ALSA: Use del_timer_sync() before freeing timer

commit f0a868788fcbf63cdab51f5adcf73b271ede8164 upstream.

The current code for freeing the emux timer is extremely dangerous:

  CPU0 CPU1
  ---- ----
snd_emux_timer_callback()
    snd_emux_free()
      spin_lock(&emu->voice_lock)
      del_timer(&emu->tlist); <-- returns immediately
      spin_unlock(&emu->voice_lock);
      [..]
      kfree(emu);

  spin_lock(&emu->voice_lock);

 [BOOM!]

Instead just use del_timer_sync() which will wait for the timer to finish
before continuing. No need to check if the timer is active or not when
doing so.

This doesn't fix the race of a possible re-arming of the timer, but at
least it won't use the data that has just been freed.

[ Fixed unused variable warning by tiwai ]

Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221026231236.6834b551@gandalf.local.home
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: Fix possible completions during init_completion

commit 2871edb32f4622c3a25ce4b3977bad9050b91974 upstream.

kvaser_usb uses completions to signal when a response event is received
for outgoing commands.

However, it uses init_completion() to reinitialize the start_comp and
stop_comp completions before sending the start/stop commands.

In case the device sends the corresponding response just before the
actual command is sent, complete() may be called concurrently with
init_completion() which is not safe.

This might be triggerable even with a properly functioning device by
stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which
also causes the driver to send CMD_STOP_CHIP when restart-ms is off),
but that was not tested.

Fix the issue by using reinit_completion() instead.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb()

commit c3c06c61890da80494bb196f75d89b791adda87f upstream.

It is not allowed to call kfree_skb() from hardware interrupt context
or with interrupts being disabled. The skb is unlinked from the queue,
so it can be freed after spin_unlock_irqrestore().

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20221027091237.2290111-1-yangyingliang@huawei.com
Cc: stable@vger.kernel.org
[mkl: adjust subject]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Add an fattr allocation to _nfs4_discover_trunking()

commit 4f40a5b5544618b096d1611a18219dd91fd57f80 upstream.

This was missed in c3ed222745d9 ("NFSv4: Fix free of uninitialized
nfs4_label on referral lookup.") and causes a panic when mounting
with '-o trunkdiscovery':

PID: 1604   TASK: ffff93dac3520000  CPU: 3   COMMAND: "mount.nfs"
 #0 [ffffb79140f738f8] machine_kexec at ffffffffaec64bee
 #1 [ffffb79140f73950] __crash_kexec at ffffffffaeda67fd
 #2 [ffffb79140f73a18] crash_kexec at ffffffffaeda76ed
 #3 [ffffb79140f73a30] oops_end at ffffffffaec2658d
 #4 [ffffb79140f73a50] general_protection at ffffffffaf60111e
    [exception RIP: nfs_fattr_init+0x5]
    RIP: ffffffffc0c18265  RSP: ffffb79140f73b08  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff93dac304a800  RCX: 0000000000000000
    RDX: ffffb79140f73bb0  RSI: ffff93dadc8cbb40  RDI: d03ee11cfaf6bd50
    RBP: ffffb79140f73be8   R8: ffffffffc0691560   R9: 0000000000000006
    R10: ffff93db3ffd3df8  R11: 0000000000000000  R12: ffff93dac4040000
    R13: ffff93dac2848e00  R14: ffffb79140f73b60  R15: ffffb79140f73b30
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #5 [ffffb79140f73b08] _nfs41_proc_get_locations at ffffffffc0c73d53 [nfsv4]
 #6 [ffffb79140f73bf0] nfs4_proc_get_locations at ffffffffc0c83e90 [nfsv4]
 #7 [ffffb79140f73c60] nfs4_discover_trunking at ffffffffc0c83fb7 [nfsv4]
 #8 [ffffb79140f73cd8] nfs_probe_fsinfo at ffffffffc0c0f95f [nfs]
 #9 [ffffb79140f73da0] nfs_probe_server at ffffffffc0c1026a [nfs]
    RIP: 00007f6254fce26e  RSP: 00007ffc69496ac8  RFLAGS: 00000246
    RAX: ffffffffffffffda  RBX: 0000000000000000  RCX: 00007f6254fce26e
    RDX: 00005600220a82a0  RSI: 00005600220a64d0  RDI: 00005600220a6520
    RBP: 00007ffc69496c50   R8: 00005600220a8710   R9: 003035322e323231
    R10: 0000000000000000  R11: 0000000000000246  R12: 00007ffc69496c50
    R13: 00005600220a8440  R14: 0000000000000010  R15: 0000560020650ef9
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

Fixes: c3ed222745d9 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Fix free of uninitialized nfs4_label on referral lookup.

commit c3ed222745d9ad7b69299b349a64ba533c64a34f upstream.

Send along the already-allocated fattr along with nfs4_fs_locations, and
drop the memcpy of fattr.  We end up growing two more allocations, but this
fixes up a crash as:

PID: 790    TASK: ffff88811b43c000  CPU: 0   COMMAND: "ls"
 #0 [ffffc90000857920] panic at ffffffff81b9bfde
 #1 [ffffc900008579c0] do_trap at ffffffff81023a9b
 #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78
 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45
 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de
 #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs]
 #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f
 #7 [ffffc90000857c60] walk_component at ffffffff813a86c4
 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553
 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b

Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 9558a007dbc3 ("NFS: Remove the label from the nfs4_lookup_res struct")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.76

Link: https://lore.kernel.org/r/20221027165054.917467648@linuxfoundation.org
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>=20
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20221028120302.594918388@linuxfoundation.org
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>=20
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: /proc/pid/smaps_rollup: fix no vma's null-deref

Commit 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value
seq_file") introduced a null-deref if there are no vma's in the task in
show_smaps_rollup.

Fixes: 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value seq_file")
Signed-off-by: Seth Jenkins <sethjenkins@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Add SD card quirk for broken discard

commit 07d2872bf4c864eb83d034263c155746a2fb7a3b upstream.

Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports
discard, while they actually don't. This might cause mk2fs to fail while
trying to format the card and revert it to a read-only mode.

To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD)
to indicate that we shall fall-back to use the legacy erase command
instead.

Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com
[Ulf: Updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Makefile.debug: re-enable debug info for .S files

This is _not_ an upstream commit and just for 5.15.y only. It is based
on commit 32ef9e5054ec0321b9336058c58ec749e9c6b0fe upstream.

Alexey reported that the fraction of unknown filename instances in
kallsyms grew from ~0.3% to ~10% recently; Bill and Greg tracked it down
to assembler defined symbols, which regressed as a result of:

commit b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1")

In that commit, I allude to restoring debug info for assembler defined
symbols in a follow up patch, but it seems I forgot to do so in

commit a66049e2cf0e ("Kbuild: make DWARF version a choice")

Fixes: b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1")
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB

commit 33806e7cb8d50379f55c3e8f335e91e1b359dc7b upstream.

A recent change in LLVM made CONFIG_EFI_STUB unselectable because it no
longer pretends to support -mabi=ms, breaking the dependency in
Kconfig. Lack of CONFIG_EFI_STUB can prevent kernels from booting via
EFI in certain circumstances.

This check was added by

  8f24f8c2fc82 ("efi/libstub: Annotate firmware routines as __efiapi")

to ensure that __attribute__((ms_abi)) was available, as -mabi=ms is
not actually used in any cflags.

According to the GCC documentation, this attribute has been supported
since GCC 4.4.7. The kernel currently requires GCC 5.1 so this check is
not necessary; even when that change landed in 5.6, the kernel required
GCC 4.9 so it was unnecessary then as well.

Clang supports __attribute__((ms_abi)) for all versions that are
supported for building the kernel so no additional check is needed.
Remove the 'depends on' line altogether to allow CONFIG_EFI_STUB to be
selected when CONFIG_EFI is enabled, regardless of compiler.

Fixes: 8f24f8c2fc82 ("efi/libstub: Annotate firmware routines as __efiapi")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/d1ad006a8f64bdc17f618deffa9e7c91d82c444d
[nathan: Fix conflict due to lack of c6dbd3e5e69c in older trees]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: video: Force backlight native for more TongFang devices

commit 3dbc80a3e4c55c4a5b89ef207bed7b7de36157b4 upstream.

This commit is very different from the upstream commit! It fixes the same
issue by adding more quirks, rather then the general fix from the 6.1
kernel, because the general fix from the 6.1 kernel is part of a larger
refactoring of the backlight code which is not suitable for the stable
series.

As described in "ACPI: video: Drop NL5x?U, PF4NU1F and PF5?U??
acpi_backlight=native quirks" (10212754a0d2) the upstream commit "ACPI:
video: Make backlight class device registration a separate step (v2)"
(3dbc80a3e4c5) makes these quirks unnecessary. However as mentioned in this
bugtracker ticket https://bugzilla.kernel.org/show_bug.cgi?id=215683#c17
the upstream fix is part of a larger patchset that is overall too complex
for stable.

The TongFang GKxNRxx, GMxNGxx, GMxZGxx, and GMxRGxx / TUXEDO
Stellaris/Polaris Gen 1-4, have the same problem as the Clevo NL5xRU and
NL5xNU / TUXEDO Aura 15 Gen1 and Gen2:
They have a working native and video interface for screen backlight.
However the default detection mechanism first registers the video interface
before unregistering it again and switching to the native interface during
boot. This results in a dangling SBIOS request for backlight change for
some reason, causing the backlight to switch to ~2% once per boot on the
first power cord connect or disconnect event. Setting the native interface
explicitly circumvents this buggy behaviour by avoiding the unregistering
process.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Skip and warn on unknown format 'configN' attrs

[ Upstream commit e552b7be12ed62357df84392efa525ecb01910fb ]

If the kernel exposes a new perf_event_attr field in a format attr, perf
will return an error stating the specified PMU can't be found. For
example, a format attr with 'config3:0-63' causes an error as config3 is
unknown to perf. This causes a compatibility issue between a newer
kernel with older perf tool.

Before this change with a kernel adding 'config3' I get:

  $ perf record -e arm_spe// -- true
  event syntax error: 'arm_spe//'
                       \___ Cannot find PMU `arm_spe'. Missing kernel support?
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list
  available events

After this change, I get:

  $ perf record -e arm_spe// -- true
  WARNING: 'arm_spe_0' format 'inv_event_filter' requires 'perf_event_attr::config3' which is not supported by this version of perf!
  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.091 MB perf.data ]

To support unknown configN formats, rework the YACC implementation to
pass any config[0-9]+ format to perf_pmu__new_format() to handle with a
warning.

Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220914-arm-perf-tool-spe1-2-v2-v4-1-83c098e6212e@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-tegra: Use actual clock rate for SW tuning correction

[ Upstream commit b78870e7f41534cc719c295d1f8809aca93aeeab ]

Ensure tegra_host member "curr_clk_rate" holds the actual clock rate
instead of requested clock rate for proper use during tuning correction
algorithm. Actual clk rate may not be the same as the requested clk
frequency depending on the parent clock source set. Tuning correction
algorithm depends on certain parameters which are sensitive to current
clk rate. If the host clk is selected instead of the actual clock rate,
tuning correction algorithm may end up applying invalid correction,
which could result in errors

Fixes: ea8fc5953e8b ("mmc: tegra: update hw tuning process")
Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221006130622.22900-4-pshete@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Do not free snapshot if tracer is on cmdline

[ Upstream commit a541a9559bb0a8ecc434de01d3e4826c32e8bb53 ]

The ftrace_boot_snapshot and alloc_snapshot cmdline options allocate the
snapshot buffer at boot up for use later. The ftrace_boot_snapshot in
particular requires the snapshot to be allocated because it will take a
snapshot at the end of boot up allowing to see the traces that happened
during boot so that it's not lost when user space takes over.

When a tracer is registered (started) there's a path that checks if it
requires the snapshot buffer or not, and if it does not and it was
allocated it will do a synchronization and free the snapshot buffer.

This is only required if the previous tracer was using it for "max
latency" snapshots, as it needs to make sure all max snapshots are
complete before freeing. But this is only needed if the previous tracer
was using the snapshot buffer for latency (like irqoff tracer and
friends). But it does not make sense to free it, if the previous tracer
was not using it, and the snapshot was allocated by the cmdline
parameters. This basically takes away the point of allocating it in the
first place!

Note, the allocated snapshot worked fine for just trace events, but fails
when a tracer is enabled on the cmdline.

Further investigation, this goes back even further and it does not require
a tracer on the cmdline to fail. Simply enable snapshots and then enable a
tracer, and it will remove the snapshot.

