Ivan Mironov [Sun, 23 Dec 2018 07:41:58 +0000 (12:41 +0500)]
scsi: sd: Fix cache_type_store()
commit
44759979a49bfd2d20d789add7fa81a21eb1a4ab upstream.
Changing of caching mode via /sys/devices/.../scsi_disk/.../cache_type may
fail if device responds to MODE SENSE command with DPOFUA flag set, and
then checks this flag to be not set on MODE SELECT command.
In this scenario, when trying to change cache_type, write always fails:
# echo "none" >cache_type
bash: echo: write error: Invalid argument
And following appears in dmesg:
[13007.865745] sd 1:0:1:0: [sda] Sense Key : Illegal Request [current]
[13007.865753] sd 1:0:1:0: [sda] Add. Sense: Invalid field in parameter list
From SBC-4 r15, 6.5.1 "Mode pages overview", description of DEVICE-SPECIFIC
PARAMETER field in the mode parameter header:
...
The write protect (WP) bit for mode data sent with a MODE SELECT
command shall be ignored by the device server.
...
The DPOFUA bit is reserved for mode data sent with a MODE SELECT
command.
...
The remaining bits in the DEVICE-SPECIFIC PARAMETER byte are also reserved
and shall be set to zero.
[mkp: shuffled commentary to commit description]
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stanley Chu [Thu, 3 Jan 2019 14:08:05 +0000 (22:08 +0800)]
scsi: core: Synchronize request queue PM status only on successful resume
commit
3f7e62bba0003f9c68f599f5997c4647ef5b4f4e upstream.
The commit
356fd2663cff ("scsi: Set request queue runtime PM status back to
active on resume") fixed up the inconsistent RPM status between request
queue and device. However changing request queue RPM status shall be done
only on successful resume, otherwise status may be still inconsistent as
below,
Request queue: RPM_ACTIVE
Device: RPM_SUSPENDED
This ends up soft lockup because requests can be submitted to underlying
devices but those devices and their required resource are not resumed.
For example,
After above inconsistent status happens, IO request can be submitted to UFS
device driver but required resource (like clock) is not resumed yet thus
lead to warning as below call stack,
WARN_ON(hba->clk_gating.state != CLKS_ON);
ufshcd_queuecommand
scsi_dispatch_cmd
scsi_request_fn
__blk_run_queue
cfq_insert_request
__elv_add_request
blk_flush_plug_list
blk_finish_plug
jbd2_journal_commit_transaction
kjournald2
We may see all behind IO requests hang because of no response from storage
host or device and then soft lockup happens in system. In the end, system
may crash in many ways.
Fixes:
356fd2663cff (scsi: Set request queue runtime PM status back to active on resume)
Cc: stable@vger.kernel.org
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Wed, 16 Jan 2019 18:31:09 +0000 (10:31 -0800)]
Yama: Check for pid death before checking ancestry
commit
9474f4e7cd71a633fa1ef93b7daefd44bbdfd482 upstream.
It's possible that a pid has died before we take the rcu lock, in which
case we can't walk the ancestry list as it may be detached. Instead, check
for death first before doing the walk.
Reported-by: syzbot+a9ac39bf55329e206219@syzkaller.appspotmail.com
Fixes:
2d514487faf1 ("security: Yama LSM")
Cc: stable@vger.kernel.org
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Wed, 21 Nov 2018 19:05:45 +0000 (14:05 -0500)]
btrfs: wait on ordered extents on abort cleanup
commit
74d5d229b1bf60f93bff244b2dfc0eb21ec32a07 upstream.
If we flip read-only before we initiate writeback on all dirty pages for
ordered extents we've created then we'll have ordered extents left over
on umount, which results in all sorts of bad things happening. Fix this
by making sure we wait on ordered extents if we have to do the aborted
transaction cleanup stuff.
generic/475 can produce this warning:
[ 8531.177332] WARNING: CPU: 2 PID: 11997 at fs/btrfs/disk-io.c:3856 btrfs_free_fs_root+0x95/0xa0 [btrfs]
[ 8531.183282] CPU: 2 PID: 11997 Comm: umount Tainted: G W 5.0.0-rc1-default+ #394
[ 8531.185164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014
[ 8531.187851] RIP: 0010:btrfs_free_fs_root+0x95/0xa0 [btrfs]
[ 8531.193082] RSP: 0018:
ffffb1ab86163d98 EFLAGS:
00010286
[ 8531.194198] RAX:
ffff9f3449494d18 RBX:
ffff9f34a2695000 RCX:
0000000000000000
[ 8531.195629] RDX:
0000000000000002 RSI:
0000000000000001 RDI:
0000000000000000
[ 8531.197315] RBP:
ffff9f344e930000 R08:
0000000000000001 R09:
0000000000000000
[ 8531.199095] R10:
0000000000000000 R11:
ffff9f34494d4ff8 R12:
ffffb1ab86163dc0
[ 8531.200870] R13:
ffff9f344e9300b0 R14:
ffffb1ab86163db8 R15:
0000000000000000
[ 8531.202707] FS:
00007fc68e949fc0(0000) GS:
ffff9f34bd800000(0000)knlGS:
0000000000000000
[ 8531.204851] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8531.205942] CR2:
00007ffde8114dd8 CR3:
000000002dfbd000 CR4:
00000000000006e0
[ 8531.207516] Call Trace:
[ 8531.208175] btrfs_free_fs_roots+0xdb/0x170 [btrfs]
[ 8531.210209] ? wait_for_completion+0x5b/0x190
[ 8531.211303] close_ctree+0x157/0x350 [btrfs]
[ 8531.212412] generic_shutdown_super+0x64/0x100
[ 8531.213485] kill_anon_super+0x14/0x30
[ 8531.214430] btrfs_kill_super+0x12/0xa0 [btrfs]
[ 8531.215539] deactivate_locked_super+0x29/0x60
[ 8531.216633] cleanup_mnt+0x3b/0x70
[ 8531.217497] task_work_run+0x98/0xc0
[ 8531.218397] exit_to_usermode_loop+0x83/0x90
[ 8531.219324] do_syscall_64+0x15b/0x180
[ 8531.220192] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 8531.221286] RIP: 0033:0x7fc68e5e4d07
[ 8531.225621] RSP: 002b:
00007ffde8116608 EFLAGS:
00000246 ORIG_RAX:
00000000000000a6
[ 8531.227512] RAX:
0000000000000000 RBX:
00005580c2175970 RCX:
00007fc68e5e4d07
[ 8531.229098] RDX:
0000000000000001 RSI:
0000000000000000 RDI:
00005580c2175b80
[ 8531.230730] RBP:
0000000000000000 R08:
00005580c2175ba0 R09:
00007ffde8114e80
[ 8531.232269] R10:
0000000000000000 R11:
0000000000000246 R12:
00005580c2175b80
[ 8531.233839] R13:
00007fc68eac61c4 R14:
00005580c2175a68 R15:
0000000000000000
Leaving a tree in the rb-tree:
3853 void btrfs_free_fs_root(struct btrfs_root *root)
3854 {
3855 iput(root->ino_cache_inode);
3856 WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree));
CC: stable@vger.kernel.org
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add stacktrace ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Sterba [Wed, 9 Jan 2019 14:02:23 +0000 (15:02 +0100)]
Revert "btrfs: balance dirty metadata pages in btrfs_finish_ordered_io"
commit
77b7aad195099e7c6da11e94b7fa6ef5e6fb0025 upstream.
This reverts commit
e73e81b6d0114d4a303205a952ab2e87c44bd279.
This patch causes a few problems:
- adds latency to btrfs_finish_ordered_io
- as btrfs_finish_ordered_io is used for free space cache, generating
more work from btrfs_btree_balance_dirty_nodelay could end up in the
same workque, effectively deadlocking
12260 kworker/u96:16+btrfs-freespace-write D
[<0>] balance_dirty_pages+0x6e6/0x7ad
[<0>] balance_dirty_pages_ratelimited+0x6bb/0xa90
[<0>] btrfs_finish_ordered_io+0x3da/0x770
[<0>] normal_work_helper+0x1c5/0x5a0
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x46/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
Transaction commit will wait on the freespace cache:
838 btrfs-transacti D
[<0>] btrfs_start_ordered_extent+0x154/0x1e0
[<0>] btrfs_wait_ordered_range+0xbd/0x110
[<0>] __btrfs_wait_cache_io+0x49/0x1a0
[<0>] btrfs_write_dirty_block_groups+0x10b/0x3b0
[<0>] commit_cowonly_roots+0x215/0x2b0
[<0>] btrfs_commit_transaction+0x37e/0x910
[<0>] transaction_kthread+0x14d/0x180
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
And then writepages ends up waiting on transaction commit:
9520 kworker/u96:13+flush-btrfs-1 D
[<0>] wait_current_trans+0xac/0xe0
[<0>] start_transaction+0x21b/0x4b0
[<0>] cow_file_range_inline+0x10b/0x6b0
[<0>] cow_file_range.isra.69+0x329/0x4a0
[<0>] run_delalloc_range+0x105/0x3c0
[<0>] writepage_delalloc+0x119/0x180
[<0>] __extent_writepage+0x10c/0x390
[<0>] extent_write_cache_pages+0x26f/0x3d0
[<0>] extent_writepages+0x4f/0x80
[<0>] do_writepages+0x17/0x60
[<0>] __writeback_single_inode+0x59/0x690
[<0>] writeback_sb_inodes+0x291/0x4e0
[<0>] __writeback_inodes_wb+0x87/0xb0
[<0>] wb_writeback+0x3bb/0x500
[<0>] wb_workfn+0x40d/0x610
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x1e0/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
Eventually, we have every process in the system waiting on
balance_dirty_pages(), and nobody is able to make progress on page
writeback.
The original patch tried to fix an OOM condition, that happened on 4.4 but no
success reproducing that on later kernels (4.19 and 4.20). This is more likely
a problem in OOM itself.
Link: https://lore.kernel.org/linux-btrfs/20180528054821.9092-1-ethanlien@synology.com/
Reported-by: Chris Mason <clm@fb.com>
CC: stable@vger.kernel.org # 4.18+
CC: ethanlien <ethanlien@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 17 Dec 2018 07:23:22 +0000 (23:23 -0800)]
crypto: authenc - fix parsing key with misaligned rta_len
commit
8f9c469348487844328e162db57112f7d347c49f upstream.
Keys for "authenc" AEADs are formatted as an rtattr containing a 4-byte
'enckeylen', followed by an authentication key and an encryption key.
crypto_authenc_extractkeys() parses the key to find the inner keys.
However, it fails to consider the case where the rtattr's payload is
longer than 4 bytes but not 4-byte aligned, and where the key ends
before the next 4-byte aligned boundary. In this case, 'keylen -=
RTA_ALIGN(rta->rta_len);' underflows to a value near UINT_MAX. This
causes a buffer overread and crash during crypto_ahash_setkey().
Fix it by restricting the rtattr payload to the expected size.
Reproducer using AF_ALG:
#include <linux/if_alg.h>
#include <linux/rtnetlink.h>
#include <sys/socket.h>
int main()
{
int fd;
struct sockaddr_alg addr = {
.salg_type = "aead",
.salg_name = "authenc(hmac(sha256),cbc(aes))",
};
struct {
struct rtattr attr;
__be32 enckeylen;
char keys[1];
} __attribute__((packed)) key = {
.attr.rta_len = sizeof(key),
.attr.rta_type = 1 /* CRYPTO_AUTHENC_KEYA_PARAM */,
};
fd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(fd, (void *)&addr, sizeof(addr));
setsockopt(fd, SOL_ALG, ALG_SET_KEY, &key, sizeof(key));
}
It caused:
BUG: unable to handle kernel paging request at
ffff88007ffdc000
PGD 2e01067 P4D 2e01067 PUD 2e04067 PMD 2e05067 PTE 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 883 Comm: authenc Not tainted 4.20.0-rc1-00108-g00c9fe37a7f27 #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
RIP: 0010:sha256_ni_transform+0xb3/0x330 arch/x86/crypto/sha256_ni_asm.S:155
[...]
Call Trace:
sha256_ni_finup+0x10/0x20 arch/x86/crypto/sha256_ssse3_glue.c:321
crypto_shash_finup+0x1a/0x30 crypto/shash.c:178
shash_digest_unaligned+0x45/0x60 crypto/shash.c:186
crypto_shash_digest+0x24/0x40 crypto/shash.c:202
hmac_setkey+0x135/0x1e0 crypto/hmac.c:66
crypto_shash_setkey+0x2b/0xb0 crypto/shash.c:66
shash_async_setkey+0x10/0x20 crypto/shash.c:223
crypto_ahash_setkey+0x2d/0xa0 crypto/ahash.c:202
crypto_authenc_setkey+0x68/0x100 crypto/authenc.c:96
crypto_aead_setkey+0x2a/0xc0 crypto/aead.c:62
aead_setkey+0xc/0x10 crypto/algif_aead.c:526
alg_setkey crypto/af_alg.c:223 [inline]
alg_setsockopt+0xfe/0x130 crypto/af_alg.c:256
__sys_setsockopt+0x6d/0xd0 net/socket.c:1902
__do_sys_setsockopt net/socket.c:1913 [inline]
__se_sys_setsockopt net/socket.c:1910 [inline]
__x64_sys_setsockopt+0x1f/0x30 net/socket.c:1910
do_syscall_64+0x4a/0x180 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes:
e236d4a89a2f ("[CRYPTO] authenc: Move enckeylen into key itself")
Cc: <stable@vger.kernel.org> # v2.6.25+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 17 Dec 2018 07:23:23 +0000 (23:23 -0800)]
crypto: bcm - convert to use crypto_authenc_extractkeys()
commit
ab57b33525c3221afaebd391458fa0cbcd56903d upstream.
Convert the bcm crypto driver to use crypto_authenc_extractkeys() so
that it picks up the fix for broken validation of rtattr::rta_len.
This also fixes the DES weak key check to actually be done on the right
key. (It was checking the authentication key, not the encryption key...)
Fixes:
9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harsh Jain [Thu, 3 Jan 2019 08:51:05 +0000 (14:21 +0530)]
crypto: authencesn - Avoid twice completion call in decrypt path
commit
a7773363624b034ab198c738661253d20a8055c2 upstream.
