Dirk Brandewie [Thu, 8 May 2014 19:57:24 +0000 (12:57 -0700)]
intel_pstate: remove setting P state to MAX on init
commit
d40a63c45b506b0681918d7c62a15cc9d48c8681 upstream.
Setting the P state of the core to max at init time is a hold over
from early implementation of intel_pstate where intel_pstate disabled
cpufreq and loaded VERY early in the boot sequence. This was to
ensure that intel_pstate did not affect boot time. This in not needed
now that intel_pstate is a cpufreq driver.
Removing this covers the case where a CPU has gone through a manual
CPU offline/online cycle and the P state is set to MAX on init and the
CPU immediately goes idle. Due to HW coordination the P state request
on the idle CPU will drag all cores to MAX P state until the load is
reevaluated when to core goes non-idle.
Reported-by: Patrick Marlier <patrick.marlier@gmail.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dirk Brandewie [Thu, 8 May 2014 19:57:23 +0000 (12:57 -0700)]
intel_pstate: Set turbo VID for BayTrail
commit
21855ff5bcbdd075e1c99772827a84912ab083dd upstream.
A documentation update exposed that there is a separate set of VID
values that must be used in the turbo/boost P state range. Add
enumerating and setting the correct VID for P states in the turbo
range.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olof Johansson [Fri, 11 Apr 2014 22:19:41 +0000 (15:19 -0700)]
i2c: s3c2410: resume race fix
commit
ce78cc071f5f541480e381cc0241d37590041a9d upstream.
Don't unmark the device as suspended until after it's been re-setup.
The main race would be w.r.t. an i2c driver that gets resumed at the same
time (asyncronously), that is allowed to do a transfer since suspended
is set to 0 before reinit, but really should have seen the -EIO return
instead.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Du, Wenkai [Thu, 10 Apr 2014 23:03:19 +0000 (23:03 +0000)]
i2c: designware: Mask all interrupts during i2c controller enable
commit
47bb27e78867997040a228328f2a631c3c7f2c82 upstream.
There have been "i2c_designware
80860F41:00: controller timed out" errors
on a number of Baytrail platforms. The issue is caused by incorrect value in
Interrupt Mask Register (DW_IC_INTR_MASK) when i2c core is being enabled.
This causes call to __i2c_dw_enable() to immediately start the transfer which
leads to timeout. There are 3 failure modes observed:
1. Failure in S0 to S3 resume path
The default value after reset for DW_IC_INTR_MASK is 0x8ff. When we start
the first transaction after resuming from system sleep, TX_EMPTY interrupt
is already unmasked because of the hardware default.
2. Failure in normal operational path
This failure happens rarely and is hard to reproduce. Debug trace showed that
DW_IC_INTR_MASK had value of 0x254 when failure occurred, which meant
TX_EMPTY was unmasked.
3. Failure in S3 to S0 suspend path
This failure also happens rarely and is hard to reproduce. Adding debug trace
that read DW_IC_INTR_MASK made this failure not reproducible. But from ISR
call trace we could conclude TX_EMPTY was unmasked when problem occurred.
The patch masks all interrupts before the controller is enabled to resolve the
faulty DW_IC_INTR_MASK conditions.
Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: improved the comment and removed typo in commit msg]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wolfram Sang [Mon, 5 May 2014 16:36:21 +0000 (18:36 +0200)]
i2c: rcar: bail out on zero length transfers
commit
d7653964c590ba846aa11a8f6edf409773cbc492 upstream.
This hardware does not support zero length transfers. Instead, the
driver does one (random) byte transfers currently with undefined results
for the slaves. We now bail out.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Fri, 16 May 2014 19:10:41 +0000 (21:10 +0200)]
ACPI / video: Revert native brightness quirk for ThinkPad T530
commit
07d1d29ee1e194b932328ad2dc1d40297062ab7f upstream.
Seems it helps some users, but causes issues for other users:
https://bugzilla.redhat.com/show_bug.cgi?id=1089545
So lets drop it for now until we've figured out a better fix.
Fixes:
43d949024425 (ACPI / video: Add use_native_backlight quirks for more systems)
References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Lu [Tue, 13 May 2014 01:51:50 +0000 (09:51 +0800)]
ACPI / video: correct DMI tag for Dell Inspiron 7520
commit
5ff365fb6aed4c7ee5aae7b0239ce0b514aefabc upstream.
The DMI tag used to identify Dell Inspiron 7520 should be product name
instead of product version.
Fixes:
0e9f81d3b7cd (ACPI / video: Add systems that should favour native backlight interface)
Reported-and-tested-by: Téo Mazars <teomazars@gmail.com>
References: https://bugzilla.redhat.com/show_bug.cgi?id=909552
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Sun, 11 May 2014 23:13:28 +0000 (01:13 +0200)]
ACPI / TPM: Fix resume regression on Chromebooks
commit
f759546498d820670934c901a2fdf1ce948d2e5c upstream.
Chromebooks (at least Acer C720 and Pixel) implement an ACPI object
for TPM, but don't implement the _DSM method to support PPI. As
a result, the TPM driver fails to load on those machines after
commit
1569a4c4ceba (ACPI / TPM: detect PPI features by checking
availability of _DSM functions) which causes them to fail to
resume from system suspend, becuase they require the TPM hardware
to be put into the right state during resume and the TPM driver
is necessary for that.
Fix the problem by making tpm_add_ppi() return 0 when tpm_ppi_handle
is still NULL after walking the ACPI namespace in search for the PPI
_DSM, which allows the TPM driver to load and operate the hardware
(during system resume in particular), but avoid creating the PPI
sysfs group in that case.
This change is based on a prototype patch from Jiang Liu.
Fixes:
1569a4c4ceba (ACPI / TPM: detect PPI features by checking availability of _DSM functions)
References: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Reported-by: James Duley <jagduley@gmail.com>
Reported-by: Phillip Dixon <phil@dixon.gen.nz>
Tested-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Edward Lin [Wed, 7 May 2014 02:47:24 +0000 (10:47 +0800)]
ACPI: blacklist win8 OSI for Dell Inspiron 7737
commit
b753631b3576bf343151a82513c5d56fcda1e24f upstream.
With win8 capabiltiy, the machine will boot itself immediately after
shutdown command has executed.
Work around this issue by disabling win8 capcability. This workaround
also makes wireless hotkey work.
Signed-off-by: Edward Lin <yidi.lin@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Wed, 7 May 2014 02:18:28 +0000 (19:18 -0700)]
ACPI: Revert "ACPI / AC: convert ACPI ac driver to platform bus"
commit
98012849e0cbf980326f8e34d571f4474866a88e upstream.
Revert commit
cc8ef5270734 (ACPI / AC: convert ACPI ac driver to
platform bus) that is reported to break thermal management on
MacBook Air 2013 with ArchLinux.
Fixes:
cc8ef5270734 (ACPI / AC: convert ACPI ac driver to platform bus)
References: https://bugzilla.kernel.org/show_bug.cgi?id=71711
Cc: Zhang Rui <rui.zhang@intel.com>
Reported-and-tested-by: Manuel Krause <manuelkrause@netscape.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Mammedov [Mon, 5 May 2014 20:49:49 +0000 (22:49 +0200)]
ACPI / processor: do not mark present at boot but not onlined CPU as onlined
commit
0b9d46dd7debf8e6dc8614106f1c1909fa8de64d upstream.
acpi_processor_add() assumes that present at boot CPUs
are always onlined, it is not so if a CPU failed to become
onlined. As result acpi_processor_add() will mark such CPU
device as onlined in sysfs and following attempts to
online/offline it using /sys/device/system/cpu/cpuX/online
attribute will fail.
Do not poke into device internals in acpi_processor_add()
and touch "struct device { .offline }" attribute, since
for CPUs onlined at boot it's set by:
topology_init() -> arch_register_cpu() -> register_cpu()
before ACPI device tree is parsed, and for hotplugged
CPUs it's set when userspace onlines CPU via sysfs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 5 May 2014 09:38:09 +0000 (11:38 +0200)]
ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PX
commit
f6e6e1b9fee88c90586787b71dc49bb3ce62bb89 upstream.
Without this this EEE PC exports a non working WMI interface, with this it
exports a working "good old" eeepc_laptop interface, fixing brightness control
not working as well as rfkill being stuck in a permanent wireless blocked
state.
This is not an ideal way to fix this, but various attempts to fix this
otherwise have failed, see:
References: https://bugzilla.redhat.com/show_bug.cgi?id=1067181
Reported-and-tested-by: lou.cardone@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 5 May 2014 09:38:08 +0000 (11:38 +0200)]
ACPI / video: Add use_native_backlight quirks for more systems
commit
43d9490244254d2d6adb0f3c6275c7b8d032a2dd upstream.
ThinkPad T430: extend the T430s entry to also cover the T430 (note we also
have another entry for T430's with a different DMI_PRODUCT_VERSION).
ThinkPad T430
Reported-and-tested-by: edm <fuffi.il.fuffo@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
Thinkpad T530
Reported-and-tested-by: Balint Szigeti <balint.szgt@gmail.com>
References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545
Acer Aspire 5742G
Reported-and-tested-by: AnAkkk <anakin.cs@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=35622
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lan Tianyu [Sun, 4 May 2014 03:07:25 +0000 (11:07 +0800)]
ACPI: Revert "ACPI / Battery: Remove battery's proc directory"
commit
3a670cc79342c36d308decd5f90351830ed1685c upstream.
The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery
directory and breaks some old userspace tools. This patch
is to revert commit 1e2d9cd.
Fixes:
1e2d9cdfb449 (ACPI / Battery: Remove battery's proc directory)
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lan Tianyu [Sun, 4 May 2014 03:07:24 +0000 (11:07 +0800)]
ACPI: Revert "ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c"
commit
e2a7c3d7812369daae56f069eab2e8f3e548d231 upstream.
The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery
directory and breaks some old userspace tools. This patch
is to revert 7d7ee95.
Fixes:
7d7ee958867a (ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c)
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lv Zheng [Tue, 13 May 2014 08:50:30 +0000 (16:50 +0800)]
ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses.
commit
85dbd5801f62b66e2aa7826aaefcaebead44c8a6 upstream.
We need to find a smarter way to switch to 64-bit FADT addresses according
to the bug report. This patch reverts Linux to the original behavior.
Fixes:
0249ed2444d6 (ACPICA: Add option to favor 32-bit FADT addresses.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Reported-and-tested-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lv Zheng [Wed, 30 Apr 2014 02:05:40 +0000 (10:05 +0800)]
ACPICA: Tables: Fix invalid pointer accesses in acpi_tb_parse_root_table().
commit
d48dc067450d84324067f4472dc0b169e9af4454 upstream.
