Marcel Ziswiler [Fri, 10 Oct 2014 15:31:41 +0000 (17:31 +0200)]
gpio: header file comment spelling fixes
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Fri, 10 Oct 2014 15:04:49 +0000 (17:04 +0200)]
tegra: colibri_t30: asix usb ethernet reset regression
Fix ASIX USB to Ethernet reset which due to the new driver model Tegra
GPIO driver changes now requires a label string to be provided
otherwise the reservation and subsequent direction/value calls will
fail.
This fixes a regression introduced by commit:
2fccd2d96badcdf6165658a99771a4c475586279
tegra: Convert tegra GPIO driver to use driver model
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Fri, 10 Oct 2014 14:56:50 +0000 (16:56 +0200)]
tegra: gpio: fix null label regression
Fix Tegra GPIO driver to not crash resp. misbehave upon requesting
GPIOs with an empty aka NULL label. As the driver uses exclusively the
label to check for reservation status actually supplying one is
mandatory!
This fixes a regression introduced by commit:
2fccd2d96badcdf6165658a99771a4c475586279
tegra: Convert tegra GPIO driver to use driver model
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Fri, 3 Oct 2014 23:48:53 +0000 (01:48 +0200)]
mmc: Tegra: Fix timeout issue seen on certain eMMC parts
During rigorous testing of our latest update infrastructure I came
across quite consistent timeouts on certain eMMC parts (e.g. Hynix
H26M21001ECR) when writing big (e.g. in excess of 400 MB) file system
images:
MMC write: dev # 0, block # 40960, count 944128 ...
mmc_send_cmd_bounced: MMC Timeout
Interrupt status 0x00000001
Interrupt status enable 0xdfff003b
Interrupt signal enable 0xdfff0002
Present status 0x01870106
mmc write failed
Comparing the various data sheets I came across the following timeout
specification:
Secure Erase/TRIM Timeout=300ms*2*10=6000ms
Unfortunately empirical testing still failed albeit much more rarely.
Increasing the timeout to 8000ms made it finally disappear entirely.
This patch allows us writing various eMMC parts without seeing any
further issues.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Tue, 26 Aug 2014 09:49:46 +0000 (11:49 +0200)]
arm: tegra: use architecture specific memcpy
Use architecture specific memcpy to speed up things.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Fri, 5 Sep 2014 08:18:38 +0000 (10:18 +0200)]
arm: tegra: initial support for apalis t30
This patch adds board support for the Toradex Apalis T30 a computer on
module which can be used on different carrier boards.
For the sake of ease of use we do not distinguish between different
carrier boards for now as the base module features are deemed
sufficient enough for regular booting.
The following functionality is working so far:
- eMMC boot and environment storage
- Gigabit Ethernet (once Thierry's PCIe as well as my E1000 resp. i210
fixes hit mainline)
- MMC/SD cards (both 8-bit as well as 4-bit slot)
- USB client/host (dual role port as client e.g. for DFU/UMS, other two
ports as host)
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Stephen Warren [Fri, 22 Aug 2014 21:04:08 +0000 (15:04 -0600)]
ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables
This pinmux tables currently omit any configuration for PCIe clk_req,
wake, and rst pins, which in turn causes intermittent failures in
U-Boot's PCIe support. Import an updated version of the pinmux tables
which rectifies this.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Albert ARIBAUD [Fri, 10 Oct 2014 23:20:55 +0000 (01:20 +0200)]
Merge branch 'u-boot-socfpga/topic/arm/socfpga-
20141010' into 'u-boot-arm/master'
Albert ARIBAUD [Fri, 10 Oct 2014 23:20:30 +0000 (01:20 +0200)]
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Marek Vasut [Thu, 9 Oct 2014 23:50:23 +0000 (01:50 +0200)]
arm: socfpga: Use EMAC1 on SoCDK
The SoCDK uses EMAC1, not EMAC0. This patch fixes the issue.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Pavel Machek [Thu, 9 Oct 2014 23:50:22 +0000 (01:50 +0200)]
arm: socfpga: add MAINTAINERS entry
Add MAINTAINERS entry.
