Staging: altpciechdma: Add missing __devexit_p()

The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix the problem that file_ext->state should be protected by device_lock

While access file_ext->state, we should use device_lock to protect it. The
original codes miss this in some places.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: do not print error when heci_bh_handler is already on workqueue

schedule_work returns 0, if the work is already on the work_queue, else
returns non-zero. Do not print error message if heci_bh_handlerwork was
already on queue.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix setting h_is bit in h_csr register

Host software could issue interrupts to ME firmware, using H_IG bit. While
Setting H_IG bit, host software should preserve all the other bits in H_CSR
unchanged. In the original function which sets H_CSR register, they first read
the register, then set some bits, and write the whole 32bits back to the
register. And that the special behavior of H_IS (write-one-to-zero) causes problem.
This patch fixes the issue in the following ways:

 - Modify heci_set_csr_register() function so that it doesn't change H_IS bit.
 - Add interface heci_csr_clear_his() to clear H_IS bit. This function is called
   after H_IS checking (dev->host_hw_state & H_IS == H_IS).
 - In original heci_csr_disable_interrupts() function, it not only clears H_IE
   bit, sometimes it also clears H_IS bit. This patch separates the two parts.
 - Avoid calling write_heci_register() function to set H_CSR register directly,
   and instead using heci_set_csr_register() function

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix typos and add wait after disconnect

- Fix typo for enum HECI_WRITE.
 - Fix timeout issue. If the time period is greater or equal 15s, it's timeout.
 - Add 10ms wait time after disconnect, to ensure that hardware is ready.
   Otherwise in the next time connection, hardware resource may be busy.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix softirq safe to unsafe spinlock issue

When spinlock is nested, and the outside one is spin_lock_bh, the inner
spinlock should also be spin_lock_bh, otherwise it will bring softirq-safe
to softirq-unsafe lock conversion.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix spinlock order mess of device_lock and read_io_lock

In orginal code, the device_lock and read_io_lock is mess order when nested,
which may bring dead lock. This patch unify the spinlock order of device_lock
and read_io_lock. First acquire device_lock, then read_io_lock.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix wrong order of device_lock and file_lock

When the two locks are nested, the code should always first acquire file_lock,
and then acquire device_lock in order not to generate dead-lock race.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: heci: fix userspace pointer mess

Fix userspace pointer mess.
 - In memcmp(), dest and src pointer should be both in kernel space.
 - Add (void __user *) modification before userspace pointer.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb: copy_to/from_user related fixes

The patch does copy_to/from_user related fixes

*) __copy_from/to_user is enough for user space data buffer checked by access_ok.
*) return -EFAULT if __copy_from/to_user fails.
*) Do not use memcpy to copy from user space.

Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb: Fix a bunch of warnings.

The patch fixes the following warnings.

drivers/staging/rspiusb/rspiusb.c: In function ‘pixel_data’:
drivers/staging/rspiusb/rspiusb.c:267: warning: passing argument 1 of ‘SetPageDirty’ makes
pointer from integer without a cast
drivers/staging/rspiusb/rspiusb.c: In function ‘UnMapUserBuffer’:
drivers/staging/rspiusb/rspiusb.c:500: warning: passing argument 1 of ‘put_page’ makes
pointer from integer without a cast
drivers/staging/rspiusb/rspiusb.c: In function ‘MapUserBuffer’:
drivers/staging/rspiusb/rspiusb.c:662: warning: assignment makes integer from pointer without a cast
drivers/staging/rspiusb/rspiusb.c:670: warning: assignment makes integer from pointer without a cast

Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb: duplicate code in pixis_io

It seems that pixis_io and pixis_io2 should do the same thing.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb.c: break the huge piusb_ioctl function into several ones

This makes the code more readable, makes checkpatch really happy and factorize some code.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb: clean rspiusb code

This first patch makes checkpatch happier

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rspiusb: make driver compile

Convert undefined info() function calls to dev_err, making rspiusb compile

Signed-off-by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: p9auth: prevent some oopses and memory leaks

Before all testcases, do:
mknod /dev/caphash c 253 0
mknod /dev/capuse c 253 1

This patch does the following:

1. caphash write of > CAP_NODE_SIZE bytes overruns node_ptr->data
(test: cat /etc/mime.types > /dev/caphash)
2. make sure we don't dereference a NULL cap_devices[0].head
(test: cat serge@root@abab > /dev/capuse)
3. don't let strlen dereference a NULL target_user etc
(test: echo ab > /dev/capuse)
4. Don't leak a bunch of memory in cap_write().  Note that
   technically node_ptr is not needed for the capuse write case.
   As a result I have a much more extensive patch splitting up
   cap_write(), but I thought a smaller patch that is easier to test
   and verify would be a better start.  To test:
cnt=0
while [ 1 ]; do
echo /etc/mime.types > /dev/capuse
if [ $((cnt%25)) -eq 0 ]; then
head -2 /proc/meminfo
fi
cnt=$((cnt+1))
sleep 0.3
done
   Without this patch, it MemFree steadily drops.  With the patch,
   it does not.

