powerpc/8xx: Convert CPM1 error interrupt handler to platform driver

Add CPM error interrupt as a standalone platform driver,
to simplify the init of CPM interrupt handler.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/375a72df6e4a26c5959cc81a6c6d46152efa2306.1649226186.git.christophe.leroy@csgroup.eu

powerpc/8xx: Move CPM interrupt controller into a dedicated file

CPM interrupt controller is quite standalone. Move it into a
dedicated file. It will help for next step which will change
it to a platform driver.

This is pure code move, checkpatch report is ignored at this point,
except one parenthesis alignment which would remain at the end of
the series. All other points fly away with following patches.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d3a7dc832d905bed14b35d83410cdb69a7ba20e8.1649226186.git.christophe.leroy@csgroup.eu

cxl/ocxl: Prepare cleanup of powerpc's asm/prom.h

powerpc's asm/prom.h brings some headers that it doesn't
need itself.

In order to clean it up, first add missing headers in
users of asm/prom.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a2bae89b280e7a7cb87889635d9911d6a245e780.1648833388.git.christophe.leroy@csgroup.eu

macintosh: Prepare cleanup of powerpc's asm/prom.h

powerpc's asm/prom.h brings some headers that it doesn't
need itself.

In order to clean it up, first add missing headers in
users of asm/prom.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/04961364547fe4556e30cb302b0e20a939b83426.1648833027.git.christophe.leroy@csgroup.eu

powerpc/code-patching: Use jump_label to check if poking_init() is done

It's only during early startup that poking_init() is not done yet,
for instance when calling ftrace_init().

Once poking_init() has been called there must be a poking area, no
need to check it everytime patch_instruction() is called.

ftrace activation time is reduced by 7% with the change on an 8xx.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8d6088aca7b63247377b6d9e4897d08d935fbe93.1647962456.git.christophe.leroy@csgroup.eu

powerpc/code-patching: Use jump_label for testing freed initmem

Once init is done, initmem is freed forever so no need to
test system_state at every call to patch_instruction().

Use jump_label.

This reduces by 2% the time needed to activate ftrace on an 8xx.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0aee964721cab7316cffde21a2ca223cee14d373.1647962456.git.christophe.leroy@csgroup.eu

powerpc/code-patching: Don't call is_vmalloc_or_module_addr() without CONFIG_MODULES

If CONFIG_MODULES is not set, there is no point in checking
whether text is in module area.

This reduced the time needed to activate/deactivate ftrace
by more than 10% on an 8xx.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f3c701cce00a38620788c0fc43ff0b611a268c54.1647962456.git.christophe.leroy@csgroup.eu

powerpc: align address to page boundary in change_page_attr()

Aligning address to page boundary allows flush_tlb_kernel_range()
to know it's a single page flush and use tlbie instead of tlbia.

On 603 we now have the following code in first leg of
change_page_attr():

  2c: 55 29 00 3c  rlwinm  r9,r9,0,0,30
  30: 91 23 00 00  stw     r9,0(r3)
  34: 7c 00 22 64  tlbie   r4,r0
  38: 7c 00 04 ac  hwsync
  3c: 38 60 00 00  li      r3,0
  40: 4e 80 00 20  blr

Before we had:

  28: 55 29 00 3c  rlwinm  r9,r9,0,0,30
  2c: 91 23 00 00  stw     r9,0(r3)
  30: 54 89 00 26  rlwinm  r9,r4,0,0,19
  34: 38 84 10 00  addi    r4,r4,4096
  38: 7c 89 20 50  subf    r4,r9,r4
  3c: 28 04 10 00  cmplwi  r4,4096
  40: 41 81 00 30  bgt     70 <change_page_attr+0x70>
  44: 7c 00 4a 64  tlbie   r9,r0
  48: 7c 00 04 ac  hwsync
  4c: 38 60 00 00  li      r3,0
  50: 4e 80 00 20  blr
...
  70: 94 21 ff f0  stwu    r1,-16(r1)
  74: 7c 08 02 a6  mflr    r0
  78: 90 01 00 14  stw     r0,20(r1)
  7c: 48 00 00 01  bl      7c <change_page_attr+0x7c>
7c: R_PPC_REL24 _tlbia
  80: 80 01 00 14  lwz     r0,20(r1)
  84: 38 60 00 00  li      r3,0
  88: 7c 08 03 a6  mtlr    r0
  8c: 38 21 00 10  addi    r1,r1,16
  90: 4e 80 00 20  blr

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6bb118fb2ee89fa3c1f9cf90ed19f88220002cb0.1647877467.git.christophe.leroy@csgroup.eu

powerpc/8xx: Simplify flush_tlb_kernel_range()

In the same spirit as commit 63f501e07a85 ("powerpc/8xx: Simplify TLB
handling"), simplify flush_tlb_kernel_range() for 8xx.

8xx cannot be SMP, and has 'tlbie' and 'tlbia' instructions, so
an inline version of flush_tlb_kernel_range() for 8xx is worth it.

With this page, first leg of change_page_attr() is:

  2c: 55 29 00 3c  rlwinm  r9,r9,0,0,30
  30: 91 23 00 00  stw     r9,0(r3)
  34: 7c 00 22 64  tlbie   r4,r0
  38: 7c 00 04 ac  hwsync
  3c: 38 60 00 00  li      r3,0
  40: 4e 80 00 20  blr

Before the patch it was:

  30: 55 29 00 3c  rlwinm  r9,r9,0,0,30
  34: 91 2a 00 00  stw     r9,0(r10)
  38: 94 21 ff f0  stwu    r1,-16(r1)
  3c: 7c 08 02 a6  mflr    r0
  40: 38 83 10 00  addi    r4,r3,4096
  44: 90 01 00 14  stw     r0,20(r1)
  48: 48 00 00 01  bl      48 <change_page_attr+0x48>
48: R_PPC_REL24 flush_tlb_kernel_range
  4c: 80 01 00 14  lwz     r0,20(r1)
  50: 38 60 00 00  li      r3,0
  54: 7c 08 03 a6  mtlr    r0
  58: 38 21 00 10  addi    r1,r1,16
  5c: 4e 80 00 20  blr

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d2610043419ce3e0e53a85386baf2c3625af5cfb.1647877442.git.christophe.leroy@csgroup.eu

powerpc: Use static call for get_irq()

__do_irq() inconditionnaly calls ppc_md.get_irq()

That's definitely a hot path.

