review.tizen.org Git - platform/kernel/linux-exynos.git/log

hwmon: (coretemp) Use proper error codes in cpu online callback

The cpu online callback returns success unconditionally even when the
device has no support, micro code mismatches or device allocation fails.
Only if CPU_HOTPLUG is disabled, the init function checks whether the
device list is empty and removes the driver.

This does not make sense. If CPU HOTPLUG is enabled then there is no point
to keep the driver around when it failed to initialize on the already
online cpus. The chance that not yet online CPUs will provide a functional
interface later is very close to zero.

Add proper error return codes, so the setup of the cpu hotplug states fails
when the device cannot be initialized and remove all the magic cruft.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (coretemp) Convert to hotplug state machine

Install the callbacks via the state machine. Setup and teardown are handled
by the hotplug core.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-hwmon@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: rt@linuxtronix.de
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20161117183541.8588-5-bigeasy@linutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (coretemp) Avoid redundant lookups

No point in looking up the same thing over and over.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (coretemp) Simplify sibling management

The coretemp driver provides a sysfs interface per physical core. If
hyperthreading is enabled and one of the siblings goes offline the sysfs
interface is removed and then immeditately created again for the
sibling. The only difference of them is the target cpu for the
rdmsr_on_cpu() in the sysfs show functions.

It's way simpler to keep a cpumask of cpus which are active in a package
and only remove the interface when the last sibling goes offline. Otherwise
just move the target cpu for the sysfs show functions to the still online
sibling.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (coretemp) Fixup target cpu for package when cpu is offlined

When a CPU is offlined nothing checks whether it is the target CPU for the
package temperature sysfs interface.

As a consequence all future readouts of the package temperature return
crap:

90000

which is Tjmax of that package.

Check whether the outgoing CPU is the target for the package and assign it
to some other still online CPU in the package. Protect the change against
the rdmsr_on_cpu() in show_crit_alarm().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (smsc47m192) Fix overflows seen when writing into limit attributes

Module test reports overflows when writing into temperature and voltage
limit attributes

temp1_min: Suspected overflow: [127000 vs. 0]
temp1_max: Suspected overflow: [127000 vs. 0]
temp1_offset: Suspected overflow: [127000 vs. 0]
temp2_min: Suspected overflow: [127000 vs. 0]
temp2_max: Suspected overflow: [127000 vs. 0]
temp2_offset: Suspected overflow: [127000 vs. 0]
temp3_min: Suspected overflow: [127000 vs. 0]
temp3_max: Suspected overflow: [127000 vs. 0]
temp3_offset: Suspected overflow: [127000 vs. 0]
in0_min: Suspected overflow: [3320 vs. 0]
in0_max: Suspected overflow: [3320 vs. 0]
in4_min: Suspected overflow: [15938 vs. 0]
in4_max: Suspected overflow: [15938 vs. 0]
in6_min: Suspected overflow: [1992 vs. 0]
in6_max: Suspected overflow: [1992 vs. 0]
in7_min: Suspected overflow: [2391 vs. 0]
in7_max: Suspected overflow: [2391 vs. 0]

The problem is caused by conversions from unsigned long to long and
from long to int.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (ds620) Fix overflows seen when writing temperature limits

Module test reports:

temp1_max: Suspected overflow: [160000 vs. 0]
temp1_min: Suspected overflow: [160000 vs. 0]

This is seen because the values passed when writing temperature limits
are unbound.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Fixes: 6099469805c2 ("hwmon: Support for Dallas Semiconductor DS620")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (adm9240) Fix overflows seen when writing into limit attributes

Module test reports:

in0_min: Suspected overflow: [3320 vs. 0]
in0_max: Suspected overflow: [3320 vs. 0]
in4_min: Suspected overflow: [15938 vs. 0]
in4_max: Suspected overflow: [15938 vs. 0]
temp1_max: Suspected overflow: [127000 vs. 0]
temp1_max_hyst: Suspected overflow: [127000 vs. 0]
aout_output: Suspected overflow: [1250 vs. 0]

Code analysis reveals that the overflows are caused by conversions
from unsigned long to long to int, combined with multiplications on
passed values.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (adt7411) update to new hwmon registration API

This is also a preparation for to support more properties like min, max and
alarm.

Signed-off-by: Michael Walle <michael@walle.cc>
[groeck: Minor alignment changes]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (via-cputemp) Remove pointless CPU check on each CPU

The check loop for the cpu type is pointless as we already have a cpu model
match before that. The only thing which is not covered by that check would
be a smp system with two different cores. Not likely to happen.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (mcp3021) add devicetree support

Support setting the reference voltage from the device tree.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (mcp3021) replace S_IRUGO with 0444

Replace S_IRUGO with the better readable 0444.
This fixes a checkpatch warning.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (mcp3021) add devicetree bindings documentation

Document the devicetree bindings for the Microchip MCP3021/3221.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (lm87) Use hwmon to create the sysfs groups

This is the expected thing for a hwmon driver to do, this changes
the sysfs paths from, say:

/sys/bus/i2c/devices/0-002c/temp1_input

to:

/sys/bus/i2c/devices/0-002c/hwmon/hwmon0/temp1_input

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (adm1275) Enable adm1278 VOUT sampling

The adm1278 can optionally monitor the VOUT pin. This functionality is
not enabled at reset, so PMON_CONFIG needs to be modified in order to
enable it.

Signed-off-by: Yi Li <adamliyi@msn.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: Add tc654 driver

Add support for the tc654 and tc655 fan controllers from Microchip.

http://ww1.microchip.com/downloads/en/DeviceDoc/20001734C.pdf

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
[groeck: Fixed continuation line alignments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (amc6821) sign extension temperature

Converts the unsigned temperature values from the i2c read
to be sign extended as defined in the datasheet so that
negative temperatures are properly read.

Fixes: 28e6274d8fa67 ("hwmon: (amc6821) Avoid forward declaration")
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[groeck: Dropped unnecessary continuation line]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (scpi) Fix module autoload

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/hwmon/scpi-hwmon.ko | grep alias
$

After this patch:

$ modinfo drivers/hwmon/scpi-hwmon.ko | grep alias
alias: of:N*T*Carm,scpi-sensorsC*
alias: of:N*T*Carm,scpi-sensors

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fixes: ea98b29a05e9c ("hwmon: Support sensors exported via ARM SCP interface")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Linux 4.9-rc7

Merge git://git.infradead.org/intel-iommu

Pull IOMMU fixes from David Woodhouse:
"Two minor fixes.

  The first fixes the assignment of SR-IOV virtual functions to the
  correct IOMMU unit, and the second fixes the excessively large (and
  physically contiguous) PASID tables used with SVM"

* git://git.infradead.org/intel-iommu:
  iommu/vt-d: Fix PASID table allocation
  iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions

Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.9:

   - Fix unreadable output in __do_page_fault due to the KERN_CONT
     patchset

   - Correctly handle MIPS R6 fixes to the c0_wired register"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: mm: Fix output of __do_page_fault
  MIPS: Mask out limit field when calculating wired entry count

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull vfs splice fix from Al Viro.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix default_file_splice_read()

fix default_file_splice_read()

Botched calculation of number of pages. As the result,
we were dropping pieces when doing splice to pipe from
e.g. 9p.

Reported-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"Here is a revert and two bugfixes for the I2C designware driver.

  Please note that we are still hunting down a regression for the
  i2c-octeon driver. While there is a fix pending, we have unclear
  feedback from the testers currently. An rc8 would be quite helpful
  for this case"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: designware: do not disable adapter after transfer"
  i2c: designware: fix rx fifo depth tracking
  i2c: designware: report short transfers

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fix from Russell King:
"This resolves the ksyms issues by reverting the commit which
introduced the breakage"

There was what I consider to be a better fix, but it's late in the rc
game, so I'll take the revert.

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
Revert "arm: move exports to definitions"

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix leak in fsl/fman driver, from Dan Carpenter.

2) Call flow dissector initcall earlier than any networking driver can
    register and start to use it, from Eric Dumazet.

3) Some dup header fixes from Geliang Tang.

4) TIPC link monitoring compat fix from Jon Paul Maloy.

5) Link changes require EEE re-negotiation in bcm_sf2 driver, from
    Florian Fainelli.

6) Fix bogus handle ID passed into tfilter_notify_chain(), from Roman
    Mashak.

