drm/i915: Only reschedule the submission tasklet if preemption is possible

If we couple the scheduler more tightly with the execlists policy, we
can apply the preemption policy to the question of whether we need to
kick the tasklet at all for this priority bump.

v2: Rephrase it as a core i915 policy and not an execlists foible.
v3: Pull the kick together.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507122544.12698-1-chris@chris-wilson.co.uk

drm/i915: Stop spinning for DROP_IDLE (debugfs/i915_drop_caches)

If the user is racing a call to debugfs/i915_drop_caches with ongoing
submission from another thread/process, we may never end up idling the
GPU and be uninterruptibly spinning in debugfs/i915_drop_caches trying
to catch an idle moment.

Just flush the work once, that should be enough to park the system under
correct conditions. Outside of those we either have a driver bug or the
user is racing themselves. Sadly, because the user may be provoking the
unwanted situation we can't put a warn here to attract attention to a
probable bug.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-4-chris@chris-wilson.co.uk

drm/i915: Cancel retire_worker on parking

Replace the racy continuation check within retire_work with a definite
kill-switch on idling. The race was being exposed by gem_concurrent_blit
where the retire_worker would be terminated too early leaving us
spinning in debugfs/i915_drop_caches with nothing flushing the
retirement queue.

Although that the igt is trying to idle from one child while submitting
from another may be a contributing factor as to why  it runs so slowly...

v2: Use the non-sync version of cancel_delayed_work(), we only need to
stop it from being scheduled as we independently check whether now is
the right time to be parking.

Testcase: igt/gem_concurrent_blit
Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-3-chris@chris-wilson.co.uk

drm/i915: Remove delay for idle_work

The original intent for the delay before running the idle_work was to
provide a hysteresis to avoid ping-ponging the device runtime-pm. Since
then we have also pulled in some memory management and general device
management for parking. But with the inversion of the wakeref handling,
GEM is no longer responsible for the wakeref and by the time we call the
idle_work, the device is asleep. It seems appropriate now to drop the
delay and just run the worker immediately to flush the cached GEM state
before sleeping.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-2-chris@chris-wilson.co.uk

drm/i915: Flush the switch-to-kernel-context harder for DROP_IDLE

To complete the idle worker, we must complete 2 passes of wait-for-idle.
At the end of the first pass, we queue a switch-to-kernel-context and
may only idle after waiting for its completion. Speed up the flush_work
by doing the wait explicitly, which then allows us to remove the
unbounded loop trying to complete the flush_work in the next patch.

References: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Testcase: igt/gem_ppgtt/flind-and-close-vma-leak
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-1-chris@chris-wilson.co.uk

drm/i915/icl: Set GCP_COLOR_INDICATION only for 10/12 bit deep color

v2: Fix commit msg to reflect why issue occurs(Jani)
Set GCP_COLOR_INDICATION only when we set 10/12 bit deep color.

Changing settings from 10/12 bit deep color to 8 bit(& vice versa)
doesn't work correctly using xrandr max bpc property. When we
connect a monitor which supports deep color, the highest deep color
setting is selected; which sets GCP_COLOR_INDICATION. When we change
the setting to 8 bit color, we still set GCP_COLOR_INDICATION which
doesn't allow the switch back to 8 bit color.

v3,4: Add comments & drop changes in intel_hdmi_compute_config(Ville)
Since HSW+, GCP_COLOR_INDICATION is not required for 8bpc.

Drop the changes in intel_hdmi_compute_config as desired_bpp
is needed to change values for pipe_bpp based on bw_constrained flag.

v5: Fix missing logical && in condition for setting GCP_COLOR_INDICATION.

v6: Fix comment formatting (Ville)

v7: Add reviewed by Ville

v8: Set GCP_COLOR_INDICATION based on spec:
For Gen 7.5 or later platforms, indicate color depth only for deep
color modes. Bspec: 8135,7751,50524

Pre DDI platforms, indicate color depth if deep color is supported
by sink. Bspec: 7854

Exception: CHERRYVIEW behaves like Pre DDI platforms.
Bspec: 15975

Check pipe_bpp is less than bpp * 3 in hdmi_deep_color_possible,
to not set 12 bit deep color for every modeset. This fixes the issue
where 12 bit color was selected even when user selected 10 bit.(Ville)

v9: Maintain a consistent behavior for all platforms and support
GCP_COLOR_INDICATION only when we are in deep color mode. Remove
hdmi_sink_is_deep_color() - no longer needed as checking pipe_bpp > 24
takes care of the deep color mode scenario.

Separate patch for fixing switch from 12 bit to 10 bit deep color
mode.

Co-developed-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429230811.9983-1-aditya.swarup@intel.com

drm/i915: Assert the local engine->wakeref is active

Due to the asynchronous tasklet and recursive GT wakeref, it may happen
that we submit to the engine (underneath it's own wakeref) prior to the
central wakeref being marked as taken. Switch to checking the local wakeref
for greater consistency.

Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503115225.30831-3-chris@chris-wilson.co.uk

drm/i915: Prefer checking the wakeref itself rather than the counter

The counter goes to zero at the start of the parking cycle, but the
wakeref itself is held until the end. Likewise, the counter becomes one
at the end of the unparking, but the wakeref is taken first. If we check
the wakeref instead of the counter, we include the unpark/unparking time
as intel_wakeref_is_active(), and do not spuriously declare inactive if
we fail to park (i.e. the parking and wakeref drop is postponed).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503115225.30831-2-chris@chris-wilson.co.uk

drm/i915: Assert breadcrumbs are correctly ordered in the signal handler

Inside the signal handler, we expect the requests to be ordered by their
breadcrumb such that no later request may be complete if we find an
earlier incomplete. Add an assert to check that the next breadcrumb
should not be logically before the current.

v2: Move the overhanging line into its own function and reuse it after
doing the insertion.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503152214.26517-1-chris@chris-wilson.co.uk

drm/i915: Acquire the signaler's timeline HWSP last

Acquiring the signaler's timeline takes an active reference to their
HWSP that we would like to avoid if possible, so take it after
performing all of our allocations required to set up the fencing. The
acquisition also provides the final check that the target has not
already signaled allowing us to avoid the semaphore at the last moment.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503140239.32668-1-chris@chris-wilson.co.uk

drm/i915: Move the hsw/bdw pc8 code to intel_runtime_pm.c

hsw_enable_pc8()/hsw_disable_pc8() are more less equivalent to
the display core init/unit functions of later platforms. Relocate
the hsw/bdw code into intel_runtime_pm.c so that it sits next to
its cousins.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503193143.28240-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Replace intel_ddi_pll_init()

intel_ddi_pll_init() is an anachronism. Rename it to
hsw_assert_cdclk() and move it to the power domain init code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503193143.28240-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Move w/a 0477/WaDisableIPC:skl into intel_init_ipc()

Move the w/a to disable IPC on SKL closer to the actual code
that implements IPS. Otherwise I just end up confused as to
what is excluding SKL from considerations.

IMO this makes more sense anyway since the hw does have the
feature, we're just not supposed to use it.

And this also makes us actually disable IPC in case eg. the
BIOS enabled it when it shouldn't have.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503173807.10834-3-ville.syrjala@linux.intel.com

drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl

Drop WaIncreaseLatencyIPCEnabled/Display w/a #1140 for
early cnl steppings.

v2: Drop the IS_GEN9_BC() change since other related
    parts of the code also use the KBL||CFL pattern

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503173807.10834-2-ville.syrjala@linux.intel.com

drm/i915: Document that we implement WaIncreaseLatencyIPCEnabled

Display w/a #1141 is also known as WaIncreaseLatencyIPCEnabled.
Add that to the comment.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503173807.10834-1-ville.syrjala@linux.intel.com

drm/i915: Disable semaphore busywaits on saturated systems

Asking the GPU to busywait on a memory address, perhaps not unexpectedly
in hindsight for a shared system, leads to bus contention that affects
CPU programs trying to concurrently access memory. This can manifest as
a drop in transcode throughput on highly over-saturated workloads.

The only clue offered by perf, is that the bus-cycles (perf stat -e
bus-cycles) jumped by 50% when enabling semaphores. This corresponds
with extra CPU active cycles being attributed to intel_idle's mwait.

This patch introduces a heuristic to try and detect when more than one
client is submitting to the GPU pushing it into an oversaturated state.
As we already keep track of when the semaphores are signaled, we can
inspect their state on submitting the busywait batch and if we planned
to use a semaphore but were too late, conclude that the GPU is
overloaded and not try to use semaphores in future requests. In
practice, this means we optimistically try to use semaphores for the
first frame of a transcode job split over multiple engines, and fail if
there are multiple clients active and continue not to use semaphores for
the subsequent frames in the sequence. Periodically, we try to
optimistically switch semaphores back on whenever the client waits to
catch up with the transcode results.

With 1 client, on Broxton J3455, with the relative fps normalized by %cpu:

x no semaphores
+ drm-tip
* patched
+------------------------------------------------------------------------+
|                                                    *                   |
|                                                    *+                  |
|                                                    **+                 |
|                                                    **+  x              |
|                                x               *  +**+  x              |
|                                x  x       *    *  +***x xx             |
|                                x  x       *    * *+***x *x             |
|                                x  x*   +  *    * *****x *x x           |
|                         +    x xx+x*   + ***   * ********* x   *       |
|                         +    x xx+x*   * *** +** ********* xx  *       |
|    *   +         ++++*  +    x*x****+*+* ***+*************+x*  *       |
|*+ +** *+ + +* + *++****** *xxx**********x***+*****************+*++    *|
|                                   |__________A_____M_____|             |
|                           |_______________A____M_________|             |
|                                 |____________A___M________|            |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 120       2.60475       3.50941       3.31123     3.2143953    0.21117399
+ 120        2.3826       3.57077       3.25101     3.1414161    0.28146407
Difference at 95.0% confidence
-0.0729792 +/- 0.0629585
-2.27039% +/- 1.95864%
(Student's t, pooled s = 0.248814)
* 120       2.35536       3.66713        3.2849     3.2059917    0.24618565
No difference proven at 95.0% confidence

