platform/kernel/linux-starfive.git
6 years agoscsi: aacraid: Move code to wait for IO completion to shutdown func
Raghava Aditya Renukunta [Wed, 27 Dec 2017 04:34:29 +0000 (20:34 -0800)]
scsi: aacraid: Move code to wait for IO completion to shutdown func

Ideally driver needs to wait for IO to be submitted or responded to before
shutdown.

Move code to wait for IO completion into shutdown path

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: aacraid: Refactor reset_host store function
Raghava Aditya Renukunta [Wed, 27 Dec 2017 04:34:28 +0000 (20:34 -0800)]
scsi: aacraid: Refactor reset_host store function

Refactored the reset_host store function to make consistent across code
bases

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: aacraid: Allow reset_host sysfs var to recover Panicked Fw
Raghava Aditya Renukunta [Wed, 27 Dec 2017 04:34:27 +0000 (20:34 -0800)]
scsi: aacraid: Allow reset_host sysfs var to recover Panicked Fw

It is possible to restart the controller via the use of the reset_host
sysfs variable. This does work for controllers that can no longer respond,
since driver will attempt to send down a shutdown in this path.

Check if the controller is able to receive commands before sending down
a shutdown

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: aacraid: Fix ioctl reset hang
Raghava Aditya Renukunta [Wed, 27 Dec 2017 04:34:26 +0000 (20:34 -0800)]
scsi: aacraid: Fix ioctl reset hang

Driver would hang when attempting to send reset from the ioctl interface,
since it would wait to retrieve the ioctl mutex at send shutdown.

Set adapter shutdown and unlock mutex before sending down reset request.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: aacraid: Do not remove offlined devices
Raghava Aditya Renukunta [Wed, 27 Dec 2017 04:34:25 +0000 (20:34 -0800)]
scsi: aacraid: Do not remove offlined devices

As part of the recovery process, the drivers removes offline devices (
done by the kernel) and then tries to add them back in the rescan code.
Removing the device is like taking a sledgehammer to a nail.

Set the device as running if it is marked offline.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: aacraid: Fix hang in kdump
Raghava Aditya Renukunta [Wed, 27 Dec 2017 04:34:24 +0000 (20:34 -0800)]
scsi: aacraid: Fix hang in kdump

Driver attempts to perform a device scan and device add after coming out
of reset. At times when the kdump kernel loads and it tries to perform
eh recovery, the device scan hangs since its commands are blocked because
of the eh recovery. This should have shown up in normal eh recovery path
(Should have been obvious)

Remove the code that performs scanning.I can live without the rescanning
support in the stable kernels but a hanging kdump/eh recovery needs to be
fixed.

Fixes: a2d0321dd532901e (scsi: aacraid: Reload offlined drives after controller reset)
Cc: <stable@vger.kernel.org>
Reported-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Fixes: a2d0321dd532901e (scsi: aacraid: Reload offlined drives after controller reset)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: aacraid: Do not attempt abort when Fw panicked
Raghava Aditya Renukunta [Wed, 27 Dec 2017 04:34:23 +0000 (20:34 -0800)]
scsi: aacraid: Do not attempt abort when Fw panicked

Check if the adapter can receive abort requests, before sending aborts

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: aacraid: Fix udev inquiry race condition
Raghava Aditya Renukunta [Wed, 27 Dec 2017 04:34:22 +0000 (20:34 -0800)]
scsi: aacraid: Fix udev inquiry race condition

When udev requests for a devices inquiry string, it might create multiple
threads causing a race condition on the shared inquiry resource string.

Created a buffer with the string for each thread.

Cc: <stable@vger.kernel.org>
Fixes: 3bc8070fb75b3315 ([SCSI] aacraid: SMC vendor identification)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: doc: fix iscsi-related kernel-doc warnings
Randy Dunlap [Fri, 22 Dec 2017 22:08:27 +0000 (14:08 -0800)]
scsi: doc: fix iscsi-related kernel-doc warnings

Fix kernel-doc warnings in drivers/scsi/ that are related to iscsi
support interfaces.

Fixes these kernel-doc warnings: (tested by adding these files to a new
target.rst documentation file: WIP)

../drivers/scsi/libiscsi.c:2740: warning: No description found for parameter 'dd_size'
../drivers/scsi/libiscsi.c:2740: warning: No description found for parameter 'id'
../drivers/scsi/libiscsi.c:2961: warning: No description found for parameter 'cls_conn'
../drivers/scsi/iscsi_tcp.c:313: warning: No description found for parameter 'conn'
../drivers/scsi/iscsi_tcp.c:363: warning: No description found for parameter 'conn'
../drivers/scsi/libiscsi_tcp.c:810: warning: No description found for parameter 'tcp_conn'
../drivers/scsi/libiscsi_tcp.c:810: warning: No description found for parameter 'segment'
../drivers/scsi/libiscsi_tcp.c:887: warning: No description found for parameter 'offloaded'
../drivers/scsi/libiscsi_tcp.c:887: warning: No description found for parameter 'status'
../drivers/scsi/libiscsi_tcp.c:887: warning: Excess function parameter 'offload' description in 'iscsi_tcp_recv_skb'
../drivers/scsi/libiscsi_tcp.c:964: warning: Excess function parameter 'conn' description in 'iscsi_tcp_task_init'
../drivers/scsi/libiscsi_tcp.c:964: warning: Excess function parameter 'sc' description in 'iscsi_tcp_task_init'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: linux-rdma@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag.
Chaitra P B [Thu, 28 Dec 2017 07:09:11 +0000 (23:09 -0800)]
scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag.

1. In IO path, setting of "ATA command pending" flag early before device
   removal, invalid device handle etc., checks causes any new commands
   to be always returned with SAM_STAT_BUSY and when the driver removes
   the drive the SML issues SYNC Cache command and that command is
   always returned with SAM_STAT_BUSY and thus making SYNC Cache command
   to requeued.

2. If the driver gets an ATA PT command for a SATA drive then the driver
   set "ATA command pending" flag in device specific data structure not
   to allow any further commands until the ATA PT command is completed.
   However, after setting the flag if the driver decides to return the
   command back to upper layers without actually issuing to the firmware
   (i.e., returns from qcmd failure return paths) then the corresponding
   flag is not cleared and this prevents the driver from sending any new
   commands to the drive.

