Xingyu Chen [Fri, 29 Mar 2019 07:15:25 +0000 (15:15 +0800)]
iio: adc: disable software calibration for txlx and later platform [1/1]
PD#SWPL-6483
Problem:
the txlx and later platform use the VDDA as vref by default, and we
can use directly the adc sampling value, so it is unnecessary to
recalculate calibration factor through ch7.
Solution:
add new variable to judge whether enabling the software calibration
Verify:
test pass on u200
Change-Id: I611b4d8b76c95d8fdbdf23a96801bf6d9e5eb1f7
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Liang Ji [Thu, 7 Mar 2019 03:08:25 +0000 (11:08 +0800)]
avb_ab: add avb check for product product [1/2]
PD#SWPL-6168
Problem:
avb+abupdate with care map.txt cann't boot up
because of check product partition
Solution:
add avb for product partition in dts
Verify:
ampere
Change-Id: I0310853965340d9b810a89cbf1719f9ba002261d
Signed-off-by: Liang Ji <liang.ji@amlogic.com>
Shuai Li [Sat, 30 Mar 2019 06:35:53 +0000 (14:35 +0800)]
audio: always on DDR arb [1/1]
PD#TV-3452
Problem:
Toddr stuck after a long time playback.
Solution:
For debug usage.
Verify:
No need.
Change-Id: Ibf4446148f5e028040d7d6527c7695f23f964f7c
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Yong Qin [Fri, 29 Mar 2019 09:08:09 +0000 (17:08 +0800)]
vlock: vlock: improve vlock flow [1/1]
PD#TV-3683
Problem:
1. write pll m will cause vbyone lockn unlock.
Solution:
1.not change m,f at the sametime
2.reduce the frequency of write m and f
Verify:
tl1
Change-Id: Ia1ff93122d8b2ae355eae73b0094f8e09edba1cd
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Jianxin Pan [Sat, 30 Mar 2019 16:32:00 +0000 (00:32 +0800)]
compile: fix smarthome compile error [1/1]
PD#SWPL-6186
Problem:
smarthome compile error
Solution:
fix smarthome compile error
Verify:
compile OK
Change-Id: I6909374b8abbeac8ccb4bca760208d309d24f4bd
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Hong Guo [Fri, 15 Mar 2019 07:06:25 +0000 (15:06 +0800)]
cpufreq: dts: adjust cpufreq table for g12b [1/1]
PD#SWPL-5975
Problem:
adjust cpufreq table for g12b
Solution:
adjust cpufreq table for g12b
Verify:
test pass on g12b_w400
Change-Id: I037ab2a1718a2aae0f42a15b7d95f163bc77ca85
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Shuai Li [Wed, 27 Mar 2019 08:37:00 +0000 (16:37 +0800)]
audio: add HW resample for HDMIRX [1/1]
PD#SWPL-6118
Problem:
No resample will cause mismatch between
input and output if they are not at same
samplerate.
Solution:
Add resample for hdmirx case
Verify:
Local tested.
Change-Id: I298e401578bf49484d6b75fd736d2a74c38508e4
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
shuanglong.wang [Wed, 20 Mar 2019 08:25:57 +0000 (16:25 +0800)]
video: reuse initial phase [1/1]
PD#SWPL-5664
Problem:
for netflix 23.97fps non-tunnle playback 3:2 patten broken so many times
Solution:
reuse initial phase that Tim use in amazon
Verify:
verify by u212
Change-Id: I5d988e1c3a3dbf1bb728f55a921e8b8fb6990985
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Nian Jing [Wed, 27 Mar 2019 11:04:53 +0000 (19:04 +0800)]
tvafe: lower shutdown power for tl1 [1/1]
PD#SWPL-6165
Problem:
TL1 vdee power too high when shutdown
Solution:
close bandgap when shut down for tl1
close vafe ctrl
close adc pll
Verify:
X301
Change-Id: I374bbe09ecdd456ea07f1fda3391acd4ab0bc949
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
renjiang.han [Thu, 21 Mar 2019 03:16:43 +0000 (11:16 +0800)]
PPMGR: modify phys_to_virt to codec_mm_vmap. [5/5]
PD#TV-2649
Problem:
Kernel panic with phys_to_virt.
Solution:
Replace phys_to_virt with codec_mm_vmap.
Verify:
on u212
Change-Id: Ib3f94f66d37463490720cd1348b4ec94ad12aa15
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
Jian Cao [Thu, 28 Mar 2019 09:42:39 +0000 (17:42 +0800)]
ge2d: sm1: add ge2d power control [1/1]
PD#SWPL-6186
Problem:
add ge2d power control
Solution:
add ge2d power control
Verify:
SM1-AC200 board
Change-Id: I3ea08c4d800f78e5187b6ae334849db02309ce0e
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
cancan.chang [Fri, 29 Mar 2019 10:00:49 +0000 (18:00 +0800)]
usb: add NN power control [1/1]
PD#SWPL-5380
Problem:
add NN power control
Solution:
add NN power control
Verify:
sm1
Test: pass
Change-Id: I729d782181490fc31b0b18bb27718ad12b3937c0
Signed-off-by: cancan.chang <cancan.chang@amlogic.com>
Yue Wang [Fri, 29 Mar 2019 09:32:18 +0000 (17:32 +0800)]
usb: add usb power control [1/1]
PD#SWPL-6186
Problem:
add usb power control
Solution:
add usb power control
Verify:
sm1
Test: pass
Change-Id: I6c2822105ae02f955e56dc4d64163e8e14a7e329
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Zhe Wang [Fri, 29 Mar 2019 09:21:05 +0000 (17:21 +0800)]
audio: fixed conflict of SM1-bringup and mainline [1/1]
PD#SWPL-6486
Problem:
merge to mainline conflict.