At the time being ppc_md.get_irq address is read every time
from ppc_md structure.

Replace that call by a static call, and initialise that
call after ppc_md.init_IRQ() has set ppc_md.get_irq.

Emit a warning and don't set the static call if ppc_md.init_IRQ()
is still NULL, that way the kernel won't blow up if for some
reason ppc_md.get_irq() doesn't get properly set.

With the patch:

00000000 <__SCT__ppc_get_irq>:
   0: 48 00 00 20  b       20 <__static_call_return0> <== Replaced by 'b <ppc_md.get_irq>' at runtime
...
00000020 <__static_call_return0>:
  20: 38 60 00 00  li      r3,0
  24: 4e 80 00 20  blr
...
00000058 <__do_irq>:
...
  64: 48 00 00 01  bl      64 <__do_irq+0xc>
64: R_PPC_REL24 __SCT__ppc_get_irq
  68: 2c 03 00 00  cmpwi   r3,0
...

Before the patch:

00000038 <__do_irq>:
...
  3c: 3d 20 00 00  lis     r9,0
3e: R_PPC_ADDR16_HA ppc_md+0x1c
...
  44: 81 29 00 00  lwz     r9,0(r9)
46: R_PPC_ADDR16_LO ppc_md+0x1c
...
  4c: 7d 29 03 a6  mtctr   r9
  50: 4e 80 04 21  bctrl
  54: 2c 03 00 00  cmpwi   r3,0
...

On PPC64 which doesn't implement static calls yet we get:

00000000000000d0 <__do_irq>:
...
      dc: 00 00 22 3d  addis   r9,r2,0
dc: R_PPC64_TOC16_HA .data+0x8
...
      e4: 00 00 89 e9  ld      r12,0(r9)
e4: R_PPC64_TOC16_LO_DS .data+0x8
...
      f0: a6 03 89 7d  mtctr   r12
      f4: 18 00 41 f8  std     r2,24(r1)
      f8: 21 04 80 4e  bctrl
      fc: 18 00 41 e8  ld      r2,24(r1)
...

So on PPC64 that's similar to what we get without static calls.
But at least until ppc_md.get_irq() is set the call is to
__static_call_return0.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/afb92085f930651d8b1063e4d4bf0396c80ebc7d.1647002274.git.christophe.leroy@csgroup.eu

powerpc: Use rol32() instead of opencoding in csum_fold()

rol32(x, 16) will do the rotate using rlwinm.

No need to open code using inline assembly.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/794337eff7bb803d2c4e67d9eee635390c4c48fe.1646812553.git.christophe.leroy@csgroup.eu

powerpc: Add missing headers

Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h,
asm/pci.h etc...

Include the needed headers, and remove asm/prom.h when it was
needed exclusively for pulling necessary headers.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu

powerpc: Remove asm/prom.h from all files that don't need it

Several files include asm/prom.h for no reason.

Clean it up.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop change to prom_parse.c as reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu

powerpc: Add missing declaration in asm/drmem.h

Don't rely on random inclusion of linux/of.h by users
of asm/drmem.h

Add a forward declaration of struct property and
struct device_node.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5643ec410e51b749db0636471cb7979524f9ed0e.1646767214.git.christophe.leroy@csgroup.eu

powerpc: Include asm/reg.h in asm/svm.h

is_secure_guest() uses mfmsr().

Don't rely on users to include asm/reg.h, include
it in asm/svm.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/482c82c8a29d5fb3ea279b34f107e0e775001344.1646767214.git.christophe.leroy@csgroup.eu

powerpc: Don't include asm/prom.h in asm/parport.h

parport.h needs only of_irq.h, no need to go via asm/prom.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ec796ee56cf61f16ba24e62a9d3525d11931538c.1646767214.git.christophe.leroy@csgroup.eu

powerpc/64: Move pci_device_from_OF_node() out of asm/pci-bridge.h

Move pci_device_from_OF_node() in pci64.c because it needs definition
of struct device_node and is not worth inlining.

ppc32.c already has it in pci32.c.

That way pci-bridge.h doesn't need linux/of.h (Brought by asm/prom.h
via asm/pci.h)

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3c88286b55413730d7784133993a46ef4a3607ce.1646767214.git.christophe.leroy@csgroup.eu

powerpc: Reduce csum_add() complexity for PPC64

PPC64 does everything in C, gcc is able to skip calculation
when one of the operands in zero.

Move the constant folding in PPC32 part.

This helps GCC and reduces ppc64_defconfig by 170 bytes.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a4ca63dd4c4b09e1906d08fb814af5a41d0f3fcb.1644651363.git.christophe.leroy@csgroup.eu

powerpc/64: remove system call instruction emulation

emulate_step() instruction emulation including sc instruction emulation
initially appeared in xmon. It was then moved into sstep.c where kprobes
could use it too, and later hw_breakpoint and uprobes started to use it.

Until uprobes, the only instruction emulation users were for kernel
mode instructions.

- xmon only steps / breaks on kernel addresses.
- kprobes is kernel only.
- hw_breakpoint only emulates kernel instructions, single steps user.

At one point, there was support for the kernel to execute sc
instructions, although that is long removed and it's not clear whether
there were any in-tree users. So system call emulation is not required
by the above users.

uprobes uses emulate_step and it appears possible to emulate sc
instruction in userspace. Userspace system call emulation is broken and
it's not clear it ever worked well.

The big complication is that userspace takes an interrupt to the kernel
to emulate the instruction. The user->kernel interrupt sets up registers
and interrupt stack frame expecting to return to userspace, then system
call instruction emulation re-directs that stack frame to the kernel,
early in the system call interrupt handler. This means the interrupt
return code takes the kernel->kernel restore path, which does not
restore everything as the system call interrupt handler would expect
coming from userspace. regs->iamr appears to get lost for example,
because the kernel->kernel return does not restore the user iamr.
Accounting such as irqflags tracing and CPU accounting does not get
flipped back to user mode as the system call handler expects, so those
appear to enter the kernel twice without returning to userspace.

These things may be individually fixable with various complication, but
it is a big complexity for unclear real benefit.

