review.tizen.org Git - platform/kernel/linux-starfive.git/log

md: don't rely on 'mddev->pers' to be set in mddev_suspend()

[ Upstream commit b721e7885eb242aa2459ee66bb42ceef1bcf0f0c ]

'active_io' used to be initialized while the array is running, and
'mddev->pers' is set while the array is running as well. Hence caller
must hold 'reconfig_mutex' and guarantee 'mddev->pers' is set before
calling mddev_suspend().

Now that 'active_io' is initialized when mddev is allocated, such
restriction doesn't exist anymore. In the meantime, follow up patches
will refactor mddev_suspend(), hence add checking for 'mddev->pers' to
prevent null-ptr-deref.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230825030956.1527023-4-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/edid: Fixup h/vsync_end instead of h/vtotal

[ Upstream commit 2682768bde745b10ae126a322cdcaf532cf88851 ]

There are some weird EDIDs floating around that have the sync
pulse extending beyond the end of the blanking period.

On the currently problemtic machine (HP Omni 120) EDID reports
the following mode:
"1600x900": 60 108000 1600 1780 1860 1800 900 910 913 1000 0x40 0x5
which is then "corrected" to have htotal=1861 by the current drm_edid.c
code.

The fixup code was originally added in commit 7064fef56369 ("drm: work
around EDIDs with bad htotal/vtotal values"). Googling around we end up in
https://bugs.launchpad.net/ubuntu/hardy/+source/xserver-xorg-video-intel/+bug/297245
where we find an EDID for a Dell Studio 15, which reports:
(II) VESA(0): clock: 65.0 MHz   Image Size:  331 x 207 mm
(II) VESA(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1337 h_border: 0
(II) VESA(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 810 v_border: 0

Note that if we use the hblank size (as opposed of the hsync_end)
from the DTD to determine htotal we get exactly 60Hz refresh rate in
both cases, whereas using hsync_end to determine htotal we get a
slightly lower refresh rates. This makes me believe the using the
hblank size is what was intended even in those cases.

Also note that in case of the HP Onmi 120 the VBIOS boots with these:
  crtc timings: 108000 1600 1780 1860 1800 900 910 913 1000, type: 0x40 flags: 0x5
ie. it just blindly stuffs the bogus hsync_end and htotal from the DTD
into the transcoder timing registers, and the display works. I believe
the (at least more modern) hardware will automagically terminate the hsync
pulse when the timing generator reaches htotal, which again points that we
should use the hblank size to determine htotal. Unfortunatley the old bug
reports for the Dell machines are extremely lacking in useful details so
we have no idea what kind of timings the VBIOS programmed into the
hardware :(

Let's just flip this quirk around and reduce the length of the sync
pulse instead of extending the blanking period. This at least seems
to be the correct thing to do on more modern hardware. And if any
issues crop up on older hardware we need to debug them properly.

v2: Add debug message breadcrumbs (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8895
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920211934.14920-1-ville.syrjala@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: add seamless pipe topology transition check

[ Upstream commit 15c6798ae26d5c7a7776f4f7d0c1fa8c462688a2 ]

[why]
We have a few cases where we need to perform update topology update
in dc update interface. However some of the updates are not seamless
This could cause user noticible glitches. To enforce seamless transition
we are adding a checking condition and error logging so the corruption
as result of non seamless transition can be easily spotted.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Don't lock phantom pipe on disabling

[ Upstream commit cbb4c9bc55427774ca4d819933e1b5fa38a6fb44 ]

[Description]
- When disabling a phantom pipe, we first enable the phantom
  OTG so the double buffer update can successfully take place
- However, want to avoid locking the phantom otherwise setting
  DPG_EN=1 for the phantom pipe is blocked (without this we could
  hit underflow due to phantom HUBP being blanked by default)

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Blank phantom OTG before enabling

[ Upstream commit e87a6c5b7780b5f423797351eb586ed96cc6d151 ]

[Description]
Before enabling the phantom OTG for an update we
must enable DPG to avoid underflow.

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/komeda: drop all currently held locks if deadlock happens

[ Upstream commit 19ecbe8325a2a7ffda5ff4790955b84eaccba49f ]

If komeda_pipeline_unbound_components() returns -EDEADLK,
it means that a deadlock happened in the locking context.
Currently, komeda is not dealing with the deadlock properly,producing the
following output when CONFIG_DEBUG_WW_MUTEX_SLOWPATH is enabled:

------------[ cut here ]------------
[   26.103984] WARNING: CPU: 2 PID: 345 at drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c:1248
       komeda_release_unclaimed_resources+0x13c/0x170
[   26.117453] Modules linked in:
[   26.120511] CPU: 2 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G   W  5.10.110-SE-SDK1.8-dirty #16
[   26.131374] Hardware name: Siengine Se1000 Evaluation board (DT)
[   26.137379] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--)
[   26.143385] pc : komeda_release_unclaimed_resources+0x13c/0x170
[   26.149301] lr : komeda_release_unclaimed_resources+0xbc/0x170
[   26.155130] sp : ffff800017b8b8d0
[   26.158442] pmr_save: 000000e0
[   26.161493] x29: ffff800017b8b8d0 x28: ffff000cf2f96200
[   26.166805] x27: ffff000c8f5a8800 x26: 0000000000000000
[   26.172116] x25: 0000000000000038 x24: ffff8000116a0140
[   26.177428] x23: 0000000000000038 x22: ffff000cf2f96200
[   26.182739] x21: ffff000cfc300300 x20: ffff000c8ab77080
[   26.188051] x19: 0000000000000003 x18: 0000000000000000
[   26.193362] x17: 0000000000000000 x16: 0000000000000000
[   26.198672] x15: b400e638f738ba38 x14: 0000000000000000
[   26.203983] x13: 0000000106400a00 x12: 0000000000000000
[   26.209294] x11: 0000000000000000 x10: 0000000000000000
[   26.214604] x9 : ffff800012f80000 x8 : ffff000ca3308000
[   26.219915] x7 : 0000000ff3000000 x6 : ffff80001084034c
[   26.225226] x5 : ffff800017b8bc40 x4 : 000000000000000f
[   26.230536] x3 : ffff000ca3308000 x2 : 0000000000000000
[   26.235847] x1 : 0000000000000000 x0 : ffffffffffffffdd
[   26.241158] Call trace:
[   26.243604] komeda_release_unclaimed_resources+0x13c/0x170
[   26.249175] komeda_crtc_atomic_check+0x68/0xf0
[   26.253706] drm_atomic_helper_check_planes+0x138/0x1f4
[   26.258929] komeda_kms_check+0x284/0x36c
[   26.262939] drm_atomic_check_only+0x40c/0x714
[   26.267381] drm_atomic_nonblocking_commit+0x1c/0x60
[   26.272344] drm_mode_atomic_ioctl+0xa3c/0xb8c
[   26.276787] drm_ioctl_kernel+0xc4/0x120
[   26.280708] drm_ioctl+0x268/0x534
[   26.284109] __arm64_sys_ioctl+0xa8/0xf0
[   26.288030] el0_svc_common.constprop.0+0x80/0x240
[   26.292817] do_el0_svc+0x24/0x90
[   26.296132] el0_svc+0x20/0x30
[   26.299185] el0_sync_handler+0xe8/0xf0
[   26.303018] el0_sync+0x1a4/0x1c0
[   26.306330] irq event stamp: 0
[   26.309384] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[   26.315650] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c
[   26.323825] softirqs last  enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c
[   26.331997] softirqs last disabled at (0): [<0000000000000000>] 0x0
[   26.338261] ---[ end trace 20ae984fa860184a ]---
[   26.343021] ------------[ cut here ]------------
[   26.347646] WARNING: CPU: 3 PID: 345 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x84/0x90
[   26.357727] Modules linked in:
[   26.360783] CPU: 3 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G   W  5.10.110-SE-SDK1.8-dirty #16
[   26.371645] Hardware name: Siengine Se1000 Evaluation board (DT)
[   26.377647] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--)
[   26.383649] pc : drm_modeset_drop_locks+0x84/0x90
[   26.388351] lr : drm_mode_atomic_ioctl+0x860/0xb8c
[   26.393137] sp : ffff800017b8bb10
[   26.396447] pmr_save: 000000e0
[   26.399497] x29: ffff800017b8bb10 x28: 0000000000000001
[   26.404807] x27: 0000000000000038 x26: 0000000000000002
[   26.410115] x25: ffff000cecbefa00 x24: ffff000cf2f96200
[   26.415423] x23: 0000000000000001 x22: 0000000000000018
[   26.420731] x21: 0000000000000001 x20: ffff800017b8bc10
[   26.426039] x19: 0000000000000000 x18: 0000000000000000
[   26.431347] x17: 0000000002e8bf2c x16: 0000000002e94c6b
[   26.436655] x15: 0000000002ea48b9 x14: ffff8000121f0300
[   26.441963] x13: 0000000002ee2ca8 x12: ffff80001129cae0
[   26.447272] x11: ffff800012435000 x10: ffff000ed46b5e88
[   26.452580] x9 : ffff000c9935e600 x8 : 0000000000000000
[   26.457888] x7 : 000000008020001e x6 : 000000008020001f
[   26.463196] x5 : ffff80001085fbe0 x4 : fffffe0033a59f20
[   26.468504] x3 : 000000008020001e x2 : 0000000000000000
[   26.473813] x1 : 0000000000000000 x0 : ffff000c8f596090
[   26.479122] Call trace:
[   26.481566] drm_modeset_drop_locks+0x84/0x90
[   26.485918] drm_mode_atomic_ioctl+0x860/0xb8c
[   26.490359] drm_ioctl_kernel+0xc4/0x120
[   26.494278] drm_ioctl+0x268/0x534
[   26.497677] __arm64_sys_ioctl+0xa8/0xf0
[   26.501598] el0_svc_common.constprop.0+0x80/0x240
[   26.506384] do_el0_svc+0x24/0x90
[   26.509697] el0_svc+0x20/0x30
[   26.512748] el0_sync_handler+0xe8/0xf0
[   26.516580] el0_sync+0x1a4/0x1c0
[   26.519891] irq event stamp: 0
[   26.522943] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[   26.529207] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c
[   26.537379] softirqs last  enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c
[   26.545550] softirqs last disabled at (0): [<0000000000000000>] 0x0
[   26.551812] ---[ end trace 20ae984fa860184b ]---

According to the call trace information,it can be located to be
WARN_ON(IS_ERR(c_st)) in the komeda_pipeline_unbound_components function;
Then follow the function.
komeda_pipeline_unbound_components
-> komeda_component_get_state_and_set_user
  -> komeda_pipeline_get_state_and_set_crtc
    -> komeda_pipeline_get_state
      ->drm_atomic_get_private_obj_state
        -> drm_atomic_get_private_obj_state
          -> drm_modeset_lock

komeda_pipeline_unbound_components
-> komeda_component_get_state_and_set_user
  -> komeda_component_get_state
    -> drm_atomic_get_private_obj_state
     -> drm_modeset_lock

ret = drm_modeset_lock(&obj->lock, state->acquire_ctx); if (ret)
return ERR_PTR(ret);
Here it return -EDEADLK.

deal with the deadlock as suggested by [1], using the
function drm_modeset_backoff().
[1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking

Therefore, handling this problem can be solved
by adding return -EDEADLK back to the drm_modeset_backoff processing flow
in the drm_mode_atomic_ioctl function.

Signed-off-by: baozhu.liu <lucas.liu@siengine.com>
Signed-off-by: menghui.huang <menghui.huang@siengine.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804013117.6870-1-menghui.huang@siengine.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: ratelimited SQ interrupt messages

[ Upstream commit 37fb87910724f21a1f27a75743d4f9accdee77fb ]

No functional change. Use ratelimited version of pr_ to avoid
overflowing of dmesg buffer

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/gma500: Fix call trace when psb_gem_mm_init() fails

[ Upstream commit da596080b2b400c50fe9f8f237bcaf09fed06af8 ]

Because the gma_irq_install() is call after psb_gem_mm_init() function,
when psb_gem_mm_init() fails, the interrupt line haven't been allocated.
Yet the gma_irq_uninstall() is called in the psb_driver_unload() function
without checking if checking the irq is registered or not.