Link: https://lkml.kernel.org/r/20221005113757.041df7fe@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 45ad21ca5530 ("tracing: Have trace_array keep track if snapshot buffer is allocated")
Reported-by: Ross Zwisler <zwisler@kernel.org>
Tested-by: Ross Zwisler <zwisler@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Simplify conditional compilation code in tracing_set_tracer()

[ Upstream commit f4b0d318097e45cbac5e14976f8bb56aa2cef504 ]

Two conditional compilation directives "#ifdef CONFIG_TRACER_MAX_TRACE"
are used consecutively, and no other code in between. Simplify conditional
the compilation code and only use one "#ifdef CONFIG_TRACER_MAX_TRACE".

Link: https://lkml.kernel.org/r/20220602140613.545069-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: a541a9559bb0 ("tracing: Do not free snapshot if tracer is on cmdline")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: fix incorrect handling of iterate_dir

[ Upstream commit 88541cb414b7a2450c45fc9c131b37b5753b7679 ]

if iterate_dir() returns non-negative value, caller has to treat it
as normal and check there is any error while populating dentry
information. ksmbd doesn't have to do anything because ksmbd already
checks too small OutputBufferLength to store one file information.

And because ctx->pos is set to file->f_pos when iterative_dir is called,
remove restart_ctx(). And if iterate_dir() return -EIO, which mean
directory entry is corrupted, return STATUS_FILE_CORRUPT_ERROR error
response.

This patch fixes some failure of SMB2_QUERY_DIRECTORY, which happens when
ntfs3 is local filesystem.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: handle smb2 query dir request for OutputBufferLength that is too small

[ Upstream commit 65ca7a3ffff811d6c0d4342d467c381257d566d4 ]

We found the issue that ksmbd return STATUS_NO_MORE_FILES response
even though there are still dentries that needs to be read while
file read/write test using framtest utils.
windows client send smb2 query dir request included
OutputBufferLength(128) that is too small to contain even one entry.
This patch make ksmbd immediately returns OutputBufferLength of response
as zero to client.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 88541cb414b7 ("ksmbd: fix incorrect handling of iterate_dir")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: mte: move register initialization to C

[ Upstream commit 973b9e37330656dec719ede508e4dc40e5c2d80c ]

If FEAT_MTE2 is disabled via the arm64.nomte command line argument on a
CPU that claims to support FEAT_MTE2, the kernel will use Tagged Normal
in the MAIR. If we interpret arm64.nomte to mean that the CPU does not
in fact implement FEAT_MTE2, setting the system register like this may
lead to UNSPECIFIED behavior. Fix it by arranging for MAIR to be set
in the C function cpu_enable_mte which is called based on the sanitized
version of the system register.

There is no need for the rest of the MTE-related system register
initialization to happen from assembly, with the exception of TCR_EL1,
which must be set to include at least TBI1 because the secondary CPUs
access KASan-allocated data structures early. Therefore, make the TCR_EL1
initialization unconditional and move the rest of the initialization to
cpu_enable_mte so that we no longer have a dependency on the unsanitized
ID register value.

Co-developed-by: Evgenii Stepanov <eugenis@google.com>
Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Evgenii Stepanov <eugenis@google.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 3b714d24ef17 ("arm64: mte: CPU feature detection and initial sysreg configuration")
Cc: <stable@vger.kernel.org> # 5.10.x
Link: https://lore.kernel.org/r/20220915222053.3484231-1-eugenis@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: fix invalid derefence of sb_lvbptr

[ Upstream commit 7175e131ebba47afef47e6ac4d5bab474d1e6e49 ]

I experience issues when putting a lkbsb on the stack and have sb_lvbptr
field to a dangled pointer while not using DLM_LKF_VALBLK. It will crash
with the following kernel message, the dangled pointer is here
0xdeadbeef as example:

[  102.749317] BUG: unable to handle page fault for address: 00000000deadbeef
[  102.749320] #PF: supervisor read access in kernel mode
[  102.749323] #PF: error_code(0x0000) - not-present page
[  102.749325] PGD 0 P4D 0
[  102.749332] Oops: 0000 [#1] PREEMPT SMP PTI
[  102.749336] CPU: 0 PID: 1567 Comm: lock_torture_wr Tainted: G        W         5.19.0-rc3+ #1565
[  102.749343] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014
[  102.749344] RIP: 0010:memcpy_erms+0x6/0x10
[  102.749353] Code: cc cc cc cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe
[  102.749355] RSP: 0018:ffff97a58145fd08 EFLAGS: 00010202
[  102.749358] RAX: ffff901778b77070 RBX: 0000000000000000 RCX: 0000000000000040
[  102.749360] RDX: 0000000000000040 RSI: 00000000deadbeef RDI: ffff901778b77070
[  102.749362] RBP: ffff97a58145fd10 R08: ffff901760b67a70 R09: 0000000000000001
[  102.749364] R10: ffff9017008e2cb8 R11: 0000000000000001 R12: ffff901760b67a70
[  102.749366] R13: ffff901760b78f00 R14: 0000000000000003 R15: 0000000000000001
[  102.749368] FS:  0000000000000000(0000) GS:ffff901876e00000(0000) knlGS:0000000000000000
[  102.749372] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  102.749374] CR2: 00000000deadbeef CR3: 000000017c49a004 CR4: 0000000000770ef0
[  102.749376] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  102.749378] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  102.749379] PKRU: 55555554
[  102.749381] Call Trace:
[  102.749382]  <TASK>
[  102.749383]  ? send_args+0xb2/0xd0
[  102.749389]  send_common+0xb7/0xd0
[  102.749395]  _unlock_lock+0x2c/0x90
[  102.749400]  unlock_lock.isra.56+0x62/0xa0
[  102.749405]  dlm_unlock+0x21e/0x330
[  102.749411]  ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[  102.749416]  torture_unlock+0x5a/0x90 [dlm_locktorture]
[  102.749419]  ? preempt_count_sub+0xba/0x100
[  102.749427]  lock_torture_writer+0xbd/0x150 [dlm_locktorture]
[  102.786186]  kthread+0x10a/0x130
[  102.786581]  ? kthread_complete_and_exit+0x20/0x20
[  102.787156]  ret_from_fork+0x22/0x30
[  102.787588]  </TASK>
[  102.787855] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common kvm_intel iTCO_wdt iTCO_vendor_support kvm vmw_vsock_virtio_transport qxl irqbypass vmw_vsock_virtio_transport_common drm_ttm_helper crc32_pclmul joydev crc32c_intel ttm vsock virtio_scsi virtio_balloon snd_pcm drm_kms_helper virtio_console snd_timer snd drm soundcore syscopyarea i2c_i801 sysfillrect sysimgblt i2c_smbus pcspkr fb_sys_fops lpc_ich serio_raw
[  102.792536] CR2: 00000000deadbeef
[  102.792930] ---[ end trace 0000000000000000 ]---

This patch fixes the issue by checking also on DLM_LKF_VALBLK on exflags
is set when copying the lvbptr array instead of if it's just null which
fixes for me the issue.

I think this patch can fix other dlm users as well, depending how they
handle the init, freeing memory handling of sb_lvbptr and don't set
DLM_LKF_VALBLK for some dlm_lock() calls. It might a there could be a
hidden issue all the time. However with checking on DLM_LKF_VALBLK the
user always need to provide a sb_lvbptr non-null value. There might be
more intelligent handling between per ls lvblen, DLM_LKF_VALBLK and
non-null to report the user the way how DLM API is used is wrong but can
be added for later, this will only fix the current behaviour.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Clean up si_domain in the init_dmars() error path

[ Upstream commit 620bf9f981365c18cc2766c53d92bf8131c63f32 ]

A splat from kmem_cache_destroy() was seen with a kernel prior to
commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool")
when there was a failure in init_dmars(), because the iommu_domain
cache still had objects. While the mempool code is now gone, there
still is a leak of the si_domain memory if init_dmars() fails. So
clean up si_domain in the init_dmars() error path.

Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 86080ccc223a ("iommu/vt-d: Allocate si_domain in init_dmars()")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20221010144842.308890-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Allow NVS regions in arch_rmrr_sanity_check()

[ Upstream commit 5566e68d829f5d87670d5984c1c2ccb4c518405f ]

arch_rmrr_sanity_check() warns if the RMRR is not covered by an ACPI
Reserved region, but it seems like it should accept an NVS region as
well. The ACPI spec
https://uefi.org/specs/ACPI/6.5/15_System_Address_Map_Interfaces.html
uses similar wording for "Reserved" and "NVS" region types; for NVS
regions it says "This range of addresses is in use or reserved by the
system and must not be used by the operating system."

There is an old comment on this mailing list that also suggests NVS
regions should pass the arch_rmrr_sanity_check() test:

 The warnings come from arch_rmrr_sanity_check() since it checks whether
 the region is E820_TYPE_RESERVED. However, if the purpose of the check
 is to detect RMRR has regions that may be used by OS as free memory,
 isn't  E820_TYPE_NVS safe, too?

This patch overlaps with another proposed patch that would add the region
type to the log since sometimes the bug reporter sees this log on the
console but doesn't know to include the kernel log:

https://lore.kernel.org/lkml/20220611204859.234975-3-atomlin@redhat.com/

Here's an example of the "Firmware Bug" apparent false positive (wrapped
for line length):

 DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR
       [0x000000006f760000-0x000000006f762fff], contact BIOS vendor for
       fixes
 DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR
       [0x000000006f760000-0x000000006f762fff]

This is the snippet from the e820 table:

 BIOS-e820: [mem 0x0000000068bff000-0x000000006ebfefff] reserved
 BIOS-e820: [mem 0x000000006ebff000-0x000000006f9fefff] ACPI NVS
 BIOS-e820: [mem 0x000000006f9ff000-0x000000006fffefff] ACPI data

Fixes: f036c7fa0ab6 ("iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved")
Cc: Will Mortensen <will@extrahop.com>
Link: https://lore.kernel.org/linux-iommu/64a5843d-850d-e58c-4fc2-0a0eeeb656dc@nec.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216443
Signed-off-by: Charlotte Tan <charlotte@extrahop.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Link: https://lore.kernel.org/r/20220929044449.32515-1-charlotte@extrahop.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: dp83822: disable MDI crossover status change interrupt

[ Upstream commit 7f378c03aa4952507521174fb0da7b24a9ad0be6 ]

If the cable is disconnected the PHY seems to toggle between MDI and
MDI-X modes. With the MDI crossover status interrupt active this causes
roughly 10 interrupts per second.

As the crossover status isn't checked by the driver, the interrupt can
be disabled to reduce the interrupt load.

Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: fix race condition in qdisc_graft()

[ Upstream commit ebda44da44f6f309d302522b049f43d6f829f7aa ]

We had one syzbot report [1] in syzbot queue for a while.
I was waiting for more occurrences and/or a repro but
Dmitry Vyukov spotted the issue right away.

<quoting Dmitry>
qdisc_graft() drops reference to qdisc in notify_and_destroy
while it's still assigned to dev->qdisc
</quoting>

Indeed, RCU rules are clear when replacing a data structure.
The visible pointer (dev->qdisc in this case) must be updated
to the new object _before_ RCU grace period is started
(qdisc_put(old) in this case).

