scsi: qla2xxx: edif: Reject AUTH ELS on session down

Reject inflight AUTH ELS if driver is going through session recovery.

Link: https://lore.kernel.org/r/20210817051315.2477-3-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: edif: Fix stale session

When firmware indicates session has been torn down via UPDATE SA IOCB or
ELS Passthrough IOCB, the driver needs to also tear down the session.

Link: https://lore.kernel.org/r/20210817051315.2477-2-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd: Do not exit sd_spinup_disk() quietly

The sd_spinup_disk() function logs what is happening. Unfortunately this
output stops if the media was marked as removed in the meantime. Add a
print for this case too.

Link: https://lore.kernel.org/r/CWXP265MB26803209FD08A64222EEEA02C4FD9@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COM
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Do not wait for initial device scan

The initial device scan might take some time, and there really is no need
to wait for it during probe().  So return immediately from scsi_scan_host()
during probe() and avoid any udev stalls during booting.

Link: https://lore.kernel.org/r/20210817075306.11315-1-mwilck@suse.com
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Fix sense key for invalid EXTENDED COPY request

TCM fails to pass the following tests in libiscsi:

  SCSI.ExtendedCopy.DescrType
  SCSI.ExtendedCopy.DescrLimits
  SCSI.ExtendedCopy.ParamHdr
  SCSI.ExtendedCopy.ValidSegDescr
  SCSI.ExtendedCopy.ValidTgtDescr

The xcopy code always returns the same NOT READY sense key for all detected
errors. Change the sense key for invalid requests to ILLEGAL REQUEST, and
for aborted transfers to COPY ABORTED.

Link: https://lore.kernel.org/r/20210803145410.80147-3-s.samoylenko@yadro.com
Fixes: d877d7275be3 ("target: Fix a deadlock between the XCOPY code and iSCSI session shutdown")
Reviewed-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Allows backend drivers to fail with specific sense codes

Currently, backend drivers can fail I/O with SAM_STAT_CHECK_CONDITION which
gets us TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE.

Add a new helper that allows backend drivers to fail with specific sense
codes.

This is based on a patch from Mike Christie <michael.christie@oracle.com>.

Cc: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20210803145410.80147-2-s.samoylenko@yadro.com
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Replace one-element array with flexible-array member

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members"[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Refactor the code a bit according to the use of a flexible-array member in
struct pqi_event_config instead of a one-element array, and use the
struct_size() helper.

This helps with the ongoing efforts to globally enable -Warray-bounds and
get us closer to being able to tighten the FORTIFY_SOURCE routines on
memcpy().

This issue was found with the help of Coccinelle and audited and fixed,
manually.

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/r/20210810210741.GA58765@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: pscsi: Fix possible null-pointer dereference in pscsi_complete_cmd()

The return value of transport_kmap_data_sg() is assigned to the variable
buf:

  buf = transport_kmap_data_sg(cmd);

And then it is checked:

  if (!buf) {

This indicates that buf can be NULL. However, it is dereferenced in the
following statements:

  if (!(buf[3] & 0x80))
    buf[3] |= 0x80;
  if (!(buf[2] & 0x80))
    buf[2] |= 0x80;

To fix these possible null-pointer dereferences, dereference buf and call
transport_kunmap_data_sg() only when buf is not NULL.

Link: https://lore.kernel.org/r/20210810040414.248167-1-islituo@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove scsi_cmnd.tag

It is never read, so get rid of it.

Link: https://lore.kernel.org/r/1628862553-179450-4-git-send-email-john.garry@huawei.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Stop using scsi_cmnd.tag

Use scsi_cmd_to_rq(scsi_cmnd)->tag in preference to scsi_cmnd.tag.

Link: https://lore.kernel.org/r/1629207817-211936-1-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Stop setting scsi_cmnd.tag

It is never read. Setting it and the request tag seems dodgy anyway.