Linux XSDT validation mechanism backport has introduced a regreession:
Commit:
671cc68dc61f029d44b43a681356078e02d8dab8
Subject: ACPICA: Back port and refine validation of the XSDT root table.
There is a pointer still accessed after unmapping.
This patch fixes this issue. Lv Zheng.
Fixes:
671cc68dc61f (ACPICA: Back port and refine validation of the XSDT root table.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73911
References: https://bugs.archlinux.org/task/39811
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Bruce Chiarelli <mano155@gmail.com>
Reported-and-tested-by: Spyros Stathopoulos <spystath@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Levente Kurusa [Tue, 6 May 2014 13:57:48 +0000 (15:57 +0200)]
libata: clean up ZPODD when a port is detached
commit
a6f9bf4d2f965b862b95213303d154e02957eed8 upstream.
When a ZPODD device is unbound via sysfs, the ACPI notify handler
is not removed. This causes panics as observed in Bug #74601. The
panic only happens when the wake happens from outside the kernel
(i.e. inserting a media or pressing a button). Add a loop to
ata_port_detach which loops through the port's devices and checks
if zpodd is enabled, if so call zpodd_exit.
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Levente Kurusa <levex@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Bellinger [Mon, 12 May 2014 19:18:32 +0000 (12:18 -0700)]
tcm_fc: Fix free-after-use regression in ft_free_cmd
commit
ed8ec8f707ed4760c124d47b27c93df8ec5b1eba upstream.
This patch fixes a free-after-use regression in ft_free_cmd(), where
ft_sess_put() is called with cmd->sess after percpu_ida_free() has
already released the tag.
Fix this bug by saving the ft_sess pointer ahead of percpu_ida_free(),
and pass it directly to ft_sess_put().
The regression was originally introduced in v3.13-rc1 commit:
commit
5f544cfac956971099e906f94568bc3fd1a7108a
Author: Nicholas Bellinger <nab@daterainc.com>
Date: Mon Sep 23 12:12:42 2013 -0700
tcm_fc: Convert to per-cpu command map pre-allocation of ft_cmd
Reported-by: Jun Wu <jwu@stormojo.com>
Cc: Mark Rustad <mark.d.rustad@intel.com>
Cc: Robert Love <robert.w.love@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Wed, 7 May 2014 07:56:24 +0000 (10:56 +0300)]
dmaengine: dw: went back to plain {request,free}_irq() calls
commit
97977f7576a89cb9436c000ae703c0d515e748ac upstream.
The commit
dbde5c29 "dw_dmac: use devm_* functions to simplify code" turns
probe function to use devm_* helpers and simultaneously brings a regression. We
need to ensure irq is disabled, followed by ensuring that don't schedule any
more tasklets and then its safe to use tasklet_kill().
The free_irq() will ensure that the irq is disabled and also wait till all
scheduled interrupts are executed by invoking synchronize_irq(). So we need to
only do tasklet_kill() after invoking free_irq().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ezequiel Garcia [Wed, 21 May 2014 21:02:35 +0000 (14:02 -0700)]
dma: mv_xor: Flush descriptors before activating a channel
commit
5a9a55bf9157d3490b0c8c4c81d4708602c26e07 upstream.
We need to use writel() instead of writel_relaxed() when starting
a channel, to ensure all the descriptors have been flushed before
the activation.
While at it, remove the unneeded read-modify-write and make the
code simpler.
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xuelin Shi [Wed, 21 May 2014 21:02:37 +0000 (14:02 -0700)]
dmaengine: fix dmaengine_unmap failure
commit
c1f43dd9c20d85e66c4d77e284f64ac114abe3f8 upstream.
The count which is used to get_unmap_data maybe not the same as the
count computed in dmaengine_unmap which causes to free data in a
wrong pool.
This patch fixes this issue by keeping the map count with unmap_data
structure and use this count to get the pool.
Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Thornber [Fri, 9 May 2014 14:59:38 +0000 (15:59 +0100)]
dm thin: add timeout to stop out-of-data-space mode holding IO forever
commit
85ad643b7e7e52d37620fb272a9fd577a8095647 upstream.
If the pool runs out of data space, dm-thin can be configured to
either error IOs that would trigger provisioning, or hold those IOs
until the pool is resized. Unfortunately, holding IOs until the pool is
resized can result in a cascade of tasks hitting the hung_task_timeout,
which may render the system unavailable.
Add a fixed timeout so IOs can only be held for a maximum of 60 seconds.
If LVM is going to resize a thin-pool that is out of data space it needs
to be prompt about it.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Thornber [Tue, 6 May 2014 15:28:14 +0000 (16:28 +0100)]
dm thin: allow metadata commit if pool is in PM_OUT_OF_DATA_SPACE mode
commit
8d07e8a5f5bc7b90f755d9b427ea930024f4c986 upstream.
Commit
3e1a0699 ("dm thin: fix out of data space handling") introduced
a regression in the metadata commit() method by returning an error if
the pool is in PM_OUT_OF_DATA_SPACE mode. This oversight caused a thin
device to return errors even if the default queue_if_no_space ENOSPC
handling mode is used.
Fix commit() to only fail if pool is in PM_READ_ONLY or PM_FAIL mode.
Reported-by: qindehua@163.com
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Thu, 20 Feb 2014 23:01:01 +0000 (18:01 -0500)]
dm crypt: fix cpu hotplug crash by removing per-cpu structure
commit
610f2de3559c383caf8fbbf91e9968102dff7ca0 upstream.
The DM crypt target used per-cpu structures to hold pointers to a
ablkcipher_request structure. The code assumed that the work item keeps
executing on a single CPU, so it didn't use synchronization when
accessing this structure.
If a CPU is disabled by writing 0 to /sys/devices/system/cpu/cpu*/online,
the work item could be moved to another CPU. This causes dm-crypt
crashes, like the following, because the code starts using an incorrect
ablkcipher_request:
smpboot: CPU 7 is now offline
BUG: unable to handle kernel NULL pointer dereference at
0000000000000130
IP: [<
ffffffffa1862b3d>] crypt_convert+0x12d/0x3c0 [dm_crypt]
...
Call Trace:
[<
ffffffffa1864415>] ? kcryptd_crypt+0x305/0x470 [dm_crypt]
[<
ffffffff81062060>] ? finish_task_switch+0x40/0xc0
[<
ffffffff81052a28>] ? process_one_work+0x168/0x470
[<
ffffffff8105366b>] ? worker_thread+0x10b/0x390
[<
ffffffff81053560>] ? manage_workers.isra.26+0x290/0x290
[<
ffffffff81058d9f>] ? kthread+0xaf/0xc0
[<
ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120
[<
ffffffff813464ac>] ? ret_from_fork+0x7c/0xb0
[<
ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120
Fix this bug by removing the per-cpu definition. The structure
ablkcipher_request is accessed via a pointer from convert_context.
Consequently, if the work item is rescheduled to a different CPU, the
thread still uses the same ablkcipher_request.
This change may undermine performance improvements intended by commit
c0297721 ("dm crypt: scale to multiple cpus") on select hardware. In
practice no performance difference was observed on recent hardware. But
regardless, correctness is more important than performance.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gavin Shan [Mon, 19 May 2014 03:06:46 +0000 (13:06 +1000)]
PCI: Wrong register used to check pending traffic
commit
d0b4cc4e32705ff00d90d32da7783c266c702c04 upstream.
The incorrect register offset is passed to pci_wait_for_pending(), which is
caused by commit
157e876ffe ("PCI: Add pci_wait_for_pending() (refactor
pci_wait_for_pending_transaction())").
Fixes:
157e876ffe ("PCI: Add pci_wait_for_pending() (refactor pci_wait_for_pending_transaction())
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex.williamson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emmanuel Grumbach [Sun, 13 Apr 2014 12:51:41 +0000 (15:51 +0300)]
iwlwifi: mvm: BT Coex - fix Look Up Table
commit
a6bc92803e7f765e02c923cf37c8e280e729642a upstream.
A few entries were wrong and this caused throughput issues.
Fixes:
dac94da8dba3 ("iwlwifi: mvm: new BT Coex API")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Wed, 21 May 2014 09:07:25 +0000 (11:07 +0200)]
drm/i915: quirk invert brightness for Acer Aspire 5336
This is commit
0f540c3a7cfb91c9d7a19eb0c95c24 upstream.
Since
commit
ee1452d7458451a7508e0663553ce88d63958157
Author: Jani Nikula <jani.nikula@intel.com>
Date: Fri Sep 20 15:05:30 2013 +0300
drm/i915: assume all GM45 Acer laptops use inverted backlight PWM
failed and was later reverted in
commit
be505f643925e257087247b996cd8ece787c12af
Author: Alexander van Heukelum <heukelum@fastmail.fm>
Date: Sat Dec 28 21:00:39 2013 +0100
Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM"
fix the individual broken machine instead.
Note to backporters:
http://patchwork.freedesktop.org/patch/17837/
is the patch you want for 3.13 and older.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54171
Reference: http://mid.gmane.org/DUB115-W7628C7C710EA51AA110CD4A5000@phx.gbl
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Patch mangling for 3.14 plus adding the link to the original
for 3.13.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 21 May 2014 09:07:24 +0000 (11:07 +0200)]
drm/i915: Fix unsafe loop iteration over vma whilst unbinding them
This is commit
df6f783a4ef6790780a67c491897ac upstream.
On non-LLC platforms, when changing the cache level of an object, we may
need to unbind it so that prefetching across page boundaries does not
cross into a different memory domain. This requires us to unbind
conflicting vma, but we did so iterating over the objects vma in an
unsafe manner (as the list was being modified as we iterated).
The regression was introduced in
commit
3089c6f239d7d2c4cb2dd5c353e8984cf79af1d7
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Wed Jul 31 17:00:03 2013 -0700
drm/i915: make caching operate on all address spaces
apparently as far back as v3.12-rc1, but it has only just begun to
trigger real world bug reports.
Reported-and-tested-by: Nikolay Martynov <mar.kolya@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76384
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Wed, 21 May 2014 09:07:23 +0000 (11:07 +0200)]
drm/i915: move power domain init earlier during system resume
This is commit
76c4b250080fff6e4befaa36199424 upstream.
During resume the intel hda audio driver depends on the i915 driver
reinitializing the audio power domain. Since the order of calling the
i915 resume handler wrt. that of the audio driver is not guaranteed,
move the power domain reinitialization step to the resume_early
handler. This is guaranteed to run before the resume handler of any
other driver.
The power domain initialization in turn requires us to enable the i915
pci device first, so move that part earlier too.
Accordingly disabling of the i915 pci device should happen after the
audio suspend handler ran. So move the disabling later from the i915
resume handler to the resume_late handler.
v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't
get reordered wrt. intel_power_domains_init_hw()
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
[danvet: Add cc: stable and loud comments that this is just a hack.]
