Chris Wilson [Tue, 6 Aug 2013 14:03:40 +0000 (15:03 +0100)]
gem_pread_after_blit: Exercise reading back through different cache levels
Imre Deak [Mon, 29 Jul 2013 14:21:21 +0000 (17:21 +0300)]
kms_render: fix gpu-blit for non-32bit bpps
intel_copy_bo assumes a 32bpp bo, whereas we passed it bos with
arbitrary bpp values. This resulted in thrashing GPU memory following the
destination bo.
Fix this by using a blit helper that can handle other bpps too.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Imre Deak [Mon, 29 Jul 2013 14:19:58 +0000 (17:19 +0300)]
lib: export drm_format_to_bpp
Needed by the next patch.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Imre Deak [Mon, 29 Jul 2013 13:43:31 +0000 (16:43 +0300)]
intel_batchbuffer: add support for non-32bit blt copies
Needed by an upcoming patch fixing kms_render's blits for fbs that have
other than 32bpp formats.
Based on the corresponding SNA function.
v2:
- fix random ordering of src, dst parameters (Chris)
- pass pitch in bytes rather than pixels (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Ben Widawsky [Sat, 27 Jul 2013 22:30:41 +0000 (15:30 -0700)]
lib/intel_mmio: Fix the fixed fix (register access)
When I moved code around here:
commit
57bc7631e161a7bdcf7f68e1a46049dcb49c2256
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Thu May 23 11:09:55 2013 -0700
lib/intel_mmio: Fix the fix
I accidently dropped the intel_gen() for the PCI id.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67289
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Daniel Vetter [Thu, 25 Jul 2013 19:51:27 +0000 (21:51 +0200)]
tests/sysfs_edid_timing: use real bash
The lib/drm_lib.sh load path trick doesn't work otherwise. Tsk.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 24 Jul 2013 15:04:35 +0000 (17:04 +0200)]
tests/gem_flink_race: correct thread count
They all race against each another, no worker-slave relationship
like in the other subtest.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 24 Jul 2013 15:01:11 +0000 (17:01 +0200)]
tests/gem_flink_race: fix up scanf format
Oops, failed to git add.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 24 Jul 2013 07:46:57 +0000 (09:46 +0200)]
tests/gem_flink_race: actually make it somewhat useful
- Enable subtest support.
- Add a check for the same flink name in the racing threads, which is
an issue one of my recent patches actually fixes.
- Add the test I've actually wanted to write which races an flink
against gem close (with no open in between). That one does indeed
leak.
- Readd the leak check, but note that this needs a fixed kernel.
Otherwise the leak counter will be utter garbage.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 24 Jul 2013 07:31:40 +0000 (09:31 +0200)]
Revert "tests/gem_flink_race: count leaked objects"
This reverts commit
bd927662fcfb1443c5982fb04cc694f78e1c8d53.
It's bogus.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 24 Jul 2013 06:01:35 +0000 (08:01 +0200)]
tests/gem_flink_race: check for expected flink failure code
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 24 Jul 2013 05:37:45 +0000 (07:37 +0200)]
tests/gem_flink_race: count leaked objects
And fail the test if the leak count is bigger than 0.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 24 Jul 2013 04:55:10 +0000 (06:55 +0200)]
tests/gem_flink_race: kill debug printf
Oops.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 23 Jul 2013 21:14:57 +0000 (23:14 +0200)]
tests: add gem_flink_race
This exercises a race in the flink name descruction of the current drm
gem core. When racing a gem close with a gem open the open can sneak
in and cause the kernel to leak the flink name and its reference.
This results in leaked gem objects that won't get reaped even at drm
file close time. On my 2 core/4 threads snb machine this leaks on the
order of 1k objects per second.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 23 Jul 2013 20:43:30 +0000 (22:43 +0200)]
lib/drmtest: add gem_flink and gem_open
Requires us to rename a few things in the gem_flink test to avoid
variable shadowing.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 23 Jul 2013 19:07:16 +0000 (21:07 +0200)]
tests: sort tests in Makefile.am and .gitignore
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 22 Jul 2013 07:24:43 +0000 (09:24 +0200)]
tests/gem_suspend: exercise fence restore code
This exercise the bug fixed in
commit
94a335dba34ff47cad3d6d0c29b452d43a1be3c8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jul 17 14:51:28 2013 +0200
drm/i915: correctly restore fences with objects attached
For fun I've also added a subtest for the inverse transition.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 19 Jul 2013 17:08:43 +0000 (19:08 +0200)]
lib/drmtest: document interface groups with one-liners
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 11 Jul 2013 16:59:46 +0000 (09:59 -0700)]
tests: Basic tools tester
Requested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Chris Wilson [Sat, 20 Jul 2013 09:20:52 +0000 (10:20 +0100)]
test/gem_pread_after_blit: Make the test a little more stressful
Extend the simply functionality by repeating it under the rude
interrupter and chain together a couple of steps in new test cases.
