IB/SA: Add support to query opa classport info.

For OPA devices, SA will query the OPA classport info
instead of the IB defined classport info.
opa classport info exposes additional information and
capabilities that are specific to OPA devices.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Move opa_class_port_info definition to header file

Both opa_vnic and the hfi driver use the same opa_classport_info
definition. We will also have ib_sa capable of querying opa class
port info and would need this definition. Move it to ib_mad.h
for everyone to use.

Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add rdma_cap_opa_ah to expose opa address handles

rdma_cap_opa_ah(..) enables core components to check if the
corresponding port supports OPA extended addressing.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Modify SA to implicitly cache Class Port info

SA will query and cache class port info as part of
its initialization. SA will also invalidate and
refresh the cache based on specific events. Callers such
as IPoIB and CM can query the SA to get the classportinfo
information. Apart from making the caller code much simpler,
this change puts the onus on the SA to query and maintain
classportinfo much like how it maitains the address handle to the SM.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Move functions update_sm_ah() and ib_sa_event()

Moving these will facilitate changes to these in the
next patchs. This is strictly a move and there are no
changes to the functions in any way.

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Remove unwanted braces

This fixes a checkpatch issue. The fix is needed
so that some of these functions can be moved around
in the forthcoming patches

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Add braces when using sizeof

This fixes a checkpatch issue. The fix is needed
so that some of these functions can be moved around
in the forthcoming patches

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Fix lines longer than 80 columns

This fixes a checkpatch issue. The fix is needed
so that some of these functions can be moved around
in the forthcoming patches

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Use bool in process_ecn

The process_ecn intends to return a bool value. However it is doing
so incorrectly by ANDing the fecn mask. The fecn bit is bit 31. Bool is
not a native data type and is up to the compiler to implement how it
sees fit. It is conceivable that this upper bit gets washed out.

Fix by converting to a bool properly.

Cc: stable@vger.kernel.org
Fixes: Commit fd2b562edca6 ("IB/hfi1: Pull FECN/BECN processing to a common place")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi: Protect against writable mmap

The device/port status is not intended to be changed from user space.
Prevent a user from mapping them as write or execute.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix unbalanced braces around else

Add missing braces around else blocks in a few places to make checkpatch
happy.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Convert %Lx to %llx

According to checkpatch %Lx is not standard C so remove it and use the
suggested %llx.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix misspelling in comment

Checkpatch flagged a misspelled word. Fix it.

Fixes: 8764522e5251 ("staging/rdma/hfi1: Unexpected link up pkey values are not an error")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Permanently enable P_Key checking in HFI

Ingress and egress port P_Key checking should always be performed for
HFIs. This patch will enable ingress and egress P_Key checking when
the port is initialized and will ignore the P_Key information sent by
the FM in the port info structure which is meant to be used only by the
switch.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Neel Desai <neel.desai@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Cache neighbor secure data after link up

Secure data is transferred across the link during verify
cap. This includes Neighbor Guid, Type, and Port Number.
This transfer is not guaranteed to complete until the 8051
firmware has completed processing of the state_complete
frame. Move the consumption of this data from verify cap
handling to link up handling to ensure the data is finalized.

Additionally, do not notify the SM that the link is up until
after this data is actually available.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Stuart Summers <john.s.summers@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Adjust high temperature warning for QSFP cable

When we receive a QSFP_HIGH_TEMP_ALARM or QSFP_HIGH_TEMP_WARNING
interrupt, print a "QSFP cable temperature too high" message.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Neel Desai <neel.desai@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix softlockup issue

Soft lockups can occur because the mad processing on different CPUs acquire
the spin lock dc8051_lock:

[534552.835870]  [<ffffffffa026f993>] ? read_dev_port_cntr.isra.37+0x23/0x160 [hfi1]
[534552.835880]  [<ffffffffa02775af>] read_dev_cntr+0x4f/0x60 [hfi1]
[534552.835893]  [<ffffffffa028d7cd>] pma_get_opa_portstatus+0x64d/0x8c0 [hfi1]
[534552.835904]  [<ffffffffa0290e7d>] hfi1_process_mad+0x48d/0x18c0 [hfi1]
[534552.835908]  [<ffffffff811dc1f1>] ? __slab_free+0x81/0x2f0
[534552.835936]  [<ffffffffa024c34e>] ? ib_mad_recv_done+0x21e/0xa30 [ib_core]
[534552.835939]  [<ffffffff811dd153>] ? __kmalloc+0x1f3/0x240
[534552.835947]  [<ffffffffa024c3fb>] ib_mad_recv_done+0x2cb/0xa30 [ib_core]
[534552.835955]  [<ffffffffa0237c85>] __ib_process_cq+0x55/0xd0 [ib_core]
[534552.835962]  [<ffffffffa0237d70>] ib_cq_poll_work+0x20/0x60 [ib_core]
[534552.835964]  [<ffffffff810a7f3b>] process_one_work+0x17b/0x470
[534552.835966]  [<ffffffff810a8d76>] worker_thread+0x126/0x410
[534552.835969]  [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460
[534552.835971]  [<ffffffff810b052f>] kthread+0xcf/0xe0
[534552.835974]  [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140
[534552.835977]  [<ffffffff81696418>] ret_from_fork+0x58/0x90
[534552.835980]  [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140

This issue is made worse when the 8051 is busy and the reads take longer.
Fix by using a non-spinning lock procure.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciszyn <mike.marciniszyn@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Prevent kernel QP post send hard lockups

The driver progress routines can call cond_resched() when
a timeslice is exhausted and irqs are enabled.

If the ULP had been holding a spin lock without disabling irqs and
the post send directly called the progress routine, the cond_resched()
could yield allowing another thread from the same ULP to deadlock
on that same lock.

