Sandy Luo [Wed, 28 Nov 2018 07:16:57 +0000 (15:16 +0800)]
dts: fix SD card read issue for g12a board [2/3]
PD#SWPL-2588
Problem:
g12a u220/u221 boad cann't read SD card
Solution:
auto detect revA and revB chip
Verify:
test pass on u220/u221 board
Change-Id: Ia153bb3f966fe2a58d5f3ed1bf1d3f610d00ff5a
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
Peng Yixin [Fri, 12 Oct 2018 06:18:04 +0000 (14:18 +0800)]
display: Modify the value of register afbc_gclk_ctrl [1/1]
PD#SWPL-2565
Problem:
The splash screen problem for first frame after starting up.
Solution:
Modify the value of register afbc_gclk_ctrl.
Verify:
u211
Change-Id: Ie1ddfade0566ff8cd571c43ba8490a8c277a8758
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
Yi Zhou [Tue, 27 Nov 2018 02:31:16 +0000 (10:31 +0800)]
dv: fix the flickered problem [1/1]
PD#SWPL-1207
Problem:
fix the filckered problem when playing transition
video in sdr tv
Solution:
when dv core2 don't run, the reset can't be executed
Verify:
r321
Change-Id: I719325f1722589e02a40d46442258b0d1e3feb17
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Kaifu Hu [Thu, 22 Nov 2018 10:55:48 +0000 (18:55 +0800)]
hdmitx: disable encryption hdcp1.4 fail [1/1]
PD#SWPL-2302
Problem:
Play online video,half an hour later, the TV shows
a pink screen and the sound is normal.
Solution:
Check hdcp1.4 status and disable encryption when fail.
Verify:
S922X
Change-Id: I6ce51824726b267d140750f9e9d80aa8bb921cac
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Yong Qin [Wed, 21 Nov 2018 08:00:23 +0000 (16:00 +0800)]
cec: auto shutdown case crash [1/1]
PD#SWPL-2258
Problem:
1.running autoshutdown cause device crashed
Solution:
1.optimize cec power on proble flow
Verify:
1.p212
Change-Id: Ia78c76cdb4b72a1a275628b3ad77ea6d71696d89
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
hongmin hua [Wed, 14 Nov 2018 13:50:26 +0000 (21:50 +0800)]
cec: update cec platform data for tl1 [1/1]
PD#172587
Problem:
the line check always return low.
the print of check too much.
Solution:
modify the cec gpio from 7 to 10.
modify the check line.
Verify:
tl1 x301 board
Change-Id: I09ae5eee455d83e51e65957cd293e07da1c0046a
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Yong Qin [Mon, 12 Nov 2018 03:38:33 +0000 (11:38 +0800)]
cec: add device match for tl1 [1/1]
PD#172587
Problem:
add device match for tl1
Solution:
1.add cecb ver
2.add ceca status reg flag
Verify:
1.run TPM
2.run chip
Change-Id: I304abfd1d6f1f216f9f0c56ca19a8bdb2ccfeabb
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Chaomin Zheng [Mon, 26 Nov 2018 10:29:18 +0000 (18:29 +0800)]
DTS: p230 board config spdif out pin [3/3]
PD# SWPL-1223
Problem:
p230 board spdif out no audio sound
Solution:
config p230 board spdif out pin
Verify:
verify on p230
Change-Id: I0c35e6d526aab98955206f78322fcc873ff01b8c
Signed-off-by: Chaomin Zheng <chaomin.zheng@amlogic.com>
Zhongfu Luo [Tue, 27 Nov 2018 05:55:10 +0000 (13:55 +0800)]
dts: GXL/TXL: adjust defendkey_reserved location [1/1]
PD#SWPL-2539
Problem:
defendkey_reserved have influenced on display
during the system boot up
Solution:
adjust defendkey_reserved node location
Verify:
GXL/TXL skt board verify pass
Change-Id: I5cf0245f9653e20224c4e3bab1f6f05527011210
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
xiaoming.sui [Tue, 27 Nov 2018 03:12:23 +0000 (11:12 +0800)]
media: media_sync: remove serial port debug logs [1/1]
PD#SWPL-2494
Problem:
serial port always print timestamp log
Solution:
remove this log output
Verify:
P321
Change-Id: I875dffab483269374b9939f556a3ed01e9d2b215
Signed-off-by: xiaoming.sui <xiaoming.sui@amlogic.com>
wenfeng.guo [Tue, 20 Nov 2018 11:38:43 +0000 (19:38 +0800)]
deinterlace: fix CMA layout adaptation di_cma_reserved [1/1]
PD#SWPL-2308
Problem:
CMA layout adaptation di_cma_reserved cause crash
Solution:
fix CMA layout adaptation di_cma_reserved
Verify:
P321
Change-Id: Ia24e811a02d47d70afa1c06361fd0852c357394c
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
Hong Guo [Fri, 23 Nov 2018 02:34:07 +0000 (10:34 +0800)]
PM_SUSPEND: suspend: set wakeup reason to stick mem [2/2]
PD#SWPL-2287
Problem:
set wakeup reason to stick mem
Solution:
set wakeup reason to stick mem
Verify:
gxl,test pass
Change-Id: Iff6f1824ea4ac9ec12b8295d4283992fdac03b14
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Zhongfu Luo [Wed, 21 Nov 2018 10:14:23 +0000 (18:14 +0800)]
GXL: defendkey: support secure upgrade check [2/3]
PD#SWPL-2100
Problem:
GXL need to support secure upgrade check
Solution:
1.add dtb decrypt support
2.add 32bit defendkey support
Verify:
GXL skt board verify pass
Change-Id: I501967530b2a61d9b90c20241b82f92b00829453
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Zhongfu Luo [Thu, 22 Nov 2018 06:12:59 +0000 (14:12 +0800)]
dts: GXL: defendkey: support secure upgrade check [3/3]
PD#SWPL-2100
Problem:
GXL need to support secure upgrade check
Solution:
add defendkey support in all GXL dts
Verify:
GXL skt board verify pass
Change-Id: I73b84b86f23f512ddc556b61f3a07d015c717e8c
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
pengcheng chen [Tue, 30 Oct 2018 06:55:40 +0000 (14:55 +0800)]
osd: add meson-hwc repodution rate support [1/2]
PD#SWPL-1810
Problem:
osd blend repodution rate not supported
Solution:
add meson-hwc repodution rate support
Verify:
verified on u212 dev board
Change-Id: Ied10393e240e8d3f2a1eefe17a2d4d3c965e3383
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Thu, 22 Nov 2018 04:54:06 +0000 (12:54 +0800)]
osd: fix osd color error when osd hdr enabled [1/1]
PD#SWPL-1804
Problem:
osd color error when osd hdr enabled
Solution:
div alpha when osd hdr enabled
Verify:
verified on u212 dev board
Change-Id: I1f5ea0db404d1956f454bd5da2532bded89626ee
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Yi Zhou [Fri, 23 Nov 2018 06:37:32 +0000 (14:37 +0800)]
dv: fix osd color matrix when dv enabled [1/1]
PD#SWPL-1804
Problem:
fix osd color matrix when dv enabled
Solution:
enable osd matrix when dv enabled
Verify:
verified on u212 dev board
Change-Id: I4b4206f4d8c447873f23a3a0066af0d0fa85e18c
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
sky zhou [Sat, 24 Nov 2018 13:56:30 +0000 (21:56 +0800)]
framebuffer: remove lock in fbmem ioctl. [1/1]
PD#SWPL-2497
Problem:
on 32bit kernel, when user space call WAITFORVSYNC,
we cannot send other command to framebuffer.
Solution:
remove lock in fbioctl as fb compat_ioctl do.
Our driver have locks to protect internal resources.
Verify:
verified on franklin.
Change-Id: I1789c09a7ea459aed4b782748847687c7f974526
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
Sunny Luo [Mon, 15 Oct 2018 08:09:03 +0000 (16:09 +0800)]
spicc: fix miss bytes/time consume/loopback issue [1/1]
PD#SWPL-215
Problem:
1. additional or missing bytes be sent on mosi sometimes.
2. Customer DSP load firmware through SPICC. the loading time is 12s with
buildroot release
20180907 while 6s with
20180131.
3. rx error when work in loopback mode at high speed.
Solution:
1. change to disable irq at the irq-handle begining;
change to enable irq after all data pulled.
2. pre-setup of every spi transfer spends most of time on clk_set_rate().
this time is not obvious while cpu work at a high frequence such as
1000MHz.
In fact, a slave speed is almost fixed and we needn't set it for every
transfer but set only when speed changed.
3. disable auto io delay when in loopback mode.
Verify:
verified on axg-s400-v03 and tl1-skt
Change-Id: I61bcceccc243b218879b2b0711d0aff7538151f6
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Nian Jing [Fri, 23 Nov 2018 03:05:03 +0000 (11:05 +0800)]
vdac: fix atv/dtv resume no signal issue [1/1]
PD#SWPL-2351
Problem:
atv/dtv no signal when suspend after switch from hdmi
Solution:
disable vdac bandgap when suspend
Verify:
test pass on P321
Change-Id: I0449f0d9673f46928b8951249f5759a4a1f16562
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
MingLiang Dong [Fri, 23 Nov 2018 06:28:11 +0000 (01:28 -0500)]
vpp: fix p212 osd sdr2hdr luma too dark compile [1/1]
PD#SWPL-1707
Problem:
{NTS}Manual,HDR-001-TC2 Failed step 8/12/16/20 VID
and GFX doesn't match
Solution:
add osd hdr2sdr convert table for 400nit on p212
Verify:
verify on p212
Change-Id: I16637652b6d07ba81b25f46c2684ff7ae3e1c68c
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
MingLiang Dong [Mon, 19 Nov 2018 07:11:28 +0000 (02:11 -0500)]
vpp: fix p212 osd sdr2hdr luma too dark [1/1]
PD#SWPL-1707
Problem:
{NTS}Manual,HDR-001-TC2 Failed step 8/12/16/20 VID
and GFX doesn't match
Solution:
add osd hdr2sdr convert table for 400nit on p212
Verify:
verify on p212
Change-Id: I9a9dcf13ab0deaa8b676c5c409919367420b6d1b
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Jianxiong Pan [Fri, 23 Nov 2018 03:28:38 +0000 (11:28 +0800)]
ramdump: fix a warning of cast [1/1]
PD#165764
Problem:
have a warning of the "ram" variable cast.
Solution:
add a "void *" to the ram variable.
Verify:
test locally.
