John Snow [Wed, 1 Oct 2014 18:19:25 +0000 (14:19 -0400)]
blockdev: Allow overriding if_max_dev property
The if_max_devs table as in the past been an immutable
default that controls the mapping of index => (bus,unit)
for all boards and all HBAs for each interface type.
Since adding this mapping information to the HBA device
itself is currently unwieldly from the perspective of
retrieving this information at option parsing time
(e.g, within drive_new), we consider the alternative
of marking the if_max_devs table mutable so that
later configuration and initialization can adjust the
mapping at will, but only up until a drive is added,
at which point the mapping is finalized.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id:
1412187569-23452-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
John Snow [Wed, 1 Oct 2014 18:19:24 +0000 (14:19 -0400)]
blockdev: Orphaned drive search
When users use command line options like -hda, -cdrom,
or even -drive if=ide, it is up to the board initialization
routines to pick up these drives and create backing
devices for them.
Some boards, like Q35, have not been doing this.
However, there is no warning explaining why certain
drive specifications are just silently ignored,
so this function adds a check to print some warnings
to assist users in debugging these sorts of issues
in the future.
This patch will not warn about drives added with if_none,
for which it is not possible to tell in advance if
the omission of a backing device is an issue.
A warning in these cases is considered appropriate.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id:
1412187569-23452-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 30 Sep 2014 11:27:10 +0000 (13:27 +0200)]
qemu-iotests: Fix supported cache modes for 052
The requirement for this test case is really "no O_DIRECT", because the
temporary snapshot for BDRV_O_SNAPSHOT is created in /tmp, which often
is a tmpfs.
Commit
f210a83c ('qemu-iotests: Add _default_cache_mode and
_supported_cache_modes') turned the restriction into writethrough-only,
but that's not really necessary.
Allow to run the test for any non-O_DIRECT cache modes, and use the
global default of writeback if no cache mode is specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id:
1412076430-11623-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 30 Sep 2014 11:27:09 +0000 (13:27 +0200)]
make check-block: Use default cache modes
When qemu-iotests only gave a choice between cache=none and
cache=writethrough, we picked cache=none because it was the option that
would complete the test in finite time. Some tests could only work for
one of the two options and would be skipped with cache=none, but that
was an acceptable trade-off at the time.
Today, however, qemu-iotests is a bit more flexible than that and you
can specify any of the cache modes supported by qemu. The default is
writeback, like in qemu, which is fast and (unlike cache=none) compatible
with any host filesystem. Test cases that have specific requirements for
the cache mode can also specify a different default.
In order to get a fast test run that works everywhere and doesn't skip
tests that need a different cache mode, not specifying any cache mode
and instead relying on the default is the best we can do today.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id:
1412076430-11623-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Jun Li [Wed, 24 Sep 2014 05:45:27 +0000 (13:45 +0800)]
Modify qemu_opt_rename to realize renaming all items in opts
Add realization of rename all items in opts for qemu_opt_rename.
e.g:
When add bps twice in command line, need to rename all bps to
throttling.bps-total.
This patch solved following bug:
Bug 1145586 - qemu-kvm will give strange hint when add bps twice for a drive
ref:https://bugzilla.redhat.com/show_bug.cgi?id=1145586
[Resolved conflict with commit
5abbf0ee4d87c695deb1c3fca9bb994b93a3e3be
("block: Catch simultaneous usage of options and their aliases"). Check
for simultaneous use first, and then loop over all options.
--Stefan]
Signed-off-by: Jun Li <junmuzi@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1411537527-16715-1-git-send-email-junmuzi@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Tue, 23 Sep 2014 01:56:21 +0000 (09:56 +0800)]
vmdk: Fix integer overflow in offset calculation
This fixes the bug introduced by commit c6ac36e (vmdk: Optimize cluster
allocation).
$ ~/build/master/qemu-io /stor/vm/arch.vmdk -c 'write 2G 1k'
write failed: Invalid argument
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id:
1411437381-11234-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Mon, 29 Sep 2014 14:07:55 +0000 (16:07 +0200)]
block: Drop superfluous conditionals around qemu_opts_del()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1411999675-14533-1-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Richard W.M. Jones [Mon, 29 Sep 2014 08:06:22 +0000 (09:06 +0100)]
ssh: Don't crash if either host or path is not specified.
$ ./qemu-img create -f qcow2 overlay \
-b 'json: { "file.driver":"ssh",
"file.host":"localhost",
"file.host_key_check":"no" }'
qemu-img: qobject/qdict.c:193: qdict_get_obj: Assertion `obj != ((void *)0)' failed.
