Mark Brown [Thu, 10 Aug 2023 11:28:19 +0000 (12:28 +0100)]
arm64/ptrace: Ensure that SME is set up for target when writing SSVE state
commit
5d0a8d2fba50e9c07cde4aad7fba28c008b07a5b upstream.
When we use NT_ARM_SSVE to either enable streaming mode or change the
vector length for a process we do not currently do anything to ensure that
there is storage allocated for the SME specific register state. If the
task had not previously used SME or we changed the vector length then
the task will not have had TIF_SME set or backing storage for ZA/ZT
allocated, resulting in inconsistent register sizes when saving state
and spurious traps which flush the newly set register state.
We should set TIF_SME to disable traps and ensure that storage is
allocated for ZA and ZT if it is not already allocated. This requires
modifying sme_alloc() to make the flush of any existing register state
optional so we don't disturb existing state for ZA and ZT.
Fixes:
e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 5.19.x
Link: https://lore.kernel.org/r/20230810-arm64-fix-ptrace-race-v1-1-a5361fad2bd6@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Tue, 15 Aug 2023 18:08:47 +0000 (14:08 -0400)]
netfilter: set default timeout to 3 secs for sctp shutdown send and recv state
commit
9bfab6d23a2865966a4f89a96536fbf23f83bc8c upstream.
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.
As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.
Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:
net.netfilter.nf_conntrack_sctp_timeout_shutdown_recd = 0
net.netfilter.nf_conntrack_sctp_timeout_shutdown_sent = 0
This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.
Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.
Fixes:
9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Kravetz [Tue, 11 Jul 2023 22:09:41 +0000 (15:09 -0700)]
hugetlb: do not clear hugetlb dtor until allocating vmemmap
commit
32c877191e022b55fe3a374f3d7e9fb5741c514d upstream.
Patch series "Fix hugetlb free path race with memory errors".
In the discussion of Jiaqi Yan's series "Improve hugetlbfs read on
HWPOISON hugepages" the race window was discovered.
https://lore.kernel.org/linux-mm/
20230616233447.GB7371@monkey/
Freeing a hugetlb page back to low level memory allocators is performed
in two steps.
1) Under hugetlb lock, remove page from hugetlb lists and clear destructor
2) Outside lock, allocate vmemmap if necessary and call low level free
Between these two steps, the hugetlb page will appear as a normal
compound page. However, vmemmap for tail pages could be missing.
If a memory error occurs at this time, we could try to update page
flags non-existant page structs.
A much more detailed description is in the first patch.
The first patch addresses the race window. However, it adds a
hugetlb_lock lock/unlock cycle to every vmemmap optimized hugetlb page
free operation. This could lead to slowdowns if one is freeing a large
number of hugetlb pages.
The second path optimizes the update_and_free_pages_bulk routine to only
take the lock once in bulk operations.
The second patch is technically not a bug fix, but includes a Fixes tag
and Cc stable to avoid a performance regression. It can be combined with
the first, but was done separately make reviewing easier.
This patch (of 2):
Freeing a hugetlb page and releasing base pages back to the underlying
allocator such as buddy or cma is performed in two steps:
- remove_hugetlb_folio() is called to remove the folio from hugetlb
lists, get a ref on the page and remove hugetlb destructor. This
all must be done under the hugetlb lock. After this call, the page
can be treated as a normal compound page or a collection of base
size pages.
- update_and_free_hugetlb_folio() is called to allocate vmemmap if
needed and the free routine of the underlying allocator is called
on the resulting page. We can not hold the hugetlb lock here.
One issue with this scheme is that a memory error could occur between
these two steps. In this case, the memory error handling code treats
the old hugetlb page as a normal compound page or collection of base
pages. It will then try to SetPageHWPoison(page) on the page with an
error. If the page with error is a tail page without vmemmap, a write
error will occur when trying to set the flag.
Address this issue by modifying remove_hugetlb_folio() and
update_and_free_hugetlb_folio() such that the hugetlb destructor is not
cleared until after allocating vmemmap. Since clearing the destructor
requires holding the hugetlb lock, the clearing is done in
remove_hugetlb_folio() if the vmemmap is present. This saves a
lock/unlock cycle. Otherwise, destructor is cleared in
update_and_free_hugetlb_folio() after allocating vmemmap.
Note that this will leave hugetlb pages in a state where they are marked
free (by hugetlb specific page flag) and have a ref count. This is not
a normal state. The only code that would notice is the memory error
code, and it is set up to retry in such a case.
A subsequent patch will create a routine to do bulk processing of
vmemmap allocation. This will eliminate a lock/unlock cycle for each
hugetlb page in the case where we are freeing a large number of pages.
Link: https://lkml.kernel.org/r/20230711220942.43706-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20230711220942.43706-2-mike.kravetz@oracle.com
Fixes:
ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saaem Rizvi [Mon, 6 Mar 2023 20:10:13 +0000 (15:10 -0500)]
drm/amd/display: Implement workaround for writing to OTG_PIXEL_RATE_DIV register
commit
74fa4c81aadf418341f0d073c864ea7dca730a2e upstream.
[Why and How]
Current implementation requires FPGA builds to take a different
code path from DCN32 to write to OTG_PIXEL_RATE_DIV. Now that
we have a workaround to write to OTG_PIXEL_RATE_DIV register without
blanking display on hotplug on DCN32, we can allow the code paths for
FPGA to be exactly the same allowing for more consistent
testing.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincent Guittot [Wed, 1 Feb 2023 14:36:28 +0000 (15:36 +0100)]
sched/fair: Remove capacity inversion detection
commit
a2e90611b9f425adbbfcdaa5b5e49958ddf6f61b upstream.
Remove the capacity inversion detection which is now handled by
util_fits_cpu() returning -1 when we need to continue to look for a
potential CPU with better performance.
This ends up almost reverting patches below except for some comments:
commit
da07d2f9c153 ("sched/fair: Fixes for capacity inversion detection")
commit
aa69c36f31aa ("sched/fair: Consider capacity inversion in util_fits_cpu()")
commit
44c7b80bffc3 ("sched/fair: Detect capacity inversion")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230201143628.270912-3-vincent.guittot@linaro.org
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincent Guittot [Wed, 1 Feb 2023 14:36:27 +0000 (15:36 +0100)]
sched/fair: unlink misfit task from cpu overutilized
commit
e5ed0550c04c5469ecdc1634d8aa18c8609590f0 upstream.
By taking into account uclamp_min, the 1:1 relation between task misfit
and cpu overutilized is no more true as a task with a small util_avg may
not fit a high capacity cpu because of uclamp_min constraint.
Add a new state in util_fits_cpu() to reflect the case that task would fit
a CPU except for the uclamp_min hint which is a performance requirement.
Use -1 to reflect that a CPU doesn't fit only because of uclamp_min so we
can use this new value to take additional action to select the best CPU
that doesn't match uclamp_min hint.
When util_fits_cpu() returns -1, we will continue to look for a possible
CPU with better performance, which replaces Capacity Inversion detection
with capacity_orig_of() - thermal_load_avg to detect a capacity inversion.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-and-tested-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Link: https://lore.kernel.org/r/20230201143628.270912-2-vincent.guittot@linaro.org
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Senozhatsky [Tue, 18 Apr 2023 07:46:39 +0000 (16:46 +0900)]
zsmalloc: allow only one active pool compaction context
commit
d2658f2052c7db6ec0a79977205f8cf1cb9effc2 upstream.
zsmalloc pool can be compacted concurrently by many contexts,
e.g.
cc1 handle_mm_fault()
do_anonymous_page()
__alloc_pages_slowpath()
try_to_free_pages()
do_try_to_free_pages(
lru_gen_shrink_node()
shrink_slab()
do_shrink_slab()
zs_shrinker_scan()
zs_compact()
Pool compaction is currently (basically) single-threaded as
it is performed under pool->lock. Having multiple compaction
threads results in unnecessary contention, as each thread
competes for pool->lock. This, in turn, affects all zsmalloc
operations such as zs_malloc(), zs_map_object(), zs_free(), etc.
Introduce the pool->compaction_in_progress atomic variable,
which ensures that only one compaction context can run at a
time. This reduces overall pool->lock contention in (corner)
cases when many contexts attempt to shrink zspool simultaneously.
Link: https://lkml.kernel.org/r/20230418074639.1903197-1-senozhatsky@chromium.org
Fixes:
c0547d0b6a4b ("zsmalloc: consolidate zs_pool's migrate_lock and size_class's locks")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Miess [Wed, 7 Jun 2023 15:11:44 +0000 (11:11 -0400)]
drm/amd/display: disable RCO for DCN314
commit
85e41f1ed5d94a26fe4e57003c399936d291ed70 upstream.
[Why]
RCO is causing error messages on some DCN314 systems
[How]
Force disable RCO for DCN314
Fixes:
17fbdbda9cc8 ("drm/amd/display: Enable dcn314 DPP RCO")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 2 Jun 2023 12:44:39 +0000 (14:44 +0200)]
ASoC: amd: vangogh: select CONFIG_SND_AMD_ACP_CONFIG
commit
812a05256d673b2b9c5db906775d1e6625ba4787 upstream.
The vangogh driver just gained a link time dependency that now causes
randconfig builds to fail:
x86_64-linux-ld: sound/soc/amd/vangogh/pci-acp5x.o: in function `snd_acp5x_probe':
pci-acp5x.c:(.text+0xbb): undefined reference to `snd_amd_acp_find_config'
Fixes:
e89f45edb747e ("ASoC: amd: vangogh: Add check for acp config flags in vangogh platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230602124447.863476-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Umio Yasuno [Tue, 8 Aug 2023 06:40:42 +0000 (06:40 +0000)]
drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7
commit
6a92761a86817ad15c9a562e2a809386237fae3e upstream.
Use the right metrics table version based on the firmware.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2720
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Huang [Mon, 14 Aug 2023 07:13:04 +0000 (15:13 +0800)]
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
commit
f1740b1ab2703b2a057da7cf33b03297e0381aa0 upstream.
GFX v11.0.1 reported fence fallback timer expired issue on
SDMA and GFX rings after S0ix resume. This is generated by
EOP interrupts are disabled when S0ix suspend but fails to
re-enable when resume because of the GFX is in GFXOFF.
[ 203.349571] [drm] Fence fallback timer expired on ring sdma0
[ 203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0
[ 203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0
For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers
to configure the fence driver interrupts for rings that belong to GFX.
The interrupts configuration will be restored by GFXOFF exit.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Thu, 18 May 2023 16:52:51 +0000 (11:52 -0500)]
drm/amd: flush any delayed gfxoff on suspend entry
commit
a7b7d9e8aee4f71b4c7151702fd74237b8cef989 upstream.
DCN 3.1.4 is reported to hang on s2idle entry if graphics activity
is happening during entry. This is because GFXOFF was scheduled as
delayed but RLC gets disabled in s2idle entry sequence which will
hang GFX IP if not already in GFXOFF.
To help this problem, flush any delayed work for GFXOFF early in
s2idle entry sequence to ensure that it's off when RLC is changed.
commit
4b31b92b143f ("drm/amdgpu: complete gfxoff allow signal during
suspend without delay") modified power gating flow so that if called
in s0ix that it ensured that GFXOFF wasn't put in work queue but
instead processed immediately.
This is dead code due to commit
10cb67eb8a1b ("drm/amdgpu: skip
CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly
called as part of the suspend entry code. Remove that dead code.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Thu, 3 Aug 2023 12:27:06 +0000 (15:27 +0300)]
drm/i915/sdvo: fix panel_type initialization
commit
2002eb6d3ea954dde9f8a223018d5335779937d0 upstream.
Commit
3f9ffce5765d ("drm/i915: Do panel VBT init early if the VBT
declares an explicit panel type") started using -1 as the value for
unset panel_type. It gets initialized in intel_panel_init_alloc(), but
the SDVO code never calls it.
Call intel_panel_init_alloc() to initialize the panel, including the
panel_type.
Reported-by: Tomi Leppänen <tomi@tomin.site>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8896
Fixes:
3f9ffce5765d ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Tomi Leppänen <tomi@tomin.site>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803122706.838721-1-jani.nikula@intel.com
(cherry picked from commit
26e60294e8eacedc8ebb33405b2c375fd80e0900)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wander Lairson Costa [Mon, 14 Aug 2023 16:51:19 +0000 (13:51 -0300)]
drm/qxl: fix UAF on handle creation
commit
c611589b4259ed63b9b77be6872b1ce07ec0ac16 upstream.
qxl_mode_dumb_create() dereferences the qobj returned by
qxl_gem_object_create_with_handle(), but the handle is the only one
holding a reference to it.
A potential attacker could guess the returned handle value and closes it
between the return of qxl_gem_object_create_with_handle() and the qobj
usage, triggering a use-after-free scenario.
