powerpc/iommu: fix memory leak with using debugfs_lookup()

[ Upstream commit b505063910c134778202dfad9332dfcecb76bab3 ]

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230202141919.2298821-1-gregkh@linuxfoundation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64: Don't recurse irq replay

[ Upstream commit 5746ca131e2496ccd5bb4d7a0244d6c38070cbf5 ]

Interrupt handlers called by soft-pending irq replay code can run
softirqs, softirq replay enables and disables local irqs, which allows
interrupts to come in including soft-masked interrupts, and it can
cause pending irqs to be replayed again. That makes the soft irq replay
state machine and possible races more complicated and fragile than it
needs to be.

Use irq_enter/irq_exit around irq replay to prevent softirqs running
while interrupts are being replayed. Softirqs will now be run at the
irq_exit() call after all the irq replaying is done. This prevents irqs
being replayed while irqs are being replayed, and should hopefully make
things simpler and easier to think about and debug.

A new PACA_IRQ_REPLAYING is added to prevent asynchronous interrupt
handlers hard-enabling EE while pending irqs are being replayed, because
that causes new pending irqs to arrive which is also a complexity. This
means pending irqs won't be profiled quite so well because perf irqs
can't be taken.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121102618.2824429-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Fix a compilation issue

[ Upstream commit 109d587a4b4d7ccca2200ab1f808f43ae23e2585 ]

arch/mips/include/asm/mach-rc32434/pci.h:377:
cc1: error: result of ‘-117440512 << 16’ requires 44 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]

All bits in KORINA_STAT are already at the correct position, so there is
no addtional shift needed.

Signed-off-by: xurui <xurui@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

[ Upstream commit 80a6c216b16d7f5c584d2148c2e4345ea4eb06ce ]

tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.

Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.

The following hardware was used to test this issue:
    Framework Laptop (Pre-production)
    BIOS: INSYDE Corp, Revision: 3.2
    TPM Device: NTC, Firmware Revision: 7.2

Dump of the faulty ACPI TPM2 table:
    [000h 0000   4]                    Signature : "TPM2"    [Trusted Platform Module hardware interface Table]
    [004h 0004   4]                 Table Length : 0000004C
    [008h 0008   1]                     Revision : 04
    [009h 0009   1]                     Checksum : 2B
    [00Ah 0010   6]                       Oem ID : "INSYDE"
    [010h 0016   8]                 Oem Table ID : "TGL-ULT"
    [018h 0024   4]                 Oem Revision : 00000002
    [01Ch 0028   4]              Asl Compiler ID : "ACPI"
    [020h 0032   4]        Asl Compiler Revision : 00040000

    [024h 0036   2]               Platform Class : 0000
    [026h 0038   2]                     Reserved : 0000
    [028h 0040   8]              Control Address : 0000000000000000
    [030h 0048   4]                 Start Method : 06 [Memory Mapped I/O]

    [034h 0052  12]            Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
    [040h 0064   4]           Minimum Log Length : 00010000
    [044h 0068   8]                  Log Address : 000000004053D000

Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths

[ Upstream commit 03e1d60e177eedbd302b77af4ea5e21b5a7ade31 ]

The watch_queue_set_size() allocation error paths return the ret value
set via the prior pipe_resize_ring() call, which will always be zero.

As a result, IOC_WATCH_QUEUE_SET_SIZE callers such as "keyctl watch"
fail to detect kernel wqueue->notes allocation failures and proceed to
KEYCTL_WATCH_KEY, with any notifications subsequently lost.

Fixes: c73be61cede58 ("pipe: Add general notification queue support")
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/adreno: fix runtime PM imbalance at unbind

[ Upstream commit 6153c44392b04ff2da1e9aa82ba87da9ab9a0fc1 ]

A recent commit moved enabling of runtime PM from adreno_gpu_init() to
adreno_load_gpu() (called on first open()), which means that unbind()
may now be called with runtime PM disabled in case the device was never
opened in between.

Make sure to only forcibly suspend and disable runtime PM at unbind() in
case runtime PM has been enabled to prevent a disable count imbalance.

This specifically avoids leaving runtime PM disabled when the device
is later opened after a successful bind:

msm_dpu ae01000.display-controller: [drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -13

Fixes: 4b18299b3365 ("drm/msm/adreno: Defer enabling runpm until hw_init()")
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/lkml/20230203181245.3523937-1-quic_bjorande@quicinc.com
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/523549/
Link: https://lore.kernel.org/r/20230221101430.14546-2-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

adreno: Shutdown the GPU properly

[ Upstream commit e752e5454e6417da3f40ec1306a041ea96c56423 ]

During kexec on ARM device, we notice that device_shutdown() only calls
pm_runtime_force_suspend() while shutting down the GPU. This means the GPU
kthread is still running and further, there maybe active submits.

This causes all kinds of issues during a kexec reboot:

Warning from shutdown path:

[  292.509662] WARNING: CPU: 0 PID: 6304 at [...] adreno_runtime_suspend+0x3c/0x44
[  292.509863] Hardware name: Google Lazor (rev3 - 8) with LTE (DT)
[  292.509872] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  292.509881] pc : adreno_runtime_suspend+0x3c/0x44
[  292.509891] lr : pm_generic_runtime_suspend+0x30/0x44
[  292.509905] sp : ffffffc014473bf0
[...]
[  292.510043] Call trace:
[  292.510051]  adreno_runtime_suspend+0x3c/0x44
[  292.510061]  pm_generic_runtime_suspend+0x30/0x44
[  292.510071]  pm_runtime_force_suspend+0x54/0xc8
[  292.510081]  adreno_shutdown+0x1c/0x28
[  292.510090]  platform_shutdown+0x2c/0x38
[  292.510104]  device_shutdown+0x158/0x210
[  292.510119]  kernel_restart_prepare+0x40/0x4c

And here from GPU kthread, an SError OOPs:

[  192.648789]  el1h_64_error+0x7c/0x80
[  192.648812]  el1_interrupt+0x20/0x58
[  192.648833]  el1h_64_irq_handler+0x18/0x24
[  192.648854]  el1h_64_irq+0x7c/0x80
[  192.648873]  local_daif_inherit+0x10/0x18
[  192.648900]  el1h_64_sync_handler+0x48/0xb4
[  192.648921]  el1h_64_sync+0x7c/0x80
[  192.648941]  a6xx_gmu_set_oob+0xbc/0x1fc
[  192.648968]  a6xx_hw_init+0x44/0xe38
[  192.648991]  msm_gpu_hw_init+0x48/0x80
[  192.649013]  msm_gpu_submit+0x5c/0x1a8
[  192.649034]  msm_job_run+0xb0/0x11c
[  192.649058]  drm_sched_main+0x170/0x434
[  192.649086]  kthread+0x134/0x300
[  192.649114]  ret_from_fork+0x10/0x20

Fix by calling adreno_system_suspend() in the device_shutdown() path.

[ Applied Rob Clark feedback on fixing adreno_unbind() similarly, also
  tested as above. ]

Cc: Rob Clark <robdclark@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ricardo Ribalda <ribalda@chromium.org>
Cc: Ross Zwisler <zwisler@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/517633/
Link: https://lore.kernel.org/r/20230109222547.1368644-1-joel@joelfernandes.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Stable-dep-of: 6153c44392b0 ("drm/msm/adreno: fix runtime PM imbalance at unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4

[ Upstream commit 6ce2ea07c5ff0a8188eab0e5cd1f0e4899b36835 ]

Added the video capability query support for VCN version 4_0_4

Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/soc21: don't expose AV1 if VCN0 is harvested

[ Upstream commit a6de636eb04f146d23644dbbb7173e142452a9b7 ]

Only VCN0 supports AV1.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 6ce2ea07c5ff ("drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: Fix deadlock during directory rename

[ Upstream commit 3c92792da8506a295afb6d032b4476e46f979725 ]

As lockdep properly warns, we should not be locking i_rwsem while having
transactions started as the proper lock ordering used by all directory
handling operations is i_rwsem -> transaction start. Fix the lock
ordering by moving the locking of the directory earlier in
ext4_rename().

Reported-by: syzbot+9d16c39efb5fade84574@syzkaller.appspotmail.com
Fixes: 0813299c586b ("ext4: Fix possible corruption when moving a directory")
Link: https://syzkaller.appspot.com/bug?extid=9d16c39efb5fade84574
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230301141004.15087-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix return value check in kfd

[ Upstream commit 20534dbcc7b7bfb447279cdcfb0d88ee3b779a18 ]

This patch fixes a return value check in kfd doorbell handling.
This function should return 0(error) only when the ida_simple_get
returns < 0(error), return > 0 is a success case.

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: 16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed")
Acked-by: Christian Koenig <chriatian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: Don't check text_mutex during stop_machine

[ Upstream commit 2a8db5ec4a28a0fce822d10224db9471a44b6925 ]

We're currently using stop_machine() to update ftrace & kprobes, which
means that the thread that takes text_mutex during may not be the same
as the thread that eventually patches the code.  This isn't actually a
race because the lock is still held (preventing any other concurrent
accesses) and there is only one thread running during stop_machine(),
but it does trigger a lockdep failure.

This patch just elides the lockdep check during stop_machine.

Fixes: c15ac4fd60d5 ("riscv/ftrace: Add dynamic function tracer support")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230303143754.4005217-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode

[ Upstream commit 76950340cf03b149412fe0d5f0810e52ac1df8cb ]

When CONFIG_FRAME_POINTER is unset, the stack unwinding function
walk_stackframe randomly reads the stack and then, when KASAN is enabled,
it can lead to the following backtrace:

[    0.000000] ==================================================================
[    0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a
[    0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0
[    0.000000]
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43
[    0.000000] Hardware name: riscv-virtio,qemu (DT)
[    0.000000] Call Trace:
[    0.000000] [<ffffffff80007ba8>] walk_stackframe+0x0/0x11a
[    0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff80c49c80>] dump_stack_lvl+0x22/0x36
[    0.000000] [<ffffffff80c3783e>] print_report+0x198/0x4a8
[    0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff8015f68a>] kasan_report+0x9a/0xc8
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff8006e99c>] desc_make_final+0x80/0x84
[    0.000000] [<ffffffff8009a04e>] stack_trace_save+0x88/0xa6
[    0.000000] [<ffffffff80099fc2>] filter_irq_stacks+0x72/0x76
[    0.000000] [<ffffffff8006b95e>] devkmsg_read+0x32a/0x32e
[    0.000000] [<ffffffff8015ec16>] kasan_save_stack+0x28/0x52
[    0.000000] [<ffffffff8006e998>] desc_make_final+0x7c/0x84
[    0.000000] [<ffffffff8009a04a>] stack_trace_save+0x84/0xa6
[    0.000000] [<ffffffff8015ec52>] kasan_set_track+0x12/0x20
[    0.000000] [<ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e
[    0.000000] [<ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a
[    0.000000] [<ffffffff80e133ac>] create_boot_cache+0x70/0x9c
[    0.000000] [<ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e
[    0.000000] [<ffffffff80e00fd6>] mm_init+0xd8/0xfe
[    0.000000] [<ffffffff80e011d8>] start_kernel+0x190/0x3ca
[    0.000000]
[    0.000000] The buggy address belongs to stack of task swapper/0
[    0.000000]  and is located at offset 0 in frame:
[    0.000000]  stack_trace_save+0x0/0xa6
[    0.000000]
[    0.000000] This frame has 1 object:
[    0.000000]  [32, 56) 'c'
[    0.000000]
[    0.000000] The buggy address belongs to the physical page:
[    0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07
[    0.000000] flags: 0x1000(reserved|zone=0)
[    0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000
[    0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff
[    0.000000] page dumped because: kasan: bad access detected
[    0.000000]
[    0.000000] Memory state around the buggy address:
[    0.000000]  ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000]  ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3
[    0.000000]                                            ^
[    0.000000]  ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000]  ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000] ==================================================================

Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise
mode.