Aborted
A similar crash also happens if the file.host field is omitted.
https://bugzilla.redhat.com/show_bug.cgi?id=1147343
Bug found and reported by Jun Li.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Zhang Haoyu [Mon, 29 Sep 2014 08:38:02 +0000 (16:38 +0800)]
snapshot: fix referencing wrong variable in while loop in do_delvm
The while loop variabal is "bs1",
but "bs" is always passed to bdrv_snapshot_delete_by_id_or_name.
Broken in commit a89d89d, v1.7.0.
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Thu, 2 Oct 2014 14:01:48 +0000 (15:01 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-
20141002-1' into staging
input monitor patches: fix send-key release ordering
and new input-send-event command
# gpg: Signature made Thu 02 Oct 2014 09:10:44 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-input-
20141002-1:
add input-send-event command
input: fix send-key monitor command release event ordering
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 2 Oct 2014 12:23:56 +0000 (13:23 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-console-
20141002-1' into staging
pixman: fix qemu_default_pixman_format (32bpp non-native endian)
# gpg: Signature made Thu 02 Oct 2014 08:47:20 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-console-
20141002-1:
pixman: fix qemu_default_pixman_format (32bpp non-native endian)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 2 Oct 2014 11:28:50 +0000 (12:28 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-
20141002-1' into staging
vga: cleanups, prepare for endianness switching
# gpg: Signature made Thu 02 Oct 2014 08:10:49 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vga-
20141002-1:
vga: Add endian to vmstate
vga: Make fb endian a common state variable
vga: Rename vga_template.h to vga-helpers.h
vga: Remove some "should be done in BIOS" comments
cirrus: Remove non-32bpp cursor drawing
vga: Simplify vga_draw_blank() a bit
vga: Remove rgb_to_pixel indirection
vga: Separate LE and BE conversion functions
vga: Remove remainder of old conversion cruft
vga: Start cutting out non-32bpp conversion support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marcelo Tosatti [Tue, 30 Sep 2014 21:10:17 +0000 (18:10 -0300)]
add input-send-event command
Which allows specification of absolute/relative,
up/down and console parameters.
Suggested by Gerd Hoffman.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 26 Sep 2014 08:02:16 +0000 (10:02 +0200)]
input: fix send-key monitor command release event ordering
commit
2e377f1730d06deafb3e3ef6cf88792de4a6f4df changed the ordering
of the release events as side effect. Some guests are not happy with
that and don't recognise ctrl-alt-del any more. This patch restores
the old last-pressed first-released behavior.
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Maydell [Tue, 30 Sep 2014 15:45:34 +0000 (16:45 +0100)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
This update brings dataplane to virtio-scsi (NOT
yet 100% thread-safe, though, which makes it really, really
experimental. It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi. This
is a pretty important feature. Almost all the work here
was done by Fam Zheng.
I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.
This pull request is using the new subkey
4E6B09D7.
# gpg: Signature made Tue 30 Sep 2014 12:31:02 BST using RSA key ID
4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (39 commits)
block/iscsi: handle failure on malloc of the allocationmap
util: introduce bitmap_try_new
virtio-scsi: Handle TMF request cancellation asynchronously
scsi: Introduce scsi_req_cancel_async
scsi: Introduce scsi_req_cancel_complete
scsi: Drop SCSIReqOps.cancel_io
scsi: Unify request unref in scsi_req_cancel
scsi-generic: Handle canceled request in scsi_command_complete
scsi: Drop scsi_req_abort
virtio-scsi: Process ".iothread" property
virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling
virtio-scsi: Batched prepare for cmd reqs
virtio-scsi: Two stages processing of cmd request
virtio-scsi: Add migration state notifier for dataplane code
virtio-scsi: Hook up with dataplane
virtio-scsi-dataplane: Code to run virtio-scsi on iothread
virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq
virtio-scsi: Add 'iothread' property to virtio-scsi
virtio: add a wrapper for virtio-backend initialization
virtio-9p: fix virtio-9p child refcount in transports
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 30 Sep 2014 14:03:27 +0000 (15:03 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-audio-
20140930-1' into staging
ac97: register reset via qom
# gpg: Signature made Tue 30 Sep 2014 12:32:29 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-audio-
20140930-1:
ac97: register reset via qom
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 30 Sep 2014 12:09:39 +0000 (13:09 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio, misc bugfixes
A bunch of bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 29 Sep 2014 17:59:57 BST using RSA key ID
D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vl: Adjust the place of calling mlockall to speedup VM's startup
pc-dimm: Don't check dimm->node when there is non-NUMA config
pci-hotplug-old: avoid losing error message
Revert "virtio-pci: fix migration for pci bus master"
loader: g_realloc(p, 0) frees and returns NULL, simplify
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Benjamin Herrenschmidt [Mon, 23 Jun 2014 03:57:41 +0000 (13:57 +1000)]
vga: Add endian to vmstate
Include the endian state in the migration stream as an optional
subsection which we only include when the endian isn't the default,
thus enabling backward compatibility of the common case.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Changes by kraxel:
* Remove bochs dispi interface changes. We'll do that in
a different way to make sure we don't conflict with
possible future bochs dispi interface changes.
