Heiko Schocher [Sun, 1 Dec 2019 10:23:32 +0000 (11:23 +0100)]
imx6: aristainetos: add support for rev C board
add support for revision C boards. This board has
no longer a NAND.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:31 +0000 (11:23 +0100)]
imx6: aristainetos: add aristainetos 2b csl
add aristainetso board version CSL.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:30 +0000 (11:23 +0100)]
imx6: aristainetos: readd aristainetos 2b board
readd aristainetos 2b board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:29 +0000 (11:23 +0100)]
imx6: aristainetos: enable HAB boot
enable IMX_HAB on aristianetos board
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:28 +0000 (11:23 +0100)]
imx6: aristainetos: cleanup default Environment
sync defaut Envoronment with customer changes.
Unfortunately they are not changeable, as already
board is in production mode.
Get rid of the big bootcommand and set bootcommand
through Kconfig option.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:27 +0000 (11:23 +0100)]
imx6: aristainetos: WDT DM conversion enable WDT reset
enable config symbols:
CONFIG_SYSRESET
CONFIG_SYSRESET_WATCHDOG
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:26 +0000 (11:23 +0100)]
imx6: aristainetos: cleanup bootmode settings
on the aristainetos there are some jumpers for
changing behaviour setting up Environment. Clean
this up.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:25 +0000 (11:23 +0100)]
imx6: aristainetos: add version variable
add VERSION_VARIABLE
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:24 +0000 (11:23 +0100)]
imx6: aristainetos: add AUTOBOOT_KEYED
add stop autobooting via SHA256 encrypted password.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:23 +0000 (11:23 +0100)]
imx6: aristainetos: add i2c eeprom support
add support for i2c eeprom and add parsing "Rescue"
or "DefEnv" at offset 0x1ff0.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:22 +0000 (11:23 +0100)]
imx6: aristainetos: get rid of CONFIG_BOARDNAME
CONFIG_BOARDNAME is not longer needed, as we use
the model information from DTS.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:21 +0000 (11:23 +0100)]
imx6: aristainetos: convert to DM_PWM/DM_BACKLIGHT
use DM_PWM and DM_BLACKLIGHT support and remove
board code.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:20 +0000 (11:23 +0100)]
imx6: aristainetos: add DM_I2C support
enable DM_I2C in defconfig and remove i2c specific
board code.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:19 +0000 (11:23 +0100)]
imx6: aristainetos: add DM_VIDEO support
add DM_VIDEO support and remove now unneeded board
code. As we show a bmp logo on boot, call now
bmp_display() from board code and do not use
cfb_console anymore.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:18 +0000 (11:23 +0100)]
imx6: aristainetos: enable DM_ETH
enable DM_ETH and remove unneeded board code.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:17 +0000 (11:23 +0100)]
imx6: aristainetos: convert CONFIG_DM_SPI
enable CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH
and get rid of build removal warnings.
define CONFIG_GPIO_ENABLE_SPI_FLASH is not longer
needed, so remove it from config_whitelist.txt
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:16 +0000 (11:23 +0100)]
imx6: aristainetos: convert to DM_USB
Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB
in defconfig.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:15 +0000 (11:23 +0100)]
imx6: aristainetos: convert gpio pins to DM and DTS
Enable DM_GPIO, GPIO_HOG, LED and LED_GPIO as gpio
and LEDs are now defined in DTS. Enable also here
the pinctrl driver, so pinmux setup is also done.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:14 +0000 (11:23 +0100)]
imx6: aristainetos: convert to DM_MMC
Enable DM_MMC support.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:13 +0000 (11:23 +0100)]
imx6: aristainetos: add DM_SERIAL support
add DM_SERIAL support for the aristainetos board, and
remove not used code from board code.
remove CONSOLE_OVERWRITE_ROUTINE.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:12 +0000 (11:23 +0100)]
imx6: aristainetos: prepare dts for other board versions
as we switch to support DM and DTS, rework the existing
DTS trees. Change also Linux specific Device trees, goal
is to push this changes to linux.