This patch fixes above two issues by setting of "ATA command pending"
flag after checking for whether device deleted, invalid device handle,
device busy with task management. And by setting "ATA command pending"
flag to false in all of the qcmd failure return paths after setting the
flag.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: fix a couple of minor indentation issues
Colin Ian King [Fri, 22 Dec 2017 00:39:36 +0000 (00:39 +0000)]
scsi: lpfc: fix a couple of minor indentation issues

Several statements are indented too far, fix these

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: don't dereference localport before it has been null checked
Colin Ian King [Fri, 22 Dec 2017 00:28:52 +0000 (00:28 +0000)]
scsi: lpfc: don't dereference localport before it has been null checked

localport is being dereferenced to assign lport and then immediately
afterwards localport is being sanity checked to see if it is null.  Fix
this by only dereferencing localport until after it has been null
checked.

Detected by CoverityScan, CID#1463038 ("Dereference before null check")

Fixes: 3a8cefbfc5ee ("scsi: lpfc: Beef up stat counters for debug")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: scsi_transport_fc: fix typos on 64/128 GBit define names
James Smart [Thu, 21 Dec 2017 22:25:52 +0000 (14:25 -0800)]
scsi: scsi_transport_fc: fix typos on 64/128 GBit define names

The define names specified 64Bit/128Bit, not 64GBIT/128GBIT.  Correct
the names.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: libsas: remove private hex2bin() implementation
Andy Shevchenko [Tue, 19 Dec 2017 17:37:27 +0000 (19:37 +0200)]
scsi: libsas: remove private hex2bin() implementation

The function sas_parse_addr() could be easily substituted by hex2bin()
which is in kernel library code.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: libiscsi: Allow sd_shutdown on bad transport
Rafael David Tinoco [Thu, 7 Dec 2017 21:59:13 +0000 (19:59 -0200)]
scsi: libiscsi: Allow sd_shutdown on bad transport

If, for any reason, userland shuts down iscsi transport interfaces
before proper logouts - like when logging in to LUNs manually, without
logging out on server shutdown, or when automated scripts can't
umount/logout from logged LUNs - kernel will hang forever on its
sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all
still existent paths.

PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow"
 #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee
 #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5
 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199
 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604
 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c
 #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10
 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7
 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe
 #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7
 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c

This happens because iscsi_eh_cmd_timed_out(), the transport layer
timeout helper, would tell the queue timeout function (scsi_times_out)
to reset the request timer over and over, until the session state is
back to logged in state. Unfortunately, during server shutdown, this
might never happen again.

Other option would be "not to handle" the issue in the transport
layer. That would trigger the error handler logic, which would also need
the session state to be logged in again.

Best option, for such case, is to tell upper layers that the command was
handled during the transport layer error handler helper, marking it as
DID_NO_CONNECT, which will allow completion and inform about the
problem.

After the session was marked as ISCSI_STATE_FAILED, due to the first
timeout during the server shutdown phase, all subsequent cmds will fail
to be queued, allowing upper logic to fail faster.

Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: correct sg_seg_cnt attribute min vs default
James Smart [Tue, 19 Dec 2017 18:57:50 +0000 (10:57 -0800)]
scsi: lpfc: correct sg_seg_cnt attribute min vs default

Prior patch mixed up what argument in the macro was what, so min value
was placed as the "default" argument, and the default value was placed
as the "min" argument. Thus, when the default was applied, it looked
like the default was smaller than the allowed min.

Swap argument postions to correct.

[mkp: fixed checkpatch warning]

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que
Himanshu Madhani [Sun, 17 Dec 2017 00:05:09 +0000 (16:05 -0800)]
scsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que

This patch fixes following warnings reported by smatch:

drivers/scsi/qla2xxx/qla_mid.c:586 qla25xx_delete_req_que()
error: we previously assumed 'req' could be null (see line 580)

drivers/scsi/qla2xxx/qla_mid.c:602 qla25xx_delete_rsp_que()
error: we previously assumed 'rsp' could be null (see line 596)

Fixes: 7867b98dceb7 ("scsi: qla2xxx: Fix memory leak in dual/target mode")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qedi: Fix a possible sleep-in-atomic bug in qedi_process_tmf_resp
Jia-Ju Bai [Wed, 13 Dec 2017 09:11:08 +0000 (17:11 +0800)]
scsi: qedi: Fix a possible sleep-in-atomic bug in qedi_process_tmf_resp

The driver may sleep under a spinlock.
The function call path is:
qedi_cpu_offline (acquire the spinlock)
  qedi_fp_process_cqes
    qedi_mtask_completion
      qedi_process_tmf_resp
        kzalloc(GFP_KERNEL) --> may sleep

To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool(DSAC) and checked by my
code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: simplify arcmsr_request_device_map routine
Ching Huang [Wed, 13 Dec 2017 08:33:36 +0000 (16:33 +0800)]
scsi: arcmsr: simplify arcmsr_request_device_map routine

Simplify arcmsr_request_device_map routine.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: simplify all arcmsr_hbaX_get_config routine by call a new get_adapter_c...
Ching Huang [Tue, 12 Dec 2017 10:53:33 +0000 (18:53 +0800)]
scsi: arcmsr: simplify all arcmsr_hbaX_get_config routine by call a new get_adapter_config function

Simplify all arcmsr_hbaX_get_config routine by call a new
get_adapter_config function.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: simplify arcmsr_hbaE_get_config function
Ching Huang [Tue, 12 Dec 2017 10:50:51 +0000 (18:50 +0800)]
scsi: arcmsr: simplify arcmsr_hbaE_get_config function

Simplify arcmsr_hbaE_get_config function.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: waiting for iop firmware ready before issue get_config command to iop
Ching Huang [Tue, 12 Dec 2017 10:48:24 +0000 (18:48 +0800)]
scsi: arcmsr: waiting for iop firmware ready before issue get_config command to iop

Waiting for iop firmware ready before issue get_config command to iop
for adapter type A and D.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: simplify arcmsr_hbaC_get_config function
Ching Huang [Tue, 12 Dec 2017 10:42:29 +0000 (18:42 +0800)]
scsi: arcmsr: simplify arcmsr_hbaC_get_config function

Simplify arcmsr_hbaC_get_config function.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: update driver version to 11.4.0.6
James Smart [Sat, 9 Dec 2017 01:18:11 +0000 (17:18 -0800)]
scsi: lpfc: update driver version to 11.4.0.6

Update the driver version to 11.4.0.6

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: Beef up stat counters for debug
James Smart [Sat, 9 Dec 2017 01:18:10 +0000 (17:18 -0800)]
scsi: lpfc: Beef up stat counters for debug

If log verbose in not turned on, its hard to tell when certain error
paths get hit. Add stats counters and corresponding logic to
debugfs/sysfs to aid understanding what paths were traversed.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: Fix infinite wait when driver unregisters a remote NVME port.
James Smart [Sat, 9 Dec 2017 01:18:09 +0000 (17:18 -0800)]
scsi: lpfc: Fix infinite wait when driver unregisters a remote NVME port.