[1]
BUG: KASAN: use-after-free in __tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066
Read of size 4 at addr ffff88802065e038 by task syz-executor.4/21027

CPU: 0 PID: 21027 Comm: syz-executor.4 Not tainted 6.0.0-rc3-syzkaller-00363-g7726d4c3e60b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066
__tcf_qdisc_find net/sched/cls_api.c:1051 [inline]
tc_new_tfilter+0x34f/0x2200 net/sched/cls_api.c:2018
rtnetlink_rcv_msg+0x955/0xca0 net/core/rtnetlink.c:6081
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5efaa89279
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5efbc31168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f5efab9bf80 RCX: 00007f5efaa89279
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005
RBP: 00007f5efaae32e9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5efb0cfb1f R14: 00007f5efbc31300 R15: 0000000000022000
</TASK>

Allocated by task 21027:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:45 [inline]
set_alloc_info mm/kasan/common.c:437 [inline]
____kasan_kmalloc mm/kasan/common.c:516 [inline]
____kasan_kmalloc mm/kasan/common.c:475 [inline]
__kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525
kmalloc_node include/linux/slab.h:623 [inline]
kzalloc_node include/linux/slab.h:744 [inline]
qdisc_alloc+0xb0/0xc50 net/sched/sch_generic.c:938
qdisc_create_dflt+0x71/0x4a0 net/sched/sch_generic.c:997
attach_one_default_qdisc net/sched/sch_generic.c:1152 [inline]
netdev_for_each_tx_queue include/linux/netdevice.h:2437 [inline]
attach_default_qdiscs net/sched/sch_generic.c:1170 [inline]
dev_activate+0x760/0xcd0 net/sched/sch_generic.c:1229
__dev_open+0x393/0x4d0 net/core/dev.c:1441
__dev_change_flags+0x583/0x750 net/core/dev.c:8556
rtnl_configure_link+0xee/0x240 net/core/rtnetlink.c:3189
rtnl_newlink_create net/core/rtnetlink.c:3371 [inline]
__rtnl_newlink+0x10b8/0x17e0 net/core/rtnetlink.c:3580
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593
rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 21020:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track+0x21/0x30 mm/kasan/common.c:45
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
____kasan_slab_free mm/kasan/common.c:367 [inline]
____kasan_slab_free+0x166/0x1c0 mm/kasan/common.c:329
kasan_slab_free include/linux/kasan.h:200 [inline]
slab_free_hook mm/slub.c:1754 [inline]
slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1780
slab_free mm/slub.c:3534 [inline]
kfree+0xe2/0x580 mm/slub.c:4562
rcu_do_batch kernel/rcu/tree.c:2245 [inline]
rcu_core+0x7b5/0x1890 kernel/rcu/tree.c:2505
__do_softirq+0x1d3/0x9c6 kernel/softirq.c:571

Last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348
call_rcu+0x99/0x790 kernel/rcu/tree.c:2793
qdisc_put+0xcd/0xe0 net/sched/sch_generic.c:1083
notify_and_destroy net/sched/sch_api.c:1012 [inline]
qdisc_graft+0xeb1/0x1270 net/sched/sch_api.c:1084
tc_modify_qdisc+0xbb7/0x1a00 net/sched/sch_api.c:1671
rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348
kvfree_call_rcu+0x74/0x940 kernel/rcu/tree.c:3322
neigh_destroy+0x431/0x630 net/core/neighbour.c:912
neigh_release include/net/neighbour.h:454 [inline]
neigh_cleanup_and_release+0x1f8/0x330 net/core/neighbour.c:103
neigh_del net/core/neighbour.c:225 [inline]
neigh_remove_one+0x37d/0x460 net/core/neighbour.c:246
neigh_forced_gc net/core/neighbour.c:276 [inline]
neigh_alloc net/core/neighbour.c:447 [inline]
___neigh_create+0x18b5/0x29a0 net/core/neighbour.c:642
ip6_finish_output2+0xfb8/0x1520 net/ipv6/ip6_output.c:125
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x690/0x1160 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x1ed/0x540 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2653
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

The buggy address belongs to the object at ffff88802065e000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 56 bytes inside of
1024-byte region [ffff88802065e000, ffff88802065e400)

The buggy address belongs to the physical page:
page:ffffea0000819600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20658
head:ffffea0000819600 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 0000000000000000 dead000000000001 ffff888011841dc0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3523, tgid 3523 (sshd), ts 41495190986, free_ts 41417713212
prep_new_page mm/page_alloc.c:2532 [inline]
get_page_from_freelist+0x109b/0x2ce0 mm/page_alloc.c:4283
__alloc_pages+0x1c7/0x510 mm/page_alloc.c:5515
alloc_pages+0x1a6/0x270 mm/mempolicy.c:2270
alloc_slab_page mm/slub.c:1824 [inline]
allocate_slab+0x27e/0x3d0 mm/slub.c:1969
new_slab mm/slub.c:2029 [inline]
___slab_alloc+0x7f1/0xe10 mm/slub.c:3031
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3118
slab_alloc_node mm/slub.c:3209 [inline]
__kmalloc_node_track_caller+0x2f2/0x380 mm/slub.c:4955
kmalloc_reserve net/core/skbuff.c:358 [inline]
__alloc_skb+0xd9/0x2f0 net/core/skbuff.c:430
alloc_skb_fclone include/linux/skbuff.h:1307 [inline]
tcp_stream_alloc_skb+0x38/0x580 net/ipv4/tcp.c:861
tcp_sendmsg_locked+0xc36/0x2f80 net/ipv4/tcp.c:1325
tcp_sendmsg+0x2b/0x40 net/ipv4/tcp.c:1483
inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
sock_write_iter+0x291/0x3d0 net/socket.c:1108
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:578
ksys_write+0x1e8/0x250 fs/read_write.c:631
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1449 [inline]
free_pcp_prepare+0x5e4/0xd20 mm/page_alloc.c:1499
free_unref_page_prepare mm/page_alloc.c:3380 [inline]
free_unref_page+0x19/0x4d0 mm/page_alloc.c:3476
__unfreeze_partials+0x17c/0x1a0 mm/slub.c:2548
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:447
kasan_slab_alloc include/linux/kasan.h:224 [inline]
slab_post_alloc_hook mm/slab.h:727 [inline]
slab_alloc_node mm/slub.c:3243 [inline]
slab_alloc mm/slub.c:3251 [inline]
__kmem_cache_alloc_lru mm/slub.c:3258 [inline]
kmem_cache_alloc+0x267/0x3b0 mm/slub.c:3268
kmem_cache_zalloc include/linux/slab.h:723 [inline]
alloc_buffer_head+0x20/0x140 fs/buffer.c:2974
alloc_page_buffers+0x280/0x790 fs/buffer.c:829
create_empty_buffers+0x2c/0xee0 fs/buffer.c:1558
ext4_block_write_begin+0x1004/0x1530 fs/ext4/inode.c:1074
ext4_da_write_begin+0x422/0xae0 fs/ext4/inode.c:2996
generic_perform_write+0x246/0x560 mm/filemap.c:3738
ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:270
ext4_file_write_iter+0x44a/0x1660 fs/ext4/file.c:679
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:578

Fixes: af356afa010f ("net_sched: reintroduce dev->qdisc for use by sch_api")
Reported-by: syzbot <syzkaller@googlegroups.com>
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221018203258.2793282-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns: fix possible memory leak in hnae_ae_register()

[ Upstream commit ff2f5ec5d009844ec28f171123f9e58750cef4bf ]

Inject fault while probing module, if device_register() fails,
but the refcount of kobject is not decreased to 0, the name
allocated in dev_set_name() is leaked. Fix this by calling
put_device(), so that name can be freed in callback function
kobject_cleanup().

unreferenced object 0xffff00c01aba2100 (size 128):
  comm "systemd-udevd", pid 1259, jiffies 4294903284 (age 294.152s)
  hex dump (first 32 bytes):
    68 6e 61 65 30 00 00 00 18 21 ba 1a c0 00 ff ff  hnae0....!......
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000034783f26>] slab_post_alloc_hook+0xa0/0x3e0
    [<00000000748188f2>] __kmem_cache_alloc_node+0x164/0x2b0
    [<00000000ab0743e8>] __kmalloc_node_track_caller+0x6c/0x390
    [<000000006c0ffb13>] kvasprintf+0x8c/0x118
    [<00000000fa27bfe1>] kvasprintf_const+0x60/0xc8
    [<0000000083e10ed7>] kobject_set_name_vargs+0x3c/0xc0
    [<000000000b87affc>] dev_set_name+0x7c/0xa0
    [<000000003fd8fe26>] hnae_ae_register+0xcc/0x190 [hnae]
    [<00000000fe97edc9>] hns_dsaf_ae_init+0x9c/0x108 [hns_dsaf]
    [<00000000c36ff1eb>] hns_dsaf_probe+0x548/0x748 [hns_dsaf]

Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem hnae framework support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221018122451.1749171-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new()

[ Upstream commit 258ad2fe5ede773625adfda88b173f4123e59f45 ]

Inject fault while probing module, if device_register() fails,
but the refcount of kobject is not decreased to 0, the name
allocated in dev_set_name() is leaked. Fix this by calling
put_device(), so that name can be freed in callback function
kobject_cleanup().

unreferenced object 0xffff88810152ad20 (size 8):
  comm "modprobe", pid 252, jiffies 4294849206 (age 22.713s)
  hex dump (first 8 bytes):
    68 77 73 69 6d 30 00 ff                          hwsim0..
  backtrace:
    [<000000009c3504ed>] __kmalloc_node_track_caller+0x44/0x1b0
    [<00000000c0228a5e>] kvasprintf+0xb5/0x140
    [<00000000cff8c21f>] kvasprintf_const+0x55/0x180
    [<0000000055a1e073>] kobject_set_name_vargs+0x56/0x150
    [<000000000a80b139>] dev_set_name+0xab/0xe0

Fixes: f36a111a74e7 ("wwan_hwsim: WWAN device simulator")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20221018131607.1901641-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: include vport_id in filter spec hash and equal()

[ Upstream commit c2bf23e4a5af37a4d77901d9ff14c50a269f143d ]

Filters on different vports are qualified by different implicit MACs and/or
VLANs, so shouldn't be considered equal even if their other match fields
are identical.

Fixes: 7c460d9be610 ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10")
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: sfb: fix null pointer access issue when sfb_init() fails

[ Upstream commit 2a3fc78210b9f0e85372a2435368962009f480fc ]

When the default qdisc is sfb, if the qdisc of dev_queue fails to be
inited during mqprio_init(), sfb_reset() is invoked to clear resources.
In this case, the q->qdisc is NULL, and it will cause gpf issue.

The process is as follows:
qdisc_create_dflt()
sfb_init()
tcf_block_get()          --->failed, q->qdisc is NULL
...
qdisc_put()
...
sfb_reset()
qdisc_reset(q->qdisc)    --->q->qdisc is NULL
ops = qdisc->ops

The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
RIP: 0010:qdisc_reset+0x2b/0x6f0
Call Trace:
<TASK>
sfb_reset+0x37/0xd0
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f2164122d04
</TASK>

Fixes: e13e02a3c68d ("net_sched: SFB flow scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: delete duplicate cleanup of backlog and qlen

[ Upstream commit c19d893fbf3f2f8fa864ae39652c7fee939edde2 ]

qdisc_reset() is clearing qdisc->q.qlen and qdisc->qstats.backlog
_after_ calling qdisc->ops->reset. There is no need to clear them
again in the specific reset function.

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220824005231.345727-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 2a3fc78210b9 ("net: sched: sfb: fix null pointer access issue when sfb_init() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: cake: fix null pointer access issue when cake_init() fails

[ Upstream commit 51f9a8921ceacd7bf0d3f47fa867a64988ba1dcb ]

When the default qdisc is cake, if the qdisc of dev_queue fails to be
inited during mqprio_init(), cake_reset() is invoked to clear
resources. In this case, the tins is NULL, and it will cause gpf issue.

The process is as follows:
qdisc_create_dflt()
cake_init()
q->tins = kvcalloc(...)        --->failed, q->tins is NULL
...
qdisc_put()
...
cake_reset()
...
cake_dequeue_one()
b = &q->tins[...]   --->q->tins is NULL

The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:cake_dequeue_one+0xc9/0x3c0
Call Trace:
<TASK>
cake_reset+0xb1/0x140
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f89e5122d04
</TASK>

Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: fix workqueue MEM_RECLAIM flushing dependency

[ Upstream commit ddd2b8de9f85b388925e7dc46b3890fc1a0d8d24 ]

The keep alive timer needs to stay on nvmet_wq, and not
modified to reschedule on the system_wq.

This fixes a warning:
------------[ cut here ]------------
workqueue: WQ_MEM_RECLAIM
nvmet-wq:nvmet_rdma_release_queue_work [nvmet_rdma] is flushing
!WQ_MEM_RECLAIM events:nvmet_keep_alive_timer [nvmet]
WARNING: CPU: 3 PID: 1086 at kernel/workqueue.c:2628
check_flush_dependency+0x16c/0x1e0

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 8832cf922151 ("nvmet: use a private workqueue instead of the system workqueue")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-hwmon: kmalloc the NVME SMART log buffer

[ Upstream commit c94b7f9bab22ac504f9153767676e659988575ad ]

Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has
caused a regression on our platform.

It turned out that the nvme_get_log() method invocation caused the
nvme_hwmon_data structure instance corruption.  In particular the
nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with
garbage.  After some research we discovered that the problem happened
even before the actual NVME DMA execution, but during the buffer mapping.
Since our platform is DMA-noncoherent, the mapping implied the cache-line
invalidations or write-backs depending on the DMA-direction parameter.
In case of the NVME SMART log getting the DMA was performed
from-device-to-memory, thus the cache-invalidation was activated during
the buffer mapping.  Since the log-buffer isn't cache-line aligned, the
cache-invalidation caused the neighbour data to be discarded.  The
neighbouring data turned to be the data surrounding the buffer in the
framework of the nvme_hwmon_data structure.

In order to fix that we need to make sure that the whole log-buffer is
defined within the cache-line-aligned memory region so the
cache-invalidation procedure wouldn't involve the adjacent data. One of
the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the
rest of the NVME core driver prefer that method it has been chosen to fix
this problem too.

