Sergio Paracuellos [Mon, 7 Jun 2021 12:01:53 +0000 (14:01 +0200)]
staging: mt7621-pci: make use of 'pcie_port_write'
Function 'mt7621_pcie_enable_port' is calculating an offset
to write some port related registers. Instead of doing that
just make use of already existent 'pcie_write_port' function
and use virtualy mapped base address with registers. This
increase readability and allow us to remove also two defitions
not used else where.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210607120153.24989-7-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 7 Jun 2021 12:01:52 +0000 (14:01 +0200)]
staging: mt7621-pci: parse some dt properties from root port child nodes
Properties 'clocks', 'resets' and 'phys' have been moved from parent
node to the root port children. Hence we have to adapt the way device
tree is parsed in driver code to properly align things and make all
the stuff work.
Note that we moved from using 'devm_reset_control_get_exclusive() to
'of_reset_control_get_exclusive()' so we need to properly call the
'reset_control_put()' function manually in error and remove paths.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210607120153.24989-6-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 7 Jun 2021 12:01:51 +0000 (14:01 +0200)]
staging: mt7621-dts: move some properties into root port child nodes
After a review of the bindings 'clocks', 'resets' and 'phys' must
be moved into root port child nodes. Hence, move all of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210607120153.24989-5-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 7 Jun 2021 12:01:50 +0000 (14:01 +0200)]
staging: mt7621-pci: use {readl|writel}_relaxed instead of readl/writel
The driver does not perform DMA, so it's safe to use the relaxed version
for both readl and writel operations.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210607120153.24989-4-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 7 Jun 2021 12:01:49 +0000 (14:01 +0200)]
staging: mt7621-pci: remove 'RALINK_PCI_BAR0SETUP_ADDR' definition
Instead of define RALINK_PCI_BAR0SETUP_ADDR just use standard
pci defnition for this which is 'PCI_BASE_ADDRESS_0'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210607120153.24989-3-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 7 Jun 2021 12:01:48 +0000 (14:01 +0200)]
staging: mt7621-pci: make cleaner 'mt7621_pcie_enable_ports'
Function 'mt7621_pcie_enable_ports' call 'mt7621_pcie_enable_port'
for each available pcie port. Instead of having two for loops
there just move needed initialization. There is one setting
that can be removed which is the set for 'PCI_COMMAND_MASTER'
bit. Pci drivers are in charge of set that bit if is really
needed and should be not a mission of the controller to do that.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210607120153.24989-2-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 9 Jun 2021 10:11:49 +0000 (12:11 +0200)]
Merge tag 'iio-for-5.14a' of https://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
1st set of new IIO/counter device support, features and cleanup for 5.14
There are a couple of large cleanup sets in here alongside a number of new
drivers.
Note an immutable branch merged to add a stub for i2c_verify_client()
as needed to avoid a build issue in the fxls8962af driver as a result of a
workaround for a device errata that only applies when i2c interface is used.
Counters
========
New device support
* intel,quadrature encoder peripheral found on Elkhart Lake platforms.
- New driver.
IIO
===
New device support
* amstaos,tsl2591 ambient light sensor.
- New driver + bindings
- Follow up fix to ensure some local variables are suitable for error
handling.
* fsl,fxls8962af + fsl,fxls8964af accelerometers
- New driver + bindings
- Includes an errata work around that cause a build bot failure fixed
by adding a stub to i2c.
* kionix,kxcjk-1013
- Add support for KX023-1025 device. Mostly a different register map
that needed to be supported.
* murata,sca3300 accelerometer
- New driver + bindings
* st,lsm9ds0 IMU
- Rework of st,sensors driver to cleanly support this new glue driver
that enables the two parts of the LSM9DS0.
* ti,tsc2046 touchscreen controller ADC.
- New driver. Intent here is to use this with existing IIO consumer
drivers such as resistive-adc-touch.
- Follow up fix to avoid an issue with unsigned subtraction in error
check.
* ti,tmp117 digital temperature sensor
- New driver + bindings
Features
* adi,ad5755
- Add missing dt-binding doc
* adi,ad7298
- Add ACPI ID used on Intel Galileo Gen 1 boards.
- Add missing dt-binding doc
* adi,ad7476
- Add missing dt-binding doc
* adi,ad7746
- Add missing dt-binding doc for this driver that will hopefully move out
of staging shortly. Update staging driver to use the binding instead of
platform data.
* adi,adis16201 + adis16209
- Add missing dt-binding doc
* adi,adis16480
- Support burst mode for adis16495 and adis16497 parts.
* bosch,bma220
- Add missing dt-binding doc
* fsl,mma7455
- Add missing dt-binding doc
* iio-rescale
- Support handling of processed channels from provider. Some ADCs
require (typically non linear) calibration functions to be applied,
and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
used as providers to the iio-rescale driver which needs to handle them
somewhat differently from IIO_CHAN_INFO_RAW
* sensiron,sps30
- Support the serial interface. Note this required significant
refactoring of existing driver.
* st,st-sensors
- Add mount matrix support for normal dt-binding whilst continuing to
support the odd ACPI approach for accelerometers.
* ti,dac082s085 + similar
- Add missing dt-binding doc
* trivial-devices - add entries for
- memsic,mx4005, memsic,mx6255 and memsic,mxc6655
- sensortek,stk8312 and sensortek,stk8ba50
Cleanup / minor fixes
* core
- Use devm_add_action_or_reset() to replace boilerplate in several
driver and core IIO devm_* functions.
- Fix an error path issue introduced by above, that could return an
error pointer rather than the expected null from dev_iio_device_alloc()
- Move more IIO internals related fields from struct iio_dev to
struct iio_dev_opaque.
- Drop unused final update of in_loc in demux setup.
* Docs
- Move some docs from driver specific to core dos to avoid replication
of names which the documentation builder does not allow.
Note this means adding a few device specific notes to the general docs
to cover the more unusual uses of the ABI.
- ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
have the bufferX/* variant. Not we are not getting rid of these
interfaces, just encouraging new code to use the new interface.
* IIO wide:
- Tidy up new cases of dev.parent etc being set in drivers as the core
now does it.
- Fix more cases of possible miss-aligned buffers when passed to
iio_push_to_buffers_with_timestamp(). Note we only have one known
instance of anyone seeing this bug actually happening, so this has been
a low priority cleanup effort for several cycles.
- sysfs_emit() used in more drivers.
- Runtime pm tidy up and use of pm_runtime_resume_and_get()
- Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
that the timestamp when inserted by naturally aligned + consumers can
assume that all fields are naturally aligned. Part of a long running
effort, with at least 2 more series to come tackling additional
variants.
