serial: uartlite: fix exit path null pointer

commit a553add0846f355a28ed4e81134012e4a1e280c2 upstream.

Call uart_unregister_driver() conditionally instead of
unconditionally, only if it has been previously registered.

This uses driver.state, just as the sh-sci.c driver does.

Fixes this null pointer dereference in tty_unregister_driver(),
since the 'driver' argument is null:

  general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
  RIP: 0010:tty_unregister_driver+0x25/0x1d0

Fixes: 238b8721a554 ("[PATCH] serial uartlite driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Link: https://lore.kernel.org/r/9c8e6581-6fcc-a595-0897-4d90f5d710df@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ldusb: fix NULL-derefs on driver unbind

commit 58ecf131e74620305175a7aa103f81350bb37570 upstream.

The driver was using its struct usb_interface pointer as an inverted
disconnected flag, but was setting it to NULL before making sure all
completion handlers had run. This could lead to a NULL-pointer
dereference in a number of dev_dbg, dev_warn and dev_err statements in
the completion handlers which relies on said pointer.

Fix this by unconditionally stopping all I/O and preventing
resubmissions by poisoning the interrupt URBs at disconnect and using a
dedicated disconnected flag.

This also makes sure that all I/O has completed by the time the
disconnect callback returns.

Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009153848.8664-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: chaoskey: fix use-after-free on release

commit 93ddb1f56ae102f14f9e46a9a9c8017faa970003 upstream.

The driver was accessing its struct usb_interface in its release()
callback without holding a reference. This would lead to a
use-after-free whenever the device was disconnected while the character
device was still open.

Fixes: 66e3e591891d ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Cc: stable <stable@vger.kernel.org> # 4.1
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009153848.8664-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usblp: fix runtime PM after driver unbind

commit 9a31535859bfd8d1c3ed391f5e9247cd87bb7909 upstream.

Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.

Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.

Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191001084908.2003-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: iowarrior: fix use-after-free after driver unbind

commit b5f8d46867ca233d773408ffbe691a8062ed718f upstream.

Make sure to stop also the asynchronous write URBs on disconnect() to
avoid use-after-free in the completion handler after driver unbind.

Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Cc: stable <stable@vger.kernel.org> # 2.6.21: 51a2f077c44e ("USB: introduce usb_anchor")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009104846.5925-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: iowarrior: fix use-after-free on release

commit 80cd5479b525093a56ef768553045741af61b250 upstream.

The driver was accessing its struct usb_interface from its release()
callback without holding a reference. This would lead to a
use-after-free whenever debugging was enabled and the device was
disconnected while its character device was open.

Fixes: 549e83500b80 ("USB: iowarrior: Convert local dbg macro to dev_dbg")
Cc: stable <stable@vger.kernel.org> # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009104846.5925-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: iowarrior: fix use-after-free on disconnect

commit edc4746f253d907d048de680a621e121517f484b upstream.

A recent fix addressing a deadlock on disconnect introduced a new bug
by moving the present flag out of the critical section protected by the
driver-data mutex. This could lead to a racing release() freeing the
driver data before disconnect() is done with it.

Due to insufficient locking a related use-after-free could be triggered
also before the above mentioned commit. Specifically, the driver needs
to hold the driver-data mutex also while checking the opened flag at
disconnect().

Fixes: c468a8aa790e ("usb: iowarrior: fix deadlock on disconnect")
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Cc: stable <stable@vger.kernel.org> # 2.6.21
Reported-by: syzbot+0761012cebf7bdb38137@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009104846.5925-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: adutux: fix use-after-free on release

commit 123a0f125fa3d2104043697baa62899d9e549272 upstream.

The driver was accessing its struct usb_device in its release()
callback without holding a reference. This would lead to a
use-after-free whenever the device was disconnected while the character
device was still open.

Fixes: 66d4bc30d128 ("USB: adutux: remove custom debug macro")
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009153848.8664-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: adutux: fix NULL-derefs on disconnect

commit b2fa7baee744fde746c17bc1860b9c6f5c2eebb7 upstream.

The driver was using its struct usb_device pointer as an inverted
disconnected flag, but was setting it to NULL before making sure all
completion handlers had run. This could lead to a NULL-pointer
dereference in a number of dev_dbg statements in the completion handlers
which relies on said pointer.

The pointer was also dereferenced unconditionally in a dev_dbg statement
release() something which would lead to a NULL-deref whenever a device
was disconnected before the final character-device close if debugging
was enabled.

Fix this by unconditionally stopping all I/O and preventing
resubmissions by poisoning the interrupt URBs at disconnect and using a
dedicated disconnected flag.

This also makes sure that all I/O has completed by the time the
disconnect callback returns.

Fixes: 1ef37c6047fe ("USB: adutux: remove custom debug macro and module parameter")
Fixes: 66d4bc30d128 ("USB: adutux: remove custom debug macro")
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190925092913.8608-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: adutux: fix use-after-free on disconnect

commit 44efc269db7929f6275a1fa927ef082e533ecde0 upstream.

The driver was clearing its struct usb_device pointer, which it used as
an inverted disconnected flag, before deregistering the character device
and without serialising against racing release().

This could lead to a use-after-free if a racing release() callback
observes the cleared pointer and frees the driver data before
disconnect() is finished with it.

This could also lead to NULL-pointer dereferences in a racing open().

Fixes: f08812d5eb8f ("USB: FIx locks and urb->status in adutux (updated)")
Cc: stable <stable@vger.kernel.org> # 2.6.24
Reported-by: syzbot+0243cb250a51eeefb8cc@syzkaller.appspotmail.com
Tested-by: syzbot+0243cb250a51eeefb8cc@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190925092913.8608-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Increase STS_SAVE timeout in xhci_suspend()

commit ac343366846a445bb81f0a0e8f16abb8bd5d5d88 upstream.

After commit f7fac17ca925 ("xhci: Convert xhci_handshake() to use
readl_poll_timeout_atomic()"), ASMedia xHCI may fail to suspend.

Although the algorithms are essentially the same, the old max timeout is
(usec + usec * time of doing readl()), and the new max timeout is just
usec, which is much less than the old one.

Increase the timeout to make ASMedia xHCI able to suspend again.

BugLink: https://bugs.launchpad.net/bugs/1844021
Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-8-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Prevent deadlock when xhci adapter breaks during init

commit 8de66b0e6a56ff10dd00d2b0f2ae52e300178587 upstream.

The system can hit a deadlock if an xhci adapter breaks while initializing.
The deadlock is between two threads: thread 1 is tearing down the
adapter and is stuck in usb_unlocked_disable_lpm waiting to lock the
hcd->handwidth_mutex. Thread 2 is holding this mutex (while still trying
to add a usb device), but is stuck in xhci_endpoint_reset waiting for a
stop or config command to complete. A reboot is required to resolve.

It turns out when calling xhci_queue_stop_endpoint and
xhci_queue_configure_endpoint in xhci_endpoint_reset, the return code is
not checked for errors. If the timing is right and the adapter dies just
before either of these commands get issued, we hang indefinitely waiting
for a completion on a command that didn't get issued.

This wasn't a problem before the following fix because we didn't send
commands in xhci_endpoint_reset:

commit f5249461b504 ("xhci: Clear the host side toggle manually when
    endpoint is soft reset")

With the patch I am submitting, a duration test which breaks adapters
during initialization (and which deadlocks with the standard kernel) runs
without issue.

Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: Torez Smith <torez@redhat.com>
Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com>
Signed-off-by: Torez Smith <torez@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-7-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: wait for CNR controller not ready bit in xhci resume

commit a70bcbc322837eda1ab5994d12db941dc9733a7d upstream.

NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold.
Thus we need to wait for CNR bit to clear in xhci resume, just as in
xhci init.

[Minor changes to comment and commit message -Mathias]
Cc: <stable@vger.kernel.org>
Signed-off-by: Rick Tseng <rtseng@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-6-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix USB 3.1 capability detection on early xHCI 1.1 spec based hosts

commit 47f50d61076523e1a0d5a070062c2311320eeca8 upstream.

Early xHCI 1.1 spec did not mention USB 3.1 capable hosts should set
sbrn to 0x31, or that the minor revision is a two digit BCD
containing minor and sub-minor numbers.
This was later clarified in xHCI 1.2.

Some USB 3.1 capable hosts therefore have sbrn set to 0x30, or minor
revision set to 0x1 instead of 0x10.

Detect the USB 3.1 capability correctly for these hosts as well

Fixes: ddd57980a0fd ("xhci: detect USB 3.2 capable host controllers correctly")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Loïc Yhuel <loic.yhuel@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-5-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Check all endpoints for LPM timeout

commit d500c63f80f2ea08ee300e57da5f2af1c13875f5 upstream.

If an endpoint is encountered that returns USB3_LPM_DEVICE_INITIATED, keep
checking further endpoints, as there might be periodic endpoints later
that return USB3_LPM_DISABLED due to shorter service intervals.

Without this, the code can set too high a maximum-exit-latency and
prevent the use of multiple USB3 cameras that should be able to work.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Schmidt <jan@centricular.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-4-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Prevent device initiated U1/U2 link pm if exit latency is too long

commit cd9d9491e835a845c1a98b8471f88d26285e0bb9 upstream.

If host/hub initiated link pm is prevented by a driver flag we still must
ensure that periodic endpoints have longer service intervals than link pm
exit latency before allowing device initiated link pm.

Fix this by continue walking and checking endpoint service interval if
xhci_get_timeout_no_hub_lpm() returns anything else than USB3_LPM_DISABLED

While at it fix the split line error message

Tested-by: Jan Schmidt <jan@centricular.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-3-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix false warning message about wrong bounce buffer write length

commit c03101ff4f74bb30679c1a03d551ecbef1024bf6 upstream.

The check printing out the "WARN Wrong bounce buffer write length:"
uses incorrect values when comparing bytes written from scatterlist
to bounce buffer. Actual copied lengths are fine.

The used seg->bounce_len will be set to equal new_buf_len a few lines later
in the code, but is incorrect when doing the comparison.

The patch which added this false warning was backported to 4.8+ kernels
so this should be backported as far as well.

Cc: <stable@vger.kernel.org> # v4.8+
Fixes: 597c56e372da ("xhci: update bounce buffer with correct sg num")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-2-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usb-skeleton: fix NULL-deref on disconnect

commit bed5ef230943863b9abf5eae226a20fad9a8ff71 upstream.

The driver was using its struct usb_interface pointer as an inverted
disconnected flag and was setting it to NULL before making sure all
completion handlers had run. This could lead to NULL-pointer
dereferences in the dev_err() statements in the completion handlers
which relies on said pointer.

