review.tizen.org Git - platform/kernel/linux-rpi.git/log

ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook

[ Upstream commit 1d8025ec722d5e011f9299c46274eb21fb54a428 ]

There is a HP ProBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221128022849.13759-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi: fix userspace infinite retry read efivars after EFI runtime services page fault

[ Upstream commit e006ac3003080177cf0b673441a4241f77aaecce ]

After [1][2], if we catch exceptions due to EFI runtime service, we will
clear EFI_RUNTIME_SERVICES bit to disable EFI runtime service, then the
subsequent routine which invoke the EFI runtime service should fail.

But the userspace cat efivars through /sys/firmware/efi/efivars/ will stuck
and infinite loop calling read() due to efivarfs_file_read() return -EINTR.

The -EINTR is converted from EFI_ABORTED by efi_status_to_err(), and is
an improper return value in this situation, so let virt_efi_xxx() return
EFI_DEVICE_ERROR and converted to -EIO to invoker.

Cc: <stable@vger.kernel.org>
Fixes: 3425d934fc03 ("efi/x86: Handle page faults occurring while running EFI runtime services")
Fixes: 23715a26c8d8 ("arm64: efi: Recover from synchronous exceptions occurring in firmware")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix general protection fault in nilfs_btree_insert()

commit 7633355e5c7f29c049a9048e461427d1d8ed3051 upstream.

If nilfs2 reads a corrupted disk image and tries to reads a b-tree node
block by calling __nilfs_btree_get_block() against an invalid virtual
block address, it returns -ENOENT because conversion of the virtual block
address to a disk block address fails.  However, this return value is the
same as the internal code that b-tree lookup routines return to indicate
that the block being searched does not exist, so functions that operate on
that b-tree may misbehave.

When nilfs_btree_insert() receives this spurious 'not found' code from
nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was
successful and continues the insert operation using incomplete lookup path
data, causing the following crash:

general protection fault, probably for non-canonical address
0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
...
RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline]
RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline]
RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238
Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89
ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c
28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02
...
Call Trace:
<TASK>
  nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline]
  nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147
  nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101
  __block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991
  __block_write_begin fs/buffer.c:2041 [inline]
  block_write_begin+0x93/0x1e0 fs/buffer.c:2102
  nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261
  generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
  __generic_file_write_iter+0x176/0x400 mm/filemap.c:3900
  generic_file_write_iter+0xab/0x310 mm/filemap.c:3932
  call_write_iter include/linux/fs.h:2186 [inline]
  new_sync_write fs/read_write.c:491 [inline]
  vfs_write+0x7dc/0xc50 fs/read_write.c:584
  ksys_write+0x177/0x2a0 fs/read_write.c:637
  do_syscall_x64 arch/x86/entry/common.c:50 [inline]
  do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
</TASK>

This patch fixes the root cause of this problem by replacing the error
code that __nilfs_btree_get_block() returns on block address conversion
failure from -ENOENT to another internal code -EINVAL which means that the
b-tree metadata is corrupted.

By returning -EINVAL, it propagates without glitches, and for all relevant
b-tree operations, functions in the upper bmap layer output an error
message indicating corrupted b-tree metadata via
nilfs_bmap_convert_error(), and code -EIO will be eventually returned as
it should be.

Link: https://lkml.kernel.org/r/000000000000bd89e205f0e38355@google.com
Link: https://lkml.kernel.org/r/20230105055356.8811-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ede796cecd5296353515@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zonefs: Detect append writes at invalid locations

commit a608da3bd730d718f2d3ebec1c26f9865f8f17ce upstream.

Using REQ_OP_ZONE_APPEND operations for synchronous writes to sequential
files succeeds regardless of the zone write pointer position, as long as
the target zone is not full. This means that if an external (buggy)
application writes to the zone of a sequential file underneath the file
system, subsequent file write() operation will succeed but the file size
will not be correct and the file will contain invalid data written by
another application.

Modify zonefs_file_dio_append() to check the written sector of an append
write (returned in bio->bi_iter.bi_sector) and return -EIO if there is a
mismatch with the file zone wp offset field. This change triggers a call
to zonefs_io_error() and a zone check. Modify zonefs_io_error_cb() to
not expose the unexpected data after the current inode size when the
errors=remount-ro mode is used. Other error modes are correctly handled
already.

Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add exception protection processing for vd in axi_chan_handle_err function

commit 57054fe516d59d03a7bcf1888e82479ccc244f87 upstream.

Since there is no protection for vd, a kernel panic will be
triggered here in exceptional cases.

You can refer to the processing of axi_chan_block_xfer_complete function

The triggered kernel panic is as follows:

[   67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
[   67.848447] Mem abort info:
[   67.848449]   ESR = 0x96000004
[   67.848451]   EC = 0x25: DABT (current EL), IL = 32 bits
[   67.848454]   SET = 0, FnV = 0
[   67.848456]   EA = 0, S1PTW = 0
[   67.848458] Data abort info:
[   67.848460]   ISV = 0, ISS = 0x00000004
[   67.848462]   CM = 0, WnR = 0
[   67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000
[   67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000
[   67.848472] Internal error: Oops: 96000004 [#1] SMP
[   67.848475] Modules linked in: dmatest
[   67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11
[   67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--)
[   67.848487] pc : axi_chan_handle_err+0xc4/0x230
[   67.848491] lr : axi_chan_handle_err+0x30/0x230
[   67.848493] sp : ffff0803fe55ae50
[   67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200
[   67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080
[   67.848504] x25: ffff800010d33880 x24: ffff80001139d850
[   67.848508] x23: ffff0800c097c168 x22: 0000000000000000
[   67.848512] x21: 0000000000000080 x20: 0000000000002000
[   67.848517] x19: ffff0800c097c080 x18: 0000000000000000
[   67.848521] x17: 0000000000000000 x16: 0000000000000000
[   67.848525] x15: 0000000000000000 x14: 0000000000000000
[   67.848529] x13: 0000000000000000 x12: 0000000000000040
[   67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a
[   67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270
[   67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0
[   67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480
[   67.848550] x3 : dead000000000100 x2 : dead000000000122
[   67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168
[   67.848559] Call trace:
[   67.848562]  axi_chan_handle_err+0xc4/0x230
[   67.848566]  dw_axi_dma_interrupt+0xf4/0x590
[   67.848569]  __handle_irq_event_percpu+0x60/0x220
[   67.848573]  handle_irq_event+0x64/0x120
[   67.848576]  handle_fasteoi_irq+0xc4/0x220
[   67.848580]  __handle_domain_irq+0x80/0xe0
[   67.848583]  gic_handle_irq+0xc0/0x138
[   67.848585]  el1_irq+0xc8/0x180
[   67.848588]  arch_cpu_idle+0x14/0x2c
[   67.848591]  default_idle_call+0x40/0x16c
[   67.848594]  do_idle+0x1f0/0x250
[   67.848597]  cpu_startup_entry+0x2c/0x60
[   67.848600]  rest_init+0xc0/0xcc
[   67.848603]  arch_call_rest_init+0x14/0x1c
[   67.848606]  start_kernel+0x4cc/0x500
[   67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1)
[   67.848613] ---[ end trace 585a97036f88203a ]---

Signed-off-by: Shawn.Shao <shawn.shao@jaguarmicro.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230112055802.1764-1-shawn.shao@jaguarmicro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211: sdata can be NULL during AMPDU start

commit 69403bad97aa0162e3d7911b27e25abe774093df upstream.

ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a
deauthentication is ongoing.

Here a trace triggering the race with the hostapd test
multi_ap_fronthaul_on_ap:

(gdb) list *drv_ampdu_action+0x46
0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396).
391             int ret = -EOPNOTSUPP;
392
393             might_sleep();
394
395             sdata = get_bss_sdata(sdata);
396             if (!check_sdata_in_driver(sdata))
397                     return -EIO;
398
399             trace_drv_ampdu_action(local, sdata, params);
400

wlan0: moving STA 02:00:00:00:03:00 to state 3
wlan0: associated
wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0
wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port)
wlan0: moving STA 02:00:00:00:03:00 to state 2
wlan0: moving STA 02:00:00:00:03:00 to state 1
wlan0: Removed STA 02:00:00:00:03:00
wlan0: Destroyed STA 02:00:00:00:03:00
BUG: unable to handle page fault for address: fffffffffffffb48
PGD 11814067 P4D 11814067 PUD 11816067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G        W          6.1.0-rc8-wt+ #59
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Workqueue: phy3 ieee80211_ba_session_work [mac80211]
RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211]
Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85
RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287
RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240
RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40
RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0
R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8
FS:  0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0
Call Trace:
<TASK>
ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211]
ieee80211_ba_session_work+0xff/0x2e0 [mac80211]
process_one_work+0x29f/0x620
worker_thread+0x4d/0x3d0
? process_one_work+0x620/0x620
kthread+0xfb/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20221230121850.218810-2-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: brcmfmac: fix regression for Broadcom PCIe wifi devices

commit ed05cb177ae5cd7f02f1d6e7706ba627d30f1696 upstream.

A sanity check was introduced considering maximum flowrings above
256 as insane and effectively aborting the device probe. This
resulted in regression for number of users as the value turns out
to be sane after all.

Fixes: 2aca4f3734bd ("brcmfmac: return error when getting invalid max_flowrings from dongle")
Reported-by: chainofflowers <chainofflowers@posteo.net>
Link: https://lore.kernel.org/all/4781984.GXAFRqVoOG@luna/
Reported-by: Christian Marillat <marillat@debian.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216894
Cc: stable@vger.kernel.org
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230111112419.24185-1-arend.vanspriel@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_qca: Fix driver shutdown on closed serdev

commit 272970be3dabd24cbe50e393ffee8f04aec3b9a8 upstream.

The driver shutdown callback (which sends EDL_SOC_RESET to the device
over serdev) should not be invoked when HCI device is not open (e.g. if
hci_dev_open_sync() failed), because the serdev and its TTY are not open
either.  Also skip this step if device is powered off
(qca_power_shutdown()).

