Perry Yuan [Tue, 1 Nov 2022 16:50:17 +0000 (00:50 +0800)]
drm/amd/display: change GPU match with IP version for Vangogh
Use ip versions (10,3,1) to match the GPU after Vangogh switched to use IP
discovery path.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Thu, 29 Sep 2022 16:18:20 +0000 (00:18 +0800)]
drm/amdgpu: add Vangogh APU flag to IP discovery path
Add the missing apu flag for Vangogh when using IP discovery code path
to initialize IPs
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Thu, 3 Nov 2022 18:45:00 +0000 (17:45 -0100)]
drm/amd/display: don't enable DRM CRTC degamma property for DCE
DM maps DRM CRTC degamma to DPP (pre-blending) degamma block, but DCE doesn't
support programmable degamma curve anywhere. Currently, a custom degamma is
accepted by DM but just ignored by DCE driver and degamma correction isn't
actually applied. There is no way to map custom degamma in DCE, therefore, DRM
CRTC degamma property shouldn't be enabled for DCE drivers.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 7 Nov 2022 01:37:34 +0000 (20:37 -0500)]
drm/amd/display: 3.2.212
DC version 3.2.212 brings along the following fixes:
- Fix DPIA AUX timeout issue
- Add HUBP surface flip interrupt handler
- Fix dpms_off issue when disabling bios mode
- Update SubVP Visual Confirm
- Program pipes for ODM when removing planes
- Use min transition for all SubVP plane add/remove
- Support parsing VRAM info v3.0 from VBIOS
- Enable dchub request limit for NV32
- Workaround to increase phantom pipe vactive in pipesplit
- Fix dcn3.1x mode validation on high bandwidth config
- Check context constructed for pipe split flags after pipesplit
- Align phantom pipe dst/src scaling with main for subvp
- Fix calculation for cursor CAB allocation
- Fix unbounded requesting for high pixel rate modes on dcn315
- Revert Disable DRR actions during state commit
- Fix array index out of bound error in bios parser
- Fix optc2_configure warning on dcn314
- Fix Subvp phantom pipe transition
- Fix prefetch calculations for dcn32
- Use uclk pstate latency for fw assisted mclk validation dcn32
- Set max for prefetch lines on dcn32
- Rework macros for DWB register access
- Adjust DP 8b10b LT exit behavior
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sun, 6 Nov 2022 01:57:07 +0000 (21:57 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.143.0
- New boot options to enable USB4 DP BW Allocation mode in DPIA
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ilya Bakoulin [Wed, 2 Nov 2022 19:56:16 +0000 (15:56 -0400)]
drm/amd/display: Adjust DP 8b10b LT exit behavior
[Why]
Polling SINK_STATUS DPCD can cause some non-DP2.0 LTTPR hubs to hang and
no longer respond to AUX.
[How]
As a workaround for the problem hubs, and also to more closely match
DP spec 8b10b behavior, don't poll for intra-hop AUX reply indication
on 8b10b-encoded links.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Fri, 6 May 2022 15:04:15 +0000 (11:04 -0400)]
drm/amd/display: rework macros for DWB register access
[Why]
A hack was used to access DWB register due to difference in the register
naming convention which was not compatible with existing SR/SRI* macros.
The additional macro needed were added to dwb ip specific header file
(dcnxx_dwb.h) instead of soc resource file (dcnxx_resource.c). Due to
this pattern, BASE macro had to be redefined in dcnxx_dwb.h, which in
turn needed us to undefine them in the resource file.
[How]
Add a separate macro for DWB access to the resource files that need it
instead of defining them in DWB ip header file. This will enable us to
reuse the BASE macro defined in the resource file.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Thu, 3 Nov 2022 22:40:01 +0000 (18:40 -0400)]
drm/amd/display: Set max for prefetch lines on dcn32
[WHY?]
Max number of lines that can be used for prefetch due to type constraints is
63.75.
[HOW?]
Enforce maximum prefetch lines as 63.75.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Thu, 3 Nov 2022 22:38:13 +0000 (18:38 -0400)]
drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32
[WHY?]
DCN32 uses fclk pstate watermarks for dummy pstate, and must always be
supported.
[HOW?]
Validation needs to be run with fclk pstate latency set
as the dummy pstate latency to get correct prefetch and bandwidth outputs.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Thu, 3 Nov 2022 22:33:38 +0000 (18:33 -0400)]
drm/amd/display: Fix prefetch calculations for dcn32
[Description]
Prefetch calculation loop was not exiting until utilizing all of vstartup if it
failed once. Locals need to be reset on each iteration of the loop.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 4 Nov 2022 15:06:42 +0000 (11:06 -0400)]
drm/amd/display: Fix Subvp phantom pipe transition
[Description]
- When transitioning a pipe in use (non-phantom) to become
a phantom pipe, we must fully disable the pipe first before
doing any phantom pipe programming
- Move phantom OTG enablement to after "regular" front-end
programming sequence (including wait for vupdate)
- If a pipe is being transitioned into a phantom pipe,
fully disable it first
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 3 Nov 2022 21:33:07 +0000 (17:33 -0400)]
drm/amd/display: Fix optc2_configure warning on dcn314
[Why]
dcn314 uses optc2_configure_crc() that wraps
optc1_configure_crc() + set additional registers
not applicable to dcn314.
