clk: samsung: s3c2410: Fix PLL rates

[ Upstream commit 179db533c08431f509a3823077549773d519358b ]

Rates declared in PLL rate tables should match exactly rates calculated from
the PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: rockchip: Prevent calculating mmc phase if clock rate is zero

[ Upstream commit 4bf59902b50012b1dddeeaa23b217d9c4956cdda ]

The MMC sample and drv clock for rockchip platforms are derived from
the bus clock output to the MMC/SDIO card. So it should never happens
that the clk rate is zero given it should inherits the clock rate from
its parent. If something goes wrong and makes the clock rate to be zero,
the calculation would be wrong but may still make the mmc tuning process
work luckily. However it makes people harder to debug when the following
data transfer is unstable.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: tegra: Fix pll_u rate configuration

[ Upstream commit c35b518f9ba06c9de79fb3ff62eed7462d804995 ]

Turns out latest upstream U-Boot does not configure/enable pll_u which
leaves it at some default rate of 500 kHz:

root@apalis-t30:~# cat /sys/kernel/debug/clk/clk_summary | grep pll_u
       pll_u                  3        3        0      500000          0

Of course this won't quite work leading to the following messages:

[    6.559593] usb 2-1: new full-speed USB device number 2 using tegra-
ehci
[   11.759173] usb 2-1: device descriptor read/64, error -110
[   27.119453] usb 2-1: device descriptor read/64, error -110
[   27.389217] usb 2-1: new full-speed USB device number 3 using tegra-
ehci
[   32.559454] usb 2-1: device descriptor read/64, error -110
[   47.929777] usb 2-1: device descriptor read/64, error -110
[   48.049658] usb usb2-port1: attempt power cycle
[   48.759475] usb 2-1: new full-speed USB device number 4 using tegra-
ehci
[   59.349457] usb 2-1: device not accepting address 4, error -110
[   59.509449] usb 2-1: new full-speed USB device number 5 using tegra-
ehci
[   70.069457] usb 2-1: device not accepting address 5, error -110
[   70.079721] usb usb2-port1: unable to enumerate USB device

Fix this by actually allowing the rate also being set from within
the Linux kernel.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: hisilicon: mark wdt_mux_p[] as const

[ Upstream commit df934cbcbff7afbc024bf05f02615917c61f6470 ]

The symbol is in the __initconst section but not marked init, which
caused a warning when building with LTO.

This makes it 'const' as was obviously intended.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c80dfd9bf54e ("clk: hisilicon: add CRG driver for Hi3516CV300 SoC")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: Don't show the incorrect clock phase

[ Upstream commit 1f9c63e8de3d7b377c9d74e4a17524cfb60e6384 ]

It's found that the clock phase output from clk_summary is
wrong compared to the actual phase reading from the register.

cat /sys/kernel/debug/clk/clk_summary | grep sdio_sample
sdio_sample     0        1        0 50000000          0 -22

It exposes an issue that clk core, clk_core_get_phase, always
returns the cached core->phase which should be either updated
by calling clk_set_phase or directly from the first place the
clk was registered.

When registering the clk, the core->phase geting from ->get_phase()
may return negative value indicating error. This is quite common
since the clk's phase may be highly related to its parent chain,
but it was temporarily orphan when registered, since its parent
chains hadn't be ready at that time, so the clk drivers decide to
return error in this case. However, if no clk_set_phase is called or
maybe the ->set_phase() isn't even implemented, the core->phase would
never be updated. This is wrong, and we should try to update it when
all its parent chains are settled down, like the way of updating clock
rate for that. But it's not deserved to complicate the code now and
just update it anyway when calling clk_core_get_phase, which would be
much simple and enough.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228

[ Upstream commit 4b0556a441dd37e598887215bc89b49a6ef525b3 ]

commit c420c1e4db22 ("clk: rockchip: Prevent calculating mmc phase
if clock rate is zero") catches one gremlin again for clk-rk3228.c
that the parent of SDMMC phase clock should be sclk_sdmmc0, but not
sclk_sdmmc. However, the naming of the sdmmc clocks varies in the
manual with the card clock having the 0 while the hclk is named
without appended 0. So standardize one one format to prevent
confusion, as there also is only one (non-sdio) mmc controller on
the soc.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: samsung: i2s: Ensure the RCLK rate is properly determined

[ Upstream commit 647d04f8e07afc7c3b7a42b3ee01a8b28db29631 ]

If the RCLK mux clock configuration is specified in DT and no set_sysclk()
callback is used in the sound card driver the sclk_srcrate field will remain
set to 0, leading to an incorrect PSR divider setting.
To fix this the frequency value is retrieved from the CLK_I2S_RCLK_SRC clock,
so the actual RCLK mux selection is taken into account.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: create TLV data for dapm widgets

[ Upstream commit bde8b3887add8368ecf0ca71117baf2fd56a6fc9 ]

This patch adds the change required to create the TLV data
for dapm widget kcontrols from topology. This also fixes the following
TLV read error shown in amixer while showing the card control contents.
"amixer: Control hw:1 element TLV read error: No such device or address"

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: samsung: odroid: Fix 32000 sample rate handling

[ Upstream commit 1d22c337dc8f3a25638f7262e7bcb5729a34d140 ]

In case of sample rates lower than 44100 currently there is too low MCLK
frequency set for the CODEC. Playback fails with following errors:

$ speaker-test -c2 -t sine -f 1500 -l2 -r 32000

Sine wave rate is 1500.0000Hz
Rate set to 32000Hz (requested 32000Hz)
Buffer size range from 128 to 131072
Period size range from 64 to 65536
Using max buffer size 131072
Periods = 4
Unable to set hw params for playback: Invalid argument
Setting of hwparams failed: Invalid argument

[  497.883700] max98090 1-0010: Invalid master clock frequency

To fix this the I2S root clock's frequency is increased, depending
on sampling rate.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rockchip: rk3288-hdmi-analog: Select needed codecs

[ Upstream commit b1d0db067fbe2598d62b248beea5d705a0ea7642 ]

The driver does not select all the codec drivers that needs.
Fix it by selecting the analog and HDMI codecs.

Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: hdmi-codec: Fix module unloading caused kernel crash

[ Upstream commit 5e558f8afaec8957932b1dbe5aeff800f9fc6957 ]

The hcp->chmap_info must not be freed up in the hdmi_codec_remove()
function as it leads to kernel crash due ALSA core's
pcm_chmap_ctl_private_free() is trying to free it up again when the card
destroyed via snd_card_free.

Commit cd6111b26280a ("ASoC: hdmi-codec: add channel mapping control")
should not have added the kfree(hcp->chmap_info); to the hdmi_codec_remove
function.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix frequency of Release WQE CQEs

[ Upstream commit 04673e38f56b30cd39b1fa0f386137d818b17781 ]

The driver controls when the hardware sends completions that communicate
consumption of elements from the WQ. This is done by setting a WQEC bit
on a WQE.

The current driver sets it on every Nth WQE posting. However, the driver
isn't clearing the bit if the WQE is reused. Thus, if the queue depth
isn't evenly divisible by N, with enough time, it can be set on every
element, creating a lot of overhead and risking CQ full conditions.

Correct by clearing the bit when not setting it on an Nth element.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing

[ Upstream commit 161df4f09987ae2e9f0f97f0b38eee298b4a39ff ]

During link bounce testing in a point-to-point topology, the host may
enter a soft lockup on the lpfc_worker thread:

    Call Trace:
     lpfc_work_done+0x1f3/0x1390 [lpfc]
     lpfc_do_work+0x16f/0x180 [lpfc]
     kthread+0xc7/0xe0
     ret_from_fork+0x3f/0x70

The driver was simultaneously setting a combination of flags that caused
lpfc_do_work()to effectively spin between slow path work and new event
data, causing the lockup.

Ensure in the typical wq completions, that new event data flags are set
if the slow path flag is running. The slow path will eventually
reschedule the wq handling.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix issue_lip if link is disabled

[ Upstream commit 2289e9598dde9705400559ca2606fb8c145c34f0 ]

The driver ignored checks on whether the link should be kept
administratively down after a link bounce. Correct the checks.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mvsas: fix wrong endianness of sgpio api

[ Upstream commit e75fba9c0668b3767f608ea07485f48d33c270cf ]

This patch fixes the byte order of the SGPIO api and brings it back in
sync with ledmon v0.80 and above.

[mkp: added missing SoB and fixed whitespace]

Signed-off-by: Wilfried Weissmann <wilfried.weissmann@gmx.at>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: Make SCSI Status CONDITION MET equivalent to GOOD

[ Upstream commit 1875ede02ed5e176a18dccbca84abc28d5b3e141 ]

The SCSI PRE-FETCH (10 or 16) command is present both on hard disks
and some SSDs. It is useful when the address of the next block(s) to
be read is known but it is not following the LBA of the current READ
(so read-ahead won't help). It returns two "good" SCSI Status values.
If the requested blocks have fitted (or will most likely fit (when
the IMMED bit is set)) into the disk's cache, it returns CONDITION
MET. If it didn't (or will not) fit then it returns GOOD status.