Link: https://lore.kernel.org/r/1628862553-179450-3-git-send-email-john.garry@huawei.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: wd719: Stop using scsi_cmnd.tag

Use scsi_cmd_to_rq(cmd)->tag instead.

Link: https://lore.kernel.org/r/1628862553-179450-2-git-send-email-john.garry@huawei.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Fix error codes in qedf_alloc_global_queues()

This driver has some left over "return 1" on failure style code mixed with
"return negative error codes" style code.  The caller doesn't care so we
should just convert everything to return negative error codes.

Then there was a problem that there were two variables used to store error
codes which just resulted in confusion.  If qedf_alloc_bdq() returned a
negative error code, we accidentally returned success instead of
propagating the error code.  So get rid of the "rc" variable and use
"status" every where.

Also remove the "status = 0" initialization so that these sorts of bugs
will be detected by the compiler in the future.

Link: https://lore.kernel.org/r/20210810085023.GA23998@kili
Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Fix error codes in qedi_alloc_global_queues()

This function had some left over code that returned 1 on error instead
negative error codes.  Convert everything to use negative error codes.  The
caller treats all non-zero returns the same so this does not affect run
time.

A couple places set "rc" instead of "status" so those error paths ended up
returning success by mistake.  Get rid of the "rc" variable and use
"status" everywhere.

Remove the bogus "status = 0" initialization, as a future proofing measure
so the compiler will warn about uninitialized error codes.

Link: https://lore.kernel.org/r/20210810084753.GD23810@kili
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Fix an error code in pqi_get_raid_map()

Return -EINVAL on failure instead of success.

Link: https://lore.kernel.org/r/20210810084613.GB23810@kili
Fixes: a91aaae0243b ("scsi: smartpqi: allow for larger raid maps")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Use the proper SCSI midlayer interfaces for PI

Use the SCSI midlayer interfaces to query protection interval, reference
tag, and per-command DIX flags

Link: https://lore.kernel.org/r/20210806040023.5355-4-martin.petersen@oracle.com
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Update version to 10.02.06.100-k

Link: https://lore.kernel.org/r/20210810043720.1137-15-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Sync queue idx with queue_pair_map idx

The first invocation of function find_first_zero_bit will return 0 and
queue_id gets set to 0.

An index of queue_pair_map also gets set to 0.

qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs);

        set_bit(qpair_id, ha->qpair_qid_map);
        ha->queue_pair_map[qpair_id] = qpair;

In the alloc_queue callback driver checks the map, if queue is already
allocated:

ha->queue_pair_map[qidx]

This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8)
since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus
is less than 8, max_qpairs is less than 8. This creates wrong value
returned as qpair.

[ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2
[ 1572.354458] general protection fault: 0000 [#1] SMP PTI
[ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G          IOE    --------- -  - 4.18.0-304.el8.x86_64 #1
[ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013
[ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn
[ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx]
[ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 <f0> 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0
[ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246
[ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001
[ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800
[ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800
[ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000
[ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000
[ 1572.354494] FS:  0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000
[ 1572.354495] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0
[ 1572.354497] Call Trace:
[ 1572.354503]  ? check_preempt_curr+0x62/0x90
[ 1572.354506]  ? dma_direct_map_sg+0x72/0x1f0
[ 1572.354509]  ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc]
[ 1572.354511]  ? blk_mq_dispatch_rq_list+0x11c/0x730
[ 1572.354515]  ? __switch_to_asm+0x35/0x70
[ 1572.354516]  ? __switch_to_asm+0x41/0x70
[ 1572.354518]  ? __switch_to_asm+0x35/0x70
[ 1572.354519]  ? __switch_to_asm+0x41/0x70
[ 1572.354521]  ? __switch_to_asm+0x35/0x70
[ 1572.354522]  ? __switch_to_asm+0x41/0x70
[ 1572.354523]  ? __switch_to_asm+0x35/0x70
[ 1572.354525]  ? entry_SYSCALL_64_after_hwframe+0xb9/0xca
[ 1572.354527]  ? __switch_to_asm+0x41/0x70
[ 1572.354529]  ? __blk_mq_sched_dispatch_requests+0xc6/0x170
[ 1572.354531]  ? blk_mq_sched_dispatch_requests+0x30/0x60
[ 1572.354532]  ? __blk_mq_run_hw_queue+0x51/0xd0
[ 1572.354535]  ? process_one_work+0x1a7/0x360
[ 1572.354537]  ? create_worker+0x1a0/0x1a0
[ 1572.354538]  ? worker_thread+0x30/0x390
[ 1572.354540]  ? create_worker+0x1a0/0x1a0
[ 1572.354541]  ? kthread+0x116/0x130
[ 1572.354543]  ? kthread_flush_work_fn+0x10/0x10
[ 1572.354545]  ? ret_from_fork+0x35/0x40