Change-Id: I037a89a28e98ae8c8ab965e908877bf4a72d3ead
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
wenfeng.guo [Wed, 21 Nov 2018 06:29:07 +0000 (14:29 +0800)]
dtv_demod: fix dtv demod crash switch once every 2s [1/1]
PD#SWPL-2293
Problem:
dtv demod switch once every 2s cause crash
Solution:
fix dtv demod crash switch once every 2s
Verify:
P321
Change-Id: Ibfd919a503e3dae41f51637cdff6e01ed27bac71
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
live.li [Thu, 22 Nov 2018 02:05:53 +0000 (10:05 +0800)]
avsync: tsync: fix the avsync problem [1/1]
PD#SWPL-1158
Problem:
The video will become un-smooth after change
between several audio languages
Solution:
when apts and vpts distance is large then 60*90000
then set the tsync mode to vmaster and set the tysnc
enable to 0
Verify:
P321
Change-Id: I7c7e32f49ca12645cf6a1aa58caeb968a9234c8c
Signed-off-by: live.li <live.li@amlogic.com>
tao zeng [Thu, 22 Nov 2018 08:01:36 +0000 (16:01 +0800)]
ramdump: add ramdump support for ARM32 [1/1]
PD#165764
Problem:
ramdump is not enabled on ARM32
Solution:
Enable it and fix compatible with ARM64
Verify:
R311
Change-Id: I337ef019ecab05d25b7d9dc0cacab7a03149aa7b
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
MingLiang Dong [Thu, 22 Nov 2018 10:37:45 +0000 (05:37 -0500)]
amvecm: pq: add dnlp/bri/contrast for tl1 [1/1]
PD#172587
Problem:
dnlp/bri/contrast can not finetune
Solution:
1. add dnlp regisiter 10bit write
2. add brightness/contrast/sr for tl1
Verify:
verify on tl1
Change-Id: I90b363f57fbf2cd485e2acaddb5ce60a8715a47b
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Wencai You [Tue, 20 Nov 2018 14:12:16 +0000 (22:12 +0800)]
irblaster: add synchronous transmit [1/1]
PD#SWPL-2170
Problem:
cts fail
android.hardware.consumerir.cts.ConsumerIrTest#test_timing
Solution:
add synchronous transmit
when it returns the pattern has been transmitted
Verify:
verify on franklin
Change-Id: I7e490236e5effc13f81e4fab3a1c7fc10c5dcfb3
Signed-off-by: Wencai You <wencai.you@amlogic.com>
Hong Guo [Thu, 22 Nov 2018 03:06:58 +0000 (11:06 +0800)]
vrtc: vrtc time update for stick mem [2/2]
PD#174867
Problem:
vrtc time update for stick mem.
Solution:
vrtc time update for stick mem.
Verify:
g12a txl.
Change-Id: I65074422569370b253882a4e66fb771da10ccdbf
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
guotai.shen [Fri, 16 Nov 2018 06:15:25 +0000 (14:15 +0800)]
dts: r314: increase board dts file [2/3]
PD#SWPL-1978
Problem:
bring up board r314.
Solution:
increase board dts file
feature:
The Dts file with Einstein is identical except for the memory difference
R314 1.5G, Einstein 1G.
Verify:
Verified on txlx_t962x_r314 board.
Change-Id: I271cb92a9cbcab174fb0bb76cfbc8beff9c730d3
Signed-off-by: guotai.shen <guotai.shen@amlogic.com>
Nanxin Qin [Wed, 21 Nov 2018 03:36:37 +0000 (11:36 +0800)]
dts: the memory of the reserved 1MB was recovered. [1/1]
PD#SWPL-2250
Problem:
h265 & vp9 4K playback abnormal because HEVC FRONT &
VPU READ2 pollute the phy address of near 0x0.
Solution:
it's only a temporary modification, the real reason
needs to take more time fixed.
Verify:
U212
Change-Id: I3dcc47f8979960e95c89cf53fe10eadc1a7ae5ad
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Renjiang Han [Thu, 8 Nov 2018 06:45:50 +0000 (14:45 +0800)]
ionvideo: Add thread stop protection when the process exits [1/1]
PD#SWPL-1689
Problem:
The thread still exists when the process exits
Solution:
Check if the thread exits when the process exits
Verify:
local
Change-Id: I6d805da6bfa0df85b6d39d065c95eed49b3cb7da
Signed-off-by: Renjiang Han <renjiang.han@amlogic.com>
Yonghui Yu [Thu, 8 Nov 2018 09:30:39 +0000 (17:30 +0800)]
mmc: fixup toshiba emmc secure discard [1/1]
PD#SWPL-1937
Problem:
secure discard and trim may cost 5mins on toshiba
"004GA0" emmc.
Solution:
using normal discard operation instead.
Verify:
W400
Change-Id: I7fd23867f8ae0af9192377de8f8c15609ef809ed
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
Jihong Sui [Fri, 21 Sep 2018 02:03:15 +0000 (10:03 +0800)]
deinterlace: fix kasan bug in di_task_handle [1/1]
PD#173820
Problem:
kasan bug in di_task_handle
Solution:
delete cma_mutex because it has no effect
Verify:
P321
Change-Id: Ie6ca7973576e7350870c5466b54b38b490dff65e
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
tao zeng [Wed, 21 Nov 2018 01:13:48 +0000 (09:13 +0800)]
ddr: fix dmc_monitor register bit missmatch on G12A/G12B [1/1]
PD#172256
Problem:
On G12A/G12B, bit for ddr0 protection 0 vilation is not same
Solution:
Fix bit missmatch problem
Verify:
U212
Change-Id: I5dca14c8bc96bdcb85dbe8bbd5a9a18157834bcf
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Zongdong Jiao [Thu, 1 Nov 2018 08:29:04 +0000 (16:29 +0800)]
hdmitx: fix wrong power uevent in suspend/resume [1/1]
PD#SWPL-1931
Problem:
Wrong hdmi_power uevent in suspend/resume flow
Solution:
Remove current mode judgement
Verify:
R321
Change-Id: Ib36e8d6cb4988f7b2be91146b12e974c194526ca
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Evoke Zhang [Fri, 2 Nov 2018 06:22:41 +0000 (14:22 +0800)]
backlight: ldim: update usage for new spi driver [1/1]
PD#SWPL-1603
Problem:
don't support old spi driver now
Solution:
update new spi driver api for ldim driver
Verify:
txlx r311
Change-Id: I4dff13e4cab5666a30488730e27c6275b933a922
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Xindong Xu [Fri, 26 Oct 2018 06:29:30 +0000 (14:29 +0800)]
dts: dtsi: add dtsi for ab update [1/6]
PD#SWPL-1513
Problem:
ab update can not work on P
Solution:
add dtsi for ab update for P
Verify:
test pass in ampere
Change-Id: I6ff219170a16c0081fba7297110e8dfaadcff401
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>
Yan Wang [Thu, 30 Nov 2017 08:40:26 +0000 (16:40 +0800)]
DolbyFW: Dolby Firmware Protection Driver create [1/1]
PD#SWPL-739
Problem:
Dolby Firmware Protection Driver create.
