platform/kernel/u-boot.git
13 years agoFix incorrect array size of phy settings for 405EX
Weirich, Bernhard [Thu, 8 Sep 2011 16:27:38 +0000 (18:27 +0200)]
Fix incorrect array size of phy settings for 405EX

Change bd_t->bi_phy* arrays from 1 to 2 for PPC405EX since
405EX has 2 ethernet interfaces.

Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net>
Signed-off-by: Stefan Roese <sr@denx.de>
13 years agoDA830: Fix Build Warning
Sandeep Paulraj [Tue, 13 Sep 2011 09:56:56 +0000 (09:56 +0000)]
DA830: Fix Build Warning

This commit fixes a build warning in the DA830 EVM build

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoled: remove camel casing of led identifiers globally
Jason Kridner [Sun, 4 Sep 2011 18:40:16 +0000 (14:40 -0400)]
led: remove camel casing of led identifiers globally

Result of running the following command to address Wolfgang's
comment about camel case:

for file in `find . | grep '\.[chS]$'`; do perl -i -pe
's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; done

Discussion:
http://patchwork.ozlabs.org/patch/84988/

Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoomap4: fix pad configuration settings for SDP and Panda
Aneesh V [Thu, 8 Sep 2011 15:06:06 +0000 (11:06 -0400)]
omap4: fix pad configuration settings for SDP and Panda

omap4: fix pad configuration settings for SDP and Panda

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sebastien Jan <s-jan@ti.com>
Signed-off-by: David Anders <x0132446@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoomap4: IO settings
Aneesh V [Thu, 8 Sep 2011 15:05:56 +0000 (11:05 -0400)]
omap4: IO settings

Tuning some IO settings for better performance and power.
And consolidate all such IO settings at one place.

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoomap4: make SDRAM init work for ES1.0 silicon
Aneesh V [Thu, 8 Sep 2011 15:05:53 +0000 (11:05 -0400)]
omap4: make SDRAM init work for ES1.0 silicon

SDRAM init was not working on ES1.0 due to a programming
error. A pointer that was passed by value to a function
was set in function emif_get_device_details(), but the effect
wouldn't be seen in the calling function. The issue came
out while testing for ES1.0 because ES1.0 doesn't have any
SDRAM chips connected to CS1

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoomap4: factor out common part from board config headers
Aneesh V [Thu, 8 Sep 2011 15:05:49 +0000 (11:05 -0400)]
omap4: factor out common part from board config headers

Factor out common parts from omap4_sdp4430.h and omap4_panda.h
into a new file omap4_common.h

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoomap: gpio: Adapt board files to use generic API
Sanjeev Premi [Thu, 8 Sep 2011 14:51:01 +0000 (10:51 -0400)]
omap: gpio: Adapt board files to use generic API

This patch contains updates the sources in the board files
to use the generic API.

Signed-off-by: Sanjeev Premi <premi@ti.com>
13 years agoomap: gpio: generic changes after changing API
Sanjeev Premi [Thu, 8 Sep 2011 14:48:39 +0000 (10:48 -0400)]
omap: gpio: generic changes after changing API

This patch contains the generic changes required after
change to generic API in the previous patch.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoomap: gpio: Use generic API
Sanjeev Premi [Thu, 8 Sep 2011 14:47:25 +0000 (10:47 -0400)]
omap: gpio: Use generic API

Convert all OMAP specific functions to use the common API
definitions in include/asm/gpio.h. In the process, made
few additional changes:
 - Use -EINVAL consistently. -1 was used in many places.
 - Removed one-liner static functions that were used only
   once. Replaced the content as necessary.
 - Combines implementation of functions omap_get_gpio_dataout()
   and omap_get_gpio_datain(). To do so, new static function
   _get_gpio_direction() was added.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoOMAP3 Beagle: Minor config cleanup
Sandeep Paulraj [Mon, 5 Sep 2011 15:25:20 +0000 (11:25 -0400)]
OMAP3 Beagle: Minor config cleanup

This patch removes a hardcoded MAC address

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoda830: modify the MEMTEST start and end address
Nagabhushana Netagunte [Sun, 4 Sep 2011 19:08:47 +0000 (15:08 -0400)]
da830: modify the MEMTEST start and end address

Modify the MEMTEST start and end address. The memtest range was overlapping the
CONFIG_SYS_LOAD_ADDR which causes the uImage to be corrupt.Also, modify the
size for which mtest is run to 32MB from 16MB.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoda830: enable SPI flash boot mode
Nagabhushana Netagunte [Sun, 4 Sep 2011 19:05:38 +0000 (15:05 -0400)]
da830: enable SPI flash boot mode

Enable SPI flash boot mode in configuration file as default.
With the introduction of 456MHz part, SPI operating frequency
will increase and at this frequency SPI does not work correctly.
Hence reduce the default SPI speed to 30MHz from 50MHz.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoda830: modify the U-Boot prompt string
Nagabhushana Netagunte [Sun, 4 Sep 2011 18:59:01 +0000 (14:59 -0400)]
da830: modify the U-Boot prompt string

Modify U-boot promt string from 'DA830-evm >' to 'U-Boot >' as
there are many variants of da830 based boards which have diffrent
names such as L137, AM1707 etc.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoARMV7: OMAP3: Add 37xx ESx revision numbers.
Howard D. Gray [Sun, 4 Sep 2011 18:11:17 +0000 (14:11 -0400)]
ARMV7: OMAP3: Add 37xx ESx revision numbers.

OMAP3: Add 37xx ESx revision numbers.

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Signed-off-by: Howard D. Gray <howard.gray@matrix-vision.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible
Michael Jones [Wed, 27 Jul 2011 18:01:55 +0000 (14:01 -0400)]
ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoARMV7: OMAP: Write more than 1 byte at a time in i2c_write
Michael Jones [Sun, 4 Sep 2011 18:01:55 +0000 (14:01 -0400)]
ARMV7: OMAP: Write more than 1 byte at a time in i2c_write

This allows the EEPROM layer to send a single i2c write command
per page, and wait CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS between
i2c write commands.