Fix this by using a dedicated disconnected flag.

Note that this is also addresses a NULL-pointer dereference at release()
and a struct usb_interface reference leak introduced by a recent runtime
PM fix, which depends on and should have been submitted together with
this patch.

Fixes: 4212cd74ca6f ("USB: usb-skeleton.c: remove err() usage")
Fixes: 5c290a5e42c3 ("USB: usb-skeleton: fix runtime PM after driver unbind")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009170944.30057-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usb-skeleton: fix runtime PM after driver unbind

commit 5c290a5e42c3387e82de86965784d30e6c5270fd upstream.

Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.

Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.

Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191001084908.2003-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: yurex: fix NULL-derefs on disconnect

commit aafb00a977cf7d81821f7c9d12e04c558c22dc3c upstream.

The driver was using its struct usb_interface pointer as an inverted
disconnected flag, but was setting it to NULL without making sure all
code paths that used it were done with it.

Before commit ef61eb43ada6 ("USB: yurex: Fix protection fault after
device removal") this included the interrupt-in completion handler, but
there are further accesses in dev_err and dev_dbg statements in
yurex_write() and the driver-data destructor (sic!).

Fix this by unconditionally stopping also the control URB at disconnect
and by using a dedicated disconnected flag.

Note that we need to take a reference to the struct usb_interface to
avoid a use-after-free in the destructor whenever the device was
disconnected while the character device was still open.

Fixes: aadd6472d904 ("USB: yurex.c: remove dbg() usage")
Fixes: 45714104b9e8 ("USB: yurex.c: remove err() usage")
Cc: stable <stable@vger.kernel.org> # 3.5: ef61eb43ada6
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009153848.8664-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: yurex: Don't retry on unexpected errors

commit 32a0721c6620b77504916dac0cea8ad497c4878a upstream.

According to Greg KH, it has been generally agreed that when a USB
driver encounters an unknown error (or one it can't handle directly),
it should just give up instead of going into a potentially infinite
retry loop.

The three codes -EPROTO, -EILSEQ, and -ETIME fall into this category.
They can be caused by bus errors such as packet loss or corruption,
attempting to communicate with a disconnected device, or by malicious
firmware.  Nowadays the extent of packet loss or corruption is
negligible, so it should be safe for a driver to give up whenever one
of these errors occurs.

Although the yurex driver handles -EILSEQ errors in this way, it
doesn't do the same for -EPROTO (as discovered by the syzbot fuzzer)
or other unrecognized errors.  This patch adjusts the driver so that
it doesn't log an error message for -EPROTO or -ETIME, and it doesn't
retry after any errors.

Reported-and-tested-by: syzbot+b24d736f18a1541ad550@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1909171245410.1590-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: rio500: Remove Rio 500 kernel driver

commit 015664d15270a112c2371d812f03f7c579b35a73 upstream.

The Rio500 kernel driver has not been used by Rio500 owners since 2001
not long after the rio500 project added support for a user-space USB stack
through the very first versions of usbdevfs and then libusb.

Support for the kernel driver was removed from the upstream utilities
in 2008:
https://gitlab.freedesktop.org/hadess/rio500/commit/943f624ab721eb8281c287650fcc9e2026f6f5db

Cc: Cesar Miquel <miquel@df.uba.ar>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: use EINVAL for superblock with invalid magic

[ Upstream commit 38fb6d0ea34299d97b031ed64fe994158b6f8eb3 ]

The kernel mount_block_root() function expects -EACESS or -EINVAL for a
unmountable filesystem when trying to mount the root with different
filesystem types.

However, in 5.3-rc1 the behavior when F2FS code cannot find valid block
changed to return -EFSCORRUPTED(-EUCLEAN), and this error code makes
mount_block_root() fail when trying to probe F2FS.

When the magic number of the superblock mismatches, it has a high
probability that it's just not a F2FS. In this case return -EINVAL seems
to be a better result, and this return value can make mount_block_root()
probing work again.

Return -EINVAL when the superblock has magic mismatch, -EFSCORRUPTED in
other cases (the magic matches but the superblock cannot be recognized).

Fixes: 10f966bbf521 ("f2fs: use generic EFSBADCRC/EFSCORRUPTED")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

panic: ensure preemption is disabled during panic()

commit 20bb759a66be52cf4a9ddd17fddaf509e11490cd upstream.

Calling 'panic()' on a kernel with CONFIG_PREEMPT=y can leave the
calling CPU in an infinite loop, but with interrupts and preemption
enabled.  From this state, userspace can continue to be scheduled,
despite the system being "dead" as far as the kernel is concerned.

This is easily reproducible on arm64 when booting with "nosmp" on the
command line; a couple of shell scripts print out a periodic "Ping"
message whilst another triggers a crash by writing to
/proc/sysrq-trigger:

  | sysrq: Trigger a crash
  | Kernel panic - not syncing: sysrq triggered crash
  | CPU: 0 PID: 1 Comm: init Not tainted 5.2.15 #1
  | Hardware name: linux,dummy-virt (DT)
  | Call trace:
  |  dump_backtrace+0x0/0x148
  |  show_stack+0x14/0x20
  |  dump_stack+0xa0/0xc4
  |  panic+0x140/0x32c
  |  sysrq_handle_reboot+0x0/0x20
  |  __handle_sysrq+0x124/0x190
  |  write_sysrq_trigger+0x64/0x88
  |  proc_reg_write+0x60/0xa8
  |  __vfs_write+0x18/0x40
  |  vfs_write+0xa4/0x1b8
  |  ksys_write+0x64/0xf0
  |  __arm64_sys_write+0x14/0x20
  |  el0_svc_common.constprop.0+0xb0/0x168
  |  el0_svc_handler+0x28/0x78
  |  el0_svc+0x8/0xc
  | Kernel Offset: disabled
  | CPU features: 0x0002,24002004
  | Memory Limit: none
  | ---[ end Kernel panic - not syncing: sysrq triggered crash ]---
  |  Ping 2!
  |  Ping 1!
  |  Ping 1!
  |  Ping 2!

The issue can also be triggered on x86 kernels if CONFIG_SMP=n,
otherwise local interrupts are disabled in 'smp_send_stop()'.

Disable preemption in 'panic()' before re-enabling interrupts.

Link: http://lkml.kernel.org/r/20191002123538.22609-1-will@kernel.org
Link: https://lore.kernel.org/r/BX1W47JXPMR8.58IYW53H6M5N@dragonstone
Signed-off-by: Will Deacon <will@kernel.org>
Reported-by: Xogium <contact@xogium.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.79

nl80211: validate beacon head

commit f88eb7c0d002a67ef31aeb7850b42ff69abc46dc upstream.

We currently don't validate the beacon head, i.e. the header,
fixed part and elements that are to go in front of the TIM
element. This means that the variable elements there can be
malformed, e.g. have a length exceeding the buffer size, but
most downstream code from this assumes that this has already
been checked.

Add the necessary checks to the netlink policy.

Cc: stable@vger.kernel.org
Fixes: ed1b6cc7f80f ("cfg80211/nl80211: add beacon settings")
Link: https://lore.kernel.org/r/1569009255-I7ac7fbe9436e9d8733439eab8acbbd35e55c74ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: Use const more consistently in for_each_element macros

commit 7388afe09143210f555bdd6c75035e9acc1fab96 upstream.

Enforce the first argument to be a correct type of a pointer to struct
element and avoid unnecessary typecasts from const to non-const pointers
(the change in validate_ie_attr() is needed to make this part work). In
addition, avoid signed/unsigned comparison within for_each_element() and
mark struct element packed just in case.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: add and use strongly typed element iteration macros

commit 0f3b07f027f87a38ebe5c436490095df762819be upstream.

Rather than always iterating elements from frames with pure
u8 pointers, add a type "struct element" that encapsulates
the id/datalen/data format of them.

Then, add the element iteration macros
 * for_each_element
 * for_each_element_id
 * for_each_element_extid

which take, as their first 'argument', such a structure and
iterate through a given u8 array interpreting it as elements.

While at it and since we'll need it, also add
 * for_each_subelement
 * for_each_subelement_id
 * for_each_subelement_extid

which instead of taking data/length just take an outer element
and use its data/datalen.

Also add for_each_element_completed() to determine if any of
the loops above completed, i.e. it was able to parse all of
the elements successfully and no data remained.

Use for_each_element_id() in cfg80211_find_ie_match() as the
first user of this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: detect potential multiref due to corrupted images

commit e12a0ce2fa69798194f3a8628baf6edfbd5c548f upstream.

As reported by erofs-utils fuzzer, currently, multiref
(ondisk deduplication) hasn't been supported for now,
we should forbid it properly.

Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190821140152.229648-1-gaoxiang25@huawei.com
[ Gao Xiang: Since earlier kernels don't define EFSCORRUPTED,
             let's use EIO instead. ]
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: add two missing erofs_workgroup_put for corrupted images

commit 138e1a0990e80db486ab9f6c06bd5c01f9a97999 upstream.

As reported by erofs-utils fuzzer, these error handling
path will be entered to handle corrupted images.

Lack of erofs_workgroup_puts will cause unmounting
unsuccessfully.

Fix these return values to EFSCORRUPTED as well.

Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190819103426.87579-4-gaoxiang25@huawei.com
[ Gao Xiang: Older kernel versions don't have length validity check
             and EFSCORRUPTED, thus backport pageofs check for now. ]
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: some compressed cluster should be submitted for corrupted images

commit ee45197c807895e156b2be0abcaebdfc116487c8 upstream.

As reported by erofs_utils fuzzer, a logical page can belong
to at most 2 compressed clusters, if one compressed cluster
is corrupted, but the other has been ready in submitting chain.

The chain needs to submit anyway in order to keep the page
working properly (page unlocked with PG_error set, PG_uptodate
not set).

Let's fix it now.

Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190819103426.87579-2-gaoxiang25@huawei.com
[ Gao Xiang: Manually backport to v4.19.y stable. ]
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: fix an error handling in erofs_readdir()

commit acb383f1dcb4f1e79b66d4be3a0b6f519a957b0d upstream.

Richard observed a forever loop of erofs_read_raw_page() [1]
which can be generated by forcely setting ->u.i_blkaddr
to 0xdeadbeef (as my understanding block layer can
handle access beyond end of device correctly).

After digging into that, it seems the problem is highly
related with directories and then I found the root cause
is an improper error handling in erofs_readdir().

Let's fix it now.