The goal of this patch is to stop the SCSI subsystem treating the
CONDITION MET SCSI status as an error. The current state makes the
PRE-FETCH command effectively unusable via pass-throughs.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: aacraid: Insure command thread is not recursively stopped

[ Upstream commit 1c6b41fb92936fa5facea464d5d7cbf855966d04 ]

If a recursive IOP_RESET is invoked, usually due to the eh_thread
handling errors after the first reset, be sure we flag that the command
thread has been stopped to avoid an Oops of the form;

 [ 336.620256] CPU: 28 PID: 1193 Comm: scsi_eh_0 Kdump: loaded Not tainted 4.14.0-49.el7a.ppc64le #1
 [ 336.620297] task: c000003fd630b800 task.stack: c000003fd61a4000
 [ 336.620326] NIP: c000000000176794 LR: c00000000013038c CTR: c00000000024bc10
 [ 336.620361] REGS: c000003fd61a7720 TRAP: 0300 Not tainted (4.14.0-49.el7a.ppc64le)
 [ 336.620395] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 22084022 XER: 20040000
 [ 336.620435] CFAR: c000000000130388 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1
 [ 336.620435] GPR00: c00000000013038c c000003fd61a79a0 c0000000014c7e00 0000000000000000
 [ 336.620435] GPR04: 000000000000000c 000000000000000c 9000000000009033 0000000000000477
 [ 336.620435] GPR08: 0000000000000477 0000000000000000 0000000000000000 c008000010f7d940
 [ 336.620435] GPR12: c00000000024bc10 c000000007a33400 c0000000001708a8 c000003fe3b881d8
 [ 336.620435] GPR16: c000003fe3b88060 c000003fd61a7d10 fffffffffffff000 000000000000001e
 [ 336.620435] GPR20: 0000000000000001 c000000000ebf1a0 0000000000000001 c000003fe3b88000
 [ 336.620435] GPR24: 0000000000000003 0000000000000002 c000003fe3b88840 c000003fe3b887e8
 [ 336.620435] GPR28: c000003fe3b88000 c000003fc8181788 0000000000000000 c000003fc8181700
 [ 336.620750] NIP [c000000000176794] exit_creds+0x34/0x160
 [ 336.620775] LR [c00000000013038c] __put_task_struct+0x8c/0x1f0
 [ 336.620804] Call Trace:
 [ 336.620817] [c000003fd61a79a0] [c000003fe3b88000] 0xc000003fe3b88000 (unreliable)
 [ 336.620853] [c000003fd61a79d0] [c00000000013038c] __put_task_struct+0x8c/0x1f0
 [ 336.620889] [c000003fd61a7a00] [c000000000171418] kthread_stop+0x1e8/0x1f0
 [ 336.620922] [c000003fd61a7a40] [c008000010f7448c] aac_reset_adapter+0x14c/0x8d0 [aacraid]
 [ 336.620959] [c000003fd61a7b00] [c008000010f60174] aac_eh_host_reset+0x84/0x100 [aacraid]
 [ 336.621010] [c000003fd61a7b30] [c000000000864f24] scsi_try_host_reset+0x74/0x180
 [ 336.621046] [c000003fd61a7bb0] [c000000000867ac0] scsi_eh_ready_devs+0xc00/0x14d0
 [ 336.625165] [c000003fd61a7ca0] [c0000000008699e0] scsi_error_handler+0x550/0x730
 [ 336.632101] [c000003fd61a7dc0] [c000000000170a08] kthread+0x168/0x1b0
 [ 336.639031] [c000003fd61a7e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4
 [ 336.645971] Instruction dump:
 [ 336.648743] 384216a0 7c0802a6 fbe1fff8 f8010010 f821ffd1 7c7f1b78 60000000 60000000
 [ 336.657056] 39400000 e87f0838 f95f0838 7c0004ac <7d401828> 314affff 7d40192d 40c2fff4
 [ 336.663997] -[ end trace 4640cf8d4945ad95 ]-

So flag when the thread is stopped by setting the thread pointer to NULL.

Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled

[ Upstream commit 89d0c804392bb962553f23dc4c119d11b6bd1675 ]

iscsi tcp will first send out data, then calculate and send data
digest. If we don't have BDI_CAP_STABLE_WRITES, the page cache will be
written in spite of the on going writeback. Consequently, wrong digest
will be got and sent to target.

To fix this, set BDI_CAP_STABLE_WRITES when data digest is enabled
in iscsi_tcp .slave_configure callback.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Acked-by: Chris Leech <cleech@redhat.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sd: Keep disk read-only when re-reading partition

[ Upstream commit 20bd1d026aacc5399464f8328f305985c493cde3 ]

If the read-only flag is true on a SCSI disk, re-reading the partition
table sets the flag back to false.

To observe this bug, you can run:

1. blockdev --setro /dev/sda
2. blockdev --rereadpt /dev/sda
3. blockdev --getro /dev/sda

This commit reads the disk's old state and combines it with the device
disk-reported state rather than unconditionally marking it as RW.

Reported-by: Li Ning <lining916740672@icloud.com>
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM

[ Upstream commit 864449eea7c600596e305ffdc4a6a846414b222c ]

The firmware event workqueue should not be marked as WQ_MEM_RECLAIM
as it's doesn't need to make forward progress under memory pressure.
In the current state it will result in a deadlock if the device had been
forcefully removed.

Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qedi: Fix kernel crash during port toggle

[ Upstream commit 967823d6c3980a30e214b92bfe6a101e7b46d025 ]

BUG: unable to handle kernel NULL pointer dereference at 0000000000000100

[  985.596918] IP: _raw_spin_lock_bh+0x17/0x30
[  985.601581] PGD 0 P4D 0
[  985.604405] Oops: 0002 [#1] SMP
:
[  985.704533] CPU: 16 PID: 1156 Comm: qedi_thread/16 Not tainted 4.16.0-rc2 #1
[  985.712397] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.4.3 01/17/2017
[  985.720747] RIP: 0010:_raw_spin_lock_bh+0x17/0x30
[  985.725996] RSP: 0018:ffffa4b1c43d3e10 EFLAGS: 00010246
[  985.731823] RAX: 0000000000000000 RBX: ffff94a31bd03000 RCX: 0000000000000000
[  985.739783] RDX: 0000000000000001 RSI: ffff94a32fa16938 RDI: 0000000000000100
[  985.747744] RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000a33
[  985.755703] R10: 0000000000000000 R11: ffffa4b1c43d3af0 R12: 0000000000000000
[  985.763662] R13: ffff94a301f40818 R14: 0000000000000000 R15: 000000000000000c
[  985.771622] FS:  0000000000000000(0000) GS:ffff94a32fa00000(0000) knlGS:0000000000000000
[  985.780649] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  985.787057] CR2: 0000000000000100 CR3: 000000067a009006 CR4: 00000000001606e0
[  985.795017] Call Trace:
[  985.797747]  qedi_fp_process_cqes+0x258/0x980 [qedi]
[  985.803294]  qedi_percpu_io_thread+0x10f/0x1b0 [qedi]
[  985.808931]  kthread+0xf5/0x130
[  985.812434]  ? qedi_free_uio+0xd0/0xd0 [qedi]
[  985.817298]  ? kthread_bind+0x10/0x10
[  985.821372]  ? do_syscall_64+0x6e/0x1a0

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla4xxx: skip error recovery in case of register disconnect.

[ Upstream commit 1bc5ad3a6acdcf56f83272f2de1cd2389ea9e9e2 ]

A system crashes when continuously removing/re-adding the storage
controller.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: aacraid: fix shutdown crash when init fails

[ Upstream commit 00c20cdc79259c6c5bf978b21af96c2d3edb646d ]

When aacraid init fails with "AAC0: adapter self-test failed.", shutdown
leads to UBSAN warning and then oops:

[154316.118423] ================================================================================
[154316.118508] UBSAN: Undefined behaviour in drivers/scsi/scsi_lib.c:2328:27
[154316.118566] member access within null pointer of type 'struct Scsi_Host'
[154316.118631] CPU: 2 PID: 14530 Comm: reboot Tainted: G        W        4.15.0-dirty #89
[154316.118701] Hardware name: Hewlett Packard HP NetServer/HP System Board, BIOS 4.06.46 PW 06/25/2003
[154316.118774] Call Trace:
[154316.118848]  dump_stack+0x48/0x65
[154316.118916]  ubsan_epilogue+0xe/0x40
[154316.118976]  __ubsan_handle_type_mismatch+0xfb/0x180
[154316.119043]  scsi_block_requests+0x20/0x30
[154316.119135]  aac_shutdown+0x18/0x40 [aacraid]
[154316.119196]  pci_device_shutdown+0x33/0x50
[154316.119269]  device_shutdown+0x18a/0x390
[...]
[154316.123435] BUG: unable to handle kernel NULL pointer dereference at 000000f4
[154316.123515] IP: scsi_block_requests+0xa/0x30

This is because aac_shutdown() does

        struct Scsi_Host *shost = pci_get_drvdata(dev);
        scsi_block_requests(shost);

and that assumes shost has been assigned with pci_set_drvdata().

However, pci_set_drvdata(pdev, shost) is done in aac_probe_one() far
after bailing out with error from calling the init function
((*aac_drivers[index].init)(aac)), and when the init function fails, no
error is returned from aac_probe_one() so PCI layer assumes there is
driver attached, and tries to shut it down later.

Fix it by returning error from aac_probe_one() when card-specific init
function fails.

This fixes reboot on my HP NetRAID-4M with dead battery.

Signed-off-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qedi: Fix truncation of CHAP name and secret

[ Upstream commit 1683ce57f568c7c92d53e9234624a53554a29cd5 ]

The data in NVRAM is not guaranteed to be NUL terminated.  Since
snprintf expects byte-stream to accommodate null byte, the CHAP secret
is truncated.  Use sprintf instead of snprintf to fix the truncation of
CHAP name and secret.

Signed-off-by: Andrew Vasquez <andrew.vasquez@cavium.com>
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Chris Leech <cleech@redhat.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: storvsc: Increase cmd_per_lun for higher speed devices

[ Upstream commit cabe92a55e3a12005a4ac4d3954c9a174b0efe2a ]

Increase cmd_per_lun to allow more I/Os in progress per device,
particularly for NVMe's.  The Hyper-V host side can handle the higher
count with no issues.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()

[ Upstream commit c02189e12ce3bf3808cb880569d3b10249f50bd9 ]

A left shift must shift less than the bit width of the left argument.
Avoid triggering undefined behavior if ha->mbx_count == 32.