Reproducer:
int dri_fd =-1;
struct drm_mode_create_dumb arg = {0};
void gem_close(int handle);
void* trigger(void* ptr)
{
int ret;
arg.width = arg.height = 0x20;
arg.bpp = 32;
ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg);
if(ret)
{
perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
exit(-1);
}
gem_close(arg.handle);
while(1) {
struct drm_mode_create_dumb args = {0};
args.width = args.height = 0x20;
args.bpp = 32;
ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &args);
if (ret) {
perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
exit(-1);
}
printf("[*] DRM_IOCTL_MODE_CREATE_DUMB created, %d\n", args.handle);
gem_close(args.handle);
}
return NULL;
}
void gem_close(int handle)
{
struct drm_gem_close args;
args.handle = handle;
int ret = ioctl(dri_fd, DRM_IOCTL_GEM_CLOSE, &args); // gem close handle
if (!ret)
printf("gem close handle %d\n", args.handle);
}
int main(void)
{
dri_fd= open("/dev/dri/card0", O_RDWR);
printf("fd:%d\n", dri_fd);
if(dri_fd == -1)
return -1;
pthread_t tid1;
if(pthread_create(&tid1,NULL,trigger,NULL)){
perror("[*] thread_create tid1\n");
return -1;
}
while (1)
{
gem_close(arg.handle);
}
return 0;
}
This is a KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
Write of size 1 at addr
ffff88801136c240 by task poc/515
CPU: 1 PID: 515 Comm: poc Not tainted 6.3.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
Call Trace:
<TASK>
__dump_stack linux/lib/dump_stack.c:88
dump_stack_lvl+0x48/0x70 linux/lib/dump_stack.c:106
print_address_description linux/mm/kasan/report.c:319
print_report+0xd2/0x660 linux/mm/kasan/report.c:430
kasan_report+0xd2/0x110 linux/mm/kasan/report.c:536
__asan_report_store1_noabort+0x17/0x30 linux/mm/kasan/report_generic.c:383
qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
RIP: 0033:0x7ff5004ff5f7
Code: 00 00 00 48 8b 05 99 c8 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 69 c8 0d 00 f7 d8 64 89 01 48
RSP: 002b:
00007ff500408ea8 EFLAGS:
00000286 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007ff5004ff5f7
RDX:
00007ff500408ec0 RSI:
00000000c02064b2 RDI:
0000000000000003
RBP:
00007ff500408ef0 R08:
0000000000000000 R09:
000000000000002a
R10:
0000000000000000 R11:
0000000000000286 R12:
00007fff1c6cdafe
R13:
00007fff1c6cdaff R14:
00007ff500408fc0 R15:
0000000000802000
</TASK>
Allocated by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_alloc_info+0x1e/0x40 linux/mm/kasan/generic.c:510
____kasan_kmalloc linux/mm/kasan/common.c:374
__kasan_kmalloc+0xc3/0xd0 linux/mm/kasan/common.c:383
kasan_kmalloc linux/./include/linux/kasan.h:196
kmalloc_trace+0x48/0xc0 linux/mm/slab_common.c:1066
kmalloc linux/./include/linux/slab.h:580
kzalloc linux/./include/linux/slab.h:720
qxl_bo_create+0x11a/0x610 linux/drivers/gpu/drm/qxl/qxl_object.c:124
qxl_gem_object_create+0xd9/0x360 linux/drivers/gpu/drm/qxl/qxl_gem.c:58
qxl_gem_object_create_with_handle+0xa1/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:89
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
Freed by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x60 linux/mm/kasan/generic.c:521
____kasan_slab_free linux/mm/kasan/common.c:236
____kasan_slab_free+0x180/0x1f0 linux/mm/kasan/common.c:200
__kasan_slab_free+0x12/0x30 linux/mm/kasan/common.c:244
kasan_slab_free linux/./include/linux/kasan.h:162
slab_free_hook linux/mm/slub.c:1781
slab_free_freelist_hook+0xd2/0x1a0 linux/mm/slub.c:1807
slab_free linux/mm/slub.c:3787
__kmem_cache_free+0x196/0x2d0 linux/mm/slub.c:3800
kfree+0x78/0x120 linux/mm/slab_common.c:1019
qxl_ttm_bo_destroy+0x140/0x1a0 linux/drivers/gpu/drm/qxl/qxl_object.c:49
ttm_bo_release+0x678/0xa30 linux/drivers/gpu/drm/ttm/ttm_bo.c:381
kref_put linux/./include/linux/kref.h:65
ttm_bo_put+0x50/0x80 linux/drivers/gpu/drm/ttm/ttm_bo.c:393
qxl_gem_object_free+0x3e/0x60 linux/drivers/gpu/drm/qxl/qxl_gem.c:42
drm_gem_object_free+0x5c/0x90 linux/drivers/gpu/drm/drm_gem.c:974
kref_put linux/./include/linux/kref.h:65
__drm_gem_object_put linux/./include/drm/drm_gem.h:431
drm_gem_object_put linux/./include/drm/drm_gem.h:444
qxl_gem_object_create_with_handle+0x151/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:100
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
The buggy address belongs to the object at
ffff88801136c000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 576 bytes inside of
freed 1024-byte region [
ffff88801136c000,
ffff88801136c400)
The buggy address belongs to the physical page:
page:
0000000089fc329b refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x11368
head:
0000000089fc329b order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
raw:
000fffffc0010200 ffff888007841dc0 dead000000000122 0000000000000000
raw:
0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88801136c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff88801136c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88801136c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
Instead of returning a weak reference to the qxl_bo object, return the
created drm_gem_object and let the caller decrement the reference count
when it no longer needs it. As a convenience, if the caller is not
interested in the gobj object, it can pass NULL to the parameter and the
reference counting is descremented internally.
The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940).
Link: https://www.zerodayinitiative.com/
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814165119.90847-1-wander@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yibin Ding [Wed, 2 Aug 2023 02:30:23 +0000 (10:30 +0800)]
mmc: block: Fix in_flight[issue_type] value error
commit
4b430d4ac99750ee2ae2f893f1055c7af1ec3dc5 upstream.
For a completed request, after the mmc_blk_mq_complete_rq(mq, req)
function is executed, the bitmap_tags corresponding to the
request will be cleared, that is, the request will be regarded as
idle. If the request is acquired by a different type of process at
this time, the issue_type of the request may change. It further
caused the value of mq->in_flight[issue_type] to be abnormal,
and a large number of requests could not be sent.
p1: p2:
mmc_blk_mq_complete_rq
blk_mq_free_request
blk_mq_get_request
blk_mq_rq_ctx_init
mmc_blk_mq_dec_in_flight
mmc_issue_type(mq, req)
This strategy can ensure the consistency of issue_type
before and after executing mmc_blk_mq_complete_rq.
Fixes:
81196976ed94 ("mmc: block: Add blk-mq support")
Cc: stable@vger.kernel.org
Signed-off-by: Yibin Ding <yibin.ding@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230802023023.1318134-1-yunlong.xing@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Yingliang [Mon, 7 Aug 2023 12:44:42 +0000 (20:44 +0800)]
mmc: wbsd: fix double mmc_free_host() in wbsd_init()
commit
d83035433701919ac6db15f7737cbf554c36c1a6 upstream.
mmc_free_host() has already be called in wbsd_free_mmc(),
remove the mmc_free_host() in error path in wbsd_init().
Fixes:
dc5b9b50fc9d ("mmc: wbsd: fix return value check of mmc_add_host()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230807124443.3431366-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sweet Tea Dorminy [Thu, 17 Aug 2023 14:15:56 +0000 (10:15 -0400)]
blk-crypto: dynamically allocate fallback profile
commit
c984ff1423ae9f70b1f28ce811856db0d9c99021 upstream.
blk_crypto_profile_init() calls lockdep_register_key(), which warns and
does not register if the provided memory is a static object.
blk-crypto-fallback currently has a static blk_crypto_profile and calls
blk_crypto_profile_init() thereupon, resulting in the warning and
failure to register.
Fortunately it is simple enough to use a dynamically allocated profile
and make lockdep function correctly.
Fixes:
2fb48d88e77f ("blk-crypto: use dynamic lock class for blk_crypto_profile::lock")
Cc: stable@vger.kernel.org
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230817141615.15387-1-sweettea-kernel@dorminy.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yogesh Hegde [Tue, 18 Jul 2023 16:39:41 +0000 (22:09 +0530)]
arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
commit
ebceec271e552a2b05e47d8ef0597052b1a39449 upstream.
This patch fixes an issue affecting the Wifi/Bluetooth connectivity on
ROCK Pi 4 boards. Commit
f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth
on ROCK Pi 4 boards") introduced a problem with the clock configuration.
Specifically, the clock-names property of the sdio-pwrseq node was not
updated to 'lpo', causing the driver to wait indefinitely for the wrong clock
signal 'ext_clock' instead of the expected one 'lpo'. This prevented the proper
initialization of Wifi/Bluetooth chip on ROCK Pi 4 boards.
To address this, this patch updates the clock-names property of the
sdio-pwrseq node to "lpo" to align with the changes made to the bluetooth node.
This patch has been tested on ROCK Pi 4B.
Fixes:
f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards")
Cc: stable@vger.kernel.org
Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com>
Link: https://lore.kernel.org/r/ZLbATQRjOl09aLAp@zephyrusG14
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hawkins Jiawei [Thu, 10 Aug 2023 11:04:05 +0000 (19:04 +0800)]
virtio-net: Zero max_tx_vq field for VIRTIO_NET_CTRL_MQ_HASH_CONFIG case
commit
2c507ce90e02cd78d00fd4b0fe26c8641873c13f upstream.
Kernel uses `struct virtio_net_ctrl_rss` to save command-specific-data
for both the VIRTIO_NET_CTRL_MQ_HASH_CONFIG and
VIRTIO_NET_CTRL_MQ_RSS_CONFIG commands.
According to the VirtIO standard, "Field reserved MUST contain zeroes.
It is defined to make the structure to match the layout of
virtio_net_rss_config structure, defined in 5.1.6.5.7.".
Yet for the VIRTIO_NET_CTRL_MQ_HASH_CONFIG command case, the `max_tx_vq`
field in struct virtio_net_ctrl_rss, which corresponds to the
`reserved` field in struct virtio_net_hash_config, is not zeroed,
thereby violating the VirtIO standard.
This patch solves this problem by zeroing this field in
virtnet_init_default_rss().
Cc: Andrew Melnychenko <andrew@daynix.com>
Cc: stable@vger.kernel.org
Fixes:
c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <
20230810110405.25558-1-yin31149@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell Harmon via samba-technical [Thu, 10 Aug 2023 07:19:22 +0000 (00:19 -0700)]
cifs: Release folio lock on fscache read hit.
commit
69513dd669e243928f7450893190915a88f84a2b upstream.
Under the current code, when cifs_readpage_worker is called, the call
contract is that the callee should unlock the page. This is documented
in the read_folio section of Documentation/filesystems/vfs.rst as:
> The filesystem should unlock the folio once the read has completed,
> whether it was successful or not.
Without this change, when fscache is in use and cache hit occurs during
a read, the page lock is leaked, producing the following stack on
subsequent reads (via mmap) to the page:
$ cat /proc/3890/task/12864/stack
[<0>] folio_wait_bit_common+0x124/0x350
[<0>] filemap_read_folio+0xad/0xf0
[<0>] filemap_fault+0x8b1/0xab0
[<0>] __do_fault+0x39/0x150
[<0>] do_fault+0x25c/0x3e0
[<0>] __handle_mm_fault+0x6ca/0xc70
[<0>] handle_mm_fault+0xe9/0x350
[<0>] do_user_addr_fault+0x225/0x6c0
[<0>] exc_page_fault+0x84/0x1b0
[<0>] asm_exc_page_fault+0x27/0x30
This requires a reboot to resolve; it is a deadlock.
Note however that the call to cifs_readpage_from_fscache does mark the
page clean, but does not free the folio lock. This happens in
__cifs_readpage_from_fscache on success. Releasing the lock at that
point however is not appropriate as cifs_readahead also calls
cifs_readpage_from_fscache and *does* unconditionally release the lock
after its return. This change therefore effectively makes
cifs_readpage_worker work like cifs_readahead.
Signed-off-by: Russell Harmon <russ@har.mn>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dengxiang [Thu, 3 Aug 2023 02:44:37 +0000 (10:44 +0800)]
ALSA: usb-audio: Add support for Mythware XA001AU capture and playback interfaces.
commit
788449ae57f4273111b779bbcaad552b67f517d5 upstream.
This patch adds a USB quirk for Mythware XA001AU USB interface.
Signed-off-by: dengxiang <dengxiang@nfschina.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230803024437.370069-1-dengxiang@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Fri, 4 Aug 2023 13:15:51 +0000 (16:15 +0300)]
serial: 8250: Fix oops for port->pm on uart_change_pm()
[ Upstream commit
dfe2aeb226fd5e19b0ee795f4f6ed8bc494c1534 ]
Unloading a hardware specific 8250 driver can produce error "Unable to
handle kernel paging request at virtual address" about ten seconds after
unloading the driver. This happens on uart_hangup() calling
uart_change_pm().
Turns out commit
04e82793f068 ("serial: 8250: Reinit port->pm on port
specific driver unbind") was only a partial fix. If the hardware specific
driver has initialized port->pm function, we need to clear port->pm too.
Just reinitializing port->ops does not do this. Otherwise serial8250_pm()
will call port->pm() instead of serial8250_do_pm().
Fixes:
04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230804131553.52927-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandre Ghiti [Fri, 11 Aug 2023 15:06:04 +0000 (17:06 +0200)]
riscv: uaccess: Return the number of bytes effectively not copied
[ Upstream commit
4b05b993900dd3eba0fc83ef5c5ddc7d65d786c6 ]
It was reported that the riscv kernel hangs while executing the test
in [1].
Indeed, the test hangs when trying to write a buffer to a file. The
problem is that the riscv implementation of raw_copy_from_user() does not
return the correct number of bytes not written when an exception happens
and is fixed up, instead it always returns the initial size to copy,
even if some bytes were actually copied.
generic_perform_write() pre-faults the user pages and bails out if nothing
can be written, otherwise it will access the userspace buffer: here the
riscv implementation keeps returning it was not able to copy any byte
though the pre-faulting indicates otherwise. So generic_perform_write()
keeps retrying to access the user memory and ends up in an infinite
loop.