* keep live migration bits.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Sun, 6 Jul 2014 23:50:12 +0000 (09:50 +1000)]
vga: Make fb endian a common state variable
And initialize it based on target endian
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Mon, 23 Jun 2014 01:46:06 +0000 (11:46 +1000)]
vga: Rename vga_template.h to vga-helpers.h
It's no longer a template, we only instanciate the file once.
Keep it a #included file so the functions remain static.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Sun, 22 Jun 2014 08:28:05 +0000 (18:28 +1000)]
vga: Remove some "should be done in BIOS" comments
Not all platforms have a VGA BIOS, powerpc typically relies on
using the DISPI interface to initialize the card.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Sun, 22 Jun 2014 01:04:24 +0000 (11:04 +1000)]
cirrus: Remove non-32bpp cursor drawing
We only draw cursor on non-shared surfaces (so it seems...) and
these are always 32bpp
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Sun, 22 Jun 2014 01:03:49 +0000 (11:03 +1000)]
vga: Simplify vga_draw_blank() a bit
The test for surface_bits_per_pixel() isn't necessary anymore,
the 8bpp case never happens.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Sun, 22 Jun 2014 01:00:50 +0000 (11:00 +1000)]
vga: Remove rgb_to_pixel indirection
We always use rgb_to_pixel32 nowadays.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Sun, 6 Jul 2014 23:48:28 +0000 (09:48 +1000)]
vga: Separate LE and BE conversion functions
Provide different functions for converting from an LE vs a BE
framebuffer. We cannot rely on the simple cases always being
shared surfaces since cirrus will need to always shadow for
cursor emulation, so we need the full set of functions to
be able to later handle runtime switching.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>\
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Sat, 21 Jun 2014 05:51:52 +0000 (15:51 +1000)]
vga: Remove remainder of old conversion cruft
All the macros used to generate different versions of vga_template.h
are now unnecessary, take them all out and remove the _32 suffix from
most functions.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Sat, 21 Jun 2014 05:39:31 +0000 (15:39 +1000)]
vga: Start cutting out non-32bpp conversion support
Nowadays, we either share a surface with the host, or we create
a 32bpp ARGB console surface.
So we only need to draw/convert to 32bpp, enabling us to remove
all but one instance of vga_template.h inclusion (to be further
cleaned up), rgb_to_pixel_* etc...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Gerd Hoffmann [Mon, 15 Sep 2014 06:33:37 +0000 (08:33 +0200)]
pixman: fix qemu_default_pixman_format (32bpp non-native endian)
Bug breaks SDL display of bigendian guests on little endian hosts.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Reported-by: Valentin Manea <valentin.manea@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Lieven [Tue, 30 Sep 2014 07:09:12 +0000 (09:09 +0200)]
block/iscsi: handle failure on malloc of the allocationmap
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Tue, 30 Sep 2014 07:09:11 +0000 (09:09 +0200)]
util: introduce bitmap_try_new
regular bitmap_new simply aborts if the memory allocation fails.
bitmap_try_new returns NULL on failure and allows for proper
error handling.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Tue, 30 Sep 2014 03:40:23 +0000 (11:40 +0800)]
virtio-scsi: Handle TMF request cancellation asynchronously
For VIRTIO_SCSI_T_TMF_ABORT_TASK and VIRTIO_SCSI_T_TMF_ABORT_TASK_SET,
use scsi_req_cancel_async to start the cancellation.
Because each tmf command may cancel multiple requests, we need to use a
counter to track the number of remaining requests we still need to wait
for.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Sun, 28 Sep 2014 01:48:00 +0000 (09:48 +0800)]
scsi: Introduce scsi_req_cancel_async
Devices will call this function to start an asynchronous cancellation. The
bus->info->cancel will be called after the request is canceled.