This patch avoids that UBSAN reports the following complaint:

UBSAN: Undefined behaviour in drivers/scsi/qla2xxx/qla_isr.c:275:14
shift exponent 32 is too large for 32-bit type 'int'
Call Trace:
 dump_stack+0x4e/0x6c
 ubsan_epilogue+0xd/0x3b
 __ubsan_handle_shift_out_of_bounds+0x112/0x14c
 qla2x00_mbx_completion+0x1c5/0x25d [qla2xxx]
 qla2300_intr_handler+0x1ea/0x3bb [qla2xxx]
 qla2x00_mailbox_command+0x77b/0x139a [qla2xxx]
 qla2x00_mbx_reg_test+0x83/0x114 [qla2xxx]
 qla2x00_chip_diag+0x354/0x45f [qla2xxx]
 qla2x00_initialize_adapter+0x2c2/0xa4e [qla2xxx]
 qla2x00_probe_one+0x1681/0x392e [qla2xxx]
 pci_device_probe+0x10b/0x1f1
 driver_probe_device+0x21f/0x3a4
 __driver_attach+0xa9/0xe1
 bus_for_each_dev+0x6e/0xb5
 driver_attach+0x22/0x3c
 bus_add_driver+0x1d1/0x2ae
 driver_register+0x78/0x130
 __pci_register_driver+0x75/0xa8
 qla2x00_module_init+0x21b/0x267 [qla2xxx]
 do_one_initcall+0x5a/0x1e2
 do_init_module+0x9d/0x285
 load_module+0x20db/0x38e3
 SYSC_finit_module+0xa8/0xbc
 SyS_finit_module+0x9/0xb
 do_syscall_64+0x77/0x271
 entry_SYSCALL64_slow_path+0x25/0x25

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()

[ Upstream commit a7043e9529f3c367cc4d82997e00be034cbe57ca ]

My static checker complains about an out of bounds read:

    drivers/message/fusion/mptctl.c:2786 mptctl_hp_targetinfo()
    error: buffer overflow 'hd->sel_timeout' 255 <= u32max.

It's true that we probably should have a bounds check here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sym53c8xx_2: iterator underflow in sym_getsync()

[ Upstream commit e6f791d95313c85f3dd4a26141e28e50ae9aa0ae ]

We wanted to exit the loop with "div" set to zero, but instead, if we
don't hit the break then "div" is -1 when we finish the loop.  It leads
to an array underflow a few lines later.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: bnx2fc: Fix check in SCSI completion handler for timed out request

[ Upstream commit ecf7ff49945f5741fa1da112f994939f942031d3 ]

When a request times out we set the io_req flag BNX2FC_FLAG_IO_COMPL so
that if a subsequent completion comes in on that task ID we will ignore
it.  The issue is that in the check for this flag there is a missing
return so we will continue to process a request which may have already
been returned to the ownership of the SCSI layer.  This can cause
unpredictable results.

Solution is to add in the missing return.

[mkp: typo plus title shortening]

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: Enable quirk to ignore sending WRITE_SAME command

[ Upstream commit 84af7e8b895088d89f246d6b0f82717fafdebf61 ]

WRITE_SAME command is not supported by UFS. Enable a quirk for the upper
level drivers to not send WRITE SAME command.

[mkp: botched patch, applied by hand]

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix memory corruption during hba reset test

[ Upstream commit 2ce87cc5b269510de9ca1185ca8a6e10ec78c069 ]

This patch fixes memory corrpution while performing HBA Reset test.

Following stack trace is seen:

[  466.397219] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[  466.433669] IP: [<ffffffffc06f5dd0>] qlt_free_session_done+0x260/0x5f0 [qla2xxx]
[  466.467731] PGD 0
[  466.476718] Oops: 0000 [#1] SMP

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: fix an out of bound write

[ Upstream commit 4a8842de8db4953fdda7866626b78b12fb8adb97 ]

cpu_msix_table is allocated to store online cpus, but pci_irq_get_affinity
may return cpu_possible_mask which is then used to access cpu_msix_table.
That causes bad user experience.  Fix limits access to only online cpus,
I've also added an additional test to protect from an unlikely change in
cpu_online_mask.

[mkp: checkpatch]

Fixes: 1d55abc0e98a ("scsi: mpt3sas: switch to pci_alloc_irq_vectors")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: inside-secure - fix the invalidation step during cra_exit

[ Upstream commit b7007dbccd92f7b8c00e590020bee542a48c6a2c ]

When exiting a transformation, the cra_exit() helper is called in each
driver providing one. The Inside Secure SafeXcel driver has one, which
is responsible of freeing some areas and of sending one invalidation
request to the crypto engine, to invalidate the context that was used
during the transformation.

We could see in some setups (when lots of transformations were being
used with a short lifetime, and hence lots of cra_exit() calls) NULL
pointer dereferences and other weird issues. All these issues were
coming from accessing the tfm context.

The issue is the invalidation request completion is checked using a
wait_for_completion_interruptible() call in both the cipher and hash
cra_exit() helpers. In some cases this was interrupted while the
invalidation request wasn't processed yet. And then cra_exit() returned,
and its caller was freeing the tfm instance. Only then the request was
being handled by the SafeXcel driver, which lead to the said issues.

This patch fixes this by using wait_for_completion() calls in these
specific cases.

Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss

[ Upstream commit 7c73cf4cc2ac16465f5102437dc0a12d66671bd6 ]

The MODULE_ALIAS is required to enable the sun4i-ss driver to load
automatically when built at a module. Tested on a Cubietruck.

Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: inside-secure - fix the extra cache computation

[ Upstream commit c1a8fa6e240ed4b99778d48ab790743565cb61c8 ]

This patch fixes the extra cache computation when the queued data is a
multiple of a block size. This fixes the hash support in some cases.

Fixes: 809778e02cd4 ("crypto: inside-secure - fix hash when length is a multiple of a block")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: inside-secure - fix the cache_len computation

[ Upstream commit 666a9c70b04fccabde5cea5e680ae1ae92460a62 ]

This patch fixes the cache length computation as cache_len could end up
being a negative value. The check between the queued size and the
block size is updated to reflect the caching mechanism which can cache
up to a full block size (included!).

Fixes: 809778e02cd4 ("crypto: inside-secure - fix hash when length is a multiple of a block")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: inside-secure - do not process request if no command was issued

[ Upstream commit 95831ceafc0de7d94a5fe86ebb1c2042317cc2cd ]

This patch adds a check in the SafeXcel dequeue function, to avoid
processing request further if no hardware command was issued. This can
happen in certain cases where the ->send() function caches all the data
that would have been send.

Fixes: 809778e02cd4 ("crypto: inside-secure - fix hash when length is a multiple of a block")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - don't disable interrupts while setting up debugfs

[ Upstream commit 79eb382b5e06a6dca5806465d7195d686a463ab0 ]

I don't why we need take a single write lock and disable interrupts
while setting up debugfs. This is what what happens when we try anyway:

|ccp 0000:03:00.2: enabling device (0000 -> 0002)
|BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:69
|in_atomic(): 1, irqs_disabled(): 1, pid: 3, name: kworker/0:0
|irq event stamp: 17150
|hardirqs last  enabled at (17149): [<0000000097a18c49>] restore_regs_and_return_to_kernel+0x0/0x23
|hardirqs last disabled at (17150): [<000000000773b3a9>] _raw_write_lock_irqsave+0x1b/0x50
|softirqs last  enabled at (17148): [<0000000064d56155>] __do_softirq+0x3b8/0x4c1
|softirqs last disabled at (17125): [<0000000092633c18>] irq_exit+0xb1/0xc0
|CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.16.0-rc2+ #30
|Workqueue: events work_for_cpu_fn
|Call Trace:
| dump_stack+0x7d/0xb6
| ___might_sleep+0x1eb/0x250
| down_write+0x17/0x60
| start_creating+0x4c/0xe0
| debugfs_create_dir+0x9/0x100
| ccp5_debugfs_setup+0x191/0x1b0
| ccp5_init+0x8a7/0x8c0
| ccp_dev_init+0xb8/0xe0
| sp_init+0x6c/0x90
| sp_pci_probe+0x26e/0x590
| local_pci_probe+0x3f/0x90
| work_for_cpu_fn+0x11/0x20
| process_one_work+0x1ff/0x650
| worker_thread+0x1d4/0x3a0
| kthread+0xfe/0x130
| ret_from_fork+0x27/0x50

If any locking is required, a simple mutex will do it.

Cc: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: atmel-aes - fix the keys zeroing on errors

[ Upstream commit 5d804a5157dbaa64872a675923ae87161165c66b ]

The Atmel AES driver uses memzero_explicit on the keys on error, but the
variable zeroed isn't the right one because of a typo. Fix this by using
the right variable.

Fixes: 89a82ef87e01 ("crypto: atmel-authenc - add support to authenc(hmac(shaX), Y(aes)) modes")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: inside-secure - wait for the request to complete if in the backlog

[ Upstream commit 4dc5475ae0375ea4f9283dfd9b2ddc91b20d4c4b ]

This patch updates the safexcel_hmac_init_pad() function to also wait
for completion when the digest return code is -EBUSY, as it would mean
the request is in the backlog to be processed later.

Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lmv: correctly iput lmo_root

[ Upstream commit 17556cdbe6ed70a6a20e597b228628f7f34387f8 ]

Commit 8f18c8a48b73 ("staging: lustre: lmv: separate master object
with master stripe") changed how lmo_root inodes were managed,
particularly when LMV_HASH_FLAG_MIGRATION is not set.
Previously lsm_md_oinfo[0].lmo_root was always a borrowed
inode reference and didn't need to by iput().
Since the change, that special case only applies when
LMV_HASH_FLAG_MIGRATION is set

In the upstream (lustre-release) version of this patch [Commit
60e07b972114 ("LU-4690 lod: separate master object with master
stripe")] the for loop in the lmv_unpack_md() was changed to count
from 0 and to ignore entry 0 if LMV_HASH_FLAG_MIGRATION is set.
In the patch that got applied to Linux, that change was missing,
so lsm_md_oinfo[0].lmo_root is never iput().
This results in a "VFS: Busy inodes" warning at unmount.

Fixes: 8f18c8a48b73 ("staging: lustre: lmv: separate master object with master stripe")
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Use constants from ieee80211_eid instead of literal ints.

[ Upstream commit dc13498ab47fdfae3cda4df712beb2e4244b3fe0 ]

The case statement in get_ap_information() should not use literal integers
to parse information element IDs when these values are provided by name
in 'enum ieee80211_eid' in the header 'linux/ieee80211.h'.

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr

[ Upstream commit e1a7418529e33bc4efc346324557251a16a3e79b ]

Currently the allocation of priv->oldaddr is not null checked which will
lead to subsequent errors when accessing priv->oldaddr.  Fix this with
a null pointer check and a return of -ENOMEM on allocation failure.

Detected with Coccinelle:
drivers/staging/rtl8192u/r8192U_core.c:1708:2-15: alloc with no test,
possible model on line 1723

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/eth: Fix incorrect casts

[ Upstream commit 75c583ab9709692a60871d4719006391cde8dc1d ]

The DPAA2 Ethernet driver incorrectly assumes virtual addresses
are always 64b long, which causes compiler errors when building
for a 32b platform.