Solution:
add clk change in dts
Verify:
sm1_ac200, verify pass
Change-Id: I37e7317cd795cd8cb9815ff20db49bc8644f0087
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Shunzhou Jiang [Thu, 21 Mar 2019 09:43:57 +0000 (17:43 +0800)]
power: sm1: add power control driver [1/1]
PD#SWPL-6186
Problem:
add power control register
Solution:
avoid same register access at the same time
Verify:
sm1_skt
Change-Id: I0ec61cda9721c1b95a9d78f7884458f442581fe5
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Hong Guo [Mon, 25 Mar 2019 09:08:59 +0000 (17:08 +0800)]
CPUFREQ: update cpufreq tables for sm1. [1/1]
PD#SWPL-6205
Problem:
update cpufreq tables.
Solution:
update cpufreq tables.
Verify:
sm1_ac200, verify pass
Change-Id: I360264df88981a16267a20896f97c93dbd0e4b37
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Xing Wang [Sat, 23 Mar 2019 10:12:24 +0000 (18:12 +0800)]
audio: auge: support earc rx for sm1 [1/2]
PD#SWPL-5389
Problem:
earc rx dmac reset and clk issue
Solution:
fix earc rx dmac and clk
Verify:
ac200
Change-Id: Ie8e5582f1ee358a8cf694965c9963ae1eeb6685a
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
cancan.chang [Mon, 25 Mar 2019 10:42:53 +0000 (18:42 +0800)]
NNA: add NNA support on sm1 [1/1]
PD#SWPL-5380
Problem:
sm1 not support NNA now.
Solution:
add NNA support.
Verify:
sm1_ac200 & sm1_skt
Change-Id: I3de566bbc730ef69f26160ad9f915ac92b4f2e2b
Signed-off-by: Cancan Chang <cancan.chang@amlogic.com>
Shunzhou Jiang [Fri, 22 Mar 2019 11:09:42 +0000 (19:09 +0800)]
clk: sm1: add sm1 special clk [1/1]
PD#SWPL-5407
Problem:
not include sm1 special defined clk
Solution:
add this clk
Verify:
sm1_skt
Change-Id: Iaf20aebe377d077d95eb053f7eea99473e3ac45d
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Hang Cheng [Fri, 22 Mar 2019 07:58:50 +0000 (15:58 +0800)]
cec: add change for sm1 [1/1]
PD#SWPL-5419
Problem:
cec change for sm1
Solution:
add cec change for sm1
Verify:
ac200
Change-Id: Ic808e4bd128358b7f10c7f0b21a629d72f1c71cc
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Evoke Zhang [Mon, 18 Mar 2019 11:48:02 +0000 (19:48 +0800)]
vdin: add sm1 support [1/1]
PD#SWPL-6065
Problem:
need add vdin support for sm1
Solution:
add vdin support for sm1
Verify:
pxp
Change-Id: I55af5273607a88f4e5a2394de0acbb44811da8f9
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Qianggui Song [Fri, 8 Mar 2019 07:40:42 +0000 (15:40 +0800)]
irqchip: sm1 support double-edge gpio irq trigger [1/1]
PD#SWPL-5395
Problem:
sm1 support double-edge trigger, current code do not support.
Solution:
add relatvie bitmask to support this function.
Verify:
ptm & sm1_skt
Change-Id: I48ebc9b38db868f946c49b6fd5f98d427b2669df
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Xing Wang [Thu, 21 Mar 2019 14:52:17 +0000 (22:52 +0800)]
audio: auge: support av out and amp spk for sm1 [1/2]
PD#SWPL-6192
Problem:
no sound from av and amp spk
Solution:
1) fix tocodec for sm1
2) add no mclk control for ad82584
Verify:
ac200
Change-Id: I63f0ec94d2f5b980249ac5c9c810c8e4d8410ea3
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Chuangcheng Peng [Fri, 22 Mar 2019 10:08:48 +0000 (18:08 +0800)]
dvb: sm1 bringup add one asyncfifo [2/2]
PD#SWPL-5403
Problem:
demux add one asyncfifo, need compatile
Solution:
demux compatile with previous code.
Verify:
verify at sm1
Change-Id: Iea0b7b5f69d3200062b9e757f2712b98926fb3b9
Signed-off-by: Chuangcheng Peng <chuangcheng.peng@amlogic.com>
Yong Qin [Fri, 22 Mar 2019 12:41:15 +0000 (20:41 +0800)]
di: add di for sm1 bringup [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
add the chipid
Verify:
sm
Change-Id: I9b738efea210b4fb3deb2dab9de6a443aabadb53
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Jianxiong Pan [Fri, 22 Mar 2019 06:48:48 +0000 (14:48 +0800)]
dts: add dts-id for sm1 and g12a_u200. [1/1]
PD#SWPL-5865
Problem:
add dts-id for sm1 and g12a.