[danvet: Fix "Should it be static?" sparse warning reported by Wu
Fengguang's kbuilder.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Wed, 21 May 2014 09:07:22 +0000 (11:07 +0200)]
drm/i915: Disable self-refresh for untiled fbs on i915gm
This is commit
2ab1bc9df01dbc19b55b2271100db7 upstream.
Apparently it doesn't work. X-tiled self-refresh works flawlessly
otoh. Apparently X still works correctly with linear framebuffers, so
might just be an issue with the initial modeset. It's unclear whether
this just borked wm setup from our side or a hw restriction, but just
disabling gets things going.
Note that this regression was only brought to light with
commit
3f2dc5ac05714711fc14f2bf0ee5e42d5c08c581
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri Jan 10 14:06:47 2014 +0200
drm/i915: Fix 915GM self-refresh enable/disable
before that self-refresh for i915GM didn't work at all.
Kudos to Ville for spotting a little bug in the original patch I've
attached to the bug.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76103
Tested-by: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: Krzysztof Mazur <krzysiek@podlesie.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: rebase on top of drm-next with primary plane support.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Sat, 17 May 2014 10:49:22 +0000 (06:49 -0400)]
target: fix memory leak on XCOPY
commit
1e1110c43b1cda9fe77fc4a04835e460550e6b3c upstream.
On each processed XCOPY command, two "kmalloc-512" memory objects are
leaked. These represent two allocations of struct xcopy_pt_cmd in
target_core_xcopy.c.
The reason for the memory leak is that the cmd_kref field is not
initialized (thus, it is zero because the allocations were done with
kzalloc). When we decrement zero kref in target_put_sess_cmd, the result
is not zero, thus target_release_cmd_kref is not called.
This patch fixes the bug by moving kref initialization from
target_get_sess_cmd to transport_init_se_cmd (this function is called from
target_core_xcopy.c, so it will correctly initialize cmd_kref). It can be
easily verified that all code that calls target_get_sess_cmd also calls
transport_init_se_cmd earlier, thus moving kref_init shouldn't introduce
any new problems.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Grover [Wed, 14 May 2014 22:48:06 +0000 (15:48 -0700)]
target: Don't allow setting WC emulation if device doesn't support
commit
07b8dae38b09bcfede7e726f172e39b5ce8390d9 upstream.
Just like for pSCSI, if the transport sets get_write_cache, then it is
not valid to enable write cache emulation for it. Return an error.
see https://bugzilla.redhat.com/show_bug.cgi?id=1082675
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Bellinger [Thu, 1 May 2014 20:44:56 +0000 (13:44 -0700)]
iscsi-target: Change BUG_ON to REJECT in iscsit_process_nop_out
commit
7cbfcc953789ff864c2bf8365a82a3fba4869649 upstream.
This patch changes an incorrect use of BUG_ON to instead generate a
REJECT + PROTOCOL_ERROR in iscsit_process_nop_out() code. This case
can occur with traditional TCP where a flood of zeros in the data
stream can reach this block for what is presumed to be a NOP-OUT with
a solicited reply, but without a valid iscsi_cmd pointer.
This incorrect BUG_ON was introduced during the v3.11-rc timeframe
with the following commit:
commit
778de368964c5b7e8100cde9f549992d521e9c89
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Fri Jun 14 16:07:47 2013 -0700
iscsi/isert-target: Refactor ISCSI_OP_NOOP RX handling
Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sagi Grimberg [Tue, 29 Apr 2014 10:13:45 +0000 (13:13 +0300)]
Target/iser: Fix iscsit_accept_np and rdma_cm racy flow
commit
531b7bf4bd795d9a09eac92504322a472c010bc8 upstream.
RDMA CM and iSCSI target flows are asynchronous and completely
uncorrelated. Relying on the fact that iscsi_accept_np will be called
after CM connection request event and will wait for it is a mistake.
When attempting to login to a few targets this flow is racy and
unpredictable, but for parallel login to dozens of targets will
race and hang every time.
The correct synchronizing mechanism in this case is pending on
a semaphore rather than a wait_for_event. We keep the pending
interruptible for iscsi_np cleanup stage.
(Squash patch to remove dead code into parent - nab)
Reported-by: Slava Shwartsman <valyushash@gmail.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sagi Grimberg [Tue, 29 Apr 2014 10:13:44 +0000 (13:13 +0300)]
Target/iser: Fix wrong connection requests list addition
commit
9fe63c88b1d59f1ce054d6948ccd3096496ecedb upstream.
Should be adding list_add_tail($new, $head) and not
the other way around.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Grover [Tue, 15 Apr 2014 21:13:12 +0000 (14:13 -0700)]
target: Allow non-supporting backends to set pi_prot_type to 0
commit
448ba904160f9d8f69217c28a1692cee5afbff88 upstream.
Userspace tools assume if a value is read from configfs, it is valid
and will not cause an error if the same value is written back. The only
valid value for pi_prot_type for backends not supporting DIF is 0, so allow
this particular value to be set without returning an error.
Reported-by: Krzysztof Chojnowski <frirajder@gmail.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcel Apfelbaum [Thu, 15 May 2014 18:42:49 +0000 (12:42 -0600)]
PCI: shpchp: Check bridge's secondary (not primary) bus speed
commit
93fa9d32670f5592c8e56abc9928fc194e1e72fc upstream.
When a new device is added below a hotplug bridge, the bridge's secondary
bus speed and the device's bus speed must match. The shpchp driver
previously checked the bridge's *primary* bus speed, not the secondary bus
speed.
This caused hot-add errors like:
shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch
Check the secondary bus speed instead.
[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251
Fixes:
3749c51ac6c1 ("PCI: Make current and maximum bus speeds part of the PCI core")
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo [Mon, 19 May 2014 19:52:10 +0000 (15:52 -0400)]
sysfs: make sure read buffer is zeroed
commit
f5c16f29bf5e57ba4051fc7785ba7f035f798c71 upstream.
13c589d5b0ac ("sysfs: use seq_file when reading regular files")
switched sysfs from custom read implementation to seq_file to enable
later transition to kernfs. After the change, the buffer passed to
->show() is acquired through seq_get_buf(); unfortunately, this
introduces a subtle behavior change. Before the commit, the buffer
passed to ->show() was always zero as it was allocated using
get_zeroed_page(). Because seq_file doesn't clear buffers on
allocation and neither does seq_get_buf(), after the commit, depending
on the behavior of ->show(), we may end up exposing uninitialized data
to userland thus possibly altering userland visible behavior and
leaking information.
Fix it by explicitly clearing the buffer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ron <ron@debian.org>
Fixes:
13c589d5b0ac ("sysfs: use seq_file when reading regular files")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 23 Apr 2014 12:49:17 +0000 (14:49 +0200)]
genirq: Provide irq_force_affinity fallback for non-SMP
commit
4c88d7f9b0d5fb0588c3386be62115cc2eaa8f9f upstream.
Patch
01f8fa4f01d "genirq: Allow forcing cpu affinity of interrupts" added
an irq_force_affinity() function, and
30ccf03b4a6 "clocksource: Exynos_mct:
Use irq_force_affinity() in cpu bringup" subsequently uses it. However, the
driver can be used with CONFIG_SMP disabled, but the function declaration
is only available for CONFIG_SMP, leading to this build error:
drivers/clocksource/exynos_mct.c:431:3: error: implicit declaration of function 'irq_force_affinity' [-Werror=implicit-function-declaration]
irq_force_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu));
This patch introduces a dummy helper function for the non-SMP case
that always returns success, to get rid of the build error.
Since the patches causing the problem are marked for stable backports,
this one should be as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Link: http://lkml.kernel.org/r/5619084.0zmrrIUZLV@wuerfel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Wed, 14 May 2014 23:33:54 +0000 (16:33 -0700)]
x86-64, modify_ldt: Make support for 16-bit segments a runtime option
commit
fa81511bb0bbb2b1aace3695ce869da9762624ff upstream.
Checkin:
b3b42ac2cbae x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels
disabled 16-bit segments on 64-bit kernels due to an information
leak. However, it does seem that people are genuinely using Wine to
run old 16-bit Windows programs on Linux.
A proper fix for this ("espfix64") is coming in the upcoming merge
window, but as a temporary fix, create a sysctl to allow the
administrator to re-enable support for 16-bit segments.
It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If
you hit this issue and care about your old Windows program more than
you care about a kernel stack address information leak, you can do
echo 1 > /proc/sys/abi/ldt16
as root (add it to your startup scripts), and you should be ok.
The sysctl table is only added if you have COMPAT support enabled on
x86-64, but I assume anybody who runs old windows binaries very much
does that ;)
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Hogan [Tue, 13 May 2014 22:58:24 +0000 (23:58 +0100)]
metag: Reduce maximum stack size to 256MB
commit
d71f290b4e98a39f49f2595a13be3b4d5ce8e1f1 upstream.
Specify the maximum stack size for arches where the stack grows upward
(parisc and metag) in asm/processor.h rather than hard coding in
fs/exec.c so that metag can specify a smaller value of 256MB rather than
1GB.
This fixes a BUG on metag if the RLIMIT_STACK hard limit is increased
beyond a safe value by root. E.g. when starting a process after running
"ulimit -H -s unlimited" it will then attempt to use a stack size of the
maximum 1GB which is far too big for metag's limited user virtual
address space (stack_top is usually 0x3ffff000):
BUG: failure at fs/exec.c:589/shift_arg_pages()!
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: linux-parisc@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Thu, 8 May 2014 19:51:37 +0000 (15:51 -0400)]
metag: fix memory barriers
commit
2425ce84026c385b73ae72039f90d042d49e0394 upstream.
Volatile access doesn't really imply the compiler barrier. Volatile access
is only ordered with respect to other volatile accesses, it isn't ordered
with respect to general memory accesses. Gcc may reorder memory accesses
around volatile access, as we can see in this simple example (if we
compile it with optimization, both increments of *b will be collapsed to
just one):
void fn(volatile int *a, long *b)
{
(*b)++;
*a = 10;
(*b)++;
}
Consequently, we need the compiler barrier after a write to the volatile
variable, to make sure that the compiler doesn't reorder the volatile
write with something else.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John David Anglin [Sun, 11 May 2014 22:40:50 +0000 (18:40 -0400)]
parisc: Improve LWS-CAS performance
commit
c776cd89fc705fc8b5c2e5ad906bf5d791620fed upstream.
The attached change significantly improves the performance of the LWS-CAS code
in syscall.S.
This allows a number of packages to build (e.g., zeromq3, gtest and libxs)
that previously failed because slow LWS-CAS performance under contention. In
particular, interrupts taken while the lock was taken degraded performance
significantly.
