review.tizen.org Git - platform/kernel/linux-starfive.git/log

net: encx24j600: Fix invalid logic in reading of MISTAT register

A loop for reading MISTAT register continues while regmap_read() fails
and (mistat & BUSY), but if regmap_read() fails a value of mistat is
undefined.

The patch proposes to check for BUSY flag only when regmap_read()
succeed. Compile test only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: d70e53262f5c ("net: Microchip encx24j600 driver")
Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: encx24j600: Add parentheses to fix precedence

In functions regmap_encx24j600_phy_reg_read() and
regmap_encx24j600_phy_reg_write() in the conditions of the waiting
cycles for filling the variable 'ret' it is necessary to add parentheses
to prevent wrong assignment due to logical operations precedence.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: d70e53262f5c ("net: Microchip encx24j600 driver")
Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: correct desc type when header dma len is 4096

When there's only one buffer to dma and its length is 4096, then
only one data descriptor is needed to carry it according to current
descriptor definition. So the descriptor type should be `simple`
instead of `gather`, the latter requires more than one descriptor,
otherwise it'll be dropped by application firmware.

Fixes: c10d12e3dce8 ("nfp: add support for NFDK data path")
Fixes: d9d950490a0a ("nfp: nfdk: implement xdp tx path for NFDK")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Richard Donkin <richard.donkin@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221202134646.311108-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: Use "grep -E" instead of "egrep"

The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.

  sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net`

Here are the steps to install the latest grep:

  wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
  tar xf grep-3.8.tar.gz
  cd grep-3.8 && ./configure && make
  sudo make install
  export PATH=/usr/local/bin:$PATH

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: rtnetlink: correct xfrm policy rule in kci_test_ipsec_offload

When testing in kci_test_ipsec_offload, srcip is configured as $dstip,
it should add xfrm policy rule in instead of out.
The test result of this patch is as follows:
PASS: ipsec_offload

Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221201082246.14131-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tls: Fix tls selftests dependency to correct algorithm

Commit d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory") moves
SM3 and SM4 algorithm implementations from stand-alone library to crypto
API. The corresponding configuration options for the API version (generic)
are CONFIG_CRYPTO_SM3_GENERIC and CONFIG_CRYPTO_SM4_GENERIC, respectively.

Replace option selected in selftests configuration from the library version
to the API version.

Fixes: d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221201131852.38501-1-tianjia.zhang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: sja1105: Check return value

Return NULL if we got unexpected value from skb_trim_rcsum() in
sja1110_rcv_inband_control_extension()

Fixes: 4913b8ebf8a9 ("net: dsa: add support for the SJA1110 native tagging protocol")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221201140032.26746-3-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: hellcreek: Check return value

Return NULL if we got unexpected value from skb_trim_rcsum()
in hellcreek_rcv()

Fixes: 01ef09caad66 ("net: dsa: Add tag handling for Hirschmann Hellcreek switches")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20221201140032.26746-2-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: ksz: Check return value

Return NULL if we got unexpected value from skb_trim_rcsum()
in ksz_common_rcv()

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: bafe9ba7d908 ("net: dsa: ksz: Factor out common tag code")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221201140032.26746-1-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-2022-12-02' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- Fix regressions with CSR controller clones
- Fix support for Read Local Supported Codecs V2
- Fix overflow on L2CAP code
- Fix missing hci_dev_put on ISO and L2CAP code

* tag 'for-net-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: Fix crash when replugging CSR fake controllers
  Bluetooth: Fix not cleanup led when bt_init fails
  Bluetooth: Fix support for Read Local Supported Codecs V2
  Bluetooth: Remove codec id field in vendor codec definition
  Bluetooth: L2CAP: Fix u8 overflow
  Bluetooth: silence a dmesg error message in hci_request.c
  Bluetooth: hci_conn: add missing hci_dev_put() in iso_listen_bis()
  Bluetooth: 6LoWPAN: add missing hci_dev_put() in get_l2cap_conn()
  Bluetooth: btusb: Add debug message for CSR controllers
  Bluetooth: btusb: Fix CSR clones again by re-adding ERR_DATA_REPORTING quirk
====================

Link: https://lore.kernel.org/r/20221202213726.2801581-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: Fix crash when replugging CSR fake controllers

It seems fake CSR 5.0 clones can cause the suspend notifier to be
registered twice causing the following kernel panic:

[   71.986122] Call Trace:
[   71.986124]  <TASK>
[   71.986125]  blocking_notifier_chain_register+0x33/0x60
[   71.986130]  hci_register_dev+0x316/0x3d0 [bluetooth 99b5497ea3d09708fa1366c1dc03288bf3cca8da]
[   71.986154]  btusb_probe+0x979/0xd85 [btusb e1e0605a4f4c01984a4b9c8ac58c3666ae287477]
[   71.986159]  ? __pm_runtime_set_status+0x1a9/0x300
[   71.986162]  ? ktime_get_mono_fast_ns+0x3e/0x90
[   71.986167]  usb_probe_interface+0xe3/0x2b0
[   71.986171]  really_probe+0xdb/0x380
[   71.986174]  ? pm_runtime_barrier+0x54/0x90
[   71.986177]  __driver_probe_device+0x78/0x170
[   71.986180]  driver_probe_device+0x1f/0x90
[   71.986183]  __device_attach_driver+0x89/0x110
[   71.986186]  ? driver_allows_async_probing+0x70/0x70
[   71.986189]  bus_for_each_drv+0x8c/0xe0
[   71.986192]  __device_attach+0xb2/0x1e0
[   71.986195]  bus_probe_device+0x92/0xb0
[   71.986198]  device_add+0x422/0x9a0
[   71.986201]  ? sysfs_merge_group+0xd4/0x110
[   71.986205]  usb_set_configuration+0x57a/0x820
[   71.986208]  usb_generic_driver_probe+0x4f/0x70
[   71.986211]  usb_probe_device+0x3a/0x110
[   71.986213]  really_probe+0xdb/0x380
[   71.986216]  ? pm_runtime_barrier+0x54/0x90
[   71.986219]  __driver_probe_device+0x78/0x170
[   71.986221]  driver_probe_device+0x1f/0x90
[   71.986224]  __device_attach_driver+0x89/0x110
[   71.986227]  ? driver_allows_async_probing+0x70/0x70
[   71.986230]  bus_for_each_drv+0x8c/0xe0
[   71.986232]  __device_attach+0xb2/0x1e0
[   71.986235]  bus_probe_device+0x92/0xb0
[   71.986237]  device_add+0x422/0x9a0
[   71.986239]  ? _dev_info+0x7d/0x98
[   71.986242]  ? blake2s_update+0x4c/0xc0
[   71.986246]  usb_new_device.cold+0x148/0x36d
[   71.986250]  hub_event+0xa8a/0x1910
[   71.986255]  process_one_work+0x1c4/0x380
[   71.986259]  worker_thread+0x51/0x390
[   71.986262]  ? rescuer_thread+0x3b0/0x3b0
[   71.986264]  kthread+0xdb/0x110
[   71.986266]  ? kthread_complete_and_exit+0x20/0x20
[   71.986268]  ret_from_fork+0x1f/0x30
[   71.986273]  </TASK>
[   71.986274] ---[ end trace 0000000000000000 ]---
[   71.986284] btusb: probe of 2-1.6:1.0 failed with error -17

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216683
Cc: stable@vger.kernel.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Leonardo Eugênio <lelgenio@disroot.org>

Bluetooth: Fix not cleanup led when bt_init fails

bt_init() calls bt_leds_init() to register led, but if it fails later,
bt_leds_cleanup() is not called to unregister it.

This can cause panic if the argument "bluetooth-power" in text is freed
and then another led_trigger_register() tries to access it:

BUG: unable to handle page fault for address: ffffffffc06d3bc0
RIP: 0010:strcmp+0xc/0x30
  Call Trace:
    <TASK>
    led_trigger_register+0x10d/0x4f0
    led_trigger_register_simple+0x7d/0x100
    bt_init+0x39/0xf7 [bluetooth]
    do_one_initcall+0xd0/0x4e0

Fixes: e64c97b53bc6 ("Bluetooth: Add combined LED trigger for controller power")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: Fix support for Read Local Supported Codecs V2

Handling of Read Local Supported Codecs was broken during the
HCI serialization design change patches.