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoOMAP: Add function to get state of a GPIO output
Joel A Fernandes [Sun, 4 Sep 2011 16:10:03 +0000 (11:10 -0500)]
OMAP: Add function to get state of a GPIO output

Read directly from OMAP_GPIO_DATAOUT to get the output state of the GPIO pin

Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoMX25: tx25: Cleanup tx25.h config
Fabio Estevam [Tue, 30 Aug 2011 05:44:15 +0000 (05:44 +0000)]
MX25: tx25: Cleanup tx25.h config

Cleanup tx25.h by removing unnecessary defines and by removing unneeded "1"'s.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
13 years agoMX25: tx25: Fix build by making use of GPIO framework
Fabio Estevam [Mon, 29 Aug 2011 04:27:06 +0000 (04:27 +0000)]
MX25: tx25: Fix build by making use of GPIO framework

Make use of GPIO framework and avoid the following build error:

tx25.c: In function 'tx25_fec_init':
tx25.c:73: error: dereferencing pointer to incomplete type
tx25.c:74: error: dereferencing pointer to incomplete type
tx25.c:75: error: dereferencing pointer to incomplete type
tx25.c:76: error: dereferencing pointer to incomplete type
tx25.c:83: error: dereferencing pointer to incomplete type
tx25.c:84: error: dereferencing pointer to incomplete type
tx25.c:114: error: dereferencing pointer to incomplete type
tx25.c:115: error: dereferencing pointer to incomplete type
tx25.c:116: error: dereferencing pointer to incomplete type
tx25.c:117: error: dereferencing pointer to incomplete type
tx25.c:124: error: dereferencing pointer to incomplete type
tx25.c:125: error: dereferencing pointer to incomplete type
tx25.c:126: error: dereferencing pointer to incomplete type

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
13 years agoomap3: beagle: Fix build warning
Sanjeev Premi [Mon, 5 Sep 2011 00:25:53 +0000 (00:25 +0000)]
omap3: beagle: Fix build warning

This patch fixes the warning dure to recent changes to the board
configuration:
cmd_i2c.o cmd_i2c.c -c
cmd_i2c.c:109:1: warning: missing braces around initializer
cmd_i2c.c:109:1: warning: (near initialization for 'i2c_no_probes[0]')

Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Acked-by: Jason Kridner <jdk@ti.com>
13 years agoPrepare v2011.09 v2011.09-rc1
Wolfgang Denk [Sun, 11 Sep 2011 19:31:04 +0000 (21:31 +0200)]
Prepare v2011.09

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agoMinor coding style cleanup.
Wolfgang Denk [Sun, 11 Sep 2011 19:24:09 +0000 (21:24 +0200)]
Minor coding style cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agoARM: hawkboard: fix compilation of nand_spl
Wolfgang Denk [Sat, 10 Sep 2011 20:26:28 +0000 (22:26 +0200)]
ARM: hawkboard: fix compilation of nand_spl

Fix build problem:

nand_spl/board/davinci/da8xxevm/hawkboard_nand_spl.c: In function 'board_init_f':
nand_spl/board/davinci/da8xxevm/hawkboard_nand_spl.c:132: warning: implicit declaration of function 'nand_boot'
nand_spl/board/davinci/da8xxevm/hawkboard_nand_spl.c:133: warning: 'noreturn' function does return

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Syed Mohammed Khasim <sm.khasim@gmail.com>
Cc: Sughosh Ganu <urwithsughosh@gmail.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
13 years agocm4008, cm41xx: fix build warnings
Wolfgang Denk [Sat, 10 Sep 2011 14:59:02 +0000 (16:59 +0200)]
cm4008, cm41xx: fix build warnings

Fix these:
cm4008.c: In function 'board_eth_init':
cm4008.c:79: warning: implicit declaration of function 'ks8695_eth_initialize'

cm41xx.c: In function 'board_eth_init':
cm41xx.c:79: warning: implicit declaration of function 'ks8695_eth_initialize'

While we are at it, sort include list in netdev.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Greg Ungerer <greg.ungerer@opengear.com>
13 years agotegra2: fix warning: "assert" redefined
Wolfgang Denk [Sat, 10 Sep 2011 14:17:25 +0000 (16:17 +0200)]
tegra2: fix warning: "assert" redefined

Commit 21726a7 "Add assert() for debug assertions" caused build
warnings for all tegra2 based boards:

clock.c:36:1: warning: "assert" redefined
In file included from clock.c:29:
include/common.h:144:1: warning: this is the location of the previous definition

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
13 years agoARM: hawkboard_nand: fix compilation of nand_spl
Stefano Babic [Fri, 9 Sep 2011 03:09:02 +0000 (03:09 +0000)]
ARM: hawkboard_nand: fix compilation of nand_spl

get_ram_size() is called, but memsize.c is not compiled.

Signed-off-by: Stefano Babic <sbabic@denx.de>
13 years agoKS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH
Greg Ungerer [Sat, 10 Sep 2011 08:40:34 +0000 (18:40 +1000)]
KS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH

Trivial conversion of the ks8695eth driver to a CONFIG_MULTI_ETH type
driver.

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
13 years agoCM41xx: fix signedness of env bootargs string pointer
Greg Ungerer [Sat, 10 Sep 2011 08:37:21 +0000 (18:37 +1000)]
CM41xx: fix signedness of env bootargs string pointer

The pointer to the flash based bootargs should be a "char *", not unsigned.
Fixes:

cm41xx.c: In function ‘env_flash_cmdline’:
cm41xx.c:67: warning: pointer targets in passing argument 2 of ‘setenv’ differ in signedness

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
13 years agoCM4008: fix signedness of env bootargs string pointer
Greg Ungerer [Sat, 10 Sep 2011 08:36:40 +0000 (18:36 +1000)]
CM4008: fix signedness of env bootargs string pointer

The pointer to the flash based bootargs should be a "char *", not unsigned.
Fixes:

cm4008.c: In function ‘env_flash_cmdline’:
cm4008.c:67: warning: pointer targets in passing argument 2 of ‘setenv’ differ in signedness

