netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger

[ Upstream commit 259eb32971e9eb24d1777a28d82730659f50fdcb ]

Module reference is bumped for each user, this should not ever happen.

But BUG_ON check should use rcu_access_pointer() instead.

If this ever happens, do WARN_ON_ONCE() instead of BUG_ON() and
consolidate pointer check under the rcu read side lock section.

Fixes: fab4085f4e24 ("netfilter: log: nf_log_packet() as real unified interface")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: restrict tunnel object to NFPROTO_NETDEV

[ Upstream commit 776d451648443f9884be4a1b4e38e8faf1c621f9 ]

Bail out on using the tunnel dst template from other than netdev family.
Add the infrastructure to check for the family in objects.

Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: correct window scaling with retransmitted SYN

[ Upstream commit fb366fc7541a1de521ab3df58471746aa793b833 ]

commit c7aab4f17021 ("netfilter: nf_conntrack_tcp: re-init for syn packets
only") introduces a bug where SYNs in ORIGINAL direction on reused 5-tuple
result in incorrect window scale negotiation. This commit merged the SYN
re-initialization and simultaneous open or SYN retransmits cases. Merging
this block added the logic in tcp_init_sender() that performed window scale
negotiation to the retransmitted syn case. Previously. this would only
result in updating the sender's scale and flags. After the merge the
additional logic results in improperly clearing the scale in ORIGINAL
direction before any packets in the REPLY direction are received. This
results in packets incorrectly being marked invalid for being
out-of-window.

This can be reproduced with the following trace:

Packet Sequence:
> Flags [S], seq 1687765604, win 62727, options [.. wscale 7], length 0
> Flags [S], seq 1944817196, win 62727, options [.. wscale 7], length 0

In order to fix the issue, only evaluate window negotiation for packets
in the REPLY direction. This was tested with simultaneous open, fast
open, and the above reproduction.

Fixes: c7aab4f17021 ("netfilter: nf_conntrack_tcp: re-init for syn packets only")
Signed-off-by: Ryan Schaefer <ryanschf@amazon.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: add missing config for GENEVE

[ Upstream commit c9ec85153fea6873c52ed4f5055c87263f1b54f9 ]

l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl
for GRETAP, VXLAN and GENEVE.
Before testing it checks if the required module is available
and if not skips the tests accordingly.
Currently only GRETAP and VXLAN are tested because the GENEVE
module is missing.

Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Link: https://lore.kernel.org/r/20240130101157.196006-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

devlink: Fix referring to hw_addr attribute during state validation

[ Upstream commit 1a89e24f8bfd3e3562d69709c9d9cd185ded869b ]

When port function state change is requested, and when the driver
does not support it, it refers to the hw address attribute instead
of state attribute. Seems like a copy paste error.

Fix it by referring to the port function state attribute.

Fixes: c0bea69d1ca7 ("devlink: Validate port function request")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129191059.129030-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bridge: mcast: fix disabled snooping after long uptime

[ Upstream commit f5c3eb4b7251baba5cd72c9e93920e710ac8194a ]

The original idea of the delay_time check was to not apply multicast
snooping too early when an MLD querier appears. And to instead wait at
least for MLD reports to arrive before switching from flooding to group
based, MLD snooped forwarding, to avoid temporary packet loss.

However in a batman-adv mesh network it was noticed that after 248 days of
uptime 32bit MIPS based devices would start to signal that they had
stopped applying multicast snooping due to missing queriers - even though
they were the elected querier and still sending MLD queries themselves.

While time_is_before_jiffies() generally is safe against jiffies
wrap-arounds, like the code comments in jiffies.h explain, it won't
be able to track a difference larger than ULONG_MAX/2. With a 32bit
large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS
devices running OpenWrt this would result in a difference larger than
ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and
time_is_before_jiffies() would then start to return false instead of
true. Leading to multicast snooping not being applied to multicast
packets anymore.

Fix this issue by using a proper timer_list object which won't have this
ULONG_MAX/2 difference limitation.

Fixes: b00589af3b04 ("bridge: disable snooping if there is no querier")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240127175033.9640-1-linus.luessing@c0d3.blue
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: Add missing matchall classifier

[ Upstream commit b40f873a7c80dbafbb6f4a7a569f2dcaf969d283 ]

One of the test cases in the test_bridge_backup_port.sh selftest relies
on a matchall classifier to drop unrelated traffic so that the Tx drop
counter on the VXLAN device will only be incremented as a result of
traffic generated by the test.

However, the configuration option for the matchall classifier is
missing from the configuration file which might explain the failures we
see in the netdev CI [1].

Fix by adding CONFIG_NET_CLS_MATCHALL to the configuration file.

[1]
 # Backup nexthop ID - invalid IDs
 # -------------------------------
 [...]
 # TEST: Forwarding out of vx0                                         [ OK ]
 # TEST: No forwarding using backup nexthop ID                         [ OK ]
 # TEST: Tx drop increased                                             [FAIL]
 # TEST: IPv6 address family nexthop as backup nexthop                 [ OK ]
 # TEST: No forwarding out of swp1                                     [ OK ]
 # TEST: Forwarding out of vx0                                         [ OK ]
 # TEST: No forwarding using backup nexthop ID                         [ OK ]
 # TEST: Tx drop increased                                             [FAIL]
 [...]

Fixes: b408453053fb ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240129123703.1857843-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

llc: call sock_orphan() at release time

[ Upstream commit aa2b2eb3934859904c287bf5434647ba72e14c1c ]

syzbot reported an interesting trace [1] caused by a stale sk->sk_wq
pointer in a closed llc socket.

In commit ff7b11aa481f ("net: socket: set sock->sk to NULL after
calling proto_ops::release()") Eric Biggers hinted that some protocols
are missing a sock_orphan(), we need to perform a full audit.

In net-next, I plan to clear sock->sk from sock_orphan() and
amend Eric patch to add a warning.

[1]
 BUG: KASAN: slab-use-after-free in list_empty include/linux/list.h:373 [inline]
 BUG: KASAN: slab-use-after-free in waitqueue_active include/linux/wait.h:127 [inline]
 BUG: KASAN: slab-use-after-free in sock_def_write_space_wfree net/core/sock.c:3384 [inline]
 BUG: KASAN: slab-use-after-free in sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468
Read of size 8 at addr ffff88802f4fc880 by task ksoftirqd/1/27

CPU: 1 PID: 27 Comm: ksoftirqd/1 Not tainted 6.8.0-rc1-syzkaller-00049-g6098d87eaf31 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0xc4/0x620 mm/kasan/report.c:488
  kasan_report+0xda/0x110 mm/kasan/report.c:601
  list_empty include/linux/list.h:373 [inline]
  waitqueue_active include/linux/wait.h:127 [inline]
  sock_def_write_space_wfree net/core/sock.c:3384 [inline]
  sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468
  skb_release_head_state+0xa3/0x2b0 net/core/skbuff.c:1080
  skb_release_all net/core/skbuff.c:1092 [inline]
  napi_consume_skb+0x119/0x2b0 net/core/skbuff.c:1404
  e1000_unmap_and_free_tx_resource+0x144/0x200 drivers/net/ethernet/intel/e1000/e1000_main.c:1970
  e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3860 [inline]
  e1000_clean+0x4a1/0x26e0 drivers/net/ethernet/intel/e1000/e1000_main.c:3801
  __napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6576
  napi_poll net/core/dev.c:6645 [inline]
  net_rx_action+0x956/0xe90 net/core/dev.c:6778
  __do_softirq+0x21a/0x8de kernel/softirq.c:553
  run_ksoftirqd kernel/softirq.c:921 [inline]
  run_ksoftirqd+0x31/0x60 kernel/softirq.c:913
  smpboot_thread_fn+0x660/0xa10 kernel/smpboot.c:164
  kthread+0x2c6/0x3a0 kernel/kthread.c:388
  ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
 </TASK>

Allocated by task 5167:
  kasan_save_stack+0x33/0x50 mm/kasan/common.c:47
  kasan_save_track+0x14/0x30 mm/kasan/common.c:68
  unpoison_slab_object mm/kasan/common.c:314 [inline]
  __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:340
  kasan_slab_alloc include/linux/kasan.h:201 [inline]
  slab_post_alloc_hook mm/slub.c:3813 [inline]
  slab_alloc_node mm/slub.c:3860 [inline]
  kmem_cache_alloc_lru+0x142/0x6f0 mm/slub.c:3879
  alloc_inode_sb include/linux/fs.h:3019 [inline]
  sock_alloc_inode+0x25/0x1c0 net/socket.c:308
  alloc_inode+0x5d/0x220 fs/inode.c:260
  new_inode_pseudo+0x16/0x80 fs/inode.c:1005
  sock_alloc+0x40/0x270 net/socket.c:634
  __sock_create+0xbc/0x800 net/socket.c:1535
  sock_create net/socket.c:1622 [inline]
  __sys_socket_create net/socket.c:1659 [inline]
  __sys_socket+0x14c/0x260 net/socket.c:1706
  __do_sys_socket net/socket.c:1720 [inline]
  __se_sys_socket net/socket.c:1718 [inline]
  __x64_sys_socket+0x72/0xb0 net/socket.c:1718
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Freed by task 0:
  kasan_save_stack+0x33/0x50 mm/kasan/common.c:47
  kasan_save_track+0x14/0x30 mm/kasan/common.c:68
  kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640
  poison_slab_object mm/kasan/common.c:241 [inline]
  __kasan_slab_free+0x121/0x1b0 mm/kasan/common.c:257
  kasan_slab_free include/linux/kasan.h:184 [inline]
  slab_free_hook mm/slub.c:2121 [inline]
  slab_free mm/slub.c:4299 [inline]
  kmem_cache_free+0x129/0x350 mm/slub.c:4363
  i_callback+0x43/0x70 fs/inode.c:249
  rcu_do_batch kernel/rcu/tree.c:2158 [inline]
  rcu_core+0x819/0x1680 kernel/rcu/tree.c:2433
  __do_softirq+0x21a/0x8de kernel/softirq.c:553