Authencesn template in decrypt path unconditionally calls aead_request_complete
after ahash_verify which leads to following kernel panic in after decryption.
[ 338.539800] BUG: unable to handle kernel NULL pointer dereference at
0000000000000004
[ 338.548372] PGD 0 P4D 0
[ 338.551157] Oops: 0000 [#1] SMP PTI
[ 338.554919] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Tainted: G W I 4.19.7+ #13
[ 338.564431] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10
[ 338.572212] RIP: 0010:esp_input_done2+0x350/0x410 [esp4]
[ 338.578030] Code: ff 0f b6 68 10 48 8b 83 c8 00 00 00 e9 8e fe ff ff 8b 04 25 04 00 00 00 83 e8 01 48 98 48 8b 3c c5 10 00 00 00 e9 f7 fd ff ff <8b> 04 25 04 00 00 00 83 e8 01 48 98 4c 8b 24 c5 10 00 00 00 e9 3b
[ 338.598547] RSP: 0018:
ffff911c97803c00 EFLAGS:
00010246
[ 338.604268] RAX:
0000000000000002 RBX:
ffff911c4469ee00 RCX:
0000000000000000
[ 338.612090] RDX:
0000000000000000 RSI:
0000000000000130 RDI:
ffff911b87c20400
[ 338.619874] RBP:
0000000000000000 R08:
ffff911b87c20498 R09:
000000000000000a
[ 338.627610] R10:
0000000000000001 R11:
0000000000000004 R12:
0000000000000000
[ 338.635402] R13:
ffff911c89590000 R14:
ffff911c91730000 R15:
0000000000000000
[ 338.643234] FS:
0000000000000000(0000) GS:
ffff911c97800000(0000) knlGS:
0000000000000000
[ 338.652047] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 338.658299] CR2:
0000000000000004 CR3:
00000001ec20a000 CR4:
00000000000006f0
[ 338.666382] Call Trace:
[ 338.669051] <IRQ>
[ 338.671254] esp_input_done+0x12/0x20 [esp4]
[ 338.675922] chcr_handle_resp+0x3b5/0x790 [chcr]
[ 338.680949] cpl_fw6_pld_handler+0x37/0x60 [chcr]
[ 338.686080] chcr_uld_rx_handler+0x22/0x50 [chcr]
[ 338.691233] uldrx_handler+0x8c/0xc0 [cxgb4]
[ 338.695923] process_responses+0x2f0/0x5d0 [cxgb4]
[ 338.701177] ? bitmap_find_next_zero_area_off+0x3a/0x90
[ 338.706882] ? matrix_alloc_area.constprop.7+0x60/0x90
[ 338.712517] ? apic_update_irq_cfg+0x82/0xf0
[ 338.717177] napi_rx_handler+0x14/0xe0 [cxgb4]
[ 338.722015] net_rx_action+0x2aa/0x3e0
[ 338.726136] __do_softirq+0xcb/0x280
[ 338.730054] irq_exit+0xde/0xf0
[ 338.733504] do_IRQ+0x54/0xd0
[ 338.736745] common_interrupt+0xf/0xf
Fixes:
104880a6b470 ("crypto: authencesn - Convert to new AEAD...")
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aymen Sghaier [Wed, 19 Dec 2018 14:36:44 +0000 (16:36 +0200)]
crypto: caam - fix zero-length buffer DMA mapping
commit
04e6d25c5bb244c1a37eb9fe0b604cc11a04e8c5 upstream.
Recent changes - probably DMA API related (generic and/or arm64-specific) -
exposed a case where driver maps a zero-length buffer:
ahash_init()->ahash_update()->ahash_final() with a zero-length string to
hash
kernel BUG at kernel/dma/swiotlb.c:475!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 1823 Comm: cryptomgr_test Not tainted 4.20.0-rc1-00108-g00c9fe37a7f2 #1
Hardware name: LS1046A RDB Board (DT)
pstate:
80000005 (Nzcv daif -PAN -UAO)
pc : swiotlb_tbl_map_single+0x170/0x2b8
lr : swiotlb_map_page+0x134/0x1f8
sp :
ffff00000f79b8f0
x29:
ffff00000f79b8f0 x28:
0000000000000000
x27:
ffff0000093d0000 x26:
0000000000000000
x25:
00000000001f3ffe x24:
0000000000200000
x23:
0000000000000000 x22:
00000009f2c538c0
x21:
ffff800970aeb410 x20:
0000000000000001
x19:
ffff800970aeb410 x18:
0000000000000007
x17:
000000000000000e x16:
0000000000000001
x15:
0000000000000019 x14:
c32cb8218a167fe8
x13:
ffffffff00000000 x12:
ffff80097fdae348
x11:
0000800976bca000 x10:
0000000000000010
x9 :
0000000000000000 x8 :
ffff0000091fd6c8
x7 :
0000000000000000 x6 :
00000009f2c538bf
x5 :
0000000000000000 x4 :
0000000000000001
x3 :
0000000000000000 x2 :
00000009f2c538c0
x1 :
00000000f9fff000 x0 :
0000000000000000
Process cryptomgr_test (pid: 1823, stack limit = 0x(____ptrval____))
Call trace:
swiotlb_tbl_map_single+0x170/0x2b8
swiotlb_map_page+0x134/0x1f8
ahash_final_no_ctx+0xc4/0x6cc
ahash_final+0x10/0x18
crypto_ahash_op+0x30/0x84
crypto_ahash_final+0x14/0x1c
__test_hash+0x574/0xe0c
test_hash+0x28/0x80
__alg_test_hash+0x84/0xd0
alg_test_hash+0x78/0x144
alg_test.part.30+0x12c/0x2b4
alg_test+0x3c/0x68
cryptomgr_test+0x44/0x4c
kthread+0xfc/0x128
ret_from_fork+0x10/0x18
Code:
d34bfc18 2a1a03f7 1a9f8694 35fff89a (
d4210000)
Cc: <stable@vger.kernel.org>
Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willem de Bruijn [Mon, 7 Jan 2019 21:47:33 +0000 (16:47 -0500)]
ip: on queued skb use skb_header_pointer instead of pskb_may_pull
[ Upstream commit
4a06fa67c4da20148803525151845276cdb995c1 ]
Commit
2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call
pskb_may_pull") avoided a read beyond the end of the skb linear
segment by calling pskb_may_pull.
That function can trigger a BUG_ON in pskb_expand_head if the skb is
shared, which it is when when peeking. It can also return ENOMEM.
Avoid both by switching to safer skb_header_pointer.
Fixes:
2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willem de Bruijn [Tue, 8 Jan 2019 17:32:42 +0000 (12:32 -0500)]
bonding: update nest level on unlink
[ Upstream commit
001e465f09a18857443489a57e74314a3368c805 ]
A network device stack with multiple layers of bonding devices can
trigger a false positive lockdep warning. Adding lockdep nest levels
fixes this. Update the level on both enslave and unlink, to avoid the
following series of events ..
ip netns add test
ip netns exec test bash
ip link set dev lo addr 00:11:22:33:44:55
ip link set dev lo down
ip link add dev bond1 type bond
ip link add dev bond2 type bond
ip link set dev lo master bond1
ip link set dev bond1 master bond2
ip link set dev bond1 nomaster
ip link set dev bond2 master bond1
.. from still generating a splat:
[ 193.652127] ======================================================
[ 193.658231] WARNING: possible circular locking dependency detected
[ 193.664350] 4.20.0 #8 Not tainted
[ 193.668310] ------------------------------------------------------
[ 193.674417] ip/15577 is trying to acquire lock:
[ 193.678897]
00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290
[ 193.687851]
but task is already holding lock:
[ 193.693625]
00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290
[..]
[ 193.851092] lock_acquire+0xa7/0x190
[ 193.855138] _raw_spin_lock_nested+0x2d/0x40
[ 193.859878] bond_get_stats+0x58/0x290
[ 193.864093] dev_get_stats+0x5a/0xc0
[ 193.868140] bond_get_stats+0x105/0x290
[ 193.872444] dev_get_stats+0x5a/0xc0
[ 193.876493] rtnl_fill_stats+0x40/0x130
[ 193.880797] rtnl_fill_ifinfo+0x6c5/0xdc0
[ 193.885271] rtmsg_ifinfo_build_skb+0x86/0xe0
[ 193.890091] rtnetlink_event+0x5b/0xa0
[ 193.894320] raw_notifier_call_chain+0x43/0x60
[ 193.899225] netdev_change_features+0x50/0xa0
[ 193.904044] bond_compute_features.isra.46+0x1ab/0x270
[ 193.909640] bond_enslave+0x141d/0x15b0
[ 193.913946] do_set_master+0x89/0xa0
[ 193.918016] do_setlink+0x37c/0xda0
[ 193.921980] __rtnl_newlink+0x499/0x890
[ 193.926281] rtnl_newlink+0x48/0x70
[ 193.930238] rtnetlink_rcv_msg+0x171/0x4b0
[ 193.934801] netlink_rcv_skb+0xd1/0x110
[ 193.939103] rtnetlink_rcv+0x15/0x20
[ 193.943151] netlink_unicast+0x3b5/0x520
[ 193.947544] netlink_sendmsg+0x2fd/0x3f0
[ 193.951942] sock_sendmsg+0x38/0x50
[ 193.955899] ___sys_sendmsg+0x2ba/0x2d0
[ 193.960205] __x64_sys_sendmsg+0xad/0x100
[ 193.964687] do_syscall_64+0x5a/0x460
[ 193.968823] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes:
7e2556e40026 ("bonding: avoid lockdep confusion in bond_get_stats()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Gunthorpe [Tue, 8 Jan 2019 23:27:06 +0000 (23:27 +0000)]
packet: Do not leak dev refcounts on error exit
[ Upstream commit
d972f3dce8d161e2142da0ab1ef25df00e2f21a9 ]
'dev' is non NULL when the addr_len check triggers so it must goto a label
that does the dev_put otherwise dev will have a leaked refcount.
This bug causes the ib_ipoib module to become unloadable when using
systemd-network as it triggers this check on InfiniBand links.
Fixes:
99137b7888f4 ("packet: validate address length")
Reported-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JianJhen Chen [Sun, 6 Jan 2019 03:28:13 +0000 (11:28 +0800)]
net: bridge: fix a bug on using a neighbour cache entry without checking its state
[ Upstream commit
4c84edc11b76590859b1e45dd676074c59602dc4 ]
When handling DNAT'ed packets on a bridge device, the neighbour cache entry
from lookup was used without checking its state. It means that a cache entry
in the NUD_STALE state will be used directly instead of entering the NUD_DELAY
state to confirm the reachability of the neighbor.
This problem becomes worse after commit
2724680bceee ("neigh: Keep neighbour
cache entries if number of them is small enough."), since all neighbour cache
entries in the NUD_STALE state will be kept in the neighbour table as long as
the number of cache entries does not exceed the value specified in gc_thresh1.
This commit validates the state of a neighbour cache entry before using
the entry.
Signed-off-by: JianJhen Chen <kchen@synology.com>
Reviewed-by: JinLin Chen <jlchen@synology.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 8 Jan 2019 12:06:14 +0000 (04:06 -0800)]
ipv6: fix kernel-infoleak in ipv6_local_error()
[ Upstream commit
7d033c9f6a7fd3821af75620a0257db87c2b552a ]
This patch makes sure the flow label in the IPv6 header
forged in ipv6_local_error() is initialized.
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 1 PID: 24675 Comm: syz-executor1 Not tainted 4.20.0-rc7+ #4
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
kmsan_internal_check_memory+0x455/0xb00 mm/kmsan/kmsan.c:675
kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
_copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
copy_to_user include/linux/uaccess.h:177 [inline]
move_addr_to_user+0x2e9/0x4f0 net/socket.c:227
___sys_recvmsg+0x5d7/0x1140 net/socket.c:2284
__sys_recvmsg net/socket.c:2327 [inline]
__do_sys_recvmsg net/socket.c:2337 [inline]
__se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
__x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x457ec9
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f8750c06c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002f
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000457ec9
RDX:
0000000000002000 RSI:
0000000020000400 RDI:
0000000000000005
RBP:
000000000073bf00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f8750c076d4
R13:
00000000004c4a60 R14:
00000000004d8140 R15:
00000000ffffffff
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:219 [inline]
kmsan_internal_chain_origin+0x134/0x230 mm/kmsan/kmsan.c:439
__msan_chain_origin+0x70/0xe0 mm/kmsan/kmsan_instr.c:200
ipv6_recv_error+0x1e3f/0x1eb0 net/ipv6/datagram.c:475
udpv6_recvmsg+0x398/0x2ab0 net/ipv6/udp.c:335
inet_recvmsg+0x4fb/0x600 net/ipv4/af_inet.c:830
sock_recvmsg_nosec net/socket.c:794 [inline]
sock_recvmsg+0x1d1/0x230 net/socket.c:801
___sys_recvmsg+0x4d5/0x1140 net/socket.c:2278
__sys_recvmsg net/socket.c:2327 [inline]
__do_sys_recvmsg net/socket.c:2337 [inline]
__se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
__x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158
kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2759 [inline]
__kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383
__kmalloc_reserve net/core/skbuff.c:137 [inline]
__alloc_skb+0x309/0xa20 net/core/skbuff.c:205
alloc_skb include/linux/skbuff.h:998 [inline]
ipv6_local_error+0x1a7/0x9e0 net/ipv6/datagram.c:334
__ip6_append_data+0x129f/0x4fd0 net/ipv6/ip6_output.c:1311
ip6_make_skb+0x6cc/0xcf0 net/ipv6/ip6_output.c:1775
udpv6_sendmsg+0x3f8e/0x45d0 net/ipv6/udp.c:1384
inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
__sys_sendto+0x8c4/0xac0 net/socket.c:1788
__do_sys_sendto net/socket.c:1800 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:1796
__x64_sys_sendto+0x6e/0x90 net/socket.c:1796
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Bytes 4-7 of 28 are uninitialized
Memory access of size 28 starts at
ffff8881937bfce0
Data copied to user address
0000000020000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Fri, 18 Jan 2019 17:56:33 +0000 (17:56 +0000)]
arm64: Don't trap host pointer auth use to EL2
[ Backport of upstream commit
b3669b1e1c09890d61109a1a8ece2c5b66804714 ]
To allow EL0 (and/or EL1) to use pointer authentication functionality,
we must ensure that pointer authentication instructions and accesses to
pointer authentication keys are not trapped to EL2.
