rtmp2/client: Make sure 'code' is not NULL

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1403>

webrtcbin: Don't duplicate enum string values

Some were leaked when debugging was enabled. Instead just directly use the
static strings as-is.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3347>

gstpad: Avoid race in (un)setting EOS flag on sinkpads

The scenario is the following:

* Thread 1 is pushing an EOS event on a sinkpad
* Thread 2 is pushing a STREAM_START event on the same sinkpad before Thread 1
returns. Note : It starts pushing the event after Thread 1 took the object lock.

There is a potential race between:

* The moment Thread 1 sets the EOS flag once it has finished sending the
event (via store_sticky_event). When it does that it has both the STREAM and
OBJECT lock

* The moment Thread 2 sends the STREAM_START event (Which should release that
EOS status), but removing the EOS flag is only done while holding the OBJECT
lock and not the STREAM_LOCK, which means it could be re-set by Thread 1 before
it then checks again the EOS flag (without the STREAM lock taken).

The EOS flag unsetting by STREAM_START should be done with the STREAM lock
taken, otherwise it will be racy.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1452

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3320>

videocodectestsink: Add YUV422 support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3331>

gst-inspect: print doc urls for Rust plugins

We have documentation for them now after all.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3346>

qtdemux: use unsigned int types to store result of QT_UINT32

In a few cases throughout qtdemux, the results of QT_UINT32 were being
stored in a signed integer, which could cause subtle bugs in the case of
an integer overflow, even allowing the the result to equal a negative
number!

This patch prevents this by simply storing the results of this function
call properly in an unsigned integer type. Additionally, we fix up the
length checking with stsd parsing to prevent cases of child atoms
exceeding their parent atom sizes.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3344>

d3d11videosink: Always clear back buffer on resize

Swapchain may not need to be resized if the size of backbuffer
is equal to the previous size. Then previously rendered frame will be stay
on the screen. Do clear back buffer whenever resize() is called

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3341>

subparse: Fix non-closed tag handling.

Unclear what the goal was, but we could end up reading way past the next_tag.

Instead just move everything from after the end tag ('>') to the next_tag.

Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=53040

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3340>

avutils: Add missing space in doc

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3330>

avviddec: Initialize std_compliance to default

This was missed in the initial patch.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3330>

qsv: Fix encoding error when input memory belongs to other GPU

Copy frame if VA display of input buffer is different from that
of encoder, like we've been doing on Windows

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3335>

identity: fix "handoff" signal docs

The docs list an extra pad argument, which doesn't
match the actual signal function signature. Probably
a copy'n'paste mistake when copying things from fakesink.

Fixes #1546

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3337>

va: baseenc: Do not import the VA surface from other display.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1167
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>

va: compositor: Do not use allocator and pool from other display.

Just like the va decoder, the compositor should not use allocator
and pool from other display. Also, when importing the input buffer,
if it is from other display, we should fallback to memory copy.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1167
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>

va: basetransform: Do not use allocator and pool from other display.

Just like the va decoder, the vpp and deinterlace should not use allocator
and pool from other display. Also, when importing the input buffer, if it
is from other display, we should fallback to memory copy.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1167
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>

va: basedec: Do not use allocator and pool from other display.

The command line such as:
  gst-launch-1.0 -vf filesrc location=1.264 ! h264parse !
  vah264dec ! varenderD129postproc ! fakesink
The decoder here gets the allocation proposal from the vpp which is
on another GPU device. The allocator and pool belong to other display
and should not be used in the decoder.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1167
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>

libs: va: Add API to peek the va buffer's display.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>

libs: va: Add API to peek the va memory's display.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>

libs: va: Add API to peek the allocator's display.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>

libs: va: Fix code style in gstvaallocator.h

Replace all tabs with spaces.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>

d3dvideosink: Update plugin description

Direct3D is too generic (there are various version numbers).
Clarify that this element is using the Direct3D9 API

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3333>

qt: initialize GError properly in gst_qt_get_gl_wrapcontext()

Spotted by Claus Stovgaard.

Fixes #1545

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3327>

gst-env: import exit from sys

On windows the Cmd Prompt for VS 2019 complains
that exit is not defined.