7) Fix dump size calculation in rtnl_calcit(), from Zhang Shengju.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  tipc: resolve connection flow control compatibility problem
  mvpp2: use correct size for memset
  net/mlx5: drop duplicate header delay.h
  net: ieee802154: drop duplicate header delay.h
  ibmvnic: drop duplicate header seq_file.h
  fsl/fman: fix a leak in tgec_free()
  net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGS
  tipc: improve sanity check for received domain records
  tipc: fix compatibility bug in link monitoring
  net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implemented
  dwc_eth_qos: drop duplicate headers
  net sched filters: fix filter handle ID in tfilter_notify_chain()
  net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link change
  bnxt: do not busy-poll when link is down
  udplite: call proper backlog handlers
  ipv6: bump genid when the IFA_F_TENTATIVE flag is clear
  net/mlx4_en: Free netdev resources under state lock
  net: revert "net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit"
  rtnetlink: fix the wrong minimal dump size getting from rtnl_calcit()
  bnxt_en: Fix a VXLAN vs GENEVE issue
  ...

Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:

- Fix a crash that occurs at driver initialization if the memory region
   is already busy (request_mem_region() fails).

- Fix a vma validation check that mistakenly allows a private device-
   dax mapping to be established. Device-dax explicitly forbids private
   mappings so it can guarantee a given fault granularity and backing
   memory type.

Both of these fixes have soaked in -next and are tagged for -stable.

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fail all private mapping attempts
  device-dax: check devm_nsio_enable() return value

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
"Four fixes for bugs found by syzkaller on x86, all for stable"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: check for pic and ioapic presence before use
  KVM: x86: fix out-of-bounds accesses of rtc_eoi map
  KVM: x86: drop error recovery in em_jmp_far and em_ret_far
  KVM: x86: fix out-of-bounds access in lapic

Merge tag 'powerpc-4.9-6' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Fixes marked for stable:
   - Set missing wakeup bit in LPCR on POWER9
   - Fix the early OPAL console wrappers
   - Fixup kernel read only mapping

  Fixes for code merged this cycle:
   - Fix missing CRCs, add more asm-prototypes.h declarations"

* tag 'powerpc-4.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fixup kernel read only mapping
  powerpc/boot: Fix the early OPAL console wrappers
  powerpc: Fix missing CRCs, add more asm-prototypes.h declarations
  powerpc: Set missing wakeup bit in LPCR on POWER9

tipc: resolve connection flow control compatibility problem

In commit 10724cc7bb78 ("tipc: redesign connection-level flow control")
we replaced the previous message based flow control with one based on
1k blocks. In order to ensure backwards compatibility the mechanism
falls back to using message as base unit when it senses that the peer
doesn't support the new algorithm. The default flow control window,
i.e., how many units can be sent before the sender blocks and waits
for an acknowledge (aka advertisement) is 512. This was tested against
the previous version, which uses an acknowledge frequency of on ack per
256 received message, and found to work fine.

However, we missed the fact that versions older than Linux 3.15 use an
acknowledge frequency of 512, which is exactly the limit where a 4.6+
sender will stop and wait for acknowledge. This would also work fine if
it weren't for the fact that if the first sent message on a 4.6+ server
side is an empty SYNACK, this one is also is counted as a sent message,
while it is not counted as a received message on a legacy 3.15-receiver.
This leads to the sender always being one step ahead of the receiver, a
scenario causing the sender to block after 512 sent messages, while the
receiver only has registered 511 read messages. Hence, the legacy
receiver is not trigged to send an acknowledge, with a permanently
blocked sender as result.

We solve this deadlock by simply allowing the sender to send one more
message before it blocks, i.e., by a making minimal change to the
condition used for determining connection congestion.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mvpp2: use correct size for memset

gcc-7 detects a short memset in mvpp2, introduced in the original
merge of the driver:

drivers/net/ethernet/marvell/mvpp2.c: In function 'mvpp2_cls_init':
drivers/net/ethernet/marvell/mvpp2.c:3296:2: error: 'memset' used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]

The result seems to be that we write uninitialized data into the
flow table registers, although we did not get any warning about
that uninitialized data usage.

Using sizeof() lets us initialize then entire array instead.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: drop duplicate header delay.h

Drop duplicate header delay.h from mlx5/core/main.c.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Matan Barak <matanb@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ieee802154: drop duplicate header delay.h

Drop duplicate header delay.h from adf7242.c.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: drop duplicate header seq_file.h

Drop duplicate header seq_file.h from ibmvnic.c.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fsl/fman: fix a leak in tgec_free()

We set "tgec->cfg" to NULL before passing it to kfree(). There is no
need to set it to NULL at all. Let's just delete it.

Fixes: 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGS

The ETHTOOL_GLINKSETTINGS command is deprecating the ETHTOOL_GSET
command and likewise it shouldn't require the CAP_NET_ADMIN capability.

Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: improve sanity check for received domain records

In commit 35c55c9877f8 ("tipc: add neighbor monitoring framework") we
added a data area to the link monitor STATE messages under the
assumption that previous versions did not use any such data area.

For versions older than Linux 4.3 this assumption is not correct. In
those version, all STATE messages sent out from a node inadvertently
contain a 16 byte data area containing a string; -a leftover from
previous RESET messages which were using this during the setup phase.
This string serves no purpose in STATE messages, and should no be there.

Unfortunately, this data area is delivered to the link monitor
framework, where a sanity check catches that it is not a correct domain
record, and drops it. It also issues a rate limited warning about the
event.

Since such events occur much more frequently than anticipated, we now
choose to remove the warning in order to not fill the kernel log with
useless contents. We also make the sanity check stricter, to further
reduce the risk that such data is inavertently admitted.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix compatibility bug in link monitoring

commit 817298102b0b ("tipc: fix link priority propagation") introduced a
compatibility problem between TIPC versions newer than Linux 4.6 and
those older than Linux 4.4. In versions later than 4.4, link STATE
messages only contain a non-zero link priority value when the sender
wants the receiver to change its priority. This has the effect that the
receiver resets itself in order to apply the new priority. This works
well, and is consistent with the said commit.

However, in versions older than 4.4 a valid link priority is present in
all sent link STATE messages, leading to cyclic link establishment and
reset on the 4.6+ node.

We fix this by adding a test that the received value should not only
be valid, but also differ from the current value in order to cause the
receiving link endpoint to reset.

Reported-by: Amar Nv <amar.nv005@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implemented

The mvneta driver advertises it supports IFF_UNICAST_FLT. However, it
actually does not. The hardware probably does support it, but there is
no code to configure the filter. As a quick and simple fix, remove the
flag. This will cause the core to fall back to promiscuous mode.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: b50b72de2f2f ("net: mvneta: enable features before registering the driver")
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'parisc-4.9-4' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:
"On parisc we were still seeing occasional random segmentation faults
  and memory corruption on SMP machines. Dave Anglin then looked again
  at the TLB related code and found two issues in the PCI DMA and
  generic TLB flush functions.

  Then, in our startup code we had some timing of the cache and TLB
  functions to calculate a threshold when to use a complete TLB/cache
  flush or just to flush a specific range. This code produced a race
  with newly started CPUs and thus lead to occasional kernel crashes
  (due to stale TLB/cache entries). The patch by Dave fixes this issue
  by flushing the local caches before starting secondary CPUs and by
  removing the race.

  The last problem fixed by this series is that we quite often suffered
  from hung tasks and self-detected stalls on the CPUs. It was somehow
  clear that this was related to the (in v4.7) newly introduced cr16
  clocksource and the own implementation of sched_clock(). I replaced
  the open-coded sched_clock() function and switched to the generic
  sched_clock() implementation which seems to have fixed this isse as
  well.

  All patches have been sucessfully tested on a variety of machines,
  including our debian buildd servers.

  All patches (beside the small pr_cont fix) are tagged for stable
  releases"

* 'parisc-4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Also flush data TLB in flush_icache_page_asm
  parisc: Fix race in pci-dma.c
  parisc: Switch to generic sched_clock implementation
  parisc: Fix races in parisc_setup_cache_timing()
  parisc: Fix printk continuations in system detection

Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

Pull keys fixes from James Morris:
"From David:

   - Fix mpi_powm()'s handling of a number with a zero exponent
     [CVE-2016-8650].

     Integrate my and Andrey's patches for mpi_powm() and use
     mpi_resize() instead of RESIZE_IF_NEEDED() - the latter adds a
     duplicate check into the execution path of a trivial case we
     don't normally expect to be taken.

   - Fix double free in X.509 error handling"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]
  X.509: Fix double free in x509_cert_parse() [ver #3]

Fix subtle CONFIG_MODVERSIONS problems

CONFIG_MODVERSIONS has been broken for pretty much the whole 4.9 series,
and quite frankly, nobody has cared very deeply.  We absolutely know how
to fix it, and it's not _complicated_, but it's not exactly pretty
either.

This oneliner fixes it without the ugliness, and allows for further
future cleanups.