Fixes: d0b137062b2d ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: Remove codec id field in vendor codec definition

As per the specfication vendor codec id is defined.
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 2127

Fixes: 9ae664028a9e ("Bluetooth: Add support for Read Local Supported Codecs V2")
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: L2CAP: Fix u8 overflow

By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases
multiple times and eventually it will wrap around the maximum number
(i.e., 255).
This patch prevents this by adding a boundary check with
L2CAP_MAX_CONF_RSP

Btmon log:
Bluetooth monitor ver 5.64
= Note: Linux version 6.1.0-rc2 (x86_64)                               0.264594
= Note: Bluetooth subsystem version 2.22                               0.264636
@ MGMT Open: btmon (privileged) version 1.22                  {0x0001} 0.272191
= New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0)          [hci0] 13.877604
@ RAW Open: 9496 (privileged) version 2.22                   {0x0002} 13.890741
= Open Index: 00:00:00:00:00:00                                [hci0] 13.900426
(...)
> ACL Data RX: Handle 200 flags 0x00 dlen 1033             #32 [hci0] 14.273106
        invalid packet size (12 != 1033)
        08 00 01 00 02 01 04 00 01 10 ff ff              ............
> ACL Data RX: Handle 200 flags 0x00 dlen 1547             #33 [hci0] 14.273561
        invalid packet size (14 != 1547)
        0a 00 01 00 04 01 06 00 40 00 00 00 00 00        ........@.....
> ACL Data RX: Handle 200 flags 0x00 dlen 2061             #34 [hci0] 14.274390
        invalid packet size (16 != 2061)
        0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04  ........@.......
> ACL Data RX: Handle 200 flags 0x00 dlen 2061             #35 [hci0] 14.274932
        invalid packet size (16 != 2061)
        0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00  ........@.......
= bluetoothd: Bluetooth daemon 5.43                                   14.401828
> ACL Data RX: Handle 200 flags 0x00 dlen 1033             #36 [hci0] 14.275753
        invalid packet size (12 != 1033)
        08 00 01 00 04 01 04 00 40 00 00 00              ........@...

Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: silence a dmesg error message in hci_request.c

On kernel 6.1-rcX, I have been getting the following dmesg error message
on every boot, resume from suspend and rfkill unblock of the Bluetooth
device:

Bluetooth: hci0: HCI_REQ-0xfcf0

After some investigation, it turned out to be caused by
commit dd50a864ffae ("Bluetooth: Delete unreferenced hci_request code")
which modified hci_req_add() in net/bluetooth/hci_request.c to always
print an error message when it is executed. In my case, the function was
executed by msft_set_filter_enable() in net/bluetooth/msft.c, which
provides support for Microsoft vendor opcodes.

As explained by Brian Gix, "the error gets logged because it is using a
deprecated (but still working) mechanism to issue HCI opcodes" [1]. So
this is just a debugging tool to show that a deprecated function is
executed. As such, it should not be included in the mainline kernel.
See for example
commit 771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely and for good")
Additionally, this error message is cryptic and the user is not able to
do anything about it.

[1]
Link: https://lore.kernel.org/lkml/beb8dcdc3aee4c5c833aa382f35995f17e7961a1.camel@intel.com/
Fixes: dd50a864ffae ("Bluetooth: Delete unreferenced hci_request code")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Brian Gix <brian.gix@intel.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_conn: add missing hci_dev_put() in iso_listen_bis()

hci_get_route() takes reference, we should use hci_dev_put() to release
it when not need anymore.

Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: 6LoWPAN: add missing hci_dev_put() in get_l2cap_conn()

hci_get_route() takes reference, we should use hci_dev_put() to release
it when not need anymore.

Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btusb: Add debug message for CSR controllers

The rationale of showing this is that it's potentially critical
information to diagnose and find more CSR compatibility bugs in the
future and it will save a lot of headaches.

Given that clones come from a wide array of vendors (some are actually
Barrot, some are something else) and these numbers are what let us find
differences between actual and fake ones, it will be immensely helpful
to scour the Internet looking for this pattern and building an actual
database to find correlations and improve the checks.

Cc: stable@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btusb: Fix CSR clones again by re-adding ERR_DATA_REPORTING quirk

A patch series by a Qualcomm engineer essentially removed my
quirk/workaround because they thought it was unnecessary.

It wasn't, and it broke everything again:

https://patchwork.kernel.org/project/netdevbpf/list/?series=661703&archive=both&state=*

He argues that the quirk is not necessary because the code should check
if the dongle says if it's supported or not. The problem is that for
these Chinese CSR clones they say that it would work:

= New Index: 00:00:00:00:00:00 (Primary,USB,hci0)
= Open Index: 00:00:00:00:00:00
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> HCI Event: Command Complete (0x0e) plen 12
> [hci0] 11.276039
      Read Local Version Information (0x04|0x0001) ncmd 1
        Status: Success (0x00)
        HCI version: Bluetooth 5.0 (0x09) - Revision 2064 (0x0810)
        LMP version: Bluetooth 5.0 (0x09) - Subversion 8978 (0x2312)
        Manufacturer: Cambridge Silicon Radio (10)
...
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 68
> [hci0] 11.668030
      Read Local Supported Commands (0x04|0x0002) ncmd 1
        Status: Success (0x00)
        Commands: 163 entries
          ...
          Read Default Erroneous Data Reporting (Octet 18 - Bit 2)
          Write Default Erroneous Data Reporting (Octet 18 - Bit 3)
          ...
...
< HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0
= Close Index: 00:1A:7D:DA:71:XX

So bring it back wholesale.

Fixes: 63b1a7dd38bf ("Bluetooth: hci_sync: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING")
Fixes: e168f6900877 ("Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for fake CSR")
Fixes: 766ae2422b43 ("Bluetooth: hci_sync: Check LMP feature bit instead of quirk")
Cc: stable@vger.kernel.org
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Merge branch 'vmxnet3-fixes'

Ronak Doshi says:

====================
vmxnet3: couple of fixes

This series fixes following issues:

Patch 1:
  This patch provides a fix to correctly report encapsulated LRO'ed
  packet.

Patch 2:
  This patch provides a fix to use correct intrConf reference.

Changes in v2:
- declare generic descriptor to be used
- remove white spaces
- remove single quote around commit reference in patch 2
- remove if check for encap_lro
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

vmxnet3: use correct intrConf reference when using extended queues

Commit 39f9895a00f4 ("vmxnet3: add support for 32 Tx/Rx queues")
added support for 32Tx/Rx queues. As a part of this patch, intrConf
structure was extended to incorporate increased queues.

This patch fixes the issue where incorrect reference is being used.

Fixes: 39f9895a00f4 ("vmxnet3: add support for 32 Tx/Rx queues")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vmxnet3: correctly report encapsulated LRO packet

Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, the
pathc did not report correctly the encapsulated packet which is
LRO'ed by the hypervisor.

This patch fixes this issue by using correct callback for the LRO'ed
encapsulated packet.

Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-11-30 (e1000e, igb)

This series contains updates to e1000e and igb drivers.

Akihiko Odaki fixes calculation for checking whether space for next
frame exists for e1000e and properly sets MSI-X vector to fix failing
ethtool interrupt test for igb.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Allocate MSI-X vector when testing
e1000e: Fix TX dispatch condition
====================

Link: https://lore.kernel.org/r/20221130194228.3257787-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

inet: ping: use hlist_nulls rcu iterator during lookup

ping_lookup() does not acquire the table spinlock, so iteration should
use hlist_nulls_for_each_entry_rcu().

Spotted during code review.

Fixes: dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20221129140644.28525-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'af_unix-fix-a-null-deref-in-sk_diag_dump_uid'

Kuniyuki Iwashima says:

====================
af_unix: Fix a NULL deref in sk_diag_dump_uid().

The first patch fixes a NULL deref when we dump a AF_UNIX socket's UID,
and the second patch adds a repro/test for such a case.
====================

Link: https://lore.kernel.org/r/20221127012412.37969-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

af_unix: Add test for sock_diag and UDIAG_SHOW_UID.

The test prog dumps a single AF_UNIX socket's UID with and without
unshare(CLONE_NEWUSER) and checks if it matches the result of getuid().

Without the preceding patch, the test prog is killed by a NULL deref
in sk_diag_dump_uid().

  # ./diag_uid
  TAP version 13
  1..2
  # Starting 2 tests from 3 test cases.
  #  RUN           diag_uid.uid.1 ...
  BUG: kernel NULL pointer dereference, address: 0000000000000270
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 105212067 P4D 105212067 PUD 1051fe067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP NOPTI
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
  RIP: 0010:sk_diag_fill (./include/net/sock.h:920 net/unix/diag.c:119 net/unix/diag.c:170)
  ...
  # 1: Test terminated unexpectedly by signal 9
  #          FAIL  diag_uid.uid.1
  not ok 1 diag_uid.uid.1
  #  RUN           diag_uid.uid_unshare.1 ...
  # 1: Test terminated by timeout
  #          FAIL  diag_uid.uid_unshare.1
  not ok 2 diag_uid.uid_unshare.1
  # FAILED: 0 / 2 tests passed.
  # Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0

With the patch, the test succeeds.

  # ./diag_uid
  TAP version 13
  1..2
  # Starting 2 tests from 3 test cases.
  #  RUN           diag_uid.uid.1 ...
  #            OK  diag_uid.uid.1
  ok 1 diag_uid.uid.1
  #  RUN           diag_uid.uid_unshare.1 ...
  #            OK  diag_uid.uid_unshare.1
  ok 2 diag_uid.uid_unshare.1
  # PASSED: 2 / 2 tests passed.
  # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

af_unix: Get user_ns from in_skb in unix_diag_get_exact().