- Stop specifying "mount-matrix" property name in every lookup of the
mount matrix from firmware by hard coding it in the core.
* adi,ad7476
- Handle the variety of different regulators used by the parts supported
by this driver (came up in dt-binding review)
* adi,ad7746
- Trivial drop of if (ret) return ret; return 0; pattern
- Tidy up comments
- Pull capdac setup out to own function.
* adi,ad7766
- Trivial drop of if (ret) return ret; return 0; pattern
* adi,adis
- Avoid returning error codes in interrupt handlers.
- Handle a failure in spi_write in the trigger handler.
- Rework to add updating of device page after changing it.
- Don't push data to IIO buffers when read failed.
- Add configuration of burst max speed to core avoid handling this in
each driver.
- Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
- Excessive includes cleanup via include-what-you-use static checker
after zero day highlighted that these needed updating.
* afe
- Amend binding to add #io-channel-cells, thus allowing this IIO
consumer to also be an IIO provider.
* aosong,am2315
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* bosch,bma180
- Adding missing bandwidth settings (500, 1000 Hz)
* bosch,bme680
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* ep93xx_adc,
- Drop a redundant error print.
* maxim,max118
- Convert remainder of probe() to devm_ managed functions.
- Avoid some repeated jumping back and forth between iio_dev and
spi structures.
* maxim,max11100
- Use get_unaligned_be16() instead of open coding.
- Convert remainder of probe() to devm_ managed functions.
* samsung,exynos_adc
- Unused error value dropped.
* sensiron,sgp30
- Drop use of %hx in favor of %x and letting the normal type conversion
work.
* sensortek,stk8312
- Add lowercase device id and note uppercase version deprecated.
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* sprx,sc72xx_adc
- add MODULE_DEVICE_TABLE
* st,lsm6dsx
- Fix docs of valid ODRs
* st,sensors
- dt-binding rework. Two efforts on this crossed in a previous cycle
so this update cherry picks the best of the two yaml conversions.
- Don't copy the channel spec array as now ext_info is no longer modified.
* st,stm32-adc
- tidy up some docs that were marked as kernel-doc but aren't.
* ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
- Convert remainder of probe() functions to devm_ managed functions
to simplify error handing and remove paths.
* tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (171 commits)
i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
iio: adis: Cleanout unused headers
iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth
counter: Add support for Intel Quadrature Encoder Peripheral
staging: iio: cdc: ad7746: extract capac setup to own function
staging: iio: cdc: ad7746: clean up probe return
staging: iio: cdc: ad7746: remove ordinary comments
iio: adc: ti-adc161s626: Use devm managed functions for all of probe.
iio: adc: ti-adc108s102: Use devm managed functions for all of probe()
iio: adc: ti-adc0832: Use devm managed functions for all of probe()
iio: adc: ti-adc081c: Use devm managed functions for all of probe()
iio: adc: max1118: Avoid jumping back and forth between spi and iio structures
iio: adc: max1118: Use devm_ managed functions for all of probe
iio: adc: max11100: Use devm_ functions for rest of probe()
iio: adc: max11100: Use get_unaligned_be16() rather than opencoding.
iio: chemical: sgp30: Drop use of %hx in format string.
iio: gyro: st_gyro: Support mount matrix
iio: magnetometer: st_magn: Support mount matrix
iio: accel: st_sensors: Stop copying channels
iio: accel: st_sensors: Support generic mounting matrix
...
Fabio M. De Francesco [Sun, 6 Jun 2021 03:40:38 +0000 (05:40 +0200)]
staging: rtl8712: Remove unnecessary alias of printk()
This module defines four alias for printk(). Removed them
all, because they are not used anywhere else in the driver.
Converted the only exception to the explicit use of printk().
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210606034038.9657-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Cameron [Mon, 7 Jun 2021 08:20:02 +0000 (09:20 +0100)]
Merge branch 'ib-iio-i2c-5.13rc1' into togreg
Adds a stub needed to resolve a build conflict for the
fxls8962af driver.
Jonathan Cameron [Thu, 3 Jun 2021 16:58:35 +0000 (17:58 +0100)]
i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
If I2C is not compiled, there is no way we should see a call to
i2c_verify_client() on a device that is an i2c client. As such,
provide a stub to return NULL to resolve an associated build failure.
The build is failing with this link error
ld: fxls8962af-core.o: in function `fxls8962af_fifo_transfer':
fxls8962af-core.c: undefined reference to `i2c_verify_client'
Reported-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes:
af959b7b96b8 ("iio: accel: fxls8962af: fix errata bug E3 - I2C burst reads")
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20210603165835.3594557-1-jic23@kernel.org
Stefan Wahren [Thu, 3 Jun 2021 15:50:05 +0000 (17:50 +0200)]
staging: vchiq_core: introduce handle_poll
The function slot_handler_func() has very deep indentations. Moving the
poll handling into separate function could improve the readability.
Use the return value to keep the poll_needed handling at the same place.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-17-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:50:04 +0000 (17:50 +0200)]
staging: vchiq_connected: move EXPORT_SYMBOL below the right function
It's more intuitive to have the EXPORT_SYMBOL() call below the matching
definition.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-16-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:50:03 +0000 (17:50 +0200)]
staging: vchiq_core: store message id in local variable
Some queue_message() calls are still rather complex to read. So store
the message ids in a local variable in those cases.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-15-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:50:02 +0000 (17:50 +0200)]
staging: vchiq_core: reduce indentation in parse_open
The function parse_open() already has bail out sections like fail_open.
So use a goto for the other error cases like payload size is too small
and listening service cannot be found. This avoids two indentation levels.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-14-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:50:01 +0000 (17:50 +0200)]
staging: vchiq_core: introduce process_free_data_message
This moves the special handling for data messages from process_free_queue()
into a new function. After this process_free_queue() has less extreme
indentation and should be easier to read.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-13-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:50:00 +0000 (17:50 +0200)]
staging: vchiq_arm: tidy up service function naming
During a recent review Dan Carpenter reported that the function naming of
(un)lock_service is misleading. They are like wrapper around kref_get /
kref_put and don't have anything to do with locking. So use a name which
represent more the actual behavior. Btw add the vchiq prefix to avoid
possible name conflicts.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-12-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:49:59 +0000 (17:49 +0200)]
staging: vchiq_core: simplify WARN_ON conditions
During a recent review Dan Carpenter noticed a double negation in a WARN_ON.
But a quick search revealed more unnecessary complex WARN_ON conditions.