When unregistering a remote port the lpfc driver would eventually wait
for the remoteport_unreg done callback. But the driver never completed
the io aborts that would allow the connections to terminate thus the
unreg done callback was never issued.  Turns out the coding style of the
driver allowed for the wait to occur on the same cpu that the deferred
isr is called on. The blocking for the wait, blocked the isr, and as the
isr didn't run, the io aborts wouldn't finish.

Turns out there was never a good reason to block waiting for the unreg
done in the first place. The driver can continue execution and the ref
counting within the driver will do the right thing.

Resolve by removing the wait and patching up a few cases where the ref
counting didn't look right - mainly cases where the remote port comes
back before the aborts had completed and the unreg done had been
called. Additionally, a few places which used pointer values to guide
driver actions weren't protected by lock, so correct those.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: Fix issues connecting with nvme initiator
James Smart [Sat, 9 Dec 2017 01:18:08 +0000 (17:18 -0800)]
scsi: lpfc: Fix issues connecting with nvme initiator

In the lpfc discovery engine, when as a nvme target, where the driver
was performing mailbox io with the adapter for port login when a NVME
PRLI is received from the host. Rather than queue and eventually get
back to sending a response after the mailbox traffic, the driver
rejected the io with an error response.

Turns out this particular initiator didn't like the rejection values
(unable to process command/command in progress) so it never attempted a
retry of the PRLI. Thus the host never established nvme connectivity
with the lpfc target.

By changing the rejection values (to Logical Busy/nothing more), the
initiator accepted the response and would retry the PRLI, resulting in
nvme connectivity.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled
James Smart [Sat, 9 Dec 2017 01:18:07 +0000 (17:18 -0800)]
scsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled

When enabled for both SCSI and NVME support, and connected pt2pt to a
SCSI only target, the driver nodelist entry for the remote port is left
in PRLI_ISSUE state and no SCSI LUNs are discovered. Works fine if only
configured for SCSI support.

Error was due to some of the prli points still reflecting the need to
send only 1 PRLI. On a lot of fabric configs, targets were NVME only,
which meant the fabric-reported protocol attributes were only telling
the driver one protocol or the other. Thus things worked fine. With
pt2pt, the driver must send a PRLI for both protocols as there are no
hints on what the target supports. Thus pt2pt targets were hitting the
multiple PRLI issues.

Complete the dual PRLI support. Track explicitly whether scsi (fcp) or
nvme prli's have been sent. Accurately track protocol support detected
on each node as reported by the fabric or probed by PRLI traffic.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: Increase SCSI CQ and WQ sizes.
James Smart [Sat, 9 Dec 2017 01:18:06 +0000 (17:18 -0800)]
scsi: lpfc: Increase SCSI CQ and WQ sizes.

Increased the sizes of the SCSI WQ's and CQ's so that SCSI operation is
similar to that used by NVME. However, size increase restricted only to
those newer adapters that can support the larger WQE size, thus bigger
queue sizes.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: Fix receive PRLI handling
James Smart [Sat, 9 Dec 2017 01:18:05 +0000 (17:18 -0800)]
scsi: lpfc: Fix receive PRLI handling

Handling a rcv'ed PRLI incorrectly can cause the ndlp to end up in the
wrong state or the driver to ACC and PRLI when it should send LS_RJT.

The cause was due to the driver not properly looking at the PRLI type
and taking the multiple protocol support into consideration.

Resolved by adding checks in the various PRLI receive points to validate
PRLI type and reject if not valid for the enabled protocols and mode
(host vs target).

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: Fix -EOVERFLOW behavior for NVMET and defer_rcv
James Smart [Sat, 9 Dec 2017 01:18:04 +0000 (17:18 -0800)]
scsi: lpfc: Fix -EOVERFLOW behavior for NVMET and defer_rcv

The driver is all set to handle the defer_rcv api for the nvmet_fc
transport, yet didn't properly recognize the return status when the
defer_rcv occurred. The driver treated it simply as an error and aborted
the io. Several residual issues occurred at that point.

Finish the defer_rcv support: recognize the return status when the io
request is being handled in a deferred style. This stops the rogue
aborts; Replenish the async cmd rcv buffer in the deferred receive if
needed.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: lpfc: Fix random heartbeat timeouts during heavy IO
James Smart [Sat, 9 Dec 2017 01:18:03 +0000 (17:18 -0800)]
scsi: lpfc: Fix random heartbeat timeouts during heavy IO

NVME targets appear to randomly disconnect from the initiator when
running heavy IO.

The error is due to the host aggregate (across all controllers) io load
was beyond the maximum exchange count for nvme on the adapter. The
driver was properly returning a resource busy status, but the io load
was so great heartbeat commands would be bounced and not have a
successful retry within the fuzz amount for the nvme heartbeat (yes, a
very high io load!). Thus the target was terminating the controller due
to a keep alive failure.

Resolve by reserving a few exchanges (by counters) which can be used
when the adapter is out of normal exchanges and the command is a NVME
heartbeat command. As counters are used, while the reserved command is
outstanding, as soon as any other exchange completes, the counters are
adjusted and the reserved count is replenished. The heartbeat completes
execution in a normal fashion.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: add v3 hw suspend and resume
Xiang Chen [Fri, 8 Dec 2017 17:16:50 +0000 (01:16 +0800)]
scsi: hisi_sas: add v3 hw suspend and resume

For v3 hw SAS, it supports configuring power state from D0 to D3 for entering
Low Power status and power state from D3 to D0 for quit Low Power status.

When power state from D0 to D3, HW will send FLR to clear the registers of
ECAM and BAR space, and when power state from D3 to D0, it will clear the
registers of ECAM space only.

