review.tizen.org Git - platform/kernel/linux-rpi.git/log

platform/x86: think-lmi: Split current_value to reflect only the value

Currently attributes will show things like:
`BootOrderLock,Disable`
rather than just
`Disable`.

Of course this works, but the attribute is intended to be read by
userspace tools and not require further processing. That is a userspace
tool can display a drop down of `possible_values` and `current_value` is
one of them from the list.

This also aligns `think-lmi` with how `dell-wmi-sysman` works.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210622200755.12379-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: think-lmi: Fix issues with duplicate attributes

On an AMD based Lenovo T14, I find that the module doesn't work at
all, and instead has a traceback with messages like:

```
sysfs: cannot create duplicate filename '/devices/virtual/firmware-attributes/thinklmi/attributes/Reserved'
```

Duplicate and reserved values showing up appear to be a firmware bug,
but they shouldn't make the driver explode. So catch them and skip
them.

Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210622200755.12379-2-mario.limonciello@amd.com
[hdegoede@redhat.com: Add missing kfree(tlmi_priv.setting[i])]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string

Commit 0ddcf3a6b442 ("platform/x86: think-lmi: Avoid potential read before
start of the buffer") moved the length == 0 up to before stripping the '\n'
which typically gets added when users echo a value to a sysfs-attribute
from the shell.

This avoids a potential buffer-underrun, but it also causes a behavioral
change, prior to this change "echo > kbdlang", iow writing just a single
'\n' would result in an EINVAL error, but after the change this gets
accepted setting kbdlang to an empty string.

Fix this by replacing the manual '\n' check with using strchrnul() to get
the length till '\n' or terminating 0 in one go; and then do the
length != 0 check after this.

Fixes: 0ddcf3a6b442 ("platform/x86: think-lmi: Avoid potential read before start of the buffer")
Reported-by: Juha Leppänen <juha_efku@dnainternet.net>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210621193648.44138-1-hdegoede@redhat.com

platform/x86: intel_cht_int33fe: Move to its own subfolder

Since we have started collecting Intel x86 specific drivers in their own
folder, move intel_cht_int33fe to its own subfolder there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_skl_int3472: Move to intel/ subfolder

Start collecting Intel x86 related drivers in its own subfolder.
Move intel_skl_int3472 first.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()

For the sake of APIs to be properly layered provide
skl_int3472_unregister_clock().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210618125516.53510-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()

For the sake of APIs to be properly layered provide
skl_int3472_unregister_regulator().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210618125516.53510-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly

When we call acpi_gpio_get_io_resource(), the output will be
the pointer to the ACPI GPIO resource. Use it directly instead of
dereferencing the generic resource.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210618125516.53510-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)

Besides the fact that COMMON_CLK selects CLKDEV_LOOKUP, the latter
is going to be removed from clock framework.

Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_skl_int3472: Free ACPI device resources after use

We may free ACPI device resources immediately after use.
Refactor skl_int3472_parse_crs() accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210618125516.53510-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: Remove "default n" entries

Linus already once did that for PDx86, don't repeat our mistakes.
TL;DR: 'n' *is* the default 'default'.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Merge tag 'devm-helpers-v5.14-1' into review-hans

Signed tag for the immutable devm-helpers branch for merging
into the extcon and pdx86 trees.

platform/x86: ISST: Use numa node id for cpu pci dev mapping

There is a problem in mapping CPU to a PCI device instance when the
bus numbers are reused in different packages. This was observed on
some Sapphire Rapids systems.

The current implementation reads bus number assigned to a CPU package
via MSR 0x128. This allows to establish relationship between a CPU
and a PCI device. This allows to update power related parameters to a
MMIO offset in a PCI device space which is unique to a CPU. But if
two packages uses same bus number then this mapping will not be unique.

When bus number is reused, PCI device will use different domain number
or segment number. So we need to be aware of this domain information
while matching CPU to PCI bus number. This domain information is not
available via any MSR. So need to use ACPI numa node information.

There is an interface already available in the Linux to read numa
node for a CPU and a PCI device. This change uses this interface
to check the numa node of a match PCI device with bus number.
If the bus number and numa node matches with the CPU's assigned
bus number and numa node, the matched PCI device instance will be
returned to the caller.

It is possible that before Sapphire Rapids, the numa node is not
defined for the Speed Select PCI device in some OEM systems. In this
case to restore old behavior, return the last matched PCI device
for domain 0 unlsess there are more than one matches.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210616221329.1909276-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: ISST: Optimize CPU to PCI device mapping

It was observed that some of the high performance benchmarks are spending
more time in kernel depending on which CPU package they are executing.
The difference is significant and benchmark scores varies more than 10%.
These benchmarks adjust class of service to improve thread performance
which run in parallel. This class of service change causes access to
MMIO region of Intel Speed Select PCI devices depending on the CPU
package they are executing.

This mapping from CPU to PCI device instance uses a standard Linux PCI
interface "pci_get_domain_bus_and_slot()". This function does a linear
search to get to a PCI device. Since these platforms have 100+ PCI
devices, this search can be expensive in fast path for benchmarks.