Fixes: 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
Reported-by: Chathura Rajapaksha <chathura.abeyrathne.lk@gmail.com>
Link: https://lore.kernel.org/all/CAD7mqryDQCYyJ1gAmtMm8SASMWAQ4i103ptTb0f6Oda=tPY2=A@mail.gmail.com/
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230308091639.602024-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"

[ Upstream commit 647dd2c3f0e16b71a1a77897d038164d48eea154 ]

Let's revert commit 12724ba38992 ("erofs: fix kvcalloc() misuse with
__GFP_NOFAIL") since kvmalloc() already supports __GFP_NOFAIL in commit
a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc").  So
the original fix was wrong.

Actually there was some issue as [1] discussed, so before that mm fix
is landed, the warn could still happen but applying this commit first
will cause less.

[1] https://lore.kernel.org/r/20230305053035.1911-1-hsiangkao@linux.alibaba.com

Fixes: 12724ba38992 ("erofs: fix kvcalloc() misuse with __GFP_NOFAIL")
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230309053148.9223-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_unix: fix struct pid leaks in OOB support

[ Upstream commit 2aab4b96900272885bc157f8b236abf1cdc02e08 ]

syzbot reported struct pid leak [1].

Issue is that queue_oob() calls maybe_add_creds() which potentially
holds a reference on a pid.

But skb->destructor is not set (either directly or by calling
unix_scm_to_skb())

This means that subsequent kfree_skb() or consume_skb() would leak
this reference.

In this fix, I chose to fully support scm even for the OOB message.

[1]
BUG: memory leak
unreferenced object 0xffff8881053e7f80 (size 128):
comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180
[<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285
[<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684
[<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825
[<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
[<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: syzbot+7699d9e5635c10253a27@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rao Shoaib <rao.shoaib@oracle.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230307164530.771896-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC

[ Upstream commit c8b8a3c601f2cfad25ab5ce5b04df700048aef6e ]

The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as
internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5
receives corrupted frames, unless port 6 (attached to GMAC0) has been
brought up by the driver. This is true regardless of whether port 5 is
used as a user port or as a CPU port (carrying DSA tags).

Offline debugging (blind for me) which began in the linked thread showed
experimentally that the configuration done by the driver for port 6
contains a step which is needed by port 5 as well - the write to
CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from
the comment "Set core clock into 500Mhz"). Prints put by Arınç show that
the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) |
RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the
MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi
BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both
values of the register, while on the MT7621 SoC it cannot.

The call path that triggers the register write is:

mt753x_phylink_mac_config() for port 6
-> mt753x_pad_setup()
   -> mt7530_pad_clk_setup()

so this fully explains the behavior noticed by Arınç, that bringing port
6 up is necessary.

The simplest fix for the problem is to extract the register writes which
are needed for both port 5 and 6 into a common mt7530_pll_setup()
function, which is called at mt7530_setup() time, immediately after
switch reset. We can argue that this mirrors the code layout introduced
in mt7531_setup() by commit 42bc4fafe359 ("net: mt7531: only do PLL once
after the reset"), in that the PLL setup has the exact same positioning,
and further work to consolidate the separate setup() functions is not
hindered.

Testing confirms that:

- the slight reordering of writes to MT7530_P6ECR and to
  CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not
  appear to cause problems for the operation of port 6 on MT7621 and on
  MT7623 (where port 5 also always worked)

- packets sent through port 5 are not corrupted anymore, regardless of
  whether port 6 is enabled by phylink or not (or even present in the
  device tree)

My algorithm for determining the Fixes: tag is as follows. Testing shows
that some logic from mt7530_pad_clk_setup() is needed even for port 5.
Prior to commit ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK
API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so
port 5 included. That commit replaced it with a temporary "Port 5 is not
supported!" comment, and the following commit 38f790a80560 ("net: dsa:
mt7530: Add support for port 5") replaced that comment with a
configuration procedure in mt7530_setup_port5() which was insufficient
for port 5 to work. I'm laying the blame on the patch that claimed
support for port 5, although one would have also needed the change from
commit c3b8e07909db ("net: dsa: mt7530: setup core clock even in TRGMII
mode") for the write to be performed completely independently from port
6's configuration.

Thanks go to Arınç for describing the problem, for debugging and for
testing.

Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/netdev/f297c2c4-6e7c-57ac-2394-f6025d309b9d@arinc9.com/
Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230307155411.868573-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix a server shutdown leak

[ Upstream commit 9ca6705d9d609441d34f8b853e1e4a6369b3b171 ]

Fix a race where kthread_stop() may prevent the threadfn from ever getting
called.  If that happens the svc_rqst will not be cleaned up.

Fixes: ed6473ddc704 ("NFSv4: Fix callback server shutdown")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Unlock contexts in the queue context cache in case of fault detection

[ Upstream commit ea9dd2e5c6d12c8b65ce7514c8359a70eeaa0e70 ]

NDC caches contexts of frequently used queue's (Rx and Tx queues)
contexts. Due to a HW errata when NDC detects fault/poision while
accessing contexts it could go into an illegal state where a cache
line could get locked forever. To makesure all cache lines in NDC
are available for optimum performance upon fault/lockerror/posion
errors scan through all cache lines in NDC and clear the lock bit.

Fixes: 4a3581cd5995 ("octeontx2-af: NPA AQ instruction enqueue support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix fallback failed while sendmsg with fastopen

[ Upstream commit ce7ca794712f186da99719e8b4e97bd5ddbb04c3 ]

Before determining whether the msg has unsupported options, it has been
prematurely terminated by the wrong status check.

For the application, the general usages of MSG_FASTOPEN likes

fd = socket(...)
/* rather than connect */
sendto(fd, data, len, MSG_FASTOPEN)

Hence, We need to check the flag before state check, because the sock
state here is always SMC_INIT when applications tries MSG_FASTOPEN.
Once we found unsupported options, fallback it to TCP.

Fixes: ee9dfbef02d1 ("net/smc: handle sockopts forcing fallback")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
v2 -> v1: Optimize code style
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethernet: ice: avoid gcc-9 integer overflow warning

[ Upstream commit 8f5c5a790e3025d6eca96bf7ee5e3873dc92373f ]

With older compilers like gcc-9, the calculation of the vlan
priority field causes a false-positive warning from the byteswap:

In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4:
drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower':
include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow]
   15 |  (((__u16)(x) & (__u16)0x00ffU) << 8) |   \
      |   ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16'
  106 |  ___constant_swab16(x) :   \
      |  ^~~~~~~~~~~~~~~~~~
include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16'
   42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
      |                                           ^~~~~~~~
include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16'
   96 | #define cpu_to_be16 __cpu_to_be16
      |                     ^~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16'
 1458 |     cpu_to_be16((match.key->vlan_priority <<
      |     ^~~~~~~~~~~

After a change to be16_encode_bits(), the code becomes more
readable to both people and compilers, which avoids the warning.

Fixes: 34800178b302 ("ice: Add support for VLAN priority filters in switchdev")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix DSCP PFC TLV creation

[ Upstream commit fef3f92e8a4214652d8f33f50330dc5a92efbf11 ]

When creating the TLV to send to the FW for configuring DSCP mode PFC,the
PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8
bit bitmask for enabled classes for PFC.  This means that traffic classes
4-7 could not be enabled for PFC.

Remove the mask completely, as it is not necessary, as we are assigning 8
bits to an 8 bit field.

Fixes: 2a87bd73e50d ("ice: Add DSCP support")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Protect against filesystem freezing

[ Upstream commit fd9a2e1d513823e840960cb3bc26d8b7749d4ac2 ]

Flole observes this WARNING on occasion:

[1210423.486503] WARNING: CPU: 8 PID: 1524732 at fs/ext4/ext4_jbd2.c:75 ext4_journal_check_start+0x68/0xb0

Reported-by: <flole@flole.de>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217123
Fixes: 73da852e3831 ("nfsd: use vfs_iter_read/write")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: fix wrong mode for blkdev_put() from disk_scan_partitions()

[ Upstream commit 428913bce1e67ccb4dae317fd0332545bf8c9233 ]

If disk_scan_partitions() is called with 'FMODE_EXCL',
blkdev_get_by_dev() will be called without 'FMODE_EXCL', however, follow
blkdev_put() is still called with 'FMODE_EXCL', which will cause
'bd_holders' counter to leak.

Fix the problem by using the right mode for blkdev_put().

Reported-by: syzbot+2bcc0d79e548c4f62a59@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/f9649d501bc8c3444769418f6c26263555d9d3be.camel@linux.ibm.com/T/
Tested-by: Julian Ruess <julianr@linux.ibm.com>
Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it

[ Upstream commit 7e7e1541c91615e9950d0b96bcd1806d297e970e ]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: ef0f62264b2a ("platform/x86: mlx-platform: Add physical bus number auto detection")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-7-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform: mellanox: select REGMAP instead of depending on it

[ Upstream commit 03f5eb300ad1241f854269a3e521b119189a4493 ]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

For NVSW_SN2201, select REGMAP_I2C instead of depending on it.

Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Fixes: 5ec4a8ace06c ("platform/mellanox: Introduce support for Mellanox register access driver")
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Michael Shych <michaelsh@nvidia.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Vadim Pasternak <vadimp@nvidia.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-6-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: adopt safer max chain length

[ Upstream commit c77737b736ceb50fdf150434347dbd81ec76dbb1 ]

Customers using GKE 1.25 and 1.26 are facing conntrack issues
root caused to commit c9c3b6811f74 ("netfilter: conntrack: make
max chain length random").

Even if we assume Uniform Hashing, a bucket often reachs 8 chained
items while the load factor of the hash table is smaller than 0.5

With a limit of 16, we reach load factors of 3.
With a limit of 32, we reach load factors of 11.
With a limit of 40, we reach load factors of 15.
With a limit of 50, we reach load factors of 24.

This patch changes MIN_CHAINLEN to 50, to minimize risks.

Ideally, we could in the future add a cushion based on expected
load factor (2 * nf_conntrack_max / nf_conntrack_buckets),
because some setups might expect unusual values.

Fixes: c9c3b6811f74 ("netfilter: conntrack: make max chain length random")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sd: Fix wrong zone_write_granularity value during revalidate

[ Upstream commit 288b3271d920c9ba949c3bab0f749f4cecc70e09 ]

When the sd driver revalidates host-managed SMR disks, it calls
disk_set_zoned() which changes the zone_write_granularity attribute value
to the logical block size regardless of the device type. After that, the sd
driver overwrites the value in sd_zbc_read_zone() with the physical block
size, since ZBC/ZAC requires this for host-managed disks. Between the calls
to disk_set_zoned() and sd_zbc_read_zone(), there exists a window where the
attribute shows the logical block size as the zone_write_granularity value,
which is wrong for host-managed disks. The duration of the window is from
20ms to 200ms, depending on report zone command execution time.

