platform/kernel/linux-amlogic.git
11 years agomm/writeback: don't check force_wait to handle bdi->work_list
Wanpeng Li [Mon, 8 Jul 2013 23:00:14 +0000 (16:00 -0700)]
mm/writeback: don't check force_wait to handle bdi->work_list

After commit 839a8e8660b6 ("writeback: replace custom worker pool
implementation with unbound workqueue"), bdi_writeback_workfn runs off
bdi_writeback->dwork, on each execution, it processes bdi->work_list and
reschedules if there are more things to do instead of flush any work
that race with us existing.  It is unecessary to check force_wait in
wb_do_writeback since it is always 0 after the mentioned commit.  This
patch remove the force_wait in wb_do_writeback.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/writeback: remove wb_reason_name
Wanpeng Li [Mon, 8 Jul 2013 23:00:12 +0000 (16:00 -0700)]
mm/writeback: remove wb_reason_name

wb_reason_name is not used any more - remove it.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agofs/fs-writeback.c: : make wb_do_writeback() as static
Haicheng Li [Mon, 8 Jul 2013 23:00:11 +0000 (16:00 -0700)]
fs/fs-writeback.c: : make wb_do_writeback() as static

It's not used globally and could be static.

Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/sparse.c: put clear_hwpoisoned_pages within CONFIG_MEMORY_HOTREMOVE
Zhang Yanfei [Mon, 8 Jul 2013 23:00:10 +0000 (16:00 -0700)]
mm/sparse.c: put clear_hwpoisoned_pages within CONFIG_MEMORY_HOTREMOVE

With CONFIG_MEMORY_HOTREMOVE unset, there is a compile warning:

  mm/sparse.c:755: warning: `clear_hwpoisoned_pages' defined but not used

And Bisecting it ended up pointing to 4edd7ceff ("mm, hotplug: avoid
compiling memory hotremove functions when disabled").

This is because the commit above put sparse_remove_one_section() within
the protection of CONFIG_MEMORY_HOTREMOVE but the only user of
clear_hwpoisoned_pages() is sparse_remove_one_section(), and it is not
within the protection of CONFIG_MEMORY_HOTREMOVE.

So put clear_hwpoisoned_pages within CONFIG_MEMORY_HOTREMOVE should fix
the warning.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm: remove unused __put_page()
Zhang Yanfei [Mon, 8 Jul 2013 23:00:09 +0000 (16:00 -0700)]
mm: remove unused __put_page()

This function is nowhere used, and it has a confusing name with put_page
in mm/swap.c.  So better to remove it.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agovfree: don't schedule free_work() if llist_add() returns false
Oleg Nesterov [Mon, 8 Jul 2013 23:00:08 +0000 (16:00 -0700)]
vfree: don't schedule free_work() if llist_add() returns false

vfree() only needs schedule_work(&p->wq) if p->list was empty, otherwise
vfree_deferred->wq is already pending or it is running and didn't do
llist_del_all() yet.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/page_alloc.c: remove unlikely() from the current_order test
Zhang Yanfei [Mon, 8 Jul 2013 23:00:08 +0000 (16:00 -0700)]
mm/page_alloc.c: remove unlikely() from the current_order test

In __rmqueue_fallback(), current_order loops down from MAX_ORDER - 1 to
the order passed.  MAX_ORDER is typically 11 and pageblock_order is
typically 9 on x86.  Integer division truncates, so pageblock_order / 2
is 4.  For the first eight iterations, it's guaranteed that
current_order >= pageblock_order / 2 if it even gets that far!

So just remove the unlikely(), it's completely bogus.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm: remove unused functions is_{normal_idx, normal, dma32, dma}
Zhang Yanfei [Mon, 8 Jul 2013 23:00:07 +0000 (16:00 -0700)]
mm: remove unused functions is_{normal_idx, normal, dma32, dma}

These functions are nowhere used, so remove them.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/page_alloc.c: remove zone_type argument of build_zonelists_node
Zhang Yanfei [Mon, 8 Jul 2013 23:00:06 +0000 (16:00 -0700)]
mm/page_alloc.c: remove zone_type argument of build_zonelists_node

The callers of build_zonelists_node always pass MAX_NR_ZONES -1 as the
zone_type argument, so we can directly use the value in
build_zonelists_node and remove zone_type argument.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMAINTAINERS: add zswap and zbud maintainer
Seth Jennings [Mon, 8 Jul 2013 23:00:05 +0000 (16:00 -0700)]
MAINTAINERS: add zswap and zbud maintainer

Add maintainer information for zswap and zbud into the MAINTAINERS file.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoinclude/linux/gfp.h: fix the comment for GFP_ZONE_TABLE
Zhang Yanfei [Mon, 8 Jul 2013 23:00:02 +0000 (16:00 -0700)]
include/linux/gfp.h: fix the comment for GFP_ZONE_TABLE

0xc just means MOVABLE + DMA32, which results in zone DMA32.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemcg: do not account memory used for cache creation
Glauber Costa [Mon, 8 Jul 2013 23:00:01 +0000 (16:00 -0700)]
memcg: do not account memory used for cache creation

The memory we used to hold the memcg arrays is currently accounted to
the current memcg.  But that creates a problem, because that memory can
only be freed after the last user is gone.  Our only way to know which
is the last user, is to hook up to freeing time, but the fact that we
still have some in flight kmallocs will prevent freeing to happen.  I
believe therefore to be just easier to account this memory as global
overhead.

Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemcg: also test for skip accounting at the page allocation level
Glauber Costa [Mon, 8 Jul 2013 23:00:00 +0000 (16:00 -0700)]
memcg: also test for skip accounting at the page allocation level

The memory we used to hold the memcg arrays is currently accounted to
the current memcg.  But that creates a problem, because that memory can
only be freed after the last user is gone.  Our only way to know which
is the last user, is to hook up to freeing time, but the fact that we
still have some in flight kmallocs will prevent freeing to happen.  I
believe therefore to be just easier to account this memory as global
overhead.

This patch (of 2):

Disabling accounting is only relevant for some specific memcg internal
allocations.  Therefore we would initially not have such check at
memcg_kmem_newpage_charge, since direct calls to the page allocator that
are marked with GFP_KMEMCG only happen outside memcg core.  We are
mostly concerned with cache allocations and by having this test at
memcg_kmem_get_cache we are already able to relay the allocation to the
root cache and bypass the memcg caches altogether.

There is one exception, though: the SLUB allocator does not create large
order caches, but rather service large kmallocs directly from the page
allocator.  Therefore, the following sequence, when backed by the SLUB
allocator:

memcg_stop_kmem_account();
kmalloc(<large_number>)
memcg_resume_kmem_account();

would effectively ignore the fact that we should skip accounting, since
it will drive us directly to this function without passing through the
cache selector memcg_kmem_get_cache.  Such large allocations are
extremely rare but can happen, for instance, for the cache arrays.

This was never a problem in practice, because we weren't skipping
accounting for the cache arrays.  All the allocations we were skipping
were fairly small.  However, the fact that we were not skipping those
allocations are a problem and can prevent the memcgs from going away.
As we fix that, we need to make sure that the fix will also work with
the SLUB allocator.

Signed-off-by: Glauber Costa <glommer@openvz.org>
Reported-by: Michal Hocko <mhocko@suze.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/vmalloc.c: check VM_UNINITIALIZED flag in s_show instead of show_numa_info
Zhang Yanfei [Mon, 8 Jul 2013 22:59:59 +0000 (15:59 -0700)]
mm/vmalloc.c: check VM_UNINITIALIZED flag in s_show instead of show_numa_info

We should check the VM_UNITIALIZED flag in s_show().  If this flag is
set, that said, the vm_struct is not fully initialized.  So it is
unnecessary to try to show the information contained in vm_struct.