With 10 clients over-saturating the pipeline:

x no semaphores
+ drm-tip
* patched
+------------------------------------------------------------------------+
|                     ++                                        **       |
|                     ++                                        **       |
|                     ++                                        **       |
|                     ++                                        **       |
|                     ++                                    xx ***       |
|                     ++                                    xx ***       |
|                     ++                                    xxx***       |
|                     ++                                    xxx***       |
|                    +++                                    xxx***       |
|                    +++                                    xx****       |
|                    +++                                    xx****       |
|                    +++                                    xx****       |
|                    +++                                    xx****       |
|                    ++++                                   xx****       |
|                   +++++                                   xx****       |
|                   +++++                                 x x******      |
|                  ++++++                                 xxx*******     |
|                  ++++++                                 xxx*******     |
|                  ++++++                                 xxx*******     |
|                  ++++++                                 xx********     |
|                  ++++++                               xxxx********     |
|                  ++++++                               xxxx********     |
|                ++++++++                             xxxxx*********     |
|+ +  +        + ++++++++                           xxx*xx**********x*  *|
|                                                         |__A__|        |
|                 |__AM__|                                               |
|                                                            |__A_|      |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 120       2.47855        2.8972       2.72376     2.7193402   0.074604933
+ 120       1.17367       1.77459       1.71977     1.6966782   0.085850697
Difference at 95.0% confidence
-1.02266 +/- 0.0203502
-37.607% +/- 0.748352%
(Student's t, pooled s = 0.0804246)
* 120       2.57868       3.00821       2.80142     2.7923878   0.058646477
Difference at 95.0% confidence
0.0730476 +/- 0.0169791
2.68622% +/- 0.624383%
(Student's t, pooled s = 0.0671018)

Indicating that we've recovered the regression from enabling semaphores
on this saturated setup, with a hint towards an overall improvement.

Very similar, but of smaller magnitude, results are observed on both
Skylake(gt2) and Kabylake(gt4). This may be due to the reduced impact of
bus-cycles, where we see a 50% hit on Broxton, it is only 10% on the big
core, in this particular test.

One observation to make here is that for a greedy client trying to
maximise its own throughput, using semaphores is the right choice. It is
only the holistic system-wide view that semaphores of one client
impacts another and reduces the overall throughput where we would choose
to disable semaphores.

The most noticeable negactive impact this has is on the no-op
microbenchmarks, which are also very notable for having no cpu bus load.
In particular, this increases the runtime and energy consumption of
gem_exec_whisper.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190504070707.30902-1-chris@chris-wilson.co.uk

drm/i915: Use mul_u32_u32() more

We have a lot of '(u64)foo * bar' everywhere. Replace with
mul_u32_u32() to avoid gcc failing to use a regular 32x32->64
multiply for this.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408152702.4153-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Allow ICL pipe "HDR mode" when the cursor is visible

Turns out the cursor is compatible with the pipe "HDR mode". It's
only the actual SDR planes that get entirely bypassed during
blending. So let's ignore the cursor when checking if we have
any planes active that aren't HDR compatible. This fixes the
regressions in the kms_cursor_crc and kms_plane_cursor tests.

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110579
Fixes: 09b25812db10 ("drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502200607.14504-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Move the PIPEMISC write the correct place

I fumbled the PIPEMISC write into the wrong place. It only gets
called for fastsets, but since value needs to be updated based on
the set of active planes it needs to be done for all plane updates.
Move it to the correct spot.

The symptoms include SDR planes never showing up if a previous
modeset/fastset left the pipe in HDR mode. This was immediately
obvious when running the kms_plane pixel format tests. Unfortunately
the test didn't realize it was scanning out pure black all the time
and declared success anyway.

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Fixes: 09b25812db10 ("drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502200607.14504-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Delay semaphore submission until the start of the signaler

Currently we submit the semaphore busywait as soon as the signaler is
submitted to HW. However, we may submit the signaler as the tail of a
batch of requests, and even not as the first context in the HW list,
i.e. the busywait may start spinning far in advance of the signaler even
starting.

If we wait until the request before the signaler is completed before
submitting the busywait, we prevent the busywait from starting too
early, if the signaler is not first in submission port.

To handle the case where the signaler is at the start of the second (or
later) submission port, we will need to delay the execution callback
until we know the context is promoted to port0. A challenge for later.