Signed-off-by: Pavel Machek <pavel@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Heiko Schocher [Wed, 1 Oct 2014 05:26:06 +0000 (07:26 +0200)]
arm, at91: add generic board support for the taurus and corvus board
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Bo Shen [Wed, 24 Sep 2014 07:35:53 +0000 (15:35 +0800)]
ARM: atmel: switch at91sam9263ek to generic board
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Andreas Bießmann [Thu, 18 Sep 2014 21:46:49 +0000 (23:46 +0200)]
sama5d3xek: run PHY's config
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Andreas Bießmann [Thu, 18 Sep 2014 21:46:48 +0000 (23:46 +0200)]
macb: simplify gmac initialisation
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Tom Rini [Fri, 10 Oct 2014 13:45:16 +0000 (09:45 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
Tom Rini [Fri, 3 Oct 2014 19:57:00 +0000 (15:57 -0400)]
am335x_evm: Correct BOOTCOUNT driver support
We need to set the 'BE' flag here for things to work right.
Signed-off-by: Tom Rini <trini@ti.com>
Valentin Longchamp [Fri, 3 Oct 2014 09:16:19 +0000 (11:16 +0200)]
common/board_r: remove warning in initr_mem for 64-bit phys_size_t
Since on powerpc phys_size_t can be unsigned long long, this printout
line can result in a not nice compile warning.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: Simon Glass <sjg@chromium.org>
Hannes Petermaier [Fri, 3 Oct 2014 05:30:15 +0000 (07:30 +0200)]
board/BuR: fix pinmux for MII Ethernet Interface
The lines COL (collision detect) and CRS (carrier sense) needs to be connected
and muxed to the CPSW MAC for a proper function in half-duplex Mode of the
interface.
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
Cc: Tom Rini <trini@ti.com>
York Sun [Wed, 1 Oct 2014 15:44:55 +0000 (08:44 -0700)]
scripts/multiconfig.sh: Fix a typo
Fix the spelling of "configs".
Signed-off-by: York Sun <yorksun@freescale.com>
CC: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Jeroen Hofstee [Wed, 1 Oct 2014 15:22:58 +0000 (17:22 +0200)]
multiconfig.sh: replace GNU sed specific match
A SPL/TPL enabled target would was not recognized as
such by BSD sed, since it relies on a GNU extension.
Instead of or-ing just spell out both matches.
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
David Müller (ELSOFT AG) [Tue, 30 Sep 2014 11:53:28 +0000 (13:53 +0200)]
VCMA9: remove EXT2 support
remove the seldomly used EXT2 support because the U-Boot binary will
not fit into the 512KiB flash otherwise.
Signed-off-by: David Müller <d.mueller@elsoft.ch>
David Müller (ELSOFT AG) [Tue, 30 Sep 2014 11:23:54 +0000 (13:23 +0200)]
PATI: fix broken SPI access
fix broken SPI access by adding/activating BOARD_EARLY_INIT_F
functionality and calling spi_init_f() from there.
Signed-off-by: David Müller <d.mueller@elsoft.ch>
David Müller (ELSOFT AG) [Tue, 30 Sep 2014 10:32:23 +0000 (12:32 +0200)]
PATI: convert to generic board
Signed-off-by: David Müller <d.mueller@elsoft.ch>
David Müller (ELSOFT AG) [Tue, 30 Sep 2014 10:32:22 +0000 (12:32 +0200)]
VCMA9: convert to generic board
Signed-off-by: David Müller <d.mueller@elsoft.ch>
David Müller (ELSOFT AG) [Tue, 30 Sep 2014 10:32:21 +0000 (12:32 +0200)]
MIP405: convert to generic board
Signed-off-by: David Müller <d.mueller@elsoft.ch>
David Müller (ELSOFT AG) [Tue, 30 Sep 2014 10:32:20 +0000 (12:32 +0200)]
PIP405: convert to generic board
Signed-off-by: David Müller <d.mueller@elsoft.ch>
Wolfgang Denk [Tue, 30 Sep 2014 08:44:01 +0000 (10:44 +0200)]
SPDX License cleanup for LiMon imported files
A number of network related files were imported from the LiMon
project; these contain a somewhat unclear license statement:
Copyright 1994 - 2000 Neil Russell.
