 +0000 (10:39 +0100)]
drm/i915: Mark up clflushes as belonging to an unordered timeline
2 clflushes on two different objects are not ordered, and so do not
belong to the same timeline (context). Either we use a unique context
for each, or we reserve a special global context to mean unordered.
Ideally, we would reserve 0 to mean unordered (DMA_FENCE_NO_CONTEXT) to
have the same semantics everywhere.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-1-chris@chris-wilson.co.uk
Mika Kuoppala [Tue, 2 May 2017 14:03:44 +0000 (17:03 +0300)]
drm/i915: Use wait_for_atomic_us when waiting for gt fifo
Replace the handcrafter loop when checking for fifo slots
with atomic wait for. This brings this wait in line with
the other waits on register access. We also get a readable
timeout constraint, so make it to fail after 10ms.
Chris suggested that we should fail silently as the fifo debug
handler, now attached to unclaimed mmio handling, will take care of the
possible errors at later stage.
Note that the decision to wait was changed so that we avoid
allocating the first reserved entry. Nor do we reduce the count
if we fail the wait, removing the possiblity to wrap the
count if the hw fifo returned zero.
v2: remove unclaimed check on timeout (Chris)
v3: use void return (Chris)
References: https://bugs.freedesktop.org/show_bug.cgi?id=100247
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1491493182-31540-1-git-send-email-mika.kuoppala@intel.com
Mika Kuoppala [Thu, 6 Apr 2017 15:39:42 +0000 (18:39 +0300)]
drm/i915: Move the GTFIFODBG to the common mmio dbg framework
Remove the per-mmio checking of the FIFO debug register into the common
conditional mmio debug handling. Based on patch from Chris Wilson.
v2: postpone warn on fifodbg for unclaimed reg debugs
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Michal Wajdeczko [Tue, 2 May 2017 10:32:42 +0000 (10:32 +0000)]
drm/i915/guc: Enable send function only after successful init
It is safer to setup valid send function after successful GuC
hardware initialization. In addition we prepare placeholder
where we can setup any alternate GuC communication mechanism.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170502103243.54940-1-michal.wajdeczko@intel.com
[ickle: Fixup ENODEV for an impossible error path]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Joonas Lahtinen [Fri, 28 Apr 2017 07:58:39 +0000 (10:58 +0300)]
drm/i915: Do not leak dev_priv->l3_parity.remap_info[]
Add intel_irq_fini() for placing the deinitialization code,
starting with freeing dev_priv->l3_parity.remap_info[].
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1493366319-18515-1-git-send-email-joonas.lahtinen@linux.intel.com
Daniel Vetter [Tue, 2 May 2017 07:29:47 +0000 (09:29 +0200)]
drm/i915: Update DRIVER_DATE to
20170502
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ander Conselvan de Oliveira [Fri, 28 Apr 2017 08:02:22 +0000 (11:02 +0300)]
drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
The sequence in glk_dsi_device_ready() enters ULPS then waits until it is
*not* active to then disable it. The correct sequence according to the
spec is to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE bit is
zero, i.e., ULPS is active, and then disable ULPS.
Fixing the condition gets rid of the following spurious error messages:
[drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active
Fixes:
4644848369c0 ("drm/i915/glk: Add MIPIIO Enable/disable sequence")
Cc: Deepak M <m.deepak@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170428080222.6147-1-ander.conselvan.de.oliveira@intel.com
Joonas Lahtinen [Fri, 28 Apr 2017 07:53:39 +0000 (10:53 +0300)]
drm/i915: Capture CCID on ILK
CCID register existed already on ILK according to the PRM (Chris
verified the address to match too).
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1493366019-18380-1-git-send-email-joonas.lahtinen@linux.intel.com
Joonas Lahtinen [Fri, 28 Apr 2017 07:53:38 +0000 (10:53 +0300)]
drm/i915: Reset ILK during GEM sanitization
ILK should survive a reset without display corruption.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Joonas Lahtinen [Fri, 28 Apr 2017 07:53:37 +0000 (10:53 +0300)]
drm/i915: Eliminate HAS_HW_CONTEXTS
HAS_HW_CONTEXTS is misleading condition for GPU reset and CCID,
replace it with Gen specific (to be updated in next patches).
HAS_HW_CONTEXTS in i915_l3_write is bogus because each HAS_L3_DPF
match also has .has_hw_contexts = 1 set.
This leads to us being able to get rid of the property completely.
v2:
- Keep the checks at Gen6 for no functional change (Ville)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Joonas Lahtinen [Fri, 28 Apr 2017 07:53:36 +0000 (10:53 +0300)]
drm/i915: Sanitize engine context sizes
Pre-calculate engine context size based on engine class and device
generation and store it in the engine instance.
v2:
- Squash and get rid of hw_context_size (Chris)
v3:
- Move after MMIO init for probing on Gen7 and 8 (Chris)
- Retained rounding (Tvrtko)
v4:
- Rebase for deferred legacy context allocation
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tvrtko Ursulin [Wed, 12 Apr 2017 15:48:42 +0000 (16:48 +0100)]
drm/i915/guc: Fix sleep under spinlock during reset
Looks like intel_guc_reset had the ability to sleep under the
uncore spinlock since forever but it wasn't detected until the
recent changes annotated the wait for register with might_sleep.
I have fixed it by removing holding of the uncore spinlock over
the call to gen6_hw_domain_reset, since I do not see that is
really needed. But there is always a possibility I am missing
some nasty detail so please double check.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 27 Apr 2017 10:46:51 +0000 (11:46 +0100)]
drm/i915: Defer context state allocation for legacy ring submission
Almost from the outset for execlists, we used deferred allocation of the
logical context and rings. Then we ported the infrastructure for pinning
contexts back to legacy, and so now we are able to also implement
deferred allocation for context objects prior to first use on the legacy
submission.
v2: We still need to differentiate between legacy engines, Joonas is
fixing that but I want this first ;) (Joonas)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427104651.22394-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Michel Thierry [Tue, 18 Apr 2017 20:23:17 +0000 (13:23 -0700)]
drm/i915: Rename gen8_(un)request_engine_reset to gen8_reset_engine_start/cancel
As all other functions related to resetting engines are using
reset_engine.
v2: remove _request_ and use start/cancel instead (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170418202335.35232-3-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Michel Thierry [Tue, 18 Apr 2017 20:23:16 +0000 (13:23 -0700)]
drm/i915: Fix stale comment about I915_RESET_IN_PROGRESS flag
It has been replaced by I915_RESET_BACKOFF / I915_RESET_HANDOFF.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170418202335.35232-2-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Ander Conselvan de Oliveira [Mon, 24 Apr 2017 10:47:18 +0000 (13:47 +0300)]
drm/i915/glk: Don't allow 12 bpc when htotal is too big
Display workaround #1139 for Geminilake instructs us to restrict HDMI
to 8 bpc when htotal is greater than 5460. Otherwise, the pipe is unable
to generate a proper signal and is left in a state where corruption is
seen with other modes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100440
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170424104718.26448-1-ander.conselvan.de.oliveira@intel.com
Chris Wilson [Wed, 26 Apr 2017 08:06:59 +0000 (09:06 +0100)]
drm/i915: Skip waking the signaler when enabling before request submission
If we are enabling the breadcrumbs signaling prior to submitting the
request, we know that we cannot have missed the interrupt and can
therefore skip immediately waking the signaler to check.
This reduces a significant chunk of the __i915_gem_request_submit()
overhead for inter-engine synchronisation, for example in gem_exec_whisper.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170426080659.28771-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Sun, 23 Apr 2017 17:06:17 +0000 (18:06 +0100)]
drm/i915: Poison the request before emitting commands
If we poison the request before we emit commands, it should be easier to
spot when we execute an uninitialised request.
References: https://bugs.freedesktop.org/show_bug.cgi?id=100144
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170423170619.7156-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Chris Wilson [Tue, 25 Apr 2017 13:00:49 +0000 (14:00 +0100)]
drm/i915: Differentiate between sw write location into ring and last hw read
We need to keep track of the last location we ask the hw to read up to
(RING_TAIL) separately from our last write location into the ring, so
that in the event of a GPU reset we do not tell the HW to proceed into
a partially written request (which can happen if that request is waiting
for an external signal before being executed).
v2: Refactor intel_ring_reset() (Mika)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100144
Testcase: igt/gem_exec_fence/await-hang
Fixes:
821ed7df6e2a ("drm/i915: Update reset path to fix incomplete requests")
Fixes:
d55ac5bf97c6 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170425130049.26147-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Chris Wilson [Tue, 25 Apr 2017 10:38:35 +0000 (11:38 +0100)]
drm/i915: Report request restarts for both execlists/guc
As we now share the execlist_port[] tracking for both execlists/guc, we
can reset the inflight count on both and report which requests are being
restarted.