Fix this by using explicit casts to uintptr_t where necessary.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix bug in osc_enter_cache_try

[ Upstream commit 2fab9faf9b27298c4536c1c1b14072ab18b8f80b ]

The lustre-release patch commit bdc5bb52c554 ("LU-4933 osc:
Automatically increase the max_dirty_mb") changed

-       if (cli->cl_dirty + PAGE_CACHE_SIZE <= cli->cl_dirty_max &&
+       if (cli->cl_dirty_pages < cli->cl_dirty_max_pages &&

When this patch landed in Linux a couple of years later, it landed as

-       if (cli->cl_dirty + PAGE_SIZE <= cli->cl_dirty_max &&
+       if (cli->cl_dirty_pages <= cli->cl_dirty_max_pages &&

which is clearly different ('<=' vs '<'), and allows cl_dirty_pages to
increase beyond cl_dirty_max_pages - which causes a latter assertion
to fails.

Fixes: 3147b268400a ("staging: lustre: osc: Automatically increase the max_dirty_mb")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Release resources on module_exit()

[ Upstream commit 626118b472d2eb45f83a0276a18d3e6a01c69f6a ]

In the current implementation, `rmmod snd_bcm2835` does not release
resources properly. It causes an oops when trying to list sound devices.

This commit fixes it.

The details WRT allocation / free are described below.

Device structure WRT allocation:

pdev
  \childdev[]
    \card
      \chip
        \pcm
        \ctl

Allocation / register sequence:

* childdev: devm_kzalloc      - freed during driver detach
* childdev: device_initialize - freed during device_unregister
* pdev: devres_alloc          - freed during driver detach
* childdev: device_add        - removed during device_unregister
* pdev, childdev: devres_add  - freed during driver detach
* card: snd_card_new          - freed during snd_card_free
* chip: kzalloc               - freed during kfree
* card, chip: snd_device_new  - freed during snd_device_free
* chip: new_pcm               - TODO: free pcm
* chip: new_ctl               - TODO: free ctl
* card: snd_card_register     - unregistered during snd_card_free

Free / unregister sequence:

* card: snd_card_free
* card, chip: snd_device_free
* childdev: device_unregister
* chip: kfree

Steps to reproduce the issue before this commit:

~~~~
$ rmmod snd_bcm2835
$ aplay -L
[  138.648130] Unable to handle kernel paging request at virtual address 7f1343c0
[  138.660415] pgd = ad8f0000
[  138.665567] [7f1343c0] *pgd=3864c811, *pte=00000000, *ppte=00000000
[  138.674887] Internal error: Oops: 7 [#1] SMP ARM
[  138.683571] Modules linked in: sha256_generic cfg80211 rfkill snd_pcm snd_timer
 snd fixed uio_pdrv_genirq uio ip_tables x_tables ipv6 [last unloaded: snd_bcm2835
]
[  138.706594] CPU: 3 PID: 463 Comm: aplay Tainted: G        WC       4.15.0-rc1-v
7+ #6
[  138.719833] Hardware name: BCM2835
[  138.726016] task: b877ac00 task.stack: aebec000
[  138.733408] PC is at try_module_get+0x38/0x24c
[  138.740813] LR is at snd_ctl_open+0x58/0x194 [snd]
[  138.748485] pc : [<801c4d5c>]    lr : [<7f0e6b2c>]    psr: 20000013
[  138.757709] sp : aebedd60  ip : aebedd88  fp : aebedd84
[  138.765884] r10: 00000000  r9 : 00000004  r8 : 7f0ed440
[  138.774040] r7 : b7e469b0  r6 : 7f0e6b2c  r5 : afd91900  r4 : 7f1343c0
[  138.783571] r3 : aebec000  r2 : 00000001  r1 : b877ac00  r0 : 7f1343c0
[  138.793084] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  138.803300] Control: 10c5387d  Table: 2d8f006a  DAC: 00000055
[  138.812064] Process aplay (pid: 463, stack limit = 0xaebec210)
[  138.820868] Stack: (0xaebedd60 to 0xaebee000)
[  138.828207] dd60: 00000000 b848d000 afd91900 00000000 b7e469b0 7f0ed440 aebedda4 aebedd88
[  138.842371] dd80: 7f0e6b2c 801c4d30 afd91900 7f0ea4dc 00000000 b7e469b0 aebeddcc aebedda8
[  138.856611] dda0: 7f0e250c 7f0e6ae0 7f0e2464 b8478ec0 b7e469b0 afd91900 7f0ea388 00000000
[  138.870864] ddc0: aebeddf4 aebeddd0 802ce590 7f0e2470 8090ab64 afd91900 afd91900 b7e469b0
[  138.885301] dde0: afd91908 802ce4e4 aebede1c aebeddf8 802c57b4 802ce4f0 afd91900 aebedea8
[  138.900110] de00: b7fa4c00 00000000 00000000 00000004 aebede3c aebede20 802c6ba8 802c56b4
[  138.915260] de20: aebedea8 00000000 aebedf5c 00000000 aebedea4 aebede40 802d9a68 802c6b58
[  138.930661] de40: b874ddd0 00000000 00000000 00000001 00000041 00000000 afd91900 aebede70
[  138.946402] de60: 00000000 00000000 00000002 b7e469b0 b8a87610 b8d6ab80 801852f8 00080000
[  138.962314] de80: aebedf5c aebedea8 00000001 80108464 aebec000 00000000 aebedf4c aebedea8
[  138.978414] dea0: 802dacd4 802d970c b8a87610 b8d6ab80 a7982bc6 00000009 af363019 b9231480
[  138.994617] dec0: 00000000 b8c038a0 b7e469b0 00000101 00000002 00000238 00000000 00000000
[  139.010823] dee0: 00000000 aebedee8 00080000 0000000f aebedf3c aebedf00 802ed7e4 80843f94
[  139.027025] df00: 00000003 00080000 b9231490 b9231480 00000000 00080000 af363000 00000000
[  139.043229] df20: 00000005 00000002 ffffff9c 00000000 00080000 ffffff9c af363000 00000003
[  139.059430] df40: aebedf94 aebedf50 802c6f70 802dac70 aebec000 00000000 00000001 00000000
[  139.075629] df60: 00020000 00000004 00000100 00000001 7ebe577c 0002e038 00000000 00000005
[  139.091828] df80: 80108464 aebec000 aebedfa4 aebedf98 802c7060 802c6e6c 00000000 aebedfa8
[  139.108025] dfa0: 801082c0 802c7040 7ebe577c 0002e038 7ebe577c 00080000 00000b98 e81c8400
[  139.124222] dfc0: 7ebe577c 0002e038 00000000 00000005 7ebe57e4 00a20af8 7ebe57f0 76f87394
[  139.140419] dfe0: 00000000 7ebe55c4 76ec88e8 76df1d9c 60000010 7ebe577c 00000000 00000000
[  139.156715] [<801c4d5c>] (try_module_get) from [<7f0e6b2c>] (snd_ctl_open+0x58/0x194 [snd])
[  139.173222] [<7f0e6b2c>] (snd_ctl_open [snd]) from [<7f0e250c>] (snd_open+0xa8/0x14c [snd])
[  139.189683] [<7f0e250c>] (snd_open [snd]) from [<802ce590>] (chrdev_open+0xac/0x188)
[  139.205465] [<802ce590>] (chrdev_open) from [<802c57b4>] (do_dentry_open+0x10c/0x314)
[  139.221347] [<802c57b4>] (do_dentry_open) from [<802c6ba8>] (vfs_open+0x5c/0x88)
[  139.236788] [<802c6ba8>] (vfs_open) from [<802d9a68>] (path_openat+0x368/0x944)
[  139.248270] [<802d9a68>] (path_openat) from [<802dacd4>] (do_filp_open+0x70/0xc4)
[  139.263731] [<802dacd4>] (do_filp_open) from [<802c6f70>] (do_sys_open+0x110/0x1d4)
[  139.279378] [<802c6f70>] (do_sys_open) from [<802c7060>] (SyS_open+0x2c/0x30)
[  139.290647] [<802c7060>] (SyS_open) from [<801082c0>] (ret_fast_syscall+0x0/0x28)
[  139.306021] Code: e3c3303f e5932004 e2822001 e5832004 (e5943000)
[  139.316265] ---[ end trace 7f3f7f6193b663ed ]---
[  139.324956] note: aplay[463] exited with preempt_count 1
~~~~

Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Michael Zoran <mzoran@crowfest.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Show what USB release number the xHC supports from protocol capablity

[ Upstream commit 0ee78c101425aae681c631ba59c6ac7f44b1d83a ]

xhci driver displays the supported xHC USB revision in a message during
driver load:

"Host supports USB 3.1 Enhanced SuperSpeed"

Get the USB minor revision number from the xhci protocol capability.
This will show the correct supported revisions for new USB 3.2 and later
hosts

Don't rely on the SBRN (serial bus revision number) register, it's often
showing 0x30 (USB3.0) for hosts that support USB 3.1

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: Add device ID for RTL8822BE

[ Upstream commit fed03fe7e55b7dc16077f672bd9d7bbe92b3a691 ]

The Asus Z370-I contains a Realtek RTL8822BE device with an associated
BT chip using a USB ID of 0b05:185c. This device is added to the driver.

Signed-off-by: Hon Weng Chong <honwchong@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: em28xx: USB bulk packet size fix

[ Upstream commit c7c7e8d7803406daa21e96d00c357de8b77b6764 ]

Hauppauge em28xx bulk devices exhibit continuity errors and corrupted
packets, when run in VMWare virtual machines. Unknown if other
manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected.

According to documentation the maximum packet multiplier for em28xx in bulk
transfer mode is 256 * 188 bytes. This changes the size of bulk transfers
to maximum supported value and have a bonus beneficial alignment.

Before:

After:

This sets up USB to expect just as many bytes as the em28xx is set to emit.

Successful usage under load afterwards natively and in both VMWare
and KVM/Qemu virtual machines.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: lgdt3306a: Fix module count mismatch on usb unplug

[ Upstream commit 835d66173a38538c072a7c393d02360dcfac8582 ]

When used as an i2c device there is a module usage count mismatch on
removal, preventing the driver from being used thereafter. dvb_attach
increments the usage count so it is properly balanced on removal.