We checked this flag in show_numa_info(), but I think it's better to
check it earlier.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/vmalloc.c: rename VM_UNLIST to VM_UNINITIALIZED
Zhang Yanfei [Mon, 8 Jul 2013 22:59:58 +0000 (15:59 -0700)]
mm/vmalloc.c: rename VM_UNLIST to VM_UNINITIALIZED

VM_UNLIST was used to indicate that the vm_struct is not listed in
vmlist.

But after commit 4341fa454796 ("mm, vmalloc: remove list management of
vmlist after initializing vmalloc"), the meaning of this flag changed.
It now means the vm_struct is not fully initialized.  So renaming it to
VM_UNINITIALIZED seems more reasonable.

Also change clear_vm_unlist to clear_vm_uninitialized_flag.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/vmalloc.c: emit the failure message before return
Zhang Yanfei [Mon, 8 Jul 2013 22:59:57 +0000 (15:59 -0700)]
mm/vmalloc.c: emit the failure message before return

Use goto to jump to the fail label to give a failure message before
returning NULL.  This makes the failure handling in this function
consistent.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/vmalloc.c: remove alloc_map from vmap_block
Zhang Yanfei [Mon, 8 Jul 2013 22:59:56 +0000 (15:59 -0700)]
mm/vmalloc.c: remove alloc_map from vmap_block

As we have removed the dead code in the vb_alloc, it seems there is no
place to use the alloc_map.  So there is no reason to maintain the
alloc_map in vmap_block.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/vmalloc.c: remove unused purge_fragmented_blocks_thiscpu
Zhang Yanfei [Mon, 8 Jul 2013 22:59:55 +0000 (15:59 -0700)]
mm/vmalloc.c: remove unused purge_fragmented_blocks_thiscpu

This function is nowhere used now, so remove it.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/vmalloc.c: remove dead code in vb_alloc
Zhang Yanfei [Mon, 8 Jul 2013 22:59:54 +0000 (15:59 -0700)]
mm/vmalloc.c: remove dead code in vb_alloc

Space in a vmap block that was once allocated is considered dirty and
not made available for allocation again before the whole block is
recycled.  The result is that free space within a vmap block is always
contiguous.

So if a vmap block has enough free space for allocation, the allocation
is impossible to fail.  Thus, the fragmented block purging was never
invoked from vb_alloc().  So remove this dead code.

[ Same patches also sent by:

    Chanho Min <chanho.min@lge.com>
    Johannes Weiner <hannes@cmpxchg.org>

  but git doesn't do "multiple authors" ]

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/vmalloc.c: unbreak __vunmap()
Dan Carpenter [Mon, 8 Jul 2013 22:59:53 +0000 (15:59 -0700)]
mm/vmalloc.c: unbreak __vunmap()

There is an extra semi-colon so the function always returns.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm: remove duplicated call of get_pfn_range_for_nid
Zhang Yanfei [Mon, 8 Jul 2013 22:59:52 +0000 (15:59 -0700)]
mm: remove duplicated call of get_pfn_range_for_nid

When calculating pages in a node, for each zone in that node, we will
have

  zone_spanned_pages_in_node
    --> get_pfn_range_for_nid
  zone_absent_pages_in_node
    --> get_pfn_range_for_nid

That is to say, we call the get_pfn_range_for_nid to get start_pfn and
end_pfn of the node for MAX_NR_ZONES * 2 times.  And this is totally
unnecessary if we call the get_pfn_range_for_nid before
zone_*_pages_in_node add two extra arguments node_start_pfn and
node_end_pfn for zone_*_pages_in_node, then we can remove the
get_pfn_range_in_node in zone_*_pages_in_node.

[akpm@linux-foundation.org: make definitions more readable]
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm: invoke oom-killer from remaining unconverted page fault handlers
Johannes Weiner [Mon, 8 Jul 2013 22:59:50 +0000 (15:59 -0700)]
mm: invoke oom-killer from remaining unconverted page fault handlers

A few remaining architectures directly kill the page faulting task in an
out of memory situation.  This is usually not a good idea since that
task might not even use a significant amount of memory and so may not be
the optimal victim to resolve the situation.

Since 2.6.29's 1c0fe6e ("mm: invoke oom-killer from page fault") there
is a hook that architecture page fault handlers are supposed to call to
invoke the OOM killer and let it pick the right task to kill.  Convert
the remaining architectures over to this hook.

To have the previous behavior of simply taking out the faulting task the
vm.oom_kill_allocating_task sysctl can be set to 1.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc bits]
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemcg: clean up memcg->nodeinfo
Johannes Weiner [Mon, 8 Jul 2013 22:59:49 +0000 (15:59 -0700)]
memcg: clean up memcg->nodeinfo

Remove struct mem_cgroup_lru_info and fold its single member, the
variably sized nodeinfo[0], directly into struct mem_cgroup.  This
should make it more obvious why it has to be the last member there.

Also move the comment that's above that special last member below it, so
it is more visible to somebody that considers appending to the struct
mem_cgroup.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm: mremap: validate input before taking lock
Rasmus Villemoes [Mon, 8 Jul 2013 22:59:48 +0000 (15:59 -0700)]
mm: mremap: validate input before taking lock

This patch is very similar to commit 84d96d897671 ("mm: madvise:
complete input validation before taking lock"): perform some basic
validation of the input to mremap() before taking the
&current->mm->mmap_sem lock.

This also makes the MREMAP_FIXED => MREMAP_MAYMOVE dependency slightly
more explicit.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/iommu/msm_iommu_dev.c: fix leak and clean up error paths
Libo Chen [Mon, 8 Jul 2013 22:59:47 +0000 (15:59 -0700)]
drivers/iommu/msm_iommu_dev.c: fix leak and clean up error paths

Fix two obvious problems:

1. We have registered msm_iommu_driver first, and need unregister it
   when registered msm_iommu_ctx_driver fail

2. We don't need to kfree drvdata before kzalloc was successful.

[akpm@linux-foundation.org: remove now-unneeded initialization of ctx_drvdata, remove unneeded braces]
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agofsnotify: update comments concerning locking scheme
Lino Sanfilippo [Mon, 8 Jul 2013 22:59:46 +0000 (15:59 -0700)]
fsnotify: update comments concerning locking scheme

There have been changes in the locking scheme of fsnotify but the
comments in the source code have not been updated yet.  This patch
corrects this.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoinotify: fix race when adding a new watch
Lino Sanfilippo [Mon, 8 Jul 2013 22:59:45 +0000 (15:59 -0700)]
inotify: fix race when adding a new watch

In inotify_new_watch() the number of watches for a group is compared
against the max number of allowed watches and increased afterwards.  The
check and incrementation is not done atomically, so it is possible for
multiple concurrent threads to pass the check and increment the number
of marks above the allowed max.

This patch uses an inotify groups mark_lock to ensure that both check
and incrementation are done atomic.  Furthermore we dont have to worry
about the race that allows a concurrent thread to add a watch just after
inotify_update_existing_watch() returned with -ENOENT anymore, since
this is also synchronized by the groups mark mutex now.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodnotify: replace dnotify_mark_mutex with mark mutex of dnotify_group
Lino Sanfilippo [Mon, 8 Jul 2013 22:59:44 +0000 (15:59 -0700)]
dnotify: replace dnotify_mark_mutex with mark mutex of dnotify_group

There is no need to use a special mutex to protect against the
fcntl/close race (see dnotify.c for a description of this race).
Instead the dnotify_groups mark mutex can be used.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agofanotify: put duplicate code for adding vfsmount/inode marks into an own function
Lino Sanfilippo [Mon, 8 Jul 2013 22:59:43 +0000 (15:59 -0700)]
fanotify: put duplicate code for adding vfsmount/inode marks into an own function

The code under the groups mark_mutex in fanotify_add_inode_mark() and
fanotify_add_vfsmount_mark() is almost identical.  So put it into a
seperate function.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agofanotify: fix races when adding/removing marks
Lino Sanfilippo [Mon, 8 Jul 2013 22:59:42 +0000 (15:59 -0700)]
fanotify: fix races when adding/removing marks

For both adding an event to an existing mark and destroying a mark we
first have to find it via fsnotify_find_[inode|vfsmount]_mark().  But
getting the mark and adding an event (or destroying it) is not done
atomically.  This opens a race where a thread is about to destroy a mark
while another thread still finds the same mark and adds an event to its
mask although it will be destroyed.