This change should simplify them.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-11-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:49:58 +0000 (17:49 +0200)]
staging: vchiq_core: introduce message specific make macros
VCHIQ_MAKE_MSG isn't optimal because a lot of message types doesn't need
a parameter. So better define a macro for every message type which is used.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-10-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:49:57 +0000 (17:49 +0200)]
staging: vchiq_core: use define for message type shift
Make it clear and use a define for shifting the message type.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-9-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:49:56 +0000 (17:49 +0200)]
staging: vchiq_core: avoid precedence issues
Add () around macro argument to avoid precedence issues
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-8-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:49:55 +0000 (17:49 +0200)]
staging: vchiq_core: put spaces around operators
This fixes the checkpatch issues regarding missing spaces around operators.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-7-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:49:54 +0000 (17:49 +0200)]
staging: vchiq_core: get the rid of vchiq_static_assert
Use static_assert from the kernel instead of opencode it.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-6-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:49:53 +0000 (17:49 +0200)]
staging: vchiq_core: get the rid of IS_POW2
The macro IS_POW2 is only used to ensure some size are powers of 2.
Better use BUILD_BUG_ON_NOT_POWER_OF_2 for this. Since this must be done
in a function, merge all these checks in a new function.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-5-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:49:52 +0000 (17:49 +0200)]
staging: vchiq_core: move internals to C source
There is no need to export those definitions, so keep them in the
source file.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-4-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:49:51 +0000 (17:49 +0200)]
staging: vchiq_arm: introduce free_bulk_waiter
Avoid the copy & paste of freeing the bulk waiter and move it into a
separate function. Found by CPD.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-3-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 3 Jun 2021 15:49:50 +0000 (17:49 +0200)]
staging: vchiq_core: fix logic in poll_services_of_group
Commit "staging: vchiq_core: avoid indention in poll_services_of_group"
tries to reduce the indention, but the parts regarding the third if statement
breaks the logic. So restore them and prevent vchiq_test from hanging during
the ping test.
Fixes:
2f440843a7d4 ("staging: vchiq_core: avoid indention in poll_services_of_group")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-2-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 4 Jun 2021 06:30:31 +0000 (08:30 +0200)]
staging: mt7621-dts: review pcie overlay in 'gbpc1' dts file
pcie node is being overlayed in 'gbpc1.dts' file requesting three
gpio reset pins for each pcie port. Gnubee only needs general
gpio 19 to properly reset and make all of them work. This pin
is already requested in the general 'mt7621.dtsi' file as well
as is the pinctrl pins. So we only need to enable the node
in the overlay and all the other stuff can be safely deleted.
Also, pin 8 is being requested for gpio-leds node and there
was an error on boot before this changes because of pin was
already assigned (EBUSY):
leds-gpio: probe of gpio-leds failed with error -16
With this changes this error has disappear and the board is
properly booting without any other regression.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210604063031.13599-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Cameron [Thu, 3 Jun 2021 19:36:16 +0000 (20:36 +0100)]
iio: adis: Cleanout unused headers
0-day recently added the include-what-you-use header checker and
it gave a warning on an adis patch. As such I decided to
run it on all the adis drivers and see if it made sensible suggestions.
Note this doesn't represent a complete list of what it suggested changing
as I filtered out a few on the basis they are standard headers used to
effectively include a bunch of other headers.
Could split this into a patch per driver if people prefer.
Note to anyone else trying this tool is that it is somewhat
of a loose cannon so you will be wanting to carefully check any
suggestions before proposing patches!
I thought about also reorganising the headers whilst here, but
that would make this patch harder to read, or lead to another rather
noisy patch across most of the files.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210603193616.3708447-1-jic23@kernel.org
Stephan Gerhold [Wed, 26 May 2021 09:44:08 +0000 (11:44 +0200)]
iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth
According to the BMA253 datasheet [1] and BMA250 datasheet [2] BMA25x
also supports a bandwidth of 500 Hz and 1000 Hz but this was not listed
in the driver for some reason.
Add it to the bw_table to make the driver match the datasheet.
[1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf
[2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-
15540103.pdf
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526094408.34298-3-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jarkko Nikula [Wed, 2 Jun 2021 11:32:59 +0000 (14:32 +0300)]
counter: Add support for Intel Quadrature Encoder Peripheral
Add support for Intel Quadrature Encoder Peripheral found on Intel
Elkhart Lake platform.
Initial implementation was done by Felipe Balbi while he was working at
Intel with later changes from Raymond Tan and me.
Co-developed-by: Felipe Balbi (Intel) <balbi@kernel.org>
Signed-off-by: Felipe Balbi (Intel) <balbi@kernel.org>
Co-developed-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20210602113259.158674-1-jarkko.nikula@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Lucas Stankus [Sun, 23 May 2021 17:12:37 +0000 (14:12 -0300)]
staging: iio: cdc: ad7746: extract capac setup to own function
Refactor the capdac register write logic to own function.
Also fixes the following checkpatch warning:
CHECK: Alignment should match open parenthesis
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/b637a5ecde4e5f9f927a5b104332378d4721c91d.1621786036.git.lucas.p.stankus@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Lucas Stankus [Sun, 23 May 2021 17:12:16 +0000 (14:12 -0300)]
staging: iio: cdc: ad7746: clean up probe return
Slight simplication of the probe return on device register.
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/45443b8306893576824effaff57d40231de8e813.1621786036.git.lucas.p.stankus@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Lucas Stankus [Sun, 23 May 2021 17:11:57 +0000 (14:11 -0300)]
staging: iio: cdc: ad7746: remove ordinary comments
Remove ordinary comments about typical driver structure.
Also align one comment with wrong indentation.
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Link: https://lore.kernel.org/r/e93e5efb19cee53546a339c1caf1ab344e9ff282.1621786036.git.lucas.p.stankus@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan Cameron [Sun, 16 May 2021 17:25:20 +0000 (18:25 +0100)]
iio: adc: ti-adc161s626: Use devm managed functions for all of probe.
Simplifies error handling and allows us to drop remove entirely.
The regulator handling in this driver was unusual as it would try to
acquire the regulator, but if that failed with an error would continue.