This patch ensures that HCR_EL2 is configured appropriately when the
kernel is booted at EL2. For non-VHE kernels we set HCR_EL2.{API,APK},
ensuring that EL1 can access keys and permit EL0 use of instructions.
For VHE kernels host EL0 (TGE && E2H) is unaffected by these settings,
and it doesn't matter how we configure HCR_EL2.{API,APK}, so we don't
bother setting them.
This does not enable support for KVM guests, since KVM manages HCR_EL2
itself when running VMs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Will Deacon <will.deacon@arm.com>
[kristina: backport to 4.14.y: adjust context]
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Rutland [Fri, 18 Jan 2019 17:56:32 +0000 (17:56 +0000)]
arm64/kvm: consistently handle host HCR_EL2 flags
[ Backport of upstream commit
4eaed6aa2c628101246bcabc91b203bfac1193f8 ]
In KVM we define the configuration of HCR_EL2 for a VHE HOST in
HCR_HOST_VHE_FLAGS, but we don't have a similar definition for the
non-VHE host flags, and open-code HCR_RW. Further, in head.S we
open-code the flags for VHE and non-VHE configurations.
In future, we're going to want to configure more flags for the host, so
lets add a HCR_HOST_NVHE_FLAGS defintion, and consistently use both
HCR_HOST_VHE_FLAGS and HCR_HOST_NVHE_FLAGS in the kvm code and head.S.
We now use mov_q to generate the HCR_EL2 value, as we use when
configuring other registers in head.S.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Will Deacon <will.deacon@arm.com>
[kristina: backport to 4.14.y: adjust context]
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varun Prakash [Fri, 9 Nov 2018 15:29:01 +0000 (20:59 +0530)]
scsi: target: iscsi: cxgbit: fix csk leak
[ Upstream commit
ed076c55b359cc9982ca8b065bcc01675f7365f6 ]
In case of arp failure call cxgbit_put_csk() to free csk.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Levin [Mon, 14 Jan 2019 15:01:30 +0000 (10:01 -0500)]
Revert "scsi: target: iscsi: cxgbit: fix csk leak"
This reverts commit
b831528038e3cad0d745c53bcaeedb642f5cbc1f.
A wrong commit message was used for the stable commit because of a human
error (and duplicate commit subject lines).
This patch reverts this error, and the following patches add the two
upstream commits.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xunlei Pang [Wed, 20 Jun 2018 10:18:33 +0000 (18:18 +0800)]
sched/fair: Fix bandwidth timer clock drift condition
commit
512ac999d2755d2b7109e996a76b6fb8b888631d upstream.
I noticed that cgroup task groups constantly get throttled even
if they have low CPU usage, this causes some jitters on the response
time to some of our business containers when enabling CPU quotas.
It's very simple to reproduce:
mkdir /sys/fs/cgroup/cpu/test
cd /sys/fs/cgroup/cpu/test
echo 100000 > cpu.cfs_quota_us
echo $$ > tasks
then repeat:
cat cpu.stat | grep nr_throttled # nr_throttled will increase steadily
After some analysis, we found that cfs_rq::runtime_remaining will
be cleared by expire_cfs_rq_runtime() due to two equal but stale
"cfs_{b|q}->runtime_expires" after period timer is re-armed.
The current condition to judge clock drift in expire_cfs_rq_runtime()
is wrong, the two runtime_expires are actually the same when clock
drift happens, so this condtion can never hit. The orginal design was
correctly done by this commit:
a9cf55b28610 ("sched: Expire invalid runtime")
... but was changed to be the current implementation due to its locking bug.
This patch introduces another way, it adds a new field in both structures
cfs_rq and cfs_bandwidth to record the expiration update sequence, and
uses them to figure out if clock drift happens (true if they are equal).
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[alakeshh: backport: Fixed merge conflicts:
- sched.h: Fix the indentation and order in which the variables are
declared to match with coding style of the existing code in 4.14
Struct members of same type were declared in separate lines in
upstream patch which has been changed back to having multiple
members of same type in the same line.
e.g. int a; int b; -> int a, b; ]
Signed-off-by: Alakesh Haloi <alakeshh@amazon.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org> # 4.14.x
Fixes:
51f2176d74ac ("sched/fair: Fix unlocked reads of some cfs_b->quota/period")
Link: http://lkml.kernel.org/r/20180620101834.24455-1-xlpang@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Thu, 17 Jan 2019 00:25:58 +0000 (00:25 +0000)]
media: em28xx: Fix misplaced reset of dev->v4l::field_count
The backport of commit
afeaade90db4 "media: em28xx: make
v4l2-compliance happier by starting sequence on zero" added a
reset on em28xx_v4l2::field_count to em28xx_enable_analog_tuner()
but it should be done in em28xx_start_analog_streaming().
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loic Poulain [Tue, 4 Dec 2018 12:25:32 +0000 (13:25 +0100)]
mmc: sdhci-msm: Disable CDR function on TX
commit
a89e7bcb18081c611eb6cf50edd440fa4983a71a upstream.
The Clock Data Recovery (CDR) circuit allows to automatically adjust
the RX sampling-point/phase for high frequency cards (SDR104, HS200...).
CDR is automatically enabled during DLL configuration.
However, according to the APQ8016 reference manual, this function
must be disabled during TX and tuning phase in order to prevent any
interferences during tuning challenges and unexpected phase alteration
during TX transfers.
This patch enables/disables CDR according to the current transfer mode.
This fixes sporadic write transfer issues observed with some SDR104 and
HS200 cards.
Inspired by sdhci-msm downstream patch:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/432516/
Reported-by: Leonid Segal <leonid.s@variscite.com>
Reported-by: Manabu Igusa <migusa@arrowjapan.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[georgi: backport to v4.14]
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Hartkopp [Fri, 4 Jan 2019 14:55:26 +0000 (15:55 +0100)]
can: gw: ensure DLC boundaries after CAN frame modification
commit
0aaa81377c5a01f686bcdb8c7a6929a7bf330c68 upstream.
Muyu Yu provided a POC where user root with CAP_NET_ADMIN can create a CAN
frame modification rule that makes the data length code a higher value than
the available CAN frame data size. In combination with a configured checksum
calculation where the result is stored relatively to the end of the data
(e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in
skb_shared_info) can be rewritten which finally can cause a system crash.
Michael Kubecek suggested to drop frames that have a DLC exceeding the
available space after the modification process and provided a patch that can
handle CAN FD frames too. Within this patch we also limit the length for the
checksum calculations to the maximum of Classic CAN data length (8).
CAN frames that are dropped by these additional checks are counted with the
CGW_DELETED counter which indicates misconfigurations in can-gw rules.
This fixes CVE-2019-3701.
Reported-by: Muyu Yu <ieatmuttonchuan@gmail.com>
Reported-by: Marcus Meissner <meissner@suse.de>
Suggested-by: Michal Kubecek <mkubecek@suse.cz>
Tested-by: Muyu Yu <ieatmuttonchuan@gmail.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Safonov [Wed, 9 Jan 2019 01:17:40 +0000 (01:17 +0000)]
tty: Don't hold ldisc lock in tty_reopen() if ldisc present
commit
d3736d82e8169768218ee0ef68718875918091a0 upstream.
Try to get reference for ldisc during tty_reopen().
If ldisc present, we don't need to do tty_ldisc_reinit() and lock the
write side for line discipline semaphore.
Effectively, it optimizes fast-path for tty_reopen(), but more
importantly it won't interrupt ongoing IO on the tty as no ldisc change
is needed.
Fixes user-visible issue when tty_reopen() interrupted login process for
user with a long password, observed and reported by Lukas.
Fixes:
c96cf923a98d ("tty: Don't block on IO when ldisc change is pending")
Fixes:
83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()")
Cc: Jiri Slaby <jslaby@suse.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Tested-by: Lukas F. Hartmann <lukas@mntmn.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Safonov [Thu, 1 Nov 2018 00:24:49 +0000 (00:24 +0000)]
tty: Simplify tty->count math in tty_reopen()
commit
cf62a1a13749db0d32b5cdd800ea91a4087319de upstream.
As notted by Jiri, tty_ldisc_reinit() shouldn't rely on tty counter.
Simplify math by increasing the counter after reinit success.
Cc: Jiri Slaby <jslaby@suse.com>
Link: lkml.kernel.org/r/<
20180829022353.23568-2-dima@arista.com>
Suggested-by: Jiri Slaby <jslaby@suse.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Safonov [Thu, 1 Nov 2018 00:24:47 +0000 (00:24 +0000)]
tty: Hold tty_ldisc_lock() during tty_reopen()
commit
83d817f41070c48bc3eb7ec18e43000a548fca5c upstream.
tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup()
nor set_ldisc() nor tty_ldisc_release() as they use tty lock.
But it races with anyone who expects line discipline to be the same
after hoding read semaphore in tty_ldisc_ref().
We've seen the following crash on v4.9.108 stable:
BUG: unable to handle kernel paging request at
0000000000002260
IP: [..] n_tty_receive_buf_common+0x5f/0x86d
Workqueue: events_unbound flush_to_ldisc
Call Trace:
[..] n_tty_receive_buf2
[..] tty_ldisc_receive_buf
[..] flush_to_ldisc
[..] process_one_work
[..] worker_thread
[..] kthread
[..] ret_from_fork
tty_ldisc_reinit() should be called with ldisc_sem hold for writing,
which will protect any reader against line discipline changes.
Cc: Jiri Slaby <jslaby@suse.com>
Cc: stable@vger.kernel.org # b027e2298bd5 ("tty: fix data race between tty_init_dev and flush of buf")
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: syzbot+3aa9784721dfb90e984d@syzkaller.appspotmail.com
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Tested-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Safonov [Thu, 1 Nov 2018 00:24:46 +0000 (00:24 +0000)]
tty/ldsem: Wake up readers after timed out down_write()
commit
231f8fd0cca078bd4396dd7e380db813ac5736e2 upstream.
ldsem_down_read() will sleep if there is pending writer in the queue.
If the writer times out, readers in the queue should be woken up,
otherwise they may miss a chance to acquire the semaphore until the last
active reader will do ldsem_up_read().
There was a couple of reports where there was one active reader and
other readers soft locked up:
Showing all locks held in the system:
2 locks held by khungtaskd/17:
#0: (rcu_read_lock){......}, at: watchdog+0x124/0x6d1
#1: (tasklist_lock){.+.+..}, at: debug_show_all_locks+0x72/0x2d3
2 locks held by askfirst/123:
#0: (&tty->ldisc_sem){.+.+.+}, at: ldsem_down_read+0x46/0x58
#1: (&ldata->atomic_read_lock){+.+...}, at: n_tty_read+0x115/0xbe4
Prevent readers wait for active readers to release ldisc semaphore.
Link: lkml.kernel.org/r/
20171121132855.ajdv4k6swzhvktl6@wfg-t540p.sh.intel.com
Link: lkml.kernel.org/r/
20180907045041.GF1110@shao2-debian
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 16 Jan 2019 21:07:13 +0000 (22:07 +0100)]
Linux 4.14.94
Christoffer Dall [Tue, 11 Dec 2018 12:23:57 +0000 (13:23 +0100)]
KVM: arm/arm64: Fix VMID alloc race by reverting to lock-less
commit
fb544d1ca65a89f7a3895f7531221ceeed74ada7 upstream.
We recently addressed a VMID generation race by introducing a read/write
lock around accesses and updates to the vmid generation values.
However, kvm_arch_vcpu_ioctl_run() also calls need_new_vmid_gen() but
does so without taking the read lock.
As far as I can tell, this can lead to the same kind of race:
VM 0, VCPU 0 VM 0, VCPU 1
------------ ------------
update_vttbr (vmid 254)
update_vttbr (vmid 1) // roll over
read_lock(kvm_vmid_lock);
force_vm_exit()
local_irq_disable
need_new_vmid_gen == false //because vmid gen matches
enter_guest (vmid 254)
kvm_arch.vttbr = <PGD>:<VMID 1>
read_unlock(kvm_vmid_lock);
enter_guest (vmid 1)
Which results in running two VCPUs in the same VM with different VMIDs
and (even worse) other VCPUs from other VMs could now allocate clashing
VMID 254 from the new generation as long as VCPU 0 is not exiting.
Attempt to solve this by making sure vttbr is updated before another CPU
can observe the updated VMID generation.
Cc: stable@vger.kernel.org
Fixes:
f0cf47d939d0 "KVM: arm/arm64: Close VMID generation race"
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Mon, 24 Dec 2018 11:44:52 +0000 (14:44 +0300)]
sunrpc: use-after-free in svc_process_common()
commit
d4b09acf924b84bae77cad090a9d108e70b43643 upstream.
if node have NFSv41+ mounts inside several net namespaces
it can lead to use-after-free in svc_process_common()
svc_process_common()
/* Setup reply header */
rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp); <<< HERE
svc_process_common() can use incorrect rqstp->rq_xprt,
its caller function bc_svc_process() takes it from serv->sv_bc_xprt.
The problem is that serv is global structure but sv_bc_xprt
is assigned per-netnamespace.
According to Trond, the whole "let's set up rqstp->rq_xprt
for the back channel" is nothing but a giant hack in order
to work around the fact that svc_process_common() uses it
to find the xpt_ops, and perform a couple of (meaningless
for the back channel) tests of xpt_flags.
All we really need in svc_process_common() is to be able to run
rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr()
Bruce J Fields points that this xpo_prep_reply_hdr() call
is an awfully roundabout way just to do "svc_putnl(resv, 0);"
in the tcp case.
This patch does not initialiuze rqstp->rq_xprt in bc_svc_process(),
now it calls svc_process_common() with rqstp->rq_xprt = NULL.
To adjust reply header svc_process_common() just check
rqstp->rq_prot and calls svc_tcp_prep_reply_hdr() for tcp case.
To handle rqstp->rq_xprt = NULL case in functions called from
svc_process_common() patch intruduces net namespace pointer
svc_rqst->rq_bc_net and adjust SVC_NET() definition.