Collect U-Boot specific changes in separate "*u-boot*" dts
files.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:11 +0000 (11:23 +0100)]
imx6: aristainetos: remove aristainetos-v2.c
remove aristainetos-v2.c file, as we now want to
switch to DM/DTS support and have all board specific
code in one file. Goal is to setup differences
through DT.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:10 +0000 (11:23 +0100)]
imx6: aristainetos: add thumb build
add thumb build to aristainetos build to save
binary space.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:09 +0000 (11:23 +0100)]
imx6: aristainetos: add device tree from linux
Add device trees from Linux in preparation for driver model
conversions.
device tree files taken from Linux:
71ae5fc87c34: "Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest"
and added SPDX license identifier.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:08 +0000 (11:23 +0100)]
imx6: aristainetos: disable gigabit support
gigabit support does not work on the aristainetos
board, so disable it.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:07 +0000 (11:23 +0100)]
imx6: aristainetos: remove 2b version
remove 2b version of aristainetos board, as it
is easier to make the DM / DTS port and introduce
the 2b board version again (also some more board
version).
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:06 +0000 (11:23 +0100)]
imx6: aristainetos: move defines to Kconfig
move defines, which are already moved to Kconfig
out of board config.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:05 +0000 (11:23 +0100)]
video: lg4573: convert to DM
convert this driver to support DM.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:04 +0000 (11:23 +0100)]
imx6: remove aristainetos board
remove not anymore used aristainetos board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Tom Rini [Mon, 6 Jan 2020 20:56:31 +0000 (15:56 -0500)]
Prepare v2020.01
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 3 Jan 2020 17:00:04 +0000 (12:00 -0500)]
Revert "mmc: davinci: drop struct davinci_mmc_plat"
Adam Ford reports that this change breaks booting on da850-evm and
Bartosz Golaszewski agrees that with the impending release we should
revert the change for now. With that noted:
This reverts commit
21a4d80a710c79053ac1deaa65ff9b69e6c031d4.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 3 Jan 2020 14:47:22 +0000 (09:47 -0500)]
Merge branch '2020-01-03-master-imports'
- Fixes for host tools with musl C library
- Two fixes for TI K3 platforms
Lokesh Vutla [Tue, 31 Dec 2019 10:19:55 +0000 (15:49 +0530)]
arm: mach-k3: Enable WA for R5F deadlock
On K3 devices there are 2 conditions where R5F can deadlock:
1.When software is performing series of store operations to
cacheable write back/write allocate memory region and later
on software execute barrier operation (DSB or DMB). R5F may
hang at the barrier instruction.
2.When software is performing a mix of load and store operations
within a tight loop and store operations are all writing to
cacheable write back/write allocates memory regions, R5F may
hang at one of the load instruction.
To avoid the above two conditions disable linefill optimization
inside Cortex R5F which will make R5F to only issue up to 2 cache
line fills at any point of time.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Lokesh Vutla [Tue, 31 Dec 2019 10:18:48 +0000 (15:48 +0530)]
arm: dts: k3-j721e: ddr: Update to 0.2 version of DDR config tool
Update the ddr settings to use the DDR reg config tool rev 0.2.0.
This reduces the aging count(in DDRSS_CTL_274_DATA reg) to 15 in-order
to avoid DSS underflow errors.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Kevin Scholz <k-scholz@ti.com>
Sergei Trofimovich [Mon, 30 Dec 2019 15:53:42 +0000 (15:53 +0000)]
include/u-boot/crc.h: pull 'uint' definition on musl targets
The build failure was originally reported on arm64-musl
target at https://bugs.gentoo.org/703132. Here is the amd64-musl
variant:
```
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc)
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc)
...
include/u-boot/crc.h:37:44: error: unknown type name 'uint'; did you mean 'int'?
37 | void crc16_ccitt_wd_buf(const uint8_t *in, uint len,
| ^~~~
| int
```
Note: 'uint' is not defined there.
On glibc 'uint' comes from <sys/types.h> and happens to work on most .c files.
The change imports 'uint' declaration from '<compiler.h>'.
Bug: https://bugs.gentoo.org/703132
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Sergei Trofimovich [Mon, 30 Dec 2019 15:53:41 +0000 (15:53 +0000)]
include: fix 'ulong' definition on musl targets
The build failure was originally reported on arm64-musl
target at https://bugs.gentoo.org/703132. Here is the amd64-musl
variant:
```
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc)
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc)
...
In file included from tools/env/../../env/flags.c:7,
from tools/env/env_flags.c:1:
include/env.h:159:1: error: unknown type name 'ulong'; did you mean 'long'?