Fixes: e88619646971 ("drm/i915: Use HW semaphores for inter-engine synchroni
sation on gen8+")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-9-chris@chris-wilson.co.uk

drm/i915/hangcheck: Track context changes

Given sufficient preemption, we may see a busy system that doesn't
advance seqno while performing work across multiple contexts, and given
sufficient pathology not even notice a change in ACTHD. What does change
between the preempting contexts is their RING, so take note of that and
treat a change in the ring address as being an indication of forward
progress.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-1-chris@chris-wilson.co.uk

drm/i915: Leave engine parking to the engines

Drop the check in GEM parking that the engines were already parked. The
intention here was that before we dropped the GT wakeref, we were sure
that no more interrupts could be raised -- however, we have already
dropped the wakeref by this point and the warning is no longer valid.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502150024.16636-2-chris@chris-wilson.co.uk

drm/i915/execlists: Flush the tasklet on parking

Tidy up the cleanup sequence by always ensure that the tasklet is
flushed on parking (before we cleanup). The parking provides a
convenient point to ensure that the backend is truly idle.

v2: Do the full check for idleness before parking, to be sure we flush
any residual interrupt.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503080942.30151-1-chris@chris-wilson.co.uk

drm/i915/guc: Fix runtime suspend

We are not allowed to rpm_get() inside the runtime-suspend callback, so
split the intel_uc_suspend() into the core that assumes the caller holds
the wakeref (intel_uc_runtime_suspend), and one that acquires the wakeref
as necessary (intel_uc_suspend).

Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502203009.15727-1-chris@chris-wilson.co.uk

drm/i915: extract intel_gmbus.h from i915_drv.h and rename intel_i2c.c

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

While at it, rename intel_i2c.c to intel_gmbus.c and the functions to
intel_gmbus_*.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5834b8fbbfd4ac2e3d0159e69c87f6926066f537.1556809195.git.jani.nikula@intel.com

drm/i915: move more generic utils to i915_utils.h

Reduce clutter from i915_drv.h and intel_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8c197872384fc35442b738c21ba0da9336e02a85.1556809195.git.jani.nikula@intel.com

drm/i915: make i915_utils.h self-contained

And ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/69bcebefa6d8689d4a962394b0c6db04904354ed.1556809195.git.jani.nikula@intel.com

drm/i915: move i915_vgacntrl_reg() where needed

Reduce clutter from i915_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d30a79d008b875f708f5acf7924f9ca8ab06b575.1556809195.git.jani.nikula@intel.com

drm/i915: extract i915_debugfs.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2843b028d65e118dc40316aa84bf620a93f6c67b.1556809195.git.jani.nikula@intel.com

drm/i915: extract intel_acpi.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9bc1317a67df0b9d019eca5b36f474b76a1cad26.1556809195.git.jani.nikula@intel.com

drm/i915: extract intel_lpe_audio.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9101a58b9f10bcf11332175e17b6e6e45f4ebd17.1556809195.git.jani.nikula@intel.com

drm/i915: extract intel_dpio_phy.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/876a1671a84c6839bcafdf276cf9c4e1da6c631c.1556809195.git.jani.nikula@intel.com

drm/i915/csr: move CSR version macros to intel_csr.h

Reduce clutter from i915_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8222df3f559b056387b5c7e6e04a878cbf8b4e2e.1556809195.git.jani.nikula@intel.com

drm/i915: remove unused/stale macros and comments from intel_drv.h

Reduce clutter from intel_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/963ba7fa0111135c3e796bfc9f86d6e33724758e.1556809195.git.jani.nikula@intel.com

drm/i915: move ranges to intel_display.c

Reduce clutter from intel_drv.h with the minimal change.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2c9248b50e620e95d85b8b9252d020a547c9474a.1556809195.git.jani.nikula@intel.com

drm/i915/dsi: move operation mode types to intel_dsi.h

Reduce clutter from intel_drv.h with the minimal change.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72de677e844220d8522a836aae206c278ea45284.1556809195.git.jani.nikula@intel.com

drm/i915/dvo: move DVO chip types to intel_dvo.c

Reduce clutter from intel_drv.h with the minimal change.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/95203dbf844061da95f33614d0cb61533a11fdd4.1556809195.git.jani.nikula@intel.com

drm/i915: add single combo phy init/unit functions

Work on the principle that files should prefer not to expose platform
specific functions.

v2, v3: Rebase

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502145234.7002-1-jani.nikula@intel.com

drm/i915: Tune down WARN about incorrect VBT TC legacy flag

Looks like VBT contains again the wrong information about a port's TypeC
legacy vs. DP-alt/TBT-alt type. There is no further issues after we
notice this and fix it up, so tune down the WARN to be a a DRM_ERROR.

This also avoids CI tainting the kernel and stopping the test run.

v2:
- Update also code coment accordingly. (Jani)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110578
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502101754.29219-1-imre.deak@intel.com

drm/i915: Include fence signaled bit in print_request()

Show the fence flags view of request completion in addition to the
normal hwsp check and whether signaling is enabled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-2-chris@chris-wilson.co.uk

drm/i915/icl: Add missing combo PHY lane power setup

This step of the BSpec combo PHY port enabling is missing, so add it
now.

v2:
- Rebased on the new fixed v2 version of the helper.
v3:
- Use intel_ instead of icl_ prefix. (Jani)

Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425185253.3197-2-imre.deak@intel.com

drm/i915/icl: Factor out combo PHY lane power setup helper

Factor out the combo PHY lane power configuration code to a separate
helper; it will be also needed by the next patch adding the same
configuration for DDI ports.