So when suspend, need to do like controller reset (including disable
interrupts/DQ/PHY/BUS), and also release slots after FLR. When resume,
re-config the registers of BAR space.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: re-add the lldd_port_deformed()
Xiang Chen [Fri, 8 Dec 2017 17:16:49 +0000 (01:16 +0800)]
scsi: hisi_sas: re-add the lldd_port_deformed()

In function sas_suspend_devices(), it requires callback lldd_port_deformed
callback to be implemented if lldd_port_deformed is implemented.

So add a stub for lldd_port_deformed.

Callback lldd_port_deformed was not required as the port deformation is done
elsewhere in the LLDD.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: fix SAS_QUEUE_FULL problem while running IO
Xiang Chen [Fri, 8 Dec 2017 17:16:48 +0000 (01:16 +0800)]
scsi: hisi_sas: fix SAS_QUEUE_FULL problem while running IO

This patch fix SAS_QUEUE_FULL problem. The test situation is close port while
running IO.

In sas_eh_handle_sas_errors(), SCSI EH will free sas_task of the device if
lldd_I_T_nexus_reset() return TMF_RESP_FUNC_COMPLETE or -ENODEV.  But in our
SAS driver, we only free slots of the device when the return value is
TMF_RESP_FUNC_COMPLETE. So if the return value is -ENODEV, the slot resource
will not free any more.

As an solution, we should also free slots of the device in
lldd_I_T_nexus_reset() if the return value is -ENODEV.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: add internal abort dev in some places
Xiaofei Tan [Fri, 8 Dec 2017 17:16:47 +0000 (01:16 +0800)]
scsi: hisi_sas: add internal abort dev in some places

We should do internal abort dev before TMF_ABORT_TASK_SET and TMF_LU_RESET.
Because we may only have done internal abort for single IO in the earlier part
of SCSI EH process. Even the internal abort to the single IO, we also don't
know whether it is successful.

Besides, we should release slots of the device in hisi_sas_abort_task_set() if
the abort is successful.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: judge result of internal abort
Xiaofei Tan [Fri, 8 Dec 2017 17:16:46 +0000 (01:16 +0800)]
scsi: hisi_sas: judge result of internal abort

Normally, hardware should ensure that internal abort timeout will never
happen. If happen, it would be an SoC failure. What's more, HW will not
process any other commands if an internal abort hasn't return CQ, and they
will time out also.

So, we should judge the result of internal abort in SCSI EH, if it is failed,
we should give up to do TMF/softreset and return failure to the upper layer
directly.

This patch do following things to achieve this:

1. When internal abort timeout happened, we set return value to -EIO in
   hisi_sas_internal_task_abort().

2. If prep_abort() is not support, let hisi_sas_internal_task_abort() return
   TMF_RESP_FUNC_FAILED.

3. If hisi_sas_internal_task_abort() return an negative number, it can be
   thought that it not executed properly or internal abort timeout. Then we
   won't do behind TMF or softreset, and return failure directly.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: do link reset for some CHL_INT2 ints
Xiaofei Tan [Fri, 8 Dec 2017 17:16:45 +0000 (01:16 +0800)]
scsi: hisi_sas: do link reset for some CHL_INT2 ints

We should do link reset of PHY when identify timeout or STP link timeout. They
are internal events of SOC and are notified to driver through interrupts of
CHL_INT2.

Besides, we should add an delay work to do link reset as it needs sleep. So,
this patch add an new PHY event HISI_PHYE_LINK_RESET for this.

Notes: v2 HW doesn't report the event of STP link timeout.  So, we only need
to handle event of identify timeout for v2 HW.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: use an general way to delay PHY work
Xiaofei Tan [Fri, 8 Dec 2017 17:16:44 +0000 (01:16 +0800)]
scsi: hisi_sas: use an general way to delay PHY work

Use an general way to do delay work for a PHY. Then it will be easier to add
new delayed work for a PHY in future.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: add v2 hw port AXI error handling support
Xiaofei Tan [Fri, 8 Dec 2017 17:16:43 +0000 (01:16 +0800)]
scsi: hisi_sas: add v2 hw port AXI error handling support

Add port AXI errors handling for v2 hw. We do host controller reset for such
errors.

Besides, change port muli-bits ECC error handling, and we should also do host
reset for such error. So, this patch put them in the same struct with port AXI
error.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: improve int_chnl_int_v2_hw() consistency with v3 hw
Xiaofei Tan [Fri, 8 Dec 2017 17:16:42 +0000 (01:16 +0800)]
scsi: hisi_sas: improve int_chnl_int_v2_hw() consistency with v3 hw

Change code format of int_chnl_int_v2_hw() to be consistent with v3 hw to
reduce an tag indent.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: add some print to enhance debugging
Xiang Chen [Fri, 8 Dec 2017 17:16:41 +0000 (01:16 +0800)]
scsi: hisi_sas: add some print to enhance debugging

Add some print at some places such as error info and cq of exception IO,
device found etc, and also adjust some log levels.

All this to assist debugging ability.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: add RAS feature for v3 hw
Xiaofei Tan [Fri, 8 Dec 2017 17:16:40 +0000 (01:16 +0800)]
scsi: hisi_sas: add RAS feature for v3 hw

We use PCIe AER to support RAS feature for v3 hw.  This driver should do
following two things to support this:

1. Enable RAS interrupts, so that errors can be reported to RAS module.

2. Realize err_handler for sas_v3_pci_driver. Then if non-fatal error is
   detected, print error source and try to recover SAS controller.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: change ncq process for v3 hw
Xiang Chen [Fri, 8 Dec 2017 17:16:39 +0000 (01:16 +0800)]
scsi: hisi_sas: change ncq process for v3 hw

For v3 hw, each NCQ will return a CQ, so it is no need to acquire IPTT from
ITCT, just acquire it from IPTT field of CQ.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: add an mechanism to do reset work synchronously
Xiaofei Tan [Fri, 8 Dec 2017 17:16:38 +0000 (01:16 +0800)]
scsi: hisi_sas: add an mechanism to do reset work synchronously

Sometimes it is required to know when the controller reset has completed and
also if it has completed successfully.  For such places, we call
hisi_sas_controller_reset() directly before. That may lead to multiple calls
to this function.

This patch create a per-reset structure which contains a completion structure
and status flag to know when the reset completes and also the status. It is
also in hisi_hba.wq to do reset work.