159 | ulong env_get_ulong(const char *name, int base, ulong default_val);
| ^~~~~
| long
```
Note: 'ulong' is not defined there.
On glibc 'ulong' comes from <sys/types.h>:
```c
/* Old compatibility names for C types. */
typedef unsigned long int ulong;
```
On musl it comes from <sys/types.h> as well but from under different guards:
```c
typedef unsigned long u_long, ulong;
```
The change inlines 'ulong' define similar to 'uint' define.
Bug: https://bugs.gentoo.org/703132
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Tom Rini [Thu, 2 Jan 2020 23:12:05 +0000 (18:12 -0500)]
Merge tag 'fixes-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-video
- fix missing graphics output on some x86 boards
- avoid using #ifdef in video code
- add .gitignore for video font *.S files
Dario Binacchi [Tue, 31 Dec 2019 17:09:14 +0000 (18:09 +0100)]
video: add wrappers for ttf type files to .gitignore
The scripts/Makefile.lib generates an assembler file (*.S) to wrap the
font data for each file of type ttf defined in Kconfig.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Tom Rini [Thu, 2 Jan 2020 15:28:26 +0000 (10:28 -0500)]
Merge tag 'u-boot-rockchip-
20191231' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix latest mainline kernel for rk3308
- Update rk3288-evb config to suport OP-TEE
- Fix for firefly-px30 DEBUG_UART channel and make it standalone
- Script make_fit_atf add python3 support
- Fix rk3328 timer with correct COUNTER_FREQUENCY
- Fix rk3328 ATF support with enable spl-fifo-mode
Tom Rini [Thu, 2 Jan 2020 15:27:47 +0000 (10:27 -0500)]
Merge branch '2020-01-02-master-imports'
- Assorted test.py fixes
- Other minor changes
Simon Glass [Fri, 27 Dec 2019 14:46:30 +0000 (07:46 -0700)]
test: Fix the boardspec for the SPL handoff test
This test currently does not run because it specifies the sandbox board
instead of sandbox_spl. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Igor Opaniuk [Tue, 17 Dec 2019 12:48:54 +0000 (14:48 +0200)]
mailmap: Update mail address for Igor Opaniuk
My address at Linaro doesn't exist anymore, so people
keep getting mail delivery error responses. Map this address
to the actual one.
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Stephen Warren [Wed, 18 Dec 2019 18:37:21 +0000 (11:37 -0700)]
test_env: don't strip() printenv results
get_env() was originally written to strip() the output of printenv to
isolate the test from any whitespace changes in printenv's output.
However, this throws away any whitespace in the variable value, which can
cause issues when test code expects to see that whitespace. In fact,
printenv never adds any whitespace at all, so there's no need to strip.
The strip causes a practical problem for test_env_echo_exists() if
state_test_env.get_existent_var() happens to choose a U-Boot variable that
contains trailing whitespace. This is true for variable boot_targets.
With Python 2, get_existent_var() never returned boot_targets so this
issue never caused a practical problem.
With Python 3, get_existent_var does sometimes return boot_targets, no
doubt due to Python 3's different dict hash key order implementation,
about 0.5-2% of the time, so this test appears intermittent. With the
strip removed, this intermittency is solved, since the test passes for all
possible U-Boot variables.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Robert P. J. Day [Wed, 25 Dec 2019 11:34:07 +0000 (06:34 -0500)]
arch/arm/Kconfig: typo/grammar/punctuation fixes
Various (mostly minor) spelling, grammar and punctuation tweaks for
arch/arm/Kconfig.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Dario Binacchi [Sun, 29 Dec 2019 12:47:32 +0000 (13:47 +0100)]
.gitignore: ignore files generated by asn1 compiler
As described in doc/README.asn1 document the tools/asn1_compiler is used
to "generate bytecode as a C file (*.asn1.[ch]) from *.asn1 file".
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Sun, 29 Dec 2019 12:44:18 +0000 (13:44 +0100)]
tools: .gitignore: add asn1_compiler
Add the tool to the ignore list to prevent being marked as unversioned.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sat, 21 Dec 2019 01:10:37 +0000 (18:10 -0700)]
video: Avoid using #ifdef in video-uclass.c
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.
Change the #ifdefs to use IS_ENABLED(), etc., instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 21 Dec 2019 01:10:36 +0000 (18:10 -0700)]
video: Avoid using #ifdef in vidconsole-uclass.c
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.