Furthermore, it is not possible to single step a system call instruction
since it causes an interrupt. As such, a separate patch disables probing
on system call instructions.

This patch removes system call emulation and disables stepping system
calls.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[minor commit log edit, and also get rid of '#ifdef CONFIG_PPC64']
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a412e3b3791ed83de18704c8d90f492e7a0049c0.1648648712.git.naveen.n.rao@linux.vnet.ibm.com

powerpc: Reject probes on instructions that can't be single stepped

Per the ISA, a Trace interrupt is not generated for:
- [h|u]rfi[d]
- rfscv
- sc, scv, and Trap instructions that trap
- Power-Saving Mode instructions
- other instructions that cause interrupts (other than Trace interrupts)
- the first instructions of any interrupt handler (applies to Branch and Single Step tracing;
CIABR matches may still occur)
- instructions that are emulated by software

Add a helper to check for instructions belonging to the first four
categories above and to reject kprobes, uprobes and xmon breakpoints on
such instructions. We reject probing on instructions belonging to these
categories across all ISA versions and across both BookS and BookE.

For trap instructions, we can't know in advance if they can cause a
trap, and there is no good reason to allow probing on those. Also,
uprobes already refuses to probe trap instructions and kprobes does not
allow probes on trap instructions used for kernel warnings and bugs. As
such, stop allowing any type of probes/breakpoints on trap instruction
across uprobes, kprobes and xmon.

For some of the fp/altivec instructions that can generate an interrupt
and which we emulate in the kernel (altivec assist, for example), we
check and turn off single stepping in emulate_single_step().

Instructions generating a DSI are restarted and single stepping normally
completes once the instruction is completed.

In uprobes, if a single stepped instruction results in a non-fatal
signal to be delivered to the task, such signals are "delayed" until
after the instruction completes. For fatal signals, single stepping is
cancelled and the instruction restarted in-place so that core dump
captures proper addresses.

In kprobes, we do not allow probes on instructions having an extable
entry and we also do not allow probing interrupt vectors.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f56ee979d50b8711fae350fc97870f3ca34acd75.1648648712.git.naveen.n.rao@linux.vnet.ibm.com

powerpc: Sort and de-dup primary opcodes in ppc-opcode.h

Some of the primary opcodes are duplicated. Remove those, and sort the
rest of the primary opcodes to make it easy to read.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a05edf638a2638d708fc2db0272f6317837b5eab.1648648712.git.naveen.n.rao@linux.vnet.ibm.com

powerpc: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr

powerpc/boot: Stop using RELACOUNT

So far the RELACOUNT tag from the ELF header was containing the exact
number of R_PPC_RELATIVE/R_PPC64_RELATIVE relocations. However the LLVM's
recent change [1] make it equal-or-less than the actual number which
makes it useless.

This replaces RELACOUNT in zImage loader with a pair of RELASZ and RELAENT.
The vmlinux relocation code is fixed in commit d79976918852
("powerpc/64: Add UADDR64 relocation support").

To make it more future proof, this walks through the entire .rela.dyn
section instead of assuming that the section is sorter by a relocation
type. Unlike d79976918852, this does not add unaligned UADDR/UADDR64
relocations as we are likely not to see those in practice - the zImage
is small and very arch specific so there is a smaller chance that some
generic feature (such as PRINK_INDEX) triggers unaligned relocations.

[1] https://github.com/llvm/llvm-project/commit/da0e5b885b25cf4

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406070038.3704604-1-aik@ozlabs.ru

powerpc: Simplify and move arch_randomize_brk()

arch_randomize_brk() is only needed for hash on book3s/64, for other
platforms the one provided by the default mmap layout is good enough.

Move it to hash_utils.c and use randomize_page() like the generic one.

And properly opt out the radix case instead of making an assumption
on mmu_highuser_ssize.

Also change to a 32M range like most other architectures instead of 8M.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eafa4d18ec8ac7b98dd02b40181e61643707cc7c.1649523076.git.christophe.leroy@csgroup.eu

powerpc/mm: Convert to default topdown mmap layout

Select CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT and
remove arch/powerpc/mm/mmap.c

This change reuses the generic framework added by
commit 67f3977f805b ("arm64, mm: move generic mmap layout
functions to mm") without any functional change.

Comparison between powerpc implementation and the generic one:
- mmap_is_legacy() is identical.
- arch_mmap_rnd() does exactly the same allthough it's written
slightly differently.
- MIN_GAP and MAX_GAP are identical.
- mmap_base() does the same but uses STACK_RND_MASK which provides
the same values as stack_maxrandom_size().
- arch_pick_mmap_layout() is identical.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/518f9def87d3c889d5958103e7463cf45a2f673d.1649523076.git.christophe.leroy@csgroup.eu

powerpc/mm: Enable full randomisation of memory mappings

Do like most other architectures and provide randomisation also to
"legacy" memory mappings, by adding the random factor to
mm->mmap_base in arch_pick_mmap_layout().

See commit 8b8addf891de ("x86/mm/32: Enable full randomization on
i386 and X86_32") for all explanations and benefits of that mmap
randomisation.

At the moment, slice_find_area_bottomup() doesn't use mm->mmap_base
but uses the fixed TASK_UNMAPPED_BASE instead.
slice_find_area_bottomup() being used as a fallback to
slice_find_area_topdown(), it can't use mm->mmap_base
directly.

Instead of always using TASK_UNMAPPED_BASE as base address, leave
it to the caller. When called from slice_find_area_topdown()
TASK_UNMAPPED_BASE is used. Otherwise mm->mmap_base is used.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/417fb10dde828534c73a03138b49621d74f4e5be.1649523076.git.christophe.leroy@csgroup.eu

powerpc/mm: Move get_unmapped_area functions to slice.c

hugetlb_get_unmapped_area() is now identical to the
generic version if only RADIX is enabled, so move it
to slice.c and let it fallback on the generic one
when HASH MMU is not compiled in.