Note that before the commit mentioned in [1] that introduced this
regression, it worked because generic_perform_write() would bail out if
only one byte could not be written.
So fix this by returning the number of bytes effectively not written in
__asm_copy_[to|from]_user() and __clear_user(), as it is expected.
Link: https://lore.kernel.org/linux-riscv/20230309151841.bomov6hq3ybyp42a@debian/
Fixes:
ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code")
Reported-by: Bo YU <tsu.yubo@gmail.com>
Closes: https://lore.kernel.org/linux-riscv/
20230309151841.bomov6hq3ybyp42a@debian/#t
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Closes: https://lore.kernel.org/linux-riscv/ZNOnCakhwIeue3yr@aurel32.net/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Link: https://lore.kernel.org/r/20230811150604.1621784-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kailang Yang [Tue, 15 Aug 2023 07:54:23 +0000 (15:54 +0800)]
ALSA: hda/realtek - Remodified 3k pull low procedure
[ Upstream commit
46cdff2369cbdf8d78081a22526e77bd1323f563 ]
Set spec->en_3kpull_low default to true.
Then fillback ALC236 and ALC257 to false.
Additional note: this addresses a regression caused by the previous
fix
69ea4c9d02b7 ("ALSA: hda/realtek - remove 3k pull low procedure").
The previous workaround was applied too widely without necessity,
which resulted in the pop noise at PM again. This patch corrects the
condition and restores the old behavior for the devices that don't
suffer from the original problem.
Fixes:
69ea4c9d02b7 ("ALSA: hda/realtek - remove 3k pull low procedure")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217732
Link: https://lore.kernel.org/r/01e212a538fc407ca6edd10b81ff7b05@realtek.com
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Thu, 10 Aug 2023 12:31:04 +0000 (22:01 +0930)]
soc: aspeed: socinfo: Add kfree for kstrdup
[ Upstream commit
6e6d847a8ce18ab2fbec4f579f682486a82d2c6b ]
Add kfree() in the later error handling in order to avoid memory leak.
Fixes:
e0218dca5787 ("soc: aspeed: Add soc info driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230707021625.7727-1-jiasheng@iscas.ac.cn
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810123104.231167-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zev Weiss [Thu, 10 Aug 2023 12:29:41 +0000 (21:59 +0930)]
soc: aspeed: uart-routing: Use __sysfs_match_string
[ Upstream commit
e4ad279ae345413d900d791f2f618d0a1cd0d791 ]
The existing use of match_string() caused it to reject 'echo foo' due
to the implicitly appended newline, which was somewhat ergonomically
awkward and inconsistent with typical sysfs behavior. Using the
__sysfs_* variant instead provides more convenient and consistent
linefeed-agnostic behavior.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes:
c6807970c3bc ("soc: aspeed: Add UART routing support")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230628083735.19946-2-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810122941.231085-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Binding [Wed, 9 Aug 2023 14:29:56 +0000 (15:29 +0100)]
ALSA: hda/realtek: Add quirks for HP G11 Laptops
[ Upstream commit
fb8cce69e5e56eedb35fc4d77b2f099860965859 ]
These HP G11 laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using SPI or I2C with External Boost.
Laptop
103c8c26 has been removed as this has been replaced
by this new series of laptops.
Fixes:
3e10f6ca76c4 ("ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230809142957.675933-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jerome Brunet [Wed, 9 Aug 2023 17:19:31 +0000 (19:19 +0200)]
ASoC: meson: axg-tdm-formatter: fix channel slot allocation
[ Upstream commit
c1f848f12103920ca165758aedb1c10904e193e1 ]
When the tdm lane mask is computed, the driver currently fills the 1st lane
before moving on to the next. If the stream has less channels than the
lanes can accommodate, slots will be disabled on the last lanes.
Unfortunately, the HW distribute channels in a different way. It distribute
channels in pair on each lanes before moving on the next slots.
This difference leads to problems if a device has an interface with more
than 1 lane and with more than 2 slots per lane.
For example: a playback interface with 2 lanes and 4 slots each (total 8
slots - zero based numbering)
- Playing a 8ch stream:
- All slots activated by the driver
- channel #2 will be played on lane #1 - slot #0 following HW placement
- Playing a 4ch stream:
- Lane #1 disabled by the driver
- channel #2 will be played on lane #0 - slot #2
This behaviour is obviously not desirable.
Change the way slots are activated on the TDM lanes to follow what the HW
does and make sure each channel always get mapped to the same slot/lane.
Fixes:
1a11d88f499c ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Shurong [Tue, 1 Aug 2023 15:59:11 +0000 (23:59 +0800)]
ASoC: rt5665: add missed regulator_bulk_disable
[ Upstream commit
c163108e706909570f8aa9aa5bcf6806e2b4c98c ]
The driver forgets to call regulator_bulk_disable()
Add the missed call to fix it.
Fixes:
33ada14a26c8 ("ASoC: add rt5665 codec driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_A560D01E3E0A00A85A12F137E4B5205B3508@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Stein [Fri, 28 Jul 2023 08:34:35 +0000 (10:34 +0200)]
arm64: dts: imx93: Fix anatop node size
[ Upstream commit
78e869dd8b2ba19765ac9b05cdea3e432d1dc188 ]
Although the memory map of i.MX93 reference manual rev. 2 claims that
analog top has start address of 0x44480000 and end address of 0x4448ffff,
this overlaps with TMU memory area starting at 0x44482000, as stated in
section 73.6.1.
As PLL configuration registers start at addresses up to 0x44481400, as used
by clk-imx93, reduce the anatop size to 0x2000, so exclude the TMU area
but keep all PLL registers inside.
Fixes:
ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaolei Wang [Wed, 26 Jul 2023 07:57:47 +0000 (15:57 +0800)]
ARM: dts: imx: Set default tuning step for imx6sx usdhc
[ Upstream commit
0a2b96e42a0284c4fc03022236f656a085ca714a ]
If the tuning step is not set, the tuning step is set to 1.
For some sd cards, the following Tuning timeout will occur.
Tuning failed, falling back to fixed sampling clock
So set the default tuning step. This refers to the NXP vendor's
commit below:
https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
arch/arm/boot/dts/imx6sx.dtsi#L1108-L1109
Fixes:
1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Tue, 25 Jul 2023 23:26:28 +0000 (20:26 -0300)]
arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
[ Upstream commit
f02b53375e8f14b4c27a14f6e4fb6e89914fdc29 ]
The CSI1 PHY reference clock is limited to 125 MHz according to:
i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020
Table 5-1. Clock Root Table (continued) / page 307
Slice Index n = 123 .
Currently the IMX8MM_CLK_CSI1_PHY_REF clock is configured to be
fed directly from 1 GHz PLL2 , which overclocks them. Instead, drop
the configuration altogether, which defaults the clock to 24 MHz REF
clock input, which for the PHY reference clock is just fine.
Based on a patch from Marek Vasut for the imx8mn.
Fixes:
e523b7c54c05 ("arm64: dts: imx8mm: Add CSI nodes")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrej Picej [Wed, 19 Jul 2023 11:43:26 +0000 (13:43 +0200)]
ARM: dts: imx6: phytec: fix RTC interrupt level
[ Upstream commit
762b700982a1e0f562184363f19860c3b9bdd0bf ]
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:
f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Stefan Riedmüller <s.riedmueller@phytec.de>
Fixes:
800d595151bb ("ARM: dts: imx6: Add initial support for phyBOARD-Mira")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Fri, 25 Nov 2022 14:42:22 +0000 (15:42 +0100)]
ARM: dts: imx: align LED node names with dtschema
[ Upstream commit
4b0d1f2738899dbcc7a026d826373530019aa31b ]
The node names should be generic and DT schema expects certain pattern:
imx50-kobo-aura.dtb: gpio-leds: 'on' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
imx6dl-yapp4-draco.dtb: led-controller@30: 'chan@0', 'chan@1', 'chan@2' do not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of:
762b700982a1 ("ARM: dts: imx6: phytec: fix RTC interrupt level")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christopher Obbard [Wed, 5 Jul 2023 14:42:55 +0000 (15:42 +0100)]
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
[ Upstream commit
2bd1d2dd808c60532283e9cf05110bf1bf2f9079 ]
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
[ 289.171014] mmc1: running CQE recovery
[ 290.048972] mmc1: running CQE recovery
[ 290.054834] mmc1: running CQE recovery
[ 290.060817] mmc1: running CQE recovery
[ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
[ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
[ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
[ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
[ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
[ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
[ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
[ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
[ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
[ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
[ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
[ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
Fixes:
246450344dad ("arm64: dts: rockchip: rk3399: Radxa ROCK 4C+")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230705144255.115299-3-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christopher Obbard [Wed, 5 Jul 2023 14:42:54 +0000 (15:42 +0100)]
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
[ Upstream commit
cee572756aa2cb46e959e9797ad4b730b78a050b ]
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
[ 289.171014] mmc1: running CQE recovery
[ 290.048972] mmc1: running CQE recovery
[ 290.054834] mmc1: running CQE recovery
[ 290.060817] mmc1: running CQE recovery
[ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
[ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
[ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
[ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
[ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
[ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
[ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
[ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
[ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
[ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
[ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
[ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
While we are here, set the eMMC maximum clock frequency to 1.5MHz to
follow the ROCK 4C+.
Fixes:
1b5715c602fd ("arm64: dts: rockchip: add ROCK Pi 4 DTS support")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-By: Folker Schwesinger <dev@folker-schwesinger.de>
Link: https://lore.kernel.org/r/20230705144255.115299-2-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Tue, 13 Jun 2023 13:12:24 +0000 (16:12 +0300)]
arm64: dts: qcom: qrb5165-rb5: fix thermal zone conflict
[ Upstream commit
798f1df86e5709b7b6aedf493cc04c7fedbf544a ]
The commit
3a786086c6f8 ("arm64: dts: qcom: Add missing "-thermal"
suffix for thermal zones") renamed the thermal zone in the pm8150l.dtsi
file to comply with the schema. However this resulted in a clash with
the RB5 board file, which already contained the pm8150l-thermal zone for
the on-board sensor. This resulted in the board file definition
overriding the thermal zone defined in the PMIC include file (and thus
the on-die PMIC temp alarm was not probing at all).
Rename the thermal zone in qcom/qrb5165-rb5.dts to remove this override.
Fixes:
3a786086c6f8 ("arm64: dts: qcom: Add missing "-thermal" suffix for thermal zones")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230613131224.666668-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Wed, 14 Jun 2023 07:18:23 +0000 (10:18 +0300)]
bus: ti-sysc: Flush posted write on enable before reset
[ Upstream commit
34539b442b3bc7d5bf10164750302b60b91f18a7 ]
The am335x devices started producing boot errors for resetting musb module
in because of subtle timing changes:
Unhandled fault: external abort on non-linefetch (0x1008)
...
sysc_poll_reset_sysconfig from sysc_reset+0x109/0x12
sysc_reset from sysc_probe+0xa99/0xeb0
...
The fix is to flush posted write after enable before reset during
probe. Note that some devices also need to specify the delay after enable
with ti,sysc-delay-us, but this is not needed for musb on am335x based on
my tests.
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://storage.kernelci.org/next/master/next-
20230614/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/lab-cip/baseline-beaglebone-black.html
Fixes:
596e7955692b ("bus: ti-sysc: Add support for software reset")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marcin Szycik [Wed, 16 Aug 2023 19:34:05 +0000 (12:34 -0700)]
ice: Block switchdev mode when ADQ is active and vice versa
[ Upstream commit
43d00e102d9ecbe2635d7e3f2e14d2e90183d6af ]
ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.
To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.
Fixes:
fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manish Chopra [Wed, 16 Aug 2023 15:07:11 +0000 (20:37 +0530)]
qede: fix firmware halt over suspend and resume
[ Upstream commit
2eb9625a3a32251ecea470cd576659a3a03b4e59 ]
While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.
Without this fix device/firmware does not recover unless system
is power cycled.
Fixes:
2950219d87b0 ("qede: Add basic network device support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Wed, 16 Aug 2023 14:21:58 +0000 (14:21 +0000)]
net: do not allow gso_size to be set to GSO_BY_FRAGS
[ Upstream commit
b616be6b97688f2f2bd7c4a47ab32f27f94fb2a9 ]
One missing check in virtio_net_hdr_to_skb() allowed
syzbot to crash kernels again [1]
Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff),
because this magic value is used by the kernel.
[1]
general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-
20230809-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500
Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01
RSP: 0018:
ffffc90003d3f1c8 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
000000000001fffe RCX:
0000000000000000
RDX:
000000000000000e RSI:
ffffffff882a3115 RDI:
0000000000000070
RBP:
ffffc90003d3f378 R08:
0000000000000005 R09:
000000000000ffff
R10:
000000000000ffff R11:
5ee4a93e456187d6 R12:
000000000001ffc6
R13:
dffffc0000000000 R14:
0000000000000008 R15:
000000000000ffff
FS:
00005555563f2380(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020020000 CR3:
000000001626d000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625
__dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:727 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:750
____sys_sendmsg+0x6ac/0x940 net/socket.c:2496
___sys_sendmsg+0x135/0x1d0 net/socket.c:2550
__sys_sendmsg+0x117/0x1e0 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff27cdb34d9
Fixes:
3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Abel Wu [Wed, 16 Aug 2023 09:12:22 +0000 (17:12 +0800)]
sock: Fix misuse of sk_under_memory_pressure()
[ Upstream commit
2d0c88e84e483982067a82073f6125490ddf3614 ]
The status of global socket memory pressure is updated when:
a) __sk_mem_raise_allocated():
enter: sk_memory_allocated(sk) > sysctl_mem[1]
leave: sk_memory_allocated(sk) <= sysctl_mem[0]
b) __sk_mem_reduce_allocated():
leave: sk_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sysctl_mem[0]
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Fixes:
e1aab161e013 ("socket: initial cgroup code.")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Cree [Tue, 15 Aug 2023 15:57:27 +0000 (16:57 +0100)]
sfc: don't unregister flow_indr if it was never registered
[ Upstream commit
fa165e1949976704500a442faeef8d9596faee76 ]
In efx_init_tc(), move the setting of efx->tc->up after the
flow_indr_dev_register() call, so that if it fails, efx_fini_tc()
won't call flow_indr_dev_unregister().