On disconnect of Hauppauge SoloHD/DualHD before:

lsmod | grep lgdt3306a
lgdt3306a              28672  -1
i2c_mux                16384  1 lgdt3306a

On disconnect of Hauppauge SoloHD/DualHD after:

lsmod | grep lgdt3306a
lgdt3306a              28672  0
i2c_mux                16384  1 lgdt3306a

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: composite: fix incorrect handling of OS desc requests

[ Upstream commit 5d6ae4f0da8a64a185074dabb1b2f8c148efa741 ]

When handling an OS descriptor request, one of the first operations is
to zero out the request buffer using the wLength from the setup packet.
There is no bounds checking, so a wLength > 4096 would clobber memory
adjacent to the request buffer. Fix this by taking the min of wLength
and the request buffer length prior to the memset. While at it, define
the buffer length in a header file so that magic numbers don't appear
throughout the code.

When returning data to the host, the data length should be the min of
the wLength and the valid data we have to return. Currently we are
returning wLength, thus requests for a wLength greater than the amount
of data in the OS descriptor buffer would return invalid (albeit zero'd)
data following the valid descriptor data. Fix this by counting the
number of bytes when constructing the data and using this when
determining the length of the request.

Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: change comparison to bitshift when dealing with a mask

[ Upstream commit ac87e560f7c0f91b62012e9a159c0681a373b922 ]

Due to a typo, the mask was destroyed by a comparison instead of a bit
shift.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: Correct maximum value of CONFIG_USBIP_VHCI_HC_PORTS

[ Upstream commit 351a8d4837ae0d61744e64262c3a80ab92ff3e42 ]

Now that usbip supports USB3, the maximum number of ports allowed
on a hub is 15 (USB_SS_MAXPORTS), not 31 (USB_MAXCHILDREN).

Reported-by: Gianluigi Tiesi <sherpya@netfarm.it>
Reported-by: Borissh1983 <borissh1983@gmail.com>
References: https://bugs.debian.org/878866
Fixes: 1c9de5bf4286 ("usbip: vhci-hcd: Add USB3 SuperSpeed support")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: ffs: Execute copy_to_user() with USER_DS set

[ Upstream commit 4058ebf33cb0be88ca516f968eda24ab7b6b93e4 ]

When using a AIO read() operation on the function FS gadget driver a URB is
submitted asynchronously and on URB completion the received data is copied
to the userspace buffer associated with the read operation.

This is done from a kernel worker thread invoking copy_to_user() (through
copy_to_iter()). And while the user space process memory is made available
to the kernel thread using use_mm(), some architecture require in addition
to this that the operation runs with USER_DS set. Otherwise the userspace
memory access will fail.

For example on ARM64 with Privileged Access Never (PAN) and User Access
Override (UAO) enabled the following crash occurs.

Internal error: Accessing user space memory with fs=KERNEL_DS: 9600004f [#1] SMP
Modules linked in:
CPU: 2 PID: 1636 Comm: kworker/2:1 Not tainted 4.9.0-04081-g8ab2dfb-dirty #487
Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
Workqueue: events ffs_user_copy_worker
task: ffffffc87afc8080 task.stack: ffffffc87a00c000
PC is at __arch_copy_to_user+0x190/0x220
LR is at copy_to_iter+0x78/0x3c8
[...]
[<ffffff800847b790>] __arch_copy_to_user+0x190/0x220
[<ffffff80086f25d8>] ffs_user_copy_worker+0x70/0x130
[<ffffff80080b8c64>] process_one_work+0x1dc/0x460
[<ffffff80080b8f38>] worker_thread+0x50/0x4b0
[<ffffff80080bf5a0>] kthread+0xd8/0xf0
[<ffffff8008083680>] ret_from_fork+0x10/0x50

Address this by placing a set_fs(USER_DS) before of the copy operation
and revert it again once the copy operation has finished.

This patch is analogous to commit d7ffde35e31a ("vhost: use USER_DS in
vhost_worker thread") which addresses the same underlying issue.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS

[ Upstream commit 946ef68ad4e45aa048a5fb41ce8823ed29da866a ]

Some UDC drivers (like the DWC3) expect that the response to a setup()
request is queued from within the setup function itself so that it is
available as soon as setup() has completed.

Upon receiving a setup request the function fs driver creates an event that
is made available to userspace. And only once userspace has acknowledged
that event the response to the setup request is queued.

So it violates the requirement of those UDC drivers and random failures can
be observed. This is basically a race condition and if userspace is able to
read the event and queue the response fast enough all is good. But if it is
not, for example because other processes are currently scheduled to run,
the USB host that sent the setup request will observe an error.

To avoid this the gadget framework provides the USB_GADGET_DELAYED_STATUS
return code. If a setup() callback returns this value the UDC driver is
aware that response is not yet available and can uses the appropriate
methods to handle this case.

Since in the case of function fs the response will never be available when
the setup() function returns make sure that this status code is used.

This fixed random occasional failures that were previously observed on a
DWC3 based system under high system load.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: host: Fix transaction errors in host mode

[ Upstream commit 92a8dd26464e1f21f1d869ec53717bd2c1200d63 ]

Added missing GUSBCFG programming in host mode, which fixes
transaction errors issue on HiKey and Altera Cyclone V boards.

These field even if was programmed in device mode (in function
dwc2_hsotg_core_init_disconnected()) will be resetting to POR values
after core soft reset applied.
So, each time when switching to host mode required to set this field
to correct value.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: hcd: Fix host channel halt flow

[ Upstream commit a82c7abdf8fc3b09c4a0ed2eee6d43ecef2ccdb0 ]

According databook in Buffer and External DMA mode
non-split periodic channels can't be halted.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Fix interval type issue

[ Upstream commit 12814a3f8f9b247531d7863170cc82b3fe4218fd ]

The maximum value that unsigned char can hold is 255, meanwhile
the maximum value of interval is  2^(bIntervalMax-1)=2^15.

Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: zero usb device slot_id member when disabling and freeing a xhci slot

[ Upstream commit a400efe455f7b61ac9a801ac8d0d01f8c8d82dd5 ]

set udev->slot_id to zero when disabling and freeing the xhci slot.
Prevents usb core from calling xhci with a stale slot id.

xHC controller may be reset during resume to recover from some error.
All slots are unusable as they are disabled and freed.
xhci driver starts slot enumeration again from 1 in the order they are
enabled. In the worst case a stale udev->slot_id for one device matches
a newly enabled slot_id for a different device, causing us to
perform a action on the wrong device.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: Makefile: fix link error on randconfig

[ Upstream commit de948a74ad6f0eefddf36d765b8f2dd6df82caa0 ]

If building a kernel without FTRACE but with TRACING, dwc3.ko fails to
link due to missing trace events. Fix this by using the correct
Kconfig symbol on Makefile.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields

[ Upstream commit 0cab8d26d6e5e053b2bed3356992aaa71dc93628 ]

Update two GTXFIFOSIZ bit fields for the DWC_usb31 controller. TXFDEP
is a 15-bit value instead of 16-bit value, and bit 15 is TXFRAMNUM.

The GTXFIFOSIZ register for DWC_usb31 is as follows:
 +-------+-----------+----------------------------------+
 | BITS  | Name      | Description                      |
 +=======+===========+==================================+
 | 31:16 | TXFSTADDR | Transmit FIFOn RAM Start Address |
 | 15    | TXFRAMNUM | Asynchronous/Periodic TXFIFO     |
 | 14:0  | TXFDEP    | TXFIFO Depth                     |
 +-------+-----------+----------------------------------+

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: Add SoftReset PHY synchonization delay

[ Upstream commit fab3833338779e1e668bd58d1f76d601657304b8 ]

>From DWC_usb31 programming guide section 1.3.2, once DWC3_DCTL_CSFTRST
bit is cleared, we must wait at least 50ms before accessing the PHY
domain (synchronization delay).

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add native DSD support for Luxman DA-06

[ Upstream commit 71426535f49fe6034d0e0db77608b91a0c1a022d ]

Add native DSD support quirk for Luxman DA-06 DAC, by adding the
PID/VID 1852:5065.

Rename "is_marantz_denon_dac()" function to "is_itf_usb_dsd_2alts_dac()"
to cover broader device family sharing the same USB audio
implementation(*).
For the same reason, rename "is_teac_dsd_dac()" function to
"is_itf_usb_dsd_3alts_dac()".

(*)
These devices have the same USB controller "ITF-USB DSD", supplied by
INTERFACE Co., Ltd.
"ITF-USB DSD" USB controller has two patterns,

Pattern 1. (2 altsets version)
- Altset 0: for control
- Altset 1: for stream (S32)
- Altset 2: for stream (S32, DSD_U32)

Pattern 2. (3 altsets version)
- Altset 0: for control
- Altset 1: for stream (S16)
- Altset 2: for stream (S32)
- Altset 3: for stream (S32, DSD_U32)

"is_itf_usb_dsd_2alts_dac()" returns true, if the DAC has "Pattern 1"
USB controller, and "is_itf_usb_dsd_3alts_dac()" returns true, if
"Pattern2".

Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB

[ Upstream commit a41e0796396eeceff673af4a38feaee149c6ff86 ]

This WiFi/Bluetooth USB dongle uses a Realtek chipset, so, use btrtl for it.

Product information:
https://wikidevi.com/wiki/Edimax_EW-7611ULB

>From /sys/kernel/debug/usb/devices
T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=7392 ProdID=a611 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Edimax Wi-Fi N150 Bluetooth4.0 USB Adapter
S:  SerialNumber=00e04c000001
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723bu
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net-usb: add qmi_wwan if on lte modem wistron neweb d18q1

[ Upstream commit d4c4bc11353f3bea6754f7d21e3612c9f32d1d64 ]

This modem is embedded on dlink dwr-921 router.
    The oem configuration states:

    T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=1435 ProdID=0918 Rev= 2.32
    S:  Manufacturer=Android
    S:  Product=Android
    S:  SerialNumber=0123456789ABCDEF
    C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
    I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
    E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
    E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
    E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Tested on openwrt distribution

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/usb/qmi_wwan.c: Add USB id for lt4120 modem

[ Upstream commit f3d801baf118c9d452ee7c278df16880c892e669 ]

This is needed to support the modem found in HP EliteBook 820 G3.

Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM

[ Upstream commit d6c931ea32dc08ac2665bb5f009f9c40ad1bbdb3 ]

Scatter-gather needs to be disabled when using dma_declare_coherent_memory
and HCD_LOCAL_MEM. Andrea Righi made the equivalent fix for EHCI drivers
in commit 4307a28eb01284 "USB: EHCI: fix NULL pointer dererence in HCDs
that use HCD_LOCAL_MEM".

The following NULL pointer WARN_ON_ONCE triggered with OHCI drivers:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 49 at drivers/usb/core/hcd.c:1379 hcd_alloc_coherent+0x4c/0xc8
Modules linked in:
CPU: 0 PID: 49 Comm: usb-storage Not tainted 4.15.0+ #1014
Stack : 00000000 00000000 805a78d2 0000003a 81f5c2cc 8053d367 804d77fc 00000031
        805a3a08 00000563 81ee9400 805a0000 00000000 10058c00 81f61b10 805c0000
        00000000 00000000 805a0000 00d9038e 00000004 803ee818 00000006 312e3420
        805c0000 00000000 00000073 81f61958 00000000 00000000 802eb380 804fd538
        00000009 00000563 81ee9400 805a0000 00000002 80056148 00000000 805a0000
        ...
Call Trace:
[<578af360>] show_stack+0x74/0x104
[<2f3702c6>] __warn+0x118/0x120
[<ae93fc9e>] warn_slowpath_null+0x44/0x58
[<a891a517>] hcd_alloc_coherent+0x4c/0xc8
[<3578fa36>] usb_hcd_map_urb_for_dma+0x4d8/0x534
[<110bc94c>] usb_hcd_submit_urb+0x82c/0x834
[<02eb5baf>] usb_sg_wait+0x14c/0x1a0
[<ccd09e85>] usb_stor_bulk_transfer_sglist.part.1+0xac/0x124
[<87a5c34c>] usb_stor_bulk_srb+0x40/0x60
[<ff1792ac>] usb_stor_Bulk_transport+0x160/0x37c
[<b9e2709c>] usb_stor_invoke_transport+0x3c/0x500
[<004754f4>] usb_stor_control_thread+0x258/0x28c
[<22edf42e>] kthread+0x134/0x13c
[<a419ffd0>] ret_from_kernel_thread+0x14/0x1c
---[ end trace bcdb825805eefdcc ]---

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"

[ Upstream commit d56e57ca030c8b4296944a2ae61ac167bf979c07 ]

This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat:
enable clk in resume timing") because this driver also has runtime PM
and the commit 560869100b99 ("clk: renesas: cpg-mssr: Restore module
clocks during resume") will restore the clock on R-Car H3 environment.

If the xhci_plat_suspend() disables the clk, the system cannot enable
the clk in resume like the following behavior:

< In resume >
 - genpd_resume_noirq() runs and enable the clk (enable_count = 1)
 - cpg_mssr_resume_noirq() restores the clk register.
  -- Since the clk was disabled in suspend, cpg_mssr_resume_noirq()
     will disable the clk and keep the enable_count.
 - Even if xhci_plat_resume() calls clk_prepare_enable(), since
   the enable_count is 1, the clk will be not enabled.

After this patch is applied, the cpg-mssr driver will save the clk
as enable, so the clk will be enabled in resume.

Fixes: 835e4241e714 ("usb: host: xhci-plat: enable clk in resume timing")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name

[ Upstream commit 970656b3246d30955894951ed16bd658e42d8c24 ]

The two usb-otg regulators for imx7d-sdb are both called
"regulator-usb-otg1-vbus" and they effectively override each other.

This is most likely a copy-paste error.

Fixes: b877039aa1fe ("ARM: dts: imx7d-sdb: Adjust the regulator nodes")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usbnet: fix potential deadlock on 32bit hosts

[ Upstream commit 2695578b896aea472b2c0dcbe9d92daa71738484 ]

Marek reported a LOCKDEP issue occurring on 32bit host,
that we tracked down to the fact that usbnet could either
run from soft or hard irqs.

This patch adds u64_stats_update_begin_irqsave() and
u64_stats_update_end_irqrestore() helpers to solve this case.

[   17.768040] ================================
[   17.772239] WARNING: inconsistent lock state
[   17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted
[   17.783329] --------------------------------
[   17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[   17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[   17.798751]  (&syncp->seq#5){?.-.}, at: [<9b22e5f0>]
asix_rx_fixup_internal+0x188/0x288
[   17.806790] {IN-HARDIRQ-W} state was registered at:
[   17.811677]   tx_complete+0x100/0x208
[   17.815319]   __usb_hcd_giveback_urb+0x60/0xf0
[   17.819770]   xhci_giveback_urb_in_irq+0xa8/0x240
[   17.824469]   xhci_td_cleanup+0xf4/0x16c
[   17.828367]   xhci_irq+0xe74/0x2240
[   17.831827]   usb_hcd_irq+0x24/0x38
[   17.835343]   __handle_irq_event_percpu+0x98/0x510
[   17.840111]   handle_irq_event_percpu+0x1c/0x58
[   17.844623]   handle_irq_event+0x38/0x5c
[   17.848519]   handle_fasteoi_irq+0xa4/0x138
[   17.852681]   generic_handle_irq+0x18/0x28
[   17.856760]   __handle_domain_irq+0x6c/0xe4
[   17.860941]   gic_handle_irq+0x54/0xa0
[   17.864666]   __irq_svc+0x70/0xb0
[   17.867964]   arch_cpu_idle+0x20/0x3c
[   17.871578]   arch_cpu_idle+0x20/0x3c
[   17.875190]   do_idle+0x144/0x218
[   17.878468]   cpu_startup_entry+0x18/0x1c
[   17.882454]   start_kernel+0x394/0x400
[   17.886177] irq event stamp: 161912
[   17.889616] hardirqs last  enabled at (161912): [<7bedfacf>]
__netdev_alloc_skb+0xcc/0x140
[   17.897893] hardirqs last disabled at (161911): [<d58261d0>]
__netdev_alloc_skb+0x94/0x140
[   17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout
[   17.906116] softirqs last  enabled at (161904): [<387102ff>]
irq_enter+0x78/0x80
[   17.906123] softirqs last disabled at (161905): [<cf4c628e>]
irq_exit+0x134/0x158
[   17.925722].
[   17.925722] other info that might help us debug this:
[   17.933435]  Possible unsafe locking scenario:
[   17.933435].
[   17.940331]        CPU0
[   17.942488]        ----
[   17.944894]   lock(&syncp->seq#5);
[   17.948274]   <Interrupt>
[   17.950847]     lock(&syncp->seq#5);
[   17.954386].
[   17.954386]  *** DEADLOCK ***
[   17.954386].
[   17.962422] no locks held by swapper/0/0.

Fixes: c8b5d129ee29 ("net: usbnet: support 64bit stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc_acm: prevent race at write to acm while system resumes

[ Upstream commit b86b8eb6fecb5a4bac1ed0ca925c4082a61ea6e9 ]

ACM driver may accept data to transmit while system is not fully
resumed. In this case ACM driver buffers data and prepare URBs
on usb anchor list.
There is a little chance that two tasks put a char and initiate
acm_tty_flush_chars(). In such a case, driver will put one URB
twice on usb anchor list.
This patch also reset length of data before resue of a buffer.
This not only prevent sending rubbish, but also lower risc of race.

Without this patch we hit following kernel panic in one of our
stabilty/stress tests.

[   46.884442] *list_add double add*: new=ffff9b2ab7289330, prev=ffff9b2ab7289330, next=ffff9b2ab81e28e0.
[   46.884476] Modules linked in: hci_uart btbcm bluetooth rfkill_gpio igb_avb(O) cfg80211 snd_soc_sst_bxt_tdf8532 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_sst_acpi snd_soc_sst_match snd_hda_ext_core snd_hda_core trusty_timer trusty_wall trusty_log trusty_virtio trusty_ipc trusty_mem trusty_irq trusty virtio_ring virtio intel_ipu4_mmu_bxtB0 lib2600_mod_bxtB0 intel_ipu4_isys_mod_bxtB0 lib2600psys_mod_bxtB0 intel_ipu4_psys_mod_bxtB0 intel_ipu4_mod_bxtB0 intel_ipu4_wrapper_bxtB0 intel_ipu4_acpi videobuf2_dma_contig as3638 dw9714 lm3643 crlmodule smiapp smiapp_pll
[   46.884480] CPU: 1 PID: 33 Comm: kworker/u8:1 Tainted: G     U  W  O    4.9.56-quilt-2e5dc0ac-g618ed69ced6e-dirty #4
[   46.884489] Workqueue: events_unbound flush_to_ldisc
[   46.884494]  ffffb98ac012bb08 ffffffffad3e82e5 ffffb98ac012bb58 0000000000000000
[   46.884497]  ffffb98ac012bb48 ffffffffad0a23d1 00000024ad6374dd ffff9b2ab7289330
[   46.884500]  ffff9b2ab81e28e0 ffff9b2ab7289330 0000000000000002 0000000000000000
[   46.884501] Call Trace:
[   46.884507]  [<ffffffffad3e82e5>] dump_stack+0x67/0x92
[   46.884511]  [<ffffffffad0a23d1>] __warn+0xd1/0xf0
[   46.884513]  [<ffffffffad0a244f>] warn_slowpath_fmt+0x5f/0x80
[   46.884516]  [<ffffffffad407443>] __list_add+0xb3/0xc0
[   46.884521]  [<ffffffffad71133c>] *usb_anchor_urb*+0x4c/0xa0
[   46.884524]  [<ffffffffad782c6f>] *acm_tty_flush_chars*+0x8f/0xb0
[   46.884527]  [<ffffffffad782cd1>] *acm_tty_put_char*+0x41/0x100
[   46.884530]  [<ffffffffad4ced34>] tty_put_char+0x24/0x40
[   46.884533]  [<ffffffffad4d3bf5>] do_output_char+0xa5/0x200
[   46.884535]  [<ffffffffad4d3e98>] __process_echoes+0x148/0x290
[   46.884538]  [<ffffffffad4d654c>] n_tty_receive_buf_common+0x57c/0xb00
[   46.884541]  [<ffffffffad4d6ae4>] n_tty_receive_buf2+0x14/0x20
[   46.884543]  [<ffffffffad4d9662>] tty_ldisc_receive_buf+0x22/0x50
[   46.884545]  [<ffffffffad4d9c05>] flush_to_ldisc+0xc5/0xe0
[   46.884549]  [<ffffffffad0bcfe8>] process_one_work+0x148/0x440
[   46.884551]  [<ffffffffad0bdc19>] worker_thread+0x69/0x4a0
[   46.884554]  [<ffffffffad0bdbb0>] ? max_active_store+0x80/0x80
[   46.884556]  [<ffffffffad0c2e10>] kthread+0x110/0x130
[   46.884559]  [<ffffffffad0c2d00>] ? kthread_park+0x60/0x60
[   46.884563]  [<ffffffffadad9917>] ret_from_fork+0x27/0x40
[   46.884566] ---[ end trace 3bd599058b8a9eb3 ]---

Signed-off-by: Dominik Bozek <dominikx.bozek@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()

[ Upstream commit 755d739534f998d92e348fba8ffb0478416576e7 ]

We should call dwc2_hsotg_enqueue_setup() after properly
setting lx_state. Because it may cause error-out from
dwc2_hsotg_enqueue_setup() due to wrong value in lx_state.