Solution:
sm1_ac200_2g
g12a_u200_1g
g12a_u200_2g
Verify:
no test.
Change-Id: Id09b2b811529d11b85898e5f3e83f558dc7ba5f6
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Hong Guo [Fri, 22 Mar 2019 06:09:36 +0000 (14:09 +0800)]
CPUFREQ: delete different cpufreq tables for sm1. [1/1]
PD#SWPL-6205
Problem:
delete different cpufreq tables.
Solution:
delete different cpufreq tables.
Verify:
sm1_ac200, verify pass
Change-Id: I99142d2f99847f45eafc876a1b2d785a28815e15
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Hanjie Lin [Fri, 22 Mar 2019 06:04:22 +0000 (14:04 +0800)]
dts: arm: disable cpu idle [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
cpu idle has not ready, disable it
Verify:
AC200
Change-Id: I5dd4bf8d2940587b10b8c85ff64122ce931bfb85
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Jian Cao [Wed, 20 Mar 2019 09:37:08 +0000 (17:37 +0800)]
ge2d: change ge2d to independent power [1/1]
PD#SWPL-5391
Problem:
change ge2d to independent power
Solution:
add independent power switch
Verify:
verified on SM1-AC200 board
Change-Id: Ifce980fc88753db63317c11bc1126e492b677a64
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Evoke Zhang [Wed, 20 Mar 2019 10:54:47 +0000 (18:54 +0800)]
lcd: add mipi-dsi support for sm1 [2/2]
PD#SWPL-6114
Problem:
add mipi-dsi support for sm1
Solution:
add lcd_chip_sm1
Verify:
verify by S905x3
Change-Id: I1b95676ad1300f8cbf859f89b557f680cccff117
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Xing Wang [Wed, 20 Mar 2019 14:44:51 +0000 (22:44 +0800)]
audio: auge: add sound card for sm1 [2/2]
PD#SWPL-6151
Problem:
sound card for sm1
Solution:
add sound card for sm1
Verify:
ac200
Change-Id: I4f65472af7a8399fb6fe003db608158e11bed566
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
ruixuan.li [Wed, 20 Mar 2019 16:21:10 +0000 (00:21 +0800)]
sm1: emmc run hs200 busmode [1/1]
PD#SWPL-5404
Problem:
emmc report data crc error in hs200 busmode
Solution:
set hs200 co_phase to 2 and did not reset the
hs200 co_phase and tx_phase when adjust tuning is
find the error point in sm1
Verify:
verify pass on sm1_s905d3_ac200
Change-Id: I56aa8eb666fb55641db75878a3488f66c721bd6d
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
Tao Guo [Wed, 16 Jan 2019 09:11:54 +0000 (17:11 +0800)]
debug: add atrace support [1/1]
PD#SWPL-4956
Problem:
Need atrace to debug multimedia issue
Solution:
Add atrace functions
Verify:
P212
Change-Id: Ieee441fc75b6f83e8e8a22350a402ec7e77f1134
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
Xing Wang [Wed, 20 Mar 2019 14:11:44 +0000 (22:11 +0800)]
dts: sm1: add sound card config [1/2]
PD#SWPL-6151
Problem:
sound card for sm1
Solution:
add sound card for sm1
Verify:
ac200
Change-Id: I1de0cfe1748d401ab0e21b0a244def37b277b1ff
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Qiang Li [Wed, 20 Mar 2019 15:21:45 +0000 (23:21 +0800)]
dts: sm1: dts enable sdio node. [1/1]
PD#SWPL-5409
Problem:
dts sdio node disable.
Solution:
dts enable sdio node.