The shutdown callback causes use-after-free during system reboot with
Qualcomm Atheros Bluetooth:

  Unable to handle kernel paging request at virtual address
  0072662f67726fd7
  ...
  CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G        W
  6.1.0-rt5-00325-g8a5f56bcfcca #8
  Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
  Call trace:
   tty_driver_flush_buffer+0x4/0x30
   serdev_device_write_flush+0x24/0x34
   qca_serdev_shutdown+0x80/0x130 [hci_uart]
   device_shutdown+0x15c/0x260
   kernel_restart+0x48/0xac

KASAN report:

  BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50
  Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1

  CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted
  6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28
  Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
  Call trace:
   dump_backtrace.part.0+0xdc/0xf0
   show_stack+0x18/0x30
   dump_stack_lvl+0x68/0x84
   print_report+0x188/0x488
   kasan_report+0xa4/0xf0
   __asan_load8+0x80/0xac
   tty_driver_flush_buffer+0x1c/0x50
   ttyport_write_flush+0x34/0x44
   serdev_device_write_flush+0x48/0x60
   qca_serdev_shutdown+0x124/0x274
   device_shutdown+0x1e8/0x350
   kernel_restart+0x48/0xb0
   __do_sys_reboot+0x244/0x2d0
   __arm64_sys_reboot+0x54/0x70
   invoke_syscall+0x60/0x190
   el0_svc_common.constprop.0+0x7c/0x160
   do_el0_svc+0x44/0xf0
   el0_svc+0x2c/0x6c
   el0t_64_sync_handler+0xbc/0x140
   el0t_64_sync+0x190/0x194

Fixes: 7e7bbddd029b ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: omapfb: avoid stack overflow warning

[ Upstream commit 634cf6ead93988b0da9ac054521ab63a3ba189db ]

The dsi_irq_stats structure is a little too big to fit on the
stack of a 32-bit task, depending on the specific gcc options:

fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs':
fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Since this is only a debugfs file, performance is not critical,
so just dynamically allocate it, and print an error message
in there in place of a failure code when the allocation fails.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/rapl: Treat Tigerlake like Icelake

[ Upstream commit c07311b5509f6035f1dd828db3e90ff4859cf3b9 ]

Since Tigerlake seems to have inherited its cstates and other RAPL power
caps from Icelake, assume it also follows Icelake for its RAPL events.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20221228113454.1199118-1-rodrigo.vivi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: let's avoid panic if extent_tree is not created

[ Upstream commit df9d44b645b83fffccfb4e28c1f93376585fdec8 ]

This patch avoids the below panic.

pc : __lookup_extent_tree+0xd8/0x760
lr : f2fs_do_write_data_page+0x104/0x87c
sp : ffffffc010cbb3c0
x29: ffffffc010cbb3e0 x28: 0000000000000000
x27: ffffff8803e7f020 x26: ffffff8803e7ed40
x25: ffffff8803e7f020 x24: ffffffc010cbb460
x23: ffffffc010cbb480 x22: 0000000000000000
x21: 0000000000000000 x20: ffffffff22e90900
x19: 0000000000000000 x18: ffffffc010c5d080
x17: 0000000000000000 x16: 0000000000000020
x15: ffffffdb1acdbb88 x14: ffffff888759e2b0
x13: 0000000000000000 x12: ffffff802da49000
x11: 000000000a001200 x10: ffffff8803e7ed40
x9 : ffffff8023195800 x8 : ffffff802da49078
x7 : 0000000000000001 x6 : 0000000000000000
x5 : 0000000000000006 x4 : ffffffc010cbba28
x3 : 0000000000000000 x2 : ffffffc010cbb480
x1 : 0000000000000000 x0 : ffffff8803e7ed40
Call trace:
__lookup_extent_tree+0xd8/0x760
f2fs_do_write_data_page+0x104/0x87c
f2fs_write_single_data_page+0x420/0xb60
f2fs_write_cache_pages+0x418/0xb1c
__f2fs_write_data_pages+0x428/0x58c
f2fs_write_data_pages+0x30/0x40
do_writepages+0x88/0x190
__writeback_single_inode+0x48/0x448
writeback_sb_inodes+0x468/0x9e8
__writeback_inodes_wb+0xb8/0x2a4
wb_writeback+0x33c/0x740
wb_do_writeback+0x2b4/0x400
wb_workfn+0xe4/0x34c
process_one_work+0x24c/0x5bc
worker_thread+0x3e8/0xa50
kthread+0x150/0x1b4

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/asm: Fix an assembler warning with current binutils

[ Upstream commit 55d235361fccef573990dfa5724ab453866e7816 ]

Fix a warning: "found `movsd'; assuming `movsl' was meant"

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: always report error in run_one_delayed_ref()

[ Upstream commit 39f501d68ec1ed5cd5c66ac6ec2a7131c517bb92 ]

Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but
if end users hit such problem, there will be no chance that
btrfs_debug() is enabled.  This can lead to very little useful info for
debugging.

This patch will:

- Add extra info for error reporting
  Including:
  * logical bytenr
  * num_bytes
  * type
  * action
  * ref_mod

- Replace the btrfs_debug() with btrfs_err()

- Move the error reporting into run_one_delayed_ref()
  This is to avoid use-after-free, the @node can be freed in the caller.

This error should only be triggered at most once.

As if run_one_delayed_ref() failed, we trigger the error message, then
causing the call chain to error out:

btrfs_run_delayed_refs()
`- btrfs_run_delayed_refs()
   `- btrfs_run_delayed_refs_for_head()
      `- run_one_delayed_ref()

And we will abort the current transaction in btrfs_run_delayed_refs().
If we have to run delayed refs for the abort transaction,
run_one_delayed_ref() will just cleanup the refs and do nothing, thus no
new error messages would be output.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/srp: Move large values to a new enum for gcc13

[ Upstream commit 56c5dab20a6391604df9521f812c01d1e3fe1bd0 ]

Since gcc13, each member of an enum has the same type as the enum [1]. And
that is inherited from its members. Provided these two:
  SRP_TAG_NO_REQ        = ~0U,
  SRP_TAG_TSK_MGMT = 1U << 31
all other members are unsigned ints.

Esp. with SRP_MAX_SGE and SRP_TSK_MGMT_SQ_SIZE and their use in min(),
this results in the following warnings:
  include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
  drivers/infiniband/ulp/srp/ib_srp.c:563:42: note: in expansion of macro 'min'

  include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
  drivers/infiniband/ulp/srp/ib_srp.c:2369:27: note: in expansion of macro 'min'

So move the large values away to a separate enum, so that they don't
affect other members.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113

Link: https://lore.kernel.org/r/20221212120411.13750-1-jirislaby@kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down()

[ Upstream commit ad425666a1f05d9b215a84cf010c3789b2ea8206 ]

There is no functional change. Moving these two functions for following
patch "r8169: fix dmar pte write access is not set error".

Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy stats

[ Upstream commit 9deb1e9fb88b1120a908676fa33bdf9e2eeaefce ]

It's not very useful to copy back an empty ethtool_stats struct and
return 0 if we didn't actually have any stats. This also allows for
further simplification of this function in the future commits.

Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vduse: Validate vq_num in vduse_validate_config()

[ Upstream commit 937c783aa3d8d77963ec91918d3298edb45b9161 ]

Add a limit to 'config->vq_num' which is user controlled data which
comes from an vduse_ioctl to prevent large memory allocations.

Micheal says - This limit is somewhat arbitrary.
However, currently virtio pci and ccw are limited to a 16 bit vq number.
While MMIO isn't it is also isn't used with lots of VQs due to
current lack of support for per-vq interrupts.
Thus, the 0xffff limit on number of VQs corresponding
to a 16-bit VQ number seems sufficient for now.

This is found using static analysis with smatch.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Message-Id: <20221128155717.2579992-1-harshit.m.mogalapalli@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_pci: modify ENOENT to EINVAL

[ Upstream commit b66ead2d0ecac00c3a06a6218af5411cb5fcb5d5 ]

Virtio_crypto use max_data_queues+1 to setup vqs,
we use vp_modern_get_num_queues to protect the vq range in setup_vq.
We could enter index >= vp_modern_get_num_queues(mdev) in setup_vq
if common->num_queues is not set well,and it return -ENOENT.
It is better to use -EINVAL instead.

Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Message-Id: <20221101111655.1947-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/virtio: initialize spinlocks in vring_test.c

[ Upstream commit c262f75cb6bb5a63828e72ce3b8fe808e5029479 ]

The virtio_device vqs_list spinlocks must be initialized before use to
prevent functions that manipulate the device virtualqueues, such as
vring_new_virtqueue(), from blocking indefinitely.

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Message-Id: <20221012062949.1526176-1-ricardo.canuelo@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: check null propagation only neither reg is PTR_TO_BTF_ID

[ Upstream commit cedebd74cf3883f0384af9ec26b4e6f8f1964dd4 ]

Verify that nullness information is not porpagated in the branches
of register to register JEQ and JNE operations if one of them is
PTR_TO_BTF_ID. Implement this in C level so we can use CO-RE.

Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221222024414.29539-2-sunhao.th@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS/filelayout: Fix coalescing test for single DS

[ Upstream commit a6b9d2fa0024e7e399c26facd0fb466b7396e2b9 ]

When there is a single DS no striping constraints need to be placed on
the IO. When such constraint is applied then buffered reads don't
coalesce to the DS's rsize.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix trace event name typo for FLUSH_DELAYED_REFS

[ Upstream commit 0a3212de8ab3e2ce5808c6265855e528d4a6767b ]

Fix a typo of printing FLUSH_DELAYED_REFS event in flush_space() as
FLUSH_ELAYED_REFS.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.89

Link: https://lore.kernel.org/r/20230116154747.036911298@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: amd: Add dynamic debugging for active GPIOs

commit 1d66e379731f79ae5039a869c0fde22a4f6a6a91 upstream.

Some laptops have been reported to wake up from s2idle when plugging
in the AC adapter or by closing the lid.  This is a surprising
behavior that is further clarified by commit cb3e7d624c3ff ("PM:
wakeup: Add extra debugging statement for multiple active IRQs").

With that commit in place the following interaction can be seen
when the lid is closed:

[   28.946038] PM: suspend-to-idle
[   28.946083] ACPI: EC: ACPI EC GPE status set
[   28.946101] ACPI: PM: Rearming ACPI SCI for wakeup
[   28.950152] Timekeeping suspended for 3.320 seconds
[   28.950152] PM: Triggering wakeup from IRQ 9
[   28.950152] ACPI: EC: ACPI EC GPE status set
[   28.950152] ACPI: EC: ACPI EC GPE dispatched
[   28.995057] ACPI: EC: ACPI EC work flushed
[   28.995075] ACPI: PM: Rearming ACPI SCI for wakeup
[   28.995131] PM: Triggering wakeup from IRQ 9
[   28.995271] ACPI: EC: ACPI EC GPE status set
[   28.995291] ACPI: EC: ACPI EC GPE dispatched
[   29.098556] ACPI: EC: ACPI EC work flushed
[   29.207020] ACPI: EC: ACPI EC work flushed
[   29.207037] ACPI: PM: Rearming ACPI SCI for wakeup
[   29.211095] Timekeeping suspended for 0.739 seconds
[   29.211095] PM: Triggering wakeup from IRQ 9
[   29.211079] PM: Triggering wakeup from IRQ 7
[   29.211095] ACPI: PM: ACPI non-EC GPE wakeup
[   29.211095] PM: resume from suspend-to-idle

* IRQ9 on this laptop is used for the ACPI SCI.
* IRQ7 on this laptop is used for the GPIO controller.