We should get a stub regulator if one isn't provided in DT and an error
could indicate an actual problem preventing the device being powered
(perhaps a need to defer). So this handling is cleaned up (arguably
that might be a fix but given no one has run into it, I haven't broken
it out separately.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210516172520.1398835-9-jic23@kernel.org
Jonathan Cameron [Sun, 16 May 2021 17:25:19 +0000 (18:25 +0100)]
iio: adc: ti-adc108s102: Use devm managed functions for all of probe()
Simplifies error handling and lets us drop remove() entirely.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Bogdan Pricop <bogdan.pricop@emutex.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210516172520.1398835-8-jic23@kernel.org
Jonathan Cameron [Sun, 16 May 2021 17:25:18 +0000 (18:25 +0100)]
iio: adc: ti-adc0832: Use devm managed functions for all of probe()
Simplifies error handling, plus allows us to drop the remove()
function entirely.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210516172520.1398835-7-jic23@kernel.org
Jonathan Cameron [Sun, 16 May 2021 17:25:17 +0000 (18:25 +0100)]
iio: adc: ti-adc081c: Use devm managed functions for all of probe()
Simplifies error handling and allows us to drop remove() entirely.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210516172520.1398835-6-jic23@kernel.org
Jonathan Cameron [Sun, 16 May 2021 17:25:16 +0000 (18:25 +0100)]
iio: adc: max1118: Avoid jumping back and forth between spi and iio structures
Changing from passing the spi structure into various functions to
passing struct iio_dev avoids use of spi_get_drvdata and lets us
stop setting that at all. Previous code was unnecessarily complex.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210516172520.1398835-5-jic23@kernel.org
Jonathan Cameron [Sun, 16 May 2021 17:25:15 +0000 (18:25 +0100)]
iio: adc: max1118: Use devm_ managed functions for all of probe
This simplifies error handling and allows us to drop the remove
function entirely.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210516172520.1398835-4-jic23@kernel.org
Jonathan Cameron [Sun, 16 May 2021 17:25:14 +0000 (18:25 +0100)]
iio: adc: max11100: Use devm_ functions for rest of probe()
By using devm_add_action_or_reset() to manage the regulator disable,
it becomes simple to use managed functions for all of remove.
This simplifies error handling and allows us to drop the remove()
function entirely.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210516172520.1398835-3-jic23@kernel.org
Jonathan Cameron [Sun, 16 May 2021 17:25:13 +0000 (18:25 +0100)]
iio: adc: max11100: Use get_unaligned_be16() rather than opencoding.
The function is more explicit in showing the intent + quicker on some
platforms.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210516172520.1398835-2-jic23@kernel.org
Jonathan Cameron [Mon, 17 May 2021 12:55:54 +0000 (13:55 +0100)]
iio: chemical: sgp30: Drop use of %hx in format string.
Since:
commit
cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")
use of these format strings has been discouraged.
As there are only a few such uses in IIO, lets clear them all out and
avoid chance of them getting copied into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Andreas Brauchli <andreas.brauchli@sensirion.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210517125554.1463156-5-jic23@kernel.org
Linus Walleij [Tue, 18 May 2021 23:07:22 +0000 (01:07 +0200)]
iio: gyro: st_gyro: Support mount matrix
Add support to read and present the mounting matrix on ST gyroscopes.
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210518230722.522446-5-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Linus Walleij [Tue, 18 May 2021 23:07:21 +0000 (01:07 +0200)]
iio: magnetometer: st_magn: Support mount matrix
Add support to read and present the mounting matrix on ST magnetometers.
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210518230722.522446-4-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Linus Walleij [Tue, 18 May 2021 23:07:20 +0000 (01:07 +0200)]
iio: accel: st_sensors: Stop copying channels
The channels were copied only so that the .ext_info member should become
assignable. We now have compile-time static assignment so drop this code.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Daniel Drake <drake@endlessm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210518230722.522446-3-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Linus Walleij [Tue, 18 May 2021 23:07:19 +0000 (01:07 +0200)]
iio: accel: st_sensors: Support generic mounting matrix
The ST accelerators support a special type of quirky mounting matrix found
in ACPI systems, but not a generic mounting matrix such as from the device
tree.
Augment the ACPI hack to be a bit more generic and accept a mounting
matrix from device properties.
This makes it possible to fix orientation on the Ux500 HREF device.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Daniel Drake <drake@endlessm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210518230722.522446-2-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Linus Walleij [Tue, 18 May 2021 23:07:18 +0000 (01:07 +0200)]
iio: st_sensors: Create extended attr macro
Extend ST_SENSORS_LSM_CHANNELS() to a version that will accept extended
attributes named ST_SENSORS_LSM_CHANNELS_EXT() and wrap the former as a
specialized version of the former.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Daniel Drake <drake@endlessm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210518230722.522446-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Nuno Sá [Thu, 20 May 2021 11:59:09 +0000 (13:59 +0200)]
iio: adis16136: make use of adis lock helpers
Use the adis lib lock helpers to lock the device. This makes things
consistent with other users of the library.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210520115909.466275-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Nuno Sá [Thu, 20 May 2021 11:59:08 +0000 (13:59 +0200)]
iio: adis16260: make use of adis lock helpers
Use the adis lib lock helpers to lock the device. This makes things
consistent with other users of the library.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210520115909.466275-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Lucas Stankus [Sat, 1 May 2021 12:32:53 +0000 (09:32 -0300)]
staging: iio: cdc: ad7746: use dt for capacitive channel setup.
Ditch platform_data fields in favor of device tree properties for
configuring EXCA and EXCB output pins and setting the capacitive channel
excitation level.
As this covers all current use cases for the platform_data struct, remove
ad7746.h header file since it's no longer needed.
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Link: https://lore.kernel.org/r/3e7f2a0a8960cece185f518ff2b7ceb87891edcd.1619841953.git.lucas.p.stankus@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Lucas Stankus [Sat, 1 May 2021 12:32:31 +0000 (09:32 -0300)]
dt-bindings: staging: iio: cdc: ad7746: add binding documentation for AD7746
Add device tree binding documentation for AD7746 cdc in YAML format.
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/2c2f4d486a94e0740e112bfac0d9306bdb7ea69c.1619841953.git.lucas.p.stankus@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Linus Walleij [Tue, 18 May 2021 09:27:41 +0000 (11:27 +0200)]
iio: afe: iio-rescale: Support processed channels
It happens that an ADC will only provide raw or processed
voltage conversion channels. (adc/ab8500-gpadc.c).
On the Samsung GT-I9070 this is used for a light sensor
and current sense amplifier so we need to think of something.
The idea is to allow processed channels and scale them
with 1/1 and then the rescaler can modify the result
on top.
Link: https://lore.kernel.org/linux-iio/20201101232211.1194304-1-linus.walleij@linaro.org/
Cc: Peter Rosin <peda@axentia.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20210518092741.403080-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tang Bin [Tue, 18 May 2021 09:56:47 +0000 (17:56 +0800)]
staging: iio: cdc: ad7746: Remove unnecessary assignment in ad7746_probe()
In the function ad7746_probe(), the initialized value of 'ret' is unused,
because it will be assigned by the function i2c_smbus_write_byte_data(),
thus remove it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210518095647.3008-1-tangbin@cmss.chinamobile.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Andy Shevchenko [Tue, 18 May 2021 11:25:46 +0000 (14:25 +0300)]
iio: Drop Duplicated "mount-matrix" parameter
All of the users of iio_read_mount_matrix() are using the very same
property name. Moreover, the property name is hard coded in the API
documentation.