Devices will probably need to track a separate TMF request that triggers this
cancellation, and wait until the cancellation is done before completing it. So
we store a notifier list in SCSIRequest and in scsi_req_cancel_complete we
notify them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Thu, 25 Sep 2014 02:20:47 +0000 (10:20 +0800)]
scsi: Introduce scsi_req_cancel_complete
Let the aio cb do the clean up and notification job after scsi_req_cancel, in
preparation for asynchronous cancellation.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Wed, 24 Sep 2014 08:27:55 +0000 (16:27 +0800)]
scsi: Drop SCSIReqOps.cancel_io
The only two implementations are identical to each other, with nothing specific
to device: they only call bdrv_aio_cancel with the SCSIRequest.aiocb.
Let's move it to scsi-bus.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Wed, 24 Sep 2014 08:27:54 +0000 (16:27 +0800)]
scsi: Unify request unref in scsi_req_cancel
Before, scsi_req_cancel will take ownership of the canceled request and unref
it. We did this because we didn't know whether AIO CB will be called or not
during the cancelling, so we set the io_canceled flag before calling it, and
skip unref in the potentially called callbacks, which is not very nice.
Now, bdrv_aio_cancel has a stricter contract that the completion callbacks are
always called, so we can remove the checks of req->io_canceled and just unref
it in callbacks.
It will also make implementing asynchronous cancellation easier.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Wed, 24 Sep 2014 08:27:53 +0000 (16:27 +0800)]
scsi-generic: Handle canceled request in scsi_command_complete
Now that we always called the cb in bdrv_aio_cancel, let's make scsi-generic
callbacks check io_canceled flag similarly to scsi-disk.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Wed, 24 Sep 2014 08:27:52 +0000 (16:27 +0800)]
scsi: Drop scsi_req_abort
The only user of this function is spapr_vscsi.c. We can convert to
scsi_req_cancel plus adding a check in vscsi_request_cancelled.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
[Drop prototype. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Tue, 30 Sep 2014 10:52:41 +0000 (11:52 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/tcg-next-
201400729' into staging
tcg updates
# gpg: Signature made Mon 29 Sep 2014 19:58:04 BST using RSA key ID
4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
* remotes/rth/tags/tcg-next-
201400729:
tcg: Always enable TCGv type checking
qemu/compiler: Define QEMU_ARTIFICIAL
tcg-aarch64: Use 32-bit loads for qemu_ld_i32
tcg-sparc: Use UMULXHI instruction
tcg-sparc: Rename ADDX/SUBX insns
tcg-sparc: Use ADDXC in setcond_i64
tcg-sparc: Fix setcond_i32 uninitialized value
tcg-sparc: Use ADDXC in addsub2_i64
tcg-sparc: Support addsub2_i64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 30 Sep 2014 10:02:06 +0000 (11:02 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20140929' into staging
target-arm:
* more EL2/EL3 preparation work
* don't handle c15_cpar changes via tb_flush()
* fix some unused function warnings in ARM devices
* build the GDB XML for 32 bit CPUs into qemu-*-aarch64
* implement guest breakpoint support
# gpg: Signature made Mon 29 Sep 2014 19:25:37 BST using RSA key ID
14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-
20140929:
target-arm: Add support for VIRQ and VFIQ
target-arm: Add IRQ and FIQ routing to EL2 and 3
target-arm: A64: Emulate the SMC insn
target-arm: Add a Hypervisor Trap exception type
target-arm: A64: Emulate the HVC insn
target-arm: A64: Correct updates to FAR and ESR on exceptions
target-arm: Don't take interrupts targeting lower ELs
target-arm: Break out exception masking to a separate func
target-arm: A64: Refactor aarch64_cpu_do_interrupt
target-arm: Add SCR_EL3
target-arm: Add HCR_EL2
target-arm: Don't handle c15_cpar changes via tb_flush()
hw/input/tsc210x.c: Delete unused array tsc2101_rates
hw/display/pxa2xx_lcd.c: Remove unused function pxa2xx_dma_rdst_set
hw/intc/imx_avic.c: Remove unused function imx_avic_set_prio()
hw/display/blizzard.c: Delete unused function blizzard_rgb2yuv
configure: Build GDB XML for 32 bit ARM CPUs into qemu aarch64 binaries
target-arm: Implement handling of breakpoint firing
target-arm: Implement setting guest breakpoints
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fam Zheng [Tue, 23 Sep 2014 07:49:30 +0000 (15:49 +0800)]
virtio-scsi: Process ".iothread" property
We are ready, now let's effectively enable dataplane.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Tue, 23 Sep 2014 07:49:29 +0000 (15:49 +0800)]
virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Tue, 23 Sep 2014 07:49:28 +0000 (15:49 +0800)]
virtio-scsi: Batched prepare for cmd reqs
Queue the popped requests while calling
virtio_scsi_handle_cmd_req_prepare(), then submit them after all
prepared.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Tue, 23 Sep 2014 07:49:27 +0000 (15:49 +0800)]
virtio-scsi: Two stages processing of cmd request
Mechanical change, in preparation for bdrv_io_plug/bdrv_io_unplug.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Tue, 23 Sep 2014 07:49:26 +0000 (15:49 +0800)]
virtio-scsi: Add migration state notifier for dataplane code
Similar to virtio-blk-dataplane, we stop the iothread while migration
starts and restart it when migration finishes.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Tue, 23 Sep 2014 07:49:25 +0000 (15:49 +0800)]