Solution:
AXG support Dolby Firmware Protection.
Verify:
AXG S400
Change-Id: Id88ba3f99103f2978827a3394203f7eef6d889f4
Signed-off-by: Yan Wang <yan.wang@amlogic.com>
Nan Li [Tue, 20 Nov 2018 03:43:26 +0000 (11:43 +0800)]
emmc: clean emmc reg val for probe [1/1]
PD#SWPL-2286
Problem:
emmc response crc error in emmc init.
Solution:
clean emmc reg val from uboot to kernel.
Verify:
w400
Change-Id: I6a4763187f18e9e284c887c5c788f3a88c8548ff
Signed-off-by: Nan Li <nan.li@amlogic.com>
yeping.miao [Fri, 31 Aug 2018 01:49:13 +0000 (09:49 +0800)]
arm64: dts: p230: add dvb module
PD#172865
Problem:
Customer requests a new release for linux dvb
Need enable dvb for QA testing
Solution:
Need enable dvb for QA testing
Verify:
Change-Id: Ib082c457d6f43ef4d6a5d16059a7e8ce068a332e
Signed-off-by: yeping.miao <yeping.miao@amlogic.com>
Xindong Xu [Tue, 16 Oct 2018 06:41:30 +0000 (14:41 +0800)]
reboot: reason: add reboot_reason quiescent [1/4]
PD#SWPL-1887
Problem:
Android TV need reboot_reason quiescent
Solution:
add reboot_reason quiescent
Verify:
ampere
Change-Id: Ie5a748faae05be93c56722b7806df6179116a047
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>
Shunzhou Jiang [Fri, 16 Nov 2018 07:54:52 +0000 (15:54 +0800)]
clk: g12a/g12b: fix 32bit set mpll clk overflow [1/1]
PD#SWPL-1933
Problem:
32bit system clk overflow
Solution:
let mpll clock not overflow
Verify:
g12b
Change-Id: Ie1c7c611e637776348bb35a3e0c1624cee57716f
Signed-off-by: shunzhou.jiang <shunzhou.jiang@amlogic.com>
Dezhi Kong [Wed, 14 Nov 2018 07:40:09 +0000 (15:40 +0800)]
vdin: enable vdin0 urgent for T950 default [1/1]
PD#TV-288
Problem:
There is flicker and jitter in HDMI
Solution:
enable vdin0 urgent for T950 default
Verify:
p321-T950
Change-Id: I17e472d7a47411093e9ade70a342807bed060a3a
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
wenfeng.guo [Thu, 15 Nov 2018 08:11:08 +0000 (16:11 +0800)]
deinterlace: fix di coverity & di_trace [1/1]
PD#SWPL-2138
Problem:
Fix di coverity & di_trace
Solution:
fix di coverity & di
Verify:
T962X-R311
Change-Id: I9be91832eeed89ebd715276c75414e4e6da55240
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
nengwen.chen [Mon, 12 Nov 2018 07:23:04 +0000 (15:23 +0800)]
atv_demod: Output big "PO" sound when change source from ATV [1/3]
PD#SWPL-318
Problem:
Output big "PO" sound when change source from ATV to others,
or switch between small window and full screen in ATV source.
Solution:
disable atv status early when exit ATV source.
Verify:
verified by p321
Change-Id: I82af7f8eaef181f1f72ef1f9d194e33c1efdcdb5
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Nan Li [Tue, 30 Oct 2018 11:33:47 +0000 (19:33 +0800)]
sdio: optimize sd & wifi TDMA [1/1]
PD#SWPL-1908
Problem:
sdio wifi error TDMA.
Solution:
optimize host reg value set error.
Verify:
u211 & u212
Change-Id: I0e0d52ac2bce42cf163f0065d46badc938832a65
Signed-off-by: Nan Li <nan.li@amlogic.com>
wenfeng.guo [Tue, 9 Oct 2018 10:03:28 +0000 (18:03 +0800)]
di: fix dump_status log error [1/1]
PD#174473
Problem:
dump_status log error
Solution:
fix dump_status log error
Verify:
verified in t962X_r311 board
Change-Id: I53cec7b93f6e2649bd527b8591995d54bec6450d
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
Bencheng Jing [Sat, 28 Apr 2018 11:10:10 +0000 (19:10 +0800)]
drm: pq: G12A DRM support gamma and ctm setting [1/1]
PD#165492
Problem:
G12A DRM add gamma and ctm setting support
Solution:
1. amvecm: add gamma apis for drm
2. drm: add gamma and ctm setting
Verify:
Verified on customer platfor
Change-Id: Iff5204ae7f719542463ac15140e471cd762c9c27
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Yi Zhou [Tue, 6 Nov 2018 11:43:35 +0000 (19:43 +0800)]
dv: set avi info limited range when dv output hdr mode [1/1]
PD#SWPL-1127
Problem:
when dv output hdr mode, the quantization range is default value
instead of limited range
Solution:
set quantization range to limited range in avi info
Verify:
t962e (txlx)
Change-Id: Ib4fbeb1c7efcedd7194143772ee5c663284a1c77
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Jianxiong Pan [Wed, 14 Nov 2018 02:11:35 +0000 (10:11 +0800)]
dts: modify the remaining 64bit dts to support 32bit [1/1]
PD#SWPL-2046
Problem:
some of the remaining 64bit boards do not support 32bit.
Solution:
modify the dts to support 32bit.
Verify:
axg, g12a, g12b, gxl, gxm, txl, txlx.
Change-Id: I951f8d32b18243a64e2abc5008bbb015c2e21e7a
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Peng Yixin [Tue, 13 Nov 2018 07:21:30 +0000 (15:21 +0800)]
media: fix some coverity error: [1/1]
PD#SWPL-2053
Problem:
Coverity detected some code defects.