Another race exists concerning the excess of a groups number of marks
limit: When a mark is added the number of group marks is checked against
the max number of marks per group and increased afterwards.  Since check
and increment is also not done atomically, this may result in 2 or more
processes passing the check at the same time and increasing the number
of group marks above the allowed limit.

With this patch both races are avoided by doing the concerning
operations with the groups mark mutex locked.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agofanotify: info leak in copy_event_to_user()
Dan Carpenter [Mon, 8 Jul 2013 22:59:40 +0000 (15:59 -0700)]
fanotify: info leak in copy_event_to_user()

The ->reserved field isn't cleared so we leak one byte of stack
information to userspace.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoaudit: Fix decimal constant description
Michal Simek [Mon, 8 Jul 2013 22:59:39 +0000 (15:59 -0700)]
audit: Fix decimal constant description

Use proper decimal type for comparison with u32.

Compilation warning was introduced by 780a7654 ("audit: Make testing for
a valid loginuid explicit.")

  kernel/auditfilter.c: In function 'audit_data_to_entry':
  kernel/auditfilter.c:426:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
     if ((f->type == AUDIT_LOGINUID) && (f->val == 4294967295)) {

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokernel/auditfilter.c: fix leak in audit_add_rule() error path
Chen Gang [Mon, 8 Jul 2013 22:59:38 +0000 (15:59 -0700)]
kernel/auditfilter.c: fix leak in audit_add_rule() error path

If both 'tree' and 'watch' are valid we must call audit_put_tree(), just
like the preceding code within audit_add_rule().

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokernel/auditfilter.c: fixing build warning
Raphael S. Carvalho [Mon, 8 Jul 2013 22:59:37 +0000 (15:59 -0700)]
kernel/auditfilter.c: fixing build warning

  kernel/auditfilter.c:426: warning: this decimal constant is unsigned only in ISO C90

Signed-off-by: Raphael S. Carvalho <raphael.scarv@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoaudit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names...
Jeff Layton [Mon, 8 Jul 2013 22:59:36 +0000 (15:59 -0700)]
audit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names record

The old audit PATH records for mq_open looked like this:

  type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777
  dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
  obj=system_u:object_r:tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732
  dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
  obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023

...with the audit related changes that went into 3.7, they now look like this:

  type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655
  dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
  obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926
  dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
  obj=system_u:object_r:tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq"

Both of these look wrong to me.  As Steve Grubb pointed out:

 "What we need is 1 PATH record that identifies the MQ.  The other PATH
  records probably should not be there."

Fix it to record the mq root as a parent, and flag it such that it
should be hidden from view when the names are logged, since the root of
the mq filesystem isn't terribly interesting.  With this change, we get
a single PATH record that looks more like this:

  type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914
  dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00
  obj=unconfined_u:object_r:user_tmpfs_t:s0

In order to do this, a new audit_inode_parent_hidden() function is
added.  If we do it this way, then we avoid having the existing callers
of audit_inode needing to do any sort of flag conversion if auditing is
inactive.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Jiri Jaburek <jjaburek@redhat.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/dma/iop-adma.c: fix new warnings
Olof Johansson [Mon, 8 Jul 2013 22:59:35 +0000 (15:59 -0700)]
drivers/dma/iop-adma.c: fix new warnings

The recent "drivers/dma: remove unused support for MEMSET operations"
change has fallout from lack of build testing by the author.  This
fixes:

  drivers/dma/iop-adma.c:1020:13: warning: unused variable 'dma_addr' [-Wunused-variable]
  drivers/dma/iop-adma.c:1519:2: warning: format '%s' expects a matching 'char *' argument [-Wformat=]

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Sun, 7 Jul 2013 18:11:43 +0000 (11:11 -0700)]
Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:
 "Once you have some time from extended weekend celebrations please
  consider pulling the following to get:
   - Various fixes and PCI driver for dw_dmac by Andy
   - DT binding for imx-dma by Markus & imx-sdma by Shawn
   - DT fixes for dmaengine by Lars
   - jz4740 dmac driver by Lars
   - and various fixes across the drivers"

What "extended weekend celebrations"?  I'm in the merge window, who has
time for extended celebrations..

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits)
  DMA: shdma: add DT support
  DMA: shdma: shdma_chan_filter() has to be in shdma-base.h
  DMA: shdma: (cosmetic) don't re-calculate a pointer
  dmaengine: at_hdmac: prepare clk before calling enable
  dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions
  dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()
  dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding
  ARM: at91: dt: add header to define at_hdmac configuration
  MIPS: jz4740: Correct clock gate bit for DMA controller
  MIPS: jz4740: Remove custom DMA API
  MIPS: jz4740: Register jz4740 DMA device
  dma: Add a jz4740 dmaengine driver
  MIPS: jz4740: Acquire and enable DMA controller clock
  dma: mmp_tdma: disable irq when disabling dma channel
  dmaengine: PL08x: Avoid collisions with get_signal() macro
  dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically
  dma: dw: add PCI part of the driver
  dma: dw: split driver to library part and platform code
  dma: move dw_dmac driver to an own directory
  dw_dmac: don't check resource with devm_ioremap_resource
  ...

11 years agoMerge branch 'cpuinit-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg...
Linus Torvalds [Sun, 7 Jul 2013 18:01:19 +0000 (11:01 -0700)]
Merge branch 'cpuinit-delete' of git://git./linux/kernel/git/paulg/linux

Pull first stage of __cpuinit removal from Paul Gortmaker:
 "The two commits here 1) dummy out all the __cpuinit macros so that we
  no longer generate such sections, and then 2) remove all the section
  processing that we used to do for those sections.

  This makes all the __cpuinit and friends no-ops, so that we can remove
  the use cases of it at our leisure.  Expect stage 2, which does the
  tree wide removal sweep at the end of the merge window."

* 'cpuinit-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  modpost: remove all traces of cpuinit/cpuexit sections
  init.h: remove __cpuinit sections from the kernel

11 years agoMerge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 6 Jul 2013 21:09:38 +0000 (14:09 -0700)]
Merge branch 'timers-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer core updates from Thomas Gleixner:
 "The timer changes contain:

   - posix timer code consolidation and fixes for odd corner cases

   - sched_clock implementation moved from ARM to core code to avoid
     duplication by other architectures

   - alarm timer updates

   - clocksource and clockevents unregistration facilities

   - clocksource/events support for new hardware

   - precise nanoseconds RTC readout (Xen feature)

   - generic support for Xen suspend/resume oddities

   - the usual lot of fixes and cleanups all over the place

  The parts which touch other areas (ARM/XEN) have been coordinated with
  the relevant maintainers.  Though this results in an handful of
  trivial to solve merge conflicts, which we preferred over nasty cross
  tree merge dependencies.

  The patches which have been committed in the last few days are bug
  fixes plus the posix timer lot.  The latter was in akpms queue and
  next for quite some time; they just got forgotten and Frederic
  collected them last minute."