virtio-scsi: Hook up with dataplane
This enables the virtio-scsi-dataplane code by setting the iothread
in virtio-scsi device, and makes any function that is called by
back from dataplane to cooperate with the caller: they need to be
vring/iothread aware when handling the requests and using scsi devices
on the bus.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Tue, 23 Sep 2014 07:49:24 +0000 (15:49 +0800)]
virtio-scsi-dataplane: Code to run virtio-scsi on iothread
This implements the core part of dataplane feature of virtio-scsi.
A few fields are added in VirtIOSCSICommon to maintain the dataplane
status. These fields are managed by a new source file:
virtio-scsi-dataplane.c.
Most code in this file will run on an iothread, unless otherwise
commented as in a global mutex context, such as those functions to
start, stop and setting the iothread property.
Upon start, we set up guest/host event notifiers, in a same way as
virtio-blk does. The handlers then pop request from vring and call into
virtio-scsi.c functions to process it. So we need to make sure make all
those called functions work with iothread, too.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Wed, 24 Sep 2014 07:21:41 +0000 (15:21 +0800)]
virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq
Move VirtIOSCSIReq to header and add one field "vring" as a wrapper
structure of Vring, VirtIOSCSIVring.
This is necessary for coming dataplane code that runs uses vring on
iothread.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fam Zheng [Wed, 6 Aug 2014 05:35:06 +0000 (13:35 +0800)]
virtio-scsi: Add 'iothread' property to virtio-scsi
Similar to this property in virtio-blk for dataplane, add it as a QOM
link in virtio-scsi and an alias in virtio-scsi-pci and virtio-scsi-ccw,
in order to assign an iothread to the device.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:38 +0000 (14:10 +0800)]
virtio: add a wrapper for virtio-backend initialization
For better code sharing, add a helper function that handles
reference counting of the virtio backend for virtio proxy devices.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:37 +0000 (14:10 +0800)]
virtio-9p: fix virtio-9p child refcount in transports
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is
dropped again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon
unplug the virtio-9p child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:36 +0000 (14:10 +0800)]
virtio-9p: use aliases instead of duplicate qdev properties
virtio-9p-pci all duplicate the qdev properties of their
V9fsState child. This approach does not work well with
string or pointer properties since we must be careful
about leaking or double-freeing them.
Use the QOM alias property to forward property accesses to the
V9fsState child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:35 +0000 (14:10 +0800)]
virtio-balloon: fix virtio-balloon child refcount in transports
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-balloon child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:34 +0000 (14:10 +0800)]
virtio-rng: fix virtio-rng child refcount in transports
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-rng child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:33 +0000 (14:10 +0800)]
virtio-rng: use aliases instead of duplicate qdev properties
virtio-rng-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIORNG child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIORNG child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:32 +0000 (14:10 +0800)]
virtio-serial: fix virtio-serial child refcount in transports
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-serial child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:31 +0000 (14:10 +0800)]
virtio-serial: use aliases instead of duplicate qdev properties
virtio-serial-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIOSerial child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIOSerial child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:30 +0000 (14:10 +0800)]
virtio/vhost-scsi: fix virtio-scsi/vhost-scsi child refcount in transports
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-scsi/vhost-scsi child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:29 +0000 (14:10 +0800)]
virtio/vhost-scsi: use aliases instead of duplicate qdev properties
{virtio, vhost}-scsi-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIOSCSI/VHostSCSI child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIOSCSI/VHostSCSI child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:28 +0000 (14:10 +0800)]
virtio-net: fix virtio-net child refcount in transports
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-net child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Tue, 30 Sep 2014 06:10:27 +0000 (14:10 +0800)]
virtio-net: use aliases instead of duplicate qdev properties
virtio-net-pci, virtio-net-s390, and virtio-net-ccw all duplicate the
qdev properties of their VirtIONet child. This approach does not work
well with string or pointer properties since we must be careful about
leaking or double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIONet child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Richard Henderson [Tue, 16 Sep 2014 16:51:46 +0000 (09:51 -0700)]
tcg: Always enable TCGv type checking
Instead of using structures, which imply some amount of overhead
on certain ABIs, use pointer types.