Last potentially related work creation:
  kasan_save_stack+0x33/0x50 mm/kasan/common.c:47
  __kasan_record_aux_stack+0xba/0x100 mm/kasan/generic.c:586
  __call_rcu_common.constprop.0+0x9a/0x7b0 kernel/rcu/tree.c:2683
  destroy_inode+0x129/0x1b0 fs/inode.c:315
  iput_final fs/inode.c:1739 [inline]
  iput.part.0+0x560/0x7b0 fs/inode.c:1765
  iput+0x5c/0x80 fs/inode.c:1755
  dentry_unlink_inode+0x292/0x430 fs/dcache.c:400
  __dentry_kill+0x1ca/0x5f0 fs/dcache.c:603
  dput.part.0+0x4ac/0x9a0 fs/dcache.c:845
  dput+0x1f/0x30 fs/dcache.c:835
  __fput+0x3b9/0xb70 fs/file_table.c:384
  task_work_run+0x14d/0x240 kernel/task_work.c:180
  exit_task_work include/linux/task_work.h:38 [inline]
  do_exit+0xa8a/0x2ad0 kernel/exit.c:871
  do_group_exit+0xd4/0x2a0 kernel/exit.c:1020
  __do_sys_exit_group kernel/exit.c:1031 [inline]
  __se_sys_exit_group kernel/exit.c:1029 [inline]
  __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1029
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

The buggy address belongs to the object at ffff88802f4fc800
 which belongs to the cache sock_inode_cache of size 1408
The buggy address is located 128 bytes inside of
 freed 1408-byte region [ffff88802f4fc800, ffff88802f4fcd80)

The buggy address belongs to the physical page:
page:ffffea0000bd3e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2f4f8
head:ffffea0000bd3e00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000840 ffff888013b06b40 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Reclaimable, gfp_mask 0xd20d0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_RECLAIMABLE), pid 4956, tgid 4956 (sshd), ts 31423924727, free_ts 0
  set_page_owner include/linux/page_owner.h:31 [inline]
  post_alloc_hook+0x2d0/0x350 mm/page_alloc.c:1533
  prep_new_page mm/page_alloc.c:1540 [inline]
  get_page_from_freelist+0xa28/0x3780 mm/page_alloc.c:3311
  __alloc_pages+0x22f/0x2440 mm/page_alloc.c:4567
  __alloc_pages_node include/linux/gfp.h:238 [inline]
  alloc_pages_node include/linux/gfp.h:261 [inline]
  alloc_slab_page mm/slub.c:2190 [inline]
  allocate_slab mm/slub.c:2354 [inline]
  new_slab+0xcc/0x3a0 mm/slub.c:2407
  ___slab_alloc+0x4af/0x19a0 mm/slub.c:3540
  __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3625
  __slab_alloc_node mm/slub.c:3678 [inline]
  slab_alloc_node mm/slub.c:3850 [inline]
  kmem_cache_alloc_lru+0x379/0x6f0 mm/slub.c:3879
  alloc_inode_sb include/linux/fs.h:3019 [inline]
  sock_alloc_inode+0x25/0x1c0 net/socket.c:308
  alloc_inode+0x5d/0x220 fs/inode.c:260
  new_inode_pseudo+0x16/0x80 fs/inode.c:1005
  sock_alloc+0x40/0x270 net/socket.c:634
  __sock_create+0xbc/0x800 net/socket.c:1535
  sock_create net/socket.c:1622 [inline]
  __sys_socket_create net/socket.c:1659 [inline]
  __sys_socket+0x14c/0x260 net/socket.c:1706
  __do_sys_socket net/socket.c:1720 [inline]
  __se_sys_socket net/socket.c:1718 [inline]
  __x64_sys_socket+0x72/0xb0 net/socket.c:1718
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b
page_owner free stack trace missing

Memory state around the buggy address:
 ffff88802f4fc780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88802f4fc800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88802f4fc880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff88802f4fc900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88802f4fc980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 43815482370c ("net: sock_def_readable() and friends RCU conversion")
Reported-and-tested-by: syzbot+32b89eaa102b372ff76d@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240126165532.3396702-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: Ensure natural alignment of const ipv6 loopback and router addresses

[ Upstream commit 60365049ccbacd101654a66ddcb299abfabd4fc5 ]

On a parisc64 kernel I sometimes notice this kernel warning:
Kernel unaligned access to 0x40ff8814 at ndisc_send_skb+0xc0/0x4d8

The address 0x40ff8814 points to the in6addr_linklocal_allrouters
variable and the warning simply means that some ipv6 function tries to
read a 64-bit word directly from the not-64-bit aligned
in6addr_linklocal_allrouters variable.

Unaligned accesses are non-critical as the architecture or exception
handlers usually will fix it up at runtime. Nevertheless it may trigger
a performance penality for some architectures. For details read the
"unaligned-memory-access" kernel documentation.

The patch below ensures that the ipv6 loopback and router addresses will
always be naturally aligned. This prevents the unaligned accesses for
all architectures.

Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 034dfc5df99eb ("ipv6: export in6addr_loopback to modules")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/ZbNuFM1bFqoH-UoY@p100
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: qca8k: fix illegal usage of GPIO

[ Upstream commit c44fc98f0a8ffd94fa0bd291928e7e312ffc7ca4 ]

When working with GPIO, its direction must be set either when the GPIO is
requested by gpiod_get*() or later on by one of the gpiod_direction_*()
functions. Neither of this is done here which results in undefined
behavior on some systems.

As the reset GPIO is used right after it is requested here, it makes sense
to configure it as GPIOD_OUT_HIGH right away. With that, the following
gpiod_set_value_cansleep(1) becomes redundant and can be safely
removed.

Fixes: a653f2f538f9 ("net: dsa: qca8k: introduce reset via gpio feature")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1706266175-3408-1-git-send-email-michal.vokac@ysoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()

[ Upstream commit bbc404d20d1b46d89b461918bc44587620eda200 ]

All error handling paths, except this one, go to 'out' where
release_swfw_sync() is called.
This call balances the acquire_swfw_sync() call done at the beginning of
the function.

Branch to the error handling path in order to correctly release some
resources in case of error.

Fixes: ae14a1d8e104 ("ixgbe: Fix IOSF SB access issues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: Refactor overtemp event handling

[ Upstream commit 6c1b4af8c1b20c70dde01e58381685d6a4a1d2c8 ]

Currently ixgbe driver is notified of overheating events
via internal IXGBE_ERR_OVERTEMP error code.

Change the approach for handle_lasi() to use freshly introduced
is_overtemp function parameter which set when such event occurs.
Change check_overtemp() to bool and return true if overtemp
event occurs.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: Refactor returning internal error codes

[ Upstream commit 5795f533f30a80aa0473652876296ebc9129e33a ]

Change returning codes to the kernel ones instead of
the internal ones for the entire ixgbe driver.

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: bbc404d20d1b ("ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

e1000e: correct maximum frequency adjustment values

[ Upstream commit f1f6a6b1830a8f1dc92ee26fae76333f446b0663 ]

The e1000e driver supports hardware with a variety of different clock
speeds, and thus a variety of different increment values used for
programming its PTP hardware clock.

The values currently programmed in e1000e_ptp_init are incorrect. In
particular, only two maximum adjustments are used: 24000000 - 1, and
600000000 - 1. These were originally intended to be used with the 96 MHz
clock and the 25 MHz clock.

Both of these values are actually slightly too high. For the 96 MHz clock,
the actual maximum value that can safely be programmed is 23,999,938. For
the 25 MHz clock, the maximum value is 599,999,904.

Worse, several devices use a 24 MHz clock or a 38.4 MHz clock. These parts
are incorrectly assigned one of either the 24million or 600million values.
For the 24 MHz clock, this is not a significant issue: its current
increment value can support an adjustment up to 7billion in the positive
direction. However, the 38.4 KHz clock uses an increment value which can
only support up to 230,769,157 before it starts overflowing.

To understand where these values come from, consider that frequency
adjustments have the form of:

new_incval = base_incval + (base_incval * adjustment) / (unit of adjustment)

The maximum adjustment is reported in terms of parts per billion:
new_incval = base_incval + (base_incval * adjustment) / 1 billion

The largest possible adjustment is thus given by the following:
max_incval = base_incval + (base_incval * max_adj) / 1 billion

Re-arranging to solve for max_adj:
max_adj = (max_incval - base_incval) * 1 billion / base_incval

We also need to ensure that negative adjustments cannot underflow. This can
be achieved simply by ensuring max_adj is always less than 1 billion.

Introduce new macros in e1000.h codifying the maximum adjustment in PPB for
each frequency given its associated increment values. Also clarify where
these values come from by commenting about the above equations.

Replace the switch statement in e1000e_ptp_init with one which mirrors the
increment value switch statement from e1000e_get_base_timinica. For each
device, assign the appropriate maximum adjustment based on its frequency.
Some parts can have one of two frequency modes as determined by
E1000_TSYNCRXCTL_SYSCFI.

Since the new flow directly matches the assignments in
e1000e_get_base_timinca, and uses well defined macro names, it is much
easier to verify that the resulting maximum adjustments are correct. It
also avoids difficult to parse construction such as the "hw->mac.type <
e1000_phc_lpt", and the use of fallthrough which was especially confusing
when combined with a conditional block.

Note that I believe the current increment value configuration used for
24MHz clocks is sub-par, as it leaves at least 3 extra bits available in
the INCVALUE register. However, fixing that requires more careful review of
the clock rate and associated values.

Reported-by: Trey Harrison <harrisondigitalmedia@gmail.com>
Fixes: 68fe1d5da548 ("e1000e: Add Support for 38.4MHZ frequency")
Fixes: d89777bf0e42 ("e1000e: add support for IEEE-1588 PTP")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: add sanity checks to rx zerocopy

[ Upstream commit 577e4432f3ac810049cb7e6b71f4d96ec7c6e894 ]

TCP rx zerocopy intent is to map pages initially allocated
from NIC drivers, not pages owned by a fs.

This patch adds to can_map_frag() these additional checks:

- Page must not be a compound one.
- page->mapping must be NULL.