Solution:
Fixed these code defects.
Verify:
Verified u212
Change-Id: Ie3c0907c7ee3db94f65f58aa5d5c96812a7fe38c
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
Nanxin Qin [Thu, 25 Oct 2018 02:42:17 +0000 (10:42 +0800)]
media: remap the addr to prevent crash on the 32bit & 2G board [1/1]
PD#SWPL-1909
Problem:
mem rw exception caused crashed.
Solution:
1. add mapping the highmem address by the func vmap().
2. remove the flag CODEC_MM_FLAGS_CPU if not necessary.
Verify:
p212, w400
Change-Id: I982c775d7c009335cae5802f0eb6287d22037db6
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
tao zeng [Fri, 9 Nov 2018 04:10:49 +0000 (12:10 +0800)]
dts: change CMA layout [1/1]
PD#SWPL-1909
Problem:
On 32bit kernel, codec cma is located in normal zone by
"alloc-ranges" parameter with large size. This takse up
memory space for kernel and drivers. Sometimes we can see
memory allocation fail log but there are still enought
free pages. But most of these pages are CMA pages.
Solution:
Move codec cma location to high memzone. On 32bit, low
768MB memory is normal zone.
This change also correct first 1MB memory lost problem
for chips later than TXLX
Verify:
P212
Change-Id: I4592d34d08ee4dbb6700bbbfc4e0fadaceab0310
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
huaihao.guo [Fri, 2 Nov 2018 11:10:19 +0000 (19:10 +0800)]
deinterface: add afbc support on g12a and txlx [1/1]
PD#SWPL-1618
Problem:
Add afbc support on g12a and txlx
Solution:
add afbc support on g12a and txlx
Verify:
T962X-R311, U200(G12A)
Change-Id: Ia0cce8516a98653b01c3bc628e812c3a81b1df59
Signed-off-by: huaihao.guo <huaihao.guo@amlogic.com>
Huan Biao [Thu, 15 Nov 2018 07:24:23 +0000 (15:24 +0800)]
thermal: sensor: fix thermal disabled mode issue [1/1]
PD#SWPL-2130
Problem:
tsensor driver update thermal event when mode disabled
Solution:
fix tsensor disable mode issue
Verify:
A311D W400 pass
Change-Id: If9e3d3ea15732a0efbd8314003b27bc0bdf3e476
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
MingLiang Dong [Thu, 11 Oct 2018 03:20:17 +0000 (23:20 -0400)]
amvecm: overscan: fix video local play, screen mode set error [1/1]
PD#SWPL-206
Problem:
overscan set error when local play
Solution:
overscan don't set at vpp
Verify:
verify on txlx
Change-Id: Ifd4ad4f5fcdb9fbc7ad05a540d0ed11b24d4ca66
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
live.li [Wed, 14 Nov 2018 02:15:00 +0000 (10:15 +0800)]
tsync: tsync change the apts set code [1/2]
PD#SWPL-1774
Problem:
DD program has avysnc problem over one night play
Solution:
fix the apts set bug
Verify:
p321
Change-Id: I0f6a5b47d3e3171a3dd8fa9a0b721cd11ec20b9e
Signed-off-by: live.li <live.li@amlogic.com>
Zongdong Jiao [Fri, 9 Nov 2018 06:57:29 +0000 (14:57 +0800)]
hdmitx: remove a wrong Y422 format judgement [1/1]
PD#IPTV-55
Problem:
When connect to a Samsung TV(support 4k60 422 12bit), get a wrong
0 of 'echo 2160p60hz422,12bit > valid_mode'
Solution:
Remove a wrong Y422 format judgement
Verify:
P212
Change-Id: Ic0f2cefc1e0893390ac38298b55272877d81e04b
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Zongdong Jiao [Sat, 29 Sep 2018 10:16:08 +0000 (18:16 +0800)]
hdmitx: enable repeater_tx in r321/atom dts [2/3]
PD#SWPL-1303
Problem:
For TXLX/T962E/R321 cases, there are both HDMI TX and RX.
Should consider it as repeater.
Solution:
Enable repeater_tx in r321/atom dts
Also, add a missing ksv_lists[] clear.
Verify:
r321/atom
Change-Id: I7b512c34123481380220f9262466fde56b0ae6e3
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Jian Xu [Wed, 7 Nov 2018 14:00:44 +0000 (22:00 +0800)]
audio: fix audio driver del_timer BUG_ON crash issue [1/1]
PD#SWPL-972
Problem:
audio crash when ATV switch channel long time burning test
Solution:
there is a risk to fetch the timer lock. when input stop, stop_timer
will call del_timer, at the same time the function
"aml_i2s_hrtimer_callback" is waiting for the timer lock,after
stop_timer release the lock,"aml_i2s_hrtimer_callback" get the
lock and call mod_timer again, which will set the timer to pending
status. It will cause the next "start input" stage,add_timer will
trigger BUG_ON.Now we put the lock before the active status
checking then we will not touch the timer.
Verify:
Need burning test
Change-Id: I1fb66903a4d31e9491ac0533e477e1597575d4cf
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
Hong Guo [Fri, 9 Nov 2018 07:18:20 +0000 (15:18 +0800)]
arm64: dts: g12a: fine-tune voltage OPP [1/1]
PD#165143
Probleļ¼
fine-tune voltage OPP
Solution:
fine-tune voltage OPP
Verify:
G12A/G12B,PASS
Change-Id: I0b3fb0e4624e2ddfa635c8225a740ed7a8ff3e51
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Bo Yang [Sat, 3 Nov 2018 02:22:02 +0000 (10:22 +0800)]
arm: dts: gxl: replace watchdog with new version [1/1]
PD#SWPL-1600
Problem:
The current watchdog is not the upstream standard driver.