As all host reset works are done in hisi_hba.wq, we don't worry multiple calls
to hisi_sas_controller_reset().

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: modify hisi_sas_dev_gone() for reset
Xiang Chen [Fri, 8 Dec 2017 17:16:37 +0000 (01:16 +0800)]
scsi: hisi_sas: modify hisi_sas_dev_gone() for reset

Do a couple of changes for when HISI_SAS_RESET_BIT is set for HBA:

 - Clearing ITCT is not necessary

 - Remove internal abort as it will fail during reset

Flag sas_dev->dev_type is kept as SAS_PHY_UNUSED.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: some optimizations of host controller reset
Xiaofei Tan [Fri, 8 Dec 2017 17:16:36 +0000 (01:16 +0800)]
scsi: hisi_sas: some optimizations of host controller reset

This patch do following optimizations to host controller reset:

1. Unblock scsi requests before rescanning topology, as SCSI command need be
   used if new device is found during rescanning topology.

2. Remove drain_workqueue(hisi_hba->wq) and drain_workqueue(shost->work_q), as
   there is no need to ensure that all PHYs event are done before exiting host
   reset.

3. Improve message print level of host reset. Host reset is an important and
   very few occurrence event. We should know its progress even when not
   debugging.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: optimise port id refresh function
Xiaofei Tan [Fri, 8 Dec 2017 17:16:35 +0000 (01:16 +0800)]
scsi: hisi_sas: optimise port id refresh function

Currently refreshing the PHY port id after reset is done in the rescan
topology function, which is quite late in the reset process. It could be moved
earlier in the process, as the port id can be refreshed once the PHYs become
ready.

In addition to this, we should set the hisi_sas_dev port id to 0xff (invalid
port id) if all PHYs of this port remain down for the same device.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: relocate clearing ITCT and freeing device
Xiaofei Tan [Fri, 8 Dec 2017 17:16:34 +0000 (01:16 +0800)]
scsi: hisi_sas: relocate clearing ITCT and freeing device

In certain scenarios we may just want to clear the ITCT for a device, and not
free other resources like the SATA bitmap using in v2 hw.

To facilitate this, this patch relocates the code of clearing ITCT from
free_device() to a new hw interface clear_itct().  Then for some hw, we should
not realise free_device() if there's nothing left to do for it.

[mkp: typo]

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: fix dma_unmap_sg() parameter
Xiang Chen [Fri, 8 Dec 2017 17:16:33 +0000 (01:16 +0800)]
scsi: hisi_sas: fix dma_unmap_sg() parameter

For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.

Fix this usage.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: hisi_sas: initialize dq spinlock before use
Xiang Chen [Fri, 8 Dec 2017 17:16:32 +0000 (01:16 +0800)]
scsi: hisi_sas: initialize dq spinlock before use

It is required to initialize the dq spinlock before use, which was not being
done, so fix it. This issue can be detected when CONFIG_DEBUG_SPINLOCK is
enabled.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: remove duplicate includes
Pravin Shedge [Wed, 6 Dec 2017 17:08:03 +0000 (22:38 +0530)]
scsi: qla2xxx: remove duplicate includes

These duplicate includes have been found with scripts/checkincludes.pl
but they have been removed manually to avoid removing false positives.

Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Suppress gcc 7 fall-through warnings
Bart Van Assche [Fri, 8 Dec 2017 00:02:46 +0000 (16:02 -0800)]
scsi: qla2xxx: Suppress gcc 7 fall-through warnings

Avoid that building with gcc 7 and W=1 triggers warnings similar to the
following:

drivers/scsi/qla2xxx/qla_isr.c:1189:27: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Cc: Quinn Tran <quinn.tran@cavium.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: fnic: add a space after %p in printf format
Nicolas Iooss [Sun, 10 Dec 2017 19:23:11 +0000 (20:23 +0100)]
scsi: fnic: add a space after %p in printf format

fnic_fcpio_icmnd_cmpl_handler() displays the value of sc with:

    FNIC_SCSI_DBG(KERN_INFO...
        "... sc = 0x%p"
        "scsi_status ..."
        ...

As the literal strings get merged, the function uses %ps instead of the
intended raw %p format. Fix this by inserting a space.

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: documentation: add scsi_common.c to SCSI driver-api
Randy Dunlap [Sun, 10 Dec 2017 18:11:44 +0000 (10:11 -0800)]
scsi: documentation: add scsi_common.c to SCSI driver-api

Add exported functions from scsi_common.c to the SCSI driver API
documentation.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: core: doc. fixes to scsi_common.c
Randy Dunlap [Sun, 10 Dec 2017 18:11:33 +0000 (10:11 -0800)]
scsi: core: doc. fixes to scsi_common.c

Clean up some comment typos and fix some errors in documentation.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: remove redundant check for secs < 0
Colin Ian King [Sat, 9 Dec 2017 00:34:14 +0000 (00:34 +0000)]
scsi: arcmsr: remove redundant check for secs < 0

The check for secs being less than zero is redundant for two reasons.
Firstly, secs is unsigned so the check is always going to be false.
Secondly, if secs was signed the proceeding calculation of secs is never
going to be negative.  Hence we can remove this redundant check and day
and secs re-adjustment.

Detected by static analysis with smatch:
arcmsr_set_iop_datetime() warn: unsigned 'secs' is never less than zero.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: bfa: convert to strlcpy/strlcat
Arnd Bergmann [Mon, 4 Dec 2017 14:47:00 +0000 (15:47 +0100)]
scsi: bfa: convert to strlcpy/strlcat

The bfa driver has a number of real issues with string termination
that gcc-8 now points out:

drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_iocmd_port_get_attr':
drivers/scsi/bfa/bfad_bsg.c:320:9: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:775:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:781:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:788:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:801:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:808:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:837:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:844:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:852:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:778:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:784:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:803:3: error: 'strncat' output may be truncated copying 44 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:811:3: error: 'strncat' output may be truncated copying 16 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:840:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:847:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_hbaattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2657:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c:2659:11: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ms_gmal_response':
drivers/scsi/bfa/bfa_fcs_lport.c:3232:5: error: 'strncpy' output may be truncated copying 16 bytes from a string of length 247 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:4670:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:4682:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_util_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:5206:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:5215:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_portattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2751:2: error: 'strncpy' specified bound 128 equals destination size [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rspnid_build':
drivers/scsi/bfa/bfa_fcbuild.c:1254:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c:1253:25: note: length computed here
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rsnn_nn_build':
drivers/scsi/bfa/bfa_fcbuild.c:1275:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]

In most cases, this can be addressed by correctly calling strlcpy and
strlcat instead of strncpy/strncat, with the size of the destination
buffer as the last argument.