Suggested-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170425103835.31871-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Sun, 23 Apr 2017 17:06:19 +0000 (18:06 +0100)]
drm/i915: Include interesting seqno in the missed breadcrumb debug
Knowing the neighbouring seqno (current on hw, last submitted to hw)
provide some useful breadcrumbs to the debug log.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170423170619.7156-4-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Chris Wilson [Sat, 22 Apr 2017 08:15:37 +0000 (09:15 +0100)]
drm/i915: Confirm the request is still active before adding it to the await
Although we do check the completion-status of the request before
actually adding a wait on it (either to its submit fence or its
completion dma-fence), we currently do not check before adding it to the
dependency lists.
In fact, without checking for a completed request we may try to use the
signaler after it has been retired and its dependency tree freed:
[ 60.044057] BUG: KASAN: use-after-free in __list_add_valid+0x1d/0xd0 at addr
ffff880348c9e6a0
[ 60.044118] Read of size 8 by task gem_exec_fence/530
[ 60.044164] CPU: 1 PID: 530 Comm: gem_exec_fence Tainted: G E 4.11.0-rc7+ #46
[ 60.044226] Hardware name: ��������������������������������� ���������������������������������/���������������������������������, BIOS RYBDWi35.86A.0246.2
[ 60.044290] Call Trace:
[ 60.044337] dump_stack+0x4d/0x6a
[ 60.044383] kasan_object_err+0x21/0x70
[ 60.044435] kasan_report+0x225/0x4e0
[ 60.044488] ? __list_add_valid+0x1d/0xd0
[ 60.044534] ? kasan_kmalloc+0xad/0xe0
[ 60.044587] __asan_load8+0x5e/0x70
[ 60.044639] __list_add_valid+0x1d/0xd0
[ 60.044788] __i915_priotree_add_dependency+0x67/0x130 [i915]
[ 60.044895] i915_gem_request_await_request+0xa8/0x370 [i915]
[ 60.044974] i915_gem_request_await_dma_fence+0x129/0x140 [i915]
[ 60.045049] i915_gem_do_execbuffer.isra.37+0xb0a/0x26b0 [i915]
[ 60.045077] ? save_stack+0xb1/0xd0
[ 60.045105] ? save_stack_trace+0x1b/0x20
[ 60.045132] ? save_stack+0x46/0xd0
[ 60.045158] ? kasan_kmalloc+0xad/0xe0
[ 60.045184] ? __kmalloc+0xd8/0x670
[ 60.045229] ? drm_ioctl+0x359/0x640 [drm]
[ 60.045256] ? SyS_ioctl+0x41/0x70
[ 60.045330] ? i915_vma_move_to_active+0x540/0x540 [i915]
[ 60.045360] ? tty_insert_flip_string_flags+0xa1/0xf0
[ 60.045387] ? tty_flip_buffer_push+0x63/0x70
[ 60.045414] ? remove_wait_queue+0xa9/0xc0
[ 60.045441] ? kasan_unpoison_shadow+0x35/0x50
[ 60.045467] ? kasan_kmalloc+0xad/0xe0
[ 60.045494] ? kasan_check_write+0x14/0x20
[ 60.045568] i915_gem_execbuffer2+0xdb/0x2a0 [i915]
[ 60.045616] drm_ioctl+0x359/0x640 [drm]
[ 60.045705] ? i915_gem_execbuffer+0x5a0/0x5a0 [i915]
[ 60.045751] ? drm_version+0x150/0x150 [drm]
[ 60.045778] ? compat_start_thread+0x60/0x60
[ 60.045805] ? plist_del+0xda/0x1a0
[ 60.045833] do_vfs_ioctl+0x12e/0x910
[ 60.045860] ? ioctl_preallocate+0x130/0x130
[ 60.045886] ? pci_mmcfg_check_reserved+0xc0/0xc0
[ 60.045913] ? vfs_write+0x196/0x240
[ 60.045939] ? __fget_light+0xa7/0xc0
[ 60.045965] SyS_ioctl+0x41/0x70
[ 60.045991] entry_SYSCALL_64_fastpath+0x17/0x98
[ 60.046017] RIP: 0033:0x7feb2baefc47
[ 60.046042] RSP: 002b:
00007fff56d28e58 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 60.046075] RAX:
ffffffffffffffda RBX:
00007fff56d290a8 RCX:
00007feb2baefc47
[ 60.046102] RDX:
00007fff56d29050 RSI:
00000000c0406469 RDI:
0000000000000003
[ 60.046129] RBP:
00007fff56d29050 R08:
000055ecc4cd27d0 R09:
00007feb2bda8600
[ 60.046154] R10:
0000000000000073 R11:
0000000000000246 R12:
00000000c0406469
[ 60.046177] R13:
0000000000000003 R14:
000000000000000f R15:
0000000000000099
[ 60.046203] Object at
ffff880348c9e680, in cache i915_dependency size: 64
[ 60.046225] Allocated:
[ 60.046246] PID = 530
[ 60.046269] save_stack_trace+0x1b/0x20
[ 60.046292] save_stack+0x46/0xd0
[ 60.046318] kasan_kmalloc+0xad/0xe0
[ 60.046343] kasan_slab_alloc+0x12/0x20
[ 60.046368] kmem_cache_alloc+0xab/0x650
[ 60.046445] i915_gem_request_await_request+0x88/0x370 [i915]
[ 60.046559] i915_gem_request_await_dma_fence+0x129/0x140 [i915]
[ 60.046705] i915_gem_do_execbuffer.isra.37+0xb0a/0x26b0 [i915]
[ 60.046849] i915_gem_execbuffer2+0xdb/0x2a0 [i915]
[ 60.046936] drm_ioctl+0x359/0x640 [drm]
[ 60.046987] do_vfs_ioctl+0x12e/0x910
[ 60.047038] SyS_ioctl+0x41/0x70
[ 60.047090] entry_SYSCALL_64_fastpath+0x17/0x98
[ 60.047139] Freed:
[ 60.047179] PID = 530
[ 60.047223] save_stack_trace+0x1b/0x20
[ 60.047269] save_stack+0x46/0xd0
[ 60.047317] kasan_slab_free+0x72/0xc0
[ 60.047366] kmem_cache_free+0x39/0x160
[ 60.047512] i915_gem_request_retire+0x83f/0x930 [i915]
[ 60.047657] i915_gem_request_alloc+0x166/0x600 [i915]
[ 60.047799] i915_gem_do_execbuffer.isra.37+0xad8/0x26b0 [i915]
[ 60.047897] i915_gem_execbuffer2+0xdb/0x2a0 [i915]
[ 60.047942] drm_ioctl+0x359/0x640 [drm]
[ 60.047968] do_vfs_ioctl+0x12e/0x910
[ 60.047993] SyS_ioctl+0x41/0x70
[ 60.048019] entry_SYSCALL_64_fastpath+0x17/0x98
[ 60.048044] Memory state around the buggy address:
[ 60.048066]
ffff880348c9e580: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ 60.048105]
ffff880348c9e600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ 60.048138] >
ffff880348c9e680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 60.048170] ^
[ 60.048191]
ffff880348c9e700: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ 60.048225]
ffff880348c9e780: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
Note to hit the use-after-free requires us to be passed back a request
via a fence-array, that is from explicit fencing accumulated into a
sync-file fence-array.