Fixes:
5b2e12d51bd8 ("sfc: bind indirect blocks for TC offload on EF100")
Suggested-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/a81284d7013aba74005277bd81104e4cfbea3f6f.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alfred Lee [Tue, 15 Aug 2023 00:13:23 +0000 (17:13 -0700)]
net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
[ Upstream commit
23d775f12dcd23d052a4927195f15e970e27ab26 ]
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes:
a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: Alfred Lee <l00g33k@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Staikov [Wed, 2 Aug 2023 07:47:32 +0000 (09:47 +0200)]
i40e: fix misleading debug logs
[ Upstream commit
2f2beb8874cb0844e84ad26e990f05f4f13ff63f ]
Change "write" into the actual "read" word.
Change parameters description.
Fixes:
7073f46e443e ("i40e: Add AQ commands for NVM Update for X722")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Piotr Gardocki [Mon, 7 Aug 2023 14:46:04 +0000 (16:46 +0200)]
iavf: fix FDIR rule fields masks validation
[ Upstream commit
751969e5b1196821ef78f0aa664a8a97c92c9057 ]
Return an error if a field's mask is neither full nor empty. When a mask
is only partial the field is not being used for rule programming but it
gives a wrong impression it is used. Fix by returning an error on any
partial mask to make it clear they are not supported.
The ip_ver assignment is moved earlier in code to allow using it in
iavf_validate_fdir_fltr_masks.
Fixes:
527691bf0682 ("iavf: Support IPv4 Flow Director filters")
Fixes:
e90cbc257a6f ("iavf: Support IPv6 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Kicinski [Mon, 14 Aug 2023 20:38:40 +0000 (13:38 -0700)]
net: openvswitch: reject negative ifindex
[ Upstream commit
a552bfa16bab4ce901ee721346a28c4e483f4066 ]
Recent changes in net-next (commit
759ab1edb56c ("net: store netdevs
in an xarray")) refactored the handling of pre-assigned ifindexes
and let syzbot surface a latent problem in ovs. ovs does not validate
ifindex, making it possible to create netdev ports with negative
ifindex values. It's easy to repro with YNL:
$ ./cli.py --spec netlink/specs/ovs_datapath.yaml \
--do new \
--json '{"upcall-pid": 1, "name":"my-dp"}'
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "
00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":
4294901760,"type":2}'
$ ip link show
-65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff
...
Validate the inputs. Now the second command correctly returns:
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "
00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":
4294901760,"type":2}'
lib.ynl.NlError: Netlink error: Numerical result out of range
nl_len = 108 (92) nl_flags = 0x300 nl_type = 2
error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'}
Accept 0 since it used to be silently ignored.
Fixes:
54c4ef34c4b6 ("openvswitch: allow specifying ifindex of new interfaces")
Reported-by: syzbot+7456b5dcf65111553320@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230814203840.2908710-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ziyang Xuan [Mon, 14 Aug 2023 03:23:01 +0000 (11:23 +0800)]
team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
[ Upstream commit
dafcbce07136d799edc4c67f04f9fd69ff1eac1f ]
Similar to commit
01f4fd270870 ("bonding: Fix incorrect deletion of
ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info)
in unregister_vlan_dev() with the following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add team1 type team
# ip netns exec ns1 ip link add team_slave type veth peer veth2
# ip netns exec ns1 ip link set team_slave master team1
# ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set team_slave nomaster
# ip netns del ns1
Add S-VLAN tag related features support to team driver. So the team driver
will always propagate the VLAN info to its slaves.
Fixes:
8ad227ff89a7 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Justin Chen [Sun, 13 Aug 2023 04:41:47 +0000 (21:41 -0700)]
net: phy: broadcom: stub c45 read/write for 54810
[ Upstream commit
096516d092d54604d590827d05b1022c8f326639 ]
The 54810 does not support c45. The mmd_phy_indirect accesses return
arbirtary values leading to odd behavior like saying it supports EEE
when it doesn't. We also see that reading/writing these non-existent
MMD registers leads to phy instability in some cases.
Fixes:
b14995ac2527 ("net: phy: broadcom: Add BCM54810 PHY entry")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/1691901708-28650-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Tue, 15 Aug 2023 13:39:02 +0000 (15:39 +0200)]
netfilter: nft_dynset: disallow object maps
[ Upstream commit
23185c6aed1ffb8fc44087880ba2767aba493779 ]
Do not allow to insert elements from datapath to objects maps.
Fixes:
8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sishuai Gong [Thu, 10 Aug 2023 19:12:42 +0000 (15:12 -0400)]
ipvs: fix racy memcpy in proc_do_sync_threshold
[ Upstream commit
5310760af1d4fbea1452bfc77db5f9a680f7ae47 ]
When two threads run proc_do_sync_threshold() in parallel,
data races could happen between the two memcpy():
Thread-1 Thread-2
memcpy(val, valp, sizeof(val));
memcpy(valp, val, sizeof(val));
This race might mess up the (struct ctl_table *) table->data,
so we add a mutex lock to serialize them.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/B6988E90-0A1E-4B85-BF26-2DAF6D482433@gmail.com/
Signed-off-by: Sishuai Gong <sishuai.system@gmail.com>
Acked-by: Simon Horman <horms@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Sat, 12 Aug 2023 11:05:16 +0000 (13:05 +0200)]
netfilter: nf_tables: deactivate catchall elements in next generation
[ Upstream commit
90e5b3462efa37b8bba82d7c4e63683856e188af ]
When flushing, individual set elements are disabled in the next
generation via the ->flush callback.
Catchall elements are not disabled. This is incorrect and may lead to
double-deactivations of catchall elements which then results in memory
leaks:
WARNING: CPU: 1 PID: 3300 at include/net/netfilter/nf_tables.h:1172 nft_map_deactivate+0x549/0x730
CPU: 1 PID: 3300 Comm: nft Not tainted 6.5.0-rc5+ #60
RIP: 0010:nft_map_deactivate+0x549/0x730
[..]
? nft_map_deactivate+0x549/0x730
nf_tables_delset+0xb66/0xeb0
(the warn is due to nft_use_dec() detecting underflow).
Fixes:
aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Tue, 8 Aug 2023 18:40:17 +0000 (20:40 +0200)]
netfilter: nf_tables: fix false-positive lockdep splat
[ Upstream commit
b9f052dc68f69dac89fe1e24693354c033daa091 ]
->abort invocation may cause splat on debug kernels:
WARNING: suspicious RCU usage
net/netfilter/nft_set_pipapo.c:1697 suspicious rcu_dereference_check() usage!
[..]
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by nft/133554: [..] (nft_net->commit_mutex){+.+.}-{3:3}, at: nf_tables_valid_genid
[..]
lockdep_rcu_suspicious+0x1ad/0x260
nft_pipapo_abort+0x145/0x180
__nf_tables_abort+0x5359/0x63d0
nf_tables_abort+0x24/0x40
nfnetlink_rcv+0x1a0a/0x22c0
netlink_unicast+0x73c/0x900
netlink_sendmsg+0x7f0/0xc20
____sys_sendmsg+0x48d/0x760
Transaction mutex is held, so parallel updates are not possible.
Switch to _protected and check mutex is held for lockdep enabled builds.
Fixes:
212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Schmidt [Thu, 10 Aug 2023 15:01:12 +0000 (17:01 +0200)]
octeon_ep: cancel tx_timeout_task later in remove sequence
[ Upstream commit
28458c80006bb4e993a09fc094094a8578cad292 ]
tx_timeout_task is canceled too early when removing the driver. Nothing
prevents .ndo_tx_timeout from triggering and queuing the work again.
Better cancel it after the netdev is unregistered.
It's harmless for octep_tx_timeout_task to run in the window between the
unregistration and cancelation, because it checks netif_running.
Fixes:
862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-3-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Radhey Shyam Pandey [Mon, 7 Aug 2023 13:14:51 +0000 (18:44 +0530)]
net: macb: In ZynqMP resume always configure PS GTR for non-wakeup source
[ Upstream commit
6c461e394d11a981c662cc16cebfb05b602e23ba ]
On Zynq UltraScale+ MPSoC ubuntu platform when systemctl issues suspend,
network manager bring down the interface and goes into suspend. When it
wakes up it again enables the interface.
This leads to xilinx-psgtr "PLL lock timeout" on interface bringup, as
the power management controller power down the entire FPD (including
SERDES) if none of the FPD devices are in use and serdes is not
initialized on resume.
$ sudo rtcwake -m no -s 120 -v
$ sudo systemctl suspend <this does ifconfig eth1 down>
$ ifconfig eth1 up
xilinx-psgtr
fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-
fd400000.phy.0: phy poweron failed --> -110
macb driver is called in this way:
1. macb_close: Stop network interface. In this function, it
reset MACB IP and disables PHY and network interface.
2. macb_suspend: It is called in kernel suspend flow. But because
network interface has been disabled(netif_running(ndev) is
false), it does nothing and returns directly;
3. System goes into suspend state. Some time later, system is
waken up by RTC wakeup device;
4. macb_resume: It does nothing because network interface has
been disabled;
5. macb_open: It is called to enable network interface again. ethernet
interface is initialized in this API but serdes which is power-off
by PMUFW during FPD-off suspend is not initialized again and so
we hit GT PLL lock issue on open.
To resolve this PLL timeout issue always do PS GTR initialization
when ethernet device is configured as non-wakeup source.
Fixes:
f22bd29ba19a ("net: macb: Fix ZynqMP SGMII non-wakeup source resume failure")
Fixes:
8b73fa3ae02b ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1691414091-2260697-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luca Ceresoli [Fri, 4 Aug 2023 15:12:39 +0000 (17:12 +0200)]
drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs
[ Upstream commit
e8470c0a7bcaa82f78ad34282d662dd7bd9630c2 ]
Commit
03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4
panel") added support for this panel model, but the timings it implements
are very different from what the datasheet describes. I checked both the
G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they
all have the same timings: for example the LVDS clock typical value is 74.4
MHz, not 66.7 MHz as implemented.
Replace the timings with the ones from the documentation. These timings
have been tested and the clock frequencies verified with an oscilloscope to
ensure they are correct.
Also use struct display_timing instead of struct drm_display_mode in order
to also specify the minimum and maximum values.
[0] https://embedded.avnet.com/product/g121ean01-0/
[1] https://embedded.avnet.com/product/g121ean01-4/
Fixes:
03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Petr Machata [Fri, 11 Aug 2023 15:59:27 +0000 (17:59 +0200)]
selftests: mirror_gre_changes: Tighten up the TTL test match
[ Upstream commit
855067defa36b1f9effad8c219d9a85b655cf500 ]
This test verifies whether the encapsulated packets have the correct
configured TTL. It does so by sending ICMP packets through the test
topology and mirroring them to a gretap netdevice. On a busy host
however, more than just the test ICMP packets may end up flowing
through the topology, get mirrored, and counted. This leads to
potential spurious failures as the test observes much more mirrored
packets than the sent test packets, and assumes a bug.
Fix this by tightening up the mirror action match. Change it from
matchall to a flower classifier matching on ICMP packets specifically.
Fixes:
45315673e0c5 ("selftests: forwarding: Test changes in mirror-to-gretap")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King (Oracle) [Fri, 11 Aug 2023 10:26:30 +0000 (11:26 +0100)]
net: phy: fix IRQ-based wake-on-lan over hibernate / power off
[ Upstream commit
cc941e548bffc01b5816b4edc5cb432a137a58b3 ]
Uwe reports:
"Most PHYs signal WoL using an interrupt. So disabling interrupts [at
shutdown] breaks WoL at least on PHYs covered by the marvell driver."
Discussing with Ioana, the problem which was trying to be solved was:
"The board in question is a LS1021ATSN which has two AR8031 PHYs that
share an interrupt line. In case only one of the PHYs is probed and
there are pending interrupts on the PHY#2 an IRQ storm will happen
since there is no entity to clear the interrupt from PHY#2's registers.
PHY#1's driver will get stuck in .handle_interrupt() indefinitely."
Further confirmation that "the two AR8031 PHYs are on the same MDIO
bus."
With WoL using interrupts to wake the system, in such a case, the
system will begin booting with an asserted interrupt. Thus, we need to
cope with an interrupt asserted during boot.
Solve this instead by disabling interrupts during PHY probe. This will
ensure in Ioana's situation that both PHYs of the same type sharing an
interrupt line on a common MDIO bus will have their interrupt outputs
disabled when the driver probes the device, but before we hook in any
interrupt handlers - thus avoiding the interrupt storm.
A better fix would be for platform firmware to disable the interrupting
devices at source during boot, before control is handed to the kernel.