Make this clear and avoid duplication now and in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210518112546.44592-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Nuno Sa [Thu, 22 Apr 2021 10:37:35 +0000 (12:37 +0200)]
iio: adis16480: support burst read function
Some supported devices support burst read function. This provides a method
for reading a batch of data (status, temperature, gyroscopes,
accelerometers, time stamp/data counter, and CRC code), which does not
require a stall time between each 16-bit segment and only requires one
command on the DIN line to initiate. Devices supporting this mode
are:
* adis16495-1
* adis16495-2
* adis16495-3
* adis16497-1
* adis16497-2
* adis16497-3
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210422103735.136367-1-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jiapeng Chong [Mon, 17 May 2021 10:11:57 +0000 (18:11 +0800)]
iio: buffer: Remove redundant assignment to in_loc
Variable in_loc is being assigned a value from a calculation
however the assignment is never read, so this redundant assignment
can be removed.
Clean up the following clang-analyzer warning:
drivers/iio/industrialio-buffer.c:929:3: warning: Value stored to
'in_loc' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1621246317-62725-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan Cameron [Sun, 9 May 2021 11:33:34 +0000 (12:33 +0100)]
iio: hid: trigger: Balance runtime pm + use pm_runtime_resume_and_get()
The call to pm_runtime_put_noidle() in remove() callback is not
balanced by any gets
Note this doesn't cause any problems beyond reader confusion as the runtime
pm core protects against the reference counter going negative.
Whilst here, use pm_runtiem_resume_and_get() to simplify code a little.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210509113354.660190-9-jic23@kernel.org
Dan Carpenter [Sat, 15 May 2021 09:51:52 +0000 (12:51 +0300)]
iio: adc: tsc2046: fix a warning message in tsc2046_adc_update_scan_mode()
These variables are unsigned so the condition can't be less than zero
and the warning message will never be printed.
Fixes:
9374e8f5a38d ("iio: adc: add ADC driver for the TI TSC2046 controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YJ+ZuO43TnguY5vq@mwanda
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Manikishan Ghantasala [Wed, 2 Jun 2021 19:33:32 +0000 (01:03 +0530)]
staging: rtl8192u: fix spaces in r8192U_hw.h
Fixed "please, no space before tabs" checkpatch warning.
Signed-off-by: Manikishan Ghantasala <manikishanghantasala@gmail.com>
Link: https://lore.kernel.org/r/20210602193334.11687-4-manikishanghantasala@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manikishan Ghantasala [Wed, 2 Jun 2021 19:33:31 +0000 (01:03 +0530)]
staging: rtl8192u: put parentheses on macros with complex values in r8192U_hw.h
Fix "Macros with complex values should be enclosed in parentheses" checkpatch error.
Signed-off-by: Manikishan Ghantasala <manikishanghantasala@gmail.com>
Link: https://lore.kernel.org/r/20210602193334.11687-3-manikishanghantasala@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manikishan Ghantasala [Wed, 2 Jun 2021 19:33:30 +0000 (01:03 +0530)]
staging: rtl8192u: r8192U_hw.h: fix spaces preferred around that '|' code style error
Fix "spaces preferred around that '|' " checkpatch CHECK.
Signed-off-by: Manikishan Ghantasala <manikishanghantasala@gmail.com>
Link: https://lore.kernel.org/r/20210602193334.11687-2-manikishanghantasala@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Fri, 28 May 2021 20:06:50 +0000 (15:06 -0500)]
staging: rtl8188eu: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead
of just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210528200650.GA39289@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kaiser [Sat, 29 May 2021 12:13:46 +0000 (14:13 +0200)]
staging: rtl8188eu: remove dummy setfreq handler
The setfreq handler contains only a debug print. It returns success
although the frequency wasn't set.
Remove this handler and inform callers that this driver does not
support setfreq.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210529121346.8422-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kaiser [Sat, 29 May 2021 12:13:45 +0000 (14:13 +0200)]
staging: rtl8188eu: remove dummy wext handlers
Remove the wext handlers that link to an empty dummy function.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210529121346.8422-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kaiser [Sat, 29 May 2021 12:13:44 +0000 (14:13 +0200)]
staging: rtl8188eu: use IW_HANDLER to declare wext handlers
Use the IW_HANDLER macro to declare the handler functions for
wext ioctls. We don't have to skip unused ioctl numbers manually.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210529121346.8422-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Khoa Tran Minh [Tue, 1 Jun 2021 17:59:25 +0000 (17:59 +0000)]
Staging: rtl8712: Cleanup coding style warning
This patch fixes checkpatch warning about multiple line dereference.
Signed-off-by: Khoa Tran Minh <ktm8@posteo.de>
Link: https://lore.kernel.org/r/YLZ1fc7BsaTo+ixQ@rue.localhost
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yu Kuai [Mon, 31 May 2021 14:02:34 +0000 (22:02 +0800)]
staging: rtl8723bs: core: rtw_mlme_ext.c: remove deadcode
'CHECK_EVENT_SEQ' is not defined anywhere, remove the deadcode.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20210531140234.3352465-1-yukuai3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaokun Zhang [Mon, 31 May 2021 07:37:58 +0000 (15:37 +0800)]
staging: rtl8192u: remove the repeated declaration
Functions 'ieee80211_stop_send_beacons' and 'notify_wx_assoc_event'
are declared twice in their header file, so remove the repeated
declaration.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1622446678-52652-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Bracht Laumann Jespersen [Thu, 27 May 2021 19:21:49 +0000 (21:21 +0200)]
staging: rtl8192u: Fix shadowed variable name
Fixes the following sparse warning:
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c:798:32: warning: symbol 'tcb_desc' shadows an earlier one
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c:550:24: originally declared here
Signed-off-by: Thomas Bracht Laumann Jespersen <t@laumann.xyz>
Link: https://lore.kernel.org/r/20210527192149.29686-1-t@laumann.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 31 May 2021 07:42:06 +0000 (09:42 +0200)]
Merge 5.13-rc4 into staging-next
We need the staging/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 30 May 2021 21:58:25 +0000 (11:58 -1000)]
Linux 5.13-rc4
Linus Torvalds [Sun, 30 May 2021 04:24:00 +0000 (18:24 -1000)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"This is a bit larger than usual at rc4 time. The reason is due to
Lee's work of fixing newly reported build warnings.