The change does the following:
1) Disables interrupts around the CAS operation, and
2) Changes the loads and stores to use the ordered completer, "o", on
PA 2.0. "o" and "ma" with a zero offset are equivalent. The latter is
accepted on both PA 1.X and 2.0.
The use of ordered loads and stores probably makes no difference on all
existing hardware, but it seemed pedantically correct. In particular, the CAS
operation must complete before LDCW lock is released. As written before, a
processor could reorder the operations.
I don't believe the period interrupts are disabled is long enough to
significantly increase interrupt latency. For example, the TLB insert code is
longer. Worst case is a memory fault in the CAS operation.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Mon, 5 May 2014 16:07:12 +0000 (18:07 +0200)]
parisc: ratelimit userspace segfault printing
commit
fef47e2a2e1e75fe50a10f634a80f16808348cc6 upstream.
Ratelimit printing of userspace segfaults and make it runtime
configurable via the /proc/sys/debug/exception-trace variable. This
should resolve syslog from growing way too fast and thus prevents
possible system service attacks.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Charles Keepax [Tue, 13 May 2014 12:45:15 +0000 (13:45 +0100)]
ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatile
commit
44330ab516c15dda8a1e660eeaf0003f84e43e3f upstream.
The register CLASS_D_CONTROL_1 is marked as volatile because it contains
a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1
register. This causes problems for the "Speaker Switch" control, which
will report an error if the CODEC is suspended because it relies on a
volatile register.
To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and
manually keep the register cache in sync by updating both bits when
changing the mute status.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Wed, 7 May 2014 14:20:24 +0000 (16:20 +0200)]
ASoC: dapm: Skip CODEC<->CODEC links in connect_dai_link_widgets()
commit
ca5106ae3da0179dcee3ae21f3ea94f62e9fdb0c upstream.
For CODEC to CODEC DAI links the paths are created in snd_soc_dapm_new_pcm().
Also for CODEC to CODEC links the widgets are connected cross-over via a DAI
link widget, meaning that the capture widget of one CODEC will be connected to
the playback widget of the other and vice versa. Whereas
snd_soc_dapm_connect_dai_link_widgets() directly connects the playback widget of
the CPU DAI to the playback widget of the CODEC DAI and the capture widget of
the CPU DAI to the capture widget of the CODEC DAI. So not skipping
CODEC<->CODEC links in snd_soc_dapm_connect_dai_link_widgets() will create
incorrect connections between the two CODECs which will cause DAPM to detect
active paths where there are none and unnecessarily power up widgets.
Fixes: b893ea5 ("ASoC: sapm: Automatically connect DAI link widgets in DAPM graph.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emmanuel Grumbach [Thu, 8 May 2014 06:48:10 +0000 (09:48 +0300)]
iwlwifi: mvm: fix setting channel in monitor mode
commit
1c4abec0baf25ffb92a28cc99d4231feeaa4d3f3 upstream.
There was a deadlock in monitor mode when we were setting the
channel if the channel was not 1.
======================================================
[ INFO: possible circular locking dependency detected ]
3.14.3 #4 Not tainted
-------------------------------------------------------
iw/3323 is trying to acquire lock:
(&local->chanctx_mtx){+.+.+.}, at: [<
ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211]
but task is already holding lock:
(&local->iflist_mtx){+.+...}, at: [<
ffffffffa0609e0a>] ieee80211_set_monitor_channel+0x5a/0x1b0 [mac80211]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&local->iflist_mtx){+.+...}:
[<
ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0
[<
ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0
[<
ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0
[<
ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211]
[<
ffffffffa0518189>] iwl_mvm_recalc_multicast+0x49/0xa0 [iwlmvm]
[<
ffffffffa051822e>] iwl_mvm_configure_filter+0x4e/0x70 [iwlmvm]
[<
ffffffffa05e6d43>] ieee80211_configure_filter+0x153/0x5f0 [mac80211]
[<
ffffffffa05e71f5>] ieee80211_reconfig_filter+0x15/0x20 [mac80211]
[snip]
-> #1 (&mvm->mutex){+.+.+.}:
[<
ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0
[<
ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0
[<
ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0
[<
ffffffffa0517246>] iwl_mvm_add_chanctx+0x56/0xe0 [iwlmvm]
[<
ffffffffa062ca1e>] ieee80211_new_chanctx+0x13e/0x410 [mac80211]
[<
ffffffffa062d953>] ieee80211_vif_use_channel+0x1c3/0x5a0 [mac80211]
[<
ffffffffa06035ab>] ieee80211_add_virtual_monitor+0x1ab/0x6b0 [mac80211]
[<
ffffffffa06052ea>] ieee80211_do_open+0xe6a/0x15a0 [mac80211]
[<
ffffffffa0605a79>] ieee80211_open+0x59/0x60 [mac80211]
[snip]
-> #0 (&local->chanctx_mtx){+.+.+.}:
[<
ffffffff810d6cb7>] check_prevs_add+0x977/0x980
[<
ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0
[<
ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0
[<
ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0
[<
ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211]
[<
ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211]
[<
ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211]
[<
ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211]
[<
ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211]
[snip]
other info that might help us debug this:
Chain exists of:
&local->chanctx_mtx --> &mvm->mutex --> &local->iflist_mtx
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&local->iflist_mtx);
lock(&mvm->mutex);
lock(&local->iflist_mtx);
lock(&local->chanctx_mtx);
*** DEADLOCK ***
This deadlock actually occurs:
INFO: task iw:3323 blocked for more than 120 seconds.
Not tainted 3.14.3 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
iw D
ffff8800c8afcd80 4192 3323 3322 0x00000000
ffff880078fdb7e0 0000000000000046 ffff8800c8afcd80 ffff880078fdbfd8
00000000001d5540 00000000001d5540 ffff8801141b0000 ffff8800c8afcd80
ffff880078ff9e38 ffff880078ff9e38 ffff880078ff9e40 0000000000000246
Call Trace:
[<
ffffffff817ea841>] schedule_preempt_disabled+0x31/0x80
[<
ffffffff817ebaed>] mutex_lock_nested+0x19d/0x4f0
[<
ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211]
[<
ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211]
[<
ffffffffa052a680>] ? iwl_mvm_power_mac_update_mode+0xc0/0xc0 [iwlmvm]
[<
ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211]
[<
ffffffffa0529357>] _iwl_mvm_power_update_binding+0x27/0x80 [iwlmvm]
[<
ffffffffa0516eb1>] iwl_mvm_unassign_vif_chanctx+0x81/0xc0 [iwlmvm]
[<
ffffffffa062d3ff>] __ieee80211_vif_release_channel+0xdf/0x470 [mac80211]
[<
ffffffffa062e2fa>] ieee80211_vif_release_channel+0x4a/0xb0 [mac80211]
[<
ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211]
[<
ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211]
[<
ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211]
[<
ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211]
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=75541
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emmanuel Grumbach [Sun, 13 Apr 2014 13:03:11 +0000 (16:03 +0300)]
iwlwifi: pcie: disable interrupts upon PCIe alloc
commit
83f7a85f1134c6e914453f5747435415a23d516b upstream.
In case RFKILL is in KILL position, the NIC will issue an
interrupt straight away. This interrupt won't be sent
because it is masked in the hardware.
But if our interrupt service routine is called for another
reason (SHARED_IRQ), then we'll look at the interrupt cause
and service it. This can cause bad things if we are not
ready yet.
Explicitly clean the interrupt cause register to make sure
we won't service anything before we are ready to.
Reported-and-tested-by: Alexander Monakov <amonakov@gmail.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jianyu Zhan [Mon, 14 Apr 2014 05:47:40 +0000 (13:47 +0800)]
percpu: make pcpu_alloc_chunk() use pcpu_mem_free() instead of kfree()
commit
5a838c3b60e3a36ade764cf7751b8f17d7c9c2da upstream.
pcpu_chunk_struct_size = sizeof(struct pcpu_chunk) +
BITS_TO_LONGS(pcpu_unit_pages) * sizeof(unsigned long)
It hardly could be ever bigger than PAGE_SIZE even for large-scale machine,
but for consistency with its couterpart pcpu_mem_zalloc(),
use pcpu_mem_free() instead.
Commit
b4916cb17c26 ("percpu: make pcpu_free_chunk() use
pcpu_mem_free() instead of kfree()") addressed this problem, but
missed this one.
tj: commit message updated
Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes:
099a19d91ca4 ("percpu: allow limited allocation before slab is online)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Petazzoni [Mon, 12 May 2014 14:11:40 +0000 (16:11 +0200)]
ARM: mvebu: mvebu-soc-id: keep clock enabled if PCIe unit is enabled
commit
b25bcf1bcaf6687991ae08dd76cd784bf9fe3d05 upstream.
Since the mvebu-soc-id code in mach-mvebu/ was introduced, several
users have noticed a regression: the PCIe card connected in the first
PCIe interface is not detected properly.
This is due to the fact that the mvebu-soc-id code enables the PCIe
clock of the first PCIe interface, reads the SoC device ID and
revision number (yes this information is made available as part of
PCIe registers), and then disables the clock. However, by doing this,
we gate the clock and therefore loose the complex PCIe configuration
that was done by the bootloader.
Unfortunately, as of today, the kernel is not capable of doing this
complex configuration by itself, so we really need to keep the PCIe
clock enabled. However, we don't want to keep it enabled
unconditionally: if the PCIe interface is not enabled or PCI support
is not compiled into the kernel, there is no reason to keep the PCIe
clock running.
This issue was discussed with Kevin Hilman, and the suggested solution
was to make the mvebu-soc-id code keep the clock enabled in case it
will be needed for PCIe. This is therefore the solution implemented in
this patch.
Long term, we hope to make the kernel more capable in terms of PCIe
configuration for this platform, which will anyway be needed to
support the compilation of the PCIe host controller driver as a
module. In the mean time however, we don't have much other choice than
to implement the currently proposed solution.
Reported-by: Neil Greatorex <neil@fatboyfat.co.uk>
Cc: Neil Greatorex <neil@fatboyfat.co.uk>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1399903900-29977-3-git-send-email-thomas.petazzoni@free-electrons.com
Fixes:
af8d1c63afcb ("ARM: mvebu: Add support to get the ID and the revision of a SoC")
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Petazzoni [Mon, 12 May 2014 14:11:39 +0000 (16:11 +0200)]
ARM: mvebu: mvebu-soc-id: add missing clk_put() call
commit
42a18d1cf484d02e23afadfa5dc09356e6bef9fa upstream.