Add support for DDI ports and lane reversal as preparation for the next
patch.

The PWR_DOWN_LN_1 value is unspecified in the BSpec register description
so remove it.

v2:
- Fix up the wrong assumption that the encodings are the same for DDI
  and DSI ports. (Jani)
v3:
- Use intel_ instead of icl_ prefix. (Jani)
- Add required headers to intel_combo_phy.h after the upstream header
  refactoring.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> (v2)
Link: https://patchwork.freedesktop.org/patch/msgid/20190425185253.3197-1-imre.deak@intel.com

drm/i915: hsw+ audio regs are per-transocder

s/pipe/transcoder/ when dealing with hsw+ audio registers. This
won't actually make any real difference since there is no audio
on the EDP transcoder. But this should avoid a bit of confusion
when cross checking against the spec.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430142901.7302-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Don't skip audio enable if ELD is bogus

We've already committed to enabling audio when intel_audio_codec_enable()
is called. We can't back out even if the ELD has turned sour in the
meantime. So just spew some debug log and plow ahead. Otherwise the
state checker gets unhappy when audio isn't enabled when it is
expected to be.

I suppose we really ought to precompute the ELD as well, but
let's just toss in a FIXME for the future.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103841
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430142901.7302-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/csr: alpha_support doesn't depend on csr or vice versa

Debug logging should not be dependent on alpha support flag.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429142253.15882-1-jani.nikula@intel.com

drm/i915: Corrupt DSI picture fix for GeminiLake

Currently due to regression CI machine displays show corrupt picture.
Problem is when CDCLK is as low as 79200, picture gets unstable, while
DSI and DE pll values were confirmed to be correct.  Limiting to 158400
as agreed with Ville.

We could not come up with any better solution yet, as PLL divider values
both for MIPI(DSI PLL) and CDCLK(DE PLL) are correct, however seems that
due to some boundary conditions, when clocking is too low we get wrong
timings for DSI display.  Similar workaround exists for VLV though, so
just took similar condition into use. At least that way GLK platform
will start to be usable again, with current drm-tip.

v2: Fixed commit subject as suggested.

v3: Added generic bugs(crc failures, screen not init
for GLK DSI which might be affected).

v4: Added references tag for bugs affected.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=109267
References: https://bugs.freedesktop.org/show_bug.cgi?id=103184
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430125119.7478-1-stanislav.lisovskiy@intel.com

drm/i915: Complete both freed-object passes before draining the workqueue

The workqueue code complains viciously if we try to queue more work onto
the queue while attampting to drain it. As we asynchronously free
objects and defer their enqueuing with RCU, it is quite tricky to
quiesce the system before attempting to drain the workqueue. Yet drain
we must to ensure that the worker is idle before unloading the module.

Give the freed object drain 3 whole passes with multiple rcu_barrier()
to give the defer freeing of several levels each protected by RCU and
needing a grace period before its parent can be freed, ultimately
resulting in a GEM object being freed after another RCU period.

A consequence is that it will make module unload even slower.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110550
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501135753.8711-1-chris@chris-wilson.co.uk

drm/i915: Move the engine->destroy() vfunc onto the engine

Make the engine responsible for cleaning itself up!

This removes the i915->gt.cleanup vfunc that has been annoying the
casual reader and myself for the last several years, and helps keep a
future patch to add more cleanup tidy.

v2: Assert that engine->destroy is set after the backend starts
allocating its own state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501103204.18632-1-chris@chris-wilson.co.uk

drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used

The pipe has a special HDR mode with higher precision when only
HDR planes are active. Let's use it.

Curiously this fixes the kms_color gamma/degamma tests when
using a HDR plane, which is always the case unless one hacks
the test to use an SDR plane. If one does hack the test to use
an SDR plane it does pass already.

I have no actual explanation how the output after the gamma
LUT can be different between the two modes. The way the tests
are written should mean that the output should be identical
between the solid color vs. the gradient. But clearly that
somehow doesn't hold true for the HDR planes in non-HDR pipe
mode. Anyways, as long as we stick to one type of plane the
test should produce sensible results now.

v2: s/HDR_MODE/HDR_MODE_PRECISION/ (Shashank)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412183009.8237-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>

drm/i915: Flatten and rename haswell_set_pipemisc()

Move the platform checks out from haswell_set_pipemisc() and
rename it to bdw_set_pipemisc() to make it clear when to call it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412183009.8237-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Wait for the struct_mutex on idling