Change the #ifdefs to use CONFIG_IS_ENABLED() instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 21 Dec 2019 01:10:35 +0000 (18:10 -0700)]
video: Avoid using #ifdef in console_rotate.c
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.
Change the #ifdefs to use IS_ENABLED() instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 21 Dec 2019 01:10:34 +0000 (18:10 -0700)]
video: Avoid using #ifdef in video blitting code
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.
Change the #ifdefs to use IS_ENABLED() instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 21 Dec 2019 01:10:33 +0000 (18:10 -0700)]
video: x86: Enable 32-bit graphics by default
Most x86 boards that use video make use of 32bpp graphics. Enable this by
default. This fixes missing graphics output on some x86 boards.
Also remove the unnecessary 'default n' while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Kever Yang [Tue, 31 Dec 2019 08:02:59 +0000 (16:02 +0800)]
rockchip: evb-rk3328: Enable support ATF in SPL
Enable the ATF in SPL and adjust the SPL STACK/HEAD at the same time to
support ATF entry at 0x40000.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Tue, 31 Dec 2019 07:57:55 +0000 (15:57 +0800)]
rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmc
Since mmc to sram can't do dma, add patch to prevent aborts transfering
TF-A parts.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Tue, 31 Dec 2019 07:17:56 +0000 (15:17 +0800)]
rockchip: rk3328: add COUNTER_FREQUENCY definition
The arch timer needs COUNTER_FREQUENCY to get correct counter, add it to
make the timer works correct.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tom Rini [Sat, 28 Dec 2019 13:07:16 +0000 (08:07 -0500)]
Merge tag 'u-boot-imx-
20191228' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
Fixes for 2020.01
-----------------
- Fixes for Nitrogen6x
- Fix corruption for mx51evk
- colibri i.MX6: fix broken ESDHC conversion
- mx6sxsabresd: fix broken mmcdev
- imx6q_logic: cleanup boot sequence
- update ATF for imx8mq_evk
- pfuze: fix pmic_get()
Travis CI: https://travis-ci.org/sbabic/u-boot-imx/builds/
630007464
Tom Rini [Fri, 27 Dec 2019 21:46:38 +0000 (16:46 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- Orange Pi Zero Plus 2 support
- sunxi psci, prcm fixes
Tom Rini [Fri, 27 Dec 2019 21:46:15 +0000 (16:46 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- rk spi transfer limit fix
- Gigadevice, gd25q128 support
- spi-nor-core warnings
Patrik Dahlström [Sat, 21 Dec 2019 16:18:22 +0000 (17:18 +0100)]
omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
The omap3_beagle NAND ECC scheme was changed in
4b37928d357 for unknown
reasons, leading to uncorrectible ecc errors. This commit changes it
back to what it was before.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Robert Beckett [Tue, 29 Oct 2019 19:07:03 +0000 (19:07 +0000)]
rtc: rx8010js: add compatible string
Add compatible string used by Linux.
Allows for simpler syncing of device trees.
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Robert Beckett [Mon, 28 Oct 2019 19:10:10 +0000 (19:10 +0000)]
rtc: s35392a: add compatible strings
Add compatible strings used by Linux.
Allows for simpler syncing of device trees.
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Robert Beckett [Mon, 28 Oct 2019 18:49:15 +0000 (18:49 +0000)]
rtc: rx8010sj: fix DM initialization
pass the udevice by reference instead of double ref
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Adam Ford [Sun, 3 Nov 2019 13:58:40 +0000 (07:58 -0600)]
ARM: imx6q_logic: Cleanup boot sequence check
The board_boot_order() function currenly assumes that the boot source
is MMC/eMMC, but this isn't true for the NAND devices.
This patch cleans up board_boot_order() to check for NAND, SD, ESD,
MMC or EMMC. Anything beyond these are not supported, so it will
default back to the serial downloader if any of those devices are not
available.