Note after a deeper researches we found out that the denoted commit wasn't
a root cause of the problem. It just revealed the invalidity by activating
the DMA-based NVME SMART log getting performed in the framework of the
NVME hwmon driver. The problem was here since the initial commit of the
driver.

[1] Documentation/core-api/dma-api-howto.rst

Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-hwmon: consistently ignore errors from nvme_hwmon_init

[ Upstream commit 6b8cf94005187952f794c0c4ed3920a1e8accfa3 ]

An NVMe controller works perfectly fine even when the hwmon
initialization fails.  Stop returning errors that do not come from a
controller reset from nvme_hwmon_init to handle this case consistently.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Stable-dep-of: c94b7f9bab22 ("nvme-hwmon: kmalloc the NVME SMART log buffer")
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements

[ Upstream commit 96df8360dbb435cc69f7c3c8db44bf8b1c24cd7b ]

Otherwise EINVAL is bogusly reported to userspace when deleting a set
element. NFTA_SET_ELEM_KEY_END does not need to be set in case of:

- insertion: if not present, start key is used as end key.
- deletion: only start key needs to be specified, end key is ignored.

Hence, relax the sanity check.

Fixes: 88cccd908d51 ("netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: catch NULL pointer issue on reconfig

[ Upstream commit aa1d7e1267c12e07d979aa34c613716a89029db2 ]

It's possible that the driver will dereference a qcq that doesn't exist
when calling ionic_reconfigure_queues(), which causes a page fault BUG.

If a reduction in the number of queues is followed by a different
reconfig such as changing the ring size, the driver can hit a NULL
pointer when trying to clean up non-existent queues.

Fix this by checking to make sure both the qcqs array and qcq entry
exists bofore trying to use and free the entry.

Fixes: 101b40a0171f ("ionic: change queue count with no reset")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20221017233123.15869-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hsr: avoid possible NULL deref in skb_clone()

[ Upstream commit d8b57135fd9ffe9a5b445350a686442a531c5339 ]

syzbot got a crash [1] in skb_clone(), caused by a bug
in hsr_get_untagged_frame().

When/if create_stripped_skb_hsr() returns NULL, we must
not attempt to call skb_clone().

While we are at it, replace a WARN_ONCE() by netdev_warn_once().

[1]
general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 1 PID: 754 Comm: syz-executor.0 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
RIP: 0010:skb_clone+0x108/0x3c0 net/core/skbuff.c:1641
Code: 93 02 00 00 49 83 7c 24 28 00 0f 85 e9 00 00 00 e8 5d 4a 29 fa 4c 8d 75 7e 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 4c 89 f2 83 e2 07 38 d0 7f 08 84 c0 0f 85 9e 01 00 00
RSP: 0018:ffffc90003ccf4e0 EFLAGS: 00010207

RAX: dffffc0000000000 RBX: ffffc90003ccf5f8 RCX: ffffc9000c24b000
RDX: 000000000000000f RSI: ffffffff8751cb13 RDI: 0000000000000000
RBP: 0000000000000000 R08: 00000000000000f0 R09: 0000000000000140
R10: fffffbfff181d972 R11: 0000000000000000 R12: ffff888161fc3640
R13: 0000000000000a20 R14: 000000000000007e R15: ffffffff8dc5f620
FS: 00007feb621e4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feb621e3ff8 CR3: 00000001643a9000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
hsr_get_untagged_frame+0x4e/0x610 net/hsr/hsr_forward.c:164
hsr_forward_do net/hsr/hsr_forward.c:461 [inline]
hsr_forward_skb+0xcca/0x1d50 net/hsr/hsr_forward.c:623
hsr_handle_frame+0x588/0x7c0 net/hsr/hsr_slave.c:69
__netif_receive_skb_core+0x9fe/0x38f0 net/core/dev.c:5379
__netif_receive_skb_one_core+0xae/0x180 net/core/dev.c:5483
__netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5599
netif_receive_skb_internal net/core/dev.c:5685 [inline]
netif_receive_skb+0x12f/0x8d0 net/core/dev.c:5744
tun_rx_batched+0x4ab/0x7a0 drivers/net/tun.c:1544
tun_get_user+0x2686/0x3a00 drivers/net/tun.c:1995
tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2025
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:584
ksys_write+0x127/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: f266a683a480 ("net/hsr: Better frame dispatch")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221017165928.2150130-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm: remove unnecessary assignment statement in alloc_dev()

[ Upstream commit 99f4f5bcb975527508eb7a5e3e34bdb91d576746 ]

Fixes: 74fe6ba923949 ("dm: convert to blk_alloc_disk/blk_cleanup_disk")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix xid leak in cifs_ses_add_channel()

[ Upstream commit e909d054bdea75ef1ec48c18c5936affdaecbb2c ]

Before return, should free the xid, otherwise, the
xid will be leaked.

Fixes: d70e9fa55884 ("cifs: try opening channels after mounting")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix xid leak in cifs_flock()

[ Upstream commit 575e079c782b9862ec2626403922d041a42e6ed6 ]

If not flock, before return -ENOLCK, should free the xid,
otherwise, the xid will be leaked.

Fixes: d0677992d2af ("cifs: add support for flock")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix xid leak in cifs_copy_file_range()

[ Upstream commit 9a97df404a402fe1174d2d1119f87ff2a0ca2fe9 ]

If the file is used by swap, before return -EOPNOTSUPP, should
free the xid, otherwise, the xid will be leaked.

Fixes: 4e8aea30f775 ("smb3: enable swap on SMB3 mounts")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix xid leak in cifs_create()

[ Upstream commit fee0fb1f15054bb6a0ede452acb42da5bef4d587 ]

If the cifs already shutdown, we should free the xid before return,
otherwise, the xid will be leaked.

Fixes: 087f757b0129 ("cifs: add shutdown support")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udp: Update reuse->has_conns under reuseport_lock.

[ Upstream commit 69421bf98482d089e50799f45e48b25ce4a8d154 ]

When we call connect() for a UDP socket in a reuseport group, we have
to update sk->sk_reuseport_cb->has_conns to 1.  Otherwise, the kernel
could select a unconnected socket wrongly for packets sent to the
connected socket.

However, the current way to set has_conns is illegal and possible to
trigger that problem.  reuseport_has_conns() changes has_conns under
rcu_read_lock(), which upgrades the RCU reader to the updater.  Then,
it must do the update under the updater's lock, reuseport_lock, but
it doesn't for now.

For this reason, there is a race below where we fail to set has_conns
resulting in the wrong socket selection.  To avoid the race, let's split
the reader and updater with proper locking.

 cpu1                               cpu2
+----+                             +----+

__ip[46]_datagram_connect()        reuseport_grow()
.                                  .
|- reuseport_has_conns(sk, true)   |- more_reuse = __reuseport_alloc(more_socks_size)
|  .                               |
|  |- rcu_read_lock()
|  |- reuse = rcu_dereference(sk->sk_reuseport_cb)
|  |
|  |                               |  /* reuse->has_conns == 0 here */
|  |                               |- more_reuse->has_conns = reuse->has_conns
|  |- reuse->has_conns = 1         |  /* more_reuse->has_conns SHOULD BE 1 HERE */
|  |                               |
|  |                               |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb,
|  |                               |                     more_reuse)
|  `- rcu_read_unlock()            `- kfree_rcu(reuse, rcu)
|
|- sk->sk_state = TCP_ESTABLISHED

Note the likely(reuse) in reuseport_has_conns_set() is always true,
but we put the test there for ease of review.  [0]

For the record, usually, sk_reuseport_cb is changed under lock_sock().
The only exception is reuseport_grow() & TCP reqsk migration case.

  1) shutdown() TCP listener, which is moved into the latter part of
     reuse->socks[] to migrate reqsk.

  2) New listen() overflows reuse->socks[] and call reuseport_grow().

  3) reuse->max_socks overflows u16 with the new listener.

  4) reuseport_grow() pops the old shutdown()ed listener from the array
     and update its sk->sk_reuseport_cb as NULL without lock_sock().

shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(),
but, reuseport_has_conns_set() is called only for UDP under lock_sock(),
so likely(reuse) never be false in reuseport_has_conns_set().

[0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/

Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix memory leak in lpfc_create_port()

[ Upstream commit dc8e483f684a24cc06e1d5fa958b54db58855093 ]

Commit 5e633302ace1 ("scsi: lpfc: vmid: Add support for VMID in mailbox
command") introduced allocations for the VMID resources in
lpfc_create_port() after the call to scsi_host_alloc(). Upon failure on the
VMID allocations, the new code would branch to the 'out' label, which
returns NULL without unwinding anything, thus skipping the call to
scsi_host_put().

Fix the problem by creating a separate label 'out_free_vmid' to unwind the
VMID resources and make the 'out_put_shost' label call only
scsi_host_put(), as was done before the introduction of allocations for
VMID.

Fixes: 5e633302ace1 ("scsi: lpfc: vmid: Add support for VMID in mailbox command")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220916035908.712799-1-rafaelmendsr@gmail.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phylink: add mac_managed_pm in phylink_config structure

[ Upstream commit 96de900ae78e7dbedc937fd91bafe2934579c65a ]

The recent commit

'commit 744d23c71af3 ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state")'

requires the MAC driver explicitly tell the phy driver who is
managing the PM, otherwise you will see warning during resume
stage.

Add a boolean property in the phylink_config structure so that
the MAC driver can use it to tell the PHY driver if it wants to
manage the PM.

Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: dp83867: Extend RX strap quirk for SGMII mode

[ Upstream commit 0c9efbd5c50c64ead434960a404c9c9a097b0403 ]

When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4
register should be set. The former is already handled in
dp83867_config_init; add the latter in SGMII specific initialization.

Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/atm: fix proc_mpc_write incorrect return value

[ Upstream commit d8bde3bf7f82dac5fc68a62c2816793a12cafa2a ]

Then the input contains '\0' or '\n', proc_mpc_write has read them,
so the return value needs +1.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xiaobo Liu <cppcoffee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: Change VF mac via PF as first preference if available.

[ Upstream commit a8aed7b35becfd21f22a77c7014029ea837b018f ]

Changing a VF's mac address through the VF (rather than via the PF)
fails with EPERM because the latter part of efx_ef10_set_mac_address
attempts to change the vport mac address list as the VF.
Even with this fixed it still fails with EBUSY because the vadaptor
is still assigned on the VF - the vadaptor reassignment must be within
a section where the VF has torn down its state.

A major reason this has broken is because we have two functions that
ostensibly do the same thing - have a PF and VF cooperate to change a
VF mac address. Rather than do this, if we are changing the mac of a VF
that has a link to the PF in the same VM then simply call
sriov_set_vf_mac instead, which is a proven working function that does
that.

If there is no PF available, or that fails non-fatally, then attempt to
change the VF's mac address as we would a PF, without updating the PF's
data.

Test case:
Create a VF:
  echo 1 > /sys/class/net/<if>/device/sriov_numvfs
Set the mac address of the VF directly:
  ip link set <vf> addr 00:11:22:33:44:55
Set the MAC address of the VF via the PF:
  ip link set <pf> vf 0 mac 00:11:22:33:44:66
Without this patch the last command will fail with ENOENT.

Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Reported-by: Íñigo Huguet <ihuguet@redhat.com>
Fixes: 910c8789a777 ("set the MAC address using MC_CMD_VADAPTOR_SET_MAC")
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: magicmouse: Do not set BTN_MOUSE on double report

[ Upstream commit bb5f0c855dcfc893ae5ed90e4c646bde9e4498bf ]

Under certain conditions the Magic Trackpad can group 2 reports in a
single packet. The packet is split and the raw event function is
invoked recursively for each part.

However, after processing each part, the BTN_MOUSE status is updated,
sending multiple click events. [1]

Return after processing double reports to avoid this issue.

Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/811
Fixes: a462230e16ac ("HID: magicmouse: enable Magic Trackpad support")
Reported-by: Nulo <git@nulo.in>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221009182747.90730-1-jose.exposito89@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix DMA mappings leak

[ Upstream commit aae425efdfd1b1d8452260a3cb49344ebf20b1f5 ]

During reallocation of RX buffers, new DMA mappings are created for
those buffers.

steps for reproduction:
while :
do
for ((i=0; i<=8160; i=i+32))
do
ethtool -G enp130s0f0 rx $i tx $i
sleep 0.5
ethtool -g enp130s0f0
done
done

This resulted in crash:
i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536
Driver BUG
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50
Call Trace:
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
Missing register, driver bug
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140
Call Trace:
xdp_rxq_info_unreg+0x1e/0x50
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b

This was caused because of new buffers with different RX ring count should
substitute older ones, but those buffers were freed in
i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi,
thus kfree on rx_bi caused leak of already mapped DMA.

Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally
reallocate back to rx_bi when BPF program unloads.

If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XSP_SETUP_XSK_POOL handler.

Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings")
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix an information leak in tipc_topsrv_kern_subscr

[ Upstream commit 777ecaabd614d47c482a5c9031579e66da13989a ]

Use a 8-byte write to initialize sub.usr_handle in
tipc_topsrv_kern_subscr(), otherwise four bytes remain uninitialized
when issuing setsockopt(..., SOL_TIPC, ...).
This resulted in an infoleak reported by KMSAN when the packet was
received:

  =====================================================
  BUG: KMSAN: kernel-infoleak in copyout+0xbc/0x100 lib/iov_iter.c:169
   instrument_copy_to_user ./include/linux/instrumented.h:121
   copyout+0xbc/0x100 lib/iov_iter.c:169
   _copy_to_iter+0x5c0/0x20a0 lib/iov_iter.c:527
   copy_to_iter ./include/linux/uio.h:176
   simple_copy_to_iter+0x64/0xa0 net/core/datagram.c:513
   __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419
   skb_copy_datagram_iter+0x58/0x200 net/core/datagram.c:527
   skb_copy_datagram_msg ./include/linux/skbuff.h:3903
   packet_recvmsg+0x521/0x1e70 net/packet/af_packet.c:3469
   ____sys_recvmsg+0x2c4/0x810 net/socket.c:?
   ___sys_recvmsg+0x217/0x840 net/socket.c:2743
   __sys_recvmsg net/socket.c:2773
   __do_sys_recvmsg net/socket.c:2783
   __se_sys_recvmsg net/socket.c:2780
   __x64_sys_recvmsg+0x364/0x540 net/socket.c:2780
   do_syscall_x64 arch/x86/entry/common.c:50
   do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120

  ...

  Uninit was stored to memory at:
   tipc_sub_subscribe+0x42d/0xb50 net/tipc/subscr.c:156
   tipc_conn_rcv_sub+0x246/0x620 net/tipc/topsrv.c:375
   tipc_topsrv_kern_subscr+0x2e8/0x400 net/tipc/topsrv.c:579
   tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190
   tipc_sk_join+0x2a8/0x770 net/tipc/socket.c:3084
   tipc_setsockopt+0xae5/0xe40 net/tipc/socket.c:3201
   __sys_setsockopt+0x87f/0xdc0 net/socket.c:2252
   __do_sys_setsockopt net/socket.c:2263
   __se_sys_setsockopt net/socket.c:2260
   __x64_sys_setsockopt+0xe0/0x160 net/socket.c:2260
   do_syscall_x64 arch/x86/entry/common.c:50
   do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120

  Local variable sub created at:
   tipc_topsrv_kern_subscr+0x57/0x400 net/tipc/topsrv.c:562
   tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190

  Bytes 84-87 of 88 are uninitialized
  Memory access of size 88 starts at ffff88801ed57cd0
  Data copied to user address 0000000020000400
  ...
  =====================================================

Signed-off-by: Alexander Potapenko <glider@google.com>
Fixes: 026321c6d056a5 ("tipc: rename tipc_server to tipc_topsrv")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: Fix recognition of trial period

[ Upstream commit 28be7ca4fcfd69a2d52aaa331adbf9dbe91f9e6e ]

The trial period exists until jiffies is after addr_trial_end. But as
jiffies will eventually overflow, just using time_after will eventually
give incorrect results. As the node address is set once the trial period
ends, this can be used to know that we are not in the trial period.

Fixes: e415577f57f4 ("tipc: correct discovery message handling during address trial period")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: extlog: Handle multiple records

[ Upstream commit f6ec01da40e4139b41179f046044ee7c4f6370dc ]

If there is no user space consumer of extlog_mem trace records, then
Linux properly handles multiple error records in an ELOG block

extlog_print()
  print_extlog_rcd()
    __print_extlog_rcd()
      cper_estatus_print()
apei_estatus_for_each_section()

But the other code path hard codes looking for a single record to
output a trace record.

Fix by using the same apei_estatus_for_each_section() iterator
to step over all records.

Fixes: 2dfb7d51a61d ("trace, RAS: Add eMCA trace event interface")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: Add module dependency on hdmi-codec

[ Upstream commit d1c0b7de4dfa5505cf7a1d6220aa72aace4435d0 ]

The VC4 HDMI controller driver relies on the HDMI codec ASoC driver. In
order to set it up properly, in vc4_hdmi_audio_init(), our HDMI driver
will register a device matching the HDMI codec driver, and then register
an ASoC card using that codec.

However, if vc4 is compiled as a module, chances are that the hdmi-codec
driver will be too. In such a case, the module loader will have a very
narrow window to load the module between the device registration and the
card registration.

If it fails to load the module in time, the card registration will fail
with EPROBE_DEFER, and we'll abort the audio initialisation,
unregistering the HDMI codec device in the process.

The next time the bind callback will be run, it's likely that we end up
missing that window again, effectively preventing vc4 to probe entirely.

In order to prevent this, we can create a soft dependency of the vc4
driver on the HDMI codec one so that we're sure the HDMI codec will be
loaded before the VC4 module is, and thus we'll never end up in the
previous situation.

Fixes: 91e99e113929 ("drm/vc4: hdmi: Register HDMI codec")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902144111.3424560-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix processing of delayed tree block refs during backref walking

[ Upstream commit 943553ef9b51db303ab2b955c1025261abfdf6fb ]

During backref walking, when processing a delayed reference with a type of
BTRFS_TREE_BLOCK_REF_KEY, we have two bugs there:

1) We are accessing the delayed references extent_op, and its key, without
   the protection of the delayed ref head's lock;

2) If there's no extent op for the delayed ref head, we end up with an
   uninitialized key in the stack, variable 'tmp_op_key', and then pass
   it to add_indirect_ref(), which adds the reference to the indirect
   refs rb tree.

   This is wrong, because indirect references should have a NULL key
   when we don't have access to the key, and in that case they should be
   added to the indirect_missing_keys rb tree and not to the indirect rb
   tree.

   This means that if have BTRFS_TREE_BLOCK_REF_KEY delayed ref resulting
   from freeing an extent buffer, therefore with a count of -1, it will
   not cancel out the corresponding reference we have in the extent tree
   (with a count of 1), since both references end up in different rb
   trees.

   When using fiemap, where we often need to check if extents are shared
   through shared subtrees resulting from snapshots, it means we can
   incorrectly report an extent as shared when it's no longer shared.
   However this is temporary because after the transaction is committed
   the extent is no longer reported as shared, as running the delayed
   reference results in deleting the tree block reference from the extent
   tree.

   Outside the fiemap context, the result is unpredictable, as the key was
   not initialized but it's used when navigating the rb trees to insert
   and search for references (prelim_ref_compare()), and we expect all
   references in the indirect rb tree to have valid keys.

The following reproducer triggers the second bug:

   $ cat test.sh
   #!/bin/bash

   DEV=/dev/sdj
   MNT=/mnt/sdj

   mkfs.btrfs -f $DEV
   mount -o compress $DEV $MNT

   # With a compressed 128M file we get a tree height of 2 (level 1 root).
   xfs_io -f -c "pwrite -b 1M 0 128M" $MNT/foo

   btrfs subvolume snapshot $MNT $MNT/snap

   # Fiemap should output 0x2008 in the flags column.
   # 0x2000 means shared extent
   # 0x8 means encoded extent (because it's compressed)
   echo
   echo "fiemap after snapshot, range [120M, 120M + 128K):"
   xfs_io -c "fiemap -v 120M 128K" $MNT/foo
   echo

   # Overwrite one extent and fsync to flush delalloc and COW a new path
   # in the snapshot's tree.
   #
   # After this we have a BTRFS_DROP_DELAYED_REF delayed ref of type
   # BTRFS_TREE_BLOCK_REF_KEY with a count of -1 for every COWed extent
   # buffer in the path.
   #
   # In the extent tree we have inline references of type
   # BTRFS_TREE_BLOCK_REF_KEY, with a count of 1, for the same extent
   # buffers, so they should cancel each other, and the extent buffers in
   # the fs tree should no longer be considered as shared.
   #
   echo "Overwriting file range [120M, 120M + 128K)..."
   xfs_io -c "pwrite -b 128K 120M 128K" $MNT/snap/foo
   xfs_io -c "fsync" $MNT/snap/foo

   # Fiemap should output 0x8 in the flags column. The extent in the range
   # [120M, 120M + 128K) is no longer shared, it's now exclusive to the fs
   # tree.
   echo
   echo "fiemap after overwrite range [120M, 120M + 128K):"
   xfs_io -c "fiemap -v 120M 128K" $MNT/foo
   echo

   umount $MNT

Running it before this patch:

   $ ./test.sh
   (...)
   wrote 134217728/134217728 bytes at offset 0
   128 MiB, 128 ops; 0.1152 sec (1.085 GiB/sec and 1110.5809 ops/sec)
   Create a snapshot of '/mnt/sdj' in '/mnt/sdj/snap'

   fiemap after snapshot, range [120M, 120M + 128K):
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [245760..246015]: 34304..34559       256 0x2008

   Overwriting file range [120M, 120M + 128K)...
   wrote 131072/131072 bytes at offset 125829120
   128 KiB, 1 ops; 0.0001 sec (683.060 MiB/sec and 5464.4809 ops/sec)

   fiemap after overwrite range [120M, 120M + 128K):
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [245760..246015]: 34304..34559       256 0x2008

The extent in the range [120M, 120M + 128K) is still reported as shared
(0x2000 bit set) after overwriting that range and flushing delalloc, which
is not correct - an entire path was COWed in the snapshot's tree and the
extent is now only referenced by the original fs tree.

Running it after this patch:

   $ ./test.sh
   (...)
   wrote 134217728/134217728 bytes at offset 0
   128 MiB, 128 ops; 0.1198 sec (1.043 GiB/sec and 1068.2067 ops/sec)
   Create a snapshot of '/mnt/sdj' in '/mnt/sdj/snap'

   fiemap after snapshot, range [120M, 120M + 128K):
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [245760..246015]: 34304..34559       256 0x2008

   Overwriting file range [120M, 120M + 128K)...
   wrote 131072/131072 bytes at offset 125829120
   128 KiB, 1 ops; 0.0001 sec (694.444 MiB/sec and 5555.5556 ops/sec)

   fiemap after overwrite range [120M, 120M + 128K):
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [245760..246015]: 34304..34559       256   0x8

Now the extent is not reported as shared anymore.

So fix this by passing a NULL key pointer to add_indirect_ref() when
processing a delayed reference for a tree block if there's no extent op
for our delayed ref head with a defined key. Also access the extent op
only after locking the delayed ref head's lock.

The reproducer will be converted later to a test case for fstests.

Fixes: 86d5f994425252 ("btrfs: convert prelimary reference tracking to use rbtrees")
Fixes: a6dbceafb915e8 ("btrfs: Remove unused op_key var from add_delayed_refs")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix processing of delayed data refs during backref walking

[ Upstream commit 4fc7b57228243d09c0d878873bf24fa64a90fa01 ]

When processing delayed data references during backref walking and we are
using a share context (we are being called through fiemap), whenever we
find a delayed data reference for an inode different from the one we are
interested in, then we immediately exit and consider the data extent as
shared. This is wrong, because:

1) This might be a DROP reference that will cancel out a reference in the
   extent tree;

2) Even if it's an ADD reference, it may be followed by a DROP reference
   that cancels it out.

In either case we should not exit immediately.

Fix this by never exiting when we find a delayed data reference for
another inode - instead add the reference and if it does not cancel out
other delayed reference, we will exit early when we call
extent_is_shared() after processing all delayed references. If we find
a drop reference, then signal the code that processes references from
the extent tree (add_inline_refs() and add_keyed_refs()) to not exit
immediately if it finds there a reference for another inode, since we
have delayed drop references that may cancel it out. In this later case
we exit once we don't have references in the rb trees that cancel out
each other and have two references for different inodes.