When the system is idling, contention for struct_mutex should be low and
so we will be more efficient to wait for a contended mutex than
reschedule.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430094405.6127-1-chris@chris-wilson.co.uk

drm/i915: extract intel_combo_phy.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6aea17072684dec0b04b6831c0c0e5a134edf87e.1556540890.git.jani.nikula@intel.com

drm/i915: move some leftovers to intel_pm.h from i915_drv.h

Commit 696173b064c6 ("drm/i915: extract intel_pm.h from intel_drv.h")
missed the declarations in i915_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/770f5f1c2dd99e4d6a314b70184e71b928a6d362.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_runtime_pm.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87904259868782c1ad664d852b27a50c1597cfaa.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_atomic.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

v2: fix sparse warnings on undeclared global functions

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429125331.32499-1-jani.nikula@intel.com

drm/i915: extract intel_dsi_dcs_backlight.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f35fc2ba76d7dd5886d304ad690a6f9078a56ecd.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_dp_mst.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b2fd1b2b968aa0ce010d17e2811bc275cf9ca251.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_vdsc.h from intel_drv.h and i915_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/76d2719b462004ec6f6f5c302ee5d3876357c599.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_overlay.h from intel_drv.h and i915_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e4fb1e67ed38870df3040bb0a1b1a58fd90cc86.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_quirks.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e2fb90dcce2063b1c464dc64aa8fa6005b62bc6.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_bios.h functions from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the header remains self-contained, and do so with minimal further
includes, using forward declarations as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf9b17d56489e15d82356575037432ad04712475.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_hotplug.h from intel_drv.h and i915_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

v2: fix sparse warnings on undeclared global functions

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429125011.10876-1-jani.nikula@intel.com

drm/i915: extract i915_irq.h from intel_drv.h and i915_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64e46278dc8dccc9c548ef453cb2ceece5367bb2.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_dp_aux_backlight.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e5a386cbdcd361399e94c55d47a12352a5216c7.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_dp_link_training.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eb23be64d04957b2cf82b79fd69cc57ed84043a4.1556540889.git.jani.nikula@intel.com

drm/i915: extract intel_fifo_underrun.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0507c5523d1f07a48e6679a04db75246ce8ba766.1556540889.git.jani.nikula@intel.com

drm/i915: move dsi init functions to intel_dsi.h

Keep the header self-contained. It'll need rework of its own in the
future, but gotta start somewhere.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/158347ef715a35ca1f7d945efb139d80bf5e0e6c.1556540889.git.jani.nikula@intel.com

drm/i915: make intel_dpll_mgr.h self-contained

And ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8e759b36dee10c20aa06e4d34d36cda6a2a02323.1556540889.git.jani.nikula@intel.com

drm/i915/dvo: rename dvo.h to intel_dvo_dev.h and make self-contained

Put the header more in line with the rest. No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9f4dc21928f9cccd7a3593a2f9faa44b4412ff33.1556540889.git.jani.nikula@intel.com

drm/i915: make intel_bios.h self-contained

Just a types include required.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/15b8dea022bd80198f91c59f8ad793ebd8fc04f0.1556540889.git.jani.nikula@intel.com

drm/i915: ensure more headers remain self-contained

Add more headers to the header test list:

* i915_drv.h
* i915_params.h
* i915_reg.h
* intel_drv.h
* intel_uncore.h

Happily they already are self-contained, but keep them that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f660e7e1258b81d50475fa73f610eb3312c83424.1556540889.git.jani.nikula@intel.com

drm/i915: do not mix workaround with normal flow

Separate the two comments: one is a workaround and the other is a sanity
check. We could just compare != 1, but let's treat them differently due
to having different meaning.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404230426.15837-4-lucas.demarchi@intel.com

drm/i915: reorder if chain to have last gen first

Reorder if/else so we check for gen >= 11 first, similar to most of
other checks in the driver.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404230426.15837-3-lucas.demarchi@intel.com

drm/i915/icl: fix step numbers in icl_display_core_init()

At some point the spec was changed and we never updated the numbers to
match it. Let's try once more to keep them in sync.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404230426.15837-2-lucas.demarchi@intel.com

drm/i915/icl: Whitelist GEN9_SLICE_COMMON_ECO_CHICKEN1

WaEnableStateCacheRedirectToCS context workaround configures the L3 cache
to benefit 3d workloads but media has different requirements.

Remove the workaround and whitelist the register to allow any userspace
configure the behaviour to their liking.

v2:
 * Remove the workaround apart from adding the whitelist.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: kevin.ma@intel.com
Cc: xiaogang.li@intel.com
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418100634.984-1-tvrtko.ursulin@linux.intel.com
Fixes: f63c7b4880aa ("drm/i915/icl: WaEnableStateCacheRedirectToCS")
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[tursulin: Anuj reported no GPU hangs or performance regressions with old
 Mesa on patched kernel.]

drm/i915: Skip unused contexts for context_barrier_task()

If the context has not been used yet, it needs no barrier, and in the
process fix up the selftest in mock_contexts.