Fixes:
52e542090701 ("drm/i915/scheduler: Record all dependencies upon request construction")
Testcase: igt/gem_exec_fence/expired-history
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170422081537.6468-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 21 Apr 2017 13:58:15 +0000 (14:58 +0100)]
drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio
The busy-spin, as the first stage of intel_wait_for_register(), is
currently under suspicion for causing:
[ 62.034926] NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
[ 62.034928] Modules linked in: i2c_dev i915 intel_gtt drm_kms_helper prime_numbers
[ 62.034932] CPU: 1 PID: 183 Comm: kworker/1:2 Not tainted 4.11.0-rc7+ #471
[ 62.034933] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[ 62.034934] Workqueue: pm pm_runtime_work
[ 62.034936] task:
ffff880275a04ec0 task.stack:
ffffc900002d8000
[ 62.034936] RIP: 0010:__intel_wait_for_register_fw+0x77/0x1a0 [i915]
[ 62.034937] RSP: 0018:
ffffc900002dbc38 EFLAGS:
00000082
[ 62.034939] RAX:
ffffc90003530094 RBX:
0000000000130094 RCX:
0000000000000001
[ 62.034940] RDX:
00000000000000a1 RSI:
ffff88027fd15e58 RDI:
0000000000000000
[ 62.034941] RBP:
ffffc900002dbc78 R08:
0000000000000002 R09:
0000000000000000
[ 62.034942] R10:
ffffc900002dbc18 R11:
ffff880276429dd0 R12:
ffff8802707c0000
[ 62.034943] R13:
00000000000000a0 R14:
0000000000000000 R15:
00000000fffefc10
[ 62.034945] FS:
0000000000000000(0000) GS:
ffff88027fd00000(0000) knlGS:
0000000000000000
[ 62.034945] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 62.034947] CR2:
00007ffd3cd98ff8 CR3:
0000000274c19000 CR4:
00000000001006e0
[ 62.034947] Call Trace:
[ 62.034948] intel_wait_for_register+0x77/0x140 [i915]
[ 62.034949] vlv_suspend_complete+0x23/0x5b0 [i915]
[ 62.034950] intel_runtime_suspend+0x16c/0x2a0 [i915]
[ 62.034950] pci_pm_runtime_suspend+0x50/0x180
[ 62.034951] ? pci_pm_runtime_resume+0xa0/0xa0
[ 62.034952] __rpm_callback+0xc5/0x210
[ 62.034953] rpm_callback+0x1f/0x80
[ 62.034953] ? pci_pm_runtime_resume+0xa0/0xa0
[ 62.034954] rpm_suspend+0x118/0x580
[ 62.034955] pm_runtime_work+0x64/0x90
[ 62.034956] process_one_work+0x1bb/0x3e0
[ 62.034956] worker_thread+0x46/0x4f0
[ 62.034957] ? __schedule+0x18b/0x610
[ 62.034958] kthread+0xff/0x140
[ 62.034958] ? process_one_work+0x3e0/0x3e0
[ 62.034959] ? kthread_create_on_node+
and related hard lockups in CI for byt and bsw.
Note this effectively reverts commits
41ce405e6894 and
b27366958869
("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()")
v2: Convert bool allow into a u32 mask for clarity and repeat the
comment on vlv rc6 timing to justify the 3ms timeout used for the wait (Ville)
Fixes:
41ce405e6894 ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()")
Fixes:
b27366958869 ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100718
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170421135815.11897-1-chris@chris-wilson.co.uk
Tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Chris Wilson [Fri, 21 Apr 2017 08:31:13 +0000 (09:31 +0100)]
drm/i915: Stop touching hangcheck.seqno from intel_engine_init_global_seqno()
The hangcheck runs independently to the main flow of seqno through the
driver. However, we have an odd coupling of the seqno reset that is
unwelcome, and if poked at just the right rate can cause spurious hangs
(e.g. gem_exec_whisper) on an apparently idle engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170421083113.21321-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 20 Apr 2017 10:17:09 +0000 (11:17 +0100)]
drm/i915: Use discardable buffers for rings
The contents of a ring are only valid between HEAD and TAIL, when the
ring is idle (HEAD == TAIL) we can simply let the pages go under memory
pressure if they are not pinned by an active context. Any new content
will be written after HEAD and so the ring will again be valid between
HEAD and TAIL, everything outside can be discarded.
Note that we take care of ensuring that we do not reset the HEAD
backwards following a GPU hang on an idle ring.
The same precautions are what enable us to use stolen memory for rings.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170420101709.27250-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 19 Apr 2017 09:41:17 +0000 (10:41 +0100)]
drm/i915/selftests: Allocate inode/file dynamically
Avoid having too large a stack by creating the fake struct inode/file on
the heap instead.
drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file':
drivers/gpu/drm/i915/selftests/mock_drm.c:46:1: error: the frame size of 1328 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file_free':
drivers/gpu/drm/i915/selftests/mock_drm.c:54:1: error: the frame size of 1312 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
66d9cb5d805a ("drm/i915: Mock the GEM device for self-testing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419094143.16922-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Kees Cook [Tue, 11 Apr 2017 04:56:30 +0000 (21:56 -0700)]
drm/i915: Avoid format string expansion from engine names
While highly unlikely, this makes sure that the string built from
engine names won't be processed as a format string.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411045630.GA6612@beast
Tvrtko Ursulin [Tue, 18 Apr 2017 10:52:11 +0000 (11:52 +0100)]
drm/i915: Fix GCC 4.4 build issue with __intel_wait_for_register_fw
Move the BUILD_BUG_ONs for busy-wait duration outside the
_wait_for_atomic macro as discussed on the mailing list.
v2: Simplify the macro by omitting the ret__ local. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Fixes:
1d1a9774e404 ("drm/i915: Extend intel_wait_for_register_fw() with fast timeout")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170418105211.7089-1-tvrtko.ursulin@linux.intel.com
Mika Kuoppala [Thu, 13 Apr 2017 11:15:27 +0000 (14:15 +0300)]
drm/i915: Fix system hang with EI UP masked on Haswell
Previously with commit
a9c1f90c8e17
("drm/i915: Don't mask EI UP interrupt on IVB|SNB") certain,
seemingly unrelated bit (GEN6_PM_RP_UP_EI_EXPIRED) was needed
to be unmasked for IVB and SNB in order to prevent system hang
with chained batchbuffers.
Our CI was seeing incomplete results with tests that used
chained batches and it was found out that HSW needs to have this
same bit unmasked to reliably survive chained batches.
Always unmask GEN6_PM_RP_UP_EI_EXPIRED on Haswell to
prevent system hang with batch chaining.
Testcase: igt/gem_exec_fence/nb-await-default
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100672
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1492082127-29007-1-git-send-email-mika.kuoppala@intel.com
Daniel Vetter [Tue, 18 Apr 2017 09:18:16 +0000 (11:18 +0200)]
drm/i915: Update DRIVER_DATE to
20170418
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 15 Apr 2017 09:39:02 +0000 (10:39 +0100)]
drm/i915: Copy user requested buffers into the error state
Introduce a new execobject.flag (EXEC_OBJECT_CAPTURE) that userspace may
use to indicate that it wants the contents of this buffer preserved in
the error state (/sys/class/drm/cardN/error) following a GPU hang
involving this batch.
Use this at your discretion, the contents of the error state. although
compressed, are allocated with GFP_ATOMIC (i.e. limited) and kept for all
eternity (until the error state is destroyed).
Based on an earlier patch by Ben Widawsky <ben@bwidawsk.net>
Testcase: igt/gem_exec_capture
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170415093902.22581-1-chris@chris-wilson.co.uk
Dan Carpenter [Fri, 14 Apr 2017 19:54:25 +0000 (22:54 +0300)]
drm/i915: set "ret" correctly on error paths
If "crtc" is NULL, then my static checker complains that "ret" isn't
initialized on that path. It doesn't really cause a problem unless
"ret" is somehow set to -EDEADLK which is not likely.
Chris Wilson also noticed another error path where "ret" isn't set
correctly.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170414195425.GA8144@mwanda
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Dan Carpenter [Thu, 13 Apr 2017 19:52:17 +0000 (22:52 +0300)]
drm/i915: checking for NULL instead of IS_ERR() in mock selftests
i915_gem_request_alloc() uses error pointers. It never returns NULLs.
Fixes:
0daf0113cff6 ("drm/i915: Mock infrastructure for request emission")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413195217.GA26108@mwanda
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Manasi Navare [Thu, 6 Apr 2017 13:44:19 +0000 (16:44 +0300)]
drm/i915: Implement Link Rate fallback on Link training failure
If link training at a link rate optimal for a particular
mode fails during modeset's atomic commit phase, then we
let the modeset complete and then retry. We save the link rate
value at which link training failed, update the link status property
to "BAD" and use a lower link rate to prune the modes. It will redo
the modeset on the current mode at lower link rate or if the current
mode gets pruned due to lower link constraints then, it will send a
hotplug uevent for userspace to handle it.
This is also required to pass DP CTS tests 4.3.1.3, 4.3.1.4,
4.3.1.6.
This patch is a resend of the original commit id (
233ce881dd91fb
"drm/i915: Implement Link Rate fallback on Link training failure")
which got reverted in this commit id (
afc1ebf4562a14 Revert
"drm/i915: Implement Link Rate fallback on Link training failure")
due to CI failures.
After investigating the CI failures it was found that these
were essentially the failures which were always there but hidden because
they used to be DRM_DEBUG_KMS messages for link failures so never got
caught by CI. But now this patch actually throws DRM_ERROR if the link
training fails at RBR and 1 lane. So it caught these link train failures.