Verify:
SM1_AC200
Change-Id: Ifd33de0f08adb202af07eee13db8894fdf0c77fa
Signed-off-by: Qiang Li <qiang.li@amlogic.com>
ruixuan.li [Wed, 20 Mar 2019 11:06:24 +0000 (19:06 +0800)]
sm1: modify 400k co_phase [1/1]
PD#SWPL-5404
Problem:
emmc report response crc error in high speed mode
Solution:
modify 400k co_phas
Verify:
verify on ac200
Change-Id: I8bd0cbeb121e7a35a5f96791449187150e650d9e
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
Nian Jing [Wed, 20 Mar 2019 03:26:28 +0000 (11:26 +0800)]
cvbs: add cvbs support for sm1 [1/1]
PD#SWPL-6112
Problem:
need add cvbsout support for sm1
Solution:
add cvbsout support for sm1
Verify:
sm1
Change-Id: I037fbdb41b823d9ef93a9069f3798f8d38ac5796
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Yi Zhou [Mon, 18 Mar 2019 08:53:42 +0000 (16:53 +0800)]
dv: dv bringup for sm1 [1/1]
PD#SWPL-5408
Problem:
dv bringup for sm1
Solution:
dv bringup for sm1, add chip id
Verify:
sm1 ptm
Change-Id: Ifbf175cb5c495949f5e4bd02b98690f08239a735
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Shunzhou Jiang [Wed, 20 Mar 2019 07:33:25 +0000 (15:33 +0800)]
clk: sm1: add clk measure driver [1/2]
PD#SWPL-5407
Problem:
sm1 support clk measure
Solution:
support clk measure
Verify:
ac200
Change-Id: I43c74375c16fee73037a1df4e4531c429e1229fd
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Shunzhou Jiang [Tue, 19 Mar 2019 07:13:53 +0000 (15:13 +0800)]
clk: sm1: add clk measure driver [2/2]
PD#SWPL-5407
Problem:
sm1 support clk measure
Solution:
support clk measure
Verify:
ac200
Change-Id: If87c7c0bc53c8e2bcbf58a685f9ef7ac75462a70
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Brian Zhu [Tue, 19 Mar 2019 16:13:20 +0000 (00:13 +0800)]
vpp: sm1: add vpp and sr support [1/1]
PD#SWPL-6101
Problem:
Need vpp and sr supprt for sm1
Solution:
add support for sm1
Verify:
test pass on sm1 ac200
Change-Id: I038ceba52a0b47512767e851d0047a3ee36e351c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Yue Wang [Wed, 20 Mar 2019 07:24:46 +0000 (15:24 +0800)]
usb: modify usb dts for sm1 [1/1]
PD#SWPL-5385
Problem:
SM1 bring up
Solution:
modify usb dts for SM1 bringup
Verify:
g12a
Test: pass
Change-Id: Ie6f2925315ce12b3ad2964cf85aa3f4cee4bf2a7
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Nanxin.Qin [Wed, 20 Mar 2019 07:46:56 +0000 (15:46 +0800)]
dts: update chip name. [2/2]
PD#SWPL-5261
Problem:
update chip name.
Solution:
the chip name used for media modules.
Verify:
AC200
Change-Id: I229ca3f991b29fdebf10f98dff5173768b910aaa
Signed-off-by: Nanxin.Qin <nanxin.qin@amlogic.com>
zhiqiang liang [Wed, 20 Mar 2019 07:00:40 +0000 (15:00 +0800)]
cpu: add the cpuid check interface [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
add the cpuid check interface
Verify:
AC200
Change-Id: Ifa7dd8fb0b6ec621411652acf6b799e69c4069b7
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Pengcheng Chen [Wed, 20 Mar 2019 02:36:09 +0000 (10:36 +0800)]
osd: add osd SM1 feature [1/1]
PD#SWPL-6106
Problem:
bring up osd for SM1
Solution:
add osd SM1 feature
Verify:
Verified on SM1-AC200
Change-Id: I5cba13f7539e48f6cba1ca0fb3abcaad2ba8494d
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Qianggui Song [Fri, 8 Mar 2019 07:52:57 +0000 (15:52 +0800)]
pinctrl: add extra pins for sm1 base on g12b [1/1]
PD#SWPL-5405
Problem:
sm1 add some new pins base on g12b, pinmux need update.
Solution:
update extra pins to g12b pinmux.
Verify:
pxp
Change-Id: Idbdddb1e64ffb4e5a63ee3a69b5fc40e7ecfcc44
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Qiang Li [Wed, 20 Mar 2019 03:15:04 +0000 (11:15 +0800)]
sdcard: sm1: fix dts problem. [2/2]
PD#SWPL-5409
Problem:
dts compile error.
Solution:
delect sd_emmc_b2 node.
Verify:
SM1_AC200
Change-Id: Ib3965a083fdc3f95a5c0a9de37bff98c898d0993
Signed-off-by: Qiang Li <qiang.li@amlogic.com>
Jian Cao [Tue, 19 Mar 2019 11:26:04 +0000 (19:26 +0800)]
media: add codec support for SM1 [1/1]
PD#SWPL-2867
Problem:
bringup codec for SM1.
Solution:
add the register ops for SM1
Verify:
Verified on SM1-AC200
Change-Id: I31db8f0b5816d67664e8161b3dc73574909afe31
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
ruixuan.li [Tue, 19 Mar 2019 08:54:38 +0000 (16:54 +0800)]
sm1: disable emmc calc_f methods [1/1]
PD#SWPL-5404
Problem:
sm1 usb fixdiv mode set adjust cause error
Solution:
disable emmc calc_f in dtsi.
Verify:
test pass on sm1 ac200
Change-Id: I4459bf4faa2141a9e684b1e5bb95fb806eecbbfa
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
Qiang Li [Tue, 19 Mar 2019 06:44:14 +0000 (14:44 +0800)]
sdcard: sm1: add sdcard support. [1/2]
PD#SWPL-5409
Problem:
sm1 sdcard failed.
Solution:
change sm1 sdcard high speed mode co_phase.