Wei Chen reported a NULL deref in sk_user_ns() [0][1], and Paolo diagnosed
the root cause: in unix_diag_get_exact(), the newly allocated skb does not
have sk. [2]

We must get the user_ns from the NETLINK_CB(in_skb).sk and pass it to
sk_diag_fill().

[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000270
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 12bbce067 P4D 12bbce067 PUD 12bc40067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 0 PID: 27942 Comm: syz-executor.0 Not tainted 6.1.0-rc5-next-20221118 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:sk_user_ns include/net/sock.h:920 [inline]
RIP: 0010:sk_diag_dump_uid net/unix/diag.c:119 [inline]
RIP: 0010:sk_diag_fill+0x77d/0x890 net/unix/diag.c:170
Code: 89 ef e8 66 d4 2d fd c7 44 24 40 00 00 00 00 49 8d 7c 24 18 e8
54 d7 2d fd 49 8b 5c 24 18 48 8d bb 70 02 00 00 e8 43 d7 2d fd <48> 8b
9b 70 02 00 00 48 8d 7b 10 e8 33 d7 2d fd 48 8b 5b 10 48 8d
RSP: 0018:ffffc90000d67968 EFLAGS: 00010246
RAX: ffff88812badaa48 RBX: 0000000000000000 RCX: ffffffff840d481d
RDX: 0000000000000465 RSI: 0000000000000000 RDI: 0000000000000270
RBP: ffffc90000d679a8 R08: 0000000000000277 R09: 0000000000000000
R10: 0001ffffffffffff R11: 0001c90000d679a8 R12: ffff88812ac03800
R13: ffff88812c87c400 R14: ffff88812ae42210 R15: ffff888103026940
FS: 00007f08b4e6f700(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000270 CR3: 000000012c58b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
unix_diag_get_exact net/unix/diag.c:285 [inline]
unix_diag_handler_dump+0x3f9/0x500 net/unix/diag.c:317
__sock_diag_cmd net/core/sock_diag.c:235 [inline]
sock_diag_rcv_msg+0x237/0x250 net/core/sock_diag.c:266
netlink_rcv_skb+0x13e/0x250 net/netlink/af_netlink.c:2564
sock_diag_rcv+0x24/0x40 net/core/sock_diag.c:277
netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1356
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1932
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2476
___sys_sendmsg net/socket.c:2530 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2559
__do_sys_sendmsg net/socket.c:2568 [inline]
__se_sys_sendmsg net/socket.c:2566 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2566
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x4697f9
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f08b4e6ec48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000077bf80 RCX: 00000000004697f9
RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003
RBP: 00000000004d29e9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf80
R13: 0000000000000000 R14: 000000000077bf80 R15: 00007ffdb36bc6c0
</TASK>
Modules linked in:
CR2: 0000000000000270

[1]: https://lore.kernel.org/netdev/CAO4mrfdvyjFpokhNsiwZiP-wpdSD0AStcJwfKcKQdAALQ9_2Qw@mail.gmail.com/
[2]: https://lore.kernel.org/netdev/e04315e7c90d9a75613f3993c2baf2d344eef7eb.camel@redhat.com/

Fixes: cae9910e7344 ("net: Add UNIX_DIAG_UID to Netlink UNIX socket diagnostics.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Wei Chen <harperchen1110@gmail.com>
Diagnosed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Check for interval validity in all concatenation fields in
   nft_set_pipapo, from Stefano Brivio.

2) Missing preemption disabled in conntrack and flowtable stat
   updates, from Xin Long.

3) Fix compilation warning when CONFIG_NF_CONNTRACK_MARK=n.

Except for 3) which was a bug introduced in a recent fix in 6.1-rc
- anything else, broken for several releases.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark
  netfilter: conntrack: fix using __this_cpu_add in preemptible
  netfilter: flowtable_offload: fix using __this_cpu_add in preemptible
  netfilter: nft_set_pipapo: Actually validate intervals in fields after the first one
====================

Link: https://lore.kernel.org/r/20221130121934.1125-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethernet: ti: am65-cpsw: Fix RGMII configuration at SPEED_10

The am65-cpsw driver supports configuring all RGMII variants at interface
speed of 10 Mbps. However, in the process of shifting to the PHYLINK
framework, the support for all variants of RGMII except the
PHY_INTERFACE_MODE_RGMII variant was accidentally removed.

Fix this by using phy_interface_mode_is_rgmii() to check for all variants
of RGMII mode.

Fixes: e8609e69470f ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK")
Reported-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20221129050639.111142-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: broadcom: Add PTP_1588_CLOCK_OPTIONAL dependency for BCMGENET under ARCH_BCM2835

commit 8d820bc9d12b ("net: broadcom: Fix BCMGENET Kconfig") fixes the build
that contain 99addbe31f55 ("net: broadcom: Select BROADCOM_PHY for BCMGENET")
and enable BCMGENET=y but PTP_1588_CLOCK_OPTIONAL=m, which otherwise
leads to a link failure. However this may trigger a runtime failure.

Fix the original issue by propagating the PTP_1588_CLOCK_OPTIONAL dependency
of BROADCOM_PHY down to BCMGENET.

Fixes: 8d820bc9d12b ("net: broadcom: Fix BCMGENET Kconfig")
Fixes: 99addbe31f55 ("net: broadcom: Select BROADCOM_PHY for BCMGENET")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20221125115003.30308-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

igb: Allocate MSI-X vector when testing

Without this change, the interrupt test fail with MSI-X environment:

$ sudo ethtool -t enp0s2 offline
[   43.921783] igb 0000:00:02.0: offline testing starting
[   44.855824] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Down
[   44.961249] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   51.272202] igb 0000:00:02.0: testing shared interrupt
[   56.996975] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
The test result is FAIL
The test extra info:
Register test  (offline) 0
Eeprom test    (offline) 0
Interrupt test (offline) 4
Loopback test  (offline) 0
Link test   (on/offline) 0

Here, "4" means an expected interrupt was not delivered.

To fix this, route IRQs correctly to the first MSI-X vector by setting
IVAR_MISC. Also, set bit 0 of EIMS so that the vector will not be
masked. The interrupt test now runs properly with this change:

$ sudo ethtool -t enp0s2 offline
[   42.762985] igb 0000:00:02.0: offline testing starting
[   50.141967] igb 0000:00:02.0: testing shared interrupt
[   56.163957] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
The test result is PASS
The test extra info:
Register test  (offline) 0
Eeprom test    (offline) 0
Interrupt test (offline) 0
Loopback test  (offline) 0
Link test   (on/offline) 0

Fixes: 4eefa8f01314 ("igb: add single vector msi-x testing to interrupt test")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

e1000e: Fix TX dispatch condition

e1000_xmit_frame is expected to stop the queue and dispatch frames to
hardware if there is not sufficient space for the next frame in the
buffer, but sometimes it failed to do so because the estimated maximum
size of frame was wrong. As the consequence, the later invocation of
e1000_xmit_frame failed with NETDEV_TX_BUSY, and the frame in the buffer
remained forever, resulting in a watchdog failure.

This change fixes the estimated size by making it match with the
condition for NETDEV_TX_BUSY. Apparently, the old estimation failed to
account for the following lines which determines the space requirement
for not causing NETDEV_TX_BUSY:
    ```
     /* reserve a descriptor for the offload context */
     if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
     count++;
     count++;

     count += DIV_ROUND_UP(len, adapter->tx_fifo_limit);
    ```

This issue was found when running http-stress02 test included in Linux
Test Project 20220930 on QEMU with the following commandline:
```
qemu-system-x86_64 -M q35,accel=kvm -m 8G -smp 8
-drive if=virtio,format=raw,file=root.img,file.locking=on
-device e1000e,netdev=netdev
-netdev tap,script=ifup,downscript=no,id=netdev
```

Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark

All warnings (new ones prefixed by >>):

   net/netfilter/nf_conntrack_netlink.c: In function '__ctnetlink_glue_build':
>> net/netfilter/nf_conntrack_netlink.c:2674:13: warning: unused variable 'mark' [-Wunused-variable]
    2674 |         u32 mark;
         |             ^~~~

Fixes: 52d1aa8b8249 ("netfilter: conntrack: Fix data-races around ct mark")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Ivan Babrou <ivan@ivan.computer>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: fix using __this_cpu_add in preemptible

Currently in nf_conntrack_hash_check_insert(), when it fails in
nf_ct_ext_valid_pre/post(), NF_CT_STAT_INC() will be called in the
preemptible context, a call trace can be triggered:

   BUG: using __this_cpu_add() in preemptible [00000000] code: conntrack/1636
   caller is nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack]
   Call Trace:
    <TASK>
    dump_stack_lvl+0x33/0x46
    check_preemption_disabled+0xc3/0xf0
    nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack]
    ctnetlink_create_conntrack+0x3cd/0x4e0 [nf_conntrack_netlink]
    ctnetlink_new_conntrack+0x1c0/0x450 [nf_conntrack_netlink]
    nfnetlink_rcv_msg+0x277/0x2f0 [nfnetlink]
    netlink_rcv_skb+0x50/0x100
    nfnetlink_rcv+0x65/0x144 [nfnetlink]
    netlink_unicast+0x1ae/0x290
    netlink_sendmsg+0x257/0x4f0
    sock_sendmsg+0x5f/0x70

This patch is to fix it by changing to use NF_CT_STAT_INC_ATOMIC() for
nf_ct_ext_valid_pre/post() check in nf_conntrack_hash_check_insert(),
as well as nf_ct_ext_valid_post() in __nf_conntrack_confirm().