What has occurred is when the lid was closed the EC woke up the
SoC from it's deepest sleep state and the kernel's s2idle loop
processed all EC events.  When it was finished processing EC events,
it checked for any other reasons to wake (break the s2idle loop).

The IRQ for the GPIO controller was active so the loop broke, and
then this IRQ was processed.  This is not a kernel bug but it is
certainly a surprising behavior, and to better debug it we should
have a dynamic debugging message that we can enact to catch it.

Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221013134729.5592-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"

commit b659b613cea2ae39746ca8bd2b69d1985dd9d770 upstream.

This reverts commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac.

This patch results in some qemu test failures, specifically xilinx-zynq-a9
machine and zynq-zc702 as well as zynq-zed devicetree files, when trying
to boot from USB drive.

Link: https://lore.kernel.org/lkml/20221220194334.GA942039@roeck-us.net/
Fixes: 8a7b31d545d3 ("usb: ulpi: defer ulpi_register on ulpi_read_id timeout")
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221222205302.45761-1-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: handle bio_split_to_limits() NULL return

commit 613b14884b8595e20b9fac4126bf627313827fbe upstream.

This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/io-wq: only free worker if it was allocated for creation

commit e6db6f9398dadcbc06318a133d4c44a2d3844e61 upstream.

We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.

Fixes: af82425c6a2d ("io_uring/io-wq: free worker if task_work creation is canceled")
Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/io-wq: free worker if task_work creation is canceled

commit af82425c6a2d2f347c79b63ce74fca6dc6be157f upstream.

If we cancel the task_work, the worker will never come into existance.
As this is the last reference to it, ensure that we get it freed
appropriately.

Cc: stable@vger.kernel.org
Reported-by: 진호 <wnwlsgh98@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Remove scsi_dma_map() error messages

commit 0c25422d34b4726b2707d5f38560943155a91b80 upstream.

When scsi_dma_map() fails by returning a sges_left value less than zero,
the amount of logging produced can be extremely high. In a recent end-user
environment, 1200 messages per second were being sent to the log buffer.
This eventually overwhelmed the system and it stalled.

These error messages are not needed. Remove them.

Link: https://lore.kernel.org/r/20220303140203.12642-1-sreekanth.reddy@broadcom.com
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: fix NULL-deref in init error path

[ Upstream commit 703c13fe3c9af557d312f5895ed6a5fda2711104 ]

In cases where runtime services are not supported or have been disabled,
the runtime services workqueue will never have been allocated.

Do not try to destroy the workqueue unconditionally in the unlikely
event that EFI initialisation fails to avoid dereferencing a NULL
pointer.

Fixes: 98086df8b70c ("efi: add missed destroy_workqueue when efisubsys_init fails")
Cc: stable@vger.kernel.org
Cc: Li Heng <liheng40@huawei.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: cmpxchg_double*: hazard against entire exchange variable

[ Upstream commit 031af50045ea97ed4386eb3751ca2c134d0fc911 ]

The inline assembly for arm64's cmpxchg_double*() implementations use a
+Q constraint to hazard against other accesses to the memory location
being exchanged. However, the pointer passed to the constraint is a
pointer to unsigned long, and thus the hazard only applies to the first
8 bytes of the location.

GCC can take advantage of this, assuming that other portions of the
location are unchanged, leading to a number of potential problems.

This is similar to what we fixed back in commit:

  fee960bed5e857eb ("arm64: xchg: hazard against entire exchange variable")

... but we forgot to adjust cmpxchg_double*() similarly at the same
time.

The same problem applies, as demonstrated with the following test:

| struct big {
|         u64 lo, hi;
| } __aligned(128);
|
| unsigned long foo(struct big *b)
| {
|         u64 hi_old, hi_new;
|
|         hi_old = b->hi;
|         cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78);
|         hi_new = b->hi;
|
|         return hi_old ^ hi_new;
| }

... which GCC 12.1.0 compiles as:

| 0000000000000000 <foo>:
|    0:   d503233f        paciasp
|    4:   aa0003e4        mov     x4, x0
|    8:   1400000e        b       40 <foo+0x40>
|    c:   d2800240        mov     x0, #0x12                       // #18
|   10:   d2800681        mov     x1, #0x34                       // #52
|   14:   aa0003e5        mov     x5, x0
|   18:   aa0103e6        mov     x6, x1
|   1c:   d2800ac2        mov     x2, #0x56                       // #86
|   20:   d2800f03        mov     x3, #0x78                       // #120
|   24:   48207c82        casp    x0, x1, x2, x3, [x4]
|   28:   ca050000        eor     x0, x0, x5
|   2c:   ca060021        eor     x1, x1, x6
|   30:   aa010000        orr     x0, x0, x1
|   34:   d2800000        mov     x0, #0x0                        // #0    <--- BANG
|   38:   d50323bf        autiasp
|   3c:   d65f03c0        ret
|   40:   d2800240        mov     x0, #0x12                       // #18
|   44:   d2800681        mov     x1, #0x34                       // #52
|   48:   d2800ac2        mov     x2, #0x56                       // #86
|   4c:   d2800f03        mov     x3, #0x78                       // #120
|   50:   f9800091        prfm    pstl1strm, [x4]
|   54:   c87f1885        ldxp    x5, x6, [x4]
|   58:   ca0000a5        eor     x5, x5, x0
|   5c:   ca0100c6        eor     x6, x6, x1
|   60:   aa0600a6        orr     x6, x5, x6
|   64:   b5000066        cbnz    x6, 70 <foo+0x70>
|   68:   c8250c82        stxp    w5, x2, x3, [x4]
|   6c:   35ffff45        cbnz    w5, 54 <foo+0x54>
|   70:   d2800000        mov     x0, #0x0                        // #0     <--- BANG
|   74:   d50323bf        autiasp
|   78:   d65f03c0        ret

Notice that at the lines with "BANG" comments, GCC has assumed that the
higher 8 bytes are unchanged by the cmpxchg_double() call, and that
`hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and
LL/SC versions of cmpxchg_double().

This patch fixes the issue by passing a pointer to __uint128_t into the
+Q constraint, ensuring that the compiler hazards against the entire 16
bytes being modified.

With this change, GCC 12.1.0 compiles the above test as:

| 0000000000000000 <foo>:
|    0:   f9400407        ldr     x7, [x0, #8]
|    4:   d503233f        paciasp
|    8:   aa0003e4        mov     x4, x0
|    c:   1400000f        b       48 <foo+0x48>
|   10:   d2800240        mov     x0, #0x12                       // #18
|   14:   d2800681        mov     x1, #0x34                       // #52
|   18:   aa0003e5        mov     x5, x0
|   1c:   aa0103e6        mov     x6, x1
|   20:   d2800ac2        mov     x2, #0x56                       // #86
|   24:   d2800f03        mov     x3, #0x78                       // #120
|   28:   48207c82        casp    x0, x1, x2, x3, [x4]
|   2c:   ca050000        eor     x0, x0, x5
|   30:   ca060021        eor     x1, x1, x6
|   34:   aa010000        orr     x0, x0, x1
|   38:   f9400480        ldr     x0, [x4, #8]
|   3c:   d50323bf        autiasp
|   40:   ca0000e0        eor     x0, x7, x0
|   44:   d65f03c0        ret
|   48:   d2800240        mov     x0, #0x12                       // #18
|   4c:   d2800681        mov     x1, #0x34                       // #52
|   50:   d2800ac2        mov     x2, #0x56                       // #86
|   54:   d2800f03        mov     x3, #0x78                       // #120
|   58:   f9800091        prfm    pstl1strm, [x4]
|   5c:   c87f1885        ldxp    x5, x6, [x4]
|   60:   ca0000a5        eor     x5, x5, x0
|   64:   ca0100c6        eor     x6, x6, x1
|   68:   aa0600a6        orr     x6, x5, x6
|   6c:   b5000066        cbnz    x6, 78 <foo+0x78>
|   70:   c8250c82        stxp    w5, x2, x3, [x4]
|   74:   35ffff45        cbnz    w5, 5c <foo+0x5c>
|   78:   f9400480        ldr     x0, [x4, #8]
|   7c:   d50323bf        autiasp
|   80:   ca0000e0        eor     x0, x7, x0
|   84:   d65f03c0        ret

... sampling the high 8 bytes before and after the cmpxchg, and
performing an EOR, as we'd expect.

For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note
that linux-4.9.y is oldest currently supported stable release, and
mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run
on my machines due to library incompatibilities.

I've also used a standalone test to check that we can use a __uint128_t
pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM
3.9.1.

Fixes: 5284e1b4bc8a ("arm64: xchg: Implement cmpxchg_double")
Fixes: e9a4b795652f ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU")
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/
Reported-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Y6GXoO4qmH9OIZ5Q@hirez.programming.kicks-ass.net/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230104151626.3262137-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: atomics: remove LL/SC trampolines

[ Upstream commit b2c3ccbd0011bb3b51d0fec24cb3a5812b1ec8ea ]

When CONFIG_ARM64_LSE_ATOMICS=y, each use of an LL/SC atomic results in
a fragment of code being generated in a subsection without a clear
association with its caller. A trampoline in the caller branches to the
LL/SC atomic with with a direct branch, and the atomic directly branches
back into its trampoline.

This breaks backtracing, as any PC within the out-of-line fragment will
be symbolized as an offset from the nearest prior symbol (which may not
be the function using the atomic), and since the atomic returns with a
direct branch, the caller's PC may be missing from the backtrace.