The calltrace is appended as following:

[   20.539253] ioremap memtype_reserve failed -16
[   20.543895] gma500 0000:00:02.0: Failure to map stolen base.
[   20.565049] ------------[ cut here ]------------
[   20.565066] Trying to free already-free IRQ 16
[   20.565087] WARNING: CPU: 1 PID: 381 at kernel/irq/manage.c:1893 free_irq+0x209/0x370
[   20.565316] CPU: 1 PID: 381 Comm: systemd-udevd Tainted: G         C         6.5.0-rc1+ #368
[   20.565329] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./IMB-140D Plus, BIOS P1.10 11/18/2013
[   20.565338] RIP: 0010:free_irq+0x209/0x370
[   20.565357] Code: 41 5d 41 5e 41 5f 5d 31 d2 89 d1 89 d6 89 d7 41 89 d1 c3 cc cc cc cc 8b 75 d0 48 c7 c7 e0 77 12 9f 4c 89 4d c8 e8 57 fe f4 ff <0f> 0b 48 8b 75 c8 4c 89 f7 e8 29 f3 f1 00 49 8b 47 40 48 8b 40 78
[   20.565369] RSP: 0018:ffffae3b40733808 EFLAGS: 00010046
[   20.565382] RAX: 0000000000000000 RBX: ffff9f8082bfe000 RCX: 0000000000000000
[   20.565390] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   20.565397] RBP: ffffae3b40733840 R08: 0000000000000000 R09: 0000000000000000
[   20.565405] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f80871c3100
[   20.565413] R13: ffff9f80835d3360 R14: ffff9f80835d32a4 R15: ffff9f80835d3200
[   20.565424] FS:  00007f13d36458c0(0000) GS:ffff9f8138880000(0000) knlGS:0000000000000000
[   20.565434] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   20.565441] CR2: 00007f0d046f3f20 CR3: 0000000006c8c000 CR4: 00000000000006e0
[   20.565450] Call Trace:
[   20.565458]  <TASK>
[   20.565470]  ? show_regs+0x72/0x90
[   20.565488]  ? free_irq+0x209/0x370
[   20.565504]  ? __warn+0x8d/0x160
[   20.565520]  ? free_irq+0x209/0x370
[   20.565536]  ? report_bug+0x1bb/0x1d0
[   20.565555]  ? handle_bug+0x46/0x90
[   20.565572]  ? exc_invalid_op+0x19/0x80
[   20.565587]  ? asm_exc_invalid_op+0x1b/0x20
[   20.565607]  ? free_irq+0x209/0x370
[   20.565625]  ? free_irq+0x209/0x370
[   20.565644]  gma_irq_uninstall+0x15b/0x1e0 [gma500_gfx]
[   20.565728]  psb_driver_unload+0x27/0x190 [gma500_gfx]
[   20.565800]  psb_pci_probe+0x5d2/0x790 [gma500_gfx]
[   20.565873]  local_pci_probe+0x48/0xb0
[   20.565892]  pci_device_probe+0xc8/0x280
[   20.565912]  really_probe+0x1d2/0x440
[   20.565929]  __driver_probe_device+0x8a/0x190
[   20.565944]  driver_probe_device+0x23/0xd0
[   20.565957]  __driver_attach+0x10f/0x220
[   20.565971]  ? __pfx___driver_attach+0x10/0x10
[   20.565984]  bus_for_each_dev+0x7a/0xe0
[   20.566002]  driver_attach+0x1e/0x30
[   20.566014]  bus_add_driver+0x127/0x240
[   20.566029]  driver_register+0x64/0x140
[   20.566043]  ? __pfx_psb_init+0x10/0x10 [gma500_gfx]
[   20.566111]  __pci_register_driver+0x68/0x80
[   20.566128]  psb_init+0x2c/0xff0 [gma500_gfx]
[   20.566194]  do_one_initcall+0x46/0x330
[   20.566214]  ? kmalloc_trace+0x2a/0xb0
[   20.566233]  do_init_module+0x6a/0x270
[   20.566250]  load_module+0x207f/0x23a0
[   20.566278]  init_module_from_file+0x9c/0xf0
[   20.566293]  ? init_module_from_file+0x9c/0xf0
[   20.566315]  idempotent_init_module+0x184/0x240
[   20.566335]  __x64_sys_finit_module+0x64/0xd0
[   20.566352]  do_syscall_64+0x59/0x90
[   20.566366]  ? ksys_mmap_pgoff+0x123/0x270
[   20.566378]  ? __secure_computing+0x9b/0x110
[   20.566392]  ? exit_to_user_mode_prepare+0x39/0x190
[   20.566406]  ? syscall_exit_to_user_mode+0x2a/0x50
[   20.566420]  ? do_syscall_64+0x69/0x90
[   20.566433]  ? do_syscall_64+0x69/0x90
[   20.566445]  ? do_syscall_64+0x69/0x90
[   20.566458]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[   20.566472] RIP: 0033:0x7f13d351ea3d
[   20.566485] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 a3 0f 00 f7 d8 64 89 01 48
[   20.566496] RSP: 002b:00007ffe566c1fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   20.566510] RAX: ffffffffffffffda RBX: 000055e66806eec0 RCX: 00007f13d351ea3d
[   20.566519] RDX: 0000000000000000 RSI: 00007f13d36d9441 RDI: 0000000000000010
[   20.566527] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002
[   20.566535] R10: 0000000000000010 R11: 0000000000000246 R12: 00007f13d36d9441
[   20.566543] R13: 000055e6681108c0 R14: 000055e66805ba70 R15: 000055e66819a9c0
[   20.566559]  </TASK>
[   20.566566] ---[ end trace 0000000000000000 ]---

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727185855.713318-1-suijingfeng@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e

[ Upstream commit 916646758aea81a143ce89103910f715ed923346 ]

Thinkpad X120e also needs this battery quirk.

Signed-off-by: Olli Asikainen <olli.asikainen@gmail.com>
Link: https://lore.kernel.org/r/20231024190922.2742-1-olli.asikainen@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: address: Fix address translation when address-size is greater than 2

[ Upstream commit 42604f8eb7ba04b589375049cc76282dad4677d2 ]

With the recent addition of of_pci_prop_ranges() in commit 407d1a51921e
("PCI: Create device tree node for bridge"), the ranges property can
have a 3 cells child address, a 3 cells parent address and a 2 cells
child size.

A range item property for a PCI device is filled as follow:
  <BAR_nbr> 0 0 <phys.hi> <phys.mid> <phys.low> <BAR_sizeh> <BAR_sizel>
  <-- Child --> <-- Parent (PCI definition) --> <- BAR size (64bit) -->

This allow to translate BAR addresses from the DT. For instance:
pci@0,0 {
  #address-cells = <0x03>;
  #size-cells = <0x02>;
  device_type = "pci";
  compatible = "pci11ab,100", "pciclass,060400", "pciclass,0604";
  ranges = <0x82000000 0x00 0xe8000000
            0x82000000 0x00 0xe8000000
    0x00 0x4400000>;
  ...
  dev@0,0 {
    #address-cells = <0x03>;
    #size-cells = <0x02>;
    compatible = "pci1055,9660", "pciclass,020000", "pciclass,0200";
    /* Translations for BAR0 to BAR5 */
    ranges = <0x00 0x00 0x00 0x82010000 0x00 0xe8000000 0x00 0x2000000
              0x01 0x00 0x00 0x82010000 0x00 0xea000000 0x00 0x1000000
              0x02 0x00 0x00 0x82010000 0x00 0xeb000000 0x00 0x800000
              0x03 0x00 0x00 0x82010000 0x00 0xeb800000 0x00 0x800000
              0x04 0x00 0x00 0x82010000 0x00 0xec000000 0x00 0x20000
              0x05 0x00 0x00 0x82010000 0x00 0xec020000 0x00 0x2000>;
    ...
    pci-ep-bus@0 {
      #address-cells = <0x01>;
      #size-cells = <0x01>;
      compatible = "simple-bus";
      /* Translate 0xe2000000 to BAR0 and 0xe0000000 to BAR1 */
      ranges = <0xe2000000 0x00 0x00 0x00 0x2000000
                0xe0000000 0x01 0x00 0x00 0x1000000>;
      ...
    };
  };
};

During the translation process, the "default-flags" map() function is
used to select the matching item in the ranges table and determine the
address offset from this matching item.
This map() function simply calls of_read_number() and when address-size
is greater than 2, the map() function skips the extra high address part
(ie part over 64bit). This lead to a wrong matching item and a wrong
offset computation.
Also during the translation itself, the extra high part related to the
parent address is not present in the translated address.

Fix the "default-flags" map() and translate() in order to take into
account the child extra high address part in map() and the parent extra
high address part in translate() and so having a correct address
translation for ranges patterns such as the one given in the example
above.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231017110221.189299-2-herve.codina@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: kunit: initialize lock for fake ec_dev

[ Upstream commit e410b4ade83d06a046f6e32b5085997502ba0559 ]

cros_ec_cmd_xfer() uses ec_dev->lock.  Initialize it.

Otherwise, dmesg shows the following:
> DEBUG_LOCKS_WARN_ON(lock->magic != lock)
> ...
> Call Trace:
>  ? __mutex_lock
>  ? __warn
>  ? __mutex_lock
>  ...
>  ? cros_ec_cmd_xfer

Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20231003080504.4011337-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: acpi: Add a ignore interrupt quirk for Peaq C1010

[ Upstream commit 6cc64f6173751d212c9833bde39e856b4f585a3e ]

On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
a "dolby" button. At the ACPI level an _AEI event-handler
is connected which sets an ACPI variable to 1 on both
edges. This variable can be polled + cleared to 0 using WMI.

Since the variable is set on both edges the WMI interface is pretty
useless even when polling. So instead of writing a custom WMI
driver for this the x86-android-tablets code instantiates
a gpio-keys platform device for the "dolby" button.

Add an ignore_interrupt quirk for INT33FC:00 pin 3 on the Peaq C1010,
so that it is not seen as busy when the gpio-keys driver requests it.

Note this replaces a hack in x86-android-tablets where it would
call acpi_gpiochip_free_interrupts() on the INT33FC:00 GPIO
controller. acpi_gpiochip_free_interrupts() is considered private
(internal) gpiolib API so x86-android-tablets should stop using it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tsnep: Fix tsnep_request_irq() format-overflow warning

[ Upstream commit 00e984cb986b31e9313745e51daceaa1e1eb7351 ]

Compiler warns about a possible format-overflow in tsnep_request_irq():
drivers/net/ethernet/engleder/tsnep_main.c:884:55: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
                         sprintf(queue->name, "%s-rx-%d", name,
                                                       ^
drivers/net/ethernet/engleder/tsnep_main.c:881:55: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
                         sprintf(queue->name, "%s-tx-%d", name,
                                                       ^
drivers/net/ethernet/engleder/tsnep_main.c:878:49: warning: '-txrx-' directive writing 6 bytes into a region of size between 5 and 25 [-Wformat-overflow=]
                         sprintf(queue->name, "%s-txrx-%d", name,
                                                 ^~~~~~

Actually overflow cannot happen. Name is limited to IFNAMSIZ, because
netdev_name() is called during ndo_open(). queue_index is single char,
because less than 10 queues are supported.

Fix warning with snprintf(). Additionally increase buffer to 32 bytes,
because those 7 additional bytes were unused anyway.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310182028.vmDthIUa-lkp@intel.com/
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023183856.58373-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: EC: Add quirk for HP 250 G7 Notebook PC

[ Upstream commit 891ddc03e2f4395e24795596e032f57d5ab37fe7 ]

Add GPE quirk entry for HP 250 G7 Notebook PC.

This change allows the lid switch to be identified as the lid switch
and not a keyboard button. With the lid switch properly identified, the
device triggers suspend correctly on lid close.

Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix double free in hci_conn_cleanup

[ Upstream commit a85fb91e3d728bdfc80833167e8162cce8bc7004 ]

syzbot reports a slab use-after-free in hci_conn_hash_flush [1].
After releasing an object using hci_conn_del_sysfs in the
hci_conn_cleanup function, releasing the same object again
using the hci_dev_put and hci_conn_put functions causes a double free.
Here's a simplified flow:

hci_conn_del_sysfs:
  hci_dev_put
    put_device
      kobject_put
        kref_put
          kobject_release
            kobject_cleanup
              kfree_const
                kfree(name)

hci_dev_put:
  ...
    kfree(name)

hci_conn_put:
  put_device
    ...
      kfree(name)

This patch drop the hci_dev_put and hci_conn_put function
call in hci_conn_cleanup function, because the object is
freed in hci_conn_del_sysfs function.

This patch also fixes the refcounting in hci_conn_add_sysfs() and
hci_conn_del_sysfs() to take into account device_add() failures.

This fixes CVE-2023-28464.