[1] https://lore.kernel.org/r/1163995781.68824.1566084358245.JavaMail.zimbra@nod.at/

Reported-by: Richard Weinberger <richard@nod.at>
Fixes: 3aa8ec716e52 ("staging: erofs: add directory operations")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190818125457.25906-1-hsiangkao@aol.com
[ Gao Xiang: Since earlier kernels don't define EFSCORRUPTED,
             let's use original error code instead. ]
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: etm4x: Use explicit barriers on enable/disable

commit 1004ce4c255fc3eb3ad9145ddd53547d1b7ce327 upstream.

Synchronization is recommended before disabling the trace registers
to prevent any start or stop points being speculative at the point
of disabling the unit (section 7.3.77 of ARM IHI 0064D).

Synchronization is also recommended after programming the trace
registers to ensure all updates are committed prior to normal code
resuming (section 4.3.7 of ARM IHI 0064D).

Let's ensure these syncronization points are present in the code
and clearly commented.

Note that we could rely on the barriers in CS_LOCK and
coresight_disclaim_device_unlocked or the context switch to user
space - however coresight may be of use in the kernel.

On armv8 the mb macro is defined as dsb(sy) - Given that the etm4x is
only used on armv8 let's directly use dsb(sy) instead of mb(). This
removes some ambiguity and makes it easier to correlate the code with
the TRM.

Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed capital letter for "use" in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-11-mathieu.poirier@linaro.org
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfs: Fix EOVERFLOW testing in put_compat_statfs64

commit cc3a7bfe62b947b423fcb2cfe89fcba92bf48fa3 upstream.

Today, put_compat_statfs64() disallows nearly any field value over
2^32 if f_bsize is only 32 bits, but that makes no sense.
compat_statfs64 is there for the explicit purpose of providing 64-bit
fields for f_files, f_ffree, etc.  And f_bsize is always only 32 bits.

As a result, 32-bit userspace gets -EOVERFLOW for i.e.  large file
counts even with -D_FILE_OFFSET_BITS=64 set.

In reality, only f_bsize and f_frsize can legitimately overflow
(fields like f_type and f_namelen should never be large), so test
only those fields.

This bug was discussed at length some time ago, and this is the proposal
Al suggested at https://lkml.org/lkml/2018/8/6/640.  It seemed to get
dropped amid the discussion of other related changes, but this
part seems obviously correct on its own, so I've picked it up and
sent it, for expediency.

Fixes: 64d2ab32efe3 ("vfs: fix put_compat_statfs64() does not handle errors")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/speculation: Support 'mitigations=' cmdline option

commit a111b7c0f20e13b54df2fa959b3dc0bdf1925ae6 upstream.

Configure arm64 runtime CPU speculation bug mitigations in accordance
with the 'mitigations=' cmdline option.  This affects Meltdown, Spectre
v2, and Speculative Store Bypass.

The default behavior is unchanged.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
[will: reorder checks so KASLR implies KPTI and SSBS is affected by cmdline]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Use firmware to detect CPUs that are not affected by Spectre-v2

commit 517953c2c47f9c00a002f588ac856a5bc70cede3 upstream.

The SMCCC ARCH_WORKAROUND_1 service can indicate that although the
firmware knows about the Spectre-v2 mitigation, this particular
CPU is not vulnerable, and it is thus not necessary to call
the firmware on this CPU.

Let's use this information to our benefit.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Force SSBS on context switch

[ Upstream commit cbdf8a189a66001c36007bf0f5c975d0376c5c3a ]

On a CPU that doesn't support SSBS, PSTATE[12] is RES0.  In a system
where only some of the CPUs implement SSBS, we end-up losing track of
the SSBS bit across task migration.

To address this issue, let's force the SSBS bit on context switch.

Fixes: 8f04e8e6e29c ("arm64: ssbd: Add support for PSTATE.SSBS rather than trapping to EL3")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[will: inverted logic and added comments]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB

[ Upstream commit eb337cdfcd5dd3b10522c2f34140a73a4c285c30 ]

SSBS provides a relatively cheap mitigation for SSB, but it is still a
mitigation and its presence does not indicate that the CPU is unaffected
by the vulnerability.

Tweak the mitigation logic so that we report the correct string in sysfs.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: add sysfs vulnerability show for speculative store bypass

[ Upstream commit 526e065dbca6df0b5a130b84b836b8b3c9f54e21 ]

Return status based on ssbd_state and __ssb_safe. If the
mitigation is disabled, or the firmware isn't responding then
return the expected machine state based on a whitelist of known
good cores.

Given a heterogeneous machine, the overall machine vulnerability
defaults to safe but is reset to unsafe when we miss the whitelist
and the firmware doesn't explicitly tell us the core is safe.
In order to make that work we delay transitioning to vulnerable
until we know the firmware isn't responding to avoid a case
where we miss the whitelist, but the firmware goes ahead and
reports the core is not vulnerable. If all the cores in the
machine have SSBS, then __ssb_safe will remain true.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: add sysfs vulnerability show for spectre-v2

[ Upstream commit d2532e27b5638bb2e2dd52b80b7ea2ec65135377 ]

Track whether all the cores in the machine are vulnerable to Spectre-v2,
and whether all the vulnerable cores have been mitigated. We then expose
this information to userspace via sysfs.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Always enable spectre-v2 vulnerability detection

[ Upstream commit 8c1e3d2bb44cbb998cb28ff9a18f105fee7f1eb3 ]

Ensure we are always able to detect whether or not the CPU is affected
by Spectre-v2, so that we can later advertise this to userspace.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Advertise mitigation of Spectre-v2, or lack thereof

[ Upstream commit 73f38166095947f3b86b02fbed6bd592223a7ac8 ]

We currently have a list of CPUs affected by Spectre-v2, for which
we check that the firmware implements ARCH_WORKAROUND_1. It turns
out that not all firmwares do implement the required mitigation,
and that we fail to let the user know about it.

Instead, let's slightly revamp our checks, and rely on a whitelist
of cores that are known to be non-vulnerable, and let the user know
the status of the mitigation in the kernel log.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Provide a command line to disable spectre_v2 mitigation

[ Upstream commit e5ce5e7267ddcbe13ab9ead2542524e1b7993e5a ]

There are various reasons, such as benchmarking, to disable spectrev2
mitigation on a machine. Provide a command-line option to do so.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Always enable ssb vulnerability detection

[ Upstream commit d42281b6e49510f078ace15a8ea10f71e6262581 ]

Ensure we are always able to detect whether or not the CPU is affected
by SSB, so that we can later advertise this to userspace.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
[will: Use IS_ENABLED instead of #ifdef]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: enable generic CPU vulnerabilites support

[ Upstream commit 61ae1321f06c4489c724c803e9b8363dea576da3 ]

Enable CPU vulnerabilty show functions for spectre_v1, spectre_v2,
meltdown and store-bypass.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: add sysfs vulnerability show for meltdown

[ Upstream commit 1b3ccf4be0e7be8c4bd8522066b6cbc92591e912 ]

We implement page table isolation as a mitigation for meltdown.
Report this to userspace via sysfs.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add sysfs vulnerability show for spectre-v1

[ Upstream commit 3891ebccace188af075ce143d8b072b65e90f695 ]

spectre-v1 has been mitigated and the mitigation is always active.
Report this to userspace via sysfs

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: fix SSBS sanitization

[ Upstream commit f54dada8274643e3ff4436df0ea124aeedc43cae ]

In valid_user_regs() we treat SSBS as a RES0 bit, and consequently it is
unexpectedly cleared when we restore a sigframe or fiddle with GPRs via
ptrace.

This patch fixes valid_user_regs() to account for this, updating the
function to refer to the latest ARM ARM (ARM DDI 0487D.a). For AArch32
tasks, SSBS appears in bit 23 of SPSR_EL1, matching its position in the
AArch32-native PSR format, and we don't need to translate it as we have
to for DIT.

There are no other bit assignments that we need to account for today.
As the recent documentation describes the DIT bit, we can drop our
comment regarding DIT.

While removing SSBS from the RES0 masks, existing inconsistent
whitespace is corrected.

Fixes: d71be2b6c0e19180 ("arm64: cpufeature: Detect SSBS and advertise to userspace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: docs: Document SSBS HWCAP

[ Upstream commit ee91176120bd584aa10c564e7e9fdcaf397190a1 ]

We advertise the MRS/MSR instructions for toggling SSBS at EL0 using an
HWCAP, so document it along with the others.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Set SCTLR_EL2.DSSBS if SSBD is forcefully disabled and !vhe

[ Upstream commit 7c36447ae5a090729e7b129f24705bb231a07e0b ]

When running without VHE, it is necessary to set SCTLR_EL2.DSSBS if SSBD
has been forcefully disabled on the kernel command-line.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: ssbd: Add support for PSTATE.SSBS rather than trapping to EL3

[ Upstream commit 8f04e8e6e29c93421a95b61cad62e3918425eac7 ]

On CPUs with support for PSTATE.SSBS, the kernel can toggle the SSBD
state without needing to call into firmware.

This patch hooks into the existing SSBD infrastructure so that SSBS is
used on CPUs that support it, but it's all made horribly complicated by
the very real possibility of big/little systems that don't uniformly
provide the new capability.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Avoid interrupts being erroneously enabled in handle_exception()

[ Upstream commit c82dd6d078a2bb29d41eda032bb96d05699a524d ]

When the handle_exception function addresses an exception, the interrupts
will be unconditionally enabled after finishing the context save. However,
It may erroneously enable the interrupts if the interrupts are disabled
before entering the handle_exception.

For example, one of the WARN_ON() condition is satisfied in the scheduling
where the interrupt is disabled and rq.lock is locked. The WARN_ON will
trigger a break exception and the handle_exception function will enable the
interrupts before entering do_trap_break function. During the procedure, if
a timer interrupt is pending, it will be taken when interrupts are enabled.
In this case, it may cause a deadlock problem if the rq.lock is locked
again in the timer ISR.

Hence, the handle_exception() can only enable interrupts when the state of
sstatus.SPIE is 1.

This patch is tested on HiFive Unleashed board.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: updated to apply]
Fixes: bcae803a21317 ("RISC-V: Enable IRQ during exception handling")
Cc: David Abdurachmanov <david.abdurachmanov@sifive.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Reset previous counts on repeat with interval

[ Upstream commit b63fd11cced17fcb8e133def29001b0f6aaa5e06 ]

When using 'perf stat' with repeat and interval option, it shows wrong
values for events.

The wrong values will be shown for the first interval on the second and
subsequent repetitions.