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
13 years agoutx8245: fix build breakage due to assert()
Wolfgang Denk [Sat, 10 Sep 2011 14:04:12 +0000 (16:04 +0200)]
utx8245: fix build breakage due to assert()

Commit 21726a7 "Add assert() for debug assertions" broke building the
utx8245 board:

dlmalloc.c: In function 'do_check_chunk':
dlmalloc.c:1660: error: 'sz' undeclared (first use in this function)
dlmalloc.c:1660: error: (Each undeclared identifier is reported only once
dlmalloc.c:1660: error: for each function it appears in.)
dlmalloc.c: In function 'do_check_free_chunk':
dlmalloc.c:1689: error: 'next' undeclared (first use in this function)
dlmalloc.c: In function 'do_check_malloced_chunk':
dlmalloc.c:1748: error: 'sz' undeclared (first use in this function)
dlmalloc.c:1750: error: 'room' undeclared (first use in this function)

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
13 years agoUBIFS: fix warning: format '%lX' expects type 'long unsigned int'
Wolfgang Denk [Fri, 9 Sep 2011 22:41:14 +0000 (00:41 +0200)]
UBIFS: fix warning: format '%lX' expects type 'long unsigned int'

Commit 46d7274 "UBIFS: Change ubifsload to set the filesize variable"
introduced the follwing compiler warning:

ubifs.c: In function 'ubifs_load':
ubifs.c:742: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'u32'

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
13 years agoFix warning: "assert" redefined
Wolfgang Denk [Fri, 9 Sep 2011 22:31:11 +0000 (00:31 +0200)]
Fix warning: "assert" redefined

Commit 21726a7 "Add assert() for debug assertions" caused build
warnings for many systems:

In file included from bedbug.c:6:
/home/wd/git/u-boot/work/include/bedbug/bedbug.h:24:1: warning: "assert" redefined
In file included from bedbug.c:3:
/home/wd/git/u-boot/work/include/common.h:144:1: warning: this is the location of the previous definition
In file included from cmd_bedbug.c:10:
/home/wd/git/u-boot/work/include/bedbug/bedbug.h:24:1: warning: "assert" redefined
In file included from cmd_bedbug.c:5:
/home/wd/git/u-boot/work/include/common.h:144:1: warning: this is the location of the previous definition

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
13 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Fri, 9 Sep 2011 22:17:42 +0000 (00:17 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

* 'master' of git://git.denx.de/u-boot-mpc85xx:
  powerpc/mpc8610hpcd: set pci1_hose.config_table after fsl_setup_hose
  powerpc/mpc8548cds: set pci1_hose.config_table after fsl_setup_hose
  powerpc/mpc8568mds: set pci1_hose.config_table after fsl_setup_hose

13 years agoCM4000: fix broken flash base for OpenGear boards
Greg Ungerer [Fri, 9 Sep 2011 12:23:34 +0000 (22:23 +1000)]
CM4000: fix broken flash base for OpenGear boards

Use _bss_start_ofs as the size of the boot loader code+data that we want
to protect in the flash. This replaces use of the no longer defined
_armboot_start.

Fixes:

flash.c: In function ‘flash_init’:
flash.c:75: error: ‘_bss_start’ undeclared (first use in this function)
flash.c:75: error: (Each undeclared identifier is reported only once
flash.c:75: error: for each function it appears in.)
flash.c:75: error: ‘_armboot_start’ undeclared (first use in this function)

Signed-off-by: <greg.ungerer@opengear.com>
13 years agoCM4000: fix missing RAM definitions for OpenGear boards
Greg Ungerer [Fri, 9 Sep 2011 12:23:18 +0000 (22:23 +1000)]
CM4000: fix missing RAM definitions for OpenGear boards

The OpenGear boards CM4008, CM4116 and CM4148 need their DRAM base
and RAM stack base addresses defined.

Fixes:

board.c: In function ‘__dram_init_banksize’:
board.c:227: error: ‘CONFIG_SYS_SDRAM_BASE’ undeclared (first use in this function)
board.c:227: error: (Each undeclared identifier is reported only once
board.c:227: error: for each function it appears in.)
board.c: In function ‘board_init_f’:
board.c:270: error: ‘CONFIG_SYS_INIT_SP_ADDR’ undeclared (first use in this function)
board.c:303: error: ‘CONFIG_SYS_SDRAM_BASE’ undeclared (first use in this function)

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
13 years agoKS8695: move TIMER_ definitions before code use
Greg Ungerer [Fri, 9 Sep 2011 12:19:10 +0000 (22:19 +1000)]
KS8695: move TIMER_ definitions before code use

Move the TIMER_ definitions before they are used in KS8695 timer.c code.
Fixes:

timer.c: In function ‘timer_init’:
timer.c:37: error: ‘TIMER_COUNT’ undeclared (first use in this function)
timer.c:37: error: (Each undeclared identifier is reported only once
timer.c:37: error: for each function it appears in.)
timer.c:38: error: ‘TIMER_PULSE’ undeclared (first use in this function)

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
13 years agophylib: remove a couple of redundant code lines
Vladimir Zapolskiy [Mon, 5 Sep 2011 07:24:08 +0000 (07:24 +0000)]
phylib: remove a couple of redundant code lines

This change slightly improves readability of the phydev speed/duplex
assignment logic.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Detlev Zundel <dzu@denx.de>
13 years agophylib: reset mii bus only if reset handler is registered
Vladimir Zapolskiy [Mon, 5 Sep 2011 07:24:07 +0000 (07:24 +0000)]
phylib: reset mii bus only if reset handler is registered

This change allows to cope with a mii bus device registered using
miiphy_register(), which doesn't assign a default reset handler.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Detlev Zundel <dzu@denx.de>
13 years agoUBIFS: Change ubifsload to set the filesize variable
Bastian Ruppert [Mon, 5 Sep 2011 03:03:57 +0000 (03:03 +0000)]
UBIFS: Change ubifsload to set the filesize variable

This is the same behaviour like tftp or fatload command.

Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
CC: kmpark@infradead.org
Acked-by: Detlev Zundel <dzu@denx.de>
13 years agoAdd assert() for debug assertions
Simon Glass [Wed, 29 Jun 2011 09:49:34 +0000 (09:49 +0000)]
Add assert() for debug assertions

assert() is like BUG_ON() but compiles to nothing unless DEBUG is defined.
This is useful when a condition is an error but a board reset is unlikely
to fix it, so it is better to soldier on in hope. Assertion failures should
be caught during development/test.

It turns out that assert() is defined separately in a few places in U-Boot
with various meanings. This patch cleans up some of these.

Build errors exposed by this change (and defining DEBUG) are also fixed in
this patch.

Signed-off-by: Simon Glass <sjg@chromium.org>
13 years agoMAKEALL: drop boards listed in boards.cfg
Wolfgang Denk [Thu, 8 Sep 2011 05:01:24 +0000 (05:01 +0000)]
MAKEALL: drop boards listed in boards.cfg

Pick them up automatically using $(boards_by_arch ...)

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agoMAKEALL: drop non-existent "versatile" configuration
Wolfgang Denk [Thu, 8 Sep 2011 03:23:28 +0000 (03:23 +0000)]
MAKEALL: drop non-existent "versatile" configuration

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
13 years agoYAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:22 +0000 (02:10 +0000)]
YAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings

Fix these:
yaffs_guts.c: In function 'yaffs_ReadDataFromFile':
yaffs_guts.c:4622: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c:4622: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c: In function 'yaffs_WriteDataToFile':
yaffs_guts.c:4745: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c:4745: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c: In function 'yaffs_ResizeFile':
yaffs_guts.c:4968: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c:4968: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c: In function 'yaffs_GutsInitialise':
yaffs_guts.c:7235: warning: assignment from incompatible pointer type
yaffs_guts.c: In function 'yaffs_CreateNewObject':
yaffs_guts.c:2143: warning: 'tn' may be used uninitialized in this function
yaffs_guts.c: In function 'yaffs_MknodObject':
yaffs_guts.c:2258: warning: 'str' may be used uninitialized in this function

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agoYAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:21 +0000 (02:10 +0000)]
YAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings

Fix these:
yaffs_guts.c: At top level:
yaffs_guts.c:400: warning: 'yaffs_SkipFullVerification' defined but not used

Testing shows no changes of the image sizes.

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agoYAFFS2: fs/yaffs2/yaffs_nand.[hc] - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:20 +0000 (02:10 +0000)]
YAFFS2: fs/yaffs2/yaffs_nand.[hc] - fix build warnings

Fix these:
yaffs_guts.c: In function 'yaffs_Scan':
yaffs_guts.c:5436: warning: pointer targets in passing argument 4 of 'yaffs_QueryInitialBlockState' differ in signedness
yaffs_guts.c: In function 'yaffs_ScanBackwards':
yaffs_guts.c:6017: warning: pointer targets in passing argument 4 of 'yaffs_QueryInitialBlockState' differ in signedness
yaffs_nand.c: In function 'yaffs_QueryInitialBlockState':
yaffs_nand.c:109: warning: pointer targets in passing argument 4 of 'dev->queryNANDBlock' differ in signedness
yaffs_nand.c:113: warning: pointer targets in passing argument 4 of 'yaffs_TagsCompatabilityQueryNANDBlock' differ in signedness

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agoYAFFS2: fs/yaffs2/Makefile - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:19 +0000 (02:10 +0000)]
YAFFS2: fs/yaffs2/Makefile - fix build warnings

Drop the "-DNO_Y_INLINE" setting to fix these:
yaffs_guts.h:806: warning: 'yaffs_GetBlockInfo' defined but not used

Impact on image size is negligible - for the VCMA9 board the text
segment size grew from 496353 to 496357 bytes (i. e. 0.0008%);
total image size even remained constant.

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agoYAFFS2: fs/yaffs2/yaffscfg.c - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:18 +0000 (02:10 +0000)]
YAFFS2: fs/yaffs2/yaffscfg.c - fix build warnings

Fix these:
yaffscfg.c: In function 'cmd_yaffs_mread_file':
yaffscfg.c:316: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'char *'
yaffscfg.c: In function 'cmd_yaffs_ls': yaffscfg.c:371: warning: format '%7d' expects type 'int', but argument 3 has type 'off_t'

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agoYAFFS2: cmd_yaffs2.c - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:17 +0000 (02:10 +0000)]
YAFFS2: cmd_yaffs2.c - fix build warnings

Fix these:
cmd_yaffs2.c: In function 'do_ywr':
cmd_yaffs2.c:69: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'ulong'
cmd_yaffs2.c:69: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'ulong'

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agonet/eth.c: throw BUG for eth_get_dev_by_name(NULL)
Helmut Raiger [Mon, 22 Aug 2011 00:17:17 +0000 (00:17 +0000)]
net/eth.c: throw BUG for eth_get_dev_by_name(NULL)

eth_get_dev_by_name() is not safe to use for devname being NULL
as it uses strcmp. This patch makes it fail with a BUG().

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Mike Frysinger <vapier@gentoo.org>
13 years agosmc911x: Fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 01:04:27 +0000 (01:04 +0000)]
smc911x: Fix build warnings

Commit 6af1d41 "smc911x MII made available" was missing a few "const"
qualifiers.  Fix the resulting in build warnings:

smc911x.c: In function 'smc911x_initialize':
smc911x.c:297: warning: passing argument 2 of 'miiphy_register' from incompatible pointer type
smc911x.c:297: warning: passing argument 3 of 'miiphy_register' from incompatible pointer type

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Helmut Raiger <helmut.raiger@hale.at>
13 years agopowerpc/mpc8610hpcd: set pci1_hose.config_table after fsl_setup_hose
Zhao Chenhui [Wed, 24 Aug 2011 05:20:06 +0000 (13:20 +0800)]
powerpc/mpc8610hpcd: set pci1_hose.config_table after fsl_setup_hose

The function fsl_setup_hose clears the variable pci1_hose.
Set pci1_hose.config_table after it.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13 years agopowerpc/mpc8548cds: set pci1_hose.config_table after fsl_setup_hose
Zhao Chenhui [Wed, 24 Aug 2011 05:20:04 +0000 (13:20 +0800)]
powerpc/mpc8548cds: set pci1_hose.config_table after fsl_setup_hose