The rest is fixes as usual"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits)
MAINTAINERS: adjust to removing i2c designware platform data
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
i2c: busses: i2c-st: Fix copy/paste function misnaming issues
i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
i2c: I2C_HISI should depend on ACPI
...
Linus Torvalds [Sun, 30 May 2021 04:16:09 +0000 (18:16 -1000)]
Merge tag 'seccomp-fixes-v5.13-rc4' of git://git./linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This fixes a hard-to-hit race condition in the addfd user_notif
feature of seccomp, visible since v5.9.
And a small documentation fix"
* tag 'seccomp-fixes-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Refactor notification handler to prepare for new semantics
Documentation: seccomp: Fix user notification documentation
Linus Torvalds [Sun, 30 May 2021 04:10:10 +0000 (18:10 -1000)]
Merge tag 'riscv-for-linus-5.13-rc4' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of RISC-V related fixes:
- avoid errors when the stack tracing code is tracing itself.
- resurrect the memtest= kernel command line argument on RISC-V,
which was briefly enabled during the merge window before a
refactoring disabled it.
- build fix and some warning cleanups"
* tag 'riscv-for-linus-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Fix W=1 build warnings
riscv: kprobes: Fix build error when MMU=n
riscv: Select ARCH_USE_MEMTEST
riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled
Linus Torvalds [Sun, 30 May 2021 03:47:19 +0000 (17:47 -1000)]
Merge tag 'xfs-5.13-fixes-3' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This week's pile mitigates some decades-old problems in how extent
size hints interact with realtime volumes, fixes some failures in
online shrink, and fixes a problem where directory and symlink
shrinking on extremely fragmented filesystems could fail.
The most user-notable change here is to point users at our (new) IRC
channel on OFTC. Freedom isn't free, it costs folks like you and me;
and if you don't kowtow, they'll expel everyone and take over your
channel. (Ok, ok, that didn't fit the song lyrics...)
Summary:
- Fix a bug where unmapping operations end earlier than expected,
which can cause chaos on multi-block directory and symlink shrink
operations.
- Fix an erroneous assert that can trigger if we try to transition a
bmap structure from btree format to extents format with zero
extents. This was exposed by xfs/538"
* tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: bunmapi has unnecessary AG lock ordering issues
xfs: btree format inode forks can have zero extents
xfs: add new IRC channel to MAINTAINERS
xfs: validate extsz hints against rt extent size when rtinherit is set
xfs: standardize extent size hint validation
xfs: check free AG space when making per-AG reservations
Sargun Dhillon [Mon, 17 May 2021 19:39:06 +0000 (12:39 -0700)]
seccomp: Refactor notification handler to prepare for new semantics
This refactors the user notification code to have a do / while loop around
the completion condition. This has a small change in semantic, in that
previously we ignored addfd calls upon wakeup if the notification had been
responded to, but instead with the new change we check for an outstanding
addfd calls prior to returning to userspace.
Rodrigo Campos also identified a bug that can result in addfd causing
an early return, when the supervisor didn't actually handle the
syscall [1].
[1]: https://lore.kernel.org/lkml/
20210413160151.3301-1-rodrigo@kinvolk.io/
Fixes:
7cf97b125455 ("seccomp: Introduce addfd ioctl to seccomp user notifier")
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Rodrigo Campos <rodrigo@kinvolk.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210517193908.3113-3-sargun@sargun.me
Linus Torvalds [Sat, 29 May 2021 16:55:55 +0000 (06:55 -1000)]
Merge tag 'thermal-v5.13-rc4' of git://git./linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix uninitialized error code value for the SPMI adc driver (Yang
Yingliang)
- Fix kernel doc warning (Yang Li)
- Fix wrong read-write thermal trip point initialization (Srinivas
Pandruvada)
* tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()
thermal/ti-soc-thermal: Fix kernel-doc
thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID
Linus Torvalds [Sat, 29 May 2021 16:41:50 +0000 (06:41 -1000)]
Merge tag 'char-misc-5.13-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some tiny char/misc driver fixes for 5.13-rc4.
Nothing huge here, just some tiny fixes for reported issues:
- two interconnect driver fixes
- kgdb build warning fix for gcc-11
- hgafb regression fix
- soundwire driver fix
- mei driver fix
All have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: request autosuspend after sending rx flow control
kgdb: fix gcc-11 warnings harder
video: hgafb: correctly handle card detect failure during probe
soundwire: qcom: fix handling of qcom,ports-block-pack-mode
interconnect: qcom: Add missing MODULE_DEVICE_TABLE
interconnect: qcom: bcm-voter: add a missing of_node_put()
Linus Torvalds [Sat, 29 May 2021 16:33:28 +0000 (06:33 -1000)]
Merge tag 'driver-core-5.13-rc4' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver core / debugfs fixes for 5.13-rc4:
- debugfs fix for incorrect "lockdown" mode for selinux accesses
- two device link changes, one bugfix and one cleanup
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: base: Reduce device link removal code duplication
drivers: base: Fix device link removal
debugfs: fix security_locked_down() call for SELinux
Linus Torvalds [Sat, 29 May 2021 16:29:13 +0000 (06:29 -1000)]
Merge tag 'staging-5.13-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO and staging driver fixes for reported issues
for 5.13-rc4.
Nothing major here, tiny changes for reported problems, full details
are in the shortlog if people are curious.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: ad7793: Add missing error code in ad7793_setup()
iio: adc: ad7923: Fix undersized rx buffer.
iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()
iio: dac: ad5770r: Put fwnode in error case during ->probe()
iio: gyro: fxas21002c: balance runtime power in error path
staging: emxx_udc: fix loop in _nbu2ss_nuke()
staging: iio: cdc: ad7746: avoid overwrite of num_channels
iio: adc: ad7192: handle regulator voltage error first
iio: adc: ad7192: Avoid disabling a clock that was never enabled.
iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
Linus Torvalds [Sat, 29 May 2021 16:25:16 +0000 (06:25 -1000)]
Merge tag 'tty-5.13-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small fixes for reported problems for tty and serial
drivers for 5.13-rc4.