To avoid the wrong zone_write_granularity value between disk_set_zoned()
and sd_zbc_read_zone(), modify the value not in sd_zbc_read_zone() but
just after disk_set_zoned() call.

Fixes: a805a4fa4fa3 ("block: introduce zone_write_granularity limit")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20230306063024.3376959-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid_sas: Update max supported LD IDs to 240

[ Upstream commit bfa659177dcba48cf13f2bd88c1972f12a60bf1c ]

The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF)
is reserved for deleted LDs. However, in some cases, firmware was assigning
LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the
wrong disk as deleted. This in turn caused the wrong disk device to be
taken offline by the SCSI midlayer.

To address this issue, limit the LD ID range from 255 to 240. This ensures
the deleted LD ID is properly identified and removed by the driver without
accidently deleting any valid LDs.

Fixes: ae6874ba4b43 ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update")
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tls: fix device-offloaded sendpage straddling records

[ Upstream commit e539a105f947b9db470fec39fe91d85fe737a432 ]

Adrien reports that incorrect data is transmitted when a single
page straddles multiple records. We would transmit the same
data in all iterations of the loop.

Reported-by: Adrien Moulin <amoulin@corp.free.fr>
Link: https://lore.kernel.org/all/61481278.42813558.1677845235112.JavaMail.zimbra@corp.free.fr
Fixes: c1318b39c7d3 ("tls: Add opt-in zerocopy mode of sendfile()")
Tested-by: Adrien Moulin <amoulin@corp.free.fr>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230304192610.3818098-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: fix RX data corruption issue

[ Upstream commit 193250ace270fecd586dd2d0dfbd9cbd2ade977f ]

Fix data corruption issue with SerDes connected PHYs operating at 1.25
Gbps speed where we could previously observe about 30% packet loss while
the bad packet counter was increasing.

As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531
switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using
rate-adaptation to 2500Base-X mode, this issue only got exposed now when
we started trying to use SFP modules operating with 1.25 Gbps with the
BananaPi R3 board.

The fix is to set bit 12 which disables the RX FIFO clear function when
setting up MAC MCR, MediaTek SDK did the same change stating:
"If without this patch, kernel might receive invalid packets that are
corrupted by GMAC."[1]

[1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/d8a2975939a12686c4a95c40db21efdc3f821f63

Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: smsc: fix link up detection in forced irq mode

[ Upstream commit 58aac3a2ef414fea6d7fdf823ea177744a087d13 ]

Currently link up can't be detected in forced mode if polling
isn't used. Only link up interrupt source we have is aneg
complete which isn't applicable in forced mode. Therefore we
have to use energy-on as link up indicator.

Fixes: 7365494550f6 ("net: phy: smsc: skip ENERGYON interrupt if disabled")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR

[ Upstream commit 9b459804ff9973e173fabafba2a1319f771e85fa ]

btf_datasec_resolve contains a bug that causes the following BTF
to fail loading:

    [1] DATASEC a size=2 vlen=2
        type_id=4 offset=0 size=1
        type_id=7 offset=1 size=1
    [2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
    [3] PTR (anon) type_id=2
    [4] VAR a type_id=3 linkage=0
    [5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
    [6] TYPEDEF td type_id=5
    [7] VAR b type_id=6 linkage=0

This error message is printed during btf_check_all_types:

    [1] DATASEC a size=2 vlen=2
        type_id=7 offset=1 size=1 Invalid type

By tracing btf_*_resolve we can pinpoint the problem:

    btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0
        btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0
            btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0
        btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0
    btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22

The last invocation of btf_datasec_resolve should invoke btf_var_resolve
by means of env_stack_push, instead it returns EINVAL. The reason is that
env_stack_push is never executed for the second VAR.

    if (!env_type_is_resolve_sink(env, var_type) &&
        !env_type_is_resolved(env, var_type_id)) {
        env_stack_set_next_member(env, i + 1);
        return env_stack_push(env, var_type, var_type_id);
    }

env_type_is_resolve_sink() changes its behaviour based on resolve_mode.
For RESOLVE_PTR, we can simplify the if condition to the following:

    (btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved()

Since we're dealing with a VAR the clause evaluates to false. This is
not sufficient to trigger the bug however. The log output and EINVAL
are only generated if btf_type_id_size() fails.

    if (!btf_type_id_size(btf, &type_id, &type_size)) {
        btf_verifier_log_vsi(env, v->t, vsi, "Invalid type");
        return -EINVAL;
    }

Most types are sized, so for example a VAR referring to an INT is not a
problem. The bug is only triggered if a VAR points at a modifier. Since
we skipped btf_var_resolve that modifier was also never resolved, which
means that btf_resolved_type_id returns 0 aka VOID for the modifier.
This in turn causes btf_type_id_size to return NULL, triggering EINVAL.

To summarise, the following conditions are necessary:

- VAR pointing at PTR, STRUCT, UNION or ARRAY
- Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or
  TYPE_TAG

The fix is to reset resolve_mode to RESOLVE_TBD before attempting to
resolve a VAR from a DATASEC.

Fixes: 1dc92851849c ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES

[ Upstream commit 6c20822fada1b8adb77fa450d03a0d449686a4a9 ]

&xdp_buff and &xdp_frame are bound in a way that

xdp_buff->data_hard_start == xdp_frame

It's always the case and e.g. xdp_convert_buff_to_frame() relies on
this.
IOW, the following:

for (u32 i = 0; i < 0xdead; i++) {
xdpf = xdp_convert_buff_to_frame(&xdp);
xdp_convert_frame_to_buff(xdpf, &xdp);
}

shouldn't ever modify @xdpf's contents or the pointer itself.
However, "live packet" code wrongly treats &xdp_frame as part of its
context placed *before* the data_hard_start. With such flow,
data_hard_start is sizeof(*xdpf) off to the right and no longer points
to the XDP frame.

Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several
places and praying that there are no more miscalcs left somewhere in the
code, unionize ::frm with ::data in a flex array, so that both starts
pointing to the actual data_hard_start and the XDP frame actually starts
being a part of it, i.e. a part of the headroom, not the context.
A nice side effect is that the maximum frame size for this mode gets
increased by 40 bytes, as xdp_buff::frame_sz includes everything from
data_hard_start (-> includes xdpf already) to the end of XDP/skb shared
info.
Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it
hardcoded for 64 bit && 4k pages, it can be made more flexible later on.

Minor: align `&head->data` with how `head->frm` is assigned for
consistency.
Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for
clarity.

(was found while testing XDP traffic generator on ice, which calls
 xdp_convert_frame_to_buff() for each XDP frame)

Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230215185440.4126672-1-aleksander.lobakin@intel.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix extent map logging bit not cleared for split maps after dropping range

[ Upstream commit e4cc1483f35940c9288c332dd275f6fad485f8d2 ]

At btrfs_drop_extent_map_range() we are clearing the EXTENT_FLAG_LOGGING
bit on a 'flags' variable that was not initialized. This makes static
checkers complain about it, so initialize the 'flags' variable before
clearing the bit.

In practice this has no consequences, because EXTENT_FLAG_LOGGING should
not be set when btrfs_drop_extent_map_range() is called, as an fsync locks
the inode in exclusive mode, locks the inode's mmap semaphore in exclusive
mode too and it always flushes all delalloc.

Also add a comment about why we clear EXTENT_FLAG_LOGGING on a copy of the
flags of the split extent map.

Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/Y%2FyipSVozUDEZKow@kili/
Fixes: db21370bffbc ("btrfs: drop extent map range more efficiently")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: mm: Move initrd phys_to_virt handling after paging_init()

[ Upstream commit d4b97925e87eb133e400fe4a482d750c74ce392f ]

When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):

    initrd: 0ef0602c - 0f800000
    Zone ranges:
      DMA      [mem 0x0000000008000000-0x000000f7ffffffff]
      Normal   empty
    Movable zone start for each node
    Early memory node ranges
      node   0: [mem 0x0000000008000000-0x000000000f7fffff]
    Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
    Unable to handle kernel access at virtual address (ptrval)
    Oops: 00000000
    Modules linked in:
    PC: [<00201d3c>] memcmp+0x28/0x56

As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init().  Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().

While at it, reduce #ifdef clutter by using IS_ENABLED() instead.

Fixes: 376e3fdecb0dcae2 ("m68k: Enable memtest functionality")
Reported-by: Stephen Walsh <vk3heg@vk3heg.net>
Link: https://lists.debian.org/debian-68k/2022/09/msg00007.html
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4f45f05f377bf3f5baf88dbd5c3c8aeac59d94f0.camel@physik.fu-berlin.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/dff216da09ab7a60217c3fc2147e671ae07d636f.1677528627.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: tproxy: fix deadlock due to missing BH disable

[ Upstream commit 4a02426787bf024dafdb79b362285ee325de3f5e ]

The xtables packet traverser performs an unconditional local_bh_disable(),
but the nf_tables evaluation loop does not.

Functions that are called from either xtables or nftables must assume
that they can be called in process context.

inet_twsk_deschedule_put() assumes that no softirq interrupt can occur.
If tproxy is used from nf_tables its possible that we'll deadlock
trying to aquire a lock already held in process context.

Add a small helper that takes care of this and use it.

Link: https://lore.kernel.org/netfilter-devel/401bd6ed-314a-a196-1cdc-e13c720cc8f2@balasys.hu/
Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
Reported-and-tested-by: Major Dávid <major.david@balasys.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ctnetlink: revert to dumping mark regardless of event type

[ Upstream commit 9f7dd42f0db1dc6915a52d4a8a96ca18dd8cc34e ]

It seems that change was unintentional, we have userspace code that
needs the mark while listening for events like REPLY, DESTROY, etc.
Also include 0-marks in requested dumps, as they were before that fix.

Fixes: 1feeae071507 ("netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark")
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Avoid order-5 memory allocation for TPA data

[ Upstream commit accd7e23693aaaa9aa0d3e9eca0ae77d1be80ab3 ]

The driver needs to keep track of all the possible concurrent TPA (GRO/LRO)
completions on the aggregation ring.  On P5 chips, the maximum number
of concurrent TPA is 256 and the amount of memory we allocate is order-5
on systems using 4K pages.  Memory allocation failure has been reported:

NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1
CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1
Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022
Call Trace:
 dump_stack+0x57/0x6e
 warn_alloc.cold.120+0x7b/0xdd
 ? _cond_resched+0x15/0x30
 ? __alloc_pages_direct_compact+0x15f/0x170
 __alloc_pages_slowpath.constprop.108+0xc58/0xc70
 __alloc_pages_nodemask+0x2d0/0x300
 kmalloc_order+0x24/0xe0
 kmalloc_order_trace+0x19/0x80
 bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en]
 ? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en]
 __bnxt_open_nic+0x12e/0x780 [bnxt_en]
 bnxt_open+0x10b/0x240 [bnxt_en]
 __dev_open+0xe9/0x180
 __dev_change_flags+0x1af/0x220
 dev_change_flags+0x21/0x60
 do_setlink+0x35c/0x1100

Instead of allocating this big chunk of memory and dividing it up for the
concurrent TPA instances, allocate each small chunk separately for each
TPA instance.  This will reduce it to order-0 allocations.