Example reproducer for case 1):

   $ cat test-1.sh
   #!/bin/bash

   DEV=/dev/sdj
   MNT=/mnt/sdj

   mkfs.btrfs -f $DEV
   mount $DEV $MNT

   xfs_io -f -c "pwrite 0 64K" $MNT/foo
   cp --reflink=always $MNT/foo $MNT/bar

   echo
   echo "fiemap after cloning:"
   xfs_io -c "fiemap -v" $MNT/foo

   rm -f $MNT/bar
   echo
   echo "fiemap after removing file bar:"
   xfs_io -c "fiemap -v" $MNT/foo

   umount $MNT

Running it before this patch, the extent is still listed as shared, it has
the flag 0x2000 (FIEMAP_EXTENT_SHARED) set:

   $ ./test-1.sh
   fiemap after cloning:
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..127]:        26624..26751       128 0x2001

   fiemap after removing file bar:
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..127]:        26624..26751       128 0x2001

Example reproducer for case 2):

   $ cat test-2.sh
   #!/bin/bash

   DEV=/dev/sdj
   MNT=/mnt/sdj

   mkfs.btrfs -f $DEV
   mount $DEV $MNT

   xfs_io -f -c "pwrite 0 64K" $MNT/foo
   cp --reflink=always $MNT/foo $MNT/bar

   # Flush delayed references to the extent tree and commit current
   # transaction.
   sync

   echo
   echo "fiemap after cloning:"
   xfs_io -c "fiemap -v" $MNT/foo

   rm -f $MNT/bar
   echo
   echo "fiemap after removing file bar:"
   xfs_io -c "fiemap -v" $MNT/foo

   umount $MNT

Running it before this patch, the extent is still listed as shared, it has
the flag 0x2000 (FIEMAP_EXTENT_SHARED) set:

   $ ./test-2.sh
   fiemap after cloning:
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..127]:        26624..26751       128 0x2001

   fiemap after removing file bar:
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..127]:        26624..26751       128 0x2001

After this patch, after deleting bar in both tests, the extent is not
reported with the 0x2000 flag anymore, it gets only the flag 0x1
(which is FIEMAP_EXTENT_LAST):

   $ ./test-1.sh
   fiemap after cloning:
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..127]:        26624..26751       128 0x2001

   fiemap after removing file bar:
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..127]:        26624..26751       128   0x1

   $ ./test-2.sh
   fiemap after cloning:
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..127]:        26624..26751       128 0x2001

   fiemap after removing file bar:
   /mnt/sdj/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..127]:        26624..26751       128   0x1

These tests will later be converted to a test case for fstests.

Fixes: dc046b10c8b7d4 ("Btrfs: make fiemap not blow when you have lots of snapshots")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/topology: Fix duplicated core ID within a package

commit 71eac7063698b7d7b8fafb1683ac24a034541141 upstream.

Today, core ID is assumed to be unique within each package.

But an AlderLake-N platform adds a Module level between core and package,
Linux excludes the unknown modules bits from the core ID, resulting in
duplicate core ID's.

To keep core ID unique within a package, Linux must include all APIC-ID
bits for known or unknown levels above the core and below the package
in the core ID.

It is important to understand that core ID's have always come directly
from the APIC-ID encoding, which comes from the BIOS. Thus there is no
guarantee that they start at 0, or that they are contiguous.
As such, naively using them for array indexes can be problematic.

[ dhansen: un-known -> unknown ]

Fixes: 7745f03eb395 ("x86/topology: Add CPUID.1F multi-die/package support")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-5-rui.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/topology: Fix multiple packages shown on a single-package system

commit 2b12a7a126d62bdbd81f4923c21bf6e9a7fbd069 upstream.

CPUID.1F/B does not enumerate Package level explicitly, instead, all the
APIC-ID bits above the enumerated levels are assumed to be package ID
bits.

Current code gets package ID by shifting out all the APIC-ID bits that
Linux supports, rather than shifting out all the APIC-ID bits that
CPUID.1F enumerates. This introduces problems when CPUID.1F enumerates a
level that Linux does not support.

For example, on a single package AlderLake-N, there are 2 Ecore Modules
with 4 atom cores in each module.  Linux does not support the Module
level and interprets the Module ID bits as package ID and erroneously
reports a multi module system as a multi-package system.

Fix this by using APIC-ID bits above all the CPUID.1F enumerated levels
as package ID.

[ dhansen: spelling fix ]

Fixes: 7745f03eb395 ("x86/topology: Add CPUID.1F multi-die/package support")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-4-rui.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: dec: Handle the case where find_format fails

commit 06a2da340f762addc5935bf851d95b14d4692db2 upstream.

Debugging the decoder on msm8916 I noticed the vdec probe was crashing if
the fmt pointer was NULL.

A similar fix from Colin Ian King found by Coverity was implemented for the
encoder. Implement the same fix on the decoder.

Fixes: 7472c1c69138 ("[media] media: venus: vdec: add video decoder files")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mceusb: set timeout to at least timeout provided

commit 20b794ddce475ed012deb365000527c17b3e93e6 upstream.

By rounding down, the actual timeout can be lower than requested. As a
result, long spaces just below the requested timeout can be incorrectly
reported as timeout and truncated.

Fixes: 877f1a7cee3f ("media: rc: mceusb: allow the timeout to be configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ipu3-imgu: Fix NULL pointer dereference in active selection access

commit b9eb3ab6f30bf32f7326909f17949ccb11bab514 upstream.

What the IMGU driver did was that it first acquired the pointers to active
and try V4L2 subdev state, and only then figured out which one to use.

The problem with that approach and a later patch (see Fixes: tag) is that
as sd_state argument to v4l2_subdev_get_try_crop() et al is NULL, there is
now an attempt to dereference that.

Fix this.

Also rewrap lines a little.

Fixes: 0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct")
Cc: stable@vger.kernel.org # for v5.14 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: vgic: Fix exit condition in scan_its_table()

commit c000a2607145d28b06c697f968491372ea56c23a upstream.

With some PCIe topologies, restoring a guest fails while
parsing the ITS device tables.

Reproducer hints:
1. Create ARM virt VM with pxb-pcie bus which adds
   extra host bridges, with qemu command like:

```
  -device pxb-pcie,bus_nr=8,id=pci.x,numa_node=0,bus=pcie.0 \
  -device pcie-root-port,..,bus=pci.x \
  ...
  -device pxb-pcie,bus_nr=37,id=pci.y,numa_node=1,bus=pcie.0 \
  -device pcie-root-port,..,bus=pci.y \
  ...

```
2. Ensure the guest uses 2-level device table
3. Perform VM migration which calls save/restore device tables

In that setup, we get a big "offset" between 2 device_ids,
which makes unsigned "len" round up a big positive number,
causing the scan loop to continue with a bad GPA. For example:

1. L1 table has 2 entries;
2. and we are now scanning at L2 table entry index 2075 (pointed
   to by L1 first entry)
3. if next device id is 9472, we will get a big offset: 7397;
4. with unsigned 'len', 'len -= offset * esz', len will underflow to a
   positive number, mistakenly into next iteration with a bad GPA;
   (It should break out of the current L2 table scanning, and jump
   into the next L1 table entry)
5. that bad GPA fails the guest read.

Fix it by stopping the L2 table scan when the next device id is
outside of the current table, allowing the scan to continue from
the next L1 table entry.

Thanks to Eric Auger for the fix suggestion.

Fixes: 920a7a8fa92a ("KVM: arm64: vgic-its: Add infrastructure for tableookup")
Suggested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Eric Ren <renzhengeek@gmail.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d9c3a564af9e2c5bf63f48a7dcbf08cd593c5c0b.1665802985.git.renzhengeek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: Add support for arch compat vm ioctls

commit ed51862f2f57cbce6fed2d4278cfe70a490899fd upstream.

We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.

Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages

commit 12df140f0bdfae5dcfc81800970dd7f6f632e00c upstream.

The h->*_huge_pages counters are protected by the hugetlb_lock, but
alloc_huge_page has a corner case where it can decrement the counter
outside of the lock.

This could lead to a corrupted value of h->resv_huge_pages, which we have
observed on our systems.

Take the hugetlb_lock before decrementing h->resv_huge_pages to avoid a
potential race.

Link: https://lkml.kernel.org/r/20221017202505.0e6a4fcd@imladris.surriel.com
Fixes: a88c76954804 ("mm: hugetlb: fix hugepage memory leak caused by wrong reserve count")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Glen McCready <gkmccready@meta.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix sdma doorbell init ordering on APUs

commit 50b0e4d4da09fa501e722af886f97e60a4f820d6 upstream.

Commit 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
uncovered a bug in amdgpu that required a reordering of the driver
init sequence to avoid accessing a special register on the GPU
before it was properly set up leading to an PCI AER error.  This
reordering uncovered a different hw programming ordering dependency
in some APUs where the SDMA doorbells need to be programmed before
the GFX doorbells. To fix this, move the SDMA doorbell programming
back into the soc15 common code, but use the actual doorbell range
values directly rather than the values stored in the ring structure
since those will not be initialized at this point.

This is a partial revert, but with the doorbell assignment
fixed so the proper doorbell index is set before it's used.

Fixes: e3163bc8ffdfdb ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: qcom: fix memory leak in error path

commit 9f42cf54403a42cb092636804d2628d8ecf71e75 upstream.

If for some reason the speedbin length is incorrect, then there is a
memory leak in the error path because we never free the speedbin buffer.
This commit fixes the error path to always free the speedbin buffer.

Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/resctrl: Fix min_cbm_bits for AMD

commit 67bf6493449b09590f9f71d7df29efb392b12d25 upstream.

AMD systems support zero CBM (capacity bit mask) for cache allocation.
That is reflected in rdt_init_res_defs_amd() by:

  r->cache.arch_has_empty_bitmaps = true;

However given the unified code in cbm_validate(), checking for:

  val == 0 && !arch_has_empty_bitmaps

is not enough because of another check in cbm_validate():

  if ((zero_bit - first_bit) < r->cache.min_cbm_bits)

The default value of r->cache.min_cbm_bits = 1.

Leading to:

  $ cd /sys/fs/resctrl
  $ mkdir foo
  $ cd foo
  $ echo L3:0=0 > schemata
    -bash: echo: write error: Invalid argument
  $ cat /sys/fs/resctrl/info/last_cmd_status
    Need at least 1 bits in the mask

Initialize the min_cbm_bits to 0 for AMD. Also, remove the default
setting of min_cbm_bits and initialize it separately.

After the fix:

  $ cd /sys/fs/resctrl
  $ mkdir foo
  $ cd foo
  $ echo L3:0=0 > schemata
  $ cat /sys/fs/resctrl/info/last_cmd_status
    ok

Fixes: 316e7f901f5a ("x86/resctrl: Add struct rdt_cache::arch_has_{sparse, empty}_bitmaps")
Co-developed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/20220517001234.3137157-1-eranian@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci: Match EM_MAX_SLOTS with SATA_PMP_MAX_PORTS

commit 1e41e693f458eef2d5728207dbd327cd3b16580a upstream.

UBSAN complains about array-index-out-of-bounds:
[ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41
[ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]'
[ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu
[ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010
[ 1.980718] kernel: Call Trace:
[ 1.980721] kernel: <TASK>
[ 1.980723] kernel: show_stack+0x52/0x58
[ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f
[ 1.980734] kernel: dump_stack+0x10/0x12
[ 1.980736] kernel: ubsan_epilogue+0x9/0x45
[ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci]
[ 1.980748] kernel: ata_qc_issue+0x135/0x240
[ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580
[ 1.980754] kernel: ? vprintk_default+0x1d/0x20
[ 1.980759] kernel: ata_exec_internal+0x67/0xa0
[ 1.980762] kernel: sata_pmp_read+0x8d/0xc0
[ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90
[ 1.980768] kernel: sata_pmp_attach+0x8b/0x310
[ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0
[ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30
[ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci]
[ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci]
[ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci]
[ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0
[ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560
[ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40
[ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci]
[ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600
[ 1.980810] kernel: ata_scsi_error+0x9c/0xd0
[ 1.980813] kernel: scsi_error_handler+0xa1/0x180
[ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0
[ 1.980820] kernel: kthread+0x12a/0x150
[ 1.980823] kernel: ? set_kthread_struct+0x50/0x50
[ 1.980826] kernel: ret_from_fork+0x22/0x30
[ 1.980831] kernel: </TASK>

This happens because sata_pmp_init_links() initialize link->pmp up to
SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array.

I can't find the maximum Enclosure Management ports specified in AHCI
spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier
Information" can utilize 4 bits, which implies it can support up to 16
ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the
issue.

BugLink: https://bugs.launchpad.net/bugs/1970074
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci-imx: Fix MODULE_ALIAS

commit 979556f1521a835a059de3b117b9c6c6642c7d58 upstream.

'ahci:' is an invalid prefix, preventing the module from autoloading.
Fix this by using the 'platform:' prefix and DRV_NAME.

Fixes: 9e54eae23bc9 ("ahci_imx: add ahci sata support on imx platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon/coretemp: Handle large core ID value

commit 7108b80a542b9d65e44b36d64a700a83658c0b73 upstream.

The coretemp driver supports up to a hard-coded limit of 128 cores.