Since the device and function of PCI device is fixed for Intel
Speed Select PCI devices, the CPU to PCI device information can be cached
at the same time when bus number for the CPU is read. In this way during
runtime the cached information can be used. This improves performance
of these benchmarks significantly.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210616221329.1909276-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

tools/power/x86/intel-speed-select: v1.10 release

This release adds following change:
- Fix reporting of memory frequency

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

tools/power/x86/intel-speed-select: Fix uncore memory frequency display

The uncore memory frequency value from the mailbox command
CONFIG_TDP_GET_MEM_FREQ needs to be scaled based on the platform for
display. There is no single constant multiplier.

This change introduces CPU model specific memory frequency multiplier.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

extcon: extcon-max8997: Simplify driver using devm

Simplify driver by switching to use the resource managed IRQ
requesting and resource managed work-queue initialization.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/61190cc280a63baeb05ec570282bb3677bee8e7b.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

extcon: extcon-max8997: Fix IRQ freeing at error path

If reading MAX8997_MUIC_REG_STATUS1 fails at probe the driver exits
without freeing the requested IRQs.

Free the IRQs prior returning if reading the status fails.

Fixes: 3e34c8198960 ("extcon: max8997: Avoid forcing UART path on drive probe")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/27ee4a48ee775c3f8c9d90459c18b6f2b15edc76.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

extcon: extcon-max77693.c: Fix potential work-queue cancellation race

The extcon IRQ schedules a work item. IRQ is requested using devm while
WQ is cancelld at remove(). This mixing of devm and manual unwinding has
potential case where the WQ has been emptied (.remove() was ran) but
devm unwinding of IRQ was not yet done. It may be possible the IRQ is
triggered at this point scheduling new work item to the already flushed
queue.

According to the input documentation the input device allocated by
devm_input_allocate_device() does not need to be explicitly unregistered.
Use the new devm_work_autocancel() and remove the remove() to simplify the
code.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/cbe8205eed8276f6e6db5003cfe51b8b0d4ac966.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

extcon: extcon-max14577: Fix potential work-queue cancellation race

The extcon IRQ schedules a work item. IRQ is requested using devm while
WQ is cancelld at remove(). This mixing of devm and manual unwinding has
potential case where the WQ has been emptied (.remove() was ran) but
devm unwinding of IRQ was not yet done. It is possible the IRQ is triggered
at this point scheduling new work item to the already flushed queue.

Use new devm_work_autocancel() to remove the remove() and to kill the bug.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/ee8545f59ae3a93f0a70f640ecbd7e31cfadbcb9.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

devm-helpers: Add resource managed version of work init

A few drivers which need a work-queue must cancel work at driver detach.
Some of those implement remove() solely for this purpose. Help drivers to
avoid unnecessary remove and error-branch implementation by adding managed
verision of work initialization. This will also help drivers to avoid
mixing manual and devm based unwinding when other resources are handled by
devm.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/94ff4175e7f2ff134ed2fa7d6e7641005cc9784b.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

mfd: tps68470: Remove tps68470 MFD driver

This driver only covered one scenario in which ACPI devices with _HID
INT3472 are found, and its functionality has been taken over by the
intel-skl-int3472 module, so remove it.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210603224007.120560-7-djrscally@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: Add intel_skl_int3472 driver

ACPI devices with _HID INT3472 are currently matched to the tps68470
driver, however this does not cover all situations in which that _HID
occurs. We've encountered three possibilities:

1. On Chrome OS devices, an ACPI device with _HID INT3472 (representing
a physical TPS68470 device) that requires a GPIO and OpRegion driver
2. On devices designed for Windows, an ACPI device with _HID INT3472
(again representing a physical TPS68470 device) which requires GPIO,
Clock and Regulator drivers.
3. On other devices designed for Windows, an ACPI device with _HID
INT3472 which does **not** represent a physical TPS68470, and is instead
used as a dummy device to group some system GPIO lines which are meant
to be consumed by the sensor that is dependent on this entry.

This commit adds a new module, registering a platform driver to deal
with the 3rd scenario plus an i2c driver to deal with #1 and #2, by
querying the CLDB buffer found against INT3472 entries to determine
which is most appropriate.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210603224007.120560-6-djrscally@gmail.com
[hdegoede@redhat.com Make skl_int3472_tps68470_calc_type() static]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Merge remote-tracking branch 'linux-pm/acpi-scan' into review-hans

Merge tag 'intel-gpio-v5.14-1' into review-hans

intel-gpio for v5.14-1

* Export two functions from GPIO ACPI for wider use
* Clean up Whiskey Cove and Crystal Cove GPIO drivers

The following is an automated git shortlog grouped by driver:

crystalcove:
-  remove platform_set_drvdata() + cleanup probe

gpiolib:
-  acpi: Add acpi_gpio_get_io_resource()
-  acpi: Introduce acpi_get_and_request_gpiod() helper

wcove:
-  Split error handling for CTRL and IRQ registers
-  Unify style of to_reg() with to_ireg()
-  Use IRQ hardware number getter instead of direct access

Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans

Signed tag for the immutable platform-drivers-x86-goodix branch for merging into the input subsystem.

MAINTAINERS: Update IRC link for Surface System Aggregator subsystem

We have moved to libera.chat. Update the link accordingly.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210614194635.1681519-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: think-lmi: Add missing MODULE_DEVICE_TABLE

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1623811809-65099-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: think-lmi: Avoid potential read before start of the buffer

If length equals 0 then reading buf[length-1] will read before the start
of the buffer.

Avoid this by moving the length == 0 check up.