Correct by replacing the current hfi1_do_send() calldown with a unique
one for post send and adding an argument to hfi1_do_send() to indicate
that the send engine is running in a thread.   If the routine is not
running in a thread, avoid calling cond_resched().

CC: <stable@vger.kernel.org> # 4.7.x-
Fixes: Commit 831464ce4b74 ("IB/hfi1: Don't call cond_resched in atomic mode when sending packets")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Use defines from common headers

Move FECN and BECN related defines to common header files

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Add functions to parse 9B headers

These inline functions improve code readability by
enabling callers to read specific fields from the
header without knowledge of byte offsets.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Rename hdr2sc to hfi1_9B_get_sc5

The function really returned the 5-bit sc value from
the header and rhf. hdr2sc didn't quite describe what it did.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Return SC2VL mappings to FM with VL15 instead of ILLEGAL_VL

VL15 in the SC2VL table is used to indicate an invalid SC
for the FM, however, internally the driver remaps SCs from
VL15 to ILLEGAL_VL to prevent error counts. This mapping
confuses the FM when performing a sweep, making it return
a table mismatch error. Have SMA convert ILLEGAL_VL
to VL15 entries for the SC2VL table queries.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Validate the TID count before using it

Improve the safety of the code by validating the user supplied
tidcnt before use.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt/hfi1/qib: Use the MGID and MLID for multicast addressing

The Infiniband spec defines "A multicast address is defined by a
MGID and a MLID" (section 10.5).

The current code only uses the MGID for identifying multicast groups.
Update the driver to be compliant with this definition.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: For multicast functions, verify that LIDs are multicast LIDs

The Infiniband spec defines "A multicast address is defined by a
MGID and a MLID" (section 10.5).  Currently the MLID value is not
validated.

Add check to verify that the MLID value is in the correct address
range.

Fixes: 0c33aeedb2cf ("[IB] Add checks to multicast attach and detach")
Cc: stable@vger.kernel.org
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Correct MulticastMask/CollectiveMask info to SMA output

The FM uses the values of MulticastMask and CollectiveMask to
determine the number of bits for net masks. The current values of
0 and 0 are incorrect.  The values should be 4 and 1.  Updated the
necessary code to reflect the specified values.

Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: If the MGID/MLID pair is not on the list return an error

A list of MGID/MLID pairs is built when doing a multicast attach.  When
the multicast detach is called, the list is searched, and regardless of
the search outcome, the driver detach is called.

If an MGID/MLID pair is not on the list, driver detach should not be
called, and an error should be returned.  Calling the driver without
removing an MGID/MLID pair from the list can leave the core and driver
out of sync.

Fixes: f4e401562c11 ("IB/uverbs: track multicast group membership for userspace QPs")
Cc: stable@vger.kernel.org
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib: use setup_timer

Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/nes: use setup_timer

Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/i40iw: use setup_timer

Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/nes: Fix incorrect type in assignment

Fix mismatch between types, wqe_words are in le32 format, while opcode
in CPU format.

The following sparse warnings are helped to find it:

drivers/infiniband/hw/nes/nes_hw.c:3058:24: warning: incorrect type in assignment (different base types)
drivers/infiniband/hw/nes/nes_hw.c:3058:24:    expected unsigned int [unsigned] [assigned] [usertype] opcode
drivers/infiniband/hw/nes/nes_hw.c:3058:24:    got restricted __le32 <noident>

CC: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/usnic: Simplify the code to balance loc/unlock calls

Simplify code in find_free_vf_and_create_qp_grp() to avoid sparse error
regarding call to unlock in the block other than lock was called.

drivers/infiniband/hw/usnic/usnic_ib_verbs.c:206:9: warning: context imbalance
in 'find_free_vf_and_create_qp_grp' - different lock
contexts for basic block

CC: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Ib/usnic: Explicitly include usnic headers

Sparse tool complains about undeclared symbols in usnic_ib_verbs.c
and usnic_ib_sysfs.c This is caused by lack of direct include of
appropriate usnic_ib_verbs.h and usnic_ib_sysfs.h, where all
these functions were declared.

Simple include eliminates 30 warnings similar to the below one:

drivers/infiniband/hw/usnic/usnic_ib_sysfs.c:304:6: warning: symbol
'usnic_ib_sysfs_unregister_usdev' was
not declared. Should it be static?

CC: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Ib/core: Mark local uverbs_std_types functions to be static

Functions declared in uverbs_std_types.c are local to that file, but
they lack static declarations. This produces a lot of sparse warnings,
like the one below:

drivers/infiniband/core/uverbs_std_types.c:41:5: warning: symbol
'uverbs_free_ah' was not declared.
Should it be static?

So mark them as static.

CC: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

iw_cxgb4: check return value of alloc_skb

Function alloc_skb() will return a NULL pointer when there is no enough
memory. However, the return value of alloc_skb() is directly used
without validation in function send_fw_pass_open_req(). This patches
checks the return value of alloc_skb() against NULL.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: fix typo: "algorithmi" -> "algorithm"

trivial fix to typo in pr_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: restore IRQs on error path in rvt_create_ah()

We need to call spin_unlock_irqrestore() instead of vanilla
spin_unlock() on this error path.

Fixes: 119a8e708d16 ("IB/rdmavt: Add AH to rdmavt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

infiniband: call ipv6 route lookup via the stub interface

The infiniband address handle can be triggered to resolve an ipv6
address in response to MAD packets, regardless of the ipv6
module being disabled via the kernel command line argument.

That will cause a call into the ipv6 routing code, which is not
initialized, and a conseguent oops.