Fix is to use index 0 for admin and first IO queue.

Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Changes to support kdump kernel for NVMe BFS

The MSI-X and MSI calls fails in kdump kernel. Because of this
qla2xxx_create_qpair() fails leading to .create_queue callback failure.
The fix is to return existing qpair instead of allocating new one and
allocate a single hw queue.

[   19.975838] qla2xxx [0000:d8:00.1]-00c7:11: MSI-X: Failed to enable support,
giving   up -- 16/-28.
[   19.984885] qla2xxx [0000:d8:00.1]-0037:11: Falling back-to MSI mode --
ret=-28.
[   19.992278] qla2xxx [0000:d8:00.1]-0039:11: Falling back-to INTa mode --
ret=-28.
..
..
..
[   21.141518] qla2xxx [0000:d8:00.0]-2104:2: qla_nvme_alloc_queue: handle
00000000e7ee499d, idx =1, qsize 32
[   21.151166] qla2xxx [0000:d8:00.0]-0181:2: FW/Driver is not multi-queue capable.
[   21.158558] qla2xxx [0000:d8:00.0]-2122:2: Failed to allocate qpair
[   21.164824] nvme nvme0: NVME-FC{0}: reset: Reconnect attempt failed (-22)
[   21.171612] nvme nvme0: NVME-FC{0}: Reconnect attempt in 2 seconds

Link: https://lore.kernel.org/r/20210810043720.1137-13-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Changes to support kdump kernel

Avoid allocating firmware dump and only allocate a single queue for a kexec
kernel.

Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Suppress unnecessary log messages during login

Suppress logging of retryable errors. These can still be seen if extended
logging is enabled.

Link: https://lore.kernel.org/r/20210810043720.1137-11-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix NPIV create erroneous error

When user creates multiple NPIVs, the switch capabilities field is checked
before a vport is allowed to be created. This field is being toggled if a
switch scan is in progress. This creates erroneous reject of vport create.

Link: https://lore.kernel.org/r/20210810043720.1137-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix unsafe removal from linked list

On NPIV delete, the VPort is taken off a linked list in an unsafe manner.
The check for VPort refcount should be done behind lock before taking off
the element.

[ 2733.016907] general protection fault: 0000 [#1] SMP NOPTI
[ 2733.016908] qla2xxx [0000:22:00.1]-7088:27: VP[4] deleted.
[ 2733.016912] CPU: 22 PID: 23481 Comm: qla2xxx_15_dpc Kdump: loaded Tainted:
G           OE KX    5.3.18-47-default #1 SLE15-SP3
[ 2733.016914] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.1.4 02/17/2021
[ 2733.016929] RIP: 0010:qla2x00_abort_isp+0x90/0x850 [qla2xxx]
[ 2733.016933] RSP: 0018:ffffb9cfc91efe98 EFLAGS: 00010087
[ 2733.016935] RAX: 0000000000000292 RBX: dead000000000100 RCX: 0000000000000000
[ 2733.016936] RDX: 0000000000000001 RSI: ffff944bfeb99558 RDI: ffff944bfc4b4488
[ 2733.016937] RBP: ffff944bfc4b2868 R08: 00000000000187a2 R09: 0000000000000001
[ 2733.016937] R10: ffffb9cfc91efcc8 R11: 0000000000000001 R12: ffff944bfc4b4000
[ 2733.016938] R13: ffff944bfc4b4870 R14: ffff944bfc4b4488 R15: ffff944bda895c80
[ 2733.016939] FS:  0000000000000000(0000) GS:ffff944bfeb80000(0000) knlGS:0000000000000000
[ 2733.016940] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2733.016940] CR2: 00007fc173e74458 CR3: 0000001ff57de000 CR4: 0000000000350ee0
[ 2733.016941] Call Trace:
[ 2733.016951]   qla2xxx_pci_error_detected+0x190/0x190 [qla2xxx]
[ 2733.016957]   qla2x00_do_dpc+0x560/0xa10 [qla2xxx]
[ 2733.016962]   kthread+0x10d/0x130
[ 2733.016963]   kthread_park+0xa0/0xa0
[ 2733.016966]   ret_from_fork+0x22/0x40