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
  hrtimer: Remove unused variable
  hrtimers: Move SMP function call to thread context
  clocksource: Reselect clocksource when watchdog validated high-res capability
  posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting
  posix_timers: fix racy timer delta caching on task exit
  posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
  selftests: add basic posix timers selftests
  posix_cpu_timers: consolidate expired timers check
  posix_cpu_timers: consolidate timer list cleanups
  posix_cpu_timer: consolidate expiry time type
  tick: Sanitize broadcast control logic
  tick: Prevent uncontrolled switch to oneshot mode
  tick: Make oneshot broadcast robust vs. CPU offlining
  x86: xen: Sync the CMOS RTC as well as the Xen wallclock
  x86: xen: Sync the wallclock when the system time is set
  timekeeping: Indicate that clock was set in the pvclock gtod notifier
  timekeeping: Pass flags instead of multiple bools to timekeeping_update()
  xen: Remove clock_was_set() call in the resume path
  hrtimers: Support resuming with two or more CPUs online (but stopped)
  timer: Fix jiffies wrap behavior of round_jiffies_common()
  ...

11 years agoMerge branch 'for-v3.11' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Linus Torvalds [Sat, 6 Jul 2013 19:41:54 +0000 (12:41 -0700)]
Merge branch 'for-v3.11' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping

Pull ARM DMA mapping updates from Marek Szyprowski:
 "This contains important bugfixes and an update for IOMMU integration
  support for ARM architecture"

* 'for-v3.11' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma: Drop __GFP_COMP for iommu dma memory allocations
  ARM: DMA-mapping: mark all !DMA_TO_DEVICE pages in unmapping as clean
  ARM: dma-mapping: NULLify dev->archdata.mapping pointer on detach
  ARM: dma-mapping: convert DMA direction into IOMMU protection attributes
  ARM: dma-mapping: Get pages if the cpu_addr is out of atomic_pool

11 years agoMerge tag 'metag-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan...
Linus Torvalds [Sat, 6 Jul 2013 19:39:39 +0000 (12:39 -0700)]
Merge tag 'metag-for-v3.11' of git://git./linux/kernel/git/jhogan/metag

Pull Metag architecture changes from James Hogan:
 - Infrastructure and DT files for TZ1090 SoC (pin control drivers
   already merged via pinctrl tree).
 - Panic on boot instead of just warning if cache aliasing possible.
 - Various SMP/hotplug fixes.
 - Various other randconfig/sparse fixes.

* tag 'metag-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (24 commits)
  metag: move EXPORT_SYMBOL(csum_partial) to metag_ksyms.c
  metag: cpu hotplug: route_irq: preserve irq mask
  metag: kick: add missing irq_enter/exit to kick_handler()
  metag: smp: don't spin waiting for CPU to start
  metag: smp: enable irqs after set_cpu_online
  metag: use clear_tasks_mm_cpumask()
  metag: tz1090: select and instantiate pinctrl-tz1090-pdc
  metag: tz1090: select and instantiate pinctrl-tz1090
  metag: don't check for cache aliasing on smp cpu boot
  metag: panic if cache aliasing possible
  metag: *.dts: include using preprocessor
  metag: add <dt-bindings/> symlink
  metag/.gitignore: Extend the *.dtb pattern to match the dtb.S files
  metag/traps: include setup.h for the per_cpu_trap_init declaration
  metag/traps: Mark die() as __noreturn to match the declaration.
  metag/processor.h: Add missing cpuinfo_op declaration.
  metag/setup: Restrict scope for the capabilities variable
  metag/mm/cache: Restrict scope for metag_lnkget_probe
  metag/asm/irq.h: Declare init_IRQ
  metag/kernel/irq.c: Declare root_domain as static
  ...

11 years agoMerge tag 'xenarm-for-3.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 6 Jul 2013 19:38:42 +0000 (12:38 -0700)]
Merge tag 'xenarm-for-3.11-tag' of git://git./linux/kernel/git/sstabellini/xen

Pull Xen ARM update rom Stefano Stabellini:
 "Just one commit this time: the implementation of the tmem hypercall
  for arm and arm64"

* tag 'xenarm-for-3.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen:
  xen/arm and xen/arm64: implement HYPERVISOR_tmem_op

11 years agoMerge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux
Linus Torvalds [Sat, 6 Jul 2013 19:37:04 +0000 (12:37 -0700)]
Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux

Pull irqdomain refactoring from Grant Likely:
 "This is the long awaited simplification of irqdomain.  It gets rid of
  the different types of irq domains and instead both linear and tree
  mappings can be supported in a single domain.  Doing this removes a
  lot of special case code and makes irq domains simpler to understand
  overall"

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux:
  irq: fix checkpatch error
  irqdomain: Include hwirq number in /proc/interrupts
  irqdomain: make irq_linear_revmap() a fast path again
  irqdomain: remove irq_domain_generate_simple()
  irqdomain: Refactor irq_domain_associate_many()
  irqdomain: Beef up debugfs output
  irqdomain: Clean up aftermath of irq_domain refactoring
  irqdomain: Eliminate revmap type
  irqdomain: merge linear and tree reverse mappings.
  irqdomain: Add a name field
  irqdomain: Replace LEGACY mapping with LINEAR
  irqdomain: Relax failure path on setting up mappings

11 years agohrtimer: Remove unused variable
Thomas Gleixner [Sat, 6 Jul 2013 08:34:00 +0000 (10:34 +0200)]
hrtimer: Remove unused variable

Sigh, should have noticed myself.

Reported-by: fengguang.wu@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Fri, 5 Jul 2013 19:12:33 +0000 (12:12 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto update from Herbert Xu:
 - Do not idle omap device between crypto operations in one session.
 - Added sha224/sha384 shims for SSSE3.
 - More optimisations for camellia-aesni-avx2.
 - Removed defunct blowfish/twofish AVX2 implementations.
 - Added unaligned buffer self-tests.
 - Added PCLMULQDQ optimisation for CRCT10DIF.
 - Added support for Freescale's DCP co-processor
 - Misc fixes.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (44 commits)
  crypto: testmgr - test hash implementations with unaligned buffers
  crypto: testmgr - test AEADs with unaligned buffers
  crypto: testmgr - test skciphers with unaligned buffers
  crypto: testmgr - check that entries in alg_test_descs are in correct order
  Revert "crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher"
  Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher"
  crypto: camellia-aesni-avx2 - tune assembly code for more performance
  hwrng: bcm2835 - fix MODULE_LICENSE tag
  hwrng: nomadik - use clk_prepare_enable()
  crypto: picoxcell - replace strict_strtoul() with kstrtoul()
  crypto: dcp - Staticize local symbols
  crypto: dcp - Use NULL instead of 0
  crypto: dcp - Use devm_* APIs
  crypto: dcp - Remove redundant platform_set_drvdata()
  hwrng: use platform_{get,set}_drvdata()
  crypto: omap-aes - Don't idle/start AES device between Encrypt operations
  crypto: crct10dif - Use PTR_RET
  crypto: ux500 - Cocci spatch "resource_size.spatch"
  crypto: sha256_ssse3 - add sha224 support
  crypto: sha512_ssse3 - add sha384 support
  ...

11 years agoMerge tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubi
Linus Torvalds [Fri, 5 Jul 2013 19:09:48 +0000 (12:09 -0700)]
Merge tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubi

Pull ubi fixes from Artem Bityutskiy:
 "A couple of fixes and clean-ups, allow for assigning user-defined UBI
  device numbers when attaching MTD devices by using the "mtd=" module
  parameter"

* tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubi:
  UBI: support ubi_num on mtd.ubi command line
  UBI: fastmap break out of used PEB search
  UBI: document UBI_IOCVOLUP better in user header
  UBI: do not abort init when ubi.mtd devices cannot be found
  UBI: drop redundant "UBI error" string

11 years agoMerge tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Fri, 5 Jul 2013 19:08:47 +0000 (12:08 -0700)]
Merge tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubifs

Pull ubifs fix from Artem Bityutskiy:
 "Only a single patch which fixes a message"

* tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: correct mount message

11 years agohrtimers: Move SMP function call to thread context
Thomas Gleixner [Fri, 5 Jul 2013 10:09:18 +0000 (12:09 +0200)]
hrtimers: Move SMP function call to thread context

smp_call_function_* must not be called from softirq context.