Note that nf_ct_ext_valid_pre() check in __nf_conntrack_confirm() is
safe to use NF_CT_STAT_INC(), as it's under local_bh_disable().

Fixes: c56716c69ce1 ("netfilter: extensions: introduce extension genid count")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'net-6.1-rc8-2' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and wifi.

  Current release - new code bugs:

   - eth: mlx5e:
      - use kvfree() in mlx5e_accel_fs_tcp_create()
      - MACsec, fix RX data path 16 RX security channel limit
      - MACsec, fix memory leak when MACsec device is deleted
      - MACsec, fix update Rx secure channel active field
      - MACsec, fix add Rx security association (SA) rule memory leak

  Previous releases - regressions:

   - wifi: cfg80211: don't allow multi-BSSID in S1G

   - stmmac: set MAC's flow control register to reflect current settings

   - eth: mlx5:
      - E-switch, fix duplicate lag creation
      - fix use-after-free when reverting termination table

  Previous releases - always broken:

   - ipv4: fix route deletion when nexthop info is not specified

   - bpf: fix a local storage BPF map bug where the value's spin lock
     field can get initialized incorrectly

   - tipc: re-fetch skb cb after tipc_msg_validate

   - wifi: wilc1000: fix Information Element parsing

   - packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE

   - sctp: fix memory leak in sctp_stream_outq_migrate()

   - can: can327: fix potential skb leak when netdev is down

   - can: add number of missing netdev freeing on error paths

   - aquantia: do not purge addresses when setting the number of rings

   - wwan: iosm:
      - fix incorrect skb length leading to truncated packet
      - fix crash in peek throughput test due to skb UAF"

* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
  net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
  MAINTAINERS: Update maintainer list for chelsio drivers
  ionic: update MAINTAINERS entry
  sctp: fix memory leak in sctp_stream_outq_migrate()
  packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
  net/mlx5: Lag, Fix for loop when checking lag
  Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
  net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
  net: tun: Fix use-after-free in tun_detach()
  net: mdiobus: fix unbalanced node reference count
  net: hsr: Fix potential use-after-free
  tipc: re-fetch skb cb after tipc_msg_validate
  mptcp: fix sleep in atomic at close time
  mptcp: don't orphan ssk in mptcp_close()
  dsa: lan9303: Correct stat name
  ipv4: Fix route deletion when nexthop info is not specified
  net: wwan: iosm: fix incorrect skb length
  net: wwan: iosm: fix crash in peek throughput test
  net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
  net: wwan: iosm: fix kernel test robot reported error
  ...

net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed

After system resumed on some environment board, the promiscuous mode
is disabled because the SoC turned off. So, call ravb_set_rx_mode() in
the ravb_resume() to fix the issue.

Reported-by: Tho Vu <tho.vu.wh@renesas.com>
Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20221128065604.1864391-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: Update maintainer list for chelsio drivers

This updates the maintainers for chelsio inline crypto drivers and
chelsio crypto drivers.

Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Link: https://lore.kernel.org/r/20221128231348.8225-1-ayush.sawal@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: update MAINTAINERS entry

Now that Pensando is a part of AMD we need to update
a couple of addresses. We're keeping the mailing list
address for the moment, but that will likely change in
the near future.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20221129011734.20849-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp: fix memory leak in sctp_stream_outq_migrate()

When sctp_stream_outq_migrate() is called to release stream out resources,
the memory pointed to by prio_head in stream out is not released.

The memory leak information is as follows:
unreferenced object 0xffff88801fe79f80 (size 64):
   comm "sctp_repo", pid 7957, jiffies 4294951704 (age 36.480s)
   hex dump (first 32 bytes):
     80 9f e7 1f 80 88 ff ff 80 9f e7 1f 80 88 ff ff  ................
     90 9f e7 1f 80 88 ff ff 90 9f e7 1f 80 88 ff ff  ................
   backtrace:
     [<ffffffff81b215c6>] kmalloc_trace+0x26/0x60
     [<ffffffff88ae517c>] sctp_sched_prio_set+0x4cc/0x770
     [<ffffffff88ad64f2>] sctp_stream_init_ext+0xd2/0x1b0
     [<ffffffff88aa2604>] sctp_sendmsg_to_asoc+0x1614/0x1a30
     [<ffffffff88ab7ff1>] sctp_sendmsg+0xda1/0x1ef0
     [<ffffffff87f765ed>] inet_sendmsg+0x9d/0xe0
     [<ffffffff8754b5b3>] sock_sendmsg+0xd3/0x120
     [<ffffffff8755446a>] __sys_sendto+0x23a/0x340
     [<ffffffff87554651>] __x64_sys_sendto+0xe1/0x1b0
     [<ffffffff89978b49>] do_syscall_64+0x39/0xb0
     [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Link: https://syzkaller.appspot.com/bug?exrid=29c402e56c4760763cc0
Fixes: 637784ade221 ("sctp: introduce priority based stream scheduler")
Reported-by: syzbot+29c402e56c4760763cc0@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20221126031720.378562-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE

CHECKSUM_COMPLETE signals that skb->csum stores the sum over the
entire packet. It does not imply that an embedded l4 checksum
field has been validated.

Fixes: 682f048bd494 ("af_packet: pass checksum validation status to the user")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221128161812.640098-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Lag, Fix for loop when checking lag

The cited commit adds a for loop to check if each port supports lag
or not. But dev is not initialized correctly. Fix it by initializing
dev for each iteration.

Fixes: e87c6a832f88 ("net/mlx5: E-switch, Fix duplicate lag creation")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221129093006.378840-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"

This reverts commit c0071be0e16c461680d87b763ba1ee5e46548fde.

The cited commit removed the validity checks which initialized the
window_sz and never removed the use of the now uninitialized variable,
so now we are left with wrong value in the window size and the following
clang warning: [-Wuninitialized]
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c:232:45:
warning: variable 'window_sz' is uninitialized when used here
MLX5_SET(macsec_aso, aso_ctx, window_size, window_sz);

Revet at this time to address the clang issue due to lack of time to
test the proper solution.

Fixes: c0071be0e16c ("net/mlx5e: MACsec, remove replay window size limitation in offload path")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221129093006.378840-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions

rhashtable_lookup_fast() returns NULL when failed instead of error
pointer.

Fixes: 396b80cb5cc8 ("net: marvell: prestera: Add neighbour cache accounting")
Fixes: 0a23ae237171 ("net: marvell: prestera: Add router nexthops ABI")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221125012751.23249-1-shangxiaojing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: tun: Fix use-after-free in tun_detach()

syzbot reported use-after-free in tun_detach() [1]. This causes call
trace like below:

==================================================================
BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673

CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x15e/0x461 mm/kasan/report.c:395
kasan_report+0xbf/0x1f0 mm/kasan/report.c:495
notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
netdev_wait_allrefs_any net/core/dev.c:10237 [inline]
netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351
tun_detach drivers/net/tun.c:704 [inline]
tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467
__fput+0x27c/0xa90 fs/file_table.c:320
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xb3d/0x2a30 kernel/exit.c:820
do_group_exit+0xd4/0x2a0 kernel/exit.c:950
get_signal+0x21b1/0x2440 kernel/signal.c:2858
arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The cause of the issue is that sock_put() from __tun_detach() drops
last reference count for struct net, and then notifier_call_chain()
from netdev_state_change() accesses that struct net.

This patch fixes the issue by calling sock_put() from tun_detach()
after all necessary accesses for the struct net has done.

Fixes: 83c1f36f9880 ("tun: send netlink notification when the device is modified")
Reported-by: syzbot+106f9b687cd64ee70cd1@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=96eb7f1ce75ef933697f24eeab928c4a716edefe
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20221124175134.1589053-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

afs: Fix fileserver probe RTT handling

The fileserver probing code attempts to work out the best fileserver to
use for a volume by retrieving the RTT calculated by AF_RXRPC for the
probe call sent to each server and comparing them. Sometimes, however,
no RTT estimate is available and rxrpc_kernel_get_srtt() returns false,
leading good fileservers to be given an RTT of UINT_MAX and thus causing
the rotation algorithm to ignore them.