Testcase: igt/gem_ctx_clone/vm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429090735.326-1-chris@chris-wilson.co.uk

drm/i915: Move i915_request_alloc into selftests/

Having transitioned GEM over to using intel_context as its primary means
of tracking the GEM context and engine combined and using
i915_request_create(), we can move the older i915_request_alloc()
helper function into selftests/ where the remaining users are confined.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-9-chris@chris-wilson.co.uk

drm/i915: Remove intel_context.active_link

We no longer need to track the active intel_contexts within each engine,
allowing us to drop a tricky mutex_lock from inside unpin (which may
occur inside fs_reclaim).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-8-chris@chris-wilson.co.uk

drm/i915: Switch back to an array of logical per-engine HW contexts

We switched to a tree of per-engine HW context to accommodate the
introduction of virtual engines. However, we plan to also support
multiple instances of the same engine within the GEM context, defeating
our use of the engine as a key to looking up the HW context. Just
allocate a logical per-engine instance and always use an index into the
ctx->engines[]. Later on, this ctx->engines[] may be replaced by a user
specified map.

v2: Add for_each_gem_engine() helper to iterator within the engines lock
v3: intel_context_create_request() helper
v4: s/unsigned long/unsigned int/ 4 billion engines is quite enough.
v5: Push iterator locking to caller

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-7-chris@chris-wilson.co.uk

drm/i915: Split engine setup/init into two phases

In the next patch, we require the engine vfuncs setup prior to
initialising the pinned kernel contexts, so split the vfunc setup from
the engine initialisation and call it earlier.

v2: s/setup_xcs/setup_common/ for intel_ring_submission_setup()

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-6-chris@chris-wilson.co.uk

drm/i915: Pass intel_context to intel_context_pin_lock()

Move the intel_context_instance() to the caller so that we can decouple
ourselves from one context instance per engine.

v2: Rename pin_lock() to lock_pinned(), hopefully that is clearer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-5-chris@chris-wilson.co.uk

drm/i915/selftests: Pass around intel_context for sseu

Combine the (i915_gem_context, intel_engine) into a single parameter,
the intel_context for convenience and later simplification.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-4-chris@chris-wilson.co.uk

drm/i915/selftests: Use the real kernel context for sseu isolation tests

Simply the setup slightly for the sseu selftests to use the actual
kernel_context.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-3-chris@chris-wilson.co.uk

drm/i915: Export intel_context_instance()

We want to pass in a intel_context into intel_context_pin() and that
requires us to first be able to lookup the intel_context!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-2-chris@chris-wilson.co.uk

drm/i915/gvt: Pin the per-engine GVT shadow contexts

Our eventual goal is to rid request construction of struct_mutex, with
the short term step of lifting the struct_mutex requirements into the
higher levels (i.e. the caller must ensure that the context is already
pinned into the GTT). In this patch, we pin GVT's shadow context upon
allocation and so keep them pinned into the GGTT for as long as the
virtual machine is alive, and so we can use the simpler request
construction path safe in the knowledge that the hard work is already
done.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-1-chris@chris-wilson.co.uk

Merge drm/drm-next into drm-intel-next-queued

Get gvt-fixes back to dinq.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Clean up cherryview_load_luts()

I like my functions simple, so split up the low level bits from
cherryview_load_luts() into separate functions. Also rename the
whole thing to chv_load_luts() to match the new world order.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408121815.30142-1-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>

drm/i915: Fix ICL output CSC programming

When I refactored the code into its own function I accidentally
misplaced the <<16 shifts for some of the registers causing us
to lose the blue channel entirely.

We should really find a way to test this...

Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: d2c19b06d6ea ("drm/i915: Clean up ilk/icl pipe/output CSC programming")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425192419.24931-1-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>

drm/i915: Enable render context support for gen4 (Broadwater to Cantiga)

Broadwater and the rest of gen4  do support being able to saving and
reloading context specific registers between contexts, providing isolation
of the basic GPU state (as programmable by userspace). This allows
userspace to assume that the GPU retains their state from one batch to the
next, minimising the amount of state it needs to reload and manually save
across batches.

v2: CONSTANT_BUFFER woes

Running through piglit turned up an interesting issue, a GPU hang inside
the context load. The context image includes the CONSTANT_BUFFER command
that loads an address into a on-gpu buffer, and the context load was
executing that immediately. However, since it was reading from the GTT
there is no guarantee that the GTT retains the same configuration as
when the context was saved, resulting in stray reads and a GPU hang.

Having tried issuing a CONSTANT_BUFFER (to disable the command) from the
ring before saving the context to no avail, we resort to patching out
the instruction inside the context image before loading.

This does impose that gen4 always reissues CONSTANT_BUFFER commands on
each batch, but due to the use of a shared GTT that was and will remain
a requirement.

v3: ECOSKPD to the rescue

Ville found the magic bit in the ECOSKPD to disable saving and restoring
the CONSTANT_BUFFER from the context image, thereby completely avoiding
the GPU hangs from chasing invalid pointers. This appears to be the
default behaviour for gen5, and so we just need to tweak gen4 to match.

v4: Fix spelling of ECOSKPD and discover it already exists

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419172720.5462-1-chris@chris-wilson.co.uk

drm/i915: Enable render context support for Ironlake (gen5)

Ironlake does support being able to saving and reloading context specific
registers between contexts, providing isolation of the basic GPU state
(as programmable by userspace). This allows userspace to assume that the
GPU retains their state from one batch to the next, minimising the
amount of state it needs to reload, or manually save and restore.

v2: Fix off-by-one in reading CXT_SIZE, and add a comment that the
CXT_SIZE and context-layout do not match in bspec, but the difference is
irrelevant as we overallocate the full page anyway (Ville).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419111749.3910-2-chris@chris-wilson.co.uk

drm/i915/ringbuffer: EMIT_INVALIDATE *before* switch context

Despite what I think the prm recommends, commit f2253bd9859b
("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context") turned out
to be a huge mistake when enabling Ironlake contexts as the GPU would
hang on either a MI_FLUSH or PIPE_CONTROL immediately following the
MI_SET_CONTEXT of an active mesa context (more vanilla contexts, e.g.
simple rendercopies with igt, do not suffer).