For example, with secondary_start_kernel() hacked to contain
atomic_inc(NULL), the resulting exception can be reported as being taken
from cpus_are_stuck_in_kernel():

| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
|   ESR = 0x0000000096000004
|   EC = 0x25: DABT (current EL), IL = 32 bits
|   SET = 0, FnV = 0
|   EA = 0, S1PTW = 0
|   FSC = 0x04: level 0 translation fault
| Data abort info:
|   ISV = 0, ISS = 0x00000004
|   CM = 0, WnR = 0
| [0000000000000000] user address but active_mm is swapper
| Internal error: Oops: 96000004 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19.0-11219-geb555cb5b794-dirty #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : cpus_are_stuck_in_kernel+0xa4/0x120
| lr : secondary_start_kernel+0x164/0x170
| sp : ffff80000a4cbe90
| x29: ffff80000a4cbe90 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
| x20: 0000000000000001 x19: 0000000000000001 x18: 0000000000000008
| x17: 3030383832343030 x16: 3030303030307830 x15: ffff80000a4cbab0
| x14: 0000000000000001 x13: 5d31666130663133 x12: 3478305b20313030
| x11: 3030303030303078 x10: 3020726f73736563 x9 : 726f737365636f72
| x8 : ffff800009ff2ef0 x7 : 0000000000000003 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000100
| x2 : 0000000000000000 x1 : ffff0000029bd880 x0 : 0000000000000000
| Call trace:
|  cpus_are_stuck_in_kernel+0xa4/0x120
|  __secondary_switched+0xb0/0xb4
| Code: 35ffffa3 17fffc6c d53cd040 f9800011 (885f7c01)
| ---[ end trace 0000000000000000 ]---

This is confusing and hinders debugging, and will be problematic for
CONFIG_LIVEPATCH as these cases cannot be unwound reliably.

This is very similar to recent issues with out-of-line exception fixups,
which were removed in commits:

  35d67794b8828333 ("arm64: lib: __arch_clear_user(): fold fixups into body")
  4012e0e22739eef9 ("arm64: lib: __arch_copy_from_user(): fold fixups into body")
  139f9ab73d60cf76 ("arm64: lib: __arch_copy_to_user(): fold fixups into body")

When the trampolines were introduced in commit:

  addfc38672c73efd ("arm64: atomics: avoid out-of-line ll/sc atomics")

The rationale was to improve icache performance by grouping the LL/SC
atomics together. This has never been measured, and this theoretical
benefit is outweighed by other factors:

* As the subsections are collapsed into sections at object file
  granularity, these are spread out throughout the kernel and can share
  cachelines with unrelated code regardless.

* GCC 12.1.0 has been observed to place the trampoline out-of-line in
  specialised __ll_sc_*() functions, introducing more branching than was
  intended.

* Removing the trampolines has been observed to shrink a defconfig
  kernel Image by 64KiB when building with GCC 12.1.0.

This patch removes the LL/SC trampolines, meaning that the LL/SC atomics
will be inlined into their callers (or placed in out-of line functions
using regular BL/RET pairs). When CONFIG_ARM64_LSE_ATOMICS=y, the LL/SC
atomics are always called in an unlikely branch, and will be placed in a
cold portion of the function, so this should have minimal impact to the
hot paths.

Other than the improved backtracing, there should be no functional
change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220817155914.3975112-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 031af50045ea ("arm64: cmpxchg_double*: hazard against entire exchange variable")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: atomics: format whitespace consistently

[ Upstream commit 8e6082e94aac6d0338883b5953631b662a5a9188 ]

The code for the atomic ops is formatted inconsistently, and while this
is not a functional problem it is rather distracting when working on
them.

Some have ops have consistent indentation, e.g.

| #define ATOMIC_OP_ADD_RETURN(name, mb, cl...)                           \
| static inline int __lse_atomic_add_return##name(int i, atomic_t *v)     \
| {                                                                       \
|         u32 tmp;                                                        \
|                                                                         \
|         asm volatile(                                                   \
|         __LSE_PREAMBLE                                                  \
|         "       ldadd" #mb "    %w[i], %w[tmp], %[v]\n"                 \
|         "       add     %w[i], %w[i], %w[tmp]"                          \
|         : [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp)        \
|         : "r" (v)                                                       \
|         : cl);                                                          \
|                                                                         \
|         return i;                                                       \
| }

While others have negative indentation for some lines, and/or have
misaligned trailing backslashes, e.g.

| static inline void __lse_atomic_##op(int i, atomic_t *v)                        \
| {                                                                       \
|         asm volatile(                                                   \
|         __LSE_PREAMBLE                                                  \
| "       " #asm_op "     %w[i], %[v]\n"                                  \
|         : [i] "+r" (i), [v] "+Q" (v->counter)                           \
|         : "r" (v));                                                     \
| }

This patch makes the indentation consistent and also aligns the trailing
backslashes. This makes the code easier to read for those (like myself)
who are easily distracted by these inconsistencies.

This is intended as a cleanup.
There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211210151410.2782645-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 031af50045ea ("arm64: cmpxchg_double*: hazard against entire exchange variable")
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: lock overflowing for IOPOLL

commit 544d163d659d45a206d8929370d5a2984e546cb7 upstream.

syzbot reports an issue with overflow filling for IOPOLL:

WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0
Workqueue: events_unbound io_ring_exit_work
Call trace:
io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773
io_fill_cqe_req io_uring/io_uring.h:168 [inline]
io_do_iopoll+0x474/0x62c io_uring/rw.c:1065
io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513
io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056
io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863

There is no real problem for normal IOPOLL as flush is also called with
uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL,
for which __io_cqring_overflow_flush() happens from the CQ waiting path.

Reported-and-tested-by: syzbot+6805087452d72929404e@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: Do not return host topology information from KVM_GET_SUPPORTED_CPUID

[ Upstream commit 45e966fcca03ecdcccac7cb236e16eea38cc18af ]

Passing the host topology to the guest is almost certainly wrong
and will confuse the scheduler. In addition, several fields of
these CPUID leaves vary on each processor; it is simply impossible to
return the right values from KVM_GET_SUPPORTED_CPUID in such a way that
they can be passed to KVM_SET_CPUID2.

The values that will most likely prevent confusion are all zeroes.
Userspace will have to override it anyway if it wishes to present a
specific topology to the guest.

Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Documentation: KVM: add API issues section

[ Upstream commit cde363ab7ca7aea7a853851cd6a6745a9e1aaf5e ]

Add a section to document all the different ways in which the KVM API sucks.

I am sure there are way more, give people a place to vent so that userspace
authors are aware.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220322110712.222449-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: Always release pages to the buddy allocator in memblock_free_late().

[ Upstream commit 115d9d77bb0f9152c60b6e8646369fa7f6167593 ]

If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.

In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().

For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.

One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.

For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:

v6.2-rc2:
  # grep -E 'Node|spanned|present|managed' /proc/zoneinfo
  Node 0, zone      DMA
          spanned  4095
          present  3999
          managed  3840
  Node 0, zone    DMA32
          spanned  246652
          present  245868
          managed  178867

v6.2-rc2 + patch:
  # grep -E 'Node|spanned|present|managed' /proc/zoneinfo
  Node 0, zone      DMA
          spanned  4095
          present  3999
          managed  3840
  Node 0, zone    DMA32
          spanned  246652
          present  245868
          managed  222816   # +43,949 pages

Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/surface: aggregator: Add missing call to ssam_request_sync_free()

[ Upstream commit c965daac370f08a9b71d573a71d13cda76f2a884 ]

Although rare, ssam_request_sync_init() can fail. In that case, the
request should be freed via ssam_request_sync_free(). Currently it is
leaked instead. Fix this.

Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221220175608.1436273-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Fix PPS delta between two synchronized end-points

[ Upstream commit 5e91c72e560cc85f7163bbe3d14197268de31383 ]

This patch fix the pulse per second output delta between
two synchronized end-points.

Based on Intel Discrete I225 Software User Manual Section
4.2.15 TimeSync Auxiliary Control Register, ST0[Bit 4] and
ST1[Bit 7] must be set to ensure that clock output will be
toggles based on frequency value defined. This is to ensure
that output of the PPS is aligned with the clock.

How to test:

1) Running time synchronization on both end points.
Ex: ptp4l --step_threshold=1 -m -f gPTP.cfg -i <interface name>

2) Configure PPS output using below command for both end-points
Ex: SDP0 on I225 REV4 SKU variant

./testptp -d /dev/ptp0 -L 0,2
./testptp -d /dev/ptp0 -p 1000000000

3) Measure the output using analyzer for both end-points

Fixes: 87938851b6ef ("igc: enable auxiliary PHC functions for the i225")
Signed-off-by: Christopher S Hall <christopher.s.hall@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf build: Properly guard libbpf includes

[ Upstream commit d891f2b724b39a2a41e3ad7b57110193993242ff ]

Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT.
In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL.

Fixes: d6a735ef3277c45f ("perf bpf_counter: Move common functions to bpf_counter.h")
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Don't support encap rules with gbp option

[ Upstream commit d515d63cae2cd186acf40deaa8ef33067bb7f637 ]

Previously, encap rules with gbp option would be offloaded by mistake but
driver does not support gbp option offload.

To fix this issue, check if the encap rule has gbp option and don't
offload the rule

Fixes: d8f9dfae49ce ("net: sched: allow flower to match vxlan options")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix ptp max frequency adjustment range

[ Upstream commit fe91d57277eef8bb4aca05acfa337b4a51d0bba4 ]

.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb
that can be set for a single call of .adjfine. This means that a single
call to .getfine cannot be greater than .max_adj or less than -(.max_adj).
Provides correct value for max frequency adjustment value supported by
devices.

Fixes: 3d8c38af1493 ("net/mlx5e: Add PTP Hardware Clock (PHC) support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: act_mpls: Fix warning during failed attribute validation

[ Upstream commit 9e17f99220d111ea031b44153fdfe364b0024ff2 ]

The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':

"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"

This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.

Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.

No regressions in MPLS tests:

# ./tdc.py -f tc-tests/actions/mpls.json
[...]
# echo $?
0

[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
<TASK>
__netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2482
___sys_sendmsg net/socket.c:2536 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2565
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Tested-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc: fix the O_* fcntl/open macro definitions for riscv

[ Upstream commit 00b18da4089330196906b9fe075c581c17eb726c ]

When RISCV port was imported in 5.2, the O_* macros were taken with
their octal value and written as-is in hex, resulting in the getdents64()
to fail in nolibc-test.

Fixes: 582e84f7b779 ("tool headers nolibc: add RISCV support") #5.2
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc: restore mips branch ordering in the _start block

[ Upstream commit 184177c3d6e023da934761e198c281344d7dd65b ]

Depending on the compiler used and the optimization options, the sbrk()
test was crashing, both on real hardware (mips-24kc) and in qemu. One
such example is kernel.org toolchain in version 11.3 optimizing at -Os.

Inspecting the sys_brk() call shows the following code:

  0040047c <sys_brk>:
    40047c:       24020fcd        li      v0,4045
    400480:       27bdffe0        addiu   sp,sp,-32
    400484:       0000000c        syscall
    400488:       27bd0020        addiu   sp,sp,32
    40048c:       10e00001        beqz    a3,400494 <sys_brk+0x18>
    400490:       00021023        negu    v0,v0
    400494:       03e00008        jr      ra

It is obviously wrong, the "negu" instruction is placed in beqz's
delayed slot, and worse, there's no nop nor instruction after the
return, so the next function's first instruction (addiu sip,sip,-32)
will also be executed as part of the delayed slot that follows the
return.