Verify:
SM1_AC200
Change-Id: I295c6fac2594e611bf278f83a97bb503fb8bb13b
Signed-off-by: Qiang Li <qiang.li@amlogic.com>
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Evoke Zhang [Tue, 19 Mar 2019 04:38:30 +0000 (12:38 +0800)]
vpu: fix mem_pd reg addr mistake [1/1]
PD#SWPL-5857
Problem:
vpu_mem_pd register address changed
Solution:
update vpu_mem_pd register address for sm1
Verify:
pxp
Change-Id: Iefcb190b40a5ac949351a4c88bea502e437cd59f
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Huan Biao [Tue, 19 Mar 2019 07:53:11 +0000 (15:53 +0800)]
thermal: dts: enable sm1 thermal [1/1]
PD#SWPL-6071
Problem:
enable thermal for sm1
Solution:
enable thermal for sm1
Verify:
test pass on sm1_skt
Change-Id: I54fd4431bec1a48135da0b0b9c05cd53d4055a56
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Evoke Zhang [Thu, 14 Mar 2019 04:30:44 +0000 (12:30 +0800)]
vpu: add vpu support for sm1 [1/1]
PD#SWPL-5857
Problem:
sm1 is a new chip
Solution:
add sm1 support for vpu driver
Verify:
pxp
Change-Id: I88966a26fb4f8f90620081c4d9a86ad21a6e03fc
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
zhiqiang liang [Mon, 18 Mar 2019 14:50:37 +0000 (22:50 +0800)]
dts: modify the dts for skt and ac200 board [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
modify the dts for skt and ac200 board
Verify:
AC200
Change-Id: I5e5d52329d7a190ad2b4bd967be837b4ae91ea11
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
zhiqiang liang [Mon, 18 Mar 2019 13:01:31 +0000 (21:01 +0800)]
dts: add the chipid for sm1 bringup [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
add the chipid
Verify:
PxP
Change-Id: I7164a4fff39932f81de1b5c4404f1ad0d878484c
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Jianxiong Pan [Mon, 18 Mar 2019 06:53:06 +0000 (14:53 +0800)]
dts: sm1: add sm1_s905d3_ac200 and sm1_s905d3_skt dts. [1/1]
PD#SWPL-5865
Problem:
add sm1 dts.
Solution:
copy from g12a_s905d2_u200.dts.
Verify:
no.
Change-Id: Idcd997d2c1a52a247c55ad41b557941314dfcb2c
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Shunzhou Jiang [Wed, 6 Mar 2019 06:10:20 +0000 (14:10 +0800)]
clk: sm1: add clk driver [1/1]
PD#SWPL-5407
Problem:
sm1 not have clk driver
Solution:
add clk driver
Verify:
PxP
Change-Id: Id48257d88ef200fd4adb309bf2e4ada1be407753
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Yi Zhou [Mon, 4 Mar 2019 10:57:46 +0000 (18:57 +0800)]
hdmitx: hdmitx bringup for sm1 [1/1]
PD#SWPL-5408
Problem:
hdmitx bringup for sm1
Solution:
hdmitx bringup for sm1, add chip id
Verify:
sm1 ptm
Change-Id: I804dec4b743c660b180b7061d110ab76b9ec0468
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
zhiqiang liang [Fri, 15 Mar 2019 07:07:16 +0000 (15:07 +0800)]
dts: add the partition info for sm1 bringup [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
add the partition info
Verify:
PxP
Change-Id: I779369d92780f9380cb634a90cabb012df11859d
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Jiyu Yang [Wed, 13 Mar 2019 02:30:06 +0000 (10:30 +0800)]
dts: use mesong12a-bifrost instead [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
commit dts for SM1 bringup
Verify:
PxP
Change-Id: Ifdbc751e2fa9ecb3d747c114ac820ab60021294d
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
zhiqiang liang [Wed, 13 Mar 2019 03:14:11 +0000 (11:14 +0800)]
dts: modify dts for SM1 bringup with SMP [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
modify dts for SM1 bringup with smp
Verify:
PxP
Change-Id: Ie83ad7434acfb8c6232a8e373dfc63ef0ba9b87e
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
zhiqiang liang [Tue, 12 Mar 2019 07:20:22 +0000 (15:20 +0800)]
dts: rename dts for SM1 bringup [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
rename dts for SM1 bringup
Verify:
PxP
Change-Id: I991b6a0fb65cf9a03c6cb75a1ad8823a067e6bdd
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
zhiqiang liang [Mon, 11 Mar 2019 11:46:30 +0000 (19:46 +0800)]
dts: commit dts for SM1 bringup [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
commit dts for SM1 bringup
Verify:
PxP
Change-Id: Id117d7ff130c67feb8ca04657d8a4ad463793fed
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
zhiwei.yuan [Tue, 19 Mar 2019 03:07:42 +0000 (11:07 +0800)]
dtv_demod: add AGC control for board t309 [1/1]
PD#SWPL-5175
Problem:
r842 agc control need be controlled by demod
Solution:
add agc control function
Verify:
verified by t962x2_x301 t962x2_t309
Change-Id: If712e22276b97c457e2e2ed1c79bdf3673813dff
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Bencheng Jing [Thu, 21 Mar 2019 14:45:16 +0000 (22:45 +0800)]
amvecm: dnlp new c curve and interface [1/4]
PD#SWPL-5338
Problem:
dnlp new c curve and interface
Solution:
dnlp new c curve and interface
Verify:
x301
Change-Id: I7a221b6c5546873ebc3c3182d4856d57ffc3df48
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Bencheng Jing [Fri, 22 Feb 2019 05:29:34 +0000 (13:29 +0800)]
amvecm: add ioctrl interface for hdr type. [1/1]
PD#TV-1592
Problem:
no interface to get hdr type
Solution:
add ioctrl interface for hdr type
Verify:
tl1
Change-Id: Ib7781fa8c924cbd7721b592acb18d3b834a04f06
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Nian Jing [Tue, 26 Mar 2019 09:35:49 +0000 (17:35 +0800)]
tvafe: fix vertical stripes for tl1 [1/1]
PD#SWPL-6349
Problem:
av vertical stripes on colobar
Solution:
fix vertical stripes
Verify:
verify on x301
Change-Id: I590f2b1da9b9a8f36973b00973b70a1c1c9dfb9e
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Yong Qin [Mon, 25 Mar 2019 13:01:15 +0000 (21:01 +0800)]
vlock: pretect display pll set in vlock [1/1]
PD#TV-3683
Problem:
1.pretect display pll set in vlock, m and frac value
write at the sametime.