  "We've secretly replaced their regular MODVERSIONS with nothing at
   all, let's see if they notice"

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'acpi-4.9-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"Two ACPI fixes for 4.9-rc7.

  One of them reverts a recent ACPI commit that attempted to improve
  reboot/power-off on some systems, but introduced problems elsewhere,
  and the other one fixes kernel builds with the new WDAT watchdog
  driver enabled in some configurations.

  Specifics:

   - Revert the recent commit that caused the ACPI _PTS method to be
     executed in the power-off/reboot code path (as per the
     specification) in an attempt to improve things on some systems
     (apparently expecting _PTS to be executed in that code path), but
     broke power-off/reboot on at least one other machine (Rafael
     Wysocki).

   - Fix kernel builds with the new WDAT watchdog driver enabled in some
     configurations by explicitly selecting WATCHDOG_CORE when enabling
     the WDAT watchdog driver (Mika Westerberg)"

* tag 'acpi-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  watchdog: wdat_wdt: Select WATCHDOG_CORE
  Revert "ACPI: Execute _PTS before system reboot"

MAINTAINERS: Add bug tracking system location entry type

Following the kernel Bugzilla discussion during the Kernel Summit
(https://lwn.net/Articles/705245/), add bug tracking system location
entry type (B) to MAINTAINERS and populate it for several subsystems
known to be using the kernel BZ actively (and add the upstream BZ for
ACPICA too).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "i2c: designware: do not disable adapter after transfer"

This reverts commit 0317e6c0f1dc1ba86b8d9dccc010c5e77b8355fa.

Srinivas reported recently touchscreen and touchpad stopped working in
Haswell based machine in Linux 4.9-rc series with timeout errors from
i2c_designware:

[   16.508013] i2c_designware INT33C3:00: controller timed out
[   16.508302] i2c_hid i2c-MSFT0001:02: failed to change power setting.
[   17.532016] i2c_designware INT33C3:00: controller timed out
[   18.556022] i2c_designware INT33C3:00: controller timed out
[   18.556315] i2c_hid i2c-ATML1000:00: failed to retrieve report from device.

I managed to reproduce similar errors on another Haswell based machine
where touchscreen initialization fails maybe in every 1/5 - 1/2 boots.
Since root cause for these errors is not clear yet and debugging is
ongoing it's better to revert this commit as we are near to release.

Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Merge branches 'acpi-sleep-fixes' and 'acpi-wdat-fixes'

* acpi-sleep-fixes:
Revert "ACPI: Execute _PTS before system reboot"

* acpi-wdat-fixes:
watchdog: wdat_wdt: Select WATCHDOG_CORE

Merge tag 'linux-can-fixes-for-4.9-20161123' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-11-23

this is a pull request for net/master.

The patch by Oliver Hartkopp for the broadcast manager (bcm) fixes the
CAN-FD support, which may cause an out-of-bounds access otherwise.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

dwc_eth_qos: drop duplicate headers

Drop duplicate headers types.h and delay.h from dwc_eth_qos.c.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mfd-fixes-4.9.1' of git://git./linux/kernel/git/lee/mfd

Pull MFD fixes from Lee Jones:
"Received a copule of last minute fixes for v4.9.

  The patches from Viresh are fixing issues displayed in KernelCI"

* tag 'mfd-fixes-4.9.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: wm8994-core: Don't use managed regulator bulk get API
  mfd: wm8994-core: Disable regulators before removing them
  mfd: syscon: Support native-endian regmaps

Merge tag 'media/v4.9-4' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fix from Mauro Carvalho Chehab:
"Fix for the firmware load logic of the tuner-xc2028 driver"

* tag 'media/v4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
xc2028: Fix use-after-free bug properly

Merge tag 'drm-fixes-for-v4.9-rc7' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"Seems to be quietening down nicely, a few mediatek, one exynos and one
  hdlcd fix, along with two amd fixes"

* tag 'drm-fixes-for-v4.9-rc7' of git://people.freedesktop.org/~airlied/linux:
  gpu/drm/exynos/exynos_hdmi - Unmap region obtained by of_iomap
  drm/mediatek: fix null pointer dereference
  drm/mediatek: fixed the calc method of data rate per lane
  drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE
  drm/radeon: fix power state when port pm is unavailable (v2)
  drm/amdgpu: fix power state when port pm is unavailable
  drm/arm: hdlcd: fix plane base address update
  drm/amd/powerplay: avoid out of bounds access on array ps.

parisc: Also flush data TLB in flush_icache_page_asm

This is the second issue I noticed in reviewing the parisc TLB code.

The fic instruction may use either the instruction or data TLB in
flushing the instruction cache. Thus, on machines with a split TLB, we
should also flush the data TLB after setting up the temporary alias
registers.

Although this has no functional impact, I changed the pdtlb and pitlb
instructions to consistently use the index register %r0. These
instructions do not support integer displacements.

Tested on rp3440 and c8000.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Helge Deller <deller@gmx.de>

parisc: Fix race in pci-dma.c

We are still troubled by occasional random segmentation faults and
memory memory corruption on SMP machines.  The causes quite a few
package builds to fail on the Debian buildd machines for parisc.  When
gcc-6 failed to build three times in a row, I looked again at the TLB
related code.  I found a couple of issues.  This is the first.

In general, we need to ensure page table updates and corresponding TLB
purges are atomic.  The attached patch fixes an instance in pci-dma.c
where the page table update was not guarded by the TLB lock.

Tested on rp3440 and c8000.  So far, no further random segmentation
faults have been observed.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Helge Deller <deller@gmx.de>

parisc: Switch to generic sched_clock implementation

Drop the open-coded sched_clock() function and replace it by the provided
GENERIC_SCHED_CLOCK implementation. We have seen quite some hung tasks in the
past, which seem to be fixed by this patch.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Helge Deller <deller@gmx.de>

parisc: Fix races in parisc_setup_cache_timing()

Helge reported to me the following startup crash:

[    0.000000] Linux version 4.8.0-1-parisc64-smp (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (GCC) ) #1 SMP Debian 4.8.7-1 (2016-11-13)
[    0.000000] The 64-bit Kernel has started...
[    0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size.
[    0.000000] Determining PDC firmware type: System Map.
[    0.000000] model 9000/785/J5000
[    0.000000] Total Memory: 2048 MB
[    0.000000] Memory: 2018528K/2097152K available (9272K kernel code, 3053K rwdata, 1319K rodata, 1024K init, 840K bss, 78624K reserved, 0K cma-reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     vmalloc : 0x0000000000008000 - 0x000000003f000000   (1007 MB)
[    0.000000]     memory  : 0x0000000040000000 - 0x00000000c0000000   (2048 MB)
[    0.000000]       .init : 0x0000000040100000 - 0x0000000040200000   (1024 kB)
[    0.000000]       .data : 0x0000000040b0e000 - 0x0000000040f533e0   (4372 kB)
[    0.000000]       .text : 0x0000000040200000 - 0x0000000040b0e000   (9272 kB)
[    0.768910] Brought up 1 CPUs
[    0.992465] NET: Registered protocol family 16
[    2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000
[    2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online
[    2.726692] Setting cache flush threshold to 1024 kB
[    2.729932] Not-handled unaligned insn 0x43ffff80
[    2.798114] Setting TLB flush threshold to 140 kB
[    2.928039] Unaligned handler failed, ret = -1
[    3.000419]       _______________________________
[    3.000419]      < Your System ate a SPARC! Gah! >
[    3.000419]       -------------------------------
[    3.000419]              \   ^__^
[    3.000419]                  (__)\       )\/\
[    3.000419]                   U  ||----w |
[    3.000419]                      ||     ||
[    9.340055] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1
[    9.448082] task: 00000000bfd48060 task.stack: 00000000bfd50000
[    9.528040]
[   10.760029] IASQ: 0000000000000000 0000000000000000 IAOQ: 000000004025d154 000000004025d158
[   10.868052]  IIR: 43ffff80    ISR: 0000000000340000  IOR: 000001ff54150960
[   10.960029]  CPU:        1   CR30: 00000000bfd50000 CR31: 0000000011111111
[   11.052057]  ORIG_R28: 000000004021e3b4
[   11.100045]  IAOQ[0]: irq_exit+0x94/0x120
[   11.152062]  IAOQ[1]: irq_exit+0x98/0x120
[   11.208031]  RP(r2): irq_exit+0xb8/0x120
[   11.256074] Backtrace:
[   11.288067]  [<00000000402cd944>] cpu_startup_entry+0x1e4/0x598
[   11.368058]  [<0000000040109528>] smp_callin+0x2c0/0x2f0
[   11.436308]  [<00000000402b53fc>] update_curr+0x18c/0x2d0
[   11.508055]  [<00000000402b73b8>] dequeue_entity+0x2c0/0x1030
[   11.584040]  [<00000000402b3cc0>] set_next_entity+0x80/0xd30
[   11.660069]  [<00000000402c1594>] pick_next_task_fair+0x614/0x720
[   11.740085]  [<000000004020dd34>] __schedule+0x394/0xa60
[   11.808054]  [<000000004020e488>] schedule+0x88/0x118
[   11.876039]  [<0000000040283d3c>] rescuer_thread+0x4d4/0x5b0
[   11.948090]  [<000000004028fc4c>] kthread+0x1ec/0x248
[   12.016053]  [<0000000040205020>] end_fault_vector+0x20/0xc0
[   12.092239]  [<00000000402050c0>] _switch_to_ret+0x0/0xf40
[   12.164044]
[   12.184036] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1
[   12.244040] Backtrace:
[   12.244040]  [<000000004021c480>] show_stack+0x68/0x80
[   12.244040]  [<00000000406f332c>] dump_stack+0xec/0x168
[   12.244040]  [<000000004021c74c>] die_if_kernel+0x25c/0x430
[   12.244040]  [<000000004022d320>] handle_unaligned+0xb48/0xb50
[   12.244040]
[   12.632066] ---[ end trace 9ca05a7215c7bbb2 ]---
[   12.692036] Kernel panic - not syncing: Attempted to kill the idle task!