Do the same with arch_get_unmapped_area() and
arch_get_unmapped_area_topdown().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b5d9c124e82889e0cb115c150915a0c0d84eb960.1649523076.git.christophe.leroy@csgroup.eu

powerpc/mm: Use generic_hugetlb_get_unmapped_area()

Use the generic version of arch_hugetlb_get_unmapped_area()
which is now available at all time.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/05f77014c619061638ecc52a0a4136eb04cc2799.1649523076.git.christophe.leroy@csgroup.eu

powerpc/mm: Use generic_get_unmapped_area() and call it from arch_get_unmapped_area()

Use the generic version of arch_get_unmapped_area() which
is now available at all time instead of its copy
radix__arch_get_unmapped_area()

To allow that for PPC64, add arch_get_mmap_base() and
arch_get_mmap_end() macros.

Instead of setting mm->get_unmapped_area() to either
arch_get_unmapped_area() or generic_get_unmapped_area(),
always set it to arch_get_unmapped_area() and call
generic_get_unmapped_area() from there when radix is enabled.

Do the same with radix__arch_get_unmapped_area_topdown()

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/393be1fa386446443682fdb74544d733f68ef3bb.1649523076.git.christophe.leroy@csgroup.eu

powerpc/mm: Remove CONFIG_PPC_MM_SLICES

CONFIG_PPC_MM_SLICES is always selected by hash book3s/64.
CONFIG_PPC_MM_SLICES is never selected by other platforms.

Remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dc2cdc204de8978574bf7c02329b6cfc4db0bce7.1649523076.git.christophe.leroy@csgroup.eu

powerpc/mm: Make slice specific to book3s/64

Since commit 555904d07eef ("powerpc/8xx: MM_SLICE is not needed
anymore") only book3s/64 selects CONFIG_PPC_MM_SLICES.

Move slice.c into mm/book3s64/

Move necessary stuff in asm/book3s/64/slice.h and
remove asm/slice.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4a0d74ef1966a5902b5fd4ac4b513a760a6d675a.1649523076.git.christophe.leroy@csgroup.eu

powerpc/mm: Move vma_mmu_pagesize()

vma_mmu_pagesize() is only required for slices,
otherwise there is a generic weak version doing the
exact same thing.

Move it to slice.c

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1302e000d529c93d07208f1fae90f938e7a551b4.1649523076.git.christophe.leroy@csgroup.eu

mm: Add len and flags parameters to arch_get_mmap_end()

Powerpc needs flags and len to make decision on arch_get_mmap_end().

So add them as parameters to arch_get_mmap_end().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b556daabe7d2bdb2361c4d6130280da7c1ba2c14.1649523076.git.christophe.leroy@csgroup.eu

mm, hugetlbfs: Allow an arch to always use generic versions of get_unmapped_area functions

Unlike most architectures, powerpc can only define at runtime
if it is going to use the generic arch_get_unmapped_area() or not.

Today, powerpc has a copy of the generic arch_get_unmapped_area()
because when selection HAVE_ARCH_UNMAPPED_AREA the generic
arch_get_unmapped_area() is not available.

Rename it generic_get_unmapped_area() and make it independent of
HAVE_ARCH_UNMAPPED_AREA.

Do the same for arch_get_unmapped_area_topdown() versus
HAVE_ARCH_UNMAPPED_AREA_TOPDOWN.

Do the same for hugetlb_get_unmapped_area() versus
HAVE_ARCH_HUGETLB_UNMAPPED_AREA.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/77f9d3e592f1c8511df9381aa1c4e754651da4d1.1649523076.git.christophe.leroy@csgroup.eu

mm: Allow arch specific arch_randomize_brk() with CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT

Commit e7142bf5d231 ("arm64, mm: make randomization selected by
generic topdown mmap layout") introduced a default version of
arch_randomize_brk() provided when
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT is selected.

powerpc could select CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
but needs to provide its own arch_randomize_brk().

In order to allow that, define generic version of arch_randomize_brk()
as a __weak symbol.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b222f1ca06c850daf1b2f26afdb46c6dd97d21ba.1649523076.git.christophe.leroy@csgroup.eu

Merge tag 'v5.18-rc4' into next

Merge master into next, to bring in commit 5f24d5a579d1 ("mm, hugetlb:
allow for "high" userspace addresses"), which is needed as a
prerequisite for the series converting powerpc to the generic mmap
logic.

powerpc/eeh: Remove unused inline functions

pseries_eeh_init_edev() is used exclusively in eeh_pseries.c, make it
static and remove unused inline function.

pseries_eeh_init_edev_recursive() is only called from files build wich
CONFIG_HOTPLUG_PCI_RPA which depends on CONFIG_PSERIES and CONFIG_EEH,
so can remove the unused inline version.

Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220316104239.26508-1-yuehaibing@huawei.com

powerpc/powermac: Use for_each_property_of_node()

Replace open-coded for loop with for_each_property_of_node().

Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/4xx/cpm: Fix return value of __setup() handler

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.

A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.

Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from cpm_powersave_off().

Fixes: d164f6d4f910 ("powerpc/4xx: Add suspend and idle support")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192941.20955-1-rdunlap@infradead.org

powerpc/idle: Fix return value of __setup() handler

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.

A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.

Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from powersave_off().

Fixes: 302eca184fb8 ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org

powerpc/5xx: Drop unnecessary cast

do_div() does a 64-by-32 division, the 2nd parameter is a u32.

gbp->ipb_freq is already a u32, there's no need to transform it to u64
before passing it to do_div().

Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add some detail to change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1644395696-3545-1-git-send-email-wangqing@vivo.com

selftests/powerpc: Fix typo in spectre_v2

Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210608054851.164659-1-ruscur@russell.cc

macintosh: Use for_each_child_of_node() macro

Use for_each_child_of_node() macro instead of open coding it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1623034908-30525-1-git-send-email-zou_wei@huawei.com

powerpc/book3e: Fix sparse report in mm/nohash/fsl_book3e.c

Make tlbcam_addrs[] static.

Declare TLBCAM[] in mm/mmu_decl.h

And use NULL instead of 0 as pointer when calling restore_to_as0().

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fd0cc30b5556428ce1d8a1fc0f983b462e88a956.1647200488.git.christophe.leroy@csgroup.eu

powerpc/kuap: Remove unused inline function __kuap_assert_locked()

commit 2341964e27b0 ("powerpc/kuap: Remove __kuap_assert_locked()")
left behind this one, remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220311130017.22936-1-yuehaibing@huawei.com

powerpc/smp: Remove unused inline functions

commit 441c19c8a290 ("powerpc/kvm/book3s_hv: Rework the secondary
inhibit code") left behind this, so can remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210324140752.11320-1-yuehaibing@huawei.com

powerpc: Remove redundant spaces to match coding style

These one line of code don't meet the kernel coding style, so remove the
redundant space.