This commit addresses the above issue replacing the direct lookup
call with an indirect one via the ipv6 stub, which is properly
initialized according to the ipv6 status (e.g. if ipv6 is
disabled, the routing lookup fails gracefully)

Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: add support for send+invalidate in poll CQ

Split the poll responder CQ into two functions.
Add support for send+invalidate in poll CQ.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: destroy CQ only after HW releases it

Wait for all relevant CNQ interrupts before freeing the CQ.
Don't invoke completion handlers for a destroyed CQ.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: enhance destroy flow for GSI QP

Avoid attempting to release irrelevant (and unused) resources for GSI QP.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: properly check atomic capabilities

After checking the path upwards towards root complex, actualy check
root complex atomic_req capability, and not our own NIC.
Verify that the PCIe device control register's atomic egress block
is cleared in the path.
Verify that the PCIe version is at least 2.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: reset access control when registering a MR

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/vmw_pvrdma: Spare annotate imm_data

imm_data is copied directly from the ib_send_wr and ib_wc which have
it marked as __be32, copy that mark into the uapi structures as well.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Adit Ranadive <aditr@vmware.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Add ODP support to MW

Internally MW implemented as KLM MKey and filled by userspace UMR
postsends.  Handle pagefault trigered by operations on this MKeys.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Extract page fault code

To make page fault handling code more flexible
split pagefault_single_data_segment() function.
Keep MR resolution in pagefault_single_data_segment() and
move actual updates into pagefault_single_mr().

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/umem: Add support to huge ODP

Add IB_ACCESS_HUGETLB ib_reg_mr flag.
Hugetlb region registered with this flag
will use single translation entry per huge page.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Add contiguous ODP support

Currenlty ODP supports only regular MMU pages.
Add ODP support for regions consisting of physically contiguous chunks
of arbitrary order (huge pages for instance) to improve performance.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/umem: Add contiguous ODP support

Currenlty ODP supports only regular MMU pages.
Add ODP support for regions consisting of physically contiguous chunks
of arbitrary order (huge pages for instance) to improve performance.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Decrease verbosity level of ODP errors

Decrease verbosity level of ODP error flows messages to debug level.
Remove one redundant print since debug level message already exists in
this flow.

Fixes: d9aaed838765 ('{net,IB}/mlx5: Refactor page fault handling')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Fix implicit MR GC

When implicit MR's leaf MKey becomes unused, i.e. when it's
last page being released my MMU invalidation it is marked as "dying"
and scheduled for release by garbage collector.
Currentle consequent page fault may remove "dying" flag.
Treat leaf MKey as non-existent once it was scheduled to removal
by GC.

Fixes: 81713d3788d2 ('IB/mlx5: Add implicit MR support')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Fix UMR size calculation

Translation table updates of large UMR may require multiple post send
operations. The last operations can be in various lengths, but current
code set them to be the same length.

Fixes: 7d0cc6edcc70 ('IB/mlx5: Add MR cache for large UMR regions')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Fix function updating xlt emergency path

In memory shortage path we fall back to use spare buffer.
mlx5_ib_update_xlt() called from ib_uverbs_reg_mr when ibmr.ucontext
not initialized yet.

Scenario how to test it:
1. trigger memory exhaustion so __get_free_pages(GFP_KERNEL, 4) will fail
2. register MR
3. there should be no kernel oops

Fixes: 7d0cc6edcc70 ('IB/mlx5: Add MR cache for large UMR regions')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB: Replace ib_umem page_size by page_shift

Size of pages are held by struct ib_umem in page_size field.

It is better to store it as an exponent, because page size by nature
is always power-of-two and used as a factor, divisor or ilog2's argument.

The conversion of page_size to be page_shift allows to have portable
code and avoid following error while compiling on ARM:

  ERROR: "__aeabi_uldivmod" [drivers/infiniband/core/ib_core.ko] undefined!

CC: Selvin Xavier <selvin.xavier@broadcom.com>
CC: Steve Wise <swise@chelsio.com>
CC: Lijun Ou <oulijun@huawei.com>
CC: Shiraz Saleem <shiraz.saleem@intel.com>
CC: Adit Ranadive <aditr@vmware.com>
CC: Dennis Dalessandro <dennis.dalessandro@intel.com>
CC: Ram Amrani <Ram.Amrani@Cavium.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Ram Amrani <Ram.Amrani@cavium.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: change the return type to void

The function ib_unregister_mad_agent always returns zero. And
this returned value is not checked. As such, chane the return
type to void.

CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

MAINTAINERS: Update ocrdma module status

Since ocrdma driver is not going to be updated with any
new development activity, except for critical bug fixes
reported by partners or customers, changing the module status
to "Odd Fixes". Also, updating the web page info and the
maintainers email addresses.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi: Fix up comments in engine mapping

Fix off by 1 error in comments documenting the sdma and send context
mappings.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

MAINTAINERS: Add file patterns for infiniband device tree bindings

Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

infiniband/uverbs: Fix integer overflows

The 'num_sge' variable is verfied to be smaller than the 'sge_count'
variable; however, since both are user-controlled it's possible to cause
an integer overflow for the kmalloc multiply on 32-bit platforms
(num_sge and sge_count are both defined u32). By crafting an input that
causes a smaller-than-expected allocation it's possible to write
controlled data out-of-bounds.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>

infiniband: hns: avoid gcc-7.0.1 warning for uninitialized data

hns_roce_v1_cq_set_ci() calls roce_set_bit() on an uninitialized field,
which will then change only a few of its bits, causing a warning with
the latest gcc:

infiniband/hw/hns/hns_roce_hw_v1.c: In function 'hns_roce_v1_cq_set_ci':
infiniband/hw/hns/hns_roce_hw_v1.c:1854:23: error: 'doorbell[1]' is used uninitialized in this function [-Werror=uninitialized]
  roce_set_bit(doorbell[1], ROCEE_DB_OTHERS_H_ROCEE_DB_OTH_HW_SYNS_S, 1);

The code is actually correct since we always set all bits of the
port_vlan field, but gcc correctly points out that the first
access does contain uninitialized data.