As a compromise for adding more tests, incorporate the piglit subtest
framework.
Damien Lespiau [Fri, 19 Jul 2013 16:01:55 +0000 (17:01 +0100)]
tests: Source drm_lib.sh instead of having its own INTEL_SIMULATION test
One code path to maintain is always better.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 19 Jul 2013 16:08:57 +0000 (17:08 +0100)]
tests: Allow a shell test to declare it doesn't need to be DRM master
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 19 Jul 2013 14:42:20 +0000 (15:42 +0100)]
lib: Allow users of env_set() to specify a default value
So when the environment value isn't set, one can specify the default
value to return.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 19 Jul 2013 15:08:11 +0000 (16:08 +0100)]
build: Pimp up the configure summary
This helps people compiling i-g-t figuring out what can be optional.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 19 Jul 2013 15:07:18 +0000 (16:07 +0100)]
build: Fix automake 1.13 warnings
warning: deprecated feature: target 'sr' overrides 'sr$(EXEEXT)'
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 19 Jul 2013 15:03:49 +0000 (16:03 +0100)]
build: Fix unbalanced quoting in the python dumper AC_ARG_ENABLE()
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 19 Jul 2013 15:03:29 +0000 (16:03 +0100)]
build: Fix a small typo in configure.ac
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Daniel Vetter [Fri, 19 Jul 2013 16:24:59 +0000 (18:24 +0200)]
lib/drmtest: fix const mismatch warning
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Xiong Zhang [Fri, 19 Jul 2013 10:42:52 +0000 (18:42 +0800)]
tests: add reloc, pread, pwrite slow path subtest
the reloc, pread, pwrite slow path will be prevented by prefault,
these subtests will disable prefault first, then do reloc, pread,
pwrite, finally enable prefault.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Xiong Zhang [Fri, 19 Jul 2013 10:42:51 +0000 (18:42 +0800)]
lib/drmtest: add drmtest_disable/enable_prefault() function
V2: add exit handler to enable prefault (Daniel)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Damien Lespiau [Thu, 18 Jul 2013 11:23:49 +0000 (12:23 +0100)]
tests: Add some tiled tests to the runs on simulation
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Thu, 18 Jul 2013 10:53:55 +0000 (11:53 +0100)]
tests: Instrument gem_seqno_wrap to run in simulation
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Thu, 18 Jul 2013 10:36:56 +0000 (11:36 +0100)]
tests: Instrument gem_lut_handle for simulation
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Mon, 25 Mar 2013 20:06:20 +0000 (20:06 +0000)]
tests: Instrument tests run in simulation to run quickly
We tweak the tests marked as runnable in simulation to run more quickly,
more often then not at the expense of stress testing (which is of an
arguable interest for the initial bring up in simulation). Hopefully the
values chosen still test something, which is not always straightforward.
It does run quickly, the number on an IVB machines are:
$ time sudo IGT_SIMULATION=0 ./piglit-run.py tests/igt.tests foo
[...]
real 2m0.141s
user 0m16.365s
sys 1m33.382s
Vs.
$ time sudo IGT_SIMULATION=1 ./piglit-run.py tests/igt.tests foo
[...]
real 0m0.448s
user 0m0.226s
sys 0m0.183s
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Mon, 29 Apr 2013 17:40:39 +0000 (18:40 +0100)]
tests: Black list tests we don't want to run on simulation
Let's start by a small set of tests, to eventually consider running
more.