  File "C:/data/gstreamer/gst-env.py", line 622, in <module>
    exit(subprocess.call(args, close_fds=False, env=env))

NameError: name 'exit' is not defined
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3324>

qtmux: Add durations to raw audio buffers from the raw audio adapter in prefill mode

This ensures that a duration can also be calculated and stored for the
last buffer at EOS.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3321>

qtmux: Release object lock before posting an error message

GST_ELEMENT_ERROR() also takes the object lock and this would then
deadlock.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3321>

gst-validate-1.0: Don't leak arguments and context

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

validate-scenario: Don't leak temporary path value

It's only use in the structure iterator

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

validate-scenario: Don't leak temporary local variables structures

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

lv2: Don't leak plugin information on registration

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

ladspa: Don't leak plugin information on registration

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

fdkaacenc: Properly terminate GEnumValue table

It should be terminated with a NULL entry, otherwise we just stray into the
realms of cryptographic libraries^W^W random memory usage.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

libav: avcfg: Avoid brittle comparision

Subtracting a gint from another (or a guint from another) has no guarantees that
it will result in a gint.

Therefore do the actual comparision instead.

Also use the *actual* type for comparing flags (the field value types are different)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

libav: avcfg: Don't leak duplicate enumvalue entries

If we discard the duplicates, we also need to free the allocated strings.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

imagesequencesrc; Fix leaks

* The path was leaked
* The custom buffer was never freed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

qtdemux: Fix cenc-related leaks

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

deinterlace: Don't leak metas

There is no correlation between the frame being NULL and the metas not being
present.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

validate: plug some leaks

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

adaptivedemux2: Fix collection leaks

* The collection on the period was never unreffed
* The collection in the message handler was never unreffed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

parsebin: Fix leak

Release the reference on the collection which was given to us when extracting it
from the event/message.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>

mssdemux2: Update for adaptivedemux2 refactoring

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

adaptivedemux2: Move stream_seek() to the Stream class

Move the last stream specific vfunc from the demux
class to the stream class.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

adaptivedemux2: Refactor stream methods into the stream

Unlike the legacy elements, GstAdaptiveDemuxStream is a GObject now,
so a bunch of things that were actually stream methods on the
parent demux object can directly become stream methods now.

Move the stream class out to a header of its own.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

hlsdemux2/m3u8: Implement EXT-X-GAP parsing

Read the EXT-X-GAP tag and set is_gap on the segment.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

hlsdemux2/m3u8: Refactor parsing for readability

Small readability improvements in the parsing code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

adaptivedemux2/downloadhelper: Remove return val for download_request_add_buffer()

The function can't actually fail, and the only caller
was ignoring the result anyway, so remove the return value.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

adaptivedemux2/downloadhelper: Add debug output of response headers

Dump the HTTP response headers at TRACE level

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

adaptivedemux2/downloadhelper: Don't mark transfer as complete/error if cancelled.

If the state of the download request was reset to UNSENT,
it was cancelled. Don't update the state to COMPLETE or ERRORED
in on_read_ready().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

adaptivedemux2/downloadhelper: Ignore spurious read failure

Sometimes g_input_stream_read_all_finish() can return
0 bytes, but still succeed (return TRUE) and have more
data available later. Only finish the transfer
if it returns 0 bytes *and* FALSE with no error.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

adaptivedemux2/downloadhelper: Fix function name

Fix a typo in the name of function download_request_despatch_progress()

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

adaptivedemux2: Remove scheduler_lock mutex

Remove the old unused scheduler_lock

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

adaptivedemux2: Hold tracks lock accessing input_period

The input_period is protected by the TRACKS_LOCK,
so make sure to hold that when accessing it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

adaptivedemux2: Add state checks and clean up obsolete variables

The cancelled flag was only set in the stream finalize()
method, after all activity on the stream has stopped anyway.
Replace uses of cancelled with checks on the stream state.

Remove the replaced flag, which was checked but never set
to TRUE anywhere any more.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>

gstpad: Fix non-serialized sticky event push

With non-serialized sticky events, such as GST_EVENT_INSTANT_RATE, we both want
to store the event (for later re-linking) *AND* push the event in a non-blocking
way.

We therefore must *not* propagate pending sticky events if the event is "sticky
or serialized" but only if it's "serialized"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3254>

srt: Remove callers for which srt_bstats fails

This keeps them from accumulating in the element and in the stats while
the sink is not being fed, as long as we at least periodically grab
stats.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3156>

srt: Use simpler list operations for callers

Avoid `g_list_append` and `g_list_remove` (which have to scan the list)
and replace them with `g_list_prepend` and `g_list_delete_link`.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3156>

srt: Clean up poll/sock lifecycle

Make sure `srtobject->poll_id` is never invalid as long as `srtobject`
exists. Only remove our caller socket from it when the socket becomes
invalid.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3156>

srt: Clean up error handling

- Make the srt_epoll_wait loops more uniform.