Solution:
1.optmis vlock flow
2.add notify_callback when mode change
Verify:
tl1
Change-Id: I72fab117c5b7247659c5c08eeff62fbc4d421839
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
shaochan.liu [Tue, 26 Mar 2019 03:27:02 +0000 (11:27 +0800)]
lcd: supposed vlock_m and vlock_farc interface [1/1]
PD#TV-3683
Problem:
Repeatedly exit HDMI channel cause black screen
Solution:
1, support vlock_m and vlock_frac interface
2, optimized clk change and de timing
Verify:
verify on t962x2-x301
Change-Id: Iddedade08300290853e59b026b3ca1b9939eed79
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Yong Qin [Tue, 26 Mar 2019 09:01:44 +0000 (17:01 +0800)]
di: monkey test di cause crash [1/1]
PD#SWPL-6133
Problem:
monkey test di cause crash,when is di reg processing, unreg event
attach, and released the di buffer, so cause crash.
Solution:
every unreg event received, need waitting reg process had done.
Verify:
tl1
Change-Id: I2f2bb068ed65ab14ab4f09de96b64d7290da5914
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Xiaoming Sui [Tue, 26 Mar 2019 14:06:04 +0000 (22:06 +0800)]
tsync: reduce the log information [1/1]
PD#SWPL-6152
Problem:
in some special cases, there are many sync
log information from serial port.
Solution:
remove this log and add pts realign.
Verify:
X301
Change-Id: I81d1753ef6d4e6c1e39d6c7f38eb3836e07be05d
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
Nian Jing [Fri, 15 Mar 2019 11:20:40 +0000 (19:20 +0800)]
tvafe: add control for tvconfig snow config [1/1]
PD#SWPL-5985
Problem:
display snow when snow config disabled
Solution:
add control for tvconfig snow config
Verify:
verify it on x301
Change-Id: I3466efc98577f2403f3a6cd638ad7dbf70ce34dc
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Pengcheng Chen [Thu, 28 Mar 2019 08:02:18 +0000 (16:02 +0800)]
gdc: add gdc dmabuf 32bit compatible [2/2]
PD#SWPL-5685
Problem:
gdc dmabuf not work under 32bit
Solution:
add gdc dmabuf 32bit compatible
Verify:
verified by w400
Change-Id: If26f41ff6cd679dc0220771f5bb2b50eba899aa9
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Thu, 28 Mar 2019 07:12:16 +0000 (15:12 +0800)]
ge2d: add ge2d dmabuf 32bit compatible [1/2]
PD#SWPL-5685
Problem:
ge2d dmabuf not work under 32bit
Solution:
add ge2d dmabuf 32bit compatible
Verify:
verified by w400
Change-Id: I03011620fc67cdaf251f5ca1c7b0b512a8fc9a76
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Thu, 21 Mar 2019 10:44:56 +0000 (18:44 +0800)]
gdc: change dma_buf to cacheable [2/2]
PD#SWPL-5685
Problem:
gdc output dmabuf have high variance
Solution:
change dma_buf to cacheable
Verify:
verified by w400
Change-Id: Ide8cea975c7dd39bb9185fbb9ba0694d859c74e6
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Thu, 21 Mar 2019 09:33:13 +0000 (17:33 +0800)]
ge2d: change dma_buf to cacheable [1/2]
PD#SWPL-5685
Problem:
ge2d output dmabuf have high variance
Solution:
change dma_buf to cacheable
Verify:
verified by w400
Change-Id: Iff9356dd256ce69bd87e7e5a2b1feb9e74c49744
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Jiamin Ma [Wed, 27 Mar 2019 10:32:44 +0000 (18:32 +0800)]
cpu_affinity: restore the original cpu affinity correctly [1/1]
PD#SWPL-5595
Problem:
set_cpus_allowed_ptr(current, cpu_all_mask) is always errorly
called to retore CPU affinity for current task. In some cases,
the current may be a bounded kworker thread, and we should not
set its CPU affinity to all CPUs
Solution:
Save the original CPU affinity and restore it
Verify:
W400 revB
Change-Id: I3cd65e79791563af9dacc09639b8645b97979c44
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Brian Zhu [Wed, 20 Mar 2019 17:15:54 +0000 (01:15 +0800)]
vpp: add black_threshold to disable video when window is too small [1/1]
PD#TV-3641
Problem:
Add new interface to disable video when window is too small
Solution:
Add the black_threshold interface to control the threshold size.