(See License)
I analyzed the source code of LiMon v1.4.2 which was used for this
import. It does not contain any "License" file, but the top level
directory contains a file "COPYING", which turns out to be GPL v2
of June 1991. So it is legitimate to conclude that the LiMon derived
files are also to be released under GPLv2. Mark them as such.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Alexander Kochetkov [Mon, 29 Sep 2014 17:46:48 +0000 (21:46 +0400)]
beagleboard: Remove side effects of i2c2 pullup resisters initialization code
Fix typo of commit
d4e53f063dd25e071444b87303573e7440deeb89.
i2c2 pullup resisters are controlled by bit 0 of CONTROL_PROG_IO1.
It's value after reset is 0x00100001.
In order to clear bit 0, original code write 0xfffffffe to
CONTROL_PROG_IO1 and toggle almost all default values.
Original code affect following:
* disable i2c1 pullup resisters
* increase far end load setting for many modules
* setup invalid SC/LB combination
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
CC: Tom Rini <trini@ti.com>
CC: Steve Kipisz <s-kipisz2@ti.com>
Masahiro Yamada [Sun, 28 Sep 2014 16:38:01 +0000 (01:38 +0900)]
powerpc: mpc5xxx: remove board support for MVBC_P and MVSMR
These boards have been orphaned for more than 6 months.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Sun, 28 Sep 2014 16:38:00 +0000 (01:38 +0900)]
powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7
These boards have been orphaned for more than 6 months.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Sun, 28 Sep 2014 16:37:59 +0000 (01:37 +0900)]
powerpc: ppc4xx: remove board support for bluestone
This board has been orphaned for more than 6 months.
It is the last board defining CONFIG_APM821XX.
The code inside #ifdef CONFIG_APM821XX should be removed too.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Sun, 28 Sep 2014 16:37:58 +0000 (01:37 +0900)]
powerpc: ppc4xx: remove board support for CRAYL1
This board has been orphaned for more than 6 months.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Sun, 28 Sep 2014 16:37:57 +0000 (01:37 +0900)]
powerpc: ppc4xx: remove board support for KAREF and METROBOX
These boards have been orphaned for more than 6 months.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Fri, 26 Sep 2014 09:42:36 +0000 (18:42 +0900)]
kconfig: fix another bug of "make savedefconfig"
In some cases, the last lines of SPL or TPL are not output to a file.
The entries remaining in the "unmatched" variable must be flushed.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Khoronzhuk, Ivan [Tue, 23 Sep 2014 18:10:26 +0000 (21:10 +0300)]
ARM: keystone: clock: fix main pll ratio div definitions
The definitions for div ratio supposed to be in hex and were added
in dec by mistake.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Roger Quadros [Tue, 23 Sep 2014 15:07:04 +0000 (18:07 +0300)]
common: spl_sata: perform SCSI scan before getting device
At least on OMAP, init_sata() no longer performs scsi_scan()
so we must do it explicitly here.
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Roger Quadros [Tue, 23 Sep 2014 15:07:03 +0000 (18:07 +0300)]
ARM: OMAP5+: sata: Move scsi_scan() to the right place
scsi_scan() must be called as part of scsi_init() and not
as part of sata_init().
Signed-off-by: Roger Quadros <rogerq@ti.com>
Roger Quadros [Tue, 23 Sep 2014 15:07:02 +0000 (18:07 +0300)]
OMAP5+: sata/scsi: Implement scsi_init()
On OMAP platforms, SATA controller provides the SCSI subsystem
so implement scsi_init().