For consistency, I'm changing the other callers of strncpy() in this
driver the same way.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: scsi_debug: Add support for injecting SCSI_MLQUEUE_HOST_BUSY
Bart Van Assche [Thu, 7 Dec 2017 22:56:18 +0000 (14:56 -0800)]
scsi: scsi_debug: Add support for injecting SCSI_MLQUEUE_HOST_BUSY

Although it is important to be able to trigger the code in the SCSI core
for SCSI_MLQUEUE_HOST_BUSY handling, currently it is nontrivial to
trigger that code. Hence this patch that adds a new error injection
option to the scsi_debug driver for making the .queue_rq()
implementation of this driver return SCSI_MLQUEUE_HOST_BUSY.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: devinfo: replace "Dell PV 650F" with "EMC CLARiiON"
Xose Vazquez Perez [Thu, 23 Nov 2017 19:16:14 +0000 (20:16 +0100)]
scsi: devinfo: replace "Dell PV 650F" with "EMC CLARiiON"

The Dell PV650F is a re-branded CLARiiON FC5700.  And DGC/RAID,DISK
identifies all CLARiiON family.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: dh: add new rdac devices
Xose Vazquez Perez [Fri, 17 Nov 2017 21:05:13 +0000 (22:05 +0100)]
scsi: dh: add new rdac devices

Add IBM 3542 and 3552, arrays: FAStT200 and FAStT500.

Add full STK OPENstorage family, arrays: 9176, D173, D178, D210, D220,
D240 and D280.

Add STK BladeCtlr family, arrays: B210, B220, B240 and B280.

These changes were done in multipath-tools time ago.

Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: device-mapper development <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: devinfo: apply to HP XP the same flags as Hitachi VSP
Xose Vazquez Perez [Fri, 17 Nov 2017 20:31:36 +0000 (21:31 +0100)]
scsi: devinfo: apply to HP XP the same flags as Hitachi VSP

Commit 56f3d383f37b ("scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI
OPEN-V blacklist entry") modified some Hitachi entries:

    HITACHI is always supporting VPD pages, even though it's claiming to
    support SCSI Revision 3 only.

The same should have been done also for HP-rebranded.

[mkp: checkpatch and tweaked commit message]

Cc: Hannes Reinecke <hare@suse.de>
Cc: Takahiro Yasui <takahiro.yasui@hds.com>
Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: devinfo: Apply to HP-rebranded the same flags as Hitachi
Xose Vazquez Perez [Fri, 17 Nov 2017 20:19:14 +0000 (21:19 +0100)]
scsi: devinfo: Apply to HP-rebranded the same flags as Hitachi

Commit 627511e3e675 ("[SCSI] scsi_devinfo: update Hitachi entries (v2)")
modified some Hitachi entries:

    Four models, OPEN-/DF400/DF500/DISK-SUBSYSTEM, can handle
    REPORT_LUN, and the BLIST_REPORTLUN2 flag needs to be set. And DF600
    doesn't require any flags because it returns ANSI 03h (SPC).

The same should have been done also for HP counterparts.

[mkp: checkpatch and tweaked commit message]

Cc: Takahiro Yasui <takahiro.yasui@hds.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Matthias Rudolph <Matthias.Rudolph@hds.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: pmcraid: use correct size unit when calling find_first_zero_bit()
Niklas Cassel [Thu, 16 Nov 2017 17:38:06 +0000 (18:38 +0100)]
scsi: pmcraid: use correct size unit when calling find_first_zero_bit()

find_first_zero_bit()'s parameter 'size' is defined in bits, not in
bytes.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: fusion: clean up some indentations
Colin Ian King [Wed, 6 Dec 2017 15:02:43 +0000 (15:02 +0000)]
scsi: fusion: clean up some indentations

There are several places where the source is not indented correctly with
either too many or too few levels of intentation. Fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: dh: Remove scsi_dh_remove_device()
Bart Van Assche [Fri, 8 Dec 2017 00:00:59 +0000 (16:00 -0800)]
scsi: dh: Remove scsi_dh_remove_device()

Remove this function since it has an empty body.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: core: Unexport scsi_initialize_rq()
Bart Van Assche [Thu, 7 Dec 2017 23:59:31 +0000 (15:59 -0800)]
scsi: core: Unexport scsi_initialize_rq()

Commit 651a01364994 ("scsi: scsi_transport_sas: switch to bsg-lib for
SMP passthrough") removed the only call to scsi_initialize_rq() from
outside the SCSI core. Hence unexport scsi_initialize_rq().

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Update driver version to 10.00.00.03-k
himanshu.madhani@cavium.com [Mon, 4 Dec 2017 22:45:17 +0000 (14:45 -0800)]
scsi: qla2xxx: Update driver version to 10.00.00.03-k

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix memory leak in dual/target mode
himanshu.madhani@cavium.com [Mon, 4 Dec 2017 22:45:16 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix memory leak in dual/target mode

When driver is loaded in Target/Dual mode, it creates QPair to support
MQ and allocates resources for each QPair. This Qpair initialization is
delayed until the FW personality is changed to Dual/Target mode by
issuing chip reset. At the time of chip reset firmware is re-initilized
in correct personality all the QPairs are initialized by sending
MBC_INITIALIZE_MULTIQ (001Fh).

This patch fixes memory leak by adding check to issue
MBC_INITIALIZE_MULTIQ command only while deleting rsp/req queue when the
flag is set for initiator mode, and clean up QPair resources correctly
during the driver unload. This MBX does not need to be issued for
Target/Dual mode because chip reset will reset ISP.

Fixes: d65237c7f0860 ("scsi: qla2xxx: Fix mailbox failure while deleting Queue pairs")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix system crash in qlt_plogi_ack_unref
Quinn Tran [Mon, 4 Dec 2017 22:45:15 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix system crash in qlt_plogi_ack_unref

Fix system crash due to NULL pointer access.

qlt_plogi_ack_t and fc_port structures were not properly bound before
calling qlt_plogi_ack_unref().