Link: https://syzkaller.appspot.com/bug?id=1bb51491ca5df96a5f724899d1dbb87afda61419
Signed-off-by: ZhengHan Wang <wzhmmmmm@gmail.com>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Add date->evt_skb is NULL check

[ Upstream commit 624820f7c8826dd010e8b1963303c145f99816e9 ]

fix crash because of null pointers

[ 6104.969662] BUG: kernel NULL pointer dereference, address: 00000000000000c8
[ 6104.969667] #PF: supervisor read access in kernel mode
[ 6104.969668] #PF: error_code(0x0000) - not-present page
[ 6104.969670] PGD 0 P4D 0
[ 6104.969673] Oops: 0000 [#1] SMP NOPTI
[ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb]
[ 6104.969688] RSP: 0018:ffffb8d681533d48 EFLAGS: 00010246
[ 6104.969689] RAX: 0000000000000000 RBX: ffff8ad560bb2000 RCX: 0000000000000006
[ 6104.969691] RDX: 0000000000000000 RSI: ffffb8d681533d08 RDI: 0000000000000000
[ 6104.969692] RBP: ffffb8d681533d70 R08: 0000000000000001 R09: 0000000000000001
[ 6104.969694] R10: 0000000000000001 R11: 00000000fa83b2da R12: ffff8ad461d1d7c0
[ 6104.969695] R13: 0000000000000000 R14: ffff8ad459618c18 R15: ffffb8d681533d90
[ 6104.969697] FS:  00007f5a1cab9d40(0000) GS:ffff8ad578200000(0000) knlGS:00000
[ 6104.969699] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6104.969700] CR2: 00000000000000c8 CR3: 000000018620c001 CR4: 0000000000760ef0
[ 6104.969701] PKRU: 55555554
[ 6104.969702] Call Trace:
[ 6104.969708]  btusb_mtk_shutdown+0x44/0x80 [btusb]
[ 6104.969732]  hci_dev_do_close+0x470/0x5c0 [bluetooth]
[ 6104.969748]  hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 6104.969753]  rfkill_set_block+0x92/0x160
[ 6104.969755]  rfkill_fop_write+0x136/0x1e0
[ 6104.969759]  __vfs_write+0x18/0x40
[ 6104.969761]  vfs_write+0xdf/0x1c0
[ 6104.969763]  ksys_write+0xb1/0xe0
[ 6104.969765]  __x64_sys_write+0x1a/0x20
[ 6104.969769]  do_syscall_64+0x51/0x180
[ 6104.969771]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 6104.969773] RIP: 0033:0x7f5a21f18fef
[ 6104.9] RSP: 002b:00007ffeefe39010 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[ 6104.969780] RAX: ffffffffffffffda RBX: 000055c10a7560a0 RCX: 00007f5a21f18fef
[ 6104.969781] RDX: 0000000000000008 RSI: 00007ffeefe39060 RDI: 0000000000000012
[ 6104.969782] RBP: 00007ffeefe39060 R08: 0000000000000000 R09: 0000000000000017
[ 6104.969784] R10: 00007ffeefe38d97 R11: 0000000000000293 R12: 0000000000000002
[ 6104.969785] R13: 00007ffeefe39220 R14: 00007ffeefe391a0 R15: 000055c10a72acf0

Signed-off-by: youwan Wang <wangyouwan@126.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix size check for fw_link_id

[ Upstream commit e25bd1853cc8308158d97e5b3696ea3689fa0840 ]

Check that fw_link_id does not exceed the size of link_id_to_link_conf
array. There's no any codepath that can cause that, but it's still
safer to verify in case fw_link_id gets corrupted.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.3385bd11f423.I2d30fdb464f951c648217553c47901857a0046c7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Ensure proper register state printing for cond jumps

[ Upstream commit 1a8a315f008a58f54fecb012b928aa6a494435b3 ]

Verifier emits relevant register state involved in any given instruction
next to it after `;` to the right, if possible. Or, worst case, on the
separate line repeating instruction index.

E.g., a nice and simple case would be:

  2: (d5) if r0 s<= 0x0 goto pc+1       ; R0_w=0

But if there is some intervening extra output (e.g., precision
backtracking log) involved, we are supposed to see the state after the
precision backtrack log:

  4: (75) if r0 s>= 0x0 goto pc+1
  mark_precise: frame0: last_idx 4 first_idx 0 subseq_idx -1
  mark_precise: frame0: regs=r0 stack= before 2: (d5) if r0 s<= 0x0 goto pc+1
  mark_precise: frame0: regs=r0 stack= before 1: (b7) r0 = 0
  6: R0_w=0

First off, note that in `6: R0_w=0` instruction index corresponds to the
next instruction, not to the conditional jump instruction itself, which
is wrong and we'll get to that.

But besides that, the above is a happy case that does work today. Yet,
if it so happens that precision backtracking had to traverse some of the
parent states, this `6: R0_w=0` state output would be missing.

This is due to a quirk of print_verifier_state() routine, which performs
mark_verifier_state_clean(env) at the end. This marks all registers as
"non-scratched", which means that subsequent logic to print *relevant*
registers (that is, "scratched ones") fails and doesn't see anything
relevant to print and skips the output altogether.

print_verifier_state() is used both to print instruction context, but
also to print an **entire** verifier state indiscriminately, e.g.,
during precision backtracking (and in a few other situations, like
during entering or exiting subprogram).  Which means if we have to print
entire parent state before getting to printing instruction context
state, instruction context is marked as clean and is omitted.

Long story short, this is definitely not intentional. So we fix this
behavior in this patch by teaching print_verifier_state() to clear
scratch state only if it was used to print instruction state, not the
parent/callback state. This is determined by print_all option, so if
it's not set, we don't clear scratch state. This fixes missing
instruction state for these cases.

As for the mismatched instruction index, we fix that by making sure we
call print_insn_state() early inside check_cond_jmp_op() before we
adjusted insn_idx based on jump branch taken logic. And with that we get
desired correct information:

  9: (16) if w4 == 0x1 goto pc+9
  mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1
  mark_precise: frame0: parent state regs=r4 stack=: R2_w=1944 R4_rw=P1 R10=fp0
  mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx 9
  mark_precise: frame0: regs=r4 stack= before 8: (66) if w4 s> 0x3 goto pc+5
  mark_precise: frame0: regs=r4 stack= before 7: (b7) r4 = 1
  9: R4=1

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-6-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock: read from socket's error queue

[ Upstream commit 49dbe25adac42d3e06f65d1420946bec65896222 ]

This adds handling of MSG_ERRQUEUE input flag in receive call. This flag
is used to read socket's error queue instead of data queue. Possible
scenario of error queue usage is receiving completions for transmission
with MSG_ZEROCOPY flag. This patch also adds new defines: 'SOL_VSOCK'
and 'VSOCK_RECVERR'.

Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfp: add quirk for FS's 2.5G copper SFP

[ Upstream commit e27aca3760c08b7b05aea71068bd609aa93e7b35 ]

Add a quirk for a copper SFP that identifies itself as "FS" "SFP-2.5G-T".
This module's PHY is inaccessible, and can only run at 2500base-X with the
host without negotiation. Add a quirk to enable the 2500base-X interface mode
with 2500base-T support and disable auto negotiation.

Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Link: https://lore.kernel.org/r/20230925080059.266240-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath10k: Don't touch the CE interrupt registers after power up

[ Upstream commit 170c75d43a77dc937c58f07ecf847ba1b42ab74e ]

As talked about in commit d66d24ac300c ("ath10k: Keep track of which
interrupts fired, don't poll them"), if we access the copy engine
register at a bad time then ath10k can go boom. However, it's not
necessarily easy to know when it's safe to access them.

The ChromeOS test labs saw a crash that looked like this at
shutdown/reboot time (on a chromeos-5.15 kernel, but likely the
problem could also reproduce upstream):

Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
...
CPU: 4 PID: 6168 Comm: reboot Not tainted 5.15.111-lockdep-19350-g1d624fe6758f #1 010b9b233ab055c27c6dc88efb0be2f4e9e86f51
Hardware name: Google Kingoftown (DT)
...
pc : ath10k_snoc_read32+0x50/0x74 [ath10k_snoc]
lr : ath10k_snoc_read32+0x24/0x74 [ath10k_snoc]
...
Call trace:
ath10k_snoc_read32+0x50/0x74 [ath10k_snoc ...]
ath10k_ce_disable_interrupt+0x190/0x65c [ath10k_core ...]
ath10k_ce_disable_interrupts+0x8c/0x120 [ath10k_core ...]
ath10k_snoc_hif_stop+0x78/0x660 [ath10k_snoc ...]
ath10k_core_stop+0x13c/0x1ec [ath10k_core ...]
ath10k_halt+0x398/0x5b0 [ath10k_core ...]
ath10k_stop+0xfc/0x1a8 [ath10k_core ...]
drv_stop+0x148/0x6b4 [mac80211 ...]
ieee80211_stop_device+0x70/0x80 [mac80211 ...]
ieee80211_do_stop+0x10d8/0x15b0 [mac80211 ...]
ieee80211_stop+0x144/0x1a0 [mac80211 ...]
__dev_close_many+0x1e8/0x2c0
dev_close_many+0x198/0x33c
dev_close+0x140/0x210
cfg80211_shutdown_all_interfaces+0xc8/0x1e0 [cfg80211 ...]
ieee80211_remove_interfaces+0x118/0x5c4 [mac80211 ...]
ieee80211_unregister_hw+0x64/0x1f4 [mac80211 ...]
ath10k_mac_unregister+0x4c/0xf0 [ath10k_core ...]
ath10k_core_unregister+0x80/0xb0 [ath10k_core ...]
ath10k_snoc_free_resources+0xb8/0x1ec [ath10k_snoc ...]
ath10k_snoc_shutdown+0x98/0xd0 [ath10k_snoc ...]
platform_shutdown+0x7c/0xa0
device_shutdown+0x3e0/0x58c
kernel_restart_prepare+0x68/0xa0
kernel_restart+0x28/0x7c

Though there's no known way to reproduce the problem, it makes sense
that it would be the same issue where we're trying to access copy
engine registers when it's not allowed.

Let's fix this by changing how we "disable" the interrupts. Instead of
tweaking the copy engine registers we'll just use disable_irq() and
enable_irq(). Then we'll configure the interrupts once at power up
time.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230630151842.1.If764ede23c4e09a43a842771c2ddf99608f25f8e@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath12k: mhi: fix potential memory leak in ath12k_mhi_register()

[ Upstream commit 47c27aa7ded4b8ead19b3487cc42a6185b762903 ]

mhi_alloc_controller() allocates a memory space for mhi_ctrl. When some
errors occur, mhi_ctrl should be freed by mhi_free_controller() and set
ab_pci->mhi_ctrl = NULL.

We can fix it by calling mhi_free_controller() when the failure happens
and set ab_pci->mhi_ctrl = NULL in all of the places where we call
mhi_free_controller().

Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230922021036.3604157-1-make_ruc2021@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: annotate data-races around sk->sk_dst_pending_confirm

[ Upstream commit eb44ad4e635132754bfbcb18103f1dcb7058aedd ]

This field can be read or written without socket lock being held.

Add annotations to avoid load-store tearing.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: annotate data-races around sk->sk_tx_queue_mapping

[ Upstream commit 0bb4d124d34044179b42a769a0c76f389ae973b6 ]

This field can be read or written without socket lock being held.

Add annotations to avoid load-store tearing.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: fix clang-specific fortify warnings

[ Upstream commit 03f0e11da7fb26db4f27e6b83a223512db9f7ca5 ]

When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):

In file included from drivers/net/wireless/mediatek/mt76/mt792x_core.c:4:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
                        __read_overflow2_field(q_size_field, size);

In file included from drivers/net/wireless/mediatek/mt76/mt7915/main.c:4:
In file included from ./include/linux/etherdevice.h:20:
In file included from ./include/linux/if_ether.h:19:
In file included from ./include/linux/skbuff.h:15:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
                        __read_overflow2_field(q_size_field, size);

In file included from drivers/net/wireless/mediatek/mt76/mt7996/main.c:6:
In file included from drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h:9:
In file included from ./include/linux/interrupt.h:8:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
                        __read_overflow2_field(q_size_field, size);

The compiler actually complains on 'mt7915_get_et_strings()',
'mt792x_get_et_strings()' and 'mt7996_get_et_strings()' due to the same
reason: fortification logic inteprets call to 'memcpy()' as an attempt
to copy the whole array from its first member and so issues an overread
warning. These warnings may be silenced by passing an address of the whole
array and not the first member to 'memcpy()'.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7921e: Support MT7992 IP in Xiaomi Redmibook 15 Pro (2023)

[ Upstream commit fce9c967820a72f600abbf061d7077861685a14d ]

In the Xiaomi Redmibook 15 Pro (2023) laptop I have got, a wifi chip is
used, which according to its PCI Vendor ID is from "ITTIM Technology".