Get rid of the unnecessary sata_init() call from dra7xx-evm
and omap5-uevm board files.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Roger Quadros [Tue, 23 Sep 2014 15:07:01 +0000 (18:07 +0300)]
ahci: Don't start command DMA engine before buffers are set
The DMA/FIS buffers are set in ahci_port_start() which is called
after ahci_host_init(). So don't start the DMA engine here
(i.e. don't set FIS_RX)
This fixes the following error at kernel boot on OMAP platforms (e.g. DRA7x)
WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x260/0x358()
44000000.ocp:L3 Custom Error: MASTER SATA TARGET GPMC (Idle): Data Access in User mode during Functional access
Signed-off-by: Roger Quadros <rogerq@ti.com>
Stefan Herbrechtsmeier [Tue, 16 Sep 2014 15:51:05 +0000 (17:51 +0200)]
omap3: overo: Fix fdtfile test
Commit
12cc54376768461533b55ada1b0b6d4979f40579 'omap3: overo: Select
fdtfile for expansion board' wrongly missed the operator in the fdtfile
test. Update the test to only overwrite an empty fdtfile environment
variable.
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
York Sun [Thu, 2 Oct 2014 22:20:10 +0000 (15:20 -0700)]
common/board_r: Fix booting issue on T4240QDS
Commit
294b91a5817147d4b7f47be2ac69bac2a1f26491 moved initr_malloc
earlier than initr_unlock_ram_in_cache. This causes issue on T4240.
It may be related to locked L1 d-cache and unlocked L2 cache. D-
cache could and should be unlock earlier for normal operation.
This patch moves initr_unlock_ram_in_cache before initr_malloc. It
has been verified on the following boards, in which only T4240QDS
suffered and has been since fixed: T4240QDS, T2080QDS, P5040DS,
P4080DS, MPC8572DS, MPC8536DS, MPC8641HPCN, B4860QDS.
Signed-off-by: York Sun <yorksun@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Ian Campbell [Fri, 3 Oct 2014 13:29:01 +0000 (14:29 +0100)]
pxe: Ensure we don't overflow bootargs
On a couple of platforms I've tripped over long PXE append lines overflowing
this array, due to having CONFIG_SYS_CBSIZE == 256. When doing preseeded Debian
installs it's pretty trivial to exceed that.
Since the symptom can be a silent hang or a crash add a check. Of course the
affected boards would also need an increased CBSIZE to actually work.
Note that due to the printing of the final bootargs string CONFIG_SYS_PBSIZE
also needs to be sufficiently large.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[trini: Use %zd not %d in printf for all args]
Signed-off-by: Tom Rini <trini@ti.com>
Albert ARIBAUD [Fri, 10 Oct 2014 06:56:01 +0000 (08:56 +0200)]
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Masahiro Yamada [Fri, 3 Oct 2014 11:03:04 +0000 (20:03 +0900)]
mtd: denali: support NAND_CMD_RNDOUT command
The function nand_flash_detect_ext_param_page() requires
NAND_CMD_RNDOUT command supported. It is necessary to detect some
types of ONFi-compliant devices. Without it, the error message
"unsupported command received 0x5" is shown.
Let's support this command on the Denali NAND controller driver.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Chin Liang See <clsee@altera.com>
Masahiro Yamada [Fri, 3 Oct 2014 11:03:03 +0000 (20:03 +0900)]
mtd: denali: fix NAND_CMD_PARAM command
NAND_CMD_PARAM (0xEC) command is not working on the Denali
NAND controller driver.
Unlike NAND_CMD_READID (0x90), when the NAND_CMD_PARAM command
is followed by an address cycle, the target device goes busy.
(R/B# is deasserted)
Wait until the parameter data are ready.