This fixes the panic reported by ZhangPeng.

syzbot was able to loopback packets built with sendfile(),
mapping pages owned by an ext4 file to TCP rx zerocopy.

r3 = socket$inet_tcp(0x2, 0x1, 0x0)
mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0)
r4 = socket$inet_tcp(0x2, 0x1, 0x0)
bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10)
connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10)
r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
    0x181e42, 0x0)
fallocate(r5, 0x0, 0x0, 0x85b8)
sendfile(r4, r5, 0x0, 0x8ba0)
getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23,
    &(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0,
    0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40)
r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
    0x181e42, 0x0)

Fixes: 93ab6cc69162 ("tcp: implement mmap() for zero copy receive")
Link: https://lore.kernel.org/netdev/5106a58e-04da-372a-b836-9d3d0bd2507b@huawei.com/T/
Reported-and-bisected-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-mm@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lan966x: Fix port configuration when using SGMII interface

[ Upstream commit 62b4248105353e7d1debd30ca5c57ec5e5f28e35 ]

In case the interface between the MAC and the PHY is SGMII, then the bit
GIGA_MODE on the MAC side needs to be set regardless of the speed at
which it is running.

Fixes: d28d6d2e37d1 ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmr: fix kernel panic when forwarding mcast packets

[ Upstream commit e622502c310f1069fd9f41cd38210553115f610a ]

The stacktrace was:
[   86.305548] BUG: kernel NULL pointer dereference, address: 0000000000000092
[   86.306815] #PF: supervisor read access in kernel mode
[   86.307717] #PF: error_code(0x0000) - not-present page
[   86.308624] PGD 0 P4D 0
[   86.309091] Oops: 0000 [#1] PREEMPT SMP NOPTI
[   86.309883] CPU: 2 PID: 3139 Comm: pimd Tainted: G     U             6.8.0-6wind-knet #1
[   86.311027] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014
[   86.312728] RIP: 0010:ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985)
[ 86.313399] Code: f9 1f 0f 87 85 03 00 00 48 8d 04 5b 48 8d 04 83 49 8d 44 c5 00 48 8b 40 70 48 39 c2 0f 84 d9 00 00 00 49 8b 46 58 48 83 e0 fe <80> b8 92 00 00 00 00 0f 84 55 ff ff ff 49 83 47 38 01 45 85 e4 0f
[   86.316565] RSP: 0018:ffffad21c0583ae0 EFLAGS: 00010246
[   86.317497] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   86.318596] RDX: ffff9559cb46c000 RSI: 0000000000000000 RDI: 0000000000000000
[   86.319627] RBP: ffffad21c0583b30 R08: 0000000000000000 R09: 0000000000000000
[   86.320650] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[   86.321672] R13: ffff9559c093a000 R14: ffff9559cc00b800 R15: ffff9559c09c1d80
[   86.322873] FS:  00007f85db661980(0000) GS:ffff955a79d00000(0000) knlGS:0000000000000000
[   86.324291] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   86.325314] CR2: 0000000000000092 CR3: 000000002f13a000 CR4: 0000000000350ef0
[   86.326589] Call Trace:
[   86.327036]  <TASK>
[   86.327434] ? show_regs (/build/work/knet/arch/x86/kernel/dumpstack.c:479)
[   86.328049] ? __die (/build/work/knet/arch/x86/kernel/dumpstack.c:421 /build/work/knet/arch/x86/kernel/dumpstack.c:434)
[   86.328508] ? page_fault_oops (/build/work/knet/arch/x86/mm/fault.c:707)
[   86.329107] ? do_user_addr_fault (/build/work/knet/arch/x86/mm/fault.c:1264)
[   86.329756] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223)
[   86.330350] ? __irq_work_queue_local (/build/work/knet/kernel/irq_work.c:111 (discriminator 1))
[   86.331013] ? exc_page_fault (/build/work/knet/./arch/x86/include/asm/paravirt.h:693 /build/work/knet/arch/x86/mm/fault.c:1515 /build/work/knet/arch/x86/mm/fault.c:1563)
[   86.331702] ? asm_exc_page_fault (/build/work/knet/./arch/x86/include/asm/idtentry.h:570)
[   86.332468] ? ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985)
[   86.333183] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223)
[   86.333920] ipmr_mfc_add (/build/work/knet/./include/linux/rcupdate.h:782 /build/work/knet/net/ipv4/ipmr.c:1009 /build/work/knet/net/ipv4/ipmr.c:1273)
[   86.334583] ? __pfx_ipmr_hash_cmp (/build/work/knet/net/ipv4/ipmr.c:363)
[   86.335357] ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470)
[   86.336135] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223)
[   86.336854] ? ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470)
[   86.337679] do_ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:944)
[   86.338408] ? __pfx_unix_stream_read_actor (/build/work/knet/net/unix/af_unix.c:2862)
[   86.339232] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223)
[   86.339809] ? aa_sk_perm (/build/work/knet/security/apparmor/include/cred.h:153 /build/work/knet/security/apparmor/net.c:181)
[   86.340342] ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:1415)
[   86.340859] raw_setsockopt (/build/work/knet/net/ipv4/raw.c:836)
[   86.341408] ? security_socket_setsockopt (/build/work/knet/security/security.c:4561 (discriminator 13))
[   86.342116] sock_common_setsockopt (/build/work/knet/net/core/sock.c:3716)
[   86.342747] do_sock_setsockopt (/build/work/knet/net/socket.c:2313)
[   86.343363] __sys_setsockopt (/build/work/knet/./include/linux/file.h:32 /build/work/knet/net/socket.c:2336)
[   86.344020] __x64_sys_setsockopt (/build/work/knet/net/socket.c:2340)
[   86.344766] do_syscall_64 (/build/work/knet/arch/x86/entry/common.c:52 /build/work/knet/arch/x86/entry/common.c:83)
[   86.345433] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223)
[   86.346161] ? syscall_exit_work (/build/work/knet/./include/linux/audit.h:357 /build/work/knet/kernel/entry/common.c:160)
[   86.346938] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223)
[   86.347657] ? syscall_exit_to_user_mode (/build/work/knet/kernel/entry/common.c:215)
[   86.348538] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223)
[   86.349262] ? do_syscall_64 (/build/work/knet/./arch/x86/include/asm/cpufeature.h:171 /build/work/knet/arch/x86/entry/common.c:98)
[   86.349971] entry_SYSCALL_64_after_hwframe (/build/work/knet/arch/x86/entry/entry_64.S:129)

The original packet in ipmr_cache_report() may be queued and then forwarded
with ip_mr_forward(). This last function has the assumption that the skb
dst is set.

After the below commit, the skb dst is dropped by ipv4_pktinfo_prepare(),
which causes the oops.

Fixes: bb7403655b3c ("ipmr: support IP_PKTINFO on cache report IGMP msg")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240125141847.1931933-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mt7530: fix 10M/100M speed on MT7988 switch

[ Upstream commit dfa988b4c7c3a48bde7c2713308920c7741fff29 ]

Setup PMCR port register for actual speed and duplex on internally
connected PHYs of the MT7988 built-in switch. This fixes links with
speeds other than 1000M.

Fixes: 110c18bfed41 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/a5b04dfa8256d8302f402545a51ac4c626fdba25.1706071272.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()

[ Upstream commit 8d975c15c0cd744000ca386247432d57b21f9df0 ]

syzbot found __ip6_tnl_rcv() could access unitiliazed data [1].

Call pskb_inet_may_pull() to fix this, and initialize ipv6h
variable after this call as it can change skb->head.

[1]
 BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
 BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
 BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321
  __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
  INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
  IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321
  ip6ip6_dscp_ecn_decapsulate+0x178/0x1b0 net/ipv6/ip6_tunnel.c:727
  __ip6_tnl_rcv+0xd4e/0x1590 net/ipv6/ip6_tunnel.c:845
  ip6_tnl_rcv+0xce/0x100 net/ipv6/ip6_tunnel.c:888
 gre_rcv+0x143f/0x1870
  ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438
  ip6_input_finish net/ipv6/ip6_input.c:483 [inline]
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492
  ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586
  dst_input include/net/dst.h:461 [inline]
  ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310
  __netif_receive_skb_one_core net/core/dev.c:5532 [inline]
  __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646
  netif_receive_skb_internal net/core/dev.c:5732 [inline]
  netif_receive_skb+0x58/0x660 net/core/dev.c:5791
  tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
  tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002
  tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
  call_write_iter include/linux/fs.h:2084 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0x786/0x1200 fs/read_write.c:590
  ksys_write+0x20f/0x4c0 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x93/0xd0 fs/read_write.c:652
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
  slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
  slab_alloc_node mm/slub.c:3478 [inline]
  kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
  __alloc_skb+0x318/0x740 net/core/skbuff.c:651
  alloc_skb include/linux/skbuff.h:1286 [inline]
  alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
  sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787
  tun_alloc_skb drivers/net/tun.c:1531 [inline]
  tun_get_user+0x1e8a/0x66d0 drivers/net/tun.c:1846
  tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
  call_write_iter include/linux/fs.h:2084 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0x786/0x1200 fs/read_write.c:590
  ksys_write+0x20f/0x4c0 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x93/0xd0 fs/read_write.c:652
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 0 PID: 5034 Comm: syz-executor331 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023

Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240125170557.2663942-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: give more time for GRO aggregation

[ Upstream commit 89abe628375301fedb68770644df845d49018d8b ]

The gro.sh test-case relay on the gro_flush_timeout to ensure
that all the segments belonging to any given batch are properly
aggregated.

The other end, the sender is a user-space program transmitting
each packet with a separate write syscall. A busy host and/or
stracing the sender program can make the relevant segments reach
the GRO engine after the flush timeout triggers.

Give the GRO flush timeout more slack, to avoid sporadic self-tests
failures.

Fixes: 9af771d2ec04 ("selftests/net: allow GRO coalesce test on veth")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/bffec2beab3a5672dd13ecabe4fad81d2155b367.1706206101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: add missing required classifier

[ Upstream commit d3cb3b0088ca92082e2bebc40cc6894a632173e2 ]

the udpgro_fraglist self-test uses the BPF classifiers, but the
current net self-test configuration does not include it, causing
CI failures:

 # selftests: net: udpgro_frglist.sh
 # ipv6
 # tcp - over veth touching data
 # -l 4 -6 -D 2001:db8::1 -t rx -4 -t
 # Error: TC classifier not found.
 # We have an error talking to the kernel
 # Error: TC classifier not found.
 # We have an error talking to the kernel

Add the missing knob.