They consist of:
- 8250 bugfixes and new device support
- lockdown security mode fixup
- syzbot found problems fixed
- 8250_omap fix for interrupt storm
- revert of 8250_omap driver fix as it caused worse problem than the
original issue
All but the last patch have been in linux-next for a while, the last
one is a revert of a problem found in linux-next with the 8250_omap
driver change"
* tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
serial: 8250_pci: handle FL_NOIRQ board flag
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
serial: 8250_pci: Add support for new HPE serial device
serial: 8250: 8250_omap: Fix possible interrupt storm
serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
serial: 8250_dw: Add device HID for new AMD UART controller
serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
serial: core: fix suspicious security_locked_down() call
serial: tegra: Fix a mask operation that is always true
Linus Torvalds [Sat, 29 May 2021 16:11:21 +0000 (06:11 -1000)]
Merge tag 'usb-5.13-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of tiny USB and Thunderbolt driver fixes for
5.13-rc4.
They consist of:
- thunderbolt fixes for some NVM bound issues
- xhci fixes for reported problems
- control-request fixups
- documentation build warning fixes
- new usb-serial driver device ids
- typec bugfixes for reported issues
- usbfs warning fixups (could be triggered from userspace)
- other tiny fixes for reported problems.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall
xhci: fix giving back URB with incorrect status regression in 5.12
usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
usb: typec: tcpm: Respond Not_Supported if no snk_vdo
usb: typec: tcpm: Properly interrupt VDM AMS
USB: trancevibrator: fix control-request direction
usb: Restore the usb_header label
usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header
usb: typec: ucsi: Clear pending after acking connector change
usb: typec: mux: Fix matching with typec_altmode_desc
misc/uss720: fix memory leak in uss720_probe
usb: dwc3: gadget: Properly track pending and queued SG
USB: usbfs: Don't WARN about excessively large memory allocations
thunderbolt: usb4: Fix NVM read buffer bounds and offset issue
thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
usb: chipidea: udc: assign interrupt number to USB gadget structure
usb: cdnsp: Fix lack of removing request from pending list.
usb: cdns3: Fix runtime PM imbalance on error
USB: serial: pl2303: add device id for ADLINK ND-6530 GC
USB: serial: ti_usb_3410_5052: add startech.com device id
...
Linus Torvalds [Sat, 29 May 2021 16:02:25 +0000 (06:02 -1000)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
Linus Torvalds [Sat, 29 May 2021 15:51:53 +0000 (05:51 -1000)]
Merge tag 's390-5.13-3' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
"Fix races in vfio-ccw request handling"
* tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Serialize FSM IDLE state with I/O completion
vfio-ccw: Reset FSM state to IDLE inside FSM
vfio-ccw: Check initialized flag in cp_init()
Paolo Bonzini [Fri, 28 May 2021 19:10:58 +0000 (15:10 -0400)]
selftests: kvm: fix overlapping addresses in memslot_perf_test
vm_create allocates memory and maps it close to GPA. This memory
is separate from what is allocated in subsequent calls to
vm_userspace_mem_region_add, so it is incorrect to pass the
test memory size to vm_create_default. Just pass a small
fixed amount of memory which can be used later for page table,
otherwise GPAs are already allocated at MEM_GPA and the
test aborts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 29 May 2021 00:47:48 +0000 (14:47 -1000)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq
scsi: vmw_pvscsi: Set correct residual data length
scsi: bnx2fc: Return failure if io_req is already in ABTS processing
scsi: aic7xxx: Remove multiple definition of globals
scsi: aic7xxx: Restore several defines for aic7xxx firmware build
scsi: target: iblock: Fix smp_processor_id() BUG messages
scsi: libsas: Use _safe() loop in sas_resume_port()
scsi: target: tcmu: Fix xarray RCU warning
scsi: target: core: Avoid smp_processor_id() in preemptible code
Linus Torvalds [Sat, 29 May 2021 00:42:37 +0000 (14:42 -1000)]
Merge tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou
Pu)
- fix false keep-alive timeout when a controller is torn down
(Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)
- MD pull request (Song):
- Fix incorrect chunk boundary assert (Christoph)
- Fix s390/dasd verification panic (Stefan)
* tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
nvmet: fix false keep-alive timeout when a controller is torn down
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
md/raid5: remove an incorrect assert in in_chunk_boundary
s390/dasd: add missing discipline function
nvme-fabrics: decode host pathing error for connect
nvme-fc: short-circuit reconnect retries
nvme: fix potential memory leaks in nvme_cdev_add
Linus Torvalds [Sat, 29 May 2021 00:35:55 +0000 (14:35 -1000)]
Merge tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few minor fixes:
- Fix an issue with hashed wait removal on exit (Zqiang, Pavel)
- Fix a recent data race introduced in this series (Marco)"
* tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
io_uring: fix data race to avoid potential NULL-deref
io-wq: Fix UAF when wakeup wqe in hash waitqueue
io_uring/io-wq: close io-wq full-stop gap
Linus Torvalds [Sat, 29 May 2021 00:28:58 +0000 (14:28 -1000)]
Merge tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Pretty quiet this week, couple of amdgpu, one i915, and a few misc otherwise.
ttm:
- prevent irrelevant swapout
amdgpu:
- MultiGPU fan fix
- VCN powergating fixes
amdkfd:
- Fix SDMA register offset error
meson:
- fix shutdown crash
i915:
- Re-enable LTTPR non-transparent LT mode for DPCD_REV < 1.4"
* tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm:
drm/ttm: Skip swapout if ttm object is not populated
drm/i915: Reenable LTTPR non-transparent LT mode for DPCD_REV<1.4
drm/meson: fix shutdown crash when component not probed
drm/amdgpu/jpeg3: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn3: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate
drm/amdkfd: correct sienna_cichlid SDMA RLC register offset error
drm/amd/pm: correct MGpuFanBoost setting
Linus Torvalds [Sat, 29 May 2021 00:23:05 +0000 (14:23 -1000)]
Merge tag 'perf-tools-fixes-for-v5.13-2021-05-28' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix error checking of BPF prog attachment in 'perf stat'.
- Fix getting maximum number of fds in the vendor events JSON parser.
- Move debug initialization earlier, fixing a segfault in some cases.
- Fix eventcode of power10 JSON events.
* tag 'perf-tools-fixes-for-v5.13-2021-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf vendor events powerpc: Fix eventcode of power10 JSON events
perf stat: Fix error check for bpf_program__attach
perf debug: Move debug initialization earlier
perf jevents: Fix getting maximum number of fds
Linus Torvalds [Sat, 29 May 2021 00:15:47 +0000 (14:15 -1000)]
Merge tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three SMB3 fixes.