In addition, unnecessary clear_interrupts() should be removed.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Chin Liang See <clsee@altera.com>
Nikita Kiryanov [Wed, 17 Sep 2014 12:59:25 +0000 (15:59 +0300)]
compulab: eeprom: add default eeprom bus
Add default eeprom bus setting.
This addresses the trimslice compile error that was introduced
with the addition of this setting.
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Nobuhiro Iwamatsu [Thu, 7 Aug 2014 23:44:02 +0000 (08:44 +0900)]
arm: rmobile: r8a7794: Skip initialize L2 cache
rmobile/lowlevel_init_ca15.S are common in r8a7790, r8a7791 and r8a7794 of
rmobile SoCs. The initialize L2 cache in lowlevel_init_ca15.S only needed
for Cortex-A15. The r8a7794 is Cortex-A7, not Cortex-A15.
This adds Skip to initialize L2 cache when r8a7794.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Nobuhiro Iwamatsu [Thu, 7 Aug 2014 23:41:15 +0000 (08:41 +0900)]
arm: rmobile: r8a7791: Fix initialize L2 cache
rmobile/lowlevel_init_ca15.S are common in r8a7790 and r8a7791 of
rmobile SoC. But L2 cache of r8a7791 does not use L2CTLR[5].
This adds fix to set L2CTLR [5] only when the r8a7790.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Nobuhiro Iwamatsu [Thu, 7 Aug 2014 00:10:45 +0000 (09:10 +0900)]
arm: rmobile: Remove unnecessary initialization for l2ctlr
This removes duplicate initialization of l2ctlr.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Nobuhiro Iwamatsu [Wed, 30 Jul 2014 03:28:00 +0000 (12:28 +0900)]
arm: rmobile: lager: Fix CPU frequency setting
Setting to change the CPU frequency is only used version2.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Nobuhiro Iwamatsu [Tue, 29 Jul 2014 03:14:05 +0000 (12:14 +0900)]
arm: rmobile: lager: Add Qos setting for ES2
This adds support version 0.963 for ES2 of lager board.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Nobuhiro Iwamatsu [Tue, 29 Jul 2014 03:13:16 +0000 (12:13 +0900)]
arm: rmobile: lager: Update Qos setting to version 0.955
This updates QoS version 0.955 for ES1 of lager board.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Nobuhiro Iwamatsu [Thu, 24 Jul 2014 06:30:32 +0000 (15:30 +0900)]
arm: rmobile: alt: Update QoS initialization to version 0.11
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Nobuhiro Iwamatsu [Thu, 24 Jul 2014 06:28:04 +0000 (15:28 +0900)]
arm: rmobile: koelsch: Update QoS initialization to version 0.334
This update QoS version 0.334 for ES2 of R8A7791.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Nobuhiro Iwamatsu [Sun, 27 Jul 2014 23:35:05 +0000 (08:35 +0900)]
arm: rmobile: koelsch: Add CONFIG_SCIF_USE_EXT_CLK
SCIF of koelsch use external clock mode.
This enables external clock mode on koelsch board.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Nobuhiro Iwamatsu [Sun, 27 Jul 2014 23:35:05 +0000 (08:35 +0900)]
arm: rmobile: lager: Add CONFIG_SCIF_USE_EXT_CLK
SCIF of lager use external clock mode.
This enables external clock mode on lager board.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Nobuhiro Iwamatsu [Sun, 27 Jul 2014 23:11:21 +0000 (08:11 +0900)]
arm: rmobile: lager: Fix value of CONFIG_SH_SCIF_CLK_FREQ
The clock of SCIF (serial port) of lager is supplied from External
Clock. And value of clock is 14.7456MHz.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Albert ARIBAUD [Wed, 8 Oct 2014 19:20:49 +0000 (21:20 +0200)]
Merge remote-tracking branch 'u-boot-imx/master'
The single file conflict below is actually trivial.