Fixes: 79632e9ba386 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phylib: get rid of unnecessary locking

[ Upstream commit f4b47a2e9463950df3e7c8b70e017877c1d4eb11 ]

The locking in phy_probe() and phy_remove() does very little to prevent
any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA
warnings. Remove it.

======================================================
WARNING: possible circular locking dependency detected
6.2.0-dirty #1108 Tainted: G        W   E
------------------------------------------------------
ip/415 is trying to acquire lock:
ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy]

but task is already holding lock:
ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (rtnl_mutex){+.+.}-{3:3}:
       __lock_acquire+0x35c/0x6c0
       lock_acquire.part.0+0xcc/0x220
       lock_acquire+0x68/0x84
       __mutex_lock+0x8c/0x414
       mutex_lock_nested+0x34/0x40
       rtnl_lock+0x24/0x30
       sfp_bus_add_upstream+0x34/0x150
       phy_sfp_probe+0x4c/0x94 [libphy]
       mv3310_probe+0x148/0x184 [marvell10g]
       phy_probe+0x8c/0x200 [libphy]
       call_driver_probe+0xbc/0x15c
       really_probe+0xc0/0x320
       __driver_probe_device+0x84/0x120
       driver_probe_device+0x44/0x120
       __device_attach_driver+0xc4/0x160
       bus_for_each_drv+0x80/0xe0
       __device_attach+0xb0/0x1f0
       device_initial_probe+0x1c/0x2c
       bus_probe_device+0xa4/0xb0
       device_add+0x360/0x53c
       phy_device_register+0x60/0xa4 [libphy]
       fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio]
       fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio]
       of_mdiobus_register+0x140/0x340 [of_mdio]
       orion_mdio_probe+0x298/0x3c0 [mvmdio]
       platform_probe+0x70/0xe0
       call_driver_probe+0x34/0x15c
       really_probe+0xc0/0x320
       __driver_probe_device+0x84/0x120
       driver_probe_device+0x44/0x120
       __driver_attach+0x104/0x210
       bus_for_each_dev+0x78/0xdc
       driver_attach+0x2c/0x3c
       bus_add_driver+0x184/0x240
       driver_register+0x80/0x13c
       __platform_driver_register+0x30/0x3c
       xt_compat_calc_jump+0x28/0xa4 [x_tables]
       do_one_initcall+0x50/0x1b0
       do_init_module+0x50/0x1fc
       load_module+0x684/0x744
       __do_sys_finit_module+0xc4/0x140
       __arm64_sys_finit_module+0x28/0x34
       invoke_syscall+0x50/0x120
       el0_svc_common.constprop.0+0x6c/0x1b0
       do_el0_svc+0x34/0x44
       el0_svc+0x48/0xf0
       el0t_64_sync_handler+0xb8/0xc0
       el0t_64_sync+0x1a0/0x1a4

-> #0 (&dev->lock){+.+.}-{3:3}:
       check_prev_add+0xb4/0xc80
       validate_chain+0x414/0x47c
       __lock_acquire+0x35c/0x6c0
       lock_acquire.part.0+0xcc/0x220
       lock_acquire+0x68/0x84
       __mutex_lock+0x8c/0x414
       mutex_lock_nested+0x34/0x40
       phy_attach_direct+0x17c/0x3a0 [libphy]
       phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink]
       phylink_fwnode_phy_connect+0x48/0x60 [phylink]
       mvpp2_open+0xec/0x2e0 [mvpp2]
       __dev_open+0x104/0x214
       __dev_change_flags+0x1d4/0x254
       dev_change_flags+0x2c/0x7c
       do_setlink+0x254/0xa50
       __rtnl_newlink+0x430/0x514
       rtnl_newlink+0x58/0x8c
       rtnetlink_rcv_msg+0x17c/0x560
       netlink_rcv_skb+0x64/0x150
       rtnetlink_rcv+0x20/0x30
       netlink_unicast+0x1d4/0x2b4
       netlink_sendmsg+0x1a4/0x400
       ____sys_sendmsg+0x228/0x290
       ___sys_sendmsg+0x88/0xec
       __sys_sendmsg+0x70/0xd0
       __arm64_sys_sendmsg+0x2c/0x40
       invoke_syscall+0x50/0x120
       el0_svc_common.constprop.0+0x6c/0x1b0
       do_el0_svc+0x34/0x44
       el0_svc+0x48/0xf0
       el0t_64_sync_handler+0xb8/0xc0
       el0t_64_sync+0x1a0/0x1a4

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock(&dev->lock);
                               lock(rtnl_mutex);
  lock(&dev->lock);

 *** DEADLOCK ***

Fixes: 298e54fa810e ("net: phy: add core phylib sfp support")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: add to set device wake up flag when stmmac init phy

[ Upstream commit a9334b702a03b693f54ebd3b98f67bf722b74870 ]

When MAC is not support PMT, driver will check PHY's WoL capability
and set device wakeup capability in stmmac_init_phy(). We can enable
the WoL through ethtool, the driver would enable the device wake up
flag. Now the device_may_wakeup() return true.

But if there is a way which enable the PHY's WoL capability derectly,
like in BIOS. The driver would not know the enable thing and would not
set the device wake up flag. The phy_suspend may failed like this:

[   32.409063] PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x50 returns -16
[   32.409065] PM: Device stmmac-1:00 failed to suspend: error -16
[   32.409067] PM: Some devices failed to suspend, or early wake event detected

Add to set the device wakeup enable flag according to the get_wol
function result in PHY can fix the error in this scene.

v2: add a Fixes tag.

Fixes: 1d8e5b0f3f2c ("net: stmmac: Support WOL with phy")
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: clear DSPP reservations in rm release

[ Upstream commit 5ec498ba86550909f2611b07087d57a71a78c336 ]

Clear DSPP reservations from the global state during
rm release

Fixes: e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver")
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/522443/
Link: https://lore.kernel.org/r/1676286704-818-2-git-send-email-quic_kalyant@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks

[ Upstream commit 0abb6a24aabc1252eae75fe23b0ccd3217c6ee07 ]

DMA2 and DMA3 planes on msm8998 should use corresponding DMA2 and DMA3
clocks rather than CURSOR0/1 clocks (which are used for the CURSOR
planes). Correct corresponding SSPP declarations.

Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Cc: Jami Kettunen <jami.kettunen@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522230/
Link: https://lore.kernel.org/r/20230211231259.1308718-13-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: drop DPU_DIM_LAYER from MIXER_MSM8998_MASK

[ Upstream commit a5045b00a68171de11603812f4304179ef608e60 ]

The msm8998 doesn't seem to support DIM_LAYER, so drop it from
the supported features mask.

Fixes: 2d8a4edb672d ("drm/msm/dpu: use feature bit for LM combined alpha check")
Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522231/
Link: https://lore.kernel.org/r/20230211231259.1308718-12-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: fix len of sc7180 ctl blocks

[ Upstream commit ce6bd00abc220e9edf10986234fadba6462b4abf ]

Change sc7180's ctl block len to 0x1dc.

Fixes: 7bdc0c4b8126 ("msm:disp:dpu1: add support for display for SC7180 target")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522210/
Link: https://lore.kernel.org/r/20230211231259.1308718-5-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()

[ Upstream commit d900f3d20cc3169ce42ec72acc850e662a4d4db2 ]

When the buffer length of the recvmsg system call is 0, we got the
flollowing soft lockup problem:

watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149]
CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:remove_wait_queue+0xb/0xc0
Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20
RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768
RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040
RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7
R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800
R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0
FS:  00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 tcp_msg_wait_data+0x279/0x2f0
 tcp_bpf_recvmsg_parser+0x3c6/0x490
 inet_recvmsg+0x280/0x290
 sock_recvmsg+0xfc/0x120
 ____sys_recvmsg+0x160/0x3d0
 ___sys_recvmsg+0xf0/0x180
 __sys_recvmsg+0xea/0x1a0
 do_syscall_64+0x3f/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

The logic in tcp_bpf_recvmsg_parser is as follows:

msg_bytes_ready:
copied = sk_msg_recvmsg(sk, psock, msg, len, flags);
if (!copied) {
wait data;
goto msg_bytes_ready;
}

In this case, "copied" always is 0, the infinite loop occurs.

According to the Linux system call man page, 0 should be returned in this
case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly
return. Also modify several other functions with the same problem.

Fixes: 1f5be6b3b063 ("udp: Implement udp_bpf_recvmsg() for sockmap")
Fixes: 9825d866ce0d ("af_unix: Implement unix_dgram_bpf_recvmsg()")
Fixes: c5d2177a72a1 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self")
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230303080946.1146638-1-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: copy last block omitted in ice_get_module_eeprom()

[ Upstream commit 84cba1840e68430325ac133a11be06bfb2f7acd8 ]

ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice:
Reimplement module reads used by ethtool") In this refactor,
ice_get_module_eeprom() reads the eeprom in blocks of size 8.
But the condition that should protect the buffer overflow
ignores the last block. The last block always contains zeros.

Bug uncovered by ethtool upstream commit 9538f384b535
("netlink: eeprom: Defer page requests to individual parsers")
After this commit, ethtool reads a block with length = 1;
to read the SFF-8024 identifier value.

unpatched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset          Values
------          ------
0x0090:         00 00 00 00 00 00 00 00
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset          Values
------          ------
0x0090:         00 00 01 a0 4d 65 6c 6c 00 00 00 00
$

$ ethtool -m enp65s0f0np0
Offset          Values
------          ------
0x0000:         11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0010:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0020:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0030:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0040:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0050:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0060:         00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00
0x0070:         00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00

patched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset          Values
------          ------
0x0090:         00 00 01 a0 4d 65 6c 6c
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset          Values
------          ------
0x0090:         00 00 01 a0 4d 65 6c 6c 61 6e 6f 78
$ ethtool -m enp65s0f0np0
    Identifier                                : 0x11 (QSFP28)
    Extended identifier                       : 0x00
    Extended identifier description           : 1.5W max. Power consumption
    Extended identifier description           : No CDR in TX, No CDR in RX
    Extended identifier description           : High Power Class (> 3.5 W) not enabled
    Connector                                 : 0x23 (No separable connector)
    Transceiver codes                         : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Transceiver type                          : 40G Ethernet: 40G Base-CR4
    Transceiver type                          : 25G Ethernet: 25G Base-CR CA-N
    Encoding                                  : 0x05 (64B/66B)
    BR, Nominal                               : 25500Mbps
    Rate identifier                           : 0x00
    Length (SMF,km)                           : 0km
    Length (OM3 50um)                         : 0m
    Length (OM2 50um)                         : 0m
    Length (OM1 62.5um)                       : 0m
    Length (Copper or Active cable)           : 1m
    Transmitter technology                    : 0xa0 (Copper cable unequalized)
    Attenuation at 2.5GHz                     : 4db
    Attenuation at 5.0GHz                     : 5db
    Attenuation at 7.0GHz                     : 7db
    Attenuation at 12.9GHz                    : 10db
    ........
    ....

Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: caif: Fix use-after-free in cfusbl_device_notify()

[ Upstream commit 9781e98a97110f5e76999058368b4be76a788484 ]

syzbot reported use-after-free in cfusbl_device_notify() [1].  This
causes a stack trace like below:

BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214

CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff72066 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
 print_report mm/kasan/report.c:429 [inline]
 kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
 cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945
 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
 call_netdevice_notifiers net/core/dev.c:1997 [inline]
 netdev_wait_allrefs_any net/core/dev.c:10227 [inline]
 netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341
 default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334
 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
 </TASK>

When unregistering a net device, unregister_netdevice_many_notify()
sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers
with NETDEV_UNREGISTER, and adds the device to the todo list.

Later on, devices in the todo list are processed by netdev_run_todo().
netdev_run_todo() waits devices' reference count become 1 while
rebdoadcasting NETDEV_UNREGISTER notification.

When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple
times, the parent device might be freed.  This could cause UAF.
Processing NETDEV_UNREGISTER multiple times also causes inbalance of
reference count for the module.

This patch fixes the issue by accepting only first NETDEV_UNREGISTER
notification.

Fixes: 7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface")
CC: sjur.brandeland@stericsson.com <sjur.brandeland@stericsson.com>
Reported-by: syzbot+b563d33852b893653a9e@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=c3bfd8e2450adab3bffe4d80821fbbced600407f
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230301163913.391304-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver

[ Upstream commit e57cf3639c323eeed05d3725fd82f91b349adca8 ]

Move the LAN7800 internal phy (phy ID  0x0007c132) specific register
accesses to the phy driver (microchip.c).

Fix the error reported by Enguerrand de Ribaucourt in December 2022,
"Some operations during the cable switch workaround modify the register
LAN88XX_INT_MASK of the PHY. However, this register is specific to the
LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801,
that register (0x19), corresponds to the LED and MAC address
configuration, resulting in unapropriate behavior."

I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800
with the internal PHY.

Fixes: 14437e3fa284 ("lan78xx: workaround of forced 100 Full/Half duplex mode error")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Fix counting when initial delay configured

[ Upstream commit 25f69c69bc3ca8c781a94473f28d443d745768e3 ]

When creating counters with initial delay configured, the enable_on_exec
field is not set. So we need to enable the counters later. The problem
is, when a workload is specified the target__none() is true. So we also
need to check stat_config.initial_delay.

In this change, we add a new field 'initial_delay' for struct target
which could be shared by other subcommands. And define
target__enable_on_exec() which returns whether enable_on_exec should be
set on normal cases.

Before this fix the event is not counted:

  $ ./perf stat -e instructions -D 100 sleep 2
  Events disabled
  Events enabled

   Performance counter stats for 'sleep 2':

       <not counted>      instructions

         1.901661124 seconds time elapsed

         0.001602000 seconds user
         0.000000000 seconds sys

After fix it works:

  $ ./perf stat -e instructions -D 100 sleep 2
  Events disabled
  Events enabled

   Performance counter stats for 'sleep 2':

             404,214      instructions

         1.901743475 seconds time elapsed

         0.001617000 seconds user
         0.000000000 seconds sys

Fixes: c587e77e100fa40e ("perf stat: Do not delay the workload with --delay")
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hui Wang <hw.huiwang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230302031146.2801588-2-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: use indirect calls helpers for sk_exit_memory_pressure()

[ Upstream commit 5c1ebbfabcd61142a4551bfc0e51840f9bdae7af ]

Florian reported a regression and sent a patch with the following
changelog:

<quote>
 There is a noticeable tcp performance regression (loopback or cross-netns),
 seen with iperf3 -Z (sendfile mode) when generic retpolines are needed.

 With SK_RECLAIM_THRESHOLD checks gone number of calls to enter/leave
 memory pressure happen much more often. For TCP indirect calls are
 used.

 We can't remove the if-set-return short-circuit check in
 tcp_enter_memory_pressure because there are callers other than
 sk_enter_memory_pressure.  Doing a check in the sk wrapper too
 reduces the indirect calls enough to recover some performance.

 Before,
 0.00-60.00  sec   322 GBytes  46.1 Gbits/sec                  receiver

 After:
 0.00-60.04  sec   359 GBytes  51.4 Gbits/sec                  receiver

 "iperf3 -c $peer -t 60 -Z -f g", connected via veth in another netns.
</quote>

It seems we forgot to upstream this indirect call mitigation we
had for years, lets do this instead.

[edumazet] - It seems we forgot to upstream this indirect call
             mitigation we had for years, let's do this instead.
           - Changed to INDIRECT_CALL_INET_1() to avoid bots reports.

Fixes: 4890b686f408 ("net: keep sk->sk_forward_alloc as small as possible")
Reported-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/netdev/20230227152741.4a53634b@kernel.org/T/
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230301133247.2346111-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tls: fix possible race condition between do_tls_getsockopt_conf() and do_tls_setsockopt_conf()

[ Upstream commit 49c47cc21b5b7a3d8deb18fc57b0aa2ab1286962 ]

ctx->crypto_send.info is not protected by lock_sock in
do_tls_getsockopt_conf(). A race condition between do_tls_getsockopt_conf()
and error paths of do_tls_setsockopt_conf() may lead to a use-after-free
or null-deref.

More discussion:  https://lore.kernel.org/all/Y/ht6gQL+u6fj3dG@hog/

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20230228023344.9623-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_quota: copy content when cloning expression

[ Upstream commit aabef97a35160461e9c576848ded737558d89055 ]

If the ruleset contains consumed quota, restore them accordingly.
Otherwise, listing after restoration shows never used items.

Restore the user-defined quota and flags too.

Fixes: ed0a0c60f0e5 ("netfilter: nft_quota: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_last: copy content when cloning expression

[ Upstream commit 860e874290fb3be08e966c9c8ffc510c5b0f2bd8 ]

If the ruleset contains last timestamps, restore them accordingly.
Otherwise, listing after restoration shows never used items.

Fixes: 33a24de37e81 ("netfilter: nft_last: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: nft_nat: ensuring the listening side is up before starting the client

[ Upstream commit 2067e7a00aa604b94de31d64f29b8893b1696f26 ]

The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.

Before the fix:
  # ./nft_nat.sh
  PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
  PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
  PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
  PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
  2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
  ERROR: inet port rewrite

After the fix:
  # ./nft_nat.sh
  PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
  PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
  PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
  PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
  PASS: inet port rewrite without l3 address

Fixes: 282e5f8fe907 ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lan966x: Fix port police support using tc-matchall

[ Upstream commit 81563d8548b0478075c720666be348d4199b8591 ]

When the police was removed from the port, then it was trying to
remove the police from the police id and not from the actual
police index.
The police id represents the id of the police and police index
represents the position in HW where the police is situated.
The port police id can be any number while the port police index
is a number based on the port chip port.
Fix this by deleting the police from HW that is situated at the
police index and not police id.

Fixes: 5390334b59a3 ("net: lan966x: Add port police support using tc-matchall")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()

[ Upstream commit 693aa2c0d9b6d5b1f2745d31b6e70d09dbbaf06e ]

ila_xlat_nl_cmd_get_mapping() generates an empty skb,
triggerring a recent sanity check [1].

Instead, return an error code, so that user space
can get it.

[1]
skb_assert_len
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 skb_assert_len include/linux/skbuff.h:2527 [inline]
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
Modules linked in:
CPU: 0 PID: 5923 Comm: syz-executor269 Not tainted 6.2.0-syzkaller-18300-g2ebd1fbb946d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_assert_len include/linux/skbuff.h:2527 [inline]
pc : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
lr : skb_assert_len include/linux/skbuff.h:2527 [inline]
lr : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
sp : ffff80001e0d6c40
x29: ffff80001e0d6e60 x28: dfff800000000000 x27: ffff0000c86328c0
x26: dfff800000000000 x25: ffff0000c8632990 x24: ffff0000c8632a00
x23: 0000000000000000 x22: 1fffe000190c6542 x21: ffff0000c8632a10
x20: ffff0000c8632a00 x19: ffff80001856e000 x18: ffff80001e0d5fc0
x17: 0000000000000000 x16: ffff80001235d16c x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001
x11: ff80800008353a30 x10: 0000000000000000 x9 : 21567eaf25bfb600
x8 : 21567eaf25bfb600 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff80001e0d6558 x4 : ffff800015c74760 x3 : ffff800008596744
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000000e
Call trace:
skb_assert_len include/linux/skbuff.h:2527 [inline]
__dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
dev_queue_xmit include/linux/netdevice.h:3033 [inline]
__netlink_deliver_tap_skb net/netlink/af_netlink.c:307 [inline]
__netlink_deliver_tap+0x45c/0x6f8 net/netlink/af_netlink.c:325
netlink_deliver_tap+0xf4/0x174 net/netlink/af_netlink.c:338
__netlink_sendskb net/netlink/af_netlink.c:1283 [inline]
netlink_sendskb+0x6c/0x154 net/netlink/af_netlink.c:1292
netlink_unicast+0x334/0x8d4 net/netlink/af_netlink.c:1380
nlmsg_unicast include/net/netlink.h:1099 [inline]
genlmsg_unicast include/net/genetlink.h:433 [inline]
genlmsg_reply include/net/genetlink.h:443 [inline]
ila_xlat_nl_cmd_get_mapping+0x620/0x7d0 net/ipv6/ila/ila_xlat.c:493
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x938/0xc1c net/netlink/genetlink.c:1065
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2574
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x800/0xae0 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x558/0x844 net/socket.c:2479
___sys_sendmsg net/socket.c:2533 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2562
__do_sys_sendmsg net/socket.c:2571 [inline]
__se_sys_sendmsg net/socket.c:2569 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2569
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x258 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x58/0x168 arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
irq event stamp: 136484
hardirqs last enabled at (136483): [<ffff800008350244>] __up_console_sem+0x60/0xb4 kernel/printk/printk.c:345
hardirqs last disabled at (136484): [<ffff800012358d60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:405
softirqs last enabled at (136418): [<ffff800008020ea8>] softirq_handle_end kernel/softirq.c:414 [inline]
softirqs last enabled at (136418): [<ffff800008020ea8>] __do_softirq+0xd4c/0xfa4 kernel/softirq.c:600
softirqs last disabled at (136371): [<ffff80000802b4a4>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80
---[ end trace 0000000000000000 ]---
skb len=0 headroom=0 headlen=0 tailroom=192
mac=(0,0) net=(0,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0010 pkttype=6 iif=0
dev name=nlmon0 feat=0x0000000000005861

Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: disable features unsupported by QCM2290

[ Upstream commit a2a448b4d9bcb5bff0e0f687b7932a7be9ca898a ]

QCM2290 doesn't seem to support reg-dma, UBWC and CSC. Drop
corresponding features being incorrectly enabled for qcm2290.

Cc: Loic Poulain <loic.poulain@linaro.org>
Fixes: 5334087ee743 ("drm/msm: add support for QCM2290 MDSS")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522209/
Link: https://lore.kernel.org/r/20230211231259.1308718-3-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tls: rx: fix return value for async crypto

[ Upstream commit 4d42cd6bc2ac1b9be50ade13771daec90c9d18b1 ]

Gaurav reports that TLS Rx is broken with async crypto
accelerators. The commit under fixes missed updating
the retval byte counting logic when updating how records
are stored. Even tho both before and after the change
'decrypted' was updated inside the main loop, it was
completely overwritten when processing the async
completions. Now that the rx_list only holds
non-zero-copy records we need to add, not overwrite.