The function fsl_setup_hose clears the variable pci1_hose.
Set pci1_hose.config_table after it.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13 years agopowerpc/mpc8568mds: set pci1_hose.config_table after fsl_setup_hose
Zhao Chenhui [Wed, 24 Aug 2011 05:20:05 +0000 (13:20 +0800)]
powerpc/mpc8568mds: set pci1_hose.config_table after fsl_setup_hose

The function fsl_setup_hose clears the variable pci1_hose.
Set pci1_hose.config_table after it.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13 years agoMX31: mx31pdk: make use of GPIO framework
Stefano Babic [Wed, 7 Sep 2011 10:51:43 +0000 (10:51 +0000)]
MX31: mx31pdk: make use of GPIO framework

Signed-off-by: Stefano Babic <sbabic@denx.de>
13 years agoPXA: FIX: Deep-sleep return address in stored in PSPR
Marek Vasut [Wed, 7 Sep 2011 03:25:45 +0000 (03:25 +0000)]
PXA: FIX: Deep-sleep return address in stored in PSPR

FIX for a typo-bug: The address is stored in PSPR, not PSSR.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
13 years agosmc911x MII made available
Helmut Raiger [Wed, 29 Jun 2011 00:12:14 +0000 (00:12 +0000)]
smc911x MII made available

The driver already had the MII functions, but they have not been
registered using miiphy_register().

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
13 years agocommon: fix behavior of ROUND macro when input is already rounded
Anton Staaf [Fri, 2 Sep 2011 13:45:28 +0000 (13:45 +0000)]
common: fix behavior of ROUND macro when input is already rounded

Currently when you call ROUND with a value that is already a
multiple of the second parameter it will return a value that is
one multiple larger, instead of returning the value passed in.

There are only two types of usage of ROUND currently, one in
various config files to round CONFIG_SYS_MALLOC_LEN to a multiple
of 4096 bytes.  The other in cmd_sf.c where the incorrect behavior
of ROUND is worked around be subtracting one from the length argument
before passing it to ROUND.

This patch fixes ROUND and removes the workaround from cmd_sf.  It
also results in all of the malloc pools that use ROUND to compute
their size shrinking by 4KB.

Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Mike Frysinger <vapier@gentoo.org>
13 years agoMerge branch 'master' of git://git.denx.de/u-boot-mmc
Wolfgang Denk [Wed, 7 Sep 2011 20:22:38 +0000 (22:22 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mmc

* 'master' of git://git.denx.de/u-boot-mmc:
  ftsdc010: add support of ftsdc010 mmc controller
  mmc: Fix mmc_send_status()

13 years agoMerge branch 'master' of git://git.denx.de/u-boot-video
Wolfgang Denk [Wed, 7 Sep 2011 20:20:38 +0000 (22:20 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-video

* 'master' of git://git.denx.de/u-boot-video:
  VIDEO: mb86r0xgdc.c: fix warning: unused variable 'i'

13 years agoI2C: mxc: fix compilation for MX31
Stefano Babic [Tue, 30 Aug 2011 00:51:14 +0000 (00:51 +0000)]
I2C: mxc: fix compilation for MX31

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
13 years agoMX31: fix missing mxc_get_clk() call
Stefano Babic [Tue, 30 Aug 2011 00:51:13 +0000 (00:51 +0000)]
MX31: fix missing mxc_get_clk() call

Add missing case to be used in common MXC code.

Signed-off-by: Stefano Babic <sbabic@denx.de>
13 years agoarm: tegra2: fix out-of-tree build
Che-liang Chiou [Tue, 23 Aug 2011 00:03:12 +0000 (00:03 +0000)]
arm: tegra2: fix out-of-tree build

The out-of-tree build fails because the Makefiles in question depend on
source files of another directory but do not explicitly mkdir that
directory.

As a matter of fact, other Makefiles under board/*/ directory that refer
to source files under another directory explicitly call mkdir.

This patch adds explicit mkdir's to the Makefiles in question, and
verifies that out-of-tree build is working.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
13 years agoomap24xx: fix 'reset_timer_masked' declaration error
Wolfgang Denk [Mon, 5 Sep 2011 05:55:59 +0000 (05:55 +0000)]
omap24xx: fix 'reset_timer_masked' declaration error

Commit 17659d7 "Timer: Remove reset_timer_masked()" introduced a
static declaration for reset_timer_masked() which causes build errors:

timer.c:45: error: static declaration of 'reset_timer_masked' follows non-static declaration
include/asm/u-boot-arm.h:70: error: previous declaration of 'reset_timer_masked' was here

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Graeme Russ <graeme.russ@gmail.com>
Cc: Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
13 years agoda8xxevm: Fix warning: unused variable 'val'
Wolfgang Denk [Mon, 5 Sep 2011 05:26:27 +0000 (05:26 +0000)]
da8xxevm: Fix warning: unused variable 'val'

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
13 years agoARM: PXA: remove broken "zylonite" board.
Wolfgang Denk [Mon, 5 Sep 2011 10:00:30 +0000 (10:00 +0000)]
ARM: PXA: remove broken "zylonite" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
13 years agoARM: remove broken "shannon" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:34 +0000 (14:37 +0200)]
ARM: remove broken "shannon" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Rolf Offermanns <rof@sysgo.de>
13 years agoARM: remove broken "modnet50" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:33 +0000 (14:37 +0200)]
ARM: remove broken "modnet50" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Thomas Elste <info@elste.org>
13 years agoARM: remove broken "lpc2292sodimm" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:32 +0000 (14:37 +0200)]
ARM: remove broken "lpc2292sodimm" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
13 years agoARM: remove broken "lart" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:31 +0000 (14:37 +0200)]
ARM: remove broken "lart" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Alex Züpke <azu@sysgo.de>
13 years agoARM: remove broken "impa7" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:30 +0000 (14:37 +0200)]
ARM: remove broken "impa7" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Marius Gröger <mag@sysgo.de>
13 years agoARM: remove broken "gcplus" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:29 +0000 (14:37 +0200)]
ARM: remove broken "gcplus" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: George G. Davis <gdavis@mvista.com>
13 years agoARM: remove broken "evb4510" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:28 +0000 (14:37 +0200)]
ARM: remove broken "evb4510" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Curt Brune <curt@cucy.com>
13 years agoARM: remove broken "ep7312" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:27 +0000 (14:37 +0200)]
ARM: remove broken "ep7312" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Marius Gröger <mag@sysgo.de>
13 years agoARM: remove broken "dnp1110" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:26 +0000 (14:37 +0200)]
ARM: remove broken "dnp1110" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Alex Züpke <azu@sysgo.de>
13 years agoARM: remove broken "SMN42" board.
Wolfgang Denk [Mon, 5 Sep 2011 02:37:25 +0000 (02:37 +0000)]
ARM: remove broken "SMN42" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
13 years agodoc/README.scrapyard: Update commit IDs or board removals
Wolfgang Denk [Mon, 5 Sep 2011 12:33:34 +0000 (14:33 +0200)]
doc/README.scrapyard: Update commit IDs or board removals