Fix afs_select_fileserver() to ignore rxrpc_kernel_get_srtt()'s return
value and just take the estimated RTT it provides - which will be capped
at 1 second.

Fixes: 1d4adfaf6574 ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166965503999.3392585.13954054113218099395.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net: mdiobus: fix unbalanced node reference count

I got the following report while doing device(mscc-miim) load test
with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:

  OF: ERROR: memory leak, expected refcount 1 instead of 2,
  of_node_get()/of_node_put() unbalanced - destroy cset entry:
  attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0

If the 'fwnode' is not an acpi node, the refcount is get in
fwnode_mdiobus_phy_device_register(), but it has never been
put when the device is freed in the normal path. So call
fwnode_handle_put() in phy_device_release() to avoid leak.

If it's an acpi node, it has never been get, but it's put
in the error path, so call fwnode_handle_get() before
phy_device_register() to keep get/put operation balanced.

Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hsr: Fix potential use-after-free

The skb is delivered to netif_rx() which may free it, after calling this,
dereferencing skb may trigger use-after-free.

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221125075724.27912-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tipc: re-fetch skb cb after tipc_msg_validate

As the call trace shows, the original skb was freed in tipc_msg_validate(),
and dereferencing the old skb cb would cause an use-after-free crash.

  BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc]
  Call Trace:
   <IRQ>
   tipc_crypto_rcv_complete+0x1835/0x2240 [tipc]
   tipc_crypto_rcv+0xd32/0x1ec0 [tipc]
   tipc_rcv+0x744/0x1150 [tipc]
  ...
  Allocated by task 47078:
   kmem_cache_alloc_node+0x158/0x4d0
   __alloc_skb+0x1c1/0x270
   tipc_buf_acquire+0x1e/0xe0 [tipc]
   tipc_msg_create+0x33/0x1c0 [tipc]
   tipc_link_build_proto_msg+0x38a/0x2100 [tipc]
   tipc_link_timeout+0x8b8/0xef0 [tipc]
   tipc_node_timeout+0x2a1/0x960 [tipc]
   call_timer_fn+0x2d/0x1c0
  ...
  Freed by task 47078:
   tipc_msg_validate+0x7b/0x440 [tipc]
   tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc]
   tipc_crypto_rcv+0xd32/0x1ec0 [tipc]
   tipc_rcv+0x744/0x1150 [tipc]

This patch fixes it by re-fetching the skb cb from the new allocated skb
after calling tipc_msg_validate().

Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1b1cdba762915325bd8ef9a98d0276eb673df2a5.1669398403.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-more-fixes-for-6-1'

Matthieu Baerts says:

====================
mptcp: More fixes for 6.1

Patch 1 makes sure data received after a close will still be processed
and acked as exepected. This is a regression for a commit introduced
in v5.11.

Patch 2 fixes a kernel deadlock found when working on validating TFO
with a listener MPTCP socket. This is not directly linked to TFO but
it is easier to reproduce the issue with it. This fixes a bug introduced
by a commit from v6.0.
====================

Link: https://lore.kernel.org/r/20221128154239.1999234-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix sleep in atomic at close time

Matt reported a splat at msk close time:

    BUG: sleeping function called from invalid context at net/mptcp/protocol.c:2877
    in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 155, name: packetdrill
    preempt_count: 201, expected: 0
    RCU nest depth: 0, expected: 0
    4 locks held by packetdrill/155:
    #0: ffff888001536990 (&sb->s_type->i_mutex_key#6){+.+.}-{3:3}, at: __sock_release (net/socket.c:650)
    #1: ffff88800b498130 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close (net/mptcp/protocol.c:2973)
    #2: ffff88800b49a130 (sk_lock-AF_INET/1){+.+.}-{0:0}, at: __mptcp_close_ssk (net/mptcp/protocol.c:2363)
    #3: ffff88800b49a0b0 (slock-AF_INET){+...}-{2:2}, at: __lock_sock_fast (include/net/sock.h:1820)
    Preemption disabled at:
    0x0
    CPU: 1 PID: 155 Comm: packetdrill Not tainted 6.1.0-rc5 #365
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
    Call Trace:
    <TASK>
    dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
    __might_resched.cold (kernel/sched/core.c:9891)
    __mptcp_destroy_sock (include/linux/kernel.h:110)
    __mptcp_close (net/mptcp/protocol.c:2959)
    mptcp_subflow_queue_clean (include/net/sock.h:1777)
    __mptcp_close_ssk (net/mptcp/protocol.c:2363)
    mptcp_destroy_common (net/mptcp/protocol.c:3170)
    mptcp_destroy (include/net/sock.h:1495)
    __mptcp_destroy_sock (net/mptcp/protocol.c:2886)
    __mptcp_close (net/mptcp/protocol.c:2959)
    mptcp_close (net/mptcp/protocol.c:2974)
    inet_release (net/ipv4/af_inet.c:432)
    __sock_release (net/socket.c:651)
    sock_close (net/socket.c:1367)
    __fput (fs/file_table.c:320)
    task_work_run (kernel/task_work.c:181 (discriminator 1))
    exit_to_user_mode_prepare (include/linux/resume_user_mode.h:49)
    syscall_exit_to_user_mode (kernel/entry/common.c:130)
    do_syscall_64 (arch/x86/entry/common.c:87)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

We can't call mptcp_close under the 'fast' socket lock variant, replace
it with a sock_lock_nested() as the relevant code is already under the
listening msk socket lock protection.

Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/316
Fixes: 30e51b923e43 ("mptcp: fix unreleased socket in accept queue")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: don't orphan ssk in mptcp_close()

All of the subflows of a msk will be orphaned in mptcp_close(), which
means the subflows are in DEAD state. After then, DATA_FIN will be sent,
and the other side will response with a DATA_ACK for this DATA_FIN.

However, if the other side still has pending data, the data that received
on these subflows will not be passed to the msk, as they are DEAD and
subflow_data_ready() will not be called in tcp_data_ready(). Therefore,
these data can't be acked, and they will be retransmitted again and again,
until timeout.

Fix this by setting ssk->sk_socket and ssk->sk_wq to 'NULL', instead of
orphaning the subflows in __mptcp_close(), as Paolo suggested.

Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close")
Reviewed-by: Biao Jiang <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dsa: lan9303: Correct stat name

This patch changes the reported ethtool statistics for the lan9303
family of parts covered by this driver.

The TxUnderRun statistic label is renamed to RxShort to accurately
reflect what stat the device is reporting. I did not reorder the
statistics as that might cause problems with existing user code that
are expecting the stats at a certain offset.

Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221128193559.6572-1-jerry.ray@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2022-11-28' of git://git./linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.1

Third, and hopefully final, set of fixes for v6.1. We are marking the
rsi driver as orphan, have some Information Element parsing fixes to
wilc1000 driver and three small fixes to the stack.

* tag 'wireless-2022-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration
  wifi: cfg80211: don't allow multi-BSSID in S1G
  wifi: cfg80211: fix buffer overflow in elem comparison
  wifi: wilc1000: validate number of channels
  wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_CHANNEL_LIST attribute
  wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_OPER_CHANNEL attribute
  wifi: wilc1000: validate pairwise and authentication suite offsets
  MAINTAINERS: mark rsi wifi driver as orphan
====================

Link: https://lore.kernel.org/r/20221128113513.6F459C433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
bpf 2022-11-25

We've added 10 non-merge commits during the last 8 day(s) which contain
a total of 7 files changed, 48 insertions(+), 30 deletions(-).

The main changes are:

1) Several libbpf ringbuf fixes related to probing for its availability,
   size overflows when mmaping a 2G ringbuf and rejection of invalid
   reservationsizes, from Hou Tao.

2) Fix a buggy return pointer in libbpf for attach_raw_tp function,
   from Jiri Olsa.

3) Fix a local storage BPF map bug where the value's spin lock field
   can get initialized incorrectly, from Xu Kuohai.

4) Two follow-up fixes in kprobe_multi BPF selftests for BPF CI,
   from Jiri Olsa.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Make test_bench_attach serial
  selftests/bpf: Filter out default_idle from kprobe_multi bench
  bpf: Set and check spin lock value in sk_storage_map_test
  bpf: Do not copy spin lock field from user in bpf_selem_alloc
  libbpf: Check the validity of size in user_ring_buffer__reserve()
  libbpf: Handle size overflow for user ringbuf mmap
  libbpf: Handle size overflow for ringbuf mmap
  libbpf: Use page size as max_entries when probing ring buffer map
  bpf, perf: Use subprog name when reporting subprog ksymbol
  libbpf: Use correct return pointer in attach_raw_tp
====================

Link: https://lore.kernel.org/r/20221125001034.29473-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv4: Fix route deletion when nexthop info is not specified

When the kernel receives a route deletion request from user space it
tries to delete a route that matches the route attributes specified in
the request.