But clock_was_set() which calls on_each_cpu() is called from softirq
context to implement a delayed clock_was_set() for the timer interrupt
handler. Though that almost never gets invoked. A recent change in the
resume code uses the softirq based delayed clock_was_set to support
Xens resume mechanism.

linux-next contains a new warning which warns if smp_call_function_*
is called from softirq context which gets triggered by that Xen
change.

Fix this by moving the delayed clock_was_set() call to a work context.

Reported-and-tested-by: Artem Savkov <artem.savkov@gmail.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>,
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: xen-devel@lists.xen.org
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
11 years agoclocksource: Reselect clocksource when watchdog validated high-res capability
Thomas Gleixner [Thu, 4 Jul 2013 20:46:45 +0000 (22:46 +0200)]
clocksource: Reselect clocksource when watchdog validated high-res capability

Up to commit 5d33b883a (clocksource: Always verify highres capability)
we had no sanity check when selecting a clocksource, which prevented
that a non highres capable clocksource is used when the system already
switched to highres/nohz mode.

The new sanity check works as Alex and Tim found out. It prevents the
TSC from being used. This happens because on x86 the boot process
looks like this:

 tsc_start_freqency_validation(TSC);
 clocksource_register(HPET);
 clocksource_done_booting();
clocksource_select()
Selects HPET which is valid for high-res

 switch_to_highres();

 clocksource_register(TSC);
  TSC is not selected, because it is not yet
flagged as VALID_HIGH_RES

 clocksource_watchdog()
Validates TSC for highres, but that does not make TSC
the current clocksource.

Before the sanity check was added, we installed TSC unvalidated which
worked most of the time. If the TSC was really detected as unstable,
then the unstable logic removed it and installed HPET again.

The sanity check is correct and needed. So the watchdog needs to kick
a reselection of the clocksource, when it qualifies TSC as a valid
high res clocksource.

To solve this, we mark the clocksource which got the flag
CLOCK_SOURCE_VALID_FOR_HRES set by the watchdog with an new flag
CLOCK_SOURCE_RESELECT and trigger the watchdog thread. The watchdog
thread evaluates the flag and invokes clocksource_select() when set.

To avoid that the clocksource_done_booting() code, which is about to
install the first real clocksource anyway, needs to go through
clocksource_select and tick_oneshot_notify() pointlessly, split out
the clocksource_watchdog_kthread() list walk code and invoke the
select/notify only when called from clocksource_watchdog_kthread().

So clocksource_done_booting() can utilize the same splitout code
without the select/notify invocation and the clocksource_mutex
unlock/relock dance.

Reported-and-tested-by: Alex Shi <alex.shi@intel.com>
Cc: Hans Peter Anvin <hpa@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1307042239150.11637@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
11 years agoDMA: shdma: add DT support
Guennadi Liakhovetski [Tue, 18 Jun 2013 16:16:57 +0000 (18:16 +0200)]
DMA: shdma: add DT support

This patch adds Device Tree support to the shdma driver. No special DT
properties are used, only standard DMA DT bindings are implemented. Since
shdma controllers reside on SoCs, their configuration is SoC-specific and
shall be passed to the driver from the SoC platform data, using the
auxdata procedure.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agoDMA: shdma: shdma_chan_filter() has to be in shdma-base.h
Guennadi Liakhovetski [Thu, 6 Jun 2013 15:37:14 +0000 (17:37 +0200)]
DMA: shdma: shdma_chan_filter() has to be in shdma-base.h

shdma_chan_filter() is a function, provided by the shdma-base.c module,
move its declaration to the appropriate header.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agoDMA: shdma: (cosmetic) don't re-calculate a pointer
Guennadi Liakhovetski [Thu, 6 Jun 2013 15:37:13 +0000 (17:37 +0200)]
DMA: shdma: (cosmetic) don't re-calculate a pointer

Use an existing pointer instead of retrieving it again.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodmaengine: at_hdmac: prepare clk before calling enable
Boris BREZILLON [Wed, 19 Jun 2013 11:14:54 +0000 (13:14 +0200)]
dmaengine: at_hdmac: prepare clk before calling enable

Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to
avoid common clk framework warnings.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
[nicolas.ferre@atmel.com: remove return code checking in at_dma_resume_noirq()]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
11 years agodmaengine/trivial: at_hdmac: add curly brackets to if/else expressions
Nicolas Ferre [Fri, 7 Jun 2013 15:26:14 +0000 (17:26 +0200)]
dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions

Correct coding style following the patch:
7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91:
Get residual bytes in dma buffer).

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
11 years agodmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()
Nicolas Ferre [Fri, 7 Jun 2013 15:10:53 +0000 (17:10 +0200)]
dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()

Since patch 7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91:
Get residual bytes in dma buffer), the function
atc_cleanup_descriptors() is not used anymore. We remove it to prevent
warnings.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
11 years agodmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding
Ludovic Desroches [Thu, 13 Jun 2013 08:39:39 +0000 (10:39 +0200)]
dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding

For most devices the FIFO configuration is the same i.e. when half FIFO size is
available/filled, a source/destination request is serviced. But USART devices
have to do it when there is enough space/data available to perform a single
AHB access so the ASAP configuration.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
11 years agoARM: at91: dt: add header to define at_hdmac configuration
Ludovic Desroches [Thu, 13 Jun 2013 08:39:38 +0000 (10:39 +0200)]
ARM: at91: dt: add header to define at_hdmac configuration

DMA-cell content is a concatenation of several values. In order to keep this
stuff human readable, macros are introduced.

The values for the FIFO configuration are not the same as the ones used in the
configuration register in order to keep backward compatibility. Most devices
use the half FIFO configuration but USART ones have to use the ASAP
configuration. This parameter was not initially planed to be into the at91 dma
dt binding. The third cell will be used to store this parameter, it will
become a concatenation of the FIFO configuration and of the peripheral ID. In
order to keep backward compatibility i.e. FIFO configuration is equal to 0, we
have to perform a translation since the value to put in the register to set
half FIFO is 1.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
11 years agoMIPS: jz4740: Correct clock gate bit for DMA controller
Maarten ter Huurne [Thu, 30 May 2013 16:25:00 +0000 (18:25 +0200)]
MIPS: jz4740: Correct clock gate bit for DMA controller

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agoMIPS: jz4740: Remove custom DMA API
Lars-Peter Clausen [Thu, 30 May 2013 16:25:05 +0000 (18:25 +0200)]
MIPS: jz4740: Remove custom DMA API

Now that all users of the custom jz4740 DMA API have been converted to use
the dmaengine API instead we can remove the custom API and move all the code
talking to the hardware to the dmaengine driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agoMIPS: jz4740: Register jz4740 DMA device
Lars-Peter Clausen [Thu, 30 May 2013 16:25:03 +0000 (18:25 +0200)]
MIPS: jz4740: Register jz4740 DMA device

Register a device for the newly added jz4740 dmaengine driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
[manually edited to align struct assignment]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: Add a jz4740 dmaengine driver
Lars-Peter Clausen [Thu, 30 May 2013 16:25:02 +0000 (18:25 +0200)]
dma: Add a jz4740 dmaengine driver

This patch adds dmaengine support for the JZ4740 DMA controller. For now the
driver will be a wrapper around the custom JZ4740 DMA API. Once all users of the
custom JZ4740 DMA API have been converted to the dmaengine API the custom API
will be removed and direct hardware access will be added to the dmaengine
driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agoMIPS: jz4740: Acquire and enable DMA controller clock
Maarten ter Huurne [Thu, 30 May 2013 16:25:01 +0000 (18:25 +0200)]
MIPS: jz4740: Acquire and enable DMA controller clock

Previously, it was assumed that the DMA controller clock is not gated
when the kernel starts running. While that is the power-on state, it is
safer to not rely on that.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: mmp_tdma: disable irq when disabling dma channel
Qiao Zhou [Sat, 15 Jun 2013 04:51:48 +0000 (12:51 +0800)]
dma: mmp_tdma: disable irq when disabling dma channel

mask dma irq when disabling dma channel, so that interrupt status
will not be set and interrupt won't come again.

Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Acked-by: Zhangfei Gao <zhangfei.gao@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodmaengine: PL08x: Avoid collisions with get_signal() macro
Mark Brown [Wed, 19 Jun 2013 19:38:28 +0000 (20:38 +0100)]
dmaengine: PL08x: Avoid collisions with get_signal() macro

As pointed out by Arnd Bergmann there is a get_signal macro definied in
linux/signal.h which can conflict with the platform data callback
function of the same name leading to confusing errors from the compiler
(especially if signal.h manages to get pulled into the driver itself due
to header dependencies).  Avoid such errors by renaming get_signal and
put_signal in the platform data to get_xfer_signal and put_xfer_signal.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically
Vinod Koul [Wed, 12 Jun 2013 08:09:57 +0000 (13:39 +0530)]
dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: dw: add PCI part of the driver
Andy Shevchenko [Wed, 5 Jun 2013 12:26:46 +0000 (15:26 +0300)]
dma: dw: add PCI part of the driver

This is the PCI part of the DesignWare DMAC driver. The controller is usually
used in the Intel hardware such as Intel Medfield.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: dw: split driver to library part and platform code
Andy Shevchenko [Wed, 5 Jun 2013 12:26:45 +0000 (15:26 +0300)]
dma: dw: split driver to library part and platform code

To simplify the driver development let's split driver to library and platform
code parts. It helps us to add PCI driver in future.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[Fixed compile error and few checkpatch issues]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: move dw_dmac driver to an own directory
Andy Shevchenko [Wed, 5 Jun 2013 12:26:44 +0000 (15:26 +0300)]
dma: move dw_dmac driver to an own directory

The dw_dmac driver is going to be split into multiple files. To make this more
convenient move it to an own directory.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodw_dmac: don't check resource with devm_ioremap_resource
Andy Shevchenko [Wed, 5 Jun 2013 12:26:43 +0000 (15:26 +0300)]
dw_dmac: don't check resource with devm_ioremap_resource

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: pl330: use dma_addr_t for describing bus addresses
Will Deacon [Mon, 10 Jun 2013 18:34:38 +0000 (19:34 +0100)]
dma: pl330: use dma_addr_t for describing bus addresses

The microcode bus address (pl330_dmac.mcode_bus) is currently a u32,
which fails to compile when building on a system with 64-bit bus
addresses.

This patch uses dma_addr_t to represent the address instead.

Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: pl330: rip out broken, redundant ID probing
Will Deacon [Mon, 10 Jun 2013 18:34:37 +0000 (19:34 +0100)]
dma: pl330: rip out broken, redundant ID probing

The PL330 driver probes the peripheral and primecell IDs of the device to
make sure that it is indeed an AMBA PL330. However, it does this by
making byte accesses to a device mapping of the word-aligned ID
registers, which is either UNPREDICTABLE or generates an alignment fault
(depending on the presence of the virtualisation extensions).

Rather than fix this code, we can actually rip most of it out and let
the AMBA bus driver correctly do the probing for us.

Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: imx-sdma: move to generic device tree bindings
Shawn Guo [Thu, 30 May 2013 14:23:32 +0000 (22:23 +0800)]
dma: imx-sdma: move to generic device tree bindings

Update imx-sdma driver to adopt generic DMA device tree bindings.  It
calls of_dma_controller_register() with imx-sdma specific of_dma_xlate
to get the generic DMA device tree helper support.  The #dma-cells for
imx-sdma must be 3, which includes request ID, peripheral type and
priority.

The existing way of requesting channel, clients directly call
dma_request_channel(), still work there, and will be removed after
all imx-sdma clients get converted to generic DMA device tree helper.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
11 years agodmaengine: sirf: set dma residue based on the current dma transfer position
Rongjun Ying [Tue, 14 May 2013 15:03:20 +0000 (23:03 +0800)]
dmaengine: sirf: set dma residue based on the current dma transfer position

read SIRFSOC_DMA_CH_ADDR register to get current dma transfer position, then
update dma residue so that things like ALSA drivers work as ALSA drivers need
the right residue value.

Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: tegra: avoid channel lock up after free
Dmitry Osipenko [Sat, 11 May 2013 16:30:53 +0000 (20:30 +0400)]
dma: tegra: avoid channel lock up after free

Lock scenario: Channel 1 was allocated and prepared as slave_sg, used and freed.
Now preparation of cyclic dma on channel 1 will fail with err "DMA configuration
conflict" because tdc->isr_handler still setted to handle_once_dma_done.

This happens because tegra_dma_abort_all() won't be called on channel freeing
if pending list is empty and channel not busy. We need to clear isr_handler
on channel freeing to avoid locking.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: tegra20-apbdma: err message correction
Dmitry Osipenko [Sat, 11 May 2013 16:30:52 +0000 (20:30 +0400)]
dma: tegra20-apbdma: err message correction

Fixed err msg params order on irq request fail.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodw_dmac: remove inline marking of EXPORT_SYMBOL functions
Denis Efremov [Thu, 9 May 2013 09:19:40 +0000 (13:19 +0400)]
dw_dmac: remove inline marking of EXPORT_SYMBOL functions

EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: timb_dma: remove unnecessary platform_set_drvdata()
Jingoo Han [Mon, 6 May 2013 03:54:48 +0000 (12:54 +0900)]
dma: timb_dma: remove unnecessary platform_set_drvdata()

The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: at_hdmac: remove unnecessary platform_set_drvdata()
Jingoo Han [Mon, 6 May 2013 03:53:33 +0000 (12:53 +0900)]
dma: at_hdmac: remove unnecessary platform_set_drvdata()

The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: mxs-dma: Staticize mxs_dma_xlate
Fabio Estevam [Fri, 24 May 2013 19:37:27 +0000 (16:37 -0300)]
dma: mxs-dma: Staticize mxs_dma_xlate

Fix the following sparse warning:

drivers/dma/mxs-dma.c:696:17: warning: symbol 'mxs_dma_xlate' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: use platform_{get,set}_drvdata()
Jingoo Han [Fri, 24 May 2013 01:10:13 +0000 (10:10 +0900)]
dma: use platform_{get,set}_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Also, unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agoDMA: AT91: Get residual bytes in dma buffer
Elen Song [Fri, 10 May 2013 03:01:46 +0000 (11:01 +0800)]
DMA: AT91: Get residual bytes in dma buffer

Add support for returning the residue for current transfer cookie by
reading the transfered buffer size(BTSIZE) in CTRLA register.

For a single buffer cookie, the descriptor length minus BTSIZE
can get the residue.

For a lli cookie, remain_desc will record remain descriptor length
when last descriptor finish, the remain_desc minus BTSIZE can get the
current residue.

If the cookie has completed successfully, the residue will be zero.
If the cookie is in progress, it will be the number of bytes yet to be transferred.
If get residue error, the cookie will be turn into error status.

Check dma fifo to see if data remain, let issue pending finish remain work if there is.
Signed-off-by: Elen Song <elen.song@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agoDMA: AT91: Get transfer width
Elen Song [Fri, 10 May 2013 03:00:50 +0000 (11:00 +0800)]
DMA: AT91: Get transfer width

In one dma transfer, the data transfer width can be configured and it is limited by source or destination peripheral width,
tx_width will save the transfer width, but for memcpy, either source or destination transfer width is taken as tx_width.