Signed-off-by: maqiang <maqianga@uniontech.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210303115710.30886-1-maqianga@uniontech.com

powerpc: Fix missing declaration of [en/dis]able_kernel_altivec()

When CONFIG_PPC64 is set and CONFIG_ALTIVEC is not the following build
failures occur:

   drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c: In function 'dc_fpu_begin':
>> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c:61:17: error: implicit declaration of function 'enable_kernel_altivec'; did you mean 'enable_kernel_vsx'? [-Werror=implicit-function-declaration]
      61 |                 enable_kernel_altivec();
         |                 ^~~~~~~~~~~~~~~~~~~~~
         |                 enable_kernel_vsx
   drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c: In function 'dc_fpu_end':
>> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c:89:17: error: implicit declaration of function 'disable_kernel_altivec'; did you mean 'disable_kernel_vsx'? [-Werror=implicit-function-declaration]
      89 |                 disable_kernel_altivec();
         |                 ^~~~~~~~~~~~~~~~~~~~~~
         |                 disable_kernel_vsx
   cc1: some warnings being treated as errors

This commit adds stub instances of both enable_kernel_altivec() and
disable_kernel_altivec() the same way as done in commit bd73758803c2
regarding enable_kernel_vsx() and disable_kernel_vsx().

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220221230741.293064-1-magalilemes00@gmail.com

macintosh: Fix warning comparing pointer to 0

Fix the following coccicheck warnings:
./drivers/macintosh/via-cuda.c:240:16-17: WARNING comparing pointer to 0
./drivers/macintosh/via-cuda.c:243:16-17: WARNING comparing pointer to
0, suggest !E
./drivers/macintosh/via-cuda.c:521:23-24: WARNING comparing pointer to 0

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220214010558.130201-1-yang.lee@linux.alibaba.com

powerpc/fadump: Use swap() instead of open coding it

Clean the following coccicheck warning:

./arch/powerpc/kernel/fadump.c:1291:34-35: WARNING opportunity for
swap().

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220129034847.76902-1-jiapeng.chong@linux.alibaba.com

macintosh/ams: Remove unneeded result variable

Return the value from i2c_add_driver() directly instead of storing it in
another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220118075252.925616-1-chi.minghao@zte.com.cn

powerpc: No need to initialise statics to 0

Static variables do not need to be initialised to 0, because compiler
will initialise all uninitialised statics to 0. Thus, remove the
unneeded initializations.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221033423.29820-1-wangxiang@cdjrlc.com

macintosh/adb: Use swap() to make code cleaner

Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211104011456.1027830-1-yang.guang5@zte.com.cn

powerpc/fadump: Correct two typos in a comment

Fix typos of 'remaining' and 'those'.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Matthew Wilcox <willy@infradead.org> # 'remaining'
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211030002619.2063-1-rdunlap@infradead.org

macintosh/ams: Replace snprintf in show functions with sysfs_emit

show() must not use snprintf() when formatting the value to be returned
to user space.

Fix the following coccicheck warning:
  drivers/macintosh/ams/ams-core.c:53: WARNING: use scnprintf or sprintf.

Use sysfs_emit instead of scnprintf or sprintf makes more sense.

Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1634280544-4581-1-git-send-email-wangqing@vivo.com

Documentation: Fix typo in testing/sysfs-class-cxl

Remove repeated words: "the the lowest" and "this this kernel"

Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211006155017.135592-1-sohaib.amhmd@gmail.com

macintosh/smu: Fix warning comparing pointer to 0

Fix the following coccicheck warning:
  ./drivers/macintosh/smu.c:1089: 11-12:
   WARNING comparing pointer to 0, suggest !E
  ./drivers/macintosh/smu.c:1256:11-12:
  WARNING comparing pointer to 0

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210825061838.69746-1-deng.changcheng@zte.com.cn

powerpc: use strscpy to replace strlcpy

The strlcpy should not be used because it doesn't limit the source
length. As linus says, it's a completely useless function if you
can't implicitly trust the source string - but that is almost always
why people think they should use it! All in all the BSD function
will lead some potential bugs.

But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.

Thus, We prefer using strscpy instead of strlcpy.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210807072154.64512-1-wangborong@cdjrlc.com

powerpc/perf/24x7: use 'unsigned int' instead of 'unsigned'

Replace the 'unsigned' with 'unsigned int' which is more accurate.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
[chleroy: Fixed parenthesis alignment]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729115252.40895-1-wangborong@cdjrlc.com

powerpc/powernv: Switch from __FUNCTION__ to __func__

__FUNCTION__ exists only for backwards compatibility reasons with old
gcc versions. Replace it with __func__.

Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210711084837.95577-1-dwaipayanray1@gmail.com

powerpc/mm: Switch from __FUNCTION__ to __func__

__FUNCTION__ exists only for backwards compatibility reasons with old
gcc versions. Replace it with __func__.

Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
[chleroy: Fixed parenthesis alignment]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210711084536.95394-1-dwaipayanray1@gmail.com

powerpc: Fix spelling mistake "mesages" -> "messages" in Kconfig

There is a spelling mistake in the Kconfig text. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210704093846.36972-1-colin.king@canonical.com

powerpc/rtas: Replaced simple_strtoull() with kstrtoull()

The simple_strtoull() function is deprecated in some situation, since
it does not check for the range overflow, use kstrtoull() instead.

Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526092020.554341-1-chenhuang5@huawei.com

powerpc/mpc52xx: Fix some pr_debug() issues

Fix some pr_debug() issues in mpc52xx_pci.c:

- use __func__ to print function names
- use "%pr" to print struct resource entries
- use "%pa" to print a resource_size_t (phys_addr_t)

The latter two fix several build warnings:

  ../arch/powerpc/platforms/52xx/mpc52xx_pci.c: In function 'mpc52xx_pci_setup':
  ../include/linux/kern_levels.h:5:18: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
  ../arch/powerpc/platforms/52xx/mpc52xx_pci.c:277:40: note: format string is defined here
    277 |   pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n",
        |                                       ~^
        |                                        |
        |                                        unsigned int
        |                                       %llx
  ../include/linux/kern_levels.h:5:18: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
  ../arch/powerpc/platforms/52xx/mpc52xx_pci.c:277:49: note: format string is defined here
    277 |   pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n",
        |                                                ~^
        |                                                 |
        |                                                 unsigned int
        |                                                %llx

  ../arch/powerpc/platforms/52xx/mpc52xx_pci.c:299:36: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
    299 |    (unsigned long long)res->flags, (void*)hose->io_base_phys);
        |                                    ^
  ../arch/powerpc/platforms/52xx/mpc52xx_pci.c:295:2: note: in expansion of macro 'pr_debug'
    295 |  pr_debug(".io_resource={.start=%llx,.end=%llx,.flags=%llx} "
        |  ^~~~~~~~

The change to print mem_resource[0] is for consistency within this
source file and to use the kernel API -- there were no warnings here.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[chleroy: Fixed checkpatch complaints]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210429005323.8195-1-rdunlap@infradead.org

macintosh/via-pmu: Use DEFINE_SPINLOCK() for spinlock

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409095145.2294210-1-yebin10@huawei.com

powerpc/pmac: remove unused symbol

sccdbg symbol is not used, so remove it

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zucheng Zheng <zhengzucheng@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409093519.118000-1-zhengzucheng@huawei.com

powerpc: make 'boot_text_mapped' static

The sparse tool complains as follow:

arch/powerpc/kernel/btext.c:48:5: warning:
 symbol 'boot_text_mapped' was not declared. Should it be static?

This symbol is not used outside of btext.c, so this commit make
it static.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408011801.557004-3-yukuai3@huawei.com

powerpc: remove set but not used variable 'force_printk_to_btext'

Fixes gcc '-Wunused-but-set-variable' warning:

arch/powerpc/kernel/btext.c:49:12: error: 'force_printk_to_btext'
defined but not used.

It is never used, and so can be removed.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408011801.557004-2-yukuai3@huawei.com

powerpc/pseries/cmm: Remove unneeded variable "ret"

Remove unneeded variable: "ret".

Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Just return NOTIFY_OK directly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326075619.48-1-zuoqilin1@163.com

powerpc/eeh: Remove unused inline function eeh_dev_phb_init_dynamic()

commit 475028efc708 ("powerpc/eeh: Remove eeh_dev_phb_init_dynamic()")
left behind this, so can remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210324140714.19612-1-yuehaibing@huawei.com

powerpc/time: Fix sparse warnings

We found these warnings in arch/powerpc/kernel/time.c as follows:
  warning: symbol 'decrementer_max' was not declared. Should it be static?
  warning: symbol 'rtc_lock' was not declared. Should it be static?
  warning: symbol 'dtl_consumer' was not declared. Should it be static?

Declare 'decrementer_max' in powerpc asm/time.h.

Include linux/mc146818rtc.h in powerpc kernel/time.c where 'rtc_lock' is
declared. And remove duplicated declaration of 'rtc_lock' in powerpc
platforms/chrp/time.c because it has included linux/mc146818rtc.h.

Move 'dtl_consumer' definition after "include <asm/dtl.h>" because it is
declared there.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210324090939.143477-1-heying24@huawei.com

powerpc/sstep: Use bitwise instead of arithmetic operator for flags

Fix the following coccinelle warnings:
./arch/powerpc/lib/sstep.c:1090:20-21: WARNING: sum of probable
bitmasks, consider |
./arch/powerpc/lib/sstep.c:1115:20-21: WARNING: sum of probable
bitmasks, consider |
./arch/powerpc/lib/sstep.c:1134:20-21: WARNING: sum of probable
bitmasks, consider |

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1613811455-2457-1-git-send-email-yang.lee@linux.alibaba.com

powerpc/8xx: export 'cpm_setbrg' for modules

Fix missing export for a loadable module build:

ERROR: modpost: "cpm_setbrg" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined!

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
[chleroy: Changed Fixes: tag]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210122010819.30986-1-rdunlap@infradead.org

powerpc/perf: Fix symbol undeclared warning

Build kernel with `C=2`:
arch/powerpc/perf/isa207-common.c:24:18: warning: symbol
'isa207_pmu_format_attr' was not declared. Should it be static?
arch/powerpc/perf/power9-pmu.c:101:5: warning: symbol 'p9_dd21_bl_ev'
was not declared. Should it be static?
arch/powerpc/perf/power9-pmu.c:115:5: warning: symbol 'p9_dd22_bl_ev'
was not declared. Should it be static?

Those symbols are used only in the files that define them so we declare
them as static to fix the warnings.

Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200923071453.2540-1-wangwensheng4@huawei.com

powerpc/pseries/dlpar: Remove unnecessary cast to kfree()

Remove unnecassary cast in the argument to kfree().

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200708072228.30776-1-vulab@iscas.ac.cn

macintosh: Use kmemdup rather than duplicating its implementation

kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
[chleroy: Fixed parenthesis alignment]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190703162821.32322-1-huangfq.daxian@gmail.com

selftests/powerpc: Add a test of 4PB SLB handling

Add a test for a bug we had in the 4PB address space SLB handling. It
was fixed in commit 4c2de74cc869 ("powerpc/64: Interrupts save PPR on
stack rather than thread_struct").

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220317143925.1030447-1-mpe@ellerman.id.au

powerpc/85xx: Fix virt_to_phys() off-by-one in smp_85xx_start_cpu()

In smp_85xx_start_cpu() we are passed an address but we're unsure if
it's a real or virtual address, so there's a check to determine that.

The check has an off-by-one in that it tests if the address is greater
than high_memory, but high_memory is the first address of high memory,
so the check should be greater-or-equal.

It seems this has never been a problem in practice, but it also triggers
the DEBUG_VIRTUAL checks in __pa() which we would like to avoid. We can
fix both issues by converting high_memory - 1 to a physical address and
testing against that.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406145802.538416-3-mpe@ellerman.id.au

selftests/powerpc: Add matrix multiply assist (MMA) test

Adds a simple test of some basic matrix multiply assist (MMA)
instructions.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200622021832.15870-1-alistair@popple.id.au

powerpc/boot: Build wrapper for an appropriate CPU

Currently the boot wrapper lacks a -mcpu option, so it will be built for
the toolchain's default cpu. This is a problem if the toolchain defaults
to a cpu with newer instructions.