This chip works flawlessly with the mt7921e module. The driver doesn't
bind to this PCI device, because the Vendor ID from "ITTIM Technology" is
not recognized.

This patch adds the PCI Vendor ID from "ITTIM Technology" to the list of
PCI Vendor IDs and lets the mt7921e driver bind to the mentioned wifi
chip.

Signed-off-by: Ingo Rohloff <lundril@gmx.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfp: add quirk for Fiberstone GPON-ONU-34-20BI

[ Upstream commit d387e34fec407f881fdf165b5d7ec128ebff362f ]

Fiberstone GPON-ONU-34-20B can operate at 2500base-X, but report 1.2GBd
NRZ in their EEPROM.

The module also require the ignore tx fault fixup similar to Huawei MA5671A
as it gets disabled on error messages with serial redirection enabled.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20230919124720.8210-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: APEI: Fix AER info corruption when error status data has multiple sections

[ Upstream commit e2abc47a5a1a9f641e7cacdca643fdd40729bf6e ]

ghes_handle_aer() passes AER data to the PCI core for logging and
recovery by calling aer_recover_queue() with a pointer to struct
aer_capability_regs.

The problem was that aer_recover_queue() queues the pointer directly
without copying the aer_capability_regs data. The pointer was to
the ghes->estatus buffer, which could be reused before
aer_recover_work_func() reads the data.

To avoid this problem, allocate a new aer_capability_regs structure
from the ghes_estatus_pool, copy the AER data from the ghes->estatus
buffer into it, pass a pointer to the new struct to
aer_recover_queue(), and free it after aer_recover_work_func() has
processed it.

Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath12k: fix possible out-of-bound write in ath12k_wmi_ext_hal_reg_caps()

[ Upstream commit b302dce3d9edea5b93d1902a541684a967f3c63c ]

reg_cap.phy_id is extracted from WMI event and could be an unexpected value
in case some errors happen. As a result out-of-bound write may occur to
soc->hal_reg_cap. Fix it by validating reg_cap.phy_id before using it.

This is found during code review.

Compile tested only.

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230830020716.5420-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath10k: fix clang-specific fortify warning

[ Upstream commit cb4c132ebfeac5962f7258ffc831caa0c4dada1a ]

When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):

In file included from drivers/net/wireless/ath/ath10k/debug.c:8:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);

The compiler actually complains on 'ath10k_debug_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy
the whole 'ath10k_gstrings_stats' array from it's first member and so
issues an overread warning. This warning may be silenced by passing
an address of the whole array and not the first member to 'memcpy()'.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230829093652.234537-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath12k: fix possible out-of-bound read in ath12k_htt_pull_ppdu_stats()

[ Upstream commit 1bc44a505a229bb1dd4957e11aa594edeea3690e ]

len is extracted from HTT message and could be an unexpected value in
case errors happen, so add validation before using to avoid possible
out-of-bound read in the following message iteration and parsing.

The same issue also applies to ppdu_info->ppdu_stats.common.num_users,
so validate it before using too.

These are found during code review.

Compile test only.

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230901015602.45112-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: fix clang-specific fortify warnings

[ Upstream commit 95f97fe0ac974467ab4da215985a32b2fdf48af0 ]

When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):

In file included from drivers/net/wireless/ath/ath9k/debug.c:17:
In file included from ./include/linux/slab.h:16:
In file included from ./include/linux/gfp.h:7:
In file included from ./include/linux/mmzone.h:8:
In file included from ./include/linux/spinlock.h:56:
In file included from ./include/linux/preempt.h:79:
In file included from ./arch/x86/include/asm/preempt.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/x86/include/asm/thread_info.h:53:
In file included from ./arch/x86/include/asm/cpufeature.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);

In file included from drivers/net/wireless/ath/ath9k/htc_drv_debug.c:17:
In file included from drivers/net/wireless/ath/ath9k/htc.h:20:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);

The compiler actually complains on 'ath9k_get_et_strings()' and
'ath9k_htc_get_et_strings()' due to the same reason: fortification logic
inteprets call to 'memcpy()' as an attempt to copy the whole array from
it's first member and so issues an overread warning. These warnings may
be silenced by passing an address of the whole array and not the first
member to 'memcpy()'.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230829093856.234584-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Detect IP == ksym.end as part of BPF program

[ Upstream commit 66d9111f3517f85ef2af0337ece02683ce0faf21 ]

Now that bpf_throw kfunc is the first such call instruction that has
noreturn semantics within the verifier, this also kicks in dead code
elimination in unprecedented ways. For one, any instruction following
a bpf_throw call will never be marked as seen. Moreover, if a callchain
ends up throwing, any instructions after the call instruction to the
eventually throwing subprog in callers will also never be marked as
seen.

The tempting way to fix this would be to emit extra 'int3' instructions
which bump the jited_len of a program, and ensure that during runtime
when a program throws, we can discover its boundaries even if the call
instruction to bpf_throw (or to subprogs that always throw) is emitted
as the final instruction in the program.

An example of such a program would be this:

do_something():
...
r0 = 0
exit

foo():
r1 = 0
call bpf_throw
r0 = 0
exit

bar(cond):
if r1 != 0 goto pc+2
call do_something
exit
call foo
r0 = 0 // Never seen by verifier
exit //

main(ctx):
r1 = ...
call bar
r0 = 0
exit

Here, if we do end up throwing, the stacktrace would be the following:

bpf_throw
foo
bar
main

In bar, the final instruction emitted will be the call to foo, as such,
the return address will be the subsequent instruction (which the JIT
emits as int3 on x86). This will end up lying outside the jited_len of
the program, thus, when unwinding, we will fail to discover the return
address as belonging to any program and end up in a panic due to the
unreliable stack unwinding of BPF programs that we never expect.

To remedy this case, make bpf_prog_ksym_find treat IP == ksym.end as
part of the BPF program, so that is_bpf_text_address returns true when
such a case occurs, and we are able to unwind reliably when the final
instruction ends up being a call instruction.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-12-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atl1c: Work around the DMA RX overflow issue

[ Upstream commit 86565682e9053e5deb128193ea9e88531bbae9cf ]

This is based on alx driver commit 881d0327db37 ("net: alx: Work around
the DMA RX overflow issue").

The alx and atl1c drivers had RX overflow error which was why a custom
allocator was created to avoid certain addresses. The simpler workaround
then created for alx driver, but not for atl1c due to lack of tester.

Instead of using a custom allocator, check the allocated skb address and
use skb_reserve() to move away from problematic 0x...fc0 address.

Tested on AR8131 on Acer 4540.

Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com>
Link: https://lore.kernel.org/r/20230912010711.12036-1-liew.s.piaw@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: don't return unset power in ieee80211_get_tx_power()

[ Upstream commit e160ab85166e77347d0cbe5149045cb25e83937f ]

We can get a UBSAN warning if ieee80211_get_tx_power() returns the
INT_MIN value mac80211 internally uses for "unset power level".

UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5
-2147483648 * 100 cannot be represented in type 'int'
CPU: 0 PID: 20433 Comm: insmod Tainted: G        WC OE
Call Trace:
  dump_stack+0x74/0x92
  ubsan_epilogue+0x9/0x50
  handle_overflow+0x8d/0xd0
  __ubsan_handle_mul_overflow+0xe/0x10
  nl80211_send_iface+0x688/0x6b0 [cfg80211]
  [...]
  cfg80211_register_wdev+0x78/0xb0 [cfg80211]
  cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211]
  [...]
  ieee80211_if_add+0x60e/0x8f0 [mac80211]
  ieee80211_register_hw+0xda5/0x1170 [mac80211]

In this case, simply return an error instead, to indicate
that no data is available.

Cc: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230203023636.4418-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211_hwsim: fix clang-specific fortify warning

[ Upstream commit cbaccdc42483c65016f1bae89128c08dc17cfb2a ]

When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):

In file included from drivers/net/wireless/virtual/mac80211_hwsim.c:18:
In file included from ./include/linux/slab.h:16:
In file included from ./include/linux/gfp.h:7:
In file included from ./include/linux/mmzone.h:8:
In file included from ./include/linux/spinlock.h:56:
In file included from ./include/linux/preempt.h:79:
In file included from ./arch/x86/include/asm/preempt.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/x86/include/asm/thread_info.h:53:
In file included from ./arch/x86/include/asm/cpufeature.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);

The compiler actually complains on 'mac80211_hwsim_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy the
whole 'mac80211_hwsim_gstrings_stats' array from its first member and so
issues an overread warning. This warning may be silenced by passing
an address of the whole array and not the first member to 'memcpy()'.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20230829094140.234636-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath12k: Ignore fragments from uninitialized peer in dp

[ Upstream commit bbc86757ca62423c3b6bd8f7176da1ff43450769 ]

When max virtual ap interfaces are configured in all the bands with
ACS and hostapd restart is done every 60s, a crash is observed at
random times.

In the above scenario, a fragmented packet is received for self peer,
for which rx_tid and rx_frags are not initialized in datapath.
While handling this fragment, crash is observed as the rx_frag list
is uninitialized and when we walk in ath12k_dp_rx_h_sort_frags,
skb null leads to exception.

To address this, before processing received fragments we check
dp_setup_done flag is set to ensure that peer has completed its
dp peer setup for fragment queue, else ignore processing the
fragments.

Call trace:
    PC points to "ath12k_dp_process_rx_err+0x4e8/0xfcc [ath12k]"
    LR points to "ath12k_dp_process_rx_err+0x480/0xfcc [ath12k]".
    The Backtrace obtained is as follows:
    ath12k_dp_process_rx_err+0x4e8/0xfcc [ath12k]
    ath12k_dp_service_srng+0x78/0x260 [ath12k]
    ath12k_pci_write32+0x990/0xb0c [ath12k]
    __napi_poll+0x30/0xa4
    net_rx_action+0x118/0x270
    __do_softirq+0x10c/0x244
    irq_exit+0x64/0xb4
    __handle_domain_irq+0x88/0xac
    gic_handle_irq+0x74/0xbc
    el1_irq+0xf0/0x1c0
    arch_cpu_idle+0x10/0x18
    do_idle+0x104/0x248
    cpu_startup_entry+0x20/0x64
    rest_init+0xd0/0xdc
    arch_call_rest_init+0xc/0x14

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230821130343.29495-2-quic_hprem@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: plfxlc: fix clang-specific fortify warning

[ Upstream commit a763e92c78615ea838f5b9a841398b1d4adb968e ]

When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):

In file included from drivers/net/wireless/purelifi/plfxlc/mac.c:6:
In file included from ./include/linux/netdevice.h:24:
In file included from ./include/linux/timer.h:6:
In file included from ./include/linux/ktime.h:24:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);

The compiler actually complains on 'plfxlc_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy
the whole 'et_strings' array from its first member and so issues an
overread warning. This warning may be silenced by passing an address
of the whole array and not the first member to 'memcpy()'.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230829094541.234751-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size

[ Upstream commit a1e2b8b36820d8c91275f207e77e91645b7c6836 ]

Qi Zheng reported crashes in a production environment and provided a
simplified example as a reproducer:

|  For example, if we use Qemu to start a two NUMA node kernel,
|  one of the nodes has 2M memory (less than NODE_MIN_SIZE),
|  and the other node has 2G, then we will encounter the
|  following panic:
|
|    BUG: kernel NULL pointer dereference, address: 0000000000000000
|    <...>
|    RIP: 0010:_raw_spin_lock_irqsave+0x22/0x40
|    <...>
|    Call Trace:
|      <TASK>
|      deactivate_slab()
|      bootstrap()
|      kmem_cache_init()
|      start_kernel()
|      secondary_startup_64_no_verify()

The crashes happen because of inconsistency between the nodemask that
has nodes with less than 4MB as memoryless, and the actual memory fed
into the core mm.

The commit:

  9391a3f9c7f1 ("[PATCH] x86_64: Clear more state when ignoring empty node in SRAT parsing")

... that introduced minimal size of a NUMA node does not explain why
a node size cannot be less than 4MB and what boot failures this
restriction might fix.

Fixes have been submitted to the core MM code to tighten up the
memory topologies it accepts and to not crash on weird input:

  mm: page_alloc: skip memoryless nodes entirely
  mm: memory_hotplug: drop memoryless node from fallback lists

Andrew has accepted them into the -mm tree, but there are no
stable SHA1's yet.

This patch drops the limitation for minimal node size on x86:

  - which works around the crash without the fixes to the core MM.
  - makes x86 topologies less weird,
  - removes an arbitrary and undocumented limitation on NUMA topologies.