Fixes: edae34a3ed92 ("selftests net: add UDP GRO fraglist + bpf self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/7c3643763b331e9a400e1874fe089193c99a1c3f.1706170897.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: add missing config for big tcp tests

[ Upstream commit fcf67d82b8b878bdd95145382be43927bce07ec6 ]

The big_tcp test-case requires a few kernel knobs currently
not specified in the net selftests config, causing the
following failure:

  # selftests: net: big_tcp.sh
  # Error: Failed to load TC action module.
  # We have an error talking to the kernel
...
  # Testing for BIG TCP:
  # CLI GSO | GW GRO | GW GSO | SER GRO
  # ./big_tcp.sh: line 107: test: !=: unary operator expected
...
  # on        on       on       on      : [FAIL_on_link1]

Add the missing configs

Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/all/21630ecea872fea13f071342ac64ef52a991a9b5.1706282943.git.pabeni@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: mediatek-ge-soc: sync driver with MediaTek SDK

[ Upstream commit ff63cc2e95065bea978d2db01f7e7356cca3d021 ]

Sync initialization and calibration routines with MediaTek's reference
driver. Improves compliance and resolves link stability issues with
CH340 IoT devices connected to MT798x built-in PHYs.

Fixes: 98c485eaf509 ("net: phy: add driver for MediaTek SoC built-in GE PHYs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/f2195279c234c0f618946424b8236026126bc595.1706071311.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: set DMA coherent mask to get PPE working

[ Upstream commit cae1f1c36661f28c92a1db9113961a9ebd61dbaa ]

Set DMA coherent mask to 32-bit which makes PPE offloading engine start
working on BPi-R4 which got 4 GiB of RAM.

Fixes: 2d75891ebc09 ("net: ethernet: mtk_eth_soc: support 36-bit DMA addressing on MT7988")
Suggested-by: Elad Yifee <eladwf@users.github.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/97e90925368b405f0974b9b15f1b7377c4a329ad.1706113251.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Fix skb truesize underestimation

[ Upstream commit 534326711000c318fe1523c77308450522baa499 ]

For a skb frag with a newly allocated copy page, the true size is
incorrectly set to packet buffer size. It should be set to PAGE_SIZE
instead.

Fixes: 82fd151d38d9 ("gve: Reduce alloc and copy costs in the GQ rx path")
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Link: https://lore.kernel.org/r/20240124161025.1819836-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: explicitly wait for listener ready

[ Upstream commit 4acffb66630a0e4800880baa61a54ef18047ccd3 ]

The UDP GRO forwarding test still hard-code an arbitrary pause
to wait for the UDP listener becoming ready in background.

That causes sporadic failures depending on the host load.

Replace the sleep with the existing helper waiting for the desired
port being exposed.

Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/4d58900fb09cef42749cfcf2ad7f4b91a97d225c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: remove dependency on ebpf tests

[ Upstream commit 98cb12eb52a780e682bea8372fdb2912c08132dd ]

Several net tests requires an XDP program build under the ebpf
directory, and error out if such program is not available.

That makes running successful net test hard, let's duplicate into the
net dir the [very small] program, re-using the existing rules to build
it, and finally dropping the bogus dependency.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/28e7af7c031557f691dc8045ee41dd549dd5e74c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4acffb66630a ("selftests: net: explicitly wait for listener ready")
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: hidraw: fix a problem of memory leak in hidraw_release()

[ Upstream commit a3bdcdd022c68942a774e8e63424cc11c85aab78 ]

'struct hidraw_list' is a circular queue whose head can be smaller than
tail. Using 'list->tail != list->head' to release all memory that should
be released.

Fixes: a5623a203cff ("HID: hidraw: fix memory leak in hidraw_release()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler

[ Upstream commit 4373534a9850627a2695317944898eb1283a2db0 ]

Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host
lock every time for deciding if error handler kthread needs to be waken up.

This can be too heavy in case of recovery, such as:

 - N hardware queues

 - queue depth is M for each hardware queue

 - each scsi_host_busy() iterates over (N * M) tag/requests

If recovery is triggered in case that all requests are in-flight, each
scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called
for the last in-flight request, scsi_host_busy() has been run for (N * M -
1) times, and request has been iterated for (N*M - 1) * (N * M) times.

If both N and M are big enough, hard lockup can be triggered on acquiring
host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169).

Fix the issue by calling scsi_host_busy() outside the host lock. We don't
need the host lock for getting busy count because host the lock never
covers that.

[mkp: Drop unnecessary 'busy' variables pointed out by Bart]

Cc: Ewan Milne <emilne@redhat.com>
Fixes: 6eb045e092ef ("scsi: core: avoid host-wide host_busy counter for scsi_mq")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240112070000.4161982-1-ming.lei@redhat.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com>
Tested-by: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: ti-abb: don't use devm_platform_ioremap_resource_byname for shared interrupt register

[ Upstream commit a67e1f0bd4564b485e0f0c3ed7f6bf17688be268 ]

We can't use devm_platform_ioremap_resource_byname() to remap the
interrupt register that can be shared between
regulator-abb-{ivahd,dspeve,gpu} drivers instances.

The combined helper introduce a call to devm_request_mem_region() that
creates a new busy resource region on PRM_IRQSTATUS_MPU register
(0x4ae06010). The first devm_request_mem_region() call succeeds for
regulator-abb-ivahd but fails for the two other regulator-abb-dspeve
and regulator-abb-gpu.

  # cat /proc/iomem | grep -i 4ae06
  4ae06010-4ae06013 : 4ae07e34.regulator-abb-ivahd int-address
  4ae06014-4ae06017 : 4ae07ddc.regulator-abb-mpu int-address

regulator-abb-dspeve and regulator-abb-gpu are missing due to
devm_request_mem_region() failure (EBUSY):

  [    1.326660] ti_abb 4ae07e30.regulator-abb-dspeve: can't request region for resource [mem 0x4ae06010-0x4ae06013]
  [    1.326660] ti_abb: probe of 4ae07e30.regulator-abb-dspeve failed with error -16
  [    1.327239] ti_abb 4ae07de4.regulator-abb-gpu: can't request region for resource [mem 0x4ae06010-0x4ae06013]
  [    1.327270] ti_abb: probe of 4ae07de4.regulator-abb-gpu failed with error -16

>From arm/boot/dts/dra7.dtsi:

The abb_mpu is the only instance using its own interrupt register:
  (0x4ae06014) PRM_IRQSTATUS_MPU_2, ABB_MPU_DONE_ST (bit 7)

The other tree instances (abb_ivahd, abb_dspeve, abb_gpu) share
PRM_IRQSTATUS_MPU register (0x4ae06010) but use different bits
ABB_IVA_DONE_ST (bit 30), ABB_DSPEVE_DONE_ST( bit 29) and
ABB_GPU_DONE_ST (but 28).

The commit b36c6b1887ff ("regulator: ti-abb: Make use of the helper
function devm_ioremap related") overlooked the following comment
implicitly explaining why devm_ioremap() is used in this case:

  /*
   * We may have shared interrupt register offsets which are
   * write-1-to-clear between domains ensuring exclusivity.
   */

Fixes and partially reverts commit b36c6b1887ff ("regulator: ti-abb:
Make use of the helper function devm_ioremap related").

Improve the existing comment to avoid further conversion to
devm_platform_ioremap_resource_byname().

Fixes: b36c6b1887ff ("regulator: ti-abb: Make use of the helper function devm_ioremap related")
Signed-off-by: Romain Naour <romain.naour@skf.com>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Link: https://msgid.link/r/20240123111456.739381-1-romain.naour@smile.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: run test suites only after module initialization completes

[ Upstream commit a1af6a2bfa0cb46d70b7df5352993e750da6c79b ]

Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in
kunit_free_suite_set()") fixed a wild-memory-access bug that could have
happened during the loading phase of test suites built and executed as
loadable modules. However, it also introduced a problematic side effect
that causes test suites modules to crash when they attempt to register
fake devices.

When a module is loaded, it traverses the MODULE_STATE_UNFORMED and
MODULE_STATE_COMING states before reaching the normal operating state
MODULE_STATE_LIVE. Finally, when the module is removed, it moves to
MODULE_STATE_GOING before being released. However, if the loading
function load_module() fails between complete_formation() and
do_init_module(), the module goes directly from MODULE_STATE_COMING to
MODULE_STATE_GOING without passing through MODULE_STATE_LIVE.

This behavior was causing kunit_module_exit() to be called without
having first executed kunit_module_init(). Since kunit_module_exit() is
responsible for freeing the memory allocated by kunit_module_init()
through kunit_filter_suites(), this behavior was resulting in a
wild-memory-access bug.

Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in
kunit_free_suite_set()") fixed this issue by running the tests when the
module is still in MODULE_STATE_COMING. However, modules in that state
are not fully initialized, lacking sysfs kobjects. Therefore, if a test
module attempts to register a fake device, it will inevitably crash.

This patch proposes a different approach to fix the original
wild-memory-access bug while restoring the normal module execution flow
by making kunit_module_exit() able to detect if kunit_module_init() has
previously initialized the tests suite set. In this way, test modules
can once again register fake devices without crashing.

This behavior is achieved by checking whether mod->kunit_suites is a
virtual or direct mapping address. If it is a virtual address, then
kunit_module_init() has allocated the suite_set in kunit_filter_suites()
using kmalloc_array(). On the contrary, if mod->kunit_suites is still
pointing to the original address that was set when looking up the
.kunit_test_suites section of the module, then the loading phase has
failed and there's no memory to be freed.

v4:
- rebased on 6.8
- noted that kunit_filter_suites() must return a virtual address
v3:
- add a comment to clarify why the start address is checked
v2:
- add include <linux/mm.h>

Fixes: 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()")
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Rae Moar <rmoar@google.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: isci: Fix an error code problem in isci_io_request_build()

[ Upstream commit 658365c6b0857e6a306436e315a8633937e3af42 ]

Clang static complains that Value stored to 'status' is never read. Return
'status' rather than 'SCI_SUCCESS'.

Fixes: f1f52e75939b ("isci: uplevel request infrastructure")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20240112041926.3924315-1-suhui@nfschina.com
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Fix build error on rv32 + XIP

[ Upstream commit 66f962d8939fd2ac74de901d30d30310c8ddca79 ]

commit 66f1e6809397 ("riscv: Make XIP bootable again") restricted page
offset to the sv39 page offset instead of the default sv57, which makes
sense since probably the platforms that target XIP kernels do not
support anything else than sv39 and we do not try to find out the
largest address space supported on XIP kernels (ie set_satp_mode()).

But PAGE_OFFSET_L3 is not defined for rv32, so fix the build error by
restoring the previous behaviour which picks CONFIG_PAGE_OFFSET for rv32.