This actually reduces the size of the binaries vs a NON-debug
build on ppc64 and x86_64, due to a reduction in the number of
sign-extension insns.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 16 Sep 2014 16:47:32 +0000 (09:47 -0700)]
qemu/compiler: Define QEMU_ARTIFICIAL
The combination of always_inline + artificial allows tiny inline
functions to be written that do not interfere with debugging.
In particular, gdb will not step into an artificial function.
The always_inline attribute was introduced in gcc 4.2,
and the artificial attribute was introduced in gcc 4.3.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 2 Sep 2014 20:59:47 +0000 (13:59 -0700)]
tcg-aarch64: Use 32-bit loads for qemu_ld_i32
The "old" qemu_ld opcode did not specify the size of the result,
and so we had to assume full register width. With the new opcodes,
we can narrow the result.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 6 Aug 2014 19:32:40 +0000 (12:32 -0700)]
tcg-sparc: Use UMULXHI instruction
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 6 Aug 2014 19:16:04 +0000 (12:16 -0700)]
tcg-sparc: Rename ADDX/SUBX insns
The pre-v9 ADDX/SUBX insns were renamed ADDC/SUBC for v9.
Standardizing on the v9 name makes things less confusing.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 6 Aug 2014 19:11:25 +0000 (12:11 -0700)]
tcg-sparc: Use ADDXC in setcond_i64
Similar to the ADDC tricks we use in setcond_i32.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 6 Aug 2014 19:09:56 +0000 (12:09 -0700)]
tcg-sparc: Fix setcond_i32 uninitialized value
We failed to swap c1 and c2 correctly for NE c2 == 0.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 6 Aug 2014 18:48:48 +0000 (11:48 -0700)]
tcg-sparc: Use ADDXC in addsub2_i64
On T4 and newer Sparc chips we have an add-with-carry insn
that takes its input from %xcc instead of %icc.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 6 Mar 2014 20:49:02 +0000 (12:49 -0800)]
tcg-sparc: Support addsub2_i64
Signed-off-by: Richard Henderson <rth@twiddle.net>
Peter Maydell [Mon, 29 Sep 2014 18:28:15 +0000 (19:28 +0100)]
Merge remote-tracking branch 'remotes/spice/tags/pull-spice-
20140929-1' into staging
add and use graphic_console_set_hwops
# gpg: Signature made Mon 29 Sep 2014 11:18:37 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/spice/tags/pull-spice-
20140929-1:
qxl: use graphic_console_set_hwops
console: add graphic_console_set_hwops
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:51 +0000 (18:48 +0100)]
target-arm: Add support for VIRQ and VFIQ
This only implements the external delivery method via the GIC.
Acked-by: Greg Bellows <greg.bellows@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-12-git-send-email-edgar.iglesias@gmail.com
[PMM: adjusted following cpu-exec refactoring]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:51 +0000 (18:48 +0100)]
target-arm: Add IRQ and FIQ routing to EL2 and 3
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-11-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:50 +0000 (18:48 +0100)]
target-arm: A64: Emulate the SMC insn
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-10-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:50 +0000 (18:48 +0100)]
target-arm: Add a Hypervisor Trap exception type
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-9-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:50 +0000 (18:48 +0100)]
target-arm: A64: Emulate the HVC insn
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-8-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:50 +0000 (18:48 +0100)]
target-arm: A64: Correct updates to FAR and ESR on exceptions
Not all exception types update both FAR and ESR.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-7-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:49 +0000 (18:48 +0100)]
target-arm: Don't take interrupts targeting lower ELs
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-6-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:49 +0000 (18:48 +0100)]
target-arm: Break out exception masking to a separate func
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-5-git-send-email-edgar.iglesias@gmail.com
[PMM: updated to account for recent cpu-exec refactoring]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:49 +0000 (18:48 +0100)]
target-arm: A64: Refactor aarch64_cpu_do_interrupt
Introduce new_el and new_mode in preparation for future patches
that add support for taking exceptions to and from EL2 and 3.