Fixes:
e2f016cf7751 ("net: phy: add a shutdown procedure")
Link:
20230804071757.383971-1-u.kleine-koenig@pengutronix.de
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiang Yang [Thu, 10 Aug 2023 14:06:39 +0000 (22:06 +0800)]
net: pcs: Add missing put_device call in miic_create
[ Upstream commit
829c6524d6729d05a82575dbcc16f99be5ee843d ]
The reference of pdev->dev is taken by of_find_device_by_node, so
it should be released when not need anymore.
Fixes:
7dc54d3b8d91 ("net: pcs: add Renesas MII converter driver")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Wang [Thu, 10 Aug 2023 03:12:56 +0000 (23:12 -0400)]
virtio-net: set queues after driver_ok
[ Upstream commit
51b813176f098ff61bd2833f627f5319ead098a5 ]
Commit
25266128fe16 ("virtio-net: fix race between set queues and
probe") tries to fix the race between set queues and probe by calling
_virtnet_set_queues() before DRIVER_OK is set. This violates virtio
spec. Fixing this by setting queues after virtio_device_ready().
Note that rtnl needs to be held for userspace requests to change the
number of queues. So we are serialized in this way.
Fixes:
25266128fe16 ("virtio-net: fix race between set queues and probe")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurent Vivier [Fri, 27 Jan 2023 20:45:00 +0000 (21:45 +0100)]
virtio_net: notify MAC address change on device initialization
[ Upstream commit
9f62d221a4b0aa6a8d2a18053a0ca349c025297c ]
In virtnet_probe(), if the device doesn't provide a MAC address the
driver assigns a random one.
As we modify the MAC address we need to notify the device to allow it
to update all the related information.
The problem can be seen with vDPA and mlx5_vdpa driver as it doesn't
assign a MAC address by default. The virtio_net device uses a random
MAC address (we can see it with "ip link"), but we can't ping a net
namespace from another one using the virtio-vdpa device because the
new MAC address has not been provided to the hardware:
RX packets are dropped since they don't go through the receive filters,
TX packets go through unaffected.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of:
51b813176f09 ("virtio-net: set queues after driver_ok")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lin Ma [Sun, 23 Jul 2023 07:41:10 +0000 (15:41 +0800)]
xfrm: add forgotten nla_policy for XFRMA_MTIMER_THRESH
[ Upstream commit
5e2424708da7207087934c5c75211e8584d553a0 ]
The previous commit
4e484b3e969b ("xfrm: rate limit SA mapping change
message to user space") added one additional attribute named
XFRMA_MTIMER_THRESH and described its type at compat_policy
(net/xfrm/xfrm_compat.c).
However, the author forgot to also describe the nla_policy at
xfrma_policy (net/xfrm/xfrm_user.c). Hence, this suppose NLA_U32 (4
bytes) value can be faked as empty (0 bytes) by a malicious user, which
leads to 4 bytes overflow read and heap information leak when parsing
nlattrs.
To exploit this, one malicious user can spray the SLUB objects and then
leverage this 4 bytes OOB read to leak the heap data into
x->mapping_maxage (see xfrm_update_ae_params(...)), and leak it to
userspace via copy_to_user_state_extra(...).
The above bug is assigned CVE-2023-3773. To fix it, this commit just
completes the nla_policy description for XFRMA_MTIMER_THRESH, which
enforces the length check and avoids such OOB read.
Fixes:
4e484b3e969b ("xfrm: rate limit SA mapping change message to user space")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lin Ma [Fri, 21 Jul 2023 14:51:03 +0000 (22:51 +0800)]
xfrm: add NULL check in xfrm_update_ae_params
[ Upstream commit
00374d9b6d9f932802b55181be9831aa948e5b7c ]
Normally, x->replay_esn and x->preplay_esn should be allocated at
xfrm_alloc_replay_state_esn(...) in xfrm_state_construct(...), hence the
xfrm_update_ae_params(...) is okay to update them. However, the current
implementation of xfrm_new_ae(...) allows a malicious user to directly
dereference a NULL pointer and crash the kernel like below.
BUG: kernel NULL pointer dereference, address:
0000000000000000
PGD 8253067 P4D 8253067 PUD 8e0e067 PMD 0
Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 98 Comm: poc.npd Not tainted 6.4.0-rc7-00072-gdad9774deaf1 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.o4
RIP: 0010:memcpy_orig+0xad/0x140
Code: e8 4c 89 5f e0 48 8d 7f e0 73 d2 83 c2 20 48 29 d6 48 29 d7 83 fa 10 72 34 4c 8b 06 4c 8b 4e 08 c
RSP: 0018:
ffff888008f57658 EFLAGS:
00000202
RAX:
0000000000000000 RBX:
ffff888008bd0000 RCX:
ffffffff8238e571
RDX:
0000000000000018 RSI:
ffff888007f64844 RDI:
0000000000000000
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff888008f57818
R13:
ffff888007f64aa4 R14:
0000000000000000 R15:
0000000000000000
FS:
00000000014013c0(0000) GS:
ffff88806d600000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
00000000054d8000 CR4:
00000000000006f0
Call Trace:
<TASK>
? __die+0x1f/0x70
? page_fault_oops+0x1e8/0x500
? __pfx_is_prefetch.constprop.0+0x10/0x10
? __pfx_page_fault_oops+0x10/0x10
? _raw_spin_unlock_irqrestore+0x11/0x40
? fixup_exception+0x36/0x460
? _raw_spin_unlock_irqrestore+0x11/0x40
? exc_page_fault+0x5e/0xc0
? asm_exc_page_fault+0x26/0x30
? xfrm_update_ae_params+0xd1/0x260
? memcpy_orig+0xad/0x140
? __pfx__raw_spin_lock_bh+0x10/0x10
xfrm_update_ae_params+0xe7/0x260
xfrm_new_ae+0x298/0x4e0
? __pfx_xfrm_new_ae+0x10/0x10
? __pfx_xfrm_new_ae+0x10/0x10
xfrm_user_rcv_msg+0x25a/0x410
? __pfx_xfrm_user_rcv_msg+0x10/0x10
? __alloc_skb+0xcf/0x210
? stack_trace_save+0x90/0xd0
? filter_irq_stacks+0x1c/0x70
? __stack_depot_save+0x39/0x4e0
? __kasan_slab_free+0x10a/0x190
? kmem_cache_free+0x9c/0x340
? netlink_recvmsg+0x23c/0x660
? sock_recvmsg+0xeb/0xf0
? __sys_recvfrom+0x13c/0x1f0
? __x64_sys_recvfrom+0x71/0x90
? do_syscall_64+0x3f/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
? copyout+0x3e/0x50
netlink_rcv_skb+0xd6/0x210
? __pfx_xfrm_user_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? __pfx_sock_has_perm+0x10/0x10
? mutex_lock+0x8d/0xe0
? __pfx_mutex_lock+0x10/0x10
xfrm_netlink_rcv+0x44/0x50
netlink_unicast+0x36f/0x4c0
? __pfx_netlink_unicast+0x10/0x10
? netlink_recvmsg+0x500/0x660
netlink_sendmsg+0x3b7/0x700
This Null-ptr-deref bug is assigned CVE-2023-3772. And this commit
adds additional NULL check in xfrm_update_ae_params to fix the NPD.
Fixes:
d8647b79c3b7 ("xfrm: Add user interface for esn and big anti-replay windows")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhengchao Shao [Mon, 10 Jul 2023 09:40:53 +0000 (17:40 +0800)]
ip_vti: fix potential slab-use-after-free in decode_session6
[ Upstream commit
6018a266279b1a75143c7c0804dd08a5fc4c3e0b ]
When ip_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ip_vti device sends IPv6 packets.
As commit
f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes:
f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhengchao Shao [Mon, 10 Jul 2023 09:40:52 +0000 (17:40 +0800)]
ip6_vti: fix slab-use-after-free in decode_session6
[ Upstream commit
9fd41f1ba638938c9a1195d09bc6fa3be2712f25 ]
When ipv6_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ipv6_vti device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr
ffff88802e08edc2 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-
20230707-00001-g84e2cad7f979 #410
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
vti6_tnl_xmit+0x3e6/0x1ee0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
Allocated by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
netlink_sendmsg+0x9b1/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
____kasan_slab_free+0x160/0x1c0
slab_free_freelist_hook+0x11b/0x220
kmem_cache_free+0xf0/0x490
skb_free_head+0x17f/0x1b0
skb_release_data+0x59c/0x850
consume_skb+0xd2/0x170
netlink_unicast+0x54f/0x7f0
netlink_sendmsg+0x926/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at
ffff88802e08ed00
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 194 bytes inside of
freed 640-byte region [
ffff88802e08ed00,
ffff88802e08ef80)
As commit
f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes:
f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhengchao Shao [Mon, 10 Jul 2023 09:40:51 +0000 (17:40 +0800)]
xfrm: fix slab-use-after-free in decode_session6
[ Upstream commit
53223f2ed1ef5c90dad814daaaefea4e68a933c8 ]
When the xfrm device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when the xfrm device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr
ffff8881111458ef by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-
20230707 #409
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
xfrmi_xmit+0x173/0x1ca0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:intel_idle_hlt+0x23/0x30
Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4
RSP: 0018:
ffffc90000197d78 EFLAGS:
00000246
RAX:
00000000000a83c3 RBX:
ffffe8ffffd09c50 RCX:
ffffffff8a22d8e5
RDX:
0000000000000001 RSI:
ffffffff8d3f8080 RDI:
ffffe8ffffd09c50
RBP:
ffffffff8d3f8080 R08:
0000000000000001 R09:
ffffed1026ba6d9d
R10:
ffff888135d36ceb R11:
0000000000000001 R12:
0000000000000001
R13:
ffffffff8d3f8100 R14:
0000000000000001 R15:
0000000000000000
cpuidle_enter_state+0xd3/0x6f0
cpuidle_enter+0x4e/0xa0
do_idle+0x2fe/0x3c0
cpu_startup_entry+0x18/0x20
start_secondary+0x200/0x290
secondary_startup_64_no_verify+0x167/0x16b
</TASK>
Allocated by task 939:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
inet6_ifa_notify+0x118/0x230
__ipv6_ifa_notify+0x177/0xbe0
addrconf_dad_completed+0x133/0xe00
addrconf_dad_work+0x764/0x1390
process_one_work+0xa32/0x16f0
worker_thread+0x67d/0x10c0
kthread+0x344/0x440
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at
ffff888111145800
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 239 bytes inside of
freed 640-byte region [
ffff888111145800,
ffff888111145a80)
As commit
f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes:
f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lin Ma [Fri, 30 Jun 2023 08:19:11 +0000 (16:19 +0800)]
net: xfrm: Amend XFRMA_SEC_CTX nla_policy structure
[ Upstream commit
d1e0e61d617ba17aa516db707aa871387566bbf7 ]
According to all consumers code of attrs[XFRMA_SEC_CTX], like
* verify_sec_ctx_len(), convert to xfrm_user_sec_ctx*
* xfrm_state_construct(), call security_xfrm_state_alloc whose prototype
is int security_xfrm_state_alloc(.., struct xfrm_user_sec_ctx *sec_ctx);
* copy_from_user_sec_ctx(), convert to xfrm_user_sec_ctx *
...
It seems that the expected parsing result for XFRMA_SEC_CTX should be
structure xfrm_user_sec_ctx, and the current xfrm_sec_ctx is confusing
and misleading (Luckily, they happen to have same size 8 bytes).
This commit amend the policy structure to xfrm_user_sec_ctx to avoid
ambiguity.
Fixes:
cf5cb79f6946 ("[XFRM] netlink: Establish an attribute policy")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lin Ma [Tue, 27 Jun 2023 03:39:54 +0000 (11:39 +0800)]
net: af_key: fix sadb_x_filter validation
[ Upstream commit
75065a8929069bc93181848818e23f147a73f83a ]
When running xfrm_state_walk_init(), the xfrm_address_filter being used
is okay to have a splen/dplen that equals to sizeof(xfrm_address_t)<<3.
This commit replaces >= to > to make sure the boundary checking is
correct.