If only prefix information is specified in the request, the kernel
should delete the first matching FIB alias regardless of its associated
FIB info. However, an error is currently returned when the FIB info is
backed by a nexthop object:

# ip nexthop add id 1 via 192.0.2.2 dev dummy10
# ip route add 198.51.100.0/24 nhid 1
# ip route del 198.51.100.0/24
RTNETLINK answers: No such process

Fix by matching on such a FIB info when legacy nexthop attributes are
not specified in the request. An earlier check already covers the case
where a nexthop ID is specified in the request.

Add tests that cover these flows. Before the fix:

# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes           [FAIL]

Tests passed:  11
Tests failed:   1

After the fix:

# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes           [ OK ]

Tests passed:  12
Tests failed:   0

No regressions in other tests:

# ./fib_nexthops.sh
...
Tests passed: 228
Tests failed:   0

# ./fib_tests.sh
...
Tests passed: 186
Tests failed:   0

Cc: stable@vger.kernel.org
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e690 ("net: ipv4: fix route with nexthop object delete warning")
Fixes: 61b91eb33a69 ("ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221124210932.2470010-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'devicetree-fixes-for-6.1-2' of git://git./linux/kernel/git/robh/linux

Pull devicetree fix from Rob Herring:

- Fix DT node reference counting for of_fwnode_get_reference_args()
exit path

* tag 'devicetree-fixes-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: property: decrement node refcount in of_fwnode_get_reference_args()

Merge tag 'trace-v6.1-rc6' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fix osnoise duration type to 64bit not 32bit

- Have histogram triggers be able to handle an unexpected NULL pointer
   for the record event, which can happen when the histogram first
   starts up

- Clear out ring buffers when dynamic events are removed, as the type
   that is saved in the ring buffer is used to read the event, and a
   stale type that is reused by another event could cause use after free
   issues

- Trivial comment fix

- Fix memory leak in user_event_create()

* tag 'trace-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Free buffers when a used dynamic event is removed
  tracing: Add tracing_reset_all_online_cpus_unlocked() function
  tracing: Fix race where histograms can be called before the event
  tracing/osnoise: Fix duration type
  tracing/user_events: Fix memory leak in user_event_create()
  tracing/hist: add in missing * in comment blocks

Merge tag 'fuse-fixes-6.1-rc8' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse fix from Miklos Szeredi:
"Fix a regression introduced in -rc4"

* tag 'fuse-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: lock inode unconditionally in fuse_fallocate()

netfilter: flowtable_offload: fix using __this_cpu_add in preemptible

flow_offload_queue_work() can be called in workqueue without
bh disabled, like the call trace showed in my act_ct testing,
calling NF_FLOW_TABLE_STAT_INC() there would cause a call
trace:

  BUG: using __this_cpu_add() in preemptible [00000000] code: kworker/u4:0/138560
  caller is flow_offload_queue_work+0xec/0x1b0 [nf_flow_table]
  Workqueue: act_ct_workqueue tcf_ct_flow_table_cleanup_work [act_ct]
  Call Trace:
   <TASK>
   dump_stack_lvl+0x33/0x46
   check_preemption_disabled+0xc3/0xf0
   flow_offload_queue_work+0xec/0x1b0 [nf_flow_table]
   nf_flow_table_iterate+0x138/0x170 [nf_flow_table]
   nf_flow_table_free+0x140/0x1a0 [nf_flow_table]
   tcf_ct_flow_table_cleanup_work+0x2f/0x2b0 [act_ct]
   process_one_work+0x6a3/0x1030
   worker_thread+0x8a/0xdf0

This patch fixes it by using NF_FLOW_TABLE_STAT_INC_ATOMIC()
instead in flow_offload_queue_work().

Note that for FLOW_CLS_REPLACE branch in flow_offload_queue_work(),
it may not be called in preemptible path, but it's good to use
NF_FLOW_TABLE_STAT_INC_ATOMIC() for all cases in
flow_offload_queue_work().

Fixes: b038177636f8 ("netfilter: nf_flow_table: count pending offload workqueue tasks")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_pipapo: Actually validate intervals in fields after the first one

Embarrassingly, nft_pipapo_insert() checked for interval validity in
the first field only.

The start_p and end_p pointers were reset to key data from the first
field at every iteration of the loop which was supposed to go over
the set fields.

Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge branch 'wwan-iosm-fixes'

M Chetan Kumar says:

====================
net: wwan: iosm: fix build errors & bugs

This patch series fixes iosm driver bugs & build errors.

PATCH1: Fix kernel build robot reported error.
PATCH2: Fix build error reported on armhf while preparing
6.1-rc5 for Debian.
PATCH3: Fix UL throughput crash.
PATCH4: Fix incorrect skb length.

Refer to commit message for details.

Changes since v1:
* PATCH4: Fix sparse warning.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: wwan: iosm: fix incorrect skb length

skb passed to network layer contains incorrect length.

In mux aggregation protocol, the datagram block received
from device contains block signature, packet & datagram
header. The right skb len to be calculated by subracting
datagram pad len from datagram length.

Whereas in mux lite protocol, the skb contains single
datagram so skb len is calculated by subtracting the
packet offset from datagram header.

Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: wwan: iosm: fix crash in peek throughput test

Peek throughput UL test is resulting in crash. If the UL
transfer block free list is exhaust, the peeked skb is freed.
In the next transfer freed skb is referred from UL list which
results in crash.

Don't free the skb if UL transfer blocks are unavailable. The
pending skb will be picked for transfer on UL transfer block
available.

Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type

Fix build error reported on armhf while preparing 6.1-rc5
for Debian.

iosm_ipc_protocol.c:244:36: error: passing argument 3 of
'dma_alloc_coherent' from incompatible pointer type.

Change phy_ap_shm type from phys_addr_t to dma_addr_t.

Fixes: faed4c6f6f48 ("net: iosm: shared memory protocol")
Reported-by: Bonaccorso Salvatore <carnil@debian.org>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: wwan: iosm: fix kernel test robot reported error

sparse warnings - iosm_ipc_mux_codec.c:1474 using plain
integer as NULL pointer.

Use skb_trim() to reset skb tail & len.

Fixes: 9413491e20e1 ("net: iosm: encode or decode datagram")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phylink: fix PHY validation with rate adaption

Tim Harvey reports that link modes which he does not expect to be
supported are being advertised, and this is because of the workaround
we have for PHYs that switch interface modes.

Fix this up by checking whether rate matching will be used for the
requested interface mode, and if rate matching will be used, perform
validation only with the requested interface mode, rather than invoking
this workaround.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: nixge: fix NULL dereference

In function nixge_hw_dma_bd_release() dereference of NULL pointer
priv->rx_bd_v is possible for the case of its allocation failure in
nixge_hw_dma_bd_init().

Move for() loop with priv->rx_bd_v dereference under the check for
its validity.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Yuri Karpov <YKarpov@ispras.ru>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/9p: Fix a potential socket leak in p9_socket_open

Both p9_fd_create_tcp() and p9_fd_create_unix() will call
p9_socket_open(). If the creation of p9_trans_fd fails,
p9_fd_create_tcp() and p9_fd_create_unix() will return an
error directly instead of releasing the cscoket, which will
result in a socket leak.

This patch adds sock_release() to fix the leak issue.

Fixes: 6b18662e239a ("9p connect fixes")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
ACKed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: net_netdev: Fix error handling in ntb_netdev_init_module()

The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_register_client() failed, the NTB client device is not
unregistered.

Fix by unregister NTB client device when ntb_transport_register_client()
failed.

Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: am65-cpsw: fix error handling in am65_cpsw_nuss_probe()

The am65_cpsw_nuss_cleanup_ndev() function calls unregister_netdev()
even if register_netdev() fails, which triggers WARN_ON(1) in
unregister_netdevice_many(). To fix it, make sure that
unregister_netdev() is called only on registered netdev.

Compile tested only.

Fixes: 84b4aa493249 ("net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2022-11-24' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-fixes-2022-11-24
This series provides bug fixes to mlx5 driver.

Focusing on error handling and proper memory management in mlx5, in
general and in the newly added macsec module.

I still have few fixes left in my queue and I hope those will be the
last ones for mlx5 for this cycle.

Please pull and let me know if there is any problem.

Happy thanksgiving.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '10GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-11-23 (ixgbevf, i40e, fm10k, iavf, e100)

This series contains updates to various Intel drivers.

Shang XiaoJing fixes init module error path stop to resource leaks for
ixgbevf and i40e.

Yuan Can also does the same for fm10k and iavf.