We have the insn 0x43ffff80 in IIR but from IAOQ we should have:
   4025d150:   0f f3 20 df     ldd,s r19(r31),r31
   4025d154:   0f 9f 00 9c     ldw r31(ret0),ret0
   4025d158:   bf 80 20 58     cmpb,*<> r0,ret0,4025d18c <irq_exit+0xcc>

Cpu0 has just completed running parisc_setup_cache_timing:

[    2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000
[    2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online
[    2.726692] Setting cache flush threshold to 1024 kB
[    2.729932] Not-handled unaligned insn 0x43ffff80
[    2.798114] Setting TLB flush threshold to 140 kB
[    2.928039] Unaligned handler failed, ret = -1

From the backtrace, cpu1 is in smp_callin:

void __init smp_callin(void)
{
       int slave_id = cpu_now_booting;

       smp_cpu_init(slave_id);
       preempt_disable();

       flush_cache_all_local(); /* start with known state */
       flush_tlb_all_local(NULL);

       local_irq_enable();  /* Interrupts have been off until now */

       cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);

So, it has just flushed its caches and the TLB. It would seem either the
flushes in parisc_setup_cache_timing or smp_callin have corrupted kernel
memory.

The attached patch reworks parisc_setup_cache_timing to remove the races
in setting the cache and TLB flush thresholds. It also corrects the
number of bytes flushed in the TLB calculation.

The patch flushes the cache and TLB on cpu0 before starting the
secondary processors so that they are started from a known state.

Tested with a few reboots on c8000.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Helge Deller <deller@gmx.de>

mfd: wm8994-core: Don't use managed regulator bulk get API

The kernel WARNs and then crashes today if wm8994_device_init() fails
after calling devm_regulator_bulk_get().

That happens because there are multiple devices involved here and the
order in which managed resources are freed isn't correct.

The regulators are added as children of wm8994->dev. Whereas,
devm_regulator_bulk_get() receives wm8994->dev as the device, though it
gets the same regulators which were added as children of wm8994->dev
earlier.

During failures, the children are removed first and the core eventually
calls regulator_unregister() for them. As regulator_put() was never done
for them (opposite of devm_regulator_bulk_get()), the kernel WARNs at

WARN_ON(rdev->open_count);

And eventually it crashes from debugfs_remove_recursive().

--------x------------------x----------------

wm8994 3-001a: Device is not a WM8994, ID is 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at /mnt/ssd/all/work/repos/devel/linux/drivers/regulator/core.c:4072 regulator_unregister+0xc8/0xd0
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc6-00154-g54fe84cbd50b #41
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c010e24c>] (unwind_backtrace) from [<c010af38>] (show_stack+0x10/0x14)
[<c010af38>] (show_stack) from [<c032a1c4>] (dump_stack+0x88/0x9c)
[<c032a1c4>] (dump_stack) from [<c011a98c>] (__warn+0xe8/0x100)
[<c011a98c>] (__warn) from [<c011aa54>] (warn_slowpath_null+0x20/0x28)
[<c011aa54>] (warn_slowpath_null) from [<c0384a0c>] (regulator_unregister+0xc8/0xd0)
[<c0384a0c>] (regulator_unregister) from [<c0406434>] (release_nodes+0x16c/0x1dc)
[<c0406434>] (release_nodes) from [<c04039c4>] (__device_release_driver+0x8c/0x110)
[<c04039c4>] (__device_release_driver) from [<c0403a64>] (device_release_driver+0x1c/0x28)
[<c0403a64>] (device_release_driver) from [<c0402b24>] (bus_remove_device+0xd8/0x104)
[<c0402b24>] (bus_remove_device) from [<c03ffcd8>] (device_del+0x10c/0x218)
[<c03ffcd8>] (device_del) from [<c0404e4c>] (platform_device_del+0x1c/0x88)
[<c0404e4c>] (platform_device_del) from [<c0404ec4>] (platform_device_unregister+0xc/0x20)
[<c0404ec4>] (platform_device_unregister) from [<c0428bc0>] (mfd_remove_devices_fn+0x5c/0x64)
[<c0428bc0>] (mfd_remove_devices_fn) from [<c03ff9d8>] (device_for_each_child_reverse+0x4c/0x78)
[<c03ff9d8>] (device_for_each_child_reverse) from [<c04288c4>] (mfd_remove_devices+0x20/0x30)
[<c04288c4>] (mfd_remove_devices) from [<c042758c>] (wm8994_device_init+0x2ac/0x7f0)
[<c042758c>] (wm8994_device_init) from [<c04f14a8>] (i2c_device_probe+0x178/0x1fc)
[<c04f14a8>] (i2c_device_probe) from [<c04036fc>] (driver_probe_device+0x214/0x2c0)
[<c04036fc>] (driver_probe_device) from [<c0403854>] (__driver_attach+0xac/0xb0)
[<c0403854>] (__driver_attach) from [<c0401a74>] (bus_for_each_dev+0x68/0x9c)
[<c0401a74>] (bus_for_each_dev) from [<c0402cf0>] (bus_add_driver+0x1a0/0x218)
[<c0402cf0>] (bus_add_driver) from [<c040406c>] (driver_register+0x78/0xf8)
[<c040406c>] (driver_register) from [<c04f20a0>] (i2c_register_driver+0x34/0x84)
[<c04f20a0>] (i2c_register_driver) from [<c01017d0>] (do_one_initcall+0x40/0x170)
[<c01017d0>] (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
[<c0a00dbc>] (kernel_init_freeable) from [<c06e07b0>] (kernel_init+0x8/0x114)
[<c06e07b0>] (kernel_init) from [<c0107978>] (ret_from_fork+0x14/0x3c)
---[ end trace 0919d3d0bc998260 ]---

[snip..]

Unable to handle kernel NULL pointer dereference at virtual address 00000078
pgd = c0004000
[00000078] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.8.0-rc6-00154-g54fe84cbd50b #41
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
task: ee874000 task.stack: ee878000
PC is at down_write+0x14/0x54
LR is at debugfs_remove_recursive+0x30/0x150

[snip..]

[<c06e489c>] (down_write) from [<c02e9954>] (debugfs_remove_recursive+0x30/0x150)
[<c02e9954>] (debugfs_remove_recursive) from [<c0382b78>] (_regulator_put+0x24/0xac)
[<c0382b78>] (_regulator_put) from [<c0382c1c>] (regulator_put+0x1c/0x2c)
[<c0382c1c>] (regulator_put) from [<c0406434>] (release_nodes+0x16c/0x1dc)
[<c0406434>] (release_nodes) from [<c04035d4>] (driver_probe_device+0xec/0x2c0)
[<c04035d4>] (driver_probe_device) from [<c0403854>] (__driver_attach+0xac/0xb0)
[<c0403854>] (__driver_attach) from [<c0401a74>] (bus_for_each_dev+0x68/0x9c)
[<c0401a74>] (bus_for_each_dev) from [<c0402cf0>] (bus_add_driver+0x1a0/0x218)
[<c0402cf0>] (bus_add_driver) from [<c040406c>] (driver_register+0x78/0xf8)
[<c040406c>] (driver_register) from [<c04f20a0>] (i2c_register_driver+0x34/0x84)
[<c04f20a0>] (i2c_register_driver) from [<c01017d0>] (do_one_initcall+0x40/0x170)
[<c01017d0>] (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
[<c0a00dbc>] (kernel_init_freeable) from [<c06e07b0>] (kernel_init+0x8/0x114)
[<c06e07b0>] (kernel_init) from [<c0107978>] (ret_from_fork+0x14/0x3c)
Code: e1a04000 f590f000 e3a03001 e34f3fff (e1902f9f)
---[ end trace 0919d3d0bc998262 ]---

--------x------------------x----------------

Fix the kernel warnings and crashes by using regulator_bulk_get()
instead of devm_regulator_bulk_get() and explicitly freeing the supplies
in exit paths.