The mvebu-soc-id code in mach-mvebu/ needs to enable a clock to read
the SoC device ID and revision number. To do so, it does a clk_get(),
then a clk_prepare_enable(), reads the value, and disables the clock
with clk_disable_unprepare(). However, it forgets to clk_put() the
clock. This commit fixes this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1399903900-29977-2-git-send-email-thomas.petazzoni@free-electrons.com
Fixes:
af8d1c63afcb ("ARM: mvebu: Add support to get the ID and the revision of a SoC")
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Petazzoni [Fri, 18 Apr 2014 12:19:53 +0000 (14:19 +0200)]
PCI: mvebu: split PCIe BARs into multiple MBus windows when needed
commit
398f5d5e10b6b917cd9d35ef21d545b0afbada22 upstream.
MBus windows are used on Marvell platforms to map certain peripherals
in the physical address space. In the PCIe context, MBus windows are
needed to map PCIe I/O and memory regions in the physical address.
However, those MBus windows can only have power of two sizes, while
PCIe BAR do not necessarily guarantee this. For this reason, the
current pci-mvebu breaks on platforms where PCIe devices have BARs
that don't sum up to a power of two size at the emulated bridge level.
This commit fixes this by allowing the pci-mvebu driver to create
multiple contiguous MBus windows (each having a power of two size) to
cover a given PCIe BAR.
To achieve this, two functions are added: mvebu_pcie_add_windows() and
mvebu_pcie_del_windows() to respectively add and remove all the MBus
windows that are needed to map the provided PCIe region base and
size. The emulated PCI bridge code now calls those functions, instead
of directly calling the mvebu-mbus driver functions.
Fixes:
45361a4fe446 ('pci: PCIe driver for Marvell Armada 370/XP systems')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397823593-1932-8-git-send-email-thomas.petazzoni@free-electrons.com
Tested-by: Neil Greatorex <neil@fatboyfat.co.uk>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Petazzoni [Fri, 18 Apr 2014 12:19:52 +0000 (14:19 +0200)]
bus: mvebu-mbus: allow several windows with the same target/attribute
commit
b566e782be32145664d96ada3e389f17d32742e5 upstream.
Having multiple windows with the same target and attribute is actually
legal, and can be useful for PCIe windows, when PCIe BARs have a size
that isn't a power of two, and we therefore need to create several
MBus windows to cover the PCIe BAR for a given PCIe interface.
Fixes:
fddddb52a6c4 ('bus: introduce an Marvell EBU MBus driver')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397823593-1932-7-git-send-email-thomas.petazzoni@free-electrons.com
Tested-by: Neil Greatorex <neil@fatboyfat.co.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willy Tarreau [Fri, 18 Apr 2014 12:19:50 +0000 (14:19 +0200)]
PCI: mvebu: fix off-by-one in the computed size of the mbus windows
commit
b6d07e0273d3296cfbdc88145b8a00ddbefb310a upstream.
mvebu_pcie_handle_membase_change() and
mvebu_pcie_handle_iobase_change() do not correctly compute the window
size. PCI uses an inclusive start/end address pair, which requires a
+1 when converting to size.
This only worked because a bug in the mbus driver allowed it to
silently accept and round up bogus sizes.
Fix this by adding one to the computed size.
Fixes:
45361a4fe446 ('PCIe driver for Marvell Armada 370/XP systems')
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397823593-1932-5-git-send-email-thomas.petazzoni@free-electrons.com
Tested-by: Neil Greatorex <neil@fatboyfat.co.uk>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Petazzoni [Mon, 14 Apr 2014 15:29:18 +0000 (17:29 +0200)]
memory: mvebu-devbus: fix the conversion of the bus width
commit
ce965c3d2e68c5325dd5624eb101d70423022fef upstream.
According to the Armada 370 and Armada XP datasheets, the part of the
Device Bus register that configure the bus width should contain 0 for
a 8 bits bus width, and 1 for a 16 bits bus width (other values are
unsupported/reserved).
However, the current conversion done in the driver to convert from a
bus width in bits to the value expected by the register leads to
setting the register to 1 for a 8 bits bus, and 2 for a 16 bits bus.
This mistake was compensated by a mistake in the existing Device Tree
files for Armada 370/XP platforms: they were declaring a 8 bits bus
width, while the hardware in fact uses a 16 bits bus width.
This commit fixes that by adjusting the conversion logic.
This patch fixes a bug that was introduced in
3edad321b1bd2e6c8b5f38146c115c8982438f06 ('drivers: memory: Introduce
Marvell EBU Device Bus driver'), which was merged in v3.11.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397489361-5833-2-git-send-email-thomas.petazzoni@free-electrons.com
Fixes:
3edad321b1bd ('drivers: memory: Introduce Marvell EBU Device Bus driver')
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Jiangshan [Fri, 18 Apr 2014 15:04:16 +0000 (11:04 -0400)]
workqueue: make rescuer_thread() empty wq->maydays list before exiting
commit
4d595b866d2c653dc90a492b9973a834eabfa354 upstream.
After a @pwq is scheduled for emergency execution, other workers may
consume the affectd work items before the rescuer gets to them. This
means that a workqueue many have pwqs queued on @wq->maydays list
while not having any work item pending or in-flight. If
destroy_workqueue() executes in such condition, the rescuer may exit
without emptying @wq->maydays.
This currently doesn't cause any actual harm. destroy_workqueue() can
safely destroy all the involved data structures whether @wq->maydays
is populated or not as nobody access the list once the rescuer exits.
However, this is nasty and makes future development difficult. Let's
update rescuer_thread() so that it empties @wq->maydays after seeing
should_stop to guarantee that the list is empty on rescuer exit.
tj: Updated comment and patch description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Jiangshan [Fri, 18 Apr 2014 15:04:16 +0000 (11:04 -0400)]
workqueue: fix a possible race condition between rescuer and pwq-release
commit
77668c8b559e4fe2acf2a0749c7c83cde49a5025 upstream.
There is a race condition between rescuer_thread() and
pwq_unbound_release_workfn().
Even after a pwq is scheduled for rescue, the associated work items
may be consumed by any worker. If all of them are consumed before the
rescuer gets to them and the pwq's base ref was put due to attribute
change, the pwq may be released while still being linked on
@wq->maydays list making the rescuer dereference already freed pwq
later.
Make send_mayday() pin the target pwq until the rescuer is done with
it.
tj: Updated comment and patch description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Wed, 16 Apr 2014 05:32:29 +0000 (14:32 +0900)]
workqueue: fix bugs in wq_update_unbound_numa() failure path
commit
77f300b198f93328c26191b52655ce1b62e202cf upstream.
wq_update_unbound_numa() failure path has the following two bugs.
- alloc_unbound_pwq() is called without holding wq->mutex; however, if
the allocation fails, it jumps to out_unlock which tries to unlock
wq->mutex.
- The function should switch to dfl_pwq on failure but didn't do so
after alloc_unbound_pwq() failure.
Fix it by regrabbing wq->mutex and jumping to use_dfl_pwq on
alloc_unbound_pwq() failure.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes:
4c16bd327c74 ("workqueue: implement NUMA affinity for unbound workqueues")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Tue, 20 May 2014 19:55:21 +0000 (15:55 -0400)]
nfsd4: remove lockowner when removing lock stateid
commit
a1b8ff4c97b4375d21b6d6c45d75877303f61b3b upstream.
The nfsv4 state code has always assumed a one-to-one correspondance
between lock stateid's and lockowners even if it appears not to in some
places.
We may actually change that, but for now when FREE_STATEID releases a
lock stateid it also needs to release the parent lockowner.
Symptoms were a subsequent LOCK crashing in find_lockowner_str when it
calls same_lockowner_ino on a lockowner that unexpectedly has an empty
so_stateids list.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Thu, 8 May 2014 15:19:41 +0000 (11:19 -0400)]
nfsd4: warn on finding lockowner without stateid's
commit
27b11428b7de097c42f205beabb1764f4365443b upstream.
The current code assumes a one-to-one lockowner<->lock stateid
correspondance.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kinglong Mee [Fri, 18 Apr 2014 12:49:04 +0000 (20:49 +0800)]
NFSD: Call ->set_acl with a NULL ACL structure if no entries
commit
aa07c713ecfc0522916f3cd57ac628ea6127c0ec upstream.
After setting ACL for directory, I got two problems that caused
by the cached zero-length default posix acl.
This patch make sure nfsd4_set_nfs4_acl calls ->set_acl
with a NULL ACL structure if there are no entries.
Thanks for Christoph Hellwig's advice.
First problem:
............ hang ...........
Second problem:
[ 1610.167668] ------------[ cut here ]------------
[ 1610.168320] kernel BUG at /root/nfs/linux/fs/nfsd/nfs4acl.c:239!
[ 1610.168320] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 1610.168320] Modules linked in: nfsv4(OE) nfs(OE) nfsd(OE)
rpcsec_gss_krb5 fscache ip6t_rpfilter ip6t_REJECT cfg80211 xt_conntrack
rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables
ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
ip6table_mangle ip6table_security ip6table_raw ip6table_filter
ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4
nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw
auth_rpcgss nfs_acl snd_intel8x0 ppdev lockd snd_ac97_codec ac97_bus
snd_pcm snd_timer e1000 pcspkr parport_pc snd parport serio_raw joydev
i2c_piix4 sunrpc(OE) microcode soundcore i2c_core ata_generic pata_acpi
[last unloaded: nfsd]
[ 1610.168320] CPU: 0 PID: 27397 Comm: nfsd Tainted: G OE
3.15.0-rc1+ #15
[ 1610.168320] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 1610.168320] task:
ffff88005ab653d0 ti:
ffff88005a944000 task.ti:
ffff88005a944000
[ 1610.168320] RIP: 0010:[<
ffffffffa034d5ed>] [<
ffffffffa034d5ed>]
_posix_to_nfsv4_one+0x3cd/0x3d0 [nfsd]
[ 1610.168320] RSP: 0018:
ffff88005a945b00 EFLAGS:
00010293
[ 1610.168320] RAX:
0000000000000001 RBX:
ffff88006700bac0 RCX:
0000000000000000
[ 1610.168320] RDX:
0000000000000000 RSI:
ffff880067c83f00 RDI:
ffff880068233300
[ 1610.168320] RBP:
ffff88005a945b48 R08:
ffffffff81c64830 R09:
0000000000000000
[ 1610.168320] R10:
ffff88004ea85be0 R11:
000000000000f475 R12:
ffff880068233300
[ 1610.168320] R13:
0000000000000003 R14:
0000000000000002 R15:
ffff880068233300
[ 1610.168320] FS:
0000000000000000(0000) GS:
ffff880077800000(0000)
knlGS:
0000000000000000
[ 1610.168320] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[ 1610.168320] CR2:
00007f5bcbd3b0b9 CR3:
0000000001c0f000 CR4:
00000000000006f0
[ 1610.168320] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 1610.168320] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 1610.168320] Stack:
[ 1610.168320]
ffffffff00000000 0000000b67c83500 000000076700bac0
0000000000000000
[ 1610.168320]
ffff88006700bac0 ffff880068233300 ffff88005a945c08
0000000000000002
[ 1610.168320]
0000000000000000 ffff88005a945b88 ffffffffa034e2d5
000000065a945b68
[ 1610.168320] Call Trace:
[ 1610.168320] [<
ffffffffa034e2d5>] nfsd4_get_nfs4_acl+0x95/0x150 [nfsd]
[ 1610.168320] [<
ffffffffa03400d6>] nfsd4_encode_fattr+0x646/0x1e70 [nfsd]
[ 1610.168320] [<
ffffffff816a6e6e>] ? kmemleak_alloc+0x4e/0xb0
[ 1610.168320] [<
ffffffffa0327962>] ?