Link: https://lore.kernel.org/r/20210810043720.1137-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix port type info

Over time, fcport->port_type became a flag field. The flags within this
field were not defined properly. This caused external tools to read wrong
info.

Link: https://lore.kernel.org/r/20210810043720.1137-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add debug print of 64G link speed

Add debug print of 64G link speed.

Link: https://lore.kernel.org/r/20210810043720.1137-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Show OS name and version in FDMI-1

To be consistent with other OS drivers, register OS name and version in
FDMI-1 fabric registration.

Link: https://lore.kernel.org/r/20210810043720.1137-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Changes to support FCP2 Target

Add changes to support FCP2 Target.

Link: https://lore.kernel.org/r/20210810043720.1137-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Adjust request/response queue size for 28xx

Adjust request/respond queue size for 28xx to match 27xx adapter.

Link: https://lore.kernel.org/r/20210810043720.1137-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add host attribute to trigger MPI hang

Add a mechanism to trigger MPI pause for debugging purposes.

Link: https://lore.kernel.org/r/20210810043720.1137-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Add support for fastpath doorbell recovery

Driver fastpath employs doorbells to indicate to the device that work is
available. Each doorbell translates to a message sent to the device over
PCI. These messages are queued by the doorbell queue HW block, and handled
by the HW.

If a sufficient amount of CPU cores are sending messages at a sufficient
rate, the queue can overflow, and messages can be dropped. There are many
entities in the driver which can send doorbell messages.  When overflow
happens, a fatal HW attention is indicated, and the Doorbell HW block stops
accepting new doorbell messages until recovery procedure is done.

When overflow occurs, all doorbells are dropped. Since doorbells are
aggregatives, if more doorbells are sent nothing has to be done.  But if
the "last" doorbell is dropped, the doorbelling entity doesn’t know this
happened, and may wait forever for the device to perform the action.  The
doorbell recovery mechanism addresses just that - it sends the last
doorbell of every entity.

[mkp: fix missing brackets reported by Guenter Roeck]

Link: https://lore.kernel.org/r/20210804221412.5048-1-smalin@marvell.com
Co-developed-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Merge branch '5.14/scsi-fixes' into 5.15/scsi-staging

Resolve mpt3sas conflict between 5.14/scsi-fixes and 5.15/scsi-staging
reported by sfr.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: isci: Use the proper SCSI midlayer interfaces for PI

Use scsi_prot_ref_tag() instead of scsi_get_lba() to get the reference tag
for a given I/O.