It's not critical but when used leads to warning like:
WARNING: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c
Call Trace:
<TASK>
generic_reg_set_ex+0x6d/0xe0 [amdgpu]
optc2_configure_crc+0x60/0x80 [amdgpu]
dc_stream_configure_crc+0x129/0x150 [amdgpu]
amdgpu_dm_crtc_configure_crc_source+0x5d/0xe0 [amdgpu]
[How]
Use optc1_configure_crc() directly
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Wed, 2 Nov 2022 19:35:53 +0000 (15:35 -0400)]
drm/amd/display: fix array index out of bound error in bios parser
[Why&How]
Firmware headers dictate that gpio_pin array only has a size of 8. The
count returned from vbios however is greater than 8.
Fix this by not using array indexing but incrementing the pointer since
gpio_pin definition in atomfirmware.h is hardcoded to size 8
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Thu, 3 Nov 2022 15:35:44 +0000 (11:35 -0400)]
drm/amd/display: revert Disable DRR actions during state commit
why and how:
causes unstable on certain surface format/mpo transitions
This reverts commit
de020e5fa9ebc6fc32e82ae6ccb0282451ed937c
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 1 Nov 2022 20:10:49 +0000 (16:10 -0400)]
drm/amd/display: Don't check output BPP for phantom
[Description]
- If we're enabling phantom pipe for a high
link rate display we could
fail DML on the phantom pipe since it's
set to virtual signal
- Therefore don't consider Output BPP for
phantom pipe
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Tue, 1 Nov 2022 21:09:11 +0000 (17:09 -0400)]
drm/amd/display: fix unbounded requesting for high pixel rate modes on dcn315
Unbounded requesting is getting configured for odm mode calculations which
is incorrect. This change checks whether mode requires odm ahead of time.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Wed, 2 Nov 2022 03:03:03 +0000 (23:03 -0400)]
drm/amd/display: Fix calculation for cursor CAB allocation
[Why]
The cursor size (in memory) is currently incorrectly calculated,
resulting not enough CAB being allocated for static screen cursor
in MALL refresh. This results in cursor image corruption.
[How]
Use cursor pitch instead of cursor width when calculating cursor size.
Update num cache lines calculation to use the result of the cursor size
calculation instead of manually recalculating again.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Wed, 2 Nov 2022 19:28:47 +0000 (15:28 -0400)]
drm/amd/display: Align phantom pipe dst/src scaling with main for subvp
[WHY?]
Subvp src/dst stream rectangles are not being created with the same scaling
factors as the main stream.
[HOW?]
Make sure subvp stream src rectangle scales its height to have the same src/dst
ratio as the main stream.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Mon, 31 Oct 2022 23:08:23 +0000 (19:08 -0400)]
drm/amd/display: Check context constructed for pipe split flags is still valid
[WHY?]
After applying pipesplit flags, DML can select a different configuration upon
revalidation, despite the desired one still being valid.
[HOW?]
Check the configuration is still has mode support, and apply it.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Wed, 2 Nov 2022 16:13:43 +0000 (12:13 -0400)]
drm/amd/display: fix dcn3.1x mode validation on high bandwidth config
[why]
1. correct dram_channel_width (was hard coded to 4 for 32bit)
2. use dm's is_hvm_enable status flag for hostvm_en input for dml.
3. add a function to override to all dcn3.1x.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Tue, 1 Nov 2022 04:16:56 +0000 (00:16 -0400)]
drm/amd/display: Workaround to increase phantom pipe vactive in pipesplit
[Why]
Certain high resolution displays exhibit DCC line corruption with SubVP
enabled. This is likely due to insufficient DCC meta data buffered
immediately after the mclk switch.
[How]
Add workaround to increase phantom pipe vactive height by
meta_row_height number of lines, thus increasing the amount of meta data
buffered immediately after mclk switch finishes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Wed, 2 Nov 2022 19:19:37 +0000 (15:19 -0400)]
drm/amd/display: enable dchub request limit for DCN 3.2.x
[why]
HW recommend we enable this for better DF QoS for DCN 3.2.x
[how]
Add interfaces to hubbub to program register
Add initialization as part of init_hw
Add default settings for DCN 3.2.x
Add registry override for debug/tuning
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Wed, 2 Nov 2022 19:06:48 +0000 (15:06 -0400)]
drm/amd/display: Support parsing VRAM info v3.0 from VBIOS
[Why]
For DCN3.2 and DCN3.21, VBIOS has switch to using v3.0 of the VRAM
info struct. We should read and override the VRAM info in driver with
values provided by VBIOS to support memory downbin cases.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Fri, 7 Oct 2022 15:01:08 +0000 (11:01 -0400)]
drm/amd/display: use low clocks for no plane configs
Stream only configurations do not require DCFCLK, SOCCLK, DPPCLK
or FCLK. They also always allow pstate change.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Wed, 2 Nov 2022 16:38:12 +0000 (12:38 -0400)]
drm/amd/display: Use min transition for all SubVP plane add/remove
[Description]
- Whenever disabling a phantom pipe, we must run through the
minimal transition sequence
- In the case where SetVisibility = false for the main pipe,
we also need to run through the min transtion when disabling
the phantom pipes
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Tue, 1 Nov 2022 20:38:20 +0000 (16:38 -0400)]
drm/amd/display: Program pipes for ODM when removing planes
[WHY?]
Software state expects pipes to be configured for ODM, but due to the transition
occurring on a plane disable, the ODM enablement code is not run.
[HOW?]