There were two failures:
1. On SKL 6700k this was because the machine in CI lab is a SKL desktop
without eDP on Port A. But our VBT initialization code in the driver writes
VBT defaults in a way that it always sets DP flag on Port A and this does
not get cleared after parsing the VBT outputs. This has been fixed in
commit id (
bb1d132935c2f8 "drm/i915/vbt: split out defaults that are set
when there is no VBT) and (
665788572c6410b "drm/i915/vbt: don't propagate
errors from intel_bios_init())
2. On ILK-650 desktop - This was happening because of a bad monitor desktop
combination. I switched the monitor in the CI lab and that helped get rid
of the link failures on ILK system.
v10:
* Rebase on drm-tip and resend after revert
v9:
* Use the trimmed max values of link rate/lane count based on
link train fallback (Daniel Vetter)
v8:
* Set link_status to BAD first and then call mode_valid (Jani Nikula)
v7:
Remove the redundant variable in previous patch itself
v6:
* Obtain link rate index from fallback_link_rate using
the helper intel_dp_link_rate_index (Jani Nikula)
* Include fallback within intel_dp_start_link_train (Jani Nikula)
v5:
* Move set link status to drm core (Daniel Vetter, Jani Nikula)
v4:
* Add fallback support for non DDI platforms too
* Set connector->link status inside set_link_status function
(Jani Nikula)
v3:
* Set link status property to BAd unconditionally (Jani Nikula)
* Dont use two separate variables link_train_failed and link_status
to indicate same thing (Jani Nikula)
v2:
* Squashed a few patches (Jani Nikula)
Acked-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.wentland@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/16ca48b1e74c618929245e9a085b9e3483c3a16d.1491485983.git.jani.nikula@intel.com
Ville Syrjälä [Wed, 12 Apr 2017 19:30:17 +0000 (22:30 +0300)]
drm/i915: Perform link quality check unconditionally during long pulse
Apparently some DP sinks are a little nuts and cause HPD to drop
intermittently during modesets. This happens eg. on an ASUS PB287Q.
In oder to recover from this we can't really use the previous
connector status to determine if the link needs retraining, so let's
just ignore that piece of information and do the retrain
unconditionally. We do of course still check whether the link is
supposed to be running or not.
To actually get read out the EDID and update things properly we
also need to nuke the goto out added by commit
7d23e3c37bb3
("drm/i915: Cleaning up intel_dp_hpd_pulse"). I'm actually not sure
why that was there. Perhaps to avoid an EDID read if the connector
status didn't appear to change, but that sort of thing is quite racy
and would have failed anyway if we failed to keep up with the
hotplugs (if we missed the HPD down in between two HPD ups). And
now that we take this codepath unconditionally we definitely need
to drop the goto as otherwise we would never do the EDID read.
v2: Drop the goto that made us skip EDID reads entirely. Doh!
v3: Rebase due to locking changes
s/apparely/apparently/ in the comment (Chris)
Cc: stable@vger.kernel.org
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reported-by: Palmer Dabbelt <palmer@dabbelt.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99766
References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/119779.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412193017.21029-1-ville.syrjala@linux.intel.com
daniele.ceraolospurio@intel.com [Fri, 7 Apr 2017 00:18:52 +0000 (17:18 -0700)]
drm/i915/guc: write wopcm related register once during uc init
The wopcm registers are write-once, so any write after the first one
will just be ignored. The registers survive a GPU reset but not
always a suspend/resume cycle, so to keep things simple keep the
writes in the intel_uc_init_hw function instead of moving it earlier
to make sure we attempt them every time we try to load GuC.
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491524332-23860-1-git-send-email-daniele.ceraolospurio@intel.com
Chris Wilson [Wed, 12 Apr 2017 08:02:51 +0000 (09:02 +0100)]
drm/i915: Fix use after free in lpe_audio_platdev_destroy()
[31908.547136] BUG: KASAN: use-after-free in intel_lpe_audio_teardown+0x78/0xb0 [i915] at addr
ffff8801f7788358
[31908.547297] Read of size 8 by task drv_selftest/3781
[31908.547405] CPU: 0 PID: 3781 Comm: drv_selftest Tainted: G BU W 4.10.0+ #451
[31908.547553] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[31908.547682] Call Trace:
[31908.547772] dump_stack+0x68/0x9f
[31908.547857] kasan_object_err+0x1c/0x70
[31908.547947] kasan_report_error+0x1f1/0x4f0
[31908.548038] ? kfree+0xaa/0x170
[31908.548121] kasan_report+0x34/0x40
[31908.548211] ? klist_children_get+0x20/0x30
[31908.548472] ? intel_lpe_audio_teardown+0x78/0xb0 [i915]
[31908.548567] __asan_load8+0x5e/0x70
[31908.548824] intel_lpe_audio_teardown+0x78/0xb0 [i915]
[31908.549080] intel_audio_deinit+0x28/0x80 [i915]
[31908.549315] i915_driver_unload+0xe4/0x360 [i915]
[31908.549551] ? i915_driver_load+0x1d70/0x1d70 [i915]
[31908.549651] ? trace_hardirqs_on+0xd/0x10
[31908.549885] i915_pci_remove+0x23/0x30 [i915]
[31908.549978] pci_device_remove+0x5c/0x100
[31908.550069] device_release_driver_internal+0x1db/0x2e0
[31908.550165] driver_detach+0x68/0xc0
[31908.550256] bus_remove_driver+0x8b/0x150
[31908.550346] driver_unregister+0x3e/0x60
[31908.550439] pci_unregister_driver+0x1d/0x110
[31908.550531] ? find_module_all+0x7a/0xa0
[31908.550791] i915_exit+0x1a/0x87 [i915]
[31908.550881] SyS_delete_module+0x264/0x2c0
[31908.550971] ? free_module+0x430/0x430
[31908.551064] ? trace_hardirqs_off_caller+0x16/0x110
[31908.551159] ? trace_hardirqs_on_caller+0x16/0x280
[31908.551256] ? trace_hardirqs_on_thunk+0x1a/0x1c
[31908.551350] entry_SYSCALL_64_fastpath+0x1c/0xb1
[31908.551440] RIP: 0033:0x7f1d67312ec7
[31908.551520] RSP: 002b:
00007ffebe34e888 EFLAGS:
00000206 ORIG_RAX:
00000000000000b0
[31908.551650] RAX:
ffffffffffffffda RBX:
ffffffff811123f6 RCX:
00007f1d67312ec7
[31908.551743] RDX:
0000000000000000 RSI:
0000000000000800 RDI:
0000560d0af476b8
[31908.551837] RBP:
ffff880233d87f98 R08:
0000000000000000 R09:
00007ffebe34e8b8
[31908.551930] R10:
00007f1d68adf8c0 R11:
0000000000000206 R12:
0000000000000000
[31908.552023] R13:
0000560d0af46440 R14:
0000000000000034 R15:
00007ffebe34d860
[31908.552121] ? trace_hardirqs_off_caller+0x16/0x110
[31908.552217] Object at
ffff8801f7788000, in cache kmalloc-2048 size: 2048
[31908.552306] Allocated:
[31908.552377] PID = 3781
[31908.552456] save_stack_trace+0x16/0x20
[31908.552539] kasan_kmalloc+0xee/0x190
[31908.552627] __kmalloc+0xdb/0x1b0
[31908.552713] platform_device_alloc+0x27/0x90
[31908.552804] platform_device_register_full+0x36/0x220
[31908.553066] intel_lpe_audio_init+0x41e/0x570 [i915]
[31908.553320] intel_audio_init+0xd/0x40 [i915]
[31908.553552] i915_driver_load+0x13f5/0x1d70 [i915]
[31908.553788] i915_pci_probe+0x65/0xe0 [i915]
[31908.553881] pci_device_probe+0xda/0x140
[31908.553969] driver_probe_device+0x400/0x660
[31908.554058] __driver_attach+0x11c/0x120
[31908.554147] bus_for_each_dev+0xe6/0x150
[31908.554237] driver_attach+0x26/0x30
[31908.554325] bus_add_driver+0x26b/0x3b0
[31908.554412] driver_register+0xce/0x190
[31908.554502] __pci_register_driver+0xaf/0xc0
[31908.554589] 0xffffffffa0550063
[31908.554675] do_one_initcall+0x8b/0x1e0
[31908.554764] do_init_module+0x102/0x325
[31908.554852] load_module+0x3aad/0x45e0
[31908.554944] SyS_finit_module+0x169/0x1a0
[31908.555033] entry_SYSCALL_64_fastpath+0x1c/0xb1
[31908.555119] Freed:
[31908.555188] PID = 3781
[31908.555266] save_stack_trace+0x16/0x20
[31908.555349] kasan_slab_free+0xb0/0x180
[31908.555436] kfree+0xaa/0x170
[31908.555520] platform_device_release+0x76/0x80
[31908.555610] device_release+0x45/0xe0
[31908.555698] kobject_put+0x11f/0x260
[31908.555785] put_device+0x12/0x20
[31908.555871] platform_device_unregister+0x1b/0x20
[31908.556135] intel_lpe_audio_teardown+0x5c/0xb0 [i915]
[31908.556390] intel_audio_deinit+0x28/0x80 [i915]
[31908.556622] i915_driver_unload+0xe4/0x360 [i915]
[31908.556858] i915_pci_remove+0x23/0x30 [i915]
[31908.556948] pci_device_remove+0x5c/0x100
[31908.557037] device_release_driver_internal+0x1db/0x2e0
[31908.557129] driver_detach+0x68/0xc0
[31908.557217] bus_remove_driver+0x8b/0x150
[31908.557304] driver_unregister+0x3e/0x60
[31908.557394] pci_unregister_driver+0x1d/0x110
[31908.557653] i915_exit+0x1a/0x87 [i915]
[31908.557741] SyS_delete_module+0x264/0x2c0
[31908.557834] entry_SYSCALL_64_fastpath+0x1c/0xb1
[31908.557919] Memory state around the buggy address:
[31908.558005]
ffff8801f7788200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[31908.558127]
ffff8801f7788280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[31908.558255] >
ffff8801f7788300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[31908.558374] ^
[31908.558467]
ffff8801f7788380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[31908.558595]
ffff8801f7788400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
v2: Just leak the memory (8 bytes) as freeing it ourselves is not safe,
and we need to coordinate a proper fix in platform_device itself.