The current list should then be:
gem_mmap
gem_pread_after_blit
gem_ring_sync_loop
gem_ctx_basic
gem_pipe_control_store_loop
gem_storedw_loop_render
gem_storedw_loop_blt
gem_storedw_loop_bsd
gem_render_linear_blits
gem_tiled_blits
gem_cpu_reloc
gem_exec_nop
gem_mmap_gtt
v2 add (Daniel Vetter)
gem_exec_bad_domains
gem_exec_faulting_reloc
gem_flink
gem_reg_read
gem_reloc_overflow
gem_tiling_max_stride
prime_*
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Thu, 18 Jul 2013 13:49:46 +0000 (14:49 +0100)]
lib: Remove old dead code intel_batchbuffer_emit_mi_flush()
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Mon, 29 Apr 2013 15:04:52 +0000 (16:04 +0100)]
lib: Introduce drmtest_skip_on_simulation()
This will allow us to explicitely blacklist tests we don't want to run
on simulation.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Mon, 25 Mar 2013 17:25:14 +0000 (17:25 +0000)]
lib: Rename IGT_QUICK to INTEL_SIMULATION
It's more accurate this way as the quick mode is really useful for in
the simulation environment.
v2: Use the INTEL_ prefix to have a chance to share the same environment
variable as piglit OpenGL tests
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Wed, 17 Jul 2013 15:25:29 +0000 (16:25 +0100)]
build: Depend on cairo 1.12.0 for CAIRO_FORMAT_RGB30
We've somewhat recently added RGB30 support to testdisplay, but we need
cairo 1.12.0 for that. Barf early.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Fri, 12 Jul 2013 14:02:04 +0000 (17:02 +0300)]
tools/inter_error_decode: decode for ctl and acthd
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 15 Jul 2013 09:55:09 +0000 (11:55 +0200)]
tests/prime_nv_api: check multiple foreign imports with flink
We want prime to only ever create one native gem object for each
dma-buf it sees. This can e.g. happen if multiple processes import the
same foreign dma-buf, e.g. the application imports a yuv frame from
v4l to encode it into a video stream and the compositor imports it
into his fd again to display it with an overlay.
Hence add a bunch of tests which check all the various orders in which
this could happen. Currently they all fail.
Checking flink names is the easiest (and afaik only) way to check
whether we're indeed dealing with the same object.
This checks both ways, i.e. exporting from i915 and from nouveau, each
with two variants of the test: One reuses the prime fd, the other
closes it and creates a new one.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 15 Jul 2013 09:12:31 +0000 (11:12 +0200)]
test/prime_nv_test: use gem drmtest functions for pread/pwrite
Different argument order, otherwise the same.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 15 Jul 2013 09:09:57 +0000 (11:09 +0200)]
test/prime_nv_test: nicer test names
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 15 Jul 2013 09:04:20 +0000 (11:04 +0200)]
test/prime_nv_api: more descriptive subtest names
Preprocessor magic ftw!
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 15 Jul 2013 08:59:55 +0000 (10:59 +0200)]
tests/prime_nv_api: Drop bogus check from import-twice
It's purely accidental that importing that same bo to different
drm nouveau fds yields the same handle.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 15 Jul 2013 08:51:10 +0000 (10:51 +0200)]
tests/prime_nv_api: convert to subtest infrastructure
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 12 Jul 2013 09:05:34 +0000 (10:05 +0100)]
tests/gem_write_ring_switch: Skip on pre-SNB
The test requires MI commands only introduced with SNB, and so causes
GPU death on gm45 and ilk.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66838
Chris Wilson [Fri, 12 Jul 2013 08:54:55 +0000 (09:54 +0100)]
tests/gem_write_read_ring_switch: Repeat under rude interrupter
Another waiter that will then be subject to being interrupted, so retest
the ring switches with the rude interrupter.
Daniel Vetter [Wed, 10 Jul 2013 13:35:13 +0000 (15:35 +0200)]
tools/quickdump: gitignore generated files
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Jul 2013 13:34:56 +0000 (15:34 +0200)]
tests: actually add gem_write_read_ring_switch
Duh ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Jul 2013 08:35:10 +0000 (10:35 +0200)]
test: add gem_write_read_ring_switch
This is meant to exercise the bug fixed in
https://patchwork.kernel.org/patch/2825192/
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 9 Jul 2013 21:04:20 +0000 (23:04 +0200)]
tools/intel_reg_dumper: fix up END register
I'm full of fail ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 9 Jul 2013 08:46:09 +0000 (10:46 +0200)]
tools/intel_reg_dumper: add gen6+ fences
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 4 Jul 2013 00:11:05 +0000 (01:11 +0100)]
gem_(tiled|linear)_blits: s/interrutible/interruptible/
Spelling fix in "interruptible" subtest name.