Some other function was also adopted to properly handle described case.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: stable@vger.kernel.org
Fixes:
23c20ecd4475 ("NFS: callback up - users counting cleanup")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
v2: - added lost extern svc_tcp_prep_reply_hdr()
- dropped trace_svc_process() changes
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Mon, 31 Dec 2018 05:11:07 +0000 (00:11 -0500)]
ext4: track writeback errors using the generic tracking infrastructure
commit
95cb67138746451cc84cf8e516e14989746e93b0 upstream.
We already using mapping_set_error() in fs/ext4/page_io.c, so all we
need to do is to use file_check_and_advance_wb_err() when handling
fsync() requests in ext4_sync_file().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Mon, 31 Dec 2018 05:10:48 +0000 (00:10 -0500)]
ext4: use ext4_write_inode() when fsyncing w/o a journal
commit
ad211f3e94b314a910d4af03178a0b52a7d1ee0a upstream.
In no-journal mode, we previously used __generic_file_fsync() in
no-journal mode. This triggers a lockdep warning, and in addition,
it's not safe to depend on the inode writeback mechanism in the case
ext4. We can solve both problems by calling ext4_write_inode()
directly.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Mon, 31 Dec 2018 04:20:39 +0000 (23:20 -0500)]
ext4: avoid kernel warning when writing the superblock to a dead device
commit
e86807862e6880809f191c4cea7f88a489f0ed34 upstream.
The xfstests generic/475 test switches the underlying device with
dm-error while running a stress test. This results in a large number
of file system errors, and since we can't lock the buffer head when
marking the superblock dirty in the ext4_grp_locked_error() case, it's
possible the superblock to be !buffer_uptodate() without
buffer_write_io_error() being true.
We need to set buffer_uptodate() before we call mark_buffer_dirty() or
this will trigger a WARN_ON. It's safe to do this since the
superblock must have been properly read into memory or the mount would
have been successful. So if buffer_uptodate() is not set, we can
safely assume that this happened due to a failed attempt to write the
superblock.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 25 Dec 2018 05:56:33 +0000 (00:56 -0500)]
ext4: fix a potential fiemap/page fault deadlock w/ inline_data
commit
2b08b1f12cd664dc7d5c84ead9ff25ae97ad5491 upstream.
The ext4_inline_data_fiemap() function calls fiemap_fill_next_extent()
while still holding the xattr semaphore. This is not necessary and it
triggers a circular lockdep warning. This is because
fiemap_fill_next_extent() could trigger a page fault when it writes
into page which triggers a page fault. If that page is mmaped from
the inline file in question, this could very well result in a
deadlock.
This problem can be reproduced using generic/519 with a file system
configuration which has the inline_data feature enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 25 Dec 2018 01:27:08 +0000 (20:27 -0500)]
ext4: make sure enough credits are reserved for dioread_nolock writes
commit
812c0cab2c0dfad977605dbadf9148490ca5d93f upstream.
There are enough credits reserved for most dioread_nolock writes;
however, if the extent tree is sufficiently deep, and/or quota is
enabled, the code was not allowing for all eventualities when
reserving journal credits for the unwritten extent conversion.
This problem can be seen using xfstests ext4/034:
WARNING: CPU: 1 PID: 257 at fs/ext4/ext4_jbd2.c:271 __ext4_handle_dirty_metadata+0x10c/0x180
Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work
RIP: 0010:__ext4_handle_dirty_metadata+0x10c/0x180
...
EXT4-fs: ext4_free_blocks:4938: aborting transaction: error 28 in __ext4_handle_dirty_metadata
EXT4: jbd2_journal_dirty_metadata failed: handle type 11 started at line 4921, credits 4/0, errcode -28
EXT4-fs error (device dm-1) in ext4_free_blocks:4950: error 28
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Tue, 8 Jan 2019 18:47:38 +0000 (19:47 +0100)]
rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
commit
85f5a4d666fd9be73856ed16bb36c5af5b406b29 upstream.
There is a window between when RBD_DEV_FLAG_REMOVING is set and when
the device is removed from rbd_dev_list. During this window, we set
"already" and return 0.
Returning 0 from write(2) can confuse userspace tools because
0 indicates that nothing was written. In particular, "rbd unmap"
will retry the write multiple times a second:
10:28:05.463299 write(4, "0", 1) = 0
10:28:05.463509 write(4, "0", 1) = 0
10:28:05.463720 write(4, "0", 1) = 0
10:28:05.463942 write(4, "0", 1) = 0
10:28:05.464155 write(4, "0", 1) = 0
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Mironov [Tue, 8 Jan 2019 07:23:52 +0000 (12:23 +0500)]
drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2
commit
62d85b3bf9d978ed4b6b2aeef5cf0ccf1423906e upstream.
SDL 1.2 sets all fields related to the pixel format to zero in some
cases[1]. Prior to commit
db05c48197759 ("drm: fb-helper: Reject all
pixel format changing requests"), there was an unintentional workaround
for this that existed for more than a decade. First in device-specific DRM
drivers, then here in drm_fb_helper.c.
Previous code containing this workaround just ignores pixel format fields
from userspace code. Not a good thing either, as this way, driver may
silently use pixel format different from what client actually requested,
and this in turn will lead to displaying garbage on the screen. I think
that returning EINVAL to userspace in this particular case is the right
option, so I decided to left code from problematic commit untouched
instead of just reverting it entirely.
Here is the steps required to reproduce this problem exactly:
1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL
support. SDL should be compiled with fbdev support (which is
on by default).
2) Create /etc/fb.modes with following contents (values seems
not used, and just required to trigger problematic code in
SDL):
mode "test"
geometry 1 1 1 1 1
timings 1 1 1 1 1 1 1
endmode
3) Create ~/.fceux/fceux.cfg with following contents:
SDL.Hotkeys.Quit = 27
SDL.DoubleBuffering = 1
4) Ensure that screen resolution is at least 1280x960 (e.g.
append "video=Virtual-1:1280x960-32" to the kernel cmdline
for qemu/QXL).
5) Try to run fceux on VT with some ROM file[3]:
# ./fceux color_test.nes
[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c,
FB_SetVideoMode()
[2] http://www.fceux.com
[3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes
Reported-by: saahriktu <mail@saahriktu.org>
Suggested-by: saahriktu <mail@saahriktu.org>
Cc: stable@vger.kernel.org
Fixes:
db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
[danvet: Delete misleading comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yi Zeng [Wed, 9 Jan 2019 07:33:07 +0000 (15:33 +0800)]
i2c: dev: prevent adapter retries and timeout being set as minus value
commit
6ebec961d59bccf65d08b13fc1ad4e6272a89338 upstream.
If adapter->retries is set to a minus value from user space via ioctl,
it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to
adapter->algo->master_xfer and adapter->algo->smbus_xfer that is
registered by the underlying bus drivers, and return value 0 to all the
callers. The bus driver will never be accessed anymore by all users,
besides, the users may still get successful return value without any
error or information log print out.
If adapter->timeout is set to minus value from user space via ioctl,
it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer
always break after the the first try, due to the time_after always
returns true.
Signed-off-by: Yi Zeng <yizeng@asrmicro.com>
[wsa: minor grammar updates to commit message]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Fri, 4 Jan 2019 22:10:54 +0000 (23:10 +0100)]
ACPI / PMIC: xpower: Fix TS-pin current-source handling
commit
2b531d71595d2b5b12782a49b23c335869e2621e upstream.
The current-source used for the battery temp-sensor (TS) is shared with the
GPADC. For proper fuel-gauge and charger operation the TS current-source
needs to be permanently on. But to read the GPADC we need to temporary
switch the TS current-source to ondemand, so that the GPADC can use it,
otherwise we will always read an all 0 value.
The switching from on to on-ondemand is not necessary when the TS
current-source is off (this happens on devices which do not have a TS).
Prior to this commit there were 2 issues with our handling of the TS
current-source switching:
1) We were writing hardcoded values to the ADC TS pin-ctrl register,
overwriting various other unrelated bits. Specifically we were overwriting
the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA
independent of its original setting. On a Chuwi Vi10 tablet this was
causing us to get a too high adc value (due to a too high current-source)
resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in:
ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion]
ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR
This commit fixes this by using regmap_update_bits to change only the
relevant bits.
2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally
enabling the TS current-source even on devices where the TS-pin is not used
and the current-source thus was off on entry of the function.
This commit fixes this by checking if the TS current-source is off when
entering intel_xpower_pmic_get_raw_temp() and if so it is left as is.
Fixes:
58eefe2f3f53 (ACPI / PMIC: xpower: Do pinswitch ... reading GPADC)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 30 Dec 2018 17:25:00 +0000 (18:25 +0100)]
ACPI: power: Skip duplicate power resource references in _PRx
commit
7d7b467cb95bf29597b417d4990160d4ea6d69b9 upstream.
Some ACPI tables contain duplicate power resource references like this:
Name (_PR0, Package (0x04) // _PR0: Power Resources for D0
{
P28P,
P18P,
P18P,
CLK4
})
This causes a WARN_ON in sysfs_add_link_to_group() because we end up
adding a link to the same acpi_device twice:
sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/
808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1
Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016
Call Trace:
dump_stack+0x5c/0x80
sysfs_warn_dup.cold.3+0x17/0x2a
sysfs_do_create_link_sd.isra.2+0xa9/0xb0
sysfs_add_link_to_group+0x30/0x50
acpi_power_expose_list+0x74/0xa0
acpi_power_add_remove_device+0x50/0xa0
acpi_add_single_object+0x26b/0x5f0
acpi_bus_check_add+0xc4/0x250
...
To address this issue, make acpi_extract_power_resources() check for
duplicates and simply skip them when found.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Subject & changelog, comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Hocko [Tue, 8 Jan 2019 23:23:07 +0000 (15:23 -0800)]
mm, memcg: fix reclaim deadlock with writeback
commit
63f3655f950186752236bb88a22f8252c11ce394 upstream.
Liu Bo has experienced a deadlock between memcg (legacy) reclaim and the
ext4 writeback
task1:
wait_on_page_bit+0x82/0xa0
shrink_page_list+0x907/0x960
shrink_inactive_list+0x2c7/0x680
shrink_node_memcg+0x404/0x830
shrink_node+0xd8/0x300
do_try_to_free_pages+0x10d/0x330
try_to_free_mem_cgroup_pages+0xd5/0x1b0
try_charge+0x14d/0x720
memcg_kmem_charge_memcg+0x3c/0xa0
memcg_kmem_charge+0x7e/0xd0
__alloc_pages_nodemask+0x178/0x260
alloc_pages_current+0x95/0x140
pte_alloc_one+0x17/0x40
__pte_alloc+0x1e/0x110
alloc_set_pte+0x5fe/0xc20
do_fault+0x103/0x970
handle_mm_fault+0x61e/0xd10
__do_page_fault+0x252/0x4d0
do_page_fault+0x30/0x80
page_fault+0x28/0x30
task2:
__lock_page+0x86/0xa0
mpage_prepare_extent_to_map+0x2e7/0x310 [ext4]
ext4_writepages+0x479/0xd60
do_writepages+0x1e/0x30
__writeback_single_inode+0x45/0x320
writeback_sb_inodes+0x272/0x600
__writeback_inodes_wb+0x92/0xc0
wb_writeback+0x268/0x300
wb_workfn+0xb4/0x390
process_one_work+0x189/0x420
worker_thread+0x4e/0x4b0
kthread+0xe6/0x100
ret_from_fork+0x41/0x50
He adds
"task1 is waiting for the PageWriteback bit of the page that task2 has
collected in mpd->io_submit->io_bio, and tasks2 is waiting for the
LOCKED bit the page which tasks1 has locked"
More precisely task1 is handling a page fault and it has a page locked
while it charges a new page table to a memcg. That in turn hits a
memory limit reclaim and the memcg reclaim for legacy controller is
waiting on the writeback but that is never going to finish because the
writeback itself is waiting for the page locked in the #PF path. So
this is essentially ABBA deadlock:
lock_page(A)
SetPageWriteback(A)
unlock_page(A)
lock_page(B)
lock_page(B)
pte_alloc_pne
shrink_page_list
wait_on_page_writeback(A)
SetPageWriteback(B)
unlock_page(B)
# flush A, B to clear the writeback
This accumulating of more pages to flush is used by several filesystems
to generate a more optimal IO patterns.
Waiting for the writeback in legacy memcg controller is a workaround for
pre-mature OOM killer invocations because there is no dirty IO
throttling available for the controller. There is no easy way around
that unfortunately. Therefore fix this specific issue by pre-allocating
the page table outside of the page lock. We have that handy
infrastructure for that already so simply reuse the fault-around pattern
which already does this.
There are probably other hidden __GFP_ACCOUNT | GFP_KERNEL allocations
from under a fs page locked but they should be really rare. I am not
aware of a better solution unfortunately.
[akpm@linux-foundation.org: fix mm/memory.c:__do_fault()]
[akpm@linux-foundation.org: coding-style fixes]
[mhocko@kernel.org: enhance comment, per Johannes]
Link: http://lkml.kernel.org/r/20181214084948.GA5624@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20181213092221.27270-1-mhocko@kernel.org
Fixes:
c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Liu Bo <bo.liu@linux.alibaba.com>
Debugged-by: Liu Bo <bo.liu@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Stancek [Tue, 8 Jan 2019 23:23:28 +0000 (15:23 -0800)]
mm: page_mapped: don't assume compound page is huge or THP
commit
8ab88c7169b7fba98812ead6524b9d05bc76cf00 upstream.