Wang Hai stops freeing of skb as it was causing use after free error for
e100.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 6.1-rc7

Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs

Pull vfs fix from Al Viro:
"Amir's copy_file_range() fix"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: fix copy_file_range() averts filesystem freeze protection

Merge tag 'usb-6.1-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.1-rc7 that resolve some reported
  problems:

   - cdnsp driver fixes for reported problems

   - dwc3 fixes for some small reported problems

   - uvc gadget driver fix for reported regression

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1
  usb: dwc3: gadget: Clear ep descriptor last
  usb: dwc3: exynos: Fix remove() function
  usb: cdnsp: Fix issue with Clear Feature Halt Endpoint
  usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer
  usb: gadget: uvc: also use try_format in set_format

Merge tag 'char-misc-6.1-rc7' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 6.1-rc7, they include:

   - build warning fix for the vdso when using new versions of grep

   - iio driver fixes for reported issues

   - small nvmem driver fixes

   - fpga Kconfig fix

   - interconnect dt binding fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lib/vdso: use "grep -E" instead of "egrep"
  nvmem: lan9662-otp: Change return type of lan9662_otp_wait_flag_clear()
  nvmem: rmem: Fix return value check in rmem_read()
  fpga: m10bmc-sec: Fix kconfig dependencies
  dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
  iio: adc: aspeed: Remove the trim valid dts property.
  iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
  iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
  iio: light: rpr0521: add missing Kconfig dependencies
  iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
  iio: health: afe4403: Fix oob read in afe4403_read_raw
  iio: light: apds9960: fix wrong register for gesture gain
  dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible

Merge tag 'timers_urgent_for_v6.1_rc7' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Borislav Petkov:

- Return the proper timer register width (31 bits) for a 32-bit signed
   register in order to avoid a timer interrupt storm on ARM XGene-1
   hardware running in NO_HZ mode

* tag 'timers_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error

Merge tag 'objtool_urgent_for_v6.1_rc7' of git://git./linux/kernel/git/tip/tip

Pull objtool fix from Borislav Petkov:

- Handle different output of readelf on different distros running
ppc64le which confuses faddr2line's function offsets conversion

* tag 'objtool_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
scripts/faddr2line: Fix regression in name resolution on ppc64le

Merge tag 'x86_urgent_for_v6.1_rc7' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

- ioremap: mask out the bits which are not part of the physical address
   *after* the size computation is done to prevent any hypothetical
   ioremap failures

- Change the MSR save/restore functionality during suspend to rely on
   flags denoting that the related MSRs are actually supported vs
   reading them and assuming they are (an Atom one allows reading but
   not writing, thus breaking this scheme at resume time)

- prevent IV reuse in the AES-GCM communication scheme between SNP
   guests and the AMD secure processor

* tag 'x86_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioremap: Fix page aligned size calculation in __ioremap_caller()
  x86/pm: Add enumeration check before spec MSRs save/restore setup
  x86/tsx: Add a feature bit for TSX control MSR support
  virt/sev-guest: Prevent IV reuse in the SNP guest driver

Merge tag 'perf_urgent_for_v6.1_rc7' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:
"Two more fixes to the perf sigtrap handling:

   - output the address in the sample only when it has been requested

   - handle the case where user-only events can hit in kernel and thus
     upset the sigtrap sanity checking"

* tag 'perf_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Consider OS filter fail
  perf: Fixup SIGTRAP and sample_flags interaction

net: phy: fix null-ptr-deref while probe() failed

I got a null-ptr-deref report as following when doing fault injection test:

BUG: kernel NULL pointer dereference, address: 0000000000000058
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G    B            N 6.1.0-rc3+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x23e/0x2d0
bus_remove_device+0x1bd/0x240
device_del+0x357/0x770
phy_device_remove+0x11/0x30
mdiobus_unregister+0xa5/0x140
release_nodes+0x6a/0xa0
devres_release_all+0xf8/0x150
device_unbind_cleanup+0x19/0xd0

//probe path:
phy_device_register()
  device_add()

phy_connect
  phy_attach_direct() //set device driver
    probe() //it's failed, driver is not bound
    device_bind_driver() // probe failed, it's not called

//remove path:
phy_device_remove()
  device_del()
    device_release_driver_internal()
      __device_release_driver() //dev->drv is not NULL
        klist_remove() <- knode_driver is not added yet, cause null-ptr-deref

In phy_attach_direct(), after setting the 'dev->driver', probe() fails,
device_bind_driver() is not called, so the knode_driver->n_klist is not
set, then it causes null-ptr-deref in __device_release_driver() while
deleting device. Fix this by setting dev->driver to NULL in the error
path in phy_attach_direct().

Fixes: e13934563db0 ("[PATCH] PHY Layer fixup")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"x86:

   - Fixes for Xen emulation. While nobody should be enabling it in the
     kernel (the only public users of the feature are the selftests),
     the bug effectively allows userspace to read arbitrary memory.

   - Correctness fixes for nested hypervisors that do not intercept INIT
     or SHUTDOWN on AMD; the subsequent CPU reset can cause a
     use-after-free when it disables virtualization extensions. While
     downgrading the panic to a WARN is quite easy, the full fix is a
     bit more laborious; there are also tests. This is the bulk of the
     pull request.

   - Fix race condition due to incorrect mmu_lock use around
     make_mmu_pages_available().

  Generic:

   - Obey changes to the kvm.halt_poll_ns module parameter in VMs not
     using KVM_CAP_HALT_POLL, restoring behavior from before the
     introduction of the capability"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Update gfn_to_pfn_cache khva when it moves within the same page
  KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0
  KVM: x86/xen: Validate port number in SCHEDOP_poll
  KVM: x86/mmu: Fix race condition in direct_page_fault
  KVM: x86: remove exit_int_info warning in svm_handle_exit
  KVM: selftests: add svm part to triple_fault_test
  KVM: x86: allow L1 to not intercept triple fault
  kvm: selftests: add svm nested shutdown test
  KVM: selftests: move idt_entry to header
  KVM: x86: forcibly leave nested mode on vCPU reset
  KVM: x86: add kvm_leave_nested
  KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use
  KVM: x86: nSVM: leave nested mode on vCPU free
  KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL
  KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling
  KVM: Cap vcpu->halt_poll_ns before halting rather than after

Merge tag '6.1-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Two small cifs/smb3 client fixes:

   - an unlock missing in an error path in copychunk_range found by
     xfstest 476

   - a fix for a use after free in a debug code path"

* tag '6.1-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix missing unlock in cifs_file_copychunk_range()
  cifs: Use after free in debug code

Merge tag 'kbuild-fixes-v6.1-4' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- Fix CC_HAS_ASM_GOTO_TIED_OUTPUT test in Kconfig

- Fix noisy "No such file or directory" message when
   KBUILD_BUILD_VERSION is passed

- Include rust/ in source tarballs

- Fix missing FORCE for ARCH=nios2 builds

* tag 'kbuild-fixes-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  nios2: add FORCE for vmlinuz.gz
  scripts: add rust in scripts/Makefile.package
  kbuild: fix "cat: .version: No such file or directory"
  init/Kconfig: fix CC_HAS_ASM_GOTO_TIED_OUTPUT test with dash

nios2: add FORCE for vmlinuz.gz

Add FORCE to placate a warning from make:

arch/nios2/boot/Makefile:24: FORCE prerequisite is missing

Fixes: 2fc8483fdcde ("nios2: Build infrastructure")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>

Merge tag 'nfsd-6.1-6' of git://git./linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

- Fix rare data corruption on READ operations

* tag 'nfsd-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix reads with a non-zero offset that don't end on a page boundary

Merge tag 'for-v6.1-rc' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply fixes from Sebastian Reichel:

- rk817: Two error handling fixes

- ip5xxx: fix inter overflow in current calculation

- ab8500: fix thermal zone probing

* tag 'for-v6.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: ab8500: Defer thermal zone probe
  power: supply: ip5xxx: Fix integer overflow in current_now calculation
  power: supply: rk817: Change rk817_chg_cur_to_reg to int
  power: supply: rk817: check correct variable

Merge tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- A few fixes for s390 sads (Stefan, Colin)

- Ensure that ublk doesn't reorder requests, as that can be problematic
   on devices that need specific ordering (Ming)

- Fix a queue reference leak in disk allocation handling (Christoph)

* tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux:
  ublk_drv: don't forward io commands in reserve order
  s390/dasd: fix possible buffer overflow in copy_pair_show
  s390/dasd: fix no record found for raw_track_access
  s390/dasd: increase printing of debug data payload
  s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid"
  blk-mq: fix queue reference leak on blk_mq_alloc_disk_for_queue failure

Merge tag 'io_uring-6.1-2022-11-25' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:

- A few poll related fixes. One fixing a race condition between poll
   cancelation and trigger, and one making the overflow handling a bit
   more robust (Lin, Pavel)

- Fix an fput() for error handling in the direct file table (Lin)

- Fix for a regression introduced in this cycle, where we don't always
   get TIF_NOTIFY_SIGNAL cleared appropriately (me)

* tag 'io_uring-6.1-2022-11-25' of git://git.kernel.dk/linux:
  io_uring: clear TIF_NOTIFY_SIGNAL if set and task_work not available
  io_uring/poll: fix poll_refs race with cancelation
  io_uring/filetable: fix file reference underflow
  io_uring: make poll refs more robust
  io_uring: cmpxchg for poll arm refs release

Merge tag 'zonefs-6.1-rc7' of git://git./linux/kernel/git/dlemoal/zonefs

Pull zonefs fixes from Damien Le Moal:

- Fix a race between zonefs module initialization of sysfs attribute
   directory and mounting a drive (from Xiaoxu).