Fixes:
37bd22420f85 ("af_key: pfkey_dump needs parameter validation")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lin Ma [Tue, 27 Jun 2023 03:31:38 +0000 (11:31 +0800)]
net: xfrm: Fix xfrm_address_filter OOB read
[ Upstream commit
dfa73c17d55b921e1d4e154976de35317e43a93a ]
We found below OOB crash:
[ 44.211730] ==================================================================
[ 44.212045] BUG: KASAN: slab-out-of-bounds in memcmp+0x8b/0xb0
[ 44.212045] Read of size 8 at addr
ffff88800870f320 by task poc.xfrm/97
[ 44.212045]
[ 44.212045] CPU: 0 PID: 97 Comm: poc.xfrm Not tainted 6.4.0-rc7-00072-gdad9774deaf1-dirty #4
[ 44.212045] Call Trace:
[ 44.212045] <TASK>
[ 44.212045] dump_stack_lvl+0x37/0x50
[ 44.212045] print_report+0xcc/0x620
[ 44.212045] ? __virt_addr_valid+0xf3/0x170
[ 44.212045] ? memcmp+0x8b/0xb0
[ 44.212045] kasan_report+0xb2/0xe0
[ 44.212045] ? memcmp+0x8b/0xb0
[ 44.212045] kasan_check_range+0x39/0x1c0
[ 44.212045] memcmp+0x8b/0xb0
[ 44.212045] xfrm_state_walk+0x21c/0x420
[ 44.212045] ? __pfx_dump_one_state+0x10/0x10
[ 44.212045] xfrm_dump_sa+0x1e2/0x290
[ 44.212045] ? __pfx_xfrm_dump_sa+0x10/0x10
[ 44.212045] ? __kernel_text_address+0xd/0x40
[ 44.212045] ? kasan_unpoison+0x27/0x60
[ 44.212045] ? mutex_lock+0x60/0xe0
[ 44.212045] ? __pfx_mutex_lock+0x10/0x10
[ 44.212045] ? kasan_save_stack+0x22/0x50
[ 44.212045] netlink_dump+0x322/0x6c0
[ 44.212045] ? __pfx_netlink_dump+0x10/0x10
[ 44.212045] ? mutex_unlock+0x7f/0xd0
[ 44.212045] ? __pfx_mutex_unlock+0x10/0x10
[ 44.212045] __netlink_dump_start+0x353/0x430
[ 44.212045] xfrm_user_rcv_msg+0x3a4/0x410
[ 44.212045] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 44.212045] ? __pfx_xfrm_user_rcv_msg+0x10/0x10
[ 44.212045] ? __pfx_xfrm_dump_sa+0x10/0x10
[ 44.212045] ? __pfx_xfrm_dump_sa_done+0x10/0x10
[ 44.212045] ? __stack_depot_save+0x382/0x4e0
[ 44.212045] ? filter_irq_stacks+0x1c/0x70
[ 44.212045] ? kasan_save_stack+0x32/0x50
[ 44.212045] ? kasan_save_stack+0x22/0x50
[ 44.212045] ? kasan_set_track+0x25/0x30
[ 44.212045] ? __kasan_slab_alloc+0x59/0x70
[ 44.212045] ? kmem_cache_alloc_node+0xf7/0x260
[ 44.212045] ? kmalloc_reserve+0xab/0x120
[ 44.212045] ? __alloc_skb+0xcf/0x210
[ 44.212045] ? netlink_sendmsg+0x509/0x700
[ 44.212045] ? sock_sendmsg+0xde/0xe0
[ 44.212045] ? __sys_sendto+0x18d/0x230
[ 44.212045] ? __x64_sys_sendto+0x71/0x90
[ 44.212045] ? do_syscall_64+0x3f/0x90
[ 44.212045] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] ? netlink_sendmsg+0x509/0x700
[ 44.212045] ? sock_sendmsg+0xde/0xe0
[ 44.212045] ? __sys_sendto+0x18d/0x230
[ 44.212045] ? __x64_sys_sendto+0x71/0x90
[ 44.212045] ? do_syscall_64+0x3f/0x90
[ 44.212045] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] ? kasan_save_stack+0x22/0x50
[ 44.212045] ? kasan_set_track+0x25/0x30
[ 44.212045] ? kasan_save_free_info+0x2e/0x50
[ 44.212045] ? __kasan_slab_free+0x10a/0x190
[ 44.212045] ? kmem_cache_free+0x9c/0x340
[ 44.212045] ? netlink_recvmsg+0x23c/0x660
[ 44.212045] ? sock_recvmsg+0xeb/0xf0
[ 44.212045] ? __sys_recvfrom+0x13c/0x1f0
[ 44.212045] ? __x64_sys_recvfrom+0x71/0x90
[ 44.212045] ? do_syscall_64+0x3f/0x90
[ 44.212045] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] ? copyout+0x3e/0x50
[ 44.212045] netlink_rcv_skb+0xd6/0x210
[ 44.212045] ? __pfx_xfrm_user_rcv_msg+0x10/0x10
[ 44.212045] ? __pfx_netlink_rcv_skb+0x10/0x10
[ 44.212045] ? __pfx_sock_has_perm+0x10/0x10
[ 44.212045] ? mutex_lock+0x8d/0xe0
[ 44.212045] ? __pfx_mutex_lock+0x10/0x10
[ 44.212045] xfrm_netlink_rcv+0x44/0x50
[ 44.212045] netlink_unicast+0x36f/0x4c0
[ 44.212045] ? __pfx_netlink_unicast+0x10/0x10
[ 44.212045] ? netlink_recvmsg+0x500/0x660
[ 44.212045] netlink_sendmsg+0x3b7/0x700
[ 44.212045] ? __pfx_netlink_sendmsg+0x10/0x10
[ 44.212045] ? __pfx_netlink_sendmsg+0x10/0x10
[ 44.212045] sock_sendmsg+0xde/0xe0
[ 44.212045] __sys_sendto+0x18d/0x230
[ 44.212045] ? __pfx___sys_sendto+0x10/0x10
[ 44.212045] ? rcu_core+0x44a/0xe10
[ 44.212045] ? __rseq_handle_notify_resume+0x45b/0x740
[ 44.212045] ? _raw_spin_lock_irq+0x81/0xe0
[ 44.212045] ? __pfx___rseq_handle_notify_resume+0x10/0x10
[ 44.212045] ? __pfx_restore_fpregs_from_fpstate+0x10/0x10
[ 44.212045] ? __pfx_blkcg_maybe_throttle_current+0x10/0x10
[ 44.212045] ? __pfx_task_work_run+0x10/0x10
[ 44.212045] __x64_sys_sendto+0x71/0x90
[ 44.212045] do_syscall_64+0x3f/0x90
[ 44.212045] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] RIP: 0033:0x44b7da
[ 44.212045] RSP: 002b:
00007ffdc8838548 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
[ 44.212045] RAX:
ffffffffffffffda RBX:
00007ffdc8839978 RCX:
000000000044b7da
[ 44.212045] RDX:
0000000000000038 RSI:
00007ffdc8838770 RDI:
0000000000000003
[ 44.212045] RBP:
00007ffdc88385b0 R08:
00007ffdc883858c R09:
000000000000000c
[ 44.212045] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000001
[ 44.212045] R13:
00007ffdc8839968 R14:
00000000004c37d0 R15:
0000000000000001
[ 44.212045] </TASK>
[ 44.212045]
[ 44.212045] Allocated by task 97:
[ 44.212045] kasan_save_stack+0x22/0x50
[ 44.212045] kasan_set_track+0x25/0x30
[ 44.212045] __kasan_kmalloc+0x7f/0x90
[ 44.212045] __kmalloc_node_track_caller+0x5b/0x140
[ 44.212045] kmemdup+0x21/0x50
[ 44.212045] xfrm_dump_sa+0x17d/0x290
[ 44.212045] netlink_dump+0x322/0x6c0
[ 44.212045] __netlink_dump_start+0x353/0x430
[ 44.212045] xfrm_user_rcv_msg+0x3a4/0x410
[ 44.212045] netlink_rcv_skb+0xd6/0x210
[ 44.212045] xfrm_netlink_rcv+0x44/0x50
[ 44.212045] netlink_unicast+0x36f/0x4c0
[ 44.212045] netlink_sendmsg+0x3b7/0x700
[ 44.212045] sock_sendmsg+0xde/0xe0
[ 44.212045] __sys_sendto+0x18d/0x230
[ 44.212045] __x64_sys_sendto+0x71/0x90
[ 44.212045] do_syscall_64+0x3f/0x90
[ 44.212045] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045]
[ 44.212045] The buggy address belongs to the object at
ffff88800870f300
[ 44.212045] which belongs to the cache kmalloc-64 of size 64
[ 44.212045] The buggy address is located 32 bytes inside of
[ 44.212045] allocated 36-byte region [
ffff88800870f300,
ffff88800870f324)
[ 44.212045]
[ 44.212045] The buggy address belongs to the physical page:
[ 44.212045] page:
00000000e4de16ee refcount:1 mapcount:0 mapping:
000000000 ...
[ 44.212045] flags: 0x100000000000200(slab|node=0|zone=1)
[ 44.212045] page_type: 0xffffffff()
[ 44.212045] raw:
0100000000000200 ffff888004c41640 dead000000000122 0000000000000000
[ 44.212045] raw:
0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[ 44.212045] page dumped because: kasan: bad access detected
[ 44.212045]
[ 44.212045] Memory state around the buggy address:
[ 44.212045]
ffff88800870f200: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 44.212045]
ffff88800870f280: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] >
ffff88800870f300: 00 00 00 00 04 fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] ^
[ 44.212045]
ffff88800870f380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045]
ffff88800870f400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] ==================================================================
By investigating the code, we find the root cause of this OOB is the lack
of checks in xfrm_dump_sa(). The buggy code allows a malicious user to pass
arbitrary value of filter->splen/dplen. Hence, with crafted xfrm states,
the attacker can achieve 8 bytes heap OOB read, which causes info leak.
if (attrs[XFRMA_ADDRESS_FILTER]) {
filter = kmemdup(nla_data(attrs[XFRMA_ADDRESS_FILTER]),
sizeof(*filter), GFP_KERNEL);
if (filter == NULL)
return -ENOMEM;
// NO MORE CHECKS HERE !!!
}
This patch fixes the OOB by adding necessary boundary checks, just like
the code in pfkey_dump() function.
Fixes:
d3623099d350 ("ipsec: add support of limited SA dump")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tam Nguyen [Wed, 26 Jul 2023 08:00:01 +0000 (15:00 +0700)]
i2c: designware: Handle invalid SMBus block data response length value
commit
69f035c480d76f12bf061148ccfd578e1099e5fc upstream.
In the I2C_FUNC_SMBUS_BLOCK_DATA case, the invalid length byte value
(outside of 1-32) of the SMBus block data response from the Slave device
is not correctly handled by the I2C Designware driver.
In case IC_EMPTYFIFO_HOLD_MASTER_EN==1, which cannot be detected
from the registers, the Master can be disabled only if the STOP bit
is set. Without STOP bit set, the Master remains active, holding the bus
until receiving a block data response length. This hangs the bus and
is unrecoverable.
Avoid this by issuing another dump read to reach the stop condition when
an invalid length byte is received.
Cc: stable@vger.kernel.org
Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230726080001.337353-3-tamnguyenchi@os.amperecomputing.com
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quan Nguyen [Wed, 26 Jul 2023 08:00:00 +0000 (15:00 +0700)]
i2c: designware: Correct length byte validation logic
commit
49d4db3953cb9004ff94efc0c176e026c820af5a upstream.
Commit
0daede80f870 ("i2c: designware: Convert driver to using regmap API")
changes the logic to validate the whole 32-bit return value of
DW_IC_DATA_CMD register instead of 8-bit LSB without reason.
Later, commit
f53f15ba5a85 ("i2c: designware: Get right data length"),
introduced partial fix but not enough because the "tmp > 0" still test
tmp as 32-bit value and is wrong in case the IC_DATA_CMD[11] is set.
Revert the logic to just before commit
0daede80f870
("i2c: designware: Convert driver to using regmap API").
Fixes:
f53f15ba5a85 ("i2c: designware: Get right data length")
Fixes:
0daede80f870 ("i2c: designware: Convert driver to using regmap API")
Cc: stable@vger.kernel.org
Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230726080001.337353-2-tamnguyenchi@os.amperecomputing.com
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xiaoshoukui [Tue, 15 Aug 2023 06:55:59 +0000 (02:55 -0400)]
btrfs: fix BUG_ON condition in btrfs_cancel_balance
commit
29eefa6d0d07e185f7bfe9576f91e6dba98189c2 upstream.
Pausing and canceling balance can race to interrupt balance lead to BUG_ON
panic in btrfs_cancel_balance. The BUG_ON condition in btrfs_cancel_balance
does not take this race scenario into account.
However, the race condition has no other side effects. We can fix that.
Reproducing it with panic trace like this:
kernel BUG at fs/btrfs/volumes.c:4618!
RIP: 0010:btrfs_cancel_balance+0x5cf/0x6a0
Call Trace:
<TASK>
? do_nanosleep+0x60/0x120
? hrtimer_nanosleep+0xb7/0x1a0
? sched_core_clone_cookie+0x70/0x70
btrfs_ioctl_balance_ctl+0x55/0x70
btrfs_ioctl+0xa46/0xd20
__x64_sys_ioctl+0x7d/0xa0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Race scenario as follows:
> mutex_unlock(&fs_info->balance_mutex);
> --------------------
> .......issue pause and cancel req in another thread
> --------------------
> ret = __btrfs_balance(fs_info);
>
> mutex_lock(&fs_info->balance_mutex);
> if (ret == -ECANCELED && atomic_read(&fs_info->balance_pause_req)) {
> btrfs_info(fs_info, "balance: paused");
> btrfs_exclop_balance(fs_info, BTRFS_EXCLOP_BALANCE_PAUSED);
> }
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: xiaoshoukui <xiaoshoukui@ruijie.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Thu, 17 Aug 2023 20:57:30 +0000 (16:57 -0400)]
btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
commit
c962098ca4af146f2625ed64399926a098752c9c upstream.
In production we were seeing a variety of WARN_ON()'s in the extent_map
code, specifically in btrfs_drop_extent_map_range() when we have to call
add_extent_mapping() for our second split.
Consider the following extent map layout
PINNED
[0 16K) [32K, 48K)
and then we call btrfs_drop_extent_map_range for [0, 36K), with
skip_pinned == true. The initial loop will have
start = 0
end = 36K
len = 36K
we will find the [0, 16k) extent, but since we are pinned we will skip
it, which has this code
start = em_end;
if (end != (u64)-1)
len = start + len - em_end;
em_end here is 16K, so now the values are
start = 16K
len = 16K + 36K - 16K = 36K
len should instead be 20K. This is a problem when we find the next
extent at [32K, 48K), we need to split this extent to leave [36K, 48k),
however the code for the split looks like this
split->start = start + len;
split->len = em_end - (start + len);
In this case we have
em_end = 48K
split->start = 16K + 36K // this should be 16K + 20K
split->len = 48K - (16K + 36K) // this overflows as 16K + 36K is 52K
and now we have an invalid extent_map in the tree that potentially
overlaps other entries in the extent map. Even in the non-overlapping
case we will have split->start set improperly, which will cause problems
with any block related calculations.