Solution:
Replace watchdog device tree to use the standard watchdog driver.
Verify:
S905X P215/P212 Android-32bit Kernel-32bit.
Change-Id: I972c8ebb0158caa2df393d9a2d687d9298181102
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
wenbiao zhang [Fri, 12 Oct 2018 07:28:54 +0000 (15:28 +0800)]
ddr: detect bandwidth except mali and reduce bandwidth [2/3]
PD#SWPL-122
Problem:
ddr bandwidth is tightly in many cases, such as HDR/4K video playing,
and then refresh osd at the same time
Solution:
in most cases the problem is refreshing osd when bandwidth tightly,
so detect ddr bandwidth usage except mali and reduce it when it is tightly
Verify:
verify by p321/r311
Change-Id: Ia594f08dbe9a8a7a8d78b5104c93bddaa8229c0b
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
Jianxiong Pan [Wed, 7 Nov 2018 07:27:43 +0000 (15:27 +0800)]
dts: fix some errors on g12b_w400 for 32bit [1/1]
PD#SWPL-1010
Problem:
some errors of reg address.
Solution:
modify to support 32bit.
Verify:
w400.
Change-Id: Ia35e95ac59084a9c57a9a4ab32fecb64f78c772e
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
pengcheng chen [Mon, 29 Oct 2018 07:08:04 +0000 (15:08 +0800)]
osd: add hdr mode set via meson-hwc support [1/1]
PD#163001
Problem:
hdr mode set not supported
Solution:
add hdr mode set via meson-hwc support
Verify:
verified in u200 board
Change-Id: Iaad75982003870f9469e4155aedb9c13349b60b9
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Mon, 5 Nov 2018 08:59:10 +0000 (16:59 +0800)]
osd: uboot logo scaler down in 4k issue [1/1]
PD#163001
Problem:
uboot logo scaler down in 4k
Solution:
uboot logo size adjust when vout changed before
first page flip command
Verify:
verified in u200 board
Change-Id: Ic23e695fe716811eaf3faa62069c808a03c26f9d
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Jianxiong Pan [Fri, 9 Nov 2018 09:02:52 +0000 (17:02 +0800)]
smartcard: fix defects for coverity [1/1]
PD#166793
Problem:
conditional statement not is valid.
Solution:
change type u32 to type int.
Verify:
module owner confirmed.
Change-Id: I9fdfa444b29104c7afc9b7a380748ebe82ed390b
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
pengcheng chen [Thu, 1 Nov 2018 12:22:29 +0000 (20:22 +0800)]
osd: osd shift-workaround one line fixed [1/1]
PD#163001
Problem:
current osd code have one line missing issue in meson-hwc
Solution:
osd blend used +1 line to fix shift issue,
and used freescale to cut it.
Verify:
verified in u200 board
Change-Id: I2354742d456327d9f1aa5713ee782648895034db
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Wed, 31 Oct 2018 11:32:59 +0000 (19:32 +0800)]
osd: meson-hwc screen always blank [1/1]
PD#163001
Problem:
TL1 code merged caused meson-hwc screen always blank
Solution:
fix meson-hwc screen always blank
Verify:
verified in u200 board
Change-Id: I0a9371b42546e2713e6dcb926e7c94598e29da1d
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Nian Jing [Thu, 1 Nov 2018 12:55:47 +0000 (20:55 +0800)]
vout: add bist test on vout [1/1]
PD#SWPL-1630
Problem:
add cvbs/hdmi/lcd bist test on vout
Solution:
add cvbs bist test on vout
Verify:
test pass on u200/p212
Change-Id: Ie61d9b0d63649ec3022fd720068b689f4d721e3b
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Yong Qin [Tue, 6 Nov 2018 01:31:51 +0000 (09:31 +0800)]
cec: for support multi-logical address [1/1]
PD#SWPL-418
Problem:
cec: support multi-logical address
Solution:
if working on multi-logical address, enable two ip
1.enable cec_a, cec_b
2.enable two interrupt
3.enable two pinmux oa_7, ao_8
4.cec_a only send all msg
5.cec_b only receive all msg
6.discard ceca broadcast msg
Verify:
r311
r321
p321
Change-Id: I1dc93429876ede951657102bcd7d41a500946719
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
nengwen.chen [Thu, 8 Nov 2018 11:57:53 +0000 (19:57 +0800)]
atv_demod: pc bad value in panic after change source [1/1]
PD#SWPL-1636
Problem:
1.pc bad value in kernel panic after change source.
2.System crash down when change source.
Solution:
optimize atv demod code.
Verify:
verified by p321
Change-Id: I655d1253950475dfb49ae1b174597797000adb73
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Dezhi Kong [Tue, 30 Oct 2018 09:30:48 +0000 (17:30 +0800)]
vlock: optimize vlock process for interlace input [1/1]
PD#SWPL-743
Problem:
The picthre is shaking when press DVD remote
control in AV source
Solution:
add delay work for vlock process interlace input
Verify:
T962X-R311
Change-Id: Ic2ed077e0684ecc6b0990336e7a4ab7022931886
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Jianxiong Pan [Fri, 9 Nov 2018 11:22:53 +0000 (19:22 +0800)]
script: segments can appear in descriptive information [1/1]
PD#174488
Problem:
segmentation in descriptive information is reasonable and
should be allowed.
Solution:
modify the check codes.
Verify:
test locally.
Change-Id: I5e34ef2dd26077bb54adee7597a1aa3c789566c9
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Huan Biao [Fri, 9 Nov 2018 09:09:54 +0000 (17:09 +0800)]
vccktest: add vccktest dts for buildroot [1/1]
PD#174851
Problem:
buildroot no vccktest dts
Solution:
add vccktest dts
Verify:
g12a/g12b test pass
Change-Id: I6907fa3cfc087ac84395956ddbda678f7a5e3f4b
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Jianxiong Pan [Fri, 9 Nov 2018 07:11:30 +0000 (15:11 +0800)]
dts: modified atom.dts support 32bit. [1/1]
PD#SWPL-1942
Problem:
add atom.dts support 32bit.