This is caused by the ".set noreorder" directive in the _start block,
that applies to the whole program. The compiler emits code without the
delayed slots and relies on the compiler to swap instructions when this
option is not set. Removing the option would require to change the
startup code in a way that wouldn't make it look like the resulting
code, which would not be easy to debug. Instead let's just save the
default ordering before changing it, and restore it at the end of the
_start block. Now the code is correct:

  0040047c <sys_brk>:
    40047c:       24020fcd        li      v0,4045
    400480:       27bdffe0        addiu   sp,sp,-32
    400484:       0000000c        syscall
    400488:       10e00002        beqz    a3,400494 <sys_brk+0x18>
    40048c:       27bd0020        addiu   sp,sp,32
    400490:       00021023        negu    v0,v0
    400494:       03e00008        jr      ra
    400498:       00000000        nop

Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc") #5.0
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc: Remove .global _start from the entry point code

[ Upstream commit 1590c59836dace3a20945bad049fe8802c4e6f3f ]

Building with clang yields the following error:
```
  <inline asm>:3:1: error: _start changed binding to STB_GLOBAL
  .global _start
  ^
  1 error generated.
```
Make sure only specify one between `.global _start` and `.weak _start`.
Remove `.global _start`.

Cc: llvm@lists.linux.dev
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6e0 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc/arch: mark the _start symbol as weak

[ Upstream commit dffeb81af5fe5eedccf5ea4a8a120d8c3accd26e ]

By doing so we can link together multiple C files that have been compiled
with nolibc and which each have a _start symbol.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6e0 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc/arch: split arch-specific code into individual files

[ Upstream commit 271661c1cde5ff47eb7af9946866cd66b70dc328 ]

In order to ease maintenance, this splits the arch-specific code into
one file per architecture. A common file "arch.h" is used to include the
right file among arch-* based on the detected architecture. Projects
which are already split per architecture could simply rename these
files to $arch/arch.h and get rid of the common arch.h. For this
reason, include guards were placed into each arch-specific file.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6e0 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc/types: split syscall-specific definitions into their own files

[ Upstream commit cc7a492ad0a076dff5cb4281b1516676d7924fcf ]

The macros and type definitions used by a number of syscalls were moved
to types.h where they will be easier to maintain. A few of them
are arch-specific and must not be moved there (e.g. O_*, sys_stat_struct).
A warning about them was placed at the top of the file.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6e0 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc/std: move the standard type definitions to std.h

[ Upstream commit 967cce191f50090d5cbd3841ee2bbb7835afeae2 ]

The ordering of includes and definitions for now is a bit of a mess, as
for example asm/signal.h is included after int definitions, but plenty of
structures are defined later as they rely on other includes.

Let's move the standard type definitions to a dedicated file that is
included first. We also move NULL there. This way all other includes
are aware of it, and we can bring asm/signal.h back to the top of the
file.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6e0 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc: use pselect6 on RISCV

[ Upstream commit 9c2970fbb425cca0256ecf0f96490e4f253fda24 ]

This arch doesn't provide the old-style select() syscall, we have to
use pselect6().

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6e0 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc: x86-64: Use `mov $60,%eax` instead of `mov $60,%rax`

[ Upstream commit 7bdc0e7a390511cd3df8194003b908f15a6170a5 ]

Note that mov to 32-bit register will zero extend to 64-bit register.
Thus `mov $60,%eax` has the same effect with `mov $60,%rax`. Use the
shorter opcode to achieve the same thing.
```
b8 3c 00 00 00 mov $60,%eax (5 bytes) [1]
48 c7 c0 3c 00 00 00 mov $60,%rax (7 bytes) [2]
```
Currently, we use [2]. Change it to [1] for shorter code.

Signed-off-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6e0 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/nolibc: x86: Remove `r8`, `r9` and `r10` from the clobber list

[ Upstream commit bf91666959eeac44fb686e9359e37830944beef2 ]

Linux x86-64 syscall only clobbers rax, rcx and r11 (and "memory").

  - rax for the return value.
  - rcx to save the return address.
  - r11 to save the rflags.

Other registers are preserved.

Having r8, r9 and r10 in the syscall clobber list is harmless, but this
results in a missed-optimization.

As the syscall doesn't clobber r8-r10, GCC should be allowed to reuse
their value after the syscall returns to userspace. But since they are
in the clobber list, GCC will always miss this opportunity.

Remove them from the x86-64 syscall clobber list to help GCC generate
better code and fix the comment.

See also the x86-64 ABI, section A.2 AMD64 Linux Kernel Conventions,
A.2.1 Calling Conventions [1].

Extra note:
Some people may think it does not really give a benefit to remove r8,
r9 and r10 from the syscall clobber list because the impression of
syscall is a C function call, and function call always clobbers those 3.

However, that is not the case for nolibc.h, because we have a potential
to inline the "syscall" instruction (which its opcode is "0f 05") to the
user functions.

All syscalls in the nolibc.h are written as a static function with inline
ASM and are likely always inline if we use optimization flag, so this is
a profit not to have r8, r9 and r10 in the clobber list.

Here is the example where this matters.

Consider the following C code:
```
  #include "tools/include/nolibc/nolibc.h"
  #define read_abc(a, b, c) __asm__ volatile("nop"::"r"(a),"r"(b),"r"(c))

  int main(void)
  {
   int a = 0xaa;
   int b = 0xbb;
   int c = 0xcc;

   read_abc(a, b, c);
   write(1, "test\n", 5);
   read_abc(a, b, c);

   return 0;
  }
```

Compile with:
    gcc -Os test.c -o test -nostdlib

With r8, r9, r10 in the clobber list, GCC generates this:

0000000000001000 <main>:
    1000: f3 0f 1e fa           endbr64
    1004: 41 54                 push   %r12
    1006: 41 bc cc 00 00 00     mov    $0xcc,%r12d
    100c: 55                    push   %rbp
    100d: bd bb 00 00 00        mov    $0xbb,%ebp
    1012: 53                    push   %rbx
    1013: bb aa 00 00 00        mov    $0xaa,%ebx
    1018: 90                    nop
    1019: b8 01 00 00 00        mov    $0x1,%eax
    101e: bf 01 00 00 00        mov    $0x1,%edi
    1023: ba 05 00 00 00        mov    $0x5,%edx
    1028: 48 8d 35 d1 0f 00 00 lea    0xfd1(%rip),%rsi
    102f: 0f 05                 syscall
    1031: 90                    nop
    1032: 31 c0                 xor    %eax,%eax
    1034: 5b                    pop    %rbx
    1035: 5d                    pop    %rbp
    1036: 41 5c                 pop    %r12
    1038: c3                    ret

GCC thinks that syscall will clobber r8, r9, r10. So it spills 0xaa,
0xbb and 0xcc to callee saved registers (r12, rbp and rbx). This is
clearly extra memory access and extra stack size for preserving them.

But syscall does not actually clobber them, so this is a missed
optimization.

Now without r8, r9, r10 in the clobber list, GCC generates better code:

0000000000001000 <main>:
    1000: f3 0f 1e fa           endbr64
    1004: 41 b8 aa 00 00 00     mov    $0xaa,%r8d
    100a: 41 b9 bb 00 00 00     mov    $0xbb,%r9d
    1010: 41 ba cc 00 00 00     mov    $0xcc,%r10d
    1016: 90                    nop
    1017: b8 01 00 00 00        mov    $0x1,%eax
    101c: bf 01 00 00 00        mov    $0x1,%edi
    1021: ba 05 00 00 00        mov    $0x5,%edx
    1026: 48 8d 35 d3 0f 00 00 lea    0xfd3(%rip),%rsi
    102d: 0f 05                 syscall
    102f: 90                    nop
    1030: 31 c0                 xor    %eax,%eax
    1032: c3                    ret

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Link: https://gitlab.com/x86-psABIs/x86-64-ABI/-/wikis/x86-64-psABI
Link: https://lore.kernel.org/lkml/20211011040344.437264-1-ammar.faizi@students.amikom.ac.id/
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6e0 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_unix: selftest: Fix the size of the parameter to connect()

[ Upstream commit 7d6ceeb1875cc08dc3d1e558e191434d94840cd5 ]

Adjust size parameter in connect() to match the type of the parameter, to
fix "No such file or directory" error in selftests/net/af_unix/
test_oob_unix.c:127.

The existing code happens to work provided that the autogenerated pathname
is shorter than sizeof (struct sockaddr), which is why it hasn't been
noticed earlier.

Visible from the trace excerpt:

bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060
[pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory)

BUG: The filename is trimmed to sizeof (struct sockaddr).

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()

[ Upstream commit 9dab880d675b9d0dd56c6428e4e8352a3339371d ]

Fix a use-after-free that occurs in hcd when in_urb sent from
pn533_usb_send_frame() is completed earlier than out_urb. Its callback
frees the skb data in pn533_send_async_complete() that is used as a
transfer buffer of out_urb. Wait before sending in_urb until the
callback of out_urb is called. To modify the callback of out_urb alone,
separate the complete function of out_urb and ack_urb.

Found by a modified version of syzkaller.

BUG: KASAN: use-after-free in dummy_timer
Call Trace:
memcpy (mm/kasan/shadow.c:65)
dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352)
transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972)
arch_static_branch (arch/x86/include/asm/jump_label.h:27)
static_key_false (include/linux/jump_label.h:207)
timer_expire_exit (include/trace/events/timer.h:127)
call_timer_fn (kernel/time/timer.c:1475)
expire_timers (kernel/time/timer.c:1519)
__run_timers (kernel/time/timer.c:1790)
run_timer_softirq (kernel/time/timer.c:1803)

Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hvc/xen: lock console list traversal

[ Upstream commit c0dccad87cf68fc6012aec7567e354353097ec1a ]

The currently lockless access to the xen console list in
vtermno_to_xencons() is incorrect, as additions and removals from the
list can happen anytime, and as such the traversal of the list to get
the private console data for a given termno needs to happen with the
lock held. Note users that modify the list already do so with the
lock taken.

Adjust current lock takers to use the _irq{save,restore} helpers,
since the context in which vtermno_to_xencons() is called can have
interrupts disabled. Use the _irq{save,restore} set of helpers to
switch the current callers to disable interrupts in the locked region.
I haven't checked if existing users could instead use the _irq
variant, as I think it's safer to use _irq{save,restore} upfront.

While there switch from using list_for_each_entry_safe to
list_for_each_entry: the current entry cursor won't be removed as
part of the code in the loop body, so using the _safe variant is
pointless.