[ mingo: Improved changelog clarity. ]

Reported-by: Qi Zheng <zhengqi.arch@bytedance.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/ZS+2qqjEO5/867br@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

workqueue: Provide one lock class key per work_on_cpu() callsite

[ Upstream commit 265f3ed077036f053981f5eea0b5b43e7c5b39ff ]

All callers of work_on_cpu() share the same lock class key for all the
functions queued. As a result the workqueue related locking scenario for
a function A may be spuriously accounted as an inversion against the
locking scenario of function B such as in the following model:

long A(void *arg)
{
mutex_lock(&mutex);
mutex_unlock(&mutex);
}

long B(void *arg)
{
}

void launchA(void)
{
work_on_cpu(0, A, NULL);
}

void launchB(void)
{
mutex_lock(&mutex);
work_on_cpu(1, B, NULL);
mutex_unlock(&mutex);
}

launchA and launchB running concurrently have no chance to deadlock.
However the above can be reported by lockdep as a possible locking
inversion because the works containing A() and B() are treated as
belonging to the same locking class.

The following shows an existing example of such a spurious lockdep splat:

======================================================
WARNING: possible circular locking dependency detected
6.6.0-rc1-00065-g934ebd6e5359 #35409 Not tainted
------------------------------------------------------
kworker/0:1/9 is trying to acquire lock:
ffffffff9bc72f30 (cpu_hotplug_lock){++++}-{0:0}, at: _cpu_down+0x57/0x2b0

but task is already holding lock:
ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
__flush_work+0x83/0x4e0
work_on_cpu+0x97/0xc0
rcu_nocb_cpu_offload+0x62/0xb0
rcu_nocb_toggle+0xd0/0x1d0
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30

-> #1 (rcu_state.barrier_mutex){+.+.}-{3:3}:
__mutex_lock+0x81/0xc80
rcu_nocb_cpu_deoffload+0x38/0xb0
rcu_nocb_toggle+0x144/0x1d0
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30

-> #0 (cpu_hotplug_lock){++++}-{0:0}:
__lock_acquire+0x1538/0x2500
lock_acquire+0xbf/0x2a0
percpu_down_write+0x31/0x200
_cpu_down+0x57/0x2b0
__cpu_down_maps_locked+0x10/0x20
work_for_cpu_fn+0x15/0x20
process_scheduled_works+0x2a7/0x500
worker_thread+0x173/0x330
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30

other info that might help us debug this:

Chain exists of:
   cpu_hotplug_lock --> rcu_state.barrier_mutex --> (work_completion)(&wfc.work)

  Possible unsafe locking scenario:

CPU0                    CPU1
----                    ----
   lock((work_completion)(&wfc.work));
lock(rcu_state.barrier_mutex);
lock((work_completion)(&wfc.work));
   lock(cpu_hotplug_lock);

  *** DEADLOCK ***

2 locks held by kworker/0:1/9:
  #0: ffff900481068b38 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x212/0x500
  #1: ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500

stack backtrace:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.0-rc1-00065-g934ebd6e5359 #35409
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Workqueue: events work_for_cpu_fn
Call Trace:
rcu-torture: rcu_torture_read_exit: Start of episode
  <TASK>
  dump_stack_lvl+0x4a/0x80
  check_noncircular+0x132/0x150
  __lock_acquire+0x1538/0x2500
  lock_acquire+0xbf/0x2a0
  ? _cpu_down+0x57/0x2b0
  percpu_down_write+0x31/0x200
  ? _cpu_down+0x57/0x2b0
  _cpu_down+0x57/0x2b0
  __cpu_down_maps_locked+0x10/0x20
  work_for_cpu_fn+0x15/0x20
  process_scheduled_works+0x2a7/0x500
  worker_thread+0x173/0x330
  ? __pfx_worker_thread+0x10/0x10
  kthread+0xe6/0x120
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x2f/0x40
  ? __pfx_kthread+0x10/0x10
  ret_from_fork_asm+0x1b/0x30
  </TASK

Fix this with providing one lock class key per work_on_cpu() caller.

Reported-and-tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpu/hotplug: Don't offline the last non-isolated CPU

[ Upstream commit 38685e2a0476127db766f81b1c06019ddc4c9ffa ]

If a system has isolated CPUs via the "isolcpus=" command line parameter,
then an attempt to offline the last housekeeping CPU will result in a
WARN_ON() when rebuilding the scheduler domains and a subsequent panic due
to and unhandled empty CPU mas in partition_sched_domains_locked().

cpuset_hotplug_workfn()
  rebuild_sched_domains_locked()
    ndoms = generate_sched_domains(&doms, &attr);
      cpumask_and(doms[0], top_cpuset.effective_cpus, housekeeping_cpumask(HK_FLAG_DOMAIN));

Thus results in an empty CPU mask which triggers the warning and then the
subsequent crash:

WARNING: CPU: 4 PID: 80 at kernel/sched/topology.c:2366 build_sched_domains+0x120c/0x1408
Call trace:
build_sched_domains+0x120c/0x1408
partition_sched_domains_locked+0x234/0x880
rebuild_sched_domains_locked+0x37c/0x798
rebuild_sched_domains+0x30/0x58
cpuset_hotplug_workfn+0x2a8/0x930

Unable to handle kernel paging request at virtual address fffe80027ab37080
partition_sched_domains_locked+0x318/0x880
rebuild_sched_domains_locked+0x37c/0x798

Aside of the resulting crash, it does not make any sense to offline the last
last housekeeping CPU.

Prevent this by masking out the non-housekeeping CPUs when selecting a
target CPU for initiating the CPU unplug operation via the work queue.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/202310171709530660462@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

smp,csd: Throw an error if a CSD lock is stuck for too long

[ Upstream commit 94b3f0b5af2c7af69e3d6e0cdd9b0ea535f22186 ]

The CSD lock seems to get stuck in 2 "modes". When it gets stuck
temporarily, it usually gets released in a few seconds, and sometimes
up to one or two minutes.

If the CSD lock stays stuck for more than several minutes, it never
seems to get unstuck, and gradually more and more things in the system
end up also getting stuck.

In the latter case, we should just give up, so the system can dump out
a little more information about what went wrong, and, with panic_on_oops
and a kdump kernel loaded, dump a whole bunch more information about what
might have gone wrong. In addition, there is an smp.panic_on_ipistall
kernel boot parameter that by default retains the old behavior, but when
set enables the panic after the CSD lock has been stuck for more than
the specified number of milliseconds, as in 300,000 for five minutes.

[ paulmck: Apply Imran Khan feedback. ]
[ paulmck: Apply Leonardo Bras feedback. ]

Link: https://lore.kernel.org/lkml/bc7cc8b0-f587-4451-8bcd-0daae627bcc7@paulmck-laptop/
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Imran Khan <imran.f.khan@oracle.com>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

srcu: Only accelerate on enqueue time

[ Upstream commit 8a77f38bcd28d3c22ab7dd8eff3f299d43c00411 ]

Acceleration in SRCU happens on enqueue time for each new callback. This
operation is expected not to fail and therefore any similar attempt
from other places shouldn't find any remaining callbacks to accelerate.

Moreover accelerations performed beyond enqueue time are error prone
because rcu_seq_snap() then may return the snapshot for a new grace
period that is not going to be started.

Remove these dangerous and needless accelerations and introduce instead
assertions reporting leaking unaccelerated callbacks beyond enqueue
time.

Co-developed-by: Yong He <alexyonghe@tencent.com>
Signed-off-by: Yong He <alexyonghe@tencent.com>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Reviewed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/timer-atmel-tcb: Fix initialization on SAM9 hardware

[ Upstream commit 6d3bc4c02d59996d1d3180d8ed409a9d7d5900e0 ]

On SAM9 hardware two cascaded 16 bit timers are used to form a 32 bit
high resolution timer that is used as scheduler clock when the kernel
has been configured that way (CONFIG_ATMEL_CLOCKSOURCE_TCB).

The driver initially triggers a reset-to-zero of the two timers but this
reset is only performed on the next rising clock. For the first timer
this is ok - it will be in the next 60ns (16MHz clock). For the chained
second timer this will only happen after the first timer overflows, i.e.
after 2^16 clocks (~4ms with a 16MHz clock). So with other words the
scheduler clock resets to 0 after the first 2^16 clock cycles.

It looks like that the scheduler does not like this and behaves wrongly
over its lifetime, e.g. some tasks are scheduled with a long delay. Why
that is and if there are additional requirements for this behaviour has
not been further analysed.

There is a simple fix for resetting the second timer as well when the
first timer is reset and this is to set the ATMEL_TC_ASWTRG_SET bit in
the Channel Mode register (CMR) of the first timer. This will also rise
the TIOA line (clock input of the second timer) when a software trigger
respective SYNC is issued.

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231007161803.31342-1-rwahl@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/timer-imx-gpt: Fix potential memory leak

[ Upstream commit 8051a993ce222a5158bccc6ac22ace9253dd71cb ]

Fix coverity Issue CID 250382: Resource leak (RESOURCE_LEAK).
Add kfree when error return.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231009083922.1942971-1-ping.bai@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/lkdtm: Disable CONFIG_UBSAN_TRAP in test config

[ Upstream commit cf77bf698887c3b9ebed76dea492b07a3c2c7632 ]

The lkdtm selftest config fragment enables CONFIG_UBSAN_TRAP to make the
ARRAY_BOUNDS test kill the calling process when an out-of-bound access
is detected by UBSAN. However, after this [1] commit, UBSAN is triggered
under many new scenarios that weren't detected before, such as in struct
definitions with fixed-size trailing arrays used as flexible arrays. As
a result, CONFIG_UBSAN_TRAP=y has become a very aggressive option to
enable except for specific situations.

`make kselftest-merge` applies CONFIG_UBSAN_TRAP=y to the kernel config
for all selftests, which makes many of them fail because of system hangs
during boot.

This change removes the config option from the lkdtm kselftest and
configures the ARRAY_BOUNDS test to look for UBSAN reports rather than
relying on the calling process being killed.

[1] commit 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC")'

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230802063252.1917997-1-ricardo.canuelo@collabora.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

srcu: Fix srcu_struct node grpmask overflow on 64-bit systems

[ Upstream commit d8d5b7bf6f2105883bbd91bbd4d5b67e4e3dff71 ]

The value of a bitwise expression 1 << (cpu - sdp->mynode->grplo)
is subject to overflow due to a failure to cast operands to a larger
data type before performing the bitwise operation.

The maximum result of this subtraction is defined by the RCU_FANOUT_LEAF
Kconfig option, which on 64-bit systems defaults to 16 (resulting in a
maximum shift of 15), but which can be set up as high as 64 (resulting
in a maximum shift of 63). A value of 31 can result in sign extension,
resulting in 0xffffffff80000000 instead of the desired 0x80000000.
A value of 32 or greater triggers undefined behavior per the C standard.

This bug has not been known to cause issues because almost all kernels
take the default CONFIG_RCU_FANOUT_LEAF=16. Furthermore, as long as a
given compiler gives a deterministic non-zero result for 1<<N for N>=32,
the code correctly invokes all SRCU callbacks, albeit wasting CPU time
along the way.

This commit therefore substitutes the correct 1UL for the buggy 1.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/core: Bail out early if the request AUX area is out of bound

[ Upstream commit 54aee5f15b83437f23b2b2469bcf21bdd9823916 ]

When perf-record with a large AUX area, e.g 4GB, it fails with:

    #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1
    failed to mmap with 12 (Cannot allocate memory)

and it reveals a WARNING with __alloc_pages():

------------[ cut here ]------------
WARNING: CPU: 44 PID: 17573 at mm/page_alloc.c:5568 __alloc_pages+0x1ec/0x248
Call trace:
__alloc_pages+0x1ec/0x248
__kmalloc_large_node+0xc0/0x1f8
__kmalloc_node+0x134/0x1e8
rb_alloc_aux+0xe0/0x298
perf_mmap+0x440/0x660
mmap_region+0x308/0x8a8
do_mmap+0x3c0/0x528
vm_mmap_pgoff+0xf4/0x1b8
ksys_mmap_pgoff+0x18c/0x218
__arm64_sys_mmap+0x38/0x58
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0x58/0x188
do_el0_svc+0x34/0x50
el0_svc+0x34/0x108
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x1a4/0x1a8

'rb->aux_pages' allocated by kcalloc() is a pointer array which is used to
maintains AUX trace pages. The allocated page for this array is physically
contiguous (and virtually contiguous) with an order of 0..MAX_ORDER. If the
size of pointer array crosses the limitation set by MAX_ORDER, it reveals a
WARNING.