Fixes:
eef57324d926 ("drm/i915: setup bridge for HDMI LPE audio driver")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99952
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jerome Anand <jerome.anand@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412080251.30648-1-chris@chris-wilson.co.uk
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Manasi Navare [Thu, 6 Apr 2017 21:00:12 +0000 (14:00 -0700)]
drm/i915/dp: Validate cached link rate and lane count before retraining
Currently intel_dp_check_link_status() tries to retrain the link if
Clock recovery or Channel EQ for any of the lanes indicated by
intel_dp->lane_count is not set. However these values cached in intel_dp
structure can be stale if link training has failed for these values
during previous modeset. Or these values can get stale since we have
now re read the DPCD registers or it can be 0 in case of connected boot
case.
This patch validates these values against the max link rate and max lane
count values.
This is absolutely required incase the common_rates or max lane count
are now different due to link fallback.
v2:
* Include the FIXME commnet inside the function (Ville Syrjala)
* Remove the redundant parenthesis (Ville Syrjala)
v3 by Jani:
* rebase on the DP refactoring series
* rename intel_dp_link_params_is_valid to intel_dp_link_params_valid
* minor stylistic changes
v4:
* Compare the link rate against max link rate not the
common_rates since common_rates does not account for the
lowered fallback link rate value. (Ville Syrjala)
v5:
* Fixed a warning for unused variable (Manasi)
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491512412-30016-1-git-send-email-manasi.d.navare@intel.com
Chris Wilson [Tue, 11 Apr 2017 23:44:27 +0000 (00:44 +0100)]
drm/i915: Wake device for emitting request during selftest
igt_mmap_offset_exhaustion() selftest was using live requests to make an
object busy, but we did not hold a runtime pm wakeref for submitting the
requests. Acquire it to avoid triggering "RPM wakelock ref not held
during HW access" warnings.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411234427.14841-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 11 Apr 2017 23:44:26 +0000 (00:44 +0100)]
drm/i915: Pretend the engine is always idle when mocking
If we have a mock engine and it has no more requests in flight, report
it as idle as there is no hardware to contradict us! Otherwise we
attempt to query the hw that doesn't exist and find that the hw hasn't
set its idle bit and we get upset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411234427.14841-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 12 Apr 2017 09:21:43 +0000 (10:21 +0100)]
drm/i915: Add stub mmio read/write routines to mock device
Provide dummy function pointers for the mock device in case we do hit
mmio during testing.
v2: Use ASSIGN_READ/WRITE_MMIO_FUNCS macros
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412092143.3822-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 12 Apr 2017 11:01:11 +0000 (12:01 +0100)]
drm/i915: Treat WC a separate cache domain
When discussing a new WC mmap, we based the interface upon the
assumption that GTT was fully coherent. How naive! Commits
3b5724d702ef
("drm/i915: Wait for writes through the GTT to land before reading
back") and
ed4596ea992d ("drm/i915/guc: WA to address the Ringbuffer
coherency issue") demonstrate that writes through the GTT are indeed
delayed and may be overtaken by direct WC access. To be safe, if
userspace is mixing WC mmaps with other potential GTT access (pwrite,
GTT mmaps) it should use set_domain(WC).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96563
Testcase: igt/gem_pwrite/small-gtt*
Testcase: igt/drv_selftest/coherency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412110111.26626-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 12 Apr 2017 11:01:10 +0000 (12:01 +0100)]
drm/i915: Combine write_domain flushes to a single function
In the next patch, we will introduce a new cache domain for
differentiating between GTT access and direct WC access. This will
require us to include WC in our write_domain flushes. Rather than
duplicate a third function, combine the existing two into one and
flushing WC writes will then be automatically handled as well.
v2: Be smarter and clearer by passing in the write domains to flush (Joonas)
v3: One missed ~ in v2 conversion
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412110111.26626-1-chris@chris-wilson.co.uk
Maarten Lankhorst [Tue, 4 Apr 2017 13:24:57 +0000 (15:24 +0200)]
drm/i915: Do not use lock all in hsw_trans_edp_pipe_A_crc_wa
There is no need to acquire all locks here,
doing a commit after forcing a modeset on the affected crtc
is enough. Any other locks needed will be acquired as needed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491312297-18673-1-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Tue, 4 Apr 2017 13:22:48 +0000 (15:22 +0200)]
Revert "drm/i915: Lock mode_config.mutex in intel_display_resume."
This reverts commit
ea49c9acf2db7082f0406bb3a570cc6bad37082b.
mode_config.mutex was originally added to fix WARNs in connector
functions, but now that atomic nonblocking modeset support is
included, we will likely never hold any any lock at all.
The WARN mentioned in commit
bbf35e9defb9a6d1 ("drm/i915:
Pass atomic state to intel_audio_codec_enable, v2."), so it's
safe to revert this now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491312168-18147-1-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 10 Apr 2017 09:07:11 +0000 (11:07 +0200)]
drm/i915: Convert intel DVO connector to atomic
No properties are supported, so just use the helper and reject everything.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491815239-10685-6-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 10 Apr 2017 09:07:10 +0000 (11:07 +0200)]
drm/i915: Convert intel_crt connector properties to atomic.
No properties are supported, so just use the helper and reject
everything.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491815239-10685-5-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 10 Apr 2017 09:07:09 +0000 (11:07 +0200)]
drm/i915: Convert intel_dp_mst connector properties to atomic.
MST doesn't support setting any properties, but it should still
use the atomic helper for setting properties.
Only path and tile properties are supported (read-only).
Those are immutable, and handled by drm core.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491815239-10685-4-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 10 Apr 2017 10:51:10 +0000 (12:51 +0200)]
drm/i915: Remove unused dp properties for dp-mst.
Those properties are not hooked up on MST and were ignored. Best not expose them at all.
Without this the next patch fails to start on X.org, because the DP-MST properties could
not be read.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/751b85a0-81cd-09e2-9e60-6d4ddbf1c6ac@linux.intel.com
Testcase: kms_properties
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 10 Apr 2017 09:07:08 +0000 (11:07 +0200)]
drm/i915: Convert intel_tv connector properties to atomic, v5.
intel_tv has properties that are handled in the atomic core, but
needs a modeset to update the properties inside the connector.
The detect(), get_mode() and mode_valid() probe callbacks also
depend on the connector state, which made this a good connector
to convert first. It helped find all the issues when converting
connectors to atomic.
Because of these requirements, connector atomic_check() was added
and connection_mutex is held during probing. The diffstat looks
more favorable now. :)
Changes since v1:
- Add intel_encoder->swap_state to allow updating connector state.
- Add intel_tv->format for detect_mode and mode_valid, updated on atomic commit.
Changes since v2:
- Fix typo in tv_choose_preferred modes function name.
- Assignment of tv properties is done in core, so intel_tv only needs
a atomic_check function. Thanks Ville!
Changes since v3:
- connection_mutex is now held in mode_valid() and get_modes(),
this removes the need for caching parts of the connector_state.