Fixes: 02e19f9c7cac ('hvc_xen: implement multiconsole support')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221130163611.14686-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix LMAC config in cgx_lmac_rx_tx_enable

[ Upstream commit b4e9b8763e417db31c7088103cc557d55cb7a8f5 ]

PF netdev can request AF to enable or disable reception and transmission
on assigned CGX::LMAC. The current code instead of disabling or enabling
'reception and transmission' also disables/enable the LMAC. This patch
fixes this issue.

Fixes: 1435f66a28b4 ("octeontx2-af: CGX Rx/Tx enable/disable mbox handlers")
Signed-off-by: Angela Czubak <aczubak@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230105160107.17638-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix unexpected link reset due to discovery messages

[ Upstream commit c244c092f1ed2acfb5af3d3da81e22367d3dd733 ]

This unexpected behavior is observed:

node 1                    | node 2
------                    | ------
link is established       | link is established
reboot                    | link is reset
up                        | send discovery message
receive discovery message |
link is established       | link is established
send discovery message    |
                          | receive discovery message
                          | link is reset (unexpected)
                          | send reset message
link is reset             |

It is due to delayed re-discovery as described in function
tipc_node_check_dest(): "this link endpoint has already reset
and re-established contact with the peer, before receiving a
discovery message from that node."

However, commit 598411d70f85 has changed the condition for calling
tipc_node_link_down() which was the acceptance of new media address.

This commit fixes this by restoring the old and correct behavior.

Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Relax hw constraints for implicit fb sync

[ Upstream commit d463ac1acb454fafed58f695cb3067fbf489f3a0 ]

The fix commit the commit e4ea77f8e53f ("ALSA: usb-audio: Always apply
the hw constraints for implicit fb sync") tried to address the bug
where an incorrect PCM parameter is chosen when two (implicit fb)
streams are set up at the same time. This change had, however, some
side effect: once when the sync endpoint is chosen and set up, this
restriction is applied at the next hw params unless it's freed via hw
free explicitly.

This patch is a workaround for the problem by relaxing the hw
constraints a bit for the implicit fb sync. We still keep applying
the hw constraints for implicit fb sync, but only when the matching
sync EP is being used by other streams.

Fixes: e4ea77f8e53f ("ALSA: usb-audio: Always apply the hw constraints for implicit fb sync")
Reported-by: Ruud van Asseldonk <ruud@veniogames.com>
Link: https://lore.kernel.org/r/4e509aea-e563-e592-e652-ba44af6733fe@veniogames.com
Link: https://lore.kernel.org/r/20230102170759.29610-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Make sure to stop endpoints before closing EPs

[ Upstream commit 0599313e26666e79f6e7fe1450588431b8cb25d5 ]

At the PCM hw params, we may re-configure the endpoints and it's done
by a temporary EP close followed by re-open. A potential problem
there is that the EP might be already running internally at the PCM
prepare stage; it's seen typically in the playback stream with the
implicit feedback sync. As this stream start isn't tracked by the
core PCM layer, we'd need to stop it explicitly, and that's the
missing piece.

This patch adds the stop_endpoints() call at snd_usb_hw_params() to
assure the stream stop before closing the EPs.

Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management")
Link: https://lore.kernel.org/r/4e509aea-e563-e592-e652-ba44af6733fe@veniogames.com
Link: https://lore.kernel.org/r/20230102170759.29610-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm8904: fix wrong outputs volume after power reactivation

[ Upstream commit 472a6309c6467af89dbf660a8310369cc9cb041f ]

Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.

Fixes: a91eb199e4dc ("ASoC: Initial WM8904 CODEC driver")
Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221223080247.7258-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery

[ Upstream commit 1a5665fc8d7a000671ebd3fe69c6f9acf1e0dcd9 ]

When SSU/enter hibern8 fail in WLUN suspend flow, trigger the error handler
and return busy to break the suspend. Otherwise the consumer will get
stuck in runtime suspend status.

Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20221208072520.26210-1-peter.wang@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Stop using the clock scaling lock in the error handler

[ Upstream commit 5675c381ea51360b4968b78f23aefda73e3de90d ]

Instead of locking and unlocking the clock scaling lock, surround the
command queueing code with an RCU reader lock and call synchronize_rcu().
This patch prepares for removal of the clock scaling lock.

Link: https://lore.kernel.org/r/20211203231950.193369-16-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 1a5665fc8d7a ("scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in Makefile

[ Upstream commit f0a43ba6c66cc0688e2748d986a1459fdd3442ef ]

When Kconfig item CONFIG_SCSI_MPI3MR was introduced for mpi3mr driver, the
Makefile of the driver was not modified to refer the Kconfig item.

As a result, mpi3mr.ko is built regardless of the Kconfig item value y or
m. Also, if 'make localmodconfig' can not find the Kconfig item in the
Makefile, then it does not generate CONFIG_SCSI_MPI3MR=m even when
mpi3mr.ko is loaded on the system.

Refer to the Kconfig item to avoid the issues.

Fixes: c4f7ac64616e ("scsi: mpi3mr: Add mpi30 Rev-R headers and Kconfig")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20221207023659.2411785-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: da9211: Use irq handler when ready

[ Upstream commit 02228f6aa6a64d588bc31e3267d05ff184d772eb ]

If the system does not come from reset (like when it is kexec()), the
regulator might have an IRQ waiting for us.

If we enable the IRQ handler before its structures are ready, we crash.

This patch fixes:

[    1.141839] Unable to handle kernel read from unreadable memory at virtual address 0000000000000078
[    1.316096] Call trace:
[    1.316101]  blocking_notifier_call_chain+0x20/0xa8
[    1.322757] cpu cpu0: dummy supplies not allowed for exclusive requests
[    1.327823]  regulator_notifier_call_chain+0x1c/0x2c
[    1.327825]  da9211_irq_handler+0x68/0xf8
[    1.327829]  irq_thread+0x11c/0x234
[    1.327833]  kthread+0x13c/0x154

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20221124-da9211-v2-0-1779e3c5d491@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix task CLOSID/RMID update race

commit fe1f0714385fbcf76b0cbceb02b7277d842014fc upstream.

When the user moves a running task to a new rdtgroup using the task's
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.

x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.

Refer to the diagram below:

CPU 0                                   CPU 1
-----                                   -----
__rdtgroup_move_task():
  curr <- t1->cpu->rq->curr
                                        __schedule():
                                          rq->curr <- t1
                                        resctrl_sched_in():
                                          t1->{closid,rmid} -> {1,1}
  t1->{closid,rmid} <- {2,2}
  if (curr == t1) // false
   IPI(t1->cpu)

A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.

In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr().  In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.

It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.

Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.

CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)

  # mkdir /sys/fs/resctrl/test
  # echo $$ > /sys/fs/resctrl/test/tasks
  # perf bench sched messaging -g 40 -l 100000

task-clock time ranges collected using:

  # perf stat rmdir /sys/fs/resctrl/test

Baseline:                     1.54 - 1.60 ms
smp_mb() every matching task: 1.57 - 1.67 ms

  [ bp: Massage commit message. ]

Fixes: ae28d1aae48a ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR")
Fixes: 0efc89be9471 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/device: Fix period calculation in edac_device_reset_delay_period()

commit e84077437902ec99eba0a6b516df772653f142c7 upstream.

Fix period calculation in case user sets a value of 1000.  The input of
round_jiffies_relative() should be in jiffies and not in milli-seconds.

  [ bp: Use the same code pattern as in edac_device_workq_setup() for
    clarity. ]

Fixes: c4cf3b454eca ("EDAC: Rework workqueue handling")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221020124458.22153-1-farbere@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot: Avoid using Intel mnemonics in AT&T syntax asm

commit 7c6dd961d0c8e7e8f9fdc65071fb09ece702e18d upstream.

With 'GNU assembler (GNU Binutils for Debian) 2.39.90.20221231' the
build now reports:

  arch/x86/realmode/rm/../../boot/bioscall.S: Assembler messages:
  arch/x86/realmode/rm/../../boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
  arch/x86/realmode/rm/../../boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant

  arch/x86/boot/bioscall.S: Assembler messages:
  arch/x86/boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
  arch/x86/boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant

Which is due to:

  PR gas/29525

  Note that with the dropped CMPSD and MOVSD Intel Syntax string insn
  templates taking operands, mixed IsString/non-IsString template groups
  (with memory operands) cannot occur anymore. With that
  maybe_adjust_templates() becomes unnecessary (and is hence being
  removed).

More details: https://sourceware.org/bugzilla/show_bug.cgi?id=29525

Borislav Petkov further explains:

  " the particular problem here is is that the 'd' suffix is
    "conflicting" in the sense that you can have SSE mnemonics like movsD %xmm...
    and the same thing also for string ops (which is the case here) so apparently
    the agreement in binutils land is to use the always accepted suffixes 'l' or 'q'
    and phase out 'd' slowly... "

Fixes: 7a734e7dd93b ("x86, setup: "glove box" BIOS calls -- infrastructure")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/Y71I3Ex2pvIxMpsP@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/imc-pmu: Fix use of mutex in IRQs disabled section

commit 76d588dddc459fefa1da96e0a081a397c5c8e216 upstream.

Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP
and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event.

Command to trigger the warning:
  # perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5

   Performance counter stats for 'sleep 5':

                   0      thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/

         5.002117947 seconds time elapsed

         0.000131000 seconds user
         0.001063000 seconds sys

Below is snippet of the warning in dmesg:

  BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
  in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec
  preempt_count: 2, expected: 0
  4 locks held by perf-exec/2869:
   #0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90
   #1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0
   #2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510
   #3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510
  irq event stamp: 4806
  hardirqs last  enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0
  hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510
  softirqs last  enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61
  Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
  Call Trace:
    dump_stack_lvl+0x98/0xe0 (unreliable)
    __might_resched+0x2f8/0x310
    __mutex_lock+0x6c/0x13f0
    thread_imc_event_add+0xf4/0x1b0
    event_sched_in+0xe0/0x210
    merge_sched_in+0x1f0/0x600
    visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0
    ctx_flexible_sched_in+0xcc/0x140
    ctx_sched_in+0x20c/0x2a0
    ctx_resched+0x104/0x1c0
    perf_event_exec+0x340/0x510
    begin_new_exec+0x730/0xef0
    load_elf_binary+0x3f8/0x1e10
  ...
  do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0
  WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0
  CPU: 36 PID: 2869 Comm: sleep Tainted: G        W          6.2.0-rc2-00011-g1247637727f2 #61
  Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
  NIP:  c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670
  REGS: c00000004d2134e0 TRAP: 0700   Tainted: G        W           (6.2.0-rc2-00011-g1247637727f2)
  MSR:  9000000000021033 <SF,HV,ME,IR,DR,RI,LE>  CR: 48002824  XER: 00000000
  CFAR: c00000000013fb64 IRQMASK: 1

The above warning triggered because the current imc-pmu code uses mutex
lock in interrupt disabled sections. The function mutex_lock()
internally calls __might_resched(), which will check if IRQs are
disabled and in case IRQs are disabled, it will trigger the warning.