Fixes: 66f1e6809397 ("riscv: Make XIP bootable again")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/linux-riscv/344dca85-5c48-44e1-bc64-4fa7973edd12@infradead.org/T/#u
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20240118212120.2087803-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: only flush mes process context if mes support is there

[ Upstream commit 24149412dfc71f7f4a54868702e9145e396263d3 ]

Fix up on mes process context flush to prevent non-mes devices from
spamming error messages or running into undefined behaviour during
process termination.

Fixes: bd33bb1409b4 ("drm/amdkfd: fix mes set shader debugger process management")
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: using mul_u32_u32() requires linux/math64.h

[ Upstream commit 933a2a376fb3f22ba4774f74233571504ac56b02 ]

Some pending include file cleanups produced this error:

In file included from include/linux/kernel.h:27,
                 from drivers/gpu/ipu-v3/ipu-dp.c:7:
include/drm/drm_color_mgmt.h: In function 'drm_color_lut_extract':
include/drm/drm_color_mgmt.h:45:46: error: implicit declaration of function 'mul_u32_u32' [-Werror=implicit-function-declaration]
   45 |                 return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(user_input, (1 << bit_precision) - 1),
      |                                              ^~~~~~~~~~~

Fixes: c6fbb6bca108 ("drm: Fix color LUT rounding")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219145734.13e40e1e@canb.auug.org.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: fix RCU dereference in __cfg80211_bss_update

[ Upstream commit 1184950e341c11b6f82bc5b59564411d9537ab27 ]

Replace rcu_dereference() with rcu_access_pointer() since we hold
the lock here (and aren't in an RCU critical section).

Fixes: 32af9a9e1069 ("wifi: cfg80211: free beacon_ies when overridden from hidden BSS")
Reported-and-tested-by: syzbot+864a269c27ee06b58374@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://msgid.link/tencent_BF8F0DF0258C8DBF124CDDE4DD8D992DCF07@qq.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: Fix the nr_addr_filters fix

[ Upstream commit 388a1fb7da6aaa1970c7e2a7d7fcd983a87a8484 ]

Thomas reported that commit 652ffc2104ec ("perf/core: Fix narrow
startup race when creating the perf nr_addr_filters sysfs file") made
the entire attribute group vanish, instead of only the nr_addr_filters
attribute.

Additionally a stray return.

Insufficient coffee was involved with both writing and merging the
patch.

Fixes: 652ffc2104ec ("perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file")
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lkml.kernel.org/r/20231122100756.GP8262@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126

[ Upstream commit 92a85b7c6262f19c65a1c115cf15f411ba65a57c ]

Rockchip RV1126 is using old style i2c controller, the i2c2
bus uses a non-sequential offset in the grf register for the
mask/value bits for this bus.

This patch fixes i2c2 bus on rv1126 SoCs.

Signed-off-by: Tim Lunn <tim@feathertop.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix 'node' NULL check in 'svm_range_get_range_boundaries()'

[ Upstream commit d7a254fad873775ce6c32b77796c81e81e6b7f2e ]

Range interval [start, last] is ordered by rb_tree, rb_prev, rb_next
return value still needs NULL check, thus modified from "node" to "rb_node".

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2691 svm_range_get_range_boundaries() warn: can 'node' even be NULL?

Suggested-by: Philip Yang <Philip.Yang@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Release 'adev->pm.fw' before return in 'amdgpu_device_need_post()'

[ Upstream commit 8a44fdd3cf91debbd09b43bd2519ad2b2486ccf4 ]

In function 'amdgpu_device_need_post(struct amdgpu_device *adev)' -
'adev->pm.fw' may not be released before return.

Using the function release_firmware() to release adev->pm.fw.

Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1571 amdgpu_device_need_post() warn: 'adev->pm.fw' from request_firmware() not released on lines: 1554.

Cc: Monk Liu <Monk.Liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix with right return code '-EIO' in 'amdgpu_gmc_vram_checking()'

[ Upstream commit fac4ebd79fed60e79cccafdad45a2bb8d3795044 ]

The amdgpu_gmc_vram_checking() function in emulation checks whether
all of the memory range of shared system memory could be accessed by
GPU, from this aspect, -EIO is returned for error scenarios.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c:919 gmc_v6_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:1103 gmc_v7_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:1223 gmc_v8_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:2344 gmc_v9_0_hw_init() warn: missing error code? 'r'

Cc: Xiaojian Du <Xiaojian.Du@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/powerplay: Fix kzalloc parameter 'ATOM_Tonga_PPM_Table' in 'get_platform_power_management_table()'

[ Upstream commit 6616b5e1999146b1304abe78232af810080c67e3 ]

In 'struct phm_ppm_table *ptr' allocation using kzalloc, an incorrect
structure type is passed to sizeof() in kzalloc, larger structure types
were used, thus using correct type 'struct phm_ppm_table' fixes the
below:

drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/process_pptables_v1_0.c:203 get_platform_power_management_table() warn: struct type mismatch 'phm_ppm_table vs _ATOM_Tonga_PPM_Table'

Cc: Eric Huang <JinHuiEric.Huang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix avg vs input power reporting on smu7

[ Upstream commit 25852d4b97572ff62ffee574cb8bb4bc551af23a ]

Hawaii, Bonaire, Fiji, and Tonga support average power, the others
support current power.

Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix invalid pointer access if get_quota_realm return ERR_PTR

[ Upstream commit 0f4cf64eabc6e16cfc2704f1960e82dc79d91c8d ]

This issue is reported by smatch that get_quota_realm() might return
ERR_PTR but we did not handle it. It's not a immediate bug, while we
still should address it to avoid potential bugs if get_quota_realm()
is changed to return other ERR_PTR in future.

Set ceph_snap_realm's pointer in get_quota_realm()'s to address this
issue, the pointer would be set to NULL if get_quota_realm() failed
to get struct ceph_snap_realm, so no ERR_PTR would happen any more.

[ xiubli: minor code style clean up ]

Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix deadlock or deadcode of misusing dget()

[ Upstream commit b493ad718b1f0357394d2cdecbf00a44a36fa085 ]

The lock order is incorrect between denty and its parent, we should
always make sure that the parent get the lock first.

But since this deadcode is never used and the parent dir will always
be set from the callers, let's just remove it.

Link: https://lore.kernel.org/r/20231116081919.GZ1957730@ZenIV
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: reinitialize mds feature bit even when session in open

[ Upstream commit f48e0342a74d7770cdf1d11894bdc3b6d989b29e ]

Following along the same lines as per the user-space fix. Right
now this isn't really an issue with the ceph kernel driver because
of the feature bit laginess, however, that can change over time
(when the new snaprealm info type is ported to the kernel driver)
and depending on the MDS version that's being upgraded can cause
message decoding issues - so, fix that early on.

Link: http://tracker.ceph.com/issues/63188
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: fix IO hang from sbitmap wakeup race

[ Upstream commit 5266caaf5660529e3da53004b8b7174cab6374ed ]

In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered
with the following blk_mq_get_driver_tag() in case of getting driver
tag failure.

Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe
the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime
blk_mq_mark_tag_wait() can't get driver tag successfully.

This issue can be reproduced by running the following test in loop, and
fio hang can be observed in < 30min when running it on my test VM
in laptop.

modprobe -r scsi_debug
modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4
dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename`
fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \
        --runtime=100 --numjobs=40 --time_based --name=test \
         --ioengine=libaio

Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which
is just fine in case of running out of tag.

Cc: Jan Kara <jack@suse.cz>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Reported-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240112122626.4181044-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings

[ Upstream commit e3fe8d28c67bf6c291e920c6d04fa22afa14e6e4 ]

Fix the warnings when building virtio_net driver.

"
drivers/net/virtio_net.c: In function ‘init_vqs’:
drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=]
 4551 |                 sprintf(vi->rq[i].name, "input.%d", i);
      |                                                ^~
In function ‘virtnet_find_vqs’,
    inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-2147483643, 65534]
 4551 |                 sprintf(vi->rq[i].name, "input.%d", i);
      |                                         ^~~~~~~~~~
drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16
 4551 |                 sprintf(vi->rq[i].name, "input.%d", i);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/virtio_net.c: In function ‘init_vqs’:
drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=]
 4552 |                 sprintf(vi->sq[i].name, "output.%d", i);
      |                                                 ^~
In function ‘virtnet_find_vqs’,
    inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-2147483643, 65534]
 4552 |                 sprintf(vi->sq[i].name, "output.%d", i);
      |                                         ^~~~~~~~~~~
drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16
 4552 |                 sprintf(vi->sq[i].name, "output.%d", i);

"

Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20240104020902.2753599-1-yanjun.zhu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix lock dependency warning with srcu

[ Upstream commit 2a9de42e8d3c82c6990d226198602be44f43f340 ]

======================================================
WARNING: possible circular locking dependency detected
6.5.0-kfd-yangp #2289 Not tainted
------------------------------------------------------
kworker/0:2/996 is trying to acquire lock:
        (srcu){.+.+}-{0:0}, at: __synchronize_srcu+0x5/0x1a0

but task is already holding lock:
        ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}, at:
process_one_work+0x211/0x560

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}:
        __flush_work+0x88/0x4f0
        svm_range_list_lock_and_flush_work+0x3d/0x110 [amdgpu]
        svm_range_set_attr+0xd6/0x14c0 [amdgpu]
        kfd_ioctl+0x1d1/0x630 [amdgpu]
        __x64_sys_ioctl+0x88/0xc0

-> #2 (&info->lock#2){+.+.}-{3:3}:
        __mutex_lock+0x99/0xc70
        amdgpu_amdkfd_gpuvm_restore_process_bos+0x54/0x740 [amdgpu]
        restore_process_helper+0x22/0x80 [amdgpu]
        restore_process_worker+0x2d/0xa0 [amdgpu]
        process_one_work+0x29b/0x560
        worker_thread+0x3d/0x3d0

-> #1 ((work_completion)(&(&process->restore_work)->work)){+.+.}-{0:0}:
        __flush_work+0x88/0x4f0
        __cancel_work_timer+0x12c/0x1c0
        kfd_process_notifier_release_internal+0x37/0x1f0 [amdgpu]
        __mmu_notifier_release+0xad/0x240
        exit_mmap+0x6a/0x3a0
        mmput+0x6a/0x120
        do_exit+0x322/0xb90
        do_group_exit+0x37/0xa0
        __x64_sys_exit_group+0x18/0x20
        do_syscall_64+0x38/0x80