Today, the driver can not support a core with an ID above that limit.
Yet, the encoding of core ID's is arbitrary (BIOS APIC-ID) and so they
may be sparse and they may be large.

Update the driver to map arbitrary core ID numbers into appropriate
array indexes so that 128 cores can be supported, no matter the encoding
of core ID's.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-3-rui.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/AMD: Apply the patch early on every logical thread

commit e7ad18d1169c62e6c78c01ff693fd362d9d65278 upstream.

Currently, the patch application logic checks whether the revision
needs to be applied on each logical CPU (SMT thread). Therefore, on SMT
designs where the microcode engine is shared between the two threads,
the application happens only on one of them as that is enough to update
the shared microcode engine.

However, there are microcode patches which do per-thread modification,
see Link tag below.

Therefore, drop the revision check and try applying on each thread. This
is what the BIOS does too so this method is very much tested.

Btw, change only the early paths. On the late loading paths, there's no
point in doing per-thread modification because if is it some case like
in the bugzilla below - removing a CPUID flag - the kernel cannot go and
un-use features it has detected are there early. For that, one should
use early loading anyway.

  [ bp: Fixes does not contain the oldest commit which did check for
    equality but that is good enough. ]

Fixes: 8801b3fcb574 ("x86/microcode/AMD: Rework container parsing")
Reported-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216211
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter

commit 61775d54d674ff8ec3658495e0dbc537227dc5c1 upstream.

When we compile-in the CCI along with the imx412 driver and run on the RB5
we see that i2c_add_adapter() causes the probe of the imx412 driver to
happen.

This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c
fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has
not completed to pm_runtime_enable(dev).

Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding
the i2c adapter.

Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: qcom: fix writes in read-only memory region

commit 01039fb8e90c9cb684430414bff70cea9eb168c5 upstream.

This commit fixes a kernel oops because of a write in some read-only memory:

[    9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8
..snip..
[    9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP
..snip..
[    9.269161] Call trace:
[    9.276271]  __memcpy+0x5c/0x230
[    9.278531]  snprintf+0x58/0x80
[    9.282002]  qcom_cpufreq_msm8939_name_version+0xb4/0x190
[    9.284869]  qcom_cpufreq_probe+0xc8/0x39c
..snip..

The following line defines a pointer that point to a char buffer stored
in read-only memory:

char *pvs_name = "speedXX-pvsXX-vXX";

This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the
XX values get overridden by the qcom_cpufreq_krait_name_version function. Since
the template is actually stored in read-only memory, when the function
executes the following call we get an oops:

snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
 speed, pvs, pvs_ver);

To fix this issue, we instead store the template name onto the stack by
using the following syntax:

char pvs_name_buffer[] = "speedXX-pvsXX-vXX";

Because the `pvs_name` needs to be able to be assigned to NULL, the
template buffer is stored in the pvs_name_buffer and not under the
pvs_name variable.

Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context()

commit abe3c631447dcd1ba7af972fe6f054bee6f136fa upstream.

The following warning was triggered on a hardware environment:

  SELinux: Converting 162 SID table entries...
  BUG: sleeping function called from invalid context at
       __might_sleep+0x60/0x74 0x0
  in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar
  CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1
  Call trace:
   dump_backtrace+0x0/0x1c8
   show_stack+0x18/0x28
   dump_stack+0xe8/0x15c
   ___might_sleep+0x168/0x17c
   __might_sleep+0x60/0x74
   __kmalloc_track_caller+0xa0/0x7dc
   kstrdup+0x54/0xac
   convert_context+0x48/0x2e4
   sidtab_context_to_sid+0x1c4/0x36c
   security_context_to_sid_core+0x168/0x238
   security_context_to_sid_default+0x14/0x24
   inode_doinit_use_xattr+0x164/0x1e4
   inode_doinit_with_dentry+0x1c0/0x488
   selinux_d_instantiate+0x20/0x34
   security_d_instantiate+0x70/0xbc
   d_splice_alias+0x4c/0x3c0
   ext4_lookup+0x1d8/0x200 [ext4]
   __lookup_slow+0x12c/0x1e4
   walk_component+0x100/0x200
   path_lookupat+0x88/0x118
   filename_lookup+0x98/0x130
   user_path_at_empty+0x48/0x60
   vfs_statx+0x84/0x140
   vfs_fstatat+0x20/0x30
   __se_sys_newfstatat+0x30/0x74
   __arm64_sys_newfstatat+0x1c/0x2c
   el0_svc_common.constprop.0+0x100/0x184
   do_el0_svc+0x1c/0x2c
   el0_svc+0x20/0x34
   el0_sync_handler+0x80/0x17c
   el0_sync+0x13c/0x140
  SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is
           not valid (left unmapped).

It was found that within a critical section of spin_lock_irqsave in
sidtab_context_to_sid(), convert_context() (hooked by
sidtab_convert_params.func) might cause the process to sleep via
allocating memory with GFP_KERNEL, which is problematic.

As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func
has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL.
Therefore, fix this problem by adding a gfp_t argument for
convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC
properly in individual callers.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221018120111.1474581-1-gongruiqi1@huawei.com/
Reported-by: Tan Ninghao <tanninghao1@huawei.com>
Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance")
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: wrap long BUG() output lines, tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix BUG when iput after ocfs2_mknod fails

commit 759a7c6126eef5635506453e9b9d55a6a3ac2084 upstream.

Commit b1529a41f777 "ocfs2: should reclaim the inode if
'__ocfs2_mknod_locked' returns an error" tried to reclaim the claimed
inode if __ocfs2_mknod_locked() fails later.  But this introduce a race,
the freed bit may be reused immediately by another thread, which will
update dinode, e.g.  i_generation.  Then iput this inode will lead to BUG:
inode->i_generation != le32_to_cpu(fe->i_generation)

We could make this inode as bad, but we did want to do operations like
wipe in some cases.  Since the claimed inode bit can only affect that an
dinode is missing and will return back after fsck, it seems not a big
problem.  So just leave it as is by revert the reclaim logic.

Link: https://lkml.kernel.org/r/20221017130227.234480-1-joseph.qi@linux.alibaba.com
Fixes: b1529a41f777 ("ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an error")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Yan Wang <wangyan122@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: clear dinode links count in case of error

commit 28f4821b1b53e0649706912e810c6c232fc506f9 upstream.

In ocfs2_mknod(), if error occurs after dinode successfully allocated,
ocfs2 i_links_count will not be 0.

So even though we clear inode i_nlink before iput in error handling, it
still won't wipe inode since we'll refresh inode from dinode during inode
lock.  So just like clear inode i_nlink, we clear ocfs2 i_links_count as
well.  Also do the same change for ocfs2_symlink().

Link: https://lkml.kernel.org/r/20221017130227.234480-2-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Yan Wang <wangyan122@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: enhance unsupported compat RO flags handling

commit 81d5d61454c365718655cfc87d8200c84e25d596 upstream.

Currently there are two corner cases not handling compat RO flags
correctly:

- Remount
  We can still mount the fs RO with compat RO flags, then remount it RW.
  We should not allow any write into a fs with unsupported RO flags.

- Still try to search block group items
  In fact, behavior/on-disk format change to extent tree should not
  need a full incompat flag.

  And since we can ensure fs with unsupported RO flags never got any
  writes (with above case fixed), then we can even skip block group
  items search at mount time.

This patch will enhance the unsupported RO compat flags by:

- Reject read-write remount if there are unsupported RO compat flags

- Go dummy block group items directly for unsupported RO compat flags
  In fact, only changes to chunk/subvolume/root/csum trees should go
  incompat flags.

The latter part should allow future change to extent tree to be compat
RO flags.

Thus this patch also needs to be backported to all stable trees.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/pt: Relax address filter validation

commit c243cecb58e3905baeace8827201c14df8481e2a upstream.

The requirement for 64-bit address filters is that they are canonical
addresses. In other respects any address range is allowed which would
include user space addresses.

That can be useful for tracing virtual machine guests because address
filtering can be used to advantage in place of current privilege level
(CPL) filtering.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220131072453.2839535-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: errata: Remove AES hwcap for COMPAT tasks

commit 44b3834b2eed595af07021b1c64e6f9bc396398b upstream.

Cortex-A57 and Cortex-A72 have an erratum where an interrupt that
occurs between a pair of AES instructions in aarch32 mode may corrupt
the ELR. The task will subsequently produce the wrong AES result.

The AES instructions are part of the cryptographic extensions, which are
optional. User-space software will detect the support for these
instructions from the hwcaps. If the platform doesn't support these
instructions a software implementation should be used.

Remove the hwcap bits on affected parts to indicate user-space should
not use the AES instructions.

Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220714161523.279570-3-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[florian: resolved conflicts in arch/arm64/tools/cpucaps and cpu_errata.c]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: improve sg exit condition

commit aef11279888c00e1841a3533a35d279285af3a51 upstream.

The exit condition to quit iterating over the sg_list, while encoding
the sg entries, has to consider the case that the dma_len of the entry
could be zero. This patch takes this condition to account.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-4-m.grzeschik@pengutronix.de
Cc: Dan Vacura <w36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: giveback vb2 buffer on req complete

commit 9b969f93bcef9b3d9e92f1810e22bbd6c344a0e5 upstream.

On uvc_video_encode_isoc_sg the mapped vb2 buffer is returned
to early. Only after the last usb_request worked with the buffer
it is allowed to give it back to vb2. This patch fixes that.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-3-m.grzeschik@pengutronix.de
Cc: Dan Vacura <w36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: rework uvcg_queue_next_buffer to uvcg_complete_buffer

commit 61aa709ca58a0dbeeb817bfa9230c1a92979f2c6 upstream.

The function uvcg_queue_next_buffer is used different than its name
suggests. The return value nextbuf is never used by any caller. This
patch reworks the function to its actual purpose, by removing the unused
code and renaming it. The function name uvcg_complete_buffer makes it
more clear that it is actually marking the current video buffer as
complete.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-2-m.grzeschik@pengutronix.de
Cc: Dan Vacura <w36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: use on returned header len in video_encode_isoc_sg

commit f262ce66d40cc6858d1fcb11e7b7f960448a4f38 upstream.

The function uvc_video_encode_header function returns the number of
bytes used for the header. We change the video_encode_isoc_sg function
to use the returned header_len rather than UVCG_REQUEST_HEADER_LEN and
make the encode function more flexible.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211022093223.26493-1-m.grzeschik@pengutronix.de
Cc: Dan Vacura <w36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: consistently use define for headerlen

commit 859c675d84d488e2f9b515c713ea890c9f045f0c upstream.

The uvc request headerlen of 2 was defined as UVCG_REQUEST_HEADER_LEN
in commit e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support").
We missed to use it consistently. This patch fixes that.

Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211018072059.11465-1-m.grzeschik@pengutronix.de
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Dan Vacura <w36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/mm: Consolidate TCR_EL1 fields

commit e921da6bc7cac5f0e8458fe5df18ae08eb538f54 upstream.

This renames and moves SYS_TCR_EL1_TCMA1 and SYS_TCR_EL1_TCMA0 definitions
into pgtable-hwdef.h thus consolidating all TCR fields in a single header.
This does not cause any functional change.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643121513-21854-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Cc: Evgenii Stepanov <eugenis@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: add PID for the Lenovo OneLink+ Dock

commit 1bd3a383075c64d638e65d263c9267b08ee7733c upstream.

The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as
a broken CDC device by default. Add the custom Lenovo PID to the r8152
driver to support it properly.

Also, systems compatible with this dock provide a BIOS option to enable
MAC address passthrough (as per Lenovo document "ThinkPad Docking
Solutions 2017"). Add the custom PID to the MAC passthrough list too.

Tested on a ThinkPad 13 1st gen with the expected results:

passthrough disabled: Invalid header when reading pass-thru MAC addr
passthrough enabled:  Using pass-thru MAC addr XX:XX:XX:XX:XX:XX

Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.75

Link: https://lore.kernel.org/r/20221024113044.976326639@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io-wq: Fix memory leak in worker creation

commit 996d3efeb091c503afd3ee6b5e20eabf446fd955 upstream.

If the CPU mask allocation for a node fails, then the memory allocated for
the 'io_wqe' struct of the current node doesn't get freed on the error
handling path, since it has not yet been added to the 'wqes' array.