Fix the issue by changing the mutex lock to spinlock.

Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Fix comments, trim oops in change log, add reported-by tags]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230106065157.182648-1-kjain@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function.

commit 9ea4b476cea1b7d461d16dda25ca3c7e616e2d15 upstream.

When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of
an arithmetic expression 2 << (netmask - mask_bits - 1) is subject
to overflow due to a failure casting operands to a larger data type
before performing the arithmetic.

Note that it's harmless since the value will be checked at the next step.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: b9fed748185a ("netfilter: ipset: Check and reject crazy /0 input parameters")
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/core: Fix use-after-free bug in dup_user_cpus_ptr()

commit 87ca4f9efbd7cc649ff43b87970888f2812945b8 upstream.

Since commit 07ec77a1d4e8 ("sched: Allow task CPU affinity to be
restricted on asymmetric systems"), the setting and clearing of
user_cpus_ptr are done under pi_lock for arm64 architecture. However,
dup_user_cpus_ptr() accesses user_cpus_ptr without any lock
protection. Since sched_setaffinity() can be invoked from another
process, the process being modified may be undergoing fork() at
the same time. When racing with the clearing of user_cpus_ptr in
__set_cpus_allowed_ptr_locked(), it can lead to user-after-free and
possibly double-free in arm64 kernel.

Commit 8f9ea86fdf99 ("sched: Always preserve the user requested
cpumask") fixes this problem as user_cpus_ptr, once set, will never
be cleared in a task's lifetime. However, this bug was re-introduced
in commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in
do_set_cpus_allowed()") which allows the clearing of user_cpus_ptr in
do_set_cpus_allowed(). This time, it will affect all arches.

Fix this bug by always clearing the user_cpus_ptr of the newly
cloned/forked task before the copying process starts and check the
user_cpus_ptr state of the source task under pi_lock.

Note to stable, this patch won't be applicable to stable releases.
Just copy the new dup_user_cpus_ptr() function over.

Fixes: 07ec77a1d4e8 ("sched: Allow task CPU affinity to be restricted on asymmetric systems")
Fixes: 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()")
Reported-by: David Wang 王标 <wangbiao3@xiaomi.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221231041120.440785-2-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()

commit 142e821f68cf5da79ce722cb9c1323afae30e185 upstream.

A clk, prepared and enabled in mtk_iommu_v1_hw_init(), is not released in
the error handling path of mtk_iommu_v1_probe().

Add the corresponding clk_disable_unprepare(), as already done in the
remove function.

Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/593e7b7d97c6e064b29716b091a9d4fd122241fb.1671473163.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/iova: Fix alloc iova overflows issue

commit dcdb3ba7e2a8caae7bfefd603bc22fd0ce9a389c upstream.

In __alloc_and_insert_iova_range, there is an issue that retry_pfn
overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when
iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will
overflow. As a result, if the retry logic is executed, low_pfn is
updated to 0, and then new_pfn < low_pfn returns false to make the
allocation successful.

This issue occurs in the following two situations:
1. The first iova size exceeds the domain size. When initializing
iova domain, iovad->cached_node is assigned as iovad->anchor. For
example, the iova domain size is 10M, start_pfn is 0x1_F000_0000,
and the iova size allocated for the first time is 11M. The
following is the log information, new->pfn_lo is smaller than
iovad->cached_node.

Example log as follows:
[ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00
[ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff

2. The node with the largest iova->pfn_lo value in the iova domain
is deleted, iovad->cached_node will be updated to iovad->anchor,
and then the alloc iova size exceeds the maximum iova size that can
be allocated in the domain.

After judging that retry_pfn is less than limit_pfn, call retry_pfn+1
to fix the overflow issue.

Signed-off-by: jianjiao zeng <jianjiao.zeng@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.15.*
Fixes: 4e89dce72521 ("iommu/iova: Retry from last rb tree node if iova search fails")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230111063801.25107-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ulpi: defer ulpi_register on ulpi_read_id timeout

[ Upstream commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac ]

Since commit 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral
if extcon is present") Dual Role support on Intel Merrifield platform
broke due to rearranging the call to dwc3_get_extcon().

It appears to be caused by ulpi_read_id() on the first test write failing
with -ETIMEDOUT. Currently ulpi_read_id() expects to discover the phy via
DT when the test write fails and returns 0 in that case, even if DT does not
provide the phy. As a result usb probe completes without phy.

Make ulpi_read_id() return -ETIMEDOUT to its user if the first test write
fails. The user should then handle it appropriately. A follow up patch
will make dwc3_core_init() set -EPROBE_DEFER in this case and bail out.

Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221205201527.13525-2-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: mhi: host: Fix race between channel preparation and M0 event

[ Upstream commit 869a99907faea6d1835b0bd0d0422ae3519c6ea9 ]

There is a race condition where mhi_prepare_channel() updates the
read and write pointers as the base address and in parallel, if
an M0 transition occurs, the tasklet goes ahead and rings
doorbells for all channels with a delta in TRE rings assuming
they are already enabled. This causes a null pointer access. Fix
it by adding a channel enabled check before ringing channel
doorbells.

Cc: stable@vger.kernel.org # 5.19
Fixes: a6e2e3522f29 "bus: mhi: core: Add support for PM state transitions"
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1665889532-13634-1-git-send-email-quic_qianyu@quicinc.com
[mani: CCed stable list]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: raw: Deduct extension header length in rawv6_push_pending_frames

commit cb3e9864cdbe35ff6378966660edbcbac955fe17 upstream.

The total cork length created by ip6_append_data includes extension
headers, so we must exclude them when comparing them against the
IPV6_CHECKSUM offset which does not include extension headers.

Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Fixes: 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: fix pci device refcount leak

commit b93fb4405fcb5112c5739c5349afb52ec7f15c07 upstream.

As the comment of pci_get_domain_bus_and_slot() says, it
returns a PCI device with refcount incremented, when finish
using it, the caller must decrement the reference count by
calling pci_dev_put().

In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(),
pci_dev_put() is called to avoid leak.

Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe

commit ad75bd85b1db69c97eefea07b375567821f6ef58 upstream.

The 0x153 version of the kbd backlight control SNC handle has no separate
address to probe if the backlight is there.

This turns the probe call into a set keyboard backlight call with a value
of 0 turning off the keyboard backlight.

Skip probing when there is no separate probe address to avoid this.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1583752
Fixes: 800f20170dcf ("Keyboard backlight control for some Vaio Fit models")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mattia Dongili <malattia@linux.it>
Link: https://lore.kernel.org/r/20221213122943.11123-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm/dsi: Don't require vcca-supply on 14nm PHY

commit a2117773c839a8439a3771e0c040b5c505b083a7 upstream.

On some SoCs (hello SM6115) vcca-supply is not wired to any smd-rpm
or rpmh regulator, but instead powered by the VDD_MX line, which is
voted for in the DSI ctrl node.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 8fc939e72ff8 ("dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/513555/
Link: https://lore.kernel.org/r/20221130135807.45028-1-konrad.dybcio@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm/dsi: Don't require vdds-supply on 10nm PHY

commit ef11cb7a29c0e13031c968190ea8f86104e7fb6a upstream.

On some SoCs (hello SM6350) vdds-supply is not wired to any smd-rpm
or rpmh regulator, but instead powered by the VDD_MX/mx.lvl line,
which is voted for in the DSI ctrl node.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: 8fc939e72ff8 ("dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511889/
Link: https://lore.kernel.org/r/20221116163218.42449-1-konrad.dybcio@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer

commit 1cba0d150fa102439114a91b3e215909efc9f169 upstream.

There are 3 possible interrupt sources are handled by DP controller,
HPDstatus, Controller state changes and Aux read/write transaction.
At every irq, DP controller have to check isr status of every interrupt
sources and service the interrupt if its isr status bits shows interrupts
are pending. There is potential race condition may happen at current aux
isr handler implementation since it is always complete dp_aux_cmd_fifo_tx()
even irq is not for aux read or write transaction. This may cause aux read
transaction return premature if host aux data read is in the middle of
waiting for sink to complete transferring data to host while irq happen.
This will cause host's receiving buffer contains unexpected data. This
patch fixes this problem by checking aux isr and return immediately at
aux isr handler if there are no any isr status bits set.

Current there is a bug report regrading eDP edid corruption happen during
system booting up. After lengthy debugging to found that VIDEO_READY
interrupt was continuously firing during system booting up which cause
dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data
from aux hardware buffer which is not yet contains complete data transfer
from sink. This cause edid corruption.

Follows are the signature at kernel logs when problem happen,
EDID has corrupt header
panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID

Changes in v2:
-- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr()
-- add more commit text

Changes in v3:
-- add Stephen suggested
-- dp_aux_isr() return IRQ_XXX back to caller
-- dp_ctrl_isr() return IRQ_XXX back to caller

Changes in v4:
-- split into two patches

Changes in v5:
-- delete empty line between tags

Changes in v6:
-- remove extra "that" and fixed line more than 75 char at commit text

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516121/
Link: https://lore.kernel.org/r/1672193785-11003-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: ideapad-laptop: Add Legion 5 15ARH05 DMI id to set_fn_lock_led_list[]

commit f4b7f8febd4d9b615fbec2a06bf352b9c3729b11 upstream.

The Lenovo Legion 5 15ARH05 needs ideapad-laptop to call SALS_FNLOCK_ON /
SALS_FNLOCK_OFF on Fn-lock state change to get the LED in the Fn key to
correctly reflect the Fn-lock state.

Add a DMI match for the Legion 5 15ARH05 to the set_fn_lock_led_list[]
table for this.

Fixes: 81a5603a0f50 ("platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221215154357.123876-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm: dsi-phy-28nm: Add missing qcom, dsi-phy-regulator-ldo-mode

commit be79f805a1e1b95605c825f1c513bdd2c8b167ed upstream.

Add in missing qcom,dsi-phy-regulator-ldo-mode to the 28nm DSI PHY.
When converting from .txt to .yaml we missed this one.

Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516205/
Link: https://lore.kernel.org/r/20221229124438.504770-2-bryan.odonoghue@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm: dsi-controller-main: Fix description of core clock

commit 654ffe4b793b42ed6b5909daff0b91809916d94e upstream.

There's a typo in describing the core clock as an 'escape' clock. The
accurate description is 'core'.

Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515938/
Link: https://lore.kernel.org/r/20221223021025.1646636-4-bryan.odonoghue@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm: dsi-controller-main: Fix power-domain constraint

commit a6f033938beb31f893302a93f83ec0b6460c6cac upstream.

power-domain is required for the sc7180 dispcc GDSC but not every qcom SoC
has a similar dependency for example the apq8064.

Most Qcom SoC's using mdss-dsi-ctrl seem to have the ability to
power-collapse the MDP without collapsing DSI.

For example the qcom vendor kernel commit for apq8084, msm8226, msm8916,
msm8974.

https://review.carbonrom.org/plugins/gitiles/CarbonROM/android_kernel_oneplus_msm8994/+/7b5c011a770daa2811778937ed646237a28a8694

"ARM: dts: msm: add mdss gdsc supply to dsi controller device

It is possible for the DSI controller to be active when MDP is
power collapsed. DSI controller needs to have it's own vote for
mdss gdsc to ensure that gdsc remains on in such cases."

This however doesn't appear to be the case for the apq8064 so we shouldn't
be marking power-domain as required in yaml checks.

Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515958/
Link: https://lore.kernel.org/r/20221223021025.1646636-3-bryan.odonoghue@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/adreno: Make adreno quirks not overwrite each other

commit 13ef096e342b00e30b95a90c6c13eee1f0bec4c5 upstream.

So far the adreno quirks have all been assigned with an OR operator,
which is problematic, because they were assigned consecutive integer
values, which makes checking them with an AND operator kind of no bueno..

Switch to using BIT(n) so that only the quirks that the programmer chose
are taken into account when evaluating info->quirks & ADRENO_QUIRK_...

Fixes: 370063ee427a ("drm/msm/adreno: Add A540 support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516456/
Link: https://lore.kernel.org/r/20230102100201.77286-1-konrad.dybcio@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: msm: dsi-controller-main: Fix operating-points-v2 constraint

commit cdf64343f91a1225e9e3d4ce4261962cd41b4ddd upstream.

The existing msm8916.dtsi does not depend on nor require operating points.

Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515940/
Link: https://lore.kernel.org/r/20221223021025.1646636-2-bryan.odonoghue@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: dell-privacy: Fix SW_CAMERA_LENS_COVER reporting

commit 1af7fef0d9d3fa075bf4e850f705df1fe97d33ce upstream.

Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry
and get the value of the switch from the status field when handling
SW_CAMERA_LENS_COVER events, instead of always reporting 0.

Also correctly set the initial SW_CAMERA_LENS_COVER value.

Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/surface: aggregator: Ignore command messages not intended for us

commit ae0fa0a3126a86c801c3220fcd8eefe03aa39f3e upstream.

It is possible that we (the host/kernel driver) receive command messages
that are not intended for us. Ignore those for now.

The whole story is a bit more complicated: It is possible to enable
debug output on SAM, which is sent via SSH command messages. By default
this output is sent to a debug connector, with its own target ID
(TID=0x03). It is possible to override the target of the debug output
and set it to the host/kernel driver. This, however, does not change the
original target ID of the message. Meaning, we receive messages with
TID=0x03 (debug) but expect to only receive messages with TID=0x00
(host).

The problem is that the different target ID also comes with a different
scope of request IDs. In particular, these do not follow the standard
event rules (i.e. do not fall into a set of small reserved values).
Therefore, current message handling interprets them as responses to
pending requests and tries to match them up via the request ID. However,
these debug output messages are not in fact responses, and therefore
this will at best fail to find the request and at worst pass on the
wrong data as response for a request.

Therefore ignore any command messages not intended for us (host) for
now. We can implement support for the debug messages once we have a
better understanding of them.

Note that this may also provide a bit more stability and avoid some
driver confusion in case any other targets want to talk to us in the
future, since we don't yet know what to do with those as well. A warning
for the dropped messages should suffice for now and also give us a
chance of discovering new targets if they come along without any
potential for bugs/instabilities.

Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if present

commit 6dc485f9940df8105ea729cbeb7a7d18d409dde5 upstream.

Unlike keys where userspace only reacts to keypresses, userspace may act
on switches in both (0 and 1) of their positions.

For example if a SW_TABLET_MODE switch is registered then GNOME will not
automatically show the onscreen keyboard when a text field gets focus on
touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE
reports 1 libinput will block (filter out) builtin keyboard and touchpad
events.

So to avoid unwanted side-effects EV_SW type inputs should only be
registered if they are actually present, only register SW_CAMERA_LENS_COVER
if it is actually there.

Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix uninitialized memory read for smb311 posix symlink create

commit a152d05ae4a71d802d50cf9177dba34e8bb09f68 upstream.

If smb311 posix is enabled, we send the intended mode for file
creation in the posix create context. Instead of using what's there on
the stack, create the mfsymlink file with 0644.

Fixes: ce558b0e17f8a ("smb3: Add posix create context for smb3.11 posix mounts")
Cc: stable@vger.kernel.org
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Set action fwd flag when parsing tc action goto

commit 7f8770c71646cf93abdf3fea8b7733aaec4c82a3 upstream.

Do it when parsing like in other actions instead of when
checking if goto is supported in current scenario.

Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Cc: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gt: Reset twice

commit d3de5616d36462a646f5b360ba82d3b09ff668eb upstream.

After applying an engine reset, on some platforms like Jasperlake, we
occasionally detect that the engine state is not cleared until shortly
after the resume. As we try to resume the engine with volatile internal
state, the first request fails with a spurious CS event (it looks like
it reports a lite-restore to the hung context, instead of the expected
idle->active context switch).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212161338.1007659-1-andi.shyti@linux.intel.com
(cherry picked from commit 3db9d590557da3aa2c952f2fecd3e9b703dad790)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/virtio: Fix GEM handle creation UAF

commit 52531258318ed59a2dc5a43df2eaf0eb1d65438e upstream.

Userspace can guess the handle value and try to race GEM object creation
with handle close, resulting in a use-after-free if we dereference the
object after dropping the handle's reference. For that reason, dropping
the handle's reference must be done *after* we are done dereferencing
the object.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Fixes: 62fb7a5e1096 ("virtio-gpu: add 3d/virgl support")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216233355.542197-2-robdclark@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()

commit e3f360db08d55a14112bd27454e616a24296a8b0 upstream.

Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only
dereferenced once by using READ_ONCE(). Otherwise the compiler could
generate incorrect code.

Cc: <stable@vger.kernel.org>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops

commit 82d3edb50a11bf3c5ef63294d5358ba230181413 upstream.

The current cmpxchg_double() loops within the perf hw sampling code do not
have READ_ONCE() semantics to read the old value from memory. This allows
the compiler to generate code which reads the "old" value several times
from memory, which again allows for inconsistencies.

For example:

        /* Reset trailer (using compare-double-and-swap) */
        do {
                te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK;
                te_flags |= SDB_TE_ALERT_REQ_MASK;
        } while (!cmpxchg_double(&te->flags, &te->overflow,
                 te->flags, te->overflow,
                 te_flags, 0ULL));

The compiler could generate code where te->flags used within the
cmpxchg_double() call may be refetched from memory and which is not
necessarily identical to the previous read version which was used to
generate te_flags. Which in turn means that an incorrect update could
happen.

Fix this by adding READ_ONCE() semantics to all cmpxchg_double()
loops. Given that READ_ONCE() cannot generate code on s390 which atomically
reads 16 bytes, use a private compare-and-swap-double implementation to
achieve that.

Also replace cmpxchg_double() with the private implementation to be able to
re-use the old value within the loops.

As a side effect this converts the whole code to only use bit fields
to read and modify bits within the hws trailer header.

Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: qcom: lpass-cpu: Fix fallback SD line index handling

commit 000bca8d706d1bf7cca01af75787247c5a2fdedf upstream.

These indices should reference the ID placed within the dai_driver
array, not the indices of the array itself.

This fixes commit 4ff028f6c108 ("ASoC: qcom: lpass-cpu: Make I2S SD
lines configurable"), which among others, broke IPQ8064 audio
(sound/soc/qcom/lpass-ipq806x.c) because it uses ID 4 but we'd stop
initializing the mi2s_playback_sd_mode and mi2s_capture_sd_mode arrays
at ID 0.

Fixes: 4ff028f6c108 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231061545.2110253-1-computersforpeace@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kexec: fix ipl report address for kdump

commit c2337a40e04dde1692b5b0a46ecc59f89aaba8a1 upstream.

This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.

On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.

The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.

Cc: <stable@vger.kernel.org>
Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf auxtrace: Fix address filter duplicate symbol selection

commit cf129830ee820f7fc90b98df193cd49d49344d09 upstream.

When a match has been made to the nth duplicate symbol, return
success not error.

Example:

  Before:

    $ cat file.c
    cat: file.c: No such file or directory
    $ cat file1.c
    #include <stdio.h>

    static void func(void)
    {
            printf("First func\n");
    }

    void other(void);

    int main()
    {
            func();
            other();
            return 0;
    }
    $ cat file2.c
    #include <stdio.h>

    static void func(void)
    {
            printf("Second func\n");
    }

    void other(void)
    {
            func();
    }

    $ gcc -Wall -Wextra -o test file1.c file2.c
    $ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
    Multiple symbols with name 'func'
    #1      0x1149  l       func
                    which is near           main
    #2      0x1179  l       func
                    which is near           other
    Disambiguate symbol name by inserting #n after the name e.g. func #2
    Or select a global symbol by inserting #0 or #g or #G
    Failed to parse address filter: 'filter func @ ./test'
    Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
    Where multiple filters are separated by space or comma.
    $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
    Failed to parse address filter: 'filter func #2 @ ./test'
    Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
    Where multiple filters are separated by space or comma.

  After:

    $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
    First func
    Second func
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.016 MB perf.data ]
    $ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
    1231062.526977619:   tr strt                               0 [unknown] =>     558495708179 func
    1231062.526977619:   tr end  call               558495708188 func =>     558495708050 _init
    1231062.526979286:   tr strt                               0 [unknown] =>     55849570818d func
    1231062.526979286:   tr end  return             55849570818f func =>     55849570819d other

Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: add aux timestamps fifo clearance wait

commit ae9dcb91c6069e20b3b9505d79cbc89fd6e086f5 upstream.

Add timeout polling wait for auxiliary timestamps snapshot FIFO clear bit
(ATSFC) to clear. This is to ensure no residue fifo value is being read
erroneously.

Fixes: f4da56529da6 ("net: stmmac: Add support for external trigger timestamping")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Link: https://lore.kernel.org/r/20230111050200.2130-1-noor.azura.ahmad.tarmizi@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>