Changes since v4:
- Use the new atomic connector check function.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491815239-10685-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 10 Apr 2017 09:07:07 +0000 (11:07 +0200)]
drm/i915: Remove unused members from intel_tv.c
They have been unused since 2010, after the code for
intel_tv_save/restore was removed in the below commit:
commit
6443170f6d862a1cc89e61e4bb2410b714b875f4
Author: Eric Anholt <eric@anholt.net>
Date: Fri Apr 2 15:24:27 2010 -0700
drm/i915: Remove dead KMS encoder save/restore code.
This was brought over from UMS, and used for a while until we decided
that drm_helper_resume_force_mode was easier and more reliable, since
it didn't require duplicating all the code deleted here. We just
forgot to delete all that junk for a while.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491815239-10685-2-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Add commit blurb based on danvet's feedback.]
Chris Wilson [Tue, 11 Apr 2017 17:58:50 +0000 (18:58 +0100)]
drm/i915/execlists: Document runtime pm for intel_lrc_irq_handler()
We indirectly hold the runtime-pm for the intel_lrc_irq_handler() by
virtue of dev_priv->gt.awake keeping a wakeref whilst the requests are
busy. As this is not obvious from the code, add a comment.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411175850.2470-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Daniel Vetter [Wed, 12 Apr 2017 08:07:43 +0000 (10:07 +0200)]
Merge airlied/drm-next into drm-intel-next-queued
Maarten needs both the new connector->atomic_check hook and the
connection_mutex locking changes in the probe helpers to be able to
start merging the connector property conversion to atomic.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 11 Apr 2017 19:00:42 +0000 (20:00 +0100)]
drm/i915: Lie and treat all engines as idle if wedged
Similar to commit
8490ae207f1d ("drm/i915: Suppress busy status for
engines if wedged") we also want to report intel_engine_is_idle() as
true as well as the main intel_engines_are_idle(), as we now check that
the engines are idle when overwriting the HWS page. This is not true
whilst we are setting the device as wedged, at least according to our
bookkeeping, so we have to lie to ourselves!
[ 383.588601] [drm:i915_reset [i915]] *ERROR* Failed to reset chip: -110
[ 383.588685] ------------[ cut here ]------------
[ 383.588755] WARNING: CPU: 0 PID: 12 at drivers/gpu/drm/i915/intel_engine_cs.c:226 intel_engine_init_global_seqno+0x222/0x290 [i915]
[ 383.588757] WARN_ON(!intel_engine_is_idle(engine))
[ 383.588759] Modules linked in: ctr ccm snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core arc4 iwldvm mac80211 snd_pcm snd_hwdep snd_seq_midi snd_seq_midi_event rfcomm bnep snd_rawmidi intel_powerclamp coretemp dm_multipath iwlwifi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel btusb aesni_intel btrtl btbcm aes_x86_64 crypto_simd cryptd btintel snd_timer glue_helper bluetooth intel_ips snd_seq_device cfg80211 snd soundcore binfmt_misc mei_me mei dm_mirror dm_region_hash dm_log i915 intel_gtt i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea prime_numbers ahci libahci drm e1000e
[ 383.588851] CPU: 0 PID: 12 Comm: migration/0 Not tainted 4.11.0-rc5+ #207
[ 383.588853] Hardware name: LENOVO 514328U/514328U, BIOS 6QET44WW (1.14 ) 04/20/2010
[ 383.588855] Call Trace:
[ 383.588866] dump_stack+0x63/0x90
[ 383.588871] __warn+0xc7/0xf0
[ 383.588876] warn_slowpath_fmt+0x4a/0x50
[ 383.588883] ? set_next_entity+0x821/0x910
[ 383.588943] intel_engine_init_global_seqno+0x222/0x290 [i915]
[ 383.588998] __i915_gem_set_wedged_BKL+0xa4/0x190 [i915]
[ 383.589003] ? __switch_to+0x215/0x390
[ 383.589008] multi_cpu_stop+0xbb/0xe0
[ 383.589012] ? cpu_stop_queue_work+0x90/0x90
[ 383.589016] cpu_stopper_thread+0x82/0x110
[ 383.589021] smpboot_thread_fn+0x137/0x190
[ 383.589026] kthread+0xf7/0x130
[ 383.589030] ? sort_range+0x20/0x20
[ 383.589034] ? kthread_park+0x90/0x90
[ 383.589040] ret_from_fork+0x2c/0x40
Fixes:
2ca9faa551c4 ("drm/i915: Assert the engine is idle before overwiting the HWS")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411190042.25662-1-chris@chris-wilson.co.uk
Daniele Ceraolo Spurio [Tue, 11 Apr 2017 10:11:12 +0000 (03:11 -0700)]
drm/i915: Use the engine class to get the context size
Technically speaking, the context size is per engine class, not per
instance.
v2: Add MISSING_CASE (Tvrtko)
v3: Rebased
v4: Restore the interface back to hiding the class lookup (Chris)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491905472-16189-1-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Tue, 11 Apr 2017 16:56:58 +0000 (17:56 +0100)]
drm/i915: Bail if we do not setup the RCS engine
In places, we assume that RCS exists. This has been true forever, but
let us catch this failure during bringup by adding an explicit check
that we do have an RCS engine.
v2: Make use of HAS_ENGINE (Tvrtko)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411165658.23828-1-chris@chris-wilson.co.uk
Jani Nikula [Thu, 6 Apr 2017 13:44:17 +0000 (16:44 +0300)]
drm/i915/dp: read sink count to a temporary variable first
Don't clobber intel_dp->sink_count with the raw value.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/37d3222115172922fcd5ab038238359935bd561f.1491485983.git.jani.nikula@intel.com
Jani Nikula [Thu, 6 Apr 2017 13:44:16 +0000 (16:44 +0300)]
drm/i915/dp: use readb and writeb calls for single byte DPCD access
This is what we have the readb and writeb variants for. Do some minor
return value and variable cleanup while at it.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fd8a8f110bcfdc73a8c9241e5f9d61f7dd7c9677.1491485983.git.jani.nikula@intel.com
Jani Nikula [Thu, 6 Apr 2017 13:44:15 +0000 (16:44 +0300)]
drm/i915/dp: localize link rate index variable more
Localize link_rate_index to the if block, and rename to just index to
reduce indent.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/d348d990c96705427b93c1cac8c3e4447d06eebf.1491485983.git.jani.nikula@intel.com
Jani Nikula [Thu, 6 Apr 2017 13:44:14 +0000 (16:44 +0300)]
drm/i915/mst: use max link not sink lane count
The source might not support as many lanes as the sink, or the link
training might have failed at higher lane counts. Take these into
account.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/cf59530acafaf9258fb643d321ad251b44f34e29.1491485983.git.jani.nikula@intel.com
Jani Nikula [Thu, 6 Apr 2017 13:44:13 +0000 (16:44 +0300)]
drm/i915/dp: add functions for max common link rate and lane count
These are the theoretical maximums common for source and sink. These are
the maximums we should start with. They may be degraded in case of link
training failures, and the dynamic link values are stored separately.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/5088aca253c47dfa18251e1adb976aca1718f083.1491485983.git.jani.nikula@intel.com
Jani Nikula [Thu, 6 Apr 2017 13:44:12 +0000 (16:44 +0300)]
drm/i915/dp: don't call the link parameters sink parameters
If we modify these on the fly depending on the link conditions, don't
pretend they are sink properties.
Some link vs. sink confusion still remains, but we'll take care of them
in follow-up patches.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/3739b4fac502ebd1c6e075a62c1a195e4094eb16.1491485983.git.jani.nikula@intel.com
Jani Nikula [Thu, 6 Apr 2017 13:44:11 +0000 (16:44 +0300)]
drm/i915/dp: do not limit rate seek when not needed
In link training fallback, we're trying to find a rate that we know is
in a sorted array of common link rates. We don't need to limit the array
using the max rate. For test request, the DP CTS doesn't say we should
limit the rate based on earlier fallback. This lets us get rid of
intel_dp_link_rate_index() and use intel_dp_rate_index() instead.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/33cab481a3228f31e938b5891a6285d892dcf272.1491485983.git.jani.nikula@intel.com
Jani Nikula [Thu, 6 Apr 2017 13:44:10 +0000 (16:44 +0300)]
drm/i915/dp: cache common rates with sink rates
Now that source rates are static and sink rates are updated whenever
DPCD is updated, we can do and cache the intersection of them whenever
sink rates are updated. This reduces code complexity, as we don't have
to keep calling the functions to intersect. We also get rid of several
common rates arrays on stack.