Signed-off-by: Elen Song <elen.song@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodmaengine: at_hdmac/trivial: rearrange CFG register bits assignment
Nicolas Ferre [Fri, 10 May 2013 13:19:15 +0000 (15:19 +0200)]
dmaengine: at_hdmac/trivial: rearrange CFG register bits assignment

No modification in CFG register configuration, just rearrange
bits directives to group logically and make it more readable.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodmaengine: at_hdmac: extend hardware handshaking interface identification
Nicolas Ferre [Fri, 10 May 2013 13:19:14 +0000 (15:19 +0200)]
dmaengine: at_hdmac: extend hardware handshaking interface identification

Peripheral handshaking identification numbers can be bigger than 15, so new
fields have been created in the CFG register.
Add macros to take this modification into account and use them in
at_dma_xlate() function.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodmaengine: at_hdmac/trivial: correct typo in comment
Nicolas Ferre [Fri, 10 May 2013 13:19:13 +0000 (15:19 +0200)]
dmaengine: at_hdmac/trivial: correct typo in comment

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agoDMA: imx-dma: imxdma->dev used uninitialized
Markus Pargmann [Sun, 26 May 2013 09:53:21 +0000 (11:53 +0200)]
DMA: imx-dma: imxdma->dev used uninitialized

imxdma->dev is used for dev_warn before it was set.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agodma: imx-dma: Add oftree support
Markus Pargmann [Sun, 26 May 2013 09:53:20 +0000 (11:53 +0200)]
dma: imx-dma: Add oftree support

Adding devicetree support for imx-dma driver. Use driver name for
function 'imx_dma_is_general_purpose' because the devicename for
devicetree initialized devices is different.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
11 years agoMerge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux
Linus Torvalds [Thu, 4 Jul 2013 22:51:45 +0000 (15:51 -0700)]
Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux

Pull device tree updates from Grant Likely:
 "This branch contains the following changes:
   - Removal of CONFIG_OF_DEVICE, it is always enabled by CONFIG_OF
   - Remove #ifdef from linux/of_platform.h to increase compiler syntax
     coverage
   - Bug fix for address decoding on Bimini and js2x powerpc platforms.
   - miscellaneous binding changes

  One note on the above.  The binding changes going in from all kinds of
  different trees has gotten rather out of hand.  I picked up some
  during this cycle, but even going though my tree isn't a great fit.

  Ian Campbell has prototyped splitting the bindings and .dtb files into
  a separate repository.  The plan is to migrate to using that sometime
  in the next few kernel releases which should get rid of a lot of the
  churn on binding docs and .dts files"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux:
  of: Fix address decoding on Bimini and js2x machines
  of: remove CONFIG_OF_DEVICE
  usb: chipidea: depend on CONFIG_OF instead of CONFIG_OF_DEVICE
  of: remove of_platform_driver
  ibmebus: convert of_platform_driver to platform_driver
  driver core: move to_platform_driver to platform_device.h
  mfd: DT bindings for the palmas family MFD
  ARM: dts: omap3-devkit8000: fix NAND memory binding
  of/base: fix typos
  of: remove #ifdef from linux/of_platform.h

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Thu, 4 Jul 2013 22:35:08 +0000 (15:35 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "First round of updates for the input subsystem.

  You will get a new touchsreen driver for Cypress 4th generation
  devices, a driver for a special controller implementing PS/2 protocol
  in OLPC devices, and a driver for power key for SiRFprimaII PWRC.

  HID and bcm5497 now support for the 2013 MacBook Air.

  EVIOCGKEY and the rest of evdev ioctls now flush events of matching
  type from the client's event queue so that clients can be sure any
  events received after issuing EVIOCG* ioctl are new events.

  And a host of cleanups and improvements in other drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
  Input: cyttsp4 - kfree xfer_buf on error path in probe()
  Input: tps6507x-ts - select INPUT_POLLDEV
  Input: bcm5974 - add support for the 2013 MacBook Air
  HID: apple: Add support for the 2013 Macbook Air
  Input: cyttsp4 - leak on error path in probe()
  Input: cyttsp4 - silence NULL dereference warning
  Input: cyttsp4 - silence shift wrap warning
  Input: tps6507x-ts - convert to polled input device infrastructure
  ARM: davinci: da850-evm: remove vref from touchscreen platform data
  Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp - I2C driver split into two modules
  Input: add OLPC AP-SP driver
  Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe()
  Input: tps6507x-ts - remove vref from platform data
  Input: tps6507x-ts - use bool for booleans
  Input: tps6507x-ts - remove bogus unreachable code
  Input: samsung-keypad - let device core setup the default pin configuration
  Input: wacom_i2c - implement hovering capability
  ...

11 years agoMerge branch 'timers/posix-cpu-timers-for-tglx' of
Thomas Gleixner [Thu, 4 Jul 2013 21:11:22 +0000 (23:11 +0200)]
Merge branch 'timers/posix-cpu-timers-for-tglx' of
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core

Frederic sayed: "Most of these patches have been hanging around for
several month now, in -mmotm for a significant chunk. They already
missed a few releases."

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
11 years agoInput: cyttsp4 - kfree xfer_buf on error path in probe()
Ferruh Yigit [Thu, 4 Jul 2013 21:02:45 +0000 (14:02 -0700)]
Input: cyttsp4 - kfree xfer_buf on error path in probe()

If probe() fails after cd->xfer_buf allocated, it will not freed.
Added kfree(cd->xfer_buf) with and error label.

Signed-off-by: Ferruh Yigit <fery@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
11 years agoMerge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa...
Linus Torvalds [Thu, 4 Jul 2013 21:02:09 +0000 (14:02 -0700)]
Merge branch 'i2c/for-next' of git://git./linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 - new drivers: Kontron PLD, Wondermedia VT
 - mv64xxx driver gained sun4i support and a bigger cleanup
 - duplicate driver 'intel-mid' removed
 - added generic device tree binding for sda holding time (and
   designware driver already uses it)
 - we tried to allow driver probing with only device tree and no i2c
   ids, but I had to revert it because of side effects.  Needs some
   rethinking.
 - driver bugfixes, cleanups...

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
  i2c-designware: use div_u64 to fix link
  i2c: Kontron PLD i2c bus driver
  i2c: iop3xxx: fix build failure after waitqueue changes
  i2c-designware: make SDA hold time configurable
  i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided
  i2c: imx: allow autoloading on dt ids
  i2c: mv64xxx: Fix transfer error code
  i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs
  i2c: omap: correct usage of the interrupt enable register
  i2c-pxa: prepare clock before use
  Revert "i2c: core: make it possible to match a pure device tree driver"
  i2c: nomadik: allocate adapter number dynamically
  i2c: nomadik: support elder Nomadiks
  i2c: mv64xxx: Add Allwinner sun4i compatible
  i2c: mv64xxx: make the registers offset configurable
  i2c: mv64xxx: Add macros to access parts of registers
  i2c: vt8500: Add support for I2C bus on Wondermedia SoCs
  i2c: designware: fix race between subsequent xfers
  i2c: bfin-twi: Read and write the FIFO in loop
  i2c: core: make it possible to match a pure device tree driver
  ...