Update ODM when removing a plane, and dynamic ODM is active. Also acquire pipe
lock when removing a plane.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Liu Xi [Wed, 2 Nov 2022 15:15:34 +0000 (11:15 -0400)]
drm/amd/display: clean up some irq service code for dcn201
[Why and how]
Clean up some irq service code for dcn201.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Liu Xi <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Galiffi [Sat, 22 Oct 2022 02:22:46 +0000 (22:22 -0400)]
drm/amd/display: Update SubVP Visual Confirm
[Why]
The visual confirm bar is displayed on all displays, but is only
updated on a flip. If an update causes SubVP to be disabled on
all displays, but there are no updates on the other displays, it
will lead to stale information displayed on the non-active
displays. An example of this is playing a fullscreen video on a
rotated display.
[How]
Add a procedure to update visual confirm color for all pipes when
committing a plane.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhongwei Zhang [Fri, 28 Oct 2022 05:40:31 +0000 (13:40 +0800)]
drm/amd/display: fix dpms_off issue when disabling bios mode
[Why]
disable_vbios_mode_if_required() will set dpms_off to false
during boot when pixel clk dismatches with driver requires.
This will cause extra backlight on and off if OS call 2
times setmode.
[How]
Set dpms_off to true to keep power_off and
let OS control BL by display's powerState.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stylon Wang [Wed, 26 Oct 2022 13:00:40 +0000 (21:00 +0800)]
drm/amd/display: Fix invalid DPIA AUX reply causing system hang
[Why]
Some DPIA AUX replies have incorrect data length from original request.
This could lead to overwriting of destination buffer if reply length is
larger, which could cause invalid access to stack since many destination
buffers are declared as local variables.
[How]
Check for invalid length from DPIA AUX replies and trigger a retry if
reply length is not the same as original request. A DRM_WARN() dmesg log
is also produced.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Candice Li [Sat, 12 Nov 2022 08:24:20 +0000 (16:24 +0800)]
drm/amdgpu: Add psp_13_0_10_ta firmware to modinfo
TA firmware loaded on psp v13_0_10, but it is missing in modinfo.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Mon, 31 Oct 2022 18:58:12 +0000 (14:58 -0400)]
drm/amd/display: Add HUBP surface flip interrupt handler
On IGT, there is a test named amd_hotplug, and when the subtest basic is
executed on DCN31, we get the following error:
[drm] *ERROR* [CRTC:71:crtc-0] flip_done timed out
[drm] *ERROR* flip_done timed out
[drm] *ERROR* [CRTC:71:crtc-0] commit wait timed out
[drm] *ERROR* flip_done timed out
[drm] *ERROR* [CONNECTOR:88:DP-1] commit wait timed out
[drm] *ERROR* flip_done timed out
[drm] *ERROR* [PLANE:59:plane-3] commit wait timed out
After enable the page flip log with the below command:
echo -n 'format "[PFLIP]" +p' > /sys/kernel/debug/dynamic_debug/control
It is possible to see that the flip was submitted, but DC never replied
back, which generates time-out issues. This is an indication that the
HUBP surface flip is missing. This commit fixes this issue by adding
hubp1_set_flip_int to DCN31.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stylon Wang [Mon, 24 Oct 2022 07:36:16 +0000 (15:36 +0800)]
drm/amd/display: Fix access timeout to DPIA AUX at boot time
[Why]
Since introduction of patch "Query DPIA HPD status.", link detection at
boot could be accessing DPIA AUX, which will not succeed until
DMUB outbox messaging is enabled and results in below dmesg logs:
[ 160.840227] [drm:amdgpu_dm_process_dmub_aux_transfer_sync [amdgpu]] *ERROR* wait_for_completion_timeout timeout!
[How]
Enable DMUB outbox messaging before link detection at boot time.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Alex Deucher [Tue, 19 Jul 2022 18:18:41 +0000 (14:18 -0400)]
drm/amdgpu: clarify DC checks
There are several places where we don't want to check
if a particular asic could support DC, but rather, if
DC is enabled. Set a flag if DC is enabled and check
for that rather than if a device supports DC or not.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 19 Jul 2022 17:15:40 +0000 (13:15 -0400)]
drm/amdgpu: move non-DC vblank handling out of irq code
Move it into the DCE code for each generation. This avoids
confusion with the different display paths.
v2: no need for a hotplug worker for vkms
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 19 Jul 2022 16:13:08 +0000 (12:13 -0400)]
drm/amdgpu: rework SR-IOV virtual display handling
virtual display is enabled unconditionally in SR-IOV, but
without specifying the virtual_display module, the number
of crtcs defaults to 0. Set a single display by default
for SR-IOV if the virtual_display parameter is not set.
Only enable virtual display by default on SR-IOV on asics
which actually have display hardware.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 19 Jul 2022 14:48:19 +0000 (10:48 -0400)]
drm/amdgpu: use proper DC check in amdgpu_display_supported_domains()
amdgpu_device_asic_has_dc_support() just checks the asic itself.
amdgpu_device_has_dc_support() is a runtime check which not
only checks the asic, but also other things in the driver
like whether virtual display is enabled. We want the latter
here.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zha [Fri, 11 Nov 2022 05:33:53 +0000 (13:33 +0800)]
drm/amdgpu: Remove programming GCMC_VM_FB_LOCATION* on gfxhub_v3_0_3 in VF
[Why]
GCMC_VM related registers should be programmed by PSP on host side.
L1 and RLCG will block these regisers on VF.