Cc: Mark Pearson <markpearson@lenovo.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609151752.156902-2-hdegoede@redhat.com

platform/x86: think-lmi: Fix check for admin password being set

tlmi_priv.pwd_admin->password is an array (not a pointer), so the correct
way to check for the password being set is to check for
tlmi_priv.pwd_admin->password[0] != 0.

For the second check, replace the check with checking that auth_str is
set instead.

Cc: Mark Pearson <markpearson@lenovo.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505158 ("NO_EFFECT")
Fixes: a7314b3b1d8a ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609151752.156902-1-hdegoede@redhat.com

platform/x86: dell-wmi-sysman/think-lmi: Make fw_attr_class global static

The dell-wmi-sysman and think-lmi kernel modules both have a global
struct class *fw_attr_class variable, leading to the following compile
errors when both are builtin:

ld: drivers/platform/x86/think-lmi.o:(.bss+0x0): multiple definition of `fw_attr_class'; drivers/platform/x86/dell/dell-wmi-sysman/sysman.o:(.bss+0x0): first defined here

In both cases the variable is only used in the file where it is declared.
Make both declarations static to avoid the linker error.

Cc: Mark Pearson <markpearson@lenovo.com>
Cc: Dell.Client.Kernel@dell.com
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609145952.113393-1-hdegoede@redhat.com

platform/x86: intel_ips: fix set but unused warning in read_mgtv

drivers/platform/x86/intel_ips.c:832:6: warning: variable ‘ret’ set but
not used [-Wunused-but-set-variable]
832 | u16 ret;
| ^~~

Fix it by mark ret as '__maybe_unused'.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20210607014702.2981097-1-yangerkun@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

x86/platform/uv: Constify static attribute_group struct

The only use of base_attr_group and hubless_base_attr_group is to pass
their addresses to sysfs_create_group() and sysfs_remove_group(), both
which takes pointers to const attribute_group structs. Make them const
to allow the compiler to put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Justin Ernst <justin.ernst@hpe.com>
Link: https://lore.kernel.org/r/20210605203807.60547-5-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: tc1100-wmi: Constify static attribute_group struct

The only use of tc1100_attribute_group is to pass its address to
sysfs_create_group() and sysfs_remove_group(), both which takes pointer
to const attribute_group structs. Make it const to allow the compiler to
put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605203807.60547-4-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_pmt_crashlog: Constify static attribute_group struct

The only use of pmt_crashlog_group is to assign its address to the
attr_grp field in the intel_pmt_namespace struct, which is a pointer to
const attribute_group. Make it const to allow the compiler to put it in
read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605203807.60547-3-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: hdaps: Constify static attribute_group struct

The only use of hdaps_attribute_group is to pass its address to
sysfs_create_group() and sysfs_remove_group(), both which takes pointers
to const attribute_group structs. Make it const to allow the compiler to
put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Frank Seidel <frank@f-seidel.de>
Link: https://lore.kernel.org/r/20210605203807.60547-2-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator: Use list_move_tail instead of list_del/list_add_tail in ssh_packet_layer.c

Using list_move_tail() instead of list_del() + list_add_tail() in ssh_packet_layer.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210609072448.1357524-1-libaokun1@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator: Use list_move_tail instead of list_del/list_add_tail in ssh_request_layer.c

Using list_move_tail() instead of list_del() + list_add_tail() in ssh_request_layer.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210609072638.1358174-1-libaokun1@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator: Drop unnecessary variable initialization

The status variable in ssam_controller_event_disable() is always set, no
need to initialize it.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210604210907.25738-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator: Do not return uninitialized value

The status variable in ssam_nf_refcount_disable_free() is only set when
the reference count equals zero. Otherwise, it is returned
uninitialized. Fix this by always initializing status to zero.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 640ee17199e4 ("platform/surface: aggregator: Allow enabling of events without notifiers")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210604210907.25738-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

docs: driver-api: Update Surface Aggregator user-space interface documentation

Update the controller-device user-space interface (cdev) documentation
for the newly introduced IOCTLs and event interface.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-8-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator_cdev: Add lockdep support

Mark functions with locking requirements via the corresponding lockdep
calls for debugging and documentary purposes.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-7-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator_cdev: Allow enabling of events from user-space

While events can already be enabled and disabled via the generic request
IOCTL, this bypasses the internal reference counting mechanism of the
controller. Due to that, disabling an event will turn it off regardless
of any other client having requested said event, which may break
functionality of that client.

To solve this, add IOCTLs wrapping the ssam_controller_event_enable()
and ssam_controller_event_disable() functions, which have been
previously introduced for this specific purpose.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-6-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator_cdev: Add support for forwarding events to user-space

Currently, debugging unknown events requires writing a custom driver.
This is somewhat difficult, slow to adapt, and not entirely
user-friendly for quickly trying to figure out things on devices of some
third-party user. We can do better. We already have a user-space
interface intended for debugging SAM EC requests, so let's add support
for receiving events to that.

This commit provides support for receiving events by reading from the
controller file. It additionally introduces two new IOCTLs to control
which event categories will be forwarded. Specifically, a user-space
client can specify which target categories it wants to receive events
from by registering the corresponding notifier(s) via the IOCTLs and
after that, read the received events by reading from the controller
device.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-5-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator: Update copyright

It's 2021, update the copyright accordingly.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator: Allow enabling of events without notifiers

We can already enable and disable SAM events via one of two ways: either
via a (non-observer) notifier tied to a specific event group, or a
generic event enable/disable request. In some instances, however,
neither method may be desirable.