Without the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.000282489                 53      faults
     2.000282489                513      sched:sched_switch
     4.005478208              3,721      faults
     4.005478208              2,666      sched:sched_switch
     5.025470933                395      faults
     5.025470933              1,307      sched:sched_switch
     2.009602825 1,84,46,74,40,73,70,95,47,520      faults  <------
     2.009602825 1,84,46,74,40,73,70,95,49,568      sched:sched_switch  <------
     4.019612206              4,730      faults
     4.019612206              2,746      sched:sched_switch
     5.039615484              3,953      faults
     5.039615484              1,496      sched:sched_switch
     2.000274620 1,84,46,74,40,73,70,95,47,520      faults <------
     2.000274620 1,84,46,74,40,73,70,95,47,520      sched:sched_switch <------
     4.000480342              4,282      faults
     4.000480342              2,303      sched:sched_switch
     5.000916811              1,322      faults
     5.000916811              1,064      sched:sched_switch
  #

prev_raw_counts is allocated when using intervals. This is used when
calculating the difference in the counts of events when using interval.

The current counts are stored in prev_raw_counts to calculate the
differences in the next iteration.

On the first interval of the second and subsequent repetitions,
prev_raw_counts would be the values stored in the last interval of the
previous repetitions, while the current counts will only be for the
first interval of the current repetition.

Hence there is a possibility of events showing up as big number.

Fix this by resetting prev_raw_counts whenever perf stat repeats the
command.

With the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.019349347              2,597      faults
     2.019349347              2,753      sched:sched_switch
     4.019577372              3,098      faults
     4.019577372              2,532      sched:sched_switch
     5.019415481              1,879      faults
     5.019415481              1,356      sched:sched_switch
     2.000178813              8,468      faults
     2.000178813              2,254      sched:sched_switch
     4.000404621              7,440      faults
     4.000404621              1,266      sched:sched_switch
     5.040196079              2,458      faults
     5.040196079                556      sched:sched_switch
     2.000191939              6,870      faults
     2.000191939              1,170      sched:sched_switch
     4.000414103                541      faults
     4.000414103                902      sched:sched_switch
     5.000809863                450      faults
     5.000809863                364      sched:sched_switch
  #

Committer notes:

This was broken since the cset introducing the --interval feature, i.e.
--repeat + --interval wasn't tested at that point, add the Fixes tag so
that automatic scripts can pick this up.

Fixes: 13370a9b5bb8 ("perf stat: Add interval printing")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org # v3.9+
Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com
[ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix segfault in cpu_cache_level__read()

[ Upstream commit 0216234c2eed1367a318daeb9f4a97d8217412a0 ]

We release wrong pointer on error path in cpu_cache_level__read
function, leading to segfault:

  (gdb) r record ls
  Starting program: /root/perf/tools/perf/perf record ls
  ...
  [ perf record: Woken up 1 times to write data ]
  double free or corruption (out)

  Thread 1 "perf" received signal SIGABRT, Aborted.
  0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6
  (gdb) bt
  #0  0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6
  #1  0x00007ffff7443bac in abort () from /lib64/power9/libc.so.6
  #2  0x00007ffff74af8bc in __libc_message () from /lib64/power9/libc.so.6
  #3  0x00007ffff74b92b8 in malloc_printerr () from /lib64/power9/libc.so.6
  #4  0x00007ffff74bb874 in _int_free () from /lib64/power9/libc.so.6
  #5  0x0000000010271260 in __zfree (ptr=0x7fffffffa0b0) at ../../lib/zalloc..
  #6  0x0000000010139340 in cpu_cache_level__read (cache=0x7fffffffa090, cac..
  #7  0x0000000010143c90 in build_caches (cntp=0x7fffffffa118, size=<optimiz..
  ...

Releasing the proper pointer.

Fixes: 720e98b5faf1 ("perf tools: Add perf data cache feature")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org: # v4.6+
Link: http://lore.kernel.org/lkml/20190912105235.10689-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tick: broadcast-hrtimer: Fix a race in bc_set_next

[ Upstream commit b9023b91dd020ad7e093baa5122b6968c48cc9e0 ]

When a cpu requests broadcasting, before starting the tick broadcast
hrtimer, bc_set_next() checks if the timer callback (bc_handler) is active
using hrtimer_try_to_cancel(). But hrtimer_try_to_cancel() does not provide
the required synchronization when the callback is active on other core.

The callback could have already executed tick_handle_oneshot_broadcast()
and could have also returned. But still there is a small time window where
the hrtimer_try_to_cancel() returns -1. In that case bc_set_next() returns
without doing anything, but the next_event of the tick broadcast clock
device is already set to a timeout value.

In the race condition diagram below, CPU #1 is running the timer callback
and CPU #2 is entering idle state and so calls bc_set_next().

In the worst case, the next_event will contain an expiry time, but the
hrtimer will not be started which happens when the racing callback returns
HRTIMER_NORESTART. The hrtimer might never recover if all further requests
from the CPUs to subscribe to tick broadcast have timeout greater than the
next_event of tick broadcast clock device. This leads to cascading of
failures and finally noticed as rcu stall warnings

Here is a depiction of the race condition

CPU #1 (Running timer callback)                   CPU #2 (Enter idle
                                                  and subscribe to
                                                  tick broadcast)
---------------------                             ---------------------

__run_hrtimer()                                   tick_broadcast_enter()

  bc_handler()                                      __tick_broadcast_oneshot_control()

    tick_handle_oneshot_broadcast()

      raw_spin_lock(&tick_broadcast_lock);

      dev->next_event = KTIME_MAX;                  //wait for tick_broadcast_lock
      //next_event for tick broadcast clock
      set to KTIME_MAX since no other cores
      subscribed to tick broadcasting

      raw_spin_unlock(&tick_broadcast_lock);

    if (dev->next_event == KTIME_MAX)
      return HRTIMER_NORESTART
    // callback function exits without
       restarting the hrtimer                      //tick_broadcast_lock acquired
                                                   raw_spin_lock(&tick_broadcast_lock);

                                                   tick_broadcast_set_event()

                                                     clockevents_program_event()

                                                       dev->next_event = expires;

                                                       bc_set_next()

                                                         hrtimer_try_to_cancel()
                                                         //returns -1 since the timer
                                                         callback is active. Exits without
                                                         restarting the timer
  cpu_base->running = NULL;

The comment that hrtimer cannot be armed from within the callback is
wrong. It is fine to start the hrtimer from within the callback. Also it is
safe to start the hrtimer from the enter/exit idle code while the broadcast
handler is active. The enter/exit idle code and the broadcast handler are
synchronized using tick_broadcast_lock. So there is no need for the
existing try to cancel logic. All this can be removed which will eliminate
the race condition as well.

Fixes: 5d1638acb9f6 ("tick: Introduce hrtimer based broadcast")
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Balasubramani Vivekanandan <balasubramani_vivekanandan@mentor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190926135101.12102-2-balasubramani_vivekanandan@mentor.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure

[ Upstream commit e0d2615856b2046c2e8d5bfd6933f37f69703b0b ]

If the re-allocation of tep->cmdlines succeeds, then the previous
allocation of tep->cmdlines will be freed. If we later fail in
add_new_comm(), we must not free cmdlines, and also should assign
tep->cmdlines to the new allocation. Otherwise when freeing tep, the
tep->cmdlines will be pointing to garbage.

Fixes: a6d2a61ac653a ("tools lib traceevent: Remove some die() calls")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag

commit 09ce98cacd51fcd0fa0af2f79d1e1d3192f4cbb0 upstream.

Rename the #define to indicate this is related to store vs tlbie
ordering issue. In the next patch, we will be adding another feature
flag that is used to handles ERAT flush vs tlbie ordering issue.

Fixes: a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pseries: Fix cpu_hotplug_lock acquisition in resize_hpt()

[ Upstream commit c784be435d5dae28d3b03db31753dd7a18733f0c ]

The calls to arch_add_memory()/arch_remove_memory() are always made
with the read-side cpu_hotplug_lock acquired via memory_hotplug_begin().
On pSeries, arch_add_memory()/arch_remove_memory() eventually call
resize_hpt() which in turn calls stop_machine() which acquires the
read-side cpu_hotplug_lock again, thereby resulting in the recursive
acquisition of this lock.

In the absence of CONFIG_PROVE_LOCKING, we hadn't observed a system
lockup during a memory hotplug operation because cpus_read_lock() is a
per-cpu rwsem read, which, in the fast-path (in the absence of the
writer, which in our case is a CPU-hotplug operation) simply
increments the read_count on the semaphore. Thus a recursive read in
the fast-path doesn't cause any problems.

However, we can hit this problem in practice if there is a concurrent
CPU-Hotplug operation in progress which is waiting to acquire the
write-side of the lock. This will cause the second recursive read to
block until the writer finishes. While the writer is blocked since the
first read holds the lock. Thus both the reader as well as the writers
fail to make any progress thereby blocking both CPU-Hotplug as well as
Memory Hotplug operations.

Memory-Hotplug CPU-Hotplug
CPU 0 CPU 1
------                                  ------

1. down_read(cpu_hotplug_lock.rw_sem)
   [memory_hotplug_begin]
2. down_write(cpu_hotplug_lock.rw_sem)
[cpu_up/cpu_down]
3. down_read(cpu_hotplug_lock.rw_sem)
   [stop_machine()]

Lockdep complains as follows in these code-paths.

 swapper/0/1 is trying to acquire lock:
 (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: stop_machine+0x2c/0x60

but task is already holding lock:
(____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(cpu_hotplug_lock.rw_sem);
   lock(cpu_hotplug_lock.rw_sem);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 3 locks held by swapper/0/1:
  #0: (____ptrval____) (&dev->mutex){....}, at: __driver_attach+0x12c/0x1b0
  #1: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50
  #2: (____ptrval____) (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x54/0x1a0

stack backtrace:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc5-58373-gbc99402235f3-dirty #166
 Call Trace:
   dump_stack+0xe8/0x164 (unreliable)
   __lock_acquire+0x1110/0x1c70
   lock_acquire+0x240/0x290
   cpus_read_lock+0x64/0xf0
   stop_machine+0x2c/0x60
   pseries_lpar_resize_hpt+0x19c/0x2c0
   resize_hpt_for_hotplug+0x70/0xd0
   arch_add_memory+0x58/0xfc
   devm_memremap_pages+0x5e8/0x8f0
   pmem_attach_disk+0x764/0x830
   nvdimm_bus_probe+0x118/0x240
   really_probe+0x230/0x4b0
   driver_probe_device+0x16c/0x1e0
   __driver_attach+0x148/0x1b0
   bus_for_each_dev+0x90/0x130
   driver_attach+0x34/0x50
   bus_add_driver+0x1a8/0x360
   driver_register+0x108/0x170
   __nd_driver_register+0xd0/0xf0
   nd_pmem_driver_init+0x34/0x48
   do_one_initcall+0x1e0/0x45c
   kernel_init_freeable+0x540/0x64c
   kernel_init+0x2c/0x160
   ret_from_kernel_thread+0x5c/0x68

Fix this issue by
  1) Requiring all the calls to pseries_lpar_resize_hpt() be made
     with cpu_hotplug_lock held.