Limiting the common rates by a max link rate can be done by picking the
first N elements of the cached common rates.
v2: get rid of the local common_rates variable (Manasi)
v3: don't clobber cached eDP rates on short pulse (Ville)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/e3b287e8cb6559b1f8fd4e80b78a8d22f1802eb7.1491485983.git.jani.nikula@intel.com
Jani Nikula [Thu, 6 Apr 2017 13:44:09 +0000 (16:44 +0300)]
drm/i915/dp: use the sink rates array for max sink rates
Looking at DPCD DP_MAX_LINK_RATE may be completely bogus for eDP 1.4
which is allowed to use link rate select method and have 0 in max link
rate. With this change, it makes sense to store the max rate as the
actual rate rather than as a bw code.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/3e8baadb406d59f414cab36fed9f0b35d207fde5.1491485983.git.jani.nikula@intel.com
Chris Wilson [Tue, 11 Apr 2017 12:43:06 +0000 (13:43 +0100)]
drm/i915: Rename intel_engine_cs.exec_id to uabi_id
We want to refer to the index of the engine consistently throughout the
userspace ABI. We already have such an index through the execbuffer
engine specifier, that needs to be able to refer to each engine
specifically, so rename it the index to uabi_id to reflect its
generality beyond execbuf.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411124306.15448-1-chris@chris-wilson.co.uk
Oscar Mateo [Mon, 10 Apr 2017 14:34:32 +0000 (07:34 -0700)]
drm/i915: Split the engine info table in two levels, using class + instance
There are some properties that logically belong to the engine class, and some
that belong to the engine instance. Make it explicit.
v2: Commit message (Tvrtko)
v3:
- Rebased
- Exec/uabi id should be per instance (Chris)
v4:
- Rebased
- Avoid re-ordering fields for smaller diff (Tvrtko)
- Bug on oob access to the class array (Michal)
v5: Bug on the right thing (Michal)
v6: Rebased
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491834873-9345-5-git-send-email-oscar.mateo@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Oscar Mateo [Mon, 10 Apr 2017 14:34:31 +0000 (07:34 -0700)]
drm/i915: Generate the engine name based on the instance number
Not really needed, but makes the next change a little bit more compact.
v2:
- Use zero-based numbering for engine names: xcs0, xcs1.. xcsN (Tvrtko, Chris)
- Make sure the mock engine name is null-terminated (Tvrtko, Chris)
v3: Because I'm stupid (Chris)
v4: Verify engine name wasn't truncated (Michal)
v5:
- Kill the warning in mock engine (Chris)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491834873-9345-4-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Oscar Mateo [Mon, 10 Apr 2017 14:34:30 +0000 (07:34 -0700)]
drm/i915: Use the same vfunc for BSD2 ring init
If we needed to do something different for the init functions, we could
always look at the engine instance to make the distinction. But, in any
case, the two functions are virtually identical already (please notice
that BSD2_RING is only used from gen8 onwards).
With this, the init functions depends excusively on the engine class
(a fact that we will use soon).
v2: Commit message
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491834873-9345-3-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Daniele Ceraolo Spurio [Mon, 10 Apr 2017 14:34:29 +0000 (07:34 -0700)]
drm/i915: Classify the engines in class + instance
In such a way that vcs and vcs2 are just two different instances (0 and 1)
of the same engine class (VIDEO_DECODE_CLASS).
v2: Align the instance types (Tvrtko)
v3: Don't use enums for bspec-defined stuff (Michal)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491834873-9345-2-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Tue, 11 Apr 2017 10:13:40 +0000 (11:13 +0100)]
drm/i915: Use safer intel_uncore_wait_for_register in ring-init
While we do hold the forcewake for legacy ringbuffer initialisation, we
don't guard our access with the uncore.lock spinlock. In theory, we only
initialise when no others should be accessing the same mmio cachelines,
but in practice be safe as this is an infrequently used path and not
worth risky micro-optimisations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411101340.31994-5-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Tue, 11 Apr 2017 10:13:39 +0000 (11:13 +0100)]
drm/i915: Use __intel_uncore_wait_for_register_fw for sandybride_pcode_read
Since the sandybridge_pcode_read() may be called from
skl_pcode_request() inside an atomic context (with preempt disabled), we
should avoid hitting any sleeping paths. Currently is being called with
a 500ms timeout, irrespective of being inside an atomic context or not.
This is reduced down to 500us to play nice with the atomic context, and
that appears to be sufficient to keep BAT happy (we have a DRM_ERROR
should it timeout), i.e. we do not see any 500us pcode timeouts for
normal use. So leave it as a pure spin without having to introduce new
code paths to separate atomic/normal contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411101340.31994-4-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Tue, 11 Apr 2017 10:13:38 +0000 (11:13 +0100)]
drm/i915: Acquire uncore.lock over intel_uncore_wait_for_register()
We acquire the forcewake and use I915_READ_FW instead for the atomic
wait within intel_uncore_wait_for_register. However, this still leaves
us vulnerable to concurrent mmio access to the register, which can cause
system hangs on gen7. The protection is to acquire uncore.lock around
each register, so lets add it back.
v2: Wrap __intel_wait_for_register_fw() to re-use its atomic wait_for
loop and spare adding another for ourselves.
v3: Add might_sleep() annotation
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411101340.31994-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Tue, 11 Apr 2017 10:13:37 +0000 (11:13 +0100)]
drm/i915: Stop sleeping from inside gen6_bsd_submit_request()
submit_request() is called from an atomic context, it's not allowed to
sleep. We have to be careful in our parameters to
intel_uncore_wait_for_register() to limit ourselves to the atomic wait
loop and not incur the wrath of our warnings.
Fixes:
6976e74b5fa1 ("drm/i915: Don't allow overuse of __intel_wait_for_register_fw()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170410143807.22725-1-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20170411101340.31994-2-chris@chris-wilson.co.uk
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Tue, 11 Apr 2017 11:27:05 +0000 (12:27 +0100)]
drm/i915: Stop second guessing the caller for intel_uncore_wait_for_register()
Allow the caller to use the fast_timeout_us to specify how long to wait
within the atomic section, rather than transparently switching to a
sleeping loop for larger values. This is required as some callsites may
need a long wait and are in an atomic section.
v2: Reinforce kerneldoc fast_timeout_us limit with a GEM_BUG_ON
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411112705.12656-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Dave Airlie [Mon, 10 Apr 2017 21:47:02 +0000 (07:47 +1000)]
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
Noteworthy changes this time:
1) 4k support for newer chips (ganging up hwpipes and mixers)
2) using OPP bindings for gpu
3) more prep work towards per-process pagetables
* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (47 commits)
msm/drm: gpu: Dynamically locate the clocks from the device tree
drm/msm: gpu: Use OPP tables if we can
drm/msm: Hard code the GPU "slow frequency"
drm/msm: Add MSM_PARAM_GMEM_BASE
drm/msm: Reference count address spaces
drm/msm: Make sure to detach the MMU during GPU cleanup
drm/msm/mdp5: Enable 3D mux in mdp5_ctl
drm/msm/mdp5: Reset CTL blend registers before configuring them
drm/msm/mdp5: Assign 'right' mixer to CRTC state
drm/msm/mdp5: Stage border out on base stage if CRTC has 2 LMs
drm/msm/mdp5: Stage right side hwpipes on Right-side Layer Mixer
drm/msm/mdp5: Prepare Layer Mixers for source split
drm/msm/mdp5: Configure 'right' hwpipe
drm/msm/mdp5: Assign a 'right hwpipe' to plane state
drm/msm/mdp5: Create mdp5_hwpipe_mode_set
drm/msm/mdp5: Add optional 'right' Layer Mixer in CRTC state
drm/msm/mdp5: Add a CAP for Source Split
drm/msm/mdp5: Remove mixer/intf pointers from mdp5_ctl
drm/msm/mdp5: Start using parameters from CRTC state
drm/msm/mdp5: Add more stuff to CRTC state
...