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agoMakefile : fix generation of cpu related asm-offsets.h
Stefano Babic [Mon, 5 Sep 2011 04:32:28 +0000 (04:32 +0000)]
Makefile : fix generation of cpu related asm-offsets.h

commit 0edf8b5b2fa0d210ebc4d6da0fd1aceeb7e44e47 breaks
building on a different directory with the O= parameter.
The patch wil fix this issue, generating always asm-offsets.h before
the other targets.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Wolfgang Denk <wd@denx.de>
13 years agoVIDEO: mb86r0xgdc.c: fix warning: unused variable 'i'
Wolfgang Denk [Mon, 5 Sep 2011 19:51:33 +0000 (21:51 +0200)]
VIDEO: mb86r0xgdc.c: fix warning: unused variable 'i'

Fix build warning:

Configuring for jadecpu board...
mb86r0xgdc.c: In function 'dsp_init':
mb86r0xgdc.c:60: warning: unused variable 'i'

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
13 years agoFlush cache after the OS image is loaded into the memory.
Diana CRACIUN [Wed, 31 Aug 2011 02:45:23 +0000 (02:45 +0000)]
Flush cache after the OS image is loaded into the memory.

Since we are loading an executable image into memory we need flush it
out of the cache to possible maintain coherence on CPUs with split
instruction and data caches.  We do this for other executable image
loading command.

On PowerPC once we do this we no longer need to explicitly flush the
dcache on multi-core systems in the BOOTM_STATE_OS_PREP phase.  We now
treat the BOOTM_STATE_OS_PREP as a no-op to maintain backwards
compatibility with the bootm subcommand.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Diana CRACIUN <Diana.Craciun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13 years agoCorrect call to eth_write_hwaddr()
Simon Glass [Tue, 30 Aug 2011 05:51:00 +0000 (05:51 +0000)]
Correct call to eth_write_hwaddr()

This fixes "Warning: failed to set MAC address" on platforms which rely on
an 'ethaddr' environment variable to set the MAC address.

This bug was introduced by this commit:

7616e785 Add Ethernet hardware MAC address framework to usbnet

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kumar Gala <galak@kernel.crashing.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Tested-by: Heiko Schocher <hs@denx.de>
13 years agosf: winbond: Add support for the Winbond W25X40
James Le Cuirot [Fri, 15 Jul 2011 06:12:51 +0000 (06:12 +0000)]
sf: winbond: Add support for the Winbond W25X40

The Winbond W25X40 is now being used in the IP02 (and possibly IP04).
Tested and working on the actual device.

13 years agoboard/prodrive/alpr/fpga.c: Coding style cleanup
Wolfgang Denk [Mon, 5 Sep 2011 10:52:21 +0000 (12:52 +0200)]
board/prodrive/alpr/fpga.c: Coding style cleanup

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
13 years agoPPC4xx: ALPR: constify FPGA code
Wolfgang Denk [Mon, 5 Sep 2011 09:39:04 +0000 (11:39 +0200)]
PPC4xx: ALPR: constify FPGA code

The ALPR custom FPGA code was missed by commit e6a857d "fpga:
constify to fix build warning" resulting in such warnings:

fpga.c:226: warning: initialization from incompatible pointer type

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
13 years agoFPGA: constify Lattice FPGA code
Wolfgang Denk [Fri, 5 Aug 2011 02:26:31 +0000 (02:26 +0000)]
FPGA: constify Lattice FPGA code

The Lattice code was missed by commit e6a857d "fpga: constify to fix
build warning" resulting in such warnings:

fpga.c: In function 'fpga_load':
fpga.c:238: warning: passing argument 2 of 'lattice_load' discards qualifiers from pointer target type
fpga.c: In function 'fpga_dump':
fpga.c:278: warning: passing argument 2 of 'lattice_dump' discards qualifiers from pointer target type

Signed-off-by: Wolfgang Denk <wd@denx.de>
cc: Stefano Babic <sbabic@denx.de>

13 years agoMPC8xx: fix build problem for ETX094 board
Wolfgang Denk [Sun, 4 Sep 2011 21:51:32 +0000 (21:51 +0000)]
MPC8xx: fix build problem for ETX094 board

Commit 58c583b "net: Check network device driver name" increased the
code size and broke building for the ETX094 board.

Adjust the linker script to make it build again.

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agolinkstation: fix warning: "CONFIG_IDENT_STRING" redefined
Wolfgang Denk [Sun, 31 Jul 2011 00:35:13 +0000 (00:35 +0000)]
linkstation: fix warning: "CONFIG_IDENT_STRING" redefined

Commit 09c2e90 "unify version_string" defines a default value for
CONFIG_IDENT_STRING in version.h, so any private settings musty be
done before including this file.  Move the include for version.h after
the one for common.h to fix the build problem.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
13 years agodrivers/video/Makefile: include object files only once
Wolfgang Denk [Mon, 5 Sep 2011 07:19:08 +0000 (09:19 +0200)]
drivers/video/Makefile: include object files only once

Use "$(sort $(COBJS-y))" to prevent multiple inclusion of the same
object files.