-> #0 (srcu){.+.+}-{0:0}:
        __lock_acquire+0x1521/0x2510
        lock_sync+0x5f/0x90
        __synchronize_srcu+0x4f/0x1a0
        __mmu_notifier_release+0x128/0x240
        exit_mmap+0x6a/0x3a0
        mmput+0x6a/0x120
        svm_range_deferred_list_work+0x19f/0x350 [amdgpu]
        process_one_work+0x29b/0x560
        worker_thread+0x3d/0x3d0

other info that might help us debug this:
Chain exists of:
  srcu --> &info->lock#2 --> (work_completion)(&svms->deferred_list_work)

Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
        lock((work_completion)(&svms->deferred_list_work));
                        lock(&info->lock#2);
lock((work_completion)(&svms->deferred_list_work));
        sync(srcu);

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix lock dependency warning

[ Upstream commit 47bf0f83fc86df1bf42b385a91aadb910137c5c9 ]

======================================================
WARNING: possible circular locking dependency detected
6.5.0-kfd-fkuehlin #276 Not tainted
------------------------------------------------------
kworker/8:2/2676 is trying to acquire lock:
ffff9435aae95c88 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}, at: __flush_work+0x52/0x550

but task is already holding lock:
ffff9435cd8e1720 (&svms->lock){+.+.}-{3:3}, at: svm_range_deferred_list_work+0xe8/0x340 [amdgpu]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&svms->lock){+.+.}-{3:3}:
       __mutex_lock+0x97/0xd30
       kfd_ioctl_alloc_memory_of_gpu+0x6d/0x3c0 [amdgpu]
       kfd_ioctl+0x1b2/0x5d0 [amdgpu]
       __x64_sys_ioctl+0x86/0xc0
       do_syscall_64+0x39/0x80
       entry_SYSCALL_64_after_hwframe+0x63/0xcd

-> #1 (&mm->mmap_lock){++++}-{3:3}:
       down_read+0x42/0x160
       svm_range_evict_svm_bo_worker+0x8b/0x340 [amdgpu]
       process_one_work+0x27a/0x540
       worker_thread+0x53/0x3e0
       kthread+0xeb/0x120
       ret_from_fork+0x31/0x50
       ret_from_fork_asm+0x11/0x20

-> #0 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}:
       __lock_acquire+0x1426/0x2200
       lock_acquire+0xc1/0x2b0
       __flush_work+0x80/0x550
       __cancel_work_timer+0x109/0x190
       svm_range_bo_release+0xdc/0x1c0 [amdgpu]
       svm_range_free+0x175/0x180 [amdgpu]
       svm_range_deferred_list_work+0x15d/0x340 [amdgpu]
       process_one_work+0x27a/0x540
       worker_thread+0x53/0x3e0
       kthread+0xeb/0x120
       ret_from_fork+0x31/0x50
       ret_from_fork_asm+0x11/0x20

other info that might help us debug this:

Chain exists of:
  (work_completion)(&svm_bo->eviction_work) --> &mm->mmap_lock --> &svms->lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&svms->lock);
                               lock(&mm->mmap_lock);
                               lock(&svms->lock);
  lock((work_completion)(&svm_bo->eviction_work));

I believe this cannot really lead to a deadlock in practice, because
svm_range_evict_svm_bo_worker only takes the mmap_read_lock if the BO
refcount is non-0. That means it's impossible that svm_range_bo_release
is running concurrently. However, there is no good way to annotate this.

To avoid the problem, take a BO reference in
svm_range_schedule_evict_svm_bo instead of in the worker. That way it's
impossible for a BO to get freed while eviction work is pending and the
cancel_work_sync call in svm_range_bo_release can be eliminated.

v2: Use svm_bo_ref_unless_zero and explained why that's safe. Also
removed redundant checks that are already done in
amdkfd_fence_enable_signaling.

Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libsubcmd: Fix memory leak in uniq()

[ Upstream commit ad30469a841b50dbb541df4d6971d891f703c297 ]

uniq() will write one command name over another causing the overwritten
string to be leaked. Fix by doing a pass that removes duplicates and a
second that removes the holes.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chenyuan Mi <cymi20@fudan.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231208000515.1693746-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback

[ Upstream commit b1b9f7a494400c0c39f8cd83de3aaa6111c55087 ]

The lis3lv02d_i2c driver was missing a line to set the lis3_dev's
reg_ctrl callback.

lis3_reg_ctrl(on) is called from the init callback, but due to
the missing reg_ctrl callback the regulators where never turned off
again leading to the following oops/backtrace when detaching the driver:

[   82.313527] ------------[ cut here ]------------
[   82.313546] WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put+0x219/0x230
...
[   82.313695] RIP: 0010:_regulator_put+0x219/0x230
...
[   82.314767] Call Trace:
[   82.314770]  <TASK>
[   82.314772]  ? _regulator_put+0x219/0x230
[   82.314777]  ? __warn+0x81/0x170
[   82.314784]  ? _regulator_put+0x219/0x230
[   82.314791]  ? report_bug+0x18d/0x1c0
[   82.314801]  ? handle_bug+0x3c/0x80
[   82.314806]  ? exc_invalid_op+0x13/0x60
[   82.314812]  ? asm_exc_invalid_op+0x16/0x20
[   82.314845]  ? _regulator_put+0x219/0x230
[   82.314857]  regulator_bulk_free+0x39/0x60
[   82.314865]  i2c_device_remove+0x22/0xb0

Add the missing setting of the callback so that the regulators
properly get turned off again when not used.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231224183402.95640-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: xhci-plat: fix usb disconnect issue after s4

[ Upstream commit 6d6887c42e946f43bed2e64571a40c8476a1e4a9 ]

The xhci retaining bogus hardware states cause usb disconnect devices
connected before hibernation(s4) and refer to the commit 'f3d478858be
("usb: ohci-platform: fix usb disconnect issue after s4")' which set
flag "hibernated" as true when resume-from-hibernation and that the
drivers will reset the hardware to get rid of any existing state and
make sure resume from hibernation re-enumerates everything for xhci.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20231228071113.1719-1-zhuyinbo@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p: Fix initialisation of netfs_inode for 9p

[ Upstream commit 9546ac78b232bac56ff975072b1965e0e755ebd4 ]

The 9p filesystem is calling netfs_inode_init() in v9fs_init_inode() -
before the struct inode fields have been initialised from the obtained file
stats (ie. after v9fs_stat2inode*() has been called), but netfslib wants to
set a couple of its fields from i_size.

Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Dominique Martinet <asmadeus@codewreck.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/AER: Decode Requester ID when no error info found

[ Upstream commit 1291b716bbf969e101d517bfb8ba18d958f758b8 ]

When a device with AER detects an error, it logs error information in its
own AER Error Status registers.  It may send an Error Message to the Root
Port (RCEC in the case of an RCiEP), which logs the fact that an Error
Message was received (Root Error Status) and the Requester ID of the
message source (Error Source Identification).

aer_print_port_info() prints the Requester ID from the Root Port Error
Source in the usual Linux "bb:dd.f" format, but when find_source_device()
finds no error details in the hierarchy below the Root Port, it printed the
raw Requester ID without decoding it.

Decode the Requester ID in the usual Linux format so it matches other
messages.

Sample message changes:

  - pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5
  - pcieport 0000:00:1c.5: AER: can't find device of ID00e5
  + pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
  + pcieport 0000:00:1c.5: AER: found no error details for 0000:00:1c.5

Link: https://lore.kernel.org/r/20231206224231.732765-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Fix 64GT/s effective data rate calculation

[ Upstream commit ac4f1897fa5433a1b07a625503a91b6aa9d7e643 ]

Unlike the lower rates, the PCIe 64GT/s Data Rate uses 1b/1b encoding, not
128b/130b (PCIe r6.1 sec 1.2, Table 1-1).  Correct the PCIE_SPEED2MBS_ENC()
calculation to reflect that.

Link: https://lore.kernel.org/r/20240102172701.65501-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spmi: mediatek: Fix UAF on device remove

[ Upstream commit e821d50ab5b956ed0effa49faaf29912fd4106d9 ]

The pmif driver data that contains the clocks is allocated along with
spmi_controller.
On device remove, spmi_controller will be freed first, and then devres
, including the clocks, will be cleanup.
This leads to UAF because putting the clocks will access the clocks in
the pmif driver data, which is already freed along with spmi_controller.

This can be reproduced by enabling DEBUG_TEST_DRIVER_REMOVE and
building the kernel with KASAN.

Fix the UAF issue by using unmanaged clk_bulk_get() and putting the
clocks before freeing spmi_controller.

Reported-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Yu-Che Cheng <giver@chromium.org>
Link: https://lore.kernel.org/r/20230717173934.1.If004a6e055a189c7f2d0724fa814422c26789839@changeid
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231206231733.4031901-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/kernfs/dir: obey S_ISGID

[ Upstream commit 5133bee62f0ea5d4c316d503cc0040cac5637601 ]

Handling of S_ISGID is usually done by inode_init_owner() in all other
filesystems, but kernfs doesn't use that function.  In kernfs, struct
kernfs_node is the primary data structure, and struct inode is only
created from it on demand.  Therefore, inode_init_owner() can't be
used and we need to imitate its behavior.

S_ISGID support is useful for the cgroup filesystem; it allows
subtrees managed by an unprivileged process to retain a certain owner
gid, which then enables sharing access to the subtree with another
unprivileged process.

--
v1 -> v2: minor coding style fix (comment)

Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231208093310.297233-2-max.kellermann@ionos.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE

[ Upstream commit e0f25b8992345aa5f113da2815f5add98738c611 ]

The capability CAP_CHECKPOINT_RESTORE was introduced to allow non-root
users to checkpoint and restore processes as non-root with CRIU.

This change extends CAP_CHECKPOINT_RESTORE to enable the CRIU option
'--shell-job' as non-root. CRIU's man-page describes the '--shell-job'
option like this:

  Allow one to dump shell jobs. This implies the restored task will
  inherit session and process group ID from the criu itself. This option
  also allows to migrate a single external tty connection, to migrate
  applications like top.

TIOCSLCKTRMIOS can only be done if the process has CAP_SYS_ADMIN and
this change extends it to CAP_SYS_ADMIN or CAP_CHECKPOINT_RESTORE.