Tested on Exynos 5250, dual core ARM A15 machine.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: wm8994-core: Disable regulators before removing them

The order in which resources were freed in wm8994_device_exit() isn't
correct. The regulators are removed before they are disabled.

Fix it by reordering code a bit, which makes it exact opposite of
wm8994_device_init() as well.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

MIPS: mm: Fix output of __do_page_fault

Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") the output from __do_page_fault on MIPS has been
pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont
to provide the appropriate markers & restore the expected output.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14544/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

mfd: syscon: Support native-endian regmaps

The regmap devicetree binding documentation states that a native-endian
property should be supported as well as big-endian & little-endian,
however syscon in its duplication of the parsing of these properties
omits support for native-endian. Fix this by setting
REGMAP_ENDIAN_NATIVE when a native-endian property is found.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Merge branch 'mediatek-drm-fixes-2016-11-24' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes

This branch include patches of fixing a typo, accurate dsi frame rate,
and fixing null pointer dereference.

* 'mediatek-drm-fixes-2016-11-24' of https://github.com/ckhu-mediatek/linux.git-tags:
  drm/mediatek: fix null pointer dereference
  drm/mediatek: fixed the calc method of data rate per lane
  drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE

powerpc/mm: Fixup kernel read only mapping

With commit e58e87adc8bf9 ("powerpc/mm: Update _PAGE_KERNEL_RO") we
started using the ppp value 0b110 to map kernel readonly. But that
facility was only added as part of ISA 2.04. For earlier ISA version
only supported ppp bit value for readonly mapping is 0b011. (This
implies both user and kernel get mapped using the same ppp bit value for
readonly mapping.).
Update the code such that for earlier architecture version we use ppp
value 0b011 for readonly mapping. We don't differentiate between power5+
and power5 here and apply the new ppp bits only from power6 (ISA 2.05).
This keep the changes minimal.

This fixes issue with PS3 spu usage reported at
https://lkml.kernel.org/r/rep.1421449714.geoff@infradead.org

Fixes: e58e87adc8bf9 ("powerpc/mm: Update _PAGE_KERNEL_RO")
Cc: stable@vger.kernel.org # v4.7+
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]

This fixes CVE-2016-8650.

If mpi_powm() is given a zero exponent, it wants to immediately return
either 1 or 0, depending on the modulus.  However, if the result was
initalised with zero limb space, no limbs space is allocated and a
NULL-pointer exception ensues.

Fix this by allocating a minimal amount of limb space for the result when
the 0-exponent case when the result is 1 and not touching the limb space
when the result is 0.

This affects the use of RSA keys and X.509 certificates that carry them.

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
PGD 0
Oops: 0002 [#1] SMP
Modules linked in:
CPU: 3 PID: 3014 Comm: keyctl Not tainted 4.9.0-rc6-fscache+ #278
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task: ffff8804011944c0 task.stack: ffff880401294000
RIP: 0010:[<ffffffff8138ce5d>]  [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
RSP: 0018:ffff880401297ad8  EFLAGS: 00010212
RAX: 0000000000000000 RBX: ffff88040868bec0 RCX: ffff88040868bba0
RDX: ffff88040868b260 RSI: ffff88040868bec0 RDI: ffff88040868bee0
RBP: ffff880401297ba8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000047 R11: ffffffff8183b210 R12: 0000000000000000
R13: ffff8804087c7600 R14: 000000000000001f R15: ffff880401297c50
FS:  00007f7a7918c700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000401250000 CR4: 00000000001406e0
Stack:
ffff88040868bec0 0000000000000020 ffff880401297b00 ffffffff81376cd4
0000000000000100 ffff880401297b10 ffffffff81376d12 ffff880401297b30
ffffffff81376f37 0000000000000100 0000000000000000 ffff880401297ba8
Call Trace:
[<ffffffff81376cd4>] ? __sg_page_iter_next+0x43/0x66
[<ffffffff81376d12>] ? sg_miter_get_next_page+0x1b/0x5d
[<ffffffff81376f37>] ? sg_miter_next+0x17/0xbd
[<ffffffff8138ba3a>] ? mpi_read_raw_from_sgl+0xf2/0x146
[<ffffffff8132a95c>] rsa_verify+0x9d/0xee
[<ffffffff8132acca>] ? pkcs1pad_sg_set_buf+0x2e/0xbb
[<ffffffff8132af40>] pkcs1pad_verify+0xc0/0xe1
[<ffffffff8133cb5e>] public_key_verify_signature+0x1b0/0x228
[<ffffffff8133d974>] x509_check_for_self_signed+0xa1/0xc4
[<ffffffff8133cdde>] x509_cert_parse+0x167/0x1a1
[<ffffffff8133d609>] x509_key_preparse+0x21/0x1a1
[<ffffffff8133c3d7>] asymmetric_key_preparse+0x34/0x61
[<ffffffff812fc9f3>] key_create_or_update+0x145/0x399
[<ffffffff812fe227>] SyS_add_key+0x154/0x19e
[<ffffffff81001c2b>] do_syscall_64+0x80/0x191
[<ffffffff816825e4>] entry_SYSCALL64_slow_path+0x25/0x25
Code: 56 41 55 41 54 53 48 81 ec a8 00 00 00 44 8b 71 04 8b 42 04 4c 8b 67 18 45 85 f6 89 45 80 0f 84 b4 06 00 00 85 c0 75 2f 41 ff ce <49> c7 04 24 01 00 00 00 b0 01 75 0b 48 8b 41 18 48 83 38 01 0f
RIP  [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
RSP <ffff880401297ad8>
CR2: 0000000000000000
---[ end trace d82015255d4a5d8d ]---

Basically, this is a backport of a libgcrypt patch:

http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libgcrypt.git;a=patch;h=6e1adb05d290aeeb1c230c763970695f4a538526

Fixes: cdec9cb5167a ("crypto: GnuPG based MPI lib - source files (part 1)")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
cc: linux-ima-devel@lists.sourceforge.net
cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>

X.509: Fix double free in x509_cert_parse() [ver #3]

We shouldn't free cert->pub->key in x509_cert_parse() because
x509_free_certificate() also does this:
BUG: Double free or freeing an invalid pointer
...
Call Trace:
[<ffffffff81896c20>] dump_stack+0x63/0x83
[<ffffffff81356571>] kasan_object_err+0x21/0x70
[<ffffffff81356ed9>] kasan_report_double_free+0x49/0x60
[<ffffffff813561ad>] kasan_slab_free+0x9d/0xc0
[<ffffffff81350b7a>] kfree+0x8a/0x1a0
[<ffffffff81844fbf>] public_key_free+0x1f/0x30
[<ffffffff818455d4>] x509_free_certificate+0x24/0x90
[<ffffffff818460bc>] x509_cert_parse+0x2bc/0x300
[<ffffffff81846cae>] x509_key_preparse+0x3e/0x330
[<ffffffff818444cf>] asymmetric_key_preparse+0x6f/0x100
[<ffffffff8178bec0>] key_create_or_update+0x260/0x5f0
[<ffffffff8178e6d9>] SyS_add_key+0x199/0x2a0
[<ffffffff821d823b>] entry_SYSCALL_64_fastpath+0x1e/0xad
Object at ffff880110bd1900, in cache kmalloc-512 size: 512
....
Freed:
PID = 2579
[<ffffffff8104283b>] save_stack_trace+0x1b/0x20
[<ffffffff813558f6>] save_stack+0x46/0xd0
[<ffffffff81356183>] kasan_slab_free+0x73/0xc0
[<ffffffff81350b7a>] kfree+0x8a/0x1a0
[<ffffffff818460a3>] x509_cert_parse+0x2a3/0x300
[<ffffffff81846cae>] x509_key_preparse+0x3e/0x330
[<ffffffff818444cf>] asymmetric_key_preparse+0x6f/0x100
[<ffffffff8178bec0>] key_create_or_update+0x260/0x5f0
[<ffffffff8178e6d9>] SyS_add_key+0x199/0x2a0
[<ffffffff821d823b>] entry_SYSCALL_64_fastpath+0x1e/0xad

Fixes: db6c43bd2132 ("crypto: KEYS: convert public key and digsig asym to the akcipher api")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

gpu/drm/exynos/exynos_hdmi - Unmap region obtained by of_iomap

Free memory mapping, if hdmi_probe is not successful.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth

Johan Hedberg says:

====================
pull request: bluetooth 2016-11-23

Sorry about the late pull request for 4.9, but we have one more
important Bluetooth patch that should make it to the release. It fixes
connection creation for Bluetooth LE controllers that do not have a
public address (only a random one).