No functional change.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:49 +0000 (18:48 +0100)]
target-arm: Add SCR_EL3
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-3-git-send-email-edgar.iglesias@gmail.com
[PMM: apply offsetoflow32() to correct regdef]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Mon, 29 Sep 2014 17:48:48 +0000 (18:48 +0100)]
target-arm: Add HCR_EL2
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1411718914-6608-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 29 Sep 2014 17:48:48 +0000 (18:48 +0100)]
target-arm: Don't handle c15_cpar changes via tb_flush()
At the moment we try to handle c15_cpar with the strategy of:
* emit generated code which makes assumptions about its value
* when the register value changes call tb_flush() to throw
away the now-invalid generated code
This works because XScale CPUs are always uniprocessor, but
it's confusing because it suggests that the same approach can
be taken for other registers. It also means we do a tb_flush()
on CPU reset, which makes multithreaded linux-user binaries
even more likely to fail than would otherwise be the case.
Replace it with a combination of TB flags for the access
checks done on cp0/cp1 for the XScale and iwMMXt instructions,
plus a runtime check for cp2..cp13 coprocessor accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1411056959-23070-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 29 Sep 2014 17:48:48 +0000 (18:48 +0100)]
hw/input/tsc210x.c: Delete unused array tsc2101_rates
The array tsc2101_rates[] is unused (and we don't implement
the TSC2101 anyway, only the 2102); delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1410723223-17711-5-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 29 Sep 2014 17:48:47 +0000 (18:48 +0100)]
hw/display/pxa2xx_lcd.c: Remove unused function pxa2xx_dma_rdst_set
The function pxa2xx_dma_rdst_set() is unused; delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1410723223-17711-4-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 29 Sep 2014 17:48:47 +0000 (18:48 +0100)]
hw/intc/imx_avic.c: Remove unused function imx_avic_set_prio()
The function imx_avic_set_prio() is unused; delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1410723223-17711-3-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 29 Sep 2014 17:48:47 +0000 (18:48 +0100)]
hw/display/blizzard.c: Delete unused function blizzard_rgb2yuv
The function blizzard_rgb2yuv() is unused; delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1410723223-17711-2-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 29 Sep 2014 17:48:47 +0000 (18:48 +0100)]
configure: Build GDB XML for 32 bit ARM CPUs into qemu aarch64 binaries
The qemu-aarch64 and qemu-system-aarch64 binaries include support
for all the 32 bit ARM CPUs as well as the 64 bit ones. This means
we need to build in the GDB XML files for the 32 bit CPUs too.
Otherwise gdb will complain:
warning: while parsing target description (at line 1): Could not load XML document "arm-core.xml"
when you try to connect to our gdbserver to debug a 32 bit CPU
running in a qemu-aarch64 or qemu-system-aarch64 binary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1410533739-13836-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 29 Sep 2014 17:48:46 +0000 (18:48 +0100)]
target-arm: Implement handling of breakpoint firing
Implement handling of breakpoint event firing to correctly
inject the debug exception into the guest.
Since the breakpoint and watchpoint control register format is
very similar we adjust wp_matches() to also handle breakpoints
as well rather than using a separate function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1410523465-13400-3-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 29 Sep 2014 17:48:46 +0000 (18:48 +0100)]
target-arm: Implement setting guest breakpoints
This patch adds support for setting guest breakpoints
based on values the guest writes to the DBGBVR and DBGBCR
registers. (It doesn't include the code to handle when
these breakpoints fire, so has no guest-visible effect.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1410523465-13400-2-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 29 Sep 2014 17:18:28 +0000 (18:18 +0100)]
Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
Add HMP command "info memory-devices"
qemu-socket: Eliminate silly QERR_ macros
qemu-socket: Polish errors for connect() and listen() failure
qemu-iotests: Test missing "driver" key for blockdev-add
tests: add QMP input visitor test for unions with no discriminator
qapi: dealloc visitor, implement visit_start_union
qapi: add visit_start_union and visit_end_union
virtio-balloon: fix integer overflow in memory stats feature
monitor: Reset HMP mon->rs in CHR_EVENT_OPEN
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
zhanghailiang [Tue, 23 Sep 2014 10:42:24 +0000 (18:42 +0800)]
vl: Adjust the place of calling mlockall to speedup VM's startup
If we configure mlock=on and memory policy=bind at the same time,
It will consume lots of time for system to treat with memory,
especially when call mbind behind mlockall.