[How]
Remove programming GCMC_VM_FB_LOCATION_BASE/TOP on gfxhub_v3_0_3 under SRIOV VF.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YuBiao Wang [Thu, 10 Nov 2022 06:53:10 +0000 (14:53 +0800)]
drm/amdgpu: Stop clearing kiq position during unload
Do not clear kiq position in RLC_CP_SCHEDULER so that CP could perform
IDLE-SAVE after VF fini. CPG also needs to be active in save command.
v2: drop unused variable (Alex)
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dong Chenchen [Thu, 10 Nov 2022 14:33:14 +0000 (22:33 +0800)]
drm/amdgpu: Fix memory leak in amdgpu_cs_pass1
When p->gang_size equals 0, amdgpu_cs_pass1() will return directly
without freeing chunk_array, which will cause a memory leak issue,
this patch fixes it.
Fixes:
4624459c84d7 ("drm/amdgpu: add gang submit frontend v6")
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Liu Jian [Wed, 9 Nov 2022 09:31:22 +0000 (17:31 +0800)]
drm/amd/display: delete the duplicate .set_odm_bypass initialization in dcn314_tg_funcs
Fix below sparse warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:244:18: warning: Initializer entry defined twice
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:257:18: also defined here
Fixes:
5ade1b951dec ("drm/amd/display: Add OTG/ODM functions")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paulo Miguel Almeida [Wed, 9 Nov 2022 07:33:34 +0000 (20:33 +1300)]
drm/amdgpu: Replace one-element array with flex-array member
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in structs _ATOM_CONNECTOR_DEVICE_TAG_RECORD,
_ATOM_OBJECT_GPIO_CNTL_RECORD, _ATOM_BRACKET_LAYOUT_RECORD,
_ATOM_BRACKET_LAYOUT_RECORD, _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3,
_ATOM_FUSION_SYSTEM_INFO_V3, _ATOM_I2C_DATA_RECORD,
_ATOM_I2C_DEVICE_SETUP_INFO, _ATOM_ASIC_MVDD_INFO and refactor the
rest of the code accordingly. While at it, removed a redundant casting.
Important to mention is that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ville Syrjälä [Mon, 7 Nov 2022 19:25:39 +0000 (21:25 +0200)]
drm/amdgpu: Use drm_mode_init() for on-stack modes
Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.
Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;
@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1
@@
expression decl.E;
@@
- &*E
+ E
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gavin Wan [Wed, 9 Nov 2022 18:12:42 +0000 (13:12 -0500)]
drm/amdgpu: Ignore stop rlc on SRIOV environment.
For SRIOV, the guest driver should not do stop rlc. The host
handles programing RLC.
On SRIOV, the stop rlc will be hang (RLC related registers are
blocked by policy) when the RLCG interface is not enabled.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tong Liu01 [Thu, 10 Nov 2022 09:31:36 +0000 (17:31 +0800)]
drm/amdgpu: add vram reservation based on vram_usagebyfirmware_v2_2
Move TMR region from top of FB to 2MB for FFBM, so we need to
reserve TMR region firstly to make sure TMR can be allocated at 2MB
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Thu, 10 Nov 2022 06:37:08 +0000 (14:37 +0800)]
drm/amdgpu: remove the check of init status in psp_ras_initialize
The initialized status indicates RAS TA is loaded, but in some cases
(such as RAS fatal error) RAS TA could be destroyed although it's not
unloaded. Hence we load RAS TA unconditionally here.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Thu, 10 Nov 2022 02:52:41 +0000 (10:52 +0800)]
drm/amd/pm: skip disabling all smu features on smu_v13_0_10 in suspend
skip disabling all smu features on smu_v13_0_10 in suspend
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zhang [Wed, 26 Oct 2022 02:55:10 +0000 (10:55 +0800)]
drm/amdgpu: force read discovery file if set discovery=2
If discovery is set to 2 in module parameters explicitly, the
intention is to use the discovery file in FW rather than the one in
BIOS, usually because the latter is incorrect. This patch to force
read discovery file if set discovery=2.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrew Davis [Wed, 26 Oct 2022 16:19:35 +0000 (11:19 -0500)]
drm: Move radeon and amdgpu Kconfig options into their directories
Most Kconfig options to enable a driver are in the Kconfig file
inside the relevant directory, move these two to the same.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Takashi Iwai [Mon, 24 Oct 2022 15:40:54 +0000 (17:40 +0200)]
drm/radeon: Add HD-audio component notifier support (v6)
This patch adds the support for the notification of HD-audio hotplug
via the already existing drm_audio_component framework to radeon
driver. This allows us more reliable hotplug notification and ELD
transfer without accessing HD-audio bus; it's more efficient, and more
importantly, it works without waking up the runtime PM.
The implementation is rather simplistic: radeon driver provides the
get_eld ops for HD-audio, and it notifies the audio hotplug via
pin_eld_notify callback upon each radeon_audio_enable() call.
The pin->id is referred as the port number passed to the notifier
callback, and the corresponding connector is looked through the
encoder list in the get_eld callback in turn.
The bind and unbind callbacks handle the device-link so that it
assures the PM call order.
Also, as a gratis bonus, this patch "fixes" the regression by the
recent change in HD-audio to be more strict for the HDMI/DP
connection, too. Since the HD-audio HDMI/DP codec requires both the
connection bit and the valid ELD to be provided, it started failing on
some RADEON gfx boards where the ELD update performed instably. As
this change switches the communication to a direct way between the
audio and the graphics drivers, now the system receives the proper
ELD, and the HDMI/DP hotplug starts working again.