Link: https://lore.kernel.org/r/20210806040023.5355-3-martin.petersen@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Add helper to return number of logical blocks in a request

Link: https://lore.kernel.org/r/20210806040023.5355-2-martin.petersen@oracle.com
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove the request member from struct scsi_cmnd

Since all scsi_cmnd.request users are gone, remove the request pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20210809230355.8186-53-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufshpb: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: storvsc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: usb-storage: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-52-bvanassche@acm.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: tcm_loop: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-51-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: xen-scsifront: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-50-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: virtio_scsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-49-bvanassche@acm.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-48-bvanassche@acm.org
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sym53c8xx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-47-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sun3_scsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-46-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: stex: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-45-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: snic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-44-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-43-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_debug: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-42-bvanassche@acm.org
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qlogicpti: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-41-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-40-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-39-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla1280: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. Remove the unused CMD_REQUEST() macro. This patch does not change
any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-38-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-37-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-36-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ncr53c8xx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-35-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: myrs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-34-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: myrb: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-33-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mvumi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-32-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-31-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-30-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-29-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-28-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-27-bvanassche@acm.org
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ips: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-26-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvscsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-25-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-24-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-23-bvanassche@acm.org
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-22-bvanassche@acm.org
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-21-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: dpt_i2o: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-20-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-19-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-18-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2i: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-17-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aha1542: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-16-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-15-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-14-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: NCR5380: Use sc_data_direction instead of rq_data_dir()

This patch prepares for the removal of the request pointer from struct
scsi_cmnd and does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-13-bvanassche@acm.org
Cc: Michael Schmitz <schmitzmic@gmail.com>
Suggested-by: Finn Thain <fthain@linux-m68k.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: 53c700: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-12-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: zfcp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-11-bvanassche@acm.org
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: RDMA/srp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-10-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: RDMA/iser: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-9-bvanassche@acm.org
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ata: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-8-bvanassche@acm.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_transport_spi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-7-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_transport_fc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-6-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-5-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-4-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. Cast away constness where necessary when passing a SCSI command
pointer to scsi_cmd_to_rq(). This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-3-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Introduce the scsi_cmd_to_rq() function

The 'request' member of struct scsi_cmnd is superfluous. The struct request
and struct scsi_cmnd data structures are adjacent and hence the request
pointer can be derived easily from a scsi_cmnd pointer. Introduce a helper
function that performs that conversion in a type-safe way. This patch is
the first step towards removing the request member from struct
scsi_cmnd. Making that change has the following advantages:

 - This is a performance optimization since adding an offset to a pointer
   takes less time than dereferencing a pointer.

 - struct scsi_cmnd becomes smaller.

Link: https://lore.kernel.org/r/20210809230355.8186-2-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufshpb: Do not report victim error in HCM

In host control mode, eviction is perceived as an extreme measure. There
are several conditions that both the entering and exiting regions should
meet, so that eviction will take place.

The common case however, is that those conditions are rarely met, so it is
normal that the act of eviction fails.  Therefore, do not report an error
in host control mode if eviction fails.

Link: https://lore.kernel.org/r/20210808090024.21721-5-avri.altman@wdc.com
Fixes: 6c59cb501b86 (scsi: ufs: ufshpb: Make eviction depend on region's reads)
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufshpb: Verify that 'num_inflight_map_req' is non-negative

'num_inflight_map_req' should not be negative.  It is incremented and
decremented without any protection, allowing it theoretically to be
negative, should some weird unbalanced count occur.

Verify that the those calls are properly serialized.

Link: https://lore.kernel.org/r/20210808090024.21721-4-avri.altman@wdc.com
Fixes: 33845a2d844b (scsi: ufs: ufshpb: Limit the number of in-flight map requests)
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufshpb: Use a correct max multi chunk

In HPB2.0, if pre_req_min_tr_len < transfer_len < pre_req_max_tr_len, the
driver is expected to send a HPB-WRITE-BUFFER companion to HPB-READ.

The upper bound should fit into a single byte, regardless of bMAX_
DATA_SIZE_FOR_HPB_SINGLE_CMD which being an attribute (u32) can be
significantly larger.