Reported-and-bisected-by: Gaurav Jain <gaurav.jain@nxp.com>
Fixes: cbbdee9918a2 ("tls: rx: async: don't put async zc on the list")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217064
Tested-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227181201.1793772-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: dts: t1040rdb: fix compatible string for Rev A boards

[ Upstream commit ae44f1c9d1fc54aeceb335fedb1e73b2c3ee4561 ]

It looks like U-Boot fails to start the kernel properly when the
compatible string of the board isn't fsl,T1040RDB, so stop overriding it
from the rev-a.dts.

Fixes: 5ebb74749202 ("powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties

[ Upstream commit 11f180a5d62a51b484e9648f9b310e1bd50b1a57 ]

devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause
out-of-bounds write in device_property_read_u8_array later.

Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Kang Chen <void0red@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227093037.907654-1-void0red@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bgmac: fix *initial* chip reset to support BCM5358

[ Upstream commit f99e6d7c4ed3be2531bd576425a5bd07fb133bd7 ]

While bringing hardware up we should perform a full reset including the
switch bit (BGMAC_BCMA_IOCTL_SW_RESET aka SICF_SWRST). It's what
specification says and what reference driver does.

This seems to be critical for the BCM5358. Without this hardware doesn't
get initialized properly and doesn't seem to transmit or receive any
packets.

Originally bgmac was calling bgmac_chip_reset() before setting
"has_robosw" property which resulted in expected behaviour. That has
changed as a side effect of adding platform device support which
regressed BCM5358 support.

Fixes: f6a95a24957a ("net: ethernet: bgmac: Add platform device support")
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230227091156.19509-1-zajec5@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a5xx: fix context faults during ring switch

[ Upstream commit 32e7083429d46f29080626fe387ff90c086b1fbe ]

The rptr_addr is set in the preempt_init_ring(), which is called from
a5xx_gpu_init(). It uses shadowptr() to set the address, however the
shadow_iova is not yet initialized at that time. Move the rptr_addr
setting to the a5xx_preempt_hw_init() which is called after setting the
shadow_iova, getting the correct value for the address.

Fixes: 8907afb476ac ("drm/msm: Allow a5xx to mark the RPTR shadow as privileged")
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522640/
Link: https://lore.kernel.org/r/20230214020956.164473-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a5xx: fix the emptyness check in the preempt code

[ Upstream commit b4fb748f0b734ce1d2e7834998cc599fcbd25d67 ]

Quoting Yassine: ring->memptrs->rptr is never updated and stays 0, so
the comparison always evaluates to false and get_next_ring always
returns ring 0 thinking it isn't empty.

Fix this by calling get_rptr() instead of reading rptr directly.

Reported-by: Yassine Oudjana <y.oudjana@protonmail.com>
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522642/
Link: https://lore.kernel.org/r/20230214020956.164473-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a5xx: fix highest bank bit for a530

[ Upstream commit 141f66ebbfa17cc7e2075f06c50107da978c965b ]

A530 has highest bank bit equal to 15 (like A540). Fix values written to
REG_A5XX_RB_MODE_CNTL and REG_A5XX_TPL1_MODE_CNTL registers.

Fixes: 1d832ab30ce6 ("drm/msm/a5xx: Add support for Adreno 508, 509, 512 GPUs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522639/
Link: https://lore.kernel.org/r/20230214020956.164473-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register

[ Upstream commit a7a4c19c36de1e4b99b06e4060ccc8ab837725bc ]

Rather than writing CP_PREEMPT_ENABLE_GLOBAL twice, follow the vendor
kernel and set CP_PREEMPT_ENABLE_LOCAL register instead. a5xx_submit()
will override it during submission, but let's get the sequence correct.

Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522638/
Link: https://lore.kernel.org/r/20230214020956.164473-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix potential invalid ptr free

[ Upstream commit 8a86f213f4426f19511a16d886871805b35c3acf ]

The error path cleanup expects that chain and syncobj are either NULL or
valid pointers.  But post_deps was not allocated with __GFP_ZERO.

Fixes: ab723b7a992a ("drm/msm: Add syncobj support.")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Patchwork: https://patchwork.freedesktop.org/patch/523051/
Link: https://lore.kernel.org/r/20230215235048.1166484-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/kms/nv50: fix nv50_wndw_new_ prototype

[ Upstream commit 3638a820c5c3b52f327cebb174fd4274bee08aa7 ]

gcc-13 warns about mismatching types for enums. That revealed switched
arguments of nv50_wndw_new_():
  drivers/gpu/drm/nouveau/dispnv50/wndw.c:696:1: error: conflicting types for 'nv50_wndw_new_' due to enum/integer mismatch; have 'int(const struct nv50_wndw_func *, struct drm_device *, enum drm_plane_type,  const char *, int,  const u32 *, u32,  enum nv50_disp_interlock_type,  u32,  struct nv50_wndw **)'
  drivers/gpu/drm/nouveau/dispnv50/wndw.h:36:5: note: previous declaration of 'nv50_wndw_new_' with type 'int(const struct nv50_wndw_func *, struct drm_device *, enum drm_plane_type,  const char *, int,  const u32 *, enum nv50_disp_interlock_type,  u32,  u32,  struct nv50_wndw **)'

It can be barely visible, but the declaration says about the parameters
in the middle:
  enum nv50_disp_interlock_type,
  u32 interlock_data,
  u32 heads,

While the definition states differently:
  u32 heads,
  enum nv50_disp_interlock_type interlock_type,
  u32 interlock_data,

Unify/fix the declaration to match the definition.

Fixes: 53e0a3e70de6 ("drm/nouveau/kms/nv50-: simplify tracking of channel interlocks")
Cc: Martin Liska <mliska@suse.cz>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031114229.10289-1-jirislaby@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: improve checking of DFS links over STATUS_OBJECT_NAME_INVALID

[ Upstream commit b9ee2e307c6b06384b6f9e393a9b8e048e8fc277 ]

Do not map STATUS_OBJECT_NAME_INVALID to -EREMOTE under non-DFS
shares, or 'nodfs' mounts or CONFIG_CIFS_DFS_UPCALL=n builds.
Otherwise, in the slow path, get a referral to figure out whether it
is an actual DFS link.

This could be simply reproduced under a non-DFS share by running the
following

  $ mount.cifs //srv/share /mnt -o ...
  $ cat /mnt/$(printf '\U110000')
  cat: '/mnt/'$'\364\220\200\200': Object is remote

Fixes: c877ce47e137 ("cifs: reduce roundtrips on create/qinfo requests")
CC: stable@vger.kernel.org # 6.2
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: Fix possible corruption when moving a directory

[ Upstream commit 0813299c586b175d7edb25f56412c54b812d0379 ]

When we are renaming a directory to a different directory, we need to
update '..' entry in the moved directory. However nothing prevents moved
directory from being modified and even converted from the inline format
to the normal format. When such race happens the rename code gets
confused and we crash. Fix the problem by locking the moved directory.

CC: stable@vger.kernel.org
Fixes: 32f7f22c0b52 ("ext4: let ext4_rename handle inline dir")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230126112221.11866-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Remove the /proc/scsi/${proc_name} directory earlier

[ Upstream commit fc663711b94468f4e1427ebe289c9f05669699c9 ]

Remove the /proc/scsi/${proc_name} directory earlier to fix a race
condition between unloading and reloading kernel modules. This fixes a bug
introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in
the SCSI core").

Fix the following kernel warning:

proc_dir_entry 'scsi/scsi_debug' already registered
WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0
Call Trace:
 proc_mkdir+0xb5/0xe0
 scsi_proc_hostdir_add+0xb5/0x170
 scsi_host_alloc+0x683/0x6c0
 sdebug_driver_probe+0x6b/0x2d0 [scsi_debug]
 really_probe+0x159/0x540
 __driver_probe_device+0xdc/0x230
 driver_probe_device+0x4f/0x120
 __device_attach_driver+0xef/0x180
 bus_for_each_drv+0xe5/0x130
 __device_attach+0x127/0x290
 device_initial_probe+0x17/0x20
 bus_probe_device+0x110/0x130
 device_add+0x673/0xc80
 device_register+0x1e/0x30
 sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug]
 scsi_debug_init+0x64f/0x1000 [scsi_debug]
 do_one_initcall+0xd7/0x470
 do_init_module+0xe7/0x330
 load_module+0x122a/0x12c0
 __do_sys_finit_module+0x124/0x1a0
 __x64_sys_finit_module+0x46/0x50
 do_syscall_64+0x38/0x80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Link: https://lore.kernel.org/r/20230210205200.36973-3-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Add header include guards to insn.h

[ Upstream commit 8ac6e619d9d51b3eb5bae817db8aa94e780a0db4 ]

Add header include guards to insn.h to prevent repeating declaration of
any identifiers in insn.h.

Fixes: edde5584c7ab ("riscv: Add SW single-step support for KDB")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Fixes: c9c1af3f186a ("RISC-V: rename parse_asm.h to insn.h")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230129094242.282620-1-liaochang1@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: fix scan partition for exclusively open device again

[ Upstream commit e5cfefa97bccf956ea0bb6464c1f6c84fd7a8d9f ]

As explained in commit 36369f46e917 ("block: Do not reread partition table
on exclusively open device"), reread partition on the device that is
exclusively opened by someone else is problematic.

This patch will make sure partition scan will only be proceed if current
thread open the device exclusively, or the device is not opened
exclusively, and in the later case, other scanners and exclusive openers
will be blocked temporarily until partition scan is done.

Fixes: 10c70d95c0f2 ("block: remove the bd_openers checks in blk_drop_partitions")
Cc: <stable@vger.kernel.org>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230217022200.3092987-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: Revert "block: Do not reread partition table on exclusively open device"

[ Upstream commit 0f77b29ad14e34a89961f32edc87b92db623bb37 ]

This reverts commit 36369f46e91785688a5f39d7a5590e3f07981316.

This patch can't fix the problem in a corner case that device can be
opened exclusively after the checking and before blkdev_get_by_dev().
We'll use a new solution to fix the problem in the next patch, and
the new solution doesn't need to change apis.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230217022200.3092987-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: e5cfefa97bcc ("block: fix scan partition for exclusively open device again")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Populate encoder->devdata for DSI on icl+

[ Upstream commit 14e591a1930c2790fe862af5b01ee3ca587f752f ]

We now have some eDP+DSI dual panel systems floating around
where the DSI panel is the secondary LFP and thus needs to
consult "panel type 2" in VBT in order to locate all the
other panel type dependant stuff correctly.

To that end we need to pass in the devdata to
intel_bios_init_panel_late(), otherwise it'll just assume
we want the primary panel type. So let's try to just populate
the vbt.ports[] stuff and encoder->devdata for icl+ DSI
panels as well.