This initializes the field to zero first before setting the
individual bits.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/fmr_pool: Convert the cleanup thread into kthread worker API

Kthreads are currently implemented as an infinite loop. Each
has its own variant of checks for terminating, freezing,
awakening. In many cases it is unclear to say in which state
it is and sometimes it is done a wrong way.

The plan is to convert kthreads into kthread_worker or workqueues
API. It allows to split the functionality into separate operations.
It helps to make a better structure. Also it defines a clean state
where no locks are taken, IRQs blocked, the kthread might sleep
or even be safely migrated.

The kthread worker API is useful when we want to have a dedicated
single thread for the work. It helps to make sure that it is
available when needed. Also it allows a better control, e.g.
define a scheduling priority.

This patch converts the frm_pool kthread into the kthread worker
API because I am not sure how busy the thread is. It is well
possible that it does not need a dedicated kthread and workqueues
would be perfectly fine. Well, the conversion between kthread
worker API and workqueues is pretty trivial.

The patch moves one iteration from the kthread into the work function.
It is queued only when there is a pending work. Therefore we do not
need to compare flush_ser and req_ser at the beginning. On the contrary,
the same work could be queued only once at a time. Therefore it has to
re-queue itself if some requests are pending.

Otherwise, wake_up_process() is replaced by queuing the work.

Important: The change is only compile tested. I did not find an easy
way how to check it in a real life.

Signed-off-by: Petr Mladek <pmladek@suse.com>
TO: Doug Ledford <dledford@redhat.com>
CC: Sean Hefty <sean.hefty@intel.com>
CC: Hal Rosenstock <hal.rosenstock@gmail.com>
CC: linux-rdma@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

{net,IB}/{rxe,usnic}: Utilize generic mac to eui32 function

This logic seems to be duplicated in (at least) three separate files.
Move it to one place so code can be re-use.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>

IB/usnic: Remove unused functions

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/iser: fix spelling mistake: "unexepected" -> "unexpected"

trivial fix to spelling mistake in iser_err error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>

iw_cxgb4: Use dsgl by default

Enable the use of dsgl by default and determine whether dsgl is
supported from lld info.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Bharat Potnuri <bharat@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Use IS_ERR_OR_NULL where appropriate

Constructs such as if (ptr && !IS_ERR(ptr)) can be shorted to
just !IS_ERR_OR_NULL(ptr) instead.  Make substitutions in the bnxt_re
driver where appropriate.

Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: remove redundant initialization of rc to zero

rc is initialized to zero but is then updated by calls to
bnxt_qplib_free_fast_reg_page_list and/or bnxt_qpliob_free_mrw
so the initialization is redundant and can be removed.

Detected with CoverityScan, CID#1408448 ("Unused Value")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Add support for active_width and active_speed in RoCE

Add missing calculation and translation of active_width and
active_speed for RoCE.

Fixes: 3f89a643eb295 ('IB/mlx5: Extend query_device/port to ...')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Set mlx5_query_roce_port's return value to void

In case of an error, the properties reported to user
are zeroed out, so no need for a return value.

Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add HDR speed enum

Add high data rate speed to the ib_port_speed enumeration.

Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Set correct SL in completion for RoCE

There is a difference when parsing a completion entry between Ethernet
and IB ports. When link layer is Ethernet the bits describe the type of
L3 header in the packet. In the case when link layer is Ethernet and VLAN
header is present the value of SL is equal to the 3 UP bits in the VLAN
header. If VLAN header is not present then the SL is undefined and consumer
of the completion should check if IB_WC_WITH_VLAN is set.

While that, this patch also fills the vlan_id field in the completion if
present.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/cma: Send MRA for reply messages

Current implementation of RDMA_CM sends MRA (Message Receipt
Acknowledgment) only for request messages but not for response messages.

As a result, a slow active side of the connection may send a ready-to-use
message to the passive side in a delay that is too long for the passive
side to wait for.

This patch adds a call to ib_send_cm_mra() upon receiving a response
message and by this tells the other side to modify the service timeout
to a bigger value, 16 times than before. As in the request case, MRA
for reply will be sent only if a duplicate response has arrived.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Matan Barak <matan@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Support congestion related counters

This patch adds support to query the congestion related hardware counters
through new command and links them with other hw counters being available
in hw_counters sysfs location.

In order to reuse existing infrastructure it renames related q_counter
data structures to more generic counters to reflect q_counters and
congestion counters and maybe some other counters in the future.

New hardware counters:
 * rp_cnp_handled - CNP packets handled by the reaction point
 * rp_cnp_ignored - CNP packets ignored by the reaction point
 * np_cnp_sent    - CNP packets sent by notification point to respond to
                     CE marked RoCE packets
 * np_ecn_marked_roce_packets - CE marked RoCE packets received by
                                notification point

It also avoids returning ENOSYS which is specific for invalid
system call and produces the following checkpatch.pl warning.

WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+ return -ENOSYS;

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mthca: Check validity of output parameter pointer

The mthca driver didn't check supplied pointer to functions
mthca_cmd_poll() and mthca_cmd_wait(). This caused to the following
smatch errors:

drivers/infiniband/hw/mthca/mthca_cmd.c:371 mthca_cmd_poll() error: we previously assumed 'out_param' could be null (see line 353)
drivers/infiniband/hw/mthca/mthca_cmd.c:454 mthca_cmd_wait() error: we previously assumed 'out_param' could be null (see line 432)

In reality all callers of these functions are setting out_is_imm
flag are providing pointer too. However it is better to check
again to remove smatch errors to achieve warning free subsystem.

Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Add drop flow steering rule support

A drop rule is described by an action drop and no destination.
If a user specified IB_FLOW_SPEC_ACTION_DROP then set the action
to MLX5_FLOW_CONTEXT_ACTION_DROP and clear the destination.

Signed-off-by: Slava Shwartsman <slavash@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Introduce drop flow specification

This flow steering specification identifies flow for drop by the HW.
If user create a flow only with the drop specification,
then all the packets that hit this flow will be dropped, otherwise the HW
will drop only the packets that match the other L2/L3/L4 specifications.

Signed-off-by: Slava Shwartsman <slavash@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Use IP version matching to classify IP traffic

This change adds the ability for flow steering to classify IPv4/6
packets with MPLS tag (Ethertype 0x8847 and 0x8848) as standard IP
packets and hit IPv4/6 classifed steering rules.

When user added a flow rule with IP classification, driver was
implicitly adding ethertype matching to the created rule in order
to distinguish between IPv4 and IPv6 protocols.
Since IP packets with MPLS tag header have MPLS ethertype, they missed
the rule and ended up hitting the default filters.
Such behavior prevented from MPLS packets to undergo inbound traffic
load balancing flows (if such were defined by configuring RSS) to
achieve higher throughput - the way that non-MPLS IP packets performed.

Since our device is able to look past the MPLS tag and identify the
next protocol we introduce this solution which replaces Ethertype
matching by the device's capability to perform IP version parsing
and matching in order to distinguish between IPv4 and IPv6.
Therefore, whenever a flow with IP spec is added and device support IP
version matching, driver will implicitly add IP version matching to the
rule (Based on the IP spec type) without Ethertype matching which will
cause relevant MPLS tagged packets to hit this rule as well.
Otherwise (device doesn't support IP version matching), we fall back to
setting Ethertype matching.

If the user's filters specify an L2 ethertype and an IP spec
the rule will then match both the ethertype and the IP version.

The device's support for IP version matching is reported by the
device via dedicated capability bit in query_device_cap and named
outer/inner_ip_version.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Add inner spec and IPv6 validation in user's flow attribute list

This change fixes an incomplete validation of the user's
flow attributes list.

Previous implementation validated only matching of IPv4 Ethertype
to IPv4 spec of outer headers (in case both Ethernet with specified
Ethertype and IP specs were present) and lacked the validation of:
1. Matching of IPv6 Ethertype in Ethernet spec (if such exists) to an
   IPv6 protocol spec (if such exists).
2. Validation of Ethertype to IP protocol matching on inner headers specs.
Which could cause some combinations of unmatching Ethernet and IP
protocols to pass validation and apply on the device.

The fix adds validation of IPv6 Ethertype and IP spec as well as
performing the scan on both outer and inner attributes.

Fixes: 038d2ef87572 ("Add flow steering support")
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Fix wrong use of kfree at bad flow in create_cq_user

The kfree was called to free cqb, while it should free *cqb.

Fixes: 1cbe6fc86ccf ("IB/mlx5: Add support for CQE compressing")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Enlarge autogroup flow table

In order to enlarge the flow group size to 8k, we decrease
the number of flow group types to 6 and increase the flow
table size to 64k.

Flow group size is calculated as follow:
  group_size = table_size / (#group_types + 1)

Fixes: 038d2ef87572 ('IB/mlx5: Add flow steering support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Check supported flow table size

Check that the required flow table size is supported
by device. Return ENOMEM error if no space left.

In addition change the create flow table routine
to return ENOMEM instead of ENOSPC.

Fixes: 038d2ef87572 ('IB/mlx5: Add flow steering support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Change vma from shared to private

Anonymous VMA (->vm_ops == NULL) cannot be shared, otherwise
it would lead to SIGBUS.

Remove the shared flags from the vma after we change it to be
anonymous.

This is easily reproduced by doing modprobe -r while running a
user-space application such as raw_ethernet_bw.

Fixes: 7c2344c3bbf97 ('IB/mlx5: Implements disassociate_ucontext API')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Take write semaphore when changing the vma struct

When the driver disassociate user context, it changes the vma to
anonymous by setting the vm_ops to null and zap the vma ptes.

In order to avoid race in the kernel, we need to take write lock
before we change the vma entries.

Fixes: 7c2344c3bbf97 ('IB/mlx5: Implements disassociate_ucontext API')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx4: Change vma from shared to private

Anonymous VMA (->vm_ops == NULL) cannot be shared, otherwise
it would lead to SIGBUS.

Remove the shared flags from the vma after we change it to be
anonymous.

This is easily reproduced by doing modprobe -r while running a
user-space application such as raw_ethernet_bw.

Fixes: ae184ddeca5db ('IB/mlx4_ib: Disassociate support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx4: Take write semaphore when changing the vma struct

When the driver disassociate user context, it changes the vma to
anonymous by setting the vm_ops to null and zap the vma ptes.

In order to avoid race in the kernel, we need to take write lock
before we change the vma entries.

Fixes: ae184ddeca5db ('IB/mlx4_ib: Disassociate support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx4: Reduce SRIOV multicast cleanup warning message to debug level

A warning message during SRIOV multicast cleanup should have actually been
a debug level message. The condition generating the warning does no harm
and can fill the message log.

In some cases, during testing, some tests were so intense as to swamp the
message log with these warning messages, causing a stall in the console
message log output task. This stall caused an NMI to be sent to all CPUs
(so that they all dumped their stacks into the message log).
Aside from the message flood causing an NMI, the tests all passed.

Once the message flood which caused the NMI is removed (by reducing the
warning message to debug level), the NMI no longer occurs.