Adjust the place of calling mlockall, calling mbind before mlockall
can remarkably reduce the time of VM's startup.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
zhanghailiang [Fri, 26 Sep 2014 09:16:12 +0000 (17:16 +0800)]
pc-dimm: Don't check dimm->node when there is non-NUMA config
It should not break memory hotplug feature if there is non-NUMA option.
This patch would also allow to use pc-dimm as replacement for initial memory
for non-NUMA configs.
Note: After this patch, the memory hotplug can work normally for Linux guest OS
when there is non-NUMA option and NUMA option. But not support Windows guest OS
to hotplug memory with no-NUMA config, actully, it's Windows limitation.
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gonglei [Thu, 18 Sep 2014 13:06:17 +0000 (21:06 +0800)]
pci-hotplug-old: avoid losing error message
When scsi_bus_legacy_add_drive() produces an error,
we will lose the error message. Using error_report
to report it.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Mon, 29 Sep 2014 08:27:32 +0000 (11:27 +0300)]
Revert "virtio-pci: fix migration for pci bus master"
This reverts commit
4d43d3f3c8147ade184df9a1e9e82826edd39e19.
Reported to break PPC guests.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Markus Armbruster [Wed, 20 Aug 2014 18:38:11 +0000 (20:38 +0200)]
loader: g_realloc(p, 0) frees and returns NULL, simplify
Once upon a time, it was decided that qemu_realloc(ptr, 0) should
abort. Switching to glib retired that bright idea. A bit of code
that was added to cope with it (commit 3e372cf) is still around. Bury
it.
See also commit 6528499.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Hajnoczi [Mon, 29 Sep 2014 15:40:12 +0000 (16:40 +0100)]
libqos: use microseconds instead of iterations for virtio timeout
Some hosts are slow or overloaded so test execution takes a long time.
Test cases use timeouts to protect against an infinite loop stalling the
test forever (especially important in automated test setups).
Commit
6cd14054b67774cc58a51fca6660cfa1d3c08059 ("libqos virtio:
Increase ISR timeout") increased the clock_step() value in an attempt to
lengthen the virtio interrupt wait timeout, but timeout failures are
still occuring on the Travis automated testing platform.
This is because clock_step() only affects the guest's virtual time.
Virtio requests can be bottlenecked on host disk I/O latency - which
cannot be improved by stepping the clock, so the fix was ineffective.
This patch changes the qvirtio_wait_queue_isr() and
qvirtio_wait_config_isr() timeout mechanism from loop iterations to
microseconds. This way the test case can specify an absolute 30 second
timeout. Number of loop iterations is not a reliable timeout mechanism
since the speed depends on many factors including host performance.
Tests should no longer timeout on overloaded Travis instances.
Cc: Marc Marí <marc.mari.barcelo@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Hajnoczi [Mon, 29 Sep 2014 15:40:11 +0000 (16:40 +0100)]
libqos: improve event_index test with timeout
The virtio event_index feature lets the device driver tell the device
how many requests to process before raising the next interrupt.
virtio-blk-test.c tries to verify that the device does not raise an
interrupt unnecessarily.
Unfortunately the test has a race condition. It spins checking for an
interrupt up to 100 times and then assumes the request has finished. On
a slow host the I/O request could still be in flight and the test would
fail.
This patch waits for the request to complete, or until a 30-second
timeout is reached. If an interrupt is raised while waiting the test
fails since the device was not supposed to raise interrupts.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Mon, 29 Sep 2014 15:12:59 +0000 (17:12 +0200)]
raw-posix: Fix build without posix_fallocate()
Check for the presence of posix_fallocate() in configure and only
compile in support for PREALLOC_MODE_FALLOC when it's there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 29 Sep 2014 11:26:14 +0000 (12:26 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 26 Sep 2014 19:57:52 BST using RSA key ID
C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
qemu-iotests: Fail test if explicit test case number is unknown
block: Validate node-name
vpc: fix beX_to_cpu() and cpu_to_beX() confusion
docs: add blkdebug block driver documentation
block: Catch simultaneous usage of options and their aliases
block: Specify -drive legacy option aliases in array
block: Improve message for device name clashing with node name
qemu-nbd: Destroy the BlockDriverState properly
block: Keep DriveInfo alive until BlockDriverState dies
blockdev: Disentangle BlockDriverState and DriveInfo creation
blkdebug: show an error for invalid event names
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Wed, 24 Sep 2014 15:05:45 +0000 (17:05 +0200)]
qxl: use graphic_console_set_hwops
Simply switch function pointers when entering/leaving vga mode.
Allows to remove wrapper functions which do nothing but dispatch
calls depending on the current qxl mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>