Two for stable, and the other fixes a problem pointed out with a
recently added ioctl"
* tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
cifs: fix string declarations and assignments in tracepoints
cifs: set server->cipher_type to AES-128-CCM for SMB3.0
Linus Torvalds [Fri, 28 May 2021 18:53:19 +0000 (08:53 -1000)]
Merge tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Stable fixes:
- Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
- Fix Oops in xs_tcp_send_request() when transport is disconnected
- Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
Bugfixes:
- Fix instances where signal_pending() should be fatal_signal_pending()
- fix an incorrect limit in filelayout_decode_layout()
- Fixes for the SUNRPC backlogged RPC queue
- Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
- Revert commit
586a0787ce35 ("Clean up rpcrdma_prepare_readch()")"
* tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Remove trailing semicolon in macros
xprtrdma: Revert
586a0787ce35
NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
NFS: Clean up reset of the mirror accounting variables
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
SUNRPC: More fixes for backlog congestion
SUNRPC: Fix Oops in xs_tcp_send_request() when transport is disconnected
NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
SUNRPC in case of backlog, hand free slots directly to waiting task
pNFS/NFSv4: Remove redundant initialization of 'rd_size'
NFS: fix an incorrect limit in filelayout_decode_layout()
fs/nfs: Use fatal_signal_pending instead of signal_pending
Linus Torvalds [Fri, 28 May 2021 18:47:50 +0000 (08:47 -1000)]
Merge tag 'sound-5.13-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly high volume at this time due to pending ASoC fixes.
While there are a few generic simple-card fixes for regressions, most
of the changes are device-specific fixes: ASoC Intel SOF, codec
clocks, other codec / platform fixes as well as usual HD-audio and
USB-audio"
* tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340
ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static
ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i
ALSA: hda/realtek: Headphone volume is controlled by Front mixer
ALSA: usb-audio: scarlett2: Improve driver startup messages
ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
ALSA: usb-audio: fix control-request direction
ASoC: qcom: lpass-cpu: Use optional clk APIs
ASoC: cs35l33: fix an error code in probe()
ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware
ASoC: fsl: fix SND_SOC_IMX_RPMSG dependency
ASoC: cs42l52: Minor tidy up of error paths
ASoC: cs35l32: Add missing regmap use_single config
ASoC: cs35l34: Add missing regmap use_single config
ASoC: cs42l73: Add missing regmap use_single config
ASoC: cs53l30: Add missing regmap use_single config
...
Linus Torvalds [Fri, 28 May 2021 18:31:48 +0000 (08:31 -1000)]
Merge tag 'clang-features-v5.13-rc4' of git://git./linux/kernel/git/kees/linux
Pull clang feature fixes from Kees Cook:
- Correctly pass stack frame size checking under LTO (Nick Desaulniers)
- Avoid CFI mismatches by checking initcall_t types (Marco Elver)
* tag 'clang-features-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Makefile: LTO: have linker check -Wframe-larger-than
init: verify that function is initcall_t at compile-time
Linus Torvalds [Fri, 28 May 2021 18:24:13 +0000 (08:24 -1000)]
Merge tag 'mips-fixes_5.13_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix function/preempt trace hangs
- a few build fixes
* tag 'mips-fixes_5.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER
MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c
MIPS: launch.h: add include guard to prevent build errors
MIPS: alchemy: xxs1500: add gpio-au1000.h header file
Paolo Bonzini [Fri, 28 May 2021 17:02:03 +0000 (13:02 -0400)]
Merge tag 'kvmarm-fixes-5.13-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.13, take #2
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
Wanpeng Li [Fri, 28 May 2021 00:01:37 +0000 (17:01 -0700)]
KVM: X86: Kill off ctxt->ud
ctxt->ud is consumed only by x86_decode_insn(), we can kill it off by
passing emulation_type to x86_decode_insn() and dropping ctxt->ud
altogether. Tracking that info in ctxt for literally one call is silly.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
1622160097-37633-2-git-send-email-wanpengli@tencent.com>
Wanpeng Li [Fri, 28 May 2021 00:01:36 +0000 (17:01 -0700)]
KVM: X86: Fix warning caused by stale emulation context
Reported by syzkaller:
WARNING: CPU: 7 PID: 10526 at linux/arch/x86/kvm//x86.c:7621 x86_emulate_instruction+0x41b/0x510 [kvm]
RIP: 0010:x86_emulate_instruction+0x41b/0x510 [kvm]
Call Trace:
kvm_mmu_page_fault+0x126/0x8f0 [kvm]
vmx_handle_exit+0x11e/0x680 [kvm_intel]
vcpu_enter_guest+0xd95/0x1b40 [kvm]
kvm_arch_vcpu_ioctl_run+0x377/0x6a0 [kvm]
kvm_vcpu_ioctl+0x389/0x630 [kvm]
__x64_sys_ioctl+0x8e/0xd0
do_syscall_64+0x3c/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Commit
4a1e10d5b5d8 ("KVM: x86: handle hardware breakpoints during emulation())
adds hardware breakpoints check before emulation the instruction and parts of
emulation context initialization, actually we don't have the EMULTYPE_NO_DECODE flag
here and the emulation context will not be reused. Commit
c8848cee74ff ("KVM: x86:
set ctxt->have_exception in x86_decode_insn()) triggers the warning because it
catches the stale emulation context has #UD, however, it is not during instruction
decoding which should result in EMULATION_FAILED. This patch fixes it by moving
the second part emulation context initialization into init_emulate_ctxt() and
before hardware breakpoints check. The ctxt->ud will be dropped by a follow-up
patch.
syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=
134683fdd00000
Reported-by: syzbot+71271244f206d17f6441@syzkaller.appspotmail.com
Fixes:
4a1e10d5b5d8 (KVM: x86: handle hardware breakpoints during emulation)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
1622160097-37633-1-git-send-email-wanpengli@tencent.com>
Yuan Yao [Wed, 26 May 2021 06:38:28 +0000 (14:38 +0800)]
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
The kvm_get_linear_rip() handles x86/long mode cases well and has
better readability, __kvm_set_rflags() also use the paired
function kvm_is_linear_rip() to check the vcpu->arch.singlestep_rip
set in kvm_arch_vcpu_ioctl_set_guest_debug(), so change the
"CS.BASE + RIP" code in kvm_arch_vcpu_ioctl_set_guest_debug() and
handle_exception_nmi() to this one.
Signed-off-by: Yuan Yao <yuan.yao@intel.com>
Message-Id: <
20210526063828.1173-1-yuan.yao@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sargun Dhillon [Mon, 17 May 2021 19:39:05 +0000 (12:39 -0700)]
Documentation: seccomp: Fix user notification documentation
The documentation had some previously incorrect information about how
userspace notifications (and responses) were handled due to a change
from a previously proposed patchset.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Fixes:
6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210517193908.3113-2-sargun@sargun.me