So bail out early with -ENOMEM if the request AUX area is out of bound,
e.g.:

    #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1
    failed to mmap with 12 (Cannot allocate memory)

Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/retpoline: Make sure there are no unconverted return thunks due to KCSAN

[ Upstream commit 2d7ce49f58dc95495b3e22e45d2be7de909b2c63 ]

Enabling CONFIG_KCSAN leads to unconverted, default return thunks to
remain after patching.

As David Kaplan describes in his debugging of the issue, it is caused by
a couple of KCSAN-generated constructors which aren't processed by
objtool:

  "When KCSAN is enabled, GCC generates lots of constructor functions
  named _sub_I_00099_0 which call __tsan_init and then return.  The
  returns in these are generally annotated normally by objtool and fixed
  up at runtime.  But objtool runs on vmlinux.o and vmlinux.o does not
  include a couple of object files that are in vmlinux, like
  init/version-timestamp.o and .vmlinux.export.o, both of which contain
  _sub_I_00099_0 functions.  As a result, the returns in these functions
  are not annotated, and the panic occurs when we call one of them in
  do_ctors and it uses the default return thunk.

  This difference can be seen by counting the number of these functions in the object files:
  $ objdump -d vmlinux.o|grep -c "<_sub_I_00099_0>:"
  2601
  $ objdump -d vmlinux|grep -c "<_sub_I_00099_0>:"
  2603

  If these functions are only run during kernel boot, there is no
  speculation concern."

Fix it by disabling KCSAN on version-timestamp.o and .vmlinux.export.o
so the extra functions don't get generated.  KASAN and GCOV are already
disabled for those files.

  [ bp: Massage commit message. ]

Closes: https://lore.kernel.org/lkml/20231016214810.GA3942238@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231017165946.v4i2d4exyqwqq3bx@treble
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/generic-radix-tree.c: Don't overflow in peek()

[ Upstream commit 9492261ff2460252cf2d8de89cdf854c7e2b28a0 ]

When we started spreading new inode numbers throughout most of the 64
bit inode space, that triggered some corner case bugs, in particular
some integer overflows related to the radix tree code. Oops.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: abort transaction on generation mismatch when marking eb as dirty

[ Upstream commit 50564b651d01c19ce732819c5b3c3fd60707188e ]

When marking an extent buffer as dirty, at btrfs_mark_buffer_dirty(),
we check if its generation matches the running transaction and if not we
just print a warning. Such mismatch is an indicator that something really
went wrong and only printing a warning message (and stack trace) is not
enough to prevent a corruption. Allowing a transaction to commit with such
an extent buffer will trigger an error if we ever try to read it from disk
due to a generation mismatch with its parent generation.

So abort the current transaction with -EUCLEAN if we notice a generation
mismatch. For this we need to pass a transaction handle to
btrfs_mark_buffer_dirty() which is always available except in test code,
in which case we can pass NULL since it operates on dummy extent buffers
and all test roots have a single node/leaf (root node at level 0).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/ww_mutex/test: Fix potential workqueue corruption

[ Upstream commit bccdd808902f8c677317cec47c306e42b93b849e ]

In some cases running with the test-ww_mutex code, I was seeing
odd behavior where sometimes it seemed flush_workqueue was
returning before all the work threads were finished.

Often this would cause strange crashes as the mutexes would be
freed while they were being used.

Looking at the code, there is a lifetime problem as the
controlling thread that spawns the work allocates the
"struct stress" structures that are passed to the workqueue
threads. Then when the workqueue threads are finished,
they free the stress struct that was passed to them.

Unfortunately the workqueue work_struct node is in the stress
struct. Which means the work_struct is freed before the work
thread returns and while flush_workqueue is waiting.

It seems like a better idea to have the controlling thread
both allocate and free the stress structures, so that we can
be sure we don't corrupt the workqueue by freeing the structure
prematurely.

So this patch reworks the test to do so, and with this change
I no longer see the early flush_workqueue returns.

Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230922043616.19282-3-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.6.2

Link: https://lore.kernel.org/r/20231115191613.097702445@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: make found_logical_ret parameter mandatory for function queue_scrub_stripe()

[ Upstream commit 47e2b06b7b5cb356a987ba3429550c3a89ea89d6 ]

[BUG]
There is a compilation warning reported on commit ae76d8e3e135 ("btrfs:
scrub: fix grouping of read IO"), where gcc (14.0.0 20231022 experimental)
is reporting the following uninitialized variable:

  fs/btrfs/scrub.c: In function ‘scrub_simple_mirror.isra’:
  fs/btrfs/scrub.c:2075:29: error: ‘found_logical’ may be used uninitialized [-Werror=maybe-uninitialized[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wmaybe-uninitialized]]
   2075 |                 cur_logical = found_logical + BTRFS_STRIPE_LEN;
  fs/btrfs/scrub.c:2040:21: note: ‘found_logical’ was declared here
   2040 |                 u64 found_logical;
        |                     ^~~~~~~~~~~~~

[CAUSE]
This is a false alert, as @found_logical is passed as parameter
@found_logical_ret of function queue_scrub_stripe().

As long as queue_scrub_stripe() returned 0, we would update
@found_logical_ret.  And if queue_scrub_stripe() returned >0 or <0, the
caller would not utilized @found_logical, thus there should be nothing
wrong.

Although the triggering gcc is still experimental, it looks like the
extra check on "if (found_logical_ret)" can sometimes confuse the
compiler.

Meanwhile the only caller of queue_scrub_stripe() is always passing a
valid pointer, there is no need for such check at all.

[FIX]
Although the report itself is a false alert, we can still make it more
explicit by:

- Replace the check for @found_logical_ret with ASSERT()

- Initialize @found_logical to U64_MAX

- Add one extra ASSERT() to make sure @found_logical got updated

Link: https://lore.kernel.org/linux-btrfs/87fs1x1p93.fsf@gentoo.org/
Fixes: ae76d8e3e135 ("btrfs: scrub: fix grouping of read IO")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: use u64 for buffer sizes in the tree search ioctls

[ Upstream commit dec96fc2dcb59723e041416b8dc53e011b4bfc2e ]

In the tree search v2 ioctl we use the type size_t, which is an unsigned
long, to track the buffer size in the local variable 'buf_size'. An
unsigned long is 32 bits wide on a 32 bits architecture. The buffer size
defined in struct btrfs_ioctl_search_args_v2 is a u64, so when we later
try to copy the local variable 'buf_size' to the argument struct, when
the search returns -EOVERFLOW, we copy only 32 bits which will be a
problem on big endian systems.

Fix this by using a u64 type for the buffer sizes, not only at
btrfs_ioctl_tree_search_v2(), but also everywhere down the call chain
so that we can use the u64 at btrfs_ioctl_tree_search_v2().

Fixes: cc68a8a5a433 ("btrfs: new ioctl TREE_SEARCH_V2")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/linux-btrfs/ce6f4bd6-9453-4ffe-ba00-cee35495e10f@moroto.mountain/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "mmc: core: Capture correct oemid-bits for eMMC cards"

commit 421b605edb1ce611dee06cf6fd9a1c1f2fd85ad0 upstream.

This reverts commit 84ee19bffc9306128cd0f1c650e89767079efeff.

The commit above made quirks with an OEMID fail to be applied, as they
were checking card->cid.oemid for the full 16 bits defined in MMC_FIXUP
macros but the field would only contain the bottom 8 bits.

eMMC v5.1A might have bogus values in OEMID's higher bits so another fix
will be made, but it has been decided to revert this until that is ready.

Fixes: 84ee19bffc93 ("mmc: core: Capture correct oemid-bits for eMMC cards")
Link: https://lkml.kernel.org/r/ZToJsSLHr8RnuTHz@codewreck.org
Link: https://lkml.kernel.org/r/CAPDyKFqkKibcXnwjnhc3+W1iJBHLeqQ9BpcZrSwhW2u9K2oUtg@mail.gmail.com
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Cc: stable@vger.kernel.org
Cc: Alex Fetters <Alex.Fetters@garmin.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103004220.1666641-1-asmadeus@codewreck.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI/ASPM: Disable only ASPM_STATE_L1 when driver, disables L1"

commit 3cb4f534bac010258b2688395c2f13459a932be9 upstream.

This reverts commit fb097dcd5a28c0a2325632405c76a66777a6bed9.

After fb097dcd5a28 ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"), disabling L1 via pci_disable_link_state(PCIE_LINK_STATE_L1),
then enabling one substate, e.g., L1.1, via sysfs actually enables *all*
the substates.

For example, r8169 disables L1 because of hardware issues on a number of
systems, which implicitly disables the L1.1 and L1.2 substates.

On some systems, L1 and L1.1 work fine, but L1.2 causes missed rx packets.
Enabling L1.1 via the sysfs "aspm_l1_1" attribute unexpectedly enables L1.2
as well as L1.1.

After fb097dcd5a28, pci_disable_link_state(PCIE_LINK_STATE_L1) adds only
ASPM_L1 (but not any of the L1.x substates) to the "aspm_disable" mask:

  --- Before fb097dcd5a28
  +++ After fb097dcd5a28

  # r8169 disables L1:
    pci_disable_link_state(PCIE_LINK_STATE_L1)
  -   disable |= ASPM_L1 | ASPM_L1_1 | ASPM_L1_2 | ...  # disable L1, L1.x
  +   disable |= ASPM_L1                                # disable L1 only

  # write "1" to sysfs "aspm_l1_1" attribute:
    l1_1_aspm
      aspm_attr_store_common(state = ASPM_L1_1)
        disable &= ~ASPM_L1_1              # enable L1.1
        if (state & (ASPM_L1_1 | ...))     # if enabling any substate
          disable &= ~ASPM_L1              # enable L1

  # final state:
  - disable = ASPM_L1_2 | ...              # L1, L1.1 enabled; L1.2 disabled
  + disable = 0                            # L1, L1.1, L1.2 all enabled

Enabling an L1.x substate removes the substate and L1 from the
"aspm_disable" mask.  After fb097dcd5a28, the substates were not added to
the mask when disabling L1, so enabling one substate implicitly enables all
of them.

Revert fb097dcd5a28 so enabling one substate doesn't enable the others.

Link: https://lore.kernel.org/r/c75931ac-7208-4200-9ca1-821629cf5e28@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: work through example in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/amd_nb: Use Family 19h Models 60h-7Fh Function 4 IDs

commit 2a565258b3f4bbdc7a3c09cd02082cb286a7bffc upstream.

Three PCI IDs for DF Function 4 were defined but not used.

Add them to the "link" list.

Fixes: f8faf3496633 ("x86/amd_nb: Add AMD PCI IDs for SMN communication")
Fixes: 23a5b8bb022c ("x86/amd_nb: Add PCI ID for family 19h model 78h")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803150430.3542854-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/net: ensure socket is marked connected on connect retry

commit f8f9ab2d98116e79d220f1d089df7464ad4e026d upstream.

io_uring does non-blocking connection attempts, which can yield some
unexpected results if a connect request is re-attempted by an an
application. This is equivalent to the following sync syscall sequence:

sock = socket(AF_INET, SOCK_STREAM | SOCK_NONBLOCK, IPPROTO_TCP);
connect(sock, &addr, sizeof(addr);

ret == -1 and errno == EINPROGRESS expected here. Now poll for POLLOUT
on sock, and when that returns, we expect the socket to be connected.
But if we follow that procedure with:

connect(sock, &addr, sizeof(addr));

you'd expect ret == -1 and errno == EISCONN here, but you actually get
ret == 0. If we attempt the connection one more time, then we get EISCON
as expected.

io_uring used to do this, but turns out that bluetooth fails with EBADFD
if you attempt to re-connect. Also looks like EISCONN _could_ occur with
this sequence.

Retain the ->in_progress logic, but work-around a potential EISCONN or
EBADFD error and only in those cases look at the sock_error(). This
should work in general and avoid the odd sequence of a repeated connect
request returning success when the socket is already connected.

This is all a side effect of the socket state being in a CONNECTING
state when we get EINPROGRESS, and only a re-connect or other related
operation will turn that into CONNECTED.

Cc: stable@vger.kernel.org
Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Link: https://github.com/axboe/liburing/issues/980
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: mptcp: fix wait_rm_addr/sf parameters

commit 9168ea02b898d3dde98b51e4bd3fb082bd438dab upstream.

The second input parameter of 'wait_rm_addr/sf $1 1' is misused. If it's
1, wait_rm_addr/sf will never break, and will loop ten times, then
'wait_rm_addr/sf' equals to 'sleep 1'. This delay time is too long,
which can sometimes make the tests fail.