LTP proc01 testcase has been observed to rarely trigger crashes
on arm64:
page_mapped+0x78/0xb4
stable_page_flags+0x27c/0x338
kpageflags_read+0xfc/0x164
proc_reg_read+0x7c/0xb8
__vfs_read+0x58/0x178
vfs_read+0x90/0x14c
SyS_read+0x60/0xc0
The issue is that page_mapped() assumes that if compound page is not
huge, then it must be THP. But if this is 'normal' compound page
(COMPOUND_PAGE_DTOR), then following loop can keep running (for
HPAGE_PMD_NR iterations) until it tries to read from memory that isn't
mapped and triggers a panic:
for (i = 0; i < hpage_nr_pages(page); i++) {
if (atomic_read(&page[i]._mapcount) >= 0)
return true;
}
I could replicate this on x86 (v4.20-rc4-98-g60b548237fed) only
with a custom kernel module [1] which:
- allocates compound page (PAGEC) of order 1
- allocates 2 normal pages (COPY), which are initialized to 0xff (to
satisfy _mapcount >= 0)
- 2 PAGEC page structs are copied to address of first COPY page
- second page of COPY is marked as not present
- call to page_mapped(COPY) now triggers fault on access to 2nd COPY
page at offset 0x30 (_mapcount)
[1] https://github.com/jstancek/reproducers/blob/master/kernel/page_mapped_crash/repro.c
Fix the loop to iterate for "1 << compound_order" pages.
Kirrill said "IIRC, sound subsystem can producuce custom mapped compound
pages".
Link: http://lkml.kernel.org/r/c440d69879e34209feba21e12d236d06bc0a25db.1543577156.git.jstancek@redhat.com
Fixes:
e1534ae95004 ("mm: differentiate page_mapped() from page_mapcount() for compound pages")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Debugged-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Lameter [Tue, 8 Jan 2019 23:23:00 +0000 (15:23 -0800)]
slab: alien caches must not be initialized if the allocation of the alien cache failed
commit
09c2e76ed734a1d36470d257a778aaba28e86531 upstream.
Callers of __alloc_alien() check for NULL. We must do the same check in
__alloc_alien_cache to avoid NULL pointer dereferences on allocation
failures.
Link: http://lkml.kernel.org/r/010001680f42f192-82b4e12e-1565-4ee0-ae1f-1e98974906aa-000000@email.amazonses.com
Fixes:
49dfc304ba241 ("slab: use the lock on alien_cache, instead of the lock on array_cache")
Fixes:
c8522a3a5832b ("Slab: introduce alloc_alien")
Signed-off-by: Christoph Lameter <cl@linux.com>
Reported-by: syzbot+d6ed4ec679652b4fd4e4@syzkaller.appspotmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jack Stocker [Thu, 3 Jan 2019 21:56:53 +0000 (21:56 +0000)]
USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
commit
3483254b89438e60f719937376c5e0ce2bc46761 upstream.
To match the Corsair Strafe RGB, the Corsair K70 RGB also requires
USB_QUIRK_DELAY_CTRL_MSG to completely resolve boot connection issues
discussed here: https://github.com/ckb-next/ckb-next/issues/42.
Otherwise roughly 1 in 10 boots the keyboard will fail to be detected.
Patch that applied delay control quirk for Corsair Strafe RGB:
cb88a0588717 ("usb: quirks: add control message delay for 1b1c:1b20")
Previous K70 RGB patch to add delay-init quirk:
7a1646d92257 ("Add delay-init quirk for Corsair K70 RGB keyboards")
Signed-off-by: Jack Stocker <jackstocker.93@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Icenowy Zheng [Thu, 3 Jan 2019 03:26:18 +0000 (11:26 +0800)]
USB: storage: add quirk for SMI SM3350
commit
0a99cc4b8ee83885ab9f097a3737d1ab28455ac0 upstream.
The SMI SM3350 USB-UFS bridge controller cannot handle long sense request
correctly and will make the chip refuse to do read/write when requested
long sense.
Add a bad sense quirk for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Icenowy Zheng [Thu, 3 Jan 2019 03:26:17 +0000 (11:26 +0800)]
USB: storage: don't insert sane sense for SPC3+ when bad sense specified
commit
c5603d2fdb424849360fe7e3f8c1befc97571b8c upstream.
Currently the code will set US_FL_SANE_SENSE flag unconditionally if
device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
which claims SPC4, will show strange behavior with 96-byte sense
(put the chip into a wrong state that cannot read/write anything).
Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
SPC4+ devices.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Fri, 28 Dec 2018 15:15:41 +0000 (16:15 +0100)]
usb: cdc-acm: send ZLP for Telit 3G Intel based modems
commit
34aabf918717dd14e05051896aaecd3b16b53d95 upstream.
Telit 3G Intel based modems require zero packet to be sent if
out data size is equal to the endpoint max packet size.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ross Lagerwall [Tue, 8 Jan 2019 18:30:57 +0000 (18:30 +0000)]
cifs: Fix potential OOB access of lock element array
commit
b9a74cde94957d82003fb9f7ab4777938ca851cd upstream.
If maxBuf is small but non-zero, it could result in a zero sized lock
element array which we would then try and access OOB.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Thu, 10 Jan 2019 19:27:28 +0000 (11:27 -0800)]
CIFS: Do not hide EINTR after sending network packets
commit
ee13919c2e8d1f904e035ad4b4239029a8994131 upstream.
Currently we hide EINTR code returned from sock_sendmsg()
and return 0 instead. This makes a caller think that we
successfully completed the network operation which is not
true. Fix this by properly returning EINTR to callers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Wed, 19 Dec 2018 22:49:09 +0000 (22:49 +0000)]
CIFS: Fix adjustment of credits for MTU requests
commit
b983f7e92348d7e7d091db1b78b7915e9dd3d63a upstream.
Currently for MTU requests we allocate maximum possible credits
in advance and then adjust them according to the request size.
While we were adjusting the number of credits belonging to the
server, we were skipping adjustment of credits belonging to the
request. This patch fixes it by setting request credits to
CreditCharge field value of SMB2 packet header.
Also ask 1 credit more for async read and write operations to
increase parallelism and match the behavior of other operations.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Wed, 9 Jan 2019 09:05:24 +0000 (17:05 +0800)]
ALSA: hda/realtek - Disable headset Mic VREF for headset mode of ALC225
commit
d1dd42110d2727e81b9265841a62bc84c454c3a2 upstream.
Disable Headset Mic VREF for headset mode of ALC225.
This will be controlled by coef bits of headset mode functions.
[ Fixed a compile warning and code simplification -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Wed, 9 Jan 2019 08:23:37 +0000 (16:23 +0800)]
ALSA: hda/realtek - Add unplug function into unplug state of Headset Mode for ALC225
commit
4d4b0c52bde470c379f5d168d5c139ad866cb808 upstream.
Forgot to add unplug function to unplug state of headset mode
for ALC225.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Thu, 3 Jan 2019 07:53:39 +0000 (15:53 +0800)]
ALSA: hda/realtek - Support Dell headset mode for New AIO platform
commit
c2a7c55a04065c3b0c32d23b099db7ea1dbf6250 upstream.
Dell has new platform for ALC274.
This will support to enable headset mode.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WANG Chao [Mon, 10 Dec 2018 16:37:25 +0000 (00:37 +0800)]
x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE
commit
e4f358916d528d479c3c12bd2fd03f2d5a576380 upstream.
Commit
4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support")
replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the
remaining pieces.
[ bp: Massage commit message. ]
Fixes:
4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support")
Signed-off-by: WANG Chao <chao.wang@ucloud.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linux-kbuild@vger.kernel.org
Cc: srinivas.eeda@oracle.com
Cc: stable <stable@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rik van Riel [Tue, 14 Nov 2017 21:54:23 +0000 (16:54 -0500)]
x86,kvm: move qemu/guest FPU switching out to vcpu_run
commit
f775b13eedee2f7f3c6fdd4e90fb79090ce5d339 upstream.
Currently, every time a VCPU is scheduled out, the host kernel will
first save the guest FPU/xstate context, then load the qemu userspace
FPU context, only to then immediately save the qemu userspace FPU
context back to memory. When scheduling in a VCPU, the same extraneous
FPU loads and saves are done.
This could be avoided by moving from a model where the guest FPU is
loaded and stored with preemption disabled, to a model where the
qemu userspace FPU is swapped out for the guest FPU context for
the duration of the KVM_RUN ioctl.
This is done under the VCPU mutex, which is also taken when other
tasks inspect the VCPU FPU context, so the code should already be
safe for this change. That should come as no surprise, given that
s390 already has this optimization.
This can fix a bug where KVM calls get_user_pages while owning the
FPU, and the file system ends up requesting the FPU again:
[258270.527947] __warn+0xcb/0xf0
[258270.527948] warn_slowpath_null+0x1d/0x20
[258270.527951] kernel_fpu_disable+0x3f/0x50
[258270.527953] __kernel_fpu_begin+0x49/0x100
[258270.527955] kernel_fpu_begin+0xe/0x10
[258270.527958] crc32c_pcl_intel_update+0x84/0xb0
[258270.527961] crypto_shash_update+0x3f/0x110
[258270.527968] crc32c+0x63/0x8a [libcrc32c]
[258270.527975] dm_bm_checksum+0x1b/0x20 [dm_persistent_data]
[258270.527978] node_prepare_for_write+0x44/0x70 [dm_persistent_data]
[258270.527985] dm_block_manager_write_callback+0x41/0x50 [dm_persistent_data]
[258270.527988] submit_io+0x170/0x1b0 [dm_bufio]
[258270.527992] __write_dirty_buffer+0x89/0x90 [dm_bufio]
[258270.527994] __make_buffer_clean+0x4f/0x80 [dm_bufio]
[258270.527996] __try_evict_buffer+0x42/0x60 [dm_bufio]
[258270.527998] dm_bufio_shrink_scan+0xc0/0x130 [dm_bufio]
[258270.528002] shrink_slab.part.40+0x1f5/0x420
[258270.528004] shrink_node+0x22c/0x320
[258270.528006] do_try_to_free_pages+0xf5/0x330
[258270.528008] try_to_free_pages+0xe9/0x190
[258270.528009] __alloc_pages_slowpath+0x40f/0xba0
[258270.528011] __alloc_pages_nodemask+0x209/0x260
[258270.528014] alloc_pages_vma+0x1f1/0x250
[258270.528017] do_huge_pmd_anonymous_page+0x123/0x660
[258270.528021] handle_mm_fault+0xfd3/0x1330
[258270.528025] __get_user_pages+0x113/0x640
[258270.528027] get_user_pages+0x4f/0x60
[258270.528063] __gfn_to_pfn_memslot+0x120/0x3f0 [kvm]
[258270.528108] try_async_pf+0x66/0x230 [kvm]
[258270.528135] tdp_page_fault+0x130/0x280 [kvm]
[258270.528149] kvm_mmu_page_fault+0x60/0x120 [kvm]
[258270.528158] handle_ept_violation+0x91/0x170 [kvm_intel]
[258270.528162] vmx_handle_exit+0x1ca/0x1400 [kvm_intel]
No performance changes were detected in quick ping-pong tests on
my 4 socket system, which is expected since an FPU+xstate load is
on the order of 0.1us, while ping-ponging between CPUs is on the
order of 20us, and somewhat noisy.
Cc: stable@vger.kernel.org
Signed-off-by: Rik van Riel <riel@redhat.com>
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Fixed a bug where reset_vcpu called put_fpu without preceding load_fpu,
which happened inside from KVM_CREATE_VCPU ioctl. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 13 Jan 2019 09:01:07 +0000 (10:01 +0100)]
Linux 4.14.93
Jiri Slaby [Tue, 24 Apr 2018 07:43:44 +0000 (09:43 +0200)]
tools: power/acpi, revert to LD = gcc
commit
755396163148b50fe1afb4bdd3365e47f3ff7a42 upstream.
Commit
7ed1c1901fe5 (tools: fix cross-compile var clobbering) removed
setting of LD to $(CROSS_COMPILE)gcc. This broke build of acpica
(acpidump) in power/acpi:
ld: unrecognized option '-D_LINUX'
The tools pass CFLAGS to the linker (incl. -D_LINUX), so revert this
particular change and let LD be $(CC) again. Note that the old behaviour
was a bit different, it used $(CROSS_COMPILE)gcc which was eliminated by
the commit
7ed1c1901fe5. We use $(CC) for that reason.
Fixes:
7ed1c1901fe5 (tools: fix cross-compile var clobbering)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Mironov [Mon, 24 Dec 2018 15:13:05 +0000 (20:13 +0500)]
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
commit
38355a5f9a22bfa5bd5b1bb79805aca39fa53729 upstream.
This happened when I tried to boot normal Fedora 29 system with latest
available kernel (from fedora rawhide, plus some unrelated custom
patches):
BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP PTI
CPU: 6 PID: 1422 Comm: libvirtd Tainted: G I 4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1
Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018
RIP: 0010: (null)
Code: Bad RIP value.
RSP: 0018:
ffffa47ccdc9fbe0 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
00000000000003e8 RCX:
ffffa47ccdc9fbf8
RDX:
ffffa47ccdc9fc00 RSI:
ffff97d9ee7b01f8 RDI:
ffff97d9f0150b80
RBP:
ffff97d9f0150b80 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000003
R13:
ffff97d9ef1e53e8 R14:
0000000000000009 R15:
ffff97d9f0ac6730
FS:
00007f4d224ef700(0000) GS:
ffff97d9fa200000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffffffffd6 CR3:
00000011ece52006 CR4:
00000000000206e0
Call Trace:
? bnx2x_chip_cleanup+0x195/0x610 [bnx2x]
? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x]
? bnx2x_reload_if_running+0x24/0x40 [bnx2x]
? bnx2x_set_features+0x79/0xa0 [bnx2x]
? __netdev_update_features+0x244/0x9e0
? netlink_broadcast_filtered+0x136/0x4b0
? netdev_update_features+0x22/0x60
? dev_disable_lro+0x1c/0xe0
? devinet_sysctl_forward+0x1c6/0x211
? proc_sys_call_handler+0xab/0x100
? __vfs_write+0x36/0x1a0
? rcu_read_lock_sched_held+0x79/0x80
? rcu_sync_lockdep_assert+0x2e/0x60
? __sb_start_write+0x14c/0x1b0
? vfs_write+0x159/0x1c0
? vfs_write+0xba/0x1c0
? ksys_write+0x52/0xc0
? do_syscall_64+0x60/0x1f0
? entry_SYSCALL_64_after_hwframe+0x49/0xbe
After some investigation I figured out that recently added cleanup code
tries to call VLAN filtering de-initialization function which exist only
for newer hardware. Corresponding function pointer is not
set (== 0) for older hardware, namely these chips:
#define CHIP_NUM_57710 0x164e
#define CHIP_NUM_57711 0x164f
#define CHIP_NUM_57711E 0x1650
And I have one of those in my test system:
Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650]
Function bnx2x_init_vlan_mac_fp_objs() from
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to
initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not.