Also sort driver list.

Signed-off-by: Wolfgang Denk <wd@denx.de>
13 years agovideo: Fix build error with global inclusion of videomodes
Kumar Gala [Sun, 4 Sep 2011 12:48:34 +0000 (12:48 +0000)]
video: Fix build error with global inclusion of videomodes

The following commit:

commit de701d118380de12a48c8a4fb345e9f909329432
Author: Syed Mohammed Khasim <khasim@ti.com>
Date:   Tue Apr 19 14:00:34 2011 -0500

   OMAP3: Add DSS driver for OMAP3

Added videomodes to the object list w/o any protection.  This causes
build issues like:

videomodes.o:(.rodata.res_mode_init+0x0): multiple definition of `res_mode_init'
videomodes.o:(.rodata.res_mode_init+0x0): first defined here
videomodes.o: In function `video_get_params':
/local/home/galak/git/u-boot/drivers/video/videomodes.c:160: multiple definition of `video_get_params'
videomodes.o:/local/home/galak/git/u-boot/drivers/video/videomodes.c:160: first defined here
videomodes.o: In function `video_get_video_mode':
/local/home/galak/git/u-boot/drivers/video/videomodes.c:229: multiple definition of `video_get_video_mode'
videomodes.o:/local/home/galak/git/u-boot/drivers/video/videomodes.c:229: first defined here
videomodes.o:(.rodata.vesa_modes+0x0): multiple definition of `vesa_modes'
videomodes.o:(.rodata.vesa_modes+0x0): first defined here
make[1]: *** [libvideo.o] Error 1

Remove the unconditional inclusion and move to adding to
CONFIG_VIDEO_OMAP3 case.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13 years agoftsdc010: add support of ftsdc010 mmc controller
Macpaul Lin [Wed, 20 Jul 2011 21:29:58 +0000 (21:29 +0000)]
ftsdc010: add support of ftsdc010 mmc controller

Faraday FTSDC010 controller is a SD/MMC controller for SoC chip.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
13 years agommc: Fix mmc_send_status()
Marek Vasut [Wed, 10 Aug 2011 07:24:48 +0000 (09:24 +0200)]
mmc: Fix mmc_send_status()

The mmc_send_status() function sets cmd.arg = 0. That's incorrect, so fix it.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Tested-by: Lei Wen <adrian.wenl@gmail.com>
13 years agonet: Check network device driver name
Michal Simek [Mon, 29 Aug 2011 23:30:13 +0000 (23:30 +0000)]
net: Check network device driver name

If name is longer than allocated space NAMESIZE
mac address is rewritten which show error
message like:

Error message:
Warning: Xlltemac.87000000 MAC addresses don't match:
Address in SROM is         30:00:00:00:00:00
Address in environment is  00:0a:35:00:6a:04

NAMESIZE contains Driver name + zero terminated character.

Signed-off-by: Michal Simek <monstr@monstr.eu>
13 years agostdio: Fix a possible buffer overflow
Bradley Bolen [Mon, 22 Aug 2011 11:48:05 +0000 (11:48 +0000)]
stdio: Fix a possible buffer overflow

Signed-off-by: Bradley Bolen <bradleybolen at yahoo.com>
13 years agoMAINTAINERS: fix integrator and versatile
Linus Walleij [Thu, 28 Jul 2011 12:54:14 +0000 (12:54 +0000)]
MAINTAINERS: fix integrator and versatile

- Take maintainership of the integratorcp board
- Remove the double entry for the versatile board
  it has two variants but only one board folder

Cc: Philippe Robin <philippe.robin@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
13 years agoMerge branch 'master' of git://git.denx.de/u-boot-coldfire
Wolfgang Denk [Sun, 4 Sep 2011 20:53:04 +0000 (22:53 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-coldfire

* 'master' of git://git.denx.de/u-boot-coldfire:
  ColdFire:Clean up the CONFIG_STANDALONE_LOAD_ADDR usage
  ColdFire:Add mb for 5253 dram initialization
  ColdFire:Define the DM9000 byteswap for M5253 board.
  ColdFire:Update the env settings for several boards.
  ColdFire:disable the NFS define for 52277 board.
  ColdFire:Update the timer_init since it was unified.
  ColdFire: Cleanup for partial linking and --gc-sections
  ColdFire: Update compile flags for each CPUs
  ColdFire:Fix the configuration broken for some boards.