The first method will tie the event enable request to a specific
notifier, however, when we want to receive notifications for multiple
event groups of the same target category and forward this to the same
notifier callback, we may receive duplicate events, i.e. one event per
registered notifier. The second method will bypass the internal
reference counting mechanism, meaning that a disable request will
disable the event regardless of any other client driver using it, which
may break the functionality of that driver.

To address this problem, add new functions that allow enabling and
disabling of events via the event reference counting mechanism built
into the controller, without needing to register a notifier.

This can then be used in combination with observer notifiers to process
multiple events of the same target category without duplication in the
same callback function.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210604134755.535590-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator: Allow registering notifiers without enabling events

Currently, each SSAM event notifier is directly tied to one group of
events. This makes sense as registering a notifier will automatically
take care of enabling the corresponding event group and normally drivers
only need notifications for a very limited number of events, associated
with different callbacks for each group.

However, there are rare cases, especially for debugging, when we want to
get notifications for a whole event target category instead of just a
single group of events in that category. Registering multiple notifiers,
i.e. one per group, may be infeasible due to two issues: a) we might not
know every event enable/disable specification as some events are
auto-enabled by the EC and b) forwarding this to the same callback will
lead to duplicate events as we might not know the full event
specification to perform the appropriate filtering.

This commit introduces observer-notifiers, which are notifiers that are
not tied to a specific event group and do not attempt to manage any
events. In other words, they can be registered without enabling any
event group or incrementing the corresponding reference count and just
act as silent observers, listening to all currently/previously enabled
events based on their match-specification.

Essentially, this allows us to register one single notifier for a full
event target category, meaning that we can process all events of that
target category in a single callback without duplication. Specifically,
this will be used in the cdev debug interface to forward events to
user-space via a device file from which the events can be read.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxreg-hotplug: Revert "move to use request_irq by IRQF_NO_AUTOEN flag"

It causes mlxreg-hotplug probing failure: request_threaded_irq()
returns -EINVAL due to true value of condition:
((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN))
after flag "IRQF_NO_AUTOEN" has been added to:
err = devm_request_irq(&pdev->dev, priv->irq,
       mlxreg_hotplug_irq_handler, IRQF_TRIGGER_FALLING
       | IRQF_SHARED | IRQF_NO_AUTOEN,
       "mlxreg-hotplug", priv);

This reverts commit bee3ecfed0fc ("platform/mellanox: mlxreg-hotplug: move
to use request_irq by IRQF_NO_AUTOEN flag").

Signed-off-by: Mykola Kostenok <c_mykolak@nvidia.com>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210603172827.2599908-1-c_mykolak@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: dtx: Add missing mutex_destroy() call in failure path

When we fail to open the device file due to DTX being shut down, the
mutex is initialized but never destroyed. We are destroying it when
releasing the file, so add the missing call in the failure path as well.

Fixes: 1d609992832e ("platform/surface: Add DTX driver")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210604132540.533036-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: dell-wmi-sysman: fw_attr_inuse can be static

drivers/platform/x86/firmware_attributes_class.c:11:5: warning: symbol 'fw_attr_inuse' was not declared. Should it be static?

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210603153936.GA65404@7832cb195c0b
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: thinkpad-lmi: Remove unused display_name member from struct tlmi_pwd_setting

The struct tlmi_pwd_setting display_name member is initialized,
but never read. Remove it and the TLMI_PWDTYPE_MAXLEN define.

While at it also remove some other unused [MAX]LEN defines.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210531135911.82582-1-hdegoede@redhat.com

platform/x86: think-lmi: Add WMI interface support on Lenovo platforms

For Lenovo platforms that support a WMI interface to the BIOS add
support, using the firmware-attributes class, to allow users to access
and modify various BIOS related settings.

Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210530223111.25929-3-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: dell-wmi-sysman: Use firmware_attributes_class helper

Update Dell WMI sysman driver to use newly implemented helper module.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210530223111.25929-2-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: firmware_attributes_class: Create helper file for handling firmware-attributes class registration events

This offers shared code for registering the firmware_attributes_class,
which is used by the Dell and Lenovo WMI management drivers.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210530223111.25929-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator: Fix event disable function

Disabling events silently fails due to the wrong command ID being used.
Instead of the command ID for the disable call, the command ID for the
enable call was being used. This causes the disable call to enable the
event instead. As the event is already enabled when we call this
function, the EC silently drops this command and does nothing.

Use the correct command ID for disabling the event to fix this.

Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210603000636.568846-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard()

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'error'.

Eliminate the follow smatch warning:

drivers/platform/x86/toshiba_acpi.c:2834 toshiba_acpi_setup_keyboard()
warn: missing error code 'error'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1622628348-87035-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: touchscreen_dmi: Fix Chuwi Hi10 Pro comment

Fix the comment on the entry for the Chuwi Hi10 Pro tablet:
1. Replace "Prus" type with "Pro".
2. Fix the model number, the Chuwi Hi10 Pro is the CWI529, not the CWI597.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210530104744.6720-1-hdegoede@redhat.com

platform/x86: dell-privacy: Add support for Dell hardware privacy

add support for Dell privacy driver for the Dell units equipped
hardware privacy design, which protect users privacy of audio and
camera from hardware level. Once the audio or camera privacy mode
activated, any applications will not get any audio or video stream
when user pressed ctrl+F4 hotkey, audio privacy mode will be
enabled, micmute led will be also changed accordingly
The micmute led is fully controlled by hardware & EC(embedded controller)
and camera mute hotkey is Ctrl+F9. Currently design only emits
SW_CAMERA_LENS_COVER event while the camera lens shutter will be
changed by EC & HW(hardware) control