This regression was introduced after v4.20-rc7, and still exists in v4.20
release.
Fixes:
04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Brezillon [Tue, 9 Oct 2018 13:24:46 +0000 (15:24 +0200)]
drm/vc4: Set ->is_yuv to false when num_planes == 1
commit
2b02a05bdc3a62d36e0d0b015351897109e25991 upstream.
When vc4_plane_state is duplicated ->is_yuv is left assigned to its
previous value, and we never set it back to false when switching to
a non-YUV format.
Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch
of the vc4_plane_setup_clipping_and_scaling() function.
Fixes:
fc04023fafecf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Mon, 10 Dec 2018 08:08:28 +0000 (08:08 +0000)]
lib: fix build failure in CONFIG_DEBUG_VIRTUAL test
commit
10fdf838e5f540beca466e9d1325999c072e5d3f upstream.
On several arches, virt_to_phys() is in io.h
Build fails without it:
CC lib/test_debug_virtual.o
lib/test_debug_virtual.c: In function 'test_debug_virtual_init':
lib/test_debug_virtual.c:26:7: error: implicit declaration of function 'virt_to_phys' [-Werror=implicit-function-declaration]
pa = virt_to_phys(va);
^
Fixes:
e4dace361552 ("lib: add test module for CONFIG_DEBUG_VIRTUAL")
CC: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lubomir Rintel [Fri, 16 Nov 2018 16:23:47 +0000 (17:23 +0100)]
power: supply: olpc_battery: correct the temperature units
commit
ed54ffbe554f0902689fd6d1712bbacbacd11376 upstream.
According to [1] and [2], the temperature values are in tenths of degree
Celsius. Exposing the Celsius value makes the battery appear on fire:
$ upower -i /org/freedesktop/UPower/devices/battery_olpc_battery
...
temperature: 236.9 degrees C
Tested on OLPC XO-1 and OLPC XO-1.75 laptops.
[1] include/linux/power_supply.h
[2] Documentation/power/power_supply_class.txt
Fixes:
fb972873a767 ("[BATTERY] One Laptop Per Child power/battery driver")
Cc: stable@vger.kernel.org
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Wed, 19 Dec 2018 15:19:22 +0000 (17:19 +0200)]
intel_th: msu: Fix an off-by-one in attribute store
commit
ec5b5ad6e272d8d6b92d1007f79574919862a2d2 upstream.
The 'nr_pages' attribute of the 'msc' subdevices parses a comma-separated
list of window sizes, passed from userspace. However, there is a bug in
the string parsing logic wherein it doesn't exclude the comma character
from the range of characters as it consumes them. This leads to an
out-of-bounds access given a sufficiently long list. For example:
> # echo 8,8,8,8 > /sys/bus/intel_th/devices/0-msc0/nr_pages
> ==================================================================
> BUG: KASAN: slab-out-of-bounds in memchr+0x1e/0x40
> Read of size 1 at addr
ffff8803ffcebcd1 by task sh/825
>
> CPU: 3 PID: 825 Comm: npktest.sh Tainted: G W 4.20.0-rc1+
> Call Trace:
> dump_stack+0x7c/0xc0
> print_address_description+0x6c/0x23c
> ? memchr+0x1e/0x40
> kasan_report.cold.5+0x241/0x308
> memchr+0x1e/0x40
> nr_pages_store+0x203/0xd00 [intel_th_msu]
Fix this by accounting for the comma character.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes:
ba82664c134ef ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Borntraeger [Wed, 12 Dec 2018 13:45:18 +0000 (14:45 +0100)]
genwqe: Fix size check
commit
fdd669684655c07dacbdb0d753fd13833de69a33 upstream.
Calling the test program genwqe_cksum with the default buffer size of
2MB triggers the following kernel warning on s390:
WARNING: CPU: 30 PID: 9311 at mm/page_alloc.c:3189 __alloc_pages_nodemask+0x45c/0xbe0
CPU: 30 PID: 9311 Comm: genwqe_cksum Kdump: loaded Not tainted 3.10.0-957.el7.s390x #1
task:
00000005e5d13980 ti:
00000005e7c6c000 task.ti:
00000005e7c6c000
Krnl PSW :
0704c00180000000 00000000002780ac (__alloc_pages_nodemask+0x45c/0xbe0)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3
Krnl GPRS:
00000000002932b8 0000000000b73d7c 0000000000000010 0000000000000009
0000000000000041 00000005e7c6f9b8 0000000000000001 00000000000080d0
0000000000000000 0000000000b70500 0000000000000001 0000000000000000
0000000000b70528 00000000007682c0 0000000000277df2 00000005e7c6f9a0
Krnl Code:
000000000027809e:
de7195001000 ed 1280(114,%r9),0(%r1)
00000000002780a4:
a774fead brc 7,277dfe
#
00000000002780a8:
a7f40001 brc 15,2780aa
>
00000000002780ac:
92011000 mvi 0(%r1),1
00000000002780b0:
a7f4fea7 brc 15,277dfe
00000000002780b4:
9101c6b6 tm 1718(%r12),1
00000000002780b8:
a784ff3a brc 8,277f2c
00000000002780bc:
a7f4fe2e brc 15,277d18
Call Trace:
([<
0000000000277df2>] __alloc_pages_nodemask+0x1a2/0xbe0)
[<
000000000013afae>] s390_dma_alloc+0xfe/0x310
[<
000003ff8065f362>] __genwqe_alloc_consistent+0xfa/0x148 [genwqe_card]
[<
000003ff80658f7a>] genwqe_mmap+0xca/0x248 [genwqe_card]
[<
00000000002b2712>] mmap_region+0x4e2/0x778
[<
00000000002b2c54>] do_mmap+0x2ac/0x3e0
[<
0000000000292d7e>] vm_mmap_pgoff+0xd6/0x118
[<
00000000002b081c>] SyS_mmap_pgoff+0xdc/0x268
[<
00000000002b0a34>] SyS_old_mmap+0x8c/0xb0
[<
000000000074e518>] sysc_tracego+0x14/0x1e
[<
000003ffacf87dc6>] 0x3ffacf87dc6
turns out the check in __genwqe_alloc_consistent uses "> MAX_ORDER"
while the mm code uses ">= MAX_ORDER". Fix genwqe.
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yan, Zheng [Thu, 29 Nov 2018 03:22:50 +0000 (11:22 +0800)]
ceph: don't update importing cap's mseq when handing cap export
commit
3c1392d4c49962a31874af14ae9ff289cb2b3851 upstream.
Updating mseq makes client think importer mds has accepted all prior
cap messages and importer mds knows what caps client wants. Actually
some cap messages may have been dropped because of mseq mismatch.
If mseq is left untouched, importing cap's mds_wanted later will get
reset by cap import message.
Cc: stable@vger.kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 27 Dec 2018 21:46:17 +0000 (13:46 -0800)]
sched/fair: Fix infinite loop in update_blocked_averages() by reverting
a9e7f6544b9c
commit
c40f7d74c741a907cfaeb73a7697081881c497d0 upstream.
Zhipeng Xie, Xie XiuQi and Sargun Dhillon reported lockups in the
scheduler under high loads, starting at around the v4.18 time frame,
and Zhipeng Xie tracked it down to bugs in the rq->leaf_cfs_rq_list
manipulation.
Do a (manual) revert of:
a9e7f6544b9c ("sched/fair: Fix O(nr_cgroups) in load balance path")
It turns out that the list_del_leaf_cfs_rq() introduced by this commit
is a surprising property that was not considered in followup commits
such as:
9c2791f936ef ("sched/fair: Fix hierarchical order in rq->leaf_cfs_rq_list")
As Vincent Guittot explains:
"I think that there is a bigger problem with commit
a9e7f6544b9c and
cfs_rq throttling:
Let take the example of the following topology TG2 --> TG1 --> root:
1) The 1st time a task is enqueued, we will add TG2 cfs_rq then TG1
cfs_rq to leaf_cfs_rq_list and we are sure to do the whole branch in
one path because it has never been used and can't be throttled so
tmp_alone_branch will point to leaf_cfs_rq_list at the end.
2) Then TG1 is throttled
3) and we add TG3 as a new child of TG1.
4) The 1st enqueue of a task on TG3 will add TG3 cfs_rq just before TG1
cfs_rq and tmp_alone_branch will stay on rq->leaf_cfs_rq_list.
With commit
a9e7f6544b9c, we can del a cfs_rq from rq->leaf_cfs_rq_list.
So if the load of TG1 cfs_rq becomes NULL before step 2) above, TG1
cfs_rq is removed from the list.
Then at step 4), TG3 cfs_rq is added at the beginning of rq->leaf_cfs_rq_list
but tmp_alone_branch still points to TG3 cfs_rq because its throttled
parent can't be enqueued when the lock is released.
tmp_alone_branch doesn't point to rq->leaf_cfs_rq_list whereas it should.
So if TG3 cfs_rq is removed or destroyed before tmp_alone_branch
points on another TG cfs_rq, the next TG cfs_rq that will be added,
will be linked outside rq->leaf_cfs_rq_list - which is bad.
In addition, we can break the ordering of the cfs_rq in
rq->leaf_cfs_rq_list but this ordering is used to update and
propagate the update from leaf down to root."
Instead of trying to work through all these cases and trying to reproduce
the very high loads that produced the lockup to begin with, simplify
the code temporarily by reverting
a9e7f6544b9c - which change was clearly
not thought through completely.
This (hopefully) gives us a kernel that doesn't lock up so people
can continue to enjoy their holidays without worrying about regressions. ;-)
[ mingo: Wrote changelog, fixed weird spelling in code comment while at it. ]
Analyzed-by: Xie XiuQi <xiexiuqi@huawei.com>
Analyzed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reported-by: Zhipeng Xie <xiezhipeng1@huawei.com>
Reported-by: Sargun Dhillon <sargun@sargun.me>
Reported-by: Xie XiuQi <xiexiuqi@huawei.com>
Tested-by: Zhipeng Xie <xiezhipeng1@huawei.com>
Tested-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: <stable@vger.kernel.org> # v4.13+
Cc: Bin Li <huawei.libin@huawei.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
a9e7f6544b9c ("sched/fair: Fix O(nr_cgroups) in load balance path")
Link: http://lkml.kernel.org/r/1545879866-27809-1-git-send-email-xiexiuqi@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sohil Mehta [Wed, 21 Nov 2018 23:29:33 +0000 (15:29 -0800)]
iommu/vt-d: Handle domain agaw being less than iommu agaw
commit
3569dd07aaad71920c5ea4da2d5cc9a167c1ffd4 upstream.
The Intel IOMMU driver opportunistically skips a few top level page
tables from the domain paging directory while programming the IOMMU
context entry. However there is an implicit assumption in the code that
domain's adjusted guest address width (agaw) would always be greater
than IOMMU's agaw.
The IOMMU capabilities in an upcoming platform cause the domain's agaw
to be lower than IOMMU's agaw. The issue is seen when the IOMMU supports
both 4-level and 5-level paging. The domain builds a 4-level page table
based on agaw of 2. However the IOMMU's agaw is set as 3 (5-level). In
this case the code incorrectly tries to skip page page table levels.
This causes the IOMMU driver to avoid programming the context entry. The
fix handles this case and programs the context entry accordingly.
Fixes:
de24e55395698 ("iommu/vt-d: Simplify domain_context_mapping_one")
Cc: <stable@vger.kernel.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reported-by: Ramos Falcon, Ernesto R <ernesto.r.ramos.falcon@intel.com>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sagi Grimberg [Thu, 25 Oct 2018 19:40:57 +0000 (12:40 -0700)]
rxe: fix error completion wr_id and qp_num
commit
e48d8ed9c6193502d849b35767fd18e20bbd7ba2 upstream.
Error completions must still contain a valid wr_id and
qp_num such that the consumer can rely on. Correctly
fill these fields in receive error completions.
Reported-by: Walker Benjamin <benjamin.walker@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dominique Martinet [Mon, 5 Nov 2018 08:52:48 +0000 (09:52 +0100)]
9p/net: put a lower bound on msize
commit
574d356b7a02c7e1b01a1d9cba8a26b3c2888f45 upstream.
If the requested msize is too small (either from command line argument
or from the server version reply), we won't get any work done.
If it's *really* too small, nothing will work, and this got caught by
syzbot recently (on a new kmem_cache_create_usercopy() call)
Just set a minimum msize to 4k in both code paths, until someone
complains they have a use-case for a smaller msize.
We need to check in both mount option and server reply individually
because the msize for the first version request would be unchecked
with just a global check on clnt->msize.
Link: http://lkml.kernel.org/r/1541407968-31350-1-git-send-email-asmadeus@codewreck.org
Reported-by: syzbot+0c1d61e4db7db94102ca@syzkaller.appspotmail.com
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Breno Leitao [Wed, 21 Nov 2018 19:21:09 +0000 (17:21 -0200)]
powerpc/tm: Set MSR[TS] just prior to recheckpoint
commit
e1c3743e1a20647c53b719dbf28b48f45d23f2cd upstream.
On a signal handler return, the user could set a context with MSR[TS] bits
set, and these bits would be copied to task regs->msr.
At restore_tm_sigcontexts(), after current task regs->msr[TS] bits are set,
several __get_user() are called and then a recheckpoint is executed.
This is a problem since a page fault (in kernel space) could happen when
calling __get_user(). If it happens, the process MSR[TS] bits were
already set, but recheckpoint was not executed, and SPRs are still invalid.
The page fault can cause the current process to be de-scheduled, with
MSR[TS] active and without tm_recheckpoint() being called. More
importantly, without TEXASR[FS] bit set also.
Since TEXASR might not have the FS bit set, and when the process is
scheduled back, it will try to reclaim, which will be aborted because of
the CPU is not in the suspended state, and, then, recheckpoint. This
recheckpoint will restore thread->texasr into TEXASR SPR, which might be
zero, hitting a BUG_ON().
kernel BUG at /build/linux-sf3Co9/linux-4.9.30/arch/powerpc/kernel/tm.S:434!
cpu 0xb: Vector: 700 (Program Check) at [
c00000041f1576d0]
pc:
c000000000054550: restore_gprs+0xb0/0x180
lr:
0000000000000000
sp:
c00000041f157950
msr:
8000000100021033
current = 0xc00000041f143000
paca = 0xc00000000fb86300 softe: 0 irq_happened: 0x01
pid = 1021, comm = kworker/11:1
kernel BUG at /build/linux-sf3Co9/linux-4.9.30/arch/powerpc/kernel/tm.S:434!