11 years agoMerge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Thu, 4 Jul 2013 19:30:30 +0000 (12:30 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "The patch set is mostly driver updates (usf, zfcp, lpfc, mpt2sas,
  megaraid_sas, bfa, ipr) and a few bug fixes.  Also of note is that the
  Buslogic driver has been rewritten to a better coding style and 64 bit
  support added.  We also removed the libsas limitation on 16 bytes for
  the command size (currently no drivers make use of this)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits)
  [SCSI] megaraid: minor cut and paste error fixed.
  [SCSI] ufshcd-pltfrm: remove unnecessary dma_set_coherent_mask() call
  [SCSI] ufs: fix register address in UIC error interrupt handling
  [SCSI] ufshcd-pltfrm: add missing empty slot in ufs_of_match[]
  [SCSI] ufs: use devres functions for ufshcd
  [SCSI] ufs: Fix the response UPIU length setting
  [SCSI] ufs: rework link start-up process
  [SCSI] ufs: remove version check before IS reg clear
  [SCSI] ufs: amend interrupt configuration
  [SCSI] ufs: wrap the i/o access operations
  [SCSI] storvsc: Update the storage protocol to win8 level
  [SCSI] storvsc: Increase the value of scsi timeout for storvsc devices
  [SCSI] MAINTAINERS: Add myself as the maintainer for BusLogic SCSI driver
  [SCSI] BusLogic: Port driver to 64-bit.
  [SCSI] BusLogic: Fix style issues
  [SCSI] libiscsi: Added new boot entries in the session sysfs
  [SCSI] aacraid: Fix for arrays are going offline in the system. System hangs
  [SCSI] ipr: IOA Status Code(IOASC) update
  [SCSI] sd: Update WRITE SAME heuristics
  [SCSI] fnic: potential dead lock in fnic_is_abts_pending()
  ...

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Linus Torvalds [Thu, 4 Jul 2013 18:40:58 +0000 (11:40 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/trivial

Pull trivial tree updates from Jiri Kosina:
 "The usual stuff from trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  treewide: relase -> release
  Documentation/cgroups/memory.txt: fix stat file documentation
  sysctl/net.txt: delete reference to obsolete 2.4.x kernel
  spinlock_api_smp.h: fix preprocessor comments
  treewide: Fix typo in printk
  doc: device tree: clarify stuff in usage-model.txt.
  open firmware: "/aliasas" -> "/aliases"
  md: bcache: Fixed a typo with the word 'arithmetic'
  irq/generic-chip: fix a few kernel-doc entries
  frv: Convert use of typedef ctl_table to struct ctl_table
  sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
  doc: clk: Fix incorrect wording
  Documentation/arm/IXP4xx fix a typo
  Documentation/networking/ieee802154 fix a typo
  Documentation/DocBook/media/v4l fix a typo
  Documentation/video4linux/si476x.txt fix a typo
  Documentation/virtual/kvm/api.txt fix a typo
  Documentation/early-userspace/README fix a typo
  Documentation/video4linux/soc-camera.txt fix a typo
  lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
  ...

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Thu, 4 Jul 2013 18:39:00 +0000 (11:39 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID updates from Jiri Kosina:
 - HID battery handling cleanup by David Herrmann
 - ELO 4000/4500 driver, which has been finally ported to be proper HID
   driver by Jiri Slaby
 - ps3remote driver functionality is now provided by generic sony
   driver, by Jiri Kosina
 - PS2/3 Buzz controllers support, by Colin Leitner
 - rework of wiimote driver including full extensions hotpluggin
   support, sub-device modularization and speaker support by David
   Herrmann

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits)
  HID: wacom: Intuos4 battery charging changes
  HID: i2c-hid: support sending HID output reports using the output register
  HID: kye: Add report fixup for Genius Gila Gaming mouse
  HID: wiimote: support Nintendo Wii U Pro Controller
  Input: make gamepad API keycodes more clear
  input: document gamepad API and add extra keycodes
  HID: explain out-of-range check better
  HID: fix false positive out of range values
  HID: wiimote: fix coccinelle warnings
  HID: roccat: check cdev_add return value
  HID: fold ps3remote driver into generic Sony driver
  HID: hyperv: convert alloc+memcpy to memdup
  HID: core: fix reporting of raw events
  HID: wiimote: discard invalid EXT data reports
  HID: wiimote: fix classic controller parsing
  HID: wiimote: init EXT/MP during device detection
  HID: wiimote: fix DRM debug-attr to correctly parse input
  HID: wiimote: add MP quirks
  HID: wiimote: remove old static extension support
  HID: wiimote: add "bboard_calib" attribute
  ...

11 years agoMerge tag 'md-3.11' of git://neil.brown.name/md
Linus Torvalds [Thu, 4 Jul 2013 18:36:50 +0000 (11:36 -0700)]
Merge tag 'md-3.11' of git://neil.brown.name/md

Pull md updates from NeilBrown:
 "Mostly fixes, with a few minor features (eg 'last_sync_action' sysfs
  file)

  A couple marked for -stable including one recent bug which causes a
  RAID10 reshape to complete without moving any data :-(

  A couple more bugfixes (at least) to come, but haven't confirmed the
  right solution yet."

* tag 'md-3.11' of git://neil.brown.name/md:
  md/raid10: fix bug which causes all RAID10 reshapes to move no data.
  md/raid5: allow 5-device RAID6 to be reshaped to 4-device.
  md/raid10: fix two bugs affecting RAID10 reshape.
  md: remove doubled description for sync_max, merging it within sync_min/sync_max
  MD: Remember the last sync operation that was performed
  md: fix buglet in RAID5 -> RAID0 conversion.
  md/raid10: check In_sync flag in 'enough()'.
  md/raid10: locking changes for 'enough()'.
  md: replace strict_strto*() with kstrto*()
  md: Wait for md_check_recovery before attempting device removal.
  dm-raid: silence compiler warning on rebuilds_per_group.
  DM RAID: Fix raid_resume not reviving failed devices in all cases
  DM RAID: Break-up untidy function
  DM RAID: Add ability to restore transiently failed devices on resume

11 years agoMerge branch 'kconfig-diet' from Dave Hansen
Linus Torvalds [Thu, 4 Jul 2013 18:25:51 +0000 (11:25 -0700)]
Merge branch 'kconfig-diet' from Dave Hansen

Merge Kconfig menu diet patches from Dave Hansen:
 "I think the "Kernel Hacking" menu has gotten a bit out of hand.  It is
  over 120 lines long on my system with everything enabled and options
  are scattered around it haphazardly.

        http://sr71.net/~dave/linux/kconfig-horror.png

  Let's try to introduce some sanity.  This set takes that 120 lines
  down to 55 and makes it vastly easier to find some things.  It's a
  start.

  This set stands on its own, but there is plenty of room for follow-up
  patches.  The arch-specific debug options still end up getting stuck
  in the top-level "kernel hacking" menu.  OPTIMIZE_INLINING, for
  instance, could obviously go in to the "compiler options" menu, but
  the fact that it is defined in arch/ in a separate Kconfig file keeps
  it on its own for the moment.

  The Signed-off-by's in here look funky.  I changed employers while
  working on this set, so I have signoffs from both email addresses"

* emailed patches from Dave Hansen <dave@sr71.net>:
  hang and lockup detection menu
  kconfig: consolidate printk options
  group locking debugging options
  consolidate compilation option configs
  consolidate runtime testing configs
  order memory debugging Kconfig options
  consolidate per-arch stack overflow debugging options

11 years agohang and lockup detection menu
Dave Hansen [Mon, 1 Jul 2013 20:04:50 +0000 (13:04 -0700)]
hang and lockup detection menu

The hard/softlockup and hung-task entries take up 6 lines
of screen real-estate when enabled.  I bet folks don't
mess with these _that_ often, so move them in a group
down a level.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokconfig: consolidate printk options
Dave Hansen [Mon, 1 Jul 2013 20:04:49 +0000 (13:04 -0700)]
kconfig: consolidate printk options

Same deal, take the printk-related things and hide them in a menu.
This takes another 4 items out of the top-level menu.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agogroup locking debugging options
Dave Hansen [Mon, 1 Jul 2013 20:04:47 +0000 (13:04 -0700)]
group locking debugging options

Original posting:

http://lkml.kernel.org/r/20121214184208.D9E5804D@kernel.stglabs.ibm.com

There are quite a few of these, and we want to make sure that
there is one-stop-shopping for lock debugging.

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>