- Fix active zone accounting in the rare case of an IO error due to a
   zone transition to offline or read-only state (from me).

* tag 'zonefs-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Fix active zone accounting
  zonefs: Fix race between modprobe and mount

Merge tag 'regulator-fix-v6.1-rc6' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"This is more changes than I'd like this late although the diffstat is
  still fairly small, I kept on holding off as new fixes came in to give
  things time to soak in -next but should probably have tagged and sent
  an additional pull request earlier.

  There's some relatively large fixes to the twl6030 driver to fix
  issues with the TWL6032 variant which resulted from some work on the
  core TWL6030 driver, a couple of fixes for error handling paths
  (mostly in the core), and a nice stability fix for the sgl51000 driver
  that's been pulled out of a BSP"

* tag 'regulator-fix-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: twl6030: fix get status of twl6032 regulators
  regulator: twl6030: re-add TWL6032_SUBCLASS
  regulator: slg51000: Wait after asserting CS pin
  regulator: core: fix UAF in destroy_regulator()
  regulator: rt5759: fix OOB in validate_desc()
  regulator: core: fix kobject release warning and memory leak in regulator_register()

Merge tag 'for-6.1-rc6-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- fix a regression in nowait + buffered write

- in zoned mode fix endianness when comparing super block generation

- locking and lockdep fixes:
     - fix potential sleeping under spinlock when setting qgroup limit
     - lockdep warning fixes when btrfs_path is freed after copy_to_user
     - do not modify log tree while holding a leaf from fs tree locked

- fix freeing of sysfs files of static features on error

- use kv.alloc for zone map allocation as a fallback to avoid warnings
   due to high order allocation

- send, avoid unaligned encoded writes when attempting to clone range

* tag 'for-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: sysfs: normalize the error handling branch in btrfs_init_sysfs()
  btrfs: do not modify log tree while holding a leaf from fs tree locked
  btrfs: use kvcalloc in btrfs_get_dev_zone_info
  btrfs: qgroup: fix sleep from invalid context bug in btrfs_qgroup_inherit()
  btrfs: send: avoid unaligned encoded writes when attempting to clone range
  btrfs: zoned: fix missing endianness conversion in sb_write_pointer
  btrfs: free btrfs_path before copying subvol info to userspace
  btrfs: free btrfs_path before copying fspath to userspace
  btrfs: free btrfs_path before copying inodes to userspace
  btrfs: free btrfs_path before copying root refs to userspace
  btrfs: fix assertion failure and blocking during nowait buffered write

Merge tag 'pm-6.1-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These revert a recent change in the schedutil cpufreq governor that
  had not been expected to make any functional difference, but turned
  out to introduce a performance regression, fix an initialization issue
  in the amd-pstate driver and make it actually replace the venerable
  ACPI cpufreq driver on the supported systems by default.

  Specifics:

   - Revert a recent schedutil cpufreq governor change that introduced a
     performace regression on Pixel 6 (Sam Wu)

   - Fix amd-pstate driver initialization after running the kernel via
     kexec (Wyes Karny)

   - Turn amd-pstate into a built-in driver which allows it to take
     precedence over acpi-cpufreq by default on supported systems and
     amend it with a mechanism to disable this behavior (Perry Yuan)

   - Update amd-pstate documentation in accordance with the other
     changes made to it (Perry Yuan)"

* tag 'pm-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Documentation: add amd-pstate kernel command line options
  Documentation: amd-pstate: add driver working mode introduction
  cpufreq: amd-pstate: add amd-pstate driver parameter for mode selection
  cpufreq: amd-pstate: change amd-pstate driver to be built-in type
  cpufreq: amd-pstate: cpufreq: amd-pstate: reset MSR_AMD_PERF_CTL register at init
  Revert "cpufreq: schedutil: Move max CPU capacity to sugov_policy"

Merge tag 's390-6.1-6' of git://git./linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

- Fix size of incorrectly increased from four to eight bytes TOD field
   of crash dump save area. As result in case of kdump NT_S390_TODPREG
   ELF notes section contains correct value and "detected read beyond
   size of field" compiler warning goes away.

- Fix memory leak in cryptographic Adjunct Processors (AP) module on
   initialization failure path.

- Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and Alexander
   Gordeev <agordeev@linux.ibm.com> as S390 memory management
   maintainers. Also rename the S390 section to S390 ARCHITECTURE to be
   a bit more precise.

* tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  MAINTAINERS: add S390 MM section
  s390/crashdump: fix TOD programmable field size
  s390/ap: fix memory leak in ap_init_qci_info()

Merge tag 'hyperv-fixes-signed-20221125' of git://git./linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

- Fix IRTE allocation in Hyper-V PCI controller (Dexuan Cui)

- Fix handling of SCSI srb_status and capacity change events (Michael
   Kelley)

- Restore VP assist page after CPU offlining and onlining (Vitaly
   Kuznetsov)

- Fix some memory leak issues in VMBus (Yang Yingliang)

* tag 'hyperv-fixes-signed-20221125' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register()
  Drivers: hv: vmbus: fix double free in the error path of vmbus_add_channel_work()
  PCI: hv: Only reuse existing IRTE allocation for Multi-MSI
  scsi: storvsc: Fix handling of srb_status and capacity change events
  x86/hyperv: Restore VP assist page after cpu offlining/onlining

Merge tag 'mm-hotfixes-stable-2022-11-24' of git://git./linux/kernel/git/akpm/mm

Pull hotfixes from Andrew Morton:
"24 MM and non-MM hotfixes. 8 marked cc:stable and 16 for post-6.0
  issues.

  There have been a lot of hotfixes this cycle, and this is quite a
  large batch given how far we are into the -rc cycle. Presumably a
  reflection of the unusually large amount of MM material which went
  into 6.1-rc1"

* tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
  test_kprobes: fix implicit declaration error of test_kprobes
  nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
  mm/cgroup/reclaim: fix dirty pages throttling on cgroup v1
  mm: fix unexpected changes to {failslab|fail_page_alloc}.attr
  swapfile: fix soft lockup in scan_swap_map_slots
  hugetlb: fix __prep_compound_gigantic_page page flag setting
  kfence: fix stack trace pruning
  proc/meminfo: fix spacing in SecPageTables
  mm: multi-gen LRU: retry folios written back while isolated
  mailmap: update email address for Satya Priya
  mm/migrate_device: return number of migrating pages in args->cpages
  kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible
  MAINTAINERS: update Alex Hung's email address
  mailmap: update Alex Hung's email address
  mm: mmap: fix documentation for vma_mas_szero
  mm/damon/sysfs-schemes: skip stats update if the scheme directory is removed
  mm/memory: return vm_fault_t result from migrate_to_ram() callback
  mm: correctly charge compressed memory to its memcg
  ipc/shm: call underlying open/close vm_ops
  gcov: clang: fix the buffer overflow issue
  ...

Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs

Pull vfs fixes from Al Viro:
"A couple of fixes, one of them for this cycle regression..."

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: vfs_tmpfile: ensure O_EXCL flag is enforced
fs: use acquire ordering in __fget_light()

io_uring: clear TIF_NOTIFY_SIGNAL if set and task_work not available

With how task_work is added and signaled, we can have TIF_NOTIFY_SIGNAL
set and no task_work pending as it got run in a previous loop. Treat
TIF_NOTIFY_SIGNAL like get_signal(), always clear it if set regardless
of whether or not task_work is pending to run.

Cc: stable@vger.kernel.org
Fixes: 46a525e199e4 ("io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'sound-6.1-rc7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A few more last-minute fixes for 6.1 that have been gathered in the
  last week; nothing looks too worrisome, mostly device-specific small
  fixes, including the ABI fix for ASoC SOF"

* tag 'sound-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: soc-pcm: Add NULL check in BE reparenting
  ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event
  ASoC: SOF: dai: move AMD_HS to end of list to restore backwards-compatibility
  ASoC: max98373: Add checks for devm_kcalloc
  ASoC: rt711-sdca: fix the latency time of clock stop prepare state machine transitions
  ASoC: soc-pcm: Don't zero TDM masks in __soc_pcm_open()
  ASoC: sgtl5000: Reset the CHIP_CLK_CTRL reg on remove
  ASoC: hdac_hda: fix hda pcm buffer overflow issue
  ASoC: stm32: i2s: remove irqf_oneshot flag
  ASoC: wm8962: Wait for updated value of WM8962_CLOCKING1 register