With this change it is possible to checkpoint and restore processes
which have a tty connection as non-root if CAP_CHECKPOINT_RESTORE is
set.

Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Adrian Reber <areber@redhat.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20231208143656.1019-1-areber@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/sgx: Fix linker script asserts

[ Upstream commit 9fd552ee32c6c1e27c125016b87d295bea6faea7 ]

DEFINED only considers symbols, not section names. Hence, replace the
check for .got.plt with the _GLOBAL_OFFSET_TABLE_ symbol and remove other
(non-essential) asserts.

Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20231005153854.25566-10-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub

[ Upstream commit 855d75cf8311fee156fabb5639bb53757ca83dd4 ]

There is a potential delay in notifying Linux USB drivers of downstream
USB bus activity when connecting a high-speed or superSpeed device via the
Microchip USB491x hub. This delay is due to the fixed bInterval value of
12 in the silicon of the Microchip USB491x hub.

Microchip requested to ignore the device descriptor and decrease that
value to 9 as it was too late to modify that in silicon.

This patch speeds up the USB enummeration process that helps to pass
Apple Carplay certifications and improve the User experience when utilizing
the USB device via Microchip Multihost USB491x Hub.

A new hub quirk HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL speeds up
the notification process for Microchip USB491x hub by limiting
the maximum bInterval value to 9.

Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231205181829.127353-2-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: hub: Replace hardcoded quirk value with BIT() macro

[ Upstream commit 6666ea93d2c422ebeb8039d11e642552da682070 ]

This patch replaces the hardcoded quirk value in the macro with
BIT().

Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231205181829.127353-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: fix possible name leak in extcon_dev_register()

[ Upstream commit e66523c72c9aae0ff0dae6859eb77b04de1e8e5f ]

In the error path after calling dev_set_name(), the device
name is leaked. To fix this, moving dev_set_name() after the
error path and before device_register.

Link: https://lore.kernel.org/lkml/TYZPR01MB4784ADCD3E951E0863F3DB72D5B8A@TYZPR01MB4784.apcprd01.prod.exchangelabs.com/
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf cs-etm: Bump minimum OpenCSD version to ensure a bugfix is present

[ Upstream commit 2dbba30fd69b604802a9535b74bddb5bcca23793 ]

Since commit d927ef5004ef ("perf cs-etm: Add exception level consistency
check"), the exception that was added to Perf will be triggered unless
the following bugfix from OpenCSD is present:

 - _Version 1.2.1_:
  - __Bugfix__:
    ETM4x / ETE - output of context elements to client can in some
    circumstances be delayed until after subsequent atoms have been
    processed leading to incorrect memory decode access via the client
    callbacks. Fixed to flush context elements immediately they are
    committed.

Rather than remove the assert and silently fail, just increase the
minimum version requirement to avoid hard to debug issues and
regressions.

Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230901133716.677499-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: switchtec: Fix stdev_release() crash after surprise hot remove

[ Upstream commit df25461119d987b8c81d232cfe4411e91dcabe66 ]

A PCI device hot removal may occur while stdev->cdev is held open. The call
to stdev_release() then happens during close or exit, at a point way past
switchtec_pci_remove(). Otherwise the last ref would vanish with the
trailing put_device(), just before return.

At that later point in time, the devm cleanup has already removed the
stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted
one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause
a fatal page fault, and the subsequent dma_free_coherent(), if reached,
would pass a stale &stdev->pdev->dev pointer.

Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after
stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent
future accidents.

Reproducible via the script at
https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com

Link: https://lore.kernel.org/r/20231122042316.91208-2-dns@arista.com
Signed-off-by: Daniel Stodden <dns@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Only override AMD USB controller if required

[ Upstream commit e585a37e5061f6d5060517aed1ca4ccb2e56a34c ]

By running a Van Gogh device (Steam Deck), the following message
was noticed in the kernel log:

  pci 0000:04:00.3: PCI class overridden (0x0c03fe -> 0x0c03fe) so dwc3 driver can claim this instead of xhci

Effectively this means the quirk executed but changed nothing, since the
class of this device was already the proper one (likely adjusted by newer
firmware versions).

Check and perform the override only if necessary.

Link: https://lore.kernel.org/r/20231120160531.361552-1-gpiccoli@igalia.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Vicki Pfau <vi@endrift.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: arm_mhuv2: Fix a bug for mhuv2_sender_interrupt

[ Upstream commit ee01c0b4384d19ecc5dfa7db3fd4303f965c3eba ]

Message Handling Unit version is v2.1.

When arm_mhuv2 working with the data protocol transfer mode.
We have split one mhu into two channels, and every channel
include four channel windows, the two channels share
one gic spi interrupt.

There is a problem with the sending scenario.

The first channel will take up 0-3 channel windows, and the second
channel take up 4-7 channel windows. When the first channel send the
data, and the receiver will clear all the four channels status.
Although we only enabled the interrupt on the last channel window with
register CH_INT_EN,the register CHCOMB_INT_ST0 will be 0xf, not be 0x8.
Currently we just clear the last channel windows int status with the
data proctol mode.So after that,the CHCOMB_INT_ST0 status will be 0x7,
not be the 0x0.

Then the second channel send the data, the receiver read the
data, clear all the four channel windows status, trigger the sender
interrupt. But currently the CHCOMB_INT_ST0 register will be 0xf7,
get_irq_chan_comb function will always return the first channel.

So this patch clear all channel windows int status to avoid this interrupt
confusion.

Signed-off-by: Xiaowu.ding <xiaowu.ding@jaguarmicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: ti_am335x_tscadc: Fix TI SoC dependencies

[ Upstream commit 284d16c456e5d4b143f375b8ccc4038ab3f4ee0f ]

The ti_am335x_tscadc is specific to some TI SoCs, update
the dependencies for those SoCs and compile testing.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220155643.445849-1-pbrobinson@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/gntdev: Fix the abuse of underlying struct page in DMA-buf import

[ Upstream commit 2d2db7d40254d5fb53b11ebd703cd1ed0c5de7a1 ]

DO NOT access the underlying struct page of an sg table exported
by DMA-buf in dmabuf_imp_to_refs(), this is not allowed.
Please see drivers/dma-buf/dma-buf.c:mangle_sg_table() for details.

Fortunately, here (for special Xen device) we can avoid using
pages and calculate gfns directly from dma addresses provided by
the sg table.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://lore.kernel.org/r/20240107103426.2038075-1-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Make XIP bootable again

[ Upstream commit 66f1e68093979816a23412a3fad066f5bcbc0360 ]

Currently, the XIP kernel seems to fail to boot due to missing
XIP_FIXUP and a wrong page_offset value. A superfluous XIP_FIXUP
has also been removed.

Signed-off-by: Frederik Haxel <haxel@fzi.de>
Link: https://lore.kernel.org/r/20231212130116.848530-2-haxel@fzi.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i3c: master: cdns: Update maximum prescaler value for i2c clock

[ Upstream commit 374c13f9080a1b9835a5ed3e7bea93cf8e2dc262 ]

As per the Cadence IP document fixed the I2C clock divider value limit from
16 bits instead of 10 bits. Without this change setting up the I2C clock to
low frequencies will not work as the prescaler value might be greater than
10 bit number.

I3C clock divider value is 10 bits only. Updating the macro names for both.

Signed-off-by: Harshit Shah <harshitshah.opendev@gmail.com>
Link: https://lore.kernel.org/r/1703927483-28682-1-git-send-email-harshitshah.opendev@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: time-travel: fix time corruption

[ Upstream commit abe4eaa8618bb36c2b33e9cdde0499296a23448c ]

In 'basic' time-travel mode (without =inf-cpu or =ext), we
still get timer interrupts. These can happen at arbitrary
points in time, i.e. while in timer_read(), which pushes
time forward just a little bit. Then, if we happen to get
the interrupt after calculating the new time to push to,
but before actually finishing that, the interrupt will set
the time to a value that's incompatible with the forward,
and we'll crash because time goes backwards when we do the
forwarding.

Fix this by reading the time_travel_time, calculating the
adjustment, and doing the adjustment all with interrupts
disabled.

Reported-by: Vincent Whitchurch <Vincent.Whitchurch@axis.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: net: Fix return type of uml_net_start_xmit()

[ Upstream commit 7d748f60a4b82b50bf25fad1bd42d33f049f76aa ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
warning in clang aims to catch these at compile time, which reveals:

  arch/um/drivers/net_kern.c:353:21: warning: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Wincompatible-function-pointer-types-strict]
    353 |         .ndo_start_xmit         = uml_net_start_xmit,
        |                                   ^~~~~~~~~~~~~~~~~~
  1 warning generated.

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of uml_net_start_xmit()
to match the prototype's to resolve the warning. While UML does not
currently implement support for kCFI, it could in the future, which
means this warning becomes a fatal CFI failure at run time.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310031340.v1vPh207-lkp@intel.com/
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Don't use vfprintf() for os_info()

[ Upstream commit 236f9fe39b02c15fa5530b53e9cca48354394389 ]

The threads allocated inside the kernel have only a single page of
stack. Unfortunately, the vfprintf function in standard glibc may use
too much stack-space, overflowing it.

To make os_info safe to be used by helper threads, use the kernel
vscnprintf function into a smallish buffer and write out the information
to stderr.

Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Fix naming clash between UML and scheduler

[ Upstream commit 541d4e4d435c8b9bfd29f70a1da4a2db97794e0a ]

__cant_sleep was already used and exported by the scheduler.
The name had to be changed to a UML specific one.

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: trigger: panic: Don't register panic notifier if creating the trigger failed

[ Upstream commit afacb21834bb02785ddb0c3ec197208803b74faa ]

It doesn't make sense to register the panic notifier if creating the
panic trigger failed.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8a61e229-5388-46c7-919a-4d18cc7362b2@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: baytrail: Fix types of config value in byt_pin_config_set()

[ Upstream commit 1a856a22e6036c5f0d6da7568b4550270f989038 ]

When unpacked, the config value is split to two of different types.
Fix the types accordingly.