Sample message log (console log) output illustrating the flood and
resultant NMI (snippets with comments and modified with ... instead
of hex digits, to satisfy checkpatch.pl):

 <mlx4_ib> _mlx4_ib_mcg_port_cleanup: ... WARNING: group refcount 1!!!...
 *** About 4000 almost identical lines in less than one second ***
 <mlx4_ib> _mlx4_ib_mcg_port_cleanup: ... WARNING: group refcount 1!!!...
 INFO: rcu_sched detected stalls on CPUs/tasks: { 17} (...)
 *** { 17} above indicates that CPU 17 was the one that stalled ***
 sending NMI to all CPUs:
 ...
 NMI backtrace for cpu 17
 CPU: 17 PID: 45909 Comm: kworker/17:2
 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 09/08/2013
 Workqueue: events fb_flashcursor
 task: ffff880478...... ti: ffff88064e...... task.ti: ffff88064e......
 RIP: 0010:[ffffffff81......]  [ffffffff81......] io_serial_in+0x15/0x20
 RSP: 0018:ffff88064e257cb0  EFLAGS: 00000002
 RAX: 0000000000...... RBX: ffffffff81...... RCX: 0000000000......
 RDX: 0000000000...... RSI: 0000000000...... RDI: ffffffff81......
 RBP: ffff88064e...... R08: ffffffff81...... R09: 0000000000......
 R10: 0000000000...... R11: ffff88064e...... R12: 0000000000......
 R13: 0000000000...... R14: ffffffff81...... R15: 0000000000......
 FS:  0000000000......(0000) GS:ffff8804af......(0000) knlGS:000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080......
 CR2: 00007f2a2f...... CR3: 0000000001...... CR4: 0000000000......
 DR0: 0000000000...... DR1: 0000000000...... DR2: 0000000000......
 DR3: 0000000000...... DR6: 00000000ff...... DR7: 0000000000......
 Stack:
 ffff88064e...... ffffffff81...... ffffffff81...... 0000000000......
 ffffffff81...... ffff88064e...... ffffffff81...... ffffffff81......
 ffffffff81...... ffff88064e...... ffffffff81...... 0000000000......
 Call Trace:
[<ffffffff813d099b>] wait_for_xmitr+0x3b/0xa0
[<ffffffff813d0b5c>] serial8250_console_putchar+0x1c/0x30
[<ffffffff813d0b40>] ? serial8250_console_write+0x140/0x140
[<ffffffff813cb5fa>] uart_console_write+0x3a/0x80
[<ffffffff813d0aae>] serial8250_console_write+0xae/0x140
[<ffffffff8107c4d1>] call_console_drivers.constprop.15+0x91/0xf0
[<ffffffff8107d6cf>] console_unlock+0x3bf/0x400
[<ffffffff813503cd>] fb_flashcursor+0x5d/0x140
[<ffffffff81355c30>] ? bit_clear+0x120/0x120
[<ffffffff8109d5fb>] process_one_work+0x17b/0x470
[<ffffffff8109e3cb>] worker_thread+0x11b/0x400
[<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400
[<ffffffff810a5aef>] kthread+0xcf/0xe0
[<ffffffff810a5a20>] ? kthread_create_on_node+0x140/0x140
[<ffffffff81645858>] ret_from_fork+0x58/0x90
[<ffffffff810a5a20>] ? kthread_create_on_node+0x140/0x140
Code: 48 89 e5 d3 e6 48 63 f6 48 03 77 10 8b 06 5d c3 66 0f 1f 44 00 00 66 66 66 6

As indicated in the stack trace above, the console output task got swamped.

Fixes: b9c5d6a64358 ("IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV")
Cc: <stable@vger.kernel.org> # v3.6+
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx4: Fix ib device initialization error flow

In mlx4_ib_add, procedure mlx4_ib_alloc_eqs is called to allocate EQs.

However, in the mlx4_ib_add error flow, procedure mlx4_ib_free_eqs is not
called to free the allocated EQs.

Fixes: e605b743f33d ("IB/mlx4: Increase the number of vectors (EQs) available for ULPs")
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx4: Support RAW Ethernet when RoCE is disabled

On some environments, such as certain SR-IOV VF configurations, RoCE
isn't supported for mlx4 Ethernet ports. Currently the driver will
not open IB device on that port.

This is problematic since we do want user-space RAW Ethernet QPs functionality
to remain in place. For that end, enhance the relevant driver flows such that we
do create a device instance in that case.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Fix sysfs registration error flow

The kernel commit cited below restructured ib device management
so that the device kobject is initialized in ib_alloc_device.

As part of the restructuring, the kobject is now initialized in
procedure ib_alloc_device, and is later added to the device hierarchy
in the ib_register_device call stack, in procedure
ib_device_register_sysfs (which calls device_add).

However, in the ib_device_register_sysfs error flow, if an error
occurs following the call to device_add, the cleanup procedure
device_unregister is called. This call results in the device object
being deleted -- which results in various use-after-free crashes.

The correct cleanup call is device_del -- which undoes device_add
without deleting the device object.

The device object will then (correctly) be deleted in the
ib_register_device caller's error cleanup flow, when the caller invokes
ib_dealloc_device.

Fixes: 55aeed06544f6 ("IB/core: Make ib_alloc_device init the kobject")
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Fix kernel crash during fail to initialize device

This patch fixes the kernel crash that occurs during ib_dealloc_device()
called due to provider driver fails with an error after
ib_alloc_device() and before it can register using ib_register_device().

This crashed seen in tha lab as below which can occur with any IB device
which fails to perform its device initialization before invoking
ib_register_device().

This patch avoids touching cache and port immutable structures if device
is not yet initialized.
It also releases related memory when cache and port immutable data
structure initialization fails during register_device() state.