- Error only via GError when possible; let the element send the error
  message. Avoids a second error message.

- Return 0 when cancelled. Avoids an error message from the element.

- Don't send an error message from send_headers when we're a server
  sink.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3156>

srt: Simplify socket stats

Don't hide stats depending on whether we're a sending or receiving
socket. While we're here, add some more debug logs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3156>

srt: Replace stats accumulation with naive byte counting

srt_bstats cannot be used to get the stats of closed connections, so the
best we can do is keep the running count ourselves.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3156>

directshow: Validate enumerated AM_MEDIA_TYPE struct

The video info struct can be null if format is undefined

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3323>

vpx: Complete high bitdepth vp9 en/decoding support

Adding 12bits variant formats to en/decoder, and high bitdepth
4:4:4 (except for GBR) encoding support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3298>

vpx: Define formats for compatibility

ifdef for enum values never work. Instead, define new enum type
and use it

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3298>

examples: d3d11: Fix GCC build error/warning

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3318>

qsvjpegenc: Add support for YUY2 format

Now GstD3D11 defines YUY2 format

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3316>

qsv: Add JPEG decoder

Because DXVA does not define JPEG decoding, we need this
vendor specific API for Windows

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3316>

d3d11: Add support for YUY2 format

YUY2 is a primary YUV 4:2:2 format for DXVA.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3316>

doc: avviddec: Update plugin cache

This is to add std-compliance property and GstFFMpegVidDec base class.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3311>

avviddec: Introduce a class for shared properties

Without a parent class,the documentation would need to be duplicated for
every CODECs. This patch adds an abstract class in between GstVideoDecoder
and the element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3311>

avviddec: Expose std-compliance option

Default compliance mode (i.e., FF_COMPLIANCE_NORMAL) might not
strictly follow specification. This property will allow user
to specifiy expected compliance mode.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3311>

parse: do delayed set only if the target child was not found and fail otherwise

When using the child proxy notation (child::property=value) it may
happen that the target child does not exist at the time of parsing
(i.e: decodebin creates the encoder according to the contents of the
stream). On this cases, we want to delay the setting of the property
to later, when new elements are added. Previous logic performed a
delayed set even if the target child was found but the property
was not found in it. This should be treated as a failure because,
unlike missing elements, properties should not appear dynamically.
By not failing, typos in property names may go unnoticed to the end
user.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2908>

childproxy: Implement a new ::get_child_by_name_recurse() API

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2908>

msdkcontext: use gst_object_unref instead of g_object_unref

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3301>

msdkcontext: use gst_object_ref for GstVaDisplay

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3301>

msdkcontext: g_object_new() must not return nullptr

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3301>

msdkenc: use GST_CAPS_FEATURE_MEMORY_VA to check the feature

Add macros to protect sinkpad_is_va(), since it is not defined on
Windows.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3301>

wpe: fix wpevideosrc gst-play example

wpe:// no longer works since 1.20, see wpesrc examples.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3306>

vah264enc: Added option to insert CEA-708 closed captions

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2910>

qsv: Check 16K resolution support

... and remove duplicated code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3310>

vulkan: Mark gst_vulkan_image_view_new create_info as constant pointer

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1615>

vulkan: Remove unnecessary null checks

These null checkes are slightly misleading when double-checking
mutability for external language interop.  None of the functions in
these files allow the variable at hand to become `NULL` under normal
operation, because they are checked at initialization and never (allowed
to be) reassigned to `NULL`.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1615>

vulkan: Add missing `(nullable)` annotation to `Returns`

Most of these functions already state they might return `%NULL`, but
this is not picked up by G-IR.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1615>

vulkan: Add missing `array length` and `(out)` annotation to parameters

Add `array length` annotation for `layouts` such that `n_layouts` is
properly marked as its length, and add `(out)` where a function returns
in that parameter.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1615>

hlsdemux2: m3u8: Use PDT to offset stream time when aligning playlist

When matching segments across playlists with Program-Date-Times,
use the difference in segment PDTs to adjust the stream time
that's being transferred. This can fix cases where the
segment boundaries don't align across different streams
and the first download gets thrown away once the PTS
is seen and found not to match.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3309>