I have *not* tested this driver (with or without these patches)
with factotum or anything - only using the tests described above.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: oslec bug fix

I have just had a bug fix submitted for Oslec which I have applied to
Oslec SVN. The bug can potentially stops the echo canceller adapting
after a few seconds, although it hasn't caused many problems in
practice.

Signed-off-by: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: b3dfg: clean up MODULE_PARM_DESC newline

Remove incorrect MODULE_PARM_DESC newline.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: wis-sony-tuner.c: fix &&/|| error

Fix &&/|| typo

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: Correct use of ! and &

Correct priority problem in the use of ! and &.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ expression E; constant C; @@
- !E & C
+ !(E & C)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: fix build warnings

This fixes some build warnings in the rtl8192su driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add rtl8192SU wireless usb driver

Driver from Realtek for the Realtek RTL8192 USB wifi device

Based on the r8187 driver from Andrea Merello <andreamrl@tiscali.it> and
others.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: fix build warnings

This fixes some build warnings in the cpc-usb driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: fix printk format warnings

Fix this warnings:
cpc-usb_drv.c:478: warning: format '%d' expects type 'int',
but argument 4 has type 'size_t'
cpc-usb_drv.c:1034: warning: format '%d' expects type 'int',
but argument 3 has type 'long unsigned int'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: depends on PROC_FS

Fix this build error when PROC_FS is not enabled:
cpc-usb_drv.c:61:2: error: #error "PROCFS needed"
cpc-usb_drv.c:1159: error: implicit declaration of function 'proc_mkdir'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: Adjust NULL test

Since card must already be non-NULL, it seems that what was intended
was to test the result of kmalloc.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E,E1;
identifier f,fld,fld1;
statement S1,S2;
@@

E->fld = f(...);
... when != E = E1
    when != E->fld1 = E1
if (
-   E
+   E->fld
           == NULL) S1 else S2
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: add TODO file

List what needs to be done to get this driver merged into
the main part of the kernel tree.

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: fix checkpatch warnings in sja2m16c.h

This fixes most of the coding style issues in sja2m16c.h

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: fix up checkpatch errors in cpc-usb_drv.c

This resolves the checkpatch errors in cpc-usb_drv.c

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: add driver to the build

This adds the cpc-usb driver to the kernel build

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: fix some build problems in the driver

It will now build properly on the latest kernel tree.

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add cpc-usb driver to the staging tree

This is a CPC CAN USB driver.

Just some comments:
cpcusb.h and cpc-usb_drv.c: Essential driver source code
sja2m16c_2.c: Helper for converting bitrate timings
cpc.h: Structures and definition needed to communicate with the device

From: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: epl: do not use CLONE_SIGHAND with allow_signal()

Not sure this patch is really needed since kernel_thread() is deprecated
(and checkpatch.pl complains).

But we should not use kernel_thread(CLONE_SIGHAND) if we are going to play
with signals.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: fix Kconfig issues

Wrap all ANDROID config items with a #if to keep from asking if you want
specific Android drivers even if you say N to CONFIG_ANDROID

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: binder: fix up some checkpatch warnings

This cleans up the majority of the checkpatch warnings in the android
binder driver.  All that is left now is a bunch of too-long-line stuff.

Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: ram_console: fix up remaining checkpatch warnings

This cleans up the last of the checkpatch warnings in the android
ram_console driver.

Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: logger: fix up remaining checkpatch warnings

This cleans up the last of the checkpatch warnings in the android logger
driver.

Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: lowmemorykiller: fix up remaining checkpatch warnings

This cleans up the last of the checkpatch warnings in the android
lowmemorykiller driver.

Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: timed_gpio: Separate timed_output class into a separate driver.

Signed-off-by: Mike Lockwood <lockwood@android.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: lowmemorykiller: fix possible android low memory killer NULL pointer

get_mm_rss() atomically dereferences the actual without checking for a
NULL pointer, which is possible since task_lock() is not held.

Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: lowmemorykiller: cleanup android low memory killer

Clean up the code in lowmem_shrink() for the Android low memory killer so
that it follows the kernel coding style.

It's unnecessary to check for p->oomkilladj >= min_adj if the selected
task's oomkilladj score is stored since get_mm_rss() will always be
greater than zero.

Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: lowmemorykiller: Don't count free space unless it meets the specified limit by itself

From: Arve Hjønnevåg <arve@android.com>

This allows processes to be killed when the kernel evict cache pages in
an attempt to get more contiguous free memory.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: San Mehat <san@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: lowmemorykiller: Only iterate over process list when needed.

Use NR_ACTIVE plus NR_INACTIVE as a size estimate for our fake cache
instead the sum of rss. Neither method is accurate.

Also skip the process scan, if the amount of memory available is above
the largest threshold set.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: San Mehat <san@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: uses pci functions, should depend on PCI

This driver uses lots of pci_*() calls, so it should depend on PCI.

drivers/staging/vt6655/device_main.c:3942: error: implicit declaration of function 'pci_dev_driver'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: Integrate drivers/staging/vt6655 into build system.

Integrate drivers/staging/vt6655 into build system.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: use net_device_ops for management functions

vt6655: use net_device_ops for management functions

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: Remove LINUX_VERSION_CODE preprocessor conditionals.

vt6655: Remove LINUX_VERSION_CODE preprocessor conditionals.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: Replace net_device->priv accesses with netdev_priv calls.

vt6655: Replace net_device->priv accesses with netdev_priv calls.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: Build vt6655.ko, not viawget.ko.

As you requested, this series is to be applied on top of patches 1, 2, and 6
(and replaces patches 3, 4, 5, 7, and 8) from the previous series.

Build vt6655.ko, not viawget.ko.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: Drop obsolete fsuid/fsgid accesses.

drivers/staging/vt6655/device_main.c: Drop obsolete fsuid/fsgid accesses.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655 Add includes to drivers/staging/vt6655.

Add includes to drivers/staging/vt6655.  These came from the includes directory
in the upstream source archive.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Add pristine upstream vt6655 driver sources

Add pristine upstream vt6655 driver sources to drivers/staging/vt6655.  These
files were literally copied from the driver directory in the upstream source
archive, available here:

  http://www.viaarena.com/Driver/vt6655_linux_src_v1.19.12_x86.zip

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: fix build warnings

This fixes some build warnings in the rt2870 driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtlxxxx: off by one in AsicSendCommandToMcu() and NDIS_STATUS NICLoadFirmware()

With a postfix increment i/Index is incremented beyond 100/1000 so the
message will be displayed too soon.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: fix for driver RT2860 to be able to connect to WPA2 networks

Hi

patch to change a line in the cmm_wpa.c file for the rt2860 driver so it
can connect to WPA2 networks with TKIP & AES encryption

Signed-off-by: Bryan Stephenson <acreda1234@tiscali.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28[67]0: merge rt28[67]0/sta/*.[ch]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: prepare for rt28[67]0/sta/*.[ch] merge

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28[67]0: merge rt28[67]0/common/*.[ch]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: prepare for rt28[67]0/common/*.[ch] merge

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28[67]0: merge rt28[67]0/*.[ch]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: prepare for rt28[67]0/*.[ch] merge

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt{28,30}70: merge rt{28,30}70/sta/*.[ch]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: prepare for rt{28,30}70/sta/*.[ch] merge

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt{28,30}70: merge rt{28,30}70/common/*.[ch]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: prepare for rt{28,30}70/common/*.[ch] merge

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt{28,30}70: merge rt{28,30}70/*.[ch]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: prepare for rt{28,30}70/*.[ch] merge

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: use empty ASSERT() macro

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: use empty ASSERT() macro

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: use empty ASSERT() macro

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead CONFIG_AP_SUPPORT code

Then remove no longer needed IF_DEV_CONFIG_OPMODE_ON_[AP,STA]() macros.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead CONFIG_AP_SUPPORT code

Then remove no longer needed IF_DEV_CONFIG_OPMODE_ON_[AP,STA]() macros.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead CONFIG_AP_SUPPORT code

Then remove no longer needed IF_DEV_CONFIG_OPMODE_ON_[AP,STA]() macros.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove DOT11_N_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove DOT11_N_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove DOT11_N_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove WPA_SUPPLICANT_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove WPA_SUPPLICANT_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove WPA_SUPPLICANT_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove NATIVE_WPA_SUPPLICANT_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove NATIVE_WPA_SUPPLICANT_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove NATIVE_WPA_SUPPLICANT_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove CONFIG_STA_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove CONFIG_STA_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove CONFIG_STA_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead RT_BIG_ENDIAN code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead RT_BIG_ENDIAN code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead RT_BIG_ENDIAN code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead INF_AMAZON_SE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead INF_AMAZON_SE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead INF_AMAZON_SE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead DOT11N_DRAFT3 code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead DOT11N_DRAFT3 code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead DOT11N_DRAFT3 code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dead LEAP_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove dead LEAP_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove dead LEAP_SUPPORT code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>