We can't do this on older platforms as there we risk a DSI
port aliasing with a HDMI/DP port, which is a totally legal
thing as the DSI ports live in their own little parallel
universe.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit ba00eb6a4bfbe5194ddda50730aba063951f8ce0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Do panel VBT init early if the VBT declares an explicit panel type

[ Upstream commit 3f9ffce5765d68775163b8b134c4d7f156b48eec ]

Lots of ADL machines out there with bogus VBTs that declare
two eDP child devices. In order for those to work we need to
figure out which power sequencer to use before we try the EDID
read. So let's do the panel VBT init early if we can, falling
back to the post-EDID init otherwise.

The post-EDID init panel_type=0xff approach of assuming the
power sequencer should already be enabled doesn't really work
with multiple eDP panels, and currently we just end up using
the same power sequencer for both eDP ports, which at least
confuses the wakeref tracking, and potentially also causes us
to toggle the VDD for the panel when we should not.

Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125173156.31689-3-ville.syrjala@linux.intel.com
Stable-dep-of: 14e591a1930c ("drm/i915: Populate encoder->devdata for DSI on icl+")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Introduce intel_panel_init_alloc()

[ Upstream commit f70f8153e3642337b444fbc0c64d546a46bbcd62 ]

Introduce a place where we can initialize connector->panel
after it's been allocated. We already have a intel_panel_init()
so had to get creative with the name and came up with
intel_panel_init_alloc().

Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125173156.31689-2-ville.syrjala@linux.intel.com
Stable-dep-of: 14e591a1930c ("drm/i915: Populate encoder->devdata for DSI on icl+")
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: intel: Check number of chip selects after reading the descriptor

[ Upstream commit 574fbb95cd9d88bdc9c9c4c64223a38a61d7de9a ]

The flash decriptor contains the number of flash components that we use
to figure out how many flash chips there are connected. Therefore we
need to read it first before deciding how many chip selects the
controller has.

Reported-by: Marcin Witkowski <marcin.witkowski@intel.com>
Fixes: 3f03c618bebb ("spi: intel: Add support for second flash chip")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230215110040.42186-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi:ssif: Add a timer between request retries

[ Upstream commit 00bb7e763ec9f384cb382455cb6ba5588b5375cf ]

The IPMI spec has a time (T6) specified between request retries.  Add
the handling for that.

Reported by: Tony Camuso <tcamuso@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi:ssif: Increase the message retry time

[ Upstream commit 39721d62bbc16ebc9bb2bdc2c163658f33da3b0b ]

The spec states that the minimum message retry time is 60ms, but it was
set to 20ms.  Correct it.

Reported by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Stable-dep-of: 00bb7e763ec9 ("ipmi:ssif: Add a timer between request retries")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi:ssif: Remove rtc_us_timer

[ Upstream commit 9e8b89926fb87e5625bdde6fd5de2c31fb1d83bf ]

It was cruft left over from older handling of run to completion.

Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: exc3000 - properly stop timer on shutdown

[ Upstream commit 79c81d137d36f9635bbcbc3916c0cccb418a61dd ]

We need to stop the timer on driver unbind or probe failures, otherwise
we get UAF/Oops.

Fixes: 7e577a17f2ee ("Input: add I2C attached EETI EXC3000 multi touch driver")
Reported-by: "Stahl, Michael" <mstahl@moba.de>
Link: https://lore.kernel.org/r/Y9dK57BFqtlf8NmN@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: mhi: ep: Change state_lock to mutex

[ Upstream commit 1ddc7618294084fff8d673217a9479550990ee84 ]

state_lock, the spinlock type is meant to protect race against concurrent
MHI state transitions. In mhi_ep_set_m0_state(), while the state_lock is
being held, the channels are resumed in mhi_ep_resume_channels() if the
previous state was M3. This causes sleeping in atomic bug, since
mhi_ep_resume_channels() use mutex internally.

Since the state_lock is supposed to be held throughout the state change,
it is not ideal to drop the lock before calling mhi_ep_resume_channels().
So to fix this issue, let's change the type of state_lock to mutex. This
would also allow holding the lock throughout all state transitions thereby
avoiding any potential race.

Cc: <stable@vger.kernel.org> # 5.19
Fixes: e4b7b5f0f30a ("bus: mhi: ep: Add support for suspending and resuming channels")
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: mhi: ep: Power up/down MHI stack during MHI RESET

[ Upstream commit 47a1dcaea07367c84238e71c08244ae3ed48c1cc ]

During graceful shutdown scenario, host will issue MHI RESET to the
endpoint device before initiating shutdown. In that case, it makes sense
to completely power down the MHI stack as sooner or later the access to
MMIO registers will be prohibited. Also, the stack needs to be powered
up in the case of SYS_ERR to recover the device.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 1ddc76182940 ("bus: mhi: ep: Change state_lock to mutex")
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Fix off-by-one error when discarding preallocation

[ Upstream commit f54aa97fb7e5329a373f9df4e5e213ced4fc8759 ]

The condition determining whether the preallocation can be used had
an off-by-one error so we didn't discard preallocation when new
allocation was just following it. This can then confuse code in
inode_getblk().

CC: stable@vger.kernel.org
Fixes: 16d055656814 ("udf: Discard preallocation before extending file with a hole")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: fix race setting stop tx flag

[ Upstream commit 164272113b685927126c938b4a9cbd2075eb15ee ]

This patch sets the stop tx flag before we commit the dlm message.
This flag will report about unexpected transmissions after we
send the DLM_FIN message out, which should be the last message sent.
When we commit the dlm fin message, it could be that we already
got an ack back and the CLOSED state change already happened.
We should not set this flag when we are in CLOSED state. To avoid this
race we simply set the tx flag before the state change can be in
progress by moving it before dlm_midcomms_commit_mhandle().

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: be sure to call dlm_send_queue_flush()

[ Upstream commit 7354fa4ef697191effedc2ae9a8293427708bbf5 ]

If we release a midcomms node structure, there should be nothing left
inside the dlm midcomms send queue. However, sometimes this is not true
because I believe some DLM_FIN message was not acked... if we run
into a shutdown timeout, then we should be sure there is no pending send
dlm message inside this queue when releasing midcomms node structure.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: use WARN_ON_ONCE() instead of WARN_ON()

[ Upstream commit 775af207464bd28a2086f8399c0b2a3f1f40c7ae ]

To not get the console spammed about WARN_ON() of invalid states in the
dlm midcomms hot path handling we switch to WARN_ON_ONCE() to get it
only once that there might be an issue with the midcomms state handling.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 7354fa4ef697 ("fs: dlm: be sure to call dlm_send_queue_flush()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: fix use after free in midcomms commit

[ Upstream commit 724b6bab0d75f1dc01fdfbf7fe8d4217a5cb90ba ]

While working on processing dlm message in softirq context I experienced
the following KASAN use-after-free warning:

[  151.760477] ==================================================================
[  151.761803] BUG: KASAN: use-after-free in dlm_midcomms_commit_mhandle+0x19d/0x4b0
[  151.763414] Read of size 4 at addr ffff88811a980c60 by task lock_torture/1347

[  151.765284] CPU: 7 PID: 1347 Comm: lock_torture Not tainted 6.1.0-rc4+ #2828
[  151.766778] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+16134+e5908aa2 04/01/2014
[  151.768726] Call Trace:
[  151.769277]  <TASK>
[  151.769748]  dump_stack_lvl+0x5b/0x86
[  151.770556]  print_report+0x180/0x4c8
[  151.771378]  ? kasan_complete_mode_report_info+0x7c/0x1e0
[  151.772241]  ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[  151.773069]  kasan_report+0x93/0x1a0
[  151.773668]  ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[  151.774514]  __asan_load4+0x7e/0xa0
[  151.775089]  dlm_midcomms_commit_mhandle+0x19d/0x4b0
[  151.775890]  ? create_message.isra.29.constprop.64+0x57/0xc0
[  151.776770]  send_common+0x19f/0x1b0
[  151.777342]  ? remove_from_waiters+0x60/0x60
[  151.778017]  ? lock_downgrade+0x410/0x410
[  151.778648]  ? __this_cpu_preempt_check+0x13/0x20
[  151.779421]  ? rcu_lockdep_current_cpu_online+0x88/0xc0
[  151.780292]  _convert_lock+0x46/0x150
[  151.780893]  convert_lock+0x7b/0xc0
[  151.781459]  dlm_lock+0x3ac/0x580
[  151.781993]  ? 0xffffffffc0540000
[  151.782522]  ? torture_stop+0x120/0x120 [dlm_locktorture]
[  151.783379]  ? dlm_scan_rsbs+0xa70/0xa70
[  151.784003]  ? preempt_count_sub+0xd6/0x130
[  151.784661]  ? is_module_address+0x47/0x70
[  151.785309]  ? torture_stop+0x120/0x120 [dlm_locktorture]
[  151.786166]  ? 0xffffffffc0540000
[  151.786693]  ? lockdep_init_map_type+0xc3/0x360
[  151.787414]  ? 0xffffffffc0540000
[  151.787947]  torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[  151.789004]  ? torture_stop+0x120/0x120 [dlm_locktorture]
[  151.789858]  ? 0xffffffffc0540000
[  151.790392]  ? lock_torture_cleanup+0x20/0x20 [dlm_locktorture]
[  151.791347]  ? delay_tsc+0x94/0xc0
[  151.791898]  torture_ex_iter+0xc3/0xea [dlm_locktorture]
[  151.792735]  ? torture_start+0x30/0x30 [dlm_locktorture]
[  151.793606]  lock_torture+0x177/0x270 [dlm_locktorture]
[  151.794448]  ? torture_dlm_lock_sync.isra.3+0x150/0x150 [dlm_locktorture]
[  151.795539]  ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[  151.796476]  ? do_raw_spin_lock+0x11e/0x1e0
[  151.797152]  ? mark_held_locks+0x34/0xb0
[  151.797784]  ? _raw_spin_unlock_irqrestore+0x30/0x70
[  151.798581]  ? __kthread_parkme+0x79/0x110
[  151.799246]  ? trace_preempt_on+0x2a/0xf0
[  151.799902]  ? __kthread_parkme+0x79/0x110
[  151.800579]  ? preempt_count_sub+0xd6/0x130
[  151.801271]  ? __kasan_check_read+0x11/0x20
[  151.801963]  ? __kthread_parkme+0xec/0x110
[  151.802630]  ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[  151.803569]  kthread+0x192/0x1d0
[  151.804104]  ? kthread_complete_and_exit+0x30/0x30
[  151.804881]  ret_from_fork+0x1f/0x30
[  151.805480]  </TASK>

[  151.806111] Allocated by task 1347:
[  151.806681]  kasan_save_stack+0x26/0x50
[  151.807308]  kasan_set_track+0x25/0x30
[  151.807920]  kasan_save_alloc_info+0x1e/0x30
[  151.808609]  __kasan_slab_alloc+0x63/0x80
[  151.809263]  kmem_cache_alloc+0x1ad/0x830
[  151.809916]  dlm_allocate_mhandle+0x17/0x20
[  151.810590]  dlm_midcomms_get_mhandle+0x96/0x260
[  151.811344]  _create_message+0x95/0x180
[  151.811994]  create_message.isra.29.constprop.64+0x57/0xc0
[  151.812880]  send_common+0x129/0x1b0
[  151.813467]  _convert_lock+0x46/0x150
[  151.814074]  convert_lock+0x7b/0xc0
[  151.814648]  dlm_lock+0x3ac/0x580
[  151.815199]  torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[  151.816258]  torture_ex_iter+0xc3/0xea [dlm_locktorture]
[  151.817129]  lock_torture+0x177/0x270 [dlm_locktorture]
[  151.817986]  kthread+0x192/0x1d0
[  151.818518]  ret_from_fork+0x1f/0x30