*The flow is like this:
1) User presses key. HW does stuff with this key (timeout timer is started)
2) WMI event is emitted from BIOS to kernel
3) WMI event is received by dell-privacy
4) KEY_MICMUTE emitted from dell-privacy
5) Userland picks up key and modifies kcontrol for SW mute
6) Codec kernel driver catches and calls ledtrig_audio_set
7) dell-privacy notifies EC, the timeout is cancelled and the HW mute
   is activated. If the EC is not notified then the HW mic mute will
   activate when the timeout triggers, just a bit later than with the
   active ack.

Signed-off-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210506115605.1504-1-Perry_Yuan@Dell.com
[hdegoede@redhat.com: Rework Kconfig/Makefile bits + other small fixups]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: dell-wmi: Rename dell-wmi.c to dell-wmi-base.c

Rename dell-wmi.c to dell-wmi-base.c, so that we can have other
dell-wmi-foo.c files which can be added to dell-wmi.ko as "plugins"
controlled by separate boolean Kconfig options.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: thinkpad_acpi: Add X1 Carbon Gen 9 second fan support

The X1 Carbon Gen 9 uses two fans instead of one like the previous
generation. This adds support for the second fan. It has been tested
on my X1 Carbon Gen 9 (20XXS00100) and works fine.

Signed-off-by: Til Jasper Ullrich <tju@tju.me>
Link: https://lore.kernel.org/r/20210525150950.14805-1-tju@tju.me
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: thinkpad_acpi: Fix inconsistent indenting

Eliminate the follow smatch warning:

drivers/platform/x86/thinkpad_acpi.c:7942 volume_write() warn:
inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1621837438-70790-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: ideapad-laptop: Ignore VPC event bit 10

VPC event bit 10 gets set on a Yoga 300-11IBR when the EC believes that the
device has changed between laptop/tent/stand/tablet mode.

The EC relies on getting angle info from 2 accelerometers through a special
windows service calling a DSM on the DUAL250E ACPI-device. Linux does not
do this, making the laptop/tent/stand/tablet mode info unreliable.

Ignore VPC event bit 10 to avoid the warnings triggered by the default case
in ideapad_acpi_notify().

Note that the plan for Linux is to have iio-sensor-proxy read the 2
accelerometers and have it provide info about which mode 360° hinges
2-in-1s to the rest of userspace:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210523172331.177834-1-hdegoede@redhat.com

platform/surface: aggregator_registry: Consolidate node groups for 5th- and 6th-gen devices

5th- and 6th-generation Surface devices have all SAM clients defined in
ACPI, except for the platform profile/performance mode which his handled
via the WSID (Windows Surface Integration Device). Thus, the node groups
for those devices are the same and we can just use a single one instead
of re-defining the same one over and over again.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator_registry: Add support for 13" Intel Surface Laptop 4

Add support for the 13" Intel version of the Surface Laptop 4.

Use the existing node group for the Surface Laptop 3 since the 15" AMD
version already shares its WSID HID with its predecessor and there don't
seem to be any significant differences with regards to SAM.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator_registry: Update comments for 15" AMD Surface Laptop 4

The 15" AMD version of the Surface Laptop 4 shares its WSID HID with the
15" AMD version of the Surface Laptop 3. Update the comments
accordingly.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: asus-nb-wmi: Revert "add support for ASUS ROG Zephyrus G14 and G15"

The quirks added to asus-nb-wmi for the ASUS ROG Zephyrus G14 and G15 are
wrong, they tell the asus-wmi code to use the vendor specific WMI backlight
interface. But there is no such interface on these laptops.

As a side effect, these quirks stop the acpi_video driver to register since
they make acpi_video_get_backlight_type() return acpi_backlight_vendor,
leaving only the native AMD backlight driver in place, which is the one we
want. This happy coincidence is being replaced with a new quirk in
drivers/acpi/video_detect.c which actually sets the backlight_type to
acpi_backlight_native fixinf this properly. This reverts
commit 13bceda68fb9 ("platform/x86: asus-nb-wmi: add support for ASUS ROG
Zephyrus G14 and G15").

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210419074915.393433-3-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: asus-nb-wmi: Revert "Drop duplicate DMI quirk structures"

This is a preparation revert for reverting the "add support for ASUS ROG
Zephyrus G14 and G15" change. This reverts
commit 67186653c903 ("platform/x86: asus-nb-wmi: Drop duplicate DMI quirk
structures")

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210419074915.393433-2-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: Rename hp-wireless to wireless-hotkey

This driver was originally intended to support some HP laptops, but
later support was added for Xioami and AMD laptops.

Rename it to make it clear that it supports a larger variety of
systems.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210519174405.30155-1-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: toshiba_haps: Fix missing newline in pr_debug call in toshiba_haps_notify

The pr_debug() call in toshiba_haps_notify() is missing a newline at the
end of the string, add this.