[81416.561946] BUG: unable to handle kernel NULL pointer dereference at (null)
[81416.570340] IP: ib_cache_release_one+0x29/0x80 [ib_core]
[81416.576222] PGD 78da66067
[81416.576223] PUD 7f2d7c067
[81416.579484] PMD 0
[81416.582720]
[81416.587242] Oops: 0000 [#1] SMP
[81416.722395] task: ffff8807887515c0 task.stack: ffffc900062c0000
[81416.729148] RIP: 0010:ib_cache_release_one+0x29/0x80 [ib_core]
[81416.735793] RSP: 0018:ffffc900062c3a90 EFLAGS: 00010202
[81416.741823] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[81416.749785] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff880859fec000
[81416.757757] RBP: ffffc900062c3aa0 R08: ffff8808536e5ac0 R09: ffff880859fec5b0
[81416.765708] R10: 00000000536e5c01 R11: ffff8808536e5ac0 R12: ffff880859fec000
[81416.773672] R13: 0000000000000000 R14: ffff8808536e5ac0 R15: ffff88084ebc0060
[81416.781621] FS:  00007fd879fab740(0000) GS:ffff88085fac0000(0000) knlGS:0000000000000000
[81416.790522] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[81416.797094] CR2: 0000000000000000 CR3: 00000007eb215000 CR4: 00000000003406e0
[81416.805051] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[81416.812997] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[81416.820950] Call Trace:
[81416.824226]  ib_device_release+0x1e/0x40 [ib_core]
[81416.829858]  device_release+0x32/0xa0
[81416.834370]  kobject_cleanup+0x63/0x170
[81416.839058]  kobject_put+0x25/0x50
[81416.843319]  ib_dealloc_device+0x25/0x40 [ib_core]
[81416.848986]  mlx5_ib_add+0x163/0x1990 [mlx5_ib]
[81416.854414]  mlx5_add_device+0x5a/0x160 [mlx5_core]
[81416.860191]  mlx5_register_interface+0x8d/0xc0 [mlx5_core]
[81416.866587]  ? 0xffffffffa09e9000
[81416.870816]  mlx5_ib_init+0x15/0x17 [mlx5_ib]
[81416.876094]  do_one_initcall+0x51/0x1b0
[81416.880861]  ? __vunmap+0x85/0xd0
[81416.885113]  ? kmem_cache_alloc_trace+0x14b/0x1b0
[81416.890768]  ? vfree+0x2e/0x70
[81416.894762]  do_init_module+0x60/0x1fa
[81416.899441]  load_module+0x15f6/0x1af0
[81416.904114]  ? __symbol_put+0x60/0x60
[81416.908709]  ? ima_post_read_file+0x3d/0x80
[81416.913828]  ? security_kernel_post_read_file+0x6b/0x80
[81416.920006]  SYSC_finit_module+0xa6/0xf0
[81416.924888]  SyS_finit_module+0xe/0x10
[81416.929568]  entry_SYSCALL_64_fastpath+0x1a/0xa9
[81416.935089] RIP: 0033:0x7fd879494949
[81416.939543] RSP: 002b:00007ffdbc1b4e58 EFLAGS: 00000202 ORIG_RAX: 0000000000000139
[81416.947982] RAX: ffffffffffffffda RBX: 0000000001b66f00 RCX: 00007fd879494949
[81416.955965] RDX: 0000000000000000 RSI: 000000000041a13c RDI: 0000000000000003
[81416.963926] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000001b652a0
[81416.971861] R10: 0000000000000003 R11: 0000000000000202 R12: 00007ffdbc1b3e70
[81416.979763] R13: 00007ffdbc1b3e50 R14: 0000000000000005 R15: 0000000000000000
[81417.008005] RIP: ib_cache_release_one+0x29/0x80 [ib_core] RSP: ffffc900062c3a90
[81417.016045] CR2: 0000000000000000

Fixes: 55aeed0654 ("IB/core: Make ib_alloc_device init the kobject")
Fixes: 7738613e7c ("IB/core: Add per port immutable struct to ib_device")
Cc: <stable@vger.kernel.org> # v4.2+
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/ipoib: Fix deadlock between ipoib_stop and mcast join flow

Before calling ipoib_stop, rtnl_lock should be taken, then
the flow clears the IPOIB_FLAG_ADMIN_UP and IPOIB_FLAG_OPER_UP
flags, and waits for mcast completion if IPOIB_MCAST_FLAG_BUSY
is set.

On the other hand, the flow of multicast join task initializes
a mcast completion, sets the IPOIB_MCAST_FLAG_BUSY and calls
ipoib_mcast_join. If IPOIB_FLAG_OPER_UP flag is not set, this
call returns EINVAL without setting the mcast completion and
leads to a deadlock.

    ipoib_stop                          |
        |                               |
    clear_bit(IPOIB_FLAG_ADMIN_UP)      |
        |                               |
    Context Switch                      |
        |                       ipoib_mcast_join_task
        |                               |
        |                       spin_lock_irq(lock)
        |                               |
        |                       init_completion(mcast)
        |                               |
        |                       set_bit(IPOIB_MCAST_FLAG_BUSY)
        |                               |
        |                       Context Switch
        |                               |
    clear_bit(IPOIB_FLAG_OPER_UP)       |
        |                               |
    spin_lock_irqsave(lock)             |
        |                               |
    Context Switch                      |
        |                       ipoib_mcast_join
        |                       return (-EINVAL)
        |                               |
        |                       spin_unlock_irq(lock)
        |                               |
        |                       Context Switch
        |                               |
    ipoib_mcast_dev_flush               |
    wait_for_completion(mcast)          |

ipoib_stop will wait for mcast completion for ever, and will
not release the rtnl_lock. As a result panic occurs with the
following trace:

    [13441.639268] Call Trace:
    [13441.640150]  [<ffffffff8168b579>] schedule+0x29/0x70
    [13441.641038]  [<ffffffff81688fc9>] schedule_timeout+0x239/0x2d0
    [13441.641914]  [<ffffffff810bc017>] ? complete+0x47/0x50
    [13441.642765]  [<ffffffff810a690d>] ? flush_workqueue_prep_pwqs+0x16d/0x200
    [13441.643580]  [<ffffffff8168b956>] wait_for_completion+0x116/0x170
    [13441.644434]  [<ffffffff810c4ec0>] ? wake_up_state+0x20/0x20
    [13441.645293]  [<ffffffffa05af170>] ipoib_mcast_dev_flush+0x150/0x190 [ib_ipoib]
    [13441.646159]  [<ffffffffa05ac967>] ipoib_ib_dev_down+0x37/0x60 [ib_ipoib]
    [13441.647013]  [<ffffffffa05a4805>] ipoib_stop+0x75/0x150 [ib_ipoib]

Fixes: 08bc327629cb ("IB/ipoib: fix for rare multicast join race condition")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/ipoib: Update broadcast object if PKey value was changed in index 0

Update the broadcast address in the priv->broadcast object when the
Pkey value changes in index 0, otherwise the multicast GID value will
keep the previous value of the PKey, and will not be updated.
This leads to interface state down because the interface will keep the
old PKey value.

For example, in SR-IOV environment, if the PF changes the value of PKey
index 0 for one of the VFs, then the VF receives PKey change event that
triggers heavy flush. This flush calls update_parent_pkey that update the
broadcast object and its relevant members. If in this case the multicast
GID will not be updated, the interface state will be down.

Fixes: c2904141696e ("IPoIB: Fix pkey change flow for virtualization environments")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: Cache dst in QP instead of getting it for each send

In RC QP there is no need to resolve the outgoing interface
for each packet, as this does not change during QP life cycle.

Instead cache the interface on the socket and use that one.
This improves performance by 12% by sparing redundant
calls to rxe_find_route.

ib_send_bw -d rxe0  -x 1 -n 9000 -e  -s $((1024 * 1024 )) -l 100

----------------------------------------------------------------------------------------
|        | bytes   | iterations | BW peak[MB/sec] | BW average[MB/sec] | MsgRate[Mpps] |
----------------------------------------------------------------------------------------
| before | 1048576 | 9000       | inf             | 551.21             | 0.000551      |
| after  | 1048576 | 9000       | inf             | 615.54             | 0.000616      |
----------------------------------------------------------------------------------------

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: Offload CRC calculation when possible

Use CPU ability to perform CRC calculations, by
replacing direct calls to crc32_le() with crypto_shash_updata().

The overall performance gain measured with ib_send_bw tool is 10% and it
was tested on "Intel CPU ES-2660 v2 @ 2.20Ghz" CPU.

ib_send_bw -d rxe0  -x 1 -n 9000 -e  -s $((1024 * 1024 )) -l 100

---------------------------------------------------------------------------------------------
|             | bytes   | iterations | BW peak[MB/sec] | BW average[MB/sec] | MsgRate[Mpps] |
---------------------------------------------------------------------------------------------
| crc32_le    | 1048576 | 9000       | inf             | 497.60             | 0.000498      |
| CRC offload | 1048576 | 9000       | inf             | 546.70             | 0.000547      |
---------------------------------------------------------------------------------------------

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: Do not export module's private function

Function rxe_rcv is used internally in RXE and don't need to be
exported. This patch removes such export declaration.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: Avoid accessing timers for non RC QPs

This patch avoids RNR NAK timer and retransmit timer initialization and
cleanup for non RC QPs (such as UD QP, GSI QP).

Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: Add port protocol stats

Expose new counters using the get_hw_stats callback.
We expose the following counters:

+---------------------+----------------------------------------+
|      Name           |           Description                  |
|---------------------+----------------------------------------|
|sent_pkts            | number of sent pkts                    |
|---------------------+----------------------------------------|
|rcvd_pkts            | number of received packets             |
|---------------------+----------------------------------------|
|out_of_sequence      | number of errors due to packet         |
|                     | transport sequence number              |
|---------------------+----------------------------------------|
|duplicate_request    | number of received duplicated packets. |
|                     | A request that previously executed is  |
|                     | named duplicated.                      |
|---------------------+----------------------------------------|
|rcvd_rnr_err         | number of received RNR by completer    |
|---------------------+----------------------------------------|
|send_rnr_err         | number of sent RNR by responder        |
|---------------------+----------------------------------------|
|rcvd_seq_err         | number of out of sequence packets      |
|                     | received                               |
|---------------------+----------------------------------------|
|ack_deffered         | number of deferred handling of ack     |
|                     | packets.                               |
|---------------------+----------------------------------------|
|retry_exceeded_err   | number of times retry exceeded         |
|---------------------+----------------------------------------|
|completer_retry_err  | number of times completer decided to   |
|                     | retry                                  |
|---------------------+----------------------------------------|
|send_err             | number of failed send packet           |
+---------------------+----------------------------------------+

Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

cxgb4: Convert PDBG to pr_debug the second

A couple spots were missed in the original patch to implement this
change.  Add those spots.

Fixes: a9a42886d0b3 (cxgb4: Convert PDBG to pr_debug)
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hns: Use kcalloc() in hns_roce_buddy_init()

* Multiplications for the size determination of memory allocations
  indicated that array data structures should be processed.
  Thus use the corresponding function "kcalloc".

  This issue was detected by using the Coccinelle software.

* Replace the specification of data types by pointer dereferences
  to make the corresponding size determinations a bit safer according to
  the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hns: Use kmalloc_array() in hns_roce_cmd_use_events()

* A multiplication for the size determination of a memory allocation
  indicated that an array data structure should be processed.
  Thus use the corresponding function "kmalloc_array".

  This issue was detected by using the Coccinelle software.

* Replace the specification of a data structure by a pointer dereference
  to make the corresponding size determination a bit safer according to
  the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>