Fixes:
9fb50c68daa6 ("ARM: imx6q_logic: Fix MMC2 booting")
Signed-off-by: Adam Ford <aford173@gmail.com>
Troy Kisky [Mon, 4 Nov 2019 02:20:05 +0000 (18:20 -0800)]
ARM: i.MX6: TARGET_NITROGEN6X: add 'select MX6QDL'
This fixes commit <
91435cd40d30> "ARM: i.MX6: exclude the ARM errata
from i.MX6 UP system"
for nitrogen6x. The above commit removed the errata for the board
since MX6Q/MXDL/MX6S is selected via CONFIG_SYS_EXTRA_OPTIONS
This restores the errata configs.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Troy Kisky [Mon, 4 Nov 2019 02:20:04 +0000 (18:20 -0800)]
nitrogen6x: prepare for CONFIG_MX6QDL
The next patch adds CONFIG_MX6QDL so that
errata will be enabled again.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Jagan Teki [Sat, 21 Dec 2019 07:54:30 +0000 (13:24 +0530)]
spi: rk: Limit transfers to (64K - 1) bytes
The Rockchip SPI controller's length register only supports 16-bits,
yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
1"). Trying to transfer more than that (e.g., with a large SPI flash
read) will cause the driver to hang.
Now, it seems that while theoretically we should be able to program
CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to
cause the core to choke, so stick with a maximum of 64K - 1 bytes --
i.e., 0xffff.
Note, that the size is further divided into 'minus 1' while writing
into CTRLR1.
This change fixed two different read issues,
1. sf read failure when with > 0x10000
2. Boot from SPI flash failed during spi_flash_read call in
common/spl/spl_spi.c
Observed and Tested in
- Rockpro64 with Gigadevice flash
- ROC-RK3399-PC with Winbond flash
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Vignesh Raghavendra [Sat, 9 Nov 2019 06:34:13 +0000 (12:04 +0530)]
mtd: spi-nor-core: Fix static checker warnings
Static checker warns 'ret' variable may be used uninitialized in
spi_nor_erase() and spi_nor_write() in case of zero length requests.
Fix these warnings by checking for zero length requests and returning
early.
Reported-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Jorge Ramirez-Ortiz [Wed, 11 Dec 2019 09:42:36 +0000 (10:42 +0100)]
tools/imximage: share DCD information via Kconfig
IMX based platforms can have the DCD table located on different
addresses due to differences in their memory maps (ie iMX7ULP).
This information is required by the user to sign the images for secure
boot so continue making it accessible via mkimage.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Wed, 11 Dec 2019 13:49:30 +0000 (10:49 -0300)]
imx8mq_evk: Update the required ATF branch
Following the README instructions leads to a non-booting
U-Boot:
U-Boot SPL 2020.01-rc3-00070-g9a0cbae22a (Nov 25 2019 - 13:08:24 -0300)
PMIC: PFUZE100 ID=0x10
DDRINFO: start DRAM init
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Trying to boot from MMC2
(It hangs here)
Use the "imx_4.19.35_1.0.0" ATF branch instead, which
fixes such problem and allow the boot to complete again.
Suggested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Fabio Estevam [Wed, 11 Dec 2019 17:31:03 +0000 (14:31 -0300)]
imx8m_evk: Remove unneeded earlycon string
Passing earlycon string in the command line may be
useful during bring up, but not after such phase.
Remove the earlycon string to align with the other i.MX SoCs
command lines.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Wed, 11 Dec 2019 20:37:09 +0000 (17:37 -0300)]
imx8m: ddr_init: Move ddr_init() messages to debug level
Currently inside ddr_init() there is a mix of printf() and debug()
level messages.
Since this type of information is useful for debug purposes,
convert all of them to debug level for consistency.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Fabio Estevam [Thu, 19 Dec 2019 16:52:39 +0000 (13:52 -0300)]
mx51evk: Fix U-Boot corruption after saving the environment
U-Boot binary has grown in such a way that it goes beyond the reserved
area for the environment variables.
Running "saveenv" followed by a "reset" causes U-Boot to hang because
of this overlap.
Fix this problem by increasing the CONFIG_ENV_OFFSET size.
Also, in order to prevent this same problem to happen in the future,
use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.
CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare
CONFIG_ENV_OFFSET with its direct value instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Thu, 19 Dec 2019 17:59:42 +0000 (14:59 -0300)]
mx6sxsabresd: Adjust the mmcdev after DM conversion
After the DM conversion the boot SD card is now device 3.
Adjust it so that we can boot the kernel again.