BugLink: https://bugs.debian.org/799193
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210519135618.139701-1-hdegoede@redhat.com

platform/x86: samsung-laptop: set debugfs blobs to read only

Those blobs can only be read. So, don't confuse users with 'writable'
flags. Also, remove S_IFREG because debugfs takes care of that.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210517100746.29663-2-wsa+renesas@sang-engineering.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: samsung-laptop: use octal numbers for rwx file permissions

Andy asked me to do it before working further on the code.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210517100746.29663-1-wsa+renesas@sang-engineering.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

MAINTAINERS: Update info for telemetry

- My linux.intel.com email is no longer valid, update it to my gmail id.

Signed-off-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210513153825.77214-1-irenic.rajneesh@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: dcdbas: drop unneeded assignment in host_control_smi()

Making '==' operation with ESM_STATUS_CMD_UNSUCCESSFUL directly
after calling the function inb() is more efficient, so assignment
to 'cmd_status' is redundant.

Eliminate the following clang_analyzer warning:
drivers/platform/x86/dell/dcdbas.c:397:11: warning: Although the value
stored to 'cmd_status' is used in the enclosing expression, the value
is never actually read from 'cmd_status'

No functional change.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1620809825-84105-1-git-send-email-yang.lee@linux.alibaba.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_cht_int33fe: Correct "displayport" fwnode reference

The Type-C connector on these devices is connected to DP-2 not DP-1,
so the reference must be to the DD04 child-node of the GPU, rather
then the DD02 child-node.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210503154647.142551-10-hdegoede@redhat.com

platform/x86: dell-wmi-sysman: Make populate_foo_data functions more robust

1. Check acpi type before assignment of each property value

2. Add boundary check for properties count

Co-developed-by: Divya Bharathi <divya.bharathi@dell.com>
Signed-off-by: Divya Bharathi <divya.bharathi@dell.com>
Signed-off-by: Prasanth KSR <prasanth.ksr@dell.com>
Link: https://lore.kernel.org/r/20210512102530.9704-1-prasanth.ksr@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

ACPI: scan: initialize local variable to avoid garbage being returned

In the unlikely event that there are no callback calls made in
acpi_walk_dep_device_list(), local variable ret will be returned as
an uninitialized value.

Clean up static analysis warnings by ensuring ret is initialized.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: a9e10e587304 ("ACPI: scan: Extend acpi_walk_dep_device_list()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI: scan: Add function to fetch dependent of ACPI device

In some ACPI tables we encounter, devices use the _DEP method to assert
a dependence on other ACPI devices as opposed to the OpRegions that the
specification intends.

We need to be able to find those devices "from" the dependee, so add
a callback and a wrapper to walk over the acpi_dep_list and return
the dependent ACPI device.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI: scan: Extend acpi_walk_dep_device_list()

The acpi_walk_dep_device_list() function is not as generic as its
name implies, serving only to decrement the dependency count for each
dependent device of the input.

Extend it to accept a callback which can be applied to all the
dependencies in acpi_dep_list.

Replace all existing calls to the function with calls to a wrapper,
passing a callback that applies the same dependency reduction.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com> # for platform/surface parts
Signed-off-by: Daniel Scally <djrscally@gmail.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

gpiolib: acpi: Add acpi_gpio_get_io_resource()

Add a function to verify that a given ACPI resource represents a GpioIo()
type of resource, and return it if so.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

gpiolib: acpi: Introduce acpi_get_and_request_gpiod() helper

We need to be able to translate GPIO resources in an ACPI device's _CRS
into GPIO descriptor array. Those are represented in _CRS as a pathname
to a GPIO device plus the pin's index number: the acpi_get_gpiod()
function is perfect for that purpose.

As it's currently only used internally within the GPIO layer, provide and
export a wrapper function that additionally holds a reference to the GPIO
device.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Merge tag 'perf-urgent-2021-05-23' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
"Two perf fixes:

   - Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
     this can cause malfunction when TOS is not supported

   - Allocate the LBR XSAVE buffers along with the DS buffers upfront
     because allocating them when adding an event can deadlock"

* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
  perf/x86: Avoid touching LBR_TOS MSR for Arch LBR

Merge tag 'locking-urgent-2021-05-23' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
"Two locking fixes:

   - Invoke the lockdep tracepoints in the correct place so the ordering
     is correct again

   - Don't leave the mutex WAITER bit stale when the last waiter is
     dropping out early due to a signal as that forces all subsequent
     lock operations needlessly into the slowpath until it's cleaned up
     again"

* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
  locking/lockdep: Correct calling tracepoints

Merge tag 'irq-urgent-2021-05-23' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:

   - Allocate interrupt descriptors correctly on Mainstone PXA when
     SPARSE_IRQ is enabled; otherwise the interrupt association fails

   - Make the APPLE AIC chip driver depend on APPLE

   - Remove redundant error output on devm_ioremap_resource() failure"

* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Remove redundant error printing
  irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
  ARM: PXA: Fix cplds irqdesc allocation when using legacy mode

Merge tag 'x86_urgent_for_v5.13_rc3' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

- Fix how SEV handles MMIO accesses by forwarding potential page faults
   instead of killing the machine and by using the accessors with the
   exact functionality needed when accessing memory.

- Fix a confusion with Clang LTO compiler switches passed to the it

- Handle the case gracefully when VMGEXIT has been executed in
   userspace

* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Use __put_user()/__get_user() for data accesses
  x86/sev-es: Forward page-faults which happen during emulation
  x86/sev-es: Don't return NULL from sev_es_get_ghcb()
  x86/build: Fix location of '-plugin-opt=' flags
  x86/sev-es: Invalidate the GHCB after completing VMGEXIT
  x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch

Merge tag 'powerpc-5.13-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix breakage of strace (and other ptracers etc.) when using the new
   scv ABI (Power9 or later with glibc >= 2.33).