Issue can be reproduced by loading driver while connected
A-Connector (start in A-HOST mode) then disconnect A-Connector
to switch to B-DEVICE.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: fsl_udc_core: fix ep valid checks

[ Upstream commit 20c63f4089cceab803438c383631963e34c4d8e5 ]

Clang reports the following warning:
  drivers/usb/gadget/udc/fsl_udc_core.c:1312:10: warning: address of array
  'ep->name' will always evaluate to 'true' [-Wpointer-bool-conversion]
        if (ep->name)
        ~~  ~~~~^~~~

It seems that the authors intention was to check if the ep has been
configured through struct_ep_setup. Check whether struct usb_ep name
pointer has been set instead.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: core: Fix use-after-free of usb_request

[ Upstream commit e74bd4d358e5455233f1dcc3975425905b270b91 ]

Driver is tracing usb_request after freeing it.
Fix it by changing the order.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: omap: don't miss events during suspend/resume

[ Upstream commit c49f63055e252810e5d6c83a4943b18db16b3cd8 ]

The USB cable state can change during suspend/resume
so be sure to check and update the extcon state.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: Undo PHY init if soft reset fails

[ Upstream commit 00b42170c86f90ac9dea83a7dfcd3f0c38098fe2 ]

In this function, we init the USB2 and USB3 PHYs, but if soft reset
times out, we don't unwind this.

Noticed by inspection.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: fix bFirstInterface in composite gadget

[ Upstream commit 8813a59ed892305b5ac1b5b901740b1ad4b5fefa ]

If there are multiple functions associated with a configuration, then
the UAC2 interfaces may not start at zero.  Set the correct first
interface number in the association descriptor so that the audio
interfaces are enumerated correctly in this case.

Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kexec: Avoid double free_page() upon do_kexec_load() failure

commit a466ef76b815b86748d9870ef2a430af7b39c710 upstream.

>From ff82bedd3e12f0d3353282054ae48c3bd8c72012 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Wed, 9 May 2018 12:12:39 +0900
Subject: x86/kexec: Avoid double free_page() upon do_kexec_load() failure

syzbot is reporting crashes after memory allocation failure inside
do_kexec_load() [1]. This is because free_transition_pgtable() is called
by both init_transition_pgtable() and machine_kexec_cleanup() when memory
allocation failed inside init_transition_pgtable().

Regarding 32bit code, machine_kexec_free_page_tables() is called by both
machine_kexec_alloc_page_tables() and machine_kexec_cleanup() when memory
allocation failed inside machine_kexec_alloc_page_tables().

Fix this by leaving the error handling to machine_kexec_cleanup()
(and optionally setting NULL after free_page()).

[1] https://syzkaller.appspot.com/bug?id=91e52396168cf2bdd572fe1e1bc0bc645c1c6b40

Fixes: f5deb79679af6eb4 ("x86: kexec: Use one page table in x86_64 machine_kexec")
Fixes: 92be3d6bdf2cb349 ("kexec/i386: allocate page table pages dynamically")
Reported-by: syzbot <syzbot+d96f60296ef613fe1d69@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: prudo@linux.vnet.ibm.com
Cc: Huang Ying <ying.huang@intel.com>
Cc: syzkaller-bugs@googlegroups.com
Cc: takahiro.akashi@linaro.org
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: akpm@linux-foundation.org
Cc: dyoung@redhat.com
Cc: kirill.shutemov@linux.intel.com
Link: https://lkml.kernel.org/r/201805091942.DGG12448.tMFVFSJFQOOLHO@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hfsplus: stop workqueue when fill_super() failed

commit 66072c29328717072fd84aaff3e070e3f008ba77 upstream.

syzbot is reporting ODEBUG messages at hfsplus_fill_super() [1].  This
is because hfsplus_fill_super() forgot to call cancel_delayed_work_sync().

As far as I can see, it is hfsplus_mark_mdb_dirty() from
hfsplus_new_inode() in hfsplus_fill_super() that calls
queue_delayed_work().  Therefore, I assume that hfsplus_new_inode() does
not fail if queue_delayed_work() was called, and the out_put_hidden_dir
label is the appropriate location to call cancel_delayed_work_sync().

[1] https://syzkaller.appspot.com/bug?id=a66f45e96fdbeb76b796bf46eb25ea878c42a6c9

Link: http://lkml.kernel.org/r/964a8b27-cd69-357c-fe78-76b066056201@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+4f2e5f086147d543ab03@syzkaller.appspotmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: limit wiphy names to 128 bytes

commit a7cfebcb7594a24609268f91299ab85ba064bf82 upstream.

There's currently no limit on wiphy names, other than netlink
message size and memory limitations, but that causes issues when,
for example, the wiphy name is used in a uevent, e.g. in rfkill
where we use the same name for the rfkill instance, and then the
buffer there is "only" 2k for the environment variables.

This was reported by syzkaller, which used a 4k name.

Limit the name to something reasonable, I randomly picked 128.

Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: fix LOOP_GET_STATUS lock imbalance

commit bdac616db9bbadb90b7d6a406144571015e138f7 upstream.

Commit 2d1d4c1e591f made loop_get_status() drop lo_ctx_mutex before
returning, but the loop_get_status_old(), loop_get_status64(), and
loop_get_status_compat() wrappers don't call loop_get_status() if the
passed argument is NULL. The callers expect that the lock is dropped, so
make sure we drop it in that case, too.

Reported-by: syzbot+31e8daa8b3fc129e75f2@syzkaller.appspotmail.com
Fixes: 2d1d4c1e591f ("loop: don't call into filesystem while holding lo_ctl_mutex")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: don't call into filesystem while holding lo_ctl_mutex

commit 2d1d4c1e591fd40bd7dafd868a249d7d00e215d5 upstream.

We hit an issue where a loop device on NFS was stuck in
loop_get_status() doing vfs_getattr() after the NFS server died, which
caused a pile-up of uninterruptible processes waiting on lo_ctl_mutex.
There's no reason to hold this lock while we wait on the filesystem;
let's drop it so that other processes can do their thing. We need to
grab a reference on lo_backing_file while we use it, and we can get rid
of the check on lo_device, which has been unnecessary since commit
a34c0ae9ebd6 ("[PATCH] loop: remove the bio remapping capability") in
the linux-history tree.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix infinite iteration on ERP ready list

commit fa89adba1941e4f3b213399b81732a5c12fd9131 upstream.

zfcp_erp_adapter_reopen() schedules blocking of all of the adapter's
rports via zfcp_scsi_schedule_rports_block() and enqueues a reopen
adapter ERP action via zfcp_erp_action_enqueue(). Both are separately
processed asynchronously and concurrently.

Blocking of rports is done in a kworker by zfcp_scsi_rport_work(). It
calls zfcp_scsi_rport_block(), which then traces a DBF REC "scpdely" via
zfcp_dbf_rec_trig().  zfcp_dbf_rec_trig() acquires the DBF REC spin lock
and then iterates with list_for_each() over the adapter's ERP ready list
without holding the ERP lock. This opens a race window in which the
current list entry can be moved to another list, causing list_for_each()
to iterate forever on the wrong list, as the erp_ready_head is never
encountered as terminal condition.

Meanwhile the ERP action can be processed in the ERP thread by
zfcp_erp_thread(). It calls zfcp_erp_strategy(), which acquires the ERP
lock and then calls zfcp_erp_action_to_running() to move the ERP action
from the ready to the running list.  zfcp_erp_action_to_running() can
move the ERP action using list_move() just during the aforementioned
race window. It then traces a REC RUN "erator1" via zfcp_dbf_rec_run().
zfcp_dbf_rec_run() tries to acquire the DBF REC spin lock. If this is
held by the infinitely looping kworker, it effectively spins forever.

Example Sequence Diagram:

Process                ERP Thread             rport_work
-------------------    -------------------    -------------------
zfcp_erp_adapter_reopen()
zfcp_erp_adapter_block()
zfcp_scsi_schedule_rports_block()
lock ERP                                      zfcp_scsi_rport_work()
zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_ADAPTER)
list_add_tail() on ready                      !(rport_task==RPORT_ADD)
wake_up() ERP thread                          zfcp_scsi_rport_block()
zfcp_dbf_rec_trig()    zfcp_erp_strategy()    zfcp_dbf_rec_trig()
unlock ERP                                    lock DBF REC
zfcp_erp_wait()        lock ERP
|                      zfcp_erp_action_to_running()
|                                             list_for_each() ready
|                      list_move()              current entry
|                        ready to running
|                      zfcp_dbf_rec_run()       endless loop over running
|                      zfcp_dbf_rec_run_lvl()
|                      lock DBF REC spins forever

Any adapter recovery can trigger this, such as setting the device offline
or reboot.

V4.9 commit 4eeaa4f3f1d6 ("zfcp: close window with unblocked rport
during rport gone") introduced additional tracing of (un)blocking of
rports. It missed that the adapter->erp_lock must be held when calling
zfcp_dbf_rec_trig().