RIP: 0010:qlt_plogi_ack_unref+0xa1/0x150 [qla2xxx]
Call Trace:
qla24xx_create_new_sess+0xb1/0x320 [qla2xxx]
qla2x00_do_work+0x123/0x260 [qla2xxx]
qla2x00_iocb_work_fn+0x30/0x40 [qla2xxx]
process_one_work+0x1f3/0x530
worker_thread+0x4e/0x480
kthread+0x10c/0x140

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Remove aborting ELS IOCB call issued as part of timeout.
Giridhar Malavali [Mon, 4 Dec 2017 22:45:14 +0000 (14:45 -0800)]
scsi: qla2xxx: Remove aborting ELS IOCB call issued as part of timeout.

This fix the spinlock recursion issue seen while unloading the driver.

14 [ffff9f2e21e03db8] native_queued_spin_lock_slowpath at ffffffffad0d8802
15 [ffff9f2e21e03dc0] do_raw_spin_lock at ffffffffad0d99e4
16 [ffff9f2e21e03dd8] _raw_spin_lock_irqsave at ffffffffad652471
17 [ffff9f2e21e03e00] qla2x00_els_dcmd_iocb_timeout at ffffffffc070cd63
18 [ffff9f2e21e03e40] qla2x00_sp_timeout at ffffffffc06f06d3 [qla2xxx]
19 [ffff9f2e21e03e68] call_timer_fn at ffffffffad0f97d8
20 [ffff9f2e21e03ed8] run_timer_softirq at ffffffffad0faf47
21 [ffff9f2e21e03f68] __softirqentry_text_start at ffffffffad655f32

Fixes: 6eb54715b54bb ("qla2xxx: Added interface to send explicit LOGO.")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Defer processing of GS IOCB calls
Giridhar Malavali [Mon, 4 Dec 2017 22:45:13 +0000 (14:45 -0800)]
scsi: qla2xxx: Defer processing of GS IOCB calls

This patch defers processing of GS IOCB calls from interrupt context to
avoid hardware spinlock recursion.

Following stack trace is seen

? mod_timer+0x193/0x330
? ql_dbg+0xa7/0xf0 [qla2xxx]
_raw_spin_lock_irqsave+0x31/0x40
qla2x00_start_sp+0x3b/0x250 [qla2xxx]
qla24xx_async_gnl+0x1d3/0x240 [qla2xxx]
qla24xx_fcport_handle_login+0x285/0x290 [qla2xxx]
? vprintk_func+0x20/0x50

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Clear loop id after delete
Quinn Tran [Mon, 4 Dec 2017 22:45:12 +0000 (14:45 -0800)]
scsi: qla2xxx: Clear loop id after delete

Clear loop id after delete to prevent session invalidation of stale
session.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix scan state field for fcport
Quinn Tran [Mon, 4 Dec 2017 22:45:11 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix scan state field for fcport

Add correct value of scan_state field indicating state of the FC port

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcport
Quinn Tran [Mon, 4 Dec 2017 22:45:10 +0000 (14:45 -0800)]
scsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcport

Current code manually allocate an fcport structure that is not properly
initialize. Replace kzalloc with qla2x00_alloc_fcport, so that all
fields are initialized.  Also set set scan flag to port found

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix abort command deadlock due to spinlock
Quinn Tran [Mon, 4 Dec 2017 22:45:09 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix abort command deadlock due to spinlock

Original code acquires hardware_lock to add Abort IOCB onto driver
request queue for processing. However, abort_command() will also acquire
hardware lock to look up sp pointer before issuing abort IOCB command
resulting into a deadlock. This patch safely removes the possible
deadlock scenario by removing extra spinlock.

Fixes: 6eb54715b54bb ("qla2xxx: Added interface to send explicit LOGO.")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix PRLI state check
Quinn Tran [Mon, 4 Dec 2017 22:45:08 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix PRLI state check

Get Port Database MBX cmd is to validate current Login state upon PRLI
completion. Current code looks at the last login state for re-validation
which was incorrect. This patch removed incorrect state check.

Fixes: 15f30a5752287 ("qla2xxx: Use IOCB interface to submit non-critical MBX.")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix Relogin being triggered too fast
Quinn Tran [Mon, 4 Dec 2017 22:45:06 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix Relogin being triggered too fast

Current driver design schedules relogin process via DPC thread every 1
second. In a large fabric, this DPC thread tries to schedule too many
jobs and might get overloaded. As a result of this processing of DPC
thread, it can schedule relogin earlier than 1 second.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Relogin to target port on a cable swap
Quinn Tran [Mon, 4 Dec 2017 22:45:05 +0000 (14:45 -0800)]
scsi: qla2xxx: Relogin to target port on a cable swap

If user swaps one target port for another target port for same switch
port, the new target port is not being recognized by the driver. Current
code assumes that old Target port has recovered from link down. The fix
will ask switch what is the WWPN of a specific NportID (GPNID) rather
than assuming it's the same Target port which has came back.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix NPIV host cleanup in target mode
Sawan Chandak [Mon, 4 Dec 2017 22:45:04 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix NPIV host cleanup in target mode

Add check to make sure we are cleaning up global target host list only
for NPIV hosts

Fixes: bdbe24de281e2 ("scsi: qla2xxx: Cleanup NPIV host in target mode during config teardown")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix login state machine stuck at GPDB
Quinn Tran [Mon, 4 Dec 2017 22:45:03 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix login state machine stuck at GPDB

This patch returns discovery state machine back to Login Complete.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Serialize GPNID for multiple RSCN
Quinn Tran [Mon, 4 Dec 2017 22:45:02 +0000 (14:45 -0800)]
scsi: qla2xxx: Serialize GPNID for multiple RSCN

GPNID is triggered by RSCN. For multiple RSCNs of the same affected
NPORT ID, serialize the GPNID to prevent confusion.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Retry switch command on time out
Quinn Tran [Mon, 4 Dec 2017 22:45:01 +0000 (14:45 -0800)]
scsi: qla2xxx: Retry switch command on time out

Retry GID_PN & GPN_ID switch commands for time out case.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix re-login for Nport Handle in use
Quinn Tran [Mon, 4 Dec 2017 22:45:00 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix re-login for Nport Handle in use

When NPort Handle is in use, driver needs to mark the handle as used and
pick another. Instead, the code clears the handle and re-pick the same
handle.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Skip IRQ affinity for Target QPairs
Quinn Tran [Mon, 4 Dec 2017 22:44:59 +0000 (14:44 -0800)]
scsi: qla2xxx: Skip IRQ affinity for Target QPairs

Fix co-existence between Block MQ and Target Mode. Block MQ and
initiator mode requires midlayer queue mapping to check for IRQ to be
affinitized. For target mode, it's not the case.