[ v2: fix the logic in radeon_audio_component_get_eld to walk the
connector list since that is where the EDID lives and we can
derive the encoder from the connector because the encoder has
not been assigned at this point (i.e., during monitor probe).
v3: the component binding is moved outside radeon_audio_init() and
_fini(), as those are called from suspend/resume, too.
Drop modeset lock calls that caused Oops.
Moved Kconfig change so that it can be applied on older kernels.
v4: revive drm_modeset_lock*() again, add the missing
device_link_remove() call at unbinding
v5: squash in mutex fix
v6: squash in fix for audio get_eld callback ]
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1569
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Fri, 26 Aug 2022 22:22:35 +0000 (18:22 -0400)]
drm/amdgpu: Set MTYPE in PTE based on BO flags
The same BO may need different MTYPEs and SNOOP flags in PTEs depending
on its current location relative to the mapping GPU. Setting MTYPEs from
clients ahead of time is not practical for coherent memory sharing.
Instead determine the correct MTYPE for the desired coherence model and
current BO location when updating the page tables.
To maintain backwards compatibility with MTYPE-selection in
AMDGPU_VA_OP_MAP, the coherence-model-based MTYPE selection is only
applied if it chooses an MTYPE other than MTYPE_NC (the default).
Add two AMDGPU_GEM_CREATE_... flags to indicate the coherence model. The
default if no flag is specified is non-coherent (i.e. coarse-grained
coherent at dispatch boundaries).
Update amdgpu_amdkfd_gpuvm.c to use this new method to choose the
correct MTYPE depending on the current memory location.
v2:
* check that bo is not NULL (e.g. PRT mappings)
* Fix missing ~ bitmask in gmc_v11_0.c
v3:
* squash in "drm/amdgpu: Inherit coherence flags on dmabuf import"
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Wed, 9 Nov 2022 17:06:27 +0000 (12:06 -0500)]
drm/amd/display: only fill dirty rectangles when PSR is enabled
Currently, we are calling fill_dc_dirty_rects() even if PSR isn't
supported by the relevant link in amdgpu_dm_commit_planes(), this is
undesirable especially because when drm.debug is enabled we are printing
messages in fill_dc_dirty_rects() that are only useful for debugging PSR
(and confusing otherwise). So, we can instead limit the filling of dirty
rectangles to only when PSR is enabled.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
LongJun Tang [Fri, 4 Nov 2022 09:29:31 +0000 (17:29 +0800)]
drm/amd/display: Have risk for memory exhaustion
In dcn*_clock_source_create when dcn*_clk_src_construct fails allocated
clk_src needs release. A local attack could use this to cause memory
exhaustion.
Signed-off-by: LongJun Tang <tanglongjun@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paulo Miguel Almeida [Mon, 7 Nov 2022 09:32:51 +0000 (22:32 +1300)]
drm/amdgpu: Replace 1-element array with flexible-array member
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in structs _ATOM_GPIO_PIN_ASSIGNMENT,
_ATOM_DISPLAY_OBJECT_PATH, _ATOM_DISPLAY_OBJECT_PATH_TABLE,
_ATOM_OBJECT_TABLE and refactor the rest of the code accordingly.
Important to mention is that doing a build before/after this patch results
in no functional binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hanjun Guo [Fri, 4 Nov 2022 09:50:02 +0000 (17:50 +0800)]
drm/radeon: Add the missed acpi_put_table() to fix memory leak
When the radeon driver reads the bios information from ACPI
table in radeon_acpi_vfct_bios(), it misses to call acpi_put_table()
to release the ACPI memory after the init, so add acpi_put_table()
properly to fix the memory leak.
v2: fix text formatting (Alex)
Fixes:
268ba0a99f89 ("drm/radeon: implement ACPI VFCT vbios fetch (v3)")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harsh Jain [Wed, 2 Nov 2022 09:53:08 +0000 (15:23 +0530)]
drm/amdgpu: complete gfxoff allow signal during suspend without delay
change guarantees that gfxoff is allowed before moving further in
s2idle sequence to add more reliablity about gfxoff in amdgpu IP's
suspend flow
Signed-off-by: Harsh Jain <harsh.jain@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Luben Tuikov [Mon, 7 Nov 2022 17:38:03 +0000 (12:38 -0500)]
drm/amdgpu: Decouple RAS EEPROM addresses from chips
Abstract RAS I2C EEPROM addresses from chip names, and set their macro
definition names to the address they set, not the chip they attach
to. Since most chips either use I2C EEPROM address 0 or 40000h for the RAS
table start offset, this leaves us with only two macro definitions as
opposed to five, and removes the redundancy of four.
Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Luben Tuikov [Mon, 7 Nov 2022 17:06:44 +0000 (12:06 -0500)]
drm/amdgpu: Remove redundant I2C EEPROM address
Remove redundant EEPROM_I2C_MADDR_54H address, since we already have it
represented (ARCTURUS), and since we don't include the I2C device type
identifier in EEPROM memory addresses, i.e. that high up in the device
abstraction--we only use EEPROM memory addresses, as memory is continuously
represented by EEPROM device(s) on the I2C bus.
Add a comment describing what these memory addresses are, how they come
about and how they're usually extracted from the device address byte.
Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes:
c9bdc6c3cf39df ("drm/amdgpu: Add EEPROM I2C address support for ip discovery")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ma Jun [Sun, 6 Nov 2022 03:43:06 +0000 (11:43 +0800)]
drm/amdkfd: Make kfd_fill_cache_non_crat_info() as static
kfd_fill_cache_non_crat_info() is only used in kfd_topology.c,
so make it as static.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Tue, 8 Nov 2022 00:30:36 +0000 (08:30 +0800)]
drm/amd/pm: enable mode1 reset on smu_v13_0_10
enable mode1 reset and prioritize debug port on smu_v13_0_10
as a more reliable message processing
v2 - move mode1 reset callback to smu_v13_0_0_ppt.c
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ma Jun [Sun, 6 Nov 2022 12:34:27 +0000 (20:34 +0800)]
drm/amdkfd: Fix the memory overrun
Fix the memory overrun issue caused by wrong array size.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527133 ("Memory - corruptions")
Fixes:
c0cc999f3c32e6 ("drm/amdkfd: Fix the warning of array-index-out-of-bounds")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Mon, 7 Nov 2022 08:46:59 +0000 (16:46 +0800)]
drm/amdgpu: disable BACO on special BEIGE_GOBY card
Still avoid intermittent failure.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 2 Nov 2022 20:55:31 +0000 (16:55 -0400)]
drm/amdgpu: Drop eviction lock when allocating PT BO
Re-take the eviction lock immediately again after the allocation is
completed, to fix circular locking warning with drm_buddy allocator.
Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are
called from multiple files.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 3 Nov 2022 14:24:52 +0000 (10:24 -0400)]
drm/amdgpu: Unlock bo_list_mutex after error handling
Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest
application.
If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as
caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the
kernel WARNING.
Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to
cleanup bo_list userptr bo.
WARNING: kfdtest/2930 still has locks held!
1 lock held by kfdtest/2930:
(&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu]
stack backtrace:
dump_stack_lvl+0x44/0x57
get_signal+0x79f/0xd00
arch_do_signal_or_restart+0x36/0x7b0
exit_to_user_mode_prepare+0xfd/0x1b0
syscall_exit_to_user_mode+0x19/0x40
do_syscall_64+0x40/0x80
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sun, 30 Oct 2022 23:20:05 +0000 (19:20 -0400)]
drm/amd/display: 3.2.211
DC version 3.2.211 brings along the following fixes:
- Wait for VBLANK during pipe programming
- Adding HDMI SCDC DEVICE_ID define
- Cursor update refactor: PSR-SU support condition
- Update 709 gamma to 2.222 as stated in the standerd
- Consider dp cable id only when data is non zero
- Waiting for 1 frame to fix the flash issue on PSR1
- Update SR watermarks for DCN314
- Allow tuning DCN314 bounding box
- Zeromem mypipe heap struct before using it
- Use min transition for SubVP into MPO
- Disable phantom OTG after enable for plane disable
- Disable DRR actions during state commit
- Fix fallback issues for DP LL 1.4a tests
- Fix FCLK deviation and tool compile issues
- Fix reg timeout in enc314_enable_fifo
- Fix gpio port mapping issue
- Only update link settings after successful MST link train
- Enforce minimum prefetch time for low memclk on DCN32
- Set correct EOTF and Gamut flag in VRR info
- Add margin for max vblank time for SubVP + DRR
- Populate DP2.0 output type for DML pipe
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asher Song [Thu, 3 Nov 2022 10:28:40 +0000 (18:28 +0800)]
Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly""
This reverts commit
4545ae2ed3f2f7c3f615a53399c9c8460ee5bca7.
The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine.
Test failure is caused by test case self.
Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rajneesh Bhardwaj [Wed, 20 Apr 2022 16:28:20 +0000 (12:28 -0400)]
drm/amdgpu: Fix the kerneldoc description
amdgpu_ttm_tt_set_userptr() is also called by the KFD as part of
initializing the user pages for userptr BOs and also while initializing
the GPUVM for a KFD process so update the function description.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 15 Apr 2022 01:29:38 +0000 (21:29 -0400)]
drm/amd/display: Populate DP2.0 output type for DML pipe
[Why]
DCN3.2 DML logic uses a new output type for DP2.0,
which will enable validation to pass for higher BW
timings that require DP2.0 link rates.
[How]
Populate the DML pipe with DP2.0 output type if
the signal type of the pipe_ctx is 128b/132b.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jasdeep.dhillon@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Sun, 30 Oct 2022 19:56:53 +0000 (15:56 -0400)]
drm/amd/display: Add margin for max vblank time for SubVP + DRR
[Description]
- Incorporate FW delays as port of max VTOTAL calculated for
SubVP + DRR cases (since it is part of the microschedule).
- Also add margin for the max VTOTAL possible for SubVP + DRR cases.
- Due to rounding errors in FW (integer arithmetic), the microschedule
calculation can get pushed to the next frame (incorrectly) in cases
where we use the max VTOTAL possible to complete the MCLK switch.
- When the rounding error occurs, we are only off by 1-2 lines,
use 40us margin which is working consistently.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mike Hsieh [Tue, 4 Oct 2022 06:58:07 +0000 (14:58 +0800)]
drm/amd/display: Set correct EOTF and Gamut flag in VRR info
[Why] FreeSync always use G2.2 EOTF and Native gamut
[How] Set EOTF and Gamut flags accordingly
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Mike Hsieh <Mike.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Thu, 27 Oct 2022 20:22:26 +0000 (16:22 -0400)]
drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32
[WHY?]