nfsd_setuser_and_check_port+0x52/0x80 [nfsd]
[ 1610.168320] [<
ffffffff812cd4bb>] ? selinux_cred_prepare+0x1b/0x30
[ 1610.168320] [<
ffffffffa0341caa>] nfsd4_encode_getattr+0x5a/0x60 [nfsd]
[ 1610.168320] [<
ffffffffa0341e07>] nfsd4_encode_operation+0x67/0x110
[nfsd]
[ 1610.168320] [<
ffffffffa033844d>] nfsd4_proc_compound+0x21d/0x810 [nfsd]
[ 1610.168320] [<
ffffffffa0324d9b>] nfsd_dispatch+0xbb/0x200 [nfsd]
[ 1610.168320] [<
ffffffffa00850cd>] svc_process_common+0x46d/0x6d0 [sunrpc]
[ 1610.168320] [<
ffffffffa0085433>] svc_process+0x103/0x170 [sunrpc]
[ 1610.168320] [<
ffffffffa032472f>] nfsd+0xbf/0x130 [nfsd]
[ 1610.168320] [<
ffffffffa0324670>] ? nfsd_destroy+0x80/0x80 [nfsd]
[ 1610.168320] [<
ffffffff810a5202>] kthread+0xd2/0xf0
[ 1610.168320] [<
ffffffff810a5130>] ? insert_kthread_work+0x40/0x40
[ 1610.168320] [<
ffffffff816c1ebc>] ret_from_fork+0x7c/0xb0
[ 1610.168320] [<
ffffffff810a5130>] ? insert_kthread_work+0x40/0x40
[ 1610.168320] Code: 78 02 e9 e7 fc ff ff 31 c0 31 d2 31 c9 66 89 45 ce
41 8b 04 24 66 89 55 d0 66 89 4d d2 48 8d 04 80 49 8d 5c 84 04 e9 37 fd
ff ff <0f> 0b 90 0f 1f 44 00 00 55 8b 56 08 c7 07 00 00 00 00 8b 46 0c
[ 1610.168320] RIP [<
ffffffffa034d5ed>] _posix_to_nfsv4_one+0x3cd/0x3d0
[nfsd]
[ 1610.168320] RSP <
ffff88005a945b00>
[ 1610.257313] ---[ end trace
838254e3e352285b ]---
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Fri, 18 Apr 2014 18:43:57 +0000 (14:43 -0400)]
NFSd: call rpc_destroy_wait_queue() from free_client()
commit
4cb57e3032d4e4bf5e97780e9907da7282b02b0c upstream.
Mainly to ensure that we don't leave any hanging timers.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Fri, 18 Apr 2014 18:43:56 +0000 (14:43 -0400)]
NFSd: Move default initialisers from create_client() to alloc_client()
commit
5694c93e6c4954fa9424c215f75eeb919bddad64 upstream.
Aside from making it clearer what is non-trivial in create_client(), it
also fixes a bug whereby we can call free_client() before idr_init()
has been called.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 23 May 2014 07:02:44 +0000 (09:02 +0200)]
ALSA: hda - Fix onboard audio on Intel H97/Z97 chipsets
commit
77f07800cb456bed6e5c345e6e4e83e8eda62437 upstream.
The recent Intel H97/Z97 chipsets need the similar setups like other
Intel chipsets for snooping, etc. Especially without snooping, the
audio playback stutters or gets corrupted. This fix patch just adds
the corresponding PCI ID entry with the proper flags.
Reported-and-tested-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Sun, 4 May 2014 23:38:43 +0000 (02:38 +0300)]
ALSA: hda - hdmi: Set converter channel count even without sink
commit
f06ab794af7055d0949b09885f79f8b493deec64 upstream.
Since commit
1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel
count") channel count is no longer being set if monitor_present is 0.
This is because setting the count was moved after the CA value is
determined, which is only after the monitor_present check in
hdmi_setup_audio_infoframe().
Unfortunately, in some cases, such as with a non-spec-compliant codec or
with a problematic video driver, monitor_present is always 0. As a
specific example, this seems to happen with gen1 ATV (SiI1390 codec),
causing left-channel-only stereo playback (multi-channel playback has
apparently never worked with this codec despite it reporting 8 channels,
reason unknown).
Simply setting converter channel count without setting the pin infoframe
and channel mapping as well does not theoretically make much sense as
this will just mean they are out-of-sync and multichannel playback will
have a wrong channel mapping.
However, adding back just setting the converter channel count even in
no-monitor case is the safest change which at least fixes the stereo
playback regression on SiI1390 codec. Do that.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reported-by: Stephan Raue <stephan@openelec.tv>
Tested-by: Stephan Raue <stephan@openelec.tv>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 20 May 2014 05:54:09 +0000 (22:54 -0700)]
Input: synaptics - change min/max quirk table to pnp-id matching
commit
0f68f39c393bc06ac5ccc8794f0e2ed841e41c3e upstream.
Most of the affected models share pnp-ids for the touchpad. So switching
to pnp-ids give us 2 advantages:
1) It shrinks the quirk list
2) It will lower the new quirk addition frequency, ie the recently added W540
quirk would not have been necessary since it uses the same LEN0034 pnp ids
as other models already added before it
As an added bonus it actually puts the quirk on the actual psmouse, rather
then on the machine, which is technically more correct.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 20 May 2014 05:53:23 +0000 (22:53 -0700)]
Input: synaptics - add a matches_pnp_id helper function
commit
e2f611029b370bb7a04236215ad4b36aa8cb98cd upstream.
This is a preparation patch for simplifying the min/max quirk table.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 20 May 2014 05:52:30 +0000 (22:52 -0700)]
Input: synaptics - T540p - unify with other LEN0034 models
commit
6d396ede224dc596d92d7cab433713536e68916c upstream.
The T540p has a touchpad with pnp-id LEN0034, all the models with this
pnp-id have the same min/max values, except the T540p where the values are
slightly off. Fix them to be identical.
This is a preparation patch for simplifying the quirk table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Wed, 14 May 2014 18:10:40 +0000 (11:10 -0700)]
Input: synaptics - add min/max quirk for the ThinkPad W540
commit
0b5fe736fe923f1f5e05413878d5990e92ffbdf5 upstream.
https://bugzilla.redhat.com/show_bug.cgi?id=1096436
Tested-and-reported-by: ajayr@bigfoot.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 5 May 2014 16:36:43 +0000 (09:36 -0700)]
Input: elantech - fix touchpad initialization on Gigabyte U2442
commit
36189cc3cd57ab0f1cd75241f93fe01de928ac06 upstream.
The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept
0x0b as initialization value for r10, this stand-alone version of the
driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2
Uses 0x03 which does work, so this means not setting bit 3 of r10 which
sets: "Enable Real H/W Resolution In Absolute mode"
Which will result in half the x and y resolution we get with that bit set,
so simply not setting it everywhere is not a solution. We've been unable to
find a way to identify touchpads where setting the bit will fail, so this
patch uses a dmi based blacklist for this.
https://bugzilla.kernel.org/show_bug.cgi?id=61151
Reported-by: Philipp Wolfer <ph.wolfer@gmail.com>
Tested-by: Philipp Wolfer <ph.wolfer@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sheng-Liang Song [Thu, 24 Apr 2014 23:28:29 +0000 (16:28 -0700)]
Input: atkbd - fix keyboard not working on some LG laptops
commit
3d725caa9dcc78c3dc9e7ea0c04f626468edd9c9 upstream.
After issuing ATKBD_CMD_RESET_DIS, keyboard on some LG laptops stops
working. The workaround is to stop issuing ATKBD_CMD_RESET_DIS commands.
In order to keep changes in atkbd driver to the minimum we check DMI
signature and only skip ATKBD_CMD_RESET_DIS if we are running on LG
LW25-B7HV or P1-J273B.
Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Romain Izard [Tue, 4 Mar 2014 09:09:39 +0000 (10:09 +0100)]
trace: module: Maintain a valid user count
commit
098507ae3ec2331476fb52e85d4040c1cc6d0ef4 upstream.
The replacement of the 'count' variable by two variables 'incs' and
'decs' to resolve some race conditions during module unloading was done
in parallel with some cleanup in the trace subsystem, and was integrated
as a merge.
Unfortunately, the formula for this replacement was wrong in the tracing
code, and the refcount in the traces was not usable as a result.
Use 'count = incs - decs' to compute the user count.
Link: http://lkml.kernel.org/p/1393924179-9147-1-git-send-email-romain.izard.pro@gmail.com
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes:
c1ab9cab7509 "merge conflict resolution"
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 19 Apr 2014 16:30:58 +0000 (12:30 -0400)]
fix races between __d_instantiate() and checks of dentry flags
commit
22213318af7ae265bc6cd8aef2febbc2d69a2440 upstream.
in non-lazy walk we need to be careful about dentry switching from
negative to positive - both ->d_flags and ->d_inode are updated,
and in some places we might see only one store. The cases where
dentry has been obtained by dcache lookup with ->i_mutex held on
parent are safe - ->d_lock and ->i_mutex provide all the barriers
we need. However, there are several places where we run into
trouble:
* do_last() fetches ->d_inode, then checks ->d_flags and
assumes that inode won't be NULL unless d_is_negative() is true.
Race with e.g. creat() - we might have fetched the old value of
->d_inode (still NULL) and new value of ->d_flags (already not
DCACHE_MISS_TYPE). Lin Ming has observed and reported the resulting
oops.
* a bunch of places checks ->d_inode for being non-NULL,
then checks ->d_flags for "is it a symlink". Race with symlink(2)
in case if our CPU sees ->d_inode update first - we see non-NULL
there, but ->d_flags still contains DCACHE_MISS_TYPE instead of
DCACHE_SYMLINK_TYPE. Result: false negative on "should we follow
link here?", with subsequent unpleasantness.