  2) In pseries_lpar_resize_hpt() invoke stop_machine_cpuslocked()
     as a consequence of 1)

  3) To satisfy 1), in hpt_order_set(), call mmu_hash_ops.resize_hpt()
     with cpu_hotplug_lock held.

Fixes: dbcf929c0062 ("powerpc/pseries: Add support for hash table resizing")
Cc: stable@vger.kernel.org # v4.11+
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1557906352-29048-1-git-send-email-ego@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: fix crash when the blksize is zero

[ Upstream commit 553768d1169a48c0cd87c4eb4ab57534ee663415 ]

This will allow the blksize to be set zero and then use 1024 as
default.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
[fix to use goto out instead of return in genl_connect]
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: nVMX: Fix consistency check on injected exception error code

[ Upstream commit 567926cca99ba1750be8aae9c4178796bf9bb90b ]

Current versions of Intel's SDM incorrectly state that "bits 31:15 of
the VM-Entry exception error-code field" must be zero.  In reality, bits
31:16 must be zero, i.e. error codes are 16-bit values.

The bogus error code check manifests as an unexpected VM-Entry failure
due to an invalid code field (error number 7) in L1, e.g. when injecting
a #GP with error_code=0x9f00.

Nadav previously reported the bug[*], both to KVM and Intel, and fixed
the associated kvm-unit-test.

[*] https://patchwork.kernel.org/patch/11124749/

Reported-by: Nadav Amit <namit@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S HV: XIVE: Free escalation interrupts before disabling the VP

[ Upstream commit 237aed48c642328ff0ab19b63423634340224a06 ]

When a vCPU is brought done, the XIVE VP (Virtual Processor) is first
disabled and then the event notification queues are freed. When freeing
the queues, we check for possible escalation interrupts and free them
also.

But when a XIVE VP is disabled, the underlying XIVE ENDs also are
disabled in OPAL. When an END (Event Notification Descriptor) is
disabled, its ESB pages (ESn and ESe) are disabled and loads return all
1s. Which means that any access on the ESB page of the escalation
interrupt will return invalid values.

When an interrupt is freed, the shutdown handler computes a 'saved_p'
field from the value returned by a load in xive_do_source_set_mask().
This value is incorrect for escalation interrupts for the reason
described above.

This has no impact on Linux/KVM today because we don't make use of it
but we will introduce in future changes a xive_get_irqchip_state()
handler. This handler will use the 'saved_p' field to return the state
of an interrupt and 'saved_p' being incorrect, softlockup will occur.

Fix the vCPU cleanup sequence by first freeing the escalation interrupts
if any, then disable the XIVE VP and last free the queues.

Fixes: 90c73795afa2 ("KVM: PPC: Book3S HV: Add a new KVM device for the XIVE native exploitation mode")
Fixes: 5af50993850a ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806172538.5087-1-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: Bail earlier when radeon.cik_/si_support=0 is passed

[ Upstream commit 9dbc88d013b79c62bd845cb9e7c0256e660967c5 ]

Bail from the pci_driver probe function instead of from the drm_driver
load function.

This avoid /dev/dri/card0 temporarily getting registered and then
unregistered again, sending unwanted add / remove udev events to
userspace.

Specifically this avoids triggering the (userspace) bug fixed by this
plymouth merge-request:
https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59

Note that despite that being an userspace bug, not sending unnecessary
udev events is a good idea in general.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs

[ Upstream commit 8ce39eb5a67aee25d9f05b40b673c95b23502e3e ]

In nfp_flower_spawn_vnic_reprs in the loop if initialization or the
allocations fail memory is leaked. Appropriate releases are added.

Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf unwind: Fix libunwind build failure on i386 systems

[ Upstream commit 26acf400d2dcc72c7e713e1f55db47ad92010cc2 ]

Naresh Kamboju reported, that on the i386 build pr_err()
doesn't get defined properly due to header ordering:

  perf-in.o: In function `libunwind__x86_reg_id':
  tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109:
  undefined reference to `pr_err'

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/elfcore.c: include proper prototypes

[ Upstream commit 0f74914071ab7e7b78731ed62bf350e3a344e0a5 ]

When building with W=1, gcc properly complains that there's no prototypes:

  CC      kernel/elfcore.o
kernel/elfcore.c:7:17: warning: no previous prototype for 'elf_core_extra_phdrs' [-Wmissing-prototypes]
    7 | Elf_Half __weak elf_core_extra_phdrs(void)
      |                 ^~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:12:12: warning: no previous prototype for 'elf_core_write_extra_phdrs' [-Wmissing-prototypes]
   12 | int __weak elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:17:12: warning: no previous prototype for 'elf_core_write_extra_data' [-Wmissing-prototypes]
   17 | int __weak elf_core_write_extra_data(struct coredump_params *cprm)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:22:15: warning: no previous prototype for 'elf_core_extra_data_size' [-Wmissing-prototypes]
   22 | size_t __weak elf_core_extra_data_size(void)
      |               ^~~~~~~~~~~~~~~~~~~~~~~~

Provide the include file so gcc is happy, and we don't have potential code drift

Link: http://lkml.kernel.org/r/29875.1565224705@turing-police
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf build: Add detection of java-11-openjdk-devel package

[ Upstream commit 815c1560bf8fd522b8d93a1d727868b910c1cc24 ]

With Java 11 there is no seperate JRE anymore.

Details:

  https://coderanch.com/t/701603/java/JRE-JDK

Therefore the detection of the JRE needs to be adapted.

This change works for s390 and x86.  I have not tested other platforms.

Committer testing:

Continues to work with the OpenJDK 8:

  $ rm -f ~acme/lib64/libperf-jvmti.so
  $ rpm -qa | grep jdk-devel
  java-1.8.0-openjdk-devel-1.8.0.222.b10-0.fc30.x86_64
  $ git log --oneline -1
  a51937170f33 (HEAD -> perf/core) perf build: Add detection of java-11-openjdk-devel package
  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; make -C tools/perf O=/tmp/build/perf install > /dev/null 2>1
  $ ls -la ~acme/lib64/libperf-jvmti.so
  -rwxr-xr-x. 1 acme acme 230744 Sep 24 16:46 /home/acme/lib64/libperf-jvmti.so
  $

Suggested-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190909114116.50469-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()

[ Upstream commit 714e501e16cd473538b609b3e351b2cc9f7f09ed ]

An oops can be triggered in the scheduler when running qemu on arm64:

 Unable to handle kernel paging request at virtual address ffff000008effe40
 Internal error: Oops: 96000007 [#1] SMP
 Process migration/0 (pid: 12, stack limit = 0x00000000084e3736)
 pstate: 20000085 (nzCv daIf -PAN -UAO)
 pc : __ll_sc___cmpxchg_case_acq_4+0x4/0x20
 lr : move_queued_task.isra.21+0x124/0x298
 ...
 Call trace:
  __ll_sc___cmpxchg_case_acq_4+0x4/0x20
  __migrate_task+0xc8/0xe0
  migration_cpu_stop+0x170/0x180
  cpu_stopper_thread+0xec/0x178
  smpboot_thread_fn+0x1ac/0x1e8
  kthread+0x134/0x138
  ret_from_fork+0x10/0x18

__set_cpus_allowed_ptr() will choose an active dest_cpu in affinity mask to
migrage the process if process is not currently running on any one of the
CPUs specified in affinity mask. __set_cpus_allowed_ptr() will choose an
invalid dest_cpu (dest_cpu >= nr_cpu_ids, 1024 in my virtual machine) if
CPUS in an affinity mask are deactived by cpu_down after cpumask_intersects
check. cpumask_test_cpu() of dest_cpu afterwards is overflown and may pass if
corresponding bit is coincidentally set. As a consequence, kernel will
access an invalid rq address associate with the invalid CPU in
migration_cpu_stop->__migrate_task->move_queued_task and the Oops occurs.

The reproduce the crash:

  1) A process repeatedly binds itself to cpu0 and cpu1 in turn by calling
  sched_setaffinity.

  2) A shell script repeatedly does "echo 0 > /sys/devices/system/cpu/cpu1/online"
  and "echo 1 > /sys/devices/system/cpu/cpu1/online" in turn.

  3) Oops appears if the invalid CPU is set in memory after tested cpumask.

Signed-off-by: KeMeng Shi <shikemeng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1568616808-16808-1-git-send-email-shikemeng@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/membarrier: Fix private expedited registration check

[ Upstream commit fc0d77387cb5ae883fd774fc559e056a8dde024c ]

Fix a logic flaw in the way membarrier_register_private_expedited()
handles ready state checks for private expedited sync core and private
expedited registrations.

If a private expedited membarrier registration is first performed, and
then a private expedited sync_core registration is performed, the ready
state check will skip the second registration when it really should not.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-2-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/membarrier: Call sync_core only before usermode for same mm

[ Upstream commit 2840cf02fae627860156737e83326df354ee4ec6 ]

When the prev and next task's mm change, switch_mm() provides the core
serializing guarantees before returning to usermode. The only case
where an explicit core serialization is needed is when the scheduler
keeps the same mm for prev and next.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-4-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libnvdimm/nfit_test: Fix acpi_handle redefinition

[ Upstream commit 59f08896f058a92f03a0041b397a1a227c5e8529 ]

After commit 62974fc389b3 ("libnvdimm: Enable unit test infrastructure
compile checks"), clang warns:

In file included from
../drivers/nvdimm/../../tools/testing/nvdimm/test/iomap.c:15:
../drivers/nvdimm/../../tools/testing/nvdimm/test/nfit_test.h:206:15:
warning: redefinition of typedef 'acpi_handle' is a C11 feature
[-Wtypedef-redefinition]
typedef void *acpi_handle;
              ^
../include/acpi/actypes.h:424:15: note: previous definition is here
typedef void *acpi_handle;      /* Actually a ptr to a NS Node */
              ^
1 warning generated.

The include chain:

iomap.c ->
    linux/acpi.h ->
        acpi/acpi.h ->
            acpi/actypes.h
    nfit_test.h

Avoid this by including linux/acpi.h in nfit_test.h, which allows us to
remove both the typedef and the forward declaration of acpi_object.