Daniel Vetter [Wed, 3 Jul 2013 23:50:55 +0000 (01:50 +0200)]
tests/kms_flip: don't run blocking relateve vblank waits with interrupts
They simply take forever with the current kernel implementation. And
since everyone switched over to the event based interface I don't see
much incentive to try to fix that.
So just disable them.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Wed, 3 Jul 2013 17:42:48 +0000 (14:42 -0300)]
intel_reg_dumper: enable the power well
The intel_reg_dumper tool reads a lot of display registers. If we
don't turn on the power well, dmesg will get flooded with tons of
messages about unclaimed registers. So here we enable the "Debug"
power well register and then restore its state later. It's impossible
to guarantee that other things won't mess with the debug register
between our put and get calls, but at least we're trying our best to
keep things working fine, and it's the debug register anyway.
As far as I know, nothing else uses the Debug register for anything,
so we should be safe for now.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Paulo Zanoni [Wed, 3 Jul 2013 17:13:34 +0000 (14:13 -0300)]
lib: fix WM_DBG register address
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Paulo Zanoni [Tue, 7 May 2013 15:53:52 +0000 (12:53 -0300)]
intel_reg_dumper: add hsw_debug_lp_wm
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Chris Wilson [Wed, 3 Jul 2013 09:02:27 +0000 (10:02 +0100)]
Make the failure message for drm_open_any() more specific
Do not suggest retrying as root if we already are.
Chris Wilson [Wed, 3 Jul 2013 08:58:28 +0000 (09:58 +0100)]
Avoid corrupting the exitcode with a failure to open a quiescent fd
In the atexit handler, we attempt to quiesce the GPU. This involves
opening a fd - which will fail if the test is not being run as root and
will obliterate the test status and pollute the output.
Daniel Vetter [Wed, 3 Jul 2013 06:47:34 +0000 (08:47 +0200)]
tests/gem_linear|tiled_blits: convert to subtests
Finer granularity for nightly runs and regression reporting is always
nice.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 3 Jul 2013 07:10:28 +0000 (08:10 +0100)]
drm_lib.sh: Be more precise in detecting the i915 /sys path
We need to be careful in case other devices grow an error file in the
future. The first step here is just to check the minor that corresponds
with the debugfs path found for the device
Chris Wilson [Wed, 3 Jul 2013 07:00:13 +0000 (08:00 +0100)]
tests/hangman: Be lenient towards a non-existent sysfs error state
As /sys/class/drm/cardX/error is a new interface for 3.11, we need to be
quiet when it does not exist or else we upset the automated tests.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66533
Chris Wilson [Tue, 2 Jul 2013 10:24:57 +0000 (11:24 +0100)]
tests/gem_(linear|tiled)_blits: Repeat whilst being interrupted
Since these two tests exercise a working set larger than aperture, they
require stalls which are prone to being interrupted - so interrupt them
and check that everything still works.
Daniel Vetter [Tue, 2 Jul 2013 07:13:57 +0000 (09:13 +0200)]
tests/drm_lib.sh: Don't die if the sysfs path can't be found
That just means that the sysfs error file isn't there.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 2 Jul 2013 07:09:56 +0000 (09:09 +0200)]
test/drm_lib.sh: Updated sysfs error filename
I've forgotten to bikeshed that part ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Fri, 28 Jun 2013 11:35:41 +0000 (14:35 +0300)]
tests/ZZ_hangman: Test both error_state interfaces
Test both debugfs and sysfs error_state interfaces.
v2: sysfs error_state not mandatory
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Update sysfs file name.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 27 Jun 2013 13:54:43 +0000 (16:54 +0300)]
tests: add i915_sfs_path
To access 'error_state' through sysfs.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 27 Jun 2013 13:54:42 +0000 (16:54 +0300)]
tests: rename debugfs base path to be more specific
In preparation to have sysfs entries used in scripts
rename to more specific name.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 1 Jul 2013 11:24:55 +0000 (12:24 +0100)]
tests/kms_flip: Repeat all of the tests whilst being rudely interrupted
Once upon a time, our modesetting code used to fail if it was
interrupted. So lets make sure that never happens whilst flipping.