A better way to use wait_rm_addr/sf is to use rm_addr/sf_count to obtain
the current value, and then pass into wait_rm_addr/sf.

Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-2-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: mptcp: run userspace pm tests slower

commit f4a75e9d11001481dca005541b6dc861e1472f03 upstream.

Some userspace pm tests failed are reported by CI:

112 userspace pm add & remove address
      syn                                 [ ok ]
      synack                              [ ok ]
      ack                                 [ ok ]
      add                                 [ ok ]
      echo                                [ ok ]
      mptcp_info subflows=1:1             [ ok ]
      subflows_total 2:2                  [ ok ]
      mptcp_info add_addr_signal=1:1      [ ok ]
      rm                                  [ ok ]
      rmsf                                [ ok ]
      Info: invert
      mptcp_info subflows=0:0             [ ok ]
      subflows_total 1:1                  [fail]
                         got subflows 0:0 expected 1:1
Server ns stats
TcpPassiveOpens                 2                  0.0
TcpInSegs                       118                0.0

This patch fixes them by changing 'speed' to 5 to run the tests much more
slowly.

Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-1-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eventfs: Check for NULL ef in eventfs_set_attr()

The top level events directory dentry does not have a d_fsdata set to a
eventfs_file pointer. This dentry is still passed to eventfs_set_attr().
It can not assume that the d_fsdata is set. Check for that.

Link: https://lore.kernel.org/all/20231112104158.6638-1-milian.wolff@kdab.com/
Fixes: 9aaee3eebc91 ("eventfs: Save ownership and mode")
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/kprobes: Fix the order of argument descriptions

[ Upstream commit f032c53bea6d2057c14553832d846be2f151cfb2 ]

The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.

int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
const char *name, const char *loc, ...)

Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/
Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: fsl-diu-fb: mark wr_reg_wa() static

[ Upstream commit a5035c81847430dfa3482807b07325f29e9e8c09 ]

wr_reg_wa() is not an appropriate name for a global function, and doesn't need
to be global anyway, so mark it static and avoid the warning:

drivers/video/fbdev/fsl-diu-fb.c:493:6: error: no previous prototype for 'wr_reg_wa' [-Werror=missing-prototypes]

Fixes: 0d9dab39fbbe ("powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Add support dual speaker for Dell

[ Upstream commit f0d9da19d7de9e845e7a93a901c4b9658df6b492 ]

Dell new platform support dual speaker. But BIOS verb table only show one speaker.
It will fill verb table for second speaker. Then bind with CS AMP model.

Fixes: de90f5165b1c ("ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/4dd390a77bf742b8a518ac2deee00b0f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: imsttfb: fix a resource leak in probe

[ Upstream commit aba6ab57a910ad4b940c2024d15f2cdbf5b7f76b ]

I've re-written the error handling but the bug is that if init_imstt()
fails we need to call iounmap(par->cmap_regs).

Fixes: c75f5a550610 ("fbdev: imsttfb: Fix use after free bug in imsttfb_probe")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: imsttfb: fix double free in probe()

[ Upstream commit e08c30efda21ef4c0ec084a3a9581c220b442ba9 ]

The init_imstt() function calls framebuffer_release() on error and then
the probe() function calls it again. It should only be done in probe.

Fixes: 518ecb6a209f ("fbdev: imsttfb: Fix error path of imsttfb_probe()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers

[ Upstream commit 403edfa436286b21f5ffe6856ae5b36396e8966c ]

The driver used to truncate several 64-bit registers such as PMCEID[n]
registers used to describe whether architectural and microarchitectural
events in range 0x4000-0x401f exist. Due to discarding the bits, the
driver made the events invisible, even if they existed.

Moreover, PMCCFILTR and PMCR registers have additional bits in the upper
32 bits. This patch makes them available although they aren't currently
used. Finally, functions handling PMXEVCNTR and PMXEVTYPER registers are
removed as they not being used at all.

Fixes: df29ddf4f04b ("arm64: perf: Abstract system register accesses away")
Reported-by: Carl Worth <carl@os.amperecomputing.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/..
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231102183012.1251410-1-ilkka@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies

[ Upstream commit c2ded280a4b1b7bd93e53670528504be08d24967 ]

Zynq QSPI driver has been converted to use spi-mem framework so
add spi-mem to driver kconfig dependencies.

Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1699037031-702858-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dapm: fix clock get name

[ Upstream commit 4bdcbc31ad2112385ad525b28972c45015e6ad70 ]

The name currently used to get the clock includes the dapm prefix.
It should use the name as provided to the widget, without the prefix.

Fixes: 3caac759681e ("ASoC: soc-dapm.c: fixup snd_soc_dapm_new_control_unlocked() error handling")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20231106103712.703962-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: hdmi-codec: register hpd callback on component probe

[ Upstream commit 15be353d55f9e12e34f9a819f51eb41fdef5eda8 ]

The HDMI hotplug callback to the hdmi-codec is currently registered when
jack is set.

The hotplug not only serves to report the ASoC jack state but also to get
the ELD. It should be registered when the component probes instead, so it
does not depend on the card driver registering a jack for the HDMI to
properly report the ELD.

Fixes: 25ce4f2b3593 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20231106104013.704356-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages

[ Upstream commit 004fc58edea6f00db9ad07b40b882e8d976f7a54 ]

Property 'playback-codecs' is referenced as 'speaker-codec' in the error
message, and this can lead to confusion.
Correct the error message such that the correct property name is
referenced.

Fixes: 0da16e370dd7 ("ASoC: mediatek: mt8186: add machine driver with mt6366, rt1019 and rt5682s")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231031103139.77395-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt712-sdca: fix speaker route missing issue

[ Upstream commit 1a3b7eab8500a6b923f7b62cc8aa4d832c7dfb3e ]

Sometimes the codec probe would be called earlier than the hardware initialization.
Therefore, the speaker route should be added before the the first_hw_init check.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Fixes: f3da2ed110e2 ("ASoC: rt1712-sdca: enable pm_runtime in probe, keep status as 'suspended'")?
Link: https://lore.kernel.org/r/20231030103644.1787948-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/syncobj: fix DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE

[ Upstream commit 101c9f637efa1655f55876644d4439e552267527 ]

If DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT is invoked with the
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE flag set but no fence has yet been
submitted for the given timeline point the call will fail immediately
with EINVAL. This does not match the intended behavior where the call
should wait until the fence has been submitted (or the timeout expires).

The following small example program illustrates the issue. It should
wait for 5 seconds and then print ETIME, but instead it terminates right
away after printing EINVAL.

  #include <stdio.h>
  #include <fcntl.h>
  #include <time.h>
  #include <errno.h>
  #include <xf86drm.h>
  int main(void)
  {
      int fd = open("/dev/dri/card0", O_RDWR);
      uint32_t syncobj;
      drmSyncobjCreate(fd, 0, &syncobj);
      struct timespec ts;
      clock_gettime(CLOCK_MONOTONIC, &ts);
      uint64_t point = 1;
      if (drmSyncobjTimelineWait(fd, &syncobj, &point, 1,
                                 ts.tv_sec * 1000000000 + ts.tv_nsec + 5000000000, // 5s
                                 DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE, NULL)) {
          printf("drmSyncobjTimelineWait failed %d\n", errno);
      }
  }

Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8")
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Reviewed by: Simon Ser <contact@emersion.fd>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/1fac96f1-2f3f-f9f9-4eb0-340f27a8f6c0@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: tests: Fix UAF in the mock helpers

[ Upstream commit cdcd6aef9db5797995d4153ea19fdf56d189f0e4 ]

The VC4 mock helpers allocate the CRTC, encoders and connectors using a
call to kunit_kzalloc(), but the DRM device they are attache to survives
for longer than the test itself which leads to use-after-frees reported
by KASAN.

Switch to drmm_kzalloc to tie the lifetime of these objects to the main
DRM device.

Fixes: f759f5b53f1c ("drm/vc4: tests: Introduce a mocking infrastructure")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYvJA2HGqzR9LGgq63v0SKaUejHAE6f7+z9cwWN-ourJ_g@mail.gmail.com/
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024105640.352752-1-mripard@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: Simplify buffer size computation in dlm_create_debug_file()

[ Upstream commit 19b3102c0b5350621e7492281f2be0f071fb7e31 ]

Use sizeof(name) instead of the equivalent, but hard coded,
DLM_LOCKSPACE_LEN + 8.

This is less verbose and more future proof.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

module/decompress: use kvmalloc() consistently

[ Upstream commit 17fc8084aa8f9d5235f252fc3978db657dd77e92 ]

We consistently switched from kmalloc() to vmalloc() in module
decompression to prevent potential memory allocation failures with large
modules, however vmalloc() is not as memory-efficient and fast as
kmalloc().

Since we don't know in general the size of the workspace required by the
decompression algorithm, it is more reasonable to use kvmalloc()
consistently, also considering that we don't have special memory
requirements here.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: perf: Do not broadcast to other cpus when starting a counter

[ Upstream commit 61e3d993c8bd3e80f8f1363ed5e04f88ab531b72 ]

This command:

$ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000

gives rise to this kernel warning:

[  444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436
[  444.364515] Modules linked in:
[  444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73
[  444.364771] Hardware name: riscv-virtio,qemu (DT)
[  444.364868] epc : smp_call_function_many_cond+0x42c/0x436
[  444.364917]  ra : on_each_cpu_cond_mask+0x20/0x32
[  444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800
[  444.364966]  gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0
[  444.364982]  t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0
[  444.364998]  s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000
[  444.365013]  a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100
[  444.365029]  a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000
[  444.365044]  s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98
[  444.365060]  s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000
[  444.365075]  s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001
[  444.365090]  s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6
[  444.365104]  t5 : 0000000400000000 t6 : ff60000002e010d0
[  444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[  444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436
[  444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32
[  444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa
[  444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66
[  444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac
[  444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c
[  444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e
[  444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96
[  444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52
[  444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98
[  444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a
[  444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da
[  444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a
[  444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114
[  444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a
[  444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46
[  444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74
[  444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e
[  444.365796] ---[ end trace 0000000000000000 ]---

That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic
in riscv SBI mmap support") was wrong since there is no need to broadcast
to other cpus when starting a counter, that's only needed in mmap when
the counters could have already been started on other cpus, so simply
remove this broadcast.

Fixes: 3fec323339a4 ("drivers: perf: Fix panic in riscv SBI mmap support")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Yu Chien Peter Lin <peterlin@andestech.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> #On
Link: https://lore.kernel.org/r/20231026084010.11888-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ti: icss-iep: fix setting counter value

[ Upstream commit 83b9dda8afa4e968d9cce253f390b01c0612a2a5 ]

Currently icss_iep_set_counter() writes the upper 32-bits of the
counter value to both the lower and upper counter registers, so
fix this by writing the appropriate value to the lower register.

Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Link: https://lore.kernel.org/r/20231107120037.1513546-1-diogo.ivo@siemens.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs

[ Upstream commit c4676f8dc1e12e68d6511f9ed89707fdad4c962c ]

The riscv_of_processor_hartid() used by riscv_of_parent_hartid() fails
for HARTs disabled in the DT. This results in the following warning
thrown by the RISC-V INTC driver for the E-core on SiFive boards:

[ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller

The riscv_of_parent_hartid() is only expected to read the hartid
from the DT so we directly call of_get_cpu_hwid() instead of calling
riscv_of_processor_hartid().

Fixes: ad635e723e17 ("riscv: cpu: Add 64bit hartid support on RV64")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20231027154254.355853-2-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: act_ct: Always fill offloading tuple iifidx

[ Upstream commit 9bc64bd0cd765f696fcd40fc98909b1f7c73b2ba ]

Referenced commit doesn't always set iifidx when offloading the flow to
hardware. Fix the following cases:

- nf_conn_act_ct_ext_fill() is called before extension is created with
nf_conn_act_ct_ext_add() in tcf_ct_act(). This can cause rule offload with
unspecified iifidx when connection is offloaded after only single
original-direction packet has been processed by tc data path. Always fill
the new nf_conn_act_ct_ext instance after creating it in
nf_conn_act_ct_ext_add().

- Offloading of unidirectional UDP NEW connections is now supported, but ct
flow iifidx field is not updated when connection is promoted to
bidirectional which can result reply-direction iifidx to be zero when
refreshing the connection. Fill in the extension and update flow iifidx
before calling flow_offload_refresh().