Ville found the following clue,

  "[DevCTG+]: For the invalidate operation of the pipe control, the
   following pointers are affected. The
   invalidate operation affects the restore of these packets. If the pipe
   control invalidate operation is completed
   before the context save, the indirect pointers will not be restored from
   memory.
   1. Pipeline State Pointer
   2. Media State Pointer
   3. Constant Buffer Packet"

which suggests by us emitting the INVALIDATE prior to the MI_SET_CONTEXT,
we prevent the context-restore from chasing the dangling pointers within
the image, and explains why this likely prevents the GPU hang.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419111749.3910-1-chris@chris-wilson.co.uk

drm/i915: Move sandybride pcode access to intel_sideband.c

sandybride_pcode is another sideband, so move it to their new home.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426081725.31217-8-chris@chris-wilson.co.uk

drm/i915: Merge sandybridge_pcode_(read|write)

These routines are identical except in the nature of the value parameter.
For writes it is a pure in-param, but for a read, we need an out-param.
Since they differ in a single line, merge the two routines into one.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426081725.31217-7-chris@chris-wilson.co.uk

drm/i915: Merge sbi read/write into a single accessor

Since intel_sideband_read and intel_sideband_write differ by only a
couple of lines (depending on whether we feed the value in or out),
merge the two into a single common accessor.

v2: Restore vlv_flisdsi_read() lost during rebasing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426081725.31217-6-chris@chris-wilson.co.uk

drm/i915: Separate sideband declarations to intel_sideband.h

Split the sideback declarations out of the ginormous i915_drv.h

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426081725.31217-5-chris@chris-wilson.co.uk

drm/i915: Replace pcu_lock with sb_lock

We now have two locks for sideband access. The general one covering
sideband access across all generation, sb_lock, and a specific one
covering sideband access via the punit on vlv/chv. After lifting the
sb_lock around the punit into the callers, the pcu_lock is now redudant
and can be separated from its other use to regulate RPS (essentially
giving RPS a lock all of its own).

v2: Extract a couple of minor bug fixes.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426081725.31217-4-chris@chris-wilson.co.uk

drm/i915: Lift sideband locking for vlv_punit_(read|write)

Lift the sideband acquisition for vlv_punit_read and vlv_punit_write
into their callers, so that we can lock the sideband once for a sequence
of operations, rather than perform the heavyweight acquisition on each
request.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426081725.31217-3-chris@chris-wilson.co.uk

drm/i915: Lift acquiring the vlv punit magic to a common sb-get

As we now employ a very heavy pm_qos around the punit access, we want to
minimise the number of synchronous requests by performing one for the
whole punit sequence rather than around individual accesses. The
sideband lock is used for this, so push the pm_qos into the sideband
lock acquisition and release, moving it from the lowlevel punit rw
routine to the callers. In the first step, we move the punit magic into
the common sideband lock so that we can acquire a bunch of ports
simultaneously, and if need be extend the workaround protection later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426081725.31217-2-chris@chris-wilson.co.uk

drm/i915: Disable preemption and sleeping while using the punit sideband

While we talk to the punit over its sideband, we need to prevent the cpu
from sleeping in order to prevent a potential machine hang.

Note that by itself, it appears that pm_qos_update_request (via
intel_idle) doesn't provide a sufficient barrier to ensure that all core
are indeed awake (out of Cstate) and that the package is awake. To do so,
we need to supplement the pm_qos with a manual ping on_each_cpu.

v2: Restrict the heavy-weight wakeup to just the ISOF_PORT_PUNIT, there
is insufficient evidence to implicate a wider problem atm. Similarly,
restrict the w/a to Valleyview, as Cherryview doesn't have an angry cadre
of users.

The working theory, courtesy of Ville and Hans, is the issue lies within
the power delivery and so is likely to be unit and board specific and
occurs when both the unit/fw require extra power at the same time as the
cpu package is changing its own power state.

References: https://bugzilla.kernel.org/show_bug.cgi?id=109051
References: https://bugs.freedesktop.org/show_bug.cgi?id=102657
References: https://bugzilla.kernel.org/show_bug.cgi?id=195255
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426081725.31217-1-chris@chris-wilson.co.uk

Merge tag 'drm-intel-next-fixes-2019-04-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Use after free fix during GEM_CREATE when reporting back object size
- Icelake DP register programming order fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425061312.GA2919@jlahtine-desk.ger.corp.intel.com