This fix uses the approach formerly introduced by commit aa0fec62391c
("[SCSI] zfcp: Fix sparse warning by providing new entry in dbf") that got
later removed by commit ae0904f60fab ("[SCSI] zfcp: Redesign of the debug
tracing for recovery actions.").

Introduce zfcp_dbf_rec_trig_lock(), a wrapper for zfcp_dbf_rec_trig() that
acquires and releases the adapter->erp_lock for read.

Reported-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Fixes: 4eeaa4f3f1d6 ("zfcp: close window with unblocked rport during rport gone")
Cc: <stable@vger.kernel.org> # 2.6.32+
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()

commit a45b599ad808c3c982fdcdc12b0b8611c2f92824 upstream.

This shall help avoid copying uninitialized memory to the userspace when
calling ioctl(fd, SG_IO) with an empty command.

Reported-by: syzbot+7d26fc1eea198488deab@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: defer ata device eh commands to libata

commit 318aaf34f1179b39fa9c30fa0f3288b645beee39 upstream.

When ata device doing EH, some commands still attached with tasks are
not passed to libata when abort failed or recover failed, so libata did
not handle these commands. After these commands done, sas task is freed,
but ata qc is not freed. This will cause ata qc leak and trigger a
warning like below:

WARNING: CPU: 0 PID: 28512 at drivers/ata/libata-eh.c:4037
ata_eh_finish+0xb4/0xcc
CPU: 0 PID: 28512 Comm: kworker/u32:2 Tainted: G     W  OE 4.14.0#1
......
Call trace:
[<ffff0000088b7bd0>] ata_eh_finish+0xb4/0xcc
[<ffff0000088b8420>] ata_do_eh+0xc4/0xd8
[<ffff0000088b8478>] ata_std_error_handler+0x44/0x8c
[<ffff0000088b8068>] ata_scsi_port_error_handler+0x480/0x694
[<ffff000008875fc4>] async_sas_ata_eh+0x4c/0x80
[<ffff0000080f6be8>] async_run_entry_fn+0x4c/0x170
[<ffff0000080ebd70>] process_one_work+0x144/0x390
[<ffff0000080ec100>] worker_thread+0x144/0x418
[<ffff0000080f2c98>] kthread+0x10c/0x138
[<ffff0000080855dc>] ret_from_fork+0x10/0x18

If ata qc leaked too many, ata tag allocation will fail and io blocked
for ever.

As suggested by Dan Williams, defer ata device commands to libata and
merge sas_eh_finish_cmd() with sas_eh_defer_cmd(). libata will handle
ata qcs correctly after this.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: Xiaofei Tan <tanxiaofei@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: use expoline thunks in the BPF JIT

[ Upstream commit de5cb6eb514ebe241e3edeb290cb41deb380b81d ]

The BPF JIT need safe guarding against spectre v2 in the sk_load_xxx
assembler stubs and the indirect branches generated by the JIT itself
need to be converted to expolines.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: extend expoline to BC instructions

[ Upstream commit 6deaa3bbca804b2a3627fd685f75de64da7be535 ]

The BPF JIT uses a 'b <disp>(%r<x>)' instruction in the definition
of the sk_load_word and sk_load_half functions.

Add support for branch-on-condition instructions contained in the
thunk code of an expoline.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: move spectre sysfs attribute code

[ Upstream commit 4253b0e0627ee3461e64c2495c616f1c8f6b127b ]

The nospec-branch.c file is compiled without the gcc options to
generate expoline thunks. The return branch of the sysfs show
functions cpu_show_spectre_v1 and cpu_show_spectre_v2 is an indirect
branch as well. These need to be compiled with expolines.

Move the sysfs functions for spectre reporting to a separate file
and loose an '.' for one of the messages.

Cc: stable@vger.kernel.org # 4.16
Fixes: d424986f1d ("s390: add sysfs attributes for spectre")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kernel: use expoline for indirect branches

[ Upstream commit c50c84c3ac4d5db683904bdb3257798b6ef980ae ]

The assember code in arch/s390/kernel uses a few more indirect branches
which need to be done with execute trampolines for CONFIG_EXPOLINE=y.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/ftrace: use expoline for indirect branches

[ Upstream commit 23a4d7fd34856da8218c4cfc23dba7a6ec0a423a ]

The return from the ftrace_stub, _mcount, ftrace_caller and
return_to_handler functions is done with "br %r14" and "br %r1".
These are indirect branches as well and need to use execute
trampolines for CONFIG_EXPOLINE=y.

The ftrace_caller function is a special case as it returns to the
start of a function and may only use %r0 and %r1. For a pre z10
machine the standard execute trampoline uses a LARL + EX to do
this, but this requires *two* registers in the range %r1..%r15.
To get around this the 'br %r1' located in the lowcore is used,
then the EX instruction does not need an address register.
But the lowcore trick may only be used for pre z14 machines,
with noexec=on the mapping for the first page may not contain
instructions. The solution for that is an ALTERNATIVE in the
expoline THUNK generated by 'GEN_BR_THUNK %r1' to switch to
EXRL, this relies on the fact that a machine that supports
noexec=on has EXRL as well.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/lib: use expoline for indirect branches

[ Upstream commit 97489e0663fa700d6e7febddc43b58df98d7bcda ]

The return from the memmove, memset, memcpy, __memset16, __memset32 and
__memset64 functions are done with "br %r14". These are indirect branches
as well and need to use execute trampolines for CONFIG_EXPOLINE=y.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/crc32-vx: use expoline for indirect branches

[ Upstream commit 467a3bf219cee12259182c5cb4821f88fd518a51 ]

The return from the crc32_le_vgfm_16/crc32c_le_vgfm_16 and the
crc32_be_vgfm_16 functions are done with "br %r14". These are indirect
branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: move expoline assembler macros to a header

[ Upstream commit 6dd85fbb87d1d6b87a3b1f02ca28d7b2abd2e7ba ]

To be able to use the expoline branches in different assembler
files move the associated macros from entry.S to a new header
nospec-insn.h.

While we are at it make the macros a bit nicer to use.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: add assembler macros for CPU alternatives

[ Upstream commit fba9eb7946251d6e420df3bdf7bc45195be7be9a ]

Add a header with macros usable in assembler files to emit alternative
code sequences. It works analog to the alternatives for inline assmeblies
in C files, with the same restrictions and capabilities.
The syntax is

     ALTERNATIVE "<default instructions sequence>", \
 "<alternative instructions sequence>", \
 "<features-bit>"
and

     ALTERNATIVE_2 "<default instructions sequence>", \
   "<alternative instructions sqeuence #1>", \
   "<feature-bit #1>",
   "<alternative instructions sqeuence #2>", \
   "<feature-bit #2>"

Reviewed-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext2: fix a block leak

commit 5aa1437d2d9a068c0334bd7c9dafa8ec4f97f13b upstream.

open file, unlink it, then use ioctl(2) to make it immutable or
append only.  Now close it and watch the blocks *not* freed...

Immutable/append-only checks belong in ->setattr().
Note: the bug is old and backport to anything prior to 737f2e93b972
("ext2: convert to use the new truncate convention") will need
these checks lifted into ext2_setattr().

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: vio: use put_device() instead of kfree()

[ Upstream commit 00ad691ab140b54ab9f5de5e74cb994f552e8124 ]

Never directly free @dev after calling device_register(), even
if it returned an error. Always use put_device() to give up the
reference initialized.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Fix net device attach on older Windows hosts

[ Commit 55be9f25be1ca5bda75c39808fc77e42691bc07f upstream. ]

On older windows hosts the net_device instance is returned to
the caller of rndis_filter_device_add() without having the presence
bit set first. This would cause any subsequent calls to network device
operations (e.g. MTU change, channel change) to fail after the device
is detached once, returning -ENODEV.

Instead of returning the device instabce, we take the exit path where
we call netif_device_attach()

Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Ensure correct teardown message sequence order

[ Commit a56d99d714665591fed8527b90eef21530ea61e0 upstream. ]

Prior to commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split")
the call sequence in netvsc_device_remove() was as follows (as
implemented in netvsc_destroy_buf()):
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Teardown receive buffer GPADL
3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
4- Teardown send buffer GPADL
5- Close vmbus

This didn't work for WS2016 hosts. Commit 0cf737808ae7
("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the
teardown sequence as follows:
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Close vmbus
4- Teardown receive buffer GPADL
5- Teardown send buffer GPADL

That worked well for WS2016 hosts, but it prevented guests on older hosts from
shutting down after changing network settings. Commit 0ef58b0a05c1
("hv_netvsc: change GPAD teardown order on older versions") ensured the
following message sequence for older hosts
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Teardown receive buffer GPADL
4- Teardown send buffer GPADL
5- Close vmbus

However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the
process becomes uninterruptible. On futher analysis it turns out that on tearing
down the receive buffer GPADL the kernel is waiting indefinitely
in vmbus_teardown_gpadl() for a completion to be signaled.

Here is a snippet of where this occurs:
int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
{
        struct vmbus_channel_gpadl_teardown *msg;
        struct vmbus_channel_msginfo *info;
        unsigned long flags;
        int ret;

        info = kmalloc(sizeof(*info) +
                       sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL);
        if (!info)
                return -ENOMEM;

        init_completion(&info->waitevent);
        info->waiting_channel = channel;
[....]
        ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown),
                             true);

        if (ret)
                goto post_msg_err;

        wait_for_completion(&info->waitevent);
[....]
}

The completion is signaled from vmbus_ongpadl_torndown(), which gets called when
the corresponding message is received from the host, which apparently never happens
in that case.
This patch works around the issue by restoring the first mentioned message sequence
for older hosts

Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Split netvsc_revoke_buf() and netvsc_teardown_gpadl()

[ Commit 7992894c305eaf504d005529637ff8283d0a849d upstream. ]

Split each of the functions into two for each of send/recv buffers.
This will be needed in order to implement a fine-grained messaging
sequence to the host so that we accommodate the requirements of
different Windows versions

Fixes: 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Use Windows version instead of NVSP version on GPAD teardown

commit 2afc5d61a7197de25a61f54ea4ecfb4cb62b1d42A upstram

When changing network interface settings, Windows guests
older than WS2016 can no longer shutdown. This was addressed
by commit 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order
on older versions"), however the issue also occurs on WS2012
guests that share NVSP protocol versions with WS2016 guests.
Hence we use Windows version directly to differentiate them.

Fixes: 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>