[  151.819369] Freed by task 1336:
[  151.819890]  kasan_save_stack+0x26/0x50
[  151.820514]  kasan_set_track+0x25/0x30
[  151.821128]  kasan_save_free_info+0x2e/0x50
[  151.821812]  __kasan_slab_free+0x107/0x1a0
[  151.822483]  kmem_cache_free+0x204/0x5e0
[  151.823152]  dlm_free_mhandle+0x18/0x20
[  151.823781]  dlm_mhandle_release+0x2e/0x40
[  151.824454]  rcu_core+0x583/0x1330
[  151.825047]  rcu_core_si+0xe/0x20
[  151.825594]  __do_softirq+0xf4/0x5c2

[  151.826450] Last potentially related work creation:
[  151.827238]  kasan_save_stack+0x26/0x50
[  151.827870]  __kasan_record_aux_stack+0xa2/0xc0
[  151.828609]  kasan_record_aux_stack_noalloc+0xb/0x20
[  151.829415]  call_rcu+0x4c/0x760
[  151.829954]  dlm_mhandle_delete+0x97/0xb0
[  151.830718]  dlm_process_incoming_buffer+0x2fc/0xb30
[  151.831524]  process_dlm_messages+0x16e/0x470
[  151.832245]  process_one_work+0x505/0xa10
[  151.832905]  worker_thread+0x67/0x650
[  151.833507]  kthread+0x192/0x1d0
[  151.834046]  ret_from_fork+0x1f/0x30

[  151.834900] The buggy address belongs to the object at ffff88811a980c30
                which belongs to the cache dlm_mhandle of size 88
[  151.836894] The buggy address is located 48 bytes inside of
                88-byte region [ffff88811a980c30, ffff88811a980c88)

[  151.839007] The buggy address belongs to the physical page:
[  151.839904] page:0000000076cf5d62 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a980
[  151.841378] flags: 0x8000000000000200(slab|zone=2)
[  151.842141] raw: 8000000000000200 0000000000000000 dead000000000122 ffff8881089b43c0
[  151.843401] raw: 0000000000000000 0000000000220022 00000001ffffffff 0000000000000000
[  151.844640] page dumped because: kasan: bad access detected

[  151.845822] Memory state around the buggy address:
[  151.846602]  ffff88811a980b00: fb fb fb fb fc fc fc fc fa fb fb fb fb fb fb fb
[  151.847761]  ffff88811a980b80: fb fb fb fc fc fc fc fa fb fb fb fb fb fb fb fb
[  151.848921] >ffff88811a980c00: fb fb fc fc fc fc fa fb fb fb fb fb fb fb fb fb
[  151.850076]                                                        ^
[  151.851085]  ffff88811a980c80: fb fc fc fc fc fa fb fb fb fb fb fb fb fb fb fb
[  151.852269]  ffff88811a980d00: fc fc fc fc fa fb fb fb fb fb fb fb fb fb fb fc
[  151.853428] ==================================================================
[  151.855618] Disabling lock debugging due to kernel taint

It is accessing a mhandle in dlm_midcomms_commit_mhandle() and the mhandle
was freed by a call_rcu() call in dlm_process_incoming_buffer(),
dlm_mhandle_delete(). It looks like it was freed because an ack of
this message was received. There is a short race between committing the
dlm message to be transmitted and getting an ack back. If the ack is
faster than returning from dlm_midcomms_commit_msg_3_2(), then we run
into a use-after free because we still need to reference the mhandle when
calling srcu_read_unlock().

To avoid that, we don't allow that mhandle to be freed between
dlm_midcomms_commit_msg_3_2() and srcu_read_unlock() by using rcu read
lock. We can do that because mhandle is protected by rcu handling.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fd: dlm: trace send/recv of dlm message and rcom

[ Upstream commit e01c4b7bd41522ae0299c07e2ee8c721fee02595 ]

This patch adds tracepoints for send and recv cases of dlm messages and
dlm rcom messages. In case of send and dlm message we add the dlm rsb
resource name this dlm messages belongs to. This has the advantage to
follow dlm messages on a per lock basis. In case of recv message the
resource name can be extracted by follow the send message sequence
number.

The dlm message DLM_MSG_PURGE doesn't belong to a lock request and will
not set the resource name in a dlm_message trace. The same for all rcom
messages.

There is additional handling required for this debugging functionality
which is tried to be small as possible. Also the midcomms layer gets
aware of lock resource names, for now this is required to make a
connection between sequence number and lock resource names. It is for
debugging purpose only.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 724b6bab0d75 ("fs: dlm: fix use after free in midcomms commit")
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: use packet in dlm_mhandle

[ Upstream commit 5b787667e87a373a2f8f70e6be2b5d99c408462f ]

To allow more than just dereferencing the inner header we directly point
to the inner dlm packet which allows us to dereference the header, rcom
or message structure.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 724b6bab0d75 ("fs: dlm: fix use after free in midcomms commit")
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: remove send repeat remove handling

[ Upstream commit 57a5724ef0b332eb6e78250157910a006b01bf6e ]

This patch removes the send repeat remove handling. This handling is
there to repeatingly DLM_MSG_REMOVE messages in cases the dlm stack
thinks it was not received at the first time. In cases of message drops
this functionality is necessary, but since the DLM midcomms layer
guarantees there are no messages drops between cluster nodes this
feature became not strict necessary anymore. Due message
delays/processing it could be that two send_repeat_remove() are sent out
while the other should be still on it's way. We remove the repeat remove
handling because we are sure that the message cannot be dropped due
communication errors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 724b6bab0d75 ("fs: dlm: fix use after free in midcomms commit")
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: start midcomms before scand

[ Upstream commit aad633dc0cf90093998b1ae0ba9f19b5f1dab644 ]

The scand kthread can send dlm messages out, especially dlm remove
messages to free memory for unused rsb on other nodes. To send out dlm
messages, midcomms must be initialized. This patch moves the midcomms
start before scand is started.

Cc: stable@vger.kernel.org
Fixes: e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: add midcomms init/start functions

[ Upstream commit 8b0188b0d60b6f6183b48380bac49fe080c5ded9 ]

This patch introduces leftovers of init, start, stop and exit
functionality. The dlm application layer should always call the midcomms
layer which getting aware of such event and redirect it to the lowcomms
layer. Some functionality which is currently handled inside the start
functionality of midcomms and lowcomms should be handled in the init
functionality as it only need to be initialized once when dlm is loaded.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: aad633dc0cf9 ("fs: dlm: start midcomms before scand")
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: fix log of lowcomms vs midcomms

[ Upstream commit 3e54c9e80e68b765d8877023d93f1eea1b9d1c54 ]

This patch will fix a small issue when printing out that
dlm_midcomms_start() failed to start and it was printing out that the
dlm subcomponent lowcomms was failed but lowcomms is behind the midcomms
layer.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: aad633dc0cf9 ("fs: dlm: start midcomms before scand")
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace

[ Upstream commit e32b120071ea114efc0b4ddd439547750b85f618 ]

Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes
/dev/kvm to userspace and thus allows userspace to create VMs (and call
other ioctls).  E.g. KVM will encounter a NULL pointer when attempting to
add a vCPU to the per-CPU loaded_vmcss_on_cpu list if userspace is able to
create a VM before vmx_init() configures said list.

 BUG: kernel NULL pointer dereference, address: 0000000000000008
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD 0 P4D 0
 Oops: 0002 [#1] SMP
 CPU: 6 PID: 1143 Comm: stable Not tainted 6.0.0-rc7+ #988
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
 RIP: 0010:vmx_vcpu_load_vmcs+0x68/0x230 [kvm_intel]
  <TASK>
  vmx_vcpu_load+0x16/0x60 [kvm_intel]
  kvm_arch_vcpu_load+0x32/0x1f0 [kvm]
  vcpu_load+0x2f/0x40 [kvm]
  kvm_arch_vcpu_create+0x231/0x310 [kvm]
  kvm_vm_ioctl+0x79f/0xe10 [kvm]
  ? handle_mm_fault+0xb1/0x220
  __x64_sys_ioctl+0x80/0xb0
  do_syscall_64+0x2b/0x50
  entry_SYSCALL_64_after_hwframe+0x46/0xb0
 RIP: 0033:0x7f5a6b05743b
  </TASK>
 Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel(+) kvm irqbypass

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: Move guts of kvm_arch_init() to standalone helper

[ Upstream commit 4f8396b96a9fc672964842fe7adbe8ddca8a3adf ]

Move the guts of kvm_arch_init() to a new helper, kvm_x86_vendor_init(),
so that VMX can do _all_ arch and vendor initialization before calling
kvm_init().  Calling kvm_init() must be the _very_ last step during init,
as kvm_init() exposes /dev/kvm to userspace, i.e. allows creating VMs.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: e32b120071ea ("KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Don't bother disabling eVMCS static key on module exit

[ Upstream commit da66de44b01e9b7fa09731057593850394bf32e4 ]

Don't disable the eVMCS static key on module exit, kvm_intel.ko owns the
key so there can't possibly be users after the kvm_intel.ko is unloaded,
at least not without much bigger issues.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: e32b120071ea ("KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Reset eVMCS controls in VP assist page during hardware disabling

[ Upstream commit 2916b70fc342719f570640de07251b7f91feebdb ]

Reset the eVMCS controls in the per-CPU VP assist page during hardware
disabling instead of waiting until kvm-intel's module exit.  The controls
are activated if and only if KVM creates a VM, i.e. don't need to be
reset if hardware is never enabled.

Doing the reset during hardware disabling will naturally fix a potential
NULL pointer deref bug once KVM disables CPU hotplug while enabling and
disabling hardware (which is necessary to fix a variety of bugs).  If the
kernel is running as the root partition, the VP assist page is unmapped
during CPU hot unplug, and so KVM's clearing of the eVMCS controls needs
to occur with CPU hot(un)plug disabled, otherwise KVM could attempt to
write to a CPU's VP assist page after it's unmapped.

Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20221130230934.1014142-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: e32b120071ea ("KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: change order inside nfc_se_io error path

commit 7d834b4d1ab66c48e8c0810fdeadaabb80fa2c81 upstream.

cb_context should be freed on the error path in nfc_se_io as stated by
commit 25ff6f8a5a3b ("nfc: fix memory leak of se_io context in
nfc_genl_se_io").

Make the error path in nfc_se_io unwind everything in reverse order, i.e.
free the cb_context after unlocking the device.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230306212650.230322-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: uhid: Over-ride the default maximum data buffer value with our own

commit 1c5d4221240a233df2440fe75c881465cdf8da07 upstream.

The default maximum data buffer size for this interface is UHID_DATA_MAX
(4k).  When data buffers are being processed, ensure this value is used
when ensuring the sanity, rather than a value between the user provided
value and HID_MAX_BUFFER_SIZE (16k).

Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>