- Fix early_ioremap() on 64-bit, which broke booting on some machines.

Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.

* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
  powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
  powerpc: Fix early setup to make early_ioremap() work

Merge tag 'kbuild-fixes-v5.13' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- Fix short log indentation for tools builds

- Fix dummy-tools to adjust to the latest stackprotector check

* tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: dummy-tools: adjust to stricter stackprotector check
  scripts/jobserver-exec: Fix a typo ("envirnoment")
  tools build: Fix quiet cmd indentation

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"10 patches.

  Subsystems affected by this patch series: mm (pagealloc, gup, kasan,
  and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  userfaultfd: hugetlbfs: fix new flag usage in error path
  lib: kunit: suppress a compilation warning of frame size
  proc: remove Alexey from MAINTAINERS
  linux/bits.h: fix compilation error with GENMASK
  watchdog: reliable handling of timestamps
  kasan: slab: always reset the tag in get_freepointer_safe()
  tools/testing/selftests/exec: fix link error
  ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
  Revert "mm/gup: check page posion status for coredump."
  mm/shuffle: fix section mismatch warning

userfaultfd: hugetlbfs: fix new flag usage in error path

In commit d6995da31122 ("hugetlb: use page.private for hugetlb specific
page flags") the use of PagePrivate to indicate a reservation count
should be restored at free time was changed to the hugetlb specific flag
HPageRestoreReserve.  Changes to a userfaultfd error path as well as a
VM_BUG_ON() in remove_inode_hugepages() were overlooked.

Users could see incorrect hugetlb reserve counts if they experience an
error with a UFFDIO_COPY operation.  Specifically, this would be the
result of an unlikely copy_huge_page_from_user error.  There is not an
increased chance of hitting the VM_BUG_ON.

Link: https://lkml.kernel.org/r/20210521233952.236434-1-mike.kravetz@oracle.com
Fixes: d6995da31122 ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasry.mina@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: kunit: suppress a compilation warning of frame size

lib/bitfield_kunit.c: In function `test_bitfields_constants':
lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=]
}
^

As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful
for kernel devs running the KUnit test harness, and not intended for
inclusion into a production build". Therefore, it is not worth modifying
variable 'test_bitfields_constants' to clear this warning. Just suppress
it.

Link: https://lkml.kernel.org/r/20210518094533.7652-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: remove Alexey from MAINTAINERS

People Cc me and I don't have time.

Link: https://lkml.kernel.org/r/YKarMxHJBIhMHQIh@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/bits.h: fix compilation error with GENMASK

GENMASK() has an input check which uses __builtin_choose_expr() to
enable a compile time sanity check of its inputs if they are known at
compile time.

However, it turns out that __builtin_constant_p() does not always return
a compile time constant [0]. It was thought this problem was fixed with
gcc 4.9 [1], but apparently this is not the case [2].

Switch to use __is_constexpr() instead which always returns a compile time
constant, regardless of its inputs.

Link: https://lore.kernel.org/lkml/42b4342b-aefc-a16a-0d43-9f9c0d63ba7a@rasmusvillemoes.dk
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449
Link: https://lore.kernel.org/lkml/1ac7bbc2-45d9-26ed-0b33-bf382b8d858b@I-love.SAKURA.ne.jp
Link: https://lkml.kernel.org/r/20210511203716.117010-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

watchdog: reliable handling of timestamps

Commit 9bf3bc949f8a ("watchdog: cleanup handling of false positives")
tried to handle a virtual host stopped by the host a more
straightforward and cleaner way.

But it introduced a risk of false softlockup reports.  The virtual host
might be stopped at any time, for example between
kvm_check_and_clear_guest_paused() and is_softlockup().  As a result,
is_softlockup() might read the updated jiffies and detects a softlockup.

A solution might be to put back kvm_check_and_clear_guest_paused() after
is_softlockup() and detect it.  But it would put back the cycle that
complicates the logic.

In fact, the handling of all the timestamps is not reliable.  The code
does not guarantee when and how many times the timestamps are read.  For
example, "period_ts" might be touched anytime also from NMI and re-read in
is_softlockup().  It works just by chance.

Fix all the problems by making the code even more explicit.

1. Make sure that "now" and "period_ts" timestamps are read only once.
   They might be changed at anytime by NMI or when the virtual guest is
   stopped by the host.  Note that "now" timestamp does this implicitly
   because "jiffies" is marked volatile.

2. "now" time must be read first.  The state of "period_ts" will
   decide whether it will be used or the period will get restarted.

3. kvm_check_and_clear_guest_paused() must be called before reading
   "period_ts".  It touches the variable when the guest was stopped.

As a result, "now" timestamp is used only when the watchdog was not
touched and the guest not stopped in the meantime.  "period_ts" is
restarted in all other situations.

Link: https://lkml.kernel.org/r/YKT55gw+RZfyoFf7@alley
Fixes: 9bf3bc949f8aeefeacea4b ("watchdog: cleanup handling of false positives")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: slab: always reset the tag in get_freepointer_safe()

With CONFIG_DEBUG_PAGEALLOC enabled, the kernel should also untag the
object pointer, as done in get_freepointer().

Failing to do so reportedly leads to SLUB freelist corruptions that
manifest as boot-time crashes.