We could wire in TARGET_CPU but instead use the oldest supported option
so the wrapper runs anywhere.

The GCC documentation stays that -mcpu=powerpc64le will give us a
generic 64 bit powerpc machine:

 -mcpu=powerpc, -mcpu=powerpc64, and -mcpu=powerpc64le specify pure
 32-bit PowerPC (either endian), 64-bit big endian PowerPC and 64-bit
 little endian PowerPC architecture machine types, with an appropriate,
 generic processor model assumed for scheduling purposes.

So do that for each of the three machines.

This bug was found when building the kernel with a toolchain that
defaulted to powre10, resulting in a pcrel enabled wrapper which fails
to link:

 arch/powerpc/boot/wrapper.a(crt0.o): in function `p_base':
 (.text+0x150): call to `platform_init' lacks nop, can't restore toc; (toc save/adjust stub)
 (.text+0x154): call to `start' lacks nop, can't restore toc; (toc save/adjust stub)
 powerpc64le-buildroot-linux-gnu-ld: final link failed: bad value

Even with tha bug worked around the resulting kernel would crash on a
power9 box:

 $ qemu-system-ppc64 -nographic -nodefaults -M powernv9 -kernel arch/powerpc/boot/zImage.epapr -serial mon:stdio
 [    7.069331356,5] INIT: Starting kernel at 0x20010020, fdt at 0x3068c628 25694 bytes
 [    7.130374661,3] ***********************************************
 [    7.131072886,3] Fatal Exception 0xe40 at 00000000200101e4    MSR 9000000000000001
 [    7.131290613,3] CFAR : 000000002001027c MSR  : 9000000000000001
 [    7.131433759,3] SRR0 : 0000000020010050 SRR1 : 9000000000000001
 [    7.131577775,3] HSRR0: 00000000200101e4 HSRR1: 9000000000000001
 [    7.131733687,3] DSISR: 00000000         DAR  : 0000000000000000
 [    7.131905162,3] LR   : 0000000020010280 CTR  : 0000000000000000
 [    7.132068356,3] CR   : 44002004         XER  : 00000000

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/linuxppc/issues/issues/400
Link: https://lore.kernel.org/r/20220330112437.540214-1-joel@jms.id.au

powerpc/fadump: print start of preserved area

Print preserved area start address in fadump_region_show() function.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406093839.206608-4-hbathini@linux.ibm.com

powerpc/fadump: align destination address to pagesize

On crash, boot memory area is copied to a destination address by f/w.
This region is setup as separate PT_LOAD segment with appropriate
offset to handle the different physical address and offset in vmcore.
If this destination address is not page aligned, reading the vmcore
with mmap is likely to fail forcing tools like makedumpfile to fall
back to regular read. Avoid mmap read failure by ensuring that the
destination address is always page aligned.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406093839.206608-3-hbathini@linux.ibm.com

powerpc/fadump: fix PT_LOAD segment for boot memory area

Boot memory area is setup as separate PT_LOAD segment in the vmcore
as it is moved by f/w, on crash, to a destination address provided by
the kernel. Having separate PT_LOAD segment helps in handling the
different physical address and offset for boot memory area in the
vmcore.

Commit ced1bf52f477 ("powerpc/fadump: merge adjacent memory ranges to
reduce PT_LOAD segements") inadvertly broke this pre-condition for
cases where some of the first kernel memory is available adjacent to
boot memory area. This scenario is rare but possible when memory for
fadump could not be reserved adjacent to boot memory area owing to
memory hole or such. Reading memory from a vmcore exported in such
scenario provides incorrect data.  Fix it by ensuring no other region
is folded into boot memory area.

Fixes: ced1bf52f477 ("powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements")
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406093839.206608-2-hbathini@linux.ibm.com

powerpc/fadump: save CPU reg data in vmcore when PHYP terminates LPAR

An LPAR can be terminated by the POWER Hypervisor (PHYP) for various
reasons. If FADump was configured when PHYP terminates the LPAR,
platform-assisted dump is initiated to save the kernel dump. But CPU
register data would not be processed/saved in the vmcore in such case
because CPU mask is set in crash_fadump() at the time of kernel crash
and it remains unset in this case with LPAR being terminated by PHYP
abruptly.

To get around the problem, initialize cpu_mask to cpu_possible_mask
so as to ensure all possible CPUs' register data is processed for the
vmcore generated on PHYP terminated LPAR. Also, rename the crash info
member variable from online_mask to cpu_mask as it doesn't necessarily
have to be online CPU mask always.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220404182137.59231-1-hbathini@linux.ibm.com

powerpc/fadump: Fix fadump to work with a different endian capture kernel

Dump capture would fail if capture kernel is not of the endianess as the
production kernel, because the in-memory data structure (struct
opal_fadump_mem_struct) shared across production kernel and capture
kernel assumes the same endianess for both the kernels, which doesn't
have to be true always. Fix it by having a well-defined endianess for
struct opal_fadump_mem_struct.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161902744901.86147.14719228311655123526.stgit@hbathini

selftests/powerpc/pmu: Fix unsigned function returning negative constant

The function __perf_reg_mask has an unsigned return type, but returns a
negative constant to indicate an error condition. So we change unsigned
to int.

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1650788802-14402-1-git-send-email-baihaowen@meizu.com

powerpc/boot: remove unused function find_node_by_linuxphandle()

The last user of find_node_by_linuxphandle() was removed in v4.18-rc1
by commit 30f4bbe0472a ("powerpc/boot: Remove support for Marvell MPSC serial controller")
four years ago.  This function is no longer needed.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220424184014.968274-1-frowand.list@gmail.com

Linux 5.18-rc4

Merge tag 'sched_urgent_for_v5.18_rc4' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Borislav Petkov:

 - Fix a corner case when calculating sched runqueue variables

That fix also removes a check for a zero divisor in the code, without
mentioning it.  Vincent clarified that it's ok after I whined about it:

  https://lore.kernel.org/all/CAKfTPtD2QEyZ6ADd5WrwETMOX0XOwJGnVddt7VHgfURdqgOS-Q@mail.gmail.com/

* tag 'sched_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/pelt: Fix attach_entity_load_avg() corner case

Merge tag 'powerpc-5.18-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Partly revert a change to our timer_interrupt() that caused lockups
   with high res timers disabled.