While at it avoid a hardcoded mmc dev inside the finduuid script.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Thu, 19 Dec 2019 17:59:41 +0000 (14:59 -0300)]
pfuze: Fix the pmic_get() parameter in the DM case
Currently the following hang is observed when booting a imx6sx-sdb
board:
U-Boot 2020.01-rc5-00004-g643366bcd5 (Dec 19 2019 - 14:56:23 -0300)
CPU: Freescale i.MX6SX rev1.0 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 32C
Reset cause: POR
Model: Freescale i.MX6 SoloX SDB RevB Board
Board: MX6SX SABRE SDB revA
DRAM: 1 GiB
initcall sequence
bffd8514 failed at call
87804cc0 (err=-19)
### ERROR ### Please RESET the board ###
When pmic_get() is used with DM the first parameter must be
the complete node name plus the unit address.
Fix the pmic_get() parameter to fix the boot regression.
Tested on a imx6sx-sdb and imx6q-sabresd boards.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Igor Opaniuk [Fri, 6 Dec 2019 16:24:16 +0000 (18:24 +0200)]
colibri_imx6: fix broken fsl_esdhc_imx conversion
Not all CONFIG_FSL_ESDHC defines were properly replaced with
CONFIG_FSL_ESDHC_IMX, which broke U-boot proper booting on
Colibri iMX6 SoMs.
U-boot is stuck after this message:
Commercial temperature grade DDR3 timings, 64bit bus width.
Trying to boot from MMC1
Fixes:
e37ac717d7("Convert to use fsl_esdhc_imx for i.MX platforms")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Jeffy Chen [Thu, 5 Dec 2019 10:58:29 +0000 (18:58 +0800)]
rockchip: mkimage: fix wrong range of rc4 encoding for boot image
The rc4 encoding should cover spl header as well, and the file_size
contains spl header too.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jeffy Chen [Thu, 5 Dec 2019 10:58:28 +0000 (18:58 +0800)]
doc: rockchip: document packing second level loader with mkimage
Add documentation about packing optional second level boot-loader with
mkimage tool.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jeffy Chen [Fri, 27 Dec 2019 03:24:41 +0000 (11:24 +0800)]
rockchip: mkimage: support packing optional second level boot-loader
Support packing optional second level boot-loader:
$ ./tools/mkimage -n rk3399 -T rksd -d \
rk3399_ddr_800MHz_v1.24.bin:rk3399_miniloader_v1.19.bin out -v
Adding Image rk3399_ddr_800MHz_v1.24.bin
Size 116492(pad to 116736)
Adding Image rk3399_miniloader_v1.19.bin
Size 88060(pad to 88064)
Image Type: Rockchip RK33 (SD/MMC) boot image
Init Data Size: 116736 bytes
Boot Data Size: 88064 bytes
Mainly parse init file and boot file from datafile option, copy them to
the image with 2KB alignment.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Andy Yan [Thu, 26 Dec 2019 07:20:34 +0000 (15:20 +0800)]
doc: rockchip: Fix reference the wrong defconfig name of ROC-CC-RK3308
The defconfig file for ROC-CC-RK3308 is roc-cc-rk3308_defconfig.
Fixes:
7f08bfb74f04 ("doc: rockchip: Add documentation for rk3308 based
boards")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Andy Yan [Thu, 26 Dec 2019 07:20:04 +0000 (15:20 +0800)]
rockchip: rk3308: allow loading larger kernel Image
When compile the curren mainline linux kernel(Linux 5.5-rc3)
with defconfig, the final Image is 29M, it's much
larger than Linux 5.4.
On the current u-boot side on rk3308, the gap between
kernel and fdt is 25M, the fdt will overwrite kernel
Image, so move ftd to a higher memory to give 34M
gab for them.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thomas Hebb [Sat, 21 Dec 2019 02:05:22 +0000 (18:05 -0800)]
rockchip: add description for TPL_ROCKCHIP_COMMON_BOARD
SPL_ROCKCHIP_COMMON_BOARD, an almost identical option, has a title but
this one doesn't for some reason. Add a description to make the menu
easier to read.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Fri, 13 Dec 2019 09:41:17 +0000 (17:41 +0800)]
rockchip: px30-firefly add standalone dts
Firefly Core-PX30-JD4 use UART2M1 while PX30 evb using UART2M0, the U-Boot
proper will use the dts setting to do the IOMUX init, and a separate dts
is needed for px30-firefly.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Fri, 13 Dec 2019 02:48:51 +0000 (10:48 +0800)]
rockchip: firefly-px30: Fix the MACRO for CONFIG_DEBUG_UART2_CHANNEL
The Macro has update without update the defconfig, update the defconfig
to make Mcaro correct.