We don't actually need len in this loop, we can simply use end as our
end point, and only adjust start up when we find a pinned extent we need
to skip.
Adjust the logic to do this, which keeps us from inserting an invalid
extent map.
We only skip_pinned in the relocation case, so this is relatively rare,
except in the case where you are running relocation a lot, which can
happen with auto relocation on.
Fixes:
55ef68990029 ("Btrfs: Fix btrfs_drop_extent_cache for skip pinned case")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sherry Sun [Tue, 1 Aug 2023 02:23:04 +0000 (10:23 +0800)]
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
commit
282069845af388b08d622ad192b831dcd0549c62 upstream.
Do not read the data register to clear the error flags for lpuart32
platforms, the additional read may cause the receive FIFO underflow
since the DMA has already read the data register.
Actually all lpuart32 platforms support write 1 to clear those error
bits, let's use this method to better clear the error flags.
Fixes:
42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230801022304.24251-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yi Yang [Fri, 11 Aug 2023 03:11:21 +0000 (11:11 +0800)]
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
commit
3c4f8333b582487a2d1e02171f1465531cde53e3 upstream.
In commit
9b9c8195f3f0 ("tty: n_gsm: fix UAF in gsm_cleanup_mux"), the UAF
problem is not completely fixed. There is a race condition in
gsm_cleanup_mux(), which caused this UAF.
The UAF problem is triggered by the following race:
task[5046] task[5054]
----------------------- -----------------------
gsm_cleanup_mux();
dlci = gsm->dlci[0];
mutex_lock(&gsm->mutex);
gsm_cleanup_mux();
dlci = gsm->dlci[0]; //Didn't take the lock
gsm_dlci_release(gsm->dlci[i]);
gsm->dlci[i] = NULL;
mutex_unlock(&gsm->mutex);
mutex_lock(&gsm->mutex);
dlci->dead = true; //UAF
Fix it by assigning values after mutex_lock().
Link: https://syzkaller.appspot.com/text?tag=CrashReport&x=176188b5a80000
Cc: stable <stable@kernel.org>
Fixes:
9b9c8195f3f0 ("tty: n_gsm: fix UAF in gsm_cleanup_mux")
Fixes:
aa371e96f05d ("tty: n_gsm: fix restart handling via CLD command")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Link: https://lore.kernel.org/r/20230811031121.153237-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dragos Tatulea [Thu, 27 Jul 2023 17:57:54 +0000 (20:57 +0300)]
vdpa: Enable strict validation for netlinks ops
commit
f46c1e1620c6bbc9aad5693082efd1b80822e97c upstream.
The previous patches added the missing nla policies that were required for
validation to work.
Now strict validation on netlink ops can be enabled. This patch does it.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Cc: stable@vger.kernel.org
Message-Id: <
20230727175757.73988-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lin Ma [Thu, 27 Jul 2023 17:57:52 +0000 (20:57 +0300)]
vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check
commit
5d6ba607d6cb5c58a4ddf33381e18c83dbb4098f upstream.
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa max vqp attr to avoid
such bugs.
Fixes:
ad69dd0bf26b ("vdpa: Introduce query of device config layout")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: stable@vger.kernel.org
Message-Id: <
20230727175757.73988-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lin Ma [Thu, 27 Jul 2023 17:57:50 +0000 (20:57 +0300)]
vdpa: Add queue index attr to vdpa_nl_policy for nlattr length check
commit
b3003e1b54e057f5f3124e437b80c3bef26ed3fe upstream.
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa queue index attr to avoid
such bugs.
Fixes:
13b00b135665 ("vdpa: Add support for querying vendor statistics")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: stable@vger.kernelorg
Message-Id: <
20230727175757.73988-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lin Ma [Thu, 27 Jul 2023 17:57:48 +0000 (20:57 +0300)]
vdpa: Add features attr to vdpa_nl_policy for nlattr length check
commit
79c8651587504ba263d2fd67fd4406240fb21f69 upstream.
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa features attr to avoid
such bugs.
Fixes:
90fea5a800c3 ("vdpa: device feature provisioning")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: stable@vger.kernel.org
Message-Id: <
20230727175757.73988-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Lynch [Fri, 11 Aug 2023 03:37:55 +0000 (22:37 -0500)]
powerpc/rtas_flash: allow user copy to flash block cache objects
commit
4f3175979e62de3b929bfa54a0db4b87d36257a7 upstream.
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the
/proc/powerpc/rtas/firmware_update interface to prepare a system
firmware update yields a BUG():
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
NIP:
c0000000005991d0 LR:
c0000000005991cc CTR:
0000000000000000
REGS:
c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+)
MSR:
8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR:
24002242 XER:
0000000c
CFAR:
c0000000001fbd34 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP usercopy_abort+0xa0/0xb0
LR usercopy_abort+0x9c/0xb0
Call Trace:
usercopy_abort+0x9c/0xb0 (unreliable)
__check_heap_object+0x1b4/0x1d0
__check_object_size+0x2d0/0x380
rtas_flash_write+0xe4/0x250
proc_reg_write+0xfc/0x160
vfs_write+0xfc/0x4e0
ksys_write+0x90/0x160
system_call_exception+0x178/0x320
system_call_common+0x160/0x2c4
The blocks of the firmware image are copied directly from user memory
to objects allocated from flash_block_cache, so flash_block_cache must
be created using kmem_cache_create_usercopy() to mark it safe for user
access.
Fixes:
6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[mpe: Trim and indent oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuanjun Gong [Thu, 27 Jul 2023 17:03:18 +0000 (01:03 +0800)]
fbdev: mmp: fix value check in mmphw_probe()
commit
0872b2c0abc0e84ac82472959c8e14e35277549c upstream.
in mmphw_probe(), check the return value of clk_prepare_enable()
and return the error code if clk_prepare_enable() returns an
unexpected value.
Fixes:
d63028c38905 ("video: mmp display controller support")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parker Newman [Tue, 8 Aug 2023 14:01:06 +0000 (16:01 +0200)]
i2c: tegra: Fix i2c-tegra DMA config option processing
commit
27ec43c77b5db780a56fc3a6d6de6bf2f74614f7 upstream.
Tegra processors prior to Tegra186 used APB DMA for I2C requiring
CONFIG_TEGRA20_APB_DMA=y while Tegra186 and later use GPC DMA requiring
CONFIG_TEGRA186_GPC_DMA=y.
The check for if the processor uses APB DMA is inverted and so the wrong
DMA config options are checked.
This means if CONFIG_TEGRA20_APB_DMA=y but CONFIG_TEGRA186_GPC_DMA=n
with a Tegra186 or later processor the driver will incorrectly think DMA is
enabled and attempt to request DMA channels that will never be availible,
leaving the driver in a perpetual EPROBE_DEFER state.
Fixes:
48cb6356fae1 ("i2c: tegra: Add GPCDMA support")
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://lore.kernel.org/r/fcfcf9b3-c8c4-9b34-2ff8-cd60a3d490bd@connecttech.com
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yicong Yang [Tue, 1 Aug 2023 12:46:25 +0000 (20:46 +0800)]
i2c: hisi: Only handle the interrupt of the driver's transfer
commit
fff67c1b17ee093947bdcbac6f64d072e644159a upstream.
The controller may be shared with other port, for example the firmware.
Handle the interrupt from other sources will cause crash since some
data are not initialized. So only handle the interrupt of the driver's
transfer and discard others.
Fixes:
d62fbdb99a85 ("i2c: add support for HiSilicon I2C controller")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230801124625.63587-1-yangyicong@huawei.com
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chengfeng Ye [Fri, 7 Jul 2023 08:49:41 +0000 (08:49 +0000)]
i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
commit
4caf4cb1eaed469742ef719f2cc024b1ec3fa9e6 upstream.
iproc_i2c_rd_reg() and iproc_i2c_wr_reg() are called from both
interrupt context (e.g. bcm_iproc_i2c_isr) and process context
(e.g. bcm_iproc_i2c_suspend). Therefore, interrupts should be
disabled to avoid potential deadlock. To prevent this scenario,
use spin_lock_irqsave().
Fixes:
9a1038728037 ("i2c: iproc: add NIC I2C support")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Thu, 10 Aug 2023 20:34:21 +0000 (15:34 -0500)]
cifs: fix potential oops in cifs_oplock_break
[ Upstream commit
e8f5f849ffce24490eb9449e98312b66c0dba76f ]
With deferred close we can have closes that race with lease breaks,
and so with the current checks for whether to send the lease response,
oplock_response(), this can mean that an unmount (kill_sb) can occur
just before we were checking if the tcon->ses is valid. See below:
[Fri Aug 4 04:12:50 2023] RIP: 0010:cifs_oplock_break+0x1f7/0x5b0 [cifs]
[Fri Aug 4 04:12:50 2023] Code: 7d a8 48 8b 7d c0 c0 e9 02 48 89 45 b8 41 89 cf e8 3e f5 ff ff 4c 89 f7 41 83 e7 01 e8 82 b3 03 f2 49 8b 45 50 48 85 c0 74 5e <48> 83 78 60 00 74 57 45 84 ff 75 52 48 8b 43 98 48 83 eb 68 48 39
[Fri Aug 4 04:12:50 2023] RSP: 0018:
ffffb30607ddbdf8 EFLAGS:
00010206
[Fri Aug 4 04:12:50 2023] RAX:
632d223d32612022 RBX:
ffff97136944b1e0 RCX:
0000000080100009
[Fri Aug 4 04:12:50 2023] RDX:
0000000000000001 RSI:
0000000080100009 RDI:
ffff97136944b188
[Fri Aug 4 04:12:50 2023] RBP:
ffffb30607ddbe58 R08:
0000000000000001 R09:
ffffffffc08e0900
[Fri Aug 4 04:12:50 2023] R10:
0000000000000001 R11:
000000000000000f R12:
ffff97136944b138
[Fri Aug 4 04:12:50 2023] R13:
ffff97149147c000 R14:
ffff97136944b188 R15:
0000000000000000
[Fri Aug 4 04:12:50 2023] FS:
0000000000000000(0000) GS:
ffff9714f7c00000(0000) knlGS:
0000000000000000
[Fri Aug 4 04:12:50 2023] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[Fri Aug 4 04:12:50 2023] CR2:
00007fd8de9c7590 CR3:
000000011228e000 CR4:
0000000000350ef0
[Fri Aug 4 04:12:50 2023] Call Trace:
[Fri Aug 4 04:12:50 2023] <TASK>
[Fri Aug 4 04:12:50 2023] process_one_work+0x225/0x3d0
[Fri Aug 4 04:12:50 2023] worker_thread+0x4d/0x3e0
[Fri Aug 4 04:12:50 2023] ? process_one_work+0x3d0/0x3d0
[Fri Aug 4 04:12:50 2023] kthread+0x12a/0x150
[Fri Aug 4 04:12:50 2023] ? set_kthread_struct+0x50/0x50
[Fri Aug 4 04:12:50 2023] ret_from_fork+0x22/0x30
[Fri Aug 4 04:12:50 2023] </TASK>
To fix this change the ordering of the checks before sending the oplock_response
to first check if the openFileList is empty.
Fixes:
da787d5b7498 ("SMB3: Do not send lease break acknowledgment if all file handles have been closed")
Suggested-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eugenio Pérez [Wed, 2 Aug 2023 17:12:20 +0000 (20:12 +0300)]
vdpa/mlx5: Delete control vq iotlb in destroy_mr only when necessary
[ Upstream commit
ad03a0f44cdb97b46e5c84ed353dac9b8ae2c276 ]
mlx5_vdpa_destroy_mr can be called from .set_map with data ASID after
the control virtqueue ASID iotlb has been populated. The control vq
iotlb must not be cleared, since it will not be populated again.
So call the ASID aware destroy function which makes sure that the
right vq resource is destroyed.
Fixes:
8fcd20c30704 ("vdpa/mlx5: Support different address spaces for control and data")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Message-Id: <
20230802171231.11001-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dragos Tatulea [Wed, 2 Aug 2023 17:12:18 +0000 (20:12 +0300)]
vdpa/mlx5: Fix mr->initialized semantics
[ Upstream commit
9ee811009ad8f87982b69e61d07447d12233ad01 ]
The mr->initialized flag is shared between the control vq and data vq
part of the mr init/uninit. But if the control vq and data vq get placed
in different ASIDs, it can happen that initializing the control vq will
prevent the data vq mr from being initialized.
This patch consolidates the control and data vq init parts into their
own init functions. The mr->initialized will now be used for the data vq
only. The control vq currently doesn't need a flag.
The uninitializing part is also taken care of: mlx5_vdpa_destroy_mr got
split into data and control vq functions which are now also ASID aware.
Fixes:
8fcd20c30704 ("vdpa/mlx5: Support different address spaces for control and data")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Message-Id: <
20230802171231.11001-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxime Coquelin [Wed, 5 Jul 2023 11:45:05 +0000 (13:45 +0200)]
vduse: Use proper spinlock for IRQ injection
[ Upstream commit
7ca26efb09a1543fddb29308ea3b63b66cb5d3ee ]
The IRQ injection work used spin_lock_irq() to protect the
scheduling of the softirq, but spin_lock_bh() should be
used.
With spin_lock_irq(), we noticed delay of more than 6
seconds between the time a NAPI polling work is scheduled
and the time it is executed.