hlsdemux2: Download new header when it changes

Check whether the init file / MAP data for a segment
is different to the current data and trigger an
update if so. Previously, the header would only
be checked in HLS after switching bitrate or
after a seek / first download.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3307>

m3u8: Expose GstM3U8InitFile methods

Exposure ref/unref methods for the GstM3U8InitFile type,
and add a gst_m3u8_init_file_equal() comparison method.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3307>

subprojects: orc: bump to 0.4.33

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3304>

d3d11decoder: Fix for VP9 decoding with odd resolution

Fixing off by one mismatch when width and/or height of stream
is odd number

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3302>

qsv: Add VP9 decoder

Recent Intel GPU supports 12bits VP9 decoding but only VP9
profile2 with 10bits is defined by DXVA spec.
Thus, we need this vendor specific decoder element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3290>

adaptivedemux2: Improve minimum buffering threshold

Previously the minimum buffering threshold was hardcoded to a specific
value (10s). This is suboptimal this an actual value will depend on the actual
stream being played.

This commit sets the low watermark threshold in time to 0, which is an automatic
mode. Subclasses can provide a stream `recommended_buffering_threshold` when
update_stream_info() is called.

Currently implemented for HLS, where we recommended 1.5 average segment
duration. This will result in buffering being at 100% when the 2nd segment has
been downloaded (minus a bit already being consumed downstream)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3240>

d3d11vp9dec: Disallow Profile2 12bits stream

Since DXVA does not support the format, specify bit-depth field
to sinkpad template caps so that d3d11vp9dec can be skipped
during autoplugging

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3297>

vp9parse: Set subsampling to src caps even if GBR stream

Some muxer elements will need the subsampling information

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3297>

vp9parse: Delaying src caps until frame is parsed if profile > 0

subsampling and/or bitdepth information will be required for
negotiation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3297>

fdkaacenc: Update documentation to clarify bitrate and peak-bitrate

bitrate property is only applicable for constant bitrate and
peak-bitrate is only applicable for variable bitrate. Clarify
the same.

fdkaacenc: Add support for setting bitrate mode

fdkaacenc: Add support for setting peak bitrate

fdkaacenc: Add support for enabling afterburner

This is an additional quality parameter. In the default configuration this
quality switch is deactivated because it would cause a workload increase
which might be significant. If workload is not an issue in the application
it can be recommended to activate this feature.

fdkaacdec: Do not report decoding error for flush request

A flush request is done when set_format is called to empty internal bit
buffer maintained by fdk-aac. When this happens, during the explicit
call to handle_buffer, decodeFrame does not return a AAC_DEC_OK. This
gets reported as a decoding error while no decoding error in fact took
place. Since this can be confusing, just return a GST_FLOW_OK and log
that an explicit flush was requested.

wavparse: Speed up type finding for DTS

In order to figure out if the "raw" audio contained within the wav
container is actually DTS, right now we call the typefinder helper
which runs all typefinders.

Speed up this type finding process by specifying the extension.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3294>

playbin3: Fix missing pad unref

GST_TRACERS="leaks" GST_DEBUG="GST_TRACER:7,leaks:6" gst-play-1.0 --use-playbin3 test.mkv

When running a pipeline like above, leaks are observed.

0:00:56.882419132 240637 0x5562c528ccc0 TRACE             GST_TRACER :0:: object-alive, type-name=(string)GstConcatPad, address=(gpointer)0x7efd7c0d20a0, description=(string)<'':sink_0>, ref-count=(uint)1, trace=(string);
0:00:56.882429131 240637 0x5562c528ccc0 TRACE             GST_TRACER :0:: object-alive, type-name=(string)GstConcatPad, address=(gpointer)0x7efd7c0d2be0, description=(string)<'':sink_0>, ref-count=(uint)1, trace=(string);
0:00:56.882437056 240637 0x5562c528ccc0 TRACE             GST_TRACER :0:: object-alive, type-name=(string)GstConcatPad, address=(gpointer)0x7efd7c0d3720, description=(string)<'':sink_0>, ref-count=(uint)1, trace=(string);

gst_element_release_request_pad does not unref the pad. It needs to
be followed by gst_object_unref. Doing that fixes the above leaks.

Use g_ptr_array_new_with_free_func with gst_object_unref as the free
function to unref the pad after release.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3177>

pbutils: add correct mime mapping for vp9

Based on https://www.webmproject.org/vp9/mp4/#codecs-parameter-string

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3260>