Fixes:
ec4fafdf1f ("rockchip: px30: Rename CONFIG_DEBUG_UART2_CHANNEL to...")
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Jack Mitchell [Tue, 10 Dec 2019 13:07:21 +0000 (13:07 +0000)]
rockchip: make_fit_atf: explicitly use python3
On a distribution with no python2 installed and no
python->python3 symlink the script will fail to execute.
Specify python3 explicitly as it's already a requirement
to build u-boot.
Signed-off-by: Jack Mitchell <ml@embed.me.uk>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tom Rini [Thu, 26 Dec 2019 14:07:08 +0000 (09:07 -0500)]
Merge branch '2019-12-26-ti-imports'
- Update maintainer on omapl138_lcdk
- Match TRM sequence & settings in the TI pipe3 PHY
Lokesh Vutla [Fri, 20 Dec 2019 06:05:20 +0000 (11:35 +0530)]
board: davinci: Update OMAPL138_LCDK maintainer
As per the email discussion[0], add myself as a maintainer to
OMAPL138_LCDK and drop Peter's entry.
[0] http://u-boot.10912.n7.nabble.com/OMAP-L138-LCDK-giving-up-maintainership-td394211.html
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Roger Quadros [Wed, 6 Nov 2019 14:21:18 +0000 (16:21 +0200)]
phy: ti-pipe3: Fix SATA & USB PHY power up sequence
As per "Table 26-7. SATA PHY Subsystem Low-Level Programming Sequence"
in TRM [1] we need to turn on SATA_PHY_TX before SATA_PHY_RX.
[1] DRA75x, DRA74x TRM - http://www.ti.com/lit/ug/sprui30f/sprui30f.pdf
Signed-off-by: Roger Quadros <rogerq@ti.com>
Roger Quadros [Wed, 6 Nov 2019 14:21:17 +0000 (16:21 +0200)]
phy: ti-pipe3: improve DPLL stability for SATA & USB
For increased DPLL stability use the settings recommended in
the TRM [1] for PHY_RX registers for SATA and USB.
For SATA we need to use spread spectrum settings even
though we don't have spread spectrum enabled. The
suggested non-spread spectrum settings don't work.
[1] DRA75x, DRA74x TRM - http://www.ti.com/lit/ug/sprui30f/sprui30f.pdf
Signed-off-by: Roger Quadros <rogerq@ti.com>
Roger Quadros [Wed, 6 Nov 2019 14:21:16 +0000 (16:21 +0200)]
phy: ti-pipe3: Introduce mode property in driver data
Introduce a mode property in the driver data so that
we don't have to keep using "of_device_is_compatible()"
throughtout the driver.
No functional change.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Roger Quadros [Wed, 6 Nov 2019 14:21:15 +0000 (16:21 +0200)]
phy: ti-pipe3: Use TRM recommended settings for SATA DPLL
The AM572x Technical Reference Manual, SPRUHZ6H,
Revised November 2016 [1], shows recommended settings for the
SATA DPLL in Table 26-8. DPLL CLKDCOLDO Recommended Settings.
Use those settings in the driver. The TRM does not show
a value for 20MHz SYS_CLK so we use something close to the
26MHz setting.
[1] - http://www.ti.com/lit/ug/spruhz6h/spruhz6h.pdf
Signed-off-by: Roger Quadros <rogerq@ti.com>
Kever Yang [Thu, 5 Dec 2019 10:11:55 +0000 (18:11 +0800)]
rockchip: rk3288-evb: update config to support OPTEE
Upstream kernel and rockchip kernel has default enable PSCI which needs
OPTEE in trust word, enable OPTEE support for evb by default and SPL_FIT
option to pack OPTEE with U-Boot proper.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Thu, 5 Dec 2019 10:11:54 +0000 (18:11 +0800)]
rockchip: rk3288-evb: update CONFIG_NR_DRAM_BANKS to 2
The OPTEE will use the ram start at 0x8400000 which make the DRAM be two
banks.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Thu, 5 Dec 2019 10:11:53 +0000 (18:11 +0800)]
rockchip: rk3288-evb: update SPL_STACK/MALLOC_LEN config with rk3399
Update the SPL_STACK_R_MALLOC_SIMPLE_LEN which also including space for
STACK and the size may not enough when loding FIT image in SPL.