Conflicts:
board/boundary/nitrogen6x/nitrogen6x.c
Hans de Goede [Tue, 30 Sep 2014 16:45:32 +0000 (18:45 +0200)]
sunxi: Fix gmac not working reliable on the Bananapi
In order for the gmac nic to work reliable on the Bananapi, we need to set
bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain" of the GMAC clk register
(0x01c20164) to 3.
Without this about 9 out of 10 ethernet packets get lost, with this setting
there is no packet loss.
So far setting these bits is only necessary on the Bananapi, so this commit
solves this with a bit of #ifdef CONFIG_BANANAPI code. If in the future we
need to do something similar for other boards, we can create a specific
CONFIG_FOO option for this then.
Reported-by: Karsten Merker <merker@debian.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Karsten Merker <merker@debian.org>
Tested-by: Zoltan HERPAI <wigyori@openwrt.org>
Tested-by: Tony Zhang <tony.zhang@lemaker.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Przemyslaw Marczak [Tue, 23 Sep 2014 10:46:43 +0000 (12:46 +0200)]
odroid: clock: set aclk_cores to 200MHz
This change fixes suspend/resume issue in the kernel caused
by the wrong 'aclk_cores' clock value expected by the kernel.
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Masahiro Yamada [Fri, 26 Sep 2014 09:54:43 +0000 (18:54 +0900)]
exynos: update maintainer of Snow and SMDK5420 board
The email address of Rajeshwari Shinde <rajeshwari.s@samsung.com>
is not working.
This commit gives Akshay the maintainership of Snow and
SMDK5420 boards.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Robert Baldyga [Fri, 19 Sep 2014 10:17:55 +0000 (12:17 +0200)]
armv7: s5pc1xx: improve cache handling
Move cache handling code to C file, and add enable_caches() and
disable_caches() functions.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:52 +0000 (22:01 -0600)]
exynos: Enable pre-relocation malloc()
Enable this feature to support driver model before relocation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:51 +0000 (22:01 -0600)]
samsung: Enable device tree for smdkc100
Change this board to add a device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:50 +0000 (22:01 -0600)]
samsung: Enable device tree for s5p_goni
Change this board to add a device tree.
This also adds a pinmux header file although it is not used as yet.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:49 +0000 (22:01 -0600)]
config: Move smdkv310 to use common exynos4 file
Most of the smdkv310 features are common with other exynos4 boards. To
permit easier addition of driver model support, use the common file and
add a device tree file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:48 +0000 (22:01 -0600)]
config: Move arndale to use common exynos5250 file
Most of the arndale features are common with other exynos5250 boards. To
permit easier addition of driver model support, use the common file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:47 +0000 (22:01 -0600)]
exynos: config: Move cros_ec and tps65090 out of smdk boards
These boards do not in fact have a Chrome OS EC, nor a TPS565090 PMIC, so
move the settings into a separate common file to be used by those that need
it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:46 +0000 (22:01 -0600)]
exynos: Move common smdk5420 things to common file
A few things are common but are not in the common file. Fix this and
rename the file to fit with the other exynos*-common files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:45 +0000 (22:01 -0600)]
exynos: Move common exynos settings into a common file
Since exynos4 and exyno5 share many settings, we should move these into
a common file to avoid duplication.
In effect the changes are that all exynos boards now have EXT4 and FAT
write support. This affects exynos5250 and exynos5420 which previously
did not. This also disables the ext2 commands which are equivalent to
ext4 anyway.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:44 +0000 (22:01 -0600)]
exynos: Rename -dt config files to -common
We want exynos5250-dt.h to be a board which can support any exynos5250
device. This matches the naming used by Linux. As a first step, rename
the existing -dt files to -common to make it clear they are common files,
and not specific boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:43 +0000 (22:01 -0600)]
exynos: dts: Add device tree node for cros_ec keyboard
Add a keyboard definition so that the keyboard can be used on pit.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:42 +0000 (22:01 -0600)]
dm: exynos: Split out the cros_ec drivers
With the driver model conversion we are going to be using driver model for
SPI and not for I2C. This works OK so long as a board doesn't need both
dm and non-dm versions of the cros_ec driver. Since pit uses SPI and snow
uses I2C we need to split the configs so that only one driver is compiled
for each platform.