Ville Syrjälä [Wed, 26 Jun 2013 17:57:34 +0000 (20:57 +0300)]
quick_dump: Add VLV DPIO registers
Add the names of all VLV DPIO registers.
v2: Use the third element to signal DPIO registers, and split
the code changes to a separate patch
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ville Syrjälä [Wed, 26 Jun 2013 17:57:33 +0000 (20:57 +0300)]
quick_dump: Document the register definition format
Add a small comment about what the elements in the register
tuple mean.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ville Syrjälä [Wed, 26 Jun 2013 17:57:32 +0000 (20:57 +0300)]
quick_dump: Add automagic DPIO register support
Repurpose the (currently unused) third element in the register
definition tuple to indicate the type of the register. 'DPIO'
is the only special register type for now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Daniel Vetter [Sat, 29 Jun 2013 16:31:45 +0000 (18:31 +0200)]
lib/drmtest: set default sighandler for QUIT in the signal process
Otherwise the thing doesn't reliably die when run from the piglit
framework somehow.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Sat, 29 Jun 2013 15:50:49 +0000 (17:50 +0200)]
tests/gem_cpu_concurrent_blit: stop signal helper again
Not doing so totally upsets the piglit igt runner since we leave
a bunch of zombies behind.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 29 Jun 2013 16:17:52 +0000 (17:17 +0100)]
tests/gem_cpu_concurrent_blit: Restore lost intel_copy_bo()
Accidentally replaced the intel_copy_bo() with the set_bo() in the
"overwrite-source" in
4fd34977aff60f58cd955eb9c2d568d5fb824611 when
clearly I wanted to simply add the calls to set_bo() first.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Sat, 29 Jun 2013 16:09:21 +0000 (17:09 +0100)]
tests/gem_cpu_concurrent_blit: Undo debugging hack
Accidentally left in the hack to run the
"overwrite-source-interruptible" for only one loop, used whilst testing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Sat, 29 Jun 2013 16:05:24 +0000 (17:05 +0100)]
test/gem_(cpu|gtt)_concurrent_blit: Move the set_bo() from create to the test
Hiding the initial set_bo() required for the "overwrite-source" tests
lead to a nice bit of hilarity as I missed repeating the initialisation
for the multiple loops of the interruptible version of
"overwrite-source".
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Sat, 29 Jun 2013 15:45:46 +0000 (16:45 +0100)]
tests/gem_(cpu|gtt)_concurrent_blit: Restore the old tests and add the new interruptible as new tests
Daniel preferred to keep the old tests intact lest we accidentally break
them, and to add the new interruptible tests as new subtests.
In the process also make sure the GPU is idle before starting each loop.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Sat, 29 Jun 2013 15:15:38 +0000 (16:15 +0100)]
tests/gem_(cpu|gtt)_concurrent_blit: Enable signals
In order to exercise the bug behind:
commit
22fd5ca947b58901927d100d2b1aa0f1672b3435
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jun 28 16:54:08 2013 +0100
drm/i915: Only clear write-domains after a successful wait-seqno
we need to check for concurrent access with the potential to be
interrupted by a signal. The framework for doing so is already in place,
so just enable it and repeat the tests for longer to give better chance
of being interrupted at just the wrong moment.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Thu, 27 Jun 2013 18:58:57 +0000 (19:58 +0100)]
tests/gem_lut_handle: Quit when we hit ENOSPC
I'd been working under the falsehood that we would always generate an
error for an invalid reloc->target_handle before reserving any object.
However, only the execlist is checked up front for validity before
reservation so ENOSPC is a genuine error condition raised by the test.
Fix it so that we stop reporting that limit as a test failure.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65391
Chris Wilson [Mon, 24 Jun 2013 12:53:44 +0000 (13:53 +0100)]
tests/gem_lut_handle: Simplify creation of broken handles
Limit the broken handles to UINT32_MAX-4096 so that we can be sure that
they do not alias with a valid handle.