Link: https://github.com/ClangBuiltLinux/linux/issues/660
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20190918042148.77553-1-natechancellor@gmail.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fuse: fix memleak in cuse_channel_open

[ Upstream commit 9ad09b1976c562061636ff1e01bfc3a57aebe56b ]

If cuse_send_init fails, need to fuse_conn_put cc->fc.

cuse_channel_open->fuse_conn_init->refcount_set(&fc->count, 1)
                 ->fuse_dev_alloc->fuse_conn_get
                 ->fuse_dev_free->fuse_conn_put

Fixes: cc080e9e9be1 ("fuse: introduce per-instance fuse_dev structure")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libnvdimm/region: Initialize bad block for volatile namespaces

[ Upstream commit c42adf87e4e7ed77f6ffe288dc90f980d07d68df ]

We do check for a bad block during namespace init and that use
region bad block list. We need to initialize the bad block
for volatile regions for this to work. We also observe a lockdep
warning as below because the lock is not initialized correctly
since we skip bad block init for volatile regions.

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc1-15699-g3dee241c937e #149
 Call Trace:
 [c0000000f95cb250] [c00000000147dd84] dump_stack+0xe8/0x164 (unreliable)
 [c0000000f95cb2a0] [c00000000022ccd8] register_lock_class+0x308/0xa60
 [c0000000f95cb3a0] [c000000000229cc0] __lock_acquire+0x170/0x1ff0
 [c0000000f95cb4c0] [c00000000022c740] lock_acquire+0x220/0x270
 [c0000000f95cb580] [c000000000a93230] badblocks_check+0xc0/0x290
 [c0000000f95cb5f0] [c000000000d97540] nd_pfn_validate+0x5c0/0x7f0
 [c0000000f95cb6d0] [c000000000d98300] nd_dax_probe+0xd0/0x1f0
 [c0000000f95cb760] [c000000000d9b66c] nd_pmem_probe+0x10c/0x160
 [c0000000f95cb790] [c000000000d7f5ec] nvdimm_bus_probe+0x10c/0x240
 [c0000000f95cb820] [c000000000d0f844] really_probe+0x254/0x4e0
 [c0000000f95cb8b0] [c000000000d0fdfc] driver_probe_device+0x16c/0x1e0
 [c0000000f95cb930] [c000000000d10238] device_driver_attach+0x68/0xa0
 [c0000000f95cb970] [c000000000d1040c] __driver_attach+0x19c/0x1c0
 [c0000000f95cb9f0] [c000000000d0c4c4] bus_for_each_dev+0x94/0x130
 [c0000000f95cba50] [c000000000d0f014] driver_attach+0x34/0x50
 [c0000000f95cba70] [c000000000d0e208] bus_add_driver+0x178/0x2f0
 [c0000000f95cbb00] [c000000000d117c8] driver_register+0x108/0x170
 [c0000000f95cbb70] [c000000000d7edb0] __nd_driver_register+0xe0/0x100
 [c0000000f95cbbd0] [c000000001a6baa4] nd_pmem_driver_init+0x34/0x48
 [c0000000f95cbbf0] [c0000000000106f4] do_one_initcall+0x1d4/0x4b0
 [c0000000f95cbcd0] [c0000000019f499c] kernel_init_freeable+0x544/0x65c
 [c0000000f95cbdb0] [c000000000010d6c] kernel_init+0x2c/0x180
 [c0000000f95cbe20] [c00000000000b954] ret_from_kernel_thread+0x5c/0x68

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20190919083355.26340-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal_hwmon: Sanitize thermal_zone type

[ Upstream commit 8c7aa184281c01fc26f319059efb94725012921d ]

When calling thermal_add_hwmon_sysfs(), the device type is sanitized by
replacing '-' with '_'. However tz->type remains unsanitized. Thus
calling thermal_hwmon_lookup_by_type() returns no device. And if there is
no device, thermal_remove_hwmon_sysfs() fails with "hwmon device lookup
failed!".

The result is unregisted hwmon devices in the sysfs.

Fixes: 409ef0bacacf ("thermal_hwmon: Sanitize attribute name passed to hwmon")

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: Fix use-after-free when unregistering thermal zone device

[ Upstream commit 1851799e1d2978f68eea5d9dff322e121dcf59c1 ]

thermal_zone_device_unregister() cancels the delayed work that polls the
thermal zone, but it does not wait for it to finish. This is racy with
respect to the freeing of the thermal zone device, which can result in a
use-after-free [1].

Fix this by waiting for the delayed work to finish before freeing the
thermal zone device. Note that thermal_zone_device_set_polling() is
never invoked from an atomic context, so it is safe to call
cancel_delayed_work_sync() that can block.

[1]
[  +0.002221] ==================================================================
[  +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0
[  +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17

[  +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701
[  +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[  +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check
[  +0.000012] Call Trace:
[  +0.000021]  dump_stack+0xa9/0x10e
[  +0.000020]  print_address_description.cold.2+0x9/0x25e
[  +0.000018]  __kasan_report.cold.3+0x78/0x9d
[  +0.000016]  kasan_report+0xe/0x20
[  +0.000016]  __mutex_lock+0x1076/0x11c0
[  +0.000014]  step_wise_throttle+0x72/0x150
[  +0.000018]  handle_thermal_trip+0x167/0x760
[  +0.000019]  thermal_zone_device_update+0x19e/0x5f0
[  +0.000019]  process_one_work+0x969/0x16f0
[  +0.000017]  worker_thread+0x91/0xc40
[  +0.000014]  kthread+0x33d/0x400
[  +0.000015]  ret_from_fork+0x3a/0x50

[  +0.000020] Allocated by task 1:
[  +0.000015]  save_stack+0x19/0x80
[  +0.000015]  __kasan_kmalloc.constprop.4+0xc1/0xd0
[  +0.000014]  kmem_cache_alloc_trace+0x152/0x320
[  +0.000015]  thermal_zone_device_register+0x1b4/0x13a0
[  +0.000015]  mlxsw_thermal_init+0xc92/0x23d0
[  +0.000014]  __mlxsw_core_bus_device_register+0x659/0x11b0
[  +0.000013]  mlxsw_core_bus_device_register+0x3d/0x90
[  +0.000013]  mlxsw_pci_probe+0x355/0x4b0
[  +0.000014]  local_pci_probe+0xc3/0x150
[  +0.000013]  pci_device_probe+0x280/0x410
[  +0.000013]  really_probe+0x26a/0xbb0
[  +0.000013]  driver_probe_device+0x208/0x2e0
[  +0.000013]  device_driver_attach+0xfe/0x140
[  +0.000013]  __driver_attach+0x110/0x310
[  +0.000013]  bus_for_each_dev+0x14b/0x1d0
[  +0.000013]  driver_register+0x1c0/0x400
[  +0.000015]  mlxsw_sp_module_init+0x5d/0xd3
[  +0.000014]  do_one_initcall+0x239/0x4dd
[  +0.000013]  kernel_init_freeable+0x42b/0x4e8
[  +0.000012]  kernel_init+0x11/0x18b
[  +0.000013]  ret_from_fork+0x3a/0x50

[  +0.000015] Freed by task 581:
[  +0.000013]  save_stack+0x19/0x80
[  +0.000014]  __kasan_slab_free+0x125/0x170
[  +0.000013]  kfree+0xf3/0x310
[  +0.000013]  thermal_release+0xc7/0xf0
[  +0.000014]  device_release+0x77/0x200
[  +0.000014]  kobject_put+0x1a8/0x4c0
[  +0.000014]  device_unregister+0x38/0xc0
[  +0.000014]  thermal_zone_device_unregister+0x54e/0x6a0
[  +0.000014]  mlxsw_thermal_fini+0x184/0x35a
[  +0.000014]  mlxsw_core_bus_device_unregister+0x10a/0x640
[  +0.000013]  mlxsw_devlink_core_bus_device_reload+0x92/0x210
[  +0.000015]  devlink_nl_cmd_reload+0x113/0x1f0
[  +0.000014]  genl_family_rcv_msg+0x700/0xee0
[  +0.000013]  genl_rcv_msg+0xca/0x170
[  +0.000013]  netlink_rcv_skb+0x137/0x3a0
[  +0.000012]  genl_rcv+0x29/0x40
[  +0.000013]  netlink_unicast+0x49b/0x660
[  +0.000013]  netlink_sendmsg+0x755/0xc90
[  +0.000013]  __sys_sendto+0x3de/0x430
[  +0.000013]  __x64_sys_sendto+0xe2/0x1b0
[  +0.000013]  do_syscall_64+0xa4/0x4d0
[  +0.000013]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[  +0.000017] The buggy address belongs to the object at ffff8881e48e0008
               which belongs to the cache kmalloc-2k of size 2048
[  +0.000012] The buggy address is located 1096 bytes inside of
               2048-byte region [ffff8881e48e0008, ffff8881e48e0808)
[  +0.000007] The buggy address belongs to the page:
[  +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0
[  +0.000020] flags: 0x200000000010200(slab|head)
[  +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0
[  +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[  +0.000007] page dumped because: kasan: bad access detected

[  +0.000012] Memory state around the buggy address:
[  +0.000012]  ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000012]  ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000008]                                                  ^
[  +0.000012]  ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000012]  ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007] ==================================================================

Fixes: b1569e99c795 ("ACPI: move thermal trip handling to generic thermal layer")
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntb: point to right memory window index

[ Upstream commit ae89339b08f3fe02457ec9edd512ddc3d246d0f8 ]

second parameter of ntb_peer_mw_get_addr is pointing to wrong memory
window index by passing "peer gidx" instead of "local gidx".

For ex, "local gidx" value is '0' and "peer gidx" value is '1', then

on peer side ntb_mw_set_trans() api is used as below with gidx pointing to
local side gidx which is '0', so memroy window '0' is chosen and XLAT '0'
will be programmed by peer side.

    ntb_mw_set_trans(perf->ntb, peer->pidx, peer->gidx, peer->inbuf_xlat,
                    peer->inbuf_size);

Now, on local side ntb_peer_mw_get_addr() is been used as below with gidx
pointing to "peer gidx" which is '1', so pointing to memory window '1'
instead of memory window '0'.

    ntb_peer_mw_get_addr(perf->ntb,  peer->gidx, &phys_addr,
                        &peer->outbuf_size);

So this patch pass "local gidx" as parameter to ntb_peer_mw_get_addr().

Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/purgatory: Disable the stackleak GCC plugin for the purgatory

[ Upstream commit ca14c996afe7228ff9b480cf225211cc17212688 ]

Since commit:

  b059f801a937 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS")

kexec breaks if GCC_PLUGIN_STACKLEAK=y is enabled, as the purgatory
contains undefined references to stackleak_track_stack.