To further illustrate the issue, consider the following scenario:

 - SCSI_DEFAULT_MAX_SECTORS is 1024 limiting the I/O chunks to 512KB

 - The OEM changes scsi_host_template .max_sectors to be 2048 which allows
   for 1MB requests: transfer_len = 256

 - pre_req_max_tr_len = HPB_MULTI_CHUNK_HIGH = 256

 - ufshpb_is_supported_chunk() returns true (256 <= 256)

 - WARN_ON_ONCE(256 > 256) doesn't warn

 - ufshpb_set_hpb_read_to_upiu() casts transfer_len to u8: transfer_len = 0

 - The command is failing with ILLEGAL REQUEST

Link: https://lore.kernel.org/r/20210808090024.21721-3-avri.altman@wdc.com
Fixes: 41d8a9333cc9 (scsi: ufs: ufshpb: Add HPB 2.0 support)
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufshpb: Rewind the read timeout on every read

The purpose of the "cold"-timer is not to hang-on to active regions with no
reads.  Therefore the read timeout should be rewound on every read, and not
just when the region is activated.

Link: https://lore.kernel.org/r/20210808090024.21721-2-avri.altman@wdc.com
Fixes: 13c044e91678 (scsi: ufs: ufshpb: Add "cold" regions timer)
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Remove redundant initialization of variable 'rv'

The variable 'rv' is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.

Link: https://lore.kernel.org/r/20210804143319.115340-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")

scsi: ufs: ufshpb: Remove redundant initialization of variable 'lba'

The variable 'lba' is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.

Link: https://lore.kernel.org/r/20210804133241.113509-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")

scsi: elx: efct: Remove redundant initialization of variable 'ret'

The variable 'ret' is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.

Link: https://lore.kernel.org/r/20210804132451.113086-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")

scsi: fdomain: Fix error return code in fdomain_probe()

If request_region() fails the return value is not set. Return -EBUSY on
error.

Link: https://lore.kernel.org/r/20210715032625.1395495-1-liwei391@huawei.com
Fixes: 8674a8aa2c39 ("scsi: fdomain: Add PCMCIA support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: snic: Remove redundant assignment to variable ret

The variable ret is being initialized with a value that is never read, the
assignment is redundant and can be removed.

Link: https://lore.kernel.org/r/20210806112313.12434-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")

scsi: ufshcd: Fix device links when BOOT WLUN fails to probe

Managed device links are deleted by device_del(). However it is possible to
add a device link to a consumer before device_add(), and then discovering
an error prevents the device from being used. In that case normally
references to the device would be dropped and the device would be deleted.
However the device link holds a reference to the device, so the device link
and device remain indefinitely (unless the supplier is deleted).

For UFSHCD, if a LUN fails to probe (e.g. absent BOOT WLUN), the device
will not have been registered but can still have a device link holding a
reference to the device. The unwanted device link will prevent runtime
suspend indefinitely.

Amend device link removal to accept removal of a link with an unregistered
consumer device (suggested by Rafael), and fix UFSHCD by explicitly
deleting the device link when SCSI destroys the SCSI device.

Link: https://lore.kernel.org/r/a1c9bac8-b560-b662-f0aa-58c7e000cbbd@intel.com
Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Fix unsigned int compared with less than zero

Variable 'tag' is currently an unsigned int and is being compared to less
than zero, this check is always false. Fix this by making 'tag' an int.

Link: https://lore.kernel.org/r/20210806144301.19864-1-colin.king@canonical.com
Fixes: 4728ab4a8e64 ("scsi: ufs: Remove ufshcd_valid_tag()")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Macro compares unsigned to 0")

scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute

Similarly to AHCI, introduce the device sysfs attribute
sas_ncq_prio_supported to advertise if a SATA device supports the NCQ
priority feature. Without this new attribute, the user can only discover if
a SATA device supports NCQ priority by trying to enable the feature use
with the sas_ncq_prio_enable sysfs device attribute, which fails when the
device does not support high prioity commands.

Link: https://lore.kernel.org/r/20210807041859.579409-11-damien.lemoal@wdc.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Update driver version to 39.100.00.00

Update driver version to 39.100.00.00.

Link: https://lore.kernel.org/r/20210809072639.21228-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>