 - Fix a bug in KVM TCE handling that could corrupt kernel memory.

 - Two commits fixing Power9/Power10 perf alternative event selection.

Thanks to Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic
Barrat, Madhavan Srinivasan, Miguel Ojeda, and Nicholas Piggin.

* tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf: Fix 32bit compile
  powerpc/perf: Fix power10 event alternatives
  powerpc/perf: Fix power9 event alternatives
  KVM: PPC: Fix TCE handling for VFIO
  powerpc/time: Always set decrementer in timer_interrupt()

Merge tag 'perf_urgent_for_v5.18_rc4' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

 - Add Sapphire Rapids CPU support

 - Fix a perf vmalloc-ed buffer mapping error (PERF_USE_VMALLOC in use)

* tag 'perf_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/cstate: Add SAPPHIRERAPIDS_X CPU support
  perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled

Merge tag 'edac_urgent_for_v5.18_rc4' of git://git./linux/kernel/git/ras/ras

Pull EDAC fix from Borislav Petkov:

 - Read the reported error count from the proper register on
   synopsys_edac

* tag 'edac_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/synopsys: Read the error count from the correct register

kvmalloc: use vmalloc_huge for vmalloc allocations

Since commit 559089e0a93d ("vmalloc: replace VM_NO_HUGE_VMAP with
VM_ALLOW_HUGE_VMAP"), the use of hugepage mappings for vmalloc is an
opt-in strategy, because it caused a number of problems that weren't
noticed until x86 enabled it too.

One of the issues was fixed by Nick Piggin in commit 3b8000ae185c
("mm/vmalloc: huge vmalloc backing pages should be split rather than
compound"), but I'm still worried about page protection issues, and
VM_FLUSH_RESET_PERMS in particular.

However, like the hash table allocation case (commit f2edd118d02d:
"page_alloc: use vmalloc_huge for large system hash"), the use of
kvmalloc() should be safe from any such games, since the returned
pointer might be a SLUB allocation, and as such no user should
reasonably be using it in any odd ways.

We also know that the allocations are fairly large, since it falls back
to the vmalloc case only when a kmalloc() fails.  So using a hugepage
mapping seems both safe and relevant.

This patch does show a weakness in the opt-in strategy: since the opt-in
flag is in the 'vm_flags', not the usual gfp_t allocation flags, very
few of the usual interfaces actually expose it.

That's not much of an issue in this case that already used one of the
fairly specialized low-level vmalloc interfaces for the allocation, but
for a lot of other vmalloc() users that might want to opt in, it's going
to be very inconvenient.

We'll either have to fix any compatibility problems, or expose it in the
gfp flags (__GFP_COMP would have made a lot of sense) to allow normal
vmalloc() users to use hugepage mappings.  That said, the cases that
really matter were probably already taken care of by the hash tabel
allocation.

Link: https://lore.kernel.org/all/20220415164413.2727220-1-song@kernel.org/
Link: https://lore.kernel.org/all/CAHk-=whao=iosX1s5Z4SF-ZGa-ebAukJoAdUJFk5SPwnofV+Vg@mail.gmail.com/
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page_alloc: use vmalloc_huge for large system hash

Use vmalloc_huge() in alloc_large_system_hash() so that large system
hash (>= PMD_SIZE) could benefit from huge pages.

Note that vmalloc_huge only allocates huge pages for systems with
HAVE_ARCH_HUGE_VMALLOC.

Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd

Pull ksmbd server fixes from Steve French:

 - cap maximum sector size reported to avoid mount problems

 - reference count fix

 - fix filename rename race

* tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION
  ksmbd: increment reference count of parent fp
  ksmbd: remove filename in ksmbd_file

Merge tag 'arc-5.18-rc4' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

 - Assorted fixes

* tag 'arc-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: remove redundant READ_ONCE() in cmpxchg loop
  ARC: atomic: cleanup atomic-llsc definitions
  arc: drop definitions of pgd_index() and pgd_offset{, _k}() entirely
  ARC: dts: align SPI NOR node name with dtschema
  ARC: Remove a redundant memset()
  ARC: fix typos in comments
  ARC: entry: fix syscall_trace_exit argument

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
 "One fix for an information leak caused by copying a buffer to
  userspace without checking for error first in the sr driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sr: Do not leak information in ioctl

Merge tag 'for-linus-5.18-rc4-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
 "A simple cleanup patch and a refcount fix for Xen on Arm"

* tag 'for-linus-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: Fix some refcount leaks
  xen: Convert kmap() to kmap_local_page()

Merge tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm

Pull more drm fixes from Dave Airlie:
 "Maarten was away, so Maxine stepped up and sent me the drm-fixes
  merge, so no point leaving it for another week.

  The big change is an OF revert around bridge/panels, it may have some
  driver fallout, but hopefully this revert gets them shook out in the
  next week easier.

  Otherwise it's a bunch of locking/refcounts across drivers, a radeon
  dma_resv logic fix and some raspberry pi panel fixes.

  panel:
   - revert of patch that broke panel/bridge issues

  dma-buf:
   - remove unused header file.

  amdgpu:
   - partial revert of locking change

  radeon:
   - fix dma_resv logic inversion

  panel:
   - pi touchscreen panel init fixes

  vc4:
   - build fix
   - runtime pm refcount fix

  vmwgfx:
   - refcounting fix"

* tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: partial revert "remove ctx->lock" v2
  Revert "drm: of: Lookup if child node has panel or bridge"
  Revert "drm: of: Properly try all possible cases for bridge/panel detection"
  drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
  drm/vmwgfx: Fix gem refcounting and memory evictions
  drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m
  drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
  drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
  dma-buf-map: remove renamed header file
  drm/radeon: fix logic inversion in radeon_sync_resv

Merge tag 'input-for-v5.18-rc3' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - a new set of keycodes to be used by marine navigation systems

 - minor fixes to omap4-keypad and cypress-sf drivers

* tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add Marine Navigation Keycodes
  Input: omap4-keypad - fix pm_runtime_get_sync() error checking
  Input: cypress-sf - register a callback to disable the regulators