Fixes: 09620eeb62c41 ("scsi: qla2xxx: Add debug knob for user control workload")
Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Move session delete to driver work queue
Quinn Tran [Mon, 4 Dec 2017 22:44:58 +0000 (14:44 -0800)]
scsi: qla2xxx: Move session delete to driver work queue

Move session delete from system work queue to driver's work queue for in
time processing.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix gpnid error processing
Quinn Tran [Mon, 4 Dec 2017 22:44:57 +0000 (14:44 -0800)]
scsi: qla2xxx: Fix gpnid error processing

Stop GPNID command from advancing if command has failed.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: qla2xxx: Fix system crash for Notify ack timeout handling
Quinn Tran [Mon, 4 Dec 2017 22:44:56 +0000 (14:44 -0800)]
scsi: qla2xxx: Fix system crash for Notify ack timeout handling

Fix NULL pointer crash due to missing timeout handling callback for
Notify Ack IOCB.

Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: scsi_debug: add cdb_len parameter
Douglas Gilbert [Tue, 5 Dec 2017 05:05:49 +0000 (00:05 -0500)]
scsi: scsi_debug: add cdb_len parameter

While testing "sd: Micro-optimize READ / WRITE CDB encoding" patches it
was helpful to check various code paths associated with READ/WRITE 6, 10
and 16 byte cdb variants. There seems to be no user space "knobs" to
twiddle use_10_for_rw and friends in the scsi_device structure.  So add
a parameter to scsi_debug called "cdb_len" for this purpose.

[mkp: fixed typo]

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: core: Introduce scsi_devinfo_key enumeration type
Bart Van Assche [Mon, 4 Dec 2017 18:36:33 +0000 (10:36 -0800)]
scsi: core: Introduce scsi_devinfo_key enumeration type

Since symbolic names for the device information keys alread exist,
associate an enumeration type with these symbolic values. This change
makes it clear what the valid values for the 'key' arguments are.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: core: scsi_get_device_flags_keyed(): Always return device flags
Bart Van Assche [Mon, 4 Dec 2017 18:36:31 +0000 (10:36 -0800)]
scsi: core: scsi_get_device_flags_keyed(): Always return device flags

Since scsi_get_device_flags_keyed() callers do not check whether or not
the returned value is an error code, change that function such that it
returns a flags value even if the 'key' argument is invalid.  Note:
since commit 28a0bc4120d3 ("scsi: sd: Implement blacklist option for
WRITE SAME w/ UNMAP") bit 31 is a valid device information flag so
checking whether bit 31 is set in the return value is not sufficient to
tell the difference between an error code and a flags value.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: core: Convert a source code comment into a runtime check
Bart Van Assche [Mon, 4 Dec 2017 18:06:24 +0000 (10:06 -0800)]
scsi: core: Convert a source code comment into a runtime check

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: core: Ensure that the SCSI error handler gets woken up
Bart Van Assche [Mon, 4 Dec 2017 18:06:23 +0000 (10:06 -0800)]
scsi: core: Ensure that the SCSI error handler gets woken up

If scsi_eh_scmd_add() is called concurrently with
scsi_host_queue_ready() while shost->host_blocked > 0 then it can
happen that neither function wakes up the SCSI error handler. Fix
this by making every function that decreases the host_busy counter
wake up the error handler if necessary and by protecting the
host_failed checks with the SCSI host lock.

Reported-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
References: https://marc.info/?l=linux-kernel&m=150461610630736
Fixes: commit 746650160866 ("scsi: convert host_busy to atomic_t")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Konstantin Khorenko <khorenko@virtuozzo.com>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agorcu: Export init_rcu_head() and destroy_rcu_head() to GPL modules
Paul E. McKenney [Thu, 7 Dec 2017 17:40:38 +0000 (09:40 -0800)]
rcu: Export init_rcu_head() and destroy_rcu_head() to GPL modules

Use of init_rcu_head() and destroy_rcu_head() from modules results in
the following build-time error with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y:

ERROR: "init_rcu_head" [drivers/scsi/scsi_mod.ko] undefined!
ERROR: "destroy_rcu_head" [drivers/scsi/scsi_mod.ko] undefined!

This commit therefore adds EXPORT_SYMBOL_GPL() for each to allow them to
be used by GPL-licensed kernel modules.

Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: Fix command result for CHECK_CONDITION
Ching Huang [Tue, 5 Dec 2017 03:28:37 +0000 (11:28 +0800)]
scsi: arcmsr: Fix command result for CHECK_CONDITION

Fix report command result error when CHECK_CONDITION.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: Update driver version to v1.40.00.04-20171130
Ching Huang [Tue, 5 Dec 2017 02:29:44 +0000 (10:29 +0800)]
scsi: arcmsr: Update driver version to v1.40.00.04-20171130

Update driver version to v1.40.00.04-20171130

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: Add driver module parameter msix_enable
Ching Huang [Tue, 5 Dec 2017 02:26:38 +0000 (10:26 +0800)]
scsi: arcmsr: Add driver module parameter msix_enable

Add module parameter msix_enable so user has the option of disabling
MSI-X interrupts if there is a platform problem.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: Add driver module parameter msi_enable
Ching Huang [Tue, 5 Dec 2017 02:24:01 +0000 (10:24 +0800)]
scsi: arcmsr: Add driver module parameter msi_enable

Add module parameter msi_enable so user has the option of disabling MSI
interrupts if there is a platform problem.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: Fix grammar
Ching Huang [Tue, 5 Dec 2017 02:18:47 +0000 (10:18 +0800)]
scsi: arcmsr: Fix grammar

Fix grammar.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: arcmsr: Adjust whitespace
Ching Huang [Tue, 5 Dec 2017 02:16:13 +0000 (10:16 +0800)]
scsi: arcmsr: Adjust whitespace

Adjust tabs and whitespace.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>