We can fix this later when driver model supports I2C.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:41 +0000 (22:01 -0600)]
cros_ec: exynos: Use the correct tps65090 driver in each case
Exynos 5250 boards (snow, spring) use the I2C driver but Exynos 5420 boards
cannot due to a hardware design decision. Select the correct driver to use
in each case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:40 +0000 (22:01 -0600)]
cros_ec: power: Add a tunnelled version of the tps65090 driver
Unfortunately on Pit the AP has no direct access to the tps65090 but must
talk through the EC (over SPI) to the EC's I2C bus.
When driver model supports PMICs this will be relatively easy. In the
meantime the best approach is to duplicate the driver. It will be refactored
once driver model support is expanded.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:39 +0000 (22:01 -0600)]
exynos5: Enable data cache
Things run faster when the data cache is enabled, so turn it on along with
the 'dcache' command.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Simon Glass [Wed, 8 Oct 2014 04:01:38 +0000 (22:01 -0600)]
Exynos: Use 900MHz ARM frequency in SPL for peach_pit
The device seems to hang in SPL if the full speed is used when booting from
USB, perhaps because the PMIC has not been set to the maximum ARM core
voltage yet. Slow it down to a reliable speed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Tom Rini [Tue, 7 Oct 2014 11:38:39 +0000 (07:38 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
Anthony Felice [Sat, 6 Sep 2014 17:47:06 +0000 (19:47 +0200)]
vf610twr: Tune DDR initialization settings
Removed settings in unsupported register fields. They didn’t
do anything, and in most cases, were not documented in the
reference manual.
Changed register settings to comply with JEDEC required values.
Changed timing parameters because they included full clock
periods that were doing nothing.
Signed-off-by: Anthony Felice <tony.felice@timesys.com>
[rebased on v2014.10-rc2]
Signed-off-by: Stefan Agner <stefan@agner.ch>
Minkyu Kang [Tue, 7 Oct 2014 10:14:03 +0000 (19:14 +0900)]
Merge branch 'uboot'
Minkyu Kang [Tue, 7 Oct 2014 10:13:52 +0000 (19:13 +0900)]
Merge branch 'master' of git.denx.de/u-boot-samsung
Albert ARIBAUD [Tue, 7 Oct 2014 10:11:32 +0000 (12:11 +0200)]
Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master'
Tom Rini [Tue, 7 Oct 2014 00:23:09 +0000 (20:23 -0400)]
Prepare v2014.10-rc3
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Mon, 6 Oct 2014 19:49:50 +0000 (15:49 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Tom Rini [Mon, 6 Oct 2014 19:17:13 +0000 (15:17 -0400)]
Merge branch 'topic/arm/socfpga-
20141006' of git://git.denx.de/u-boot-socfpga
Fix a trivial conflict in dw_mmc.c after talking with Marek.
Conflicts:
drivers/mmc/dw_mmc.c
Signed-off-by: Tom Rini <trini@ti.com>
Eric Nelson [Wed, 1 Oct 2014 21:30:56 +0000 (14:30 -0700)]
usb: gadget: fastboot: terminate commands with NULL
Without NULL termination, various commands will read past the
end of input. In particular, this was noticed with error()
calls in cb_getvar and simple_strtoul() in cb_download.
Since the download callback happens elsewhere, the 4k buffer
should always be sufficient to handle command arguments.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Daniel Mack [Tue, 22 Jul 2014 10:47:02 +0000 (12:47 +0200)]
usb: musb-new: core: set MUSB_POWER_HSENAB in MUSB_POWER for host mode
This bit allows the MUSB controller to negotiate for high-speed mode when
the device is reset by the hub. If unset, Babble errors occur with
high-speed mass storage devices right after the first packet. This condition
is not caught by the interrupt handles in U-Boot, so no recovery is done,
and the USB communication is stuck.