Fixes:
c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Cc: xieyongji@bytedance.com
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <
20230705114505.63274-1-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wolfram Sang [Thu, 29 Jun 2023 12:05:26 +0000 (14:05 +0200)]
virtio-mmio: don't break lifecycle of vm_dev
[ Upstream commit
55c91fedd03d7b9cf0c5199b2eb12b9b8e95281a ]
vm_dev has a separate lifecycle because it has a 'struct device'
embedded. Thus, having a release callback for it is correct.
Allocating the vm_dev struct with devres totally breaks this protection,
though. Instead of waiting for the vm_dev release callback, the memory
is freed when the platform_device is removed. Resulting in a
use-after-free when finally the callback is to be called.
To easily see the problem, compile the kernel with
CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs.
The fix is easy, don't use devres in this case.
Found during my research about object lifetime problems.
Fixes:
7eb781b1bbb7 ("virtio_mmio: add cleanup for virtio_mmio_probe")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-Id: <
20230629120526.7184-1-wsa+renesas@sang-engineering.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Filipe Manana [Wed, 28 Jun 2023 16:13:37 +0000 (17:13 +0100)]
btrfs: fix use-after-free of new block group that became unused
[ Upstream commit
0657b20c5a76c938612f8409735a8830d257866e ]
If a task creates a new block group and that block group becomes unused
before we finish its creation, at btrfs_create_pending_block_groups(),
then when btrfs_mark_bg_unused() is called against the block group, we
assume that the block group is currently in the list of block groups to
reclaim, and we move it out of the list of new block groups and into the
list of unused block groups. This has two consequences:
1) We move it out of the list of new block groups associated to the
current transaction. So the block group creation is not finished and
if we attempt to delete the bg because it's unused, we will not find
the block group item in the extent tree (or the new block group tree),
its device extent items in the device tree etc, resulting in the
deletion to fail due to the missing items;
2) We don't increment the reference count on the block group when we
move it to the list of unused block groups, because we assumed the
block group was on the list of block groups to reclaim, and in that
case it already has the correct reference count. However the block
group was on the list of new block groups, in which case no extra
reference was taken because it's local to the current task. This
later results in doing an extra reference count decrement when
removing the block group from the unused list, eventually leading the
reference count to 0.
This second case was caught when running generic/297 from fstests, which
produced the following assertion failure and stack trace:
[589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299
[589.559] ------------[ cut here ]------------
[589.559] kernel BUG at fs/btrfs/block-group.c:4299!
[589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.561] Code: 68 62 da c0 (...)
[589.561] RSP: 0018:
ffffa55a8c3b3d98 EFLAGS:
00010246
[589.561] RAX:
0000000000000058 RBX:
ffff8f030d7f2000 RCX:
0000000000000000
[589.562] RDX:
0000000000000000 RSI:
ffffffff953f0878 RDI:
00000000ffffffff
[589.562] RBP:
ffff8f030d7f2088 R08:
0000000000000000 R09:
ffffa55a8c3b3c50
[589.562] R10:
0000000000000001 R11:
0000000000000001 R12:
ffff8f05850b4c00
[589.562] R13:
ffff8f030d7f2090 R14:
ffff8f05850b4cd8 R15:
dead000000000100
[589.563] FS:
00007f497fd2e840(0000) GS:
ffff8f09dfc00000(0000) knlGS:
0000000000000000
[589.563] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[589.563] CR2:
00007f497ff8ec10 CR3:
0000000271472006 CR4:
0000000000370ee0
[589.563] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[589.564] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[589.564] Call Trace:
[589.564] <TASK>
[589.565] ? __die_body+0x1b/0x60
[589.565] ? die+0x39/0x60
[589.565] ? do_trap+0xeb/0x110
[589.565] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.566] ? do_error_trap+0x6a/0x90
[589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.566] ? exc_invalid_op+0x4e/0x70
[589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.567] ? asm_exc_invalid_op+0x16/0x20
[589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.567] close_ctree+0x35d/0x560 [btrfs]
[589.568] ? fsnotify_sb_delete+0x13e/0x1d0
[589.568] ? dispose_list+0x3a/0x50
[589.568] ? evict_inodes+0x151/0x1a0
[589.568] generic_shutdown_super+0x73/0x1a0
[589.569] kill_anon_super+0x14/0x30
[589.569] btrfs_kill_super+0x12/0x20 [btrfs]
[589.569] deactivate_locked_super+0x2e/0x70
[589.569] cleanup_mnt+0x104/0x160
[589.570] task_work_run+0x56/0x90
[589.570] exit_to_user_mode_prepare+0x160/0x170
[589.570] syscall_exit_to_user_mode+0x22/0x50
[589.570] ? __x64_sys_umount+0x12/0x20
[589.571] do_syscall_64+0x48/0x90
[589.571] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[589.571] RIP: 0033:0x7f497ff0a567
[589.571] Code: af 98 0e (...)
[589.572] RSP: 002b:
00007ffc98347358 EFLAGS:
00000246 ORIG_RAX:
00000000000000a6
[589.572] RAX:
0000000000000000 RBX:
00007f49800b8264 RCX:
00007f497ff0a567
[589.572] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000557f558abfa0
[589.573] RBP:
0000557f558a6ba0 R08:
0000000000000000 R09:
00007ffc98346100
[589.573] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
[589.573] R13:
0000557f558abfa0 R14:
0000557f558a6cb0 R15:
0000557f558a6dd0
[589.573] </TASK>
[589.574] Modules linked in: dm_snapshot dm_thin_pool (...)
[589.576] ---[ end trace
0000000000000000 ]---
Fix this by adding a runtime flag to the block group to tell that the
block group is still in the list of new block groups, and therefore it
should not be moved to the list of unused block groups, at
btrfs_mark_bg_unused(), until the flag is cleared, when we finish the
creation of the block group at btrfs_create_pending_block_groups().
Fixes:
a9f189716cf1 ("btrfs: move out now unused BG from the reclaim list")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Sterba [Mon, 31 Oct 2022 19:33:46 +0000 (20:33 +0100)]
btrfs: convert btrfs_block_group::seq_zone to runtime flag
[ Upstream commit
961f5b8bf48a463ac5fe5b13143426d79eb41817 ]
In zoned mode the sequential status of zone can be also tracked in the
runtime flags of block group.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of:
0657b20c5a76 ("btrfs: fix use-after-free of new block group that became unused")
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Sterba [Mon, 31 Oct 2022 19:33:44 +0000 (20:33 +0100)]
btrfs: convert btrfs_block_group::needs_free_space to runtime flag
[ Upstream commit
0d7764ff58b4b45c39eb03f2c74a819c1a88fa7b ]
We already have flags in block group to track various status bits,
convert needs_free_space as well and reduce size of btrfs_block_group.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of:
0657b20c5a76 ("btrfs: fix use-after-free of new block group that became unused")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Naohiro Aota [Tue, 6 Jun 2023 05:36:34 +0000 (14:36 +0900)]
btrfs: move out now unused BG from the reclaim list
[ Upstream commit
a9f189716cf15913c453299d72f69c51a9b0f86b ]
An unused block group is easy to remove to free up space and should be
reclaimed fast. Such block group can often already be a target of the
reclaim process. As we check list_empty(&bg->bg_list), we keep it in the
reclaim list. That block group is never reclaimed until the file system
is filled e.g. up to 75%.
Instead, we can move unused block group to the unused list and delete it
fast.
Fixes:
18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Vetter [Thu, 6 Apr 2023 13:21:07 +0000 (15:21 +0200)]
video/aperture: Only remove sysfb on the default vga pci device
[ Upstream commit
5ae3716cfdcd286268133867f67d0803847acefc ]
Instead of calling aperture_remove_conflicting_devices() to remove the
conflicting devices, just call to aperture_detach_devices() to detach
the device that matches the same PCI BAR / aperture range. Since the
former is just a wrapper of the latter plus a sysfb_disable() call,
and now that's done in this function but only for the primary devices.
This fixes a regression introduced by commit
ee7a69aa38d8 ("fbdev:
Disable sysfb device registration when removing conflicting FBs"),
where we remove the sysfb when loading a driver for an unrelated pci
device, resulting in the user losing their efifb console or similar.
Note that in practice this only is a problem with the nvidia blob,
because that's the only gpu driver people might install which does not
come with an fbdev driver of it's own. For everyone else the real gpu
driver will restore a working console.
Also note that in the referenced bug there's confusion that this same
bug also happens on amdgpu. But that was just another amdgpu specific
regression, which just happened to happen at roughly the same time and
with the same user-observable symptoms. That bug is fixed now, see
https://bugzilla.kernel.org/show_bug.cgi?id=216331#c15
Note that we should not have any such issues on non-pci multi-gpu
issues, because I could only find two such cases:
- SoC with some external panel over spi or similar. These panel
drivers do not use drm_aperture_remove_conflicting_framebuffers(),
so no problem.
- vga+mga, which is a direct console driver and entirely bypasses all
this.
For the above reasons the cc: stable is just notionally, this patch
will need a backport and that's up to nvidia if they care enough.
v2:
- Explain a bit better why other multi-gpu that aren't pci shouldn't
have any issues with making all this fully pci specific.
v3
- polish commit message (Javier)
v4:
- Fix commit message style (i.e., commit 1234 ("..."))
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Fixes:
ee7a69aa38d8 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Tested-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216303#c28
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Aaron Plattner <aplattner@nvidia.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # v5.19+ (if someone else does the backport)
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-8-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Zimmermann [Mon, 19 Dec 2022 16:05:06 +0000 (17:05 +0100)]
fbdev/hyperv-fb: Do not set struct fb_info.apertures
[ Upstream commit
81d2393485f0990cf6566b0c9e0697c199f68ae5 ]
Generic fbdev drivers use the apertures field in struct fb_info to
control ownership of the framebuffer memory and graphics device. Do
not set the values in hyperv-fb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219160516.23436-9-tzimmermann@suse.de
Stable-dep-of:
5ae3716cfdcd ("video/aperture: Only remove sysfb on the default vga pci device")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xu Yang [Mon, 17 Jul 2023 02:28:33 +0000 (10:28 +0800)]
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
[ Upstream commit
ee70b908f77a9d8f689dea986f09e6d7dc481934 ]
Property name "phy-3p0-supply" is used instead of "phy-reg_3p0-supply".
Fixes:
9f30b6b1a957 ("ARM: dts: imx: Add basic dtsi file for imx6sll")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Zyngier [Thu, 13 Jul 2023 07:06:57 +0000 (08:06 +0100)]
KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
[ Upstream commit
b321c31c9b7b309dcde5e8854b741c8e6a9a05f0 ]
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when
running a preemptible kernel, as it is possible that a vCPU is blocked
without requesting a doorbell interrupt.
The issue is that any preemption that occurs between vgic_v4_put() and
schedule() on the block path will mark the vPE as nonresident and *not*
request a doorbell irq. This occurs because when the vcpu thread is
resumed on its way to block, vcpu_load() will make the vPE resident
again. Once the vcpu actually blocks, we don't request a doorbell
anymore, and the vcpu won't be woken up on interrupt delivery.
Fix it by tracking that we're entering WFI, and key the doorbell
request on that flag. This allows us not to make the vPE resident
when going through a preempt/schedule cycle, meaning we don't lose
any state.
Cc: stable@vger.kernel.org
Fixes:
8e01d9a396e6 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Suggested-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hersen Wu [Tue, 28 Mar 2023 14:45:24 +0000 (10:45 -0400)]
drm/amd/display: fix access hdcp_workqueue assert
[ Upstream commit
cdff36a0217aadf5cbc167893ad1c0da869619cb ]
[Why] hdcp are enabled for asics from raven. for old asics
which hdcp are not enabled, hdcp_workqueue are null. some
access to hdcp work queue are not guarded with pointer check.
[How] add hdcp_workqueue pointer check before access workqueue.
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hersen wu [Tue, 15 Nov 2022 19:20:56 +0000 (14:20 -0500)]
drm/amd/display: phase3 mst hdcp for multiple displays
[ Upstream commit
e8fd3eeb5e8711af39b00642da06474e52f4780c ]
[Why]
multiple display hdcp are enabled within event_property_validate,
event_property_update by looping all displays on mst hub. when
one of display on mst hub in unplugged or disabled, hdcp are
disabled for all displays on mst hub within hdcp_reset_display
by looping all displays of mst link. for displays still active,
their encryption status are off. kernel driver will not run hdcp
authentication again. therefore, hdcp are not enabled automatically.
[How]
within is_content_protection_different, check drm_crtc_state changes
of all displays on mst hub, if need, triger hdcp_update_display to
re-run hdcp authentication.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
cdff36a0217a ("drm/amd/display: fix access hdcp_workqueue assert")
Signed-off-by: Sasha Levin <sashal@kernel.org>
hersen wu [Tue, 15 Nov 2022 15:39:55 +0000 (10:39 -0500)]
drm/amd/display: save restore hdcp state when display is unplugged from mst hub
[ Upstream commit
82986fd631fa04bcedaefe11a6b3767601cbe84f ]
[Why]
connector hdcp properties are lost after display is
unplgged from mst hub. connector is destroyed with
dm_dp_mst_connector_destroy. when display is plugged
back, hdcp is not desired and it wouldnt be enabled.
[How]
save hdcp properties into hdcp_work within
amdgpu_dm_atomic_commit_tail. If the same display is
plugged back with same display index, its hdcp
properties will be retrieved from hdcp_work within
dm_dp_mst_get_modes.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
cdff36a0217a ("drm/amd/display: fix access hdcp_workqueue assert")
Signed-off-by: Sasha Levin <sashal@kernel.org>