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net sched filters: fix filter handle ID in tfilter_notify_chain()

Should pass valid filter handle, not the netlink flags.

Fixes: 30a391a13ab92 ("net sched filters: pass netlink message flags in event notification")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link change

In case the link change and EEE is enabled or disabled, always try to
re-negotiate this with the link partner.

Fixes: 450b05c15f9c ("net: dsa: bcm_sf2: add support for controlling EEE")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt: do not busy-poll when link is down

When busy polling while a link is down (during a link-flap test), TX
timeouts were observed as well as the following messages in the ring
buffer:

bnxt_en 0008:01:00.2 enP8p1s0f2d2: Resp cmpl intr err msg: 0x51
bnxt_en 0008:01:00.2 enP8p1s0f2d2: hwrm_ring_free tx failed. rc:-1
bnxt_en 0008:01:00.2 enP8p1s0f2d2: Resp cmpl intr err msg: 0x51
bnxt_en 0008:01:00.2 enP8p1s0f2d2: hwrm_ring_free rx failed. rc:-1

These were resolved by checking for link status and returning if link
was not up.

Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Rob Miller <rob.miller@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

udplite: call proper backlog handlers

In commits 93821778def10 ("udp: Fix rcv socket locking") and
f7ad74fef3af ("net/ipv6/udp: UDP encapsulation: break backlog_rcv into
__udpv6_queue_rcv_skb") UDP backlog handlers were renamed, but UDPlite
was forgotten.

This leads to crashes if UDPlite header is pulled twice, which happens
starting from commit e6afc8ace6dd ("udp: remove headers from UDP packets
before queueing")

Bug found by syzkaller team, thanks a lot guys !

Note that backlog use in UDP/UDPlite is scheduled to be removed starting
from linux-4.10, so this patch is only needed up to linux-4.9

Fixes: 93821778def1 ("udp: Fix rcv socket locking")
Fixes: f7ad74fef3af ("net/ipv6/udp: UDP encapsulation: break backlog_rcv into __udpv6_queue_rcv_skb")
Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mmc-v4.9-rc5' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"MMC host:

   - sdhci-of-esdhc: Fix card detection
   - dw_mmc: Fix DMA error path"

* tag 'mmc-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc: fix the error handling for dma operation
  mmc: sdhci-of-esdhc: fixup PRESENT_STATE read

Merge tag 'usb-4.9-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are a few small USB fixes and new device ids for 4.9-rc7.

  The majority of these fixes are in the musb driver, fixing a number of
  regressions that have been reported but took a while to resolve. The
  other fixes are all small ones, to resolve other reported minor
  issues.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: f_fs: fix wrong parenthesis in ffs_func_req_match()
  phy: twl4030-usb: Fix for musb session bit based PM
  usb: musb: Drop pointless PM runtime code for dsps glue
  usb: musb: Add missing pm_runtime_disable and drop 2430 PM timeout
  usb: musb: Fix PM for hub disconnect
  usb: musb: Fix sleeping function called from invalid context for hdrc glue
  usb: musb: Fix broken use of static variable for multiple instances
  USB: serial: cp210x: add ID for the Zone DPMX
  usb: chipidea: move the lock initialization to core file
  Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
  USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID fixes from Jiri Kosina:

- DMA-on-stack fixes for a couple drivers, from Benjamin Tissoires

- small memory sanitization fix for sensor-hub driver, from Song
   Hongyan

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-sensor-hub: clear memory to avoid random data
  HID: rmi: make transfer buffers DMA capable
  HID: magicmouse: make transfer buffers DMA capable
  HID: lg: make transfer buffers DMA capable
  HID: cp2112: make transfer buffers DMA capable

KVM: x86: check for pic and ioapic presence before use

Split irqchip allows pic and ioapic routes to be used without them being
created, which results in NULL access.  Check for NULL and avoid it.
(The setup is too racy for a nicer solutions.)

Found by syzkaller:

  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in:
  CPU: 3 PID: 11923 Comm: kworker/3:2 Not tainted 4.9.0-rc5+ #27
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Workqueue: events irqfd_inject
  task: ffff88006a06c7c0 task.stack: ffff880068638000
  RIP: 0010:[...]  [...] __lock_acquire+0xb35/0x3380 kernel/locking/lockdep.c:3221
  RSP: 0000:ffff88006863ea20  EFLAGS: 00010006
  RAX: dffffc0000000000 RBX: dffffc0000000000 RCX: 0000000000000000
  RDX: 0000000000000039 RSI: 0000000000000000 RDI: 1ffff1000d0c7d9e
  RBP: ffff88006863ef58 R08: 0000000000000001 R09: 0000000000000000
  R10: 00000000000001c8 R11: 0000000000000000 R12: ffff88006a06c7c0
  R13: 0000000000000001 R14: ffffffff8baab1a0 R15: 0000000000000001
  FS:  0000000000000000(0000) GS:ffff88006d100000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000004abdd0 CR3: 000000003e2f2000 CR4: 00000000000026e0
  Stack:
   ffffffff894d0098 1ffff1000d0c7d56 ffff88006863ecd0 dffffc0000000000
   ffff88006a06c7c0 0000000000000000 ffff88006863ecf8 0000000000000082
   0000000000000000 ffffffff815dd7c1 ffffffff00000000 ffffffff00000000
  Call Trace:
   [...] lock_acquire+0x2a2/0x790 kernel/locking/lockdep.c:3746
   [...] __raw_spin_lock include/linux/spinlock_api_smp.h:144
   [...] _raw_spin_lock+0x38/0x50 kernel/locking/spinlock.c:151
   [...] spin_lock include/linux/spinlock.h:302
   [...] kvm_ioapic_set_irq+0x4c/0x100 arch/x86/kvm/ioapic.c:379
   [...] kvm_set_ioapic_irq+0x8f/0xc0 arch/x86/kvm/irq_comm.c:52
   [...] kvm_set_irq+0x239/0x640 arch/x86/kvm/../../../virt/kvm/irqchip.c:101
   [...] irqfd_inject+0xb4/0x150 arch/x86/kvm/../../../virt/kvm/eventfd.c:60
   [...] process_one_work+0xb40/0x1ba0 kernel/workqueue.c:2096
   [...] worker_thread+0x214/0x18a0 kernel/workqueue.c:2230
   [...] kthread+0x328/0x3e0 kernel/kthread.c:209
   [...] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: 49df6397edfc ("KVM: x86: Split the APIC from the rest of IRQCHIP.")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: x86: fix out-of-bounds accesses of rtc_eoi map

KVM was using arrays of size KVM_MAX_VCPUS with vcpu_id, but ID can be
bigger that the maximal number of VCPUs, resulting in out-of-bounds
access.

Found by syzkaller:

  BUG: KASAN: slab-out-of-bounds in __apic_accept_irq+0xb33/0xb50 at addr [...]
  Write of size 1 by task a.out/27101
  CPU: 1 PID: 27101 Comm: a.out Not tainted 4.9.0-rc5+ #49
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
   [...]
  Call Trace:
   [...] __apic_accept_irq+0xb33/0xb50 arch/x86/kvm/lapic.c:905
   [...] kvm_apic_set_irq+0x10e/0x180 arch/x86/kvm/lapic.c:495
   [...] kvm_irq_delivery_to_apic+0x732/0xc10 arch/x86/kvm/irq_comm.c:86
   [...] ioapic_service+0x41d/0x760 arch/x86/kvm/ioapic.c:360
   [...] ioapic_set_irq+0x275/0x6c0 arch/x86/kvm/ioapic.c:222
   [...] kvm_ioapic_inject_all arch/x86/kvm/ioapic.c:235
   [...] kvm_set_ioapic+0x223/0x310 arch/x86/kvm/ioapic.c:670
   [...] kvm_vm_ioctl_set_irqchip arch/x86/kvm/x86.c:3668
   [...] kvm_arch_vm_ioctl+0x1a08/0x23c0 arch/x86/kvm/x86.c:3999
   [...] kvm_vm_ioctl+0x1fa/0x1a70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3099

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: af1bae5497b9 ("KVM: x86: bump KVM_MAX_VCPU_ID to 1023")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: x86: drop error recovery in em_jmp_far and em_ret_far

em_jmp_far and em_ret_far assumed that setting IP can only fail in 64
bit mode, but syzkaller proved otherwise (and SDM agrees).
Code segment was restored upon failure, but it was left uninitialized
outside of long mode, which could lead to a leak of host kernel stack.
We could have fixed that by always saving and restoring the CS, but we
take a simpler approach and just break any guest that manages to fail
as the error recovery is error-prone and modern CPUs don't need emulator
for this.