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140

[ Upstream commit 7aeb259086487417f0fecf66e325bee133e8813a ]

When OMTP headset plugin the headset jack of CX8070 and SN6160 sound cards,
the headset type detection circuit will recognize the headset type as CTIA.
At this point, plugout and plugin the headset will get the correct headset
type as OMTP.
The reason for the failure of headset type recognition is that the sound
card creation will enable the VREF voltage of the headset mic, which
interferes with the headset type automatic detection circuit. Plugout and
plugin the headset will restart the headset detection and get the correct
headset type.
The patch is disable the VREF voltage when the headset is not present, and
will enable the VREF voltage when the headset is present.

Signed-off-by: bo liu <bo.liu@senarytech.com>
Link: https://lore.kernel.org/r/20240108110235.3867-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well

[ Upstream commit 16783d8ef08448815e149e40c82fc1e1fc41ddbf ]

These chips needs the same fix.  This was previously not seen
on then since the AGP aperture expanded the system aperture,
but this showed up again when AGP was disabled.

Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'

[ Upstream commit b1a428b45dc7e47c7acc2ad0d08d8a6dda910c4c ]

Fix the following about iterator use:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1456 kfd_add_peer_prop() warn: iterator used outside loop: 'iolink3'

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'

[ Upstream commit bf2ad4fb8adca89374b54b225d494e0b1956dbea ]

Return value of container_of(...) can't be null, so null check is not
required for 'fence'. Hence drop its NULL check.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c:93 to_amdgpu_amdkfd_fence() warn: can 'fence' even be NULL?

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'

[ Upstream commit 13a1851f923d9a7a78a477497295c2dfd16ad4a4 ]

Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:1404 amdgpu_ucode_request() warn: '*fw' from request_firmware() not released on lines: 1404.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Re-revert "drm/amd/display: Enable Replay for static screen use cases"

[ Upstream commit d6398866a6b47e92319ef6efdb0126a4fbb7796a ]

This reverts commit 44e60b14d5a72f91fd0bdeae8da59ae37a3ca8e5.

Since, it causes a regression in which eDP displays with PSR support,
but no Replay support (Sink support <= 0x03), fail to enable PSR and
consequently all IGT amd_psr tests fail. So, revert this until a more
suitable fix can be found.

This got brought back accidently with the backmerge.

Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Let KFD sync with VM fences

[ Upstream commit ec9ba4821fa52b5efdbc4cdf0a77497990655231 ]

Change the rules for amdgpu_sync_resv to let KFD synchronize with VM
fences on page table reservations. This fixes intermittent memory
corruption after evictions when using amdgpu_vm_handle_moved to update
page tables for VM mappings managed through render nodes.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix minor issues in BW Allocation Phase2

[ Upstream commit aa5dc05340eb97486a631ce6bccb8d020bf6b56b ]

[Why]
Fix minor issues in BW Allocation Phase2.

[How]
- In set_usb4_req_bw_req(), link->dpia_bw_alloc_config.response_ready
  flag should be reset before writing DPCD REQUEST_BW.
- Fix the granularity for value of 2 in get_bw_granularity().
- Removed bandwidth allocation support display fw boot option as
  the fw would read feature enable status from bios.
- Clean up DPIA_EST_BW_CHANGED and DPIA_BW_REQ_SUCCESS cases in
  dpia_handle_bw_alloc_response().
- Removed allocate_usb4_bw and deallocate_usb4_bw.
- Optimized loop in get_lowest_dpia_index().
- Updated link_dp_dpia_allocate_usb4_bandwidth_for_stream() and
  set_usb4_req_bw_req() to always issue request bw.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix ecc irq enable/disable unpaired

[ Upstream commit a32c6f7f5737cc7e31cd7ad5133f0d96fca12ea6 ]

The ecc_irq is disabled while GPU mode2 reset suspending process,
but not be enabled during GPU mode2 reset resume process.

Changed from V1:
only do sdma/gfx ras_late_init in aldebaran_mode2_restore_ip
delete amdgpu_ras_late_resume function

Changed from V2:
check umc ras supported before put ecc_irq

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks

[ Upstream commit 3f5f63adeea7e7aa715e101ffe4b4ac9705f9664 ]

To be compatible with SCU firmware based on 1.15 a different clock
routing for LVDS is needed.

Signed-off-by: Oliver F. Brown <oliver.brown@oss.nxp.com>
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231218122407.2757175-1-alexander.stein@ew.tq-group.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Only clear symclk otg flag for HDMI

[ Upstream commit dff45f03f508c92cd8eb2050e27b726726b8ae0b ]

[Description]
There is a corner case where the symclk otg flag is cleared
when disabling the phantom pipe for subvp (because the phantom
and main pipe share the same link). This is undesired because
we need the maintain the correct symclk otg flag state for
the main pipe.

For now only clear the flag only for HDMI signal type, since
it's only set for HDMI signal type (phantom is virtual). The
ideal solution is to not clear it if the stream is phantom but
currently there's a bug that doesn't allow us to do this. Once
this issue is fixed the proper fix can be implemented.

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: make flip_timestamp_in_us a 64-bit variable

[ Upstream commit 6fb12518ca58412dc51054e2a7400afb41328d85 ]

[Why]
This variable currently overflows after about 71 minutes. This doesn't
cause any known functional issues but it does make debugging more
difficult.

[How]
Make it a 64-bit variable.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

accel/habanalabs: add support for Gaudi2C device

[ Upstream commit 42422993cf28d456778ee9168d73758ec037cd51 ]

Gaudi2 with PCI revision ID with the value of '3' represents Gaudi2C
device and should be detected and initialized as Gaudi2.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: it87_wdt: Keep WDTCTRL bit 3 unmodified for IT8784/IT8786

[ Upstream commit d12971849d71781c1e4ffd1117d4878ce233d319 ]

WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786.
Some motherboards require this bit to be set to 1 (= PCICLK mode),
otherwise the watchdog functionality gets broken. The BIOS of those
motherboards sets WDTCTRL bit 3 already to 1.

Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep
bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps
the status as set by the BIOS of the motherboard.

Watchdog tests have been successful with this patch with the following
systems:
  IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2)
  IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2)
  IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L)

Link: https://lore.kernel.org/all/140b264d-341f-465b-8715-dacfe84b3f71@roeck-us.net/
Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-4-devlists@wefi.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: starfive: add lock annotations to fix context imbalances

[ Upstream commit f77999887235f8c378af343df11a6bcedda5b284 ]

Add the necessary __acquires() and __releases() to the functions
that take and release the wdt lock to avoid the following sparse
warnings:

drivers/watchdog/starfive-wdt.c:204:13: warning: context imbalance in 'starfive_wdt_unlock' - wrong count at exit
drivers/watchdog/starfive-wdt.c:212:9: warning: context imbalance in 'starfive_wdt_lock' - unexpected unlock

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231122085118.177589-1-ben.dooks@codethink.co.uk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mmp: pxa168: Fix memory leak in pxa168_clk_init()

[ Upstream commit 2fbabea626b6467eb4e6c4cb7a16523da12e43b4 ]

In cases where mapping of mpmu/apmu/apbc registers fails, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'pxa_unit' before returning.

Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20231210175232.3414584-1-visitorckw@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: hi3620: Fix memory leak in hi3620_mmc_clk_init()

[ Upstream commit bfbea9e5667cfa9552c3d88f023386f017f6c308 ]

In cases where kcalloc() fails for the 'clk_data->clks' allocation, the
code path does not handle the failure gracefully, potentially leading
to a memory leak. This fix ensures proper cleanup by freeing the
allocated memory for 'clk_data' before returning.

Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20231210165040.3407545-1-visitorckw@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap

[ Upstream commit 94aeb4117343d072e3a35b9595bcbfc0058ee724 ]

Issue: during evict or validate happened on amdgpu_bo, the 'from' and
'to' is always same in ftrace event of amdgpu_bo_move

where calling the 'trace_amdgpu_bo_move', the comment says move_notify
is called before move happens, but actually it is called after move
happens, here the new_mem is same as bo->resource

Fix: move trace_amdgpu_bo_move from move_notify to amdgpu_bo_move

Signed-off-by: Wang, Beyond <Wang.Beyond@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: fix writeback programming for YUV cases

[ Upstream commit 79caf2f2202b9eaad3a5a726e4b33807f67d0f1b ]

For YUV cases, setting the required format bits was missed
out in the register programming. Lets fix it now in preparation
of adding YUV formats support for writeback.

changes in v2:
    - dropped the fixes tag as its not a fix but adding
      new functionality

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571814/
Link: https://lore.kernel.org/r/20231212205254.12422-4-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Ratelimit framedone timeout msgs

[ Upstream commit 2b72e50c62de60ad2d6bcd86aa38d4ccbdd633f2 ]

When we start getting these, we get a *lot*.  So ratelimit it to not
flood dmesg.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/571584/
Link: https://lore.kernel.org/r/20231211182000.218088-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: enable writeback on SM8450

[ Upstream commit eaa647cdbf2e357b4a14903f2f1e47ed9c4f8df3 ]

Enable WB2 hardware block, enabling writeback support on this platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570187/
Link: https://lore.kernel.org/r/20231203002743.1291956-4-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: enable writeback on SM8350

[ Upstream commit c2949a49dfe960e952400029e14751dceff79d38 ]

Enable WB2 hardware block, enabling writeback support on this platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570188/
Link: https://lore.kernel.org/r/20231203002743.1291956-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: fix mes set shader debugger process management

[ Upstream commit bd33bb1409b494558a2935f7bbc7842def957fcd ]

MES provides the driver a call to explicitly flush stale process memory
within the MES to avoid a race condition that results in a fatal
memory violation.

When SET_SHADER_DEBUGGER is called, the driver passes a memory address
that represents a process context address MES uses to keep track of
future per-process calls.

Normally, MES will purge its process context list when the last queue
has been removed.  The driver, however, can call SET_SHADER_DEBUGGER
regardless of whether a queue has been added or not.

If SET_SHADER_DEBUGGER has been called with no queues as the last call
prior to process termination, the passed process context address will
still reside within MES.

On a new process call to SET_SHADER_DEBUGGER, the driver may end up
passing an identical process context address value (based on per-process
gpu memory address) to MES but is now pointing to a new allocated buffer
object during KFD process creation.  Since the MES is unaware of this,
access of the passed address points to the stale object within MES and
triggers a fatal memory violation.

The solution is for KFD to explicitly flush the process context address
from MES on process termination.

Note that the flush call and the MES debugger calls use the same MES
interface but are separated as KFD calls to avoid conflicting with each
other.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>