Attempting to load a kexec kernel results in this failure:

  kexec: Undefined symbol: stackleak_track_stack
  kexec-bzImage64: Loading purgatory failed

Fix this by disabling the stackleak plugin for the purgatory.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b059f801a937 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS")
Link: https://lkml.kernel.org/r/20190923171753.GA2252517@rani.riverdale.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: stm32-lp: Add check in case requested period cannot be achieved

[ Upstream commit c91e3234c6035baf5a79763cb4fcd5d23ce75c2b ]

LPTimer can use a 32KHz clock for counting. It depends on clock tree
configuration. In such a case, PWM output frequency range is limited.
Although unlikely, nothing prevents user from requesting a PWM frequency
above counting clock (32KHz for instance):
- This causes (prd - 1) = 0xffff to be written in ARR register later in
the apply() routine.
This results in badly configured PWM period (and also duty_cycle).
Add a check to report an error is such a case.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors

[ Upstream commit 9c47b18cf722184f32148784189fca945a7d0561 ]

IF the server rejected our layout return with a state error such as
NFS4ERR_BAD_STATEID, or even a stale inode error, then we do want
to clear out all the remaining layout segments and mark that stateid
as invalid.

Fixes: 1c5bd76d17cca ("pNFS: Enable layoutreturn operation for...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Check for valid number of registers to read

[ Upstream commit 73d8e6c7b841d9bf298c8928f228fb433676635c ]

Do not try to allocate any amount of memory requested by the user.
Instead limit it to 128 registers. Actually the longest series of
consecutive allowed registers are 48, mmGB_TILE_MODE0-31 and
mmGB_MACROTILE_MODE0-15 (0x2644-0x2673).

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111273
Signed-off-by: Trek <trek00@inbox.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix KFD-related kernel oops on Hawaii

[ Upstream commit dcafbd50f2e4d5cc964aae409fb5691b743fba23 ]

Hawaii needs to flush caches explicitly, submitting an IB in a user
VMID from kernel mode. There is no s_fence in this case.

Fixes: eb3961a57424 ("drm/amdgpu: remove fence context from the job")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: allow lookups in dynamic sets

[ Upstream commit acab713177377d9e0889c46bac7ff0cfb9a90c4d ]

This un-breaks lookups in sets that have the 'dynamic' flag set.
Given this active example configuration:

table filter {
  set set1 {
    type ipv4_addr
    size 64
    flags dynamic,timeout
    timeout 1m
  }

  chain input {
     type filter hook input priority 0; policy accept;
  }
}

... this works:
nft add rule ip filter input add @set1 { ip saddr }

-> whenever rule is triggered, the source ip address is inserted
into the set (if it did not exist).

This won't work:
nft add rule ip filter input ip saddr @set1 counter
Error: Could not process rule: Operation not supported

In other words, we can add entries to the set, but then can't make
matching decision based on that set.

That is just wrong -- all set backends support lookups (else they would
not be very useful).
The failure comes from an explicit rejection in nft_lookup.c.

Looking at the history, it seems like NFT_SET_EVAL used to mean
'set contains expressions' (aka. "is a meter"), for instance something like

 nft add rule ip filter input meter example { ip saddr limit rate 10/second }
 or
 nft add rule ip filter input meter example { ip saddr counter }

The actual meaning of NFT_SET_EVAL however, is
'set can be updated from the packet path'.

'meters' and packet-path insertions into sets, such as
'add @set { ip saddr }' use exactly the same kernel code (nft_dynset.c)
and thus require a set backend that provides the ->update() function.

The only set that provides this also is the only one that has the
NFT_SET_EVAL feature flag.

Removing the wrong check makes the above example work.
While at it, also fix the flag check during set instantiation to
allow supported combinations only.

Fixes: 8aeff920dcc9b3f ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: aspeed: Add support for AST2600

[ Upstream commit b3528b4874480818e38e4da019d655413c233e6a ]

The ast2600 can be supported by the same code as the ast2500.

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190819051738.17370-3-joel@jms.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: reconnect connection if session hang in opening state

[ Upstream commit 71a228bc8d65900179e37ac309e678f8c523f133 ]

If client mds session is evicted in CEPH_MDS_SESSION_OPENING state,
mds won't send session msg to client, and delayed_work skip
CEPH_MDS_SESSION_OPENING state session, the session hang forever.

Allow ceph_con_keepalive to reconnect a session in OPENING to avoid
session hang. Also, ensure that we skip sessions in RESTARTING and
REJECTED states since those states can't be resurrected by issuing
a keepalive.

Link: https://tracker.ceph.com/issues/41551
Signed-off-by: Erqi Chen chenerqi@gmail.com
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix directories inode i_blkbits initialization

[ Upstream commit 750670341a24cb714e624e0fd7da30900ad93752 ]

When filling an inode with info from the MDS, i_blkbits is being
initialized using fl_stripe_unit, which contains the stripe unit in
bytes.  Unfortunately, this doesn't make sense for directories as they
have fl_stripe_unit set to '0'.  This means that i_blkbits will be set
to 0xff, causing an UBSAN undefined behaviour in i_blocksize():

  UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12
  shift exponent 255 is too large for 32-bit type 'int'

Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit
is zero.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/pci: reserve MCFG areas earlier

[ Upstream commit a4098bc6eed5e31e0391bcc068e61804c98138df ]

If MCFG area is not reserved in E820, Xen by default will defer its usage
until Dom0 registers it explicitly after ACPI parser recognizes it as
a reserved resource in DSDT. Having it reserved in E820 is not
mandatory according to "PCI Firmware Specification, rev 3.2" (par. 4.1.2)
and firmware is free to keep a hole in E820 in that place. Xen doesn't know
what exactly is inside this hole since it lacks full ACPI view of the
platform therefore it's potentially harmful to access MCFG region
without additional checks as some machines are known to provide
inconsistent information on the size of the region.

Now xen_mcfg_late() runs after acpi_init() which is too late as some basic
PCI enumeration starts exactly there as well. Trying to register a device
prior to MCFG reservation causes multiple problems with PCIe extended
capability initializations in Xen (e.g. SR-IOV VF BAR sizing). There are
no convenient hooks for us to subscribe to so register MCFG areas earlier
upon the first invocation of xen_add_device(). It should be safe to do once
since all the boot time buses must have their MCFG areas in MCFG table
already and we don't support PCI bus hot-plug.

Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p: avoid attaching writeback_fid on mmap with type PRIVATE

[ Upstream commit c87a37ebd40b889178664c2c09cc187334146292 ]

Currently on mmap cache policy, we always attach writeback_fid
whether mmap type is SHARED or PRIVATE. However, in the use case
of kata-container which combines 9p(Guest OS) with overlayfs(Host OS),
this behavior will trigger overlayfs' copy-up when excute command
inside container.

Link: http://lkml.kernel.org/r/20190820100325.10313-1-cgxu519@zoho.com.cn
Signed-off-by: Chengguang Xu <cgxu519@zoho.com.cn>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p: Transport error uninitialized

[ Upstream commit 0ce772fe79b68f83df40f07f28207b292785c677 ]

The p9_tag_alloc() does not initialize the transport error t_err field.
The struct p9_req_t *req is allocated and stored in a struct p9_client
variable. The field t_err is never initialized before p9_conn_cancel()
checks its value.

KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool)
reports this bug.

==================================================================
BUG: KUMSAN: use of uninitialized memory in p9_conn_cancel+0x2d9/0x3b0
Read of size 4 at addr ffff88805f9b600c by task kworker/1:2/1216

CPU: 1 PID: 1216 Comm: kworker/1:2 Not tainted 5.2.0-rc4+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Workqueue: events p9_write_work
Call Trace:
 dump_stack+0x75/0xae
 __kumsan_report+0x17c/0x3e6
 kumsan_report+0xe/0x20
 p9_conn_cancel+0x2d9/0x3b0
 p9_write_work+0x183/0x4a0
 process_one_work+0x4d1/0x8c0
 worker_thread+0x6e/0x780
 kthread+0x1ca/0x1f0
 ret_from_fork+0x35/0x40

Allocated by task 1979:
 save_stack+0x19/0x80
 __kumsan_kmalloc.constprop.3+0xbc/0x120
 kmem_cache_alloc+0xa7/0x170
 p9_client_prepare_req.part.9+0x3b/0x380
 p9_client_rpc+0x15e/0x880
 p9_client_create+0x3d0/0xac0
 v9fs_session_init+0x192/0xc80
 v9fs_mount+0x67/0x470
 legacy_get_tree+0x70/0xd0
 vfs_get_tree+0x4a/0x1c0
 do_mount+0xba9/0xf90
 ksys_mount+0xa8/0x120
 __x64_sys_mount+0x62/0x70
 do_syscall_64+0x6d/0x1e0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 0:
(stack is not available)

The buggy address belongs to the object at ffff88805f9b6008
 which belongs to the cache p9_req_t of size 144
The buggy address is located 4 bytes inside of
 144-byte region [ffff88805f9b6008, ffff88805f9b6098)
The buggy address belongs to the page:
page:ffffea00017e6d80 refcount:1 mapcount:0 mapping:ffff888068b63740 index:0xffff88805f9b7d90 compound_mapcount: 0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 ffff888068b66450 ffff888068b66450 ffff888068b63740
raw: ffff88805f9b7d90 0000000000100001 00000001ffffffff 0000000000000000
page dumped because: kumsan: bad access detected
==================================================================

Link: http://lkml.kernel.org/r/20190613070854.10434-1-shuaibinglu@126.com
Signed-off-by: Lu Shuaibing <shuaibinglu@126.com>
[dominique.martinet@cea.fr: grouped the added init with the others]
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: nfs: Fix possible null-pointer dereferences in encode_attrs()

[ Upstream commit e2751463eaa6f9fec8fea80abbdc62dbc487b3c5 ]

In encode_attrs(), there is an if statement on line 1145 to check
whether label is NULL:
    if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL))

When label is NULL, it is used on lines 1178-1181:
    *p++ = cpu_to_be32(label->lfs);
    *p++ = cpu_to_be32(label->pi);
    *p++ = cpu_to_be32(label->len);
    p = xdr_encode_opaque_fixed(p, label->label, label->len);

To fix these bugs, label is checked before being used.

These bugs are found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: fix freeing ongoing ahash_request

[ Upstream commit 4ece3125f21b1d42b84896c5646dbf0e878464e1 ]

integrity_kernel_read() can fail in which case we forward to call
ahash_request_free() on a currently running request. We have to wait
for its completion before we can free the request.