If the size is not enough, you can see log like this when loding FIT:
U-Boot TPL 2020.01-rc3-00082-g4b19b89ca4-dirty (Dec 05 2019 - 11:52:53)
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.01-rc3-00082-g4b19b89ca4-dirty (Dec 05 2019 - 11:52:53 +0800)
Trying to boot from MMC2
And if enable the DEBUG for everyting in SPL, the log will hang at dwmmc
sending CMD16 for 'uboot' loadables binary because this step need a
large stack cost(about 0x2d00).
External data: dst=8400000, offset=72638, size=b3580
Image OS is Trusted Execution Environment
board_fit_config_name_match: rk3288-evb
Selecting config 'rk3288-evb'loadables: 'uboot'
blk_find_device: if_type=6, devnum=1: dwmmc@
ff0c0000.blk, 6, 0
blk_find_device: if_type=6, devnum=1: dwmmc@
ff0f0000.blk, 6, 1
Sending CMD16
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Thu, 5 Dec 2019 10:11:52 +0000 (18:11 +0800)]
rockchip: fit_spl_optee: get text and optee base from build
Instead of hardcode the base address, we can get them from the build
output, eg. get the SYS_TEXT_BASE from .config and get optee base from
DRAM_BASE.
We can use this script for SoCs with DRAM base not from 0x60000000(rk3229
and many other 32bit Rockchip SoCs), eg. rk3288 DRAM base is 0.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tom Rini [Sun, 22 Dec 2019 14:14:35 +0000 (09:14 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
- dwc3 and cdns3 bug fixes
Tom Rini [Sun, 22 Dec 2019 14:13:50 +0000 (09:13 -0500)]
Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-net
- Fix phy_connect() call in two drivers
- fw_setenv bugfix
Jagan Teki [Wed, 18 Dec 2019 07:30:02 +0000 (13:00 +0530)]
usb: dwc3: Fix UTMI/UTMIW phy interface initialization
DWC3 support phy interfaces like 8/16-bit UTMI+. phy interface
initialization code would handle them properly along with UNKNOWN
type by default if none of the user/board doesn't need to use the
phy interfaces at all.
The current code is masking the 8/16-bit UTMI+ interface bits globally
which indeed effect the UNKNOWN cases, therefore it effects the platforms
which are not using phy interfaces at all.
So, handle the phy masking bits accordingly on respective interface
type cases.
Fixes:
6b7ebff00190 ("usb: dwc3: Add phy interface for dwc3_uboot")
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Heinrich Schuchardt [Tue, 17 Dec 2019 09:37:19 +0000 (10:37 +0100)]
MAINTAINERS: assign usb.c and and usb_kbd.c
Marek is already maintaining USB. Assign files common/usb.c and
common/usb_kbd.c to him.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Vignesh Raghavendra [Thu, 5 Dec 2019 07:59:25 +0000 (13:29 +0530)]
usb: cdns3: ep0: Fix build warnings related to cache ops
Since, commit
62f9b6544728 ("common: Move older CPU functions to their own header")
cache ops functions are declared in a separate header. Include the same
to avoid build warnings.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Rasmus Villemoes [Thu, 27 Sep 2018 20:45:26 +0000 (22:45 +0200)]
fw_setenv: avoid writing environment when nothing has changed
In the case where one deletes an already-non-existing variable, or sets
a variable to the value it already has, there is no point in writing the
environment back, thus reducing wear on the underlying storage
device.
In the case of redundant environments, if the two environments
differ (e.g. because one is corrupt), make sure that any call of
fw_setenv causes the two to become synchronized, even if the fw_setenv
call does not change anything in the good copy.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Alex Marginean [Thu, 19 Dec 2019 12:35:37 +0000 (14:35 +0200)]
drivers: net: bcm-sf2: pass -1 to phy_connect()
Passing 0 to PHY connect used to trigger a MDIO scan due to a bug fixed in
the meantime. It's unclear if bcm-sf2 wants to connect to PHY @ addr 0 or
is scanning the bus, passing -1 here should keep it functional either way.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Cc: Jiandong Zheng <jdzheng@broadcom.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>