Dave Airlie [Mon, 10 Apr 2017 21:41:10 +0000 (07:41 +1000)]
Merge tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc into drm-next
Last drm-misc-next pull req for 4.12
Core changes:
- fb_helper checkpatch cleanup and simplified _add_one_connector() (Thierry)
- drm_ioctl and drm_sysfs improved/gained documentation (Daniel)
- [ABI] Repurpose reserved field in drm_event_vblank for crtc_id (Ander)
- Plumb acquire ctx through legacy paths to avoid lock_all and legacy_backoff
(Daniel)
- Add connector_atomic_check to check conn constraints on modeset (Maarten)
- Add drm_of_find_panel_or_bridge to remove boilerplate in drivers (Rob)
Driver changes:
- meson moved to drm-misc (Neil)
- Added support for Amlogic GX SoCs in dw-hdmi (Neil)
- Rockchip unbind actually cleans up the things bind initializes (Jeffy)
- A couple misc fixes in virtio, dw-hdmi
NOTE: this also includes a backmerge of drm-next as well rc5 (we needed vmwgfx
as well as the new synopsys media formats)
* tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc: (77 commits)
Revert "drm: Don't allow interruptions when opening debugfs/crc"
drm: Only take cursor locks when the cursor plane exists
drm/vmwgfx: Fix fbdev emulation using legacy functions
drm/rockchip: Shutdown all crtcs when unbinding drm
drm/rockchip: Reorder drm bind/unbind sequence
drm/rockchip: analogix_dp: Disable clock when unbinding
drm/rockchip: vop: Unprepare clocks when unbinding
drm/rockchip: vop: Enable pm domain before vop_initial
drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding
drm/rockchip: cdn-dp: Don't try to release firmware when not loaded
drm: bridge: analogix: Destroy connector & encoder when unbinding
drm: bridge: analogix: Disable clock when unbinding
drm: bridge: analogix: Unregister dp aux when unbinding
drm: bridge: analogix: Detach panel when unbinding analogix dp
drm: Don't allow interruptions when opening debugfs/crc
drm/virtio: don't leak bo on drm_gem_object_init failure
drm: bridge: dw-hdmi: fix input format/encoding from plat_data
drm: omap: use common OF graph helpers
drm: convert drivers to use drm_of_find_panel_or_bridge
drm: convert drivers to use of_graph_get_remote_node
...
Dave Airlie [Mon, 10 Apr 2017 21:40:42 +0000 (07:40 +1000)]
Backmerge tag 'v4.11-rc6' into drm-next
Linux 4.11-rc6
drm-misc needs 4.11-rc5, may as well fix conflicts with rc6.
Dave Airlie [Mon, 10 Apr 2017 21:31:18 +0000 (07:31 +1000)]
Merge branch 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux into drm-next
Just some bug fixes and vega10 updates for 4.12.
* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: fix fence memory leak in wait_all_fence V2
drm/amdgpu: fix "fix 64bit division"
drm/amd/powerplay: add fan controller table v11 support.
drm/amd/powerplay: port newest process pptable code for vega10.
drm/amdgpu: set vm size and block size by individual gmc by default (v3)
drm/amdgpu: Avoid overflows/divide-by-zero in latency_watermark calculations.
drm/amdgpu: Make display watermark calculations more accurate
drm/radeon: fix typo in bandwidth calculation
drm/radeon: Refuse to migrate a prime BO to VRAM. (v2)
drm/radeon: Maintain prime import/export refcount for BOs
drm/amdgpu: Refuse to pin or change acceptable domains of prime BOs to VRAM. (v2)
drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)
drm/radeon: Fail fb creation from imported dma-bufs.
Dave Airlie [Mon, 10 Apr 2017 21:28:01 +0000 (07:28 +1000)]
Merge tag 'drm-intel-testing-2017-04-03' of git://anongit.freedesktop.org/git/drm-intel into drm-next
Last 4.12 feature pile:
GVT updates:
- Add mdev attribute group for per-vgpu info
- Time slice based vGPU scheduling QoS support (Gao Ping)
- Initial KBL support for E3 server (Han Xu)
- other misc.
i915:
- lots and lots of small fixes and improvements all over
- refactor fw_domain code (Chris Wilson)
- improve guc code (Oscar Mateo)
- refactor cursor/sprite code, precompute more for less overhead in
the critical path (Ville)
- refactor guc/huc fw loading code a bit (Michal Wajdeczko)
* tag 'drm-intel-testing-2017-04-03' of git://anongit.freedesktop.org/git/drm-intel: (121 commits)
drm/i915: Update DRIVER_DATE to
20170403
drm/i915: Clear gt.active_requests before checking idle status
drm/i915/uc: Drop use of MISSING_CASE on trivial enums
drm/i915: make a few DDI functions static
drm/i915: Combine reset_all_global_seqno() loops into one
drm/i915: Remove redudant wait for each engine to idle from seqno wrap
drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()
drm/i915: Move retire-requests into i915_gem_wait_for_idle()
drm/i915/uc: Move fw path check to fetch_uc_fw()
drm/i915/huc: Remove unused intel_huc_fini()
drm/i915/uc: Add intel_uc_fw_fini()
drm/i915/uc: Add intel_uc_fw_type_repr()
drm/i915/uc: Move intel_uc_fw_status_repr() to intel_uc.h
drivers: gpu: drm: i915L intel_lpe_audio: Fix kerneldoc comments
drm/i915: Suppress busy status for engines if wedged
drm/i915: Do request retirement before marking engines as wedged
drm/i915: Drop verbose and archaic "ring" from our internal engine names
drm/i915: Use a dummy timeline name for a signaled fence
drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex
drm/i915/guc: Take enable_guc_loading check out of GEM core code
...
Dave Airlie [Mon, 10 Apr 2017 20:32:11 +0000 (06:32 +1000)]
Merge branch 'drm-next-4.12' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
This series is MT2701 DRM support.
* 'drm-next-4.12' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: add support for Mediatek SoC MT2701
drm/mediatek: update DSI sub driver flow for sending commands to panel
drm/mediatek: add non-continuous clock mode and EOT packet control
drm/mediatek: add dsi transfer function
drm/mediatek: add dsi interrupt control
drm/mediatek: cleaning up and refine
drm/mediatek: update display module connections
drm/mediatek: add BLS component
drm/mediatek: add shadow register support
drm/mediatek: add *driver_data for different hardware settings
drm/mediatek: add helpers for coverting from the generic components
dt-bindings: display: mediatek: update supported chips
Michal Wajdeczko [Mon, 10 Apr 2017 12:17:47 +0000 (12:17 +0000)]
drm/i915: Don't allow overuse of __intel_wait_for_register_fw()
This function should not be called with long timeouts in atomic context.
Annotate it as might_sleep if timeout is longer than 10us.
v2: fix comment (Michal)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170410121747.209200-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Michal Wajdeczko [Mon, 10 Apr 2017 09:38:17 +0000 (09:38 +0000)]
drm/i915: Drop const qualifiers from params in wait_for_register()
These params are passed by value, const qualifiers are ignored any way.
While around, unify timeout_ms type from long to int.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170410093817.151280-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Fri, 7 Apr 2017 19:42:20 +0000 (20:42 +0100)]
drm/i915: Use drm_i915_private directly from debugfs
The void *data passed to debugfs callbacks is actually the
drm_i915_private pointer, so use it thusly and avoid the to_i915(dev)
indirection.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407194220.821-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Linus Torvalds [Sun, 9 Apr 2017 16:49:44 +0000 (09:49 -0700)]
Linux 4.11-rc6
Linus Torvalds [Sun, 9 Apr 2017 16:10:02 +0000 (09:10 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"This is a set of CIFS/SMB3 fixes for stable.
There is another set of four SMB3 reconnect fixes for stable in
progress but they are still being reviewed/tested, so didn't want to
wait any longer to send these five below"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
Reset TreeId to zero on SMB2 TREE_CONNECT
CIFS: Fix build failure with smb2
Introduce cifs_copy_file_range()
SMB3: Rename clone_range to copychunk_range
Handle mismatched open calls
Linus Torvalds [Sun, 9 Apr 2017 16:05:25 +0000 (09:05 -0700)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"A number of ARM fixes:
- prevent oopses caused by dma_get_sgtable() and declared DMA
coherent memory
- fix boot failure on nommu caused by ID_PFR1 access
- a number of kprobes fixes from Jon Medhurst and Masami Hiramatsu"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8665/1: nommu: access ID_PFR1 only if CPUID scheme
ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory
arm: kprobes: Align stack to 8-bytes in test code
arm: kprobes: Fix the return address of multiple kretprobes
arm: kprobes: Skip single-stepping in recursing path if possible
arm: kprobes: Allow to handle reentered kprobe on single-stepping
Linus Torvalds [Sun, 9 Apr 2017 16:03:51 +0000 (09:03 -0700)]
Merge tag 'driver-core-4.11-rc6' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are 3 small fixes for 4.11-rc6.
One resolves a reported issue with sysfs files that NeilBrown found,
one is a documenatation fix for the stable kernel rules, and the last
is a small MAINTAINERS file update for kernfs"
* tag 'driver-core-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
MAINTAINERS: separate out kernfs maintainership
sysfs: be careful of error returns from ops->show()
Documentation: stable-kernel-rules: fix stable-tag format
projects / platform / kernel / linux-starfive.git / log