Reported-and-tested-by: Lin Ming <minggr@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Kent [Tue, 6 May 2014 19:50:06 +0000 (12:50 -0700)]
autofs: fix lockref lookup
commit
6b6751f7feba68d8f5c72b72cc69a1c5a625529c upstream.
autofs needs to be able to see private data dentry flags for its dentrys
that are being created but not yet hashed and for its dentrys that have
been rmdir()ed but not yet freed. It needs to do this so it can block
processes in these states until a status has been returned to indicate
the given operation is complete.
It does this by keeping two lists, active and expring, of dentrys in
this state and uses ->d_release() to keep them stable while it checks
the reference count to determine if they should be used.
But with the recent lockref changes dentrys being freed sometimes don't
transition to a reference count of 0 before being freed so autofs can
occassionally use a dentry that is invalid which can lead to a panic.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yan, Zheng [Mon, 14 Apr 2014 05:13:02 +0000 (13:13 +0800)]
ceph: clear directory's completeness when creating file
commit
0a8a70f96fe1bd3e07c15bb86fd247e76102398a upstream.
When creating a file, ceph_set_dentry_offset() puts the new dentry
at the end of directory's d_subdirs, then set the dentry's offset
based on directory's max offset. The offset does not reflect the
real postion of the dentry in directory. Later readdir reply from
MDS may change the dentry's position/offset. This inconsistency
can cause missing/duplicate entries in readdir result if readdir
is partly satisfied by dcache_readdir().
The fix is clear directory's completeness after creating/renaming
file. It prevents later readdir from using dcache_readdir().
Fixes: http://tracker.ceph.com/issues/8025
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ertman [Tue, 25 Mar 2014 04:27:55 +0000 (04:27 +0000)]
e1000e: Fix no connectivity when driver loaded with cable out
commit
b20a774495671f037e7160ea2ce8789af6b61533 upstream.
In commit
da1e2046e5, the flow for enabling/disabling an Si errata
workaround (e1000_lv_jumbo_workaround_ich8lan) was changed to fix a problem
with iAMT connections dropping on interface down with jumbo frames set.
Part of this change was to move the function call disabling the workaround
to e1000e_down() from the e1000_setup_rctl() function. The mechanic for
disabling of this workaround involves writing several MAC and PHY registers
back to hardware defaults.
After this commit, when the driver is loaded with the cable out, the PHY
registers are not programmed with the correct default values. This causes
the device to be capable of transmitting packets, but is unable to recieve
them until this workaround is called.
The flow of e1000e's open code relies upon calling the above workaround to
expicitly program these registers either with jumbo frame appropriate settings
or h/w defaults on 82579 and newer hardware.
Fix this issue by adding logic to e1000_setup_rctl() that not only calls
e1000_lv_jumbo_workaround_ich8lan() when jumbo frames are set, to enable the
workaround, but also calls this function to explicitly disable the workaround
in the case that jumbo frames are not set.
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 20 Apr 2014 05:26:41 +0000 (22:26 -0700)]
Input: synaptics - report INPUT_PROP_TOPBUTTONPAD property
commit
43e19888b1fe2a3e8a5543030c5b286cde38b3f5 upstream.
Check PNP ID of the PS/2 AUX port and report INPUT_PROP_TOPBUTTONPAD
property for for touchpads with top button areas.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 20 Apr 2014 05:25:45 +0000 (22:25 -0700)]
Input: Add INPUT_PROP_TOPBUTTONPAD device property
commit
f37c013409bb78ebb958821aa10d069e707cabac upstream.
On some newer laptops with a trackpoint the physical buttons for the
trackpoint have been removed to allow for a larger touchpad. On these
laptops the buttonpad has clearly marked areas on the top which are to be
used as trackpad buttons.
Users of the event device-node need to know about this, so that they can
properly interpret BTN_LEFT events as being a left / right / middle click
depending on where on the button pad the clicking finger is.
This commits adds a INPUT_PROP_TOPBUTTONPAD device property which drivers
for such buttonpads will use to signal to the user that this buttonpad not
only has the normal bottom button area, but also a top button area.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 20 Apr 2014 03:47:35 +0000 (20:47 -0700)]
Input: i8042 - add firmware_id support
commit
a7c5868c3482127cb308c779b8a6460a3353c17f upstream.
Fill in the new serio firmware_id sysfs attribute for pnp instantiated
8042 serio ports.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 20 Apr 2014 03:39:35 +0000 (20:39 -0700)]
Input: serio - add firmware_id sysfs attribute
commit
0456c66f4e905e1ca839318219c770988b47975c upstream.
serio devices exposed via platform firmware interfaces such as ACPI may
provide additional identifying information of use to userspace.
We don't associate the serio devices with the firmware device (we don't
set it as parent), so there's no way for userspace to make use of this
information.
We cannot change the parent for serio devices instantiated though a
firmware interface as that would break suspend / resume ordering.
Therefore this patch adds a new firmware_id sysfs attribute so that
userspace can get a string from there with any additional identifying
information the firmware interface may provide.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chew, Kean ho [Fri, 28 Feb 2014 16:03:56 +0000 (00:03 +0800)]
i2c: i801: enable Intel BayTrail SMBUS
commit
1b31e9b76ef8c62291e698dfdb973499986a7f68 upstream.
Add Device ID of Intel BayTrail SMBus Controller.
Signed-off-by: Chew, Kean ho <kean.ho.chew@intel.com>
Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: "Chang, Rebecca Swee Fun" <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Salva Peiró [Wed, 30 Apr 2014 17:48:02 +0000 (19:48 +0200)]
media: media-device: fix infoleak in ioctl media_enum_entities()
commit
e6a623460e5fc960ac3ee9f946d3106233fd28d8 upstream.
This fixes CVE-2014-1739.
Signed-off-by: Salva Peiró <speiro@ai2.upv.es>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 7 Nov 2013 08:08:44 +0000 (08:08 +0000)]
clk: vexpress: NULL dereference on error path
commit
6b4ed8b00e93bd31f24a25f59ed8d1b808d0cc00 upstream.
If the allocation fails then we dereference the NULL in the error path.
Just return directly.
Fixes:
ed27ff1db869 ('clk: Versatile Express clock generators ("osc") driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Chen [Mon, 17 Mar 2014 23:52:26 +0000 (16:52 -0700)]
crypto: crypto_wq - Fix late crypto work queue initialization
commit
130fa5bc81b44b6cc1fbdea3abf6db0da22964e0 upstream.
The crypto algorithm modules utilizing the crypto daemon could
be used early when the system start up. Using module_init
does not guarantee that the daemon's work queue is initialized
when the cypto alorithm depending on crypto_wq starts. It is necessary
to initialize the crypto work queue earlier at the subsystem
init time to make sure that it is initialized
when used.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aristeu Rozanski [Mon, 5 May 2014 15:18:59 +0000 (11:18 -0400)]
device_cgroup: check if exception removal is allowed
commit
d2c2b11cfa134f4fbdcc34088824da26a084d8de upstream.
[PATCH v3 1/2] device_cgroup: check if exception removal is allowed
When the device cgroup hierarchy was introduced in
bd2953ebbb53 - devcg: propagate local changes down the hierarchy
a specific case was overlooked. Consider the hierarchy bellow:
A default policy: ALLOW, exceptions will deny access
\
B default policy: ALLOW, exceptions will deny access
There's no need to verify when an new exception is added to B because
in this case exceptions will deny access to further devices, which is
always fine. Hierarchy in device cgroup only makes sure B won't have
more access than A.
But when an exception is removed (by writing devices.allow), it isn't
checked if the user is in fact removing an inherited exception from A,
thus giving more access to B.
Example:
# echo 'a' >A/devices.allow
# echo 'c 1:3 rw' >A/devices.deny
# echo $$ >A/B/tasks
# echo >/dev/null
-bash: /dev/null: Operation not permitted
# echo 'c 1:3 w' >A/B/devices.allow
# echo >/dev/null
#
This shouldn't be allowed and this patch fixes it by making sure to never allow
exceptions in this case to be removed if the exception is partially or fully
present on the parent.
v3: missing '*' in function description
v2: improved log message and formatting fixes
Cc: cgroups@vger.kernel.org
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aristeu Rozanski [Mon, 21 Apr 2014 16:13:03 +0000 (12:13 -0400)]
device_cgroup: rework device access check and exception checking
commit
79d719749d23234e9b725098aa49133f3ef7299d upstream.
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Mon, 14 Apr 2014 16:52:14 +0000 (18:52 +0200)]
Documentation: Update stable address in Chinese and Japanese translations
commit
98b0f811aade1b7c6e7806c86aa0befd5919d65f upstream.
The English and Korean translations were updated, the Chinese and Japanese
weren't.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emil Goode [Sun, 9 Mar 2014 20:06:51 +0000 (21:06 +0100)]
brcmsmac: fix deadlock on missing firmware
commit
8fc1e8c240aab968db658b2d8d079b4391207a36 upstream.
When brcm80211 firmware is not installed networking hangs.
A deadlock happens because we call ieee80211_unregister_hw()
from the .start callback of struct ieee80211_ops. When .start
is called we are under rtnl lock and ieee80211_unregister_hw()
tries to take it again.
Function call stack:
dev_change_flags()
__dev_change_flags()
__dev_open()
ASSERT_RTNL() <-- Assert rtnl lock
ops->ndo_open()
.ndo_open = ieee80211_open,
ieee80211_open()
ieee80211_do_open()
drv_start()
local->ops->start()
.start = brcms_ops_start,
brcms_ops_start()
brcms_remove()
ieee80211_unregister_hw()
rtnl_lock() <-- Here we deadlock
Introduced by:
commit
25b5632fb35ca61b8ae3eee235edcdc2883f7a5e
("brcmsmac: request firmware in .start() callback")
This patch fixes the bug by removing the call to brcms_remove()
and moves the brcms_request_fw() call to the top of the .start
callback to not initiate anything unless firmware is installed.
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Sun, 6 Apr 2014 22:20:03 +0000 (15:20 -0700)]
leds: leds-pwm: properly clean up after probe failure
commit
392369019eb96e914234ea21eda806cb51a1073e upstream.
When probing with DT, we add each LED one at a time. If we find a LED
without a PWM device (because it is not available yet) we fail the
initialisation, unregister previous LEDs, and then by way of managed
resources, we free the structure.
The problem with this is we may have a scheduled and active work_struct
in this structure, and this results in a nasty kernel oops.
We need to cancel this work_struct properly upon cleanup - and the
cleanup we require is the same cleanup as we do when the LED platform
device is removed. Rather than writing this same code three times,
move it into a separate function and use it in all three places.
Fixes:
c971ff185f64 ("leds: leds-pwm: Defer led_pwm_set() if PWM can sleep")
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Peres [Thu, 13 Mar 2014 23:26:52 +0000 (00:26 +0100)]
drm/nouveau/pm/fan: drop the fan lock in fan_update() before rescheduling
commit
61679fe153b2b9ea5b5e2ab93305419e85e99a9d upstream.