This was spotted when fuzzing v6.1-rc1 with Syzkaller:
BUG: memory leak
unreferenced object 0xffff8880093d5000 (size 1024):
  comm "syz-executor.2", pid 7701, jiffies 4295048595 (age 13.900s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000cb463369>] __kmem_cache_alloc_node+0x18e/0x720
    [<00000000147a3f9c>] kmalloc_node_trace+0x2a/0x130
    [<000000004e107011>] io_wq_create+0x7b9/0xdc0
    [<00000000c38b2018>] io_uring_alloc_task_context+0x31e/0x59d
    [<00000000867399da>] __io_uring_add_tctx_node.cold+0x19/0x1ba
    [<000000007e0e7a79>] io_uring_setup.cold+0x1b80/0x1dce
    [<00000000b545e9f6>] __x64_sys_io_uring_setup+0x5d/0x80
    [<000000008a8a7508>] do_syscall_64+0x5d/0x90
    [<000000004ac08bec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 0e03496d1967 ("io-wq: use private CPU mask")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20221020014710.902201-1-rafaelmendsr@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcov: support GCC 12.1 and newer compilers

commit 977ef30a7d888eeb52fb6908f99080f33e5309a8 upstream.

Starting with GCC 12.1, the created .gcda format can't be read by gcov
tool.  There are 2 significant changes to the .gcda file format that
need to be supported:

a) [gcov: Use system IO buffering]
   (23eb66d1d46a34cb28c4acbdf8a1deb80a7c5a05) changed that all sizes in
   the format are in bytes and not in words (4B)

b) [gcov: make profile merging smarter]
   (72e0c742bd01f8e7e6dcca64042b9ad7e75979de) add a new checksum to the
   file header.

Tested with GCC 7.5, 10.4, 12.2 and the current master.

Link: https://lkml.kernel.org/r/624bda92-f307-30e9-9aaa-8cc678b2dfb2@suse.cz
Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: intel_powerclamp: Use first online CPU as control_cpu

commit 4bb7f6c2781e46fc5bd00475a66df2ea30ef330d upstream.

Commit 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead
of smp_processor_id() to avoid crash") fixed an issue related to using
smp_processor_id() in preemptible context by replacing it with a pair
of get_cpu()/put_cpu(), but what is needed there really is any online
CPU and not necessarily the one currently running the code.  Arguably,
getting the one that's running the code in there is confusing.

For this reason, simply give the control CPU role to the first online
one which automatically will be CPU0 if it is online, so one check
can be dropped from the code for an added benefit.

Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/
Fixes: 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: continue to expand file system when the target size doesn't reach

commit df3cb754d13d2cd5490db9b8d536311f8413a92e upstream.

When expanding a file system from (16TiB-2MiB) to 18TiB, the operation
exits early which leads to result inconsistency between resize2fs and
Ext4 kernel driver.

=== before ===
○ → resize2fs /dev/mapper/thin
resize2fs 1.45.5 (07-Jan-2020)
Filesystem at /dev/mapper/thin is mounted on /mnt/test; on-line resizing required
old_desc_blocks = 2048, new_desc_blocks = 2304
The filesystem on /dev/mapper/thin is now 4831837696 (4k) blocks long.

[  865.186308] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[  912.091502] dm-4: detected capacity change from 34359738368 to 38654705664
[  970.030550] dm-5: detected capacity change from 34359734272 to 38654701568
[ 1000.012751] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 1000.012878] EXT4-fs (dm-5): resized filesystem to 4294967296

=== after ===
[  129.104898] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[  143.773630] dm-4: detected capacity change from 34359738368 to 38654705664
[  198.203246] dm-5: detected capacity change from 34359734272 to 38654701568
[  207.918603] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[  207.918754] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[  207.918758] EXT4-fs (dm-5): Converting file system to meta_bg
[  207.918790] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[  221.454050] EXT4-fs (dm-5): resized to 4658298880 blocks
[  227.634613] EXT4-fs (dm-5): resized filesystem to 4831837696

Signed-off-by: Jerry Lee <jerrylee@qnap.com>
Link: https://lore.kernel.org/r/PU1PR04MB22635E739BD21150DC182AC6A18C9@PU1PR04MB2263.apcprd04.prod.outlook.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5

commit 0a6de78cff600cb991f2a1b7ed376935871796a0 upstream.

When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:

  /tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported

Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:

  .Ldebug_loc0:
          .byte   4                               # DW_LLE_offset_pair
          .uleb128 .Lfunc_begin0-.Lfunc_begin0    #   starting offset
          .uleb128 .Ltmp1-.Lfunc_begin0           #   ending offset
          .byte   1                               # Loc expr size
          .byte   90                              # DW_OP_reg10
          .byte   0                               # DW_LLE_end_of_list

  .Ldebug_ranges0:
          .byte   4                               # DW_RLE_offset_pair
          .uleb128 .Ltmp6-.Lfunc_begin0           #   starting offset
          .uleb128 .Ltmp27-.Lfunc_begin0          #   ending offset
          .byte   4                               # DW_RLE_offset_pair
          .uleb128 .Ltmp28-.Lfunc_begin0          #   starting offset
          .uleb128 .Ltmp30-.Lfunc_begin0          #   ending offset
          .byte   0                               # DW_RLE_end_of_list

There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.

To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.

Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: Fix conflicts due to lack of f9b3cd24578401e]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT

commit bb1435f3f575b5213eaf27434efa3971f51c01de upstream.

CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT does not give explicit
-gdwarf-* flag. The actual DWARF version is up to the toolchain.

The combination of GCC and GAS works fine, and Clang with the integrated
assembler is good too.

The combination of Clang and GAS is tricky, but at least, the -g flag
works for Clang <=13, which defaults to DWARF v4.

Clang 14 switched its default to DWARF v5.

Now, CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT has the same issue as
addressed by commit 98cd6f521f10 ("Kconfig: allow explicit opt in to
DWARF v5").

CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y for Clang >= 14 and
GAS < 2.35 produces a ton of errors like follows:

  /tmp/main-c2741c.s: Assembler messages:
  /tmp/main-c2741c.s:109: Error: junk at end of line, first unrecognized character is `"'
  /tmp/main-c2741c.s:109: Error: file number less than one

Add 'depends on' to check toolchains.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
[nathan: Fix conflict due to lack of f9b3cd24578401e]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5

commit 4f001a21080ff2e2f0e1c3692f5e119aedbb3bc1 upstream.

Commit c0a5c81ca9be ("Kconfig.debug: drop GCC 5+ version check for
DWARF5") could have cleaned up the code a bit more.

"CC_IS_CLANG &&" is unneeded. No functional change is intended.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
[nathan: Only apply to DWARF5, as 5.15 does not have 32ef9e5054ec032]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix build breakage with CONFIG_DEBUG_FS=n

commit 2130b87b2273389cafe6765bf09ef564cda01407 upstream.

After commit 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr
transition"), a build with CONFIG_DEBUG_FS=n is broken due to a
misplaced brace, along the lines of:

  In file included from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_trace.h:39,
                   from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:41:
  drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: At top level:
  ./include/drm/drm_atomic.h:864:9: error: expected identifier or ‘(’ before ‘for’
    864 |         for ((__i) = 0;                                                 \
        |         ^~~
  drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8317:9: note: in expansion of macro ‘for_each_new_crtc_in_state’
   8317 |         for_each_new_crtc_in_state(state, crtc, new_crtc_state, j)
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~

Move the brace within the #ifdef so that the file can be built with or
without CONFIG_DEBUG_FS.

Fixes: 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr transition")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ieee802154: don't warn zero-sized raw_sendmsg()

[ Upstream commit b12e924a2f5b960373459c8f8a514f887adf5cac ]

syzbot is hitting skb_assert_len() warning at __dev_queue_xmit() [1],
for PF_IEEE802154 socket's zero-sized raw_sendmsg() request is hitting
__dev_queue_xmit() with skb->len == 0.

Since PF_IEEE802154 socket's zero-sized raw_sendmsg() request was
able to return 0, don't call __dev_queue_xmit() if packet length is 0.

  ----------
  #include <sys/socket.h>
  #include <netinet/in.h>

  int main(int argc, char *argv[])
  {
    struct sockaddr_in addr = { .sin_family = AF_INET, .sin_addr.s_addr = htonl(INADDR_LOOPBACK) };
    struct iovec iov = { };
    struct msghdr hdr = { .msg_name = &addr, .msg_namelen = sizeof(addr), .msg_iov = &iov, .msg_iovlen = 1 };
    sendmsg(socket(PF_IEEE802154, SOCK_RAW, 0), &hdr, 0);
    return 0;
  }
  ----------

Note that this might be a sign that commit fd1894224407c484 ("bpf: Don't
redirect packets with invalid pkt_len") should be reverted, for
skb->len == 0 was acceptable for at least PF_IEEE802154 socket.

Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4
Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com>
Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221005014750.3685555-2-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "net/ieee802154: reject zero-sized raw_sendmsg()"

[ Upstream commit 2eb2756f6c9e9621e022d78321ce40a62c4520b5 ]

This reverts commit 3a4d061c699bd3eedc80dc97a4b2a2e1af83c6f5.

There is a v2 which does return zero if zero length is given.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221005014750.3685555-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: davinci_mdio: fix build for mdio bitbang uses

commit 35bbe652c421037822aba29423f5f1f7d0d69f3f upstream.

davinci_mdio.c uses mdio bitbang APIs, so it should select
MDIO_BITBANG to prevent build errors.

arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_remove':
drivers/net/ethernet/ti/davinci_mdio.c:649: undefined reference to `free_mdio_bitbang'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_probe':
drivers/net/ethernet/ti/davinci_mdio.c:545: undefined reference to `alloc_mdio_bitbang'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_read':
drivers/net/ethernet/ti/davinci_mdio.c:236: undefined reference to `mdiobb_read'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_write':
drivers/net/ethernet/ti/davinci_mdio.c:253: undefined reference to `mdiobb_write'

Fixes: d04807b80691 ("net: ethernet: ti: davinci_mdio: Add workaround for errata i2329")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ravi Gunasekaran <r-gunasekaran@ti.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20220824024216.4939-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()

commit 285febabac4a16655372d23ff43e89ff6f216691 upstream.

commit 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is
initialized") moves wbt_set_write_cache() before rq_qos_add(), which
is wrong because wbt_rq_qos() is still NULL.

Fix the problem by removing wbt_set_write_cache() and setting 'rwb->wc'
directly. Noted that this patch also remove the redundant setting of
'rab->wc'.

Fixes: 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is initialized")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081045.77ddf59b-yujie.liu@intel.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221009101038.1692875-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix last interface check for registration

commit 39efc9c8a973ddff5918191525d1679d0fb368ea upstream.

The recent fix in commit 6392dcd1d0c7 ("ALSA: usb-audio: Register card
at the last interface") tried to delay the card registration until the
last found interface is probed.  It assumed that the probe callback
gets called for those later interfaces, but it's not always true; as
the driver loops over the descriptor and probes the matching ones,
it's not separately called via multiple probe calls.  This results in
the missing card registration, i.e. no sound device.

For addressing this problem, replace the check whether the last
interface is processed with usb_interface_claimed() instead of the
comparison with the probe interface number.

Fixes: 6392dcd1d0c7 ("ALSA: usb-audio: Register card at the last interface")
Link: https://lore.kernel.org/r/20220915085947.7922-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ieee802154: return -EINVAL for unknown addr type

commit 30393181fdbc1608cc683b4ee99dcce05ffcc8c7 upstream.

This patch adds handling to return -EINVAL for an unknown addr type. The
current behaviour is to return 0 as successful but the size of an
unknown addr type is not defined and should return an error like -EINVAL.

Fixes: 94160108a70c ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: fix UAF in hugetlb_handle_userfault

commit 958f32ce832ba781ac20e11bb2d12a9352ea28fc upstream.

The vma_lock and hugetlb_fault_mutex are dropped before handling userfault
and reacquire them again after handle_userfault(), but reacquire the
vma_lock could lead to UAF[1,2] due to the following race,

hugetlb_fault
  hugetlb_no_page
    /*unlock vma_lock */
    hugetlb_handle_userfault
      handle_userfault
        /* unlock mm->mmap_lock*/
                                           vm_mmap_pgoff
                                             do_mmap
                                               mmap_region
                                                 munmap_vma_range
                                                   /* clean old vma */
        /* lock vma_lock again  <--- UAF */
    /* unlock vma_lock */

Since the vma_lock will unlock immediately after
hugetlb_handle_userfault(), let's drop the unneeded lock and unlock in
hugetlb_handle_userfault() to fix the issue.

[1] https://lore.kernel.org/linux-mm/000000000000d5e00a05e834962e@google.com/
[2] https://lore.kernel.org/linux-mm/20220921014457.1668-1-liuzixian4@huawei.com/
Link: https://lkml.kernel.org/r/20220923042113.137273-1-liushixin2@huawei.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: syzbot+193f9cee8638750b23cf@syzkaller.appspotmail.com
Reported-by: Liu Zixian <liuzixian4@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>