To fix this, set the bit unconditionally, not only for
CONFIG_USB_GADGET_DUALSPEED but also for host-only modes.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Kevin Mihelich [Thu, 2 Oct 2014 19:16:53 +0000 (12:16 -0700)]
nitrogen6x: config: enable EXT4 filesystem
Support reading/writing ext4 partitions.
Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Eric Nelson [Thu, 2 Oct 2014 19:16:52 +0000 (12:16 -0700)]
nitrogen6x: config: enable Android fastboot
Enable 'fastboot' command.
This is currently enabled but not yet functional. Including it in the
configuration will ease further testing and development as discussed
on the mailing list.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Eric Nelson [Thu, 2 Oct 2014 19:16:51 +0000 (12:16 -0700)]
nitrogen6x: config: add gpio command
Enable the 'gpio' command to allow reading and toggling of GPIO
pins.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Eric Nelson [Thu, 2 Oct 2014 19:16:49 +0000 (12:16 -0700)]
nitrogen6x: config: disable logo
Some users (QNX and Windows CE users in particular) have asked
to disable the Penguin shown on the display at boot time.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Troy Kisky [Thu, 2 Oct 2014 19:16:48 +0000 (12:16 -0700)]
nitrogen6x: config: allow more bootargs parameters
Increase the maximum number of arguments allowed by the Hush parser.
This prevents errors when users or scripts aren't quoting parameters
when setting the "bootargs" variable et al.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Eric Nelson [Thu, 2 Oct 2014 19:16:47 +0000 (12:16 -0700)]
nitrogen6x: config: enable "i2c edid"
Enable the "i2c edid" command to query data from an attached
HDMI monitor.
Usage is typically this:
U-Boot > i2c dev 1
U-Boot > i2c edid 0x50
...
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Eric Nelson [Thu, 2 Oct 2014 19:16:46 +0000 (12:16 -0700)]
nitrogen6x: config: add CONFIG_CMD_MEMTEST
Enable the 'mtest' command on Nitrogen6x and SABRE Lite boards.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Eric Nelson [Thu, 2 Oct 2014 19:16:45 +0000 (12:16 -0700)]
nitrogen6x: config: enable USB keyboard support
Enable the use of USB keyboards on SABRE Lite and Nitrogen6x boards.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Eric Nelson [Thu, 2 Oct 2014 19:16:44 +0000 (12:16 -0700)]
nitrogen6x: config: expose SATA, then MMC over USB
If no boot script was found, expose internal storage over the
USB mass storage gadget to allow easy programming.
This is especially useful when SD cards are inaccessible or when
loading SATA drives.
More details are available in this blog post:
http://boundarydevices.com/u-boot-usb-mass-storage-gadget/
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Eric Nelson [Thu, 2 Oct 2014 19:16:43 +0000 (12:16 -0700)]
nitrogen6x: config: add initrd_high
Support RAM disks by setting initrd_high. See commit 7e9603e
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Kevin Mihelich [Thu, 2 Oct 2014 19:16:42 +0000 (12:16 -0700)]
nitrogen6x: config: use FS_GENERIC load command
Remove the individual attempts to load using ext2 and fat, replace with the
generic load command supporting available filesystem types.
Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
Diego Rondini [Thu, 2 Oct 2014 19:16:41 +0000 (12:16 -0700)]
nitrogen6x: config: allow boot to USB stick
This patch enables boot to USB storage devices by expanding on the list
of boot devices.
Because the USB startup currently takes a long time, it places USB at
the end of the list of supported devices.
You can over-ride the boot order using the bootdevs environment variable.
For instance, this will make USB the first (highest priority) device:
U-Boot > setenv bootdevs usb mmc sata
U-Boot > saveenv
Signed-off-by: Diego Rondini <diego.rondini@kynetics.it>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>