Linux version 4.9.0-3-powerpc64le (debian-kernel@lists.debian.org) (gcc version 6.3.0
20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
enter ? for help
[
c00000041f157b30]
c00000000001bc3c tm_recheckpoint.part.11+0x6c/0xa0
[
c00000041f157b70]
c00000000001d184 __switch_to+0x1e4/0x4c0
[
c00000041f157bd0]
c00000000082eeb8 __schedule+0x2f8/0x990
[
c00000041f157cb0]
c00000000082f598 schedule+0x48/0xc0
[
c00000041f157ce0]
c0000000000f0d28 worker_thread+0x148/0x610
[
c00000041f157d80]
c0000000000f96b0 kthread+0x120/0x140
[
c00000041f157e30]
c00000000000c0e0 ret_from_kernel_thread+0x5c/0x7c
This patch simply delays the MSR[TS] set, so, if there is any page fault in
the __get_user() section, it does not have regs->msr[TS] set, since the TM
structures are still invalid, thus avoiding doing TM operations for
in-kernel exceptions and possible process reschedule.
With this patch, the MSR[TS] will only be set just before recheckpointing
and setting TEXASR[FS] = 1, thus avoiding an interrupt with TM registers in
invalid state.
Other than that, if CONFIG_PREEMPT is set, there might be a preemption just
after setting MSR[TS] and before tm_recheckpoint(), thus, this block must
be atomic from a preemption perspective, thus, calling
preempt_disable/enable() on this code.
It is not possible to move tm_recheckpoint to happen earlier, because it is
required to get the checkpointed registers from userspace, with
__get_user(), thus, the only way to avoid this undesired behavior is
delaying the MSR[TS] set.
The 32-bits signal handler seems to be safe this current issue, but, it
might be exposed to the preemption issue, thus, disabling preemption in
this chunk of code.
Changes from v2:
* Run the critical section with preempt_disable.
Fixes:
87b4e5393af7 ("powerpc/tm: Fix return of active 64bit signals")
Cc: stable@vger.kernel.org (v3.9+)
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Mon, 3 Dec 2018 19:58:05 +0000 (20:58 +0100)]
arm64: relocatable: fix inconsistencies in linker script and options
commit
3bbd3db86470c701091fb1d67f1fab6621debf50 upstream.
readelf complains about the section layout of vmlinux when building
with CONFIG_RELOCATABLE=y (for KASLR):
readelf: Warning: [21]: Link field (0) should index a symtab section.
readelf: Warning: [21]: Info field (0) should index a relocatable section.
Also, it seems that our use of '-pie -shared' is contradictory, and
thus ambiguous. In general, the way KASLR is wired up at the moment
is highly tailored to how ld.bfd happens to implement (and conflate)
PIE executables and shared libraries, so given the current effort to
support other toolchains, let's fix some of these issues as well.
- Drop the -pie linker argument and just leave -shared. In ld.bfd,
the differences between them are unclear (except for the ELF type
of the produced image [0]) but lld chokes on seeing both at the
same time.
- Rename the .rela output section to .rela.dyn, as is customary for
shared libraries and PIE executables, so that it is not misidentified
by readelf as a static relocation section (producing the warnings
above).
- Pass the -z notext and -z norelro options to explicitly instruct the
linker to permit text relocations, and to omit the RELRO program
header (which requires a certain section layout that we don't adhere
to in the kernel). These are the defaults for current versions of
ld.bfd.
- Discard .eh_frame and .gnu.hash sections to avoid them from being
emitted between .head.text and .text, screwing up the section layout.
These changes only affect the ELF image, and produce the same binary
image.
[0]
b9dce7f1ba01 ("arm64: kernel: force ET_DYN ELF type for ...")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Smith <peter.smith@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Tue, 8 Jan 2019 21:15:49 +0000 (13:15 -0800)]
arm64: drop linker script hack to hide __efistub_ symbols
commit
dd6846d774693bfa27d7db4dae5ea67dfe373fa1 upstream.
Commit
1212f7a16af4 ("scripts/kallsyms: filter arm64's __efistub_
symbols") updated the kallsyms code to filter out symbols with
the __efistub_ prefix explicitly, so we no longer require the
hack in our linker script to emit them as absolute symbols.
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[ND: adjusted for context]
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Thu, 1 Mar 2018 17:19:01 +0000 (17:19 +0000)]
scripts/kallsyms: filter arm64's __efistub_ symbols
commit
1212f7a16af492d59304ba3abccbcc5b5e41423e upstream.
On arm64, the EFI stub and the kernel proper are essentially the same
binary, although the EFI stub executes at a different virtual address
as the kernel. For this reason, the EFI stub is restricted in the
symbols it can link to, which is ensured by prefixing all EFI stub
symbols with __efistub_ (and emitting __efistub_ prefixed aliases for
routines that may be shared between the core kernel and the stub)
These symbols are leaking into kallsyms, polluting the namespace, so
let's filter them explicitly.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Coddington [Thu, 1 Nov 2018 17:39:49 +0000 (13:39 -0400)]
lockd: Show pid of lockd for remote locks
commit
b8eee0e90f9797b747113638bc75e739b192ad38 upstream.
Commit
9d5b86ac13c5 ("fs/locks: Remove fl_nspid and use fs-specific l_pid
for remote locks") specified that the l_pid returned for F_GETLK on a local
file that has a remote lock should be the pid of the lock manager process.
That commit, while updating other filesystems, failed to update lockd, such
that locks created by lockd had their fl_pid set to that of the remote
process holding the lock. Fix that here to be the pid of lockd.
Also, fix the client case so that the returned lock pid is negative, which
indicates a remote lock on a remote file.
Fixes:
9d5b86ac13c5 ("fs/locks: Remove fl_nspid and use fs-specific...")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ondrej Mosnacek [Tue, 23 Oct 2018 07:02:17 +0000 (09:02 +0200)]
selinux: policydb - fix byte order and alignment issues
commit
5df275cd4cf51c86d49009f1397132f284ba515e upstream.
Do the LE conversions before doing the Infiniband-related range checks.
The incorrect checks are otherwise causing a failure to load any policy
with an ibendportcon rule on BE systems. This can be reproduced by
running (on e.g. ppc64):
cat >my_module.cil <<EOF
(type test_ibendport_t)
(roletype object_r test_ibendport_t)
(ibendportcon mlx4_0 1 (system_u object_r test_ibendport_t ((s0) (s0))))
EOF
semodule -i my_module.cil
Also, fix loading/storing the 64-bit subnet prefix for OCON_IBPKEY to
use a correctly aligned buffer.
Finally, do not use the 'nodebuf' (u32) buffer where 'buf' (__le32)
should be used instead.
Tested internally on a ppc64 machine with a RHEL 7 kernel with this
patch applied.
Cc: Daniel Jurgens <danielj@mellanox.com>
Cc: Eli Cohen <eli@mellanox.com>
Cc: James Morris <jmorris@namei.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: <stable@vger.kernel.org> # 4.13+
Fixes:
a806f7a1616f ("selinux: Create policydb version for Infiniband support")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 19 Nov 2018 18:01:24 +0000 (20:01 +0200)]
b43: Fix error in cordic routine
commit
8ea3819c0bbef57a51d8abe579e211033e861677 upstream.
The cordic routine for calculating sines and cosines that was added in
commit
6f98e62a9f1b ("b43: update cordic code to match current specs")
contains an error whereby a quantity declared u32 can in fact go negative.
This problem was detected by Priit Laes who is switching b43 to use the
routine in the library functions of the kernel.
Fixes:
986504540306 ("b43: make cordic common (LP-PHY and N-PHY need it)")
Reported-by: Priit Laes <plaes@plaes.org>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Stable <stable@vger.kernel.org> # 2.6.34
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Tue, 4 Dec 2018 14:06:27 +0000 (15:06 +0100)]
gfs2: Fix loop in gfs2_rbm_find
commit
2d29f6b96d8f80322ed2dd895bca590491c38d34 upstream.
Fix the resource group wrap-around logic in gfs2_rbm_find that commit
e579ed4f44 broke. The bug can lead to unnecessary repeated scanning of the
same bitmaps; there is a risk that future changes will turn this into an
endless loop.
Fixes:
e579ed4f44 ("GFS2: Introduce rbm field bii")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Mon, 26 Nov 2018 17:45:35 +0000 (18:45 +0100)]
gfs2: Get rid of potential double-freeing in gfs2_create_inode
commit
6ff9b09e00a441599f3aacdf577254455a048bc9 upstream.
In gfs2_create_inode, after setting and releasing the acl / default_acl, the
acl / default_acl pointers are not set to NULL as they should be. In that
state, when the function reaches label fail_free_acls, gfs2_create_inode will
try to release the same acls again.
Fix that by setting the pointers to NULL after releasing the acls. Slightly
simplify the logic. Also, posix_acl_release checks for NULL already, so
there is no need to duplicate those checks here.
Fixes:
e01580bf9e4d ("gfs2: use generic posix ACL infrastructure")
Reported-by: Pan Bian <bianpan2016@163.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Thu, 15 Nov 2018 10:18:56 +0000 (13:18 +0300)]
dlm: memory leaks on error path in dlm_user_request()
commit
d47b41aceeadc6b58abc9c7c6485bef7cfb75636 upstream.
According to comment in dlm_user_request() ua should be freed
in dlm_free_lkb() after successful attach to lkb.
However ua is attached to lkb not in set_lock_args() but later,
inside request_lock().
Fixes
597d0cae0f99 ("[DLM] dlm: user locks")
Cc: stable@kernel.org # 2.6.19
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Thu, 15 Nov 2018 10:18:24 +0000 (13:18 +0300)]
dlm: lost put_lkb on error path in receive_convert() and receive_unlock()
commit
c0174726c3976e67da8649ac62cae43220ae173a upstream.
Fixes
6d40c4a708e0 ("dlm: improve error and debug messages")
Cc: stable@kernel.org # 3.5
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Thu, 15 Nov 2018 10:18:18 +0000 (13:18 +0300)]
dlm: possible memory leak on error path in create_lkb()
commit
23851e978f31eda8b2d01bd410d3026659ca06c7 upstream.
Fixes
3d6aa675fff9 ("dlm: keep lkbs in idr")
Cc: stable@kernel.org # 3.1
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Thu, 15 Nov 2018 10:15:05 +0000 (13:15 +0300)]
dlm: fixed memory leaks after failed ls_remove_names allocation
commit
b982896cdb6e6a6b89d86dfb39df489d9df51e14 upstream.
If allocation fails on last elements of array need to free already
allocated elements.
v2: just move existing out_rsbtbl label to right place
Fixes
789924ba635f ("dlm: fix race between remove and lookup")
Cc: stable@kernel.org # 3.6
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hui Peng [Tue, 25 Dec 2018 23:11:52 +0000 (18:11 -0500)]
ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirks
commit
cbb2ebf70daf7f7d97d3811a2ff8e39655b8c184 upstream.
In `create_composite_quirk`, the terminating condition of for loops is
`quirk->ifnum < 0`. So any composite quirks should end with `struct
snd_usb_audio_quirk` object with ifnum < 0.
for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) {
.....
}
the data field of Bower's & Wilkins PX headphones usb device device quirks
do not end with {.ifnum = -1}, wihch may result in out-of-bound read.
This Patch fix the bug by adding an ending quirk object.
Fixes:
240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones")
Signed-off-by: Hui Peng <benquike@163.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 19 Dec 2018 11:36:27 +0000 (12:36 +0100)]
ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit()
commit
f4351a199cc120ff9d59e06d02e8657d08e6cc46 upstream.
The parser for the processing unit reads bNrInPins field before the
bLength sanity check, which may lead to an out-of-bound access when a
malformed descriptor is given. Fix it by assignment after the bLength
check.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 8 Jan 2019 07:43:30 +0000 (10:43 +0300)]
ALSA: cs46xx: Potential NULL dereference in probe
commit
1524f4e47f90b27a3ac84efbdd94c63172246a6f upstream.
The "chip->dsp_spos_instance" can be NULL on some of the ealier error
paths in snd_cs46xx_create().
Reported-by: "Yavuz, Tuba" <tuba@ece.ufl.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Fri, 30 Nov 2018 06:31:48 +0000 (15:31 +0900)]
dm zoned: Fix target BIO completion handling
commit
d57f9da890696af1484f4a47f7f123560197865a upstream.
struct bioctx includes the ref refcount_t to track the number of I/O
fragments used to process a target BIO as well as ensure that the zone
of the BIO is kept in the active state throughout the lifetime of the
BIO. However, since decrementing of this reference count is done in the
target .end_io method, the function bio_endio() must be called multiple
times for read and write target BIOs, which causes problems with the
value of the __bi_remaining struct bio field for chained BIOs (e.g. the
clone BIO passed by dm core is large and splits into fragments by the
block layer), resulting in incorrect values and inconsistencies with the
BIO_CHAIN flag setting. This is turn triggers the BUG_ON() call:
BUG_ON(atomic_read(&bio->__bi_remaining) <= 0);
in bio_remaining_done() called from bio_endio().
Fix this ensuring that bio_endio() is called only once for any target
BIO by always using internal clone BIOs for processing any read or
write target BIO. This allows reference counting using the target BIO
context counter to trigger the target BIO completion bio_endio() call
once all data, metadata and other zone work triggered by the BIO
complete.
Overall, this simplifies the code too as the target .end_io becomes
unnecessary and differences between read and write BIO issuing and
completion processing disappear.
Fixes:
3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Wed, 22 Aug 2018 16:45:51 +0000 (12:45 -0400)]
dm verity: fix crash on bufio buffer that was allocated with vmalloc
commit
e4b069e0945fa14c71cf8b5b89f8b1b2aa68dbc2 upstream.