And set the default value is width=20, height=30.
Verify:
verified by x301
Change-Id: Ifeb376c2e2edbb5706b2cdc2d08421bd0086b01e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Yi Zhou [Mon, 25 Mar 2019 11:19:26 +0000 (19:19 +0800)]
hdmitx: fix flash screen when resuming and playing hdr [1/1]
PD#SWPL-6169
Problem:
when resuming and playing hdr films, flash screen will happen
under LG TV
Solution:
quantization range has changed between UI and playing hdr
films. we keep quantization unchanged. Same as MTK.
Verify:
s905x2
Change-Id: I071abecfba705dbd44d33c2673d4938c39f419cf
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Evoke Zhang [Mon, 25 Mar 2019 11:49:03 +0000 (19:49 +0800)]
vdin: fix vdin1 dest_cfmt for tl1 afbc preview support [1/1]
PD#SWPL-5971
Problem:
preview window color is green with 1080p & 4k hdmirx
Solution:
vdin1 dest_cfmt follow vdin0 for the software double write for preview
Verify:
x301
Change-Id: I2e45b5f838cddcac1ca1c4e6710a7cc1f45ae9b5
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Hong Guo [Tue, 26 Mar 2019 07:47:49 +0000 (15:47 +0800)]
cpufreq: free clk if failed to set 1G for fixpll when cpufreq init. [1/1]
PD#SWPL-6394
Problem:
free clk if failed to set 1G for fixpll.
Solution:
free clk if failed to set 1G for fixpll..
Verify:
test pass on A311D-W400
Change-Id: I1a7af6fe459c067e34ff8752453a1a04985edb88
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Pengcheng Chen [Mon, 11 Mar 2019 09:48:52 +0000 (17:48 +0800)]
gdc: ge2d: output dma_buf need flush when alloc [1/1]
PD#SWPL-5685
Problem:
gdc output mismatch
Solution:
output dma_buf need flush when alloc
Verify:
verified by w400
Change-Id: Ie206b4f51bd1338420f63e0e06563b67d6d63c88
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Brian Zhu [Tue, 26 Mar 2019 11:13:27 +0000 (19:13 +0800)]
vpp: including crop info when AFBC switch to normal frame [1/1]
PD#SWPL-6347
Problem:
When AFBC switch to normal frame, excluding the crop information, the pps
parameters are calculated with wrong input size.
Solution:
1.Add the crop information, when afbc swicth to normal frame.
2.check ratio of compress_width/width, sync to crop value
Verify:
verified on x301
Change-Id: Ib943f8a11263ce577952e589bc172d8b7bafd954
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
long yu [Mon, 25 Mar 2019 09:46:07 +0000 (17:46 +0800)]
emmc: backward compatible with all HS400 clock sources [1/1]
PD#SWPL-6294
Problem:
TL1 and G12B uses clkin3,TXLX uses clkin2
Solution:
unifying the HS400 source clock name in DTS
Verify:
TL1-T962X2_X301 G12B-Reva G12B-Revb
Change-Id: I7acaf7b4392d757955f43a0b17ac1fad84f53d26
Signed-off-by: Long Yu <long.yu@amlogic.com>
shihong.zheng [Tue, 26 Mar 2019 10:40:27 +0000 (18:40 +0800)]
pts: fix mvc play is not smooth. [1/1]
PD#SWPL-6094
Problem:
some mvc stream is not smooth.
Solution:
optimize the condition for pts loockup fail code.
Verify:
x301
Change-Id: I50bb3f317e1245735f9ce0ffcc44376c91e871ed
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
zhiwei.yuan [Mon, 25 Mar 2019 09:28:35 +0000 (17:28 +0800)]
dtv_demod: playing dtmb is not smooth when signal is non-standard [1/1]
PD#SWPL-6286
Problem:
tps of non-standard signal is incorrect
Solution:
ignore calculating amplitude tps
Verify:
verified by t962x2_x301
Change-Id: Ibd3ff7bfe56ca604ad99fa7c6f457202c227c9ae
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Nan Li [Fri, 22 Mar 2019 02:40:43 +0000 (10:40 +0800)]
emmc: modify data delay_step [1/1]
PD#SWPL-6200
Problem:
emmc calibration delay set error.
Solution:
modify delay_step to 250ps.
Verify:
verify by s912.