This should fix a deadlock that has been reported to us where fan_update()
would hold the fan lock and try to grab the alarm_program_lock to reschedule
an update. On an other CPU, the alarm_program_lock would have been taken
before calling fan_update(), leading to a deadlock.
We should Cc: <stable@vger.kernel.org> # 3.9+
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Timothée Ravier <tim@siosm.fr>
Tested-by: Boris Fersing (IRC nick fersingb, no public email address)
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Paasch [Fri, 21 Mar 2014 11:02:09 +0000 (04:02 -0700)]
igb: Unset IGB_FLAG_HAS_MSIX-flag when falling back to msi-only
commit
b709323d2477614823a38c2f2a9a206e087e28fc upstream.
Prior to
cd14ef54d25 (igb: Change to use statically allocated array for
MSIx entries), having msix_entries different from NULL was an indicator
that MSIX is enabled.
In igb_set_interrupt_capabiliy we may fall back to MSI-only. Prior to
the above patch msix_entries was set to NULL by
igb_reset_interrupt_capability.
However, now we are checking the flag for IGB_FLAG_HAS_MSIX and so the
stack gets completly confused:
[ 42.659791] ------------[ cut here ]------------
[ 42.715032] WARNING: CPU: 7 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x15c/0x1fb()
[ 42.848263] NETDEV WATCHDOG: eth0 (igb): transmit queue 0 timed out
[ 42.923253] Modules linked in:
[ 42.959875] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 3.14.0-rc2-mptcp #437
[ 43.043184] Hardware name: HP ProLiant DL165 G7, BIOS O37 01/26/2011
[ 43.119215]
0000000000000108 ffff88023fdc3da8 ffffffff81487847 0000000000000108
[ 43.208165]
ffff88023fdc3df8 ffff88023fdc3de8 ffffffff81034e7d ffff88023fdc3dd8
[ 43.297120]
ffffffff813fff10 ffff880236018000 ffff880236b178c0 0000000000000008
[ 43.386071] Call Trace:
[ 43.415303] <IRQ> [<
ffffffff81487847>] dump_stack+0x49/0x62
[ 43.484174] [<
ffffffff81034e7d>] warn_slowpath_common+0x77/0x91
[ 43.556049] [<
ffffffff813fff10>] ? dev_watchdog+0x15c/0x1fb
[ 43.623759] [<
ffffffff81034f2b>] warn_slowpath_fmt+0x41/0x43
[ 43.692511] [<
ffffffff813fff10>] dev_watchdog+0x15c/0x1fb
[ 43.758141] [<
ffffffff813ffdb4>] ? __netdev_watchdog_up+0x64/0x64
[ 43.832091] [<
ffffffff8103cd04>] call_timer_fn+0x17/0x6f
[ 43.896682] [<
ffffffff8103cebe>] run_timer_softirq+0x162/0x1a2
[ 43.967511] [<
ffffffff81038520>] __do_softirq+0xcd/0x1cc
[ 44.032104] [<
ffffffff81038689>] irq_exit+0x3a/0x48
[ 44.091492] [<
ffffffff81026d43>] smp_apic_timer_interrupt+0x43/0x50
[ 44.167525] [<
ffffffff8148c24a>] apic_timer_interrupt+0x6a/0x70
[ 44.239392] <EOI> [<
ffffffff8100992c>] ? default_idle+0x6/0x8
[ 44.310343] [<
ffffffff81009b31>] arch_cpu_idle+0x13/0x18
[ 44.374934] [<
ffffffff81066126>] cpu_startup_entry+0xa7/0x101
[ 44.444724] [<
ffffffff81025660>] start_secondary+0x1b2/0x1b7
[ 44.513472] ---[ end trace
a5a075fd4e7f854f ]---
[ 44.568753] igb 0000:04:00.0 eth0: Reset adapter
[ 46.206945] random: nonblocking pool is initialized
[ 46.465670] irq 44: nobody cared (try booting with the "irqpoll" option)
[ 46.545862] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G W 3.14.0-rc2-mptcp #437
[ 46.640610] Hardware name: HP ProLiant DL165 G7, BIOS O37 01/26/2011
[ 46.716641]
ffff8802363f8c84 ffff88023fdc3e38 ffffffff81487847 00000000a03cdb6d
[ 46.805598]
ffff8802363f8c00 ffff88023fdc3e68 ffffffff81068489 0000007f81825400
[ 46.894539]
ffff8802363f8c00 0000000000000000 0000000000000000 ffff88023fdc3ea8
[ 46.983484] Call Trace:
[ 47.012714] <IRQ> [<
ffffffff81487847>] dump_stack+0x49/0x62
[ 47.081585] [<
ffffffff81068489>] __report_bad_irq+0x35/0xc1
[ 47.149295] [<
ffffffff81068683>] note_interrupt+0x16e/0x1ea
[ 47.217006] [<
ffffffff8106679e>] handle_irq_event_percpu+0x116/0x12e
[ 47.294075] [<
ffffffff810667e9>] handle_irq_event+0x33/0x4f
[ 47.361787] [<
ffffffff81068c95>] handle_fasteoi_irq+0x83/0xd1
[ 47.431577] [<
ffffffff81003d5b>] handle_irq+0x1f/0x28
[ 47.493047] [<
ffffffff81003567>] do_IRQ+0x4e/0xd4
[ 47.550358] [<
ffffffff8148b06a>] common_interrupt+0x6a/0x6a
[ 47.618066] <EOI> [<
ffffffff8100992c>] ? default_idle+0x6/0x8
[ 47.689016] [<
ffffffff81009b31>] arch_cpu_idle+0x13/0x18
[ 47.753605] [<
ffffffff81066126>] cpu_startup_entry+0xa7/0x101
[ 47.823397] [<
ffffffff81025660>] start_secondary+0x1b2/0x1b7
[ 47.892146] handlers:
[ 47.919301] [<
ffffffff812fbd7d>] igb_intr
So, this patch unsets the flag to indicate that we are not using MSIX.
This patch does exactly this: Unsetting the flag when falling back to MSI.
Fixes:
cd14ef54d25b (igb: Change to use statically allocated array for MSIx entries)
Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Paasch [Fri, 21 Mar 2014 10:48:19 +0000 (03:48 -0700)]
igb: Fix Null-pointer dereference in igb_reset_q_vector
commit
cb06d102327eadcd1bdc480bfd9f8876251d1007 upstream.
When igb_set_interrupt_capability() calls
igb_reset_interrupt_capability() (e.g., because CONFIG_PCI_MSI is unset),
num_q_vectors has been set but no vector has yet been allocated.
igb_reset_interrupt_capability() will then call igb_reset_q_vector,
which assumes that the vector is allocated. As this is not the case, we
are accessing a NULL-pointer.
This patch fixes it by checking that q_vector is indeed different from
NULL.
Fixes:
02ef6e1d0b0023 (igb: Fix queue allocation method to accommodate changing during runtime)
Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 15 Jan 2014 06:43:39 +0000 (06:43 +0000)]
i40e: potential array underflow in i40e_vc_process_vf_msg()
commit
c243e96335c56e56dcf6a00593104554fb06b689 upstream.
If "vf_id" is smaller than hw->func_caps.vf_base_id then it leads to
an array underflow of the pf->vf[] array. This is unlikely to happen
unless the hardware is bad, but it's a small change and it silences a
static checker warning.
Fixes:
7efa84b7abc1 ('i40e: support VFs on PFs other than 0')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Lu [Mon, 12 May 2014 08:55:45 +0000 (16:55 +0800)]
drm/i915: restore backlight precision when converting from ACPI
commit
721e82c08c1afd6b47367b0e0c4a62140b0667f3 upstream.
When we set backlight on behalf of ACPI opregion, we will convert the
backlight value in the 0-255 range defined in opregion to the actual
hardware level. Commit
22505b82a2 (drm/i915: avoid brightness overflow
when doing scale) is meant to fix the overflow problem when doing the
conversion, but it also caused a problem that the converted hardware
level doesn't quite represent the intended value: say user wants maximum
backlight level(255 in opregion's range), then we will calculate the
actual hardware level to be: level = freq / max * level, where freq is
the hardware's max backlight level(937 on an user's box), and max and
level are all 255. The converted value should be 937 but the above
calculation will yield 765.
To fix this issue, just use 64 bits to do the calculation to keep the
precision and avoid overflow at the same time.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491
Reported-by: Nico Schottelius <nico-bugzilla.kernel.org@schottelius.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Fri, 9 May 2014 11:52:34 +0000 (14:52 +0300)]
drm/i915/vlv: reset VLV media force wake request register
commit
05adaf1f101f25f40f12c29403e6488f0e45f6b6 upstream.
Media force wake get hangs the machine when the system is booted without
displays attached. The assumption is that (at least some versions of)
the firmware has skipped some initialization in that case.
Empirical evidence suggests we need to reset the media force wake
request register in addition to the render one to avoid hangs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75895
Reported-by: Imre Deak <imre.deak@intel.com>
Reported-by: Darren Hart <dvhart@linux.intel.com>
Tested-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maarten Lankhorst [Thu, 1 May 2014 11:58:05 +0000 (13:58 +0200)]
drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip
commit
806cbc5026933a781b66adecf6d1658fde9138e6 upstream.
Fixes a regression introduced by
060810d7abaabca "drm/nouveau: fix locking
issues in page flipping paths". chan->cli->mutex is unlocked a second time
in the fail_unreserve path, fix this by moving mutex_unlock down.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilia Mirkin [Wed, 26 Mar 2014 23:37:21 +0000 (19:37 -0400)]
drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi
commit
a3d0b1218d351c6e6f3cea36abe22236a08cb246 upstream.
There appear to be a crop of new hardware where the vbios is not
available from PROM/PRAMIN, but there is a valid _ROM method in ACPI.
The data read from PCIROM almost invariably contains invalid
instructions (still has the x86 opcodes), which makes this a low-risk
way to try to obtain a valid vbios image.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76475
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Sat, 26 Apr 2014 20:59:04 +0000 (21:59 +0100)]
rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init()
commit
3234f5b06fc3094176a86772cc64baf3decc98fc upstream.
Fixes:
a53268be0cb9 ('rtlwifi: rtl8192cu: Fix too long disable of IRQs')
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liu Hua [Thu, 27 Mar 2014 05:56:18 +0000 (06:56 +0100)]
ARM: 8012/1: kdump: Avoid overflow when converting pfn to physaddr
commit
8fad87bca7ac9737e413ba5f1656f1114a8c314d upstream.
When we configure CONFIG_ARM_LPAE=y, pfn << PAGE_SHIFT will
overflow if pfn >= 0x100000 in copy_oldmem_page.
So use __pfn_to_phys for converting.
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>