Found by syzkaller:

  WARNING: CPU: 2 PID: 3668 at arch/x86/kvm/emulate.c:2217 em_ret_far+0x428/0x480
  Kernel panic - not syncing: panic_on_warn set ...

  CPU: 2 PID: 3668 Comm: syz-executor Not tainted 4.9.0-rc4+ #49
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
   [...]
  Call Trace:
   [...] __dump_stack lib/dump_stack.c:15
   [...] dump_stack+0xb3/0x118 lib/dump_stack.c:51
   [...] panic+0x1b7/0x3a3 kernel/panic.c:179
   [...] __warn+0x1c4/0x1e0 kernel/panic.c:542
   [...] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585
   [...] em_ret_far+0x428/0x480 arch/x86/kvm/emulate.c:2217
   [...] em_ret_far_imm+0x17/0x70 arch/x86/kvm/emulate.c:2227
   [...] x86_emulate_insn+0x87a/0x3730 arch/x86/kvm/emulate.c:5294
   [...] x86_emulate_instruction+0x520/0x1ba0 arch/x86/kvm/x86.c:5545
   [...] emulate_instruction arch/x86/include/asm/kvm_host.h:1116
   [...] complete_emulated_io arch/x86/kvm/x86.c:6870
   [...] complete_emulated_mmio+0x4e9/0x710 arch/x86/kvm/x86.c:6934
   [...] kvm_arch_vcpu_ioctl_run+0x3b7a/0x5a90 arch/x86/kvm/x86.c:6978
   [...] kvm_vcpu_ioctl+0x61e/0xdd0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2557
   [...] vfs_ioctl fs/ioctl.c:43
   [...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679
   [...] SYSC_ioctl fs/ioctl.c:694
   [...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685
   [...] entry_SYSCALL_64_fastpath+0x1f/0xc2

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: d1442d85cc30 ("KVM: x86: Handle errors when RIP is set during far jumps")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: x86: fix out-of-bounds access in lapic

Cluster xAPIC delivery incorrectly assumed that dest_id <= 0xff.
With enabled KVM_X2APIC_API_USE_32BIT_IDS in KVM_CAP_X2APIC_API, a
userspace can send an interrupt with dest_id that results in
out-of-bounds access.

Found by syzkaller:

  BUG: KASAN: slab-out-of-bounds in kvm_irq_delivery_to_apic_fast+0x11fa/0x1210 at addr ffff88003d9ca750
  Read of size 8 by task syz-executor/22923
  CPU: 0 PID: 22923 Comm: syz-executor Not tainted 4.9.0-rc4+ #49
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
   [...]
  Call Trace:
   [...] __dump_stack lib/dump_stack.c:15
   [...] dump_stack+0xb3/0x118 lib/dump_stack.c:51
   [...] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156
   [...] print_address_description mm/kasan/report.c:194
   [...] kasan_report_error mm/kasan/report.c:283
   [...] kasan_report+0x231/0x500 mm/kasan/report.c:303
   [...] __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:329
   [...] kvm_irq_delivery_to_apic_fast+0x11fa/0x1210 arch/x86/kvm/lapic.c:824
   [...] kvm_irq_delivery_to_apic+0x132/0x9a0 arch/x86/kvm/irq_comm.c:72
   [...] kvm_set_msi+0x111/0x160 arch/x86/kvm/irq_comm.c:157
   [...] kvm_send_userspace_msi+0x201/0x280 arch/x86/kvm/../../../virt/kvm/irqchip.c:74
   [...] kvm_vm_ioctl+0xba5/0x1670 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3015
   [...] vfs_ioctl fs/ioctl.c:43
   [...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679
   [...] SYSC_ioctl fs/ioctl.c:694
   [...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685
   [...] entry_SYSCALL_64_fastpath+0x1f/0xc2

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: e45115b62f9a ("KVM: x86: use physical LAPIC array for logical x2APIC")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

init: use pr_cont() when displaying rotator during ramdisk loading.

Otherwise each individual rotator char would be printed in a new line:

(...)
[    0.642350] -
[    0.644374] |
[    0.646367] -
(...)

Signed-off-by: Nicolas Schichan <nicolas.schichan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipv6: bump genid when the IFA_F_TENTATIVE flag is clear

When an ipv6 address has the tentative flag set, it can't be
used as source for egress traffic, while the associated route,
if any, can be looked up and even stored into some dst_cache.

In the latter scenario, the source ipv6 address selected and
stored in the cache is most probably wrong (e.g. with
link-local scope) and the entity using the dst_cache will
experience lack of ipv6 connectivity until said cache is
cleared or invalidated.

Overall this may cause lack of connectivity over most IPv6 tunnels
(comprising geneve and vxlan), if the first egress packet reaches
the tunnel before the DaD is completed for the used ipv6
address.

This patch bumps a new genid after that the IFA_F_TENTATIVE flag
is cleared, so that dst_cache will be invalidated on
next lookup and ipv6 connectivity restored.

Fixes: 0c1d70af924b ("net: use dst_cache for vxlan device")
Fixes: 468dfffcd762 ("geneve: add dst caching support")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MIPS: Mask out limit field when calculating wired entry count

Since MIPSr6 the Wired register is split into 2 fields, with the upper
16 bits of the register indicating a limit on the value that the wired
entry count in the bottom 16 bits of the register can take. This means
that simply reading the wired register doesn't get us a valid TLB entry
index any longer, and we instead need to retrieve only the lower 16 bits
of the register. Introduce a new num_wired_entries() function which does
this on MIPSr6 or higher and simply returns the value of the wired
register on older architecture revisions, and make use of it when
reading the number of wired entries.

Since commit e710d6668309 ("MIPS: tlb-r4k: If there are wired entries,
don't use TLBINVF") we have been using a non-zero number of wired
entries to determine whether we should avoid use of the tlbinvf
instruction (which would invalidate wired entries) and instead loop over
TLB entries in local_flush_tlb_all(). This loop begins with the number
of wired entries, or before this patch some large bogus TLB index on
MIPSr6 systems. Thus since the aforementioned commit some MIPSr6 systems
with FTLBs have been prone to leaving stale address translations in the
FTLB & crashing in various weird & wonderful ways when we later observe
the wrong memory.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14557/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

i2c: designware: fix rx fifo depth tracking

When loading the TX fifo to receive bytes on the I2C bus, we incorrectly
count the number of bytes:

rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);

while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
if (rx_limit - dev->rx_outstanding <= 0)
break;
rx_limit--;
dev->rx_outstanding++;
}

DW_IC_RXFLR indicates how many bytes are available to be read in the
FIFO, dev->rx_fifo_depth is the FIFO size, and dev->rx_outstanding is
the number of bytes that we've requested to be read so far, but which
have not been read.

Firstly, increasing dev->rx_outstanding and decreasing rx_limit and then
comparing them results in each byte consuming "two" bytes in this
tracking, so this is obviously wrong.

Secondly, the number of bytes that _could_ be received into the FIFO at
any time is the number of bytes we have so far requested but not yet
read from the FIFO - in other words dev->rx_outstanding.

So, in order to request enough bytes to fill the RX FIFO, we need to
request dev->rx_fifo_depth - dev->rx_outstanding bytes.

Modifying the code thusly results in us reaching the maximum number of
bytes outstanding each time we queue more "receive" operations, provided
the transfer allows that to happen.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: designware: report short transfers

Rather than reporting success for a short transfer due to interrupt
latency, report an error both to the caller, as well as to the kernel
log.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drm/mediatek: fix null pointer dereference

The probe function requests the interrupt before initializing
the ddp component. Which leads to a null pointer dereference at boot.
Fix this by requesting the interrput after all components got
initialized properly.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC
MT8173.")
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Change-Id: I57193a7ab554dfb37c35a455900689333adf511c

drm/mediatek: fixed the calc method of data rate per lane

Tune dsi frame rate by pixel clock, dsi add some extra signal (i.e.
Tlpx, Ths-prepare, Ths-zero, Ths-trail,Ths-exit) when enter and exit LP
mode, those signals will cause h-time larger than normal and reduce FPS.
So need to multiply a coefficient to offset the extra signal's effect.
coefficient = ((htotal*bpp/lane_number)+Tlpx+Ths_prep+Ths_zero+
Ths_trail+Ths_exit)/(htotal*bpp/lane_number)

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>

drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE

If we want to set the hardware OD to relay mode,
we have to set DISP_OD_CFG register rather than
OD_RELAYMODE; otherwise, the system will access
the wrong address.