Link: https://lkml.kernel.org/r/20210514072228.534418-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Elliot Berman <eberman@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/testing/selftests/exec: fix link error

Fix the link error by adding '-static':

  gcc -Wall  -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
  /usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
  /usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
  /usr/bin/ld: final link failed: bad value
  collect2: error: ld returned 1 exit status
  make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1

Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com
Fixes: 206e22f01941 ("tools/testing/selftests: add self-test for verifying load alignment")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry

do_mq_timedreceive calls wq_sleep with a stack local address.  The
sender (do_mq_timedsend) uses this address to later call pipelined_send.

This leads to a very hard to trigger race where a do_mq_timedreceive
call might return and leave do_mq_timedsend to rely on an invalid
address, causing the following crash:

  RIP: 0010:wake_q_add_safe+0x13/0x60
  Call Trace:
   __x64_sys_mq_timedsend+0x2a9/0x490
   do_syscall_64+0x80/0x680
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f5928e40343

The race occurs as:

1. do_mq_timedreceive calls wq_sleep with the address of `struct
   ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it
   holds a valid `struct ext_wait_queue *` as long as the stack has not
   been overwritten.

2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and
   do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call
   __pipelined_op.

3. Sender calls __pipelined_op::smp_store_release(&this->state,
   STATE_READY).  Here is where the race window begins.  (`this` is
   `ewq_addr`.)

4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it
   will see `state == STATE_READY` and break.

5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed
   to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's
   stack.  (Although the address may not get overwritten until another
   function happens to touch it, which means it can persist around for an
   indefinite time.)

6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a
   `struct ext_wait_queue *`, and uses it to find a task_struct to pass to
   the wake_q_add_safe call.  In the lucky case where nothing has
   overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct.
   In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a
   bogus address as the receiver's task_struct causing the crash.

do_mq_timedsend::__pipelined_op() should not dereference `this` after
setting STATE_READY, as the receiver counterpart is now free to return.
Change __pipelined_op to call wake_q_add_safe on the receiver's
task_struct returned by get_task_struct, instead of dereferencing `this`
which sits on the receiver's stack.

As Manfred pointed out, the race potentially also exists in
ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare.  Fix
those in the same way.

Link: https://lkml.kernel.org/r/20210510102950.12551-1-varad.gautam@suse.com
Fixes: c5b2cbdbdac563 ("ipc/mqueue.c: update/document memory barriers")
Fixes: 8116b54e7e23ef ("ipc/sem.c: document and update memory barriers")
Fixes: 0d97a82ba830d8 ("ipc/msg.c: update and document memory barriers")
Signed-off-by: Varad Gautam <varad.gautam@suse.com>
Reported-by: Matthias von Faber <matthias.vonfaber@aox-tech.de>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "mm/gup: check page posion status for coredump."

While reviewing [1] I came across commit d3378e86d182 ("mm/gup: check
page posion status for coredump.") and noticed that this patch is broken
in two ways. First it doesn't really prevent hwpoison pages from being
dumped because hwpoison pages can be marked asynchornously at any time
after the check. Secondly, and more importantly, the patch introduces a
ref count leak because get_dump_page takes a reference on the page which
is not released.

It also seems that the patch was merged incorrectly because there were
follow up changes not included as well as discussions on how to address
the underlying problem [2]

Therefore revert the original patch.

Link: http://lkml.kernel.org/r/20210429122519.15183-4-david@redhat.com
Link: http://lkml.kernel.org/r/57ac524c-b49a-99ec-c1e4-ef5027bfb61b@redhat.com
Link: https://lkml.kernel.org/r/20210505135407.31590-1-mhocko@kernel.org
Fixes: d3378e86d182 ("mm/gup: check page posion status for coredump.")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Aili Yao <yaoaili@kingsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/shuffle: fix section mismatch warning

clang sometimes decides not to inline shuffle_zone(), but it calls a
__meminit function.  Without the extra __meminit annotation we get this
warning:

  WARNING: modpost: vmlinux.o(.text+0x2a86d4): Section mismatch in reference from the function shuffle_zone() to the function .meminit.text:__shuffle_zone()
  The function shuffle_zone() references
  the function __meminit __shuffle_zone().
  This is often because shuffle_zone lacks a __meminit
  annotation or the annotation of __shuffle_zone is wrong.

shuffle_free_memory() did not show the same problem in my tests, but it
could happen in theory as well, so mark both as __meminit.

Link: https://lkml.kernel.org/r/20210514135952.2928094-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'block-5.13-2021-05-22' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Fix BLKRRPART and deletion race (Gulam, Christoph)

- NVMe pull request (Christoph):
      - nvme-tcp corruption and timeout fixes (Sagi Grimberg, Keith
        Busch)
      - nvme-fc teardown fix (James Smart)
      - nvmet/nvme-loop memory leak fixes (Wu Bo)"

* tag 'block-5.13-2021-05-22' of git://git.kernel.dk/linux-block:
  block: fix a race between del_gendisk and BLKRRPART
  block: prevent block device lookups at the beginning of del_gendisk
  nvme-fc: clear q_live at beginning of association teardown
  nvme-tcp: rerun io_work if req_list is not empty
  nvme-tcp: fix possible use-after-completion
  nvme-loop: fix memory leak in nvme_loop_create_ctrl()
  nvmet: fix memory leak in nvmet_alloc_ctrl()