This was observed by interrupting a "find / -type f -xdev -print0 | xargs -0
cat 1>/dev/null" with ctrl-c on an IMA enabled filesystem.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: always return negative code for error

[ Upstream commit f5e1040196dbfe14c77ce3dfe3b7b08d2d961e88 ]

integrity_kernel_read() returns the number of bytes read. If this is
a short read then this positive value is returned from
ima_calc_file_hash_atfm(). Currently this is only indirectly called from
ima_calc_file_hash() and this function only tests for the return value
being zero or nonzero and also doesn't forward the return value.
Nevertheless there's no point in returning a positive value as an error,
so translate a short read into -EINVAL.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: cpufeature: Detect SSBS and advertise to userspace

commit d71be2b6c0e19180b5f80a6d42039cc074a693a2 upstream.

Armv8.5 introduces a new PSTATE bit known as Speculative Store Bypass
Safe (SSBS) which can be used as a mitigation against Spectre variant 4.

Additionally, a CPU may provide instructions to manipulate PSTATE.SSBS
directly, so that userspace can toggle the SSBS control without trapping
to the kernel.

This patch probes for the existence of SSBS and advertise the new instructions
to userspace if they exist.

Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: initialize on-stack chandefs

commit f43e5210c739fe76a4b0ed851559d6902f20ceb1 upstream.

In a few places we don't properly initialize on-stack chandefs,
resulting in EDMG data to be non-zero, which broke things.

Additionally, in a few places we rely on the driver to init the
data completely, but perhaps we shouldn't as non-EDMG drivers
may not initialize the EDMG data, also initialize it there.

Cc: stable@vger.kernel.org
Fixes: 2a38075cd0be ("nl80211: Add support for EDMG channels")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cio: avoid calling strlen on null pointer

commit ea298e6ee8b34b3ed4366be7eb799d0650ebe555 upstream.

Fix the following kasan finding:
BUG: KASAN: global-out-of-bounds in ccwgroup_create_dev+0x850/0x1140
Read of size 1 at addr 0000000000000000 by task systemd-udevd.r/561

CPU: 30 PID: 561 Comm: systemd-udevd.r Tainted: G    B
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
([<0000000231b3db7e>] show_stack+0x14e/0x1a8)
 [<0000000233826410>] dump_stack+0x1d0/0x218
 [<000000023216fac4>] print_address_description+0x64/0x380
 [<000000023216f5a8>] __kasan_report+0x138/0x168
 [<00000002331b8378>] ccwgroup_create_dev+0x850/0x1140
 [<00000002332b618a>] group_store+0x3a/0x50
 [<00000002323ac706>] kernfs_fop_write+0x246/0x3b8
 [<00000002321d409a>] vfs_write+0x132/0x450
 [<00000002321d47da>] ksys_write+0x122/0x208
 [<0000000233877102>] system_call+0x2a6/0x2c8

Triggered by:
openat(AT_FDCWD, "/sys/bus/ccwgroup/drivers/qeth/group",
O_WRONLY|O_CREAT|O_TRUNC|O_CLOEXEC, 0666) = 16
write(16, "0.0.bd00,0.0.bd01,0.0.bd02", 26) = 26

The problem is that __get_next_id in ccwgroup_create_dev might set "buf"
buffer pointer to NULL and explicit check for that is required.

Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ieee802154: atusb: fix use-after-free at disconnect

commit 7fd25e6fc035f4b04b75bca6d7e8daa069603a76 upstream.

The disconnect callback was accessing the hardware-descriptor private
data after having having freed it.

Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
Cc: stable <stable@vger.kernel.org> # 4.2
Cc: Alexander Aring <alex.aring@gmail.com>
Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/xenbus: fix self-deadlock after killing user process

commit a8fabb38525c51a094607768bac3ba46b3f4a9d5 upstream.

In case a user process using xenbus has open transactions and is killed
e.g. via ctrl-C the following cleanup of the allocated resources might
result in a deadlock due to trying to end a transaction in the xenbus
worker thread:

[ 2551.474706] INFO: task xenbus:37 blocked for more than 120 seconds.
[ 2551.492215]       Tainted: P           OE     5.0.0-29-generic #5
[ 2551.510263] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2551.528585] xenbus          D    0    37      2 0x80000080
[ 2551.528590] Call Trace:
[ 2551.528603]  __schedule+0x2c0/0x870
[ 2551.528606]  ? _cond_resched+0x19/0x40
[ 2551.528632]  schedule+0x2c/0x70
[ 2551.528637]  xs_talkv+0x1ec/0x2b0
[ 2551.528642]  ? wait_woken+0x80/0x80
[ 2551.528645]  xs_single+0x53/0x80
[ 2551.528648]  xenbus_transaction_end+0x3b/0x70
[ 2551.528651]  xenbus_file_free+0x5a/0x160
[ 2551.528654]  xenbus_dev_queue_reply+0xc4/0x220
[ 2551.528657]  xenbus_thread+0x7de/0x880
[ 2551.528660]  ? wait_woken+0x80/0x80
[ 2551.528665]  kthread+0x121/0x140
[ 2551.528667]  ? xb_read+0x1d0/0x1d0
[ 2551.528670]  ? kthread_park+0x90/0x90
[ 2551.528673]  ret_from_fork+0x35/0x40

Fix this by doing the cleanup via a workqueue instead.

Reported-by: James Dingwall <james@dingwall.me.uk>
Fixes: fd8aa9095a95c ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Cc: <stable@vger.kernel.org> # 4.11
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "locking/pvqspinlock: Don't wait if vCPU is preempted"

commit 89340d0935c9296c7b8222b6eab30e67cb57ab82 upstream.

This patch reverts commit 75437bb304b20 (locking/pvqspinlock: Don't
wait if vCPU is preempted).  A large performance regression was caused
by this commit.  on over-subscription scenarios.

The test was run on a Xeon Skylake box, 2 sockets, 40 cores, 80 threads,
with three VMs of 80 vCPUs each.  The score of ebizzy -M is reduced from
13000-14000 records/s to 1700-1800 records/s:

          Host                Guest                score

vanilla w/o kvm optimizations     upstream    1700-1800 records/s
vanilla w/o kvm optimizations     revert      13000-14000 records/s
vanilla w/ kvm optimizations      upstream    4500-5000 records/s
vanilla w/ kvm optimizations      revert      14000-15500 records/s

Exit from aggressive wait-early mechanism can result in premature yield
and extra scheduling latency.

Actually, only 6% of wait_early events are caused by vcpu_is_preempted()
being true.  However, when one vCPU voluntarily releases its vCPU, all
the subsequently waiters in the queue will do the same and the cascading
effect leads to bad performance.

kvm optimizations:
[1] commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts)
[2] commit 266e85a5ec9 (KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption)

Tested-by: loobinliu@tencent.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: loobinliu@tencent.com
Cc: stable@vger.kernel.org
Fixes: 75437bb304b20 (locking/pvqspinlock: Don't wait if vCPU is preempted)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence

commit 121bd08b029e03404c451bb237729cdff76eafed upstream.

We must not unconditionally set the DMA snoop bit; if the DMA API is
assuming that the device is not DMA coherent, and the device snoops the
CPU caches, the device can see stale cache lines brought in by
speculative prefetch.

This leads to the device seeing stale data, potentially resulting in
corrupted data transfers.  Commonly, this results in a descriptor fetch
error such as:

mmc0: ADMA error
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00002202
mmc0: sdhci: Blk size:  0x00000008 | Blk cnt:  0x00000001
mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000013
mmc0: sdhci: Present:   0x01f50008 | Host ctl: 0x00000038
mmc0: sdhci: Power:     0x00000003 | Blk gap:  0x00000000
mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x000040d8
mmc0: sdhci: Timeout:   0x00000003 | Int stat: 0x00000001
mmc0: sdhci: Int enab:  0x037f108f | Sig enab: 0x037f108b
mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202
mmc0: sdhci: Caps:      0x35fa0000 | Caps_1:   0x0000af00
mmc0: sdhci: Cmd:       0x0000333a | Max curr: 0x00000000
mmc0: sdhci: Resp[0]:   0x00000920 | Resp[1]:  0x001d8a33
mmc0: sdhci: Resp[2]:   0x325b5900 | Resp[3]:  0x3f400e00
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err:  0x00000009 | ADMA Ptr: 0x000000236d43820c
mmc0: sdhci: ============================================
mmc0: error -5 whilst initialising SD card

but can lead to other errors, and potentially direct the SDHCI
controller to read/write data to other memory locations (e.g. if a valid
descriptor is visible to the device in a stale cache line.)

Fix this by ensuring that the DMA snoop bit corresponds with the
behaviour of the DMA API.  Since the driver currently only supports DT,
use of_dma_is_coherent().  Note that device_get_dma_attr() can not be
used as that risks re-introducing this bug if/when the driver is
converted to ACPI.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: improve ADMA error reporting

commit d1c536e3177390da43d99f20143b810c35433d1f upstream.

ADMA errors are potentially data corrupting events; although we print
the register state, we do not usefully print the ADMA descriptors.
Worse than that, we print them by referencing their virtual address
which is meaningless when the register state gives us the DMA address
of the failing descriptor.

Print the ADMA descriptors giving their DMA addresses rather than their
virtual addresses, and print them using SDHCI_DUMP() rather than DBG().

We also do not show the correct value of the interrupt status register;
the register dump shows the current value, after we have cleared the
pending interrupts we are going to service.  What is more useful is to
print the interrupts that _were_ pending at the time the ADMA error was
encountered.  Fix that too.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gvt: update vgpu workload head pointer correctly

commit 0a3242bdb47713e09cb004a0ba4947d3edf82d8a upstream.

when creating a vGPU workload, the guest context head pointer should
be updated correctly by comparing with the exsiting workload in the
guest worklod queue including the current running context.

in some situation, there is a running context A and then received 2 new
vGPU workload context B and A. in the new workload context A, it's head
pointer should be updated with the running context A's tail.

v2: walk through guest workload list in backward way.

Cc: stable@vger.kernel.org
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors

commit 698c1aa9f83b618de79e9e5e19a58f70a4a6ae0f upstream.

On the ThinkPad P71, we have one eDP connector exposed along with 5 DP
connectors, resulting in a total of 11 TMDS encoders. Since the GPU on
this system is also capable of MST, we create an additional 4 fake MST
encoders for each DP port. Unfortunately, we also do this for the eDP
port as well, resulting in:

  1 eDP port: +1 TMDS encoder
              +4 DPMST encoders
  5 DP ports: +2 TMDS encoders
              +4 DPMST encoders
      *5 ports
      == 35 encoders

Which breaks things, since DRM has a hard coded limit of 32 encoders.
So, fix this by not creating MSTMs for any eDP connectors. This brings
us down to 31 encoders, although we can do better.

This fixes driver probing for nouveau on the ThinkPad P71.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>