Solution:
modified length of reg, mem etc.
Verify:
r321
Change-Id: I2a518af2a76b8cb17ded68e994c3065072b92b9c
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Jun Zhang [Wed, 7 Nov 2018 07:59:16 +0000 (15:59 +0800)]
dts: add isp and galcore support to w400-buildroot [1/2]
PD#SWPL-1819
Problem:
lack of isp and galcore support in buildroot dts
Solution:
merge configurations from skt board
Verify:
local
Change-Id: I5936341fc24719f345c7707e16e692ae292ca6fe
Signed-off-by: Jun Zhang <jun.zhang@amlogic.com>
Zhi Zhou [Wed, 27 Jun 2018 07:44:45 +0000 (15:44 +0800)]
video: merged from A wait AFBC idle when report state [1/1]
PD#169128:
[Problem]
When quick switch video between 2 vsync isr, the AFBC may read wrong
data, and green screen or distortion image occurs.
[Solution]
1. Add delay when get video layer state, to make sure afbc is stopped
2. Remove ambiguous log print
[Platform]
Blanche
BranchTo: NONE
[Test]
Change-Id: I94ccf25373f29ce188829ab1b7db6f9df1fb49ad
Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com>
tao zeng [Tue, 6 Nov 2018 06:02:57 +0000 (14:02 +0800)]
mm: clear MMU mapping for secure os memory [1/1]
PD#SWPL-1631
Problem:
If Cortex A73 accessed memory near secure memory range, an
SError may occur due to prefetch of A73 core.
Solution:
Add clear mmu property for arm platform
Verify:
W400
Change-Id: I2e396f77772aeea231d0bf5f38a81440117ecdd6
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
yicheng shen [Thu, 1 Nov 2018 08:27:19 +0000 (04:27 -0400)]
hdmirx: fix sound noise when switch hdmi port [1/1]
PD#SWPL-1224
Problem:
There will sound noise when switch hdmi port.
Solution:
Remove bandgap off when close port.
Verify:
Locally
Change-Id: Ibd9be3aa6f32072918f7b1ec151463452b2b879a
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
jiejing.wang [Mon, 22 Oct 2018 11:05:23 +0000 (19:05 +0800)]
audio: fix errors of coverity [1/1]
PD#166793
Problem:
coverity check errors of format
Solution:
fix err
Verify:
verify locally
Change-Id: Ie3a404fe50c5bdaa6a9cf4a4194659502defdbd2
Signed-off-by: jiejing.wang <jiejing.wang@amlogic.com>
Yingyuan Zhu [Fri, 26 Oct 2018 12:14:06 +0000 (20:14 +0800)]
adc_key: delete early_suspend code [1/1]
PD#OTT-144
Problem:
after the dark screen, the adc button does not work
Solution:
The adc_keypad introduces earlysuspend for MID project:
after the LCD backlight disable, prevent the user from
pressing the key to open some applications and not complete standby.
Now check the adc button using the "system_freezable_wq" system queue,
which replaces the function of the code.So can remove it.
Verify:
g12b socket
Change-Id: I2333ba3dc406d2624962d116293a0b9d36f97534
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Ruixuan Li [Wed, 31 Oct 2018 06:41:58 +0000 (14:41 +0800)]
emmc: Modify delay of command line to 1/4 command window [1/1]
PD#SWPL-1184
Problem:
emmc data crc error
Solution:
Modify delay of command line
Verify:
A113d_s400
Change-Id: I7211da9da75569aebaf0c2790e3134e88a6f3077
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Jianxin Pan [Tue, 30 Oct 2018 10:08:09 +0000 (18:08 +0800)]
aarch64: enable swp software emulation [1/1]
PD#IPTV-14
Problem:
3D Benchmark.apk crash
Solution:
Add swp instruction support on armv8
Verify:
local
Change-Id: Ice2bef5c0ef7110b3adb4af811f99d4bfca1e8dc
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Lei Qian [Mon, 5 Nov 2018 12:22:13 +0000 (20:22 +0800)]
cec: revert changesy [1/1]
PD#SWPL-418
Problem:
TXL can't bootup
Solution:
revert it
Verify:
p321
Revert "cec: for support multi-logical address [2/2]"
This reverts commit
cc185dc81dc63317c8498e7fcc4726c6f48ed03d.
Revert "cec: for support multi-logical address [1/2]"
This reverts commit
b7922078ea9e7a8ce6cfb7592fb5293a5fd3e9a2.
Change-Id: I1cef0ac194464d75ffff3fe765f15b5f944406b2
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
tao zeng [Fri, 2 Nov 2018 11:10:16 +0000 (19:10 +0800)]
mm: clear MMU mapping for secure os memory [1/1]
PD#SWPL-1631
Problem:
If Cortex A73 accessed memory near secure memory range, an
SError may occur due to prefetch of A73 core.
Solution:
Remove mmu maping of secure memory range.
Note: must add clear-map and set clear range property in DTS
Verify:
W400
Change-Id: I718919c1b4873584eb87e00332622a1626672808
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Zhi Zhou [Fri, 14 Sep 2018 07:32:06 +0000 (15:32 +0800)]
codec_mm: add reserved & cma support for 4.9. [1/1]
PD#172483
Problem:
Add reserved & cma support for 4.9.
Solution:
1. add tvp padding, for test.
2. add no-cma-tvp,to force not used cma for tvp.
3. add nomap for reserved memroy detective.
4. add res & cma two mem region on same board.
5. add clear-map property for codec_mm_cma.
Verify:
Test this function with Android_O-MR1(GTVS) & ExoPlayer.