Data return times when using lowest memclk can be <= 60us, which can cause
underflow on high bandwidth displays with a workload.
[HOW?]
Enforce a minimum prefetch time during validation for low memclk modes.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Thu, 20 Oct 2022 19:57:36 +0000 (15:57 -0400)]
drm/amd/display: Only update link settings after successful MST link train
[WHY]
Currently driver reduces verified link caps on DPIA devices if a link is
trained at a link rate below the max rate verified during link detection.
This blocks high bandwidth modes after setting a low bandwidth mode.
[HOW]
Only update link rate after a successful link train if link is MST.
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Steve Su [Thu, 27 Oct 2022 21:52:32 +0000 (05:52 +0800)]
drm/amd/display: Fix gpio port mapping issue
[Why]
1. Port of gpio has different mapping.
[How]
1. Add a dummy entry in mapping table.
2. Fix incorrect mask bit field access.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Steve Su <steve.su@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 27 Oct 2022 19:34:33 +0000 (15:34 -0400)]
drm/amd/display: Fix reg timeout in enc314_enable_fifo
[Why]
The link enablement sequence can end up resetting the encoder while
the PHY symclk isn't yet on.
This means that waiting for symclk on will timeout, along with the reset
bit never asserting high.
This causes unnecessary delay when enabling the link and produces a
warning affecting multiple IGT tests.
[How]
Don't wait for the symclk to be on here because firmware already does.
Don't wait for reset if we know the symclk isn't on.
Split the reset into a helper function that checks the bit and decides
whether or not a delay is sufficient.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chaitanya Dhere [Thu, 27 Oct 2022 13:51:19 +0000 (09:51 -0400)]
drm/amd/display: Fix FCLK deviation and tool compile issues
[Why]
Recent backports from open source do not have header inclusion pattern
that is consistent with inclusion style in the rest of the file. This
breaks the internal tool builds as well. A recent commit erronously
modified the original DML formula for calculating
ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation
from the golden values.
[How]
Change the way in which display_mode_vba.h is included so that it is
consistent with the inclusion style in rest of the file which also fixes
the tool build. Restore the DML formula to its original state to fix the
FCLK deviation.
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mustapha Ghaddar [Wed, 26 Oct 2022 17:54:27 +0000 (13:54 -0400)]
drm/amd/display: Fix fallback issues for DP LL 1.4a tests
[WHY]
Unlike DP or USBC, the USB4 link does not get its own encoder and
has to share therefore verify_caps is skipped.
[HOW]
Fix the fallback logic for automated tests and take that
into consideration for LT and LS.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Fri, 21 Oct 2022 23:06:10 +0000 (19:06 -0400)]
drm/amd/display: Disable DRR actions during state commit
[WHY]
Committing a state while performing DRR actions can cause underflow.
[HOW]
Disabled features performing DRR actions during state commit.
Need to follow-up on why DRR actions affect state commit.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 27 Oct 2022 14:51:15 +0000 (10:51 -0400)]
drm/amd/display: Disable phantom OTG after enable for plane disable
[Description]
- Need to disable phantom OTG after it's enabled
in order to restore it to it's original state.
- If it's enabled and then an MCLK switch comes in
we may not prefetch the correct data since the phantom
OTG could already be in the middle of the frame.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 20 Oct 2022 22:33:05 +0000 (18:33 -0400)]
drm/amd/display: Use min transition for SubVP into MPO
[Description]
- For SubVP transitioning into MPO, we want to
use a minimal transition to prevent transient
underflow
- Transitioning a phantom pipe directly into a
"real" pipe can result in underflow due to the
HUBP still having it's "phantom" programming
when HUBP is unblanked (have to wait for next
VUPDATE of the new OTG)
- Also ensure subvp pipe lock is acquired early
enough for programming in dc_commit_state_no_check
- When disabling phantom planes, enable phantom OTG
first so the disable gets the double buffer update
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 20 Oct 2022 21:26:24 +0000 (17:26 -0400)]
drm/amd/display: Zeromem mypipe heap struct before using it
[Why&How]
Bug was caused when moving variable from stack to heap because it was reusable
and garbage was left over, so we need to zero mem.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 25 Oct 2022 15:31:30 +0000 (11:31 -0400)]
drm/amd/display: Allow tuning DCN314 bounding box
[Why]
We're missing the helpers from dcn20 that would allow
overriding these with DC debug options.
[How]
Use dcn20_patch_bounding_box to support overriding all the
relevant values.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 25 Oct 2022 15:26:04 +0000 (11:26 -0400)]
drm/amd/display: Update SR watermarks for DCN314
[Why & How]
New values requested by hardware after fine-tuning.
Update for all memory types.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ryan Lin [Wed, 26 Oct 2022 07:12:26 +0000 (15:12 +0800)]
drm/amd/display: Waiting for 1 frame to fix the flash issue on PSR1
[Why]
Needs more frames waiting before the PSR_Exit sending for the specific
TCON.