13 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Sun, 4 Sep 2011 19:12:18 +0000 (21:12 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (145 commits)
  beagleboard: enable HUB power on all variants of the BeagleBoard
  dm3730: enable dpll5
  ehci-hcd: Allow cleanups to happen gracefully on a timeout.
  OMAP3: Add DSS driver for OMAP3
  led: Remove state-saving of led for toggle functionality and add toggle option to led command
  led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all'
  led: correct off/on locations in structure
  led: added cmd_led to Makefile
  BeagleBoard: fix LED 0/1 in driver
  Corrected LED name match finding avoiding extraneous Usage printouts
  BeagleBoard: config: updated default configuration
  BeagleBoard: config: Enabled multibus support for I2C in configuration
  BeagleBoard: config: add optargs/buddy/camera
  BeagleBoard: config: increase command-line functionality
  BeagleBoard: config: make mtest run
  BeagleBoard: config: enable DSS
  BeagleBoard: config: enable asix driver and dhcp
  BeagleBoard: config: enable networking
  BeagleBoard: config: decrease bootdelay to 2 seconds
  BeagleBoard: config: use uImage.beagle for tftp
  BeagleBoard: config: hardcode MAC for onboard SMSC
  BeagleBoard: config: load kernel from MMC ext, not FAT
  BeagleBoard: Configure DVI/S-video
  BeagleBoard: Added userbutton command
  BeagleBoard: turn off clocks in ehci_stop
  USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
  beagleboard: add support for xM revision C
  beagle: pass expansionboard name in bootargs
  OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
  OMAP3 Beagle Pin Mux initialization glitch fix
  da850: modifications for Logic PD Rev.3 AM18xx EVM
  da850: fix the channel number for EMAC teardown init
  da850: add support for Spectrum Digital AM18xx EVM
  da850: add support to wake up DSP during board init
  da850: modify the U-Boot prompt string
  da850: add NOR boot mode support
  da8xx: add support for multiple PLL controllers
  da850: indicate cache usage disable in config file
  dm365: modify boot prompt from dm365 to dm36x
  dm365: disable cache usage due to coherency issues
  dm6446: disable cache usage due to coherency issues
  OMAP3: Remove legacy mmc driver
  devkit8000: Use generic MMC driver
  TI OMAP3 SDP3430: Use generic MMC driver
  AM3517 CraneBoard: Use generic MMC driver
  OMAP3: pandora: Use generic MMC driver
  OMAP3: Zoom2: Use generic MMC driver
  OMAP3: Zoom1: Use generic MMC driver
  OMAP3: DIG297: Use generic MMC driver
  OMAP3: CM-T35: Use generic MMC driver
  am3517evm: Use generic MMC driver
  omap3evm: Use generic MMC driver
  omap3:clock: check cpu_family before enabling clks for IVA & CAM
  omap3:clock: configure GFX clock to 200MHz for AM/DM37x
  OMAP3/4: Increase console I/O buffer size
  PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE
  PXA: Fix CSB226, fix monitor length
  PXA: Fix Lubbock, remove redundant parenthesis
  armv7: cache: remove flush on un-aligned invalidate
  armv7: stronger barrier for cache-maintenance operations
  omap: enable caches at system start-up
  arm: do not force d-cache enable on all boards
  ORIGEN: Add MMC SPL support
  ARMV7: Add support for Samsung ORIGEN board
  i2c:gpio:s5p: Enable I2C GPIO on the GONI target
  i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)
  Tegra2: Use clock and pinmux functions to simplify code
  Tegra2: Add additional pin multiplexing features
  Tegra2: Add more clock support
  Tegra2: Add microsecond timer function
  ARM: remove broken "at91rm9200dk" board
  ARM: remove broken "m501sk" board
  ARM: remove broken "kb9202" board
  ARM: remove broken "csb637" board
  ARM: remove broken "cmc_pu2" board
  ARM: remove broken "at91cap9adk" board
  ARM: remove broken "voiceblue" board
  ARM: remove broken "smdk2400" board
  ARM: remove broken "sbc2410x" board
  ARM: remove broken "netstar" board
  ARM: remove broken "mx1fs2" board
  ARM: remove broken "lpd7a40x" boards
  ARM: remove broken "edb93xx" boards
  ARM: remove broken "B2" board
  ARM: remove broken "armadillo" board
  ARM: remove broken "assabet" board
  ARM: versatile: drop warnings
  IMX: scb9328: drop warnings
  MX31: imx31_litekit: make use of GPIO framework
  MX31: mx31ads: make use of GPIO framework
  MX5: mx51evk: make use of GPIO framework
  MX35: mx35pdk: make use of GPIO framework
  MX5: mx53loco: make use of GPIO framework
  MX5: mx53evk: make use of GPIO framework
  MX5: vision2: make use of GPIO framework
  MX5: mx53smd: make use of GPIO framework
  MX5: mx53ard: make use of GPIO framework
  MX25: zmx25: make use of GPIO framework
  MX5: efikamx: make use of GPIO framework
  MX31: QONG: make use of GPIO framework
  MX35: make use of GPIO framework for MX35 processor
  MX5: make use of GPIO framework for MX5 processor
  MX31: make use of GPIO framework for MX31 processor
  MX25: make use of GPIO framework for MX25 processor
  IMX: uniform GPIO interface using GPIO framework
  MX: MX35 / MX5: uniform clock command with powerpc
  MX35: MX35PDK: support additional RAM on CSD1
  mx53: ddr3: Update DD3 initialization
  ARM: MX51: PLL errata workaround
  ARM: versatilepb : drop warnings due to double definitions
  omap4: increase SRAM budget to fix build error
  omap4: fix build warning due to signed unsigned comparison
  mkimage: Fix 'Unknown OMAP image type - 5'
  omap: fix gpio related build breaks
  gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
  SMDKV310: MMC SPL: Remove unwanted dummy functions
  SMDKV310: Fix undefined reference error
  SMDKV310: Fix build error for smdkv310 board
  gpio:samsung s5p_ suffix add for GPIO functions
  mmc: S5P: Support DMA restarts at buffer boundaries
  SMDKV310: Fix host compilation of mkv310_image
  arm: fix bd pointer dereference prior initialization
  arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
  mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
  MX31: removed warnings due to clock.h
  integrator: convert to new build system
  integratorcp: make the board compile
  integratorap: remove hardcoded 32MB memory cmdline
  ...

13 years agoColdFire:Clean up the CONFIG_STANDALONE_LOAD_ADDR usage
Jason Jin [Mon, 22 Aug 2011 08:26:50 +0000 (16:26 +0800)]
ColdFire:Clean up the CONFIG_STANDALONE_LOAD_ADDR usage

Remove the additional linker options for CONFIG_STANDALONE_LOAD_ADDR

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13 years agoColdFire:Add mb for 5253 dram initialization
Jason Jin [Mon, 18 Apr 2011 09:54:04 +0000 (17:54 +0800)]
ColdFire:Add mb for 5253 dram initialization

The dram initialization sequence should be in order.
This patch add mb for the dram intialization code to make
sure the compiler do not disorder the code.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13 years agoColdFire:Define the DM9000 byteswap for M5253 board.
Jason Jin [Fri, 19 Aug 2011 02:18:15 +0000 (10:18 +0800)]
ColdFire:Define the DM9000 byteswap for M5253 board.

The M5253DEMO board swapped the io pins which make
the standard IO function did not work for dm9000.
Define the byte swap to use raw io for dm9000.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13 years agoColdFire:Update the env settings for several boards.
Jason Jin [Fri, 19 Aug 2011 02:10:40 +0000 (10:10 +0800)]
ColdFire:Update the env settings for several boards.

Move the environment outside the u-boot for some boards
and enlarge the u-boot size in some env settings.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>