Change-Id: Ib20e0e9bc4725afb271de97543ce5ebf3bfcfb29
Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com>
Tao Zeng [Mon, 5 Nov 2018 08:33:19 +0000 (00:33 -0800)]
Merge "audio: solve av out output level low issue [2/2]" into amlogic-4.9-dev
Nan Li [Mon, 15 Oct 2018 09:22:12 +0000 (17:22 +0800)]
emmc: ffu: add emmc ffu update support [1/1]
PD#174683
Problem:
kernel emmc ffu is not supported.
Solution:
add emmc ffu update support with mmc untils.
Verify:
p212
Change-Id: Ice9ffb174c061e3f114b0b68af290492808b0a5e
Signed-off-by: Nan Li <nan.li@amlogic.com>
Yong Qin [Wed, 26 Sep 2018 01:14:40 +0000 (09:14 +0800)]
cec: for support multi-logical address [2/2]
PD#SWPL-418
Problem:
cec: support multi-logical address
Solution:
1.enable cec_a, cec_b
2.enable two interrupt
3.enable two pinmux oa_7, ao_8
4.cec_a only send all msg
5.cec_b only receive all msg
6.discard ceca broadcast msg
Verify:
r311 r321
Change-Id: I8f983ed6ad329ca5ec0144587a7ad1f03ad68031
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yong Qin [Wed, 26 Sep 2018 01:12:30 +0000 (09:12 +0800)]
cec: for support multi-logical address [1/2]
PD#SWPL-418
Problem:
cec: for support mult-logical address
Solution:
1.add interface: remove logical address
2.for support multi-logical address
Verify:
r311 r321
Change-Id: I9ea8b1004f43fb84855d41dd684c117fa5cbd7ae
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Jianxiong Pan [Mon, 29 Oct 2018 06:44:26 +0000 (14:44 +0800)]
dts: sync difference between arch32 and arch64 [1/1]
PD#SWPL-959
Problem:
sync arch32 and arch64 dts.
Solution:
sync arch32 and arch64 dts.
Verify:
r311
Change-Id: I493c83f38899628ac65c637e81f053a7c22bd24f
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Jianxiong Pan [Mon, 29 Oct 2018 08:25:21 +0000 (16:25 +0800)]
dts: support 32bit for gxl_p230 [1/1]
PD#SWPL-1116
Problem:
add support 32bit for gxl_p230.
Solution:
add 32bit dts for gxl_p230.
Verify:
gxl_p230
Change-Id: Icc62c45e7bd36e8248ad0bb11a67a0151cf7ea34
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
guotai.shen [Fri, 2 Nov 2018 08:40:49 +0000 (16:40 +0800)]
display: dts modify [1/1]
PD#TV-405
Problem:
Should create a 720p ui display mode on p321.
Solution:
Created a folder named t962_p321_720p under device/amlogic
and modified some variate.
The diffs that compare with txl_t962_p321.dts
amlogic-dt-id = "txl_p321_v1_720p";
size = <0x400000>;
alloc-ranges = <0x3fc00000 0x400000>;
mem_size = <0x00400000 0x00b00000 0x00100000>;
/* uboot logo,fb0/fb1 memory size,if afbcd fb0=0x0b51000*/
display_mode_default = "720p60hz";
/*1280*720*4*3 = 0xA8C000*/
display_size_default = <1280 720 1280 2160 32>;
logo_addr = "0x3fc00000";
Verify:
p321
Change-Id: Ia397cd6cbcf4fdd9fb139259099805bdad90b92f
Signed-off-by: Guotai Shen <guotai.shen@amlogic.com>
Jianxiong Pan [Thu, 25 Oct 2018 06:31:43 +0000 (14:31 +0800)]
dts: support 32bit for g12b_w400 [1/1]
PD#SWPL-1010
Problem:
add support 32bit for g12b_w400
Solution:
add 32bit dts of g12b_w400.
Verify:
g12b_a311d_w400
Change-Id: I30ac9cb80721b04a13532ceb5c14f76bdf1cc575
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Zongdong Jiao [Thu, 1 Nov 2018 11:25:52 +0000 (19:25 +0800)]
hdmitx: add feature limited [3/3]
PD#174490
Problem:
Lack feature limited for certain types
Solution:
Add feature limited for certain types
Verify:
TBD
Change-Id: Ifbe104fe98fe1e3875f2f1af7793348856275b92
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Qiufang Dai [Tue, 23 Oct 2018 09:04:20 +0000 (17:04 +0800)]
chipid: meson: add ops id for S805Y [1/2]
PD#SWPL-940
Problem:
Need ops id api for S805Y
Solution:
Add ops id api
Verify:
s805y_p215
Change-Id: I179f87acbc3f57456e0359bd0d502c58cc3a9b9c
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Lianlian Zhu [Thu, 18 Oct 2018 12:01:18 +0000 (20:01 +0800)]
audio: solve av out output level low issue [2/2]
PD#SWPL-766
Problem:
av output level only 100mv
Solution:
change the channel map for av out,
use orignal pcm for output w/o volume
control and postprocess.
Verify:
verified by r311
Change-Id: Ibeaf0ecfda03f81ff6061dc9c4975049452ba659
Signed-off-by: Lianlian Zhu <lianlian.zhu@amlogic.com>
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
qi duan [Thu, 18 Oct 2018 10:21:57 +0000 (18:21 +0800)]
USB: host: tuning disconnect threshold on g12a/g12b [2/2]
PD#174736
Problem:
Some usb device may disconnect when handshake
Solution:
tuning disconnect threshold when usb host initial
now default is 0x24, only three value can tuning, 0x2c,0x34,0x3c
we set 0x34 now
Verify:
Google estelle boards which return from factory
no side effect on refernce u200 board
Change-Id: I71d974a6bac43452b20bd7f2a6827d3a46fa39fb
Signed-off-by: qi duan <qi.duan@amlogic.com>
projects / platform / kernel / linux-amlogic.git / log