[How]
Add relock_delay_frame_cnt to control how many frames waiting are needed
before the PSR_Exit sending. The default value is 0. The Driver side can
set this variable for specific TCONs.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Mon, 24 Oct 2022 16:18:41 +0000 (12:18 -0400)]
drm/amd/display: Consider dp cable id only when data is non zero
Cable ID is a DP2 feature to identify max certified link rate that
a cable can carry. The cable identification method requires both
cable and display hardware support. Since the specs comes late, it is
anticipated that the first round of DP2 cables and displays may not
be fully compatible to reliably return cable ID data. Therefore the
decision of our cable id policy is that if the cable can return non
zero cable id data, we will take cable's link rate capability into
account. However if we get zero data, the cable link rate capability
is considered inconclusive. In this case, we will not take cable's
capability into account to avoid of over limiting hardware capability
from users. The max overall link rate capability is still determined
after actual dp pre-training. Cable id is considered as an auxiliary
method of determining max link bandwidth capability.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nawwar Ali [Wed, 19 Oct 2022 09:57:06 +0000 (17:57 +0800)]
drm/amd/display: Update 709 gamma to 2.222 as stated in the standerd
[WHY]
Previously driver use gamma 2.2 for 709 color space,
but the standard is to use gamma of 2.222
[HOW]
Change it gamma to 2.222
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nawwar Ali <nawwar.ali@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Max Tseng [Mon, 17 Oct 2022 12:55:36 +0000 (20:55 +0800)]
drm/amd/display: Cursor update refactor: PSR-SU support condition
[Why]
PSR-SU requires extra conditions while cursor update.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Max Tseng <Max.Tseng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Ma [Thu, 15 Sep 2022 16:03:04 +0000 (12:03 -0400)]
drm/amd/display: Adding HDMI SCDC DEVICE_ID define
[Why && How]
We will need to differentiate vendor behavior in the future.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Mon, 24 Oct 2022 17:39:02 +0000 (13:39 -0400)]
drm/amd/display: Wait for VBLANK during pipe programming
[Description]
- Wait for vblank during front end programming
for global sync to ensure all double buffer
updates take.
- This prevents underflow in some cases.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 2 Nov 2022 13:55:13 +0000 (14:55 +0100)]
drm/amdgpu: workaround for TLB seq race
It can happen that we query the sequence value before the callback
had a chance to run.
Workaround that by grabbing the fence lock and releasing it again.
Should be replaced by hw handling soon.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org # 5.19+
Fixes:
5255e146c99a6 ("drm/amdgpu: rework TLB flushing")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2113
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Stefan Springer <stefanspr94@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Tue, 1 Nov 2022 19:02:48 +0000 (15:02 -0400)]
drm/amdkfd: Fix error handling in criu_checkpoint
Checkpoint BOs last. That way we don't need to close dmabuf FDs if
something else fails later. This avoids problematic access to user mode
memory in the error handling code path.
criu_checkpoint_bos has its own error handling and cleanup that does not
depend on access to user memory.
In the private data, keep BOs before the remaining objects. This is
necessary to restore things in the correct order as restoring events
depends on the events-page BO being restored first.
Fixes:
be072b06c739 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects")
Reported-by: Jann Horn <jannh@google.com>
CC: Rajneesh Bhardwaj <Rajneesh.Bhardwaj@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Thu, 3 Nov 2022 21:01:46 +0000 (17:01 -0400)]
drm/amdkfd: Fix error handling in kfd_criu_restore_events
mutex_unlock before the exit label because all the error code paths that
jump there didn't take that lock. This fixes unbalanced locking errors
in case of restore errors.
Fixes:
40e8a766a761 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Thu, 3 Nov 2022 03:05:19 +0000 (11:05 +0800)]
drm/amd/pm: update SMU IP v13.0.4 msg interface header
Some of the unused messages that were used earlier in development have
been freed up as spare messages, no intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Wed, 9 Nov 2022 00:48:44 +0000 (10:48 +1000)]
Merge branch '00.06-gr-ampere' of https://gitlab.freedesktop.org/skeggsb/nouveau into drm-next
This is the pull request for a whole bunch of fixes and prep-work that
was done to support Ampere acceleration prior to GSP-RM being
available. It uses the ACR firmware released by NVIDIA in
linux-firmware, as we do on earlier GPUs. The work to support running
on top of GSP-RM also heavily depends on various pieces of this
series.
In addition to the new HW support, general stability of the driver
should be improved, especially around recovering HW from bugs that can
be generated by userspace driver components.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==s+nZD0n7CuRWLPE=Pj+02CN13r+ZQJxoHQ_EmR+o=XQ@mail.gmail.com
Ben Skeggs [Wed, 1 Jun 2022 10:48:35 +0000 (20:48 +1000)]
drm/nouveau/gr/ga102: initial support
v2:
- whitespace
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Ben Skeggs [Wed, 1 Jun 2022 10:48:34 +0000 (20:48 +1000)]
drm/nouveau/ltc/ga102: initial support
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Ben Skeggs [Wed, 1 Jun 2022 10:48:33 +0000 (20:48 +1000)]
drm/nouveau/acr/ga102: initial support
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Ben Skeggs [Wed, 1 Jun 2022 10:48:32 +0000 (20:48 +1000)]
drm/nouveau/fb/ga102: load and boot VPR scrubber FW
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Ben Skeggs [Wed, 1 Jun 2022 10:48:22 +0000 (20:48 +1000)]
drm/nouveau/gr/tu102: remove gv100_grctx_unkn88c
Match RM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Ben Skeggs [Wed, 1 Jun 2022 10:48:21 +0000 (20:48 +1000)]
drm/nouveau/gr/tu102: add gv100_gr_init_4188a4
Match RM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Ben Skeggs [Wed, 1 Jun 2022 10:48:21 +0000 (20:48 +1000)]
drm/nouveau/gr/tu102-: fix support for sw_bundle64_init
We weren't sending the high bits, though they're zero currently anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>