Change-Id: I1c0e31ae6bdda8b0f105e12f3efc81b5474376d6
Signed-off-by: Nan Li <nan.li@amlogic.com>
Zhe Wang [Mon, 25 Mar 2019 11:53:30 +0000 (19:53 +0800)]
audio: add tdm and spdif clk fine tuning interface [1/1]
PD#SWPL-5518
Problem:
In DTV passthrough, the output clk drifts from input
Solution:
add clk fine tuning interface
Verify:
verify by X301
Change-Id: I969d3eb865fb1aba90f155965548454cc3040c99
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
zhiwei.yuan [Thu, 14 Mar 2019 06:31:38 +0000 (14:31 +0800)]
di: "DI: di_init_buf vmap fail" is seen when power on [1/1]
PD#SWPL-5908
Problem:
execute vmap when di reserved memory is disable
Solution:
skip memory calculation in init buf while using cma
Verify:
verified by t962x2_x301
Change-Id: Ib0c2e422f61f2b4182109cb7bbb3107029363ce0
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Xing Wang [Fri, 25 Jan 2019 14:55:49 +0000 (22:55 +0800)]
audio: auge: transfer audio data to wake word algorithm [1/3]
PD#TV-3389
Problem:
add vad wake engine in kernel
Solution:
transfer audio data to wake engine
Verify:
x301
Change-Id: I7f44d0141141775bb40f01dbc344a295a72c9d87
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
yicheng shen [Fri, 22 Mar 2019 07:10:29 +0000 (03:10 -0400)]
hdmirx: update vb phy setting [1/1]
PD#SWPL-6234
Problem:
flash line in the screen when HDMI connect iTV IV3010 box.
Solution:
1.update phy low frequency setting;
2.optimzie pll init sequence to save some detection time;
3.update verB pll setting(0323);
Verify:
TL1
Change-Id: I71225b06f02e4888ce093780a2beb0a381986293
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Yong Qin [Mon, 25 Mar 2019 08:12:14 +0000 (16:12 +0800)]
di: av to dtv , black screen [1/1]
PD#SWPL-6096
Problem:
from local av switch to dtv，black screen,then search channel
Solution:
revert the modification "62617"
Verify:
tl1
Change-Id: I49ae627b9f0b1f6a776e5cbffc723a43e85cee72
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Nan Li [Fri, 22 Mar 2019 11:42:12 +0000 (19:42 +0800)]
sd: optimize sduart not supported flag [1/1]
PD#SWPL-4858
Problem:
Soc not support sduart
Solution:
add not supported flag in dts
Verify:
verify by tl1 skt
Change-Id: Ifd1f975bd13b150aac9d99f60423ab4f0b903c98
Signed-off-by: Nan Li <nan.li@amlogic.com>
Hong Guo [Wed, 20 Mar 2019 06:36:56 +0000 (14:36 +0800)]
cpufreq: dts: adjust cpufreq table for tl1 [1/1]
PD#SWPL-5823
Problem:
adjust cpufreq table for tl1
Solution:
adjust cpufreq table for tl1
Verify:
test pass on tl1_x301
Change-Id: I69f5efc5051c09102c07df34b7bd33b30c61361f
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Zhe Wang [Thu, 14 Mar 2019 14:16:36 +0000 (22:16 +0800)]
audio: add soc DRC tune interface [1/3]
PD#SWPL-5904
Problem:
Audio DRC in SOC is out of work
Solution:
Add DRC tune interface
Verify:
Verify on X301
Change-Id: I5e8ecc6dafd7fc3805b0c3e60a6ec4c945729119
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
long yu [Fri, 15 Mar 2019 07:38:47 +0000 (15:38 +0800)]
storage: emmc: reduce cmd/ds/data pins driver strength for TL1 SOC [1/1]
PD#SWPL-5334
Problem:
TX window is not stable
Solution:
Reduce the drive capability of emmc controller pins
Verify:
TL1-T962X2_X301
Change-Id: Ib641c66131c2dee41eb68fb262f4770f431676b9
Signed-off-by: long yu <long.yu@amlogic.com>
Gongwei Chen [Thu, 21 Mar 2019 12:17:49 +0000 (20:17 +0800)]
dts: g12a and g12b no audio output [1/1]
PD#SWPL-6171
Problem:
no audio output
Solution:
modify dts spdifout_a_mute
Verify:
Verify by Android P AOSP fermi
Change-Id: Ie19d22326154b8f59ce06dce994f8dd072e93170
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Yong Qin [Fri, 22 Mar 2019 06:36:17 +0000 (14:36 +0800)]
di: The last frame of the video flash garbage [1/1]
PD#SWPL-6070
Problem:
flash garbages when unreg process.
Solution:
can't speed down the clkb rate, there is a mirror mode
Verify:
tl1
Change-Id: I5fcc29a1cda196992a457f40fee31992f4bc1528
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Shuai Li [Thu, 21 Mar 2019 12:20:21 +0000 (20:20 +0800)]
audio: add I2S samesrc channel mapping to spdif [1/1]
PD#SWPL-6147
Problem:
I2S has 8 channels but spdif only 2.
Need map every single i2s lane to spdif sharebuffer.
Solution:
Add the DTS setting MASKS as former does.
Verify:
Local tested.
Change-Id: If212fc1b9c937a42778682948773874951b8a55a
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Hong Guo [Fri, 22 Mar 2019 05:23:36 +0000 (13:23 +0800)]
CPUFREQ: Setting different cpufreq tables. [1/1]
PD#SWPL-4035
Problem:
Setting different cpufreq tables.
Solution:
Setting different cpufreq tables.
Verify:
g12a_u200, verify pass
Change-Id: If93f1baa1f50aeeed6e3d7f9d2ffeb1e0a5b4e02
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
projects / platform / kernel / linux-amlogic.git / log