Fixes: 9795ded7f924 ("net/sched: act_ct: Fill offloading tuple iifidx")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections")
Link: https://lore.kernel.org/r/20231103151410.764271-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses

[ Upstream commit 80abbe8a8263106fe45a4f293b92b5c74cc9cc8a ]

The ipv6 redirect target was derived from the ipv4 one, i.e. its
identical to a 'dnat' with the first (primary) address assigned to the
network interface.  The code has been moved around to make it usable
from nf_tables too, but its still the same as it was back when this
was added in 2012.

IPv6, however, has different types of addresses, if the 'wrong' address
comes first the redirection does not work.

In Daniels case, the addresses are:
  inet6 ::ffff:192 ...
  inet6 2a01: ...

... so the function attempts to redirect to the mapped address.

Add more checks before the address is deemed correct:
1. If the packets' daddr is scoped, search for a scoped address too
2. skip tentative addresses
3. skip mapped addresses

Use the first address that appears to match our needs.

Reported-by: Daniel Huhardeaux <tech@tootai.net>
Closes: https://lore.kernel.org/netfilter/71be06b8-6aa0-4cf9-9e0b-e2839b01b22f@tootai.net/
Fixes: 115e23ac78f8 ("netfilter: ip6tables: add REDIRECT target")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: xt_recent: fix (increase) ipv6 literal buffer length

[ Upstream commit 7b308feb4fd2d1c06919445c65c8fbf8e9fd1781 ]

in6_pton() supports 'low-32-bit dot-decimal representation'
(this is useful with DNS64/NAT64 networks for example):

  # echo +aaaa:bbbb:cccc:dddd:eeee:ffff:1.2.3.4 > /proc/self/net/xt_recent/DEFAULT
  # cat /proc/self/net/xt_recent/DEFAULT
  src=aaaa:bbbb:cccc:dddd:eeee:ffff:0102:0304 ttl: 0 last_seen: 9733848829 oldest_pkt: 1 9733848829

but the provided buffer is too short:

  # echo +aaaa:bbbb:cccc:dddd:eeee:ffff:255.255.255.255 > /proc/self/net/xt_recent/DEFAULT
  -bash: echo: write error: Invalid argument

Fixes: 079aa88fe717 ("netfilter: xt_recent: IPv6 support")
Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: iproc: handle invalid slave state

[ Upstream commit ba15a14399c262f91ce30c19fcbdc952262dd1be ]

Add the code to handle an invalid state when both bits S_RX_EVENT
(indicating a transaction) and S_START_BUSY (indicating the end
of transaction - transition of START_BUSY from 1 to 0) are set in
the interrupt status register during a slave read.

Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
Fixes: 1ca1b4516088 ("i2c: iproc: handle Master aborted error")
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN

[ Upstream commit f968c56417f00be4cb62eadeed042a1e3c80dc53 ]

NETLINK_MAX_FMTMSG_LEN is currently hardcoded to 80, and we provide an
error printf-formatted string having 96 characters including the
terminating \0. Assuming each %d (representing a queue) gets replaced by
a number having at most 2 digits (a reasonable assumption), the final
string is also 96 characters wide, which is too much.

Reduce the verbiage a bit by removing some (partially) redundant words,
which makes the new printf-formatted string be 73 characters wide with
the trailing newline.

Fixes: 800db2d125c2 ("net: enetc: ensure we always have a minimum number of TXQs for stack")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202311061336.4dsWMT1h-lkp@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231106160311.616118-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()

[ Upstream commit 34c4effacfc329aeca5635a69fd9e0f6c90b4101 ]

KMSAN reported the following uninit-value access issue:

=====================================================
BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

Uninit was stored to memory at:
virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline]
virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

Uninit was created at:
slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x2fd/0x770 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline]
virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58
virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline]
virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: vsock-loopback vsock_loopback_work
=====================================================

The following simple reproducer can cause the issue described above:

int main(void)
{
  int sock;
  struct sockaddr_vm addr = {
    .svm_family = AF_VSOCK,
    .svm_cid = VMADDR_CID_ANY,
    .svm_port = 1234,
  };

  sock = socket(AF_VSOCK, SOCK_STREAM, 0);
  connect(sock, (struct sockaddr *)&addr, sizeof(addr));
  return 0;
}

This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the
`struct virtio_vsock_hdr` are not initialized when a new skb is allocated
in `virtio_transport_init_hdr()`. This patch resolves the issue by
initializing these fields during allocation.

Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Reported-and-tested-by: syzbot+0c8ce1da0ac31abbadcd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0c8ce1da0ac31abbadcd
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231104150531.257952-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: respect userspace disabling IFF_MULTICAST

[ Upstream commit 8999ce4cfc87e61b4143ec2e7b93d8e92e11fa7f ]

So far we ignore the setting of IFF_MULTICAST. Fix this and clear bit
AcceptMulticast if IFF_MULTICAST isn't set.

Note: Based on the implementations I've seen it doesn't seem to be 100% clear
what a driver is supposed to do if IFF_ALLMULTI is set but IFF_MULTICAST
is not. This patch is based on the understanding that IFF_MULTICAST has
precedence.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/4a57ba02-d52d-4369-9f14-3565e6c1f7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock/virtio: remove socket from connected/bound list on shutdown

[ Upstream commit 3a5cc90a4d1756072619fe511d07621bdef7f120 ]

If the same remote peer, using the same port, tries to connect
to a server on a listening port more than once, the server will
reject the connection, causing a "connection reset by peer"
error on the remote peer. This is due to the presence of a
dangling socket from a previous connection in both the connected
and bound socket lists.
The inconsistency of the above lists only occurs when the remote
peer disconnects and the server remains active.

This bug does not occur when the server socket is closed:
virtio_transport_release() will eventually schedule a call to
virtio_transport_do_close() and the latter will remove the socket
from the bound and connected socket lists and clear the sk_buff.

However, virtio_transport_do_close() will only perform the above
actions if it has been scheduled, and this will not happen
if the server is processing the shutdown message from a remote peer.

To fix this, introduce a call to vsock_remove_sock()
when the server is handling a client disconnect.
This is to remove the socket from the bound and connected socket
lists without clearing the sk_buff.

Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Tested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-core: use pr_warn_ratelimited() in bio_check_ro()

[ Upstream commit 1b0a151c10a6d823f033023b9fdd9af72a89591b ]

If one of the underlying disks of raid or dm is set to read-only, then
each io will generate new log, which will cause message storm. This
environment is indeed problematic, however we can't make sure our
naive custormer won't do this, hence use pr_warn_ratelimited() to
prevent message storm in this case.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Fixes: 57e95e4670d1 ("block: fix and cleanup bio_check_ro")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20231107111247.2157820-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: fix uaf in nbd_open

[ Upstream commit 327462725b0f759f093788dfbcb2f1fd132f956b ]

Commit 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and
blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set
disk->private_data as NULL as before. UAF may be triggered in nbd_open()
if someone tries to open nbd device right after nbd_put() since nbd has
been free in nbd_dev_remove().

Fix this by implementing ->free_disk and free private data in it.

Fixes: 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231107103435.2074904-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tg3: power down device only on SYSTEM_POWER_OFF

[ Upstream commit 9fc3bc7643341dc5be7d269f3d3dbe441d8d7ac3 ]

Dell R650xs servers hangs on reboot if tg3 driver calls
tg3_power_down.

This happens only if network adapters (BCM5720 for R650xs) were
initialized using SNP (e.g. by booting ipxe.efi).

The actual problem is on Dell side, but this fix allows servers
to come back alive after reboot.

Signed-off-by: George Shuklin <george.shuklin@gmail.com>
Fixes: 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231103115029.83273-1-george.shuklin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix VF-VF direction matching in drop rule in switchdev

[ Upstream commit 68c51db3a16d258e730dd1c04a1de2f7ab038ddf ]

When adding a drop rule on a VF, rule direction is not being set, which
results in it always being set to ingress (ICE_ESWITCH_FLTR_INGRESS
equals 0). Because of this, drop rules added on port representors don't
match any packets.

To fix it, set rule direction in drop action to egress when netdev is a
port representor, otherwise set it to ingress.

Fixes: 0960a27bd479 ("ice: Add direction metadata")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix VF-VF filter rules in switchdev mode

[ Upstream commit 8b3c8c55ccbc02920b0ae6601c66df24f0d833bd ]

Any packet leaving VSI i.e VF's VSI is considered as
egress traffic by HW, thus failing to match the added
rule.

Mark the direction for redirect rules as below:
1. VF-VF - Egress
2. Uplink-VF - Ingress
3. VF-Uplink - Egress
4. Link_Partner-Uplink - Ingress
5. Link_Partner-VF - Ingress

Fixes: 0960a27bd479 ("ice: Add direction metadata")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Aniruddha Paul <aniruddha.paul@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: lag: in RCU, use atomic allocation

[ Upstream commit e1db8c2a01d7e12bd566106fbeefa3c5cccd2003 ]

Sleeping is not allowed in RCU read-side critical sections.
Use atomic allocations under rcu_read_lock.

Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Fixes: 41ccedf5ca8f ("ice: implement lag netdev event handler")
Fixes: 3579aa86fb40 ("ice: update reset path for SRIOV LAG support")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix SRIOV LAG disable on non-compliant aggregate

[ Upstream commit 3e39da4fa16c9c09207d98b8a86a6f6436b531c9 ]

If an attribute of an aggregate interface disqualifies it from supporting
SRIOV, the driver will unwind the SRIOV support. Currently the driver is
clearing the feature bit for all interfaces in the aggregate, but this is
not allowing the other interfaces to unwind successfully on driver unload.

Only clear the feature bit for the interface that is currently unwinding.

Fixes: bf65da2eb279 ("ice: enforce interface eligibility and add messaging for SRIOV LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: boot: Fix creation of loader.bin

[ Upstream commit 57a4542cb7c9baa1509c3366b57a08d75b212ead ]

When flashing loader.bin for K210 using kflash:

[ERROR] This is an ELF file and cannot be programmed to flash directly: arch/riscv/boot/loader.bin

Before, loader.bin relied on "OBJCOPYFLAGS := -O binary" in the main
RISC-V Makefile to create a boot image with the right format. With this
removed, the image is now created in the wrong (ELF) format.

Fix this by adding an explicit rule.

Fixes: 505b02957e74f0c5 ("riscv: Remove duplicate objcopy flag")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/1086025809583809538dfecaa899892218f44e7e.1698159066.git.geert+renesas@glider.be
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix error-handling for io_uring nvme-passthrough

[ Upstream commit 1147dd0503564fa0e03489a039f9e0c748a03db4 ]

Driver may return an error before submitting the command to the device.
Ensure that such error is propagated up.

Fixes: 456cba386e94 ("nvme: wire-up uring-cmd support for io-passthru on char-device.")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: put sk reference if close work was canceled

[ Upstream commit aa96fbd6d78d9770323b21e2c92bd38821be8852 ]

Note that we always hold a reference to sock when attempting
to submit close_work. Therefore, if we have successfully
canceled close_work from pending, we MUST release that reference
to avoid potential leaks.

Fixes: 42bfba9eaa33 ("net/smc: immediate termination for SMCD link groups")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: allow cdc msg send rather than drop it with NULL sndbuf_desc

[ Upstream commit c5bf605ba4f9d6fbbb120595ab95002f4716edcb ]

This patch re-fix the issues mentioned by commit 22a825c541d7
("net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()").

Blocking sending message do solve the issues though, but it also
prevents the peer to receive the final message. Besides, in logic,
whether the sndbuf_desc is NULL or not have no impact on the processing
of cdc message sending.

Hence that, this patch allows the cdc message sending but to check the
sndbuf_desc with care in smc_cdc_tx_handler().

Fixes: 22a825c541d7 ("net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix dangling sock under state SMC_APPFINCLOSEWAIT

[ Upstream commit 5211c9729484c923f8d2e06bd29f9322cc42bb8f ]

Considering scenario:

smc_cdc_rx_handler
__smc_release
sock_set_flag
smc_close_active()
sock_set_flag

__set_bit(DEAD) __set_bit(DONE)

Dues to __set_bit is not atomic, the DEAD or DONE might be lost.
if the DEAD flag lost, the state SMC_CLOSED will be never be reached
in smc_close_passive_work:

if (sock_flag(sk, SOCK_DEAD) &&
smc_close_sent_any_close(conn)) {
sk->sk_state = SMC_CLOSED;
} else {
/* just shutdown, but not yet closed locally */
sk->sk_state = SMC_APPFINCLOSEWAIT;
}

Replace sock_set_flags or __set_bit to set_bit will fix this problem.
Since set_bit is atomic.

Fixes: b38d732477e4 ("smc: socket closing and linkgroup cleanup")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>