Since commit
d1ac3ff008fb ("dm verity: switch to using asynchronous hash
crypto API") dm-verity uses asynchronous crypto calls for verification,
so that it can use hardware with asynchronous processing of crypto
operations.
These asynchronous calls don't support vmalloc memory, but the buffer data
can be allocated with vmalloc if dm-bufio is short of memory and uses a
reserved buffer that was preallocated in dm_bufio_client_create().
Fix verity_hash_update() so that it deals with vmalloc'd memory
correctly.
Reported-by: "Xiao, Jin" <jin.xiao@intel.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes:
d1ac3ff008fb ("dm verity: switch to using asynchronous hash crypto API")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Hajnoczi [Thu, 9 Nov 2017 13:29:10 +0000 (13:29 +0000)]
vhost/vsock: fix uninitialized vhost_vsock->guest_cid
commit
a72b69dc083a931422cc8a5e33841aff7d5312f2 upstream.
The vhost_vsock->guest_cid field is uninitialized when /dev/vhost-vsock
is opened until the VHOST_VSOCK_SET_GUEST_CID ioctl is called.
kvmalloc(..., GFP_KERNEL | __GFP_RETRY_MAYFAIL) does not zero memory.
All other vhost_vsock fields are initialized explicitly so just
initialize this field too.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Stanley [Fri, 2 Nov 2018 00:44:55 +0000 (11:14 +1030)]
raid6/ppc: Fix build for clang
commit
e213574a449f7a57d4202c1869bbc7680b6b5521 upstream.
We cannot build these files with clang as it does not allow altivec
instructions in assembly when -msoft-float is passed.
Jinsong Ji <jji@us.ibm.com> wrote:
> We currently disable Altivec/VSX support when enabling soft-float. So
> any usage of vector builtins will break.
>
> Enable Altivec/VSX with soft-float may need quite some clean up work, so
> I guess this is currently a limitation.
>
> Removing -msoft-float will make it work (and we are lucky that no
> floating point instructions will be generated as well).
This is a workaround until the issue is resolved in clang.
Link: https://bugs.llvm.org/show_bug.cgi?id=31177
Link: https://github.com/ClangBuiltLinux/linux/issues/239
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[nc: Use 'ifeq ($(cc-name),clang)' instead of 'ifdef CONFIG_CC_IS_CLANG'
because that config does not exist in 4.14; the Kconfig rewrite
that added that config happened in 4.18]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Stanley [Mon, 12 Nov 2018 04:21:16 +0000 (14:51 +1030)]
powerpc/boot: Set target when cross-compiling for clang
commit
813af51f5d30a2da6a2523c08465f9726e51772e upstream.
Clang needs to be told which target it is building for when cross
compiling.
Link: https://github.com/ClangBuiltLinux/linux/issues/259
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Daniel Axtens <dja@axtens.net> # powerpc 64-bit BE
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[nc: Use 'ifeq ($(cc-name),clang)' instead of 'ifdef CONFIG_CC_IS_CLANG'
because that config does not exist in 4.14; the Kconfig rewrite
that added that config happened in 4.18]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Stanley [Mon, 12 Nov 2018 04:21:15 +0000 (14:51 +1030)]
Makefile: Export clang toolchain variables
commit
3bd9805090af843b25f97ffe5049f20ade1d86d6 upstream.
The powerpc makefile will use these in it's boot wrapper.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Tue, 6 Nov 2018 03:04:55 +0000 (12:04 +0900)]
kbuild: consolidate Clang compiler flags
commit
238bcbc4e07fad2fff99c5b157d0c37ccd4d093c upstream.
Collect basic Clang options such as --target, --prefix, --gcc-toolchain,
-no-integrated-as into a single variable CLANG_FLAGS so that it can be
easily reused in other parts of Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Tue, 6 Nov 2018 03:04:54 +0000 (12:04 +0900)]
kbuild: add -no-integrated-as Clang option unconditionally
commit
dbe27a002ef8573168cb64e181458ea23a74e2b6 upstream.
We are still a way off the Clang's integrated assembler support for
the kernel. Hence, -no-integrated-as is mandatory to build the kernel
with Clang. If you had an ancient version of Clang that does not
recognize this option, you would not be able to compile the kernel
anyway.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Thu, 5 Oct 2017 18:28:47 +0000 (11:28 -0700)]
md: raid10: remove VLAIS
commit
584ed9fa9532f8b9d5955628ff87ee3b2ab9f5a9 upstream.
The raid10 driver can't be built with clang since it uses a variable
length array in a structure (VLAIS):
drivers/md/raid10.c:4583:17: error: fields must have a constant size:
'variable length array in structure' extension will never be supported
Allocate the r10bio struct with kmalloc instead of using the VLAIS
construct.
Shaohua: set the MD_RECOVERY_INTR bit
Neil Brown: use GFP_NOIO
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Stanley [Mon, 17 Sep 2018 07:37:54 +0000 (17:07 +0930)]
ftrace: Build with CPPFLAGS to get -Qunused-arguments
When building to record the mcount locations the kernel uses
KBUILD_CFLAGS but not KBUILD_CPPFLAGS. This means it lacks
-Qunused-arguments when building with clang, resulting in a lot of
noisy warnings.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[nc: Fix conflicts due to lack of
87a32e624037 and
d503ac531a52]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Stanley [Mon, 17 Sep 2018 07:46:21 +0000 (17:16 +0930)]
powerpc: Disable -Wbuiltin-requires-header when setjmp is used
commit
aea447141c7e7824b81b49acd1bc785506fba46e upstream.
The powerpc kernel uses setjmp which causes a warning when building
with clang:
In file included from arch/powerpc/xmon/xmon.c:51:
./arch/powerpc/include/asm/setjmp.h:15:13: error: declaration of
built-in function 'setjmp' requires inclusion of the header <setjmp.h>
[-Werror,-Wbuiltin-requires-header]
extern long setjmp(long *);
^
./arch/powerpc/include/asm/setjmp.h:16:13: error: declaration of
built-in function 'longjmp' requires inclusion of the header <setjmp.h>
[-Werror,-Wbuiltin-requires-header]
extern void longjmp(long *, long);
^
This *is* the header and we're not using the built-in setjump but
rather the one in arch/powerpc/kernel/misc.S. As the compiler warning
does not make sense, it for the files where setjmp is used.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
[mpe: Move subdir-ccflags in xmon/Makefile to not clobber -Werror]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Fri, 14 Sep 2018 05:08:54 +0000 (15:08 +1000)]
powerpc: avoid -mno-sched-epilog on GCC 4.9 and newer
commit
6977f95e63b9b3fb4a5973481a800dd9f48a1338 upstream.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[nc: Adjust context due to lack of
f2910f0e6835 and
2a056f58fd33]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Mon, 24 Dec 2018 11:44:42 +0000 (14:44 +0300)]
sunrpc: use SVC_NET() in svcauth_gss_* functions
commit
b8be5674fa9a6f3677865ea93f7803c4212f3e10 upstream.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Wed, 28 Nov 2018 08:45:57 +0000 (11:45 +0300)]
sunrpc: fix cache_head leak due to queued request
commit
4ecd55ea074217473f94cfee21bb72864d39f8d7 upstream.
After commit
d202cce8963d, an expired cache_head can be removed from the
cache_detail's hash.
However, the expired cache_head may be waiting for a reply from a
previously submitted request. Such a cache_head has an increased
refcounter and therefore it won't be freed after cache_put(freeme).
Because the cache_head was removed from the hash it cannot be found
during cache_clean() and can be leaked forever, together with stalled
cache_request and other taken resources.
In our case we noticed it because an entry in the export cache was
holding a reference on a filesystem.
Fixes
d202cce8963d ("sunrpc: never return expired entries in sunrpc_cache_lookup")
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: stable@kernel.org # 2.6.35
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huang Ying [Fri, 28 Dec 2018 08:39:53 +0000 (00:39 -0800)]
mm, swap: fix swapoff with KSM pages
commit
7af7a8e19f0c5425ff639b0f0d2d244c2a647724 upstream.
KSM pages may be mapped to the multiple VMAs that cannot be reached from
one anon_vma. So during swapin, a new copy of the page need to be
generated if a different anon_vma is needed, please refer to comments of
ksm_might_need_to_copy() for details.
During swapoff, unuse_vma() uses anon_vma (if available) to locate VMA and
virtual address mapped to the page, so not all mappings to a swapped out
KSM page could be found. So in try_to_unuse(), even if the swap count of
a swap entry isn't zero, the page needs to be deleted from swap cache, so
that, in the next round a new page could be allocated and swapin for the
other mappings of the swapped out KSM page.
But this contradicts with the THP swap support. Where the THP could be
deleted from swap cache only after the swap count of every swap entry in
the huge swap cluster backing the THP has reach 0. So try_to_unuse() is
changed in commit
e07098294adf ("mm, THP, swap: support to reclaim swap
space for THP swapped out") to check that before delete a page from swap
cache, but this has broken KSM swapoff too.
Fortunately, KSM is for the normal pages only, so the original behavior
for KSM pages could be restored easily via checking PageTransCompound().
That is how this patch works.
The bug is introduced by
e07098294adf ("mm, THP, swap: support to reclaim
swap space for THP swapped out"), which is merged by v4.14-rc1. So I
think we should backport the fix to from 4.14 on. But Hugh thinks it may
be rare for the KSM pages being in the swap device when swapoff, so nobody
reports the bug so far.
Link: http://lkml.kernel.org/r/20181226051522.28442-1-ying.huang@intel.com
Fixes:
e07098294adf ("mm, THP, swap: support to reclaim swap space for THP swapped out")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Tested-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Fri, 28 Dec 2018 08:35:15 +0000 (00:35 -0800)]
mm, hmm: mark hmm_devmem_{add, add_resource} EXPORT_SYMBOL_GPL
commit
02917e9f8676207a4c577d4d94eae12bf348e9d7 upstream.
At Maintainer Summit, Greg brought up a topic I proposed around
EXPORT_SYMBOL_GPL usage. The motivation was considerations for when
EXPORT_SYMBOL_GPL is warranted and the criteria for taking the exceptional
step of reclassifying an existing export. Specifically, I wanted to make
the case that although the line is fuzzy and hard to specify in abstract
terms, it is nonetheless clear that devm_memremap_pages() and HMM
(Heterogeneous Memory Management) have crossed it. The
devm_memremap_pages() facility should have been EXPORT_SYMBOL_GPL from the
beginning, and HMM as a derivative of that functionality should have
naturally picked up that designation as well.
Contrary to typical rules, the HMM infrastructure was merged upstream with
zero in-tree consumers. There was a promise at the time that those users
would be merged "soon", but it has been over a year with no drivers
arriving. While the Nouveau driver is about to belatedly make good on
that promise it is clear that HMM was targeted first and foremost at an
out-of-tree consumer.
HMM is derived from devm_memremap_pages(), a facility Christoph and I
spearheaded to support persistent memory. It combines a device lifetime
model with a dynamically created 'struct page' / memmap array for any
physical address range. It enables coordination and control of the many
code paths in the kernel built to interact with memory via 'struct page'
objects. With HMM the integration goes even deeper by allowing device
drivers to hook and manipulate page fault and page free events.
One interpretation of when EXPORT_SYMBOL is suitable is when it is
exporting stable and generic leaf functionality. The
devm_memremap_pages() facility continues to see expanding use cases,
peer-to-peer DMA being the most recent, with no clear end date when it
will stop attracting reworks and semantic changes. It is not suitable to
export devm_memremap_pages() as a stable 3rd party driver API due to the
fact that it is still changing and manipulates core behavior. Moreover,
it is not in the best interest of the long term development of the core
memory management subsystem to permit any external driver to effectively
define its own system-wide memory management policies with no
encouragement to engage with upstream.
I am also concerned that HMM was designed in a way to minimize further
engagement with the core-MM. That, with these hooks in place,
device-drivers are free to implement their own policies without much
consideration for whether and how the core-MM could grow to meet that
need. Going forward not only should HMM be EXPORT_SYMBOL_GPL, but the
core-MM should be allowed the opportunity and stimulus to change and
address these new use cases as first class functionality.
Original changelog:
hmm_devmem_add(), and hmm_devmem_add_resource() duplicated
devm_memremap_pages() and are now simple now wrappers around the core
facility to inject a dev_pagemap instance into the global pgmap_radix and
hook page-idle events. The devm_memremap_pages() interface is base
infrastructure for HMM. HMM has more and deeper ties into the kernel
memory management implementation than base ZONE_DEVICE which is itself a
EXPORT_SYMBOL_GPL facility.
Originally, the HMM page structure creation routines copied the
devm_memremap_pages() code and reused ZONE_DEVICE. A cleanup to unify the
implementations was discussed during the initial review:
http://lkml.iu.edu/hypermail/linux/kernel/1701.2/00812.html Recent work to
extend devm_memremap_pages() for the peer-to-peer-DMA facility enabled
this cleanup to move forward.
In addition to the integration with devm_memremap_pages() HMM depends on
other GPL-only symbols:
mmu_notifier_unregister_no_release
percpu_ref
region_intersects
__class_create
It goes further to consume / indirectly expose functionality that is not
exported to any other driver:
alloc_pages_vma
walk_page_range
HMM is derived from devm_memremap_pages(), and extends deep core-kernel
fundamentals. Similar to devm_memremap_pages(), mark its entry points
EXPORT_SYMBOL_GPL().
[logang@deltatee.com: PCI/P2PDMA: match interface changes to devm_memremap_pages()]
Link: http://lkml.kernel.org/r/20181130225911.2900-1-logang@deltatee.com
Link: http://lkml.kernel.org/r/154275560565.76910.15919297436557795278.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>,
Cc: Michal Hocko <mhocko@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Fri, 28 Dec 2018 08:35:07 +0000 (00:35 -0800)]
mm, hmm: use devm semantics for hmm_devmem_{add, remove}
commit
58ef15b765af0d2cbe6799ec564f1dc485010ab8 upstream.
devm semantics arrange for resources to be torn down when
device-driver-probe fails or when device-driver-release completes.
Similar to devm_memremap_pages() there is no need to support an explicit
remove operation when the users properly adhere to devm semantics.
Note that devm_kzalloc() automatically handles allocating node-local
memory.
Link: http://lkml.kernel.org/r/154275559545.76910.9186690723515469051.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>