Change-Id: Ifb9bb4caa63df906437d48b5d5326b6d04ea332a
Fixes: 7216436420414144646f5d8343d061355fd23483 ("drm/mediatek: set mt8173 dithering function")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>

powerpc/boot: Fix the early OPAL console wrappers

When configured with CONFIG_PPC_EARLY_DEBUG_OPAL=y the kernel expects
the OPAL entry and base addresses to be passed in r8 and r9
respectively. Currently the wrapper does not attempt to restore these
values before entering the decompressed kernel which causes the kernel
to branch into whatever happens to be in r9 when doing a write to the
OPAL console in early boot.

This patch adds a platform_ops hook that can be used to branch into the
new kernel. The OPAL console driver patches this at runtime so that if
the console is used it will be restored just prior to entering the
kernel.

Fixes: 656ad58ef19e ("powerpc/boot: Add OPAL console to epapr wrappers")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

net/mlx4_en: Free netdev resources under state lock

Make sure mlx4_en_free_resources is called under the netdev state lock.
This is needed since RCU dereference of XDP prog should be protected.

Fixes: 326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reported-by: Sagi Grimberg <sagi@grimberg.me>
CC: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: revert "net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit"

This reverts commit 7c6ae610a1f0, because l2tp_xmit_skb() never
returns NET_XMIT_CN, it ignores the return value of l2tp_xmit_core().

Cc: Gao Feng <gfree.wind@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnetlink: fix the wrong minimal dump size getting from rtnl_calcit()

For RT netlink, calcit() function should return the minimal size for
netlink dump message. This will make sure that dump message for every
network device can be stored.

Currently, rtnl_calcit() function doesn't account the size of header of
netlink message, this patch will fix it.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix a VXLAN vs GENEVE issue

Knowing that:
#define TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_VXLAN (0x1UL << 0)
#define TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_GENEVE (0x5UL << 0)
and that 'bnxt_hwrm_tunnel_dst_port_alloc()' is only called with one of
these 2 constants, the TUNNEL_DST_PORT_ALLOC_REQ_TUNNEL_TYPE_GENEVE can not
trigger.

Replace the bit test that overlap by an equality test, just as in
'bnxt_hwrm_tunnel_dst_port_free()' above.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdevice.h: fix kernel-doc warning

Fix kernel-doc warning in <linux/netdevice.h> (missing ':'):

..//include/linux/netdevice.h:1904: warning: No description found for parameter 'prio_tc_map[TC_BITMASK + 1]'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

driver: macvlan: Check if need rollback multicast setting in macvlan_open

When dev_set_promiscuity failed in macvlan_open, it always invokes
dev_set_allmulti without checking if necessary.
Now check the IFF_ALLMULTI flag firstly before rollback the multicast
setting in the error handler.

Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: micrel: fix KSZ8041FTL supported value

Fix setting of SUPPORTED_FIBRE bit as it was not present in features
of KSZ8041.

Signed-off-by: Kirill Esipov <yesipov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld into drm-fixes

A late issue discovered by Russell King while testing his setup on Juno.

* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
drm/arm: hdlcd: fix plane base address update

Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

one small powerplay fix and one regression fix for older PX systems and d3cold

* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix power state when port pm is unavailable (v2)
  drm/amdgpu: fix power state when port pm is unavailable
  drm/amd/powerplay: avoid out of bounds access on array ps.

xc2028: Fix use-after-free bug properly

The commit 8dfbcc4351a0 ("[media] xc2028: avoid use after free") tried
to address the reported use-after-free by clearing the reference.

However, it's clearing the wrong pointer; it sets NULL to
priv->ctrl.fname, but it's anyway overwritten by the next line
memcpy(&priv->ctrl, p, sizeof(priv->ctrl)).

OTOH, the actual code accessing the freed string is the strcmp() call
with priv->fname:
if (!firmware_name[0] && p->fname &&
priv->fname && strcmp(p->fname, priv->fname))
free_firmware(priv);

where priv->fname points to the previous file name, and this was
already freed by kfree().

For fixing the bug properly, this patch does the following:

- Keep the copy of firmware file name in only priv->fname,
priv->ctrl.fname isn't changed;
- The allocation is done only when the firmware gets loaded;
- The kfree() is called in free_firmware() commonly

Fixes: commit 8dfbcc4351a0 ('[media] xc2028: avoid use after free')
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Merge tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client bugfixes from Anna Schumaker:
"Most of these fix regressions or races, but there is one patch for
  stable that Arnd sent me

  Stable bugfix:
   - Hide array-bounds warning

  Bugfixes:
   - Keep a reference on lock states while checking
   - Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
   - Don't call close if the open stateid has already been cleared
   - Fix CLOSE rases with OPEN
   - Fix a regression in DELEGRETURN"

* tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.x: hide array-bounds warning
  NFSv4.1: Keep a reference on lock states while checking
  NFSv4.1: Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
  NFSv4: Don't call close if the open stateid has already been cleared
  NFSv4: Fix CLOSE races with OPEN
  NFSv4.1: Fix a regression in DELEGRETURN

Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile

Pull arch/tile bugfix from Chris Metcalf:
"This fixes a bug that causes reboots after 208 days of uptime :-)"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: avoid using clocksource_cyc2ns with absolute cycle count

tile: avoid using clocksource_cyc2ns with absolute cycle count

For large values of "mult" and long uptimes, the intermediate
result of "cycles * mult" can overflow 64 bits.  For example,
the tile platform calls clocksource_cyc2ns with a 1.2 GHz clock;
we have mult = 853, and after 208.5 days, we overflow 64 bits.

Since clocksource_cyc2ns() is intended to be used for relative
cycle counts, not absolute cycle counts, performance is more
importance than accepting a wider range of cycle values.  So,
just use mult_frac() directly in tile's sched_clock().

Commit 4cecf6d401a0 ("sched, x86: Avoid unnecessary overflow
in sched_clock") by Salman Qazi results in essentially the same
generated code for x86 as this change does for tile.  In fact,
a follow-on change by Salman introduced mult_frac() and switched
to using it, so the C code was largely identical at that point too.

Peter Zijlstra then added mul_u64_u32_shr() and switched x86
to use it.  This is, in principle, better; by optimizing the
64x64->64 multiplies to be 32x32->64 multiplies we can potentially
save some time.  However, the compiler piplines the 64x64->64
multiplies pretty well, and the conditional branch in the generic
mul_u64_u32_shr() causes some bubbles in execution, with the
result that it's pretty much a wash.  If tilegx provided its own
implementation of mul_u64_u32_shr() without the conditional branch,
we could potentially save 3 cycles, but that seems like small gain
for a fair amount of additional build scaffolding; no other platform
currently provides a mul_u64_u32_shr() override, and tile doesn't
currently have an <asm/div64.h> header to put the override in.

Additionally, gcc currently has an optimization bug that prevents
it from recognizing the opportunity to use a 32x32->64 multiply,
and so the result would be no better than the existing mult_frac()
until such time as the compiler is fixed.

For now, just using mult_frac() seems like the right answer.

Cc: stable@kernel.org [v3.4+]
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>

drm/radeon: fix power state when port pm is unavailable (v2)

When PCIe port PM is not enabled (system BIOS is pre-2015 or the
pcie_port_pm=off parameter is set), legacy ATPX PM should still be
marked as supported. Otherwise the GPU can fail to power on after
runtime suspend. This affected a Dell Inspiron 5548.

Ideally the BIOS date in the PCI core is lowered to 2013 (the first year
where hybrid graphics platforms using power resources was introduced),
but that seems more risky at this point and would not solve the
pcie_port_pm=off issue.

v2: agd: fix typo

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 4.8+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix power state when port pm is unavailable

When PCIe port PM is not enabled (system BIOS is pre-2015 or the
pcie_port_pm=off parameter is set), legacy ATPX PM should still be
marked as supported. Otherwise the GPU can fail to power on after
runtime suspend. This affected a Dell Inspiron 5548.

Ideally the BIOS date in the PCI core is lowered to 2013 (the first year
where hybrid graphics platforms using power resources was introduced),
but that seems more risky at this point and would not solve the
pcie_port_pm=off issue.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505
Reported-and-tested-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 4.8+
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>