References: https://bugs.freedesktop.org/show_bug.cgi?id=65391
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Mon, 24 Jun 2013 11:03:54 +0000 (12:03 +0100)]
tests/kms_flip: Suppress failure from setting mode
We may fail to set a mode if it fails some hidden constraints, such as
bandwidth on the third pipe. This is expected, so skip testing such
modes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66111
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Ben Widawsky [Sun, 23 Jun 2013 23:12:51 +0000 (16:12 -0700)]
m4/ax_python_devel: Update to upstream
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Chris Wilson [Fri, 21 Jun 2013 15:52:53 +0000 (16:52 +0100)]
kms_render: Skip unsupported display configurations
Certain modes may not be supported by certain combinations of pipes.
This is impossible to determine upfront, and we await an atomic
modesetting query operation. In the meantime, if we fail to set a mode,
just skip that test.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66000
Chris Wilson [Wed, 19 Jun 2013 13:19:07 +0000 (14:19 +0100)]
gem_lut_handle: Print some more information upon failure
References: https://bugs.freedesktop.org/show_bug.cgi?id=65391
Jani Nikula [Tue, 4 Jun 2013 12:42:15 +0000 (15:42 +0300)]
quick_dump: vlv mipi dsi register support
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Imre Deak [Fri, 7 Jun 2013 18:29:02 +0000 (21:29 +0300)]
lib: fix drm_fourcc.h include path
Signed-off-by: Imre Deak <imre.deak@intel.com>
Chris Wilson [Fri, 7 Jun 2013 10:44:40 +0000 (11:44 +0100)]
gem_lut_handle: Avoid using a valid handle when testing BROKEN
Damien Lespiau [Thu, 6 Jun 2013 15:52:09 +0000 (16:52 +0100)]
list-workarounds: Some workarounds start with WA, not Wa
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Imre Deak [Thu, 30 May 2013 19:59:59 +0000 (22:59 +0300)]
tests: add kms_render
Add a test going through all connectors/crtcs/modes/formats painting to
a front FB with CPU or painting to a back FB with CPU and blitting it
to the front FB.
Only formats understood by cairo are supported for now.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Imre Deak [Fri, 24 May 2013 14:26:54 +0000 (17:26 +0300)]
lib: refactor kmstest_create_fb
Factor out parts that will be used by an upcoming patch adding
kmstest_create_fb2.
Also call the fb paint functions directly, there is not much
point in passing a function pointer for that.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Imre Deak [Thu, 30 May 2013 21:21:43 +0000 (00:21 +0300)]
lib: add kmstest_get_connector_config
This is used by multiple test cases, so make it shared.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Imre Deak [Wed, 5 Jun 2013 19:11:11 +0000 (22:11 +0300)]
lib: use kmstest_cairo_printf_line in paint_marker
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Imre Deak [Thu, 30 May 2013 12:03:48 +0000 (15:03 +0300)]
lib: add kmstest_cairo_printf_line
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[v3: fix mode printing in paint_output_info() botched by debugging leftover :/ ]
Imre Deak [Thu, 30 May 2013 19:53:53 +0000 (22:53 +0300)]
lib: move connector_type_str and co to drmtest
These are used by multiple test cases, so make them shared.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Rodrigo Vivi [Mon, 13 May 2013 20:54:12 +0000 (17:54 -0300)]
intel_chipset: Adding more reserved PCI IDs for Haswell.
At DDX commit Chris mentioned the tendency we have of finding out more
PCI IDs only when users report. So Let's add all new reserved Haswell IDs.
Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=63701
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Rodrigo Vivi [Mon, 13 May 2013 20:54:11 +0000 (17:54 -0300)]
intel_chipset: Fix Haswell GT3 names.
When publishing first HSW ids we weren't allowed to use "GT3" codname.
But this is the correct codname and Mesa is using it already.
So to avoid people getting confused why in Mesa it is called GT3 and here
it is called GT2_PLUS let's fix this name in a standard and correct way.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Chris Wilson [Wed, 5 Jun 2013 10:10:04 +0000 (11:10 +0100)]
gem_lut_handle: Make the error checking explicit for LUT handling
What this test is interested in is the handling of the LUT for very
large arrays, irrespective of whether such batch are actually
executable. So adjust the pass/fail checks to be explicit in the error
they are looking for, so that we do not conflate memory/aperture
pressure as a failure in the LUT API.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65391
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Thu, 30 May 2013 07:37:48 +0000 (08:37 +0100)]
gem_reg_read: Only check errno after a definite error
As upon success, errno is invalid and may give spurious false results.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65157
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>